r8169: keep firmware in memory.
The firmware agent is not available during resume. Loading the firmware
during open() (see eee3a96c6368f47df8df5bd4ed1843600652b337) is not
enough.
close() is run during resume through rtl8169_reset_task(), whence the
mildly natural release of firmware in the driver removal method instead.
It will help with http://bugs.debian.org/609538. It will not avoid
the 60 seconds delay when:
- there is no firmware
- the driver is loaded and the device is not up before a suspend/resume
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Jarek Kamiński <jarek@vilo.eu.org>
Cc: Hayes <hayeswang@realtek.com>
Cc: Ben Hutchings <benh@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index bb8645a..bde7d61 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -554,6 +554,8 @@
struct mii_if_info mii;
struct rtl8169_counters counters;
u32 saved_wolopts;
+
+ const struct firmware *fw;
};
MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>");
@@ -1766,6 +1768,29 @@
}
}
+static void rtl_release_firmware(struct rtl8169_private *tp)
+{
+ release_firmware(tp->fw);
+ tp->fw = NULL;
+}
+
+static int rtl_apply_firmware(struct rtl8169_private *tp, const char *fw_name)
+{
+ const struct firmware **fw = &tp->fw;
+ int rc = !*fw;
+
+ if (rc) {
+ rc = request_firmware(fw, fw_name, &tp->pci_dev->dev);
+ if (rc < 0)
+ goto out;
+ }
+
+ /* TODO: release firmware once rtl_phy_write_fw signals failures. */
+ rtl_phy_write_fw(tp, *fw);
+out:
+ return rc;
+}
+
static void rtl8169s_hw_phy_config(struct rtl8169_private *tp)
{
static const struct phy_reg phy_reg_init[] = {
@@ -2139,7 +2164,6 @@
{ 0x0d, 0xf880 }
};
void __iomem *ioaddr = tp->mmio_addr;
- const struct firmware *fw;
rtl_writephy_batch(tp, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0));
@@ -2203,11 +2227,8 @@
rtl_writephy(tp, 0x1f, 0x0005);
rtl_writephy(tp, 0x05, 0x001b);
- if (rtl_readphy(tp, 0x06) == 0xbf00 &&
- request_firmware(&fw, FIRMWARE_8168D_1, &tp->pci_dev->dev) == 0) {
- rtl_phy_write_fw(tp, fw);
- release_firmware(fw);
- } else {
+ if ((rtl_readphy(tp, 0x06) != 0xbf00) ||
+ (rtl_apply_firmware(tp, FIRMWARE_8168D_1) < 0)) {
netif_warn(tp, probe, tp->dev, "unable to apply firmware patch\n");
}
@@ -2257,7 +2278,6 @@
{ 0x0d, 0xf880 }
};
void __iomem *ioaddr = tp->mmio_addr;
- const struct firmware *fw;
rtl_writephy_batch(tp, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0));
@@ -2312,11 +2332,8 @@
rtl_writephy(tp, 0x1f, 0x0005);
rtl_writephy(tp, 0x05, 0x001b);
- if (rtl_readphy(tp, 0x06) == 0xb300 &&
- request_firmware(&fw, FIRMWARE_8168D_2, &tp->pci_dev->dev) == 0) {
- rtl_phy_write_fw(tp, fw);
- release_firmware(fw);
- } else {
+ if ((rtl_readphy(tp, 0x06) != 0xb300) ||
+ (rtl_apply_firmware(tp, FIRMWARE_8168D_2) < 0)) {
netif_warn(tp, probe, tp->dev, "unable to apply firmware patch\n");
}
@@ -3200,6 +3217,8 @@
cancel_delayed_work_sync(&tp->task);
+ rtl_release_firmware(tp);
+
unregister_netdev(dev);
if (pci_dev_run_wake(pdev))