[SCSI] mptfusion - prep for removing domain validation
This moves some functions around from within the #define
MPTSCSIH_ENABLE_DOMAIN_VALIDATION area, in preperation for generic
domain validation.
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 2d01424..a5ca749 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -152,7 +152,6 @@
static void mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char *data, int dlen);
static void mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56);
-static void mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq);
static void mptscsih_setDevicePage1Flags (u8 width, u8 factor, u8 offset, int *requestedPtr, int *configurationPtr, u8 flags);
static void mptscsih_no_negotiate(MPT_SCSI_HOST *hd, int target_id);
static int mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target, int flags);
@@ -160,18 +159,19 @@
int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd);
static int mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum);
+static int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id);
static struct work_struct mptscsih_persistTask;
#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
static int mptscsih_do_raid(MPT_SCSI_HOST *hd, u8 action, INTERNAL_CMD *io);
static void mptscsih_domainValidation(void *hd);
-static int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id);
static void mptscsih_qas_check(MPT_SCSI_HOST *hd, int id);
static int mptscsih_doDv(MPT_SCSI_HOST *hd, int channel, int target);
static void mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage);
static void mptscsih_fillbuf(char *buffer, int size, int index, int width);
static void mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id);
+static void mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq);
#endif
void mptscsih_remove(struct pci_dev *);
@@ -993,8 +993,10 @@
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
struct Scsi_Host *host = ioc->sh;
MPT_SCSI_HOST *hd;
+#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
int count;
unsigned long flags;
+#endif
int sz1;
if(!host) {
@@ -2597,9 +2599,9 @@
case MPI_EVENT_INTEGRATED_RAID: /* 0B */
{
+#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
pMpiEventDataRaid_t pRaidEventData =
(pMpiEventDataRaid_t) pEvReply->Data;
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
/* Domain Validation Needed */
if (ioc->bus_type == SPI &&
pRaidEventData->ReasonCode ==
@@ -2926,94 +2928,6 @@
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* If DV disabled (negoNvram set to USE_NVARM) or if not LUN 0, return.
- * Else set the NEED_DV flag after Read Capacity Issued (disks)
- * or Mode Sense (cdroms).
- *
- * Tapes, initTarget will set this flag on completion of Inquiry command.
- * Called only if DV_NOT_DONE flag is set
- */
-static void
-mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq)
-{
- MPT_ADAPTER *ioc = hd->ioc;
- u8 cmd;
- SpiCfgData *pSpi;
-
- ddvtprintk((MYIOC_s_NOTE_FMT
- " set_dvflags: id=%d lun=%d negoNvram=%x cmd=%x\n",
- hd->ioc->name, pReq->TargetID, pReq->LUN[1], hd->negoNvram, pReq->CDB[0]));
-
- if ((pReq->LUN[1] != 0) || (hd->negoNvram != 0))
- return;
-
- cmd = pReq->CDB[0];
-
- if ((cmd == READ_CAPACITY) || (cmd == MODE_SENSE)) {
- pSpi = &ioc->spi_data;
- if ((ioc->raid_data.isRaid & (1 << pReq->TargetID)) && ioc->raid_data.pIocPg3) {
- /* Set NEED_DV for all hidden disks
- */
- Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk;
- int numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
-
- while (numPDisk) {
- pSpi->dvStatus[pPDisk->PhysDiskID] |= MPT_SCSICFG_NEED_DV;
- ddvtprintk(("NEED_DV set for phys disk id %d\n", pPDisk->PhysDiskID));
- pPDisk++;
- numPDisk--;
- }
- }
- pSpi->dvStatus[pReq->TargetID] |= MPT_SCSICFG_NEED_DV;
- ddvtprintk(("NEED_DV set for visible disk id %d\n", pReq->TargetID));
- }
-}
-
-/* mptscsih_raid_set_dv_flags()
- *
- * New or replaced disk. Set DV flag and schedule DV.
- */
-static void
-mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id)
-{
- MPT_ADAPTER *ioc = hd->ioc;
- SpiCfgData *pSpi = &ioc->spi_data;
- Ioc3PhysDisk_t *pPDisk;
- int numPDisk;
-
- if (hd->negoNvram != 0)
- return;
-
- ddvtprintk(("DV requested for phys disk id %d\n", id));
- if (ioc->raid_data.pIocPg3) {
- pPDisk = ioc->raid_data.pIocPg3->PhysDisk;
- numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
- while (numPDisk) {
- if (id == pPDisk->PhysDiskNum) {
- pSpi->dvStatus[pPDisk->PhysDiskID] =
- (MPT_SCSICFG_NEED_DV | MPT_SCSICFG_DV_NOT_DONE);
- pSpi->forceDv = MPT_SCSICFG_NEED_DV;
- ddvtprintk(("NEED_DV set for phys disk id %d\n",
- pPDisk->PhysDiskID));
- break;
- }
- pPDisk++;
- numPDisk--;
- }
-
- if (numPDisk == 0) {
- /* The physical disk that needs DV was not found
- * in the stored IOC Page 3. The driver must reload
- * this page. DV routine will set the NEED_DV flag for
- * all phys disks that have DV_NOT_DONE set.
- */
- pSpi->forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3;
- ddvtprintk(("phys disk %d not found. Setting reload IOC Pg3 Flag\n",id));
- }
- }
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* If no Target, bus reset on 1st I/O. Set the flag to
* prevent any future negotiations to this device.
@@ -4052,6 +3966,26 @@
return 0;
}
+/* Search IOC page 3 to determine if this is hidden physical disk
+ */
+/* Search IOC page 3 to determine if this is hidden physical disk
+ */
+static int
+mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id)
+{
+ int i;
+
+ if (!ioc->raid_data.isRaid || !ioc->raid_data.pIocPg3)
+ return 0;
+
+ for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
+ if (id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID)
+ return 1;
+ }
+
+ return 0;
+}
+
#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
@@ -4205,26 +4139,6 @@
return;
}
-/* Search IOC page 3 to determine if this is hidden physical disk
- */
-/* Search IOC page 3 to determine if this is hidden physical disk
- */
-static int
-mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id)
-{
- int i;
-
- if (!ioc->raid_data.isRaid || !ioc->raid_data.pIocPg3)
- return 0;
-
- for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
- if (id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID)
- return 1;
- }
-
- return 0;
-}
-
/* Write SDP1 if no QAS has been enabled
*/
static void
@@ -5588,6 +5502,95 @@
break;
}
}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/* If DV disabled (negoNvram set to USE_NVARM) or if not LUN 0, return.
+ * Else set the NEED_DV flag after Read Capacity Issued (disks)
+ * or Mode Sense (cdroms).
+ *
+ * Tapes, initTarget will set this flag on completion of Inquiry command.
+ * Called only if DV_NOT_DONE flag is set
+ */
+static void
+mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq)
+{
+ MPT_ADAPTER *ioc = hd->ioc;
+ u8 cmd;
+ SpiCfgData *pSpi;
+
+ ddvtprintk((MYIOC_s_NOTE_FMT
+ " set_dvflags: id=%d lun=%d negoNvram=%x cmd=%x\n",
+ hd->ioc->name, pReq->TargetID, pReq->LUN[1], hd->negoNvram, pReq->CDB[0]));
+
+ if ((pReq->LUN[1] != 0) || (hd->negoNvram != 0))
+ return;
+
+ cmd = pReq->CDB[0];
+
+ if ((cmd == READ_CAPACITY) || (cmd == MODE_SENSE)) {
+ pSpi = &ioc->spi_data;
+ if ((ioc->raid_data.isRaid & (1 << pReq->TargetID)) && ioc->raid_data.pIocPg3) {
+ /* Set NEED_DV for all hidden disks
+ */
+ Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk;
+ int numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
+
+ while (numPDisk) {
+ pSpi->dvStatus[pPDisk->PhysDiskID] |= MPT_SCSICFG_NEED_DV;
+ ddvtprintk(("NEED_DV set for phys disk id %d\n", pPDisk->PhysDiskID));
+ pPDisk++;
+ numPDisk--;
+ }
+ }
+ pSpi->dvStatus[pReq->TargetID] |= MPT_SCSICFG_NEED_DV;
+ ddvtprintk(("NEED_DV set for visible disk id %d\n", pReq->TargetID));
+ }
+}
+
+/* mptscsih_raid_set_dv_flags()
+ *
+ * New or replaced disk. Set DV flag and schedule DV.
+ */
+static void
+mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id)
+{
+ MPT_ADAPTER *ioc = hd->ioc;
+ SpiCfgData *pSpi = &ioc->spi_data;
+ Ioc3PhysDisk_t *pPDisk;
+ int numPDisk;
+
+ if (hd->negoNvram != 0)
+ return;
+
+ ddvtprintk(("DV requested for phys disk id %d\n", id));
+ if (ioc->raid_data.pIocPg3) {
+ pPDisk = ioc->raid_data.pIocPg3->PhysDisk;
+ numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
+ while (numPDisk) {
+ if (id == pPDisk->PhysDiskNum) {
+ pSpi->dvStatus[pPDisk->PhysDiskID] =
+ (MPT_SCSICFG_NEED_DV | MPT_SCSICFG_DV_NOT_DONE);
+ pSpi->forceDv = MPT_SCSICFG_NEED_DV;
+ ddvtprintk(("NEED_DV set for phys disk id %d\n",
+ pPDisk->PhysDiskID));
+ break;
+ }
+ pPDisk++;
+ numPDisk--;
+ }
+
+ if (numPDisk == 0) {
+ /* The physical disk that needs DV was not found
+ * in the stored IOC Page 3. The driver must reload
+ * this page. DV routine will set the NEED_DV flag for
+ * all phys disks that have DV_NOT_DONE set.
+ */
+ pSpi->forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3;
+ ddvtprintk(("phys disk %d not found. Setting reload IOC Pg3 Flag\n",id));
+ }
+ }
+}
+
#endif /* ~MPTSCSIH_ENABLE_DOMAIN_VALIDATION */
EXPORT_SYMBOL(mptscsih_remove);