[Blackfin] arch: update defconfig of boards
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index b04e8e5..9b7123c 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -1,6 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.12
+# Linux kernel version: 2.6.22.16
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -115,7 +115,10 @@
# Processor and Board Settings
#
# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
# CONFIG_BF527 is not set
# CONFIG_BF531 is not set
# CONFIG_BF532 is not set
@@ -140,7 +143,6 @@
CONFIG_BF53x=y
CONFIG_BFIN_SINGLE_CORE=y
CONFIG_MEM_MT48LC64M4A2FB_7E=y
-CONFIG_BFIN_SHARED_FLASH_ENET=y
# CONFIG_BFIN533_EZKIT is not set
CONFIG_BFIN533_STAMP=y
# CONFIG_BFIN533_BLUETECHNIX_CM is not set
@@ -195,7 +197,7 @@
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_VCO_HZ=750000000
CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
CONFIG_MIN_SCLK_HZ=27000000
#
@@ -215,18 +217,10 @@
CONFIG_ENET_FLASH_PIN=0
CONFIG_BOOT_LOAD=0x1000
-#
-# LED Status Indicators
-#
-# CONFIG_BFIN_ALIVE_LED is not set
-# CONFIG_BFIN_IDLE_LED is not set
+
CONFIG_BFIN_SCRATCH_REG_RETN=y
# CONFIG_BFIN_SCRATCH_REG_RETE is not set
# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-CONFIG_BFIN_ALIVE_LED_PORT=0xFFC00700
-CONFIG_BFIN_ALIVE_LED_DPORT=0xFFC00730
-CONFIG_BFIN_IDLE_LED_PORT=0xFFC00700
-CONFIG_BFIN_IDLE_LED_DPORT=0xFFC00730
#
# Blackfin Kernel Optimizations
@@ -279,6 +273,7 @@
# CONFIG_BFIN_WB is not set
CONFIG_BFIN_WT=y
CONFIG_L1_MAX_PIECE=16
+# CONFIG_MPU is not set
#
# Asynchonous Memory Configuration
@@ -333,7 +328,7 @@
CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
# CONFIG_PM_WAKEUP_BY_GPIO is not set
# CONFIG_PM_WAKEUP_GPIO_API is not set
-CONFIG_PM_WAKEUP_SIC_IWR=0x100000
+CONFIG_PM_WAKEUP_SIC_IWR=0x80
#
# CPU Frequency scaling
@@ -522,7 +517,6 @@
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_MW320D=m
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
@@ -532,17 +526,6 @@
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_BF5xx=m
-CONFIG_BFIN_FLASH_SIZE=0x400000
-CONFIG_EBIU_FLASH_BASE=0x20000000
-
-#
-# FLASH_EBIU_AMBCTL Control
-#
-CONFIG_BFIN_FLASH_BANK_0=0x7BB0
-CONFIG_BFIN_FLASH_BANK_1=0x7BB0
-CONFIG_BFIN_FLASH_BANK_2=0x7BB0
-CONFIG_BFIN_FLASH_BANK_3=0x7BB0
# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
@@ -630,8 +613,8 @@
# CONFIG_SMSC911X is not set
# CONFIG_DM9000 is not set
CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
# CONFIG_AX88180 is not set
+CONFIG_NETDEV_10000=y
#
# Wireless LAN
@@ -687,7 +670,6 @@
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_UINPUT is not set
-# CONFIG_BF53X_PFBUTTONS is not set
CONFIG_TWI_KEYPAD=m
CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39
@@ -711,8 +693,6 @@
CONFIG_TWI_LCD=m
CONFIG_TWI_LCD_SLAVE_ADDR=34
# CONFIG_AD5304 is not set
-# CONFIG_BF5xx_TEA5764 is not set
-# CONFIG_BF5xx_FBDMA is not set
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
@@ -778,7 +758,6 @@
#
# I2C Hardware Bus support
#
-# CONFIG_I2C_BLACKFIN_GPIO is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set