Merge git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6:
xtensa: enable m41t80 driver in s6105_defconfig
xtensa: add m41t62 rtc to s6105 platform
xtensa: enable s6gmac in s6105_defconfig
xtensa: s6105 specific configuration for s6gmac
s6gmac: xtensa s6000 on-chip ethernet driver
xtensa: support s6000 gpio irqs and alternate function selection
xtensa: s6000 dma engine support
xtensa: allow variant to initialize own irq chips
xtensa: cache inquiry and unaligned cache handling functions
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 97ad190..6bf6805 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -122,3 +122,10 @@
This symbolic link appears when a device is a Virtual Function.
The symbolic link points to the PCI device sysfs entry of the
Physical Function this device associates with.
+
+What: /sys/bus/pci/slots/.../module
+Date: June 2009
+Contact: linux-pci@vger.kernel.org
+Description:
+ This symbolic link points to the PCI hotplug controller driver
+ module that manages the hotplug slot.
diff --git a/Documentation/PCI/pcieaer-howto.txt b/Documentation/PCI/pcieaer-howto.txt
index ddeb14b..be21001 100644
--- a/Documentation/PCI/pcieaer-howto.txt
+++ b/Documentation/PCI/pcieaer-howto.txt
@@ -61,6 +61,10 @@
walkaround, pls. add aerdriver.forceload=y to kernel boot parameter line
when booting kernel. Note that forceload=n by default.
+nosourceid, another parameter of type bool, can be used when broken
+hardware (mostly chipsets) has root ports that cannot obtain the reporting
+source ID. nosourceid=n by default.
+
2.3 AER error output
When a PCI-E AER error is captured, an error message will be outputed to
console. If it's a correctable error, it is outputed as a warning.
@@ -246,3 +250,24 @@
A: It could call the helper functions to enable AER in devices and
cleanup uncorrectable status register. Pls. refer to section 3.3.
+
+4. Software error injection
+
+Debugging PCIE AER error recovery code is quite difficult because it
+is hard to trigger real hardware errors. Software based error
+injection can be used to fake various kinds of PCIE errors.
+
+First you should enable PCIE AER software error injection in kernel
+configuration, that is, following item should be in your .config.
+
+CONFIG_PCIEAER_INJECT=y or CONFIG_PCIEAER_INJECT=m
+
+After reboot with new kernel or insert the module, a device file named
+/dev/aer_inject should be created.
+
+Then, you need a user space tool named aer-inject, which can be gotten
+from:
+ http://www.kernel.org/pub/linux/utils/pci/aer-inject/
+
+More information about aer-inject can be found in the document comes
+with its source code.
diff --git a/Documentation/isdn/00-INDEX b/Documentation/isdn/00-INDEX
index f6010a5..e87e336 100644
--- a/Documentation/isdn/00-INDEX
+++ b/Documentation/isdn/00-INDEX
@@ -14,25 +14,14 @@
- general info on what you need and what to do for Linux ISDN.
README.FAQ
- general info for FAQ.
-README.audio
- - info for running audio over ISDN.
-README.fax
- - info for using Fax over ISDN.
-README.gigaset
- - info on the drivers for Siemens Gigaset ISDN adapters.
-README.icn
- - info on the ICN-ISDN-card and its driver.
->>>>>>> 93af7aca44f0e82e67bda10a0fb73d383edcc8bd:Documentation/isdn/00-INDEX
README.HiSax
- info on the HiSax driver which replaces the old teles.
+README.act2000
+ - info on driver for IBM ACT-2000 card.
README.audio
- info for running audio over ISDN.
README.avmb1
- info on driver for AVM-B1 ISDN card.
-README.act2000
- - info on driver for IBM ACT-2000 card.
-README.eicon
- - info on driver for Eicon active cards.
README.concap
- info on "CONCAP" encapsulation protocol interface used for X.25.
README.diversion
@@ -59,7 +48,3 @@
- info for running X.25 over ISDN.
syncPPP.FAQ
- frequently asked questions about running PPP over ISDN.
-README.hysdn
- - info on driver for Hypercope active HYSDN cards
-README.mISDN
- - info on the Modular ISDN subsystem (mISDN).
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 08def8d..7da0899 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1776,6 +1776,9 @@
root domains (aka PCI segments, in ACPI-speak).
nommconf [X86] Disable use of MMCONFIG for PCI
Configuration
+ check_enable_amd_mmconf [X86] check for and enable
+ properly configured MMIO access to PCI
+ config space on AMD family 10h CPU
nomsi [MSI] If the PCI_MSI kernel config parameter is
enabled, this kernel boot option can be used to
disable the use of MSI interrupts system-wide.
@@ -1828,7 +1831,7 @@
IRQ routing is enabled.
noacpi [X86] Do not use ACPI for IRQ routing
or for PCI scanning.
- use_crs [X86] Use _CRS for PCI resource
+ nocrs [X86] Don't use _CRS for PCI resource
allocation.
routeirq Do IRQ routing for all PCI devices.
This is normally done in pci_enable_device(),
@@ -1865,6 +1868,12 @@
PAGE_SIZE is used as alignment.
PCI-PCI bridge can be specified, if resource
windows need to be expanded.
+ ecrc= Enable/disable PCIe ECRC (transaction layer
+ end-to-end CRC checking).
+ bios: Use BIOS/firmware settings. This is the
+ the default.
+ off: Turn ECRC off
+ on: Turn ECRC on.
pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power
Management.
diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt
index c8acd86..b486050 100644
--- a/Documentation/rfkill.txt
+++ b/Documentation/rfkill.txt
@@ -111,6 +111,8 @@
name: Name assigned by driver to this key (interface or driver name).
type: Driver type string ("wlan", "bluetooth", etc).
+ persistent: Whether the soft blocked state is initialised from
+ non-volatile storage at startup.
state: Current state of the transmitter
0: RFKILL_STATE_SOFT_BLOCKED
transmitter is turned off by software
diff --git a/MAINTAINERS b/MAINTAINERS
index 1d47043..b114632 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2853,7 +2853,7 @@
M: slapin@ossfans.org
L: linux-zigbee-devel@lists.sourceforge.net
W: http://apps.sourceforge.net/trac/linux-zigbee
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/lumag/lowpan.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
S: Maintained
F: net/ieee802154/
F: drivers/ieee802154/
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index 9a2a6e3..0e8db67 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -122,7 +122,7 @@
* passed back in "userdata".
*/
-static void eeh_report_error(struct pci_dev *dev, void *userdata)
+static int eeh_report_error(struct pci_dev *dev, void *userdata)
{
enum pci_ers_result rc, *res = userdata;
struct pci_driver *driver = dev->driver;
@@ -130,19 +130,21 @@
dev->error_state = pci_channel_io_frozen;
if (!driver)
- return;
+ return 0;
eeh_disable_irq(dev);
if (!driver->err_handler ||
!driver->err_handler->error_detected)
- return;
+ return 0;
rc = driver->err_handler->error_detected (dev, pci_channel_io_frozen);
/* A driver that needs a reset trumps all others */
if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
if (*res == PCI_ERS_RESULT_NONE) *res = rc;
+
+ return 0;
}
/**
@@ -153,7 +155,7 @@
* Cumulative response passed back in "userdata".
*/
-static void eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
+static int eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
{
enum pci_ers_result rc, *res = userdata;
struct pci_driver *driver = dev->driver;
@@ -161,26 +163,28 @@
if (!driver ||
!driver->err_handler ||
!driver->err_handler->mmio_enabled)
- return;
+ return 0;
rc = driver->err_handler->mmio_enabled (dev);
/* A driver that needs a reset trumps all others */
if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
if (*res == PCI_ERS_RESULT_NONE) *res = rc;
+
+ return 0;
}
/**
* eeh_report_reset - tell device that slot has been reset
*/
-static void eeh_report_reset(struct pci_dev *dev, void *userdata)
+static int eeh_report_reset(struct pci_dev *dev, void *userdata)
{
enum pci_ers_result rc, *res = userdata;
struct pci_driver *driver = dev->driver;
if (!driver)
- return;
+ return 0;
dev->error_state = pci_channel_io_normal;
@@ -188,35 +192,39 @@
if (!driver->err_handler ||
!driver->err_handler->slot_reset)
- return;
+ return 0;
rc = driver->err_handler->slot_reset(dev);
if ((*res == PCI_ERS_RESULT_NONE) ||
(*res == PCI_ERS_RESULT_RECOVERED)) *res = rc;
if (*res == PCI_ERS_RESULT_DISCONNECT &&
rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
+
+ return 0;
}
/**
* eeh_report_resume - tell device to resume normal operations
*/
-static void eeh_report_resume(struct pci_dev *dev, void *userdata)
+static int eeh_report_resume(struct pci_dev *dev, void *userdata)
{
struct pci_driver *driver = dev->driver;
dev->error_state = pci_channel_io_normal;
if (!driver)
- return;
+ return 0;
eeh_enable_irq(dev);
if (!driver->err_handler ||
!driver->err_handler->resume)
- return;
+ return 0;
driver->err_handler->resume(dev);
+
+ return 0;
}
/**
@@ -226,22 +234,24 @@
* dead, and that no further recovery attempts will be made on it.
*/
-static void eeh_report_failure(struct pci_dev *dev, void *userdata)
+static int eeh_report_failure(struct pci_dev *dev, void *userdata)
{
struct pci_driver *driver = dev->driver;
dev->error_state = pci_channel_io_perm_failure;
if (!driver)
- return;
+ return 0;
eeh_disable_irq(dev);
if (!driver->err_handler ||
!driver->err_handler->error_detected)
- return;
+ return 0;
driver->err_handler->error_detected(dev, pci_channel_io_perm_failure);
+
+ return 0;
}
/* ------------------------------------------------------- */
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index b51a1e8..927958d 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -130,6 +130,7 @@
/* generic pci stuff */
#include <asm-generic/pci.h>
+#define PCIBIOS_MAX_MEM_32 0xffffffff
#ifdef CONFIG_NUMA
/* Returns the node based on pci bus */
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index e60fd3e..cb739cc 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -25,7 +25,7 @@
#define PCI_BIOS_IRQ_SCAN 0x2000
#define PCI_ASSIGN_ALL_BUSSES 0x4000
#define PCI_CAN_SKIP_ISA_ALIGN 0x8000
-#define PCI_USE__CRS 0x10000
+#define PCI_NO_ROOT_CRS 0x10000
#define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000
#define PCI_HAS_IO_ECS 0x40000
#define PCI_NOASSIGN_ROMS 0x80000
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index c0ecf25..16c3fda 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -38,15 +38,26 @@
struct acpi_resource_address64 addr;
acpi_status status;
- if (info->res_num >= PCI_BUS_NUM_RESOURCES)
- return AE_OK;
-
status = resource_to_addr(acpi_res, &addr);
if (ACPI_SUCCESS(status))
info->res_num++;
return AE_OK;
}
+static int
+bus_has_transparent_bridge(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ u16 class = dev->class >> 8;
+
+ if (class == PCI_CLASS_BRIDGE_PCI && dev->transparent)
+ return true;
+ }
+ return false;
+}
+
static acpi_status
setup_resource(struct acpi_resource *acpi_res, void *data)
{
@@ -56,9 +67,7 @@
acpi_status status;
unsigned long flags;
struct resource *root;
-
- if (info->res_num >= PCI_BUS_NUM_RESOURCES)
- return AE_OK;
+ int max_root_bus_resources = PCI_BUS_NUM_RESOURCES;
status = resource_to_addr(acpi_res, &addr);
if (!ACPI_SUCCESS(status))
@@ -82,6 +91,18 @@
res->end = res->start + addr.address_length - 1;
res->child = NULL;
+ if (bus_has_transparent_bridge(info->bus))
+ max_root_bus_resources -= 3;
+ if (info->res_num >= max_root_bus_resources) {
+ printk(KERN_WARNING "PCI: Failed to allocate 0x%lx-0x%lx "
+ "from %s for %s due to _CRS returning more than "
+ "%d resource descriptors\n", (unsigned long) res->start,
+ (unsigned long) res->end, root->name, info->name,
+ max_root_bus_resources);
+ info->res_num++;
+ return AE_OK;
+ }
+
if (insert_resource(root, res)) {
printk(KERN_ERR "PCI: Failed to allocate 0x%lx-0x%lx "
"from %s for %s\n", (unsigned long) res->start,
@@ -217,7 +238,7 @@
#endif
}
- if (bus && (pci_probe & PCI_USE__CRS))
+ if (bus && !(pci_probe & PCI_NO_ROOT_CRS))
get_current_resources(device, busnum, domain, bus);
return bus;
}
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index f893d6a..2255f88 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -101,7 +101,7 @@
struct pci_root_info *info;
/* don't go for it if _CRS is used */
- if (pci_probe & PCI_USE__CRS)
+ if (!(pci_probe & PCI_NO_ROOT_CRS))
return;
/* if only one root bus, don't need to anything */
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 2202b62..4740119 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -515,8 +515,8 @@
} else if (!strcmp(str, "assign-busses")) {
pci_probe |= PCI_ASSIGN_ALL_BUSSES;
return NULL;
- } else if (!strcmp(str, "use_crs")) {
- pci_probe |= PCI_USE__CRS;
+ } else if (!strcmp(str, "nocrs")) {
+ pci_probe |= PCI_NO_ROOT_CRS;
return NULL;
} else if (!strcmp(str, "earlydump")) {
pci_early_dump_regs = 1;
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 431f8b4..7ec7d88 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -266,6 +266,7 @@
config ACPI_PCI_SLOT
tristate "PCI slot detection driver"
+ depends on SYSFS
default n
help
This driver creates entries in /sys/bus/pci/slots/ for all PCI
diff --git a/drivers/char/bfin_jtag_comm.c b/drivers/char/bfin_jtag_comm.c
index 44c113d..1d7c34c 100644
--- a/drivers/char/bfin_jtag_comm.c
+++ b/drivers/char/bfin_jtag_comm.c
@@ -8,6 +8,10 @@
* Licensed under the GPL-2 or later.
*/
+#define DRV_NAME "bfin-jtag-comm"
+#define DEV_NAME "ttyBFJC"
+#define pr_fmt(fmt) DRV_NAME ": " fmt
+
#include <linux/circ_buf.h>
#include <linux/console.h>
#include <linux/delay.h>
@@ -22,18 +26,14 @@
#include <linux/tty_flip.h>
#include <asm/atomic.h>
+#define pr_init(fmt, args...) ({ static const __initconst char __fmt[] = fmt; printk(__fmt, ## args); })
+
/* See the Debug/Emulation chapter in the HRM */
#define EMUDOF 0x00000001 /* EMUDAT_OUT full & valid */
#define EMUDIF 0x00000002 /* EMUDAT_IN full & valid */
#define EMUDOOVF 0x00000004 /* EMUDAT_OUT overflow */
#define EMUDIOVF 0x00000008 /* EMUDAT_IN overflow */
-#define DRV_NAME "bfin-jtag-comm"
-#define DEV_NAME "ttyBFJC"
-
-#define pr_init(fmt, args...) ({ static const __initdata char __fmt[] = fmt; printk(__fmt, ## args); })
-#define debug(fmt, args...) pr_debug(DRV_NAME ": " fmt, ## args)
-
static inline uint32_t bfin_write_emudat(uint32_t emudat)
{
__asm__ __volatile__("emudat = %0;" : : "d"(emudat));
@@ -74,7 +74,7 @@
while (!kthread_should_stop()) {
/* no one left to give data to, so sleep */
if (bfin_jc_tty == NULL && circ_empty(&bfin_jc_write_buf)) {
- debug("waiting for readers\n");
+ pr_debug("waiting for readers\n");
__set_current_state(TASK_UNINTERRUPTIBLE);
schedule();
__set_current_state(TASK_RUNNING);
@@ -82,7 +82,7 @@
/* no data available, so just chill */
if (!(bfin_read_DBGSTAT() & EMUDIF) && circ_empty(&bfin_jc_write_buf)) {
- debug("waiting for data (in_len = %i) (circ: %i %i)\n",
+ pr_debug("waiting for data (in_len = %i) (circ: %i %i)\n",
inbound_len, bfin_jc_write_buf.tail, bfin_jc_write_buf.head);
if (inbound_len)
schedule();
@@ -99,11 +99,11 @@
if (tty != NULL) {
uint32_t emudat = bfin_read_emudat();
if (inbound_len == 0) {
- debug("incoming length: 0x%08x\n", emudat);
+ pr_debug("incoming length: 0x%08x\n", emudat);
inbound_len = emudat;
} else {
size_t num_chars = (4 <= inbound_len ? 4 : inbound_len);
- debug(" incoming data: 0x%08x (pushing %zu)\n", emudat, num_chars);
+ pr_debug(" incoming data: 0x%08x (pushing %zu)\n", emudat, num_chars);
inbound_len -= num_chars;
tty_insert_flip_string(tty, (unsigned char *)&emudat, num_chars);
tty_flip_buffer_push(tty);
@@ -117,7 +117,7 @@
if (outbound_len == 0) {
outbound_len = circ_cnt(&bfin_jc_write_buf);
bfin_write_emudat(outbound_len);
- debug("outgoing length: 0x%08x\n", outbound_len);
+ pr_debug("outgoing length: 0x%08x\n", outbound_len);
} else {
struct tty_struct *tty;
int tail = bfin_jc_write_buf.tail;
@@ -136,7 +136,7 @@
if (tty)
tty_wakeup(tty);
mutex_unlock(&bfin_jc_tty_mutex);
- debug(" outgoing data: 0x%08x (pushing %zu)\n", emudat, ate);
+ pr_debug(" outgoing data: 0x%08x (pushing %zu)\n", emudat, ate);
}
}
}
@@ -149,7 +149,7 @@
bfin_jc_open(struct tty_struct *tty, struct file *filp)
{
mutex_lock(&bfin_jc_tty_mutex);
- debug("open %lu\n", bfin_jc_count);
+ pr_debug("open %lu\n", bfin_jc_count);
++bfin_jc_count;
bfin_jc_tty = tty;
wake_up_process(bfin_jc_kthread);
@@ -161,7 +161,7 @@
bfin_jc_close(struct tty_struct *tty, struct file *filp)
{
mutex_lock(&bfin_jc_tty_mutex);
- debug("close %lu\n", bfin_jc_count);
+ pr_debug("close %lu\n", bfin_jc_count);
if (--bfin_jc_count == 0)
bfin_jc_tty = NULL;
wake_up_process(bfin_jc_kthread);
@@ -174,7 +174,7 @@
{
int i;
count = min(count, circ_free(&bfin_jc_write_buf));
- debug("going to write chunk of %i bytes\n", count);
+ pr_debug("going to write chunk of %i bytes\n", count);
for (i = 0; i < count; ++i)
circ_byte(&bfin_jc_write_buf, bfin_jc_write_buf.head + i) = buf[i];
bfin_jc_write_buf.head += i;
diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index 6799588..65b6ff2 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -1189,11 +1189,6 @@
return -ENODEV;
}
- if (port % MAX_PORTS_PER_BOARD >= brd->numPorts) {
- retval = -ENODEV;
- goto out_unlock;
- }
-
ch = &brd->ports[port % MAX_PORTS_PER_BOARD];
ch->port.count++;
tty->driver_data = ch;
@@ -1218,8 +1213,8 @@
moxa_close_port(tty);
} else
ch->port.flags |= ASYNC_NORMAL_ACTIVE;
-out_unlock:
mutex_unlock(&moxa_openlock);
+
return retval;
}
diff --git a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c
index 461ece5..1c43c8c 100644
--- a/drivers/char/n_hdlc.c
+++ b/drivers/char/n_hdlc.c
@@ -10,7 +10,6 @@
* Paul Mackerras <Paul.Mackerras@cs.anu.edu.au>
*
* Original release 01/11/99
- * $Id: n_hdlc.c,v 4.8 2003/05/06 21:18:51 paulkf Exp $
*
* This code is released under the GNU General Public License (GPL)
*
@@ -79,7 +78,6 @@
*/
#define HDLC_MAGIC 0x239e
-#define HDLC_VERSION "$Revision: 4.8 $"
#include <linux/module.h>
#include <linux/init.h>
@@ -114,7 +112,7 @@
#define MAX_HDLC_FRAME_SIZE 65535
#define DEFAULT_RX_BUF_COUNT 10
#define MAX_RX_BUF_COUNT 60
-#define DEFAULT_TX_BUF_COUNT 1
+#define DEFAULT_TX_BUF_COUNT 3
struct n_hdlc_buf {
struct n_hdlc_buf *link;
@@ -199,6 +197,31 @@
#define tty2n_hdlc(tty) ((struct n_hdlc *) ((tty)->disc_data))
#define n_hdlc2tty(n_hdlc) ((n_hdlc)->tty)
+static void flush_rx_queue(struct tty_struct *tty)
+{
+ struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
+ struct n_hdlc_buf *buf;
+
+ while ((buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list)))
+ n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, buf);
+}
+
+static void flush_tx_queue(struct tty_struct *tty)
+{
+ struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
+ struct n_hdlc_buf *buf;
+ unsigned long flags;
+
+ while ((buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list)))
+ n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, buf);
+ spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
+ if (n_hdlc->tbuf) {
+ n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, n_hdlc->tbuf);
+ n_hdlc->tbuf = NULL;
+ }
+ spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
+}
+
static struct tty_ldisc_ops n_hdlc_ldisc = {
.owner = THIS_MODULE,
.magic = TTY_LDISC_MAGIC,
@@ -211,6 +234,7 @@
.poll = n_hdlc_tty_poll,
.receive_buf = n_hdlc_tty_receive,
.write_wakeup = n_hdlc_tty_wakeup,
+ .flush_buffer = flush_rx_queue,
};
/**
@@ -341,10 +365,7 @@
set_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
#endif
- /* Flush any pending characters in the driver and discipline. */
- if (tty->ldisc->ops->flush_buffer)
- tty->ldisc->ops->flush_buffer(tty);
-
+ /* flush receive data from driver */
tty_driver_flush_buffer(tty);
if (debuglevel >= DEBUG_LEVEL_INFO)
@@ -763,6 +784,14 @@
error = put_user(count, (int __user *)arg);
break;
+ case TCFLSH:
+ switch (arg) {
+ case TCIOFLUSH:
+ case TCOFLUSH:
+ flush_tx_queue(tty);
+ }
+ /* fall through to default */
+
default:
error = n_tty_ioctl_helper(tty, file, cmd, arg);
break;
@@ -919,8 +948,7 @@
} /* end of n_hdlc_buf_get() */
static char hdlc_banner[] __initdata =
- KERN_INFO "HDLC line discipline: version " HDLC_VERSION
- ", maxframe=%u\n";
+ KERN_INFO "HDLC line discipline maxframe=%u\n";
static char hdlc_register_ok[] __initdata =
KERN_INFO "N_HDLC line discipline registered.\n";
static char hdlc_register_fail[] __initdata =
diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
index d2e93e3..2e99158 100644
--- a/drivers/char/n_r3964.c
+++ b/drivers/char/n_r3964.c
@@ -1062,7 +1062,7 @@
struct r3964_client_info *pClient;
struct r3964_message *pMsg;
struct r3964_client_message theMsg;
- int count;
+ int ret;
TRACE_L("read()");
@@ -1074,8 +1074,8 @@
if (pMsg == NULL) {
/* no messages available. */
if (file->f_flags & O_NONBLOCK) {
- unlock_kernel();
- return -EAGAIN;
+ ret = -EAGAIN;
+ goto unlock;
}
/* block until there is a message: */
wait_event_interruptible(pInfo->read_wait,
@@ -1085,29 +1085,31 @@
/* If we still haven't got a message, we must have been signalled */
if (!pMsg) {
- unlock_kernel();
- return -EINTR;
+ ret = -EINTR;
+ goto unlock;
}
/* deliver msg to client process: */
theMsg.msg_id = pMsg->msg_id;
theMsg.arg = pMsg->arg;
theMsg.error_code = pMsg->error_code;
- count = sizeof(struct r3964_client_message);
+ ret = sizeof(struct r3964_client_message);
kfree(pMsg);
TRACE_M("r3964_read - msg kfree %p", pMsg);
- if (copy_to_user(buf, &theMsg, count)) {
- unlock_kernel();
- return -EFAULT;
+ if (copy_to_user(buf, &theMsg, ret)) {
+ ret = -EFAULT;
+ goto unlock;
}
- TRACE_PS("read - return %d", count);
- return count;
+ TRACE_PS("read - return %d", ret);
+ goto unlock;
}
+ ret = -EPERM;
+unlock:
unlock_kernel();
- return -EPERM;
+ return ret;
}
static ssize_t r3964_write(struct tty_struct *tty, struct file *file,
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index dbb9125..881934c 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -1575,7 +1575,8 @@
clear_bit(LOCK_IO, &dev->flags);
wake_up_interruptible(&dev->ioq);
- return 0;
+ rc = 0;
+ break;
case CM_IOCSPTS:
{
struct ptsreq krnptsreq;
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index e6ce632..7539bed 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -396,7 +396,8 @@
kbd = kbd_table + console;
switch (cmd) {
case TIOCLINUX:
- return tioclinux(tty, arg);
+ ret = tioclinux(tty, arg);
+ break;
case KIOCSOUND:
if (!perm)
goto eperm;
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index b4bb06f..f703758 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -65,7 +65,7 @@
#define TX_CQ_LEN 1024
#define RX_Q_LEN 1024 /* Does not support any other value */
#define RX_CQ_LEN 1024
-#define MCC_Q_LEN 64 /* total size not to exceed 8 pages */
+#define MCC_Q_LEN 128 /* total size not to exceed 8 pages */
#define MCC_CQ_LEN 256
#define BE_NAPI_WEIGHT 64
@@ -91,6 +91,61 @@
atomic_t used; /* Number of valid elements in the queue */
};
+static inline u32 MODULO(u16 val, u16 limit)
+{
+ BUG_ON(limit & (limit - 1));
+ return val & (limit - 1);
+}
+
+static inline void index_adv(u16 *index, u16 val, u16 limit)
+{
+ *index = MODULO((*index + val), limit);
+}
+
+static inline void index_inc(u16 *index, u16 limit)
+{
+ *index = MODULO((*index + 1), limit);
+}
+
+static inline void *queue_head_node(struct be_queue_info *q)
+{
+ return q->dma_mem.va + q->head * q->entry_size;
+}
+
+static inline void *queue_tail_node(struct be_queue_info *q)
+{
+ return q->dma_mem.va + q->tail * q->entry_size;
+}
+
+static inline void queue_head_inc(struct be_queue_info *q)
+{
+ index_inc(&q->head, q->len);
+}
+
+static inline void queue_tail_inc(struct be_queue_info *q)
+{
+ index_inc(&q->tail, q->len);
+}
+
+
+struct be_eq_obj {
+ struct be_queue_info q;
+ char desc[32];
+
+ /* Adaptive interrupt coalescing (AIC) info */
+ bool enable_aic;
+ u16 min_eqd; /* in usecs */
+ u16 max_eqd; /* in usecs */
+ u16 cur_eqd; /* in usecs */
+
+ struct napi_struct napi;
+};
+
+struct be_mcc_obj {
+ struct be_queue_info q;
+ struct be_queue_info cq;
+};
+
struct be_ctrl_info {
u8 __iomem *csr;
u8 __iomem *db; /* Door Bell */
@@ -98,11 +153,20 @@
int pci_func;
/* Mbox used for cmd request/response */
- spinlock_t cmd_lock; /* For serializing cmds to BE card */
+ spinlock_t mbox_lock; /* For serializing mbox cmds to BE card */
struct be_dma_mem mbox_mem;
/* Mbox mem is adjusted to align to 16 bytes. The allocated addr
* is stored for freeing purpose */
struct be_dma_mem mbox_mem_alloced;
+
+ /* MCC Rings */
+ struct be_mcc_obj mcc_obj;
+ spinlock_t mcc_lock; /* For serializing mcc cmds to BE card */
+ spinlock_t mcc_cq_lock;
+
+ /* MCC Async callback */
+ void (*async_cb)(void *adapter, bool link_up);
+ void *adapter_ctxt;
};
#include "be_cmds.h"
@@ -150,19 +214,6 @@
struct be_dma_mem cmd;
};
-struct be_eq_obj {
- struct be_queue_info q;
- char desc[32];
-
- /* Adaptive interrupt coalescing (AIC) info */
- bool enable_aic;
- u16 min_eqd; /* in usecs */
- u16 max_eqd; /* in usecs */
- u16 cur_eqd; /* in usecs */
-
- struct napi_struct napi;
-};
-
struct be_tx_obj {
struct be_queue_info q;
struct be_queue_info cq;
@@ -225,8 +276,9 @@
u32 if_handle; /* Used to configure filtering */
u32 pmac_id; /* MAC addr handle used by BE card */
- struct be_link_info link;
+ bool link_up;
u32 port_num;
+ bool promiscuous;
};
extern struct ethtool_ops be_ethtool_ops;
@@ -235,22 +287,6 @@
#define BE_SET_NETDEV_OPS(netdev, ops) (netdev->netdev_ops = ops)
-static inline u32 MODULO(u16 val, u16 limit)
-{
- BUG_ON(limit & (limit - 1));
- return val & (limit - 1);
-}
-
-static inline void index_adv(u16 *index, u16 val, u16 limit)
-{
- *index = MODULO((*index + val), limit);
-}
-
-static inline void index_inc(u16 *index, u16 limit)
-{
- *index = MODULO((*index + 1), limit);
-}
-
#define PAGE_SHIFT_4K 12
#define PAGE_SIZE_4K (1 << PAGE_SHIFT_4K)
@@ -339,4 +375,6 @@
return val;
}
+extern void be_cq_notify(struct be_ctrl_info *ctrl, u16 qid, bool arm,
+ u16 num_popped);
#endif /* BE_H */
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index d444aed..583517e 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -17,6 +17,133 @@
#include "be.h"
+static void be_mcc_notify(struct be_ctrl_info *ctrl)
+{
+ struct be_queue_info *mccq = &ctrl->mcc_obj.q;
+ u32 val = 0;
+
+ val |= mccq->id & DB_MCCQ_RING_ID_MASK;
+ val |= 1 << DB_MCCQ_NUM_POSTED_SHIFT;
+ iowrite32(val, ctrl->db + DB_MCCQ_OFFSET);
+}
+
+/* To check if valid bit is set, check the entire word as we don't know
+ * the endianness of the data (old entry is host endian while a new entry is
+ * little endian) */
+static inline bool be_mcc_compl_is_new(struct be_mcc_cq_entry *compl)
+{
+ if (compl->flags != 0) {
+ compl->flags = le32_to_cpu(compl->flags);
+ BUG_ON((compl->flags & CQE_FLAGS_VALID_MASK) == 0);
+ return true;
+ } else {
+ return false;
+ }
+}
+
+/* Need to reset the entire word that houses the valid bit */
+static inline void be_mcc_compl_use(struct be_mcc_cq_entry *compl)
+{
+ compl->flags = 0;
+}
+
+static int be_mcc_compl_process(struct be_ctrl_info *ctrl,
+ struct be_mcc_cq_entry *compl)
+{
+ u16 compl_status, extd_status;
+
+ /* Just swap the status to host endian; mcc tag is opaquely copied
+ * from mcc_wrb */
+ be_dws_le_to_cpu(compl, 4);
+
+ compl_status = (compl->status >> CQE_STATUS_COMPL_SHIFT) &
+ CQE_STATUS_COMPL_MASK;
+ if (compl_status != MCC_STATUS_SUCCESS) {
+ extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) &
+ CQE_STATUS_EXTD_MASK;
+ printk(KERN_WARNING DRV_NAME
+ " error in cmd completion: status(compl/extd)=%d/%d\n",
+ compl_status, extd_status);
+ return -1;
+ }
+ return 0;
+}
+
+/* Link state evt is a string of bytes; no need for endian swapping */
+static void be_async_link_state_process(struct be_ctrl_info *ctrl,
+ struct be_async_event_link_state *evt)
+{
+ ctrl->async_cb(ctrl->adapter_ctxt,
+ evt->port_link_status == ASYNC_EVENT_LINK_UP ? true : false);
+}
+
+static inline bool is_link_state_evt(u32 trailer)
+{
+ return (((trailer >> ASYNC_TRAILER_EVENT_CODE_SHIFT) &
+ ASYNC_TRAILER_EVENT_CODE_MASK) ==
+ ASYNC_EVENT_CODE_LINK_STATE);
+}
+
+static struct be_mcc_cq_entry *be_mcc_compl_get(struct be_ctrl_info *ctrl)
+{
+ struct be_queue_info *mcc_cq = &ctrl->mcc_obj.cq;
+ struct be_mcc_cq_entry *compl = queue_tail_node(mcc_cq);
+
+ if (be_mcc_compl_is_new(compl)) {
+ queue_tail_inc(mcc_cq);
+ return compl;
+ }
+ return NULL;
+}
+
+void be_process_mcc(struct be_ctrl_info *ctrl)
+{
+ struct be_mcc_cq_entry *compl;
+ int num = 0;
+
+ spin_lock_bh(&ctrl->mcc_cq_lock);
+ while ((compl = be_mcc_compl_get(ctrl))) {
+ if (compl->flags & CQE_FLAGS_ASYNC_MASK) {
+ /* Interpret flags as an async trailer */
+ BUG_ON(!is_link_state_evt(compl->flags));
+
+ /* Interpret compl as a async link evt */
+ be_async_link_state_process(ctrl,
+ (struct be_async_event_link_state *) compl);
+ } else {
+ be_mcc_compl_process(ctrl, compl);
+ atomic_dec(&ctrl->mcc_obj.q.used);
+ }
+ be_mcc_compl_use(compl);
+ num++;
+ }
+ if (num)
+ be_cq_notify(ctrl, ctrl->mcc_obj.cq.id, true, num);
+ spin_unlock_bh(&ctrl->mcc_cq_lock);
+}
+
+/* Wait till no more pending mcc requests are present */
+static void be_mcc_wait_compl(struct be_ctrl_info *ctrl)
+{
+#define mcc_timeout 50000 /* 5s timeout */
+ int i;
+ for (i = 0; i < mcc_timeout; i++) {
+ be_process_mcc(ctrl);
+ if (atomic_read(&ctrl->mcc_obj.q.used) == 0)
+ break;
+ udelay(100);
+ }
+ if (i == mcc_timeout)
+ printk(KERN_WARNING DRV_NAME "mcc poll timed out\n");
+}
+
+/* Notify MCC requests and wait for completion */
+static void be_mcc_notify_wait(struct be_ctrl_info *ctrl)
+{
+ be_mcc_notify(ctrl);
+ be_mcc_wait_compl(ctrl);
+}
+
static int be_mbox_db_ready_wait(void __iomem *db)
{
int cnt = 0, wait = 5;
@@ -44,11 +171,11 @@
/*
* Insert the mailbox address into the doorbell in two steps
+ * Polls on the mbox doorbell till a command completion (or a timeout) occurs
*/
static int be_mbox_db_ring(struct be_ctrl_info *ctrl)
{
int status;
- u16 compl_status, extd_status;
u32 val = 0;
void __iomem *db = ctrl->db + MPU_MAILBOX_DB_OFFSET;
struct be_dma_mem *mbox_mem = &ctrl->mbox_mem;
@@ -79,24 +206,17 @@
if (status != 0)
return status;
- /* compl entry has been made now */
- be_dws_le_to_cpu(cqe, sizeof(*cqe));
- if (!(cqe->flags & CQE_FLAGS_VALID_MASK)) {
- printk(KERN_WARNING DRV_NAME ": ERROR invalid mbox compl\n");
+ /* A cq entry has been made now */
+ if (be_mcc_compl_is_new(cqe)) {
+ status = be_mcc_compl_process(ctrl, &mbox->cqe);
+ be_mcc_compl_use(cqe);
+ if (status)
+ return status;
+ } else {
+ printk(KERN_WARNING DRV_NAME "invalid mailbox completion\n");
return -1;
}
-
- compl_status = (cqe->status >> CQE_STATUS_COMPL_SHIFT) &
- CQE_STATUS_COMPL_MASK;
- if (compl_status != MCC_STATUS_SUCCESS) {
- extd_status = (cqe->status >> CQE_STATUS_EXTD_SHIFT) &
- CQE_STATUS_EXTD_MASK;
- printk(KERN_WARNING DRV_NAME
- ": ERROR in cmd compl. status(compl/extd)=%d/%d\n",
- compl_status, extd_status);
- }
-
- return compl_status;
+ return 0;
}
static int be_POST_stage_get(struct be_ctrl_info *ctrl, u16 *stage)
@@ -235,6 +355,18 @@
return &((struct be_mcc_mailbox *)(mbox_mem->va))->wrb;
}
+static inline struct be_mcc_wrb *wrb_from_mcc(struct be_queue_info *mccq)
+{
+ struct be_mcc_wrb *wrb = NULL;
+ if (atomic_read(&mccq->used) < mccq->len) {
+ wrb = queue_head_node(mccq);
+ queue_head_inc(mccq);
+ atomic_inc(&mccq->used);
+ memset(wrb, 0, sizeof(*wrb));
+ }
+ return wrb;
+}
+
int be_cmd_eq_create(struct be_ctrl_info *ctrl,
struct be_queue_info *eq, int eq_delay)
{
@@ -244,7 +376,7 @@
struct be_dma_mem *q_mem = &eq->dma_mem;
int status;
- spin_lock(&ctrl->cmd_lock);
+ spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -272,7 +404,7 @@
eq->id = le16_to_cpu(resp->eq_id);
eq->created = true;
}
- spin_unlock(&ctrl->cmd_lock);
+ spin_unlock(&ctrl->mbox_lock);
return status;
}
@@ -284,7 +416,7 @@
struct be_cmd_resp_mac_query *resp = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->cmd_lock);
+ spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -304,7 +436,7 @@
if (!status)
memcpy(mac_addr, resp->mac.addr, ETH_ALEN);
- spin_unlock(&ctrl->cmd_lock);
+ spin_unlock(&ctrl->mbox_lock);
return status;
}
@@ -315,7 +447,7 @@
struct be_cmd_req_pmac_add *req = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->cmd_lock);
+ spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -332,7 +464,7 @@
*pmac_id = le32_to_cpu(resp->pmac_id);
}
- spin_unlock(&ctrl->cmd_lock);
+ spin_unlock(&ctrl->mbox_lock);
return status;
}
@@ -342,7 +474,7 @@
struct be_cmd_req_pmac_del *req = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->cmd_lock);
+ spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -354,7 +486,7 @@
req->pmac_id = cpu_to_le32(pmac_id);
status = be_mbox_db_ring(ctrl);
- spin_unlock(&ctrl->cmd_lock);
+ spin_unlock(&ctrl->mbox_lock);
return status;
}
@@ -370,7 +502,7 @@
void *ctxt = &req->context;
int status;
- spin_lock(&ctrl->cmd_lock);
+ spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -388,7 +520,7 @@
AMAP_SET_BITS(struct amap_cq_context, solevent, ctxt, sol_evts);
AMAP_SET_BITS(struct amap_cq_context, eventable, ctxt, 1);
AMAP_SET_BITS(struct amap_cq_context, eqid, ctxt, eq->id);
- AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 0);
+ AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 1);
AMAP_SET_BITS(struct amap_cq_context, func, ctxt, ctrl->pci_func);
be_dws_cpu_to_le(ctxt, sizeof(req->context));
@@ -399,7 +531,56 @@
cq->id = le16_to_cpu(resp->cq_id);
cq->created = true;
}
- spin_unlock(&ctrl->cmd_lock);
+ spin_unlock(&ctrl->mbox_lock);
+
+ return status;
+}
+
+static u32 be_encoded_q_len(int q_len)
+{
+ u32 len_encoded = fls(q_len); /* log2(len) + 1 */
+ if (len_encoded == 16)
+ len_encoded = 0;
+ return len_encoded;
+}
+
+int be_cmd_mccq_create(struct be_ctrl_info *ctrl,
+ struct be_queue_info *mccq,
+ struct be_queue_info *cq)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_mcc_create *req = embedded_payload(wrb);
+ struct be_dma_mem *q_mem = &mccq->dma_mem;
+ void *ctxt = &req->context;
+ int status;
+
+ spin_lock(&ctrl->mbox_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_MCC_CREATE, sizeof(*req));
+
+ req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size);
+
+ AMAP_SET_BITS(struct amap_mcc_context, fid, ctxt, ctrl->pci_func);
+ AMAP_SET_BITS(struct amap_mcc_context, valid, ctxt, 1);
+ AMAP_SET_BITS(struct amap_mcc_context, ring_size, ctxt,
+ be_encoded_q_len(mccq->len));
+ AMAP_SET_BITS(struct amap_mcc_context, cq_id, ctxt, cq->id);
+
+ be_dws_cpu_to_le(ctxt, sizeof(req->context));
+
+ be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+
+ status = be_mbox_db_ring(ctrl);
+ if (!status) {
+ struct be_cmd_resp_mcc_create *resp = embedded_payload(wrb);
+ mccq->id = le16_to_cpu(resp->id);
+ mccq->created = true;
+ }
+ spin_unlock(&ctrl->mbox_lock);
return status;
}
@@ -415,7 +596,7 @@
int status;
u32 len_encoded;
- spin_lock(&ctrl->cmd_lock);
+ spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -446,7 +627,7 @@
txq->id = le16_to_cpu(resp->cid);
txq->created = true;
}
- spin_unlock(&ctrl->cmd_lock);
+ spin_unlock(&ctrl->mbox_lock);
return status;
}
@@ -460,7 +641,7 @@
struct be_dma_mem *q_mem = &rxq->dma_mem;
int status;
- spin_lock(&ctrl->cmd_lock);
+ spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -482,7 +663,7 @@
rxq->id = le16_to_cpu(resp->id);
rxq->created = true;
}
- spin_unlock(&ctrl->cmd_lock);
+ spin_unlock(&ctrl->mbox_lock);
return status;
}
@@ -496,7 +677,7 @@
u8 subsys = 0, opcode = 0;
int status;
- spin_lock(&ctrl->cmd_lock);
+ spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -518,6 +699,10 @@
subsys = CMD_SUBSYSTEM_ETH;
opcode = OPCODE_ETH_RX_DESTROY;
break;
+ case QTYPE_MCCQ:
+ subsys = CMD_SUBSYSTEM_COMMON;
+ opcode = OPCODE_COMMON_MCC_DESTROY;
+ break;
default:
printk(KERN_WARNING DRV_NAME ":bad Q type in Q destroy cmd\n");
status = -1;
@@ -528,7 +713,7 @@
status = be_mbox_db_ring(ctrl);
err:
- spin_unlock(&ctrl->cmd_lock);
+ spin_unlock(&ctrl->mbox_lock);
return status;
}
@@ -541,7 +726,7 @@
struct be_cmd_req_if_create *req = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->cmd_lock);
+ spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -562,7 +747,7 @@
*pmac_id = le32_to_cpu(resp->pmac_id);
}
- spin_unlock(&ctrl->cmd_lock);
+ spin_unlock(&ctrl->mbox_lock);
return status;
}
@@ -572,7 +757,7 @@
struct be_cmd_req_if_destroy *req = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->cmd_lock);
+ spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -583,7 +768,7 @@
req->interface_id = cpu_to_le32(interface_id);
status = be_mbox_db_ring(ctrl);
- spin_unlock(&ctrl->cmd_lock);
+ spin_unlock(&ctrl->mbox_lock);
return status;
}
@@ -598,7 +783,7 @@
struct be_sge *sge = nonembedded_sgl(wrb);
int status;
- spin_lock(&ctrl->cmd_lock);
+ spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
memset(req, 0, sizeof(*req));
@@ -617,18 +802,20 @@
be_dws_le_to_cpu(&resp->hw_stats, sizeof(resp->hw_stats));
}
- spin_unlock(&ctrl->cmd_lock);
+ spin_unlock(&ctrl->mbox_lock);
return status;
}
int be_cmd_link_status_query(struct be_ctrl_info *ctrl,
- struct be_link_info *link)
+ bool *link_up)
{
struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
struct be_cmd_req_link_status *req = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->cmd_lock);
+ spin_lock(&ctrl->mbox_lock);
+
+ *link_up = false;
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -639,14 +826,11 @@
status = be_mbox_db_ring(ctrl);
if (!status) {
struct be_cmd_resp_link_status *resp = embedded_payload(wrb);
- link->speed = resp->mac_speed;
- link->duplex = resp->mac_duplex;
- link->fault = resp->mac_fault;
- } else {
- link->speed = PHY_LINK_SPEED_ZERO;
+ if (resp->mac_speed != PHY_LINK_SPEED_ZERO)
+ *link_up = true;
}
- spin_unlock(&ctrl->cmd_lock);
+ spin_unlock(&ctrl->mbox_lock);
return status;
}
@@ -656,7 +840,7 @@
struct be_cmd_req_get_fw_version *req = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->cmd_lock);
+ spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -670,7 +854,7 @@
strncpy(fw_ver, resp->firmware_version_string, FW_VER_LEN);
}
- spin_unlock(&ctrl->cmd_lock);
+ spin_unlock(&ctrl->mbox_lock);
return status;
}
@@ -681,7 +865,7 @@
struct be_cmd_req_modify_eq_delay *req = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->cmd_lock);
+ spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -696,7 +880,7 @@
status = be_mbox_db_ring(ctrl);
- spin_unlock(&ctrl->cmd_lock);
+ spin_unlock(&ctrl->mbox_lock);
return status;
}
@@ -707,7 +891,7 @@
struct be_cmd_req_vlan_config *req = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->cmd_lock);
+ spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -726,18 +910,22 @@
status = be_mbox_db_ring(ctrl);
- spin_unlock(&ctrl->cmd_lock);
+ spin_unlock(&ctrl->mbox_lock);
return status;
}
+/* Use MCC for this command as it may be called in BH context */
int be_cmd_promiscuous_config(struct be_ctrl_info *ctrl, u8 port_num, bool en)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
- struct be_cmd_req_promiscuous_config *req = embedded_payload(wrb);
- int status;
+ struct be_mcc_wrb *wrb;
+ struct be_cmd_req_promiscuous_config *req;
- spin_lock(&ctrl->cmd_lock);
- memset(wrb, 0, sizeof(*wrb));
+ spin_lock_bh(&ctrl->mcc_lock);
+
+ wrb = wrb_from_mcc(&ctrl->mcc_obj.q);
+ BUG_ON(!wrb);
+
+ req = embedded_payload(wrb);
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -749,21 +937,29 @@
else
req->port0_promiscuous = en;
- status = be_mbox_db_ring(ctrl);
+ be_mcc_notify_wait(ctrl);
- spin_unlock(&ctrl->cmd_lock);
- return status;
+ spin_unlock_bh(&ctrl->mcc_lock);
+ return 0;
}
-int be_cmd_mcast_mac_set(struct be_ctrl_info *ctrl, u32 if_id, u8 *mac_table,
- u32 num, bool promiscuous)
+/*
+ * Use MCC for this command as it may be called in BH context
+ * (mc == NULL) => multicast promiscous
+ */
+int be_cmd_multicast_set(struct be_ctrl_info *ctrl, u32 if_id,
+ struct dev_mc_list *mc_list, u32 mc_count)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
- struct be_cmd_req_mcast_mac_config *req = embedded_payload(wrb);
- int status;
+#define BE_MAX_MC 32 /* set mcast promisc if > 32 */
+ struct be_mcc_wrb *wrb;
+ struct be_cmd_req_mcast_mac_config *req;
- spin_lock(&ctrl->cmd_lock);
- memset(wrb, 0, sizeof(*wrb));
+ spin_lock_bh(&ctrl->mcc_lock);
+
+ wrb = wrb_from_mcc(&ctrl->mcc_obj.q);
+ BUG_ON(!wrb);
+
+ req = embedded_payload(wrb);
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -771,17 +967,23 @@
OPCODE_COMMON_NTWK_MULTICAST_SET, sizeof(*req));
req->interface_id = if_id;
- req->promiscuous = promiscuous;
- if (!promiscuous) {
- req->num_mac = cpu_to_le16(num);
- if (num)
- memcpy(req->mac, mac_table, ETH_ALEN * num);
+ if (mc_list && mc_count <= BE_MAX_MC) {
+ int i;
+ struct dev_mc_list *mc;
+
+ req->num_mac = cpu_to_le16(mc_count);
+
+ for (mc = mc_list, i = 0; mc; mc = mc->next, i++)
+ memcpy(req->mac[i].byte, mc->dmi_addr, ETH_ALEN);
+ } else {
+ req->promiscuous = 1;
}
- status = be_mbox_db_ring(ctrl);
+ be_mcc_notify_wait(ctrl);
- spin_unlock(&ctrl->cmd_lock);
- return status;
+ spin_unlock_bh(&ctrl->mcc_lock);
+
+ return 0;
}
int be_cmd_set_flow_control(struct be_ctrl_info *ctrl, u32 tx_fc, u32 rx_fc)
@@ -790,7 +992,7 @@
struct be_cmd_req_set_flow_control *req = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->cmd_lock);
+ spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
@@ -804,7 +1006,7 @@
status = be_mbox_db_ring(ctrl);
- spin_unlock(&ctrl->cmd_lock);
+ spin_unlock(&ctrl->mbox_lock);
return status;
}
@@ -814,7 +1016,7 @@
struct be_cmd_req_get_flow_control *req = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->cmd_lock);
+ spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
@@ -831,7 +1033,7 @@
*rx_fc = le16_to_cpu(resp->rx_flow_control);
}
- spin_unlock(&ctrl->cmd_lock);
+ spin_unlock(&ctrl->mbox_lock);
return status;
}
@@ -841,7 +1043,7 @@
struct be_cmd_req_query_fw_cfg *req = embedded_payload(wrb);
int status;
- spin_lock(&ctrl->cmd_lock);
+ spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
@@ -856,6 +1058,6 @@
*port_num = le32_to_cpu(resp->phys_port);
}
- spin_unlock(&ctrl->cmd_lock);
+ spin_unlock(&ctrl->mbox_lock);
return status;
}
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index e499e2d..747626d 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -76,6 +76,34 @@
u32 flags; /* dword 3 */
};
+/* When the async bit of mcc_compl is set, the last 4 bytes of
+ * mcc_compl is interpreted as follows:
+ */
+#define ASYNC_TRAILER_EVENT_CODE_SHIFT 8 /* bits 8 - 15 */
+#define ASYNC_TRAILER_EVENT_CODE_MASK 0xFF
+#define ASYNC_EVENT_CODE_LINK_STATE 0x1
+struct be_async_event_trailer {
+ u32 code;
+};
+
+enum {
+ ASYNC_EVENT_LINK_DOWN = 0x0,
+ ASYNC_EVENT_LINK_UP = 0x1
+};
+
+/* When the event code of an async trailer is link-state, the mcc_compl
+ * must be interpreted as follows
+ */
+struct be_async_event_link_state {
+ u8 physical_port;
+ u8 port_link_status;
+ u8 port_duplex;
+ u8 port_speed;
+ u8 port_fault;
+ u8 rsvd0[7];
+ struct be_async_event_trailer trailer;
+} __packed;
+
struct be_mcc_mailbox {
struct be_mcc_wrb wrb;
struct be_mcc_cq_entry cqe;
@@ -101,6 +129,7 @@
#define OPCODE_COMMON_FIRMWARE_CONFIG 42
#define OPCODE_COMMON_NTWK_INTERFACE_CREATE 50
#define OPCODE_COMMON_NTWK_INTERFACE_DESTROY 51
+#define OPCODE_COMMON_MCC_DESTROY 53
#define OPCODE_COMMON_CQ_DESTROY 54
#define OPCODE_COMMON_EQ_DESTROY 55
#define OPCODE_COMMON_QUERY_FIRMWARE_CONFIG 58
@@ -269,6 +298,38 @@
u16 rsvd0;
} __packed;
+/******************** Create MCCQ ***************************/
+/* Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field */
+struct amap_mcc_context {
+ u8 con_index[14];
+ u8 rsvd0[2];
+ u8 ring_size[4];
+ u8 fetch_wrb;
+ u8 fetch_r2t;
+ u8 cq_id[10];
+ u8 prod_index[14];
+ u8 fid[8];
+ u8 pdid[9];
+ u8 valid;
+ u8 rsvd1[32];
+ u8 rsvd2[32];
+} __packed;
+
+struct be_cmd_req_mcc_create {
+ struct be_cmd_req_hdr hdr;
+ u16 num_pages;
+ u16 rsvd0;
+ u8 context[sizeof(struct amap_mcc_context) / 8];
+ struct phys_addr pages[8];
+} __packed;
+
+struct be_cmd_resp_mcc_create {
+ struct be_cmd_resp_hdr hdr;
+ u16 id;
+ u16 rsvd0;
+} __packed;
+
/******************** Create TxQ ***************************/
#define BE_ETH_TX_RING_TYPE_STANDARD 2
#define BE_ULP1_NUM 1
@@ -341,7 +402,8 @@
QTYPE_EQ = 1,
QTYPE_CQ,
QTYPE_TXQ,
- QTYPE_RXQ
+ QTYPE_RXQ,
+ QTYPE_MCCQ
};
struct be_cmd_req_q_destroy {
@@ -546,12 +608,6 @@
u32 rsvd;
};
-struct be_link_info {
- u8 duplex;
- u8 speed;
- u8 fault;
-};
-
enum {
PHY_LINK_DUPLEX_NONE = 0x0,
PHY_LINK_DUPLEX_HALF = 0x1,
@@ -657,6 +713,9 @@
struct be_queue_info *cq, struct be_queue_info *eq,
bool sol_evts, bool no_delay,
int num_cqe_dma_coalesce);
+extern int be_cmd_mccq_create(struct be_ctrl_info *ctrl,
+ struct be_queue_info *mccq,
+ struct be_queue_info *cq);
extern int be_cmd_txq_create(struct be_ctrl_info *ctrl,
struct be_queue_info *txq,
struct be_queue_info *cq);
@@ -667,7 +726,7 @@
extern int be_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q,
int type);
extern int be_cmd_link_status_query(struct be_ctrl_info *ctrl,
- struct be_link_info *link);
+ bool *link_up);
extern int be_cmd_reset(struct be_ctrl_info *ctrl);
extern int be_cmd_get_stats(struct be_ctrl_info *ctrl,
struct be_dma_mem *nonemb_cmd);
@@ -679,10 +738,11 @@
bool promiscuous);
extern int be_cmd_promiscuous_config(struct be_ctrl_info *ctrl,
u8 port_num, bool en);
-extern int be_cmd_mcast_mac_set(struct be_ctrl_info *ctrl, u32 if_id,
- u8 *mac_table, u32 num, bool promiscuous);
+extern int be_cmd_multicast_set(struct be_ctrl_info *ctrl, u32 if_id,
+ struct dev_mc_list *mc_list, u32 mc_count);
extern int be_cmd_set_flow_control(struct be_ctrl_info *ctrl,
u32 tx_fc, u32 rx_fc);
extern int be_cmd_get_flow_control(struct be_ctrl_info *ctrl,
u32 *tx_fc, u32 *rx_fc);
extern int be_cmd_query_fw_cfg(struct be_ctrl_info *ctrl, u32 *port_num);
+extern void be_process_mcc(struct be_ctrl_info *ctrl);
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index b132aa4..b02e805 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -61,7 +61,7 @@
/* Clear the interrupt for this eq */
#define DB_EQ_CLR_SHIFT (9) /* bit 9 */
/* Must be 1 */
-#define DB_EQ_EVNT_SHIFT (10) /* bit 10 */
+#define DB_EQ_EVNT_SHIFT (10) /* bit 10 */
/* Number of event entries processed */
#define DB_EQ_NUM_POPPED_SHIFT (16) /* bits 16 - 28 */
/* Rearm bit */
@@ -88,6 +88,12 @@
/* Number of rx frags posted */
#define DB_RQ_NUM_POSTED_SHIFT (24) /* bits 24 - 31 */
+/********** MCC door bell ************/
+#define DB_MCCQ_OFFSET 0x140
+#define DB_MCCQ_RING_ID_MASK 0x7FF /* bits 0 - 10 */
+/* Number of entries posted */
+#define DB_MCCQ_NUM_POSTED_SHIFT (16) /* bits 16 - 29 */
+
/*
* BE descriptors: host memory data structures whose formats
* are hardwired in BE silicon.
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 66bb568..66c10c8 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -60,26 +60,6 @@
return 0;
}
-static inline void *queue_head_node(struct be_queue_info *q)
-{
- return q->dma_mem.va + q->head * q->entry_size;
-}
-
-static inline void *queue_tail_node(struct be_queue_info *q)
-{
- return q->dma_mem.va + q->tail * q->entry_size;
-}
-
-static inline void queue_head_inc(struct be_queue_info *q)
-{
- index_inc(&q->head, q->len);
-}
-
-static inline void queue_tail_inc(struct be_queue_info *q)
-{
- index_inc(&q->tail, q->len);
-}
-
static void be_intr_set(struct be_ctrl_info *ctrl, bool enable)
{
u8 __iomem *addr = ctrl->pcicfg + PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET;
@@ -127,7 +107,7 @@
iowrite32(val, ctrl->db + DB_EQ_OFFSET);
}
-static void be_cq_notify(struct be_ctrl_info *ctrl, u16 qid,
+void be_cq_notify(struct be_ctrl_info *ctrl, u16 qid,
bool arm, u16 num_popped)
{
u32 val = 0;
@@ -234,28 +214,24 @@
dev_stats->tx_window_errors = 0;
}
-static void be_link_status_update(struct be_adapter *adapter)
+void be_link_status_update(void *ctxt, bool link_up)
{
- struct be_link_info *prev = &adapter->link;
- struct be_link_info now = { 0 };
+ struct be_adapter *adapter = ctxt;
struct net_device *netdev = adapter->netdev;
- be_cmd_link_status_query(&adapter->ctrl, &now);
-
/* If link came up or went down */
- if (now.speed != prev->speed && (now.speed == PHY_LINK_SPEED_ZERO ||
- prev->speed == PHY_LINK_SPEED_ZERO)) {
- if (now.speed == PHY_LINK_SPEED_ZERO) {
- netif_stop_queue(netdev);
- netif_carrier_off(netdev);
- printk(KERN_INFO "%s: Link down\n", netdev->name);
- } else {
+ if (adapter->link_up != link_up) {
+ if (link_up) {
netif_start_queue(netdev);
netif_carrier_on(netdev);
printk(KERN_INFO "%s: Link up\n", netdev->name);
+ } else {
+ netif_stop_queue(netdev);
+ netif_carrier_off(netdev);
+ printk(KERN_INFO "%s: Link down\n", netdev->name);
}
+ adapter->link_up = link_up;
}
- *prev = now;
}
/* Update the EQ delay n BE based on the RX frags consumed / sec */
@@ -569,47 +545,32 @@
be_vid_config(netdev);
}
-static void be_set_multicast_filter(struct net_device *netdev)
-{
- struct be_adapter *adapter = netdev_priv(netdev);
- struct dev_mc_list *mc_ptr;
- u8 mac_addr[32][ETH_ALEN];
- int i = 0;
-
- if (netdev->flags & IFF_ALLMULTI) {
- /* set BE in Multicast promiscuous */
- be_cmd_mcast_mac_set(&adapter->ctrl,
- adapter->if_handle, NULL, 0, true);
- return;
- }
-
- for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
- memcpy(&mac_addr[i][0], mc_ptr->dmi_addr, ETH_ALEN);
- if (++i >= 32) {
- be_cmd_mcast_mac_set(&adapter->ctrl,
- adapter->if_handle, &mac_addr[0][0], i, false);
- i = 0;
- }
-
- }
-
- if (i) {
- /* reset the promiscuous mode also. */
- be_cmd_mcast_mac_set(&adapter->ctrl,
- adapter->if_handle, &mac_addr[0][0], i, false);
- }
-}
-
static void be_set_multicast_list(struct net_device *netdev)
{
struct be_adapter *adapter = netdev_priv(netdev);
+ struct be_ctrl_info *ctrl = &adapter->ctrl;
if (netdev->flags & IFF_PROMISC) {
- be_cmd_promiscuous_config(&adapter->ctrl, adapter->port_num, 1);
- } else {
- be_cmd_promiscuous_config(&adapter->ctrl, adapter->port_num, 0);
- be_set_multicast_filter(netdev);
+ be_cmd_promiscuous_config(ctrl, adapter->port_num, 1);
+ adapter->promiscuous = true;
+ goto done;
}
+
+ /* BE was previously in promiscous mode; disable it */
+ if (adapter->promiscuous) {
+ adapter->promiscuous = false;
+ be_cmd_promiscuous_config(ctrl, adapter->port_num, 0);
+ }
+
+ if (netdev->flags & IFF_ALLMULTI) {
+ be_cmd_multicast_set(ctrl, adapter->if_handle, NULL, 0);
+ goto done;
+ }
+
+ be_cmd_multicast_set(ctrl, adapter->if_handle, netdev->mc_list,
+ netdev->mc_count);
+done:
+ return;
}
static void be_rx_rate_update(struct be_adapter *adapter)
@@ -960,10 +921,8 @@
return;
}
-static struct be_eth_tx_compl *
-be_tx_compl_get(struct be_adapter *adapter)
+static struct be_eth_tx_compl *be_tx_compl_get(struct be_queue_info *tx_cq)
{
- struct be_queue_info *tx_cq = &adapter->tx_obj.cq;
struct be_eth_tx_compl *txcp = queue_tail_node(tx_cq);
if (txcp->dw[offsetof(struct amap_eth_tx_compl, valid) / 32] == 0)
@@ -1051,6 +1010,59 @@
}
}
+static void be_mcc_queues_destroy(struct be_adapter *adapter)
+{
+ struct be_queue_info *q;
+ struct be_ctrl_info *ctrl = &adapter->ctrl;
+
+ q = &ctrl->mcc_obj.q;
+ if (q->created)
+ be_cmd_q_destroy(ctrl, q, QTYPE_MCCQ);
+ be_queue_free(adapter, q);
+
+ q = &ctrl->mcc_obj.cq;
+ if (q->created)
+ be_cmd_q_destroy(ctrl, q, QTYPE_CQ);
+ be_queue_free(adapter, q);
+}
+
+/* Must be called only after TX qs are created as MCC shares TX EQ */
+static int be_mcc_queues_create(struct be_adapter *adapter)
+{
+ struct be_queue_info *q, *cq;
+ struct be_ctrl_info *ctrl = &adapter->ctrl;
+
+ /* Alloc MCC compl queue */
+ cq = &ctrl->mcc_obj.cq;
+ if (be_queue_alloc(adapter, cq, MCC_CQ_LEN,
+ sizeof(struct be_mcc_cq_entry)))
+ goto err;
+
+ /* Ask BE to create MCC compl queue; share TX's eq */
+ if (be_cmd_cq_create(ctrl, cq, &adapter->tx_eq.q, false, true, 0))
+ goto mcc_cq_free;
+
+ /* Alloc MCC queue */
+ q = &ctrl->mcc_obj.q;
+ if (be_queue_alloc(adapter, q, MCC_Q_LEN, sizeof(struct be_mcc_wrb)))
+ goto mcc_cq_destroy;
+
+ /* Ask BE to create MCC queue */
+ if (be_cmd_mccq_create(ctrl, q, cq))
+ goto mcc_q_free;
+
+ return 0;
+
+mcc_q_free:
+ be_queue_free(adapter, q);
+mcc_cq_destroy:
+ be_cmd_q_destroy(ctrl, cq, QTYPE_CQ);
+mcc_cq_free:
+ be_queue_free(adapter, cq);
+err:
+ return -1;
+}
+
static void be_tx_queues_destroy(struct be_adapter *adapter)
{
struct be_queue_info *q;
@@ -1263,7 +1275,7 @@
return IRQ_HANDLED;
}
-static irqreturn_t be_msix_tx(int irq, void *dev)
+static irqreturn_t be_msix_tx_mcc(int irq, void *dev)
{
struct be_adapter *adapter = dev;
@@ -1324,40 +1336,51 @@
return work_done;
}
-/* For TX we don't honour budget; consume everything */
-int be_poll_tx(struct napi_struct *napi, int budget)
+void be_process_tx(struct be_adapter *adapter)
{
- struct be_eq_obj *tx_eq = container_of(napi, struct be_eq_obj, napi);
- struct be_adapter *adapter =
- container_of(tx_eq, struct be_adapter, tx_eq);
- struct be_tx_obj *tx_obj = &adapter->tx_obj;
- struct be_queue_info *tx_cq = &tx_obj->cq;
- struct be_queue_info *txq = &tx_obj->q;
+ struct be_queue_info *txq = &adapter->tx_obj.q;
+ struct be_queue_info *tx_cq = &adapter->tx_obj.cq;
struct be_eth_tx_compl *txcp;
u32 num_cmpl = 0;
u16 end_idx;
- while ((txcp = be_tx_compl_get(adapter))) {
+ while ((txcp = be_tx_compl_get(tx_cq))) {
end_idx = AMAP_GET_BITS(struct amap_eth_tx_compl,
wrb_index, txcp);
be_tx_compl_process(adapter, end_idx);
num_cmpl++;
}
- /* As Tx wrbs have been freed up, wake up netdev queue if
- * it was stopped due to lack of tx wrbs.
- */
- if (netif_queue_stopped(adapter->netdev) &&
+ if (num_cmpl) {
+ be_cq_notify(&adapter->ctrl, tx_cq->id, true, num_cmpl);
+
+ /* As Tx wrbs have been freed up, wake up netdev queue if
+ * it was stopped due to lack of tx wrbs.
+ */
+ if (netif_queue_stopped(adapter->netdev) &&
atomic_read(&txq->used) < txq->len / 2) {
- netif_wake_queue(adapter->netdev);
+ netif_wake_queue(adapter->netdev);
+ }
+
+ drvr_stats(adapter)->be_tx_events++;
+ drvr_stats(adapter)->be_tx_compl += num_cmpl;
}
+}
+
+/* As TX and MCC share the same EQ check for both TX and MCC completions.
+ * For TX/MCC we don't honour budget; consume everything
+ */
+static int be_poll_tx_mcc(struct napi_struct *napi, int budget)
+{
+ struct be_eq_obj *tx_eq = container_of(napi, struct be_eq_obj, napi);
+ struct be_adapter *adapter =
+ container_of(tx_eq, struct be_adapter, tx_eq);
napi_complete(napi);
- be_cq_notify(&adapter->ctrl, tx_cq->id, true, num_cmpl);
+ be_process_tx(adapter);
- drvr_stats(adapter)->be_tx_events++;
- drvr_stats(adapter)->be_tx_compl += num_cmpl;
+ be_process_mcc(&adapter->ctrl);
return 1;
}
@@ -1368,9 +1391,6 @@
container_of(work, struct be_adapter, work.work);
int status;
- /* Check link */
- be_link_status_update(adapter);
-
/* Get Stats */
status = be_cmd_get_stats(&adapter->ctrl, &adapter->stats.cmd);
if (!status)
@@ -1419,7 +1439,7 @@
sprintf(tx_eq->desc, "%s-tx", netdev->name);
vec = be_msix_vec_get(adapter, tx_eq->q.id);
- status = request_irq(vec, be_msix_tx, 0, tx_eq->desc, adapter);
+ status = request_irq(vec, be_msix_tx_mcc, 0, tx_eq->desc, adapter);
if (status)
goto err;
@@ -1495,6 +1515,39 @@
struct be_ctrl_info *ctrl = &adapter->ctrl;
struct be_eq_obj *rx_eq = &adapter->rx_eq;
struct be_eq_obj *tx_eq = &adapter->tx_eq;
+ bool link_up;
+ int status;
+
+ /* First time posting */
+ be_post_rx_frags(adapter);
+
+ napi_enable(&rx_eq->napi);
+ napi_enable(&tx_eq->napi);
+
+ be_irq_register(adapter);
+
+ be_intr_set(ctrl, true);
+
+ /* The evt queues are created in unarmed state; arm them */
+ be_eq_notify(ctrl, rx_eq->q.id, true, false, 0);
+ be_eq_notify(ctrl, tx_eq->q.id, true, false, 0);
+
+ /* Rx compl queue may be in unarmed state; rearm it */
+ be_cq_notify(ctrl, adapter->rx_obj.cq.id, true, 0);
+
+ status = be_cmd_link_status_query(ctrl, &link_up);
+ if (status)
+ return status;
+ be_link_status_update(adapter, link_up);
+
+ schedule_delayed_work(&adapter->work, msecs_to_jiffies(100));
+ return 0;
+}
+
+static int be_setup(struct be_adapter *adapter)
+{
+ struct be_ctrl_info *ctrl = &adapter->ctrl;
+ struct net_device *netdev = adapter->netdev;
u32 if_flags;
int status;
@@ -1521,29 +1574,14 @@
if (status != 0)
goto tx_qs_destroy;
- /* First time posting */
- be_post_rx_frags(adapter);
+ status = be_mcc_queues_create(adapter);
+ if (status != 0)
+ goto rx_qs_destroy;
- napi_enable(&rx_eq->napi);
- napi_enable(&tx_eq->napi);
-
- be_irq_register(adapter);
-
- be_intr_set(ctrl, true);
-
- /* The evt queues are created in the unarmed state; arm them */
- be_eq_notify(ctrl, rx_eq->q.id, true, false, 0);
- be_eq_notify(ctrl, tx_eq->q.id, true, false, 0);
-
- /* The compl queues are created in the unarmed state; arm them */
- be_cq_notify(ctrl, adapter->rx_obj.cq.id, true, 0);
- be_cq_notify(ctrl, adapter->tx_obj.cq.id, true, 0);
-
- be_link_status_update(adapter);
-
- schedule_delayed_work(&adapter->work, msecs_to_jiffies(100));
return 0;
+rx_qs_destroy:
+ be_rx_queues_destroy(adapter);
tx_qs_destroy:
be_tx_queues_destroy(adapter);
if_destroy:
@@ -1552,6 +1590,19 @@
return status;
}
+static int be_clear(struct be_adapter *adapter)
+{
+ struct be_ctrl_info *ctrl = &adapter->ctrl;
+
+ be_rx_queues_destroy(adapter);
+ be_tx_queues_destroy(adapter);
+
+ be_cmd_if_destroy(ctrl, adapter->if_handle);
+
+ be_mcc_queues_destroy(adapter);
+ return 0;
+}
+
static int be_close(struct net_device *netdev)
{
struct be_adapter *adapter = netdev_priv(netdev);
@@ -1564,7 +1615,7 @@
netif_stop_queue(netdev);
netif_carrier_off(netdev);
- adapter->link.speed = PHY_LINK_SPEED_ZERO;
+ adapter->link_up = false;
be_intr_set(ctrl, false);
@@ -1581,10 +1632,6 @@
napi_disable(&rx_eq->napi);
napi_disable(&tx_eq->napi);
- be_rx_queues_destroy(adapter);
- be_tx_queues_destroy(adapter);
-
- be_cmd_if_destroy(ctrl, adapter->if_handle);
return 0;
}
@@ -1673,7 +1720,7 @@
netif_napi_add(netdev, &adapter->rx_eq.napi, be_poll_rx,
BE_NAPI_WEIGHT);
- netif_napi_add(netdev, &adapter->tx_eq.napi, be_poll_tx,
+ netif_napi_add(netdev, &adapter->tx_eq.napi, be_poll_tx_mcc,
BE_NAPI_WEIGHT);
netif_carrier_off(netdev);
@@ -1755,7 +1802,12 @@
mbox_mem_align->va = PTR_ALIGN(mbox_mem_alloc->va, 16);
mbox_mem_align->dma = PTR_ALIGN(mbox_mem_alloc->dma, 16);
memset(mbox_mem_align->va, 0, sizeof(struct be_mcc_mailbox));
- spin_lock_init(&ctrl->cmd_lock);
+ spin_lock_init(&ctrl->mbox_lock);
+ spin_lock_init(&ctrl->mcc_lock);
+ spin_lock_init(&ctrl->mcc_cq_lock);
+
+ ctrl->async_cb = be_link_status_update;
+ ctrl->adapter_ctxt = adapter;
val = ioread32(ctrl->pcicfg + PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET);
ctrl->pci_func = (val >> MEMBAR_CTRL_INT_CTRL_PFUNC_SHIFT) &
@@ -1793,6 +1845,8 @@
unregister_netdev(adapter->netdev);
+ be_clear(adapter);
+
be_stats_cleanup(adapter);
be_ctrl_cleanup(adapter);
@@ -1890,13 +1944,18 @@
be_netdev_init(netdev);
SET_NETDEV_DEV(netdev, &adapter->pdev->dev);
+ status = be_setup(adapter);
+ if (status)
+ goto stats_clean;
status = register_netdev(netdev);
if (status != 0)
- goto stats_clean;
+ goto unsetup;
dev_info(&pdev->dev, "%s port %d\n", nic_name(pdev), adapter->port_num);
return 0;
+unsetup:
+ be_clear(adapter);
stats_clean:
be_stats_cleanup(adapter);
ctrl_clean:
@@ -1921,6 +1980,7 @@
if (netif_running(netdev)) {
rtnl_lock();
be_close(netdev);
+ be_clear(adapter);
rtnl_unlock();
}
@@ -1947,6 +2007,7 @@
if (netif_running(netdev)) {
rtnl_lock();
+ be_setup(adapter);
be_open(netdev);
rtnl_unlock();
}
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 677f604..679885a 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -1997,7 +1997,7 @@
struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
struct e1000_hw *hw = &adapter->hw;
struct net_device *poll_dev = adapter->netdev;
- int tx_cleaned = 0, work_done = 0;
+ int tx_cleaned = 1, work_done = 0;
adapter = netdev_priv(poll_dev);
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index e02bafd..93f4abd 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c
@@ -668,7 +668,7 @@
queue_work(mdev->workqueue, &priv->mcast_task);
priv->port_up = true;
- netif_start_queue(dev);
+ netif_tx_start_all_queues(dev);
return 0;
mac_err:
@@ -700,14 +700,14 @@
en_dbg(DRV, priv, "stop port called while port already down\n");
return;
}
- netif_stop_queue(dev);
/* Synchronize with tx routine */
netif_tx_lock_bh(dev);
- priv->port_up = false;
+ netif_tx_stop_all_queues(dev);
netif_tx_unlock_bh(dev);
/* close port*/
+ priv->port_up = false;
mlx4_CLOSE_PORT(mdev->dev, priv->port);
/* Unregister Mac address for the port */
@@ -881,7 +881,6 @@
mlx4_free_hwq_res(mdev->dev, &priv->res, MLX4_EN_PAGE_SIZE);
cancel_delayed_work(&priv->stats_task);
- cancel_delayed_work(&priv->refill_task);
/* flush any pending task for this netdev */
flush_workqueue(mdev->workqueue);
@@ -986,7 +985,6 @@
spin_lock_init(&priv->stats_lock);
INIT_WORK(&priv->mcast_task, mlx4_en_do_set_multicast);
INIT_WORK(&priv->mac_task, mlx4_en_do_set_mac);
- INIT_DELAYED_WORK(&priv->refill_task, mlx4_en_rx_refill);
INIT_WORK(&priv->watchdog_task, mlx4_en_restart);
INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate);
INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats);
diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c
index 5a14899..91bdfdf 100644
--- a/drivers/net/mlx4/en_rx.c
+++ b/drivers/net/mlx4/en_rx.c
@@ -269,31 +269,6 @@
return 0;
}
-static int mlx4_en_fill_rx_buf(struct net_device *dev,
- struct mlx4_en_rx_ring *ring)
-{
- struct mlx4_en_priv *priv = netdev_priv(dev);
- int num = 0;
- int err;
-
- while ((u32) (ring->prod - ring->cons) < ring->actual_size) {
- err = mlx4_en_prepare_rx_desc(priv, ring, ring->prod &
- ring->size_mask);
- if (err) {
- if (netif_msg_rx_err(priv))
- en_warn(priv, "Failed preparing rx descriptor\n");
- priv->port_stats.rx_alloc_failed++;
- break;
- }
- ++num;
- ++ring->prod;
- }
- if ((u32) (ring->prod - ring->cons) == ring->actual_size)
- ring->full = 1;
-
- return num;
-}
-
static void mlx4_en_free_rx_buf(struct mlx4_en_priv *priv,
struct mlx4_en_rx_ring *ring)
{
@@ -312,42 +287,6 @@
}
}
-
-void mlx4_en_rx_refill(struct work_struct *work)
-{
- struct delayed_work *delay = to_delayed_work(work);
- struct mlx4_en_priv *priv = container_of(delay, struct mlx4_en_priv,
- refill_task);
- struct mlx4_en_dev *mdev = priv->mdev;
- struct net_device *dev = priv->dev;
- struct mlx4_en_rx_ring *ring;
- int need_refill = 0;
- int i;
-
- mutex_lock(&mdev->state_lock);
- if (!mdev->device_up || !priv->port_up)
- goto out;
-
- /* We only get here if there are no receive buffers, so we can't race
- * with Rx interrupts while filling buffers */
- for (i = 0; i < priv->rx_ring_num; i++) {
- ring = &priv->rx_ring[i];
- if (ring->need_refill) {
- if (mlx4_en_fill_rx_buf(dev, ring)) {
- ring->need_refill = 0;
- mlx4_en_update_rx_prod_db(ring);
- } else
- need_refill = 1;
- }
- }
- if (need_refill)
- queue_delayed_work(mdev->workqueue, &priv->refill_task, HZ);
-
-out:
- mutex_unlock(&mdev->state_lock);
-}
-
-
int mlx4_en_create_rx_ring(struct mlx4_en_priv *priv,
struct mlx4_en_rx_ring *ring, u32 size, u16 stride)
{
@@ -457,9 +396,6 @@
ring_ind--;
goto err_allocator;
}
-
- /* Fill Rx buffers */
- ring->full = 0;
}
err = mlx4_en_fill_rx_buffers(priv);
if (err)
@@ -647,33 +583,6 @@
return skb;
}
-static void mlx4_en_copy_desc(struct mlx4_en_priv *priv,
- struct mlx4_en_rx_ring *ring,
- int from, int to, int num)
-{
- struct skb_frag_struct *skb_frags_from;
- struct skb_frag_struct *skb_frags_to;
- struct mlx4_en_rx_desc *rx_desc_from;
- struct mlx4_en_rx_desc *rx_desc_to;
- int from_index, to_index;
- int nr, i;
-
- for (i = 0; i < num; i++) {
- from_index = (from + i) & ring->size_mask;
- to_index = (to + i) & ring->size_mask;
- skb_frags_from = ring->rx_info + (from_index << priv->log_rx_info);
- skb_frags_to = ring->rx_info + (to_index << priv->log_rx_info);
- rx_desc_from = ring->buf + (from_index << ring->log_stride);
- rx_desc_to = ring->buf + (to_index << ring->log_stride);
-
- for (nr = 0; nr < priv->num_frags; nr++) {
- skb_frags_to[nr].page = skb_frags_from[nr].page;
- skb_frags_to[nr].page_offset = skb_frags_from[nr].page_offset;
- rx_desc_to->data[nr].addr = rx_desc_from->data[nr].addr;
- }
- }
-}
-
int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int budget)
{
@@ -821,11 +730,6 @@
wmb(); /* ensure HW sees CQ consumer before we post new buffers */
ring->cons = cq->mcq.cons_index;
ring->prod += polled; /* Polled descriptors were realocated in place */
- if (unlikely(!ring->full)) {
- mlx4_en_copy_desc(priv, ring, ring->cons - polled,
- ring->prod - polled, polled);
- mlx4_en_fill_rx_buf(dev, ring);
- }
mlx4_en_update_rx_prod_db(ring);
return polled;
}
diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c
index 5dc7466..08c43f2 100644
--- a/drivers/net/mlx4/en_tx.c
+++ b/drivers/net/mlx4/en_tx.c
@@ -515,16 +515,9 @@
else {
if (netif_msg_tx_err(priv))
en_warn(priv, "Non-linear headers\n");
- dev_kfree_skb_any(skb);
return 0;
}
}
- if (unlikely(*lso_header_size > MAX_LSO_HDR_SIZE)) {
- if (netif_msg_tx_err(priv))
- en_warn(priv, "LSO header size too big\n");
- dev_kfree_skb_any(skb);
- return 0;
- }
} else {
*lso_header_size = 0;
if (!is_inline(skb, NULL))
@@ -616,13 +609,9 @@
int lso_header_size;
void *fragptr;
- if (unlikely(!skb->len)) {
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
real_size = get_real_size(skb, dev, &lso_header_size);
if (unlikely(!real_size))
- return NETDEV_TX_OK;
+ goto tx_drop;
/* Allign descriptor to TXBB size */
desc_size = ALIGN(real_size, TXBB_SIZE);
@@ -630,8 +619,7 @@
if (unlikely(nr_txbb > MAX_DESC_TXBBS)) {
if (netif_msg_tx_err(priv))
en_warn(priv, "Oversized header or SG list\n");
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
+ goto tx_drop;
}
tx_ind = skb->queue_mapping;
@@ -653,14 +641,6 @@
return NETDEV_TX_BUSY;
}
- /* Now that we know what Tx ring to use */
- if (unlikely(!priv->port_up)) {
- if (netif_msg_tx_err(priv))
- en_warn(priv, "xmit: port down!\n");
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
-
/* Track current inflight packets for performance analysis */
AVG_PERF_COUNTER(priv->pstats.inflight_avg,
(u32) (ring->prod - ring->cons - 1));
@@ -785,5 +765,10 @@
mlx4_en_xmit_poll(priv, tx_ind);
return 0;
+
+tx_drop:
+ dev_kfree_skb_any(skb);
+ priv->stats.tx_dropped++;
+ return NETDEV_TX_OK;
}
diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h
index d43a9e4..c7c5e86 100644
--- a/drivers/net/mlx4/mlx4_en.h
+++ b/drivers/net/mlx4/mlx4_en.h
@@ -99,7 +99,6 @@
#define RSS_FACTOR 2
#define TXBB_SIZE 64
#define HEADROOM (2048 / TXBB_SIZE + 1)
-#define MAX_LSO_HDR_SIZE 92
#define STAMP_STRIDE 64
#define STAMP_DWORDS (STAMP_STRIDE / 4)
#define STAMP_SHIFT 31
@@ -296,8 +295,6 @@
u32 prod;
u32 cons;
u32 buf_size;
- int need_refill;
- int full;
void *buf;
void *rx_info;
unsigned long bytes;
@@ -495,7 +492,6 @@
struct mlx4_en_cq rx_cq[MAX_RX_RINGS];
struct work_struct mcast_task;
struct work_struct mac_task;
- struct delayed_work refill_task;
struct work_struct watchdog_task;
struct work_struct linkstate_task;
struct delayed_work stats_task;
@@ -565,7 +561,6 @@
int mlx4_en_config_rss_steer(struct mlx4_en_priv *priv);
void mlx4_en_release_rss_steer(struct mlx4_en_priv *priv);
int mlx4_en_free_tx_buf(struct net_device *dev, struct mlx4_en_tx_ring *ring);
-void mlx4_en_rx_refill(struct work_struct *work);
void mlx4_en_rx_irq(struct mlx4_cq *mcq);
int mlx4_SET_MCAST_FLTR(struct mlx4_dev *dev, u8 port, u64 mac, u64 clear, u8 mode);
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 745ae8b4..0f32db3 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -1750,12 +1750,12 @@
uc_addr_set(mp, dev->dev_addr);
- port_config = rdlp(mp, PORT_CONFIG);
+ port_config = rdlp(mp, PORT_CONFIG) & ~UNICAST_PROMISCUOUS_MODE;
+
nibbles = uc_addr_filter_mask(dev);
if (!nibbles) {
port_config |= UNICAST_PROMISCUOUS_MODE;
- wrlp(mp, PORT_CONFIG, port_config);
- return;
+ nibbles = 0xffff;
}
for (i = 0; i < 16; i += 4) {
@@ -1776,7 +1776,6 @@
wrl(mp, off, v);
}
- port_config &= ~UNICAST_PROMISCUOUS_MODE;
wrlp(mp, PORT_CONFIG, port_config);
}
diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c
index 6de8399..17c116b 100644
--- a/drivers/net/ppp_async.c
+++ b/drivers/net/ppp_async.c
@@ -356,7 +356,6 @@
if (!skb_queue_empty(&ap->rqueue))
tasklet_schedule(&ap->tsk);
ap_put(ap);
- tty_unthrottle(tty);
}
static void
diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c
index d2fa2db..aa3d39f 100644
--- a/drivers/net/ppp_synctty.c
+++ b/drivers/net/ppp_synctty.c
@@ -397,7 +397,6 @@
if (!skb_queue_empty(&ap->rqueue))
tasklet_schedule(&ap->tsk);
sp_put(ap);
- tty_unthrottle(tty);
}
static void
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index 8a823ec..bbc6d4d 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -3837,7 +3837,9 @@
16) | ISP_CONTROL_RI));
}
+ spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
ssleep(1);
+ spin_lock_irqsave(&qdev->hw_lock, hw_flags);
} while (--max_wait_time);
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 4e22462..4b53b58 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -51,9 +51,6 @@
#define TX_BUFFS_AVAIL(tp) \
(tp->dirty_tx + NUM_TX_DESC - tp->cur_tx - 1)
-/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
-static const int max_interrupt_work = 20;
-
/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
The RTL chips use a 64 element hash table based on the Ethernet CRC. */
static const int multicast_filter_limit = 32;
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 3717569..a906d39 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -169,10 +169,12 @@
The Linux-USB CDC Ethernet Gadget driver is an open implementation.
This driver should work with at least the following devices:
+ * Dell Wireless 5530 HSPA
* Ericsson PipeRider (all variants)
+ * Ericsson Mobile Broadband Module (all variants)
* Motorola (DM100 and SB4100)
* Broadcom Cable Modem (reference design)
- * Toshiba PCX1100U
+ * Toshiba (PCX1100U and F3507g)
* ...
This driver creates an interface named "ethX", where X depends on
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 01fd528..4a6aff5 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -533,6 +533,31 @@
USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1900, USB_CLASS_COMM,
USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long) &cdc_info,
+}, {
+ /* Ericsson F3507g ver. 2 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1902, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
+}, {
+ /* Ericsson F3607gw */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1904, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
+}, {
+ /* Ericsson F3307 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1906, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
+}, {
+ /* Toshiba F3507g */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130b, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
+}, {
+ /* Dell F3507g */
+ USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8147, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
},
{ }, // END
};
diff --git a/drivers/net/usb/cdc_subset.c b/drivers/net/usb/cdc_subset.c
index c66b9c3..ca39ace 100644
--- a/drivers/net/usb/cdc_subset.c
+++ b/drivers/net/usb/cdc_subset.c
@@ -307,9 +307,10 @@
USB_DEVICE (0x1286, 0x8001), // "blob" bootloader
.driver_info = (unsigned long) &blob_info,
}, {
- // Linux Ethernet/RNDIS gadget on pxa210/25x/26x, second config
- // e.g. Gumstix, current OpenZaurus, ...
- USB_DEVICE_VER (0x0525, 0xa4a2, 0x0203, 0x0203),
+ // Linux Ethernet/RNDIS gadget, mostly on PXA, second config
+ // e.g. Gumstix, current OpenZaurus, ... or anything else
+ // that just enables this gadget option.
+ USB_DEVICE (0x0525, 0xa4a2),
.driver_info = (unsigned long) &linuxdev_info,
},
#endif
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index 2138535..73acbd2 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -297,7 +297,7 @@
pegasus->dr.bRequestType = PEGASUS_REQT_WRITE;
pegasus->dr.bRequest = PEGASUS_REQ_SET_REGS;
- pegasus->dr.wValue = 0;
+ pegasus->dr.wValue = cpu_to_le16(0);
pegasus->dr.wIndex = cpu_to_le16(EthCtrl0);
pegasus->dr.wLength = cpu_to_le16(3);
pegasus->ctrl_urb->transfer_buffer_length = 3;
@@ -446,11 +446,12 @@
int i;
__u8 tmp, d[4] = { 0x3f, 0, 0, EPROM_WRITE };
int ret;
+ __le16 le_data = cpu_to_le16(data);
set_registers(pegasus, EpromOffset, 4, d);
enable_eprom_write(pegasus);
set_register(pegasus, EpromOffset, index);
- set_registers(pegasus, EpromData, 2, &data);
+ set_registers(pegasus, EpromData, 2, &le_data);
set_register(pegasus, EpromCtrl, EPROM_WRITE);
for (i = 0; i < REG_TIMEOUT; i++) {
@@ -923,29 +924,32 @@
static inline void disable_net_traffic(pegasus_t * pegasus)
{
- int tmp = 0;
+ __le16 tmp = cpu_to_le16(0);
- set_registers(pegasus, EthCtrl0, 2, &tmp);
+ set_registers(pegasus, EthCtrl0, sizeof(tmp), &tmp);
}
static inline void get_interrupt_interval(pegasus_t * pegasus)
{
- __u8 data[2];
+ u16 data;
+ u8 interval;
- read_eprom_word(pegasus, 4, (__u16 *) data);
+ read_eprom_word(pegasus, 4, &data);
+ interval = data >> 8;
if (pegasus->usb->speed != USB_SPEED_HIGH) {
- if (data[1] < 0x80) {
+ if (interval < 0x80) {
if (netif_msg_timer(pegasus))
dev_info(&pegasus->intf->dev, "intr interval "
"changed from %ums to %ums\n",
- data[1], 0x80);
- data[1] = 0x80;
+ interval, 0x80);
+ interval = 0x80;
+ data = (data & 0x00FF) | ((u16)interval << 8);
#ifdef PEGASUS_WRITE_EEPROM
- write_eprom_word(pegasus, 4, *(__u16 *) data);
+ write_eprom_word(pegasus, 4, data);
#endif
}
}
- pegasus->intr_interval = data[1];
+ pegasus->intr_interval = interval;
}
static void set_carrier(struct net_device *net)
@@ -1299,7 +1303,8 @@
/* Special quirk to keep the driver from handling the Belkin Bluetooth
* dongle which happens to have the same ID.
*/
- if ((udd->idVendor == VENDOR_BELKIN && udd->idProduct == 0x0121) &&
+ if ((udd->idVendor == cpu_to_le16(VENDOR_BELKIN)) &&
+ (udd->idProduct == cpu_to_le16(0x0121)) &&
(udd->bDeviceClass == USB_CLASS_WIRELESS_CONTROLLER) &&
(udd->bDeviceProtocol == 1))
return 1;
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index b02f7ad..3ba3595 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1847,7 +1847,7 @@
*/
if (tdinfo->skb_dma) {
- pktlen = (skb->len > ETH_ZLEN ? : ETH_ZLEN);
+ pktlen = max_t(unsigned int, skb->len, ETH_ZLEN);
for (i = 0; i < tdinfo->nskb_dma; i++) {
#ifdef VELOCITY_ZERO_COPY_SUPPORT
pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], le16_to_cpu(td->tdesc1.len), PCI_DMA_TODEVICE);
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 55f7de0..ea04515 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -538,6 +538,7 @@
sc->iobase = mem; /* So we can unmap it on detach */
sc->cachelsz = csz * sizeof(u32); /* convert to bytes */
sc->opmode = NL80211_IFTYPE_STATION;
+ sc->bintval = 1000;
mutex_init(&sc->lock);
spin_lock_init(&sc->rxbuflock);
spin_lock_init(&sc->txbuflock);
@@ -686,6 +687,13 @@
if (err)
return err;
+ /*
+ * Suspend/Resume resets the PCI configuration space, so we have to
+ * re-disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state
+ */
+ pci_write_config_byte(pdev, 0x41, 0);
+
err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
if (err) {
ATH5K_ERR(sc, "request_irq failed\n");
@@ -2748,9 +2756,6 @@
goto end;
}
- /* Set to a reasonable value. Note that this will
- * be set to mac80211's value at ath5k_config(). */
- sc->bintval = 1000;
ath5k_hw_set_lladdr(sc->ah, conf->mac_addr);
ret = 0;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 9f49a32..66a6c1f 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1196,8 +1196,8 @@
ath9k_hw_phy_disable(ah);
ath9k_hw_configpcipowersave(ah, 1);
- ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
ath9k_ps_restore(sc);
+ ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
}
/*******************/
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index ccdf20a..170c5b3 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -87,6 +87,7 @@
struct ath_softc *sc;
struct ieee80211_hw *hw;
u8 csz;
+ u32 val;
int ret = 0;
struct ath_hw *ah;
@@ -133,6 +134,14 @@
pci_set_master(pdev);
+ /*
+ * Disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state.
+ */
+ pci_read_config_dword(pdev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+
ret = pci_request_region(pdev, 0, "ath9k");
if (ret) {
dev_err(&pdev->dev, "PCI memory region reserve error\n");
@@ -239,12 +248,21 @@
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
struct ath_wiphy *aphy = hw->priv;
struct ath_softc *sc = aphy->sc;
+ u32 val;
int err;
err = pci_enable_device(pdev);
if (err)
return err;
pci_restore_state(pdev);
+ /*
+ * Suspend/Resume resets the PCI configuration space, so we have to
+ * re-disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state
+ */
+ pci_read_config_dword(pdev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
/* Enable LED */
ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index f99f3a7..cece1c4 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -539,11 +539,14 @@
if (ath_beacon_dtim_pending_cab(skb)) {
/*
* Remain awake waiting for buffered broadcast/multicast
- * frames.
+ * frames. If the last broadcast/multicast frame is not
+ * received properly, the next beacon frame will work as
+ * a backup trigger for returning into NETWORK SLEEP state,
+ * so we are waiting for it as well.
*/
DPRINTF(sc, ATH_DBG_PS, "Received DTIM beacon indicating "
"buffered broadcast/multicast frame(s)\n");
- sc->sc_flags |= SC_OP_WAIT_FOR_CAB;
+ sc->sc_flags |= SC_OP_WAIT_FOR_CAB | SC_OP_WAIT_FOR_BEACON;
return;
}
diff --git a/drivers/net/wireless/iwmc3200wifi/iwm.h b/drivers/net/wireless/iwmc3200wifi/iwm.h
index 635c16e..77c339f 100644
--- a/drivers/net/wireless/iwmc3200wifi/iwm.h
+++ b/drivers/net/wireless/iwmc3200wifi/iwm.h
@@ -288,6 +288,7 @@
u8 *eeprom;
struct timer_list watchdog;
struct work_struct reset_worker;
+ struct mutex mutex;
struct rfkill *rfkill;
char private[0] __attribute__((__aligned__(NETDEV_ALIGN)));
@@ -315,8 +316,11 @@
void *iwm_if_alloc(int sizeof_bus, struct device *dev,
struct iwm_if_ops *if_ops);
void iwm_if_free(struct iwm_priv *iwm);
+int iwm_if_add(struct iwm_priv *iwm);
+void iwm_if_remove(struct iwm_priv *iwm);
int iwm_mode_to_nl80211_iftype(int mode);
int iwm_priv_init(struct iwm_priv *iwm);
+void iwm_priv_deinit(struct iwm_priv *iwm);
void iwm_reset(struct iwm_priv *iwm);
void iwm_tx_credit_init_pools(struct iwm_priv *iwm,
struct iwm_umac_notif_alive *alive);
diff --git a/drivers/net/wireless/iwmc3200wifi/main.c b/drivers/net/wireless/iwmc3200wifi/main.c
index 6a2640f..8be206d 100644
--- a/drivers/net/wireless/iwmc3200wifi/main.c
+++ b/drivers/net/wireless/iwmc3200wifi/main.c
@@ -112,6 +112,9 @@
iwm_send_umac_stats_req(iwm, 0);
}
+int __iwm_up(struct iwm_priv *iwm);
+int __iwm_down(struct iwm_priv *iwm);
+
static void iwm_reset_worker(struct work_struct *work)
{
struct iwm_priv *iwm;
@@ -120,6 +123,19 @@
iwm = container_of(work, struct iwm_priv, reset_worker);
+ /*
+ * XXX: The iwm->mutex is introduced purely for this reset work,
+ * because the other users for iwm_up and iwm_down are only netdev
+ * ndo_open and ndo_stop which are already protected by rtnl.
+ * Please remove iwm->mutex together if iwm_reset_worker() is not
+ * required in the future.
+ */
+ if (!mutex_trylock(&iwm->mutex)) {
+ IWM_WARN(iwm, "We are in the middle of interface bringing "
+ "UP/DOWN. Skip driver resetting.\n");
+ return;
+ }
+
if (iwm->umac_profile_active) {
profile = kmalloc(sizeof(struct iwm_umac_profile), GFP_KERNEL);
if (profile)
@@ -128,10 +144,10 @@
IWM_ERR(iwm, "Couldn't alloc memory for profile\n");
}
- iwm_down(iwm);
+ __iwm_down(iwm);
while (retry++ < 3) {
- ret = iwm_up(iwm);
+ ret = __iwm_up(iwm);
if (!ret)
break;
@@ -142,7 +158,7 @@
IWM_WARN(iwm, "iwm_up() failed: %d\n", ret);
kfree(profile);
- return;
+ goto out;
}
if (profile) {
@@ -151,6 +167,9 @@
iwm_send_mlme_profile(iwm);
kfree(profile);
}
+
+ out:
+ mutex_unlock(&iwm->mutex);
}
static void iwm_watchdog(unsigned long data)
@@ -215,10 +234,21 @@
init_timer(&iwm->watchdog);
iwm->watchdog.function = iwm_watchdog;
iwm->watchdog.data = (unsigned long)iwm;
+ mutex_init(&iwm->mutex);
return 0;
}
+void iwm_priv_deinit(struct iwm_priv *iwm)
+{
+ int i;
+
+ for (i = 0; i < IWM_TX_QUEUES; i++)
+ destroy_workqueue(iwm->txq[i].wq);
+
+ destroy_workqueue(iwm->rx_wq);
+}
+
/*
* We reset all the structures, and we reset the UMAC.
* After calling this routine, you're expected to reload
@@ -466,7 +496,7 @@
iwm_rx_free(iwm);
- cancel_delayed_work(&iwm->stats_request);
+ cancel_delayed_work_sync(&iwm->stats_request);
memset(wstats, 0, sizeof(struct iw_statistics));
wstats->qual.updated = IW_QUAL_ALL_INVALID;
@@ -511,7 +541,7 @@
return 0;
}
-int iwm_up(struct iwm_priv *iwm)
+int __iwm_up(struct iwm_priv *iwm)
{
int ret;
struct iwm_notif *notif_reboot, *notif_ack = NULL;
@@ -647,7 +677,18 @@
return -EIO;
}
-int iwm_down(struct iwm_priv *iwm)
+int iwm_up(struct iwm_priv *iwm)
+{
+ int ret;
+
+ mutex_lock(&iwm->mutex);
+ ret = __iwm_up(iwm);
+ mutex_unlock(&iwm->mutex);
+
+ return ret;
+}
+
+int __iwm_down(struct iwm_priv *iwm)
{
int ret;
@@ -678,3 +719,14 @@
return 0;
}
+
+int iwm_down(struct iwm_priv *iwm)
+{
+ int ret;
+
+ mutex_lock(&iwm->mutex);
+ ret = __iwm_down(iwm);
+ mutex_unlock(&iwm->mutex);
+
+ return ret;
+}
diff --git a/drivers/net/wireless/iwmc3200wifi/netdev.c b/drivers/net/wireless/iwmc3200wifi/netdev.c
index 68e2c3b..aaa20c6 100644
--- a/drivers/net/wireless/iwmc3200wifi/netdev.c
+++ b/drivers/net/wireless/iwmc3200wifi/netdev.c
@@ -114,32 +114,31 @@
iwm = wdev_to_iwm(wdev);
iwm->bus_ops = if_ops;
iwm->wdev = wdev;
- iwm_priv_init(iwm);
+
+ ret = iwm_priv_init(iwm);
+ if (ret) {
+ dev_err(dev, "failed to init iwm_priv\n");
+ goto out_wdev;
+ }
+
wdev->iftype = iwm_mode_to_nl80211_iftype(iwm->conf.mode);
- ndev = alloc_netdev_mq(0, "wlan%d", ether_setup,
- IWM_TX_QUEUES);
+ ndev = alloc_netdev_mq(0, "wlan%d", ether_setup, IWM_TX_QUEUES);
if (!ndev) {
dev_err(dev, "no memory for network device instance\n");
- goto out_wdev;
+ goto out_priv;
}
ndev->netdev_ops = &iwm_netdev_ops;
ndev->wireless_handlers = &iwm_iw_handler_def;
ndev->ieee80211_ptr = wdev;
SET_NETDEV_DEV(ndev, wiphy_dev(wdev->wiphy));
- ret = register_netdev(ndev);
- if (ret < 0) {
- dev_err(dev, "Failed to register netdev: %d\n", ret);
- goto out_ndev;
- }
-
wdev->netdev = ndev;
return iwm;
- out_ndev:
- free_netdev(ndev);
+ out_priv:
+ iwm_priv_deinit(iwm);
out_wdev:
iwm_wdev_free(iwm);
@@ -148,15 +147,29 @@
void iwm_if_free(struct iwm_priv *iwm)
{
- int i;
-
if (!iwm_to_ndev(iwm))
return;
- unregister_netdev(iwm_to_ndev(iwm));
free_netdev(iwm_to_ndev(iwm));
iwm_wdev_free(iwm);
- destroy_workqueue(iwm->rx_wq);
- for (i = 0; i < IWM_TX_QUEUES; i++)
- destroy_workqueue(iwm->txq[i].wq);
+ iwm_priv_deinit(iwm);
+}
+
+int iwm_if_add(struct iwm_priv *iwm)
+{
+ struct net_device *ndev = iwm_to_ndev(iwm);
+ int ret;
+
+ ret = register_netdev(ndev);
+ if (ret < 0) {
+ dev_err(&ndev->dev, "Failed to register netdev: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+void iwm_if_remove(struct iwm_priv *iwm)
+{
+ unregister_netdev(iwm_to_ndev(iwm));
}
diff --git a/drivers/net/wireless/iwmc3200wifi/sdio.c b/drivers/net/wireless/iwmc3200wifi/sdio.c
index b54da67..9166818 100644
--- a/drivers/net/wireless/iwmc3200wifi/sdio.c
+++ b/drivers/net/wireless/iwmc3200wifi/sdio.c
@@ -454,10 +454,18 @@
INIT_WORK(&hw->isr_worker, iwm_sdio_isr_worker);
+ ret = iwm_if_add(iwm);
+ if (ret) {
+ dev_err(dev, "add SDIO interface failed\n");
+ goto destroy_wq;
+ }
+
dev_info(dev, "IWM SDIO probe\n");
return 0;
+ destroy_wq:
+ destroy_workqueue(hw->isr_wq);
debugfs_exit:
iwm_debugfs_exit(iwm);
if_free:
@@ -471,9 +479,10 @@
struct iwm_priv *iwm = hw_to_iwm(hw);
struct device *dev = &func->dev;
+ iwm_if_remove(iwm);
+ destroy_workqueue(hw->isr_wq);
iwm_debugfs_exit(iwm);
iwm_if_free(iwm);
- destroy_workqueue(hw->isr_wq);
sdio_set_drvdata(func, NULL);
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index f0e5e94..14a19ba 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -67,6 +67,7 @@
{ USB_DEVICE(0x079b, 0x0062), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x050d, 0x705c), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x083a, 0xe503), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x083a, 0xe506), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x083a, 0x4505), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0471, 0x1236), .driver_info = DEVICE_ZD1211B },
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 151bf5b..1032d5f 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -1471,11 +1471,13 @@
static void __devinit winbond_check(int io, int key)
{
- int devid, devrev, oldid, x_devid, x_devrev, x_oldid;
+ int origval, devid, devrev, oldid, x_devid, x_devrev, x_oldid;
if (!request_region(io, 3, __func__))
return;
+ origval = inb(io); /* Save original value */
+
/* First probe without key */
outb(0x20, io);
x_devid = inb(io + 1);
@@ -1495,6 +1497,8 @@
oldid = inb(io + 1);
outb(0xaa, io); /* Magic Seal */
+ outb(origval, io); /* in case we poked some entirely different hardware */
+
if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid))
goto out; /* protection against false positives */
@@ -1505,11 +1509,15 @@
static void __devinit winbond_check2(int io, int key)
{
- int devid, devrev, oldid, x_devid, x_devrev, x_oldid;
+ int origval[3], devid, devrev, oldid, x_devid, x_devrev, x_oldid;
if (!request_region(io, 3, __func__))
return;
+ origval[0] = inb(io); /* Save original values */
+ origval[1] = inb(io + 1);
+ origval[2] = inb(io + 2);
+
/* First probe without the key */
outb(0x20, io + 2);
x_devid = inb(io + 2);
@@ -1528,6 +1536,10 @@
oldid = inb(io + 2);
outb(0xaa, io); /* Magic Seal */
+ outb(origval[0], io); /* in case we poked some entirely different hardware */
+ outb(origval[1], io + 1);
+ outb(origval[2], io + 2);
+
if (x_devid == devid && x_devrev == devrev && x_oldid == oldid)
goto out; /* protection against false positives */
@@ -1538,11 +1550,13 @@
static void __devinit smsc_check(int io, int key)
{
- int id, rev, oldid, oldrev, x_id, x_rev, x_oldid, x_oldrev;
+ int origval, id, rev, oldid, oldrev, x_id, x_rev, x_oldid, x_oldrev;
if (!request_region(io, 3, __func__))
return;
+ origval = inb(io); /* Save original value */
+
/* First probe without the key */
outb(0x0d, io);
x_oldid = inb(io + 1);
@@ -1566,6 +1580,8 @@
rev = inb(io + 1);
outb(0xaa, io); /* Magic Seal */
+ outb(origval, io); /* in case we poked some entirely different hardware */
+
if (x_id == id && x_oldrev == oldrev &&
x_oldid == oldid && x_rev == rev)
goto out; /* protection against false positives */
@@ -1602,11 +1618,12 @@
static void __devinit detect_and_report_it87(void)
{
u16 dev;
- u8 r;
+ u8 origval, r;
if (verbose_probing)
printk(KERN_DEBUG "IT8705 Super-IO detection, now testing port 2E ...\n");
- if (!request_region(0x2e, 1, __func__))
+ if (!request_region(0x2e, 2, __func__))
return;
+ origval = inb(0x2e); /* Save original value */
outb(0x87, 0x2e);
outb(0x01, 0x2e);
outb(0x55, 0x2e);
@@ -1626,8 +1643,10 @@
outb(r | 8, 0x2F);
outb(0x02, 0x2E); /* Lock */
outb(0x02, 0x2F);
+ } else {
+ outb(origval, 0x2e); /* Oops, sorry to disturb */
}
- release_region(0x2e, 1);
+ release_region(0x2e, 2);
}
#endif /* CONFIG_PARPORT_PC_SUPERIO */
@@ -2271,6 +2290,9 @@
if (IS_ERR(pdev))
return NULL;
dev = &pdev->dev;
+
+ dev->coherent_dma_mask = DMA_BIT_MASK(24);
+ dev->dma_mask = &dev->coherent_dma_mask;
}
ops = kmalloc(sizeof(struct parport_operations), GFP_KERNEL);
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index b77ae67..1ebd6b4 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -2,10 +2,11 @@
# Makefile for the PCI bus specific drivers.
#
-obj-y += access.o bus.o probe.o remove.o pci.o quirks.o slot.o \
+obj-y += access.o bus.o probe.o remove.o pci.o quirks.o \
pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \
irq.o
obj-$(CONFIG_PROC_FS) += proc.o
+obj-$(CONFIG_SYSFS) += slot.o
# Build PCI Express stuff if needed
obj-$(CONFIG_PCIEPORTBUS) += pcie/
diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index 0f37065..db23200 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -66,6 +66,25 @@
EXPORT_SYMBOL(pci_bus_write_config_word);
EXPORT_SYMBOL(pci_bus_write_config_dword);
+/**
+ * pci_bus_set_ops - Set raw operations of pci bus
+ * @bus: pci bus struct
+ * @ops: new raw operations
+ *
+ * Return previous raw operations
+ */
+struct pci_ops *pci_bus_set_ops(struct pci_bus *bus, struct pci_ops *ops)
+{
+ struct pci_ops *old_ops;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pci_lock, flags);
+ old_ops = bus->ops;
+ bus->ops = ops;
+ spin_unlock_irqrestore(&pci_lock, flags);
+ return old_ops;
+}
+EXPORT_SYMBOL(pci_bus_set_ops);
/**
* pci_read_vpd - Read one entry from Vital Product Data
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 97a8194..cef28a7 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -41,9 +41,14 @@
void *alignf_data)
{
int i, ret = -ENOMEM;
+ resource_size_t max = -1;
type_mask |= IORESOURCE_IO | IORESOURCE_MEM;
+ /* don't allocate too high if the pref mem doesn't support 64bit*/
+ if (!(res->flags & IORESOURCE_MEM_64))
+ max = PCIBIOS_MAX_MEM_32;
+
for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
struct resource *r = bus->resource[i];
if (!r)
@@ -62,7 +67,7 @@
/* Ok, try it out.. */
ret = allocate_resource(r, res, size,
r->start ? : min,
- -1, align,
+ max, align,
alignf, alignf_data);
if (ret == 0)
break;
@@ -201,13 +206,18 @@
* Walk the given bus, including any bridged devices
* on buses under this bus. Call the provided callback
* on each device found.
+ *
+ * We check the return of @cb each time. If it returns anything
+ * other than 0, we break out.
+ *
*/
-void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *),
+void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
void *userdata)
{
struct pci_dev *dev;
struct pci_bus *bus;
struct list_head *next;
+ int retval;
bus = top;
down_read(&pci_bus_sem);
@@ -231,8 +241,10 @@
/* Run device routines with the device locked */
down(&dev->dev.sem);
- cb(dev, userdata);
+ retval = cb(dev, userdata);
up(&dev->dev.sem);
+ if (retval)
+ break;
}
up_read(&pci_bus_sem);
}
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index 9aa4fe1..66f29bc 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -4,7 +4,7 @@
menuconfig HOTPLUG_PCI
tristate "Support for PCI Hotplug"
- depends on PCI && HOTPLUG
+ depends on PCI && HOTPLUG && SYSFS
---help---
Say Y here if you have a motherboard with a PCI Hotplug controller.
This allows you to add and remove PCI cards while the machine is
@@ -41,7 +41,7 @@
config HOTPLUG_PCI_COMPAQ
tristate "Compaq PCI Hotplug driver"
- depends on X86 && PCI_BIOS && PCI_LEGACY
+ depends on X86 && PCI_BIOS
help
Say Y here if you have a motherboard with a Compaq PCI Hotplug
controller.
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index 43c10bd..4dd7114 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -77,7 +77,6 @@
static int get_adapter_status (struct hotplug_slot *slot, u8 *value);
static struct hotplug_slot_ops acpi_hotplug_slot_ops = {
- .owner = THIS_MODULE,
.enable_slot = enable_slot,
.disable_slot = disable_slot,
.set_attention_status = set_attention_status,
diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c
index de94f4f..a5b9f6a 100644
--- a/drivers/pci/hotplug/cpci_hotplug_core.c
+++ b/drivers/pci/hotplug/cpci_hotplug_core.c
@@ -72,7 +72,6 @@
static int get_latch_status(struct hotplug_slot *slot, u8 * value);
static struct hotplug_slot_ops cpci_hotplug_slot_ops = {
- .owner = THIS_MODULE,
.enable_slot = enable_slot,
.disable_slot = disable_slot,
.set_attention_status = set_attention_status,
diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h
index afaf8f6..5383600 100644
--- a/drivers/pci/hotplug/cpqphp.h
+++ b/drivers/pci/hotplug/cpqphp.h
@@ -150,25 +150,25 @@
/* offsets to the controller registers based on the above structure layout */
enum ctrl_offsets {
- SLOT_RST = offsetof(struct ctrl_reg, slot_RST),
+ SLOT_RST = offsetof(struct ctrl_reg, slot_RST),
SLOT_ENABLE = offsetof(struct ctrl_reg, slot_enable),
MISC = offsetof(struct ctrl_reg, misc),
LED_CONTROL = offsetof(struct ctrl_reg, led_control),
INT_INPUT_CLEAR = offsetof(struct ctrl_reg, int_input_clear),
- INT_MASK = offsetof(struct ctrl_reg, int_mask),
- CTRL_RESERVED0 = offsetof(struct ctrl_reg, reserved0),
+ INT_MASK = offsetof(struct ctrl_reg, int_mask),
+ CTRL_RESERVED0 = offsetof(struct ctrl_reg, reserved0),
CTRL_RESERVED1 = offsetof(struct ctrl_reg, reserved1),
CTRL_RESERVED2 = offsetof(struct ctrl_reg, reserved1),
- GEN_OUTPUT_AB = offsetof(struct ctrl_reg, gen_output_AB),
- NON_INT_INPUT = offsetof(struct ctrl_reg, non_int_input),
+ GEN_OUTPUT_AB = offsetof(struct ctrl_reg, gen_output_AB),
+ NON_INT_INPUT = offsetof(struct ctrl_reg, non_int_input),
CTRL_RESERVED3 = offsetof(struct ctrl_reg, reserved3),
CTRL_RESERVED4 = offsetof(struct ctrl_reg, reserved4),
CTRL_RESERVED5 = offsetof(struct ctrl_reg, reserved5),
CTRL_RESERVED6 = offsetof(struct ctrl_reg, reserved6),
CTRL_RESERVED7 = offsetof(struct ctrl_reg, reserved7),
CTRL_RESERVED8 = offsetof(struct ctrl_reg, reserved8),
- SLOT_MASK = offsetof(struct ctrl_reg, slot_mask),
- CTRL_RESERVED9 = offsetof(struct ctrl_reg, reserved9),
+ SLOT_MASK = offsetof(struct ctrl_reg, slot_mask),
+ CTRL_RESERVED9 = offsetof(struct ctrl_reg, reserved9),
CTRL_RESERVED10 = offsetof(struct ctrl_reg, reserved10),
CTRL_RESERVED11 = offsetof(struct ctrl_reg, reserved11),
SLOT_SERR = offsetof(struct ctrl_reg, slot_SERR),
@@ -190,7 +190,9 @@
u32 reserved2;
} __attribute__ ((packed));
-/* offsets to the hotplug resource table registers based on the above structure layout */
+/* offsets to the hotplug resource table registers based on the above
+ * structure layout
+ */
enum hrt_offsets {
SIG0 = offsetof(struct hrt, sig0),
SIG1 = offsetof(struct hrt, sig1),
@@ -217,18 +219,20 @@
u16 pre_mem_length;
} __attribute__ ((packed));
-/* offsets to the hotplug slot resource table registers based on the above structure layout */
+/* offsets to the hotplug slot resource table registers based on the above
+ * structure layout
+ */
enum slot_rt_offsets {
DEV_FUNC = offsetof(struct slot_rt, dev_func),
- PRIMARY_BUS = offsetof(struct slot_rt, primary_bus),
- SECONDARY_BUS = offsetof(struct slot_rt, secondary_bus),
- MAX_BUS = offsetof(struct slot_rt, max_bus),
- IO_BASE = offsetof(struct slot_rt, io_base),
- IO_LENGTH = offsetof(struct slot_rt, io_length),
- MEM_BASE = offsetof(struct slot_rt, mem_base),
- MEM_LENGTH = offsetof(struct slot_rt, mem_length),
- PRE_MEM_BASE = offsetof(struct slot_rt, pre_mem_base),
- PRE_MEM_LENGTH = offsetof(struct slot_rt, pre_mem_length),
+ PRIMARY_BUS = offsetof(struct slot_rt, primary_bus),
+ SECONDARY_BUS = offsetof(struct slot_rt, secondary_bus),
+ MAX_BUS = offsetof(struct slot_rt, max_bus),
+ IO_BASE = offsetof(struct slot_rt, io_base),
+ IO_LENGTH = offsetof(struct slot_rt, io_length),
+ MEM_BASE = offsetof(struct slot_rt, mem_base),
+ MEM_LENGTH = offsetof(struct slot_rt, mem_length),
+ PRE_MEM_BASE = offsetof(struct slot_rt, pre_mem_base),
+ PRE_MEM_LENGTH = offsetof(struct slot_rt, pre_mem_length),
};
struct pci_func {
@@ -286,8 +290,8 @@
struct controller {
struct controller *next;
u32 ctrl_int_comp;
- struct mutex crit_sect; /* critical section mutex */
- void __iomem *hpc_reg; /* cookie for our pci controller location */
+ struct mutex crit_sect; /* critical section mutex */
+ void __iomem *hpc_reg; /* cookie for our pci controller location */
struct pci_resource *mem_head;
struct pci_resource *p_mem_head;
struct pci_resource *io_head;
@@ -299,7 +303,7 @@
u8 next_event;
u8 interrupt;
u8 cfgspc_irq;
- u8 bus; /* bus number for the pci hotplug controller */
+ u8 bus; /* bus number for the pci hotplug controller */
u8 rev;
u8 slot_device_offset;
u8 first_slot;
@@ -401,46 +405,57 @@
/* debugfs functions for the hotplug controller info */
-extern void cpqhp_initialize_debugfs (void);
-extern void cpqhp_shutdown_debugfs (void);
-extern void cpqhp_create_debugfs_files (struct controller *ctrl);
-extern void cpqhp_remove_debugfs_files (struct controller *ctrl);
+extern void cpqhp_initialize_debugfs(void);
+extern void cpqhp_shutdown_debugfs(void);
+extern void cpqhp_create_debugfs_files(struct controller *ctrl);
+extern void cpqhp_remove_debugfs_files(struct controller *ctrl);
/* controller functions */
-extern void cpqhp_pushbutton_thread (unsigned long event_pointer);
-extern irqreturn_t cpqhp_ctrl_intr (int IRQ, void *data);
-extern int cpqhp_find_available_resources (struct controller *ctrl, void __iomem *rom_start);
-extern int cpqhp_event_start_thread (void);
-extern void cpqhp_event_stop_thread (void);
-extern struct pci_func *cpqhp_slot_create (unsigned char busnumber);
-extern struct pci_func *cpqhp_slot_find (unsigned char bus, unsigned char device, unsigned char index);
-extern int cpqhp_process_SI (struct controller *ctrl, struct pci_func *func);
-extern int cpqhp_process_SS (struct controller *ctrl, struct pci_func *func);
-extern int cpqhp_hardware_test (struct controller *ctrl, int test_num);
+extern void cpqhp_pushbutton_thread(unsigned long event_pointer);
+extern irqreturn_t cpqhp_ctrl_intr(int IRQ, void *data);
+extern int cpqhp_find_available_resources(struct controller *ctrl,
+ void __iomem *rom_start);
+extern int cpqhp_event_start_thread(void);
+extern void cpqhp_event_stop_thread(void);
+extern struct pci_func *cpqhp_slot_create(unsigned char busnumber);
+extern struct pci_func *cpqhp_slot_find(unsigned char bus, unsigned char device,
+ unsigned char index);
+extern int cpqhp_process_SI(struct controller *ctrl, struct pci_func *func);
+extern int cpqhp_process_SS(struct controller *ctrl, struct pci_func *func);
+extern int cpqhp_hardware_test(struct controller *ctrl, int test_num);
/* resource functions */
extern int cpqhp_resource_sort_and_combine (struct pci_resource **head);
/* pci functions */
-extern int cpqhp_set_irq (u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num);
-extern int cpqhp_get_bus_dev (struct controller *ctrl, u8 *bus_num, u8 *dev_num, u8 slot);
-extern int cpqhp_save_config (struct controller *ctrl, int busnumber, int is_hot_plug);
-extern int cpqhp_save_base_addr_length (struct controller *ctrl, struct pci_func * func);
-extern int cpqhp_save_used_resources (struct controller *ctrl, struct pci_func * func);
-extern int cpqhp_configure_board (struct controller *ctrl, struct pci_func * func);
-extern int cpqhp_save_slot_config (struct controller *ctrl, struct pci_func * new_slot);
-extern int cpqhp_valid_replace (struct controller *ctrl, struct pci_func * func);
-extern void cpqhp_destroy_board_resources (struct pci_func * func);
-extern int cpqhp_return_board_resources (struct pci_func * func, struct resource_lists * resources);
-extern void cpqhp_destroy_resource_list (struct resource_lists * resources);
-extern int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func);
-extern int cpqhp_unconfigure_device (struct pci_func* func);
+extern int cpqhp_set_irq(u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num);
+extern int cpqhp_get_bus_dev(struct controller *ctrl, u8 *bus_num, u8 *dev_num,
+ u8 slot);
+extern int cpqhp_save_config(struct controller *ctrl, int busnumber,
+ int is_hot_plug);
+extern int cpqhp_save_base_addr_length(struct controller *ctrl,
+ struct pci_func *func);
+extern int cpqhp_save_used_resources(struct controller *ctrl,
+ struct pci_func *func);
+extern int cpqhp_configure_board(struct controller *ctrl,
+ struct pci_func *func);
+extern int cpqhp_save_slot_config(struct controller *ctrl,
+ struct pci_func *new_slot);
+extern int cpqhp_valid_replace(struct controller *ctrl, struct pci_func *func);
+extern void cpqhp_destroy_board_resources(struct pci_func *func);
+extern int cpqhp_return_board_resources (struct pci_func *func,
+ struct resource_lists *resources);
+extern void cpqhp_destroy_resource_list(struct resource_lists *resources);
+extern int cpqhp_configure_device(struct controller *ctrl,
+ struct pci_func *func);
+extern int cpqhp_unconfigure_device(struct pci_func *func);
/* Global variables */
extern int cpqhp_debug;
extern int cpqhp_legacy_mode;
extern struct controller *cpqhp_ctrl_list;
extern struct pci_func *cpqhp_slot_list[256];
+extern struct irq_routing_table *cpqhp_routing_table;
/* these can be gotten rid of, but for debugging they are purty */
extern u8 cpqhp_nic_irq;
@@ -449,7 +464,7 @@
/* inline functions */
-static inline char *slot_name(struct slot *slot)
+static inline const char *slot_name(struct slot *slot)
{
return hotplug_slot_name(slot->hotplug_slot);
}
@@ -458,9 +473,9 @@
* return_resource
*
* Puts node back in the resource list pointed to by head
- *
*/
-static inline void return_resource(struct pci_resource **head, struct pci_resource *node)
+static inline void return_resource(struct pci_resource **head,
+ struct pci_resource *node)
{
if (!node || !head)
return;
@@ -471,7 +486,7 @@
static inline void set_SOGO(struct controller *ctrl)
{
u16 misc;
-
+
misc = readw(ctrl->hpc_reg + MISC);
misc = (misc | 0x0001) & 0xFFFB;
writew(misc, ctrl->hpc_reg + MISC);
@@ -481,7 +496,7 @@
static inline void amber_LED_on(struct controller *ctrl, u8 slot)
{
u32 led_control;
-
+
led_control = readl(ctrl->hpc_reg + LED_CONTROL);
led_control |= (0x01010000L << slot);
writel(led_control, ctrl->hpc_reg + LED_CONTROL);
@@ -491,7 +506,7 @@
static inline void amber_LED_off(struct controller *ctrl, u8 slot)
{
u32 led_control;
-
+
led_control = readl(ctrl->hpc_reg + LED_CONTROL);
led_control &= ~(0x01010000L << slot);
writel(led_control, ctrl->hpc_reg + LED_CONTROL);
@@ -504,7 +519,7 @@
led_control = readl(ctrl->hpc_reg + LED_CONTROL);
led_control &= (0x01010000L << slot);
-
+
return led_control ? 1 : 0;
}
@@ -512,7 +527,7 @@
static inline void green_LED_on(struct controller *ctrl, u8 slot)
{
u32 led_control;
-
+
led_control = readl(ctrl->hpc_reg + LED_CONTROL);
led_control |= 0x0101L << slot;
writel(led_control, ctrl->hpc_reg + LED_CONTROL);
@@ -521,7 +536,7 @@
static inline void green_LED_off(struct controller *ctrl, u8 slot)
{
u32 led_control;
-
+
led_control = readl(ctrl->hpc_reg + LED_CONTROL);
led_control &= ~(0x0101L << slot);
writel(led_control, ctrl->hpc_reg + LED_CONTROL);
@@ -531,7 +546,7 @@
static inline void green_LED_blink(struct controller *ctrl, u8 slot)
{
u32 led_control;
-
+
led_control = readl(ctrl->hpc_reg + LED_CONTROL);
led_control &= ~(0x0101L << slot);
led_control |= (0x0001L << slot);
@@ -575,22 +590,21 @@
}
-/*
+/**
* get_controller_speed - find the current frequency/mode of controller.
*
* @ctrl: controller to get frequency/mode for.
*
* Returns controller speed.
- *
*/
static inline u8 get_controller_speed(struct controller *ctrl)
{
u8 curr_freq;
- u16 misc;
-
+ u16 misc;
+
if (ctrl->pcix_support) {
curr_freq = readb(ctrl->hpc_reg + NEXT_CURR_FREQ);
- if ((curr_freq & 0xB0) == 0xB0)
+ if ((curr_freq & 0xB0) == 0xB0)
return PCI_SPEED_133MHz_PCIX;
if ((curr_freq & 0xA0) == 0xA0)
return PCI_SPEED_100MHz_PCIX;
@@ -602,19 +616,18 @@
return PCI_SPEED_33MHz;
}
- misc = readw(ctrl->hpc_reg + MISC);
- return (misc & 0x0800) ? PCI_SPEED_66MHz : PCI_SPEED_33MHz;
+ misc = readw(ctrl->hpc_reg + MISC);
+ return (misc & 0x0800) ? PCI_SPEED_66MHz : PCI_SPEED_33MHz;
}
-
-/*
+
+/**
* get_adapter_speed - find the max supported frequency/mode of adapter.
*
* @ctrl: hotplug controller.
* @hp_slot: hotplug slot where adapter is installed.
*
* Returns adapter speed.
- *
*/
static inline u8 get_adapter_speed(struct controller *ctrl, u8 hp_slot)
{
@@ -672,7 +685,8 @@
}
-static inline int cpq_get_latch_status(struct controller *ctrl, struct slot *slot)
+static inline int cpq_get_latch_status(struct controller *ctrl,
+ struct slot *slot)
{
u32 status;
u8 hp_slot;
@@ -687,7 +701,8 @@
}
-static inline int get_presence_status(struct controller *ctrl, struct slot *slot)
+static inline int get_presence_status(struct controller *ctrl,
+ struct slot *slot)
{
int presence_save = 0;
u8 hp_slot;
@@ -696,7 +711,8 @@
hp_slot = slot->device - ctrl->slot_device_offset;
tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
- presence_save = (int) ((((~tempdword) >> 23) | ((~tempdword) >> 15)) >> hp_slot) & 0x02;
+ presence_save = (int) ((((~tempdword) >> 23) | ((~tempdword) >> 15))
+ >> hp_slot) & 0x02;
return presence_save;
}
@@ -718,5 +734,12 @@
return retval;
}
-#endif
+#include <asm/pci_x86.h>
+static inline int cpqhp_routing_table_length(void)
+{
+ BUG_ON(cpqhp_routing_table == NULL);
+ return ((cpqhp_routing_table->size - sizeof(struct irq_routing_table)) /
+ sizeof(struct irq_info));
+}
+#endif
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index c2e1bcb..075b4f4 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -25,8 +25,7 @@
* Send feedback to <greg@kroah.com>
*
* Jan 12, 2003 - Added 66/100/133MHz PCI-X support,
- * Torben Mathiasen <torben.mathiasen@hp.com>
- *
+ * Torben Mathiasen <torben.mathiasen@hp.com>
*/
#include <linux/module.h>
@@ -45,7 +44,6 @@
#include "cpqphp.h"
#include "cpqphp_nvram.h"
-#include <asm/pci_x86.h>
/* Global variables */
@@ -53,6 +51,7 @@
int cpqhp_legacy_mode;
struct controller *cpqhp_ctrl_list; /* = NULL */
struct pci_func *cpqhp_slot_list[256];
+struct irq_routing_table *cpqhp_routing_table;
/* local variables */
static void __iomem *smbios_table;
@@ -78,33 +77,6 @@
#define CPQHPC_MODULE_MINOR 208
-static int one_time_init (void);
-static int set_attention_status (struct hotplug_slot *slot, u8 value);
-static int process_SI (struct hotplug_slot *slot);
-static int process_SS (struct hotplug_slot *slot);
-static int hardware_test (struct hotplug_slot *slot, u32 value);
-static int get_power_status (struct hotplug_slot *slot, u8 *value);
-static int get_attention_status (struct hotplug_slot *slot, u8 *value);
-static int get_latch_status (struct hotplug_slot *slot, u8 *value);
-static int get_adapter_status (struct hotplug_slot *slot, u8 *value);
-static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
-static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
-
-static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
- .owner = THIS_MODULE,
- .set_attention_status = set_attention_status,
- .enable_slot = process_SI,
- .disable_slot = process_SS,
- .hardware_test = hardware_test,
- .get_power_status = get_power_status,
- .get_attention_status = get_attention_status,
- .get_latch_status = get_latch_status,
- .get_adapter_status = get_adapter_status,
- .get_max_bus_speed = get_max_bus_speed,
- .get_cur_bus_speed = get_cur_bus_speed,
-};
-
-
static inline int is_slot64bit(struct slot *slot)
{
return (readb(slot->p_sm_slot + SMBIOS_SLOT_WIDTH) == 0x06) ? 1 : 0;
@@ -144,7 +116,7 @@
break;
}
}
-
+
if (!status)
fp = NULL;
@@ -171,7 +143,7 @@
tempdword = ctrl->first_slot;
number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
- // Loop through slots
+ /* Loop through slots */
while (number_of_slots) {
physical_slot = tempdword;
writeb(0, ctrl->hpc_reg + SLOT_SERR);
@@ -182,41 +154,42 @@
return 0;
}
-
-/* nice debugging output */
-static int pci_print_IRQ_route (void)
+static int init_cpqhp_routing_table(void)
{
- struct irq_routing_table *routing_table;
int len;
- int loop;
- u8 tbus, tdevice, tslot;
-
- routing_table = pcibios_get_irq_routing_table();
- if (routing_table == NULL) {
- err("No BIOS Routing Table??? Not good\n");
+ cpqhp_routing_table = pcibios_get_irq_routing_table();
+ if (cpqhp_routing_table == NULL)
return -ENOMEM;
- }
- len = (routing_table->size - sizeof(struct irq_routing_table)) /
- sizeof(struct irq_info);
- // Make sure I got at least one entry
+ len = cpqhp_routing_table_length();
if (len == 0) {
- kfree(routing_table);
+ kfree(cpqhp_routing_table);
+ cpqhp_routing_table = NULL;
return -1;
}
- dbg("bus dev func slot\n");
+ return 0;
+}
+/* nice debugging output */
+static void pci_print_IRQ_route(void)
+{
+ int len;
+ int loop;
+ u8 tbus, tdevice, tslot;
+
+ len = cpqhp_routing_table_length();
+
+ dbg("bus dev func slot\n");
for (loop = 0; loop < len; ++loop) {
- tbus = routing_table->slots[loop].bus;
- tdevice = routing_table->slots[loop].devfn;
- tslot = routing_table->slots[loop].slot;
+ tbus = cpqhp_routing_table->slots[loop].bus;
+ tdevice = cpqhp_routing_table->slots[loop].devfn;
+ tslot = cpqhp_routing_table->slots[loop].slot;
dbg("%d %d %d %d\n", tbus, tdevice >> 3, tdevice & 0x7, tslot);
}
- kfree(routing_table);
- return 0;
+ return;
}
@@ -242,9 +215,9 @@
void __iomem *p_max;
if (!smbios_table || !curr)
- return(NULL);
+ return NULL;
- // set p_max to the end of the table
+ /* set p_max to the end of the table */
p_max = smbios_start + readw(smbios_table + ST_LENGTH);
p_temp = curr;
@@ -253,20 +226,19 @@
while ((p_temp < p_max) && !bail) {
/* Look for the double NULL terminator
* The first condition is the previous byte
- * and the second is the curr */
- if (!previous_byte && !(readb(p_temp))) {
+ * and the second is the curr
+ */
+ if (!previous_byte && !(readb(p_temp)))
bail = 1;
- }
previous_byte = readb(p_temp);
p_temp++;
}
- if (p_temp < p_max) {
+ if (p_temp < p_max)
return p_temp;
- } else {
+ else
return NULL;
- }
}
@@ -292,21 +264,18 @@
if (!smbios_table)
return NULL;
- if (!previous) {
+ if (!previous)
previous = smbios_start;
- } else {
+ else
previous = get_subsequent_smbios_entry(smbios_start,
smbios_table, previous);
- }
- while (previous) {
- if (readb(previous + SMBIOS_GENERIC_TYPE) != type) {
+ while (previous)
+ if (readb(previous + SMBIOS_GENERIC_TYPE) != type)
previous = get_subsequent_smbios_entry(smbios_start,
smbios_table, previous);
- } else {
+ else
break;
- }
- }
return previous;
}
@@ -322,144 +291,6 @@
kfree(slot);
}
-#define SLOT_NAME_SIZE 10
-
-static int ctrl_slot_setup(struct controller *ctrl,
- void __iomem *smbios_start,
- void __iomem *smbios_table)
-{
- struct slot *slot;
- struct hotplug_slot *hotplug_slot;
- struct hotplug_slot_info *hotplug_slot_info;
- u8 number_of_slots;
- u8 slot_device;
- u8 slot_number;
- u8 ctrl_slot;
- u32 tempdword;
- char name[SLOT_NAME_SIZE];
- void __iomem *slot_entry= NULL;
- int result = -ENOMEM;
-
- dbg("%s\n", __func__);
-
- tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
-
- number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
- slot_device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
- slot_number = ctrl->first_slot;
-
- while (number_of_slots) {
- slot = kzalloc(sizeof(*slot), GFP_KERNEL);
- if (!slot)
- goto error;
-
- slot->hotplug_slot = kzalloc(sizeof(*(slot->hotplug_slot)),
- GFP_KERNEL);
- if (!slot->hotplug_slot)
- goto error_slot;
- hotplug_slot = slot->hotplug_slot;
-
- hotplug_slot->info =
- kzalloc(sizeof(*(hotplug_slot->info)),
- GFP_KERNEL);
- if (!hotplug_slot->info)
- goto error_hpslot;
- hotplug_slot_info = hotplug_slot->info;
-
- slot->ctrl = ctrl;
- slot->bus = ctrl->bus;
- slot->device = slot_device;
- slot->number = slot_number;
- dbg("slot->number = %u\n", slot->number);
-
- slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9,
- slot_entry);
-
- while (slot_entry && (readw(slot_entry + SMBIOS_SLOT_NUMBER) !=
- slot->number)) {
- slot_entry = get_SMBIOS_entry(smbios_start,
- smbios_table, 9, slot_entry);
- }
-
- slot->p_sm_slot = slot_entry;
-
- init_timer(&slot->task_event);
- slot->task_event.expires = jiffies + 5 * HZ;
- slot->task_event.function = cpqhp_pushbutton_thread;
-
- //FIXME: these capabilities aren't used but if they are
- // they need to be correctly implemented
- slot->capabilities |= PCISLOT_REPLACE_SUPPORTED;
- slot->capabilities |= PCISLOT_INTERLOCK_SUPPORTED;
-
- if (is_slot64bit(slot))
- slot->capabilities |= PCISLOT_64_BIT_SUPPORTED;
- if (is_slot66mhz(slot))
- slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED;
- if (ctrl->speed == PCI_SPEED_66MHz)
- slot->capabilities |= PCISLOT_66_MHZ_OPERATION;
-
- ctrl_slot =
- slot_device - (readb(ctrl->hpc_reg + SLOT_MASK) >> 4);
-
- // Check presence
- slot->capabilities |=
- ((((~tempdword) >> 23) |
- ((~tempdword) >> 15)) >> ctrl_slot) & 0x02;
- // Check the switch state
- slot->capabilities |=
- ((~tempdword & 0xFF) >> ctrl_slot) & 0x01;
- // Check the slot enable
- slot->capabilities |=
- ((read_slot_enable(ctrl) << 2) >> ctrl_slot) & 0x04;
-
- /* register this slot with the hotplug pci core */
- hotplug_slot->release = &release_slot;
- hotplug_slot->private = slot;
- snprintf(name, SLOT_NAME_SIZE, "%u", slot->number);
- hotplug_slot->ops = &cpqphp_hotplug_slot_ops;
-
- hotplug_slot_info->power_status = get_slot_enabled(ctrl, slot);
- hotplug_slot_info->attention_status =
- cpq_get_attention_status(ctrl, slot);
- hotplug_slot_info->latch_status =
- cpq_get_latch_status(ctrl, slot);
- hotplug_slot_info->adapter_status =
- get_presence_status(ctrl, slot);
-
- dbg("registering bus %d, dev %d, number %d, "
- "ctrl->slot_device_offset %d, slot %d\n",
- slot->bus, slot->device,
- slot->number, ctrl->slot_device_offset,
- slot_number);
- result = pci_hp_register(hotplug_slot,
- ctrl->pci_dev->bus,
- slot->device,
- name);
- if (result) {
- err("pci_hp_register failed with error %d\n", result);
- goto error_info;
- }
-
- slot->next = ctrl->slot;
- ctrl->slot = slot;
-
- number_of_slots--;
- slot_device++;
- slot_number++;
- }
-
- return 0;
-error_info:
- kfree(hotplug_slot_info);
-error_hpslot:
- kfree(hotplug_slot);
-error_slot:
- kfree(slot);
-error:
- return result;
-}
-
static int ctrl_slot_cleanup (struct controller * ctrl)
{
struct slot *old_slot, *next_slot;
@@ -476,36 +307,32 @@
cpqhp_remove_debugfs_files(ctrl);
- //Free IRQ associated with hot plug device
+ /* Free IRQ associated with hot plug device */
free_irq(ctrl->interrupt, ctrl);
- //Unmap the memory
+ /* Unmap the memory */
iounmap(ctrl->hpc_reg);
- //Finally reclaim PCI mem
+ /* Finally reclaim PCI mem */
release_mem_region(pci_resource_start(ctrl->pci_dev, 0),
pci_resource_len(ctrl->pci_dev, 0));
- return(0);
+ return 0;
}
-//============================================================================
-// function: get_slot_mapping
-//
-// Description: Attempts to determine a logical slot mapping for a PCI
-// device. Won't work for more than one PCI-PCI bridge
-// in a slot.
-//
-// Input: u8 bus_num - bus number of PCI device
-// u8 dev_num - device number of PCI device
-// u8 *slot - Pointer to u8 where slot number will
-// be returned
-//
-// Output: SUCCESS or FAILURE
-//=============================================================================
+/**
+ * get_slot_mapping - determine logical slot mapping for PCI device
+ *
+ * Won't work for more than one PCI-PCI bridge in a slot.
+ *
+ * @bus_num - bus number of PCI device
+ * @dev_num - device number of PCI device
+ * @slot - Pointer to u8 where slot number will be returned
+ *
+ * Output: SUCCESS or FAILURE
+ */
static int
get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot)
{
- struct irq_routing_table *PCIIRQRoutingInfoLength;
u32 work;
long len;
long loop;
@@ -516,36 +343,25 @@
bridgeSlot = 0xFF;
- PCIIRQRoutingInfoLength = pcibios_get_irq_routing_table();
- if (!PCIIRQRoutingInfoLength)
- return -1;
-
- len = (PCIIRQRoutingInfoLength->size -
- sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
- // Make sure I got at least one entry
- if (len == 0) {
- kfree(PCIIRQRoutingInfoLength);
- return -1;
- }
-
+ len = cpqhp_routing_table_length();
for (loop = 0; loop < len; ++loop) {
- tbus = PCIIRQRoutingInfoLength->slots[loop].bus;
- tdevice = PCIIRQRoutingInfoLength->slots[loop].devfn >> 3;
- tslot = PCIIRQRoutingInfoLength->slots[loop].slot;
+ tbus = cpqhp_routing_table->slots[loop].bus;
+ tdevice = cpqhp_routing_table->slots[loop].devfn >> 3;
+ tslot = cpqhp_routing_table->slots[loop].slot;
if ((tbus == bus_num) && (tdevice == dev_num)) {
*slot = tslot;
- kfree(PCIIRQRoutingInfoLength);
return 0;
} else {
/* Did not get a match on the target PCI device. Check
- * if the current IRQ table entry is a PCI-to-PCI bridge
- * device. If so, and it's secondary bus matches the
- * bus number for the target device, I need to save the
- * bridge's slot number. If I can not find an entry for
- * the target device, I will have to assume it's on the
- * other side of the bridge, and assign it the bridge's
- * slot. */
+ * if the current IRQ table entry is a PCI-to-PCI
+ * bridge device. If so, and it's secondary bus
+ * matches the bus number for the target device, I need
+ * to save the bridge's slot number. If I can not find
+ * an entry for the target device, I will have to
+ * assume it's on the other side of the bridge, and
+ * assign it the bridge's slot.
+ */
bus->number = tbus;
pci_bus_read_config_dword(bus, PCI_DEVFN(tdevice, 0),
PCI_CLASS_REVISION, &work);
@@ -555,25 +371,23 @@
PCI_DEVFN(tdevice, 0),
PCI_PRIMARY_BUS, &work);
// See if bridge's secondary bus matches target bus.
- if (((work >> 8) & 0x000000FF) == (long) bus_num) {
+ if (((work >> 8) & 0x000000FF) == (long) bus_num)
bridgeSlot = tslot;
- }
}
}
}
- // If we got here, we didn't find an entry in the IRQ mapping table
- // for the target PCI device. If we did determine that the target
- // device is on the other side of a PCI-to-PCI bridge, return the
- // slot number for the bridge.
+ /* If we got here, we didn't find an entry in the IRQ mapping table for
+ * the target PCI device. If we did determine that the target device
+ * is on the other side of a PCI-to-PCI bridge, return the slot number
+ * for the bridge.
+ */
if (bridgeSlot != 0xFF) {
*slot = bridgeSlot;
- kfree(PCIIRQRoutingInfoLength);
return 0;
}
- kfree(PCIIRQRoutingInfoLength);
- // Couldn't find an entry in the routing table for this PCI device
+ /* Couldn't find an entry in the routing table for this PCI device */
return -1;
}
@@ -591,32 +405,32 @@
u8 hp_slot;
if (func == NULL)
- return(1);
+ return 1;
hp_slot = func->device - ctrl->slot_device_offset;
- // Wait for exclusive access to hardware
+ /* Wait for exclusive access to hardware */
mutex_lock(&ctrl->crit_sect);
- if (status == 1) {
+ if (status == 1)
amber_LED_on (ctrl, hp_slot);
- } else if (status == 0) {
+ else if (status == 0)
amber_LED_off (ctrl, hp_slot);
- } else {
- // Done with exclusive hardware access
+ else {
+ /* Done with exclusive hardware access */
mutex_unlock(&ctrl->crit_sect);
- return(1);
+ return 1;
}
set_SOGO(ctrl);
- // Wait for SOBS to be unset
+ /* Wait for SOBS to be unset */
wait_for_ctrl_irq (ctrl);
- // Done with exclusive hardware access
+ /* Done with exclusive hardware access */
mutex_unlock(&ctrl->crit_sect);
- return(0);
+ return 0;
}
@@ -719,7 +533,7 @@
dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
- return cpqhp_hardware_test(ctrl, value);
+ return cpqhp_hardware_test(ctrl, value);
}
@@ -738,7 +552,7 @@
{
struct slot *slot = hotplug_slot->private;
struct controller *ctrl = slot->ctrl;
-
+
dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
*value = cpq_get_attention_status(ctrl, slot);
@@ -793,6 +607,230 @@
return 0;
}
+static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
+ .set_attention_status = set_attention_status,
+ .enable_slot = process_SI,
+ .disable_slot = process_SS,
+ .hardware_test = hardware_test,
+ .get_power_status = get_power_status,
+ .get_attention_status = get_attention_status,
+ .get_latch_status = get_latch_status,
+ .get_adapter_status = get_adapter_status,
+ .get_max_bus_speed = get_max_bus_speed,
+ .get_cur_bus_speed = get_cur_bus_speed,
+};
+
+#define SLOT_NAME_SIZE 10
+
+static int ctrl_slot_setup(struct controller *ctrl,
+ void __iomem *smbios_start,
+ void __iomem *smbios_table)
+{
+ struct slot *slot;
+ struct hotplug_slot *hotplug_slot;
+ struct hotplug_slot_info *hotplug_slot_info;
+ u8 number_of_slots;
+ u8 slot_device;
+ u8 slot_number;
+ u8 ctrl_slot;
+ u32 tempdword;
+ char name[SLOT_NAME_SIZE];
+ void __iomem *slot_entry= NULL;
+ int result = -ENOMEM;
+
+ dbg("%s\n", __func__);
+
+ tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
+
+ number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
+ slot_device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
+ slot_number = ctrl->first_slot;
+
+ while (number_of_slots) {
+ slot = kzalloc(sizeof(*slot), GFP_KERNEL);
+ if (!slot)
+ goto error;
+
+ slot->hotplug_slot = kzalloc(sizeof(*(slot->hotplug_slot)),
+ GFP_KERNEL);
+ if (!slot->hotplug_slot)
+ goto error_slot;
+ hotplug_slot = slot->hotplug_slot;
+
+ hotplug_slot->info = kzalloc(sizeof(*(hotplug_slot->info)),
+ GFP_KERNEL);
+ if (!hotplug_slot->info)
+ goto error_hpslot;
+ hotplug_slot_info = hotplug_slot->info;
+
+ slot->ctrl = ctrl;
+ slot->bus = ctrl->bus;
+ slot->device = slot_device;
+ slot->number = slot_number;
+ dbg("slot->number = %u\n", slot->number);
+
+ slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9,
+ slot_entry);
+
+ while (slot_entry && (readw(slot_entry + SMBIOS_SLOT_NUMBER) !=
+ slot->number)) {
+ slot_entry = get_SMBIOS_entry(smbios_start,
+ smbios_table, 9, slot_entry);
+ }
+
+ slot->p_sm_slot = slot_entry;
+
+ init_timer(&slot->task_event);
+ slot->task_event.expires = jiffies + 5 * HZ;
+ slot->task_event.function = cpqhp_pushbutton_thread;
+
+ /*FIXME: these capabilities aren't used but if they are
+ * they need to be correctly implemented
+ */
+ slot->capabilities |= PCISLOT_REPLACE_SUPPORTED;
+ slot->capabilities |= PCISLOT_INTERLOCK_SUPPORTED;
+
+ if (is_slot64bit(slot))
+ slot->capabilities |= PCISLOT_64_BIT_SUPPORTED;
+ if (is_slot66mhz(slot))
+ slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED;
+ if (ctrl->speed == PCI_SPEED_66MHz)
+ slot->capabilities |= PCISLOT_66_MHZ_OPERATION;
+
+ ctrl_slot =
+ slot_device - (readb(ctrl->hpc_reg + SLOT_MASK) >> 4);
+
+ /* Check presence */
+ slot->capabilities |=
+ ((((~tempdword) >> 23) |
+ ((~tempdword) >> 15)) >> ctrl_slot) & 0x02;
+ /* Check the switch state */
+ slot->capabilities |=
+ ((~tempdword & 0xFF) >> ctrl_slot) & 0x01;
+ /* Check the slot enable */
+ slot->capabilities |=
+ ((read_slot_enable(ctrl) << 2) >> ctrl_slot) & 0x04;
+
+ /* register this slot with the hotplug pci core */
+ hotplug_slot->release = &release_slot;
+ hotplug_slot->private = slot;
+ snprintf(name, SLOT_NAME_SIZE, "%u", slot->number);
+ hotplug_slot->ops = &cpqphp_hotplug_slot_ops;
+
+ hotplug_slot_info->power_status = get_slot_enabled(ctrl, slot);
+ hotplug_slot_info->attention_status =
+ cpq_get_attention_status(ctrl, slot);
+ hotplug_slot_info->latch_status =
+ cpq_get_latch_status(ctrl, slot);
+ hotplug_slot_info->adapter_status =
+ get_presence_status(ctrl, slot);
+
+ dbg("registering bus %d, dev %d, number %d, "
+ "ctrl->slot_device_offset %d, slot %d\n",
+ slot->bus, slot->device,
+ slot->number, ctrl->slot_device_offset,
+ slot_number);
+ result = pci_hp_register(hotplug_slot,
+ ctrl->pci_dev->bus,
+ slot->device,
+ name);
+ if (result) {
+ err("pci_hp_register failed with error %d\n", result);
+ goto error_info;
+ }
+
+ slot->next = ctrl->slot;
+ ctrl->slot = slot;
+
+ number_of_slots--;
+ slot_device++;
+ slot_number++;
+ }
+
+ return 0;
+error_info:
+ kfree(hotplug_slot_info);
+error_hpslot:
+ kfree(hotplug_slot);
+error_slot:
+ kfree(slot);
+error:
+ return result;
+}
+
+static int one_time_init(void)
+{
+ int loop;
+ int retval = 0;
+
+ if (initialized)
+ return 0;
+
+ power_mode = 0;
+
+ retval = init_cpqhp_routing_table();
+ if (retval)
+ goto error;
+
+ if (cpqhp_debug)
+ pci_print_IRQ_route();
+
+ dbg("Initialize + Start the notification mechanism \n");
+
+ retval = cpqhp_event_start_thread();
+ if (retval)
+ goto error;
+
+ dbg("Initialize slot lists\n");
+ for (loop = 0; loop < 256; loop++)
+ cpqhp_slot_list[loop] = NULL;
+
+ /* FIXME: We also need to hook the NMI handler eventually.
+ * this also needs to be worked with Christoph
+ * register_NMI_handler();
+ */
+ /* Map rom address */
+ cpqhp_rom_start = ioremap(ROM_PHY_ADDR, ROM_PHY_LEN);
+ if (!cpqhp_rom_start) {
+ err ("Could not ioremap memory region for ROM\n");
+ retval = -EIO;
+ goto error;
+ }
+
+ /* Now, map the int15 entry point if we are on compaq specific
+ * hardware
+ */
+ compaq_nvram_init(cpqhp_rom_start);
+
+ /* Map smbios table entry point structure */
+ smbios_table = detect_SMBIOS_pointer(cpqhp_rom_start,
+ cpqhp_rom_start + ROM_PHY_LEN);
+ if (!smbios_table) {
+ err ("Could not find the SMBIOS pointer in memory\n");
+ retval = -EIO;
+ goto error_rom_start;
+ }
+
+ smbios_start = ioremap(readl(smbios_table + ST_ADDRESS),
+ readw(smbios_table + ST_LENGTH));
+ if (!smbios_start) {
+ err ("Could not ioremap memory region taken from SMBIOS values\n");
+ retval = -EIO;
+ goto error_smbios_start;
+ }
+
+ initialized = 1;
+
+ return retval;
+
+error_smbios_start:
+ iounmap(smbios_start);
+error_rom_start:
+ iounmap(cpqhp_rom_start);
+error:
+ return retval;
+}
+
static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
u8 num_of_slots = 0;
@@ -815,7 +853,9 @@
return err;
}
- // Need to read VID early b/c it's used to differentiate CPQ and INTC discovery
+ /* Need to read VID early b/c it's used to differentiate CPQ and INTC
+ * discovery
+ */
rc = pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor_id);
if (rc || ((vendor_id != PCI_VENDOR_ID_COMPAQ) && (vendor_id != PCI_VENDOR_ID_INTEL))) {
err(msg_HPC_non_compaq_or_intel);
@@ -832,217 +872,209 @@
}
/* Check for the proper subsytem ID's
- * Intel uses a different SSID programming model than Compaq.
+ * Intel uses a different SSID programming model than Compaq.
* For Intel, each SSID bit identifies a PHP capability.
* Also Intel HPC's may have RID=0.
*/
- if ((pdev->revision > 2) || (vendor_id == PCI_VENDOR_ID_INTEL)) {
- // TODO: This code can be made to support non-Compaq or Intel subsystem IDs
- rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid);
- if (rc) {
- err("%s : pci_read_config_word failed\n", __func__);
- goto err_disable_device;
- }
- dbg("Subsystem Vendor ID: %x\n", subsystem_vid);
- if ((subsystem_vid != PCI_VENDOR_ID_COMPAQ) && (subsystem_vid != PCI_VENDOR_ID_INTEL)) {
- err(msg_HPC_non_compaq_or_intel);
- rc = -ENODEV;
- goto err_disable_device;
- }
-
- ctrl = kzalloc(sizeof(struct controller), GFP_KERNEL);
- if (!ctrl) {
- err("%s : out of memory\n", __func__);
- rc = -ENOMEM;
- goto err_disable_device;
- }
-
- rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsystem_deviceid);
- if (rc) {
- err("%s : pci_read_config_word failed\n", __func__);
- goto err_free_ctrl;
- }
-
- info("Hot Plug Subsystem Device ID: %x\n", subsystem_deviceid);
-
- /* Set Vendor ID, so it can be accessed later from other functions */
- ctrl->vendor_id = vendor_id;
-
- switch (subsystem_vid) {
- case PCI_VENDOR_ID_COMPAQ:
- if (pdev->revision >= 0x13) { /* CIOBX */
- ctrl->push_flag = 1;
- ctrl->slot_switch_type = 1;
- ctrl->push_button = 1;
- ctrl->pci_config_space = 1;
- ctrl->defeature_PHP = 1;
- ctrl->pcix_support = 1;
- ctrl->pcix_speed_capability = 1;
- pci_read_config_byte(pdev, 0x41, &bus_cap);
- if (bus_cap & 0x80) {
- dbg("bus max supports 133MHz PCI-X\n");
- ctrl->speed_capability = PCI_SPEED_133MHz_PCIX;
- break;
- }
- if (bus_cap & 0x40) {
- dbg("bus max supports 100MHz PCI-X\n");
- ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
- break;
- }
- if (bus_cap & 20) {
- dbg("bus max supports 66MHz PCI-X\n");
- ctrl->speed_capability = PCI_SPEED_66MHz_PCIX;
- break;
- }
- if (bus_cap & 10) {
- dbg("bus max supports 66MHz PCI\n");
- ctrl->speed_capability = PCI_SPEED_66MHz;
- break;
- }
-
- break;
- }
-
- switch (subsystem_deviceid) {
- case PCI_SUB_HPC_ID:
- /* Original 6500/7000 implementation */
- ctrl->slot_switch_type = 1;
- ctrl->speed_capability = PCI_SPEED_33MHz;
- ctrl->push_button = 0;
- ctrl->pci_config_space = 1;
- ctrl->defeature_PHP = 1;
- ctrl->pcix_support = 0;
- ctrl->pcix_speed_capability = 0;
- break;
- case PCI_SUB_HPC_ID2:
- /* First Pushbutton implementation */
- ctrl->push_flag = 1;
- ctrl->slot_switch_type = 1;
- ctrl->speed_capability = PCI_SPEED_33MHz;
- ctrl->push_button = 1;
- ctrl->pci_config_space = 1;
- ctrl->defeature_PHP = 1;
- ctrl->pcix_support = 0;
- ctrl->pcix_speed_capability = 0;
- break;
- case PCI_SUB_HPC_ID_INTC:
- /* Third party (6500/7000) */
- ctrl->slot_switch_type = 1;
- ctrl->speed_capability = PCI_SPEED_33MHz;
- ctrl->push_button = 0;
- ctrl->pci_config_space = 1;
- ctrl->defeature_PHP = 1;
- ctrl->pcix_support = 0;
- ctrl->pcix_speed_capability = 0;
- break;
- case PCI_SUB_HPC_ID3:
- /* First 66 Mhz implementation */
- ctrl->push_flag = 1;
- ctrl->slot_switch_type = 1;
- ctrl->speed_capability = PCI_SPEED_66MHz;
- ctrl->push_button = 1;
- ctrl->pci_config_space = 1;
- ctrl->defeature_PHP = 1;
- ctrl->pcix_support = 0;
- ctrl->pcix_speed_capability = 0;
- break;
- case PCI_SUB_HPC_ID4:
- /* First PCI-X implementation, 100MHz */
- ctrl->push_flag = 1;
- ctrl->slot_switch_type = 1;
- ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
- ctrl->push_button = 1;
- ctrl->pci_config_space = 1;
- ctrl->defeature_PHP = 1;
- ctrl->pcix_support = 1;
- ctrl->pcix_speed_capability = 0;
- break;
- default:
- err(msg_HPC_not_supported);
- rc = -ENODEV;
- goto err_free_ctrl;
- }
- break;
-
- case PCI_VENDOR_ID_INTEL:
- /* Check for speed capability (0=33, 1=66) */
- if (subsystem_deviceid & 0x0001) {
- ctrl->speed_capability = PCI_SPEED_66MHz;
- } else {
- ctrl->speed_capability = PCI_SPEED_33MHz;
- }
-
- /* Check for push button */
- if (subsystem_deviceid & 0x0002) {
- /* no push button */
- ctrl->push_button = 0;
- } else {
- /* push button supported */
- ctrl->push_button = 1;
- }
-
- /* Check for slot switch type (0=mechanical, 1=not mechanical) */
- if (subsystem_deviceid & 0x0004) {
- /* no switch */
- ctrl->slot_switch_type = 0;
- } else {
- /* switch */
- ctrl->slot_switch_type = 1;
- }
-
- /* PHP Status (0=De-feature PHP, 1=Normal operation) */
- if (subsystem_deviceid & 0x0008) {
- ctrl->defeature_PHP = 1; // PHP supported
- } else {
- ctrl->defeature_PHP = 0; // PHP not supported
- }
-
- /* Alternate Base Address Register Interface (0=not supported, 1=supported) */
- if (subsystem_deviceid & 0x0010) {
- ctrl->alternate_base_address = 1; // supported
- } else {
- ctrl->alternate_base_address = 0; // not supported
- }
-
- /* PCI Config Space Index (0=not supported, 1=supported) */
- if (subsystem_deviceid & 0x0020) {
- ctrl->pci_config_space = 1; // supported
- } else {
- ctrl->pci_config_space = 0; // not supported
- }
-
- /* PCI-X support */
- if (subsystem_deviceid & 0x0080) {
- /* PCI-X capable */
- ctrl->pcix_support = 1;
- /* Frequency of operation in PCI-X mode */
- if (subsystem_deviceid & 0x0040) {
- /* 133MHz PCI-X if bit 7 is 1 */
- ctrl->pcix_speed_capability = 1;
- } else {
- /* 100MHz PCI-X if bit 7 is 1 and bit 0 is 0, */
- /* 66MHz PCI-X if bit 7 is 1 and bit 0 is 1 */
- ctrl->pcix_speed_capability = 0;
- }
- } else {
- /* Conventional PCI */
- ctrl->pcix_support = 0;
- ctrl->pcix_speed_capability = 0;
- }
- break;
-
- default:
- err(msg_HPC_not_supported);
- rc = -ENODEV;
- goto err_free_ctrl;
- }
-
- } else {
+ if ((pdev->revision <= 2) && (vendor_id != PCI_VENDOR_ID_INTEL)) {
err(msg_HPC_not_supported);
return -ENODEV;
}
- // Tell the user that we found one.
+ /* TODO: This code can be made to support non-Compaq or Intel
+ * subsystem IDs
+ */
+ rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid);
+ if (rc) {
+ err("%s : pci_read_config_word failed\n", __func__);
+ goto err_disable_device;
+ }
+ dbg("Subsystem Vendor ID: %x\n", subsystem_vid);
+ if ((subsystem_vid != PCI_VENDOR_ID_COMPAQ) && (subsystem_vid != PCI_VENDOR_ID_INTEL)) {
+ err(msg_HPC_non_compaq_or_intel);
+ rc = -ENODEV;
+ goto err_disable_device;
+ }
+
+ ctrl = kzalloc(sizeof(struct controller), GFP_KERNEL);
+ if (!ctrl) {
+ err("%s : out of memory\n", __func__);
+ rc = -ENOMEM;
+ goto err_disable_device;
+ }
+
+ rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsystem_deviceid);
+ if (rc) {
+ err("%s : pci_read_config_word failed\n", __func__);
+ goto err_free_ctrl;
+ }
+
+ info("Hot Plug Subsystem Device ID: %x\n", subsystem_deviceid);
+
+ /* Set Vendor ID, so it can be accessed later from other
+ * functions
+ */
+ ctrl->vendor_id = vendor_id;
+
+ switch (subsystem_vid) {
+ case PCI_VENDOR_ID_COMPAQ:
+ if (pdev->revision >= 0x13) { /* CIOBX */
+ ctrl->push_flag = 1;
+ ctrl->slot_switch_type = 1;
+ ctrl->push_button = 1;
+ ctrl->pci_config_space = 1;
+ ctrl->defeature_PHP = 1;
+ ctrl->pcix_support = 1;
+ ctrl->pcix_speed_capability = 1;
+ pci_read_config_byte(pdev, 0x41, &bus_cap);
+ if (bus_cap & 0x80) {
+ dbg("bus max supports 133MHz PCI-X\n");
+ ctrl->speed_capability = PCI_SPEED_133MHz_PCIX;
+ break;
+ }
+ if (bus_cap & 0x40) {
+ dbg("bus max supports 100MHz PCI-X\n");
+ ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
+ break;
+ }
+ if (bus_cap & 20) {
+ dbg("bus max supports 66MHz PCI-X\n");
+ ctrl->speed_capability = PCI_SPEED_66MHz_PCIX;
+ break;
+ }
+ if (bus_cap & 10) {
+ dbg("bus max supports 66MHz PCI\n");
+ ctrl->speed_capability = PCI_SPEED_66MHz;
+ break;
+ }
+
+ break;
+ }
+
+ switch (subsystem_deviceid) {
+ case PCI_SUB_HPC_ID:
+ /* Original 6500/7000 implementation */
+ ctrl->slot_switch_type = 1;
+ ctrl->speed_capability = PCI_SPEED_33MHz;
+ ctrl->push_button = 0;
+ ctrl->pci_config_space = 1;
+ ctrl->defeature_PHP = 1;
+ ctrl->pcix_support = 0;
+ ctrl->pcix_speed_capability = 0;
+ break;
+ case PCI_SUB_HPC_ID2:
+ /* First Pushbutton implementation */
+ ctrl->push_flag = 1;
+ ctrl->slot_switch_type = 1;
+ ctrl->speed_capability = PCI_SPEED_33MHz;
+ ctrl->push_button = 1;
+ ctrl->pci_config_space = 1;
+ ctrl->defeature_PHP = 1;
+ ctrl->pcix_support = 0;
+ ctrl->pcix_speed_capability = 0;
+ break;
+ case PCI_SUB_HPC_ID_INTC:
+ /* Third party (6500/7000) */
+ ctrl->slot_switch_type = 1;
+ ctrl->speed_capability = PCI_SPEED_33MHz;
+ ctrl->push_button = 0;
+ ctrl->pci_config_space = 1;
+ ctrl->defeature_PHP = 1;
+ ctrl->pcix_support = 0;
+ ctrl->pcix_speed_capability = 0;
+ break;
+ case PCI_SUB_HPC_ID3:
+ /* First 66 Mhz implementation */
+ ctrl->push_flag = 1;
+ ctrl->slot_switch_type = 1;
+ ctrl->speed_capability = PCI_SPEED_66MHz;
+ ctrl->push_button = 1;
+ ctrl->pci_config_space = 1;
+ ctrl->defeature_PHP = 1;
+ ctrl->pcix_support = 0;
+ ctrl->pcix_speed_capability = 0;
+ break;
+ case PCI_SUB_HPC_ID4:
+ /* First PCI-X implementation, 100MHz */
+ ctrl->push_flag = 1;
+ ctrl->slot_switch_type = 1;
+ ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
+ ctrl->push_button = 1;
+ ctrl->pci_config_space = 1;
+ ctrl->defeature_PHP = 1;
+ ctrl->pcix_support = 1;
+ ctrl->pcix_speed_capability = 0;
+ break;
+ default:
+ err(msg_HPC_not_supported);
+ rc = -ENODEV;
+ goto err_free_ctrl;
+ }
+ break;
+
+ case PCI_VENDOR_ID_INTEL:
+ /* Check for speed capability (0=33, 1=66) */
+ if (subsystem_deviceid & 0x0001)
+ ctrl->speed_capability = PCI_SPEED_66MHz;
+ else
+ ctrl->speed_capability = PCI_SPEED_33MHz;
+
+ /* Check for push button */
+ if (subsystem_deviceid & 0x0002)
+ ctrl->push_button = 0;
+ else
+ ctrl->push_button = 1;
+
+ /* Check for slot switch type (0=mechanical, 1=not mechanical) */
+ if (subsystem_deviceid & 0x0004)
+ ctrl->slot_switch_type = 0;
+ else
+ ctrl->slot_switch_type = 1;
+
+ /* PHP Status (0=De-feature PHP, 1=Normal operation) */
+ if (subsystem_deviceid & 0x0008)
+ ctrl->defeature_PHP = 1; /* PHP supported */
+ else
+ ctrl->defeature_PHP = 0; /* PHP not supported */
+
+ /* Alternate Base Address Register Interface
+ * (0=not supported, 1=supported)
+ */
+ if (subsystem_deviceid & 0x0010)
+ ctrl->alternate_base_address = 1;
+ else
+ ctrl->alternate_base_address = 0;
+
+ /* PCI Config Space Index (0=not supported, 1=supported) */
+ if (subsystem_deviceid & 0x0020)
+ ctrl->pci_config_space = 1;
+ else
+ ctrl->pci_config_space = 0;
+
+ /* PCI-X support */
+ if (subsystem_deviceid & 0x0080) {
+ ctrl->pcix_support = 1;
+ if (subsystem_deviceid & 0x0040)
+ /* 133MHz PCI-X if bit 7 is 1 */
+ ctrl->pcix_speed_capability = 1;
+ else
+ /* 100MHz PCI-X if bit 7 is 1 and bit 0 is 0, */
+ /* 66MHz PCI-X if bit 7 is 1 and bit 0 is 1 */
+ ctrl->pcix_speed_capability = 0;
+ } else {
+ /* Conventional PCI */
+ ctrl->pcix_support = 0;
+ ctrl->pcix_speed_capability = 0;
+ }
+ break;
+
+ default:
+ err(msg_HPC_not_supported);
+ rc = -ENODEV;
+ goto err_free_ctrl;
+ }
+
+ /* Tell the user that we found one. */
info("Initializing the PCI hot plug controller residing on PCI bus %d\n",
pdev->bus->number);
@@ -1087,7 +1119,7 @@
if (rc) {
goto err_free_bus;
}
-
+
dbg("pdev = %p\n", pdev);
dbg("pci resource start %llx\n", (unsigned long long)pci_resource_start(pdev, 0));
dbg("pci resource len %llx\n", (unsigned long long)pci_resource_len(pdev, 0));
@@ -1109,7 +1141,7 @@
goto err_free_mem_region;
}
- // Check for 66Mhz operation
+ /* Check for 66Mhz operation */
ctrl->speed = get_controller_speed(ctrl);
@@ -1120,7 +1152,7 @@
*
********************************************************/
- // find the physical slot number of the first hot plug slot
+ /* find the physical slot number of the first hot plug slot */
/* Get slot won't work for devices behind bridges, but
* in this case it will always be called for the "base"
@@ -1137,7 +1169,7 @@
goto err_iounmap;
}
- // Store PCI Config Space for all devices on this bus
+ /* Store PCI Config Space for all devices on this bus */
rc = cpqhp_save_config(ctrl, ctrl->bus, readb(ctrl->hpc_reg + SLOT_MASK));
if (rc) {
err("%s: unable to save PCI configuration data, error %d\n",
@@ -1148,7 +1180,7 @@
/*
* Get IO, memory, and IRQ resources for new devices
*/
- // The next line is required for cpqhp_find_available_resources
+ /* The next line is required for cpqhp_find_available_resources */
ctrl->interrupt = pdev->irq;
if (ctrl->interrupt < 0x10) {
cpqhp_legacy_mode = 1;
@@ -1182,7 +1214,7 @@
__func__, rc);
goto err_iounmap;
}
-
+
/* Mask all general input interrupts */
writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_MASK);
@@ -1196,12 +1228,14 @@
goto err_iounmap;
}
- /* Enable Shift Out interrupt and clear it, also enable SERR on power fault */
+ /* Enable Shift Out interrupt and clear it, also enable SERR on power
+ * fault
+ */
temp_word = readw(ctrl->hpc_reg + MISC);
temp_word |= 0x4006;
writew(temp_word, ctrl->hpc_reg + MISC);
- // Changed 05/05/97 to clear all interrupts at start
+ /* Changed 05/05/97 to clear all interrupts at start */
writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_INPUT_CLEAR);
ctrl->ctrl_int_comp = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
@@ -1216,13 +1250,14 @@
cpqhp_ctrl_list = ctrl;
}
- // turn off empty slots here unless command line option "ON" set
- // Wait for exclusive access to hardware
+ /* turn off empty slots here unless command line option "ON" set
+ * Wait for exclusive access to hardware
+ */
mutex_lock(&ctrl->crit_sect);
num_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
- // find first device number for the ctrl
+ /* find first device number for the ctrl */
device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
while (num_of_slots) {
@@ -1234,23 +1269,21 @@
hp_slot = func->device - ctrl->slot_device_offset;
dbg("hp_slot: %d\n", hp_slot);
- // We have to save the presence info for these slots
+ /* We have to save the presence info for these slots */
temp_word = ctrl->ctrl_int_comp >> 16;
func->presence_save = (temp_word >> hp_slot) & 0x01;
func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
- if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) {
+ if (ctrl->ctrl_int_comp & (0x1L << hp_slot))
func->switch_save = 0;
- } else {
+ else
func->switch_save = 0x10;
- }
- if (!power_mode) {
+ if (!power_mode)
if (!func->is_a_board) {
green_LED_off(ctrl, hp_slot);
slot_disable(ctrl, hp_slot);
}
- }
device++;
num_of_slots--;
@@ -1258,7 +1291,7 @@
if (!power_mode) {
set_SOGO(ctrl);
- // Wait for SOBS to be unset
+ /* Wait for SOBS to be unset */
wait_for_ctrl_irq(ctrl);
}
@@ -1269,7 +1302,7 @@
goto err_free_irq;
}
- // Done with exclusive hardware access
+ /* Done with exclusive hardware access */
mutex_unlock(&ctrl->crit_sect);
cpqhp_create_debugfs_files(ctrl);
@@ -1291,77 +1324,6 @@
return rc;
}
-
-static int one_time_init(void)
-{
- int loop;
- int retval = 0;
-
- if (initialized)
- return 0;
-
- power_mode = 0;
-
- retval = pci_print_IRQ_route();
- if (retval)
- goto error;
-
- dbg("Initialize + Start the notification mechanism \n");
-
- retval = cpqhp_event_start_thread();
- if (retval)
- goto error;
-
- dbg("Initialize slot lists\n");
- for (loop = 0; loop < 256; loop++) {
- cpqhp_slot_list[loop] = NULL;
- }
-
- // FIXME: We also need to hook the NMI handler eventually.
- // this also needs to be worked with Christoph
- // register_NMI_handler();
-
- // Map rom address
- cpqhp_rom_start = ioremap(ROM_PHY_ADDR, ROM_PHY_LEN);
- if (!cpqhp_rom_start) {
- err ("Could not ioremap memory region for ROM\n");
- retval = -EIO;
- goto error;
- }
-
- /* Now, map the int15 entry point if we are on compaq specific hardware */
- compaq_nvram_init(cpqhp_rom_start);
-
- /* Map smbios table entry point structure */
- smbios_table = detect_SMBIOS_pointer(cpqhp_rom_start,
- cpqhp_rom_start + ROM_PHY_LEN);
- if (!smbios_table) {
- err ("Could not find the SMBIOS pointer in memory\n");
- retval = -EIO;
- goto error_rom_start;
- }
-
- smbios_start = ioremap(readl(smbios_table + ST_ADDRESS),
- readw(smbios_table + ST_LENGTH));
- if (!smbios_start) {
- err ("Could not ioremap memory region taken from SMBIOS values\n");
- retval = -EIO;
- goto error_smbios_start;
- }
-
- initialized = 1;
-
- return retval;
-
-error_smbios_start:
- iounmap(smbios_start);
-error_rom_start:
- iounmap(cpqhp_rom_start);
-error:
- return retval;
-}
-
-
static void __exit unload_cpqphpd(void)
{
struct pci_func *next;
@@ -1381,10 +1343,10 @@
if (ctrl->hpc_reg) {
u16 misc;
rc = read_slot_enable (ctrl);
-
+
writeb(0, ctrl->hpc_reg + SLOT_SERR);
writel(0xFFFFFFC0L | ~rc, ctrl->hpc_reg + INT_MASK);
-
+
misc = readw(ctrl->hpc_reg + MISC);
misc &= 0xFFFD;
writew(misc, ctrl->hpc_reg + MISC);
@@ -1464,38 +1426,34 @@
}
}
- // Stop the notification mechanism
+ /* Stop the notification mechanism */
if (initialized)
cpqhp_event_stop_thread();
- //unmap the rom address
+ /* unmap the rom address */
if (cpqhp_rom_start)
iounmap(cpqhp_rom_start);
if (smbios_start)
iounmap(smbios_start);
}
-
-
static struct pci_device_id hpcd_pci_tbl[] = {
{
/* handle any PCI Hotplug controller */
.class = ((PCI_CLASS_SYSTEM_PCI_HOTPLUG << 8) | 0x00),
.class_mask = ~0,
-
+
/* no matter who makes it */
.vendor = PCI_ANY_ID,
.device = PCI_ANY_ID,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
-
+
}, { /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE(pci, hpcd_pci_tbl);
-
-
static struct pci_driver cpqhpc_driver = {
.name = "compaq_pci_hotplug",
.id_table = hpcd_pci_tbl,
@@ -1503,8 +1461,6 @@
/* remove: cpqhpc_remove_one, */
};
-
-
static int __init cpqhpc_init(void)
{
int result;
@@ -1518,7 +1474,6 @@
return result;
}
-
static void __exit cpqhpc_cleanup(void)
{
dbg("unload_cpqphpd()\n");
@@ -1529,8 +1484,5 @@
cpqhp_shutdown_debugfs();
}
-
module_init(cpqhpc_init);
module_exit(cpqhpc_cleanup);
-
-
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index cc227a8..2fa47af 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -81,14 +81,15 @@
for (hp_slot = 0; hp_slot < 6; hp_slot++) {
if (change & (0x1L << hp_slot)) {
- /**********************************
+ /*
* this one changed.
- **********************************/
+ */
func = cpqhp_slot_find(ctrl->bus,
(hp_slot + ctrl->slot_device_offset), 0);
/* this is the structure that tells the worker thread
- *what to do */
+ * what to do
+ */
taskInfo = &(ctrl->event_queue[ctrl->next_event]);
ctrl->next_event = (ctrl->next_event + 1) % 10;
taskInfo->hp_slot = hp_slot;
@@ -100,17 +101,17 @@
func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) {
- /**********************************
+ /*
* Switch opened
- **********************************/
+ */
func->switch_save = 0;
taskInfo->event_type = INT_SWITCH_OPEN;
} else {
- /**********************************
+ /*
* Switch closed
- **********************************/
+ */
func->switch_save = 0x10;
@@ -131,9 +132,8 @@
{
struct slot *slot = ctrl->slot;
- while (slot && (slot->device != device)) {
+ while (slot && (slot->device != device))
slot = slot->next;
- }
return slot;
}
@@ -152,17 +152,17 @@
if (!change)
return 0;
- /**********************************
+ /*
* Presence Change
- **********************************/
+ */
dbg("cpqsbd: Presence/Notify input change.\n");
dbg(" Changed bits are 0x%4.4x\n", change );
for (hp_slot = 0; hp_slot < 6; hp_slot++) {
if (change & (0x0101 << hp_slot)) {
- /**********************************
+ /*
* this one changed.
- **********************************/
+ */
func = cpqhp_slot_find(ctrl->bus,
(hp_slot + ctrl->slot_device_offset), 0);
@@ -177,22 +177,23 @@
return 0;
/* If the switch closed, must be a button
- * If not in button mode, nevermind */
+ * If not in button mode, nevermind
+ */
if (func->switch_save && (ctrl->push_button == 1)) {
temp_word = ctrl->ctrl_int_comp >> 16;
temp_byte = (temp_word >> hp_slot) & 0x01;
temp_byte |= (temp_word >> (hp_slot + 7)) & 0x02;
if (temp_byte != func->presence_save) {
- /**************************************
+ /*
* button Pressed (doesn't do anything)
- **************************************/
+ */
dbg("hp_slot %d button pressed\n", hp_slot);
taskInfo->event_type = INT_BUTTON_PRESS;
} else {
- /**********************************
+ /*
* button Released - TAKE ACTION!!!!
- **********************************/
+ */
dbg("hp_slot %d button released\n", hp_slot);
taskInfo->event_type = INT_BUTTON_RELEASE;
@@ -210,7 +211,8 @@
}
} else {
/* Switch is open, assume a presence change
- * Save the presence state */
+ * Save the presence state
+ */
temp_word = ctrl->ctrl_int_comp >> 16;
func->presence_save = (temp_word >> hp_slot) & 0x01;
func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
@@ -241,17 +243,17 @@
if (!change)
return 0;
- /**********************************
+ /*
* power fault
- **********************************/
+ */
info("power fault interrupt\n");
for (hp_slot = 0; hp_slot < 6; hp_slot++) {
if (change & (0x01 << hp_slot)) {
- /**********************************
+ /*
* this one changed.
- **********************************/
+ */
func = cpqhp_slot_find(ctrl->bus,
(hp_slot + ctrl->slot_device_offset), 0);
@@ -262,16 +264,16 @@
rc++;
if (ctrl->ctrl_int_comp & (0x00000100 << hp_slot)) {
- /**********************************
+ /*
* power fault Cleared
- **********************************/
+ */
func->status = 0x00;
taskInfo->event_type = INT_POWER_FAULT_CLEAR;
} else {
- /**********************************
+ /*
* power fault
- **********************************/
+ */
taskInfo->event_type = INT_POWER_FAULT;
if (ctrl->rev < 4) {
@@ -432,13 +434,15 @@
/* If we got here, there the bridge requires some of the resource, but
- * we may be able to split some off of the front */
+ * we may be able to split some off of the front
+ */
node = *head;
if (node->length & (alignment -1)) {
/* this one isn't an aligned length, so we'll make a new entry
- * and split it up. */
+ * and split it up.
+ */
split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
if (!split_node)
@@ -544,10 +548,10 @@
if (!(*head))
return NULL;
- if ( cpqhp_resource_sort_and_combine(head) )
+ if (cpqhp_resource_sort_and_combine(head))
return NULL;
- if ( sort_by_size(head) )
+ if (sort_by_size(head))
return NULL;
for (node = *head; node; node = node->next) {
@@ -556,7 +560,8 @@
if (node->base & (size - 1)) {
/* this one isn't base aligned properly
- * so we'll make a new entry and split it up */
+ * so we'll make a new entry and split it up
+ */
temp_dword = (node->base | (size-1)) + 1;
/* Short circuit if adjusted size is too small */
@@ -581,7 +586,8 @@
/* Don't need to check if too small since we already did */
if (node->length > size) {
/* this one is longer than we need
- * so we'll make a new entry and split it up */
+ * so we'll make a new entry and split it up
+ */
split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
if (!split_node)
@@ -601,7 +607,8 @@
continue;
/* If we got here, then it is the right size
- * Now take it out of the list and break */
+ * Now take it out of the list and break
+ */
if (*head == node) {
*head = node->next;
} else {
@@ -642,14 +649,16 @@
return NULL;
for (max = *head; max; max = max->next) {
- /* If not big enough we could probably just bail,
- * instead we'll continue to the next. */
+ /* If not big enough we could probably just bail,
+ * instead we'll continue to the next.
+ */
if (max->length < size)
continue;
if (max->base & (size - 1)) {
/* this one isn't base aligned properly
- * so we'll make a new entry and split it up */
+ * so we'll make a new entry and split it up
+ */
temp_dword = (max->base | (size-1)) + 1;
/* Short circuit if adjusted size is too small */
@@ -672,7 +681,8 @@
if ((max->base + max->length) & (size - 1)) {
/* this one isn't end aligned properly at the top
- * so we'll make a new entry and split it up */
+ * so we'll make a new entry and split it up
+ */
split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
if (!split_node)
@@ -744,7 +754,8 @@
if (node->base & (size - 1)) {
dbg("%s: not aligned\n", __func__);
/* this one isn't base aligned properly
- * so we'll make a new entry and split it up */
+ * so we'll make a new entry and split it up
+ */
temp_dword = (node->base | (size-1)) + 1;
/* Short circuit if adjusted size is too small */
@@ -769,7 +780,8 @@
if (node->length > size) {
dbg("%s: too big\n", __func__);
/* this one is longer than we need
- * so we'll make a new entry and split it up */
+ * so we'll make a new entry and split it up
+ */
split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
if (!split_node)
@@ -886,19 +898,19 @@
u32 Diff;
u32 temp_dword;
-
+
misc = readw(ctrl->hpc_reg + MISC);
- /***************************************
+ /*
* Check to see if it was our interrupt
- ***************************************/
+ */
if (!(misc & 0x000C)) {
return IRQ_NONE;
}
if (misc & 0x0004) {
- /**********************************
+ /*
* Serial Output interrupt Pending
- **********************************/
+ */
/* Clear the interrupt */
misc |= 0x0004;
@@ -961,11 +973,8 @@
struct pci_func *next;
new_slot = kzalloc(sizeof(*new_slot), GFP_KERNEL);
- if (new_slot == NULL) {
- /* I'm not dead yet!
- * You will be. */
+ if (new_slot == NULL)
return new_slot;
- }
new_slot->next = NULL;
new_slot->configured = 1;
@@ -996,10 +1005,8 @@
return 1;
next = cpqhp_slot_list[old_slot->bus];
-
- if (next == NULL) {
+ if (next == NULL)
return 1;
- }
if (next == old_slot) {
cpqhp_slot_list[old_slot->bus] = old_slot->next;
@@ -1008,9 +1015,8 @@
return 0;
}
- while ((next->next != old_slot) && (next->next != NULL)) {
+ while ((next->next != old_slot) && (next->next != NULL))
next = next->next;
- }
if (next->next == old_slot) {
next->next = old_slot->next;
@@ -1040,9 +1046,8 @@
for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) {
next = cpqhp_slot_list[tempBus];
- while (!slot_remove(next)) {
+ while (!slot_remove(next))
next = cpqhp_slot_list[tempBus];
- }
}
next = cpqhp_slot_list[bridge->bus];
@@ -1130,39 +1135,43 @@
u8 slot_power = readb(ctrl->hpc_reg + SLOT_POWER);
u16 reg16;
u32 leds = readl(ctrl->hpc_reg + LED_CONTROL);
-
+
if (ctrl->speed == adapter_speed)
return 0;
-
+
/* We don't allow freq/mode changes if we find another adapter running
- * in another slot on this controller */
+ * in another slot on this controller
+ */
for(slot = ctrl->slot; slot; slot = slot->next) {
- if (slot->device == (hp_slot + ctrl->slot_device_offset))
+ if (slot->device == (hp_slot + ctrl->slot_device_offset))
continue;
if (!slot->hotplug_slot || !slot->hotplug_slot->info)
continue;
- if (slot->hotplug_slot->info->adapter_status == 0)
+ if (slot->hotplug_slot->info->adapter_status == 0)
continue;
/* If another adapter is running on the same segment but at a
* lower speed/mode, we allow the new adapter to function at
- * this rate if supported */
- if (ctrl->speed < adapter_speed)
+ * this rate if supported
+ */
+ if (ctrl->speed < adapter_speed)
return 0;
return 1;
}
-
+
/* If the controller doesn't support freq/mode changes and the
- * controller is running at a higher mode, we bail */
+ * controller is running at a higher mode, we bail
+ */
if ((ctrl->speed > adapter_speed) && (!ctrl->pcix_speed_capability))
return 1;
-
+
/* But we allow the adapter to run at a lower rate if possible */
if ((ctrl->speed < adapter_speed) && (!ctrl->pcix_speed_capability))
return 0;
/* We try to set the max speed supported by both the adapter and
- * controller */
+ * controller
+ */
if (ctrl->speed_capability < adapter_speed) {
if (ctrl->speed == ctrl->speed_capability)
return 0;
@@ -1171,22 +1180,22 @@
writel(0x0L, ctrl->hpc_reg + LED_CONTROL);
writeb(0x00, ctrl->hpc_reg + SLOT_ENABLE);
-
- set_SOGO(ctrl);
+
+ set_SOGO(ctrl);
wait_for_ctrl_irq(ctrl);
-
+
if (adapter_speed != PCI_SPEED_133MHz_PCIX)
reg = 0xF5;
else
- reg = 0xF4;
+ reg = 0xF4;
pci_write_config_byte(ctrl->pci_dev, 0x41, reg);
-
+
reg16 = readw(ctrl->hpc_reg + NEXT_CURR_FREQ);
reg16 &= ~0x000F;
switch(adapter_speed) {
- case(PCI_SPEED_133MHz_PCIX):
+ case(PCI_SPEED_133MHz_PCIX):
reg = 0x75;
- reg16 |= 0xB;
+ reg16 |= 0xB;
break;
case(PCI_SPEED_100MHz_PCIX):
reg = 0x74;
@@ -1203,48 +1212,48 @@
default: /* 33MHz PCI 2.2 */
reg = 0x71;
break;
-
+
}
reg16 |= 0xB << 12;
writew(reg16, ctrl->hpc_reg + NEXT_CURR_FREQ);
-
- mdelay(5);
-
+
+ mdelay(5);
+
/* Reenable interrupts */
writel(0, ctrl->hpc_reg + INT_MASK);
- pci_write_config_byte(ctrl->pci_dev, 0x41, reg);
-
+ pci_write_config_byte(ctrl->pci_dev, 0x41, reg);
+
/* Restart state machine */
reg = ~0xF;
pci_read_config_byte(ctrl->pci_dev, 0x43, ®);
pci_write_config_byte(ctrl->pci_dev, 0x43, reg);
-
+
/* Only if mode change...*/
if (((ctrl->speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
((ctrl->speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz)))
set_SOGO(ctrl);
-
+
wait_for_ctrl_irq(ctrl);
mdelay(1100);
-
+
/* Restore LED/Slot state */
writel(leds, ctrl->hpc_reg + LED_CONTROL);
writeb(slot_power, ctrl->hpc_reg + SLOT_ENABLE);
-
+
set_SOGO(ctrl);
wait_for_ctrl_irq(ctrl);
ctrl->speed = adapter_speed;
slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
- info("Successfully changed frequency/mode for adapter in slot %d\n",
+ info("Successfully changed frequency/mode for adapter in slot %d\n",
slot->number);
return 0;
}
-/* the following routines constitute the bulk of the
- hotplug controller logic
+/* the following routines constitute the bulk of the
+ * hotplug controller logic
*/
@@ -1268,17 +1277,17 @@
hp_slot = func->device - ctrl->slot_device_offset;
- if (readl(ctrl->hpc_reg + INT_INPUT_CLEAR) & (0x01L << hp_slot)) {
- /**********************************
- * The switch is open.
- **********************************/
+ /*
+ * The switch is open.
+ */
+ if (readl(ctrl->hpc_reg + INT_INPUT_CLEAR) & (0x01L << hp_slot))
rc = INTERLOCK_OPEN;
- } else if (is_slot_enabled (ctrl, hp_slot)) {
- /**********************************
- * The board is already on
- **********************************/
+ /*
+ * The board is already on
+ */
+ else if (is_slot_enabled (ctrl, hp_slot))
rc = CARD_FUNCTIONING;
- } else {
+ else {
mutex_lock(&ctrl->crit_sect);
/* turn on board without attaching to the bus */
@@ -1299,7 +1308,7 @@
/* Wait for SOBS to be unset */
wait_for_ctrl_irq (ctrl);
-
+
adapter_speed = get_adapter_speed(ctrl, hp_slot);
if (ctrl->speed != adapter_speed)
if (set_controller_speed(ctrl, adapter_speed, hp_slot))
@@ -1352,7 +1361,8 @@
* Get slot won't work for devices behind
* bridges, but in this case it will always be
* called for the "base" bus/dev/func of an
- * adapter. */
+ * adapter.
+ */
mutex_lock(&ctrl->crit_sect);
@@ -1377,7 +1387,8 @@
* Get slot won't work for devices behind bridges, but
* in this case it will always be called for the "base"
- * bus/dev/func of an adapter. */
+ * bus/dev/func of an adapter.
+ */
mutex_lock(&ctrl->crit_sect);
@@ -1434,7 +1445,8 @@
wait_for_ctrl_irq (ctrl);
/* Change bits in slot power register to force another shift out
- * NOTE: this is to work around the timer bug */
+ * NOTE: this is to work around the timer bug
+ */
temp_byte = readb(ctrl->hpc_reg + SLOT_POWER);
writeb(0x00, ctrl->hpc_reg + SLOT_POWER);
writeb(temp_byte, ctrl->hpc_reg + SLOT_POWER);
@@ -1443,12 +1455,12 @@
/* Wait for SOBS to be unset */
wait_for_ctrl_irq (ctrl);
-
+
adapter_speed = get_adapter_speed(ctrl, hp_slot);
if (ctrl->speed != adapter_speed)
if (set_controller_speed(ctrl, adapter_speed, hp_slot))
rc = WRONG_BUS_FREQUENCY;
-
+
/* turn off board without attaching to the bus */
disable_slot_power (ctrl, hp_slot);
@@ -1461,7 +1473,7 @@
if (rc)
return rc;
-
+
p_slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
/* turn on board and blink green LED */
@@ -1521,7 +1533,7 @@
}
/* All F's is an empty slot or an invalid board */
- if (temp_register != 0xFFFFFFFF) { /* Check for a board in the slot */
+ if (temp_register != 0xFFFFFFFF) {
res_lists.io_head = ctrl->io_head;
res_lists.mem_head = ctrl->mem_head;
res_lists.p_mem_head = ctrl->p_mem_head;
@@ -1570,9 +1582,8 @@
index = 0;
do {
new_slot = cpqhp_slot_find(ctrl->bus, func->device, index++);
- if (new_slot && !new_slot->pci_dev) {
+ if (new_slot && !new_slot->pci_dev)
cpqhp_configure_device(ctrl, new_slot);
- }
} while (new_slot);
mutex_lock(&ctrl->crit_sect);
@@ -1859,12 +1870,12 @@
info(msg_button_on, p_slot->number);
}
mutex_lock(&ctrl->crit_sect);
-
+
dbg("blink green LED and turn off amber\n");
-
+
amber_LED_off (ctrl, hp_slot);
green_LED_blink (ctrl, hp_slot);
-
+
set_SOGO(ctrl);
/* Wait for SOBS to be unset */
@@ -1958,7 +1969,7 @@
if (cpqhp_process_SI(ctrl, func) != 0) {
amber_LED_on(ctrl, hp_slot);
green_LED_off(ctrl, hp_slot);
-
+
set_SOGO(ctrl);
/* Wait for SOBS to be unset */
@@ -2079,7 +2090,7 @@
struct pci_bus *pci_bus = ctrl->pci_bus;
int physical_slot=0;
- device = func->device;
+ device = func->device;
func = cpqhp_slot_find(ctrl->bus, device, index++);
p_slot = cpqhp_find_slot(ctrl, device);
if (p_slot) {
@@ -2113,9 +2124,8 @@
/* If the VGA Enable bit is set, remove isn't
* supported */
- if (BCR & PCI_BRIDGE_CTL_VGA) {
+ if (BCR & PCI_BRIDGE_CTL_VGA)
rc = REMOVE_NOT_SUPPORTED;
- }
}
}
@@ -2183,67 +2193,67 @@
num_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0f;
switch (test_num) {
- case 1:
- /* Do stuff here! */
+ case 1:
+ /* Do stuff here! */
- /* Do that funky LED thing */
- /* so we can restore them later */
- save_LED = readl(ctrl->hpc_reg + LED_CONTROL);
- work_LED = 0x01010101;
- switch_leds(ctrl, num_of_slots, &work_LED, 0);
- switch_leds(ctrl, num_of_slots, &work_LED, 1);
- switch_leds(ctrl, num_of_slots, &work_LED, 0);
- switch_leds(ctrl, num_of_slots, &work_LED, 1);
+ /* Do that funky LED thing */
+ /* so we can restore them later */
+ save_LED = readl(ctrl->hpc_reg + LED_CONTROL);
+ work_LED = 0x01010101;
+ switch_leds(ctrl, num_of_slots, &work_LED, 0);
+ switch_leds(ctrl, num_of_slots, &work_LED, 1);
+ switch_leds(ctrl, num_of_slots, &work_LED, 0);
+ switch_leds(ctrl, num_of_slots, &work_LED, 1);
- work_LED = 0x01010000;
+ work_LED = 0x01010000;
+ writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+ switch_leds(ctrl, num_of_slots, &work_LED, 0);
+ switch_leds(ctrl, num_of_slots, &work_LED, 1);
+ work_LED = 0x00000101;
+ writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+ switch_leds(ctrl, num_of_slots, &work_LED, 0);
+ switch_leds(ctrl, num_of_slots, &work_LED, 1);
+
+ work_LED = 0x01010000;
+ writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+ for (loop = 0; loop < num_of_slots; loop++) {
+ set_SOGO(ctrl);
+
+ /* Wait for SOGO interrupt */
+ wait_for_ctrl_irq (ctrl);
+
+ /* Get ready for next iteration */
+ long_delay((3*HZ)/10);
+ work_LED = work_LED >> 16;
writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
- switch_leds(ctrl, num_of_slots, &work_LED, 0);
- switch_leds(ctrl, num_of_slots, &work_LED, 1);
- work_LED = 0x00000101;
- writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
- switch_leds(ctrl, num_of_slots, &work_LED, 0);
- switch_leds(ctrl, num_of_slots, &work_LED, 1);
-
- work_LED = 0x01010000;
- writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
- for (loop = 0; loop < num_of_slots; loop++) {
- set_SOGO(ctrl);
-
- /* Wait for SOGO interrupt */
- wait_for_ctrl_irq (ctrl);
-
- /* Get ready for next iteration */
- long_delay((3*HZ)/10);
- work_LED = work_LED >> 16;
- writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
-
- set_SOGO(ctrl);
-
- /* Wait for SOGO interrupt */
- wait_for_ctrl_irq (ctrl);
-
- /* Get ready for next iteration */
- long_delay((3*HZ)/10);
- work_LED = work_LED << 16;
- writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
- work_LED = work_LED << 1;
- writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
- }
-
- /* put it back the way it was */
- writel(save_LED, ctrl->hpc_reg + LED_CONTROL);
set_SOGO(ctrl);
- /* Wait for SOBS to be unset */
+ /* Wait for SOGO interrupt */
wait_for_ctrl_irq (ctrl);
- break;
- case 2:
- /* Do other stuff here! */
- break;
- case 3:
- /* and more... */
- break;
+
+ /* Get ready for next iteration */
+ long_delay((3*HZ)/10);
+ work_LED = work_LED << 16;
+ writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+ work_LED = work_LED << 1;
+ writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+ }
+
+ /* put it back the way it was */
+ writel(save_LED, ctrl->hpc_reg + LED_CONTROL);
+
+ set_SOGO(ctrl);
+
+ /* Wait for SOBS to be unset */
+ wait_for_ctrl_irq (ctrl);
+ break;
+ case 2:
+ /* Do other stuff here! */
+ break;
+ case 3:
+ /* and more... */
+ break;
}
return 0;
}
@@ -2312,9 +2322,9 @@
while ((function < max_functions) && (!stop_it)) {
pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(func->device, function), 0x00, &ID);
- if (ID == 0xFFFFFFFF) { /* There's nothing there. */
+ if (ID == 0xFFFFFFFF) {
function++;
- } else { /* There's something there */
+ } else {
/* Setup slot structure. */
new_slot = cpqhp_slot_create(func->bus);
@@ -2339,8 +2349,8 @@
/*
- Configuration logic that involves the hotplug data structures and
- their bookkeeping
+ * Configuration logic that involves the hotplug data structures and
+ * their bookkeeping
*/
@@ -2393,7 +2403,7 @@
if (rc)
return rc;
- if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */
+ if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
/* set Primary bus */
dbg("set Primary bus = %d\n", func->bus);
rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_PRIMARY_BUS, func->bus);
@@ -2484,7 +2494,8 @@
temp_resources.irqs = &irqs;
/* Make copies of the nodes we are going to pass down so that
- * if there is a problem,we can just use these to free resources */
+ * if there is a problem,we can just use these to free resources
+ */
hold_bus_node = kmalloc(sizeof(*hold_bus_node), GFP_KERNEL);
hold_IO_node = kmalloc(sizeof(*hold_IO_node), GFP_KERNEL);
hold_mem_node = kmalloc(sizeof(*hold_mem_node), GFP_KERNEL);
@@ -2556,7 +2567,8 @@
temp_word = (p_mem_node->base + p_mem_node->length - 1) >> 16;
rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
- /* Adjust this to compensate for extra adjustment in first loop */
+ /* Adjust this to compensate for extra adjustment in first loop
+ */
irqs.barber_pole--;
rc = 0;
@@ -2917,27 +2929,26 @@
} /* End of base register loop */
if (cpqhp_legacy_mode) {
/* Figure out which interrupt pin this function uses */
- rc = pci_bus_read_config_byte (pci_bus, devfn,
+ rc = pci_bus_read_config_byte (pci_bus, devfn,
PCI_INTERRUPT_PIN, &temp_byte);
/* If this function needs an interrupt and we are behind
* a bridge and the pin is tied to something that's
* alread mapped, set this one the same */
- if (temp_byte && resources->irqs &&
- (resources->irqs->valid_INT &
+ if (temp_byte && resources->irqs &&
+ (resources->irqs->valid_INT &
(0x01 << ((temp_byte + resources->irqs->barber_pole - 1) & 0x03)))) {
/* We have to share with something already set up */
- IRQ = resources->irqs->interrupt[(temp_byte +
+ IRQ = resources->irqs->interrupt[(temp_byte +
resources->irqs->barber_pole - 1) & 0x03];
} else {
/* Program IRQ based on card type */
rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
- if (class_code == PCI_BASE_CLASS_STORAGE) {
+ if (class_code == PCI_BASE_CLASS_STORAGE)
IRQ = cpqhp_disk_irq;
- } else {
+ else
IRQ = cpqhp_nic_irq;
- }
}
/* IRQ Line */
diff --git a/drivers/pci/hotplug/cpqphp_nvram.c b/drivers/pci/hotplug/cpqphp_nvram.c
index cb17488..76ba8a1 100644
--- a/drivers/pci/hotplug/cpqphp_nvram.c
+++ b/drivers/pci/hotplug/cpqphp_nvram.c
@@ -94,12 +94,13 @@
static void __iomem *compaq_int15_entry_point;
-static spinlock_t int15_lock; /* lock for ordering int15_bios_call() */
+/* lock for ordering int15_bios_call() */
+static spinlock_t int15_lock;
/* This is a series of function that deals with
- setting & getting the hotplug resource table in some environment variable.
-*/
+ * setting & getting the hotplug resource table in some environment variable.
+ */
/*
* We really shouldn't be doing this unless there is a _very_ good reason to!!!
@@ -113,7 +114,7 @@
if ((*used + 1) > *avail)
return(1);
-
+
*((u8*)*p_buffer) = value;
tByte = (u8**)p_buffer;
(*tByte)++;
@@ -170,10 +171,10 @@
unsigned long flags;
int op = operation;
int ret_val;
-
+
if (!compaq_int15_entry_point)
return -ENODEV;
-
+
spin_lock_irqsave(&int15_lock, flags);
__asm__ (
"xorl %%ebx,%%ebx\n" \
@@ -187,7 +188,7 @@
"D" (buffer), "m" (compaq_int15_entry_point)
: "%ebx", "%edx");
spin_unlock_irqrestore(&int15_lock, flags);
-
+
return((ret_val & 0xFF00) >> 8);
}
@@ -210,14 +211,16 @@
available = 1024;
- // Now load the EV
+ /* Now load the EV */
temp_dword = available;
rc = access_EV(READ_EV, "CQTHPS", evbuffer, &temp_dword);
evbuffer_length = temp_dword;
- // We're maintaining the resource lists so write FF to invalidate old info
+ /* We're maintaining the resource lists so write FF to invalidate old
+ * info
+ */
temp_dword = 1;
rc = access_EV(WRITE_EV, "CQTHPS", &temp_byte, &temp_dword);
@@ -263,13 +266,13 @@
p_EV_header = (struct ev_hrt_header *) pFill;
ctrl = cpqhp_ctrl_list;
-
- // The revision of this structure
+
+ /* The revision of this structure */
rc = add_byte( &pFill, 1 + ctrl->push_flag, &usedbytes, &available);
if (rc)
return(rc);
- // The number of controllers
+ /* The number of controllers */
rc = add_byte( &pFill, 1, &usedbytes, &available);
if (rc)
return(rc);
@@ -279,27 +282,27 @@
numCtrl++;
- // The bus number
+ /* The bus number */
rc = add_byte( &pFill, ctrl->bus, &usedbytes, &available);
if (rc)
return(rc);
- // The device Number
+ /* The device Number */
rc = add_byte( &pFill, PCI_SLOT(ctrl->pci_dev->devfn), &usedbytes, &available);
if (rc)
return(rc);
- // The function Number
+ /* The function Number */
rc = add_byte( &pFill, PCI_FUNC(ctrl->pci_dev->devfn), &usedbytes, &available);
if (rc)
return(rc);
- // Skip the number of available entries
+ /* Skip the number of available entries */
rc = add_dword( &pFill, 0, &usedbytes, &available);
if (rc)
return(rc);
- // Figure out memory Available
+ /* Figure out memory Available */
resNode = ctrl->mem_head;
@@ -308,12 +311,12 @@
while (resNode) {
loop ++;
- // base
+ /* base */
rc = add_dword( &pFill, resNode->base, &usedbytes, &available);
if (rc)
return(rc);
- // length
+ /* length */
rc = add_dword( &pFill, resNode->length, &usedbytes, &available);
if (rc)
return(rc);
@@ -321,10 +324,10 @@
resNode = resNode->next;
}
- // Fill in the number of entries
+ /* Fill in the number of entries */
p_ev_ctrl->mem_avail = loop;
- // Figure out prefetchable memory Available
+ /* Figure out prefetchable memory Available */
resNode = ctrl->p_mem_head;
@@ -333,12 +336,12 @@
while (resNode) {
loop ++;
- // base
+ /* base */
rc = add_dword( &pFill, resNode->base, &usedbytes, &available);
if (rc)
return(rc);
- // length
+ /* length */
rc = add_dword( &pFill, resNode->length, &usedbytes, &available);
if (rc)
return(rc);
@@ -346,10 +349,10 @@
resNode = resNode->next;
}
- // Fill in the number of entries
+ /* Fill in the number of entries */
p_ev_ctrl->p_mem_avail = loop;
- // Figure out IO Available
+ /* Figure out IO Available */
resNode = ctrl->io_head;
@@ -358,12 +361,12 @@
while (resNode) {
loop ++;
- // base
+ /* base */
rc = add_dword( &pFill, resNode->base, &usedbytes, &available);
if (rc)
return(rc);
- // length
+ /* length */
rc = add_dword( &pFill, resNode->length, &usedbytes, &available);
if (rc)
return(rc);
@@ -371,10 +374,10 @@
resNode = resNode->next;
}
- // Fill in the number of entries
+ /* Fill in the number of entries */
p_ev_ctrl->io_avail = loop;
- // Figure out bus Available
+ /* Figure out bus Available */
resNode = ctrl->bus_head;
@@ -383,12 +386,12 @@
while (resNode) {
loop ++;
- // base
+ /* base */
rc = add_dword( &pFill, resNode->base, &usedbytes, &available);
if (rc)
return(rc);
- // length
+ /* length */
rc = add_dword( &pFill, resNode->length, &usedbytes, &available);
if (rc)
return(rc);
@@ -396,15 +399,15 @@
resNode = resNode->next;
}
- // Fill in the number of entries
+ /* Fill in the number of entries */
p_ev_ctrl->bus_avail = loop;
ctrl = ctrl->next;
}
-
+
p_EV_header->num_of_ctrl = numCtrl;
- // Now store the EV
+ /* Now store the EV */
temp_dword = usedbytes;
@@ -449,20 +452,21 @@
struct ev_hrt_header *p_EV_header;
if (!evbuffer_init) {
- // Read the resource list information in from NVRAM
+ /* Read the resource list information in from NVRAM */
if (load_HRT(rom_start))
memset (evbuffer, 0, 1024);
evbuffer_init = 1;
}
- // If we saved information in NVRAM, use it now
+ /* If we saved information in NVRAM, use it now */
p_EV_header = (struct ev_hrt_header *) evbuffer;
- // The following code is for systems where version 1.0 of this
- // driver has been loaded, but doesn't support the hardware.
- // In that case, the driver would incorrectly store something
- // in NVRAM.
+ /* The following code is for systems where version 1.0 of this
+ * driver has been loaded, but doesn't support the hardware.
+ * In that case, the driver would incorrectly store something
+ * in NVRAM.
+ */
if ((p_EV_header->Version == 2) ||
((p_EV_header->Version == 1) && !ctrl->push_flag)) {
p_byte = &(p_EV_header->next);
@@ -479,7 +483,7 @@
function = p_ev_ctrl->function;
while ((bus != ctrl->bus) ||
- (device != PCI_SLOT(ctrl->pci_dev->devfn)) ||
+ (device != PCI_SLOT(ctrl->pci_dev->devfn)) ||
(function != PCI_FUNC(ctrl->pci_dev->devfn))) {
nummem = p_ev_ctrl->mem_avail;
numpmem = p_ev_ctrl->p_mem_avail;
@@ -491,7 +495,7 @@
if (p_byte > ((u8*)p_EV_header + evbuffer_length))
return 2;
- // Skip forward to the next entry
+ /* Skip forward to the next entry */
p_byte += (nummem + numpmem + numio + numbus) * 8;
if (p_byte > ((u8*)p_EV_header + evbuffer_length))
@@ -629,8 +633,9 @@
ctrl->bus_head = bus_node;
}
- // If all of the following fail, we don't have any resources for
- // hot plug add
+ /* If all of the following fail, we don't have any resources for
+ * hot plug add
+ */
rc = 1;
rc &= cpqhp_resource_sort_and_combine(&(ctrl->mem_head));
rc &= cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head));
@@ -640,14 +645,14 @@
if (rc)
return(rc);
} else {
- if ((evbuffer[0] != 0) && (!ctrl->push_flag))
+ if ((evbuffer[0] != 0) && (!ctrl->push_flag))
return 1;
}
return 0;
}
-
+
int compaq_nvram_store (void __iomem *rom_start)
{
int rc = 1;
diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c
index 6c0ed0f..6173b9a 100644
--- a/drivers/pci/hotplug/cpqphp_pci.c
+++ b/drivers/pci/hotplug/cpqphp_pci.c
@@ -37,7 +37,6 @@
#include "../pci.h"
#include "cpqphp.h"
#include "cpqphp_nvram.h"
-#include <asm/pci_x86.h>
u8 cpqhp_nic_irq;
@@ -82,14 +81,14 @@
}
-int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func)
+int cpqhp_configure_device (struct controller* ctrl, struct pci_func* func)
{
unsigned char bus;
struct pci_bus *child;
int num;
if (func->pci_dev == NULL)
- func->pci_dev = pci_find_slot(func->bus, PCI_DEVFN(func->device, func->function));
+ func->pci_dev = pci_get_bus_and_slot(func->bus,PCI_DEVFN(func->device, func->function));
/* No pci device, we need to create it then */
if (func->pci_dev == NULL) {
@@ -99,7 +98,7 @@
if (num)
pci_bus_add_devices(ctrl->pci_dev->bus);
- func->pci_dev = pci_find_slot(func->bus, PCI_DEVFN(func->device, func->function));
+ func->pci_dev = pci_get_bus_and_slot(func->bus, PCI_DEVFN(func->device, func->function));
if (func->pci_dev == NULL) {
dbg("ERROR: pci_dev still null\n");
return 0;
@@ -112,20 +111,24 @@
pci_do_scan_bus(child);
}
+ pci_dev_put(func->pci_dev);
+
return 0;
}
-int cpqhp_unconfigure_device(struct pci_func* func)
+int cpqhp_unconfigure_device(struct pci_func* func)
{
int j;
-
+
dbg("%s: bus/dev/func = %x/%x/%x\n", __func__, func->bus, func->device, func->function);
for (j=0; j<8 ; j++) {
- struct pci_dev* temp = pci_find_slot(func->bus, PCI_DEVFN(func->device, j));
- if (temp)
+ struct pci_dev* temp = pci_get_bus_and_slot(func->bus, PCI_DEVFN(func->device, j));
+ if (temp) {
+ pci_dev_put(temp);
pci_remove_bus_device(temp);
+ }
}
return 0;
}
@@ -178,32 +181,22 @@
if (!rc)
return !rc;
- // set the Edge Level Control Register (ELCR)
+ /* set the Edge Level Control Register (ELCR) */
temp_word = inb(0x4d0);
temp_word |= inb(0x4d1) << 8;
temp_word |= 0x01 << irq_num;
- // This should only be for x86 as it sets the Edge Level Control Register
- outb((u8) (temp_word & 0xFF), 0x4d0);
- outb((u8) ((temp_word & 0xFF00) >> 8), 0x4d1);
- rc = 0;
- }
+ /* This should only be for x86 as it sets the Edge Level
+ * Control Register
+ */
+ outb((u8) (temp_word & 0xFF), 0x4d0); outb((u8) ((temp_word &
+ 0xFF00) >> 8), 0x4d1); rc = 0; }
return rc;
}
-/*
- * WTF??? This function isn't in the code, yet a function calls it, but the
- * compiler optimizes it away? strange. Here as a placeholder to keep the
- * compiler happy.
- */
-static int PCI_ScanBusNonBridge (u8 bus, u8 device)
-{
- return 0;
-}
-
static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev_num)
{
u16 tdevice;
@@ -213,11 +206,11 @@
ctrl->pci_bus->number = bus_num;
for (tdevice = 0; tdevice < 0xFF; tdevice++) {
- //Scan for access first
+ /* Scan for access first */
if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1)
continue;
dbg("Looking for nonbridge bus_num %d dev_num %d\n", bus_num, tdevice);
- //Yep we got one. Not a bridge ?
+ /* Yep we got one. Not a bridge ? */
if ((work >> 8) != PCI_TO_PCI_BRIDGE_CLASS) {
*dev_num = tdevice;
dbg("found it !\n");
@@ -225,16 +218,16 @@
}
}
for (tdevice = 0; tdevice < 0xFF; tdevice++) {
- //Scan for access first
+ /* Scan for access first */
if (PCI_RefinedAccessConfig(ctrl->pci_bus, tdevice, 0x08, &work) == -1)
continue;
dbg("Looking for bridge bus_num %d dev_num %d\n", bus_num, tdevice);
- //Yep we got one. bridge ?
+ /* Yep we got one. bridge ? */
if ((work >> 8) == PCI_TO_PCI_BRIDGE_CLASS) {
pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(tdevice, 0), PCI_SECONDARY_BUS, &tbus);
+ /* XXX: no recursion, wtf? */
dbg("Recurse on bus_num %d tdevice %d\n", tbus, tdevice);
- if (PCI_ScanBusNonBridge(tbus, tdevice) == 0)
- return 0;
+ return 0;
}
}
@@ -244,39 +237,23 @@
static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num, u8 slot, u8 nobridge)
{
- struct irq_routing_table *PCIIRQRoutingInfoLength;
- long len;
- long loop;
+ int loop, len;
u32 work;
-
u8 tbus, tdevice, tslot;
- PCIIRQRoutingInfoLength = pcibios_get_irq_routing_table();
- if (!PCIIRQRoutingInfoLength)
- return -1;
-
- len = (PCIIRQRoutingInfoLength->size -
- sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
- // Make sure I got at least one entry
- if (len == 0) {
- kfree(PCIIRQRoutingInfoLength );
- return -1;
- }
-
+ len = cpqhp_routing_table_length();
for (loop = 0; loop < len; ++loop) {
- tbus = PCIIRQRoutingInfoLength->slots[loop].bus;
- tdevice = PCIIRQRoutingInfoLength->slots[loop].devfn;
- tslot = PCIIRQRoutingInfoLength->slots[loop].slot;
+ tbus = cpqhp_routing_table->slots[loop].bus;
+ tdevice = cpqhp_routing_table->slots[loop].devfn;
+ tslot = cpqhp_routing_table->slots[loop].slot;
if (tslot == slot) {
*bus_num = tbus;
*dev_num = tdevice;
ctrl->pci_bus->number = tbus;
pci_bus_read_config_dword (ctrl->pci_bus, *dev_num, PCI_VENDOR_ID, &work);
- if (!nobridge || (work == 0xffffffff)) {
- kfree(PCIIRQRoutingInfoLength );
+ if (!nobridge || (work == 0xffffffff))
return 0;
- }
dbg("bus_num %d devfn %d\n", *bus_num, *dev_num);
pci_bus_read_config_dword (ctrl->pci_bus, *dev_num, PCI_CLASS_REVISION, &work);
@@ -287,28 +264,26 @@
dbg("Scan bus for Non Bridge: bus %d\n", tbus);
if (PCI_ScanBusForNonBridge(ctrl, tbus, dev_num) == 0) {
*bus_num = tbus;
- kfree(PCIIRQRoutingInfoLength );
return 0;
}
- } else {
- kfree(PCIIRQRoutingInfoLength );
+ } else
return 0;
- }
-
}
}
- kfree(PCIIRQRoutingInfoLength );
return -1;
}
int cpqhp_get_bus_dev (struct controller *ctrl, u8 * bus_num, u8 * dev_num, u8 slot)
{
- return PCI_GetBusDevHelper(ctrl, bus_num, dev_num, slot, 0); //plain (bridges allowed)
+ /* plain (bridges allowed) */
+ return PCI_GetBusDevHelper(ctrl, bus_num, dev_num, slot, 0);
}
-/* More PCI configuration routines; this time centered around hotplug controller */
+/* More PCI configuration routines; this time centered around hotplug
+ * controller
+ */
/*
@@ -339,12 +314,12 @@
int stop_it;
int index;
- // Decide which slots are supported
+ /* Decide which slots are supported */
if (is_hot_plug) {
- //*********************************
- // is_hot_plug is the slot mask
- //*********************************
+ /*
+ * is_hot_plug is the slot mask
+ */
FirstSupported = is_hot_plug >> 4;
LastSupported = FirstSupported + (is_hot_plug & 0x0F) - 1;
} else {
@@ -352,123 +327,127 @@
LastSupported = 0x1F;
}
- // Save PCI configuration space for all devices in supported slots
+ /* Save PCI configuration space for all devices in supported slots */
ctrl->pci_bus->number = busnumber;
for (device = FirstSupported; device <= LastSupported; device++) {
ID = 0xFFFFFFFF;
- rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_VENDOR_ID, &ID);
+ rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_VENDOR_ID, &ID);
- if (ID != 0xFFFFFFFF) { // device in slot
- rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, 0), 0x0B, &class_code);
- if (rc)
- return rc;
-
- rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_HEADER_TYPE, &header_type);
- if (rc)
- return rc;
-
- // If multi-function device, set max_functions to 8
- if (header_type & 0x80)
- max_functions = 8;
- else
- max_functions = 1;
-
- function = 0;
-
- do {
- DevError = 0;
-
- if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // P-P Bridge
- // Recurse the subordinate bus
- // get the subordinate bus number
- rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_SECONDARY_BUS, &secondary_bus);
- if (rc) {
- return rc;
- } else {
- sub_bus = (int) secondary_bus;
-
- // Save secondary bus cfg spc
- // with this recursive call.
- rc = cpqhp_save_config(ctrl, sub_bus, 0);
- if (rc)
- return rc;
- ctrl->pci_bus->number = busnumber;
- }
- }
-
- index = 0;
- new_slot = cpqhp_slot_find(busnumber, device, index++);
- while (new_slot &&
- (new_slot->function != (u8) function))
- new_slot = cpqhp_slot_find(busnumber, device, index++);
-
- if (!new_slot) {
- // Setup slot structure.
- new_slot = cpqhp_slot_create(busnumber);
-
- if (new_slot == NULL)
- return(1);
- }
+ if (ID == 0xFFFFFFFF) {
+ if (is_hot_plug) {
+ /* Setup slot structure with entry for empty
+ * slot
+ */
+ new_slot = cpqhp_slot_create(busnumber);
+ if (new_slot == NULL)
+ return 1;
new_slot->bus = (u8) busnumber;
new_slot->device = (u8) device;
- new_slot->function = (u8) function;
- new_slot->is_a_board = 1;
- new_slot->switch_save = 0x10;
- // In case of unsupported board
- new_slot->status = DevError;
- new_slot->pci_dev = pci_find_slot(new_slot->bus, (new_slot->device << 3) | new_slot->function);
+ new_slot->function = 0;
+ new_slot->is_a_board = 0;
+ new_slot->presence_save = 0;
+ new_slot->switch_save = 0;
+ }
+ continue;
+ }
- for (cloop = 0; cloop < 0x20; cloop++) {
- rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop]));
+ rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, 0), 0x0B, &class_code);
+ if (rc)
+ return rc;
+
+ rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_HEADER_TYPE, &header_type);
+ if (rc)
+ return rc;
+
+ /* If multi-function device, set max_functions to 8 */
+ if (header_type & 0x80)
+ max_functions = 8;
+ else
+ max_functions = 1;
+
+ function = 0;
+
+ do {
+ DevError = 0;
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+ /* Recurse the subordinate bus
+ * get the subordinate bus number
+ */
+ rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_SECONDARY_BUS, &secondary_bus);
+ if (rc) {
+ return rc;
+ } else {
+ sub_bus = (int) secondary_bus;
+
+ /* Save secondary bus cfg spc
+ * with this recursive call.
+ */
+ rc = cpqhp_save_config(ctrl, sub_bus, 0);
if (rc)
return rc;
+ ctrl->pci_bus->number = busnumber;
}
+ }
- function++;
+ index = 0;
+ new_slot = cpqhp_slot_find(busnumber, device, index++);
+ while (new_slot &&
+ (new_slot->function != (u8) function))
+ new_slot = cpqhp_slot_find(busnumber, device, index++);
- stop_it = 0;
-
- // this loop skips to the next present function
- // reading in Class Code and Header type.
-
- while ((function < max_functions)&&(!stop_it)) {
- rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_VENDOR_ID, &ID);
- if (ID == 0xFFFFFFFF) { // nothing there.
- function++;
- } else { // Something there
- rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), 0x0B, &class_code);
- if (rc)
- return rc;
-
- rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_HEADER_TYPE, &header_type);
- if (rc)
- return rc;
-
- stop_it++;
- }
- }
-
- } while (function < max_functions);
- } // End of IF (device in slot?)
- else if (is_hot_plug) {
- // Setup slot structure with entry for empty slot
- new_slot = cpqhp_slot_create(busnumber);
-
- if (new_slot == NULL) {
- return(1);
+ if (!new_slot) {
+ /* Setup slot structure. */
+ new_slot = cpqhp_slot_create(busnumber);
+ if (new_slot == NULL)
+ return 1;
}
new_slot->bus = (u8) busnumber;
new_slot->device = (u8) device;
- new_slot->function = 0;
- new_slot->is_a_board = 0;
- new_slot->presence_save = 0;
- new_slot->switch_save = 0;
- }
- } // End of FOR loop
+ new_slot->function = (u8) function;
+ new_slot->is_a_board = 1;
+ new_slot->switch_save = 0x10;
+ /* In case of unsupported board */
+ new_slot->status = DevError;
+ new_slot->pci_dev = pci_get_bus_and_slot(new_slot->bus, (new_slot->device << 3) | new_slot->function);
- return(0);
+ for (cloop = 0; cloop < 0x20; cloop++) {
+ rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop]));
+ if (rc)
+ return rc;
+ }
+
+ pci_dev_put(new_slot->pci_dev);
+
+ function++;
+
+ stop_it = 0;
+
+ /* this loop skips to the next present function
+ * reading in Class Code and Header type.
+ */
+ while ((function < max_functions) && (!stop_it)) {
+ rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_VENDOR_ID, &ID);
+ if (ID == 0xFFFFFFFF) {
+ function++;
+ continue;
+ }
+ rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), 0x0B, &class_code);
+ if (rc)
+ return rc;
+
+ rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_HEADER_TYPE, &header_type);
+ if (rc)
+ return rc;
+
+ stop_it++;
+ }
+
+ } while (function < max_functions);
+ } /* End of FOR loop */
+
+ return 0;
}
@@ -489,7 +468,7 @@
u8 secondary_bus;
int sub_bus;
int max_functions;
- int function;
+ int function = 0;
int cloop = 0;
int stop_it;
@@ -498,63 +477,58 @@
ctrl->pci_bus->number = new_slot->bus;
pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_VENDOR_ID, &ID);
- if (ID != 0xFFFFFFFF) { // device in slot
- pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), 0x0B, &class_code);
- pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_HEADER_TYPE, &header_type);
-
- if (header_type & 0x80) // Multi-function device
- max_functions = 8;
- else
- max_functions = 1;
-
- function = 0;
-
- do {
- if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge
- // Recurse the subordinate bus
- pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_SECONDARY_BUS, &secondary_bus);
-
- sub_bus = (int) secondary_bus;
-
- // Save the config headers for the secondary bus.
- rc = cpqhp_save_config(ctrl, sub_bus, 0);
- if (rc)
- return(rc);
- ctrl->pci_bus->number = new_slot->bus;
-
- } // End of IF
-
- new_slot->status = 0;
-
- for (cloop = 0; cloop < 0x20; cloop++) {
- pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop]));
- }
-
- function++;
-
- stop_it = 0;
-
- // this loop skips to the next present function
- // reading in the Class Code and the Header type.
-
- while ((function < max_functions) && (!stop_it)) {
- pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_VENDOR_ID, &ID);
-
- if (ID == 0xFFFFFFFF) { // nothing there.
- function++;
- } else { // Something there
- pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), 0x0B, &class_code);
-
- pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_HEADER_TYPE, &header_type);
-
- stop_it++;
- }
- }
-
- } while (function < max_functions);
- } // End of IF (device in slot?)
- else {
+ if (ID == 0xFFFFFFFF)
return 2;
+
+ pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), 0x0B, &class_code);
+ pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, 0), PCI_HEADER_TYPE, &header_type);
+
+ if (header_type & 0x80) /* Multi-function device */
+ max_functions = 8;
+ else
+ max_functions = 1;
+
+ while (function < max_functions) {
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+ /* Recurse the subordinate bus */
+ pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_SECONDARY_BUS, &secondary_bus);
+
+ sub_bus = (int) secondary_bus;
+
+ /* Save the config headers for the secondary
+ * bus.
+ */
+ rc = cpqhp_save_config(ctrl, sub_bus, 0);
+ if (rc)
+ return(rc);
+ ctrl->pci_bus->number = new_slot->bus;
+
+ }
+
+ new_slot->status = 0;
+
+ for (cloop = 0; cloop < 0x20; cloop++)
+ pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop]));
+
+ function++;
+
+ stop_it = 0;
+
+ /* this loop skips to the next present function
+ * reading in the Class Code and the Header type.
+ */
+ while ((function < max_functions) && (!stop_it)) {
+ pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_VENDOR_ID, &ID);
+
+ if (ID == 0xFFFFFFFF)
+ function++;
+ else {
+ pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), 0x0B, &class_code);
+ pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(new_slot->device, function), PCI_HEADER_TYPE, &header_type);
+ stop_it++;
+ }
+ }
+
}
return 0;
@@ -590,11 +564,10 @@
pci_bus->number = func->bus;
devfn = PCI_DEVFN(func->device, func->function);
- // Check for Bridge
+ /* Check for Bridge */
pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
- // PCI-PCI Bridge
pci_bus_read_config_byte (pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
sub_bus = (int) secondary_bus;
@@ -610,23 +583,27 @@
}
pci_bus->number = func->bus;
- //FIXME: this loop is duplicated in the non-bridge case. The two could be rolled together
- // Figure out IO and memory base lengths
+ /* FIXME: this loop is duplicated in the non-bridge
+ * case. The two could be rolled together Figure out
+ * IO and memory base lengths
+ */
for (cloop = 0x10; cloop <= 0x14; cloop += 4) {
temp_register = 0xFFFFFFFF;
pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
pci_bus_read_config_dword (pci_bus, devfn, cloop, &base);
-
- if (base) { // If this register is implemented
+ /* If this register is implemented */
+ if (base) {
if (base & 0x01L) {
- // IO base
- // set base = amount of IO space requested
+ /* IO base
+ * set base = amount of IO space
+ * requested
+ */
base = base & 0xFFFFFFFE;
base = (~base) + 1;
type = 1;
} else {
- // memory base
+ /* memory base */
base = base & 0xFFFFFFF0;
base = (~base) + 1;
@@ -637,32 +614,36 @@
type = 0;
}
- // Save information in slot structure
+ /* Save information in slot structure */
func->base_length[(cloop - 0x10) >> 2] =
base;
func->base_type[(cloop - 0x10) >> 2] = type;
- } // End of base register loop
+ } /* End of base register loop */
-
- } else if ((header_type & 0x7F) == 0x00) { // PCI-PCI Bridge
- // Figure out IO and memory base lengths
+ } else if ((header_type & 0x7F) == 0x00) {
+ /* Figure out IO and memory base lengths */
for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
temp_register = 0xFFFFFFFF;
pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
pci_bus_read_config_dword (pci_bus, devfn, cloop, &base);
- if (base) { // If this register is implemented
+ /* If this register is implemented */
+ if (base) {
if (base & 0x01L) {
- // IO base
- // base = amount of IO space requested
+ /* IO base
+ * base = amount of IO space
+ * requested
+ */
base = base & 0xFFFFFFFE;
base = (~base) + 1;
type = 1;
} else {
- // memory base
- // base = amount of memory space requested
+ /* memory base
+ * base = amount of memory
+ * space requested
+ */
base = base & 0xFFFFFFF0;
base = (~base) + 1;
@@ -673,16 +654,16 @@
type = 0;
}
- // Save information in slot structure
+ /* Save information in slot structure */
func->base_length[(cloop - 0x10) >> 2] = base;
func->base_type[(cloop - 0x10) >> 2] = type;
- } // End of base register loop
+ } /* End of base register loop */
- } else { // Some other unknown header type
+ } else { /* Some other unknown header type */
}
- // find the next device in this slot
+ /* find the next device in this slot */
func = cpqhp_slot_find(func->bus, func->device, index++);
}
@@ -728,18 +709,18 @@
pci_bus->number = func->bus;
devfn = PCI_DEVFN(func->device, func->function);
- // Save the command register
+ /* Save the command register */
pci_bus_read_config_word(pci_bus, devfn, PCI_COMMAND, &save_command);
- // disable card
+ /* disable card */
command = 0x00;
pci_bus_write_config_word(pci_bus, devfn, PCI_COMMAND, command);
- // Check for Bridge
+ /* Check for Bridge */
pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
- if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge
- // Clear Bridge Control Register
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+ /* Clear Bridge Control Register */
command = 0x00;
pci_bus_write_config_word(pci_bus, devfn, PCI_BRIDGE_CONTROL, command);
pci_bus_read_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
@@ -755,7 +736,7 @@
bus_node->next = func->bus_head;
func->bus_head = bus_node;
- // Save IO base and Limit registers
+ /* Save IO base and Limit registers */
pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_BASE, &b_base);
pci_bus_read_config_byte(pci_bus, devfn, PCI_IO_LIMIT, &b_length);
@@ -771,7 +752,7 @@
func->io_head = io_node;
}
- // Save memory base and Limit registers
+ /* Save memory base and Limit registers */
pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_BASE, &w_base);
pci_bus_read_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, &w_length);
@@ -787,7 +768,7 @@
func->mem_head = mem_node;
}
- // Save prefetchable memory base and Limit registers
+ /* Save prefetchable memory base and Limit registers */
pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_BASE, &w_base);
pci_bus_read_config_word(pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &w_length);
@@ -802,7 +783,7 @@
p_mem_node->next = func->p_mem_head;
func->p_mem_head = p_mem_node;
}
- // Figure out IO and memory base lengths
+ /* Figure out IO and memory base lengths */
for (cloop = 0x10; cloop <= 0x14; cloop += 4) {
pci_bus_read_config_dword (pci_bus, devfn, cloop, &save_base);
@@ -812,11 +793,14 @@
temp_register = base;
- if (base) { // If this register is implemented
+ /* If this register is implemented */
+ if (base) {
if (((base & 0x03L) == 0x01)
&& (save_command & 0x01)) {
- // IO base
- // set temp_register = amount of IO space requested
+ /* IO base
+ * set temp_register = amount
+ * of IO space requested
+ */
temp_register = base & 0xFFFFFFFE;
temp_register = (~temp_register) + 1;
@@ -834,7 +818,7 @@
} else
if (((base & 0x0BL) == 0x08)
&& (save_command & 0x02)) {
- // prefetchable memory base
+ /* prefetchable memory base */
temp_register = base & 0xFFFFFFF0;
temp_register = (~temp_register) + 1;
@@ -851,7 +835,7 @@
} else
if (((base & 0x0BL) == 0x00)
&& (save_command & 0x02)) {
- // prefetchable memory base
+ /* prefetchable memory base */
temp_register = base & 0xFFFFFFF0;
temp_register = (~temp_register) + 1;
@@ -868,9 +852,10 @@
} else
return(1);
}
- } // End of base register loop
- } else if ((header_type & 0x7F) == 0x00) { // Standard header
- // Figure out IO and memory base lengths
+ } /* End of base register loop */
+ /* Standard header */
+ } else if ((header_type & 0x7F) == 0x00) {
+ /* Figure out IO and memory base lengths */
for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
pci_bus_read_config_dword(pci_bus, devfn, cloop, &save_base);
@@ -880,11 +865,14 @@
temp_register = base;
- if (base) { // If this register is implemented
+ /* If this register is implemented */
+ if (base) {
if (((base & 0x03L) == 0x01)
&& (save_command & 0x01)) {
- // IO base
- // set temp_register = amount of IO space requested
+ /* IO base
+ * set temp_register = amount
+ * of IO space requested
+ */
temp_register = base & 0xFFFFFFFE;
temp_register = (~temp_register) + 1;
@@ -901,7 +889,7 @@
} else
if (((base & 0x0BL) == 0x08)
&& (save_command & 0x02)) {
- // prefetchable memory base
+ /* prefetchable memory base */
temp_register = base & 0xFFFFFFF0;
temp_register = (~temp_register) + 1;
@@ -918,7 +906,7 @@
} else
if (((base & 0x0BL) == 0x00)
&& (save_command & 0x02)) {
- // prefetchable memory base
+ /* prefetchable memory base */
temp_register = base & 0xFFFFFFF0;
temp_register = (~temp_register) + 1;
@@ -935,15 +923,14 @@
} else
return(1);
}
- } // End of base register loop
- } else { // Some other unknown header type
+ } /* End of base register loop */
}
- // find the next device in this slot
+ /* find the next device in this slot */
func = cpqhp_slot_find(func->bus, func->device, index++);
}
- return(0);
+ return 0;
}
@@ -975,16 +962,16 @@
pci_bus->number = func->bus;
devfn = PCI_DEVFN(func->device, func->function);
- // Start at the top of config space so that the control
- // registers are programmed last
- for (cloop = 0x3C; cloop > 0; cloop -= 4) {
+ /* Start at the top of config space so that the control
+ * registers are programmed last
+ */
+ for (cloop = 0x3C; cloop > 0; cloop -= 4)
pci_bus_write_config_dword (pci_bus, devfn, cloop, func->config_space[cloop >> 2]);
- }
pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
- // If this is a bridge device, restore subordinate devices
- if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge
+ /* If this is a bridge device, restore subordinate devices */
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
pci_bus_read_config_byte (pci_bus, devfn, PCI_SECONDARY_BUS, &secondary_bus);
sub_bus = (int) secondary_bus;
@@ -1000,8 +987,9 @@
}
} else {
- // Check all the base Address Registers to make sure
- // they are the same. If not, the board is different.
+ /* Check all the base Address Registers to make sure
+ * they are the same. If not, the board is different.
+ */
for (cloop = 16; cloop < 40; cloop += 4) {
pci_bus_read_config_dword (pci_bus, devfn, cloop, &temp);
@@ -1058,27 +1046,28 @@
pci_bus_read_config_dword (pci_bus, devfn, PCI_VENDOR_ID, &temp_register);
- // No adapter present
+ /* No adapter present */
if (temp_register == 0xFFFFFFFF)
return(NO_ADAPTER_PRESENT);
if (temp_register != func->config_space[0])
return(ADAPTER_NOT_SAME);
- // Check for same revision number and class code
+ /* Check for same revision number and class code */
pci_bus_read_config_dword (pci_bus, devfn, PCI_CLASS_REVISION, &temp_register);
- // Adapter not the same
+ /* Adapter not the same */
if (temp_register != func->config_space[0x08 >> 2])
return(ADAPTER_NOT_SAME);
- // Check for Bridge
+ /* Check for Bridge */
pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
- if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { // PCI-PCI Bridge
- // In order to continue checking, we must program the
- // bus registers in the bridge to respond to accesses
- // for it's subordinate bus(es)
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+ /* In order to continue checking, we must program the
+ * bus registers in the bridge to respond to accesses
+ * for its subordinate bus(es)
+ */
temp_register = func->config_space[0x18 >> 2];
pci_bus_write_config_dword (pci_bus, devfn, PCI_PRIMARY_BUS, temp_register);
@@ -1096,35 +1085,39 @@
}
}
- // Check to see if it is a standard config header
+ /* Check to see if it is a standard config header */
else if ((header_type & 0x7F) == PCI_HEADER_TYPE_NORMAL) {
- // Check subsystem vendor and ID
+ /* Check subsystem vendor and ID */
pci_bus_read_config_dword (pci_bus, devfn, PCI_SUBSYSTEM_VENDOR_ID, &temp_register);
if (temp_register != func->config_space[0x2C >> 2]) {
- // If it's a SMART-2 and the register isn't filled
- // in, ignore the difference because
- // they just have an old rev of the firmware
-
+ /* If it's a SMART-2 and the register isn't
+ * filled in, ignore the difference because
+ * they just have an old rev of the firmware
+ */
if (!((func->config_space[0] == 0xAE100E11)
&& (temp_register == 0x00L)))
return(ADAPTER_NOT_SAME);
}
- // Figure out IO and memory base lengths
+ /* Figure out IO and memory base lengths */
for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
temp_register = 0xFFFFFFFF;
pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
pci_bus_read_config_dword (pci_bus, devfn, cloop, &base);
- if (base) { // If this register is implemented
+
+ /* If this register is implemented */
+ if (base) {
if (base & 0x01L) {
- // IO base
- // set base = amount of IO space requested
+ /* IO base
+ * set base = amount of IO
+ * space requested
+ */
base = base & 0xFFFFFFFE;
base = (~base) + 1;
type = 1;
} else {
- // memory base
+ /* memory base */
base = base & 0xFFFFFFF0;
base = (~base) + 1;
@@ -1135,23 +1128,24 @@
type = 0;
}
- // Check information in slot structure
+ /* Check information in slot structure */
if (func->base_length[(cloop - 0x10) >> 2] != base)
return(ADAPTER_NOT_SAME);
if (func->base_type[(cloop - 0x10) >> 2] != type)
return(ADAPTER_NOT_SAME);
- } // End of base register loop
+ } /* End of base register loop */
- } // End of (type 0 config space) else
+ } /* End of (type 0 config space) else */
else {
- // this is not a type 0 or 1 config space header so
- // we don't know how to do it
+ /* this is not a type 0 or 1 config space header so
+ * we don't know how to do it
+ */
return(DEVICE_TYPE_NOT_SUPPORTED);
}
- // Get the next function
+ /* Get the next function */
func = cpqhp_slot_find(func->bus, func->device, index++);
}
@@ -1168,7 +1162,7 @@
* this function is for hot plug ADD!
*
* returns 0 if success
- */
+ */
int cpqhp_find_available_resources(struct controller *ctrl, void __iomem *rom_start)
{
u8 temp;
@@ -1187,10 +1181,10 @@
rom_resource_table = detect_HRT_floating_pointer(rom_start, rom_start+0xffff);
dbg("rom_resource_table = %p\n", rom_resource_table);
- if (rom_resource_table == NULL) {
+ if (rom_resource_table == NULL)
return -ENODEV;
- }
- // Sum all resources and setup resource maps
+
+ /* Sum all resources and setup resource maps */
unused_IRQ = readl(rom_resource_table + UNUSED_IRQ);
dbg("unused_IRQ = %x\n", unused_IRQ);
@@ -1222,13 +1216,11 @@
temp = 0;
- if (!cpqhp_nic_irq) {
+ if (!cpqhp_nic_irq)
cpqhp_nic_irq = ctrl->cfgspc_irq;
- }
- if (!cpqhp_disk_irq) {
+ if (!cpqhp_disk_irq)
cpqhp_disk_irq = ctrl->cfgspc_irq;
- }
dbg("cpqhp_disk_irq, cpqhp_nic_irq= %d, %d\n", cpqhp_disk_irq, cpqhp_nic_irq);
@@ -1262,13 +1254,13 @@
dev_func, io_base, io_length, mem_base, mem_length, pre_mem_base, pre_mem_length,
primary_bus, secondary_bus, max_bus);
- // If this entry isn't for our controller's bus, ignore it
+ /* If this entry isn't for our controller's bus, ignore it */
if (primary_bus != ctrl->bus) {
i--;
one_slot += sizeof (struct slot_rt);
continue;
}
- // find out if this entry is for an occupied slot
+ /* find out if this entry is for an occupied slot */
ctrl->pci_bus->number = primary_bus;
pci_bus_read_config_dword (ctrl->pci_bus, dev_func, PCI_VENDOR_ID, &temp_dword);
dbg("temp_D_word = %x\n", temp_dword);
@@ -1282,13 +1274,13 @@
func = cpqhp_slot_find(primary_bus, dev_func >> 3, index++);
}
- // If we can't find a match, skip this table entry
+ /* If we can't find a match, skip this table entry */
if (!func) {
i--;
one_slot += sizeof (struct slot_rt);
continue;
}
- // this may not work and shouldn't be used
+ /* this may not work and shouldn't be used */
if (secondary_bus != primary_bus)
bridged_slot = 1;
else
@@ -1301,7 +1293,7 @@
}
- // If we've got a valid IO base, use it
+ /* If we've got a valid IO base, use it */
temp_dword = io_base + io_length;
@@ -1325,7 +1317,7 @@
}
}
- // If we've got a valid memory base, use it
+ /* If we've got a valid memory base, use it */
temp_dword = mem_base + mem_length;
if ((mem_base) && (temp_dword < 0x10000)) {
mem_node = kmalloc(sizeof(*mem_node), GFP_KERNEL);
@@ -1348,8 +1340,9 @@
}
}
- // If we've got a valid prefetchable memory base, and
- // the base + length isn't greater than 0xFFFF
+ /* If we've got a valid prefetchable memory base, and
+ * the base + length isn't greater than 0xFFFF
+ */
temp_dword = pre_mem_base + pre_mem_length;
if ((pre_mem_base) && (temp_dword < 0x10000)) {
p_mem_node = kmalloc(sizeof(*p_mem_node), GFP_KERNEL);
@@ -1372,9 +1365,10 @@
}
}
- // If we've got a valid bus number, use it
- // The second condition is to ignore bus numbers on
- // populated slots that don't have PCI-PCI bridges
+ /* If we've got a valid bus number, use it
+ * The second condition is to ignore bus numbers on
+ * populated slots that don't have PCI-PCI bridges
+ */
if (secondary_bus && (secondary_bus != primary_bus)) {
bus_node = kmalloc(sizeof(*bus_node), GFP_KERNEL);
if (!bus_node)
@@ -1398,8 +1392,9 @@
one_slot += sizeof (struct slot_rt);
}
- // If all of the following fail, we don't have any resources for
- // hot plug add
+ /* If all of the following fail, we don't have any resources for
+ * hot plug add
+ */
rc = 1;
rc &= cpqhp_resource_sort_and_combine(&(ctrl->mem_head));
rc &= cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head));
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index 42e4260..7485ffd 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -1318,7 +1318,6 @@
}
struct hotplug_slot_ops ibmphp_hotplug_slot_ops = {
- .owner = THIS_MODULE,
.set_attention_status = set_attention_status,
.enable_slot = enable_slot,
.disable_slot = ibmphp_disable_slot,
@@ -1421,3 +1420,4 @@
}
module_init(ibmphp_init);
+module_exit(ibmphp_exit);
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index 535fce0..8445804 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -347,125 +347,129 @@
.store = test_write_file
};
-static int has_power_file(struct pci_slot *pci_slot)
+static bool has_power_file(struct pci_slot *pci_slot)
{
struct hotplug_slot *slot = pci_slot->hotplug;
if ((!slot) || (!slot->ops))
- return -ENODEV;
+ return false;
if ((slot->ops->enable_slot) ||
(slot->ops->disable_slot) ||
(slot->ops->get_power_status))
- return 0;
- return -ENOENT;
+ return true;
+ return false;
}
-static int has_attention_file(struct pci_slot *pci_slot)
+static bool has_attention_file(struct pci_slot *pci_slot)
{
struct hotplug_slot *slot = pci_slot->hotplug;
if ((!slot) || (!slot->ops))
- return -ENODEV;
+ return false;
if ((slot->ops->set_attention_status) ||
(slot->ops->get_attention_status))
- return 0;
- return -ENOENT;
+ return true;
+ return false;
}
-static int has_latch_file(struct pci_slot *pci_slot)
+static bool has_latch_file(struct pci_slot *pci_slot)
{
struct hotplug_slot *slot = pci_slot->hotplug;
if ((!slot) || (!slot->ops))
- return -ENODEV;
+ return false;
if (slot->ops->get_latch_status)
- return 0;
- return -ENOENT;
+ return true;
+ return false;
}
-static int has_adapter_file(struct pci_slot *pci_slot)
+static bool has_adapter_file(struct pci_slot *pci_slot)
{
struct hotplug_slot *slot = pci_slot->hotplug;
if ((!slot) || (!slot->ops))
- return -ENODEV;
+ return false;
if (slot->ops->get_adapter_status)
- return 0;
- return -ENOENT;
+ return true;
+ return false;
}
-static int has_max_bus_speed_file(struct pci_slot *pci_slot)
+static bool has_max_bus_speed_file(struct pci_slot *pci_slot)
{
struct hotplug_slot *slot = pci_slot->hotplug;
if ((!slot) || (!slot->ops))
- return -ENODEV;
+ return false;
if (slot->ops->get_max_bus_speed)
- return 0;
- return -ENOENT;
+ return true;
+ return false;
}
-static int has_cur_bus_speed_file(struct pci_slot *pci_slot)
+static bool has_cur_bus_speed_file(struct pci_slot *pci_slot)
{
struct hotplug_slot *slot = pci_slot->hotplug;
if ((!slot) || (!slot->ops))
- return -ENODEV;
+ return false;
if (slot->ops->get_cur_bus_speed)
- return 0;
- return -ENOENT;
+ return true;
+ return false;
}
-static int has_test_file(struct pci_slot *pci_slot)
+static bool has_test_file(struct pci_slot *pci_slot)
{
struct hotplug_slot *slot = pci_slot->hotplug;
if ((!slot) || (!slot->ops))
- return -ENODEV;
+ return false;
if (slot->ops->hardware_test)
- return 0;
- return -ENOENT;
+ return true;
+ return false;
}
static int fs_add_slot(struct pci_slot *slot)
{
int retval = 0;
- if (has_power_file(slot) == 0) {
- retval = sysfs_create_file(&slot->kobj, &hotplug_slot_attr_power.attr);
+ /* Create symbolic link to the hotplug driver module */
+ pci_hp_create_module_link(slot);
+
+ if (has_power_file(slot)) {
+ retval = sysfs_create_file(&slot->kobj,
+ &hotplug_slot_attr_power.attr);
if (retval)
goto exit_power;
}
- if (has_attention_file(slot) == 0) {
+ if (has_attention_file(slot)) {
retval = sysfs_create_file(&slot->kobj,
&hotplug_slot_attr_attention.attr);
if (retval)
goto exit_attention;
}
- if (has_latch_file(slot) == 0) {
+ if (has_latch_file(slot)) {
retval = sysfs_create_file(&slot->kobj,
&hotplug_slot_attr_latch.attr);
if (retval)
goto exit_latch;
}
- if (has_adapter_file(slot) == 0) {
+ if (has_adapter_file(slot)) {
retval = sysfs_create_file(&slot->kobj,
&hotplug_slot_attr_presence.attr);
if (retval)
goto exit_adapter;
}
- if (has_max_bus_speed_file(slot) == 0) {
+ if (has_max_bus_speed_file(slot)) {
retval = sysfs_create_file(&slot->kobj,
- &hotplug_slot_attr_max_bus_speed.attr);
+ &hotplug_slot_attr_max_bus_speed.attr);
if (retval)
goto exit_max_speed;
}
- if (has_cur_bus_speed_file(slot) == 0) {
+ if (has_cur_bus_speed_file(slot)) {
retval = sysfs_create_file(&slot->kobj,
- &hotplug_slot_attr_cur_bus_speed.attr);
+ &hotplug_slot_attr_cur_bus_speed.attr);
if (retval)
goto exit_cur_speed;
}
- if (has_test_file(slot) == 0) {
+ if (has_test_file(slot)) {
retval = sysfs_create_file(&slot->kobj,
&hotplug_slot_attr_test.attr);
if (retval)
@@ -475,55 +479,61 @@
goto exit;
exit_test:
- if (has_cur_bus_speed_file(slot) == 0)
- sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_cur_bus_speed.attr);
-
+ if (has_cur_bus_speed_file(slot))
+ sysfs_remove_file(&slot->kobj,
+ &hotplug_slot_attr_cur_bus_speed.attr);
exit_cur_speed:
- if (has_max_bus_speed_file(slot) == 0)
- sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_max_bus_speed.attr);
-
+ if (has_max_bus_speed_file(slot))
+ sysfs_remove_file(&slot->kobj,
+ &hotplug_slot_attr_max_bus_speed.attr);
exit_max_speed:
- if (has_adapter_file(slot) == 0)
- sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_presence.attr);
-
+ if (has_adapter_file(slot))
+ sysfs_remove_file(&slot->kobj,
+ &hotplug_slot_attr_presence.attr);
exit_adapter:
- if (has_latch_file(slot) == 0)
+ if (has_latch_file(slot))
sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_latch.attr);
-
exit_latch:
- if (has_attention_file(slot) == 0)
- sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_attention.attr);
-
+ if (has_attention_file(slot))
+ sysfs_remove_file(&slot->kobj,
+ &hotplug_slot_attr_attention.attr);
exit_attention:
- if (has_power_file(slot) == 0)
+ if (has_power_file(slot))
sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_power.attr);
exit_power:
+ pci_hp_remove_module_link(slot);
exit:
return retval;
}
static void fs_remove_slot(struct pci_slot *slot)
{
- if (has_power_file(slot) == 0)
+ if (has_power_file(slot))
sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_power.attr);
- if (has_attention_file(slot) == 0)
- sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_attention.attr);
+ if (has_attention_file(slot))
+ sysfs_remove_file(&slot->kobj,
+ &hotplug_slot_attr_attention.attr);
- if (has_latch_file(slot) == 0)
+ if (has_latch_file(slot))
sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_latch.attr);
- if (has_adapter_file(slot) == 0)
- sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_presence.attr);
+ if (has_adapter_file(slot))
+ sysfs_remove_file(&slot->kobj,
+ &hotplug_slot_attr_presence.attr);
- if (has_max_bus_speed_file(slot) == 0)
- sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_max_bus_speed.attr);
+ if (has_max_bus_speed_file(slot))
+ sysfs_remove_file(&slot->kobj,
+ &hotplug_slot_attr_max_bus_speed.attr);
- if (has_cur_bus_speed_file(slot) == 0)
- sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_cur_bus_speed.attr);
+ if (has_cur_bus_speed_file(slot))
+ sysfs_remove_file(&slot->kobj,
+ &hotplug_slot_attr_cur_bus_speed.attr);
- if (has_test_file(slot) == 0)
+ if (has_test_file(slot))
sysfs_remove_file(&slot->kobj, &hotplug_slot_attr_test.attr);
+
+ pci_hp_remove_module_link(slot);
}
static struct hotplug_slot *get_slot_from_name (const char *name)
@@ -540,10 +550,10 @@
}
/**
- * pci_hp_register - register a hotplug_slot with the PCI hotplug subsystem
+ * __pci_hp_register - register a hotplug_slot with the PCI hotplug subsystem
* @bus: bus this slot is on
* @slot: pointer to the &struct hotplug_slot to register
- * @slot_nr: slot number
+ * @devnr: device number
* @name: name registered with kobject core
*
* Registers a hotplug slot with the pci hotplug subsystem, which will allow
@@ -551,8 +561,9 @@
*
* Returns 0 if successful, anything else for an error.
*/
-int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr,
- const char *name)
+int __pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus,
+ int devnr, const char *name,
+ struct module *owner, const char *mod_name)
{
int result;
struct pci_slot *pci_slot;
@@ -567,14 +578,16 @@
return -EINVAL;
}
- mutex_lock(&pci_hp_mutex);
+ slot->ops->owner = owner;
+ slot->ops->mod_name = mod_name;
+ mutex_lock(&pci_hp_mutex);
/*
* No problems if we call this interface from both ACPI_PCI_SLOT
* driver and call it here again. If we've already created the
* pci_slot, the interface will simply bump the refcount.
*/
- pci_slot = pci_create_slot(bus, slot_nr, name, slot);
+ pci_slot = pci_create_slot(bus, devnr, name, slot);
if (IS_ERR(pci_slot)) {
result = PTR_ERR(pci_slot);
goto out;
@@ -684,6 +697,6 @@
module_param(debug, bool, 0644);
MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
-EXPORT_SYMBOL_GPL(pci_hp_register);
+EXPORT_SYMBOL_GPL(__pci_hp_register);
EXPORT_SYMBOL_GPL(pci_hp_deregister);
EXPORT_SYMBOL_GPL(pci_hp_change_slot_info);
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index 0a36854..e6cf096 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -81,7 +81,6 @@
struct hpc_ops *hpc_ops;
struct hotplug_slot *hotplug_slot;
struct list_head slot_list;
- unsigned long last_emi_toggle;
struct delayed_work work; /* work for button event */
struct mutex lock;
};
@@ -203,8 +202,6 @@
int (*set_attention_status)(struct slot *slot, u8 status);
int (*get_latch_status)(struct slot *slot, u8 *status);
int (*get_adapter_status)(struct slot *slot, u8 *status);
- int (*get_emi_status)(struct slot *slot, u8 *status);
- int (*toggle_emi)(struct slot *slot);
int (*get_max_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
int (*get_cur_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
int (*get_max_lnk_width)(struct slot *slot, enum pcie_link_width *val);
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index fb254b2..2317557 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -73,7 +73,6 @@
static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
static struct hotplug_slot_ops pciehp_hotplug_slot_ops = {
- .owner = THIS_MODULE,
.set_attention_status = set_attention_status,
.enable_slot = enable_slot,
.disable_slot = disable_slot,
@@ -85,99 +84,6 @@
.get_cur_bus_speed = get_cur_bus_speed,
};
-/*
- * Check the status of the Electro Mechanical Interlock (EMI)
- */
-static int get_lock_status(struct hotplug_slot *hotplug_slot, u8 *value)
-{
- struct slot *slot = hotplug_slot->private;
- return (slot->hpc_ops->get_emi_status(slot, value));
-}
-
-/*
- * sysfs interface for the Electro Mechanical Interlock (EMI)
- * 1 == locked, 0 == unlocked
- */
-static ssize_t lock_read_file(struct hotplug_slot *slot, char *buf)
-{
- int retval;
- u8 value;
-
- retval = get_lock_status(slot, &value);
- if (retval)
- goto lock_read_exit;
- retval = sprintf (buf, "%d\n", value);
-
-lock_read_exit:
- return retval;
-}
-
-/*
- * Change the status of the Electro Mechanical Interlock (EMI)
- * This is a toggle - in addition there must be at least 1 second
- * in between toggles.
- */
-static int set_lock_status(struct hotplug_slot *hotplug_slot, u8 status)
-{
- struct slot *slot = hotplug_slot->private;
- int retval;
- u8 value;
-
- mutex_lock(&slot->ctrl->crit_sect);
-
- /* has it been >1 sec since our last toggle? */
- if ((get_seconds() - slot->last_emi_toggle) < 1) {
- mutex_unlock(&slot->ctrl->crit_sect);
- return -EINVAL;
- }
-
- /* see what our current state is */
- retval = get_lock_status(hotplug_slot, &value);
- if (retval || (value == status))
- goto set_lock_exit;
-
- slot->hpc_ops->toggle_emi(slot);
-set_lock_exit:
- mutex_unlock(&slot->ctrl->crit_sect);
- return 0;
-}
-
-/*
- * sysfs interface which allows the user to toggle the Electro Mechanical
- * Interlock. Valid values are either 0 or 1. 0 == unlock, 1 == lock
- */
-static ssize_t lock_write_file(struct hotplug_slot *hotplug_slot,
- const char *buf, size_t count)
-{
- struct slot *slot = hotplug_slot->private;
- unsigned long llock;
- u8 lock;
- int retval = 0;
-
- llock = simple_strtoul(buf, NULL, 10);
- lock = (u8)(llock & 0xff);
-
- switch (lock) {
- case 0:
- case 1:
- retval = set_lock_status(hotplug_slot, lock);
- break;
- default:
- ctrl_err(slot->ctrl, "%d is an invalid lock value\n",
- lock);
- retval = -EINVAL;
- }
- if (retval)
- return retval;
- return count;
-}
-
-static struct hotplug_slot_attribute hotplug_slot_attr_lock = {
- .attr = {.name = "lock", .mode = S_IFREG | S_IRUGO | S_IWUSR},
- .show = lock_read_file,
- .store = lock_write_file
-};
-
/**
* release_slot - free up the memory used by a slot
* @hotplug_slot: slot to free
@@ -236,17 +142,6 @@
get_attention_status(hotplug_slot, &info->attention_status);
get_latch_status(hotplug_slot, &info->latch_status);
get_adapter_status(hotplug_slot, &info->adapter_status);
- /* create additional sysfs entries */
- if (EMI(ctrl)) {
- retval = sysfs_create_file(&hotplug_slot->pci_slot->kobj,
- &hotplug_slot_attr_lock.attr);
- if (retval) {
- pci_hp_deregister(hotplug_slot);
- ctrl_err(ctrl, "Cannot create additional sysfs "
- "entries\n");
- goto error_info;
- }
- }
}
return 0;
@@ -261,13 +156,8 @@
static void cleanup_slots(struct controller *ctrl)
{
struct slot *slot;
-
- list_for_each_entry(slot, &ctrl->slot_list, slot_list) {
- if (EMI(ctrl))
- sysfs_remove_file(&slot->hotplug_slot->pci_slot->kobj,
- &hotplug_slot_attr_lock.attr);
+ list_for_each_entry(slot, &ctrl->slot_list, slot_list)
pci_hp_deregister(slot->hotplug_slot);
- }
}
/*
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 07bd321..5281325 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -422,35 +422,6 @@
return !!(slot_status & PCI_EXP_SLTSTA_PFD);
}
-static int hpc_get_emi_status(struct slot *slot, u8 *status)
-{
- struct controller *ctrl = slot->ctrl;
- u16 slot_status;
- int retval;
-
- retval = pciehp_readw(ctrl, PCI_EXP_SLTSTA, &slot_status);
- if (retval) {
- ctrl_err(ctrl, "Cannot check EMI status\n");
- return retval;
- }
- *status = !!(slot_status & PCI_EXP_SLTSTA_EIS);
- return retval;
-}
-
-static int hpc_toggle_emi(struct slot *slot)
-{
- u16 slot_cmd;
- u16 cmd_mask;
- int rc;
-
- slot_cmd = PCI_EXP_SLTCTL_EIC;
- cmd_mask = PCI_EXP_SLTCTL_EIC;
- rc = pcie_write_cmd(slot->ctrl, slot_cmd, cmd_mask);
- slot->last_emi_toggle = get_seconds();
-
- return rc;
-}
-
static int hpc_set_attention_status(struct slot *slot, u8 value)
{
struct controller *ctrl = slot->ctrl;
@@ -874,8 +845,6 @@
.get_attention_status = hpc_get_attention_status,
.get_latch_status = hpc_get_latch_status,
.get_adapter_status = hpc_get_adapter_status,
- .get_emi_status = hpc_get_emi_status,
- .toggle_emi = hpc_toggle_emi,
.get_max_bus_speed = hpc_get_max_lnk_speed,
.get_cur_bus_speed = hpc_get_cur_lnk_speed,
diff --git a/drivers/pci/hotplug/pcihp_skeleton.c b/drivers/pci/hotplug/pcihp_skeleton.c
index e3dd6cf..5175d9b 100644
--- a/drivers/pci/hotplug/pcihp_skeleton.c
+++ b/drivers/pci/hotplug/pcihp_skeleton.c
@@ -82,7 +82,6 @@
static int get_adapter_status (struct hotplug_slot *slot, u8 *value);
static struct hotplug_slot_ops skel_hotplug_slot_ops = {
- .owner = THIS_MODULE,
.enable_slot = enable_slot,
.disable_slot = disable_slot,
.set_attention_status = set_attention_status,
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index 95d02a0..c159223 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -423,7 +423,6 @@
}
struct hotplug_slot_ops rpaphp_hotplug_slot_ops = {
- .owner = THIS_MODULE,
.enable_slot = enable_slot,
.disable_slot = disable_slot,
.set_attention_status = set_attention_status,
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index 2d6da78..a4494d7 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -83,7 +83,6 @@
static inline int get_power_status(struct hotplug_slot *slot, u8 *value);
static struct hotplug_slot_ops sn_hotplug_slot_ops = {
- .owner = THIS_MODULE,
.enable_slot = enable_slot,
.disable_slot = disable_slot,
.get_power_status = get_power_status,
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index fe8d149..8a520a3 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -69,7 +69,6 @@
static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
static struct hotplug_slot_ops shpchp_hotplug_slot_ops = {
- .owner = THIS_MODULE,
.set_attention_status = set_attention_status,
.enable_slot = enable_slot,
.disable_slot = disable_slot,
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index b497daa..03c7706 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -110,7 +110,7 @@
}
if (reset)
- pci_execute_reset_function(virtfn);
+ __pci_reset_function(virtfn);
pci_device_add(virtfn, virtfn->bus);
mutex_unlock(&iov->dev->sriov->lock);
@@ -164,7 +164,7 @@
if (reset) {
device_release_driver(&virtfn->dev);
- pci_execute_reset_function(virtfn);
+ __pci_reset_function(virtfn);
}
sprintf(buf, "virtfn%u", id);
@@ -487,6 +487,8 @@
iov->self = dev;
pci_read_config_dword(dev, pos + PCI_SRIOV_CAP, &iov->cap);
pci_read_config_byte(dev, pos + PCI_SRIOV_FUNC_LINK, &iov->link);
+ if (dev->pcie_type == PCI_EXP_TYPE_RC_END)
+ iov->link = PCI_DEVFN(PCI_SLOT(dev->devfn), iov->link);
if (pdev)
iov->dev = pci_dev_get(pdev);
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 3627732..d9f06fb 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -75,22 +75,17 @@
}
#endif
-static void __msi_set_enable(struct pci_dev *dev, int pos, int enable)
+static void msi_set_enable(struct pci_dev *dev, int pos, int enable)
{
u16 control;
- if (pos) {
- pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
- control &= ~PCI_MSI_FLAGS_ENABLE;
- if (enable)
- control |= PCI_MSI_FLAGS_ENABLE;
- pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
- }
-}
+ BUG_ON(!pos);
-static void msi_set_enable(struct pci_dev *dev, int enable)
-{
- __msi_set_enable(dev, pci_find_capability(dev, PCI_CAP_ID_MSI), enable);
+ pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
+ control &= ~PCI_MSI_FLAGS_ENABLE;
+ if (enable)
+ control |= PCI_MSI_FLAGS_ENABLE;
+ pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
}
static void msix_set_enable(struct pci_dev *dev, int enable)
@@ -131,9 +126,6 @@
* mask all MSI interrupts by clearing the MSI enable bit does not work
* reliably as devices without an INTx disable bit will then generate a
* level IRQ which will never be cleared.
- *
- * Returns 1 if it succeeded in masking the interrupt and 0 if the device
- * doesn't support MSI masking.
*/
static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
{
@@ -303,7 +295,7 @@
pos = entry->msi_attrib.pos;
pci_intx_for_msi(dev, 0);
- msi_set_enable(dev, 0);
+ msi_set_enable(dev, pos, 0);
write_msi_msg(dev->irq, &entry->msg);
pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
@@ -321,22 +313,22 @@
if (!dev->msix_enabled)
return;
+ BUG_ON(list_empty(&dev->msi_list));
+ entry = list_entry(dev->msi_list.next, struct msi_desc, list);
+ pos = entry->msi_attrib.pos;
+ pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control);
/* route the table */
pci_intx_for_msi(dev, 0);
- msix_set_enable(dev, 0);
+ control |= PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL;
+ pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
list_for_each_entry(entry, &dev->msi_list, list) {
write_msi_msg(entry->irq, &entry->msg);
msix_mask_irq(entry, entry->masked);
}
- BUG_ON(list_empty(&dev->msi_list));
- entry = list_entry(dev->msi_list.next, struct msi_desc, list);
- pos = entry->msi_attrib.pos;
- pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control);
control &= ~PCI_MSIX_FLAGS_MASKALL;
- control |= PCI_MSIX_FLAGS_ENABLE;
pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
}
@@ -365,9 +357,9 @@
u16 control;
unsigned mask;
- msi_set_enable(dev, 0); /* Ensure msi is disabled as I set it up */
-
pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
+ msi_set_enable(dev, pos, 0); /* Disable MSI during set up */
+
pci_read_config_word(dev, msi_control_reg(pos), &control);
/* MSI Entry Initialization */
entry = alloc_msi_entry(dev);
@@ -381,7 +373,7 @@
entry->msi_attrib.default_irq = dev->irq; /* Save IOAPIC IRQ */
entry->msi_attrib.pos = pos;
- entry->mask_pos = msi_mask_bits_reg(pos, entry->msi_attrib.is_64);
+ entry->mask_pos = msi_mask_reg(pos, entry->msi_attrib.is_64);
/* All MSIs are unmasked by default, Mask them all */
if (entry->msi_attrib.maskbit)
pci_read_config_dword(dev, entry->mask_pos, &entry->masked);
@@ -399,7 +391,7 @@
/* Set MSI enabled bits */
pci_intx_for_msi(dev, 0);
- msi_set_enable(dev, 1);
+ msi_set_enable(dev, pos, 1);
dev->msi_enabled = 1;
dev->irq = entry->irq;
@@ -427,11 +419,14 @@
u8 bir;
void __iomem *base;
- msix_set_enable(dev, 0);/* Ensure msix is disabled as I set it up */
-
pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
+ pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control);
+
+ /* Ensure MSI-X is disabled while it is set up */
+ control &= ~PCI_MSIX_FLAGS_ENABLE;
+ pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
+
/* Request & Map MSI-X table region */
- pci_read_config_word(dev, msi_control_reg(pos), &control);
nr_entries = multi_msix_capable(control);
pci_read_config_dword(dev, msix_table_offset_reg(pos), &table_offset);
@@ -442,7 +437,6 @@
if (base == NULL)
return -ENOMEM;
- /* MSI-X Table Initialization */
for (i = 0; i < nvec; i++) {
entry = alloc_msi_entry(dev);
if (!entry)
@@ -455,7 +449,6 @@
entry->msi_attrib.default_irq = dev->irq;
entry->msi_attrib.pos = pos;
entry->mask_base = base;
- msix_mask_irq(entry, 1);
list_add_tail(&entry->list, &dev->msi_list);
}
@@ -480,22 +473,31 @@
return ret;
}
+ /*
+ * Some devices require MSI-X to be enabled before we can touch the
+ * MSI-X registers. We need to mask all the vectors to prevent
+ * interrupts coming in before they're fully set up.
+ */
+ control |= PCI_MSIX_FLAGS_MASKALL | PCI_MSIX_FLAGS_ENABLE;
+ pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
+
i = 0;
list_for_each_entry(entry, &dev->msi_list, list) {
entries[i].vector = entry->irq;
set_irq_msi(entry->irq, entry);
+ j = entries[i].entry;
+ entry->masked = readl(base + j * PCI_MSIX_ENTRY_SIZE +
+ PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
+ msix_mask_irq(entry, 1);
i++;
}
- /* Set MSI-X enabled bits */
+
+ /* Set MSI-X enabled bits and unmask the function */
pci_intx_for_msi(dev, 0);
- msix_set_enable(dev, 1);
dev->msix_enabled = 1;
- list_for_each_entry(entry, &dev->msi_list, list) {
- int vector = entry->msi_attrib.entry_nr;
- entry->masked = readl(base + vector * PCI_MSIX_ENTRY_SIZE +
- PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
- }
+ control &= ~PCI_MSIX_FLAGS_MASKALL;
+ pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
return 0;
}
@@ -596,17 +598,20 @@
struct msi_desc *desc;
u32 mask;
u16 ctrl;
+ unsigned pos;
if (!pci_msi_enable || !dev || !dev->msi_enabled)
return;
- msi_set_enable(dev, 0);
+ BUG_ON(list_empty(&dev->msi_list));
+ desc = list_first_entry(&dev->msi_list, struct msi_desc, list);
+ pos = desc->msi_attrib.pos;
+
+ msi_set_enable(dev, pos, 0);
pci_intx_for_msi(dev, 1);
dev->msi_enabled = 0;
- BUG_ON(list_empty(&dev->msi_list));
- desc = list_first_entry(&dev->msi_list, struct msi_desc, list);
- pci_read_config_word(dev, desc->msi_attrib.pos + PCI_MSI_FLAGS, &ctrl);
+ pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &ctrl);
mask = msi_capable_mask(ctrl);
msi_mask_irq(desc, mask, ~mask);
@@ -648,10 +653,7 @@
list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) {
if (entry->msi_attrib.is_msix) {
- writel(1, entry->mask_base + entry->msi_attrib.entry_nr
- * PCI_MSIX_ENTRY_SIZE
- + PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
-
+ msix_mask_irq(entry, 1);
if (list_is_last(&entry->list, &dev->msi_list))
iounmap(entry->mask_base);
}
@@ -691,8 +693,8 @@
* indicates the successful configuration of MSI-X capability structure
* with new allocated MSI-X irqs. A return of < 0 indicates a failure.
* Or a return of > 0 indicates that driver request is exceeding the number
- * of irqs available. Driver should use the returned value to re-send
- * its request.
+ * of irqs or MSI-X vectors available. Driver should use the returned value to
+ * re-send its request.
**/
int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec)
{
@@ -708,7 +710,7 @@
nr_entries = pci_msix_table_size(dev);
if (nvec > nr_entries)
- return -EINVAL;
+ return nr_entries;
/* Check for any invalid entries */
for (i = 0; i < nvec; i++) {
diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h
index 71f4df2..a066284 100644
--- a/drivers/pci/msi.h
+++ b/drivers/pci/msi.h
@@ -16,21 +16,15 @@
#define msi_lower_address_reg(base) (base + PCI_MSI_ADDRESS_LO)
#define msi_upper_address_reg(base) (base + PCI_MSI_ADDRESS_HI)
#define msi_data_reg(base, is64bit) \
- ( (is64bit == 1) ? base+PCI_MSI_DATA_64 : base+PCI_MSI_DATA_32 )
-#define msi_mask_bits_reg(base, is64bit) \
- ( (is64bit == 1) ? base+PCI_MSI_MASK_BIT : base+PCI_MSI_MASK_BIT-4)
-#define msi_disable(control) control &= ~PCI_MSI_FLAGS_ENABLE
+ (base + ((is64bit == 1) ? PCI_MSI_DATA_64 : PCI_MSI_DATA_32))
+#define msi_mask_reg(base, is64bit) \
+ (base + ((is64bit == 1) ? PCI_MSI_MASK_64 : PCI_MSI_MASK_32))
#define is_64bit_address(control) (!!(control & PCI_MSI_FLAGS_64BIT))
#define is_mask_bit_support(control) (!!(control & PCI_MSI_FLAGS_MASKBIT))
#define msix_table_offset_reg(base) (base + 0x04)
#define msix_pba_offset_reg(base) (base + 0x08)
-#define msix_enable(control) control |= PCI_MSIX_FLAGS_ENABLE
-#define msix_disable(control) control &= ~PCI_MSIX_FLAGS_ENABLE
#define msix_table_size(control) ((control & PCI_MSIX_FLAGS_QSIZE)+1)
-#define multi_msix_capable msix_table_size
-#define msix_unmask(address) (address & ~PCI_MSIX_FLAGS_BITMASK)
-#define msix_mask(address) (address | PCI_MSIX_FLAGS_BITMASK)
-#define msix_is_pending(address) (address & PCI_MSIX_FLAGS_PENDMASK)
+#define multi_msix_capable(control) msix_table_size((control))
#endif /* MSI_H */
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 07bbb9b..6c93af5 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -485,6 +485,8 @@
pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
pmcsr |= state;
break;
+ case PCI_D3hot:
+ case PCI_D3cold:
case PCI_UNKNOWN: /* Boot-up */
if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
&& !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
@@ -1208,7 +1210,7 @@
* Error code depending on the platform is returned if both the platform and
* the native mechanism fail to enable the generation of wake-up events
*/
-int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable)
+int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable)
{
int error = 0;
bool pme_done = false;
@@ -1287,15 +1289,14 @@
default:
target_state = state;
}
+ } else if (!dev->pm_cap) {
+ target_state = PCI_D0;
} else if (device_may_wakeup(&dev->dev)) {
/*
* Find the deepest state from which the device can generate
* wake-up events, make it the target state and enable device
* to generate PME#.
*/
- if (!dev->pm_cap)
- return PCI_POWER_ERROR;
-
if (dev->pme_support) {
while (target_state
&& !(dev->pme_support & (1 << target_state)))
@@ -1532,7 +1533,7 @@
if (!pin)
return -1;
- while (dev->bus->parent) {
+ while (!pci_is_root_bus(dev->bus)) {
pin = pci_swizzle_interrupt_pin(dev, pin);
dev = dev->bus->self;
}
@@ -1552,7 +1553,7 @@
{
u8 pin = *pinp;
- while (dev->bus->parent) {
+ while (!pci_is_root_bus(dev->bus)) {
pin = pci_swizzle_interrupt_pin(dev, pin);
dev = dev->bus->self;
}
@@ -2058,111 +2059,177 @@
EXPORT_SYMBOL(pci_set_dma_seg_boundary);
#endif
-static int __pcie_flr(struct pci_dev *dev, int probe)
+static int pcie_flr(struct pci_dev *dev, int probe)
{
- u16 status;
+ int i;
+ int pos;
u32 cap;
- int exppos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ u16 status;
- if (!exppos)
+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (!pos)
return -ENOTTY;
- pci_read_config_dword(dev, exppos + PCI_EXP_DEVCAP, &cap);
+
+ pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP, &cap);
if (!(cap & PCI_EXP_DEVCAP_FLR))
return -ENOTTY;
if (probe)
return 0;
- pci_block_user_cfg_access(dev);
-
/* Wait for Transaction Pending bit clean */
- pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status);
- if (!(status & PCI_EXP_DEVSTA_TRPND))
- goto transaction_done;
+ for (i = 0; i < 4; i++) {
+ if (i)
+ msleep((1 << (i - 1)) * 100);
- msleep(100);
- pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status);
- if (!(status & PCI_EXP_DEVSTA_TRPND))
- goto transaction_done;
+ pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &status);
+ if (!(status & PCI_EXP_DEVSTA_TRPND))
+ goto clear;
+ }
- dev_info(&dev->dev, "Busy after 100ms while trying to reset; "
- "sleeping for 1 second\n");
- ssleep(1);
- pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status);
- if (status & PCI_EXP_DEVSTA_TRPND)
- dev_info(&dev->dev, "Still busy after 1s; "
- "proceeding with reset anyway\n");
+ dev_err(&dev->dev, "transaction is not cleared; "
+ "proceeding with reset anyway\n");
-transaction_done:
- pci_write_config_word(dev, exppos + PCI_EXP_DEVCTL,
+clear:
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL,
PCI_EXP_DEVCTL_BCR_FLR);
- mdelay(100);
+ msleep(100);
- pci_unblock_user_cfg_access(dev);
return 0;
}
-static int __pci_af_flr(struct pci_dev *dev, int probe)
+static int pci_af_flr(struct pci_dev *dev, int probe)
{
- int cappos = pci_find_capability(dev, PCI_CAP_ID_AF);
- u8 status;
+ int i;
+ int pos;
u8 cap;
+ u8 status;
- if (!cappos)
+ pos = pci_find_capability(dev, PCI_CAP_ID_AF);
+ if (!pos)
return -ENOTTY;
- pci_read_config_byte(dev, cappos + PCI_AF_CAP, &cap);
+
+ pci_read_config_byte(dev, pos + PCI_AF_CAP, &cap);
if (!(cap & PCI_AF_CAP_TP) || !(cap & PCI_AF_CAP_FLR))
return -ENOTTY;
if (probe)
return 0;
- pci_block_user_cfg_access(dev);
-
/* Wait for Transaction Pending bit clean */
- pci_read_config_byte(dev, cappos + PCI_AF_STATUS, &status);
- if (!(status & PCI_AF_STATUS_TP))
- goto transaction_done;
+ for (i = 0; i < 4; i++) {
+ if (i)
+ msleep((1 << (i - 1)) * 100);
+ pci_read_config_byte(dev, pos + PCI_AF_STATUS, &status);
+ if (!(status & PCI_AF_STATUS_TP))
+ goto clear;
+ }
+
+ dev_err(&dev->dev, "transaction is not cleared; "
+ "proceeding with reset anyway\n");
+
+clear:
+ pci_write_config_byte(dev, pos + PCI_AF_CTRL, PCI_AF_CTRL_FLR);
msleep(100);
- pci_read_config_byte(dev, cappos + PCI_AF_STATUS, &status);
- if (!(status & PCI_AF_STATUS_TP))
- goto transaction_done;
- dev_info(&dev->dev, "Busy after 100ms while trying to"
- " reset; sleeping for 1 second\n");
- ssleep(1);
- pci_read_config_byte(dev, cappos + PCI_AF_STATUS, &status);
- if (status & PCI_AF_STATUS_TP)
- dev_info(&dev->dev, "Still busy after 1s; "
- "proceeding with reset anyway\n");
-
-transaction_done:
- pci_write_config_byte(dev, cappos + PCI_AF_CTRL, PCI_AF_CTRL_FLR);
- mdelay(100);
-
- pci_unblock_user_cfg_access(dev);
return 0;
}
-static int __pci_reset_function(struct pci_dev *pdev, int probe)
+static int pci_pm_reset(struct pci_dev *dev, int probe)
{
- int res;
+ u16 csr;
- res = __pcie_flr(pdev, probe);
- if (res != -ENOTTY)
- return res;
+ if (!dev->pm_cap)
+ return -ENOTTY;
- res = __pci_af_flr(pdev, probe);
- if (res != -ENOTTY)
- return res;
+ pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &csr);
+ if (csr & PCI_PM_CTRL_NO_SOFT_RESET)
+ return -ENOTTY;
- return res;
+ if (probe)
+ return 0;
+
+ if (dev->current_state != PCI_D0)
+ return -EINVAL;
+
+ csr &= ~PCI_PM_CTRL_STATE_MASK;
+ csr |= PCI_D3hot;
+ pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
+ msleep(pci_pm_d3_delay);
+
+ csr &= ~PCI_PM_CTRL_STATE_MASK;
+ csr |= PCI_D0;
+ pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
+ msleep(pci_pm_d3_delay);
+
+ return 0;
+}
+
+static int pci_parent_bus_reset(struct pci_dev *dev, int probe)
+{
+ u16 ctrl;
+ struct pci_dev *pdev;
+
+ if (dev->subordinate)
+ return -ENOTTY;
+
+ list_for_each_entry(pdev, &dev->bus->devices, bus_list)
+ if (pdev != dev)
+ return -ENOTTY;
+
+ if (probe)
+ return 0;
+
+ pci_read_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, &ctrl);
+ ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
+ pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl);
+ msleep(100);
+
+ ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
+ pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl);
+ msleep(100);
+
+ return 0;
+}
+
+static int pci_dev_reset(struct pci_dev *dev, int probe)
+{
+ int rc;
+
+ might_sleep();
+
+ if (!probe) {
+ pci_block_user_cfg_access(dev);
+ /* block PM suspend, driver probe, etc. */
+ down(&dev->dev.sem);
+ }
+
+ rc = pcie_flr(dev, probe);
+ if (rc != -ENOTTY)
+ goto done;
+
+ rc = pci_af_flr(dev, probe);
+ if (rc != -ENOTTY)
+ goto done;
+
+ rc = pci_pm_reset(dev, probe);
+ if (rc != -ENOTTY)
+ goto done;
+
+ rc = pci_parent_bus_reset(dev, probe);
+done:
+ if (!probe) {
+ up(&dev->dev.sem);
+ pci_unblock_user_cfg_access(dev);
+ }
+
+ return rc;
}
/**
- * pci_execute_reset_function() - Reset a PCI device function
- * @dev: Device function to reset
+ * __pci_reset_function - reset a PCI device function
+ * @dev: PCI device to reset
*
* Some devices allow an individual function to be reset without affecting
* other functions in the same device. The PCI device must be responsive
@@ -2174,18 +2241,18 @@
* device including MSI, bus mastering, BARs, decoding IO and memory spaces,
* etc.
*
- * Returns 0 if the device function was successfully reset or -ENOTTY if the
+ * Returns 0 if the device function was successfully reset or negative if the
* device doesn't support resetting a single function.
*/
-int pci_execute_reset_function(struct pci_dev *dev)
+int __pci_reset_function(struct pci_dev *dev)
{
- return __pci_reset_function(dev, 0);
+ return pci_dev_reset(dev, 0);
}
-EXPORT_SYMBOL_GPL(pci_execute_reset_function);
+EXPORT_SYMBOL_GPL(__pci_reset_function);
/**
- * pci_reset_function() - quiesce and reset a PCI device function
- * @dev: Device function to reset
+ * pci_reset_function - quiesce and reset a PCI device function
+ * @dev: PCI device to reset
*
* Some devices allow an individual function to be reset without affecting
* other functions in the same device. The PCI device must be responsive
@@ -2193,32 +2260,33 @@
*
* This function does not just reset the PCI portion of a device, but
* clears all the state associated with the device. This function differs
- * from pci_execute_reset_function in that it saves and restores device state
+ * from __pci_reset_function in that it saves and restores device state
* over the reset.
*
- * Returns 0 if the device function was successfully reset or -ENOTTY if the
+ * Returns 0 if the device function was successfully reset or negative if the
* device doesn't support resetting a single function.
*/
int pci_reset_function(struct pci_dev *dev)
{
- int r = __pci_reset_function(dev, 1);
+ int rc;
- if (r < 0)
- return r;
+ rc = pci_dev_reset(dev, 1);
+ if (rc)
+ return rc;
- if (!dev->msi_enabled && !dev->msix_enabled && dev->irq != 0)
- disable_irq(dev->irq);
pci_save_state(dev);
+ /*
+ * both INTx and MSI are disabled after the Interrupt Disable bit
+ * is set and the Bus Master bit is cleared.
+ */
pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
- r = pci_execute_reset_function(dev);
+ rc = pci_dev_reset(dev, 0);
pci_restore_state(dev);
- if (!dev->msi_enabled && !dev->msix_enabled && dev->irq != 0)
- enable_irq(dev->irq);
- return r;
+ return rc;
}
EXPORT_SYMBOL_GPL(pci_reset_function);
@@ -2591,6 +2659,8 @@
} else if (!strncmp(str, "resource_alignment=", 19)) {
pci_set_resource_alignment_param(str + 19,
strlen(str + 19));
+ } else if (!strncmp(str, "ecrc=", 5)) {
+ pcie_ecrc_get_policy(str + 5);
} else {
printk(KERN_ERR "PCI: Unknown option `%s'\n",
str);
diff --git a/drivers/pci/pcie/aer/Kconfig b/drivers/pci/pcie/aer/Kconfig
index c3bde58..50e94e0 100644
--- a/drivers/pci/pcie/aer/Kconfig
+++ b/drivers/pci/pcie/aer/Kconfig
@@ -10,3 +10,18 @@
This enables PCI Express Root Port Advanced Error Reporting
(AER) driver support. Error reporting messages sent to Root
Port will be handled by PCI Express AER driver.
+
+
+#
+# PCI Express ECRC
+#
+config PCIE_ECRC
+ bool "PCI Express ECRC settings control"
+ depends on PCIEAER
+ help
+ Used to override firmware/bios settings for PCI Express ECRC
+ (transaction layer end-to-end CRC checking).
+
+ When in doubt, say N.
+
+source "drivers/pci/pcie/aer/Kconfig.debug"
diff --git a/drivers/pci/pcie/aer/Kconfig.debug b/drivers/pci/pcie/aer/Kconfig.debug
new file mode 100644
index 0000000..b8c925c
--- /dev/null
+++ b/drivers/pci/pcie/aer/Kconfig.debug
@@ -0,0 +1,18 @@
+#
+# PCI Express Root Port Device AER Debug Configuration
+#
+
+config PCIEAER_INJECT
+ tristate "PCIE AER error injector support"
+ depends on PCIEAER
+ default n
+ help
+ This enables PCI Express Root Port Advanced Error Reporting
+ (AER) software error injector.
+
+ Debuging PCIE AER code is quite difficult because it is hard
+ to trigger various real hardware errors. Software based
+ error injection can fake almost all kinds of errors with the
+ help of a user space helper tool aer-inject, which can be
+ gotten from:
+ http://www.kernel.org/pub/linux/utils/pci/aer-inject/
diff --git a/drivers/pci/pcie/aer/Makefile b/drivers/pci/pcie/aer/Makefile
index 8da3bd8..2cba675 100644
--- a/drivers/pci/pcie/aer/Makefile
+++ b/drivers/pci/pcie/aer/Makefile
@@ -4,6 +4,9 @@
obj-$(CONFIG_PCIEAER) += aerdriver.o
+obj-$(CONFIG_PCIE_ECRC) += ecrc.o
+
aerdriver-objs := aerdrv_errprint.o aerdrv_core.o aerdrv.o
aerdriver-$(CONFIG_ACPI) += aerdrv_acpi.o
+obj-$(CONFIG_PCIEAER_INJECT) += aer_inject.o
diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c
new file mode 100644
index 0000000..d92ae21
--- /dev/null
+++ b/drivers/pci/pcie/aer/aer_inject.c
@@ -0,0 +1,473 @@
+/*
+ * PCIE AER software error injection support.
+ *
+ * Debuging PCIE AER code is quite difficult because it is hard to
+ * trigger various real hardware errors. Software based error
+ * injection can fake almost all kinds of errors with the help of a
+ * user space helper tool aer-inject, which can be gotten from:
+ * http://www.kernel.org/pub/linux/utils/pci/aer-inject/
+ *
+ * Copyright 2009 Intel Corporation.
+ * Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/miscdevice.h>
+#include <linux/pci.h>
+#include <linux/fs.h>
+#include <asm/uaccess.h>
+#include "aerdrv.h"
+
+struct aer_error_inj
+{
+ u8 bus;
+ u8 dev;
+ u8 fn;
+ u32 uncor_status;
+ u32 cor_status;
+ u32 header_log0;
+ u32 header_log1;
+ u32 header_log2;
+ u32 header_log3;
+};
+
+struct aer_error
+{
+ struct list_head list;
+ unsigned int bus;
+ unsigned int devfn;
+ int pos_cap_err;
+
+ u32 uncor_status;
+ u32 cor_status;
+ u32 header_log0;
+ u32 header_log1;
+ u32 header_log2;
+ u32 header_log3;
+ u32 root_status;
+ u32 source_id;
+};
+
+struct pci_bus_ops
+{
+ struct list_head list;
+ struct pci_bus *bus;
+ struct pci_ops *ops;
+};
+
+static LIST_HEAD(einjected);
+
+static LIST_HEAD(pci_bus_ops_list);
+
+/* Protect einjected and pci_bus_ops_list */
+static DEFINE_SPINLOCK(inject_lock);
+
+static void aer_error_init(struct aer_error *err, unsigned int bus,
+ unsigned int devfn, int pos_cap_err)
+{
+ INIT_LIST_HEAD(&err->list);
+ err->bus = bus;
+ err->devfn = devfn;
+ err->pos_cap_err = pos_cap_err;
+}
+
+/* inject_lock must be held before calling */
+static struct aer_error *__find_aer_error(unsigned int bus, unsigned int devfn)
+{
+ struct aer_error *err;
+
+ list_for_each_entry(err, &einjected, list) {
+ if (bus == err->bus && devfn == err->devfn)
+ return err;
+ }
+ return NULL;
+}
+
+/* inject_lock must be held before calling */
+static struct aer_error *__find_aer_error_by_dev(struct pci_dev *dev)
+{
+ return __find_aer_error(dev->bus->number, dev->devfn);
+}
+
+/* inject_lock must be held before calling */
+static struct pci_ops *__find_pci_bus_ops(struct pci_bus *bus)
+{
+ struct pci_bus_ops *bus_ops;
+
+ list_for_each_entry(bus_ops, &pci_bus_ops_list, list) {
+ if (bus_ops->bus == bus)
+ return bus_ops->ops;
+ }
+ return NULL;
+}
+
+static struct pci_bus_ops *pci_bus_ops_pop(void)
+{
+ unsigned long flags;
+ struct pci_bus_ops *bus_ops = NULL;
+
+ spin_lock_irqsave(&inject_lock, flags);
+ if (list_empty(&pci_bus_ops_list))
+ bus_ops = NULL;
+ else {
+ struct list_head *lh = pci_bus_ops_list.next;
+ list_del(lh);
+ bus_ops = list_entry(lh, struct pci_bus_ops, list);
+ }
+ spin_unlock_irqrestore(&inject_lock, flags);
+ return bus_ops;
+}
+
+static u32 *find_pci_config_dword(struct aer_error *err, int where,
+ int *prw1cs)
+{
+ int rw1cs = 0;
+ u32 *target = NULL;
+
+ if (err->pos_cap_err == -1)
+ return NULL;
+
+ switch (where - err->pos_cap_err) {
+ case PCI_ERR_UNCOR_STATUS:
+ target = &err->uncor_status;
+ rw1cs = 1;
+ break;
+ case PCI_ERR_COR_STATUS:
+ target = &err->cor_status;
+ rw1cs = 1;
+ break;
+ case PCI_ERR_HEADER_LOG:
+ target = &err->header_log0;
+ break;
+ case PCI_ERR_HEADER_LOG+4:
+ target = &err->header_log1;
+ break;
+ case PCI_ERR_HEADER_LOG+8:
+ target = &err->header_log2;
+ break;
+ case PCI_ERR_HEADER_LOG+12:
+ target = &err->header_log3;
+ break;
+ case PCI_ERR_ROOT_STATUS:
+ target = &err->root_status;
+ rw1cs = 1;
+ break;
+ case PCI_ERR_ROOT_COR_SRC:
+ target = &err->source_id;
+ break;
+ }
+ if (prw1cs)
+ *prw1cs = rw1cs;
+ return target;
+}
+
+static int pci_read_aer(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 *val)
+{
+ u32 *sim;
+ struct aer_error *err;
+ unsigned long flags;
+ struct pci_ops *ops;
+
+ spin_lock_irqsave(&inject_lock, flags);
+ if (size != sizeof(u32))
+ goto out;
+ err = __find_aer_error(bus->number, devfn);
+ if (!err)
+ goto out;
+
+ sim = find_pci_config_dword(err, where, NULL);
+ if (sim) {
+ *val = *sim;
+ spin_unlock_irqrestore(&inject_lock, flags);
+ return 0;
+ }
+out:
+ ops = __find_pci_bus_ops(bus);
+ spin_unlock_irqrestore(&inject_lock, flags);
+ return ops->read(bus, devfn, where, size, val);
+}
+
+int pci_write_aer(struct pci_bus *bus, unsigned int devfn, int where, int size,
+ u32 val)
+{
+ u32 *sim;
+ struct aer_error *err;
+ unsigned long flags;
+ int rw1cs;
+ struct pci_ops *ops;
+
+ spin_lock_irqsave(&inject_lock, flags);
+ if (size != sizeof(u32))
+ goto out;
+ err = __find_aer_error(bus->number, devfn);
+ if (!err)
+ goto out;
+
+ sim = find_pci_config_dword(err, where, &rw1cs);
+ if (sim) {
+ if (rw1cs)
+ *sim ^= val;
+ else
+ *sim = val;
+ spin_unlock_irqrestore(&inject_lock, flags);
+ return 0;
+ }
+out:
+ ops = __find_pci_bus_ops(bus);
+ spin_unlock_irqrestore(&inject_lock, flags);
+ return ops->write(bus, devfn, where, size, val);
+}
+
+static struct pci_ops pci_ops_aer = {
+ .read = pci_read_aer,
+ .write = pci_write_aer,
+};
+
+static void pci_bus_ops_init(struct pci_bus_ops *bus_ops,
+ struct pci_bus *bus,
+ struct pci_ops *ops)
+{
+ INIT_LIST_HEAD(&bus_ops->list);
+ bus_ops->bus = bus;
+ bus_ops->ops = ops;
+}
+
+static int pci_bus_set_aer_ops(struct pci_bus *bus)
+{
+ struct pci_ops *ops;
+ struct pci_bus_ops *bus_ops;
+ unsigned long flags;
+
+ bus_ops = kmalloc(sizeof(*bus_ops), GFP_KERNEL);
+ if (!bus_ops)
+ return -ENOMEM;
+ ops = pci_bus_set_ops(bus, &pci_ops_aer);
+ spin_lock_irqsave(&inject_lock, flags);
+ if (ops == &pci_ops_aer)
+ goto out;
+ pci_bus_ops_init(bus_ops, bus, ops);
+ list_add(&bus_ops->list, &pci_bus_ops_list);
+ bus_ops = NULL;
+out:
+ spin_unlock_irqrestore(&inject_lock, flags);
+ if (bus_ops)
+ kfree(bus_ops);
+ return 0;
+}
+
+static struct pci_dev *pcie_find_root_port(struct pci_dev *dev)
+{
+ while (1) {
+ if (!dev->is_pcie)
+ break;
+ if (dev->pcie_type == PCI_EXP_TYPE_ROOT_PORT)
+ return dev;
+ if (!dev->bus->self)
+ break;
+ dev = dev->bus->self;
+ }
+ return NULL;
+}
+
+static int find_aer_device_iter(struct device *device, void *data)
+{
+ struct pcie_device **result = data;
+ struct pcie_device *pcie_dev;
+
+ if (device->bus == &pcie_port_bus_type) {
+ pcie_dev = to_pcie_device(device);
+ if (pcie_dev->service & PCIE_PORT_SERVICE_AER) {
+ *result = pcie_dev;
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int find_aer_device(struct pci_dev *dev, struct pcie_device **result)
+{
+ return device_for_each_child(&dev->dev, result, find_aer_device_iter);
+}
+
+static int aer_inject(struct aer_error_inj *einj)
+{
+ struct aer_error *err, *rperr;
+ struct aer_error *err_alloc = NULL, *rperr_alloc = NULL;
+ struct pci_dev *dev, *rpdev;
+ struct pcie_device *edev;
+ unsigned long flags;
+ unsigned int devfn = PCI_DEVFN(einj->dev, einj->fn);
+ int pos_cap_err, rp_pos_cap_err;
+ u32 sever;
+ int ret = 0;
+
+ dev = pci_get_bus_and_slot(einj->bus, devfn);
+ if (!dev)
+ return -EINVAL;
+ rpdev = pcie_find_root_port(dev);
+ if (!rpdev) {
+ ret = -EINVAL;
+ goto out_put;
+ }
+
+ pos_cap_err = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+ if (!pos_cap_err) {
+ ret = -EIO;
+ goto out_put;
+ }
+ pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_SEVER, &sever);
+
+ rp_pos_cap_err = pci_find_ext_capability(rpdev, PCI_EXT_CAP_ID_ERR);
+ if (!rp_pos_cap_err) {
+ ret = -EIO;
+ goto out_put;
+ }
+
+ err_alloc = kzalloc(sizeof(struct aer_error), GFP_KERNEL);
+ if (!err_alloc) {
+ ret = -ENOMEM;
+ goto out_put;
+ }
+ rperr_alloc = kzalloc(sizeof(struct aer_error), GFP_KERNEL);
+ if (!rperr_alloc) {
+ ret = -ENOMEM;
+ goto out_put;
+ }
+
+ spin_lock_irqsave(&inject_lock, flags);
+
+ err = __find_aer_error_by_dev(dev);
+ if (!err) {
+ err = err_alloc;
+ err_alloc = NULL;
+ aer_error_init(err, einj->bus, devfn, pos_cap_err);
+ list_add(&err->list, &einjected);
+ }
+ err->uncor_status |= einj->uncor_status;
+ err->cor_status |= einj->cor_status;
+ err->header_log0 = einj->header_log0;
+ err->header_log1 = einj->header_log1;
+ err->header_log2 = einj->header_log2;
+ err->header_log3 = einj->header_log3;
+
+ rperr = __find_aer_error_by_dev(rpdev);
+ if (!rperr) {
+ rperr = rperr_alloc;
+ rperr_alloc = NULL;
+ aer_error_init(rperr, rpdev->bus->number, rpdev->devfn,
+ rp_pos_cap_err);
+ list_add(&rperr->list, &einjected);
+ }
+ if (einj->cor_status) {
+ if (rperr->root_status & PCI_ERR_ROOT_COR_RCV)
+ rperr->root_status |= PCI_ERR_ROOT_MULTI_COR_RCV;
+ else
+ rperr->root_status |= PCI_ERR_ROOT_COR_RCV;
+ rperr->source_id &= 0xffff0000;
+ rperr->source_id |= (einj->bus << 8) | devfn;
+ }
+ if (einj->uncor_status) {
+ if (rperr->root_status & PCI_ERR_ROOT_UNCOR_RCV)
+ rperr->root_status |= PCI_ERR_ROOT_MULTI_UNCOR_RCV;
+ if (sever & einj->uncor_status) {
+ rperr->root_status |= PCI_ERR_ROOT_FATAL_RCV;
+ if (!(rperr->root_status & PCI_ERR_ROOT_UNCOR_RCV))
+ rperr->root_status |= PCI_ERR_ROOT_FIRST_FATAL;
+ } else
+ rperr->root_status |= PCI_ERR_ROOT_NONFATAL_RCV;
+ rperr->root_status |= PCI_ERR_ROOT_UNCOR_RCV;
+ rperr->source_id &= 0x0000ffff;
+ rperr->source_id |= ((einj->bus << 8) | devfn) << 16;
+ }
+ spin_unlock_irqrestore(&inject_lock, flags);
+
+ ret = pci_bus_set_aer_ops(dev->bus);
+ if (ret)
+ goto out_put;
+ ret = pci_bus_set_aer_ops(rpdev->bus);
+ if (ret)
+ goto out_put;
+
+ if (find_aer_device(rpdev, &edev))
+ aer_irq(-1, edev);
+ else
+ ret = -EINVAL;
+out_put:
+ if (err_alloc)
+ kfree(err_alloc);
+ if (rperr_alloc)
+ kfree(rperr_alloc);
+ pci_dev_put(dev);
+ return ret;
+}
+
+static ssize_t aer_inject_write(struct file *filp, const char __user *ubuf,
+ size_t usize, loff_t *off)
+{
+ struct aer_error_inj einj;
+ int ret;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if (usize != sizeof(struct aer_error_inj))
+ return -EINVAL;
+
+ if (copy_from_user(&einj, ubuf, usize))
+ return -EFAULT;
+
+ ret = aer_inject(&einj);
+ return ret ? ret : usize;
+}
+
+static const struct file_operations aer_inject_fops = {
+ .write = aer_inject_write,
+ .owner = THIS_MODULE,
+};
+
+static struct miscdevice aer_inject_device = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "aer_inject",
+ .fops = &aer_inject_fops,
+};
+
+static int __init aer_inject_init(void)
+{
+ return misc_register(&aer_inject_device);
+}
+
+static void __exit aer_inject_exit(void)
+{
+ struct aer_error *err, *err_next;
+ unsigned long flags;
+ struct pci_bus_ops *bus_ops;
+
+ misc_deregister(&aer_inject_device);
+
+ while ((bus_ops = pci_bus_ops_pop())) {
+ pci_bus_set_ops(bus_ops->bus, bus_ops->ops);
+ kfree(bus_ops);
+ }
+
+ spin_lock_irqsave(&inject_lock, flags);
+ list_for_each_entry_safe(err, err_next,
+ &pci_bus_ops_list, list) {
+ list_del(&err->list);
+ kfree(err);
+ }
+ spin_unlock_irqrestore(&inject_lock, flags);
+}
+
+module_init(aer_inject_init);
+module_exit(aer_inject_exit);
+
+MODULE_DESCRIPTION("PCIE AER software error injector");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c
index 32ade5a..4770f13 100644
--- a/drivers/pci/pcie/aer/aerdrv.c
+++ b/drivers/pci/pcie/aer/aerdrv.c
@@ -77,7 +77,7 @@
*
* Invoked when Root Port detects AER messages.
**/
-static irqreturn_t aer_irq(int irq, void *context)
+irqreturn_t aer_irq(int irq, void *context)
{
unsigned int status, id;
struct pcie_device *pdev = (struct pcie_device *)context;
@@ -126,6 +126,7 @@
return IRQ_HANDLED;
}
+EXPORT_SYMBOL_GPL(aer_irq);
/**
* aer_alloc_rpc - allocate Root Port data structure
diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h
index aa14482..bbd7428 100644
--- a/drivers/pci/pcie/aer/aerdrv.h
+++ b/drivers/pci/pcie/aer/aerdrv.h
@@ -11,6 +11,7 @@
#include <linux/workqueue.h>
#include <linux/pcieport_if.h>
#include <linux/aer.h>
+#include <linux/interrupt.h>
#define AER_NONFATAL 0
#define AER_FATAL 1
@@ -56,7 +57,11 @@
unsigned int dw3;
};
+#define AER_MAX_MULTI_ERR_DEVICES 5 /* Not likely to have more */
struct aer_err_info {
+ struct pci_dev *dev[AER_MAX_MULTI_ERR_DEVICES];
+ int error_dev_num;
+ u16 id;
int severity; /* 0:NONFATAL | 1:FATAL | 2:COR */
int flags;
unsigned int status; /* COR/UNCOR Error Status */
@@ -120,6 +125,7 @@
extern int aer_init(struct pcie_device *dev);
extern void aer_isr(struct work_struct *work);
extern void aer_print_error(struct pci_dev *dev, struct aer_err_info *info);
+extern irqreturn_t aer_irq(int irq, void *context);
#ifdef CONFIG_ACPI
extern int aer_osc_setup(struct pcie_device *pciedev);
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index 307452f..3d88727 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -26,7 +26,9 @@
#include "aerdrv.h"
static int forceload;
+static int nosourceid;
module_param(forceload, bool, 0);
+module_param(nosourceid, bool, 0);
int pci_enable_pcie_error_reporting(struct pci_dev *dev)
{
@@ -109,19 +111,23 @@
#endif /* 0 */
-static void set_device_error_reporting(struct pci_dev *dev, void *data)
+static int set_device_error_reporting(struct pci_dev *dev, void *data)
{
bool enable = *((bool *)data);
- if (dev->pcie_type != PCIE_RC_PORT &&
- dev->pcie_type != PCIE_SW_UPSTREAM_PORT &&
- dev->pcie_type != PCIE_SW_DOWNSTREAM_PORT)
- return;
+ if (dev->pcie_type == PCIE_RC_PORT ||
+ dev->pcie_type == PCIE_SW_UPSTREAM_PORT ||
+ dev->pcie_type == PCIE_SW_DOWNSTREAM_PORT) {
+ if (enable)
+ pci_enable_pcie_error_reporting(dev);
+ else
+ pci_disable_pcie_error_reporting(dev);
+ }
if (enable)
- pci_enable_pcie_error_reporting(dev);
- else
- pci_disable_pcie_error_reporting(dev);
+ pcie_set_ecrc_checking(dev);
+
+ return 0;
}
/**
@@ -139,73 +145,148 @@
pci_walk_bus(dev->subordinate, set_device_error_reporting, &enable);
}
-static int find_device_iter(struct device *device, void *data)
+static inline int compare_device_id(struct pci_dev *dev,
+ struct aer_err_info *e_info)
{
- struct pci_dev *dev;
- u16 id = *(unsigned long *)data;
- u8 secondary, subordinate, d_bus = id >> 8;
-
- if (device->bus == &pci_bus_type) {
- dev = to_pci_dev(device);
- if (id == ((dev->bus->number << 8) | dev->devfn)) {
- /*
- * Device ID match
- */
- *(unsigned long*)data = (unsigned long)device;
- return 1;
- }
-
+ if (e_info->id == ((dev->bus->number << 8) | dev->devfn)) {
/*
- * If device is P2P, check if it is an upstream?
+ * Device ID match
*/
- if (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE) {
- pci_read_config_byte(dev, PCI_SECONDARY_BUS,
- &secondary);
- pci_read_config_byte(dev, PCI_SUBORDINATE_BUS,
- &subordinate);
- if (d_bus >= secondary && d_bus <= subordinate) {
- *(unsigned long*)data = (unsigned long)device;
- return 1;
- }
- }
+ return 1;
}
return 0;
}
+static int add_error_device(struct aer_err_info *e_info, struct pci_dev *dev)
+{
+ if (e_info->error_dev_num < AER_MAX_MULTI_ERR_DEVICES) {
+ e_info->dev[e_info->error_dev_num] = dev;
+ e_info->error_dev_num++;
+ return 1;
+ } else
+ return 0;
+}
+
+
+#define PCI_BUS(x) (((x) >> 8) & 0xff)
+
+static int find_device_iter(struct pci_dev *dev, void *data)
+{
+ int pos;
+ u32 status;
+ u32 mask;
+ u16 reg16;
+ int result;
+ struct aer_err_info *e_info = (struct aer_err_info *)data;
+
+ /*
+ * When bus id is equal to 0, it might be a bad id
+ * reported by root port.
+ */
+ if (!nosourceid && (PCI_BUS(e_info->id) != 0)) {
+ result = compare_device_id(dev, e_info);
+ if (result)
+ add_error_device(e_info, dev);
+
+ /*
+ * If there is no multiple error, we stop
+ * or continue based on the id comparing.
+ */
+ if (!(e_info->flags & AER_MULTI_ERROR_VALID_FLAG))
+ return result;
+
+ /*
+ * If there are multiple errors and id does match,
+ * We need continue to search other devices under
+ * the root port. Return 0 means that.
+ */
+ if (result)
+ return 0;
+ }
+
+ /*
+ * When either
+ * 1) nosourceid==y;
+ * 2) bus id is equal to 0. Some ports might lose the bus
+ * id of error source id;
+ * 3) There are multiple errors and prior id comparing fails;
+ * We check AER status registers to find the initial reporter.
+ */
+ if (atomic_read(&dev->enable_cnt) == 0)
+ return 0;
+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (!pos)
+ return 0;
+ /* Check if AER is enabled */
+ pci_read_config_word(dev, pos+PCI_EXP_DEVCTL, ®16);
+ if (!(reg16 & (
+ PCI_EXP_DEVCTL_CERE |
+ PCI_EXP_DEVCTL_NFERE |
+ PCI_EXP_DEVCTL_FERE |
+ PCI_EXP_DEVCTL_URRE)))
+ return 0;
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+ if (!pos)
+ return 0;
+
+ status = 0;
+ mask = 0;
+ if (e_info->severity == AER_CORRECTABLE) {
+ pci_read_config_dword(dev,
+ pos + PCI_ERR_COR_STATUS,
+ &status);
+ pci_read_config_dword(dev,
+ pos + PCI_ERR_COR_MASK,
+ &mask);
+ if (status & ERR_CORRECTABLE_ERROR_MASK & ~mask) {
+ add_error_device(e_info, dev);
+ goto added;
+ }
+ } else {
+ pci_read_config_dword(dev,
+ pos + PCI_ERR_UNCOR_STATUS,
+ &status);
+ pci_read_config_dword(dev,
+ pos + PCI_ERR_UNCOR_MASK,
+ &mask);
+ if (status & ERR_UNCORRECTABLE_ERROR_MASK & ~mask) {
+ add_error_device(e_info, dev);
+ goto added;
+ }
+ }
+
+ return 0;
+
+added:
+ if (e_info->flags & AER_MULTI_ERROR_VALID_FLAG)
+ return 0;
+ else
+ return 1;
+}
+
/**
* find_source_device - search through device hierarchy for source device
* @parent: pointer to Root Port pci_dev data structure
- * @id: device ID of agent who sends an error message to this Root Port
+ * @err_info: including detailed error information such like id
*
* Invoked when error is detected at the Root Port.
*/
-static struct device* find_source_device(struct pci_dev *parent, u16 id)
+static void find_source_device(struct pci_dev *parent,
+ struct aer_err_info *e_info)
{
struct pci_dev *dev = parent;
- struct device *device;
- unsigned long device_addr;
- int status;
+ int result;
/* Is Root Port an agent that sends error message? */
- if (id == ((dev->bus->number << 8) | dev->devfn))
- return &dev->dev;
+ result = find_device_iter(dev, e_info);
+ if (result)
+ return;
- do {
- device_addr = id;
- if ((status = device_for_each_child(&dev->dev,
- &device_addr, find_device_iter))) {
- device = (struct device*)device_addr;
- dev = to_pci_dev(device);
- if (id == ((dev->bus->number << 8) | dev->devfn))
- return device;
- }
- }while (status);
-
- return NULL;
+ pci_walk_bus(parent->subordinate, find_device_iter, e_info);
}
-static void report_error_detected(struct pci_dev *dev, void *data)
+static int report_error_detected(struct pci_dev *dev, void *data)
{
pci_ers_result_t vote;
struct pci_error_handlers *err_handler;
@@ -230,16 +311,16 @@
dev->driver ?
"no AER-aware driver" : "no driver");
}
- return;
+ return 0;
}
err_handler = dev->driver->err_handler;
vote = err_handler->error_detected(dev, result_data->state);
result_data->result = merge_result(result_data->result, vote);
- return;
+ return 0;
}
-static void report_mmio_enabled(struct pci_dev *dev, void *data)
+static int report_mmio_enabled(struct pci_dev *dev, void *data)
{
pci_ers_result_t vote;
struct pci_error_handlers *err_handler;
@@ -249,15 +330,15 @@
if (!dev->driver ||
!dev->driver->err_handler ||
!dev->driver->err_handler->mmio_enabled)
- return;
+ return 0;
err_handler = dev->driver->err_handler;
vote = err_handler->mmio_enabled(dev);
result_data->result = merge_result(result_data->result, vote);
- return;
+ return 0;
}
-static void report_slot_reset(struct pci_dev *dev, void *data)
+static int report_slot_reset(struct pci_dev *dev, void *data)
{
pci_ers_result_t vote;
struct pci_error_handlers *err_handler;
@@ -267,15 +348,15 @@
if (!dev->driver ||
!dev->driver->err_handler ||
!dev->driver->err_handler->slot_reset)
- return;
+ return 0;
err_handler = dev->driver->err_handler;
vote = err_handler->slot_reset(dev);
result_data->result = merge_result(result_data->result, vote);
- return;
+ return 0;
}
-static void report_resume(struct pci_dev *dev, void *data)
+static int report_resume(struct pci_dev *dev, void *data)
{
struct pci_error_handlers *err_handler;
@@ -284,11 +365,11 @@
if (!dev->driver ||
!dev->driver->err_handler ||
!dev->driver->err_handler->resume)
- return;
+ return 0;
err_handler = dev->driver->err_handler;
err_handler->resume(dev);
- return;
+ return 0;
}
/**
@@ -305,7 +386,7 @@
static pci_ers_result_t broadcast_error_message(struct pci_dev *dev,
enum pci_channel_state state,
char *error_mesg,
- void (*cb)(struct pci_dev *, void *))
+ int (*cb)(struct pci_dev *, void *))
{
struct aer_broadcast_data result_data;
@@ -497,12 +578,12 @@
*/
static void handle_error_source(struct pcie_device * aerdev,
struct pci_dev *dev,
- struct aer_err_info info)
+ struct aer_err_info *info)
{
pci_ers_result_t status = 0;
int pos;
- if (info.severity == AER_CORRECTABLE) {
+ if (info->severity == AER_CORRECTABLE) {
/*
* Correctable error does not need software intevention.
* No need to go through error recovery process.
@@ -510,9 +591,9 @@
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
if (pos)
pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS,
- info.status);
+ info->status);
} else {
- status = do_recovery(aerdev, dev, info.severity);
+ status = do_recovery(aerdev, dev, info->severity);
if (status == PCI_ERS_RESULT_RECOVERED) {
dev_printk(KERN_DEBUG, &dev->dev, "AER driver "
"successfully recovered\n");
@@ -661,6 +742,28 @@
return AER_SUCCESS;
}
+static inline void aer_process_err_devices(struct pcie_device *p_device,
+ struct aer_err_info *e_info)
+{
+ int i;
+
+ if (!e_info->dev[0]) {
+ dev_printk(KERN_DEBUG, &p_device->port->dev,
+ "can't find device of ID%04x\n",
+ e_info->id);
+ }
+
+ for (i = 0; i < e_info->error_dev_num && e_info->dev[i]; i++) {
+ if (get_device_error_info(e_info->dev[i], e_info) ==
+ AER_SUCCESS) {
+ aer_print_error(e_info->dev[i], e_info);
+ handle_error_source(p_device,
+ e_info->dev[i],
+ e_info);
+ }
+ }
+}
+
/**
* aer_isr_one_error - consume an error detected by root port
* @p_device: pointer to error root port service device
@@ -669,10 +772,16 @@
static void aer_isr_one_error(struct pcie_device *p_device,
struct aer_err_source *e_src)
{
- struct device *s_device;
- struct aer_err_info e_info = {0, 0, 0,};
+ struct aer_err_info *e_info;
int i;
- u16 id;
+
+ /* struct aer_err_info might be big, so we allocate it with slab */
+ e_info = kmalloc(sizeof(struct aer_err_info), GFP_KERNEL);
+ if (e_info == NULL) {
+ dev_printk(KERN_DEBUG, &p_device->port->dev,
+ "Can't allocate mem when processing AER errors\n");
+ return;
+ }
/*
* There is a possibility that both correctable error and
@@ -684,31 +793,26 @@
if (!(e_src->status & i))
continue;
+ memset(e_info, 0, sizeof(struct aer_err_info));
+
/* Init comprehensive error information */
if (i & PCI_ERR_ROOT_COR_RCV) {
- id = ERR_COR_ID(e_src->id);
- e_info.severity = AER_CORRECTABLE;
+ e_info->id = ERR_COR_ID(e_src->id);
+ e_info->severity = AER_CORRECTABLE;
} else {
- id = ERR_UNCOR_ID(e_src->id);
- e_info.severity = ((e_src->status >> 6) & 1);
+ e_info->id = ERR_UNCOR_ID(e_src->id);
+ e_info->severity = ((e_src->status >> 6) & 1);
}
if (e_src->status &
(PCI_ERR_ROOT_MULTI_COR_RCV |
PCI_ERR_ROOT_MULTI_UNCOR_RCV))
- e_info.flags |= AER_MULTI_ERROR_VALID_FLAG;
- if (!(s_device = find_source_device(p_device->port, id))) {
- printk(KERN_DEBUG "%s->can't find device of ID%04x\n",
- __func__, id);
- continue;
- }
- if (get_device_error_info(to_pci_dev(s_device), &e_info) ==
- AER_SUCCESS) {
- aer_print_error(to_pci_dev(s_device), &e_info);
- handle_error_source(p_device,
- to_pci_dev(s_device),
- e_info);
- }
+ e_info->flags |= AER_MULTI_ERROR_VALID_FLAG;
+
+ find_source_device(p_device->port, e_info);
+ aer_process_err_devices(p_device, e_info);
}
+
+ kfree(e_info);
}
/**
diff --git a/drivers/pci/pcie/aer/ecrc.c b/drivers/pci/pcie/aer/ecrc.c
new file mode 100644
index 0000000..ece97df
--- /dev/null
+++ b/drivers/pci/pcie/aer/ecrc.c
@@ -0,0 +1,131 @@
+/*
+ * Enables/disables PCIe ECRC checking.
+ *
+ * (C) Copyright 2009 Hewlett-Packard Development Company, L.P.
+ * Andrew Patterson <andrew.patterson@hp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/pci_regs.h>
+#include <linux/errno.h>
+#include "../../pci.h"
+
+#define ECRC_POLICY_DEFAULT 0 /* ECRC set by BIOS */
+#define ECRC_POLICY_OFF 1 /* ECRC off for performance */
+#define ECRC_POLICY_ON 2 /* ECRC on for data integrity */
+
+static int ecrc_policy = ECRC_POLICY_DEFAULT;
+
+static const char *ecrc_policy_str[] = {
+ [ECRC_POLICY_DEFAULT] = "bios",
+ [ECRC_POLICY_OFF] = "off",
+ [ECRC_POLICY_ON] = "on"
+};
+
+/**
+ * enable_ercr_checking - enable PCIe ECRC checking for a device
+ * @dev: the PCI device
+ *
+ * Returns 0 on success, or negative on failure.
+ */
+static int enable_ecrc_checking(struct pci_dev *dev)
+{
+ int pos;
+ u32 reg32;
+
+ if (!dev->is_pcie)
+ return -ENODEV;
+
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+ if (!pos)
+ return -ENODEV;
+
+ pci_read_config_dword(dev, pos + PCI_ERR_CAP, ®32);
+ if (reg32 & PCI_ERR_CAP_ECRC_GENC)
+ reg32 |= PCI_ERR_CAP_ECRC_GENE;
+ if (reg32 & PCI_ERR_CAP_ECRC_CHKC)
+ reg32 |= PCI_ERR_CAP_ECRC_CHKE;
+ pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32);
+
+ return 0;
+}
+
+/**
+ * disable_ercr_checking - disables PCIe ECRC checking for a device
+ * @dev: the PCI device
+ *
+ * Returns 0 on success, or negative on failure.
+ */
+static int disable_ecrc_checking(struct pci_dev *dev)
+{
+ int pos;
+ u32 reg32;
+
+ if (!dev->is_pcie)
+ return -ENODEV;
+
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+ if (!pos)
+ return -ENODEV;
+
+ pci_read_config_dword(dev, pos + PCI_ERR_CAP, ®32);
+ reg32 &= ~(PCI_ERR_CAP_ECRC_GENE | PCI_ERR_CAP_ECRC_CHKE);
+ pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32);
+
+ return 0;
+}
+
+/**
+ * pcie_set_ecrc_checking - set/unset PCIe ECRC checking for a device based on global policy
+ * @dev: the PCI device
+ */
+void pcie_set_ecrc_checking(struct pci_dev *dev)
+{
+ switch (ecrc_policy) {
+ case ECRC_POLICY_DEFAULT:
+ return;
+ case ECRC_POLICY_OFF:
+ disable_ecrc_checking(dev);
+ break;
+ case ECRC_POLICY_ON:
+ enable_ecrc_checking(dev);;
+ break;
+ default:
+ return;
+ }
+}
+
+/**
+ * pcie_ecrc_get_policy - parse kernel command-line ecrc option
+ */
+void pcie_ecrc_get_policy(char *str)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ecrc_policy_str); i++)
+ if (!strncmp(str, ecrc_policy_str[i],
+ strlen(ecrc_policy_str[i])))
+ break;
+ if (i >= ARRAY_SIZE(ecrc_policy_str))
+ return;
+
+ ecrc_policy = i;
+}
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index b0367f1..3d27c97 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -26,40 +26,36 @@
#endif
#define MODULE_PARAM_PREFIX "pcie_aspm."
-struct endpoint_state {
- unsigned int l0s_acceptable_latency;
- unsigned int l1_acceptable_latency;
+struct aspm_latency {
+ u32 l0s; /* L0s latency (nsec) */
+ u32 l1; /* L1 latency (nsec) */
};
struct pcie_link_state {
- struct list_head sibiling;
- struct pci_dev *pdev;
- bool downstream_has_switch;
-
- struct pcie_link_state *parent;
- struct list_head children;
- struct list_head link;
+ struct pci_dev *pdev; /* Upstream component of the Link */
+ struct pcie_link_state *root; /* pointer to the root port link */
+ struct pcie_link_state *parent; /* pointer to the parent Link state */
+ struct list_head sibling; /* node in link_list */
+ struct list_head children; /* list of child link states */
+ struct list_head link; /* node in parent's children list */
/* ASPM state */
- unsigned int support_state;
- unsigned int enabled_state;
- unsigned int bios_aspm_state;
- /* upstream component */
- unsigned int l0s_upper_latency;
- unsigned int l1_upper_latency;
- /* downstream component */
- unsigned int l0s_down_latency;
- unsigned int l1_down_latency;
- /* Clock PM state*/
- unsigned int clk_pm_capable;
- unsigned int clk_pm_enabled;
- unsigned int bios_clk_state;
+ u32 aspm_support:2; /* Supported ASPM state */
+ u32 aspm_enabled:2; /* Enabled ASPM state */
+ u32 aspm_default:2; /* Default ASPM state by BIOS */
+ /* Clock PM state */
+ u32 clkpm_capable:1; /* Clock PM capable? */
+ u32 clkpm_enabled:1; /* Current Clock PM state */
+ u32 clkpm_default:1; /* Default Clock PM state by BIOS */
+
+ /* Latencies */
+ struct aspm_latency latency; /* Exit latency */
/*
- * A pcie downstream port only has one slot under it, so at most there
- * are 8 functions
+ * Endpoint acceptable latencies. A pcie downstream port only
+ * has one slot under it, so at most there are 8 functions.
*/
- struct endpoint_state endpoints[8];
+ struct aspm_latency acceptable[8];
};
static int aspm_disabled, aspm_force;
@@ -78,27 +74,23 @@
#define LINK_RETRAIN_TIMEOUT HZ
-static int policy_to_aspm_state(struct pci_dev *pdev)
+static int policy_to_aspm_state(struct pcie_link_state *link)
{
- struct pcie_link_state *link_state = pdev->link_state;
-
switch (aspm_policy) {
case POLICY_PERFORMANCE:
/* Disable ASPM and Clock PM */
return 0;
case POLICY_POWERSAVE:
/* Enable ASPM L0s/L1 */
- return PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1;
+ return PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1;
case POLICY_DEFAULT:
- return link_state->bios_aspm_state;
+ return link->aspm_default;
}
return 0;
}
-static int policy_to_clkpm_state(struct pci_dev *pdev)
+static int policy_to_clkpm_state(struct pcie_link_state *link)
{
- struct pcie_link_state *link_state = pdev->link_state;
-
switch (aspm_policy) {
case POLICY_PERFORMANCE:
/* Disable ASPM and Clock PM */
@@ -107,73 +99,78 @@
/* Disable Clock PM */
return 1;
case POLICY_DEFAULT:
- return link_state->bios_clk_state;
+ return link->clkpm_default;
}
return 0;
}
-static void pcie_set_clock_pm(struct pci_dev *pdev, int enable)
+static void pcie_set_clkpm_nocheck(struct pcie_link_state *link, int enable)
{
- struct pci_dev *child_dev;
int pos;
u16 reg16;
- struct pcie_link_state *link_state = pdev->link_state;
+ struct pci_dev *child;
+ struct pci_bus *linkbus = link->pdev->subordinate;
- list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
- pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
+ list_for_each_entry(child, &linkbus->devices, bus_list) {
+ pos = pci_find_capability(child, PCI_CAP_ID_EXP);
if (!pos)
return;
- pci_read_config_word(child_dev, pos + PCI_EXP_LNKCTL, ®16);
+ pci_read_config_word(child, pos + PCI_EXP_LNKCTL, ®16);
if (enable)
reg16 |= PCI_EXP_LNKCTL_CLKREQ_EN;
else
reg16 &= ~PCI_EXP_LNKCTL_CLKREQ_EN;
- pci_write_config_word(child_dev, pos + PCI_EXP_LNKCTL, reg16);
+ pci_write_config_word(child, pos + PCI_EXP_LNKCTL, reg16);
}
- link_state->clk_pm_enabled = !!enable;
+ link->clkpm_enabled = !!enable;
}
-static void pcie_check_clock_pm(struct pci_dev *pdev, int blacklist)
+static void pcie_set_clkpm(struct pcie_link_state *link, int enable)
{
- int pos;
+ /* Don't enable Clock PM if the link is not Clock PM capable */
+ if (!link->clkpm_capable && enable)
+ return;
+ /* Need nothing if the specified equals to current state */
+ if (link->clkpm_enabled == enable)
+ return;
+ pcie_set_clkpm_nocheck(link, enable);
+}
+
+static void pcie_clkpm_cap_init(struct pcie_link_state *link, int blacklist)
+{
+ int pos, capable = 1, enabled = 1;
u32 reg32;
u16 reg16;
- int capable = 1, enabled = 1;
- struct pci_dev *child_dev;
- struct pcie_link_state *link_state = pdev->link_state;
+ struct pci_dev *child;
+ struct pci_bus *linkbus = link->pdev->subordinate;
/* All functions should have the same cap and state, take the worst */
- list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
- pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
+ list_for_each_entry(child, &linkbus->devices, bus_list) {
+ pos = pci_find_capability(child, PCI_CAP_ID_EXP);
if (!pos)
return;
- pci_read_config_dword(child_dev, pos + PCI_EXP_LNKCAP, ®32);
+ pci_read_config_dword(child, pos + PCI_EXP_LNKCAP, ®32);
if (!(reg32 & PCI_EXP_LNKCAP_CLKPM)) {
capable = 0;
enabled = 0;
break;
}
- pci_read_config_word(child_dev, pos + PCI_EXP_LNKCTL, ®16);
+ pci_read_config_word(child, pos + PCI_EXP_LNKCTL, ®16);
if (!(reg16 & PCI_EXP_LNKCTL_CLKREQ_EN))
enabled = 0;
}
- link_state->clk_pm_enabled = enabled;
- link_state->bios_clk_state = enabled;
- if (!blacklist) {
- link_state->clk_pm_capable = capable;
- pcie_set_clock_pm(pdev, policy_to_clkpm_state(pdev));
- } else {
- link_state->clk_pm_capable = 0;
- pcie_set_clock_pm(pdev, 0);
- }
+ link->clkpm_enabled = enabled;
+ link->clkpm_default = enabled;
+ link->clkpm_capable = (blacklist) ? 0 : capable;
}
-static bool pcie_aspm_downstream_has_switch(struct pci_dev *pdev)
+static bool pcie_aspm_downstream_has_switch(struct pcie_link_state *link)
{
- struct pci_dev *child_dev;
+ struct pci_dev *child;
+ struct pci_bus *linkbus = link->pdev->subordinate;
- list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
- if (child_dev->pcie_type == PCI_EXP_TYPE_UPSTREAM)
+ list_for_each_entry(child, &linkbus->devices, bus_list) {
+ if (child->pcie_type == PCI_EXP_TYPE_UPSTREAM)
return true;
}
return false;
@@ -184,289 +181,263 @@
* could use common clock. If they are, configure them to use the
* common clock. That will reduce the ASPM state exit latency.
*/
-static void pcie_aspm_configure_common_clock(struct pci_dev *pdev)
+static void pcie_aspm_configure_common_clock(struct pcie_link_state *link)
{
- int pos, child_pos, i = 0;
- u16 reg16 = 0;
- struct pci_dev *child_dev;
- int same_clock = 1;
+ int ppos, cpos, same_clock = 1;
+ u16 reg16, parent_reg, child_reg[8];
unsigned long start_jiffies;
- u16 child_regs[8], parent_reg;
+ struct pci_dev *child, *parent = link->pdev;
+ struct pci_bus *linkbus = parent->subordinate;
/*
- * all functions of a slot should have the same Slot Clock
+ * All functions of a slot should have the same Slot Clock
* Configuration, so just check one function
- * */
- child_dev = list_entry(pdev->subordinate->devices.next, struct pci_dev,
- bus_list);
- BUG_ON(!child_dev->is_pcie);
+ */
+ child = list_entry(linkbus->devices.next, struct pci_dev, bus_list);
+ BUG_ON(!child->is_pcie);
/* Check downstream component if bit Slot Clock Configuration is 1 */
- child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
- pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKSTA, ®16);
+ cpos = pci_find_capability(child, PCI_CAP_ID_EXP);
+ pci_read_config_word(child, cpos + PCI_EXP_LNKSTA, ®16);
if (!(reg16 & PCI_EXP_LNKSTA_SLC))
same_clock = 0;
/* Check upstream component if bit Slot Clock Configuration is 1 */
- pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
- pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, ®16);
+ ppos = pci_find_capability(parent, PCI_CAP_ID_EXP);
+ pci_read_config_word(parent, ppos + PCI_EXP_LNKSTA, ®16);
if (!(reg16 & PCI_EXP_LNKSTA_SLC))
same_clock = 0;
/* Configure downstream component, all functions */
- list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
- child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
- pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKCTL,
- ®16);
- child_regs[i] = reg16;
+ list_for_each_entry(child, &linkbus->devices, bus_list) {
+ cpos = pci_find_capability(child, PCI_CAP_ID_EXP);
+ pci_read_config_word(child, cpos + PCI_EXP_LNKCTL, ®16);
+ child_reg[PCI_FUNC(child->devfn)] = reg16;
if (same_clock)
reg16 |= PCI_EXP_LNKCTL_CCC;
else
reg16 &= ~PCI_EXP_LNKCTL_CCC;
- pci_write_config_word(child_dev, child_pos + PCI_EXP_LNKCTL,
- reg16);
- i++;
+ pci_write_config_word(child, cpos + PCI_EXP_LNKCTL, reg16);
}
/* Configure upstream component */
- pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
+ pci_read_config_word(parent, ppos + PCI_EXP_LNKCTL, ®16);
parent_reg = reg16;
if (same_clock)
reg16 |= PCI_EXP_LNKCTL_CCC;
else
reg16 &= ~PCI_EXP_LNKCTL_CCC;
- pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
+ pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, reg16);
- /* retrain link */
+ /* Retrain link */
reg16 |= PCI_EXP_LNKCTL_RL;
- pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
+ pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, reg16);
- /* Wait for link training end */
- /* break out after waiting for timeout */
+ /* Wait for link training end. Break out after waiting for timeout */
start_jiffies = jiffies;
for (;;) {
- pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, ®16);
+ pci_read_config_word(parent, ppos + PCI_EXP_LNKSTA, ®16);
if (!(reg16 & PCI_EXP_LNKSTA_LT))
break;
if (time_after(jiffies, start_jiffies + LINK_RETRAIN_TIMEOUT))
break;
msleep(1);
}
- /* training failed -> recover */
- if (reg16 & PCI_EXP_LNKSTA_LT) {
- dev_printk (KERN_ERR, &pdev->dev, "ASPM: Could not configure"
- " common clock\n");
- i = 0;
- list_for_each_entry(child_dev, &pdev->subordinate->devices,
- bus_list) {
- child_pos = pci_find_capability(child_dev,
- PCI_CAP_ID_EXP);
- pci_write_config_word(child_dev,
- child_pos + PCI_EXP_LNKCTL,
- child_regs[i]);
- i++;
- }
- pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, parent_reg);
+ if (!(reg16 & PCI_EXP_LNKSTA_LT))
+ return;
+
+ /* Training failed. Restore common clock configurations */
+ dev_printk(KERN_ERR, &parent->dev,
+ "ASPM: Could not configure common clock\n");
+ list_for_each_entry(child, &linkbus->devices, bus_list) {
+ cpos = pci_find_capability(child, PCI_CAP_ID_EXP);
+ pci_write_config_word(child, cpos + PCI_EXP_LNKCTL,
+ child_reg[PCI_FUNC(child->devfn)]);
}
+ pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, parent_reg);
}
-/*
- * calc_L0S_latency: Convert L0s latency encoding to ns
- */
-static unsigned int calc_L0S_latency(unsigned int latency_encoding, int ac)
+/* Convert L0s latency encoding to ns */
+static u32 calc_l0s_latency(u32 encoding)
{
- unsigned int ns = 64;
-
- if (latency_encoding == 0x7) {
- if (ac)
- ns = -1U;
- else
- ns = 5*1000; /* > 4us */
- } else
- ns *= (1 << latency_encoding);
- return ns;
+ if (encoding == 0x7)
+ return (5 * 1000); /* > 4us */
+ return (64 << encoding);
}
-/*
- * calc_L1_latency: Convert L1 latency encoding to ns
- */
-static unsigned int calc_L1_latency(unsigned int latency_encoding, int ac)
+/* Convert L0s acceptable latency encoding to ns */
+static u32 calc_l0s_acceptable(u32 encoding)
{
- unsigned int ns = 1000;
+ if (encoding == 0x7)
+ return -1U;
+ return (64 << encoding);
+}
- if (latency_encoding == 0x7) {
- if (ac)
- ns = -1U;
- else
- ns = 65*1000; /* > 64us */
- } else
- ns *= (1 << latency_encoding);
- return ns;
+/* Convert L1 latency encoding to ns */
+static u32 calc_l1_latency(u32 encoding)
+{
+ if (encoding == 0x7)
+ return (65 * 1000); /* > 64us */
+ return (1000 << encoding);
+}
+
+/* Convert L1 acceptable latency encoding to ns */
+static u32 calc_l1_acceptable(u32 encoding)
+{
+ if (encoding == 0x7)
+ return -1U;
+ return (1000 << encoding);
}
static void pcie_aspm_get_cap_device(struct pci_dev *pdev, u32 *state,
- unsigned int *l0s, unsigned int *l1, unsigned int *enabled)
+ u32 *l0s, u32 *l1, u32 *enabled)
{
int pos;
u16 reg16;
- u32 reg32;
- unsigned int latency;
+ u32 reg32, encoding;
+ *l0s = *l1 = *enabled = 0;
pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
pci_read_config_dword(pdev, pos + PCI_EXP_LNKCAP, ®32);
*state = (reg32 & PCI_EXP_LNKCAP_ASPMS) >> 10;
if (*state != PCIE_LINK_STATE_L0S &&
- *state != (PCIE_LINK_STATE_L1|PCIE_LINK_STATE_L0S))
+ *state != (PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_L0S))
*state = 0;
if (*state == 0)
return;
- latency = (reg32 & PCI_EXP_LNKCAP_L0SEL) >> 12;
- *l0s = calc_L0S_latency(latency, 0);
+ encoding = (reg32 & PCI_EXP_LNKCAP_L0SEL) >> 12;
+ *l0s = calc_l0s_latency(encoding);
if (*state & PCIE_LINK_STATE_L1) {
- latency = (reg32 & PCI_EXP_LNKCAP_L1EL) >> 15;
- *l1 = calc_L1_latency(latency, 0);
+ encoding = (reg32 & PCI_EXP_LNKCAP_L1EL) >> 15;
+ *l1 = calc_l1_latency(encoding);
}
pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
- *enabled = reg16 & (PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1);
+ *enabled = reg16 & (PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1);
}
-static void pcie_aspm_cap_init(struct pci_dev *pdev)
+static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
{
- struct pci_dev *child_dev;
- u32 state, tmp;
- struct pcie_link_state *link_state = pdev->link_state;
+ u32 support, l0s, l1, enabled;
+ struct pci_dev *child, *parent = link->pdev;
+ struct pci_bus *linkbus = parent->subordinate;
+
+ if (blacklist) {
+ /* Set support state to 0, so we will disable ASPM later */
+ link->aspm_support = 0;
+ link->aspm_default = 0;
+ link->aspm_enabled = PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1;
+ return;
+ }
+
+ /* Configure common clock before checking latencies */
+ pcie_aspm_configure_common_clock(link);
/* upstream component states */
- pcie_aspm_get_cap_device(pdev, &link_state->support_state,
- &link_state->l0s_upper_latency,
- &link_state->l1_upper_latency,
- &link_state->enabled_state);
+ pcie_aspm_get_cap_device(parent, &support, &l0s, &l1, &enabled);
+ link->aspm_support = support;
+ link->latency.l0s = l0s;
+ link->latency.l1 = l1;
+ link->aspm_enabled = enabled;
+
/* downstream component states, all functions have the same setting */
- child_dev = list_entry(pdev->subordinate->devices.next, struct pci_dev,
- bus_list);
- pcie_aspm_get_cap_device(child_dev, &state,
- &link_state->l0s_down_latency,
- &link_state->l1_down_latency,
- &tmp);
- link_state->support_state &= state;
- if (!link_state->support_state)
+ child = list_entry(linkbus->devices.next, struct pci_dev, bus_list);
+ pcie_aspm_get_cap_device(child, &support, &l0s, &l1, &enabled);
+ link->aspm_support &= support;
+ link->latency.l0s = max_t(u32, link->latency.l0s, l0s);
+ link->latency.l1 = max_t(u32, link->latency.l1, l1);
+
+ if (!link->aspm_support)
return;
- link_state->enabled_state &= link_state->support_state;
- link_state->bios_aspm_state = link_state->enabled_state;
+
+ link->aspm_enabled &= link->aspm_support;
+ link->aspm_default = link->aspm_enabled;
/* ENDPOINT states*/
- list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
+ list_for_each_entry(child, &linkbus->devices, bus_list) {
int pos;
- u32 reg32;
- unsigned int latency;
- struct endpoint_state *ep_state =
- &link_state->endpoints[PCI_FUNC(child_dev->devfn)];
+ u32 reg32, encoding;
+ struct aspm_latency *acceptable =
+ &link->acceptable[PCI_FUNC(child->devfn)];
- if (child_dev->pcie_type != PCI_EXP_TYPE_ENDPOINT &&
- child_dev->pcie_type != PCI_EXP_TYPE_LEG_END)
+ if (child->pcie_type != PCI_EXP_TYPE_ENDPOINT &&
+ child->pcie_type != PCI_EXP_TYPE_LEG_END)
continue;
- pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
- pci_read_config_dword(child_dev, pos + PCI_EXP_DEVCAP, ®32);
- latency = (reg32 & PCI_EXP_DEVCAP_L0S) >> 6;
- latency = calc_L0S_latency(latency, 1);
- ep_state->l0s_acceptable_latency = latency;
- if (link_state->support_state & PCIE_LINK_STATE_L1) {
- latency = (reg32 & PCI_EXP_DEVCAP_L1) >> 9;
- latency = calc_L1_latency(latency, 1);
- ep_state->l1_acceptable_latency = latency;
+ pos = pci_find_capability(child, PCI_CAP_ID_EXP);
+ pci_read_config_dword(child, pos + PCI_EXP_DEVCAP, ®32);
+ encoding = (reg32 & PCI_EXP_DEVCAP_L0S) >> 6;
+ acceptable->l0s = calc_l0s_acceptable(encoding);
+ if (link->aspm_support & PCIE_LINK_STATE_L1) {
+ encoding = (reg32 & PCI_EXP_DEVCAP_L1) >> 9;
+ acceptable->l1 = calc_l1_acceptable(encoding);
}
}
}
-static unsigned int __pcie_aspm_check_state_one(struct pci_dev *pdev,
- unsigned int state)
+/**
+ * __pcie_aspm_check_state_one - check latency for endpoint device.
+ * @endpoint: pointer to the struct pci_dev of endpoint device
+ *
+ * TBD: The latency from the endpoint to root complex vary per switch's
+ * upstream link state above the device. Here we just do a simple check
+ * which assumes all links above the device can be in L1 state, that
+ * is we just consider the worst case. If switch's upstream link can't
+ * be put into L0S/L1, then our check is too strictly.
+ */
+static u32 __pcie_aspm_check_state_one(struct pci_dev *endpoint, u32 state)
{
- struct pci_dev *parent_dev, *tmp_dev;
- unsigned int latency, l1_latency = 0;
- struct pcie_link_state *link_state;
- struct endpoint_state *ep_state;
+ u32 l1_switch_latency = 0;
+ struct aspm_latency *acceptable;
+ struct pcie_link_state *link;
- parent_dev = pdev->bus->self;
- link_state = parent_dev->link_state;
- state &= link_state->support_state;
- if (state == 0)
- return 0;
- ep_state = &link_state->endpoints[PCI_FUNC(pdev->devfn)];
+ link = endpoint->bus->self->link_state;
+ state &= link->aspm_support;
+ acceptable = &link->acceptable[PCI_FUNC(endpoint->devfn)];
- /*
- * Check latency for endpoint device.
- * TBD: The latency from the endpoint to root complex vary per
- * switch's upstream link state above the device. Here we just do a
- * simple check which assumes all links above the device can be in L1
- * state, that is we just consider the worst case. If switch's upstream
- * link can't be put into L0S/L1, then our check is too strictly.
- */
- tmp_dev = pdev;
- while (state & (PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1)) {
- parent_dev = tmp_dev->bus->self;
- link_state = parent_dev->link_state;
- if (state & PCIE_LINK_STATE_L0S) {
- latency = max_t(unsigned int,
- link_state->l0s_upper_latency,
- link_state->l0s_down_latency);
- if (latency > ep_state->l0s_acceptable_latency)
- state &= ~PCIE_LINK_STATE_L0S;
- }
- if (state & PCIE_LINK_STATE_L1) {
- latency = max_t(unsigned int,
- link_state->l1_upper_latency,
- link_state->l1_down_latency);
- if (latency + l1_latency >
- ep_state->l1_acceptable_latency)
- state &= ~PCIE_LINK_STATE_L1;
- }
- if (!parent_dev->bus->self) /* parent_dev is a root port */
- break;
- else {
- /*
- * parent_dev is the downstream port of a switch, make
- * tmp_dev the upstream port of the switch
- */
- tmp_dev = parent_dev->bus->self;
- /*
- * every switch on the path to root complex need 1 more
- * microsecond for L1. Spec doesn't mention L0S.
- */
- if (state & PCIE_LINK_STATE_L1)
- l1_latency += 1000;
- }
+ while (link && state) {
+ if ((state & PCIE_LINK_STATE_L0S) &&
+ (link->latency.l0s > acceptable->l0s))
+ state &= ~PCIE_LINK_STATE_L0S;
+ if ((state & PCIE_LINK_STATE_L1) &&
+ (link->latency.l1 + l1_switch_latency > acceptable->l1))
+ state &= ~PCIE_LINK_STATE_L1;
+ link = link->parent;
+ /*
+ * Every switch on the path to root complex need 1
+ * more microsecond for L1. Spec doesn't mention L0s.
+ */
+ l1_switch_latency += 1000;
}
return state;
}
-static unsigned int pcie_aspm_check_state(struct pci_dev *pdev,
- unsigned int state)
+static u32 pcie_aspm_check_state(struct pcie_link_state *link, u32 state)
{
- struct pci_dev *child_dev;
+ pci_power_t power_state;
+ struct pci_dev *child;
+ struct pci_bus *linkbus = link->pdev->subordinate;
/* If no child, ignore the link */
- if (list_empty(&pdev->subordinate->devices))
+ if (list_empty(&linkbus->devices))
return state;
- list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
- if (child_dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) {
- /*
- * If downstream component of a link is pci bridge, we
- * disable ASPM for now for the link
- * */
- state = 0;
- break;
- }
- if ((child_dev->pcie_type != PCI_EXP_TYPE_ENDPOINT &&
- child_dev->pcie_type != PCI_EXP_TYPE_LEG_END))
+
+ list_for_each_entry(child, &linkbus->devices, bus_list) {
+ /*
+ * If downstream component of a link is pci bridge, we
+ * disable ASPM for now for the link
+ */
+ if (child->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE)
+ return 0;
+
+ if ((child->pcie_type != PCI_EXP_TYPE_ENDPOINT &&
+ child->pcie_type != PCI_EXP_TYPE_LEG_END))
continue;
/* Device not in D0 doesn't need check latency */
- if (child_dev->current_state == PCI_D1 ||
- child_dev->current_state == PCI_D2 ||
- child_dev->current_state == PCI_D3hot ||
- child_dev->current_state == PCI_D3cold)
+ power_state = child->current_state;
+ if (power_state == PCI_D1 || power_state == PCI_D2 ||
+ power_state == PCI_D3hot || power_state == PCI_D3cold)
continue;
- state = __pcie_aspm_check_state_one(child_dev, state);
+ state = __pcie_aspm_check_state_one(child, state);
}
return state;
}
@@ -482,90 +453,71 @@
pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
}
-static void __pcie_aspm_config_link(struct pci_dev *pdev, unsigned int state)
+static void __pcie_aspm_config_link(struct pcie_link_state *link, u32 state)
{
- struct pci_dev *child_dev;
- int valid = 1;
- struct pcie_link_state *link_state = pdev->link_state;
+ struct pci_dev *child, *parent = link->pdev;
+ struct pci_bus *linkbus = parent->subordinate;
/* If no child, disable the link */
- if (list_empty(&pdev->subordinate->devices))
+ if (list_empty(&linkbus->devices))
state = 0;
/*
- * if the downstream component has pci bridge function, don't do ASPM
- * now
+ * If the downstream component has pci bridge function, don't
+ * do ASPM now.
*/
- list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
- if (child_dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) {
- valid = 0;
- break;
- }
+ list_for_each_entry(child, &linkbus->devices, bus_list) {
+ if (child->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE)
+ return;
}
- if (!valid)
- return;
-
/*
- * spec 2.0 suggests all functions should be configured the same
- * setting for ASPM. Enabling ASPM L1 should be done in upstream
- * component first and then downstream, and vice versa for disabling
- * ASPM L1. Spec doesn't mention L0S.
+ * Spec 2.0 suggests all functions should be configured the
+ * same setting for ASPM. Enabling ASPM L1 should be done in
+ * upstream component first and then downstream, and vice
+ * versa for disabling ASPM L1. Spec doesn't mention L0S.
*/
if (state & PCIE_LINK_STATE_L1)
- __pcie_aspm_config_one_dev(pdev, state);
+ __pcie_aspm_config_one_dev(parent, state);
- list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list)
- __pcie_aspm_config_one_dev(child_dev, state);
+ list_for_each_entry(child, &linkbus->devices, bus_list)
+ __pcie_aspm_config_one_dev(child, state);
if (!(state & PCIE_LINK_STATE_L1))
- __pcie_aspm_config_one_dev(pdev, state);
+ __pcie_aspm_config_one_dev(parent, state);
- link_state->enabled_state = state;
+ link->aspm_enabled = state;
}
-static struct pcie_link_state *get_root_port_link(struct pcie_link_state *link)
+/* Check the whole hierarchy, and configure each link in the hierarchy */
+static void __pcie_aspm_configure_link_state(struct pcie_link_state *link,
+ u32 state)
{
- struct pcie_link_state *root_port_link = link;
- while (root_port_link->parent)
- root_port_link = root_port_link->parent;
- return root_port_link;
-}
+ struct pcie_link_state *leaf, *root = link->root;
-/* check the whole hierarchy, and configure each link in the hierarchy */
-static void __pcie_aspm_configure_link_state(struct pci_dev *pdev,
- unsigned int state)
-{
- struct pcie_link_state *link_state = pdev->link_state;
- struct pcie_link_state *root_port_link = get_root_port_link(link_state);
- struct pcie_link_state *leaf;
+ state &= (PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1);
- state &= PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1;
-
- /* check all links who have specific root port link */
- list_for_each_entry(leaf, &link_list, sibiling) {
- if (!list_empty(&leaf->children) ||
- get_root_port_link(leaf) != root_port_link)
+ /* Check all links who have specific root port link */
+ list_for_each_entry(leaf, &link_list, sibling) {
+ if (!list_empty(&leaf->children) || (leaf->root != root))
continue;
- state = pcie_aspm_check_state(leaf->pdev, state);
+ state = pcie_aspm_check_state(leaf, state);
}
- /* check root port link too in case it hasn't children */
- state = pcie_aspm_check_state(root_port_link->pdev, state);
-
- if (link_state->enabled_state == state)
+ /* Check root port link too in case it hasn't children */
+ state = pcie_aspm_check_state(root, state);
+ if (link->aspm_enabled == state)
return;
-
/*
- * we must change the hierarchy. See comments in
+ * We must change the hierarchy. See comments in
* __pcie_aspm_config_link for the order
**/
if (state & PCIE_LINK_STATE_L1) {
- list_for_each_entry(leaf, &link_list, sibiling) {
- if (get_root_port_link(leaf) == root_port_link)
- __pcie_aspm_config_link(leaf->pdev, state);
+ list_for_each_entry(leaf, &link_list, sibling) {
+ if (leaf->root == root)
+ __pcie_aspm_config_link(leaf, state);
}
} else {
- list_for_each_entry_reverse(leaf, &link_list, sibiling) {
- if (get_root_port_link(leaf) == root_port_link)
- __pcie_aspm_config_link(leaf->pdev, state);
+ list_for_each_entry_reverse(leaf, &link_list, sibling) {
+ if (leaf->root == root)
+ __pcie_aspm_config_link(leaf, state);
}
}
}
@@ -574,45 +526,42 @@
* pcie_aspm_configure_link_state: enable/disable PCI express link state
* @pdev: the root port or switch downstream port
*/
-static void pcie_aspm_configure_link_state(struct pci_dev *pdev,
- unsigned int state)
+static void pcie_aspm_configure_link_state(struct pcie_link_state *link,
+ u32 state)
{
down_read(&pci_bus_sem);
mutex_lock(&aspm_lock);
- __pcie_aspm_configure_link_state(pdev, state);
+ __pcie_aspm_configure_link_state(link, state);
mutex_unlock(&aspm_lock);
up_read(&pci_bus_sem);
}
-static void free_link_state(struct pci_dev *pdev)
+static void free_link_state(struct pcie_link_state *link)
{
- kfree(pdev->link_state);
- pdev->link_state = NULL;
+ link->pdev->link_state = NULL;
+ kfree(link);
}
static int pcie_aspm_sanity_check(struct pci_dev *pdev)
{
- struct pci_dev *child_dev;
- int child_pos;
+ struct pci_dev *child;
+ int pos;
u32 reg32;
-
/*
- * Some functions in a slot might not all be PCIE functions, very
- * strange. Disable ASPM for the whole slot
+ * Some functions in a slot might not all be PCIE functions,
+ * very strange. Disable ASPM for the whole slot
*/
- list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
- child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
- if (!child_pos)
+ list_for_each_entry(child, &pdev->subordinate->devices, bus_list) {
+ pos = pci_find_capability(child, PCI_CAP_ID_EXP);
+ if (!pos)
return -EINVAL;
-
/*
* Disable ASPM for pre-1.1 PCIe device, we follow MS to use
* RBER bit to determine if a function is 1.1 version device
*/
- pci_read_config_dword(child_dev, child_pos + PCI_EXP_DEVCAP,
- ®32);
+ pci_read_config_dword(child, pos + PCI_EXP_DEVCAP, ®32);
if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) {
- dev_printk(KERN_INFO, &child_dev->dev, "disabling ASPM"
+ dev_printk(KERN_INFO, &child->dev, "disabling ASPM"
" on pre-1.1 PCIe device. You can enable it"
" with 'pcie_aspm=force'\n");
return -EINVAL;
@@ -621,6 +570,47 @@
return 0;
}
+static struct pcie_link_state *pcie_aspm_setup_link_state(struct pci_dev *pdev)
+{
+ struct pcie_link_state *link;
+ int blacklist = !!pcie_aspm_sanity_check(pdev);
+
+ link = kzalloc(sizeof(*link), GFP_KERNEL);
+ if (!link)
+ return NULL;
+ INIT_LIST_HEAD(&link->sibling);
+ INIT_LIST_HEAD(&link->children);
+ INIT_LIST_HEAD(&link->link);
+ link->pdev = pdev;
+ if (pdev->pcie_type == PCI_EXP_TYPE_DOWNSTREAM) {
+ struct pcie_link_state *parent;
+ parent = pdev->bus->parent->self->link_state;
+ if (!parent) {
+ kfree(link);
+ return NULL;
+ }
+ link->parent = parent;
+ list_add(&link->link, &parent->children);
+ }
+ /* Setup a pointer to the root port link */
+ if (!link->parent)
+ link->root = link;
+ else
+ link->root = link->parent->root;
+
+ list_add(&link->sibling, &link_list);
+
+ pdev->link_state = link;
+
+ /* Check ASPM capability */
+ pcie_aspm_cap_init(link, blacklist);
+
+ /* Check Clock PM capability */
+ pcie_clkpm_cap_init(link, blacklist);
+
+ return link;
+}
+
/*
* pcie_aspm_init_link_state: Initiate PCI express link state.
* It is called after the pcie and its children devices are scaned.
@@ -628,75 +618,47 @@
*/
void pcie_aspm_init_link_state(struct pci_dev *pdev)
{
- unsigned int state;
- struct pcie_link_state *link_state;
- int error = 0;
- int blacklist;
+ u32 state;
+ struct pcie_link_state *link;
if (aspm_disabled || !pdev->is_pcie || pdev->link_state)
return;
if (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
- pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM)
+ pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM)
return;
+
+ /* VIA has a strange chipset, root port is under a bridge */
+ if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT &&
+ pdev->bus->self)
+ return;
+
down_read(&pci_bus_sem);
if (list_empty(&pdev->subordinate->devices))
goto out;
- blacklist = !!pcie_aspm_sanity_check(pdev);
-
mutex_lock(&aspm_lock);
-
- link_state = kzalloc(sizeof(*link_state), GFP_KERNEL);
- if (!link_state)
- goto unlock_out;
-
- link_state->downstream_has_switch = pcie_aspm_downstream_has_switch(pdev);
- INIT_LIST_HEAD(&link_state->children);
- INIT_LIST_HEAD(&link_state->link);
- if (pdev->bus->self) {/* this is a switch */
- struct pcie_link_state *parent_link_state;
-
- parent_link_state = pdev->bus->parent->self->link_state;
- if (!parent_link_state) {
- kfree(link_state);
- goto unlock_out;
- }
- list_add(&link_state->link, &parent_link_state->children);
- link_state->parent = parent_link_state;
- }
-
- pdev->link_state = link_state;
-
- if (!blacklist) {
- pcie_aspm_configure_common_clock(pdev);
- pcie_aspm_cap_init(pdev);
+ link = pcie_aspm_setup_link_state(pdev);
+ if (!link)
+ goto unlock;
+ /*
+ * Setup initial ASPM state
+ *
+ * If link has switch, delay the link config. The leaf link
+ * initialization will config the whole hierarchy. But we must
+ * make sure BIOS doesn't set unsupported link state.
+ */
+ if (pcie_aspm_downstream_has_switch(link)) {
+ state = pcie_aspm_check_state(link, link->aspm_default);
+ __pcie_aspm_config_link(link, state);
} else {
- link_state->enabled_state = PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1;
- link_state->bios_aspm_state = 0;
- /* Set support state to 0, so we will disable ASPM later */
- link_state->support_state = 0;
+ state = policy_to_aspm_state(link);
+ __pcie_aspm_configure_link_state(link, state);
}
- link_state->pdev = pdev;
- list_add(&link_state->sibiling, &link_list);
-
- if (link_state->downstream_has_switch) {
- /*
- * If link has switch, delay the link config. The leaf link
- * initialization will config the whole hierarchy. but we must
- * make sure BIOS doesn't set unsupported link state
- **/
- state = pcie_aspm_check_state(pdev, link_state->bios_aspm_state);
- __pcie_aspm_config_link(pdev, state);
- } else
- __pcie_aspm_configure_link_state(pdev,
- policy_to_aspm_state(pdev));
-
- pcie_check_clock_pm(pdev, blacklist);
-
-unlock_out:
- if (error)
- free_link_state(pdev);
+ /* Setup initial Clock PM state */
+ state = (link->clkpm_capable) ? policy_to_clkpm_state(link) : 0;
+ pcie_set_clkpm(link, state);
+unlock:
mutex_unlock(&aspm_lock);
out:
up_read(&pci_bus_sem);
@@ -725,11 +687,11 @@
/* All functions are removed, so just disable ASPM for the link */
__pcie_aspm_config_one_dev(parent, 0);
- list_del(&link_state->sibiling);
+ list_del(&link_state->sibling);
list_del(&link_state->link);
/* Clock PM is for endpoint device */
- free_link_state(parent);
+ free_link_state(link_state);
out:
mutex_unlock(&aspm_lock);
up_read(&pci_bus_sem);
@@ -749,7 +711,7 @@
* devices changed PM state, we should recheck if latency meets all
* functions' requirement
*/
- pcie_aspm_configure_link_state(pdev, link_state->enabled_state);
+ pcie_aspm_configure_link_state(link_state, link_state->aspm_enabled);
}
/*
@@ -772,14 +734,12 @@
down_read(&pci_bus_sem);
mutex_lock(&aspm_lock);
link_state = parent->link_state;
- link_state->support_state &=
- ~(state & (PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1));
- if (state & PCIE_LINK_STATE_CLKPM)
- link_state->clk_pm_capable = 0;
-
- __pcie_aspm_configure_link_state(parent, link_state->enabled_state);
- if (!link_state->clk_pm_capable && link_state->clk_pm_enabled)
- pcie_set_clock_pm(parent, 0);
+ link_state->aspm_support &= ~state;
+ __pcie_aspm_configure_link_state(link_state, link_state->aspm_enabled);
+ if (state & PCIE_LINK_STATE_CLKPM) {
+ link_state->clkpm_capable = 0;
+ pcie_set_clkpm(link_state, 0);
+ }
mutex_unlock(&aspm_lock);
up_read(&pci_bus_sem);
}
@@ -788,7 +748,6 @@
static int pcie_aspm_set_policy(const char *val, struct kernel_param *kp)
{
int i;
- struct pci_dev *pdev;
struct pcie_link_state *link_state;
for (i = 0; i < ARRAY_SIZE(policy_str); i++)
@@ -802,14 +761,10 @@
down_read(&pci_bus_sem);
mutex_lock(&aspm_lock);
aspm_policy = i;
- list_for_each_entry(link_state, &link_list, sibiling) {
- pdev = link_state->pdev;
- __pcie_aspm_configure_link_state(pdev,
- policy_to_aspm_state(pdev));
- if (link_state->clk_pm_capable &&
- link_state->clk_pm_enabled != policy_to_clkpm_state(pdev))
- pcie_set_clock_pm(pdev, policy_to_clkpm_state(pdev));
-
+ list_for_each_entry(link_state, &link_list, sibling) {
+ __pcie_aspm_configure_link_state(link_state,
+ policy_to_aspm_state(link_state));
+ pcie_set_clkpm(link_state, policy_to_clkpm_state(link_state));
}
mutex_unlock(&aspm_lock);
up_read(&pci_bus_sem);
@@ -838,7 +793,7 @@
struct pci_dev *pci_device = to_pci_dev(dev);
struct pcie_link_state *link_state = pci_device->link_state;
- return sprintf(buf, "%d\n", link_state->enabled_state);
+ return sprintf(buf, "%d\n", link_state->aspm_enabled);
}
static ssize_t link_state_store(struct device *dev,
@@ -846,7 +801,7 @@
const char *buf,
size_t n)
{
- struct pci_dev *pci_device = to_pci_dev(dev);
+ struct pci_dev *pdev = to_pci_dev(dev);
int state;
if (n < 1)
@@ -854,7 +809,7 @@
state = buf[0]-'0';
if (state >= 0 && state <= 3) {
/* setup link aspm state */
- pcie_aspm_configure_link_state(pci_device, state);
+ pcie_aspm_configure_link_state(pdev->link_state, state);
return n;
}
@@ -868,7 +823,7 @@
struct pci_dev *pci_device = to_pci_dev(dev);
struct pcie_link_state *link_state = pci_device->link_state;
- return sprintf(buf, "%d\n", link_state->clk_pm_enabled);
+ return sprintf(buf, "%d\n", link_state->clkpm_enabled);
}
static ssize_t clk_ctl_store(struct device *dev,
@@ -876,7 +831,7 @@
const char *buf,
size_t n)
{
- struct pci_dev *pci_device = to_pci_dev(dev);
+ struct pci_dev *pdev = to_pci_dev(dev);
int state;
if (n < 1)
@@ -885,7 +840,7 @@
down_read(&pci_bus_sem);
mutex_lock(&aspm_lock);
- pcie_set_clock_pm(pci_device, !!state);
+ pcie_set_clkpm_nocheck(pdev->link_state, !!state);
mutex_unlock(&aspm_lock);
up_read(&pci_bus_sem);
@@ -904,10 +859,10 @@
pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM) || !link_state)
return;
- if (link_state->support_state)
+ if (link_state->aspm_support)
sysfs_add_file_to_group(&pdev->dev.kobj,
&dev_attr_link_state.attr, power_group);
- if (link_state->clk_pm_capable)
+ if (link_state->clkpm_capable)
sysfs_add_file_to_group(&pdev->dev.kobj,
&dev_attr_clk_ctl.attr, power_group);
}
@@ -920,10 +875,10 @@
pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM) || !link_state)
return;
- if (link_state->support_state)
+ if (link_state->aspm_support)
sysfs_remove_file_from_group(&pdev->dev.kobj,
&dev_attr_link_state.attr, power_group);
- if (link_state->clk_pm_capable)
+ if (link_state->clkpm_capable)
sysfs_remove_file_from_group(&pdev->dev.kobj,
&dev_attr_clk_ctl.attr, power_group);
}
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index f1ae247..40e75f6 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -193,7 +193,7 @@
res->flags |= pci_calc_resource_flags(l) | IORESOURCE_SIZEALIGN;
if (type == pci_bar_io) {
l &= PCI_BASE_ADDRESS_IO_MASK;
- mask = PCI_BASE_ADDRESS_IO_MASK & 0xffff;
+ mask = PCI_BASE_ADDRESS_IO_MASK & IO_SPACE_LIMIT;
} else {
l &= PCI_BASE_ADDRESS_MEM_MASK;
mask = (u32)PCI_BASE_ADDRESS_MEM_MASK;
@@ -237,6 +237,8 @@
dev_printk(KERN_DEBUG, &dev->dev,
"reg %x 64bit mmio: %pR\n", pos, res);
}
+
+ res->flags |= IORESOURCE_MEM_64;
} else {
sz = pci_size(l, sz, mask);
@@ -287,7 +289,7 @@
struct resource *res;
int i;
- if (!child->parent) /* It's a host bus, nothing to read */
+ if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */
return;
if (dev->transparent) {
@@ -362,7 +364,10 @@
}
}
if (base <= limit) {
- res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
+ res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) |
+ IORESOURCE_MEM | IORESOURCE_PREFETCH;
+ if (res->flags & PCI_PREF_RANGE_TYPE_64)
+ res->flags |= IORESOURCE_MEM_64;
res->start = base;
res->end = limit + 0xfffff;
dev_printk(KERN_DEBUG, &dev->dev, "bridge %sbit mmio pref: %pR\n",
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index bd4253f..56552d7 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1133,6 +1133,7 @@
switch (dev->subsystem_device) {
case 0x1751: /* M2N notebook */
case 0x1821: /* M5N notebook */
+ case 0x1897: /* A6L notebook */
asus_hides_smbus = 1;
}
else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
@@ -1163,6 +1164,7 @@
switch (dev->subsystem_device) {
case 0x12bc: /* HP D330L */
case 0x12bd: /* HP D530 */
+ case 0x006a: /* HP Compaq nx9500 */
asus_hides_smbus = 1;
}
else if (dev->device == PCI_DEVICE_ID_INTEL_82875_HB)
@@ -2016,6 +2018,28 @@
PCI_DEVICE_ID_NX2_5709S,
quirk_brcm_570x_limit_vpd);
+/* Originally in EDAC sources for i82875P:
+ * Intel tells BIOS developers to hide device 6 which
+ * configures the overflow device access containing
+ * the DRBs - this is where we expose device 6.
+ * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm
+ */
+static void __devinit quirk_unhide_mch_dev6(struct pci_dev *dev)
+{
+ u8 reg;
+
+ if (pci_read_config_byte(dev, 0xF4, ®) == 0 && !(reg & 0x02)) {
+ dev_info(&dev->dev, "Enabling MCH 'Overflow' Device\n");
+ pci_write_config_byte(dev, 0xF4, reg | 0x02);
+ }
+}
+
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB,
+ quirk_unhide_mch_dev6);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB,
+ quirk_unhide_mch_dev6);
+
+
#ifdef CONFIG_PCI_MSI
/* Some chipsets do not support MSI. We cannot easily rely on setting
* PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index 86503c1..176615e 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -32,8 +32,6 @@
static void pci_destroy_dev(struct pci_dev *dev)
{
- pci_stop_dev(dev);
-
/* Remove the device from the device lists, and prevent any further
* list accesses from this device */
down_write(&pci_bus_sem);
diff --git a/drivers/pci/search.c b/drivers/pci/search.c
index 710d4ea..e8cb505 100644
--- a/drivers/pci/search.c
+++ b/drivers/pci/search.c
@@ -29,7 +29,7 @@
if (pdev->is_pcie)
return NULL;
while (1) {
- if (!pdev->bus->parent)
+ if (pci_is_root_bus(pdev->bus))
break;
pdev = pdev->bus->self;
/* a p2p bridge */
@@ -115,36 +115,6 @@
#ifdef CONFIG_PCI_LEGACY
/**
- * pci_find_slot - locate PCI device from a given PCI slot
- * @bus: number of PCI bus on which desired PCI device resides
- * @devfn: encodes number of PCI slot in which the desired PCI
- * device resides and the logical device number within that slot
- * in case of multi-function devices.
- *
- * Given a PCI bus and slot/function number, the desired PCI device
- * is located in system global list of PCI devices. If the device
- * is found, a pointer to its data structure is returned. If no
- * device is found, %NULL is returned.
- *
- * NOTE: Do not use this function any more; use pci_get_slot() instead, as
- * the PCI device returned by this function can disappear at any moment in
- * time.
- */
-struct pci_dev *pci_find_slot(unsigned int bus, unsigned int devfn)
-{
- struct pci_dev *dev = NULL;
-
- while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
- if (dev->bus->number == bus && dev->devfn == devfn) {
- pci_dev_put(dev);
- return dev;
- }
- }
- return NULL;
-}
-EXPORT_SYMBOL(pci_find_slot);
-
-/**
* pci_find_device - begin or continue searching for a PCI device by vendor/device id
* @vendor: PCI vendor id to match, or %PCI_ANY_ID to match all vendor ids
* @device: PCI device id to match, or %PCI_ANY_ID to match all device ids
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index a00f854..b636e24 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -58,7 +58,6 @@
res = list->res;
idx = res - &list->dev->resource[0];
if (pci_assign_resource(list->dev, idx)) {
- /* FIXME: get rid of this */
res->start = 0;
res->end = 0;
res->flags = 0;
@@ -143,6 +142,7 @@
struct pci_dev *bridge = bus->self;
struct pci_bus_region region;
u32 l, bu, lu, io_upper16;
+ int pref_mem64;
if (pci_is_enabled(bridge))
return;
@@ -198,16 +198,22 @@
pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, 0);
/* Set up PREF base/limit. */
+ pref_mem64 = 0;
bu = lu = 0;
pcibios_resource_to_bus(bridge, ®ion, bus->resource[2]);
if (bus->resource[2]->flags & IORESOURCE_PREFETCH) {
+ int width = 8;
l = (region.start >> 16) & 0xfff0;
l |= region.end & 0xfff00000;
- bu = upper_32_bits(region.start);
- lu = upper_32_bits(region.end);
- dev_info(&bridge->dev, " PREFETCH window: %#016llx-%#016llx\n",
- (unsigned long long)region.start,
- (unsigned long long)region.end);
+ if (bus->resource[2]->flags & IORESOURCE_MEM_64) {
+ pref_mem64 = 1;
+ bu = upper_32_bits(region.start);
+ lu = upper_32_bits(region.end);
+ width = 16;
+ }
+ dev_info(&bridge->dev, " PREFETCH window: %#0*llx-%#0*llx\n",
+ width, (unsigned long long)region.start,
+ width, (unsigned long long)region.end);
}
else {
l = 0x0000fff0;
@@ -215,9 +221,11 @@
}
pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, l);
- /* Set the upper 32 bits of PREF base & limit. */
- pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
- pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
+ if (pref_mem64) {
+ /* Set the upper 32 bits of PREF base & limit. */
+ pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
+ pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
+ }
pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl);
}
@@ -255,8 +263,25 @@
pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, 0x0);
}
- if (pmem)
+ if (pmem) {
b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH;
+ if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64)
+ b_res[2].flags |= IORESOURCE_MEM_64;
+ }
+
+ /* double check if bridge does support 64 bit pref */
+ if (b_res[2].flags & IORESOURCE_MEM_64) {
+ u32 mem_base_hi, tmp;
+ pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32,
+ &mem_base_hi);
+ pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
+ 0xffffffff);
+ pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &tmp);
+ if (!tmp)
+ b_res[2].flags &= ~IORESOURCE_MEM_64;
+ pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
+ mem_base_hi);
+ }
}
/* Helper function for sizing routines: find first available
@@ -336,6 +361,7 @@
resource_size_t aligns[12]; /* Alignments from 1Mb to 2Gb */
int order, max_order;
struct resource *b_res = find_free_bus_resource(bus, type);
+ unsigned int mem64_mask = 0;
if (!b_res)
return 0;
@@ -344,9 +370,12 @@
max_order = 0;
size = 0;
+ mem64_mask = b_res->flags & IORESOURCE_MEM_64;
+ b_res->flags &= ~IORESOURCE_MEM_64;
+
list_for_each_entry(dev, &bus->devices, bus_list) {
int i;
-
+
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
struct resource *r = &dev->resource[i];
resource_size_t r_size;
@@ -372,6 +401,7 @@
aligns[order] += align;
if (order > max_order)
max_order = order;
+ mem64_mask &= r->flags & IORESOURCE_MEM_64;
}
}
@@ -396,6 +426,7 @@
b_res->start = min_align;
b_res->end = size + min_align - 1;
b_res->flags |= IORESOURCE_STARTALIGN;
+ b_res->flags |= mem64_mask;
return 1;
}
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 1240351..b711fb7 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -135,23 +135,16 @@
}
#endif /* CONFIG_PCI_QUIRKS */
-int pci_assign_resource(struct pci_dev *dev, int resno)
+static int __pci_assign_resource(struct pci_bus *bus, struct pci_dev *dev,
+ int resno)
{
- struct pci_bus *bus = dev->bus;
struct resource *res = dev->resource + resno;
resource_size_t size, min, align;
int ret;
size = resource_size(res);
min = (res->flags & IORESOURCE_IO) ? PCIBIOS_MIN_IO : PCIBIOS_MIN_MEM;
-
align = resource_alignment(res);
- if (!align) {
- dev_info(&dev->dev, "BAR %d: can't allocate resource (bogus "
- "alignment) %pR flags %#lx\n",
- resno, res, res->flags);
- return -EINVAL;
- }
/* First, try exact prefetching match.. */
ret = pci_bus_alloc_resource(bus, res, size, align, min,
@@ -169,10 +162,7 @@
pcibios_align_resource, dev);
}
- if (ret) {
- dev_info(&dev->dev, "BAR %d: can't allocate %s resource %pR\n",
- resno, res->flags & IORESOURCE_IO ? "I/O" : "mem", res);
- } else {
+ if (!ret) {
res->flags &= ~IORESOURCE_STARTALIGN;
if (resno < PCI_BRIDGE_RESOURCES)
pci_update_resource(dev, resno);
@@ -181,6 +171,39 @@
return ret;
}
+int pci_assign_resource(struct pci_dev *dev, int resno)
+{
+ struct resource *res = dev->resource + resno;
+ resource_size_t align;
+ struct pci_bus *bus;
+ int ret;
+
+ align = resource_alignment(res);
+ if (!align) {
+ dev_info(&dev->dev, "BAR %d: can't allocate resource (bogus "
+ "alignment) %pR flags %#lx\n",
+ resno, res, res->flags);
+ return -EINVAL;
+ }
+
+ bus = dev->bus;
+ while ((ret = __pci_assign_resource(bus, dev, resno))) {
+ if (bus->parent && bus->self->transparent)
+ bus = bus->parent;
+ else
+ bus = NULL;
+ if (bus)
+ continue;
+ break;
+ }
+
+ if (ret)
+ dev_info(&dev->dev, "BAR %d: can't allocate %s resource %pR\n",
+ resno, res->flags & IORESOURCE_IO ? "I/O" : "mem", res);
+
+ return ret;
+}
+
#if 0
int pci_assign_resource_fixed(struct pci_dev *dev, int resno)
{
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index fe95ce2..eddb074 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -307,6 +307,45 @@
}
EXPORT_SYMBOL_GPL(pci_destroy_slot);
+#if defined(CONFIG_HOTPLUG_PCI) || defined(CONFIG_HOTPLUG_PCI_MODULE)
+#include <linux/pci_hotplug.h>
+/**
+ * pci_hp_create_link - create symbolic link to the hotplug driver module.
+ * @slot: struct pci_slot
+ *
+ * Helper function for pci_hotplug_core.c to create symbolic link to
+ * the hotplug driver module.
+ */
+void pci_hp_create_module_link(struct pci_slot *pci_slot)
+{
+ struct hotplug_slot *slot = pci_slot->hotplug;
+ struct kobject *kobj = NULL;
+ int no_warn;
+
+ if (!slot || !slot->ops)
+ return;
+ kobj = kset_find_obj(module_kset, slot->ops->mod_name);
+ if (!kobj)
+ return;
+ no_warn = sysfs_create_link(&pci_slot->kobj, kobj, "module");
+ kobject_put(kobj);
+}
+EXPORT_SYMBOL_GPL(pci_hp_create_module_link);
+
+/**
+ * pci_hp_remove_link - remove symbolic link to the hotplug driver module.
+ * @slot: struct pci_slot
+ *
+ * Helper function for pci_hotplug_core.c to remove symbolic link to
+ * the hotplug driver module.
+ */
+void pci_hp_remove_module_link(struct pci_slot *pci_slot)
+{
+ sysfs_remove_link(&pci_slot->kobj, "module");
+}
+EXPORT_SYMBOL_GPL(pci_hp_remove_module_link);
+#endif
+
static int pci_slot_init(void)
{
struct kset *pci_bus_kset;
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 09a503e..be2fd6f 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -958,12 +958,12 @@
status = get_u32(&state, ACER_CAP_WIRELESS);
if (ACPI_SUCCESS(status))
- rfkill_set_sw_state(wireless_rfkill, !!state);
+ rfkill_set_sw_state(wireless_rfkill, !state);
if (has_cap(ACER_CAP_BLUETOOTH)) {
status = get_u32(&state, ACER_CAP_BLUETOOTH);
if (ACPI_SUCCESS(status))
- rfkill_set_sw_state(bluetooth_rfkill, !!state);
+ rfkill_set_sw_state(bluetooth_rfkill, !state);
}
schedule_delayed_work(&acer_rfkill_work, round_jiffies_relative(HZ));
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 03bf522..8153b3e 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -180,6 +180,7 @@
*/
static int eeepc_hotk_add(struct acpi_device *device);
static int eeepc_hotk_remove(struct acpi_device *device, int type);
+static int eeepc_hotk_resume(struct acpi_device *device);
static const struct acpi_device_id eeepc_device_ids[] = {
{EEEPC_HOTK_HID, 0},
@@ -194,6 +195,7 @@
.ops = {
.add = eeepc_hotk_add,
.remove = eeepc_hotk_remove,
+ .resume = eeepc_hotk_resume,
},
};
@@ -512,15 +514,12 @@
return -1;
}
-static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
+static void eeepc_rfkill_hotplug(void)
{
struct pci_dev *dev;
struct pci_bus *bus = pci_find_bus(0, 1);
bool blocked;
- if (event != ACPI_NOTIFY_BUS_CHECK)
- return;
-
if (!bus) {
printk(EEEPC_WARNING "Unable to find PCI bus 1?\n");
return;
@@ -551,6 +550,14 @@
rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill, blocked);
}
+static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
+{
+ if (event != ACPI_NOTIFY_BUS_CHECK)
+ return;
+
+ eeepc_rfkill_hotplug();
+}
+
static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
{
static struct key_entry *key;
@@ -675,8 +682,8 @@
if (!ehotk->eeepc_wlan_rfkill)
goto wlan_fail;
- rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill,
- get_acpi(CM_ASL_WLAN) != 1);
+ rfkill_init_sw_state(ehotk->eeepc_wlan_rfkill,
+ get_acpi(CM_ASL_WLAN) != 1);
result = rfkill_register(ehotk->eeepc_wlan_rfkill);
if (result)
goto wlan_fail;
@@ -693,8 +700,8 @@
if (!ehotk->eeepc_bluetooth_rfkill)
goto bluetooth_fail;
- rfkill_set_sw_state(ehotk->eeepc_bluetooth_rfkill,
- get_acpi(CM_ASL_BLUETOOTH) != 1);
+ rfkill_init_sw_state(ehotk->eeepc_bluetooth_rfkill,
+ get_acpi(CM_ASL_BLUETOOTH) != 1);
result = rfkill_register(ehotk->eeepc_bluetooth_rfkill);
if (result)
goto bluetooth_fail;
@@ -734,6 +741,33 @@
return 0;
}
+static int eeepc_hotk_resume(struct acpi_device *device)
+{
+ if (ehotk->eeepc_wlan_rfkill) {
+ bool wlan;
+
+ /* Workaround - it seems that _PTS disables the wireless
+ without notification or changing the value read by WLAN.
+ Normally this is fine because the correct value is restored
+ from the non-volatile storage on resume, but we need to do
+ it ourself if case suspend is aborted, or we lose wireless.
+ */
+ wlan = get_acpi(CM_ASL_WLAN);
+ set_acpi(CM_ASL_WLAN, wlan);
+
+ rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill,
+ wlan != 1);
+
+ eeepc_rfkill_hotplug();
+ }
+
+ if (ehotk->eeepc_bluetooth_rfkill)
+ rfkill_set_sw_state(ehotk->eeepc_bluetooth_rfkill,
+ get_acpi(CM_ASL_BLUETOOTH) != 1);
+
+ return 0;
+}
+
/*
* Hwmon
*/
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 86e9585..40d64c0 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -1163,8 +1163,8 @@
{
struct tpacpi_rfk *atp_rfk;
int res;
- bool initial_sw_state = false;
- int initial_sw_status;
+ bool sw_state = false;
+ int sw_status;
BUG_ON(id >= TPACPI_RFK_SW_MAX || tpacpi_rfkill_switches[id]);
@@ -1185,17 +1185,17 @@
atp_rfk->id = id;
atp_rfk->ops = tp_rfkops;
- initial_sw_status = (tp_rfkops->get_status)();
- if (initial_sw_status < 0) {
+ sw_status = (tp_rfkops->get_status)();
+ if (sw_status < 0) {
printk(TPACPI_ERR
"failed to read initial state for %s, error %d\n",
- name, initial_sw_status);
+ name, sw_status);
} else {
- initial_sw_state = (initial_sw_status == TPACPI_RFK_RADIO_OFF);
+ sw_state = (sw_status == TPACPI_RFK_RADIO_OFF);
if (set_default) {
/* try to keep the initial state, since we ask the
* firmware to preserve it across S5 in NVRAM */
- rfkill_set_sw_state(atp_rfk->rfkill, initial_sw_state);
+ rfkill_init_sw_state(atp_rfk->rfkill, sw_state);
}
}
rfkill_set_hw_state(atp_rfk->rfkill, tpacpi_rfk_check_hwblock_state());
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 1132c5c..037c1e0 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1320,6 +1320,16 @@
If you have an SGI Altix with an IOC3 serial card,
say Y or M. Otherwise, say N.
+config SERIAL_MSM
+ bool "MSM on-chip serial port support"
+ depends on ARM && ARCH_MSM
+ select SERIAL_CORE
+
+config SERIAL_MSM_CONSOLE
+ bool "MSM serial console support"
+ depends on SERIAL_MSM=y
+ select SERIAL_CORE_CONSOLE
+
config SERIAL_NETX
tristate "NetX serial port support"
depends on ARM && ARCH_NETX
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 45a8658..d5a2998 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -71,6 +71,7 @@
obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o
obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
+obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index e2f6b1b..b4a7650 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -38,6 +38,10 @@
#include <asm/cacheflush.h>
#endif
+#ifdef CONFIG_SERIAL_BFIN_MODULE
+# undef CONFIG_EARLY_PRINTK
+#endif
+
/* UART name and device definitions */
#define BFIN_SERIAL_NAME "ttyBF"
#define BFIN_SERIAL_MAJOR 204
@@ -1110,6 +1114,7 @@
bfin_serial_hw_init();
for (i = 0; i < nr_active_ports; i++) {
+ spin_lock_init(&bfin_serial_ports[i].port.lock);
bfin_serial_ports[i].port.uartclk = get_sclk();
bfin_serial_ports[i].port.fifosize = BFIN_UART_TX_FIFO_SIZE;
bfin_serial_ports[i].port.ops = &bfin_serial_pops;
diff --git a/drivers/serial/msm_serial.c b/drivers/serial/msm_serial.c
new file mode 100644
index 0000000..698048f
--- /dev/null
+++ b/drivers/serial/msm_serial.c
@@ -0,0 +1,772 @@
+/*
+ * drivers/serial/msm_serial.c - driver for msm7k serial device and console
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Robert Love <rlove@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#if defined(CONFIG_SERIAL_MSM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+# define SUPPORT_SYSRQ
+#endif
+
+#include <linux/hrtimer.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include "msm_serial.h"
+
+struct msm_port {
+ struct uart_port uart;
+ char name[16];
+ struct clk *clk;
+ unsigned int imr;
+};
+
+#define UART_TO_MSM(uart_port) ((struct msm_port *) uart_port)
+
+static inline void msm_write(struct uart_port *port, unsigned int val,
+ unsigned int off)
+{
+ __raw_writel(val, port->membase + off);
+}
+
+static inline unsigned int msm_read(struct uart_port *port, unsigned int off)
+{
+ return __raw_readl(port->membase + off);
+}
+
+static void msm_stop_tx(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ msm_port->imr &= ~UART_IMR_TXLEV;
+ msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void msm_start_tx(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ msm_port->imr |= UART_IMR_TXLEV;
+ msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void msm_stop_rx(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE);
+ msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void msm_enable_ms(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ msm_port->imr |= UART_IMR_DELTA_CTS;
+ msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void handle_rx(struct uart_port *port)
+{
+ struct tty_struct *tty = port->info->port.tty;
+ unsigned int sr;
+
+ /*
+ * Handle overrun. My understanding of the hardware is that overrun
+ * is not tied to the RX buffer, so we handle the case out of band.
+ */
+ if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) {
+ port->icount.overrun++;
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+ }
+
+ /* and now the main RX loop */
+ while ((sr = msm_read(port, UART_SR)) & UART_SR_RX_READY) {
+ unsigned int c;
+ char flag = TTY_NORMAL;
+
+ c = msm_read(port, UART_RF);
+
+ if (sr & UART_SR_RX_BREAK) {
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ continue;
+ } else if (sr & UART_SR_PAR_FRAME_ERR) {
+ port->icount.frame++;
+ } else {
+ port->icount.rx++;
+ }
+
+ /* Mask conditions we're ignorning. */
+ sr &= port->read_status_mask;
+
+ if (sr & UART_SR_RX_BREAK) {
+ flag = TTY_BREAK;
+ } else if (sr & UART_SR_PAR_FRAME_ERR) {
+ flag = TTY_FRAME;
+ }
+
+ if (!uart_handle_sysrq_char(port, c))
+ tty_insert_flip_char(tty, c, flag);
+ }
+
+ tty_flip_buffer_push(tty);
+}
+
+static void handle_tx(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->info->xmit;
+ struct msm_port *msm_port = UART_TO_MSM(port);
+ int sent_tx;
+
+ if (port->x_char) {
+ msm_write(port, port->x_char, UART_TF);
+ port->icount.tx++;
+ port->x_char = 0;
+ }
+
+ while (msm_read(port, UART_SR) & UART_SR_TX_READY) {
+ if (uart_circ_empty(xmit)) {
+ /* disable tx interrupts */
+ msm_port->imr &= ~UART_IMR_TXLEV;
+ msm_write(port, msm_port->imr, UART_IMR);
+ break;
+ }
+
+ msm_write(port, xmit->buf[xmit->tail], UART_TF);
+
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ sent_tx = 1;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+}
+
+static void handle_delta_cts(struct uart_port *port)
+{
+ msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
+ port->icount.cts++;
+ wake_up_interruptible(&port->info->delta_msr_wait);
+}
+
+static irqreturn_t msm_irq(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ struct msm_port *msm_port = UART_TO_MSM(port);
+ unsigned int misr;
+
+ spin_lock(&port->lock);
+ misr = msm_read(port, UART_MISR);
+ msm_write(port, 0, UART_IMR); /* disable interrupt */
+
+ if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE))
+ handle_rx(port);
+ if (misr & UART_IMR_TXLEV)
+ handle_tx(port);
+ if (misr & UART_IMR_DELTA_CTS)
+ handle_delta_cts(port);
+
+ msm_write(port, msm_port->imr, UART_IMR); /* restore interrupt */
+ spin_unlock(&port->lock);
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int msm_tx_empty(struct uart_port *port)
+{
+ return (msm_read(port, UART_SR) & UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int msm_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR | TIOCM_RTS;
+}
+
+static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ unsigned int mr;
+
+ mr = msm_read(port, UART_MR1);
+
+ if (!(mctrl & TIOCM_RTS)) {
+ mr &= ~UART_MR1_RX_RDY_CTL;
+ msm_write(port, mr, UART_MR1);
+ msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR);
+ } else {
+ mr |= UART_MR1_RX_RDY_CTL;
+ msm_write(port, mr, UART_MR1);
+ }
+}
+
+static void msm_break_ctl(struct uart_port *port, int break_ctl)
+{
+ if (break_ctl)
+ msm_write(port, UART_CR_CMD_START_BREAK, UART_CR);
+ else
+ msm_write(port, UART_CR_CMD_STOP_BREAK, UART_CR);
+}
+
+static int msm_set_baud_rate(struct uart_port *port, unsigned int baud)
+{
+ unsigned int baud_code, rxstale, watermark;
+
+ switch (baud) {
+ case 300:
+ baud_code = UART_CSR_300;
+ rxstale = 1;
+ break;
+ case 600:
+ baud_code = UART_CSR_600;
+ rxstale = 1;
+ break;
+ case 1200:
+ baud_code = UART_CSR_1200;
+ rxstale = 1;
+ break;
+ case 2400:
+ baud_code = UART_CSR_2400;
+ rxstale = 1;
+ break;
+ case 4800:
+ baud_code = UART_CSR_4800;
+ rxstale = 1;
+ break;
+ case 9600:
+ baud_code = UART_CSR_9600;
+ rxstale = 2;
+ break;
+ case 14400:
+ baud_code = UART_CSR_14400;
+ rxstale = 3;
+ break;
+ case 19200:
+ baud_code = UART_CSR_19200;
+ rxstale = 4;
+ break;
+ case 28800:
+ baud_code = UART_CSR_28800;
+ rxstale = 6;
+ break;
+ case 38400:
+ baud_code = UART_CSR_38400;
+ rxstale = 8;
+ break;
+ case 57600:
+ baud_code = UART_CSR_57600;
+ rxstale = 16;
+ break;
+ case 115200:
+ default:
+ baud_code = UART_CSR_115200;
+ baud = 115200;
+ rxstale = 31;
+ break;
+ }
+
+ msm_write(port, baud_code, UART_CSR);
+
+ /* RX stale watermark */
+ watermark = UART_IPR_STALE_LSB & rxstale;
+ watermark |= UART_IPR_RXSTALE_LAST;
+ watermark |= UART_IPR_STALE_TIMEOUT_MSB & (rxstale << 2);
+ msm_write(port, watermark, UART_IPR);
+
+ /* set RX watermark */
+ watermark = (port->fifosize * 3) / 4;
+ msm_write(port, watermark, UART_RFWR);
+
+ /* set TX watermark */
+ msm_write(port, 10, UART_TFWR);
+
+ return baud;
+}
+
+static void msm_reset(struct uart_port *port)
+{
+ /* reset everything */
+ msm_write(port, UART_CR_CMD_RESET_RX, UART_CR);
+ msm_write(port, UART_CR_CMD_RESET_TX, UART_CR);
+ msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+ msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR);
+ msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
+ msm_write(port, UART_CR_CMD_SET_RFR, UART_CR);
+}
+
+static void msm_init_clock(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ clk_enable(msm_port->clk);
+
+ msm_write(port, 0xC0, UART_MREG);
+ msm_write(port, 0xB2, UART_NREG);
+ msm_write(port, 0x7D, UART_DREG);
+ msm_write(port, 0x1C, UART_MNDREG);
+}
+
+static int msm_startup(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+ unsigned int data, rfr_level;
+ int ret;
+
+ snprintf(msm_port->name, sizeof(msm_port->name),
+ "msm_serial%d", port->line);
+
+ ret = request_irq(port->irq, msm_irq, IRQF_TRIGGER_HIGH,
+ msm_port->name, port);
+ if (unlikely(ret))
+ return ret;
+
+ msm_init_clock(port);
+
+ if (likely(port->fifosize > 12))
+ rfr_level = port->fifosize - 12;
+ else
+ rfr_level = port->fifosize;
+
+ /* set automatic RFR level */
+ data = msm_read(port, UART_MR1);
+ data &= ~UART_MR1_AUTO_RFR_LEVEL1;
+ data &= ~UART_MR1_AUTO_RFR_LEVEL0;
+ data |= UART_MR1_AUTO_RFR_LEVEL1 & (rfr_level << 2);
+ data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level;
+ msm_write(port, data, UART_MR1);
+
+ /* make sure that RXSTALE count is non-zero */
+ data = msm_read(port, UART_IPR);
+ if (unlikely(!data)) {
+ data |= UART_IPR_RXSTALE_LAST;
+ data |= UART_IPR_STALE_LSB;
+ msm_write(port, data, UART_IPR);
+ }
+
+ msm_reset(port);
+
+ msm_write(port, 0x05, UART_CR); /* enable TX & RX */
+
+ /* turn on RX and CTS interrupts */
+ msm_port->imr = UART_IMR_RXLEV | UART_IMR_RXSTALE |
+ UART_IMR_CURRENT_CTS;
+ msm_write(port, msm_port->imr, UART_IMR);
+
+ return 0;
+}
+
+static void msm_shutdown(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ msm_port->imr = 0;
+ msm_write(port, 0, UART_IMR); /* disable interrupts */
+
+ clk_disable(msm_port->clk);
+
+ free_irq(port->irq, port);
+}
+
+static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned long flags;
+ unsigned int baud, mr;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* calculate and set baud rate */
+ baud = uart_get_baud_rate(port, termios, old, 300, 115200);
+ baud = msm_set_baud_rate(port, baud);
+ if (tty_termios_baud_rate(termios))
+ tty_termios_encode_baud_rate(termios, baud, baud);
+
+ /* calculate parity */
+ mr = msm_read(port, UART_MR2);
+ mr &= ~UART_MR2_PARITY_MODE;
+ if (termios->c_cflag & PARENB) {
+ if (termios->c_cflag & PARODD)
+ mr |= UART_MR2_PARITY_MODE_ODD;
+ else if (termios->c_cflag & CMSPAR)
+ mr |= UART_MR2_PARITY_MODE_SPACE;
+ else
+ mr |= UART_MR2_PARITY_MODE_EVEN;
+ }
+
+ /* calculate bits per char */
+ mr &= ~UART_MR2_BITS_PER_CHAR;
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ mr |= UART_MR2_BITS_PER_CHAR_5;
+ break;
+ case CS6:
+ mr |= UART_MR2_BITS_PER_CHAR_6;
+ break;
+ case CS7:
+ mr |= UART_MR2_BITS_PER_CHAR_7;
+ break;
+ case CS8:
+ default:
+ mr |= UART_MR2_BITS_PER_CHAR_8;
+ break;
+ }
+
+ /* calculate stop bits */
+ mr &= ~(UART_MR2_STOP_BIT_LEN_ONE | UART_MR2_STOP_BIT_LEN_TWO);
+ if (termios->c_cflag & CSTOPB)
+ mr |= UART_MR2_STOP_BIT_LEN_TWO;
+ else
+ mr |= UART_MR2_STOP_BIT_LEN_ONE;
+
+ /* set parity, bits per char, and stop bit */
+ msm_write(port, mr, UART_MR2);
+
+ /* calculate and set hardware flow control */
+ mr = msm_read(port, UART_MR1);
+ mr &= ~(UART_MR1_CTS_CTL | UART_MR1_RX_RDY_CTL);
+ if (termios->c_cflag & CRTSCTS) {
+ mr |= UART_MR1_CTS_CTL;
+ mr |= UART_MR1_RX_RDY_CTL;
+ }
+ msm_write(port, mr, UART_MR1);
+
+ /* Configure status bits to ignore based on termio flags. */
+ port->read_status_mask = 0;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= UART_SR_PAR_FRAME_ERR;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= UART_SR_RX_BREAK;
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *msm_type(struct uart_port *port)
+{
+ return "MSM";
+}
+
+static void msm_release_port(struct uart_port *port)
+{
+ struct platform_device *pdev = to_platform_device(port->dev);
+ struct resource *resource;
+ resource_size_t size;
+
+ resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(!resource))
+ return;
+ size = resource->end - resource->start + 1;
+
+ release_mem_region(port->mapbase, size);
+ iounmap(port->membase);
+ port->membase = NULL;
+}
+
+static int msm_request_port(struct uart_port *port)
+{
+ struct platform_device *pdev = to_platform_device(port->dev);
+ struct resource *resource;
+ resource_size_t size;
+
+ resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(!resource))
+ return -ENXIO;
+ size = resource->end - resource->start + 1;
+
+ if (unlikely(!request_mem_region(port->mapbase, size, "msm_serial")))
+ return -EBUSY;
+
+ port->membase = ioremap(port->mapbase, size);
+ if (!port->membase) {
+ release_mem_region(port->mapbase, size);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static void msm_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_MSM;
+ msm_request_port(port);
+ }
+}
+
+static int msm_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_MSM))
+ return -EINVAL;
+ if (unlikely(port->irq != ser->irq))
+ return -EINVAL;
+ return 0;
+}
+
+static void msm_power(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ switch (state) {
+ case 0:
+ clk_enable(msm_port->clk);
+ break;
+ case 3:
+ clk_disable(msm_port->clk);
+ break;
+ default:
+ printk(KERN_ERR "msm_serial: Unknown PM state %d\n", state);
+ }
+}
+
+static struct uart_ops msm_uart_pops = {
+ .tx_empty = msm_tx_empty,
+ .set_mctrl = msm_set_mctrl,
+ .get_mctrl = msm_get_mctrl,
+ .stop_tx = msm_stop_tx,
+ .start_tx = msm_start_tx,
+ .stop_rx = msm_stop_rx,
+ .enable_ms = msm_enable_ms,
+ .break_ctl = msm_break_ctl,
+ .startup = msm_startup,
+ .shutdown = msm_shutdown,
+ .set_termios = msm_set_termios,
+ .type = msm_type,
+ .release_port = msm_release_port,
+ .request_port = msm_request_port,
+ .config_port = msm_config_port,
+ .verify_port = msm_verify_port,
+ .pm = msm_power,
+};
+
+static struct msm_port msm_uart_ports[] = {
+ {
+ .uart = {
+ .iotype = UPIO_MEM,
+ .ops = &msm_uart_pops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .fifosize = 512,
+ .line = 0,
+ },
+ },
+ {
+ .uart = {
+ .iotype = UPIO_MEM,
+ .ops = &msm_uart_pops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .fifosize = 512,
+ .line = 1,
+ },
+ },
+ {
+ .uart = {
+ .iotype = UPIO_MEM,
+ .ops = &msm_uart_pops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .fifosize = 64,
+ .line = 2,
+ },
+ },
+};
+
+#define UART_NR ARRAY_SIZE(msm_uart_ports)
+
+static inline struct uart_port *get_port_from_line(unsigned int line)
+{
+ return &msm_uart_ports[line].uart;
+}
+
+#ifdef CONFIG_SERIAL_MSM_CONSOLE
+
+static void msm_console_putchar(struct uart_port *port, int c)
+{
+ while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+ ;
+ msm_write(port, c, UART_TF);
+}
+
+static void msm_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct uart_port *port;
+ struct msm_port *msm_port;
+
+ BUG_ON(co->index < 0 || co->index >= UART_NR);
+
+ port = get_port_from_line(co->index);
+ msm_port = UART_TO_MSM(port);
+
+ spin_lock(&port->lock);
+ uart_console_write(port, s, count, msm_console_putchar);
+ spin_unlock(&port->lock);
+}
+
+static int __init msm_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud, flow, bits, parity;
+
+ if (unlikely(co->index >= UART_NR || co->index < 0))
+ return -ENXIO;
+
+ port = get_port_from_line(co->index);
+
+ if (unlikely(!port->membase))
+ return -ENXIO;
+
+ port->cons = co;
+
+ msm_init_clock(port);
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ bits = 8;
+ parity = 'n';
+ flow = 'n';
+ msm_write(port, UART_MR2_BITS_PER_CHAR_8 | UART_MR2_STOP_BIT_LEN_ONE,
+ UART_MR2); /* 8N1 */
+
+ if (baud < 300 || baud > 115200)
+ baud = 115200;
+ msm_set_baud_rate(port, baud);
+
+ msm_reset(port);
+
+ printk(KERN_INFO "msm_serial: console setup on port #%d\n", port->line);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver msm_uart_driver;
+
+static struct console msm_console = {
+ .name = "ttyMSM",
+ .write = msm_console_write,
+ .device = uart_console_device,
+ .setup = msm_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &msm_uart_driver,
+};
+
+#define MSM_CONSOLE (&msm_console)
+
+#else
+#define MSM_CONSOLE NULL
+#endif
+
+static struct uart_driver msm_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "msm_serial",
+ .dev_name = "ttyMSM",
+ .nr = UART_NR,
+ .cons = MSM_CONSOLE,
+};
+
+static int __init msm_serial_probe(struct platform_device *pdev)
+{
+ struct msm_port *msm_port;
+ struct resource *resource;
+ struct uart_port *port;
+
+ if (unlikely(pdev->id < 0 || pdev->id >= UART_NR))
+ return -ENXIO;
+
+ printk(KERN_INFO "msm_serial: detected port #%d\n", pdev->id);
+
+ port = get_port_from_line(pdev->id);
+ port->dev = &pdev->dev;
+ msm_port = UART_TO_MSM(port);
+
+ msm_port->clk = clk_get(&pdev->dev, "uart_clk");
+ if (unlikely(IS_ERR(msm_port->clk)))
+ return PTR_ERR(msm_port->clk);
+ port->uartclk = clk_get_rate(msm_port->clk);
+
+ resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(!resource))
+ return -ENXIO;
+ port->mapbase = resource->start;
+
+ port->irq = platform_get_irq(pdev, 0);
+ if (unlikely(port->irq < 0))
+ return -ENXIO;
+
+ platform_set_drvdata(pdev, port);
+
+ return uart_add_one_port(&msm_uart_driver, port);
+}
+
+static int __devexit msm_serial_remove(struct platform_device *pdev)
+{
+ struct msm_port *msm_port = platform_get_drvdata(pdev);
+
+ clk_put(msm_port->clk);
+
+ return 0;
+}
+
+static struct platform_driver msm_platform_driver = {
+ .probe = msm_serial_probe,
+ .remove = msm_serial_remove,
+ .driver = {
+ .name = "msm_serial",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init msm_serial_init(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&msm_uart_driver);
+ if (unlikely(ret))
+ return ret;
+
+ ret = platform_driver_probe(&msm_platform_driver, msm_serial_probe);
+ if (unlikely(ret))
+ uart_unregister_driver(&msm_uart_driver);
+
+ printk(KERN_INFO "msm_serial: driver initialized\n");
+
+ return ret;
+}
+
+static void __exit msm_serial_exit(void)
+{
+#ifdef CONFIG_SERIAL_MSM_CONSOLE
+ unregister_console(&msm_console);
+#endif
+ platform_driver_unregister(&msm_platform_driver);
+ uart_unregister_driver(&msm_uart_driver);
+}
+
+module_init(msm_serial_init);
+module_exit(msm_serial_exit);
+
+MODULE_AUTHOR("Robert Love <rlove@google.com>");
+MODULE_DESCRIPTION("Driver for msm7x serial device");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/msm_serial.h b/drivers/serial/msm_serial.h
new file mode 100644
index 0000000..689f1fa
--- /dev/null
+++ b/drivers/serial/msm_serial.h
@@ -0,0 +1,117 @@
+/*
+ * drivers/serial/msm_serial.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Robert Love <rlove@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DRIVERS_SERIAL_MSM_SERIAL_H
+#define __DRIVERS_SERIAL_MSM_SERIAL_H
+
+#define UART_MR1 0x0000
+
+#define UART_MR1_AUTO_RFR_LEVEL0 0x3F
+#define UART_MR1_AUTO_RFR_LEVEL1 0x3FF00
+#define UART_MR1_RX_RDY_CTL (1 << 7)
+#define UART_MR1_CTS_CTL (1 << 6)
+
+#define UART_MR2 0x0004
+#define UART_MR2_ERROR_MODE (1 << 6)
+#define UART_MR2_BITS_PER_CHAR 0x30
+#define UART_MR2_BITS_PER_CHAR_5 (0x0 << 4)
+#define UART_MR2_BITS_PER_CHAR_6 (0x1 << 4)
+#define UART_MR2_BITS_PER_CHAR_7 (0x2 << 4)
+#define UART_MR2_BITS_PER_CHAR_8 (0x3 << 4)
+#define UART_MR2_STOP_BIT_LEN_ONE (0x1 << 2)
+#define UART_MR2_STOP_BIT_LEN_TWO (0x3 << 2)
+#define UART_MR2_PARITY_MODE_NONE 0x0
+#define UART_MR2_PARITY_MODE_ODD 0x1
+#define UART_MR2_PARITY_MODE_EVEN 0x2
+#define UART_MR2_PARITY_MODE_SPACE 0x3
+#define UART_MR2_PARITY_MODE 0x3
+
+#define UART_CSR 0x0008
+#define UART_CSR_115200 0xFF
+#define UART_CSR_57600 0xEE
+#define UART_CSR_38400 0xDD
+#define UART_CSR_28800 0xCC
+#define UART_CSR_19200 0xBB
+#define UART_CSR_14400 0xAA
+#define UART_CSR_9600 0x99
+#define UART_CSR_4800 0x77
+#define UART_CSR_2400 0x55
+#define UART_CSR_1200 0x44
+#define UART_CSR_600 0x33
+#define UART_CSR_300 0x22
+
+#define UART_TF 0x000C
+
+#define UART_CR 0x0010
+#define UART_CR_CMD_NULL (0 << 4)
+#define UART_CR_CMD_RESET_RX (1 << 4)
+#define UART_CR_CMD_RESET_TX (2 << 4)
+#define UART_CR_CMD_RESET_ERR (3 << 4)
+#define UART_CR_CMD_RESET_BREAK_INT (4 << 4)
+#define UART_CR_CMD_START_BREAK (5 << 4)
+#define UART_CR_CMD_STOP_BREAK (6 << 4)
+#define UART_CR_CMD_RESET_CTS (7 << 4)
+#define UART_CR_CMD_PACKET_MODE (9 << 4)
+#define UART_CR_CMD_MODE_RESET (12 << 4)
+#define UART_CR_CMD_SET_RFR (13 << 4)
+#define UART_CR_CMD_RESET_RFR (14 << 4)
+#define UART_CR_TX_DISABLE (1 << 3)
+#define UART_CR_TX_ENABLE (1 << 3)
+#define UART_CR_RX_DISABLE (1 << 3)
+#define UART_CR_RX_ENABLE (1 << 3)
+
+#define UART_IMR 0x0014
+#define UART_IMR_TXLEV (1 << 0)
+#define UART_IMR_RXSTALE (1 << 3)
+#define UART_IMR_RXLEV (1 << 4)
+#define UART_IMR_DELTA_CTS (1 << 5)
+#define UART_IMR_CURRENT_CTS (1 << 6)
+
+#define UART_IPR_RXSTALE_LAST 0x20
+#define UART_IPR_STALE_LSB 0x1F
+#define UART_IPR_STALE_TIMEOUT_MSB 0x3FF80
+
+#define UART_IPR 0x0018
+#define UART_TFWR 0x001C
+#define UART_RFWR 0x0020
+#define UART_HCR 0x0024
+
+#define UART_MREG 0x0028
+#define UART_NREG 0x002C
+#define UART_DREG 0x0030
+#define UART_MNDREG 0x0034
+#define UART_IRDA 0x0038
+#define UART_MISR_MODE 0x0040
+#define UART_MISR_RESET 0x0044
+#define UART_MISR_EXPORT 0x0048
+#define UART_MISR_VAL 0x004C
+#define UART_TEST_CTRL 0x0050
+
+#define UART_SR 0x0008
+#define UART_SR_HUNT_CHAR (1 << 7)
+#define UART_SR_RX_BREAK (1 << 6)
+#define UART_SR_PAR_FRAME_ERR (1 << 5)
+#define UART_SR_OVERRUN (1 << 4)
+#define UART_SR_TX_EMPTY (1 << 3)
+#define UART_SR_TX_READY (1 << 2)
+#define UART_SR_RX_FULL (1 << 1)
+#define UART_SR_RX_READY (1 << 0)
+
+#define UART_RF 0x000C
+#define UART_MISR 0x0010
+#define UART_ISR 0x0014
+
+#endif /* __DRIVERS_SERIAL_MSM_SERIAL_H */
diff --git a/drivers/serial/s3c2400.c b/drivers/serial/s3c2400.c
index 4873f29..fb00ed5 100644
--- a/drivers/serial/s3c2400.c
+++ b/drivers/serial/s3c2400.c
@@ -78,7 +78,7 @@
static struct platform_driver s3c2400_serial_drv = {
.probe = s3c2400_serial_probe,
- .remove = s3c24xx_serial_remove,
+ .remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
.name = "s3c2400-uart",
.owner = THIS_MODULE,
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 87c182e..b5d7cbc 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -90,7 +90,7 @@
static struct platform_driver s3c2410_serial_drv = {
.probe = s3c2410_serial_probe,
- .remove = s3c24xx_serial_remove,
+ .remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
.name = "s3c2410-uart",
.owner = THIS_MODULE,
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index fd017b3..11dcb90 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -123,7 +123,7 @@
static struct platform_driver s3c2412_serial_drv = {
.probe = s3c2412_serial_probe,
- .remove = s3c24xx_serial_remove,
+ .remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
.name = "s3c2412-uart",
.owner = THIS_MODULE,
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c
index 29cbb0a..06c5b0c 100644
--- a/drivers/serial/s3c2440.c
+++ b/drivers/serial/s3c2440.c
@@ -153,7 +153,7 @@
static struct platform_driver s3c2440_serial_drv = {
.probe = s3c2440_serial_probe,
- .remove = s3c24xx_serial_remove,
+ .remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
.name = "s3c2440-uart",
.owner = THIS_MODULE,
diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c
index ebf2fd3..786a067 100644
--- a/drivers/serial/s3c24a0.c
+++ b/drivers/serial/s3c24a0.c
@@ -94,7 +94,7 @@
static struct platform_driver s3c24a0_serial_drv = {
.probe = s3c24a0_serial_probe,
- .remove = s3c24xx_serial_remove,
+ .remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
.name = "s3c24a0-uart",
.owner = THIS_MODULE,
diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c
index 3e37852..48f1a37 100644
--- a/drivers/serial/s3c6400.c
+++ b/drivers/serial/s3c6400.c
@@ -124,7 +124,7 @@
static struct platform_driver s3c6400_serial_drv = {
.probe = s3c6400_serial_probe,
- .remove = s3c24xx_serial_remove,
+ .remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
.name = "s3c6400-uart",
.owner = THIS_MODULE,
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 93b5d75..c8851a0 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -1174,7 +1174,7 @@
EXPORT_SYMBOL_GPL(s3c24xx_serial_probe);
-int s3c24xx_serial_remove(struct platform_device *dev)
+int __devexit s3c24xx_serial_remove(struct platform_device *dev)
{
struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index 7afb948..d3fe315 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -72,7 +72,7 @@
extern int s3c24xx_serial_probe(struct platform_device *dev,
struct s3c24xx_uart_info *uart);
-extern int s3c24xx_serial_remove(struct platform_device *dev);
+extern int __devexit s3c24xx_serial_remove(struct platform_device *dev);
extern int s3c24xx_serial_initconsole(struct platform_driver *drv,
struct s3c24xx_uart_info *uart);
diff --git a/drivers/serial/sb1250-duart.c b/drivers/serial/sb1250-duart.c
index a4fb343a..319e8b8 100644
--- a/drivers/serial/sb1250-duart.c
+++ b/drivers/serial/sb1250-duart.c
@@ -204,7 +204,7 @@
{
int loops = 10000;
- while (sbd_receive_ready(sport) && loops--)
+ while (sbd_receive_ready(sport) && --loops)
read_sbdchn(sport, R_DUART_RX_HOLD);
return loops;
}
@@ -218,7 +218,7 @@
{
int loops = 10000;
- while (!sbd_transmit_ready(sport) && loops--)
+ while (!sbd_transmit_ready(sport) && --loops)
udelay(2);
return loops;
}
@@ -232,7 +232,7 @@
{
int loops = 10000;
- while (!sbd_transmit_empty(sport) && loops--)
+ while (!sbd_transmit_empty(sport) && --loops)
udelay(2);
return loops;
}
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index a94a2ab..1df5325 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -461,7 +461,7 @@
break;
udelay(1);
}
- if (limit <= 0)
+ if (limit < 0)
break;
page_bytes -= written;
ra += written;
diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c
index ac9e5d5..063a313 100644
--- a/drivers/serial/timbuart.c
+++ b/drivers/serial/timbuart.c
@@ -33,29 +33,29 @@
struct uart_port port;
struct tasklet_struct tasklet;
int usedma;
- u8 last_ier;
+ u32 last_ier;
struct platform_device *dev;
};
static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800,
921600, 1843200, 3250000};
-static void timbuart_mctrl_check(struct uart_port *port, u8 isr, u8 *ier);
+static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier);
static irqreturn_t timbuart_handleinterrupt(int irq, void *devid);
static void timbuart_stop_rx(struct uart_port *port)
{
/* spin lock held by upper layer, disable all RX interrupts */
- u8 ier = ioread8(port->membase + TIMBUART_IER) & ~RXFLAGS;
- iowrite8(ier, port->membase + TIMBUART_IER);
+ u32 ier = ioread32(port->membase + TIMBUART_IER) & ~RXFLAGS;
+ iowrite32(ier, port->membase + TIMBUART_IER);
}
static void timbuart_stop_tx(struct uart_port *port)
{
/* spinlock held by upper layer, disable TX interrupt */
- u8 ier = ioread8(port->membase + TIMBUART_IER) & ~TXBAE;
- iowrite8(ier, port->membase + TIMBUART_IER);
+ u32 ier = ioread32(port->membase + TIMBUART_IER) & ~TXBAE;
+ iowrite32(ier, port->membase + TIMBUART_IER);
}
static void timbuart_start_tx(struct uart_port *port)
@@ -72,14 +72,14 @@
u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | TIMBUART_CTRL_FLSHTX;
iowrite8(ctl, port->membase + TIMBUART_CTRL);
- iowrite8(TXBF, port->membase + TIMBUART_ISR);
+ iowrite32(TXBF, port->membase + TIMBUART_ISR);
}
static void timbuart_rx_chars(struct uart_port *port)
{
struct tty_struct *tty = port->info->port.tty;
- while (ioread8(port->membase + TIMBUART_ISR) & RXDP) {
+ while (ioread32(port->membase + TIMBUART_ISR) & RXDP) {
u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
port->icount.rx++;
tty_insert_flip_char(tty, ch, TTY_NORMAL);
@@ -97,7 +97,7 @@
{
struct circ_buf *xmit = &port->info->xmit;
- while (!(ioread8(port->membase + TIMBUART_ISR) & TXBF) &&
+ while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) &&
!uart_circ_empty(xmit)) {
iowrite8(xmit->buf[xmit->tail],
port->membase + TIMBUART_TXFIFO);
@@ -114,7 +114,7 @@
ioread8(port->membase + TIMBUART_BAUDRATE));
}
-static void timbuart_handle_tx_port(struct uart_port *port, u8 isr, u8 *ier)
+static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier)
{
struct timbuart_port *uart =
container_of(port, struct timbuart_port, port);
@@ -129,7 +129,7 @@
if (isr & TXFLAGS) {
timbuart_tx_chars(port);
/* clear all TX interrupts */
- iowrite8(TXFLAGS, port->membase + TIMBUART_ISR);
+ iowrite32(TXFLAGS, port->membase + TIMBUART_ISR);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
@@ -148,7 +148,7 @@
dev_dbg(port->dev, "%s - leaving\n", __func__);
}
-void timbuart_handle_rx_port(struct uart_port *port, u8 isr, u8 *ier)
+void timbuart_handle_rx_port(struct uart_port *port, u32 isr, u32 *ier)
{
if (isr & RXFLAGS) {
/* Some RX status is set */
@@ -161,7 +161,7 @@
timbuart_rx_chars(port);
/* ack all RX interrupts */
- iowrite8(RXFLAGS, port->membase + TIMBUART_ISR);
+ iowrite32(RXFLAGS, port->membase + TIMBUART_ISR);
}
/* always have the RX interrupts enabled */
@@ -173,11 +173,11 @@
void timbuart_tasklet(unsigned long arg)
{
struct timbuart_port *uart = (struct timbuart_port *)arg;
- u8 isr, ier = 0;
+ u32 isr, ier = 0;
spin_lock(&uart->port.lock);
- isr = ioread8(uart->port.membase + TIMBUART_ISR);
+ isr = ioread32(uart->port.membase + TIMBUART_ISR);
dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr);
if (!uart->usedma)
@@ -188,7 +188,7 @@
if (!uart->usedma)
timbuart_handle_rx_port(&uart->port, isr, &ier);
- iowrite8(ier, uart->port.membase + TIMBUART_IER);
+ iowrite32(ier, uart->port.membase + TIMBUART_IER);
spin_unlock(&uart->port.lock);
dev_dbg(uart->port.dev, "%s leaving\n", __func__);
@@ -196,9 +196,9 @@
static unsigned int timbuart_tx_empty(struct uart_port *port)
{
- u8 isr = ioread8(port->membase + TIMBUART_ISR);
+ u32 isr = ioread32(port->membase + TIMBUART_ISR);
- return (isr & TXBAE) ? TIOCSER_TEMT : 0;
+ return (isr & TXBE) ? TIOCSER_TEMT : 0;
}
static unsigned int timbuart_get_mctrl(struct uart_port *port)
@@ -222,13 +222,13 @@
iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
}
-static void timbuart_mctrl_check(struct uart_port *port, u8 isr, u8 *ier)
+static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier)
{
unsigned int cts;
if (isr & CTS_DELTA) {
/* ack */
- iowrite8(CTS_DELTA, port->membase + TIMBUART_ISR);
+ iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR);
cts = timbuart_get_mctrl(port);
uart_handle_cts_change(port, cts & TIOCM_CTS);
wake_up_interruptible(&port->info->delta_msr_wait);
@@ -255,9 +255,9 @@
dev_dbg(port->dev, "%s\n", __func__);
iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL);
- iowrite8(0xff, port->membase + TIMBUART_ISR);
+ iowrite32(0x1ff, port->membase + TIMBUART_ISR);
/* Enable all but TX interrupts */
- iowrite8(RXBAF | RXBF | RXTT | CTS_DELTA,
+ iowrite32(RXBAF | RXBF | RXTT | CTS_DELTA,
port->membase + TIMBUART_IER);
return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED,
@@ -270,7 +270,7 @@
container_of(port, struct timbuart_port, port);
dev_dbg(port->dev, "%s\n", __func__);
free_irq(port->irq, uart);
- iowrite8(0, port->membase + TIMBUART_IER);
+ iowrite32(0, port->membase + TIMBUART_IER);
}
static int get_bindex(int baud)
@@ -359,10 +359,10 @@
struct timbuart_port *uart = (struct timbuart_port *)devid;
if (ioread8(uart->port.membase + TIMBUART_IPR)) {
- uart->last_ier = ioread8(uart->port.membase + TIMBUART_IER);
+ uart->last_ier = ioread32(uart->port.membase + TIMBUART_IER);
/* disable interrupts, the tasklet enables them again */
- iowrite8(0, uart->port.membase + TIMBUART_IER);
+ iowrite32(0, uart->port.membase + TIMBUART_IER);
/* fire off bottom half */
tasklet_schedule(&uart->tasklet);
diff --git a/drivers/serial/zs.c b/drivers/serial/zs.c
index 9e6a873..d8c2809 100644
--- a/drivers/serial/zs.c
+++ b/drivers/serial/zs.c
@@ -231,7 +231,7 @@
{
int loops = 10000;
- while ((read_zsreg(zport, R0) & Rx_CH_AV) && loops--)
+ while ((read_zsreg(zport, R0) & Rx_CH_AV) && --loops)
read_zsdata(zport);
return loops;
}
@@ -241,7 +241,7 @@
struct zs_scc *scc = zport->scc;
int loops = 10000;
- while (!(read_zsreg(zport, R0) & Tx_BUF_EMP) && loops--) {
+ while (!(read_zsreg(zport, R0) & Tx_BUF_EMP) && --loops) {
zs_spin_unlock_cond_irq(&scc->zlock, irq);
udelay(2);
zs_spin_lock_cond_irq(&scc->zlock, irq);
@@ -254,7 +254,7 @@
struct zs_scc *scc = zport->scc;
int loops = 10000;
- while (!(read_zsreg(zport, R1) & ALL_SNT) && loops--) {
+ while (!(read_zsreg(zport, R1) & ALL_SNT) && --loops) {
zs_spin_unlock_cond_irq(&scc->zlock, irq);
udelay(2);
zs_spin_lock_cond_irq(&scc->zlock, irq);
diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c
index 581232b..90b29b5 100644
--- a/drivers/staging/serqt_usb2/serqt_usb2.c
+++ b/drivers/staging/serqt_usb2/serqt_usb2.c
@@ -284,21 +284,12 @@
return;
}
-static void ProcessRxChar(struct usb_serial_port *port, unsigned char Data)
+static void ProcessRxChar(struct tty_struct *tty, struct usb_serial_port *port,
+ unsigned char data)
{
- struct tty_struct *tty;
struct urb *urb = port->read_urb;
- tty = tty_port_tty_get(&port->port);
-
- /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
-
- if (tty && urb->actual_length) {
- tty_buffer_request_room(tty, 1);
- tty_insert_flip_string(tty, &Data, 1);
- /* tty_flip_buffer_push(tty); */
- }
-
- return;
+ if (urb->actual_length)
+ tty_insert_flip_char(tty, data, TTY_NORMAL);
}
static void qt_write_bulk_callback(struct urb *urb)
@@ -435,8 +426,10 @@
case 0xff:
dbg("No status sequence. \n");
- ProcessRxChar(port, data[i]);
- ProcessRxChar(port, data[i + 1]);
+ if (tty) {
+ ProcessRxChar(tty, port, data[i]);
+ ProcessRxChar(tty, port, data[i + 1]);
+ }
i += 2;
break;
}
@@ -444,10 +437,8 @@
continue;
}
- if (tty && urb->actual_length) {
- tty_buffer_request_room(tty, 1);
- tty_insert_flip_string(tty, (data + i), 1);
- }
+ if (tty && urb->actual_length)
+ tty_insert_flip_char(tty, data[i], TTY_NORMAL);
}
tty_flip_buffer_push(tty);
diff --git a/fs/minix/minix.h b/fs/minix/minix.h
index cb7fdd1..9dcf95b4 100644
--- a/fs/minix/minix.h
+++ b/fs/minix/minix.h
@@ -1,3 +1,6 @@
+#ifndef FS_MINIX_H
+#define FS_MINIX_H
+
#include <linux/fs.h>
#include <linux/pagemap.h>
#include <linux/minix_fs.h>
@@ -86,3 +89,5 @@
{
return list_entry(inode, struct minix_inode_info, vfs_inode);
}
+
+#endif /* FS_MINIX_H */
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index 32e4b2f..786e7b8 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -49,6 +49,8 @@
#define IORESOURCE_SIZEALIGN 0x00020000 /* size indicates alignment */
#define IORESOURCE_STARTALIGN 0x00040000 /* start field is alignment */
+#define IORESOURCE_MEM_64 0x00100000
+
#define IORESOURCE_EXCLUSIVE 0x08000000 /* Userland may not map this resource */
#define IORESOURCE_DISABLED 0x10000000
#define IORESOURCE_UNSET 0x20000000
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 092e82e..93a7c08 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -15,7 +15,7 @@
{
struct pci_bus *pbus = pdev->bus;
/* Find a PCI root bus */
- while (pbus->parent)
+ while (!pci_is_root_bus(pbus))
pbus = pbus->parent;
return acpi_get_pci_rootbridge_handle(pci_domain_nr(pbus),
pbus->number);
@@ -23,7 +23,7 @@
static inline acpi_handle acpi_pci_get_bridge_handle(struct pci_bus *pbus)
{
- if (pbus->parent)
+ if (!pci_is_root_bus(pbus))
return DEVICE_ACPI_HANDLE(&(pbus->self->dev));
return acpi_get_pci_rootbridge_handle(pci_domain_nr(pbus),
pbus->number);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 8e366bb..1365c74 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -607,8 +607,6 @@
struct pci_dev __deprecated *pci_find_device(unsigned int vendor,
unsigned int device,
struct pci_dev *from);
-struct pci_dev __deprecated *pci_find_slot(unsigned int bus,
- unsigned int devfn);
#endif /* CONFIG_PCI_LEGACY */
enum pci_lost_interrupt_reason {
@@ -647,6 +645,7 @@
int where, u16 val);
int pci_bus_write_config_dword(struct pci_bus *bus, unsigned int devfn,
int where, u32 val);
+struct pci_ops *pci_bus_set_ops(struct pci_bus *bus, struct pci_ops *ops);
static inline int pci_read_config_byte(struct pci_dev *dev, int where, u8 *val)
{
@@ -711,8 +710,8 @@
int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc);
int pcie_get_readrq(struct pci_dev *dev);
int pcie_set_readrq(struct pci_dev *dev, int rq);
+int __pci_reset_function(struct pci_dev *dev);
int pci_reset_function(struct pci_dev *dev);
-int pci_execute_reset_function(struct pci_dev *dev);
void pci_update_resource(struct pci_dev *dev, int resno);
int __must_check pci_assign_resource(struct pci_dev *dev, int i);
int pci_select_bars(struct pci_dev *dev, unsigned long flags);
@@ -732,7 +731,7 @@
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
bool pci_pme_capable(struct pci_dev *dev, pci_power_t state);
void pci_pme_active(struct pci_dev *dev, bool enable);
-int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable);
+int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable);
int pci_wake_from_d3(struct pci_dev *dev, bool enable);
pci_power_t pci_target_state(struct pci_dev *dev);
int pci_prepare_to_sleep(struct pci_dev *dev);
@@ -798,7 +797,7 @@
int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
int pass);
-void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *),
+void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
void *userdata);
int pci_cfg_space_size_ext(struct pci_dev *dev);
int pci_cfg_space_size(struct pci_dev *dev);
@@ -888,6 +887,17 @@
extern int pcie_aspm_enabled(void);
#endif
+#ifndef CONFIG_PCIE_ECRC
+static inline void pcie_set_ecrc_checking(struct pci_dev *dev)
+{
+ return;
+}
+static inline void pcie_ecrc_get_policy(char *str) {};
+#else
+extern void pcie_set_ecrc_checking(struct pci_dev *dev);
+extern void pcie_ecrc_get_policy(char *str);
+#endif
+
#define pci_enable_msi(pdev) pci_enable_msi_block(pdev, 1)
#ifdef CONFIG_HT_IRQ
@@ -944,12 +954,6 @@
return NULL;
}
-static inline struct pci_dev *pci_find_slot(unsigned int bus,
- unsigned int devfn)
-{
- return NULL;
-}
-
static inline struct pci_dev *pci_get_device(unsigned int vendor,
unsigned int device,
struct pci_dev *from)
@@ -1105,6 +1109,10 @@
#include <asm/pci.h>
+#ifndef PCIBIOS_MAX_MEM_32
+#define PCIBIOS_MAX_MEM_32 (-1)
+#endif
+
/* these helpers provide future and backwards compatibility
* for accessing popular PCI BAR info */
#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start)
@@ -1261,5 +1269,10 @@
}
#endif
+#if defined(CONFIG_HOTPLUG_PCI) || defined(CONFIG_HOTPLUG_PCI_MODULE)
+extern void pci_hp_create_module_link(struct pci_slot *pci_slot);
+extern void pci_hp_remove_module_link(struct pci_slot *pci_slot);
+#endif
+
#endif /* __KERNEL__ */
#endif /* LINUX_PCI_H */
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index 2099874..b3646cd 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -66,17 +66,10 @@
PCIE_LNK_SPEED_UNKNOWN = 0xFF,
};
-struct hotplug_slot;
-struct hotplug_slot_attribute {
- struct attribute attr;
- ssize_t (*show)(struct hotplug_slot *, char *);
- ssize_t (*store)(struct hotplug_slot *, const char *, size_t);
-};
-#define to_hotplug_attr(n) container_of(n, struct hotplug_slot_attribute, attr);
-
/**
* struct hotplug_slot_ops -the callbacks that the hotplug pci core can use
* @owner: The module owner of this structure
+ * @mod_name: The module name (KBUILD_MODNAME) of this structure
* @enable_slot: Called when the user wants to enable a specific pci slot
* @disable_slot: Called when the user wants to disable a specific pci slot
* @set_attention_status: Called to set the specific slot's attention LED to
@@ -109,6 +102,7 @@
*/
struct hotplug_slot_ops {
struct module *owner;
+ const char *mod_name;
int (*enable_slot) (struct hotplug_slot *slot);
int (*disable_slot) (struct hotplug_slot *slot);
int (*set_attention_status) (struct hotplug_slot *slot, u8 value);
@@ -167,12 +161,21 @@
return pci_slot_name(slot->pci_slot);
}
-extern int pci_hp_register(struct hotplug_slot *, struct pci_bus *, int nr,
- const char *name);
+extern int __pci_hp_register(struct hotplug_slot *slot, struct pci_bus *pbus,
+ int nr, const char *name,
+ struct module *owner, const char *mod_name);
extern int pci_hp_deregister(struct hotplug_slot *slot);
extern int __must_check pci_hp_change_slot_info (struct hotplug_slot *slot,
struct hotplug_slot_info *info);
+static inline int pci_hp_register(struct hotplug_slot *slot,
+ struct pci_bus *pbus,
+ int devnr, const char *name)
+{
+ return __pci_hp_register(slot, pbus, devnr, name,
+ THIS_MODULE, KBUILD_MODNAME);
+}
+
/* PCI Setting Record (Type 0) */
struct hpp_type0 {
u32 revision;
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index 616bf8b..83b02f5 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -295,8 +295,9 @@
#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */
#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */
+#define PCI_MSI_MASK_32 12 /* Mask bits register for 32-bit devices */
#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */
-#define PCI_MSI_MASK_BIT 16 /* Mask bits register */
+#define PCI_MSI_MASK_64 16 /* Mask bits register for 64-bit devices */
/* MSI-X registers (these are at offset PCI_MSIX_FLAGS) */
#define PCI_MSIX_FLAGS 2
@@ -304,7 +305,6 @@
#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
#define PCI_MSIX_FLAGS_MASKALL (1 << 14)
#define PCI_MSIX_FLAGS_BIRMASK (7 << 0)
-#define PCI_MSIX_FLAGS_BITMASK (1 << 0)
/* CompactPCI Hotswap Register */
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index 16e39c7..e73e242 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -160,8 +160,9 @@
* the rfkill structure. Before calling this function the driver needs
* to be ready to service method calls from rfkill.
*
- * If the software blocked state is not set before registration,
- * set_block will be called to initialize it to a default value.
+ * If rfkill_init_sw_state() is not called before registration,
+ * set_block() will be called to initialize the software blocked state
+ * to a default value.
*
* If the hardware blocked state is not set before registration,
* it is assumed to be unblocked.
@@ -234,9 +235,11 @@
* rfkill drivers that get events when the soft-blocked state changes
* (yes, some platforms directly act on input but allow changing again)
* use this function to notify the rfkill core (and through that also
- * userspace) of the current state. It is not necessary to notify on
- * resume; since hibernation can always change the soft-blocked state,
- * the rfkill core will unconditionally restore the previous state.
+ * userspace) of the current state.
+ *
+ * Drivers should also call this function after resume if the state has
+ * been changed by the user. This only makes sense for "persistent"
+ * devices (see rfkill_init_sw_state()).
*
* This function can be called in any context, even from within rfkill
* callbacks.
@@ -247,6 +250,22 @@
bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked);
/**
+ * rfkill_init_sw_state - Initialize persistent software block state
+ * @rfkill: pointer to the rfkill class to modify.
+ * @state: the current software block state to set
+ *
+ * rfkill drivers that preserve their software block state over power off
+ * use this function to notify the rfkill core (and through that also
+ * userspace) of their initial state. It should only be used before
+ * registration.
+ *
+ * In addition, it marks the device as "persistent", an attribute which
+ * can be read by userspace. Persistent devices are expected to preserve
+ * their own state when suspended.
+ */
+void rfkill_init_sw_state(struct rfkill *rfkill, bool blocked);
+
+/**
* rfkill_set_states - Set the internal rfkill block states
* @rfkill: pointer to the rfkill class to modify.
* @sw: the current software block state to set
@@ -307,6 +326,10 @@
return blocked;
}
+static inline void rfkill_init_sw_state(struct rfkill *rfkill, bool blocked)
+{
+}
+
static inline void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw)
{
}
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 6fd80c4..23d2fb0 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -171,6 +171,9 @@
/* Timberdale UART */
#define PORT_TIMBUART 87
+/* Qualcomm MSM SoCs */
+#define PORT_MSM 88
+
#ifdef __KERNEL__
#include <linux/compiler.h>
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index 96c0d93..850db2e 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -323,6 +323,7 @@
#define UART_OMAP_MVER 0x14 /* Module version register */
#define UART_OMAP_SYSC 0x15 /* System configuration register */
#define UART_OMAP_SYSS 0x16 /* System status register */
+#define UART_OMAP_WER 0x17 /* Wake-up enable register */
#endif /* _LINUX_SERIAL_REG_H */
diff --git a/include/net/iucv/af_iucv.h b/include/net/iucv/af_iucv.h
index 21ee49f..f82a1e8 100644
--- a/include/net/iucv/af_iucv.h
+++ b/include/net/iucv/af_iucv.h
@@ -94,8 +94,6 @@
poll_table *wait);
void iucv_sock_link(struct iucv_sock_list *l, struct sock *s);
void iucv_sock_unlink(struct iucv_sock_list *l, struct sock *s);
-int iucv_sock_wait_state(struct sock *sk, int state, int state2,
- unsigned long timeo);
int iucv_sock_wait_cnt(struct sock *sk, unsigned long timeo);
void iucv_accept_enqueue(struct sock *parent, struct sock *sk);
void iucv_accept_unlink(struct sock *sk);
diff --git a/net/ieee802154/af_ieee802154.c b/net/ieee802154/af_ieee802154.c
index 882a927..3bb6bdb 100644
--- a/net/ieee802154/af_ieee802154.c
+++ b/net/ieee802154/af_ieee802154.c
@@ -39,14 +39,6 @@
#include "af802154.h"
-#define DBG_DUMP(data, len) { \
- int i; \
- pr_debug("function: %s: data: len %d:\n", __func__, len); \
- for (i = 0; i < len; i++) {\
- pr_debug("%02x: %02x\n", i, (data)[i]); \
- } \
-}
-
/*
* Utility function for families
*/
@@ -302,10 +294,12 @@
static int ieee802154_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt, struct net_device *orig_dev)
{
- DBG_DUMP(skb->data, skb->len);
if (!netif_running(dev))
return -ENODEV;
pr_debug("got frame, type %d, dev %p\n", dev->type, dev);
+#ifdef DEBUG
+ print_hex_dump_bytes("ieee802154_rcv ", DUMP_PREFIX_NONE, skb->data, skb->len);
+#endif
if (!net_eq(dev_net(dev), &init_net))
goto drop;
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index cd76b3c..65b3a8b 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1085,8 +1085,16 @@
now = jiffies;
if (!rt_caching(dev_net(rt->u.dst.dev))) {
- rt_drop(rt);
- return 0;
+ /*
+ * If we're not caching, just tell the caller we
+ * were successful and don't touch the route. The
+ * caller hold the sole reference to the cache entry, and
+ * it will be released when the caller is done with it.
+ * If we drop it here, the callers have no way to resolve routes
+ * when we're not caching. Instead, just point *rp at rt, so
+ * the caller gets a single use out of the route
+ */
+ goto report_and_exit;
}
rthp = &rt_hash_table[hash].chain;
@@ -1217,6 +1225,8 @@
rcu_assign_pointer(rt_hash_table[hash].chain, rt);
spin_unlock_bh(rt_hash_lock_addr(hash));
+
+report_and_exit:
if (rp)
*rp = rt;
else
diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index 656cbd1..6be5f92 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -54,6 +54,38 @@
#define CB_TRGCLS(skb) ((skb)->cb + CB_TAG_LEN) /* iucv msg target class */
#define CB_TRGCLS_LEN (TRGCLS_SIZE)
+#define __iucv_sock_wait(sk, condition, timeo, ret) \
+do { \
+ DEFINE_WAIT(__wait); \
+ long __timeo = timeo; \
+ ret = 0; \
+ while (!(condition)) { \
+ prepare_to_wait(sk->sk_sleep, &__wait, TASK_INTERRUPTIBLE); \
+ if (!__timeo) { \
+ ret = -EAGAIN; \
+ break; \
+ } \
+ if (signal_pending(current)) { \
+ ret = sock_intr_errno(__timeo); \
+ break; \
+ } \
+ release_sock(sk); \
+ __timeo = schedule_timeout(__timeo); \
+ lock_sock(sk); \
+ ret = sock_error(sk); \
+ if (ret) \
+ break; \
+ } \
+ finish_wait(sk->sk_sleep, &__wait); \
+} while (0)
+
+#define iucv_sock_wait(sk, condition, timeo) \
+({ \
+ int __ret = 0; \
+ if (!(condition)) \
+ __iucv_sock_wait(sk, condition, timeo, __ret); \
+ __ret; \
+})
static void iucv_sock_kill(struct sock *sk);
static void iucv_sock_close(struct sock *sk);
@@ -238,6 +270,48 @@
return msg->length;
}
+/**
+ * iucv_sock_in_state() - check for specific states
+ * @sk: sock structure
+ * @state: first iucv sk state
+ * @state: second iucv sk state
+ *
+ * Returns true if the socket in either in the first or second state.
+ */
+static int iucv_sock_in_state(struct sock *sk, int state, int state2)
+{
+ return (sk->sk_state == state || sk->sk_state == state2);
+}
+
+/**
+ * iucv_below_msglim() - function to check if messages can be sent
+ * @sk: sock structure
+ *
+ * Returns true if the send queue length is lower than the message limit.
+ * Always returns true if the socket is not connected (no iucv path for
+ * checking the message limit).
+ */
+static inline int iucv_below_msglim(struct sock *sk)
+{
+ struct iucv_sock *iucv = iucv_sk(sk);
+
+ if (sk->sk_state != IUCV_CONNECTED)
+ return 1;
+ return (skb_queue_len(&iucv->send_skb_q) < iucv->path->msglim);
+}
+
+/**
+ * iucv_sock_wake_msglim() - Wake up thread waiting on msg limit
+ */
+static void iucv_sock_wake_msglim(struct sock *sk)
+{
+ read_lock(&sk->sk_callback_lock);
+ if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
+ wake_up_interruptible_all(sk->sk_sleep);
+ sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT);
+ read_unlock(&sk->sk_callback_lock);
+}
+
/* Timers */
static void iucv_sock_timeout(unsigned long arg)
{
@@ -329,7 +403,9 @@
timeo = sk->sk_lingertime;
else
timeo = IUCV_DISCONN_TIMEOUT;
- err = iucv_sock_wait_state(sk, IUCV_CLOSED, 0, timeo);
+ err = iucv_sock_wait(sk,
+ iucv_sock_in_state(sk, IUCV_CLOSED, 0),
+ timeo);
}
case IUCV_CLOSING: /* fall through */
@@ -510,39 +586,6 @@
return NULL;
}
-int iucv_sock_wait_state(struct sock *sk, int state, int state2,
- unsigned long timeo)
-{
- DECLARE_WAITQUEUE(wait, current);
- int err = 0;
-
- add_wait_queue(sk->sk_sleep, &wait);
- while (sk->sk_state != state && sk->sk_state != state2) {
- set_current_state(TASK_INTERRUPTIBLE);
-
- if (!timeo) {
- err = -EAGAIN;
- break;
- }
-
- if (signal_pending(current)) {
- err = sock_intr_errno(timeo);
- break;
- }
-
- release_sock(sk);
- timeo = schedule_timeout(timeo);
- lock_sock(sk);
-
- err = sock_error(sk);
- if (err)
- break;
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(sk->sk_sleep, &wait);
- return err;
-}
-
/* Bind an unbound socket */
static int iucv_sock_bind(struct socket *sock, struct sockaddr *addr,
int addr_len)
@@ -687,8 +730,9 @@
}
if (sk->sk_state != IUCV_CONNECTED) {
- err = iucv_sock_wait_state(sk, IUCV_CONNECTED, IUCV_DISCONN,
- sock_sndtimeo(sk, flags & O_NONBLOCK));
+ err = iucv_sock_wait(sk, iucv_sock_in_state(sk, IUCV_CONNECTED,
+ IUCV_DISCONN),
+ sock_sndtimeo(sk, flags & O_NONBLOCK));
}
if (sk->sk_state == IUCV_DISCONN) {
@@ -842,9 +886,11 @@
struct iucv_message txmsg;
struct cmsghdr *cmsg;
int cmsg_done;
+ long timeo;
char user_id[9];
char appl_id[9];
int err;
+ int noblock = msg->msg_flags & MSG_DONTWAIT;
err = sock_error(sk);
if (err)
@@ -864,108 +910,119 @@
goto out;
}
- if (sk->sk_state == IUCV_CONNECTED) {
- /* initialize defaults */
- cmsg_done = 0; /* check for duplicate headers */
- txmsg.class = 0;
+ /* Return if the socket is not in connected state */
+ if (sk->sk_state != IUCV_CONNECTED) {
+ err = -ENOTCONN;
+ goto out;
+ }
- /* iterate over control messages */
- for (cmsg = CMSG_FIRSTHDR(msg); cmsg;
- cmsg = CMSG_NXTHDR(msg, cmsg)) {
+ /* initialize defaults */
+ cmsg_done = 0; /* check for duplicate headers */
+ txmsg.class = 0;
- if (!CMSG_OK(msg, cmsg)) {
- err = -EINVAL;
- goto out;
- }
+ /* iterate over control messages */
+ for (cmsg = CMSG_FIRSTHDR(msg); cmsg;
+ cmsg = CMSG_NXTHDR(msg, cmsg)) {
- if (cmsg->cmsg_level != SOL_IUCV)
- continue;
-
- if (cmsg->cmsg_type & cmsg_done) {
- err = -EINVAL;
- goto out;
- }
- cmsg_done |= cmsg->cmsg_type;
-
- switch (cmsg->cmsg_type) {
- case SCM_IUCV_TRGCLS:
- if (cmsg->cmsg_len != CMSG_LEN(TRGCLS_SIZE)) {
- err = -EINVAL;
- goto out;
- }
-
- /* set iucv message target class */
- memcpy(&txmsg.class,
- (void *) CMSG_DATA(cmsg), TRGCLS_SIZE);
-
- break;
-
- default:
- err = -EINVAL;
- goto out;
- break;
- }
- }
-
- /* allocate one skb for each iucv message:
- * this is fine for SOCK_SEQPACKET (unless we want to support
- * segmented records using the MSG_EOR flag), but
- * for SOCK_STREAM we might want to improve it in future */
- if (!(skb = sock_alloc_send_skb(sk, len,
- msg->msg_flags & MSG_DONTWAIT,
- &err)))
+ if (!CMSG_OK(msg, cmsg)) {
+ err = -EINVAL;
goto out;
-
- if (memcpy_fromiovec(skb_put(skb, len), msg->msg_iov, len)) {
- err = -EFAULT;
- goto fail;
}
- /* increment and save iucv message tag for msg_completion cbk */
- txmsg.tag = iucv->send_tag++;
- memcpy(CB_TAG(skb), &txmsg.tag, CB_TAG_LEN);
- skb_queue_tail(&iucv->send_skb_q, skb);
+ if (cmsg->cmsg_level != SOL_IUCV)
+ continue;
- if (((iucv->path->flags & IUCV_IPRMDATA) & iucv->flags)
- && skb->len <= 7) {
- err = iucv_send_iprm(iucv->path, &txmsg, skb);
+ if (cmsg->cmsg_type & cmsg_done) {
+ err = -EINVAL;
+ goto out;
+ }
+ cmsg_done |= cmsg->cmsg_type;
- /* on success: there is no message_complete callback
- * for an IPRMDATA msg; remove skb from send queue */
- if (err == 0) {
- skb_unlink(skb, &iucv->send_skb_q);
- kfree_skb(skb);
+ switch (cmsg->cmsg_type) {
+ case SCM_IUCV_TRGCLS:
+ if (cmsg->cmsg_len != CMSG_LEN(TRGCLS_SIZE)) {
+ err = -EINVAL;
+ goto out;
}
- /* this error should never happen since the
- * IUCV_IPRMDATA path flag is set... sever path */
- if (err == 0x15) {
- iucv_path_sever(iucv->path, NULL);
- skb_unlink(skb, &iucv->send_skb_q);
- err = -EPIPE;
- goto fail;
- }
- } else
- err = iucv_message_send(iucv->path, &txmsg, 0, 0,
- (void *) skb->data, skb->len);
- if (err) {
- if (err == 3) {
- user_id[8] = 0;
- memcpy(user_id, iucv->dst_user_id, 8);
- appl_id[8] = 0;
- memcpy(appl_id, iucv->dst_name, 8);
- pr_err("Application %s on z/VM guest %s"
- " exceeds message limit\n",
- user_id, appl_id);
- }
+ /* set iucv message target class */
+ memcpy(&txmsg.class,
+ (void *) CMSG_DATA(cmsg), TRGCLS_SIZE);
+
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ break;
+ }
+ }
+
+ /* allocate one skb for each iucv message:
+ * this is fine for SOCK_SEQPACKET (unless we want to support
+ * segmented records using the MSG_EOR flag), but
+ * for SOCK_STREAM we might want to improve it in future */
+ skb = sock_alloc_send_skb(sk, len, noblock, &err);
+ if (!skb)
+ goto out;
+ if (memcpy_fromiovec(skb_put(skb, len), msg->msg_iov, len)) {
+ err = -EFAULT;
+ goto fail;
+ }
+
+ /* wait if outstanding messages for iucv path has reached */
+ timeo = sock_sndtimeo(sk, noblock);
+ err = iucv_sock_wait(sk, iucv_below_msglim(sk), timeo);
+ if (err)
+ goto fail;
+
+ /* return -ECONNRESET if the socket is no longer connected */
+ if (sk->sk_state != IUCV_CONNECTED) {
+ err = -ECONNRESET;
+ goto fail;
+ }
+
+ /* increment and save iucv message tag for msg_completion cbk */
+ txmsg.tag = iucv->send_tag++;
+ memcpy(CB_TAG(skb), &txmsg.tag, CB_TAG_LEN);
+ skb_queue_tail(&iucv->send_skb_q, skb);
+
+ if (((iucv->path->flags & IUCV_IPRMDATA) & iucv->flags)
+ && skb->len <= 7) {
+ err = iucv_send_iprm(iucv->path, &txmsg, skb);
+
+ /* on success: there is no message_complete callback
+ * for an IPRMDATA msg; remove skb from send queue */
+ if (err == 0) {
+ skb_unlink(skb, &iucv->send_skb_q);
+ kfree_skb(skb);
+ }
+
+ /* this error should never happen since the
+ * IUCV_IPRMDATA path flag is set... sever path */
+ if (err == 0x15) {
+ iucv_path_sever(iucv->path, NULL);
skb_unlink(skb, &iucv->send_skb_q);
err = -EPIPE;
goto fail;
}
-
- } else {
- err = -ENOTCONN;
- goto out;
+ } else
+ err = iucv_message_send(iucv->path, &txmsg, 0, 0,
+ (void *) skb->data, skb->len);
+ if (err) {
+ if (err == 3) {
+ user_id[8] = 0;
+ memcpy(user_id, iucv->dst_user_id, 8);
+ appl_id[8] = 0;
+ memcpy(appl_id, iucv->dst_name, 8);
+ pr_err("Application %s on z/VM guest %s"
+ " exceeds message limit\n",
+ appl_id, user_id);
+ err = -EAGAIN;
+ } else
+ err = -EPIPE;
+ skb_unlink(skb, &iucv->send_skb_q);
+ goto fail;
}
release_sock(sk);
@@ -1581,7 +1638,11 @@
spin_unlock_irqrestore(&list->lock, flags);
- kfree_skb(this);
+ if (this) {
+ kfree_skb(this);
+ /* wake up any process waiting for sending */
+ iucv_sock_wake_msglim(sk);
+ }
}
BUG_ON(!this);
diff --git a/net/rfkill/core.c b/net/rfkill/core.c
index 4e68ab4..79693fe 100644
--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -56,7 +56,6 @@
u32 idx;
bool registered;
- bool suspended;
bool persistent;
const struct rfkill_ops *ops;
@@ -224,7 +223,7 @@
static void rfkill_event(struct rfkill *rfkill)
{
- if (!rfkill->registered || rfkill->suspended)
+ if (!rfkill->registered)
return;
kobject_uevent(&rfkill->dev.kobj, KOBJ_CHANGE);
@@ -270,6 +269,9 @@
unsigned long flags;
int err;
+ if (unlikely(rfkill->dev.power.power_state.event & PM_EVENT_SLEEP))
+ return;
+
/*
* Some platforms (...!) generate input events which affect the
* _hard_ kill state -- whenever something tries to change the
@@ -292,9 +294,6 @@
rfkill->state |= RFKILL_BLOCK_SW_SETCALL;
spin_unlock_irqrestore(&rfkill->lock, flags);
- if (unlikely(rfkill->dev.power.power_state.event & PM_EVENT_SLEEP))
- return;
-
err = rfkill->ops->set_block(rfkill->data, blocked);
spin_lock_irqsave(&rfkill->lock, flags);
@@ -508,19 +507,32 @@
blocked = blocked || hwblock;
spin_unlock_irqrestore(&rfkill->lock, flags);
- if (!rfkill->registered) {
- rfkill->persistent = true;
- } else {
- if (prev != blocked && !hwblock)
- schedule_work(&rfkill->uevent_work);
+ if (!rfkill->registered)
+ return blocked;
- rfkill_led_trigger_event(rfkill);
- }
+ if (prev != blocked && !hwblock)
+ schedule_work(&rfkill->uevent_work);
+
+ rfkill_led_trigger_event(rfkill);
return blocked;
}
EXPORT_SYMBOL(rfkill_set_sw_state);
+void rfkill_init_sw_state(struct rfkill *rfkill, bool blocked)
+{
+ unsigned long flags;
+
+ BUG_ON(!rfkill);
+ BUG_ON(rfkill->registered);
+
+ spin_lock_irqsave(&rfkill->lock, flags);
+ __rfkill_set_sw_state(rfkill, blocked);
+ rfkill->persistent = true;
+ spin_unlock_irqrestore(&rfkill->lock, flags);
+}
+EXPORT_SYMBOL(rfkill_init_sw_state);
+
void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw)
{
unsigned long flags;
@@ -598,6 +610,15 @@
return sprintf(buf, "%d\n", rfkill->idx);
}
+static ssize_t rfkill_persistent_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct rfkill *rfkill = to_rfkill(dev);
+
+ return sprintf(buf, "%d\n", rfkill->persistent);
+}
+
static u8 user_state_from_blocked(unsigned long state)
{
if (state & RFKILL_BLOCK_HW)
@@ -656,6 +677,7 @@
__ATTR(name, S_IRUGO, rfkill_name_show, NULL),
__ATTR(type, S_IRUGO, rfkill_type_show, NULL),
__ATTR(index, S_IRUGO, rfkill_idx_show, NULL),
+ __ATTR(persistent, S_IRUGO, rfkill_persistent_show, NULL),
__ATTR(state, S_IRUGO|S_IWUSR, rfkill_state_show, rfkill_state_store),
__ATTR(claim, S_IRUGO|S_IWUSR, rfkill_claim_show, rfkill_claim_store),
__ATTR_NULL
@@ -718,8 +740,6 @@
rfkill_pause_polling(rfkill);
- rfkill->suspended = true;
-
return 0;
}
@@ -728,10 +748,10 @@
struct rfkill *rfkill = to_rfkill(dev);
bool cur;
- cur = !!(rfkill->state & RFKILL_BLOCK_SW);
- rfkill_set_block(rfkill, cur);
-
- rfkill->suspended = false;
+ if (!rfkill->persistent) {
+ cur = !!(rfkill->state & RFKILL_BLOCK_SW);
+ rfkill_set_block(rfkill, cur);
+ }
rfkill_resume_polling(rfkill);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 2416856..241bddd 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1687,13 +1687,52 @@
if (err)
goto out_rtnl;
- if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
- dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN) {
- err = -EINVAL;
+ err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], drv, ¶ms.vlan);
+ if (err)
goto out;
+
+ /* validate settings */
+ err = 0;
+
+ switch (dev->ieee80211_ptr->iftype) {
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_AP_VLAN:
+ /* disallow mesh-specific things */
+ if (params.plink_action)
+ err = -EINVAL;
+ break;
+ case NL80211_IFTYPE_STATION:
+ /* disallow everything but AUTHORIZED flag */
+ if (params.plink_action)
+ err = -EINVAL;
+ if (params.vlan)
+ err = -EINVAL;
+ if (params.supported_rates)
+ err = -EINVAL;
+ if (params.ht_capa)
+ err = -EINVAL;
+ if (params.listen_interval >= 0)
+ err = -EINVAL;
+ if (params.sta_flags_mask & ~BIT(NL80211_STA_FLAG_AUTHORIZED))
+ err = -EINVAL;
+ break;
+ case NL80211_IFTYPE_MESH_POINT:
+ /* disallow things mesh doesn't support */
+ if (params.vlan)
+ err = -EINVAL;
+ if (params.ht_capa)
+ err = -EINVAL;
+ if (params.listen_interval >= 0)
+ err = -EINVAL;
+ if (params.supported_rates)
+ err = -EINVAL;
+ if (params.sta_flags_mask)
+ err = -EINVAL;
+ break;
+ default:
+ err = -EINVAL;
}
- err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], drv, ¶ms.vlan);
if (err)
goto out;
@@ -1728,9 +1767,6 @@
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
- if (!info->attrs[NL80211_ATTR_STA_AID])
- return -EINVAL;
-
if (!info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL])
return -EINVAL;
@@ -1745,9 +1781,11 @@
params.listen_interval =
nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]);
- params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
- if (!params.aid || params.aid > IEEE80211_MAX_AID)
- return -EINVAL;
+ if (info->attrs[NL80211_ATTR_STA_AID]) {
+ params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
+ if (!params.aid || params.aid > IEEE80211_MAX_AID)
+ return -EINVAL;
+ }
if (info->attrs[NL80211_ATTR_HT_CAPABILITY])
params.ht_capa =
@@ -1762,13 +1800,39 @@
if (err)
goto out_rtnl;
- if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
- dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN) {
- err = -EINVAL;
+ err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], drv, ¶ms.vlan);
+ if (err)
goto out;
+
+ /* validate settings */
+ err = 0;
+
+ switch (dev->ieee80211_ptr->iftype) {
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_AP_VLAN:
+ /* all ok but must have AID */
+ if (!params.aid)
+ err = -EINVAL;
+ break;
+ case NL80211_IFTYPE_MESH_POINT:
+ /* disallow things mesh doesn't support */
+ if (params.vlan)
+ err = -EINVAL;
+ if (params.aid)
+ err = -EINVAL;
+ if (params.ht_capa)
+ err = -EINVAL;
+ if (params.listen_interval >= 0)
+ err = -EINVAL;
+ if (params.supported_rates)
+ err = -EINVAL;
+ if (params.sta_flags_mask)
+ err = -EINVAL;
+ break;
+ default:
+ err = -EINVAL;
}
- err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], drv, ¶ms.vlan);
if (err)
goto out;
@@ -1812,7 +1876,8 @@
goto out_rtnl;
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
- dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN) {
+ dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN &&
+ dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT) {
err = -EINVAL;
goto out;
}