Merge ../linux-2.6
diff --git a/arch/powerpc/configs/mpc85xx_cds_defconfig b/arch/powerpc/configs/mpc85xx_cds_defconfig
new file mode 100644
index 0000000..9bb022a
--- /dev/null
+++ b/arch/powerpc/configs/mpc85xx_cds_defconfig
@@ -0,0 +1,846 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.16
+# Sun Apr 2 11:23:42 2006
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_DEFAULT_UIMAGE is not set
+
+#
+# Processor support
+#
+# CONFIG_CLASSIC32 is not set
+# CONFIG_PPC_52xx is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+CONFIG_85xx=y
+CONFIG_E500=y
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_MPIC=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Platform support
+#
+# CONFIG_MPC8540_ADS is not set
+CONFIG_MPC85xx_CDS=y
+CONFIG_MPC8540=y
+CONFIG_PPC_INDIRECT_PCI_BE=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+CONFIG_MATH_EMULATION=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_PPC_I8259=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_IDEDISK is not set
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+CONFIG_E1000_NAPI=y
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_UNWIND_INFO is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index 778f22f..dbcb859 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -22,6 +22,7 @@
#include <linux/elf.h>
#include <linux/elfcore.h>
#include <linux/init.h>
+#include <linux/irq.h>
#include <linux/types.h>
#include <asm/processor.h>
@@ -174,6 +175,8 @@
void default_machine_crash_shutdown(struct pt_regs *regs)
{
+ unsigned int irq;
+
/*
* This function is only called after the system
* has paniced or is otherwise in a critical state.
@@ -186,6 +189,16 @@
*/
local_irq_disable();
+ for_each_irq(irq) {
+ struct irq_desc *desc = irq_descp(irq);
+
+ if (desc->status & IRQ_INPROGRESS)
+ desc->handler->end(irq);
+
+ if (!(desc->status & IRQ_DISABLED))
+ desc->handler->disable(irq);
+ }
+
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(1, 0);
diff --git a/arch/powerpc/kernel/iomap.c b/arch/powerpc/kernel/iomap.c
index fd8214c..a13a93d 100644
--- a/arch/powerpc/kernel/iomap.c
+++ b/arch/powerpc/kernel/iomap.c
@@ -106,8 +106,6 @@
void __iomem *ioport_map(unsigned long port, unsigned int len)
{
- if (!_IO_IS_VALID(port))
- return NULL;
return (void __iomem *) (port+pci_io_base);
}
diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c
index ada50aa..6960f09 100644
--- a/arch/powerpc/kernel/nvram_64.c
+++ b/arch/powerpc/kernel/nvram_64.c
@@ -204,7 +204,7 @@
printk(KERN_WARNING "indx\t\tsig\tchks\tlen\tname\n");
list_for_each(p, &nvram_part->partition) {
tmp_part = list_entry(p, struct nvram_partition, partition);
- printk(KERN_WARNING "%d \t%02x\t%02x\t%d\t%s\n",
+ printk(KERN_WARNING "%4d \t%02x\t%02x\t%d\t%s\n",
tmp_part->index, tmp_part->header.signature,
tmp_part->header.checksum, tmp_part->header.length,
tmp_part->header.name);
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 4c4449b..e1b3b3e 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -42,14 +42,6 @@
unsigned long pci_probe_only = 1;
int pci_assign_all_buses = 0;
-/*
- * legal IO pages under MAX_ISA_PORT. This is to ensure we don't touch
- * devices we don't have access to.
- */
-unsigned long io_page_mask;
-
-EXPORT_SYMBOL(io_page_mask);
-
#ifdef CONFIG_PPC_MULTIPLATFORM
static void fixup_resource(struct resource *res, struct pci_dev *dev);
static void do_bus_setup(struct pci_bus *bus);
@@ -605,7 +597,7 @@
iSeries_pcibios_init();
#endif
- printk("PCI: Probing PCI hardware\n");
+ printk(KERN_DEBUG "PCI: Probing PCI hardware\n");
/* Scan all of the recorded PCI controllers. */
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
@@ -630,14 +622,14 @@
/* Cache the location of the ISA bridge (if we have one) */
ppc64_isabridge_dev = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL);
if (ppc64_isabridge_dev != NULL)
- printk("ISA bridge at %s\n", pci_name(ppc64_isabridge_dev));
+ printk(KERN_DEBUG "ISA bridge at %s\n", pci_name(ppc64_isabridge_dev));
#ifdef CONFIG_PPC_MULTIPLATFORM
/* map in PCI I/O space */
phbs_remap_io();
#endif
- printk("PCI: Probing PCI hardware done\n");
+ printk(KERN_DEBUG "PCI: Probing PCI hardware done\n");
return 0;
}
@@ -804,7 +796,7 @@
else
prot |= _PAGE_GUARDED;
- printk("PCI map for %s:%lx, prot: %lx\n", pci_name(dev), rp->start,
+ printk(KERN_DEBUG "PCI map for %s:%lx, prot: %lx\n", pci_name(dev), rp->start,
prot);
return __pgprot(prot);
@@ -1104,8 +1096,6 @@
pci_process_ISA_OF_ranges(isa_dn, hose->io_base_phys,
hose->io_base_virt);
of_node_put(isa_dn);
- /* Allow all IO */
- io_page_mask = -1;
}
}
@@ -1212,7 +1202,7 @@
return 1;
if (start_phys == 0)
return 1;
- printk("mapping IO %lx -> %lx, size: %lx\n", start_phys, start_virt, size);
+ printk(KERN_DEBUG "mapping IO %lx -> %lx, size: %lx\n", start_phys, start_virt, size);
if (__ioremap_explicit(start_phys, start_virt, size,
_PAGE_NO_CACHE | _PAGE_GUARDED))
return 1;
@@ -1232,27 +1222,13 @@
static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev)
{
struct pci_controller *hose = pci_bus_to_host(dev->bus);
- unsigned long start, end, mask, offset;
+ unsigned long offset;
if (res->flags & IORESOURCE_IO) {
offset = (unsigned long)hose->io_base_virt - pci_io_base;
- start = res->start += offset;
- end = res->end += offset;
-
- /* Need to allow IO access to pages that are in the
- ISA range */
- if (start < MAX_ISA_PORT) {
- if (end > MAX_ISA_PORT)
- end = MAX_ISA_PORT;
-
- start >>= PAGE_SHIFT;
- end >>= PAGE_SHIFT;
-
- /* get the range of pages for the map */
- mask = ((1 << (end+1)) - 1) ^ ((1 << start) - 1);
- io_page_mask |= mask;
- }
+ res->start += offset;
+ res->end += offset;
} else if (res->flags & IORESOURCE_MEM) {
res->start += hose->pci_mem_offset;
res->end += hose->pci_mem_offset;
diff --git a/arch/powerpc/kernel/pci_iommu.c b/arch/powerpc/kernel/pci_iommu.c
index c1d95e1..48aa82d 100644
--- a/arch/powerpc/kernel/pci_iommu.c
+++ b/arch/powerpc/kernel/pci_iommu.c
@@ -44,16 +44,16 @@
*/
#define PCI_GET_DN(dev) ((struct device_node *)((dev)->sysdata))
-static inline struct iommu_table *devnode_table(struct device *dev)
+static inline struct iommu_table *device_to_table(struct device *hwdev)
{
struct pci_dev *pdev;
- if (!dev) {
+ if (!hwdev) {
pdev = ppc64_isabridge_dev;
if (!pdev)
return NULL;
} else
- pdev = to_pci_dev(dev);
+ pdev = to_pci_dev(hwdev);
return PCI_DN(PCI_GET_DN(pdev))->iommu_table;
}
@@ -85,14 +85,14 @@
static void *pci_iommu_alloc_coherent(struct device *hwdev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
{
- return iommu_alloc_coherent(devnode_table(hwdev), size, dma_handle,
+ return iommu_alloc_coherent(device_to_table(hwdev), size, dma_handle,
device_to_mask(hwdev), flag);
}
static void pci_iommu_free_coherent(struct device *hwdev, size_t size,
void *vaddr, dma_addr_t dma_handle)
{
- iommu_free_coherent(devnode_table(hwdev), size, vaddr, dma_handle);
+ iommu_free_coherent(device_to_table(hwdev), size, vaddr, dma_handle);
}
/* Creates TCEs for a user provided buffer. The user buffer must be
@@ -104,7 +104,7 @@
static dma_addr_t pci_iommu_map_single(struct device *hwdev, void *vaddr,
size_t size, enum dma_data_direction direction)
{
- return iommu_map_single(devnode_table(hwdev), vaddr, size,
+ return iommu_map_single(device_to_table(hwdev), vaddr, size,
device_to_mask(hwdev), direction);
}
@@ -112,27 +112,27 @@
static void pci_iommu_unmap_single(struct device *hwdev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction direction)
{
- iommu_unmap_single(devnode_table(hwdev), dma_handle, size, direction);
+ iommu_unmap_single(device_to_table(hwdev), dma_handle, size, direction);
}
static int pci_iommu_map_sg(struct device *pdev, struct scatterlist *sglist,
int nelems, enum dma_data_direction direction)
{
- return iommu_map_sg(pdev, devnode_table(pdev), sglist,
+ return iommu_map_sg(pdev, device_to_table(pdev), sglist,
nelems, device_to_mask(pdev), direction);
}
static void pci_iommu_unmap_sg(struct device *pdev, struct scatterlist *sglist,
int nelems, enum dma_data_direction direction)
{
- iommu_unmap_sg(devnode_table(pdev), sglist, nelems, direction);
+ iommu_unmap_sg(device_to_table(pdev), sglist, nelems, direction);
}
/* We support DMA to/from any memory page via the iommu */
static int pci_iommu_dma_supported(struct device *dev, u64 mask)
{
- struct iommu_table *tbl = devnode_table(dev);
+ struct iommu_table *tbl = device_to_table(dev);
if (!tbl || tbl->it_offset > mask) {
printk(KERN_INFO "Warning: IOMMU table offset too big for device mask\n");
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 24e3ad7..528e7f8 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -76,7 +76,6 @@
/* keep track of when we need to update the rtc */
time_t last_rtc_update;
-extern int piranha_simulator;
#ifdef CONFIG_PPC_ISERIES
unsigned long iSeries_recal_titan = 0;
unsigned long iSeries_recal_tb = 0;
@@ -945,9 +944,9 @@
} else {
/* Normal PowerPC with timebase register */
ppc_md.calibrate_decr();
- printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
+ printk(KERN_DEBUG "time_init: decrementer frequency = %lu.%.6lu MHz\n",
ppc_tb_freq / 1000000, ppc_tb_freq % 1000000);
- printk(KERN_INFO "time_init: processor frequency = %lu.%.6lu MHz\n",
+ printk(KERN_DEBUG "time_init: processor frequency = %lu.%.6lu MHz\n",
ppc_proc_freq / 1000000, ppc_proc_freq % 1000000);
tb_last_stamp = tb_last_jiffy = get_tb();
}
@@ -1010,10 +1009,7 @@
tb_to_ns_scale = scale;
tb_to_ns_shift = shift;
-#ifdef CONFIG_PPC_ISERIES
- if (!piranha_simulator)
-#endif
- tm = get_boot_time();
+ tm = get_boot_time();
write_seqlock_irqsave(&xtime_lock, flags);
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index 971020c..ac5c7bf 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -13,27 +13,124 @@
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/types.h>
+#include <linux/device.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
+#include <linux/kobject.h>
+
#include <asm/iommu.h>
#include <asm/dma.h>
#include <asm/vio.h>
#include <asm/prom.h>
+#include <asm/firmware.h>
+#include <asm/tce.h>
+#include <asm/abs_addr.h>
+#include <asm/page.h>
+#include <asm/hvcall.h>
+#include <asm/iseries/vio.h>
+#include <asm/iseries/hv_types.h>
+#include <asm/iseries/hv_lp_config.h>
+#include <asm/iseries/hv_call_xm.h>
+#include <asm/iseries/iommu.h>
-static const struct vio_device_id *vio_match_device(
- const struct vio_device_id *, const struct vio_dev *);
+extern struct subsystem devices_subsys; /* needed for vio_find_name() */
-struct vio_dev vio_bus_device = { /* fake "parent" device */
+static struct vio_dev vio_bus_device = { /* fake "parent" device */
.name = vio_bus_device.dev.bus_id,
.type = "",
.dev.bus_id = "vio",
.dev.bus = &vio_bus_type,
};
-static struct vio_bus_ops vio_bus_ops;
+#ifdef CONFIG_PPC_ISERIES
+struct device *iSeries_vio_dev = &vio_bus_device.dev;
+EXPORT_SYMBOL(iSeries_vio_dev);
+
+static struct iommu_table veth_iommu_table;
+static struct iommu_table vio_iommu_table;
+
+static void __init iommu_vio_init(void)
+{
+ iommu_table_getparms_iSeries(255, 0, 0xff, &veth_iommu_table);
+ veth_iommu_table.it_size /= 2;
+ vio_iommu_table = veth_iommu_table;
+ vio_iommu_table.it_offset += veth_iommu_table.it_size;
+
+ if (!iommu_init_table(&veth_iommu_table))
+ printk("Virtual Bus VETH TCE table failed.\n");
+ if (!iommu_init_table(&vio_iommu_table))
+ printk("Virtual Bus VIO TCE table failed.\n");
+}
+#endif
+
+static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev)
+{
+#ifdef CONFIG_PPC_ISERIES
+ if (firmware_has_feature(FW_FEATURE_ISERIES)) {
+ if (strcmp(dev->type, "vlan") == 0)
+ return &veth_iommu_table;
+ return &vio_iommu_table;
+ } else
+#endif
+ {
+ unsigned int *dma_window;
+ struct iommu_table *newTceTable;
+ unsigned long offset;
+ int dma_window_property_size;
+
+ dma_window = (unsigned int *)get_property(
+ dev->dev.platform_data, "ibm,my-dma-window",
+ &dma_window_property_size);
+ if (!dma_window)
+ return NULL;
+
+ newTceTable = kmalloc(sizeof(struct iommu_table), GFP_KERNEL);
+
+ /*
+ * There should be some code to extract the phys-encoded
+ * offset using prom_n_addr_cells(). However, according to
+ * a comment on earlier versions, it's always zero, so we
+ * don't bother
+ */
+ offset = dma_window[1] >> PAGE_SHIFT;
+
+ /* TCE table size - measured in tce entries */
+ newTceTable->it_size = dma_window[4] >> PAGE_SHIFT;
+ /* offset for VIO should always be 0 */
+ newTceTable->it_offset = offset;
+ newTceTable->it_busno = 0;
+ newTceTable->it_index = (unsigned long)dma_window[0];
+ newTceTable->it_type = TCE_VB;
+
+ return iommu_init_table(newTceTable);
+ }
+}
+
+/**
+ * vio_match_device: - Tell if a VIO device has a matching
+ * VIO device id structure.
+ * @ids: array of VIO device id structures to search in
+ * @dev: the VIO device structure to match against
+ *
+ * Used by a driver to check whether a VIO device present in the
+ * system is in its list of supported devices. Returns the matching
+ * vio_device_id structure or NULL if there is no match.
+ */
+static const struct vio_device_id *vio_match_device(
+ const struct vio_device_id *ids, const struct vio_dev *dev)
+{
+ while (ids->type[0] != '\0') {
+ if ((strncmp(dev->type, ids->type, strlen(ids->type)) == 0) &&
+ device_is_compatible(dev->dev.platform_data, ids->compat))
+ return ids;
+ ids++;
+ }
+ return NULL;
+}
/*
* Convert from struct device to struct vio_dev and pass to driver.
@@ -106,35 +203,110 @@
}
EXPORT_SYMBOL(vio_unregister_driver);
-/**
- * vio_match_device: - Tell if a VIO device has a matching
- * VIO device id structure.
- * @ids: array of VIO device id structures to search in
- * @dev: the VIO device structure to match against
- *
- * Used by a driver to check whether a VIO device present in the
- * system is in its list of supported devices. Returns the matching
- * vio_device_id structure or NULL if there is no match.
- */
-static const struct vio_device_id *vio_match_device(
- const struct vio_device_id *ids, const struct vio_dev *dev)
+/* vio_dev refcount hit 0 */
+static void __devinit vio_dev_release(struct device *dev)
{
- while (ids->type[0] != '\0') {
- if (vio_bus_ops.match(ids, dev))
- return ids;
- ids++;
+ if (dev->platform_data) {
+ /* XXX free TCE table */
+ of_node_put(dev->platform_data);
}
- return NULL;
+ kfree(to_vio_dev(dev));
}
/**
+ * vio_register_device_node: - Register a new vio device.
+ * @of_node: The OF node for this device.
+ *
+ * Creates and initializes a vio_dev structure from the data in
+ * of_node (dev.platform_data) and adds it to the list of virtual devices.
+ * Returns a pointer to the created vio_dev or NULL if node has
+ * NULL device_type or compatible fields.
+ */
+struct vio_dev * __devinit vio_register_device_node(struct device_node *of_node)
+{
+ struct vio_dev *viodev;
+ unsigned int *unit_address;
+ unsigned int *irq_p;
+
+ /* we need the 'device_type' property, in order to match with drivers */
+ if (of_node->type == NULL) {
+ printk(KERN_WARNING "%s: node %s missing 'device_type'\n",
+ __FUNCTION__,
+ of_node->name ? of_node->name : "<unknown>");
+ return NULL;
+ }
+
+ unit_address = (unsigned int *)get_property(of_node, "reg", NULL);
+ if (unit_address == NULL) {
+ printk(KERN_WARNING "%s: node %s missing 'reg'\n",
+ __FUNCTION__,
+ of_node->name ? of_node->name : "<unknown>");
+ return NULL;
+ }
+
+ /* allocate a vio_dev for this node */
+ viodev = kzalloc(sizeof(struct vio_dev), GFP_KERNEL);
+ if (viodev == NULL)
+ return NULL;
+
+ viodev->dev.platform_data = of_node_get(of_node);
+
+ viodev->irq = NO_IRQ;
+ irq_p = (unsigned int *)get_property(of_node, "interrupts", NULL);
+ if (irq_p) {
+ int virq = virt_irq_create_mapping(*irq_p);
+ if (virq == NO_IRQ) {
+ printk(KERN_ERR "Unable to allocate interrupt "
+ "number for %s\n", of_node->full_name);
+ } else
+ viodev->irq = irq_offset_up(virq);
+ }
+
+ snprintf(viodev->dev.bus_id, BUS_ID_SIZE, "%x", *unit_address);
+ viodev->name = of_node->name;
+ viodev->type = of_node->type;
+ viodev->unit_address = *unit_address;
+ if (firmware_has_feature(FW_FEATURE_ISERIES)) {
+ unit_address = (unsigned int *)get_property(of_node,
+ "linux,unit_address", NULL);
+ if (unit_address != NULL)
+ viodev->unit_address = *unit_address;
+ }
+ viodev->iommu_table = vio_build_iommu_table(viodev);
+
+ /* init generic 'struct device' fields: */
+ viodev->dev.parent = &vio_bus_device.dev;
+ viodev->dev.bus = &vio_bus_type;
+ viodev->dev.release = vio_dev_release;
+
+ /* register with generic device framework */
+ if (device_register(&viodev->dev)) {
+ printk(KERN_ERR "%s: failed to register device %s\n",
+ __FUNCTION__, viodev->dev.bus_id);
+ /* XXX free TCE table */
+ kfree(viodev);
+ return NULL;
+ }
+
+ return viodev;
+}
+EXPORT_SYMBOL(vio_register_device_node);
+
+/**
* vio_bus_init: - Initialize the virtual IO bus
*/
-int __init vio_bus_init(struct vio_bus_ops *ops)
+static int __init vio_bus_init(void)
{
int err;
+ struct device_node *node_vroot;
- vio_bus_ops = *ops;
+#ifdef CONFIG_PPC_ISERIES
+ if (firmware_has_feature(FW_FEATURE_ISERIES)) {
+ iommu_vio_init();
+ vio_bus_device.iommu_table = &vio_iommu_table;
+ iSeries_vio_dev = &vio_bus_device.dev;
+ }
+#endif
err = bus_register(&vio_bus_type);
if (err) {
@@ -153,47 +325,48 @@
return err;
}
+ node_vroot = find_devices("vdevice");
+ if (node_vroot) {
+ struct device_node *of_node;
+
+ /*
+ * Create struct vio_devices for each virtual device in
+ * the device tree. Drivers will associate with them later.
+ */
+ for (of_node = node_vroot->child; of_node != NULL;
+ of_node = of_node->sibling) {
+ printk(KERN_DEBUG "%s: processing %p\n",
+ __FUNCTION__, of_node);
+ vio_register_device_node(of_node);
+ }
+ }
+
return 0;
}
+__initcall(vio_bus_init);
-/* vio_dev refcount hit 0 */
-static void __devinit vio_dev_release(struct device *dev)
-{
- if (vio_bus_ops.release_device)
- vio_bus_ops.release_device(dev);
- kfree(to_vio_dev(dev));
-}
-
-static ssize_t viodev_show_name(struct device *dev,
+static ssize_t name_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%s\n", to_vio_dev(dev)->name);
}
-DEVICE_ATTR(name, S_IRUSR | S_IRGRP | S_IROTH, viodev_show_name, NULL);
-struct vio_dev * __devinit vio_register_device(struct vio_dev *viodev)
+static ssize_t devspec_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- /* init generic 'struct device' fields: */
- viodev->dev.parent = &vio_bus_device.dev;
- viodev->dev.bus = &vio_bus_type;
- viodev->dev.release = vio_dev_release;
+ struct device_node *of_node = dev->platform_data;
- /* register with generic device framework */
- if (device_register(&viodev->dev)) {
- printk(KERN_ERR "%s: failed to register device %s\n",
- __FUNCTION__, viodev->dev.bus_id);
- return NULL;
- }
- device_create_file(&viodev->dev, &dev_attr_name);
-
- return viodev;
+ return sprintf(buf, "%s\n", of_node ? of_node->full_name : "none");
}
+static struct device_attribute vio_dev_attrs[] = {
+ __ATTR_RO(name),
+ __ATTR_RO(devspec),
+ __ATTR_NULL
+};
+
void __devinit vio_unregister_device(struct vio_dev *viodev)
{
- if (vio_bus_ops.unregister_device)
- vio_bus_ops.unregister_device(viodev);
- device_remove_file(&viodev->dev, &dev_attr_name);
device_unregister(&viodev->dev);
}
EXPORT_SYMBOL(vio_unregister_device);
@@ -267,22 +440,23 @@
char *buffer, int buffer_size)
{
const struct vio_dev *vio_dev = to_vio_dev(dev);
+ struct device_node *dn = dev->platform_data;
char *cp;
int length;
if (!num_envp)
return -ENOMEM;
- if (!vio_dev->dev.platform_data)
+ if (!dn)
return -ENODEV;
- cp = (char *)get_property(vio_dev->dev.platform_data, "compatible", &length);
+ cp = (char *)get_property(dn, "compatible", &length);
if (!cp)
return -ENODEV;
envp[0] = buffer;
length = scnprintf(buffer, buffer_size, "MODALIAS=vio:T%sS%s",
vio_dev->type, cp);
- if (buffer_size - length <= 0)
+ if ((buffer_size - length) <= 0)
return -ENOMEM;
envp[1] = NULL;
return 0;
@@ -290,9 +464,81 @@
struct bus_type vio_bus_type = {
.name = "vio",
+ .dev_attrs = vio_dev_attrs,
.uevent = vio_hotplug,
.match = vio_bus_match,
.probe = vio_bus_probe,
.remove = vio_bus_remove,
.shutdown = vio_bus_shutdown,
};
+
+/**
+ * vio_get_attribute: - get attribute for virtual device
+ * @vdev: The vio device to get property.
+ * @which: The property/attribute to be extracted.
+ * @length: Pointer to length of returned data size (unused if NULL).
+ *
+ * Calls prom.c's get_property() to return the value of the
+ * attribute specified by @which
+*/
+const void *vio_get_attribute(struct vio_dev *vdev, char *which, int *length)
+{
+ return get_property(vdev->dev.platform_data, which, length);
+}
+EXPORT_SYMBOL(vio_get_attribute);
+
+#ifdef CONFIG_PPC_PSERIES
+/* vio_find_name() - internal because only vio.c knows how we formatted the
+ * kobject name
+ * XXX once vio_bus_type.devices is actually used as a kset in
+ * drivers/base/bus.c, this function should be removed in favor of
+ * "device_find(kobj_name, &vio_bus_type)"
+ */
+static struct vio_dev *vio_find_name(const char *kobj_name)
+{
+ struct kobject *found;
+
+ found = kset_find_obj(&devices_subsys.kset, kobj_name);
+ if (!found)
+ return NULL;
+
+ return to_vio_dev(container_of(found, struct device, kobj));
+}
+
+/**
+ * vio_find_node - find an already-registered vio_dev
+ * @vnode: device_node of the virtual device we're looking for
+ */
+struct vio_dev *vio_find_node(struct device_node *vnode)
+{
+ uint32_t *unit_address;
+ char kobj_name[BUS_ID_SIZE];
+
+ /* construct the kobject name from the device node */
+ unit_address = (uint32_t *)get_property(vnode, "reg", NULL);
+ if (!unit_address)
+ return NULL;
+ snprintf(kobj_name, BUS_ID_SIZE, "%x", *unit_address);
+
+ return vio_find_name(kobj_name);
+}
+EXPORT_SYMBOL(vio_find_node);
+
+int vio_enable_interrupts(struct vio_dev *dev)
+{
+ int rc = h_vio_signal(dev->unit_address, VIO_IRQ_ENABLE);
+ if (rc != H_SUCCESS)
+ printk(KERN_ERR "vio: Error 0x%x enabling interrupts\n", rc);
+ return rc;
+}
+EXPORT_SYMBOL(vio_enable_interrupts);
+
+int vio_disable_interrupts(struct vio_dev *dev)
+{
+ int rc = h_vio_signal(dev->unit_address, VIO_IRQ_DISABLE);
+ if (rc != H_SUCCESS)
+ printk(KERN_ERR "vio: Error 0x%x disabling interrupts\n", rc);
+ return rc;
+}
+EXPORT_SYMBOL(vio_disable_interrupts);
+#endif /* CONFIG_PPC_PSERIES */
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index c006d90..b43ed92 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -319,7 +319,7 @@
mmu_virtual_psize = MMU_PAGE_64K;
#endif
- printk(KERN_INFO "Page orders: linear mapping = %d, others = %d\n",
+ printk(KERN_DEBUG "Page orders: linear mapping = %d, others = %d\n",
mmu_psize_defs[mmu_linear_psize].shift,
mmu_psize_defs[mmu_virtual_psize].shift);
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 741dd88..69f3b9a 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -299,9 +299,9 @@
kmap_prot = PAGE_KERNEL;
#endif /* CONFIG_HIGHMEM */
- printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
+ printk(KERN_DEBUG "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
top_of_ram, total_ram);
- printk(KERN_INFO "Memory hole size: %ldMB\n",
+ printk(KERN_DEBUG "Memory hole size: %ldMB\n",
(top_of_ram - total_ram) >> 20);
/*
* All pages are DMA-able so we put them all in the DMA zone.
@@ -380,7 +380,7 @@
totalhigh_pages++;
}
totalram_pages += totalhigh_pages;
- printk(KERN_INFO "High memory: %luk\n",
+ printk(KERN_DEBUG "High memory: %luk\n",
totalhigh_pages << (PAGE_SHIFT-10));
}
#endif /* CONFIG_HIGHMEM */
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 092355f..aa98cb3 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -487,9 +487,9 @@
unsigned long total_ram = lmb_phys_mem_size();
unsigned int i;
- printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
+ printk(KERN_DEBUG "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
top_of_ram, total_ram);
- printk(KERN_INFO "Memory hole size: %ldMB\n",
+ printk(KERN_DEBUG "Memory hole size: %ldMB\n",
(top_of_ram - total_ram) >> 20);
for (i = 0; i < lmb.memory.cnt; ++i)
@@ -507,7 +507,7 @@
return;
for_each_online_node(node) {
- printk(KERN_INFO "Node %d CPUs:", node);
+ printk(KERN_DEBUG "Node %d CPUs:", node);
count = 0;
/*
@@ -543,7 +543,7 @@
for_each_online_node(node) {
unsigned long i;
- printk(KERN_INFO "Node %d Memory:", node);
+ printk(KERN_DEBUG "Node %d Memory:", node);
count = 0;
diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c
index 5b1de7e..38a2f9c 100644
--- a/arch/powerpc/oprofile/common.c
+++ b/arch/powerpc/oprofile/common.c
@@ -162,7 +162,7 @@
ops->stop = op_powerpc_stop;
ops->backtrace = op_powerpc_backtrace;
- printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
+ printk(KERN_DEBUG "oprofile: using %s performance monitoring.\n",
ops->cpu_type);
return 0;
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 06e3712..454fc53 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -11,13 +11,20 @@
help
This option enables support for the MPC 8540 ADS board
+config MPC85xx_CDS
+ bool "Freescale MPC85xx CDS"
+ select DEFAULT_UIMAGE
+ select PPC_I8259 if PCI
+ help
+ This option enables support for the MPC85xx CDS board
+
endchoice
config MPC8540
bool
select PPC_UDBG_16550
select PPC_INDIRECT_PCI
- default y if MPC8540_ADS
+ default y if MPC8540_ADS || MPC85xx_CDS
config PPC_INDIRECT_PCI_BE
bool
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index ffc4139..7615aa5 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -3,3 +3,4 @@
#
obj-$(CONFIG_PPC_85xx) += misc.o pci.o
obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
+obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
new file mode 100644
index 0000000..18e6e11
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -0,0 +1,359 @@
+/*
+ * MPC85xx setup and early boot code plus other random bits.
+ *
+ * Maintained by Kumar Gala (see MAINTAINERS for contact information)
+ *
+ * Copyright 2005 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/module.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/bootinfo.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc85xx.h>
+#include <asm/irq.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <asm/i8259.h>
+
+#include <sysdev/fsl_soc.h>
+#include "mpc85xx.h"
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+#endif
+
+static int cds_pci_slot = 2;
+static volatile u8 *cadmus;
+
+/*
+ * Internal interrupts are all Level Sensitive, and Positive Polarity
+ *
+ * Note: Likely, this table and the following function should be
+ * obtained and derived from the OF Device Tree.
+ */
+static u_char mpc85xx_cds_openpic_initsenses[] __initdata = {
+ MPC85XX_INTERNAL_IRQ_SENSES,
+#if defined(CONFIG_PCI)
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Ext 0: PCI slot 0 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 3 */
+#else
+ 0x0, /* External 0: */
+ 0x0, /* External 1: */
+ 0x0, /* External 2: */
+ 0x0, /* External 3: */
+#endif
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */
+ 0x0, /* External 6: */
+ 0x0, /* External 7: */
+ 0x0, /* External 8: */
+ 0x0, /* External 9: */
+ 0x0, /* External 10: */
+#ifdef CONFIG_PCI
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 11: PCI2 slot 0 */
+#else
+ 0x0, /* External 11: */
+#endif
+};
+
+
+#ifdef CONFIG_PCI
+/*
+ * interrupt routing
+ */
+int
+mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
+
+ if (!hose->index)
+ {
+ /* Handle PCI1 interrupts */
+ char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+
+ /* Note IRQ assignment for slots is based on which slot the elysium is
+ * in -- in this setup elysium is in slot #2 (this PIRQA as first
+ * interrupt on slot */
+ {
+ { 0, 1, 2, 3 }, /* 16 - PMC */
+ { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */
+ { 0, 1, 2, 3 }, /* 18 - Slot 1 */
+ { 1, 2, 3, 0 }, /* 19 - Slot 2 */
+ { 2, 3, 0, 1 }, /* 20 - Slot 3 */
+ { 3, 0, 1, 2 }, /* 21 - Slot 4 */
+ };
+
+ const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4;
+ int i, j;
+
+ for (i = 0; i < 6; i++)
+ for (j = 0; j < 4; j++)
+ pci_irq_table[i][j] =
+ ((pci_irq_table[i][j] + 5 -
+ cds_pci_slot) & 0x3) + PIRQ0A;
+
+ return PCI_IRQ_TABLE_LOOKUP;
+ } else {
+ /* Handle PCI2 interrupts (if we have one) */
+ char pci_irq_table[][4] =
+ {
+ /*
+ * We only have one slot and one interrupt
+ * going to PIRQA - PIRQD */
+ { PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */
+ };
+
+ const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4;
+
+ return PCI_IRQ_TABLE_LOOKUP;
+ }
+}
+
+#define ARCADIA_HOST_BRIDGE_IDSEL 17
+#define ARCADIA_2ND_BRIDGE_IDSEL 3
+
+extern int mpc85xx_pci2_busno;
+
+int
+mpc85xx_exclude_device(u_char bus, u_char devfn)
+{
+ if (bus == 0 && PCI_SLOT(devfn) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (mpc85xx_pci2_busno)
+ if (bus == (mpc85xx_pci2_busno) && PCI_SLOT(devfn) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /* We explicitly do not go past the Tundra 320 Bridge */
+ if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ else
+ return PCIBIOS_SUCCESSFUL;
+}
+
+void __init
+mpc85xx_cds_pcibios_fixup(void)
+{
+ struct pci_dev *dev;
+ u_char c;
+
+ if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_82C586_1, NULL))) {
+ /*
+ * U-Boot does not set the enable bits
+ * for the IDE device. Force them on here.
+ */
+ pci_read_config_byte(dev, 0x40, &c);
+ c |= 0x03; /* IDE: Chip Enable Bits */
+ pci_write_config_byte(dev, 0x40, c);
+
+ /*
+ * Since only primary interface works, force the
+ * IDE function to standard primary IDE interrupt
+ * w/ 8259 offset
+ */
+ dev->irq = 14;
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ pci_dev_put(dev);
+ }
+
+ /*
+ * Force legacy USB interrupt routing
+ */
+ if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_82C586_2, NULL))) {
+ dev->irq = 10;
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10);
+ pci_dev_put(dev);
+ }
+
+ if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_82C586_2, dev))) {
+ dev->irq = 11;
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
+ pci_dev_put(dev);
+ }
+}
+#endif /* CONFIG_PCI */
+
+void __init mpc85xx_cds_pic_init(void)
+{
+ struct mpic *mpic1;
+ phys_addr_t OpenPIC_PAddr;
+
+ /* Determine the Physical Address of the OpenPIC regs */
+ OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET;
+
+ mpic1 = mpic_alloc(OpenPIC_PAddr,
+ MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250,
+ mpc85xx_cds_openpic_initsenses,
+ sizeof(mpc85xx_cds_openpic_initsenses), " OpenPIC ");
+ BUG_ON(mpic1 == NULL);
+ mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200);
+ mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280);
+ mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300);
+ mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380);
+ mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400);
+ mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480);
+ mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500);
+ mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580);
+
+ /* dummy mappings to get to 48 */
+ mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600);
+ mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680);
+ mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700);
+ mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780);
+
+ /* External ints */
+ mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000);
+ mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080);
+ mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100);
+
+ mpic_init(mpic1);
+
+#ifdef CONFIG_PCI
+ mpic_setup_cascade(PIRQ0A, i8259_irq_cascade, NULL);
+
+ i8259_init(0,0);
+#endif
+}
+
+
+/*
+ * Setup the architecture
+ */
+static void __init
+mpc85xx_cds_setup_arch(void)
+{
+ struct device_node *cpu;
+#ifdef CONFIG_PCI
+ struct device_node *np;
+#endif
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc85xx_cds_setup_arch()", 0);
+
+ cpu = of_find_node_by_type(NULL, "cpu");
+ if (cpu != 0) {
+ unsigned int *fp;
+
+ fp = (int *)get_property(cpu, "clock-frequency", NULL);
+ if (fp != 0)
+ loops_per_jiffy = *fp / HZ;
+ else
+ loops_per_jiffy = 500000000 / HZ;
+ of_node_put(cpu);
+ }
+
+ cadmus = ioremap(CADMUS_BASE, CADMUS_SIZE);
+ cds_pci_slot = ((cadmus[CM_CSR] >> 6) & 0x3) + 1;
+
+ if (ppc_md.progress) {
+ char buf[40];
+ snprintf(buf, 40, "CDS Version = 0x%x in slot %d\n",
+ cadmus[CM_VER], cds_pci_slot);
+ ppc_md.progress(buf, 0);
+ }
+
+#ifdef CONFIG_PCI
+ for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+ add_bridge(np);
+
+ ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup;
+ ppc_md.pci_swizzle = common_swizzle;
+ ppc_md.pci_map_irq = mpc85xx_map_irq;
+ ppc_md.pci_exclude_device = mpc85xx_exclude_device;
+#endif
+
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+}
+
+
+void
+mpc85xx_cds_show_cpuinfo(struct seq_file *m)
+{
+ uint pvid, svid, phid1;
+ uint memsize = total_memory;
+
+ pvid = mfspr(SPRN_PVR);
+ svid = mfspr(SPRN_SVR);
+
+ seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
+ seq_printf(m, "Machine\t\t: MPC85xx CDS (0x%x)\n", cadmus[CM_VER]);
+ seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+ /* Display cpu Pll setting */
+ phid1 = mfspr(SPRN_HID1);
+ seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+
+ /* Display the amount of memory */
+ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+}
+
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mpc85xx_cds_probe(void)
+{
+ /* We always match for now, eventually we should look at
+ * the flat dev tree to ensure this is the board we are
+ * supposed to run on
+ */
+ return 1;
+}
+
+define_machine(mpc85xx_cds) {
+ .name = "MPC85xx CDS",
+ .probe = mpc85xx_cds_probe,
+ .setup_arch = mpc85xx_cds_setup_arch,
+ .init_IRQ = mpc85xx_cds_pic_init,
+ .show_cpuinfo = mpc85xx_cds_show_cpuinfo,
+ .get_irq = mpic_get_irq,
+ .restart = mpc85xx_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.h b/arch/powerpc/platforms/85xx/mpc85xx_cds.h
new file mode 100644
index 0000000..671f54f
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.h
@@ -0,0 +1,43 @@
+/*
+ * arch/ppc/platforms/85xx/mpc85xx_cds_common.h
+ *
+ * MPC85xx CDS board definitions
+ *
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_MPC85XX_CDS_H__
+#define __MACH_MPC85XX_CDS_H__
+
+/* CADMUS info */
+#define CADMUS_BASE (0xf8004000)
+#define CADMUS_SIZE (256)
+#define CM_VER (0)
+#define CM_CSR (1)
+#define CM_RST (2)
+
+/* CDS NVRAM/RTC */
+#define CDS_RTC_ADDR (0xf8000000)
+#define CDS_RTC_SIZE (8 * 1024)
+
+/* PCI interrupt controller */
+#define PIRQ0A MPC85xx_IRQ_EXT0
+#define PIRQ0B MPC85xx_IRQ_EXT1
+#define PIRQ0C MPC85xx_IRQ_EXT2
+#define PIRQ0D MPC85xx_IRQ_EXT3
+#define PIRQ1A MPC85xx_IRQ_EXT11
+
+#define NR_8259_INTS 16
+#define CPM_IRQ_OFFSET NR_8259_INTS
+
+#define MPC85xx_OPENPIC_IRQ_OFFSET 80
+
+#endif /* __MACH_MPC85XX_CDS_H__ */
diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c
index 8bb33ab..36439c5 100644
--- a/arch/powerpc/platforms/cell/spufs/context.c
+++ b/arch/powerpc/platforms/cell/spufs/context.c
@@ -30,7 +30,7 @@
struct spu_context *alloc_spu_context(void)
{
struct spu_context *ctx;
- ctx = kmalloc(sizeof *ctx, GFP_KERNEL);
+ ctx = kzalloc(sizeof *ctx, GFP_KERNEL);
if (!ctx)
goto out;
/* Binding to physical processor deferred
@@ -48,17 +48,7 @@
init_waitqueue_head(&ctx->wbox_wq);
init_waitqueue_head(&ctx->stop_wq);
init_waitqueue_head(&ctx->mfc_wq);
- ctx->ibox_fasync = NULL;
- ctx->wbox_fasync = NULL;
- ctx->mfc_fasync = NULL;
- ctx->mfc = NULL;
- ctx->tagwait = 0;
ctx->state = SPU_STATE_SAVED;
- ctx->local_store = NULL;
- ctx->cntl = NULL;
- ctx->signal1 = NULL;
- ctx->signal2 = NULL;
- ctx->spu = NULL;
ctx->ops = &spu_backing_ops;
ctx->owner = get_task_mm(current);
goto out;
diff --git a/arch/powerpc/platforms/iseries/Makefile b/arch/powerpc/platforms/iseries/Makefile
index ce8c0b9..7e67a20 100644
--- a/arch/powerpc/platforms/iseries/Makefile
+++ b/arch/powerpc/platforms/iseries/Makefile
@@ -3,7 +3,6 @@
obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o mf.o lpevents.o \
hvcall.o proc.o htab.o iommu.o misc.o irq.o
obj-$(CONFIG_PCI) += pci.o vpdinfo.o
-obj-$(CONFIG_IBMVIO) += vio.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_VIOPATH) += viopath.o
obj-$(CONFIG_MODULES) += ksyms.o
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index bea0b70..3ac2206 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -4,6 +4,7 @@
* Rewrite, cleanup:
*
* Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
+ * Copyright (C) 2006 Olof Johansson <olof@lixom.net>
*
* Dynamic DMA mapping support, iSeries-specific parts.
*
@@ -33,8 +34,7 @@
#include <asm/abs_addr.h>
#include <asm/pci-bridge.h>
#include <asm/iseries/hv_call_xm.h>
-
-#include "iommu.h"
+#include <asm/iseries/iommu.h>
extern struct list_head iSeries_Global_Device_List;
@@ -43,30 +43,28 @@
unsigned long uaddr, enum dma_data_direction direction)
{
u64 rc;
- union tce_entry tce;
+ u64 tce, rpn;
index <<= TCE_PAGE_FACTOR;
npages <<= TCE_PAGE_FACTOR;
while (npages--) {
- tce.te_word = 0;
- tce.te_bits.tb_rpn = virt_to_abs(uaddr) >> TCE_SHIFT;
+ rpn = virt_to_abs(uaddr) >> TCE_SHIFT;
+ tce = (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
if (tbl->it_type == TCE_VB) {
/* Virtual Bus */
- tce.te_bits.tb_valid = 1;
- tce.te_bits.tb_allio = 1;
+ tce |= TCE_VALID|TCE_ALLIO;
if (direction != DMA_TO_DEVICE)
- tce.te_bits.tb_rdwr = 1;
+ tce |= TCE_VB_WRITE;
} else {
/* PCI Bus */
- tce.te_bits.tb_rdwr = 1; /* Read allowed */
+ tce |= TCE_PCI_READ; /* Read allowed */
if (direction != DMA_TO_DEVICE)
- tce.te_bits.tb_pciwr = 1;
+ tce |= TCE_PCI_WRITE;
}
- rc = HvCallXm_setTce((u64)tbl->it_index, (u64)index,
- tce.te_word);
+ rc = HvCallXm_setTce((u64)tbl->it_index, (u64)index, tce);
if (rc)
panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%lx\n",
rc);
@@ -124,7 +122,7 @@
/* itc_size is in pages worth of table, it_size is in # of entries */
tbl->it_size = ((parms->itc_size * TCE_PAGE_SIZE) /
- sizeof(union tce_entry)) >> TCE_PAGE_FACTOR;
+ TCE_ENTRY_SIZE) >> TCE_PAGE_FACTOR;
tbl->it_busno = parms->itc_busno;
tbl->it_offset = parms->itc_offset >> TCE_PAGE_FACTOR;
tbl->it_index = parms->itc_index;
diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c
index d771b8e..1a2c2a5 100644
--- a/arch/powerpc/platforms/iseries/mf.c
+++ b/arch/powerpc/platforms/iseries/mf.c
@@ -45,7 +45,6 @@
#include "setup.h"
-extern int piranha_simulator;
static int mf_initialized;
/*
@@ -658,7 +657,7 @@
void __init mf_display_progress(u16 value)
{
- if (piranha_simulator || !mf_initialized)
+ if (!mf_initialized)
return;
if (0xFFFF == value)
@@ -1295,9 +1294,6 @@
*/
void iSeries_get_rtc_time(struct rtc_time *rtc_tm)
{
- if (piranha_simulator)
- return;
-
mf_get_rtc(rtc_tm);
rtc_tm->tm_mon--;
}
@@ -1316,9 +1312,6 @@
{
struct rtc_time tm;
- if (piranha_simulator)
- return 0;
-
mf_get_boot_rtc(&tm);
return mktime(tm.tm_year + 1900, tm.tm_mon, tm.tm_mday,
tm.tm_hour, tm.tm_min, tm.tm_sec);
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index a19833b..428ffb5 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -37,15 +37,13 @@
#include <asm/iseries/hv_call_xm.h>
#include <asm/iseries/mf.h>
+#include <asm/iseries/iommu.h>
#include <asm/ppc-pci.h>
#include "irq.h"
#include "pci.h"
#include "call_pci.h"
-#include "iommu.h"
-
-extern unsigned long io_page_mask;
/*
* Forward declares of prototypes.
@@ -277,7 +275,6 @@
{
iomm_table_initialize();
find_and_init_phbs();
- io_page_mask = -1;
}
/*
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index a6fd9be..befd36a 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -28,6 +28,7 @@
#include <linux/major.h>
#include <linux/root_dev.h>
#include <linux/kernel.h>
+#include <linux/if_ether.h> /* ETH_ALEN */
#include <asm/processor.h>
#include <asm/machdep.h>
@@ -45,6 +46,7 @@
#include <asm/cache.h>
#include <asm/sections.h>
#include <asm/abs_addr.h>
+#include <asm/iseries/hv_types.h>
#include <asm/iseries/hv_lp_config.h>
#include <asm/iseries/hv_call_event.h>
#include <asm/iseries/hv_call_xm.h>
@@ -81,9 +83,6 @@
static void iSeries_pci_final_fixup(void) { }
#endif
-/* Global Variables */
-int piranha_simulator;
-
extern int rd_size; /* Defined in drivers/block/rd.c */
extern unsigned long embedded_sysmap_start;
extern unsigned long embedded_sysmap_end;
@@ -340,8 +339,6 @@
#ifdef CONFIG_SMP
smp_init_iSeries();
#endif
- if (itLpNaca.xPirEnvironMode == 0)
- piranha_simulator = 1;
/* Associate Lp Event Queue 0 with processor 0 */
HvCallEvent_setLpEventQueueInterruptProc(0, 0);
@@ -536,10 +533,10 @@
{
if (get_lppaca()->shared_proc) {
ppc_md.idle_loop = iseries_shared_idle;
- printk(KERN_INFO "Using shared processor idle loop\n");
+ printk(KERN_DEBUG "Using shared processor idle loop\n");
} else {
ppc_md.idle_loop = iseries_dedicated_idle;
- printk(KERN_INFO "Using dedicated idle loop\n");
+ printk(KERN_DEBUG "Using dedicated idle loop\n");
}
/* Setup the Lp Event Queue */
@@ -715,7 +712,7 @@
};
struct blob {
- unsigned char data[PAGE_SIZE];
+ unsigned char data[PAGE_SIZE * 2];
unsigned long next;
};
@@ -916,6 +913,92 @@
dt_prop_str(dt, "compatible", "IBM,iSeries");
}
+void dt_vdevices(struct iseries_flat_dt *dt)
+{
+ u32 reg = 0;
+ HvLpIndexMap vlan_map;
+ int i;
+ char buf[32];
+
+ dt_start_node(dt, "vdevice");
+ dt_prop_u32(dt, "#address-cells", 1);
+ dt_prop_u32(dt, "#size-cells", 0);
+
+ snprintf(buf, sizeof(buf), "viocons@%08x", reg);
+ dt_start_node(dt, buf);
+ dt_prop_str(dt, "device_type", "serial");
+ dt_prop_str(dt, "compatible", "");
+ dt_prop_u32(dt, "reg", reg);
+ dt_end_node(dt);
+ reg++;
+
+ snprintf(buf, sizeof(buf), "v-scsi@%08x", reg);
+ dt_start_node(dt, buf);
+ dt_prop_str(dt, "device_type", "vscsi");
+ dt_prop_str(dt, "compatible", "IBM,v-scsi");
+ dt_prop_u32(dt, "reg", reg);
+ dt_end_node(dt);
+ reg++;
+
+ vlan_map = HvLpConfig_getVirtualLanIndexMap();
+ for (i = 0; i < HVMAXARCHITECTEDVIRTUALLANS; i++) {
+ unsigned char mac_addr[ETH_ALEN];
+
+ if ((vlan_map & (0x8000 >> i)) == 0)
+ continue;
+ snprintf(buf, 32, "vlan@%08x", reg + i);
+ dt_start_node(dt, buf);
+ dt_prop_str(dt, "device_type", "vlan");
+ dt_prop_str(dt, "compatible", "");
+ dt_prop_u32(dt, "reg", reg + i);
+ dt_prop_u32(dt, "linux,unit_address", i);
+
+ mac_addr[0] = 0x02;
+ mac_addr[1] = 0x01;
+ mac_addr[2] = 0xff;
+ mac_addr[3] = i;
+ mac_addr[4] = 0xff;
+ mac_addr[5] = HvLpConfig_getLpIndex_outline();
+ dt_prop(dt, "local-mac-address", (char *)mac_addr, ETH_ALEN);
+ dt_prop(dt, "mac-address", (char *)mac_addr, ETH_ALEN);
+
+ dt_end_node(dt);
+ }
+ reg += HVMAXARCHITECTEDVIRTUALLANS;
+
+ for (i = 0; i < HVMAXARCHITECTEDVIRTUALDISKS; i++) {
+ snprintf(buf, 32, "viodasd@%08x", reg + i);
+ dt_start_node(dt, buf);
+ dt_prop_str(dt, "device_type", "viodasd");
+ dt_prop_str(dt, "compatible", "");
+ dt_prop_u32(dt, "reg", reg + i);
+ dt_prop_u32(dt, "linux,unit_address", i);
+ dt_end_node(dt);
+ }
+ reg += HVMAXARCHITECTEDVIRTUALDISKS;
+ for (i = 0; i < HVMAXARCHITECTEDVIRTUALCDROMS; i++) {
+ snprintf(buf, 32, "viocd@%08x", reg + i);
+ dt_start_node(dt, buf);
+ dt_prop_str(dt, "device_type", "viocd");
+ dt_prop_str(dt, "compatible", "");
+ dt_prop_u32(dt, "reg", reg + i);
+ dt_prop_u32(dt, "linux,unit_address", i);
+ dt_end_node(dt);
+ }
+ reg += HVMAXARCHITECTEDVIRTUALCDROMS;
+ for (i = 0; i < HVMAXARCHITECTEDVIRTUALTAPES; i++) {
+ snprintf(buf, 32, "viotape@%08x", reg + i);
+ dt_start_node(dt, buf);
+ dt_prop_str(dt, "device_type", "viotape");
+ dt_prop_str(dt, "compatible", "");
+ dt_prop_u32(dt, "reg", reg + i);
+ dt_prop_u32(dt, "linux,unit_address", i);
+ dt_end_node(dt);
+ }
+
+ dt_end_node(dt);
+}
+
void build_flat_dt(struct iseries_flat_dt *dt, unsigned long phys_mem_size)
{
u64 tmp[2];
@@ -946,6 +1029,8 @@
dt_cpus(dt);
+ dt_vdevices(dt);
+
dt_end_node(dt);
dt_push_u32(dt, OF_DT_END);
diff --git a/arch/powerpc/platforms/iseries/vio.c b/arch/powerpc/platforms/iseries/vio.c
deleted file mode 100644
index ad36ab0..0000000
--- a/arch/powerpc/platforms/iseries/vio.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * IBM PowerPC iSeries Virtual I/O Infrastructure Support.
- *
- * Copyright (c) 2005 Stephen Rothwell, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/init.h>
-
-#include <asm/vio.h>
-#include <asm/iommu.h>
-#include <asm/tce.h>
-#include <asm/abs_addr.h>
-#include <asm/page.h>
-#include <asm/iseries/vio.h>
-#include <asm/iseries/hv_types.h>
-#include <asm/iseries/hv_lp_config.h>
-#include <asm/iseries/hv_call_xm.h>
-
-#include "iommu.h"
-
-struct device *iSeries_vio_dev = &vio_bus_device.dev;
-EXPORT_SYMBOL(iSeries_vio_dev);
-
-static struct iommu_table veth_iommu_table;
-static struct iommu_table vio_iommu_table;
-
-static void __init iommu_vio_init(void)
-{
- iommu_table_getparms_iSeries(255, 0, 0xff, &veth_iommu_table);
- veth_iommu_table.it_size /= 2;
- vio_iommu_table = veth_iommu_table;
- vio_iommu_table.it_offset += veth_iommu_table.it_size;
-
- if (!iommu_init_table(&veth_iommu_table))
- printk("Virtual Bus VETH TCE table failed.\n");
- if (!iommu_init_table(&vio_iommu_table))
- printk("Virtual Bus VIO TCE table failed.\n");
-}
-
-/**
- * vio_register_device_iseries: - Register a new iSeries vio device.
- * @voidev: The device to register.
- */
-static struct vio_dev *__init vio_register_device_iseries(char *type,
- uint32_t unit_num)
-{
- struct vio_dev *viodev;
-
- /* allocate a vio_dev for this device */
- viodev = kmalloc(sizeof(struct vio_dev), GFP_KERNEL);
- if (!viodev)
- return NULL;
- memset(viodev, 0, sizeof(struct vio_dev));
-
- snprintf(viodev->dev.bus_id, BUS_ID_SIZE, "%s%d", type, unit_num);
-
- viodev->name = viodev->dev.bus_id;
- viodev->type = type;
- viodev->unit_address = unit_num;
- viodev->iommu_table = &vio_iommu_table;
- if (vio_register_device(viodev) == NULL) {
- kfree(viodev);
- return NULL;
- }
- return viodev;
-}
-
-void __init probe_bus_iseries(void)
-{
- HvLpIndexMap vlan_map;
- struct vio_dev *viodev;
- int i;
-
- /* there is only one of each of these */
- vio_register_device_iseries("viocons", 0);
- vio_register_device_iseries("vscsi", 0);
-
- vlan_map = HvLpConfig_getVirtualLanIndexMap();
- for (i = 0; i < HVMAXARCHITECTEDVIRTUALLANS; i++) {
- if ((vlan_map & (0x8000 >> i)) == 0)
- continue;
- viodev = vio_register_device_iseries("vlan", i);
- /* veth is special and has it own iommu_table */
- viodev->iommu_table = &veth_iommu_table;
- }
- for (i = 0; i < HVMAXARCHITECTEDVIRTUALDISKS; i++)
- vio_register_device_iseries("viodasd", i);
- for (i = 0; i < HVMAXARCHITECTEDVIRTUALCDROMS; i++)
- vio_register_device_iseries("viocd", i);
- for (i = 0; i < HVMAXARCHITECTEDVIRTUALTAPES; i++)
- vio_register_device_iseries("viotape", i);
-}
-
-/**
- * vio_match_device_iseries: - Tell if a iSeries VIO device matches a
- * vio_device_id
- */
-static int vio_match_device_iseries(const struct vio_device_id *id,
- const struct vio_dev *dev)
-{
- return strncmp(dev->type, id->type, strlen(id->type)) == 0;
-}
-
-static struct vio_bus_ops vio_bus_ops_iseries = {
- .match = vio_match_device_iseries,
-};
-
-/**
- * vio_bus_init_iseries: - Initialize the iSeries virtual IO bus
- */
-static int __init vio_bus_init_iseries(void)
-{
- int err;
-
- err = vio_bus_init(&vio_bus_ops_iseries);
- if (err == 0) {
- iommu_vio_init();
- vio_bus_device.iommu_table = &vio_iommu_table;
- iSeries_vio_dev = &vio_bus_device.dev;
- probe_bus_iseries();
- }
- return err;
-}
-
-__initcall(vio_bus_init_iseries);
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index 85d6c93..9a4efc0 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -437,9 +437,6 @@
/* Tell pci.c to not change any resource allocations. */
pci_probe_only = 1;
-
- /* Allow all IO */
- io_page_mask = -1;
}
int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel)
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 24c0aef..a0505ea 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -189,7 +189,7 @@
conswitchp = &dummy_con;
#endif
- printk(KERN_INFO "Using native/NAP idle loop\n");
+ printk(KERN_DEBUG "Using native/NAP idle loop\n");
}
/*
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index a5063cd..85e00cb 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -2510,7 +2510,7 @@
if (get_property(np, "flush-on-lock", NULL))
break;
powersave_nap = 1;
- printk(KERN_INFO "Processor NAP mode on idle enabled.\n");
+ printk(KERN_DEBUG "Processor NAP mode on idle enabled.\n");
break;
}
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index ea179af..8003585 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -1068,9 +1068,6 @@
/* Tell pci.c to not use the common resource allocation mechanism */
pci_probe_only = 1;
- /* Allow all IO */
- io_page_mask = -1;
-
#else /* CONFIG_PPC64 */
init_p2pbridge();
fixup_nec_usb2();
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 9308986..b46ce3b 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -2,7 +2,6 @@
setup.o iommu.o ras.o rtasd.o pci_dlpar.o \
firmware.o
obj-$(CONFIG_SMP) += smp.o
-obj-$(CONFIG_IBMVIO) += vio.o
obj-$(CONFIG_XICS) += xics.o
obj-$(CONFIG_SCANLOG) += scanlog.o
obj-$(CONFIG_EEH) += eeh.o eeh_cache.o eeh_driver.o eeh_event.o
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index 1fba695..2a9eb26 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -23,9 +23,8 @@
*
*/
#include <linux/delay.h>
-#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <linux/notifier.h>
+#include <linux/irq.h>
#include <linux/pci.h>
#include <asm/eeh.h>
#include <asm/eeh_event.h>
@@ -250,7 +249,7 @@
*/
#define MAX_WAIT_FOR_RECOVERY 15
-void handle_eeh_events (struct eeh_event *event)
+struct pci_dn * handle_eeh_events (struct eeh_event *event)
{
struct device_node *frozen_dn;
struct pci_dn *frozen_pdn;
@@ -265,7 +264,7 @@
if (!frozen_dn) {
printk(KERN_ERR "EEH: Error: Cannot find partition endpoint for %s\n",
pci_name(event->dev));
- return;
+ return NULL;
}
/* There are two different styles for coming up with the PE.
@@ -280,7 +279,7 @@
if (!frozen_bus) {
printk(KERN_ERR "EEH: Cannot find PCI bus for %s\n",
frozen_dn->full_name);
- return;
+ return NULL;
}
#if 0
@@ -355,7 +354,7 @@
/* Tell all device drivers that they can resume operations */
pci_walk_bus(frozen_bus, eeh_report_resume, NULL);
- return;
+ return frozen_pdn;
excess_failures:
/*
@@ -384,6 +383,8 @@
/* Shut down the device drivers for good. */
pcibios_remove_pci_devices(frozen_bus);
+
+ return NULL;
}
/* ---------- end of file ---------- */
diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c
index 40020c6..8f2d129 100644
--- a/arch/powerpc/platforms/pseries/eeh_event.c
+++ b/arch/powerpc/platforms/pseries/eeh_event.c
@@ -18,6 +18,7 @@
* Copyright (c) 2005 Linas Vepstas <linas@linas.org>
*/
+#include <linux/delay.h>
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/pci.h>
@@ -56,38 +57,43 @@
{
unsigned long flags;
struct eeh_event *event;
+ struct pci_dn *pdn;
daemonize ("eehd");
+ set_current_state(TASK_INTERRUPTIBLE);
- while (1) {
- set_current_state(TASK_INTERRUPTIBLE);
+ spin_lock_irqsave(&eeh_eventlist_lock, flags);
+ event = NULL;
- spin_lock_irqsave(&eeh_eventlist_lock, flags);
- event = NULL;
+ /* Unqueue the event, get ready to process. */
+ if (!list_empty(&eeh_eventlist)) {
+ event = list_entry(eeh_eventlist.next, struct eeh_event, list);
+ list_del(&event->list);
+ }
+ spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
- /* Unqueue the event, get ready to process. */
- if (!list_empty(&eeh_eventlist)) {
- event = list_entry(eeh_eventlist.next, struct eeh_event, list);
- list_del(&event->list);
- }
- spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
+ if (event == NULL)
+ return 0;
- if (event == NULL)
- break;
+ /* Serialize processing of EEH events */
+ mutex_lock(&eeh_event_mutex);
+ eeh_mark_slot(event->dn, EEH_MODE_RECOVERING);
- /* Serialize processing of EEH events */
- mutex_lock(&eeh_event_mutex);
- eeh_mark_slot(event->dn, EEH_MODE_RECOVERING);
+ printk(KERN_INFO "EEH: Detected PCI bus error on device %s\n",
+ pci_name(event->dev));
- printk(KERN_INFO "EEH: Detected PCI bus error on device %s\n",
- pci_name(event->dev));
+ pdn = handle_eeh_events(event);
- handle_eeh_events(event);
+ eeh_clear_slot(event->dn, EEH_MODE_RECOVERING);
+ pci_dev_put(event->dev);
+ kfree(event);
+ mutex_unlock(&eeh_event_mutex);
- eeh_clear_slot(event->dn, EEH_MODE_RECOVERING);
- pci_dev_put(event->dev);
- kfree(event);
- mutex_unlock(&eeh_event_mutex);
+ /* If there are no new errors after an hour, clear the counter. */
+ if (pdn && pdn->eeh_freeze_count>0) {
+ msleep_interruptible (3600*1000);
+ if (pdn->eeh_freeze_count>0)
+ pdn->eeh_freeze_count--;
}
return 0;
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 2643078..ed102f3 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -1,23 +1,24 @@
/*
* Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
*
- * Rewrite, cleanup:
+ * Rewrite, cleanup:
*
* Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
+ * Copyright (C) 2006 Olof Johansson <olof@lixom.net>
*
* Dynamic DMA mapping support, pSeries-specific parts, both SMP and LPAR.
*
- *
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
- *
+ *
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
+ *
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
@@ -49,52 +50,46 @@
#define DBG(fmt...)
-static void tce_build_pSeries(struct iommu_table *tbl, long index,
- long npages, unsigned long uaddr,
+static void tce_build_pSeries(struct iommu_table *tbl, long index,
+ long npages, unsigned long uaddr,
enum dma_data_direction direction)
{
- union tce_entry t;
- union tce_entry *tp;
+ u64 proto_tce;
+ u64 *tcep;
+ u64 rpn;
index <<= TCE_PAGE_FACTOR;
npages <<= TCE_PAGE_FACTOR;
- t.te_word = 0;
- t.te_rdwr = 1; // Read allowed
+ proto_tce = TCE_PCI_READ; // Read allowed
if (direction != DMA_TO_DEVICE)
- t.te_pciwr = 1;
+ proto_tce |= TCE_PCI_WRITE;
- tp = ((union tce_entry *)tbl->it_base) + index;
+ tcep = ((u64 *)tbl->it_base) + index;
while (npages--) {
/* can't move this out since we might cross LMB boundary */
- t.te_rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
-
- tp->te_word = t.te_word;
+ rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
+ *tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
uaddr += TCE_PAGE_SIZE;
- tp++;
+ tcep++;
}
}
static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages)
{
- union tce_entry t;
- union tce_entry *tp;
+ u64 *tcep;
npages <<= TCE_PAGE_FACTOR;
index <<= TCE_PAGE_FACTOR;
- t.te_word = 0;
- tp = ((union tce_entry *)tbl->it_base) + index;
-
- while (npages--) {
- tp->te_word = t.te_word;
-
- tp++;
- }
+ tcep = ((u64 *)tbl->it_base) + index;
+
+ while (npages--)
+ *(tcep++) = 0;
}
@@ -103,43 +98,44 @@
enum dma_data_direction direction)
{
u64 rc;
- union tce_entry tce;
+ u64 proto_tce, tce;
+ u64 rpn;
tcenum <<= TCE_PAGE_FACTOR;
npages <<= TCE_PAGE_FACTOR;
- tce.te_word = 0;
- tce.te_rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
- tce.te_rdwr = 1;
+ rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
+ proto_tce = TCE_PCI_READ;
if (direction != DMA_TO_DEVICE)
- tce.te_pciwr = 1;
+ proto_tce |= TCE_PCI_WRITE;
while (npages--) {
- rc = plpar_tce_put((u64)tbl->it_index,
- (u64)tcenum << 12,
- tce.te_word );
-
+ tce = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
+ rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, tce);
+
if (rc && printk_ratelimit()) {
printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
printk("\tindex = 0x%lx\n", (u64)tbl->it_index);
printk("\ttcenum = 0x%lx\n", (u64)tcenum);
- printk("\ttce val = 0x%lx\n", tce.te_word );
+ printk("\ttce val = 0x%lx\n", tce );
show_stack(current, (unsigned long *)__get_SP());
}
-
+
tcenum++;
- tce.te_rpn++;
+ rpn++;
}
}
-static DEFINE_PER_CPU(void *, tce_page) = NULL;
+static DEFINE_PER_CPU(u64 *, tce_page) = NULL;
static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
long npages, unsigned long uaddr,
enum dma_data_direction direction)
{
u64 rc;
- union tce_entry tce, *tcep;
+ u64 proto_tce;
+ u64 *tcep;
+ u64 rpn;
long l, limit;
if (TCE_PAGE_FACTOR == 0 && npages == 1)
@@ -152,7 +148,7 @@
* from iommu_alloc{,_sg}()
*/
if (!tcep) {
- tcep = (void *)__get_free_page(GFP_ATOMIC);
+ tcep = (u64 *)__get_free_page(GFP_ATOMIC);
/* If allocation fails, fall back to the loop implementation */
if (!tcep)
return tce_build_pSeriesLP(tbl, tcenum, npages,
@@ -163,11 +159,10 @@
tcenum <<= TCE_PAGE_FACTOR;
npages <<= TCE_PAGE_FACTOR;
- tce.te_word = 0;
- tce.te_rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
- tce.te_rdwr = 1;
+ rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
+ proto_tce = TCE_PCI_READ;
if (direction != DMA_TO_DEVICE)
- tce.te_pciwr = 1;
+ proto_tce |= TCE_PCI_WRITE;
/* We can map max one pageful of TCEs at a time */
do {
@@ -175,11 +170,11 @@
* Set up the page with TCE data, looping through and setting
* the values.
*/
- limit = min_t(long, npages, 4096/sizeof(union tce_entry));
+ limit = min_t(long, npages, 4096/TCE_ENTRY_SIZE);
for (l = 0; l < limit; l++) {
- tcep[l] = tce;
- tce.te_rpn++;
+ tcep[l] = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
+ rpn++;
}
rc = plpar_tce_put_indirect((u64)tbl->it_index,
@@ -195,7 +190,7 @@
printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
printk("\tindex = 0x%lx\n", (u64)tbl->it_index);
printk("\tnpages = 0x%lx\n", (u64)npages);
- printk("\ttce[0] val = 0x%lx\n", tcep[0].te_word);
+ printk("\ttce[0] val = 0x%lx\n", tcep[0]);
show_stack(current, (unsigned long *)__get_SP());
}
}
@@ -203,23 +198,17 @@
static void tce_free_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages)
{
u64 rc;
- union tce_entry tce;
tcenum <<= TCE_PAGE_FACTOR;
npages <<= TCE_PAGE_FACTOR;
- tce.te_word = 0;
-
while (npages--) {
- rc = plpar_tce_put((u64)tbl->it_index,
- (u64)tcenum << 12,
- tce.te_word);
+ rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, 0);
if (rc && printk_ratelimit()) {
printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
printk("\tindex = 0x%lx\n", (u64)tbl->it_index);
printk("\ttcenum = 0x%lx\n", (u64)tcenum);
- printk("\ttce val = 0x%lx\n", tce.te_word );
show_stack(current, (unsigned long *)__get_SP());
}
@@ -231,31 +220,24 @@
static void tce_freemulti_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages)
{
u64 rc;
- union tce_entry tce;
tcenum <<= TCE_PAGE_FACTOR;
npages <<= TCE_PAGE_FACTOR;
- tce.te_word = 0;
-
- rc = plpar_tce_stuff((u64)tbl->it_index,
- (u64)tcenum << 12,
- tce.te_word,
- npages);
+ rc = plpar_tce_stuff((u64)tbl->it_index, (u64)tcenum << 12, 0, npages);
if (rc && printk_ratelimit()) {
printk("tce_freemulti_pSeriesLP: plpar_tce_stuff failed\n");
printk("\trc = %ld\n", rc);
printk("\tindex = 0x%lx\n", (u64)tbl->it_index);
printk("\tnpages = 0x%lx\n", (u64)npages);
- printk("\ttce val = 0x%lx\n", tce.te_word );
show_stack(current, (unsigned long *)__get_SP());
}
}
static void iommu_table_setparms(struct pci_controller *phb,
struct device_node *dn,
- struct iommu_table *tbl)
+ struct iommu_table *tbl)
{
struct device_node *node;
unsigned long *basep;
@@ -275,16 +257,16 @@
memset((void *)tbl->it_base, 0, *sizep);
tbl->it_busno = phb->bus->number;
-
+
/* Units of tce entries */
tbl->it_offset = phb->dma_window_base_cur >> PAGE_SHIFT;
-
+
/* Test if we are going over 2GB of DMA space */
if (phb->dma_window_base_cur + phb->dma_window_size > 0x80000000ul) {
udbg_printf("PCI_DMA: Unexpected number of IOAs under this PHB.\n");
- panic("PCI_DMA: Unexpected number of IOAs under this PHB.\n");
+ panic("PCI_DMA: Unexpected number of IOAs under this PHB.\n");
}
-
+
phb->dma_window_base_cur += phb->dma_window_size;
/* Set the tce table size - measured in entries */
@@ -442,7 +424,7 @@
tbl = (struct iommu_table *)kmalloc(sizeof(struct iommu_table),
GFP_KERNEL);
-
+
iommu_table_setparms_lpar(ppci->phb, pdn, tbl, dma_window);
ppci->iommu_table = iommu_init_table(tbl);
diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c
index e0000ce..2e4e040 100644
--- a/arch/powerpc/platforms/pseries/rtasd.c
+++ b/arch/powerpc/platforms/pseries/rtasd.c
@@ -348,7 +348,7 @@
return 0;
if (error == -EINVAL) {
- printk(KERN_INFO "rtasd: surveillance not supported\n");
+ printk(KERN_DEBUG "rtasd: surveillance not supported\n");
return 0;
}
@@ -440,7 +440,7 @@
goto error;
}
- printk(KERN_INFO "RTAS daemon started\n");
+ printk(KERN_DEBUG "RTAS daemon started\n");
DEBUG("will sleep for %d milliseconds\n", (30000/rtas_event_scan_rate));
@@ -487,7 +487,7 @@
/* No RTAS */
if (rtas_token("event-scan") == RTAS_UNKNOWN_SERVICE) {
- printk(KERN_INFO "rtasd: no event-scan on system\n");
+ printk(KERN_DEBUG "rtasd: no event-scan on system\n");
return -ENODEV;
}
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 5eb55ef..9118d79 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -235,14 +235,14 @@
if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
vpa_init(boot_cpuid);
if (get_lppaca()->shared_proc) {
- printk(KERN_INFO "Using shared processor idle loop\n");
+ printk(KERN_DEBUG "Using shared processor idle loop\n");
ppc_md.power_save = pseries_shared_idle_sleep;
} else {
- printk(KERN_INFO "Using dedicated idle loop\n");
+ printk(KERN_DEBUG "Using dedicated idle loop\n");
ppc_md.power_save = pseries_dedicated_idle_sleep;
}
} else {
- printk(KERN_INFO "Using default idle loop\n");
+ printk(KERN_DEBUG "Using default idle loop\n");
}
if (firmware_has_feature(FW_FEATURE_LPAR))
diff --git a/arch/powerpc/platforms/pseries/vio.c b/arch/powerpc/platforms/pseries/vio.c
deleted file mode 100644
index 8e53e04..0000000
--- a/arch/powerpc/platforms/pseries/vio.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * IBM PowerPC pSeries Virtual I/O Infrastructure Support.
- *
- * Copyright (c) 2003-2005 IBM Corp.
- * Dave Engebretsen engebret@us.ibm.com
- * Santiago Leon santil@us.ibm.com
- * Hollis Blanchard <hollisb@us.ibm.com>
- * Stephen Rothwell
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/kobject.h>
-#include <asm/iommu.h>
-#include <asm/dma.h>
-#include <asm/prom.h>
-#include <asm/vio.h>
-#include <asm/hvcall.h>
-#include <asm/tce.h>
-
-extern struct subsystem devices_subsys; /* needed for vio_find_name() */
-
-static void probe_bus_pseries(void)
-{
- struct device_node *node_vroot, *of_node;
-
- node_vroot = find_devices("vdevice");
- if ((node_vroot == NULL) || (node_vroot->child == NULL))
- /* this machine doesn't do virtual IO, and that's ok */
- return;
-
- /*
- * Create struct vio_devices for each virtual device in the device tree.
- * Drivers will associate with them later.
- */
- for (of_node = node_vroot->child; of_node != NULL;
- of_node = of_node->sibling) {
- printk(KERN_DEBUG "%s: processing %p\n", __FUNCTION__, of_node);
- vio_register_device_node(of_node);
- }
-}
-
-/**
- * vio_match_device_pseries: - Tell if a pSeries VIO device matches a
- * vio_device_id
- */
-static int vio_match_device_pseries(const struct vio_device_id *id,
- const struct vio_dev *dev)
-{
- return (strncmp(dev->type, id->type, strlen(id->type)) == 0) &&
- device_is_compatible(dev->dev.platform_data, id->compat);
-}
-
-static void vio_release_device_pseries(struct device *dev)
-{
- /* XXX free TCE table */
- of_node_put(dev->platform_data);
-}
-
-static ssize_t viodev_show_devspec(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct device_node *of_node = dev->platform_data;
-
- return sprintf(buf, "%s\n", of_node->full_name);
-}
-DEVICE_ATTR(devspec, S_IRUSR | S_IRGRP | S_IROTH, viodev_show_devspec, NULL);
-
-static void vio_unregister_device_pseries(struct vio_dev *viodev)
-{
- device_remove_file(&viodev->dev, &dev_attr_devspec);
-}
-
-static struct vio_bus_ops vio_bus_ops_pseries = {
- .match = vio_match_device_pseries,
- .unregister_device = vio_unregister_device_pseries,
- .release_device = vio_release_device_pseries,
-};
-
-/**
- * vio_bus_init_pseries: - Initialize the pSeries virtual IO bus
- */
-static int __init vio_bus_init_pseries(void)
-{
- int err;
-
- err = vio_bus_init(&vio_bus_ops_pseries);
- if (err == 0)
- probe_bus_pseries();
- return err;
-}
-
-__initcall(vio_bus_init_pseries);
-
-/**
- * vio_build_iommu_table: - gets the dma information from OF and
- * builds the TCE tree.
- * @dev: the virtual device.
- *
- * Returns a pointer to the built tce tree, or NULL if it can't
- * find property.
-*/
-static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev)
-{
- unsigned int *dma_window;
- struct iommu_table *newTceTable;
- unsigned long offset;
- int dma_window_property_size;
-
- dma_window = (unsigned int *) get_property(dev->dev.platform_data, "ibm,my-dma-window", &dma_window_property_size);
- if(!dma_window) {
- return NULL;
- }
-
- newTceTable = (struct iommu_table *) kmalloc(sizeof(struct iommu_table), GFP_KERNEL);
-
- /* There should be some code to extract the phys-encoded offset
- using prom_n_addr_cells(). However, according to a comment
- on earlier versions, it's always zero, so we don't bother */
- offset = dma_window[1] >> PAGE_SHIFT;
-
- /* TCE table size - measured in tce entries */
- newTceTable->it_size = dma_window[4] >> PAGE_SHIFT;
- /* offset for VIO should always be 0 */
- newTceTable->it_offset = offset;
- newTceTable->it_busno = 0;
- newTceTable->it_index = (unsigned long)dma_window[0];
- newTceTable->it_type = TCE_VB;
-
- return iommu_init_table(newTceTable);
-}
-
-/**
- * vio_register_device_node: - Register a new vio device.
- * @of_node: The OF node for this device.
- *
- * Creates and initializes a vio_dev structure from the data in
- * of_node (dev.platform_data) and adds it to the list of virtual devices.
- * Returns a pointer to the created vio_dev or NULL if node has
- * NULL device_type or compatible fields.
- */
-struct vio_dev * __devinit vio_register_device_node(struct device_node *of_node)
-{
- struct vio_dev *viodev;
- unsigned int *unit_address;
- unsigned int *irq_p;
-
- /* we need the 'device_type' property, in order to match with drivers */
- if ((NULL == of_node->type)) {
- printk(KERN_WARNING
- "%s: node %s missing 'device_type'\n", __FUNCTION__,
- of_node->name ? of_node->name : "<unknown>");
- return NULL;
- }
-
- unit_address = (unsigned int *)get_property(of_node, "reg", NULL);
- if (!unit_address) {
- printk(KERN_WARNING "%s: node %s missing 'reg'\n", __FUNCTION__,
- of_node->name ? of_node->name : "<unknown>");
- return NULL;
- }
-
- /* allocate a vio_dev for this node */
- viodev = kmalloc(sizeof(struct vio_dev), GFP_KERNEL);
- if (!viodev) {
- return NULL;
- }
- memset(viodev, 0, sizeof(struct vio_dev));
-
- viodev->dev.platform_data = of_node_get(of_node);
-
- viodev->irq = NO_IRQ;
- irq_p = (unsigned int *)get_property(of_node, "interrupts", NULL);
- if (irq_p) {
- int virq = virt_irq_create_mapping(*irq_p);
- if (virq == NO_IRQ) {
- printk(KERN_ERR "Unable to allocate interrupt "
- "number for %s\n", of_node->full_name);
- } else
- viodev->irq = irq_offset_up(virq);
- }
-
- snprintf(viodev->dev.bus_id, BUS_ID_SIZE, "%x", *unit_address);
- viodev->name = of_node->name;
- viodev->type = of_node->type;
- viodev->unit_address = *unit_address;
- viodev->iommu_table = vio_build_iommu_table(viodev);
-
- /* register with generic device framework */
- if (vio_register_device(viodev) == NULL) {
- /* XXX free TCE table */
- kfree(viodev);
- return NULL;
- }
- device_create_file(&viodev->dev, &dev_attr_devspec);
-
- return viodev;
-}
-EXPORT_SYMBOL(vio_register_device_node);
-
-/**
- * vio_get_attribute: - get attribute for virtual device
- * @vdev: The vio device to get property.
- * @which: The property/attribute to be extracted.
- * @length: Pointer to length of returned data size (unused if NULL).
- *
- * Calls prom.c's get_property() to return the value of the
- * attribute specified by the preprocessor constant @which
-*/
-const void * vio_get_attribute(struct vio_dev *vdev, void* which, int* length)
-{
- return get_property(vdev->dev.platform_data, (char*)which, length);
-}
-EXPORT_SYMBOL(vio_get_attribute);
-
-/* vio_find_name() - internal because only vio.c knows how we formatted the
- * kobject name
- * XXX once vio_bus_type.devices is actually used as a kset in
- * drivers/base/bus.c, this function should be removed in favor of
- * "device_find(kobj_name, &vio_bus_type)"
- */
-static struct vio_dev *vio_find_name(const char *kobj_name)
-{
- struct kobject *found;
-
- found = kset_find_obj(&devices_subsys.kset, kobj_name);
- if (!found)
- return NULL;
-
- return to_vio_dev(container_of(found, struct device, kobj));
-}
-
-/**
- * vio_find_node - find an already-registered vio_dev
- * @vnode: device_node of the virtual device we're looking for
- */
-struct vio_dev *vio_find_node(struct device_node *vnode)
-{
- uint32_t *unit_address;
- char kobj_name[BUS_ID_SIZE];
-
- /* construct the kobject name from the device node */
- unit_address = (uint32_t *)get_property(vnode, "reg", NULL);
- if (!unit_address)
- return NULL;
- snprintf(kobj_name, BUS_ID_SIZE, "%x", *unit_address);
-
- return vio_find_name(kobj_name);
-}
-EXPORT_SYMBOL(vio_find_node);
-
-int vio_enable_interrupts(struct vio_dev *dev)
-{
- int rc = h_vio_signal(dev->unit_address, VIO_IRQ_ENABLE);
- if (rc != H_SUCCESS)
- printk(KERN_ERR "vio: Error 0x%x enabling interrupts\n", rc);
- return rc;
-}
-EXPORT_SYMBOL(vio_enable_interrupts);
-
-int vio_disable_interrupts(struct vio_dev *dev)
-{
- int rc = h_vio_signal(dev->unit_address, VIO_IRQ_DISABLE);
- if (rc != H_SUCCESS)
- printk(KERN_ERR "vio: Error 0x%x disabling interrupts\n", rc);
- return rc;
-}
-EXPORT_SYMBOL(vio_disable_interrupts);
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index 2d60ea3..b14f9b5 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -522,7 +522,7 @@
np = of_find_node_by_type(NULL, "interrupt-controller");
if (!np) {
- printk(KERN_WARNING "xics: no ISA interrupt controller\n");
+ printk(KERN_DEBUG "xics: no ISA interrupt controller\n");
xics_irq_8259_cascade_real = -1;
xics_irq_8259_cascade = -1;
} else {
@@ -641,23 +641,26 @@
ops->cppr_info(cpu, 0x00);
iosync();
+ /* Clear IPI */
+ ops->qirr_info(cpu, 0xff);
+
+ /*
+ * we need to EOI the IPI if we got here from kexec down IPI
+ *
+ * probably need to check all the other interrupts too
+ * should we be flagging idle loop instead?
+ * or creating some task to be scheduled?
+ */
+ ops->xirr_info_set(cpu, XICS_IPI);
+
/*
* Some machines need to have at least one cpu in the GIQ,
* so leave the master cpu in the group.
*/
- if (secondary) {
- /*
- * we need to EOI the IPI if we got here from kexec down IPI
- *
- * probably need to check all the other interrupts too
- * should we be flagging idle loop instead?
- * or creating some task to be scheduled?
- */
- ops->xirr_info_set(cpu, XICS_IPI);
+ if (secondary)
rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
(1UL << interrupt_server_size) - 1 -
default_distrib_server, 0);
- }
}
#ifdef CONFIG_HOTPLUG_CPU
diff --git a/drivers/char/hvsi.c b/drivers/char/hvsi.c
index a952218..a0370ed 100644
--- a/drivers/char/hvsi.c
+++ b/drivers/char/hvsi.c
@@ -1179,7 +1179,7 @@
if (tty_register_driver(hvsi_driver))
panic("Couldn't register hvsi console driver\n");
- printk(KERN_INFO "HVSI: registered %i devices\n", hvsi_count);
+ printk(KERN_DEBUG "HVSI: registered %i devices\n", hvsi_count);
return 0;
}
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index 52d0102..37965dc 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -61,7 +61,7 @@
#undef DEBUG
#define ibmveth_printk(fmt, args...) \
- printk(KERN_INFO "%s: " fmt, __FILE__, ## args)
+ printk(KERN_DEBUG "%s: " fmt, __FILE__, ## args)
#define ibmveth_error_printk(fmt, args...) \
printk(KERN_ERR "(%s:%3.3d ua:%x) ERROR: " fmt, __FILE__, __LINE__ , adapter->vdev->unit_address, ## args)
diff --git a/include/asm-powerpc/eeh.h b/include/asm-powerpc/eeh.h
index 868c713..2c3dc4a 100644
--- a/include/asm-powerpc/eeh.h
+++ b/include/asm-powerpc/eeh.h
@@ -293,8 +293,6 @@
static inline u8 eeh_inb(unsigned long port)
{
u8 val;
- if (!_IO_IS_VALID(port))
- return ~0;
val = in_8((u8 __iomem *)(port+pci_io_base));
if (EEH_POSSIBLE_ERROR(val, u8))
return eeh_check_failure((void __iomem *)(port), val);
@@ -303,15 +301,12 @@
static inline void eeh_outb(u8 val, unsigned long port)
{
- if (_IO_IS_VALID(port))
- out_8((u8 __iomem *)(port+pci_io_base), val);
+ out_8((u8 __iomem *)(port+pci_io_base), val);
}
static inline u16 eeh_inw(unsigned long port)
{
u16 val;
- if (!_IO_IS_VALID(port))
- return ~0;
val = in_le16((u16 __iomem *)(port+pci_io_base));
if (EEH_POSSIBLE_ERROR(val, u16))
return eeh_check_failure((void __iomem *)(port), val);
@@ -320,15 +315,12 @@
static inline void eeh_outw(u16 val, unsigned long port)
{
- if (_IO_IS_VALID(port))
- out_le16((u16 __iomem *)(port+pci_io_base), val);
+ out_le16((u16 __iomem *)(port+pci_io_base), val);
}
static inline u32 eeh_inl(unsigned long port)
{
u32 val;
- if (!_IO_IS_VALID(port))
- return ~0;
val = in_le32((u32 __iomem *)(port+pci_io_base));
if (EEH_POSSIBLE_ERROR(val, u32))
return eeh_check_failure((void __iomem *)(port), val);
@@ -337,8 +329,7 @@
static inline void eeh_outl(u32 val, unsigned long port)
{
- if (_IO_IS_VALID(port))
- out_le32((u32 __iomem *)(port+pci_io_base), val);
+ out_le32((u32 __iomem *)(port+pci_io_base), val);
}
/* in-string eeh macros */
diff --git a/include/asm-powerpc/eeh_event.h b/include/asm-powerpc/eeh_event.h
index 93d55a2..dc6bf0f 100644
--- a/include/asm-powerpc/eeh_event.h
+++ b/include/asm-powerpc/eeh_event.h
@@ -18,8 +18,8 @@
* Copyright (c) 2005 Linas Vepstas <linas@linas.org>
*/
-#ifndef ASM_PPC64_EEH_EVENT_H
-#define ASM_PPC64_EEH_EVENT_H
+#ifndef ASM_POWERPC_EEH_EVENT_H
+#define ASM_POWERPC_EEH_EVENT_H
#ifdef __KERNEL__
/** EEH event -- structure holding pci controller data that describes
@@ -39,7 +39,7 @@
* @dev pci device
*
* This routine builds a PCI error event which will be delivered
- * to all listeners on the peh_notifier_chain.
+ * to all listeners on the eeh_notifier_chain.
*
* This routine can be called within an interrupt context;
* the actual event will be delivered in a normal context
@@ -51,7 +51,7 @@
int time_unavail);
/* Main recovery function */
-void handle_eeh_events (struct eeh_event *);
+struct pci_dn * handle_eeh_events (struct eeh_event *);
#endif /* __KERNEL__ */
-#endif /* ASM_PPC64_EEH_EVENT_H */
+#endif /* ASM_POWERPC_EEH_EVENT_H */
diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h
index f1c2469..a9496f3 100644
--- a/include/asm-powerpc/io.h
+++ b/include/asm-powerpc/io.h
@@ -40,12 +40,6 @@
extern unsigned long isa_io_base;
extern unsigned long pci_io_base;
-extern unsigned long io_page_mask;
-
-#define MAX_ISA_PORT 0x10000
-
-#define _IO_IS_VALID(port) ((port) >= MAX_ISA_PORT || (1 << (port>>PAGE_SHIFT)) \
- & io_page_mask)
#ifdef CONFIG_PPC_ISERIES
/* __raw_* accessors aren't supported on iSeries */
diff --git a/arch/powerpc/platforms/iseries/iommu.h b/include/asm-powerpc/iseries/iommu.h
similarity index 90%
rename from arch/powerpc/platforms/iseries/iommu.h
rename to include/asm-powerpc/iseries/iommu.h
index cb5658f..0edbfe1 100644
--- a/arch/powerpc/platforms/iseries/iommu.h
+++ b/include/asm-powerpc/iseries/iommu.h
@@ -1,5 +1,5 @@
-#ifndef _PLATFORMS_ISERIES_IOMMU_H
-#define _PLATFORMS_ISERIES_IOMMU_H
+#ifndef _ASM_POWERPC_ISERIES_IOMMU_H
+#define _ASM_POWERPC_ISERIES_IOMMU_H
/*
* Copyright (C) 2005 Stephen Rothwell, IBM Corporation
@@ -32,4 +32,4 @@
unsigned char slotno, unsigned char virtbus,
struct iommu_table *tbl);
-#endif /* _PLATFORMS_ISERIES_IOMMU_H */
+#endif /* _ASM_POWERPC_ISERIES_IOMMU_H */
diff --git a/include/asm-powerpc/tce.h b/include/asm-powerpc/tce.h
index 6fa200a..c9483ad 100644
--- a/include/asm-powerpc/tce.h
+++ b/include/asm-powerpc/tce.h
@@ -35,32 +35,15 @@
#define TCE_PAGE_SIZE (1 << TCE_SHIFT)
#define TCE_PAGE_FACTOR (PAGE_SHIFT - TCE_SHIFT)
+#define TCE_ENTRY_SIZE 8 /* each TCE is 64 bits */
-/* tce_entry
- * Used by pSeries (SMP) and iSeries/pSeries LPAR, but there it's
- * abstracted so layout is irrelevant.
- */
-union tce_entry {
- unsigned long te_word;
- struct {
- unsigned int tb_cacheBits :6; /* Cache hash bits - not used */
- unsigned int tb_rsvd :6;
- unsigned long tb_rpn :40; /* Real page number */
- unsigned int tb_valid :1; /* Tce is valid (vb only) */
- unsigned int tb_allio :1; /* Tce is valid for all lps (vb only) */
- unsigned int tb_lpindex :8; /* LpIndex for user of TCE (vb only) */
- unsigned int tb_pciwr :1; /* Write allowed (pci only) */
- unsigned int tb_rdwr :1; /* Read allowed (pci), Write allowed (vb) */
- } te_bits;
-#define te_cacheBits te_bits.tb_cacheBits
-#define te_rpn te_bits.tb_rpn
-#define te_valid te_bits.tb_valid
-#define te_allio te_bits.tb_allio
-#define te_lpindex te_bits.tb_lpindex
-#define te_pciwr te_bits.tb_pciwr
-#define te_rdwr te_bits.tb_rdwr
-};
-
+#define TCE_RPN_MASK 0xfffffffffful /* 40-bit RPN (4K pages) */
+#define TCE_RPN_SHIFT 12
+#define TCE_VALID 0x800 /* TCE valid */
+#define TCE_ALLIO 0x400 /* TCE valid for all lpars */
+#define TCE_PCI_WRITE 0x2 /* write from PCI allowed */
+#define TCE_PCI_READ 0x1 /* read from PCI allowed */
+#define TCE_VB_WRITE 0x1 /* write from VB allowed */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_TCE_H */
diff --git a/include/asm-powerpc/vio.h b/include/asm-powerpc/vio.h
index 0544ece..10da7f3 100644
--- a/include/asm-powerpc/vio.h
+++ b/include/asm-powerpc/vio.h
@@ -64,32 +64,22 @@
struct device_driver driver;
};
-struct vio_bus_ops {
- int (*match)(const struct vio_device_id *id, const struct vio_dev *dev);
- void (*unregister_device)(struct vio_dev *);
- void (*release_device)(struct device *);
-};
-
extern struct dma_mapping_ops vio_dma_ops;
extern struct bus_type vio_bus_type;
-extern struct vio_dev vio_bus_device;
extern int vio_register_driver(struct vio_driver *drv);
extern void vio_unregister_driver(struct vio_driver *drv);
-extern struct vio_dev * __devinit vio_register_device(struct vio_dev *viodev);
extern void __devinit vio_unregister_device(struct vio_dev *dev);
-extern int vio_bus_init(struct vio_bus_ops *);
-
-#ifdef CONFIG_PPC_PSERIES
struct device_node;
extern struct vio_dev * __devinit vio_register_device_node(
struct device_node *node_vdev);
-extern struct vio_dev *vio_find_node(struct device_node *vnode);
-extern const void *vio_get_attribute(struct vio_dev *vdev, void *which,
+extern const void *vio_get_attribute(struct vio_dev *vdev, char *which,
int *length);
+#ifdef CONFIG_PPC_PSERIES
+extern struct vio_dev *vio_find_node(struct device_node *vnode);
extern int vio_enable_interrupts(struct vio_dev *dev);
extern int vio_disable_interrupts(struct vio_dev *dev);
#endif
diff --git a/include/asm-ppc/mpc85xx.h b/include/asm-ppc/mpc85xx.h
index f47002a..4f844eb 100644
--- a/include/asm-ppc/mpc85xx.h
+++ b/include/asm-ppc/mpc85xx.h
@@ -28,6 +28,9 @@
#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS)
#include <platforms/85xx/mpc8555_cds.h>
#endif
+#ifdef CONFIG_MPC85xx_CDS
+#include <platforms/85xx/mpc85xx_cds.h>
+#endif
#ifdef CONFIG_MPC8560_ADS
#include <platforms/85xx/mpc8560_ads.h>
#endif