| /* linux/arch/arm/mach-exynos4/cpu.c |
| * |
| * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/sched.h> |
| #include <linux/sysdev.h> |
| |
| #include <asm/mach/map.h> |
| #include <asm/mach/irq.h> |
| |
| #include <asm/proc-fns.h> |
| #include <asm/hardware/cache-l2x0.h> |
| #include <asm/hardware/gic.h> |
| |
| #include <plat/cpu.h> |
| #include <plat/clock.h> |
| #include <plat/devs.h> |
| #include <plat/exynos4.h> |
| #include <plat/adc-core.h> |
| #include <plat/sdhci.h> |
| #include <plat/fb-core.h> |
| #include <plat/fimc-core.h> |
| #include <plat/iic-core.h> |
| #include <plat/reset.h> |
| |
| #include <mach/regs-irq.h> |
| #include <mach/regs-pmu.h> |
| |
| extern int combiner_init(unsigned int combiner_nr, void __iomem *base, |
| unsigned int irq_start); |
| extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq); |
| |
| /* Initial IO mappings */ |
| static struct map_desc exynos4_iodesc[] __initdata = { |
| { |
| .virtual = (unsigned long)S5P_VA_SYSTIMER, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_SYSTIMER), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_SYSRAM, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_CMU, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_CMU), |
| .length = SZ_128K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_PMU, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_PMU), |
| .length = SZ_64K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_COMBINER_BASE, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_COMBINER), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_COREPERI_BASE, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI), |
| .length = SZ_8K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_L2CC, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_L2CC), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_GPIO1, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO1), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_GPIO2, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO2), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_GPIO3, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO3), |
| .length = SZ_256, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_DMC0, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_DMC0), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S3C_VA_UART, |
| .pfn = __phys_to_pfn(S3C_PA_UART), |
| .length = SZ_512K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_SROMC, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S3C_VA_USB_HSPHY, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_GIC_CPU, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_CPU), |
| .length = SZ_64K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = (unsigned long)S5P_VA_GIC_DIST, |
| .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_DIST), |
| .length = SZ_64K, |
| .type = MT_DEVICE, |
| }, |
| }; |
| |
| static void exynos4_idle(void) |
| { |
| if (!need_resched()) |
| cpu_do_idle(); |
| |
| local_irq_enable(); |
| } |
| |
| static void exynos4_sw_reset(void) |
| { |
| __raw_writel(0x1, S5P_SWRESET); |
| } |
| |
| /* |
| * exynos4_map_io |
| * |
| * register the standard cpu IO areas |
| */ |
| void __init exynos4_map_io(void) |
| { |
| iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc)); |
| |
| /* initialize device information early */ |
| exynos4_default_sdhci0(); |
| exynos4_default_sdhci1(); |
| exynos4_default_sdhci2(); |
| exynos4_default_sdhci3(); |
| |
| s3c_adc_setname("samsung-adc-v3"); |
| |
| s3c_fimc_setname(0, "exynos4-fimc"); |
| s3c_fimc_setname(1, "exynos4-fimc"); |
| s3c_fimc_setname(2, "exynos4-fimc"); |
| s3c_fimc_setname(3, "exynos4-fimc"); |
| |
| /* The I2C bus controllers are directly compatible with s3c2440 */ |
| s3c_i2c0_setname("s3c2440-i2c"); |
| s3c_i2c1_setname("s3c2440-i2c"); |
| s3c_i2c2_setname("s3c2440-i2c"); |
| |
| s5p_fb_setname(0, "exynos4-fb"); |
| } |
| |
| void __init exynos4_init_clocks(int xtal) |
| { |
| printk(KERN_DEBUG "%s: initializing clocks\n", __func__); |
| |
| s3c24xx_register_baseclocks(xtal); |
| s5p_register_clocks(xtal); |
| exynos4_register_clocks(); |
| exynos4_setup_clocks(); |
| } |
| |
| static void exynos4_gic_irq_eoi(struct irq_data *d) |
| { |
| struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d); |
| |
| gic_data->cpu_base = S5P_VA_GIC_CPU + |
| (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id()); |
| } |
| |
| void __init exynos4_init_irq(void) |
| { |
| int irq; |
| |
| gic_init(0, IRQ_SPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); |
| gic_arch_extn.irq_eoi = exynos4_gic_irq_eoi; |
| |
| for (irq = 0; irq < MAX_COMBINER_NR; irq++) { |
| |
| combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq), |
| COMBINER_IRQ(irq, 0)); |
| combiner_cascade_irq(irq, IRQ_SPI(irq)); |
| } |
| |
| /* The parameters of s5p_init_irq() are for VIC init. |
| * Theses parameters should be NULL and 0 because EXYNOS4 |
| * uses GIC instead of VIC. |
| */ |
| s5p_init_irq(NULL, 0); |
| } |
| |
| struct sysdev_class exynos4_sysclass = { |
| .name = "exynos4-core", |
| }; |
| |
| static struct sys_device exynos4_sysdev = { |
| .cls = &exynos4_sysclass, |
| }; |
| |
| static int __init exynos4_core_init(void) |
| { |
| return sysdev_class_register(&exynos4_sysclass); |
| } |
| |
| core_initcall(exynos4_core_init); |
| |
| #ifdef CONFIG_CACHE_L2X0 |
| static int __init exynos4_l2x0_cache_init(void) |
| { |
| /* TAG, Data Latency Control: 2cycle */ |
| __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL); |
| __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL); |
| |
| /* L2X0 Prefetch Control */ |
| __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL); |
| |
| /* L2X0 Power Control */ |
| __raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN, |
| S5P_VA_L2CC + L2X0_POWER_CTRL); |
| |
| l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff); |
| |
| return 0; |
| } |
| |
| early_initcall(exynos4_l2x0_cache_init); |
| #endif |
| |
| int __init exynos4_init(void) |
| { |
| printk(KERN_INFO "EXYNOS4: Initializing architecture\n"); |
| |
| /* set idle function */ |
| pm_idle = exynos4_idle; |
| |
| /* set sw_reset function */ |
| s5p_reset_hook = exynos4_sw_reset; |
| |
| return sysdev_register(&exynos4_sysdev); |
| } |