| /* |
| |
| bt8xx GPIO abuser |
| |
| Copyright (C) 2008 Michael Buesch <mb@bu3sch.de> |
| |
| Please do _only_ contact the people listed _above_ with issues related to this driver. |
| All the other people listed below are not related to this driver. Their names |
| are only here, because this driver is derived from the bt848 driver. |
| |
| |
| Derived from the bt848 driver: |
| |
| Copyright (C) 1996,97,98 Ralph Metzler |
| & Marcus Metzler |
| (c) 1999-2002 Gerd Knorr |
| |
| some v4l2 code lines are taken from Justin's bttv2 driver which is |
| (c) 2000 Justin Schoeman |
| |
| V4L1 removal from: |
| (c) 2005-2006 Nickolay V. Shmyrev |
| |
| Fixes to be fully V4L2 compliant by |
| (c) 2006 Mauro Carvalho Chehab |
| |
| Cropping and overscan support |
| Copyright (C) 2005, 2006 Michael H. Schimek |
| Sponsored by OPQ Systems AB |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/spinlock.h> |
| |
| #include <asm/gpio.h> |
| |
| /* Steal the hardware definitions from the bttv driver. */ |
| #include "../media/video/bt8xx/bt848.h" |
| |
| |
| #define BT8XXGPIO_NR_GPIOS 24 /* We have 24 GPIO pins */ |
| |
| |
| struct bt8xxgpio { |
| spinlock_t lock; |
| |
| void __iomem *mmio; |
| struct pci_dev *pdev; |
| struct gpio_chip gpio; |
| |
| #ifdef CONFIG_PM |
| u32 saved_outen; |
| u32 saved_data; |
| #endif |
| }; |
| |
| #define bgwrite(dat, adr) writel((dat), bg->mmio+(adr)) |
| #define bgread(adr) readl(bg->mmio+(adr)) |
| |
| |
| static int modparam_gpiobase = -1/* dynamic */; |
| module_param_named(gpiobase, modparam_gpiobase, int, 0444); |
| MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, which is the default."); |
| |
| |
| static int bt8xxgpio_gpio_direction_input(struct gpio_chip *gpio, unsigned nr) |
| { |
| struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio); |
| unsigned long flags; |
| u32 outen, data; |
| |
| spin_lock_irqsave(&bg->lock, flags); |
| |
| data = bgread(BT848_GPIO_DATA); |
| data &= ~(1 << nr); |
| bgwrite(data, BT848_GPIO_DATA); |
| |
| outen = bgread(BT848_GPIO_OUT_EN); |
| outen &= ~(1 << nr); |
| bgwrite(outen, BT848_GPIO_OUT_EN); |
| |
| spin_unlock_irqrestore(&bg->lock, flags); |
| |
| return 0; |
| } |
| |
| static int bt8xxgpio_gpio_get(struct gpio_chip *gpio, unsigned nr) |
| { |
| struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio); |
| unsigned long flags; |
| u32 val; |
| |
| spin_lock_irqsave(&bg->lock, flags); |
| val = bgread(BT848_GPIO_DATA); |
| spin_unlock_irqrestore(&bg->lock, flags); |
| |
| return !!(val & (1 << nr)); |
| } |
| |
| static int bt8xxgpio_gpio_direction_output(struct gpio_chip *gpio, |
| unsigned nr, int val) |
| { |
| struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio); |
| unsigned long flags; |
| u32 outen, data; |
| |
| spin_lock_irqsave(&bg->lock, flags); |
| |
| outen = bgread(BT848_GPIO_OUT_EN); |
| outen |= (1 << nr); |
| bgwrite(outen, BT848_GPIO_OUT_EN); |
| |
| data = bgread(BT848_GPIO_DATA); |
| if (val) |
| data |= (1 << nr); |
| else |
| data &= ~(1 << nr); |
| bgwrite(data, BT848_GPIO_DATA); |
| |
| spin_unlock_irqrestore(&bg->lock, flags); |
| |
| return 0; |
| } |
| |
| static void bt8xxgpio_gpio_set(struct gpio_chip *gpio, |
| unsigned nr, int val) |
| { |
| struct bt8xxgpio *bg = container_of(gpio, struct bt8xxgpio, gpio); |
| unsigned long flags; |
| u32 data; |
| |
| spin_lock_irqsave(&bg->lock, flags); |
| |
| data = bgread(BT848_GPIO_DATA); |
| if (val) |
| data |= (1 << nr); |
| else |
| data &= ~(1 << nr); |
| bgwrite(data, BT848_GPIO_DATA); |
| |
| spin_unlock_irqrestore(&bg->lock, flags); |
| } |
| |
| static void bt8xxgpio_gpio_setup(struct bt8xxgpio *bg) |
| { |
| struct gpio_chip *c = &bg->gpio; |
| |
| c->label = dev_name(&bg->pdev->dev); |
| c->owner = THIS_MODULE; |
| c->direction_input = bt8xxgpio_gpio_direction_input; |
| c->get = bt8xxgpio_gpio_get; |
| c->direction_output = bt8xxgpio_gpio_direction_output; |
| c->set = bt8xxgpio_gpio_set; |
| c->dbg_show = NULL; |
| c->base = modparam_gpiobase; |
| c->ngpio = BT8XXGPIO_NR_GPIOS; |
| c->can_sleep = 0; |
| } |
| |
| static int bt8xxgpio_probe(struct pci_dev *dev, |
| const struct pci_device_id *pci_id) |
| { |
| struct bt8xxgpio *bg; |
| int err; |
| |
| bg = kzalloc(sizeof(*bg), GFP_KERNEL); |
| if (!bg) |
| return -ENOMEM; |
| |
| bg->pdev = dev; |
| spin_lock_init(&bg->lock); |
| |
| err = pci_enable_device(dev); |
| if (err) { |
| printk(KERN_ERR "bt8xxgpio: Can't enable device.\n"); |
| goto err_freebg; |
| } |
| if (!request_mem_region(pci_resource_start(dev, 0), |
| pci_resource_len(dev, 0), |
| "bt8xxgpio")) { |
| printk(KERN_WARNING "bt8xxgpio: Can't request iomem (0x%llx).\n", |
| (unsigned long long)pci_resource_start(dev, 0)); |
| err = -EBUSY; |
| goto err_disable; |
| } |
| pci_set_master(dev); |
| pci_set_drvdata(dev, bg); |
| |
| bg->mmio = ioremap(pci_resource_start(dev, 0), 0x1000); |
| if (!bg->mmio) { |
| printk(KERN_ERR "bt8xxgpio: ioremap() failed\n"); |
| err = -EIO; |
| goto err_release_mem; |
| } |
| |
| /* Disable interrupts */ |
| bgwrite(0, BT848_INT_MASK); |
| |
| /* gpio init */ |
| bgwrite(0, BT848_GPIO_DMA_CTL); |
| bgwrite(0, BT848_GPIO_REG_INP); |
| bgwrite(0, BT848_GPIO_OUT_EN); |
| |
| bt8xxgpio_gpio_setup(bg); |
| err = gpiochip_add(&bg->gpio); |
| if (err) { |
| printk(KERN_ERR "bt8xxgpio: Failed to register GPIOs\n"); |
| goto err_release_mem; |
| } |
| |
| printk(KERN_INFO "bt8xxgpio: Abusing BT8xx card for GPIOs %d to %d\n", |
| bg->gpio.base, bg->gpio.base + BT8XXGPIO_NR_GPIOS - 1); |
| |
| return 0; |
| |
| err_release_mem: |
| release_mem_region(pci_resource_start(dev, 0), |
| pci_resource_len(dev, 0)); |
| pci_set_drvdata(dev, NULL); |
| err_disable: |
| pci_disable_device(dev); |
| err_freebg: |
| kfree(bg); |
| |
| return err; |
| } |
| |
| static void bt8xxgpio_remove(struct pci_dev *pdev) |
| { |
| struct bt8xxgpio *bg = pci_get_drvdata(pdev); |
| |
| gpiochip_remove(&bg->gpio); |
| |
| bgwrite(0, BT848_INT_MASK); |
| bgwrite(~0x0, BT848_INT_STAT); |
| bgwrite(0x0, BT848_GPIO_OUT_EN); |
| |
| iounmap(bg->mmio); |
| release_mem_region(pci_resource_start(pdev, 0), |
| pci_resource_len(pdev, 0)); |
| pci_disable_device(pdev); |
| |
| pci_set_drvdata(pdev, NULL); |
| kfree(bg); |
| } |
| |
| #ifdef CONFIG_PM |
| static int bt8xxgpio_suspend(struct pci_dev *pdev, pm_message_t state) |
| { |
| struct bt8xxgpio *bg = pci_get_drvdata(pdev); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&bg->lock, flags); |
| |
| bg->saved_outen = bgread(BT848_GPIO_OUT_EN); |
| bg->saved_data = bgread(BT848_GPIO_DATA); |
| |
| bgwrite(0, BT848_INT_MASK); |
| bgwrite(~0x0, BT848_INT_STAT); |
| bgwrite(0x0, BT848_GPIO_OUT_EN); |
| |
| spin_unlock_irqrestore(&bg->lock, flags); |
| |
| pci_save_state(pdev); |
| pci_disable_device(pdev); |
| pci_set_power_state(pdev, pci_choose_state(pdev, state)); |
| |
| return 0; |
| } |
| |
| static int bt8xxgpio_resume(struct pci_dev *pdev) |
| { |
| struct bt8xxgpio *bg = pci_get_drvdata(pdev); |
| unsigned long flags; |
| int err; |
| |
| pci_set_power_state(pdev, 0); |
| err = pci_enable_device(pdev); |
| if (err) |
| return err; |
| pci_restore_state(pdev); |
| |
| spin_lock_irqsave(&bg->lock, flags); |
| |
| bgwrite(0, BT848_INT_MASK); |
| bgwrite(0, BT848_GPIO_DMA_CTL); |
| bgwrite(0, BT848_GPIO_REG_INP); |
| bgwrite(bg->saved_outen, BT848_GPIO_OUT_EN); |
| bgwrite(bg->saved_data & bg->saved_outen, |
| BT848_GPIO_DATA); |
| |
| spin_unlock_irqrestore(&bg->lock, flags); |
| |
| return 0; |
| } |
| #else |
| #define bt8xxgpio_suspend NULL |
| #define bt8xxgpio_resume NULL |
| #endif /* CONFIG_PM */ |
| |
| static struct pci_device_id bt8xxgpio_pci_tbl[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT848) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT849) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT878) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT879) }, |
| { 0, }, |
| }; |
| MODULE_DEVICE_TABLE(pci, bt8xxgpio_pci_tbl); |
| |
| static struct pci_driver bt8xxgpio_pci_driver = { |
| .name = "bt8xxgpio", |
| .id_table = bt8xxgpio_pci_tbl, |
| .probe = bt8xxgpio_probe, |
| .remove = bt8xxgpio_remove, |
| .suspend = bt8xxgpio_suspend, |
| .resume = bt8xxgpio_resume, |
| }; |
| |
| static int __init bt8xxgpio_init(void) |
| { |
| return pci_register_driver(&bt8xxgpio_pci_driver); |
| } |
| module_init(bt8xxgpio_init) |
| |
| static void __exit bt8xxgpio_exit(void) |
| { |
| pci_unregister_driver(&bt8xxgpio_pci_driver); |
| } |
| module_exit(bt8xxgpio_exit) |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Michael Buesch"); |
| MODULE_DESCRIPTION("Abuse a BT8xx framegrabber card as generic GPIO card"); |