[netdrvr] trim trailing whitespace: 8139*.c, epic100, forcedeth, tulip/*
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index e3dd144..5f743b9 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -227,12 +227,12 @@
SROMC0InfoLeaf = 27,
MediaBlockMask = 0x3f,
MediaCustomCSRs = (1 << 6),
-
+
/* PCIPM bits */
PM_Sleep = (1 << 31),
PM_Snooze = (1 << 30),
PM_Mask = PM_Sleep | PM_Snooze,
-
+
/* SIAStatus bits */
NWayState = (1 << 14) | (1 << 13) | (1 << 12),
NWayRestart = (1 << 12),
@@ -858,7 +858,7 @@
return;
cpu_relax();
}
-
+
printk(KERN_WARNING "%s: timeout expired stopping DMA\n", de->dev->name);
}
@@ -931,7 +931,7 @@
macmode |= FullDuplex;
else
macmode &= ~FullDuplex;
-
+
if (netif_msg_link(de)) {
printk(KERN_INFO "%s: set link %s\n"
KERN_INFO "%s: mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n"
@@ -966,9 +966,9 @@
u32 status = dr32(SIAStatus);
unsigned int carrier;
unsigned long flags;
-
+
carrier = (status & NetCxnErr) ? 0 : 1;
-
+
if (carrier) {
if (de->media_type != DE_MEDIA_AUI && (status & LinkFailStatus))
goto no_link_yet;
@@ -985,7 +985,7 @@
return;
}
- de_link_down(de);
+ de_link_down(de);
if (de->media_lock)
return;
@@ -1039,7 +1039,7 @@
return 0;
break;
}
-
+
return 1;
}
@@ -1050,9 +1050,9 @@
u32 status = dr32(SIAStatus);
unsigned int carrier;
unsigned long flags;
-
+
carrier = (status & NetCxnErr) ? 0 : 1;
-
+
if (carrier) {
if ((de->media_type == DE_MEDIA_TP_AUTO ||
de->media_type == DE_MEDIA_TP ||
@@ -1072,7 +1072,7 @@
return;
}
- de_link_down(de);
+ de_link_down(de);
/* if media type locked, don't switch media */
if (de->media_lock)
@@ -1124,7 +1124,7 @@
u32 next_states[] = { DE_MEDIA_AUI, DE_MEDIA_BNC, DE_MEDIA_TP_AUTO };
de_next_media(de, next_states, ARRAY_SIZE(next_states));
}
-
+
set_media:
spin_lock_irqsave(&de->lock, flags);
de_stop_rxtx(de);
@@ -1148,7 +1148,7 @@
mod_timer(&de->media_timer, jiffies + DE_TIMER_LINK);
return;
}
-
+
BUG_ON(!(status & LinkFail));
if (netif_carrier_ok(de->dev)) {
@@ -1227,7 +1227,7 @@
int rc;
de_adapter_wake(de);
-
+
macmode = dr32(MacMode) & ~MacModeClear;
rc = de_reset_mac(de);
@@ -1413,7 +1413,7 @@
netif_stop_queue(dev);
netif_carrier_off(dev);
spin_unlock_irqrestore(&de->lock, flags);
-
+
free_irq(dev->irq, dev);
de_free_rings(de);
@@ -1441,7 +1441,7 @@
spin_unlock_irq(&de->lock);
enable_irq(dev->irq);
-
+
/* Update the error counts. */
__de_get_stats(de);
@@ -1451,7 +1451,7 @@
de_init_rings(de);
de_init_hw(de);
-
+
netif_wake_queue(dev);
}
@@ -1459,7 +1459,7 @@
{
int i;
u32 *rbuf = (u32 *)buf;
-
+
/* read all CSRs */
for (i = 0; i < DE_NUM_REGS; i++)
rbuf[i] = dr32(i * 8);
@@ -1474,7 +1474,7 @@
ecmd->transceiver = XCVR_INTERNAL;
ecmd->phy_address = 0;
ecmd->advertising = de->media_advertise;
-
+
switch (de->media_type) {
case DE_MEDIA_AUI:
ecmd->port = PORT_AUI;
@@ -1489,7 +1489,7 @@
ecmd->speed = SPEED_10;
break;
}
-
+
if (dr32(MacMode) & FullDuplex)
ecmd->duplex = DUPLEX_FULL;
else
@@ -1529,7 +1529,7 @@
if (ecmd->autoneg == AUTONEG_ENABLE &&
(!(ecmd->advertising & ADVERTISED_Autoneg)))
return -EINVAL;
-
+
switch (ecmd->port) {
case PORT_AUI:
new_media = DE_MEDIA_AUI;
@@ -1554,22 +1554,22 @@
return -EINVAL;
break;
}
-
+
media_lock = (ecmd->autoneg == AUTONEG_ENABLE) ? 0 : 1;
-
+
if ((new_media == de->media_type) &&
(media_lock == de->media_lock) &&
(ecmd->advertising == de->media_advertise))
return 0; /* nothing to change */
-
+
de_link_down(de);
de_stop_rxtx(de);
-
+
de->media_type = new_media;
de->media_lock = media_lock;
de->media_advertise = ecmd->advertising;
de_set_media(de);
-
+
return 0;
}
@@ -1817,7 +1817,7 @@
case 0x0204: de->media_type = DE_MEDIA_TP_FD; break;
default: de->media_type = DE_MEDIA_TP_AUTO; break;
}
-
+
if (netif_msg_probe(de))
printk(KERN_INFO "de%d: SROM leaf offset %u, default media %s\n",
de->board_idx, ofs,
@@ -1886,7 +1886,7 @@
de->media[idx].csr13,
de->media[idx].csr14,
de->media[idx].csr15);
-
+
} else if (netif_msg_probe(de))
printk("\n");
@@ -2118,7 +2118,7 @@
spin_unlock_irq(&de->lock);
enable_irq(dev->irq);
-
+
/* Update the error counts. */
__de_get_stats(de);
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index f560941..da8bd0d 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -41,11 +41,11 @@
Digital Semiconductor SROM Specification. The driver currently
recognises the following chips:
- DC21040 (no SROM)
- DC21041[A]
- DC21140[A]
- DC21142
- DC21143
+ DC21040 (no SROM)
+ DC21041[A]
+ DC21140[A]
+ DC21142
+ DC21143
So far the driver is known to work with the following cards:
@@ -55,7 +55,7 @@
SMC8432
SMC9332 (w/new SROM)
ZNYX31[45]
- ZNYX346 10/100 4 port (can act as a 10/100 bridge!)
+ ZNYX346 10/100 4 port (can act as a 10/100 bridge!)
The driver has been tested on a relatively busy network using the DE425,
DE434, DE435 and DE500 cards and benchmarked with 'ttcp': it transferred
@@ -106,7 +106,7 @@
loading by:
insmod de4x5 io=0xghh where g = bus number
- hh = device number
+ hh = device number
NB: autoprobing for modules is now supported by default. You may just
use:
@@ -120,11 +120,11 @@
4) if you are wanting to add a new card, goto 5. Otherwise, recompile a
kernel with the de4x5 configuration turned off and reboot.
5) insmod de4x5 [io=0xghh]
- 6) run the net startup bits for your new eth?? interface(s) manually
- (usually /etc/rc.inet[12] at boot time).
+ 6) run the net startup bits for your new eth?? interface(s) manually
+ (usually /etc/rc.inet[12] at boot time).
7) enjoy!
- To unload a module, turn off the associated interface(s)
+ To unload a module, turn off the associated interface(s)
'ifconfig eth?? down' then 'rmmod de4x5'.
Automedia detection is included so that in principal you can disconnect
@@ -135,7 +135,7 @@
By default, the driver will now autodetect any DECchip based card.
Should you have a need to restrict the driver to DIGITAL only cards, you
can compile with a DEC_ONLY define, or if loading as a module, use the
- 'dec_only=1' parameter.
+ 'dec_only=1' parameter.
I've changed the timing routines to use the kernel timer and scheduling
functions so that the hangs and other assorted problems that occurred
@@ -204,7 +204,7 @@
following parameters are allowed:
fdx for full duplex
- autosense to set the media/speed; with the following
+ autosense to set the media/speed; with the following
sub-parameters:
TP, TP_NW, BNC, AUI, BNC_AUI, 100Mb, 10Mb, AUTO
@@ -235,14 +235,14 @@
this automatically or include #define DE4X5_FORCE_EISA on or before
line 1040 in the driver.
- TO DO:
+ TO DO:
------
Revision History
----------------
Version Date Description
-
+
0.1 17-Nov-94 Initial writing. ALPHA code release.
0.2 13-Jan-95 Added PCI support for DE435's.
0.21 19-Jan-95 Added auto media detection.
@@ -251,7 +251,7 @@
Add request/release_region code.
Add loadable modules support for PCI.
Clean up loadable modules support.
- 0.23 28-Feb-95 Added DC21041 and DC21140 support.
+ 0.23 28-Feb-95 Added DC21041 and DC21140 support.
Fix missed frame counter value and initialisation.
Fixed EISA probe.
0.24 11-Apr-95 Change delay routine to use <linux/udelay>.
@@ -280,7 +280,7 @@
Add kernel timer code (h/w is too flaky).
Add MII based PHY autosense.
Add new multicasting code.
- Add new autosense algorithms for media/mode
+ Add new autosense algorithms for media/mode
selection using kernel scheduling/timing.
Re-formatted.
Made changes suggested by <jeff@router.patch.net>:
@@ -307,10 +307,10 @@
Add Accton to the list of broken cards.
Fix TX under-run bug for non DC21140 chips.
Fix boot command probe bug in alloc_device() as
- reported by <koen.gadeyne@barco.com> and
+ reported by <koen.gadeyne@barco.com> and
<orava@nether.tky.hut.fi>.
Add cache locks to prevent a race condition as
- reported by <csd@microplex.com> and
+ reported by <csd@microplex.com> and
<baba@beckman.uiuc.edu>.
Upgraded alloc_device() code.
0.431 28-Jun-96 Fix potential bug in queue_pkt() from discussion
@@ -322,7 +322,7 @@
with a loopback packet.
0.442 9-Sep-96 Include AUI in dc21041 media printout. Bug reported
by <bhat@mundook.cs.mu.OZ.AU>
- 0.45 8-Dec-96 Include endian functions for PPC use, from work
+ 0.45 8-Dec-96 Include endian functions for PPC use, from work
by <cort@cs.nmt.edu> and <g.thomas@opengroup.org>.
0.451 28-Dec-96 Added fix to allow autoprobe for modules after
suggestion from <mjacob@feral.com>.
@@ -346,14 +346,14 @@
<paubert@iram.es>.
0.52 26-Apr-97 Some changes may not credit the right people -
a disk crash meant I lost some mail.
- Change RX interrupt routine to drop rather than
- defer packets to avoid hang reported by
+ Change RX interrupt routine to drop rather than
+ defer packets to avoid hang reported by
<g.thomas@opengroup.org>.
Fix srom_exec() to return for COMPACT and type 1
infoblocks.
Added DC21142 and DC21143 functions.
Added byte counters from <phil@tazenda.demon.co.uk>
- Added SA_INTERRUPT temporary fix from
+ Added SA_INTERRUPT temporary fix from
<mjacob@feral.com>.
0.53 12-Nov-97 Fix the *_probe() to include 'eth??' name during
module load: bug reported by
@@ -363,10 +363,10 @@
Make above search independent of BIOS device scan
direction.
Completed DC2114[23] autosense functions.
- 0.531 21-Dec-97 Fix DE500-XA 100Mb/s bug reported by
+ 0.531 21-Dec-97 Fix DE500-XA 100Mb/s bug reported by
<robin@intercore.com
Fix type1_infoblock() bug introduced in 0.53, from
- problem reports by
+ problem reports by
<parmee@postecss.ncrfran.france.ncr.com> and
<jo@ice.dillingen.baynet.de>.
Added argument list to set up each board from either
@@ -374,7 +374,7 @@
Added generic MII PHY functionality to deal with
newer PHY chips.
Fix the mess in 2.1.67.
- 0.532 5-Jan-98 Fix bug in mii_get_phy() reported by
+ 0.532 5-Jan-98 Fix bug in mii_get_phy() reported by
<redhat@cococo.net>.
Fix bug in pci_probe() for 64 bit systems reported
by <belliott@accessone.com>.
@@ -398,7 +398,7 @@
version. I hope nothing is broken...
Add TX done interrupt modification from suggestion
by <Austin.Donnelly@cl.cam.ac.uk>.
- Fix is_anc_capable() bug reported by
+ Fix is_anc_capable() bug reported by
<Austin.Donnelly@cl.cam.ac.uk>.
Fix type[13]_infoblock() bug: during MII search, PHY
lp->rst not run because lp->ibn not initialised -
@@ -413,7 +413,7 @@
Add an_exception() for old ZYNX346 and fix compile
warning on PPC & SPARC, from <ecd@skynet.be>.
Fix lastPCI to correctly work with compiled in
- kernels and modules from bug report by
+ kernels and modules from bug report by
<Zlatko.Calusic@CARNet.hr> et al.
0.542 15-Sep-98 Fix dc2114x_autoconf() to stop multiple messages
when media is unconnected.
@@ -425,7 +425,7 @@
0.544 8-May-99 Fix for buggy SROM in Motorola embedded boards using
a 21143 by <mmporter@home.com>.
Change PCI/EISA bus probing order.
- 0.545 28-Nov-99 Further Moto SROM bug fix from
+ 0.545 28-Nov-99 Further Moto SROM bug fix from
<mporter@eng.mcd.mot.com>
Remove double checking for DEBUG_RX in de4x5_dbg_rx()
from report by <geert@linux-m68k.org>
@@ -434,8 +434,8 @@
variable 'pb', on a non de4x5 PCI device, in this
case a PCI bridge (DEC chip 21152). The value of
'pb' is now only initialized if a de4x5 chip is
- present.
- <france@handhelds.org>
+ present.
+ <france@handhelds.org>
0.547 08-Nov-01 Use library crc32 functions by <Matt_Domsch@dell.com>
0.548 30-Aug-03 Big 2.6 cleanup. Ported to PCI/EISA probing and
generic DMA APIs. Fixed DE425 support on Alpha.
@@ -584,7 +584,7 @@
/*
** Allow per adapter set up. For modules this is simply a command line
-** parameter, e.g.:
+** parameter, e.g.:
** insmod de4x5 args='eth1:fdx autosense=BNC eth0:autosense=100Mb'.
**
** For a compiled in driver, place e.g.
@@ -655,7 +655,7 @@
** Memory Alignment. Each descriptor is 4 longwords long. To force a
** particular alignment on the TX descriptor, adjust DESC_SKIP_LEN and
** DESC_ALIGN. ALIGN aligns the start address of the private memory area
-** and hence the RX descriptor ring's first entry.
+** and hence the RX descriptor ring's first entry.
*/
#define DE4X5_ALIGN4 ((u_long)4 - 1) /* 1 longword align */
#define DE4X5_ALIGN8 ((u_long)8 - 1) /* 2 longword align */
@@ -1081,8 +1081,8 @@
mdelay(2); /* Wait for 2ms */\
}
-
-static int __devinit
+
+static int __devinit
de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
{
char name[DE4X5_NAME_LENGTH + 1];
@@ -1102,12 +1102,12 @@
mdelay(10);
RESET_DE4X5;
-
+
if ((inl(DE4X5_STS) & (STS_TS | STS_RS)) != 0) {
return -ENXIO; /* Hardware could not reset */
}
-
- /*
+
+ /*
** Now find out what kind of DC21040/DC21041/DC21140 board we have.
*/
lp->useSROM = FALSE;
@@ -1116,21 +1116,21 @@
} else {
EISA_signature(name, gendev);
}
-
+
if (*name == '\0') { /* Not found a board signature */
return -ENXIO;
}
-
+
dev->base_addr = iobase;
printk ("%s: %s at 0x%04lx", gendev->bus_id, name, iobase);
-
+
printk(", h/w address ");
status = get_hw_addr(dev);
for (i = 0; i < ETH_ALEN - 1; i++) { /* get the ethernet addr. */
printk("%2.2x:", dev->dev_addr[i]);
}
printk("%2.2x,\n", dev->dev_addr[i]);
-
+
if (status != 0) {
printk(" which has an Ethernet PROM CRC error.\n");
return -ENXIO;
@@ -1171,10 +1171,10 @@
}
lp->tx_ring = lp->rx_ring + NUM_RX_DESC;
-
+
/*
** Set up the RX descriptor ring (Intels)
- ** Allocate contiguous receive buffers, long word aligned (Alphas)
+ ** Allocate contiguous receive buffers, long word aligned (Alphas)
*/
#if !defined(__alpha__) && !defined(__powerpc__) && !defined(__sparc_v9__) && !defined(DE4X5_DO_MEMCPY)
for (i=0; i<NUM_RX_DESC; i++) {
@@ -1210,7 +1210,7 @@
lp->rxRingSize = NUM_RX_DESC;
lp->txRingSize = NUM_TX_DESC;
-
+
/* Write the end of list marker to the descriptor lists */
lp->rx_ring[lp->rxRingSize - 1].des1 |= cpu_to_le32(RD_RER);
lp->tx_ring[lp->txRingSize - 1].des1 |= cpu_to_le32(TD_TER);
@@ -1219,7 +1219,7 @@
outl(lp->dma_rings, DE4X5_RRBA);
outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc),
DE4X5_TRBA);
-
+
/* Initialise the IRQ mask and Enable/Disable */
lp->irq_mask = IMR_RIM | IMR_TIM | IMR_TUM | IMR_UNM;
lp->irq_en = IMR_NIM | IMR_AIM;
@@ -1252,7 +1252,7 @@
if ((lp->chipset != DC21040) && (lp->chipset != DC21041)) {
mii_get_phy(dev);
}
-
+
#ifndef __sparc_v9__
printk(" and requires IRQ%d (provided by %s).\n", dev->irq,
#else
@@ -1260,11 +1260,11 @@
#endif
((lp->bus == PCI) ? "PCI BIOS" : "EISA CNFG"));
}
-
+
if (de4x5_debug & DEBUG_VERSION) {
printk(version);
}
-
+
/* The DE4X5-specific entries in the device structure. */
SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, gendev);
@@ -1274,23 +1274,23 @@
dev->get_stats = &de4x5_get_stats;
dev->set_multicast_list = &set_multicast_list;
dev->do_ioctl = &de4x5_ioctl;
-
+
dev->mem_start = 0;
-
+
/* Fill in the generic fields of the device structure. */
if ((status = register_netdev (dev))) {
dma_free_coherent (gendev, lp->dma_size,
lp->rx_ring, lp->dma_rings);
return status;
}
-
+
/* Let the adapter sleep to save power */
yawn(dev, SLEEP);
-
+
return status;
}
-
+
static int
de4x5_open(struct net_device *dev)
{
@@ -1312,15 +1312,15 @@
*/
yawn(dev, WAKEUP);
- /*
- ** Re-initialize the DE4X5...
+ /*
+ ** Re-initialize the DE4X5...
*/
status = de4x5_init(dev);
spin_lock_init(&lp->lock);
lp->state = OPEN;
de4x5_dbg_open(dev);
-
- if (request_irq(dev->irq, (void *)de4x5_interrupt, SA_SHIRQ,
+
+ if (request_irq(dev->irq, (void *)de4x5_interrupt, SA_SHIRQ,
lp->adapter_name, dev)) {
printk("de4x5_open(): Requested IRQ%d is busy - attemping FAST/SHARE...", dev->irq);
if (request_irq(dev->irq, de4x5_interrupt, SA_INTERRUPT | SA_SHIRQ,
@@ -1340,11 +1340,11 @@
lp->interrupt = UNMASK_INTERRUPTS;
dev->trans_start = jiffies;
-
+
START_DE4X5;
-
+
de4x5_setup_intr(dev);
-
+
if (de4x5_debug & DEBUG_OPEN) {
printk("\tsts: 0x%08x\n", inl(DE4X5_STS));
printk("\tbmr: 0x%08x\n", inl(DE4X5_BMR));
@@ -1355,7 +1355,7 @@
printk("\tstrr: 0x%08x\n", inl(DE4X5_STRR));
printk("\tsigr: 0x%08x\n", inl(DE4X5_SIGR));
}
-
+
return status;
}
@@ -1369,15 +1369,15 @@
*/
static int
de4x5_init(struct net_device *dev)
-{
+{
/* Lock out other processes whilst setting up the hardware */
netif_stop_queue(dev);
-
+
de4x5_sw_reset(dev);
-
+
/* Autoconfigure the connected port */
autoconf_media(dev);
-
+
return 0;
}
@@ -1388,7 +1388,7 @@
u_long iobase = dev->base_addr;
int i, j, status = 0;
s32 bmr, omr;
-
+
/* Select the MII or SRL port now and RESET the MAC */
if (!lp->useSROM) {
if (lp->phy[lp->active].id != 0) {
@@ -1399,7 +1399,7 @@
de4x5_switch_mac_port(dev);
}
- /*
+ /*
** Set the programmable burst length to 8 longwords for all the DC21140
** Fasternet chips and 4 longwords for all others: DMA errors result
** without these values. Cache align 16 long.
@@ -1416,23 +1416,23 @@
outl(lp->dma_rings, DE4X5_RRBA);
outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc),
DE4X5_TRBA);
-
+
lp->rx_new = lp->rx_old = 0;
lp->tx_new = lp->tx_old = 0;
-
+
for (i = 0; i < lp->rxRingSize; i++) {
lp->rx_ring[i].status = cpu_to_le32(R_OWN);
}
-
+
for (i = 0; i < lp->txRingSize; i++) {
lp->tx_ring[i].status = cpu_to_le32(0);
}
-
+
barrier();
/* Build the setup frame depending on filtering mode */
SetMulticastFilter(dev);
-
+
load_packet(dev, lp->setup_frame, PERFECT_F|TD_SET|SETUP_FRAME_LEN, (struct sk_buff *)1);
outl(omr|OMR_ST, DE4X5_OMR);
@@ -1445,18 +1445,18 @@
outl(omr, DE4X5_OMR); /* Stop everything! */
if (j == 0) {
- printk("%s: Setup frame timed out, status %08x\n", dev->name,
+ printk("%s: Setup frame timed out, status %08x\n", dev->name,
inl(DE4X5_STS));
status = -EIO;
}
-
+
lp->tx_new = (++lp->tx_new) % lp->txRingSize;
lp->tx_old = lp->tx_new;
return status;
}
-/*
+/*
** Writes a socket buffer address to the next available transmit descriptor.
*/
static int
@@ -1469,9 +1469,9 @@
netif_stop_queue(dev);
if (lp->tx_enable == NO) { /* Cannot send for now */
- return -1;
+ return -1;
}
-
+
/*
** Clean out the TX ring asynchronously to interrupts - sometimes the
** interrupts are lost by delayed descriptor status updates relative to
@@ -1482,7 +1482,7 @@
spin_unlock_irqrestore(&lp->lock, flags);
/* Test if cache is already locked - requeue skb if so */
- if (test_and_set_bit(0, (void *)&lp->cache.lock) && !lp->interrupt)
+ if (test_and_set_bit(0, (void *)&lp->cache.lock) && !lp->interrupt)
return -1;
/* Transmit descriptor ring full or stale skb */
@@ -1509,10 +1509,10 @@
load_packet(dev, skb->data, TD_IC | TD_LS | TD_FS | skb->len, skb);
lp->stats.tx_bytes += skb->len;
outl(POLL_DEMAND, DE4X5_TPD);/* Start the TX */
-
+
lp->tx_new = (++lp->tx_new) % lp->txRingSize;
dev->trans_start = jiffies;
-
+
if (TX_BUFFS_AVAIL) {
netif_start_queue(dev); /* Another pkt may be queued */
}
@@ -1521,15 +1521,15 @@
}
if (skb) de4x5_putb_cache(dev, skb);
}
-
+
lp->cache.lock = 0;
return status;
}
/*
-** The DE4X5 interrupt handler.
-**
+** The DE4X5 interrupt handler.
+**
** I/O Read/Writes through intermediate PCI bridges are never 'posted',
** so that the asserted interrupt always has some real data to work with -
** if these I/O accesses are ever changed to memory accesses, ensure the
@@ -1546,7 +1546,7 @@
s32 imr, omr, sts, limit;
u_long iobase;
unsigned int handled = 0;
-
+
if (dev == NULL) {
printk ("de4x5_interrupt(): irq %d for unknown device.\n", irq);
return IRQ_NONE;
@@ -1554,35 +1554,35 @@
lp = netdev_priv(dev);
spin_lock(&lp->lock);
iobase = dev->base_addr;
-
+
DISABLE_IRQs; /* Ensure non re-entrancy */
if (test_and_set_bit(MASK_INTERRUPTS, (void*) &lp->interrupt))
printk("%s: Re-entering the interrupt handler.\n", dev->name);
synchronize_irq(dev->irq);
-
+
for (limit=0; limit<8; limit++) {
sts = inl(DE4X5_STS); /* Read IRQ status */
outl(sts, DE4X5_STS); /* Reset the board interrupts */
-
+
if (!(sts & lp->irq_mask)) break;/* All done */
handled = 1;
-
+
if (sts & (STS_RI | STS_RU)) /* Rx interrupt (packet[s] arrived) */
de4x5_rx(dev);
-
+
if (sts & (STS_TI | STS_TU)) /* Tx interrupt (packet sent) */
- de4x5_tx(dev);
-
+ de4x5_tx(dev);
+
if (sts & STS_LNF) { /* TP Link has failed */
lp->irq_mask &= ~IMR_LFM;
}
-
+
if (sts & STS_UNF) { /* Transmit underrun */
de4x5_txur(dev);
}
-
+
if (sts & STS_SE) { /* Bus Error */
STOP_DE4X5;
printk("%s: Fatal bus error occurred, sts=%#8x, device stopped.\n",
@@ -1603,7 +1603,7 @@
lp->interrupt = UNMASK_INTERRUPTS;
ENABLE_IRQs;
spin_unlock(&lp->lock);
-
+
return IRQ_RETVAL(handled);
}
@@ -1614,11 +1614,11 @@
u_long iobase = dev->base_addr;
int entry;
s32 status;
-
+
for (entry=lp->rx_new; (s32)le32_to_cpu(lp->rx_ring[entry].status)>=0;
entry=lp->rx_new) {
status = (s32)le32_to_cpu(lp->rx_ring[entry].status);
-
+
if (lp->rx_ovf) {
if (inl(DE4X5_MFC) & MFC_FOCM) {
de4x5_rx_ovfc(dev);
@@ -1629,7 +1629,7 @@
if (status & RD_FS) { /* Remember the start of frame */
lp->rx_old = entry;
}
-
+
if (status & RD_LS) { /* Valid frame status */
if (lp->tx_enable) lp->linkOK++;
if (status & RD_ES) { /* There was an error. */
@@ -1646,9 +1646,9 @@
struct sk_buff *skb;
short pkt_len = (short)(le32_to_cpu(lp->rx_ring[entry].status)
>> 16) - 4;
-
+
if ((skb = de4x5_alloc_rx_buff(dev, entry, pkt_len)) == NULL) {
- printk("%s: Insufficient memory; nuking packet.\n",
+ printk("%s: Insufficient memory; nuking packet.\n",
dev->name);
lp->stats.rx_dropped++;
} else {
@@ -1658,14 +1658,14 @@
skb->protocol=eth_type_trans(skb,dev);
de4x5_local_stats(dev, skb->data, pkt_len);
netif_rx(skb);
-
+
/* Update stats */
dev->last_rx = jiffies;
lp->stats.rx_packets++;
lp->stats.rx_bytes += pkt_len;
}
}
-
+
/* Change buffer ownership for this frame, back to the adapter */
for (;lp->rx_old!=entry;lp->rx_old=(++lp->rx_old)%lp->rxRingSize) {
lp->rx_ring[lp->rx_old].status = cpu_to_le32(R_OWN);
@@ -1674,13 +1674,13 @@
lp->rx_ring[entry].status = cpu_to_le32(R_OWN);
barrier();
}
-
+
/*
** Update entry information
*/
lp->rx_new = (++lp->rx_new) % lp->rxRingSize;
}
-
+
return 0;
}
@@ -1705,20 +1705,20 @@
u_long iobase = dev->base_addr;
int entry;
s32 status;
-
+
for (entry = lp->tx_old; entry != lp->tx_new; entry = lp->tx_old) {
status = (s32)le32_to_cpu(lp->tx_ring[entry].status);
if (status < 0) { /* Buffer not sent yet */
break;
} else if (status != 0x7fffffff) { /* Not setup frame */
if (status & TD_ES) { /* An error happened */
- lp->stats.tx_errors++;
+ lp->stats.tx_errors++;
if (status & TD_NC) lp->stats.tx_carrier_errors++;
if (status & TD_LC) lp->stats.tx_window_errors++;
if (status & TD_UF) lp->stats.tx_fifo_errors++;
if (status & TD_EC) lp->pktStats.excessive_collisions++;
if (status & TD_DE) lp->stats.tx_aborted_errors++;
-
+
if (TX_PKT_PENDING) {
outl(POLL_DEMAND, DE4X5_TPD);/* Restart a stalled TX */
}
@@ -1727,14 +1727,14 @@
if (lp->tx_enable) lp->linkOK++;
}
/* Update the collision counter */
- lp->stats.collisions += ((status & TD_EC) ? 16 :
+ lp->stats.collisions += ((status & TD_EC) ? 16 :
((status & TD_CC) >> 3));
/* Free the buffer. */
if (lp->tx_skb[entry] != NULL)
de4x5_free_tx_buff(lp, entry);
}
-
+
/* Update all the pointers */
lp->tx_old = (++lp->tx_old) % lp->txRingSize;
}
@@ -1746,7 +1746,7 @@
else
netif_start_queue(dev);
}
-
+
return 0;
}
@@ -1755,9 +1755,9 @@
{
struct de4x5_private *lp = netdev_priv(dev);
int next_tick = DE4X5_AUTOSENSE_MS;
-
+
disable_ast(dev);
-
+
if (lp->useSROM) {
next_tick = srom_autoconf(dev);
} else if (lp->chipset == DC21140) {
@@ -1769,7 +1769,7 @@
}
lp->linkOK = 0;
enable_ast(dev, next_tick);
-
+
return 0;
}
@@ -1792,11 +1792,11 @@
}
outl(omr | OMR_ST | OMR_SR, DE4X5_OMR);
}
-
+
return 0;
}
-static int
+static int
de4x5_rx_ovfc(struct net_device *dev)
{
struct de4x5_private *lp = netdev_priv(dev);
@@ -1813,7 +1813,7 @@
}
outl(omr, DE4X5_OMR);
-
+
return 0;
}
@@ -1823,22 +1823,22 @@
struct de4x5_private *lp = netdev_priv(dev);
u_long iobase = dev->base_addr;
s32 imr, omr;
-
+
disable_ast(dev);
netif_stop_queue(dev);
-
+
if (de4x5_debug & DEBUG_CLOSE) {
printk("%s: Shutting down ethercard, status was %8.8x.\n",
dev->name, inl(DE4X5_STS));
}
-
- /*
+
+ /*
** We stop the DE4X5 here... mask interrupts and stop TX & RX
*/
DISABLE_IRQs;
STOP_DE4X5;
-
+
/* Free the associated irq */
free_irq(dev->irq, dev);
lp->state = CLOSED;
@@ -1846,10 +1846,10 @@
/* Free any socket buffers */
de4x5_free_rx_buffs(dev);
de4x5_free_tx_buffs(dev);
-
+
/* Put the adapter to sleep to save power */
yawn(dev, SLEEP);
-
+
return 0;
}
@@ -1858,9 +1858,9 @@
{
struct de4x5_private *lp = netdev_priv(dev);
u_long iobase = dev->base_addr;
-
+
lp->stats.rx_missed_errors = (int)(inl(DE4X5_MFC) & (MFC_OVFL | MFC_CNTR));
-
+
return &lp->stats;
}
@@ -1886,7 +1886,7 @@
(*(s16 *)&buf[4] == *(s16 *)&dev->dev_addr[4])) {
lp->pktStats.unicast++;
}
-
+
lp->pktStats.bins[0]++; /* Duplicates stats.rx_packets */
if (lp->pktStats.bins[0] == 0) { /* Reset counters */
memset((char *)&lp->pktStats, 0, sizeof(lp->pktStats));
@@ -1937,11 +1937,11 @@
omr = inl(DE4X5_OMR);
omr |= OMR_PR;
outl(omr, DE4X5_OMR);
- } else {
+ } else {
SetMulticastFilter(dev);
- load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET |
+ load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET |
SETUP_FRAME_LEN, (struct sk_buff *)1);
-
+
lp->tx_new = (++lp->tx_new) % lp->txRingSize;
outl(POLL_DEMAND, DE4X5_TPD); /* Start the TX */
dev->trans_start = jiffies;
@@ -1969,20 +1969,20 @@
omr = inl(DE4X5_OMR);
omr &= ~(OMR_PR | OMR_PM);
pa = build_setup_frame(dev, ALL); /* Build the basic frame */
-
+
if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 14)) {
omr |= OMR_PM; /* Pass all multicasts */
} else if (lp->setup_f == HASH_PERF) { /* Hash Filtering */
for (i=0;i<dev->mc_count;i++) { /* for each address in the list */
addrs=dmi->dmi_addr;
dmi=dmi->next;
- if ((*addrs & 0x01) == 1) { /* multicast address? */
+ if ((*addrs & 0x01) == 1) { /* multicast address? */
crc = ether_crc_le(ETH_ALEN, addrs);
hashcode = crc & HASH_BITS; /* hashcode is 9 LSb of CRC */
-
+
byte = hashcode >> 3; /* bit[3-8] -> byte in filter */
bit = 1 << (hashcode & 0x07);/* bit[0-2] -> bit in byte */
-
+
byte <<= 1; /* calc offset into setup frame */
if (byte & 0x02) {
byte -= 1;
@@ -1994,14 +1994,14 @@
for (j=0; j<dev->mc_count; j++) {
addrs=dmi->dmi_addr;
dmi=dmi->next;
- for (i=0; i<ETH_ALEN; i++) {
+ for (i=0; i<ETH_ALEN; i++) {
*(pa + (i&1)) = *addrs++;
if (i & 0x01) pa += 4;
}
}
}
outl(omr, DE4X5_OMR);
-
+
return;
}
@@ -2031,18 +2031,18 @@
status = -EBUSY;
goto release_reg_1;
}
-
+
if (!(dev = alloc_etherdev (sizeof (struct de4x5_private)))) {
status = -ENOMEM;
goto release_reg_2;
}
lp = netdev_priv(dev);
-
+
cfid = (u32) inl(PCI_CFID);
lp->cfrv = (u_short) inl(PCI_CFRV);
device = (cfid >> 8) & 0x00ffff00;
vendor = (u_short) cfid;
-
+
/* Read the EISA Configuration Registers */
regval = inb(EISA_REG0) & (ER0_INTL | ER0_INTT);
#ifdef CONFIG_ALPHA
@@ -2050,7 +2050,7 @@
* care about the EISA configuration, and thus doesn't
* configure the PLX bridge properly. Oh well... Simply mimic
* the EISA config file to sort it out. */
-
+
/* EISA REG1: Assert DecChip 21040 HW Reset */
outb (ER1_IAM | 1, EISA_REG1);
mdelay (1);
@@ -2061,12 +2061,12 @@
/* EISA REG3: R/W Burst Transfer Enable */
outb (ER3_BWE | ER3_BRE, EISA_REG3);
-
+
/* 32_bit slave/master, Preempt Time=23 bclks, Unlatched Interrupt */
outb (ER0_BSW | ER0_BMW | ER0_EPT | regval, EISA_REG0);
#endif
irq = de4x5_irq[(regval >> 1) & 0x03];
-
+
if (is_DC2114x) {
device = ((lp->cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143);
}
@@ -2077,7 +2077,7 @@
outl(PCI_COMMAND_IO | PCI_COMMAND_MASTER, PCI_CFCS);
outl(0x00006000, PCI_CFLT);
outl(iobase, PCI_CBIO);
-
+
DevicePresent(dev, EISA_APROM);
dev->irq = irq;
@@ -2102,7 +2102,7 @@
dev = device->driver_data;
iobase = dev->base_addr;
-
+
unregister_netdev (dev);
free_netdev (dev);
release_region (iobase + DE4X5_EISA_IO_PORTS, DE4X5_EISA_TOTAL_SIZE);
@@ -2131,11 +2131,11 @@
/*
** This function searches the current bus (which is >0) for a DECchip with an
-** SROM, so that in multiport cards that have one SROM shared between multiple
+** SROM, so that in multiport cards that have one SROM shared between multiple
** DECchips, we can find the base SROM irrespective of the BIOS scan direction.
** For single port cards this is a time waster...
*/
-static void __devinit
+static void __devinit
srom_search(struct net_device *dev, struct pci_dev *pdev)
{
u_char pb;
@@ -2163,7 +2163,7 @@
/* Set the device number information */
lp->device = PCI_SLOT(this_dev->devfn);
lp->bus_num = pb;
-
+
/* Set the chipset information */
if (is_DC2114x) {
device = ((cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143);
@@ -2176,7 +2176,7 @@
/* Fetch the IRQ to be used */
irq = this_dev->irq;
if ((irq == 0) || (irq == 0xff) || ((int)irq == -1)) continue;
-
+
/* Check if I/O accesses are enabled */
pci_read_config_word(this_dev, PCI_COMMAND, &status);
if (!(status & PCI_COMMAND_IO)) continue;
@@ -2254,7 +2254,7 @@
lp = netdev_priv(dev);
lp->bus = PCI;
lp->bus_num = 0;
-
+
/* Search for an SROM on this bus */
if (lp->bus_num != pb) {
lp->bus_num = pb;
@@ -2267,7 +2267,7 @@
/* Set the device number information */
lp->device = dev_num;
lp->bus_num = pb;
-
+
/* Set the chipset information */
if (is_DC2114x) {
device = ((lp->cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143);
@@ -2283,7 +2283,7 @@
error = -ENODEV;
goto free_dev;
}
-
+
/* Check if I/O accesses and Bus Mastering are enabled */
pci_read_config_word(pdev, PCI_COMMAND, &status);
#ifdef __powerpc__
@@ -2322,7 +2322,7 @@
}
dev->irq = irq;
-
+
if ((error = de4x5_hw_init(dev, iobase, &pdev->dev))) {
goto release;
}
@@ -2377,7 +2377,7 @@
** Auto configure the media here rather than setting the port at compile
** time. This routine is called by de4x5_init() and when a loss of media is
** detected (excessive collisions, loss of carrier, no carrier or link fail
-** [TP] or no recent receive activity) to check whether the user has been
+** [TP] or no recent receive activity) to check whether the user has been
** sneaky and changed the port on us.
*/
static int
@@ -2405,7 +2405,7 @@
}
enable_ast(dev, next_tick);
-
+
return (lp->media);
}
@@ -2428,7 +2428,7 @@
u_long iobase = dev->base_addr;
int next_tick = DE4X5_AUTOSENSE_MS;
s32 imr;
-
+
switch (lp->media) {
case INIT:
DISABLE_IRQs;
@@ -2447,36 +2447,36 @@
lp->local_state = 0;
next_tick = dc21040_autoconf(dev);
break;
-
+
case TP:
- next_tick = dc21040_state(dev, 0x8f01, 0xffff, 0x0000, 3000, BNC_AUI,
+ next_tick = dc21040_state(dev, 0x8f01, 0xffff, 0x0000, 3000, BNC_AUI,
TP_SUSPECT, test_tp);
break;
-
+
case TP_SUSPECT:
next_tick = de4x5_suspect_state(dev, 1000, TP, test_tp, dc21040_autoconf);
break;
-
+
case BNC:
case AUI:
case BNC_AUI:
- next_tick = dc21040_state(dev, 0x8f09, 0x0705, 0x0006, 3000, EXT_SIA,
+ next_tick = dc21040_state(dev, 0x8f09, 0x0705, 0x0006, 3000, EXT_SIA,
BNC_AUI_SUSPECT, ping_media);
break;
-
+
case BNC_AUI_SUSPECT:
next_tick = de4x5_suspect_state(dev, 1000, BNC_AUI, ping_media, dc21040_autoconf);
break;
-
+
case EXT_SIA:
- next_tick = dc21040_state(dev, 0x3041, 0x0000, 0x0006, 3000,
+ next_tick = dc21040_state(dev, 0x3041, 0x0000, 0x0006, 3000,
NC, EXT_SIA_SUSPECT, ping_media);
break;
-
+
case EXT_SIA_SUSPECT:
next_tick = de4x5_suspect_state(dev, 1000, EXT_SIA, ping_media, dc21040_autoconf);
break;
-
+
case NC:
/* default to TP for all */
reset_init_sia(dev, 0x8f01, 0xffff, 0x0000);
@@ -2488,13 +2488,13 @@
lp->tx_enable = NO;
break;
}
-
+
return next_tick;
}
static int
dc21040_state(struct net_device *dev, int csr13, int csr14, int csr15, int timeout,
- int next_state, int suspect_state,
+ int next_state, int suspect_state,
int (*fn)(struct net_device *, int))
{
struct de4x5_private *lp = netdev_priv(dev);
@@ -2507,7 +2507,7 @@
lp->local_state++;
next_tick = 500;
break;
-
+
case 1:
if (!lp->tx_enable) {
linkBad = fn(dev, timeout);
@@ -2527,7 +2527,7 @@
}
break;
}
-
+
return next_tick;
}
@@ -2582,7 +2582,7 @@
u_long iobase = dev->base_addr;
s32 sts, irqs, irq_mask, imr, omr;
int next_tick = DE4X5_AUTOSENSE_MS;
-
+
switch (lp->media) {
case INIT:
DISABLE_IRQs;
@@ -2603,7 +2603,7 @@
lp->local_state = 0;
next_tick = dc21041_autoconf(dev);
break;
-
+
case TP_NW:
if (lp->timeout < 0) {
omr = inl(DE4X5_OMR);/* Set up full duplex for the autonegotiate */
@@ -2623,7 +2623,7 @@
next_tick = dc21041_autoconf(dev);
}
break;
-
+
case ANS:
if (!lp->tx_enable) {
irqs = STS_LNP;
@@ -2645,11 +2645,11 @@
next_tick = 3000;
}
break;
-
+
case ANS_SUSPECT:
next_tick = de4x5_suspect_state(dev, 1000, ANS, test_tp, dc21041_autoconf);
break;
-
+
case TP:
if (!lp->tx_enable) {
if (lp->timeout < 0) {
@@ -2679,11 +2679,11 @@
next_tick = 3000;
}
break;
-
+
case TP_SUSPECT:
next_tick = de4x5_suspect_state(dev, 1000, TP, test_tp, dc21041_autoconf);
break;
-
+
case AUI:
if (!lp->tx_enable) {
if (lp->timeout < 0) {
@@ -2709,11 +2709,11 @@
next_tick = 3000;
}
break;
-
+
case AUI_SUSPECT:
next_tick = de4x5_suspect_state(dev, 1000, AUI, ping_media, dc21041_autoconf);
break;
-
+
case BNC:
switch (lp->local_state) {
case 0:
@@ -2731,7 +2731,7 @@
next_tick = dc21041_autoconf(dev);
}
break;
-
+
case 1:
if (!lp->tx_enable) {
if ((sts = ping_media(dev, 3000)) < 0) {
@@ -2751,11 +2751,11 @@
break;
}
break;
-
+
case BNC_SUSPECT:
next_tick = de4x5_suspect_state(dev, 1000, BNC, ping_media, dc21041_autoconf);
break;
-
+
case NC:
omr = inl(DE4X5_OMR); /* Set up full duplex for the autonegotiate */
outl(omr | OMR_FDX, DE4X5_OMR);
@@ -2768,7 +2768,7 @@
lp->tx_enable = NO;
break;
}
-
+
return next_tick;
}
@@ -2784,9 +2784,9 @@
int ana, anlpa, cap, cr, slnk, sr;
int next_tick = DE4X5_AUTOSENSE_MS;
u_long imr, omr, iobase = dev->base_addr;
-
+
switch(lp->media) {
- case INIT:
+ case INIT:
if (lp->timeout < 0) {
DISABLE_IRQs;
lp->tx_enable = FALSE;
@@ -2813,7 +2813,7 @@
lp->media = _100Mb;
} else if (lp->autosense == _10Mb) {
lp->media = _10Mb;
- } else if ((lp->autosense == AUTO) &&
+ } else if ((lp->autosense == AUTO) &&
((sr=is_anc_capable(dev)) & MII_SR_ANC)) {
ana = (((sr >> 6) & MII_ANA_TAF) | MII_ANA_CSMA);
ana &= (lp->fdx ? ~0 : ~MII_ANA_FDAM);
@@ -2831,7 +2831,7 @@
next_tick = dc21140m_autoconf(dev);
}
break;
-
+
case ANS:
switch (lp->local_state) {
case 0:
@@ -2851,7 +2851,7 @@
next_tick = dc21140m_autoconf(dev);
}
break;
-
+
case 1:
if ((sr=test_mii_reg(dev, MII_SR, MII_SR_ASSC, TRUE, 2000)) < 0) {
next_tick = sr & ~TIMER_CB;
@@ -2862,7 +2862,7 @@
lp->tmp = MII_SR_ASSC;
anlpa = mii_rd(MII_ANLPA, lp->phy[lp->active].addr, DE4X5_MII);
ana = mii_rd(MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
- if (!(anlpa & MII_ANLPA_RF) &&
+ if (!(anlpa & MII_ANLPA_RF) &&
(cap = anlpa & MII_ANLPA_TAF & ana)) {
if (cap & MII_ANA_100M) {
lp->fdx = ((ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) ? TRUE : FALSE);
@@ -2879,10 +2879,10 @@
break;
}
break;
-
+
case SPD_DET: /* Choose 10Mb/s or 100Mb/s */
if (lp->timeout < 0) {
- lp->tmp = (lp->phy[lp->active].id ? MII_SR_LKS :
+ lp->tmp = (lp->phy[lp->active].id ? MII_SR_LKS :
(~gep_rd(dev) & GEP_LNP));
SET_100Mb_PDET;
}
@@ -2899,7 +2899,7 @@
next_tick = dc21140m_autoconf(dev);
}
break;
-
+
case _100Mb: /* Set 100Mb/s */
next_tick = 3000;
if (!lp->tx_enable) {
@@ -2933,7 +2933,7 @@
}
}
break;
-
+
case NC:
if (lp->media != lp->c_media) {
de4x5_dbg_media(dev);
@@ -2943,7 +2943,7 @@
lp->tx_enable = FALSE;
break;
}
-
+
return next_tick;
}
@@ -3002,7 +3002,7 @@
lp->media = AUI;
} else {
lp->media = SPD_DET;
- if ((lp->infoblock_media == ANS) &&
+ if ((lp->infoblock_media == ANS) &&
((sr=is_anc_capable(dev)) & MII_SR_ANC)) {
ana = (((sr >> 6) & MII_ANA_TAF) | MII_ANA_CSMA);
ana &= (lp->fdx ? ~0 : ~MII_ANA_FDAM);
@@ -3014,7 +3014,7 @@
next_tick = dc2114x_autoconf(dev);
}
break;
-
+
case ANS:
switch (lp->local_state) {
case 0:
@@ -3034,7 +3034,7 @@
next_tick = dc2114x_autoconf(dev);
}
break;
-
+
case 1:
if ((sr=test_mii_reg(dev, MII_SR, MII_SR_ASSC, TRUE, 2000)) < 0) {
next_tick = sr & ~TIMER_CB;
@@ -3045,7 +3045,7 @@
lp->tmp = MII_SR_ASSC;
anlpa = mii_rd(MII_ANLPA, lp->phy[lp->active].addr, DE4X5_MII);
ana = mii_rd(MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
- if (!(anlpa & MII_ANLPA_RF) &&
+ if (!(anlpa & MII_ANLPA_RF) &&
(cap = anlpa & MII_ANLPA_TAF & ana)) {
if (cap & MII_ANA_100M) {
lp->fdx = ((ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) ? TRUE : FALSE);
@@ -3087,11 +3087,11 @@
next_tick = 3000;
}
break;
-
+
case AUI_SUSPECT:
next_tick = de4x5_suspect_state(dev, 1000, AUI, ping_media, dc2114x_autoconf);
break;
-
+
case BNC:
switch (lp->local_state) {
case 0:
@@ -3109,7 +3109,7 @@
next_tick = dc2114x_autoconf(dev);
}
break;
-
+
case 1:
if (!lp->tx_enable) {
if ((sts = ping_media(dev, 3000)) < 0) {
@@ -3130,11 +3130,11 @@
break;
}
break;
-
+
case BNC_SUSPECT:
next_tick = de4x5_suspect_state(dev, 1000, BNC, ping_media, dc2114x_autoconf);
break;
-
+
case SPD_DET: /* Choose 10Mb/s or 100Mb/s */
if (srom_map_media(dev) < 0) {
lp->tcount++;
@@ -3161,7 +3161,7 @@
next_tick = dc2114x_autoconf(dev);
} else if (((lp->media == _100Mb) && is_100_up(dev)) ||
(((lp->media == _10Mb) || (lp->media == TP) ||
- (lp->media == BNC) || (lp->media == AUI)) &&
+ (lp->media == BNC) || (lp->media == AUI)) &&
is_10_up(dev))) {
next_tick = dc2114x_autoconf(dev);
} else {
@@ -3169,7 +3169,7 @@
lp->media = INIT;
}
break;
-
+
case _10Mb:
next_tick = 3000;
if (!lp->tx_enable) {
@@ -3208,7 +3208,7 @@
lp->media = INIT;
break;
}
-
+
return next_tick;
}
@@ -3231,7 +3231,7 @@
struct de4x5_private *lp = netdev_priv(dev);
lp->fdx = 0;
- if (lp->infoblock_media == lp->media)
+ if (lp->infoblock_media == lp->media)
return 0;
switch(lp->infoblock_media) {
@@ -3270,7 +3270,7 @@
case SROM_100BASEFF:
if (!lp->params.fdx) return -1;
lp->fdx = TRUE;
- case SROM_100BASEF:
+ case SROM_100BASEF:
if (lp->params.fdx && !lp->fdx) return -1;
lp->media = _100Mb;
break;
@@ -3280,8 +3280,8 @@
lp->fdx = lp->params.fdx;
break;
- default:
- printk("%s: Bad media code [%d] detected in SROM!\n", dev->name,
+ default:
+ printk("%s: Bad media code [%d] detected in SROM!\n", dev->name,
lp->infoblock_media);
return -1;
break;
@@ -3359,7 +3359,7 @@
struct de4x5_private *lp = netdev_priv(dev);
u_long iobase = dev->base_addr;
s32 sts, csr12;
-
+
if (lp->timeout < 0) {
lp->timeout = msec/100;
if (!lp->useSROM) { /* Already done if by SROM, else dc2104[01] */
@@ -3372,22 +3372,22 @@
/* clear all pending interrupts */
sts = inl(DE4X5_STS);
outl(sts, DE4X5_STS);
-
+
/* clear csr12 NRA and SRA bits */
if ((lp->chipset == DC21041) || lp->useSROM) {
csr12 = inl(DE4X5_SISR);
outl(csr12, DE4X5_SISR);
}
}
-
+
sts = inl(DE4X5_STS) & ~TIMER_CB;
-
+
if (!(sts & irqs) && --lp->timeout) {
sts = 100 | TIMER_CB;
} else {
lp->timeout = -1;
}
-
+
return sts;
}
@@ -3397,11 +3397,11 @@
struct de4x5_private *lp = netdev_priv(dev);
u_long iobase = dev->base_addr;
int sisr;
-
+
if (lp->timeout < 0) {
lp->timeout = msec/100;
}
-
+
sisr = (inl(DE4X5_SISR) & ~TIMER_CB) & (SISR_LKF | SISR_NCR);
if (sisr && --lp->timeout) {
@@ -3409,7 +3409,7 @@
} else {
lp->timeout = -1;
}
-
+
return sisr;
}
@@ -3436,7 +3436,7 @@
lp->timeout = msec/SAMPLE_INTERVAL;
}
}
-
+
if (lp->phy[lp->active].id || lp->useSROM) {
gep = is_100_up(dev) | is_spd_100(dev);
} else {
@@ -3447,7 +3447,7 @@
} else {
lp->timeout = -1;
}
-
+
return gep;
}
@@ -3459,13 +3459,13 @@
if (lp->timeout < 0) {
lp->timeout = 1;
}
-
+
if (lp->timeout--) {
return TIMER_CB;
} else {
lp->timeout = -1;
}
-
+
return 0;
}
@@ -3479,21 +3479,21 @@
struct de4x5_private *lp = netdev_priv(dev);
int test;
u_long iobase = dev->base_addr;
-
+
if (lp->timeout < 0) {
lp->timeout = msec/100;
}
-
+
if (pol) pol = ~0;
reg = mii_rd((u_char)reg, lp->phy[lp->active].addr, DE4X5_MII) & mask;
test = (reg ^ pol) & mask;
-
+
if (test && --lp->timeout) {
reg = 100 | TIMER_CB;
} else {
lp->timeout = -1;
}
-
+
return reg;
}
@@ -3503,7 +3503,7 @@
struct de4x5_private *lp = netdev_priv(dev);
u_long iobase = dev->base_addr;
int spd;
-
+
if (lp->useMII) {
spd = mii_rd(lp->phy[lp->active].spd.reg, lp->phy[lp->active].addr, DE4X5_MII);
spd = ~(spd ^ lp->phy[lp->active].spd.value);
@@ -3517,7 +3517,7 @@
spd = (lp->asBitValid & (lp->asPolarity ^ (gep_rd(dev) & lp->asBit))) |
(lp->linkOK & ~lp->asBitValid);
}
-
+
return spd;
}
@@ -3526,7 +3526,7 @@
{
struct de4x5_private *lp = netdev_priv(dev);
u_long iobase = dev->base_addr;
-
+
if (lp->useMII) {
/* Double read for sticky bits & temporary drops */
mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);
@@ -3547,7 +3547,7 @@
{
struct de4x5_private *lp = netdev_priv(dev);
u_long iobase = dev->base_addr;
-
+
if (lp->useMII) {
/* Double read for sticky bits & temporary drops */
mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);
@@ -3570,7 +3570,7 @@
{
struct de4x5_private *lp = netdev_priv(dev);
u_long iobase = dev->base_addr;
-
+
if (lp->phy[lp->active].id && (!lp->useSROM || lp->useMII)) {
return (mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII));
} else if ((lp->chipset & ~0x00ff) == DC2114x) {
@@ -3590,24 +3590,24 @@
struct de4x5_private *lp = netdev_priv(dev);
u_long iobase = dev->base_addr;
int sisr;
-
+
if (lp->timeout < 0) {
lp->timeout = msec/100;
-
+
lp->tmp = lp->tx_new; /* Remember the ring position */
load_packet(dev, lp->frame, TD_LS | TD_FS | sizeof(lp->frame), (struct sk_buff *)1);
lp->tx_new = (++lp->tx_new) % lp->txRingSize;
outl(POLL_DEMAND, DE4X5_TPD);
}
-
+
sisr = inl(DE4X5_SISR);
- if ((!(sisr & SISR_NCR)) &&
- ((s32)le32_to_cpu(lp->tx_ring[lp->tmp].status) < 0) &&
+ if ((!(sisr & SISR_NCR)) &&
+ ((s32)le32_to_cpu(lp->tx_ring[lp->tmp].status) < 0) &&
(--lp->timeout)) {
sisr = 100 | TIMER_CB;
} else {
- if ((!(sisr & SISR_NCR)) &&
+ if ((!(sisr & SISR_NCR)) &&
!(le32_to_cpu(lp->tx_ring[lp->tmp].status) & (T_OWN | TD_ES)) &&
lp->timeout) {
sisr = 0;
@@ -3616,7 +3616,7 @@
}
lp->timeout = -1;
}
-
+
return sisr;
}
@@ -3668,7 +3668,7 @@
} else { /* Linear buffer */
memcpy(skb_put(p,len),lp->rx_bufs + lp->rx_old * RX_BUFF_SZ,len);
}
-
+
return p;
#endif
}
@@ -3751,23 +3751,23 @@
outl(lp->dma_rings, DE4X5_RRBA);
outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc),
DE4X5_TRBA);
-
+
lp->rx_new = lp->rx_old = 0;
lp->tx_new = lp->tx_old = 0;
-
+
for (i = 0; i < lp->rxRingSize; i++) {
lp->rx_ring[i].status = cpu_to_le32(R_OWN);
}
-
+
for (i = 0; i < lp->txRingSize; i++) {
lp->tx_ring[i].status = cpu_to_le32(0);
}
-
+
barrier();
lp->cache.save_cnt--;
START_DE4X5;
}
-
+
return;
}
@@ -3792,7 +3792,7 @@
gep_wr(lp->cache.gepc, dev);
gep_wr(lp->cache.gep, dev);
} else {
- reset_init_sia(dev, lp->cache.csr13, lp->cache.csr14,
+ reset_init_sia(dev, lp->cache.csr13, lp->cache.csr14,
lp->cache.csr15);
}
break;
@@ -3854,25 +3854,25 @@
struct de4x5_private *lp = netdev_priv(dev);
u_long iobase = dev->base_addr;
s32 sts, ans;
-
+
if (lp->timeout < 0) {
lp->timeout = msec/100;
outl(irq_mask, DE4X5_IMR);
-
+
/* clear all pending interrupts */
sts = inl(DE4X5_STS);
outl(sts, DE4X5_STS);
}
-
+
ans = inl(DE4X5_SISR) & SISR_ANS;
sts = inl(DE4X5_STS) & ~TIMER_CB;
-
+
if (!(sts & irqs) && (ans ^ ANS_NWOK) && --lp->timeout) {
sts = 100 | TIMER_CB;
} else {
lp->timeout = -1;
}
-
+
return sts;
}
@@ -3882,7 +3882,7 @@
struct de4x5_private *lp = netdev_priv(dev);
u_long iobase = dev->base_addr;
s32 imr, sts;
-
+
if (inl(DE4X5_OMR) & OMR_SR) { /* Only unmask if TX/RX is enabled */
imr = 0;
UNMASK_IRQs;
@@ -3890,7 +3890,7 @@
outl(sts, DE4X5_STS);
ENABLE_IRQs;
}
-
+
return;
}
@@ -3936,17 +3936,17 @@
{
int i;
char *buf = frame;
-
+
for (i=0; i<ETH_ALEN; i++) { /* Use this source address */
*buf++ = dev->dev_addr[i];
}
for (i=0; i<ETH_ALEN; i++) { /* Use this destination address */
*buf++ = dev->dev_addr[i];
}
-
+
*buf++ = 0; /* Packet length (2 bytes) */
*buf++ = 1;
-
+
return;
}
@@ -3978,7 +3978,7 @@
PCI_signature(char *name, struct de4x5_private *lp)
{
int i, status = 0, siglen = sizeof(de4x5_signatures)/sizeof(c_char *);
-
+
if (lp->chipset == DC21040) {
strcpy(name, "DE434/5");
return status;
@@ -4007,7 +4007,7 @@
} else if ((lp->chipset & ~0x00ff) == DC2114x) {
lp->useSROM = TRUE;
}
-
+
return status;
}
@@ -4024,7 +4024,7 @@
{
int i, j=0;
struct de4x5_private *lp = netdev_priv(dev);
-
+
if (lp->chipset == DC21040) {
if (lp->bus == EISA) {
enet_addr_rst(aprom_addr); /* Reset Ethernet Address ROM Pointer */
@@ -4049,7 +4049,7 @@
}
de4x5_dbg_srom((struct de4x5_srom *)&lp->srom);
}
-
+
return;
}
@@ -4071,11 +4071,11 @@
short sigLength=0;
s8 data;
int i, j;
-
+
dev.llsig.a = ETH_PROM_SIG;
dev.llsig.b = ETH_PROM_SIG;
sigLength = sizeof(u32) << 1;
-
+
for (i=0,j=0;j<sigLength && i<PROBE_LENGTH+sigLength-1;i++) {
data = inb(aprom_addr);
if (dev.Sig[j] == data) { /* track signature */
@@ -4088,7 +4088,7 @@
}
}
}
-
+
return;
}
@@ -4111,7 +4111,7 @@
for (i=0,k=0,j=0;j<3;j++) {
k <<= 1;
if (k > 0xffff) k-=0xffff;
-
+
if (lp->bus == PCI) {
if (lp->chipset == DC21040) {
while ((tmp = inl(DE4X5_APROM)) < 0);
@@ -4133,11 +4133,11 @@
k += (u_short) ((tmp = inb(EISA_APROM)) << 8);
dev->dev_addr[i++] = (u_char) tmp;
}
-
+
if (k > 0xffff) k-=0xffff;
}
if (k == 0xffff) k=0;
-
+
if (lp->bus == PCI) {
if (lp->chipset == DC21040) {
while ((tmp = inl(DE4X5_APROM)) < 0);
@@ -4156,7 +4156,7 @@
srom_repair(dev, broken);
#ifdef CONFIG_PPC_MULTIPLATFORM
- /*
+ /*
** If the address starts with 00 a0, we have to bit-reverse
** each byte of the address.
*/
@@ -4245,7 +4245,7 @@
for (tmp=0,i=0; i<ETH_ALEN; i++) tmp += (u_char)dev->dev_addr[i];
if ((tmp == 0) || (tmp == 0x5fa)) {
- if ((lp->chipset == last.chipset) &&
+ if ((lp->chipset == last.chipset) &&
(lp->bus_num == last.bus) && (lp->bus_num > 0)) {
for (i=0; i<ETH_ALEN; i++) dev->dev_addr[i] = last.addr[i];
for (i=ETH_ALEN-1; i>2; --i) {
@@ -4275,7 +4275,7 @@
static int
an_exception(struct de4x5_private *lp)
{
- if ((*(u_short *)lp->srom.sub_vendor_id == 0x00c0) &&
+ if ((*(u_short *)lp->srom.sub_vendor_id == 0x00c0) &&
(*(u_short *)lp->srom.sub_system_id == 0x95e0)) {
return -1;
}
@@ -4290,11 +4290,11 @@
srom_rd(u_long addr, u_char offset)
{
sendto_srom(SROM_RD | SROM_SR, addr);
-
+
srom_latch(SROM_RD | SROM_SR | DT_CS, addr);
srom_command(SROM_RD | SROM_SR | DT_IN | DT_CS, addr);
srom_address(SROM_RD | SROM_SR | DT_CS, addr, offset);
-
+
return srom_data(SROM_RD | SROM_SR | DT_CS, addr);
}
@@ -4304,7 +4304,7 @@
sendto_srom(command, addr);
sendto_srom(command | DT_CLK, addr);
sendto_srom(command, addr);
-
+
return;
}
@@ -4314,7 +4314,7 @@
srom_latch(command, addr);
srom_latch(command, addr);
srom_latch((command & 0x0000ff00) | DT_CS, addr);
-
+
return;
}
@@ -4322,15 +4322,15 @@
srom_address(u_int command, u_long addr, u_char offset)
{
int i, a;
-
+
a = offset << 2;
for (i=0; i<6; i++, a <<= 1) {
srom_latch(command | ((a & 0x80) ? DT_IN : 0), addr);
}
udelay(1);
-
+
i = (getfrom_srom(addr) >> 3) & 0x01;
-
+
return;
}
@@ -4340,17 +4340,17 @@
int i;
short word = 0;
s32 tmp;
-
+
for (i=0; i<16; i++) {
sendto_srom(command | DT_CLK, addr);
tmp = getfrom_srom(addr);
sendto_srom(command, addr);
-
+
word = (word << 1) | ((tmp >> 3) & 0x01);
}
-
+
sendto_srom(command & 0x0000ff00, addr);
-
+
return word;
}
@@ -4359,13 +4359,13 @@
srom_busy(u_int command, u_long addr)
{
sendto_srom((command & 0x0000ff00) | DT_CS, addr);
-
+
while (!((getfrom_srom(addr) >> 3) & 0x01)) {
mdelay(1);
}
-
+
sendto_srom(command & 0x0000ff00, addr);
-
+
return;
}
*/
@@ -4375,7 +4375,7 @@
{
outl(command, addr);
udelay(1);
-
+
return;
}
@@ -4383,10 +4383,10 @@
getfrom_srom(u_long addr)
{
s32 tmp;
-
+
tmp = inl(addr);
udelay(1);
-
+
return tmp;
}
@@ -4403,7 +4403,7 @@
}
if (i == INFOLEAF_SIZE) {
lp->useSROM = FALSE;
- printk("%s: Cannot find correct chipset for SROM decoding!\n",
+ printk("%s: Cannot find correct chipset for SROM decoding!\n",
dev->name);
return -ENXIO;
}
@@ -4420,7 +4420,7 @@
}
if (i == 0) {
lp->useSROM = FALSE;
- printk("%s: Cannot find correct PCI device [%d] for SROM decoding!\n",
+ printk("%s: Cannot find correct PCI device [%d] for SROM decoding!\n",
dev->name, lp->device);
return -ENXIO;
}
@@ -4494,9 +4494,9 @@
if (((lp->ibn != 1) && (lp->ibn != 3) && (lp->ibn != 5)) || !count) return;
if (lp->chipset != DC21140) RESET_SIA;
-
+
while (count--) {
- gep_wr(((lp->chipset==DC21140) && (lp->ibn!=5) ?
+ gep_wr(((lp->chipset==DC21140) && (lp->ibn!=5) ?
*p++ : TWIDDLE(w++)), dev);
mdelay(2); /* 2ms per action */
}
@@ -4514,13 +4514,13 @@
** unless I implement the DC21041 SROM functions. There's no need
** since the existing code will be satisfactory for all boards.
*/
-static int
+static int
dc21041_infoleaf(struct net_device *dev)
{
return DE4X5_AUTOSENSE_MS;
}
-static int
+static int
dc21140_infoleaf(struct net_device *dev)
{
struct de4x5_private *lp = netdev_priv(dev);
@@ -4558,7 +4558,7 @@
return next_tick & ~TIMER_CB;
}
-static int
+static int
dc21142_infoleaf(struct net_device *dev)
{
struct de4x5_private *lp = netdev_priv(dev);
@@ -4593,7 +4593,7 @@
return next_tick & ~TIMER_CB;
}
-static int
+static int
dc21143_infoleaf(struct net_device *dev)
{
struct de4x5_private *lp = netdev_priv(dev);
@@ -4631,7 +4631,7 @@
** The compact infoblock is only designed for DC21140[A] chips, so
** we'll reuse the dc21140m_autoconf function. Non MII media only.
*/
-static int
+static int
compact_infoblock(struct net_device *dev, u_char count, u_char *p)
{
struct de4x5_private *lp = netdev_priv(dev);
@@ -4671,7 +4671,7 @@
/*
** This block describes non MII media for the DC21140[A] only.
*/
-static int
+static int
type0_infoblock(struct net_device *dev, u_char count, u_char *p)
{
struct de4x5_private *lp = netdev_priv(dev);
@@ -4711,7 +4711,7 @@
/* These functions are under construction! */
-static int
+static int
type1_infoblock(struct net_device *dev, u_char count, u_char *p)
{
struct de4x5_private *lp = netdev_priv(dev);
@@ -4750,7 +4750,7 @@
return dc21140m_autoconf(dev);
}
-static int
+static int
type2_infoblock(struct net_device *dev, u_char count, u_char *p)
{
struct de4x5_private *lp = netdev_priv(dev);
@@ -4791,7 +4791,7 @@
return dc2114x_autoconf(dev);
}
-static int
+static int
type3_infoblock(struct net_device *dev, u_char count, u_char *p)
{
struct de4x5_private *lp = netdev_priv(dev);
@@ -4833,7 +4833,7 @@
return dc2114x_autoconf(dev);
}
-static int
+static int
type4_infoblock(struct net_device *dev, u_char count, u_char *p)
{
struct de4x5_private *lp = netdev_priv(dev);
@@ -4878,7 +4878,7 @@
** This block type provides information for resetting external devices
** (chips) through the General Purpose Register.
*/
-static int
+static int
type5_infoblock(struct net_device *dev, u_char count, u_char *p)
{
struct de4x5_private *lp = netdev_priv(dev);
@@ -4916,7 +4916,7 @@
mii_address(phyaddr, ioaddr); /* PHY address to be accessed */
mii_address(phyreg, ioaddr); /* PHY Register to read */
mii_ta(MII_STRD, ioaddr); /* Turn around time - 2 MDC */
-
+
return mii_rdata(ioaddr); /* Read data */
}
@@ -4931,7 +4931,7 @@
mii_ta(MII_STWR, ioaddr); /* Turn around time - 2 MDC */
data = mii_swap(data, 16); /* Swap data bit ordering */
mii_wdata(data, 16, ioaddr); /* Write data */
-
+
return;
}
@@ -4940,12 +4940,12 @@
{
int i;
s32 tmp = 0;
-
+
for (i=0; i<16; i++) {
tmp <<= 1;
tmp |= getfrom_mii(MII_MRD | MII_RD, ioaddr);
}
-
+
return tmp;
}
@@ -4953,12 +4953,12 @@
mii_wdata(int data, int len, u_long ioaddr)
{
int i;
-
+
for (i=0; i<len; i++) {
sendto_mii(MII_MWR | MII_WR, data, ioaddr);
data >>= 1;
}
-
+
return;
}
@@ -4966,13 +4966,13 @@
mii_address(u_char addr, u_long ioaddr)
{
int i;
-
+
addr = mii_swap(addr, 5);
for (i=0; i<5; i++) {
sendto_mii(MII_MWR | MII_WR, addr, ioaddr);
addr >>= 1;
}
-
+
return;
}
@@ -4980,12 +4980,12 @@
mii_ta(u_long rw, u_long ioaddr)
{
if (rw == MII_STWR) {
- sendto_mii(MII_MWR | MII_WR, 1, ioaddr);
- sendto_mii(MII_MWR | MII_WR, 0, ioaddr);
+ sendto_mii(MII_MWR | MII_WR, 1, ioaddr);
+ sendto_mii(MII_MWR | MII_WR, 0, ioaddr);
} else {
getfrom_mii(MII_MRD | MII_RD, ioaddr); /* Tri-state MDIO */
}
-
+
return;
}
@@ -4993,13 +4993,13 @@
mii_swap(int data, int len)
{
int i, tmp = 0;
-
+
for (i=0; i<len; i++) {
tmp <<= 1;
tmp |= (data & 1);
data >>= 1;
}
-
+
return tmp;
}
@@ -5007,13 +5007,13 @@
sendto_mii(u32 command, int data, u_long ioaddr)
{
u32 j;
-
+
j = (data & 1) << 17;
outl(command | j, ioaddr);
udelay(1);
outl(command | MII_MDC | j, ioaddr);
udelay(1);
-
+
return;
}
@@ -5024,7 +5024,7 @@
udelay(1);
outl(command | MII_MDC, ioaddr);
udelay(1);
-
+
return ((inl(ioaddr) >> 19) & 1);
}
@@ -5085,7 +5085,7 @@
u_long iobase = dev->base_addr;
int i, j, k, n, limit=sizeof(phy_info)/sizeof(struct phy_table);
int id;
-
+
lp->active = 0;
lp->useMII = TRUE;
@@ -5094,7 +5094,7 @@
lp->phy[lp->active].addr = i;
if (i==0) n++; /* Count cycles */
while (de4x5_reset_phy(dev)<0) udelay(100);/* Wait for reset */
- id = mii_get_oui(i, DE4X5_MII);
+ id = mii_get_oui(i, DE4X5_MII);
if ((id == 0) || (id == 65535)) continue; /* Valid ID? */
for (j=0; j<limit; j++) { /* Search PHY table */
if (id != phy_info[j].id) continue; /* ID match? */
@@ -5133,7 +5133,7 @@
for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++) { /*For each PHY*/
mii_wr(MII_CR_RST, MII_CR, lp->phy[k].addr, DE4X5_MII);
while (mii_rd(MII_CR, lp->phy[k].addr, DE4X5_MII) & MII_CR_RST);
-
+
de4x5_dbg_mii(dev, k);
}
}
@@ -5148,12 +5148,12 @@
struct de4x5_private *lp = netdev_priv(dev);
int i;
char *pa = lp->setup_frame;
-
+
/* Initialise the setup frame */
if (mode == ALL) {
memset(lp->setup_frame, 0, SETUP_FRAME_LEN);
}
-
+
if (lp->setup_f == HASH_PERF) {
for (pa=lp->setup_frame+IMPERF_PA_OFFSET, i=0; i<ETH_ALEN; i++) {
*(pa + i) = dev->dev_addr[i]; /* Host address */
@@ -5170,7 +5170,7 @@
if (i & 0x01) pa += 4;
}
}
-
+
return pa; /* Points to the next entry */
}
@@ -5178,7 +5178,7 @@
enable_ast(struct net_device *dev, u32 time_out)
{
timeout(dev, (void *)&de4x5_ast, (u_long)dev, time_out);
-
+
return;
}
@@ -5186,9 +5186,9 @@
disable_ast(struct net_device *dev)
{
struct de4x5_private *lp = netdev_priv(dev);
-
+
del_timer(&lp->timer);
-
+
return;
}
@@ -5207,10 +5207,10 @@
omr |= lp->infoblock_csr6;
if (omr & OMR_PS) omr |= OMR_HBD;
outl(omr, DE4X5_OMR);
-
+
/* Soft Reset */
RESET_DE4X5;
-
+
/* Restore the GEP - especially for COMPACT and Type 0 Infoblocks */
if (lp->chipset == DC21140) {
gep_wr(lp->cache.gepc, dev);
@@ -5263,21 +5263,21 @@
{
struct de4x5_private *lp = netdev_priv(dev);
int dt;
-
+
/* First, cancel any pending timer events */
del_timer(&lp->timer);
-
+
/* Convert msec to ticks */
dt = (msec * HZ) / 1000;
if (dt==0) dt=1;
-
+
/* Set up timer */
init_timer(&lp->timer);
lp->timer.expires = jiffies + dt;
lp->timer.function = fn;
lp->timer.data = data;
add_timer(&lp->timer);
-
+
return;
}
@@ -5375,7 +5375,7 @@
{
struct de4x5_private *lp = netdev_priv(dev);
int i;
-
+
if (de4x5_debug & DEBUG_OPEN) {
printk("%s: de4x5 opening with irq %d\n",dev->name,dev->irq);
printk("\tphysical address: ");
@@ -5413,11 +5413,11 @@
}
}
printk("...0x%8.8x\n", le32_to_cpu(lp->tx_ring[i].buf));
- printk("Ring size: \nRX: %d\nTX: %d\n",
- (short)lp->rxRingSize,
- (short)lp->txRingSize);
+ printk("Ring size: \nRX: %d\nTX: %d\n",
+ (short)lp->rxRingSize,
+ (short)lp->txRingSize);
}
-
+
return;
}
@@ -5426,7 +5426,7 @@
{
struct de4x5_private *lp = netdev_priv(dev);
u_long iobase = dev->base_addr;
-
+
if (de4x5_debug & DEBUG_MII) {
printk("\nMII device address: %d\n", lp->phy[k].addr);
printk("MII CR: %x\n",mii_rd(MII_CR,lp->phy[k].addr,DE4X5_MII));
@@ -5445,7 +5445,7 @@
printk("MII 20: %x\n",mii_rd(0x14,lp->phy[k].addr,DE4X5_MII));
}
}
-
+
return;
}
@@ -5453,17 +5453,17 @@
de4x5_dbg_media(struct net_device *dev)
{
struct de4x5_private *lp = netdev_priv(dev);
-
+
if (lp->media != lp->c_media) {
if (de4x5_debug & DEBUG_MEDIA) {
printk("%s: media is %s%s\n", dev->name,
(lp->media == NC ? "unconnected, link down or incompatible connection" :
(lp->media == TP ? "TP" :
(lp->media == ANS ? "TP/Nway" :
- (lp->media == BNC ? "BNC" :
- (lp->media == AUI ? "AUI" :
- (lp->media == BNC_AUI ? "BNC/AUI" :
- (lp->media == EXT_SIA ? "EXT SIA" :
+ (lp->media == BNC ? "BNC" :
+ (lp->media == AUI ? "AUI" :
+ (lp->media == BNC_AUI ? "BNC/AUI" :
+ (lp->media == EXT_SIA ? "EXT SIA" :
(lp->media == _100Mb ? "100Mb/s" :
(lp->media == _10Mb ? "10Mb/s" :
"???"
@@ -5471,7 +5471,7 @@
}
lp->c_media = lp->media;
}
-
+
return;
}
@@ -5554,7 +5554,7 @@
u32 lval[36];
} tmp;
u_long flags = 0;
-
+
switch(ioc->cmd) {
case DE4X5_GET_HWADDR: /* Get the hardware address */
ioc->len = ETH_ALEN;
@@ -5575,7 +5575,7 @@
}
build_setup_frame(dev, PHYS_ADDR_ONLY);
/* Set up the descriptor and give ownership to the card */
- load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET |
+ load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET |
SETUP_FRAME_LEN, (struct sk_buff *)1);
lp->tx_new = (++lp->tx_new) % lp->txRingSize;
outl(POLL_DEMAND, DE4X5_TPD); /* Start the TX */
@@ -5617,8 +5617,8 @@
spin_lock_irqsave(&lp->lock, flags);
memcpy(&statbuf, &lp->pktStats, ioc->len);
spin_unlock_irqrestore(&lp->lock, flags);
- if (copy_to_user(ioc->data, &statbuf, ioc->len))
- return -EFAULT;
+ if (copy_to_user(ioc->data, &statbuf, ioc->len))
+ return -EFAULT;
break;
}
case DE4X5_CLR_STATS: /* Zero out the driver statistics */
@@ -5652,9 +5652,9 @@
ioc->len = j;
if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT;
break;
-
+
#define DE4X5_DUMP 0x0f /* Dump the DE4X5 Status */
-/*
+/*
case DE4X5_DUMP:
j = 0;
tmp.addr[j++] = dev->irq;
@@ -5664,7 +5664,7 @@
tmp.addr[j++] = lp->rxRingSize;
tmp.lval[j>>2] = (long)lp->rx_ring; j+=4;
tmp.lval[j>>2] = (long)lp->tx_ring; j+=4;
-
+
for (i=0;i<lp->rxRingSize-1;i++){
if (i < 3) {
tmp.lval[j>>2] = (long)&lp->rx_ring[i].status; j+=4;
@@ -5677,7 +5677,7 @@
}
}
tmp.lval[j>>2] = (long)&lp->tx_ring[i].status; j+=4;
-
+
for (i=0;i<lp->rxRingSize-1;i++){
if (i < 3) {
tmp.lval[j>>2] = (s32)le32_to_cpu(lp->rx_ring[i].buf); j+=4;
@@ -5690,14 +5690,14 @@
}
}
tmp.lval[j>>2] = (s32)le32_to_cpu(lp->tx_ring[i].buf); j+=4;
-
+
for (i=0;i<lp->rxRingSize;i++){
tmp.lval[j>>2] = le32_to_cpu(lp->rx_ring[i].status); j+=4;
}
for (i=0;i<lp->txRingSize;i++){
tmp.lval[j>>2] = le32_to_cpu(lp->tx_ring[i].status); j+=4;
}
-
+
tmp.lval[j>>2] = inl(DE4X5_BMR); j+=4;
tmp.lval[j>>2] = inl(DE4X5_TPD); j+=4;
tmp.lval[j>>2] = inl(DE4X5_RPD); j+=4;
@@ -5706,18 +5706,18 @@
tmp.lval[j>>2] = inl(DE4X5_STS); j+=4;
tmp.lval[j>>2] = inl(DE4X5_OMR); j+=4;
tmp.lval[j>>2] = inl(DE4X5_IMR); j+=4;
- tmp.lval[j>>2] = lp->chipset; j+=4;
+ tmp.lval[j>>2] = lp->chipset; j+=4;
if (lp->chipset == DC21140) {
tmp.lval[j>>2] = gep_rd(dev); j+=4;
} else {
tmp.lval[j>>2] = inl(DE4X5_SISR); j+=4;
tmp.lval[j>>2] = inl(DE4X5_SICR); j+=4;
tmp.lval[j>>2] = inl(DE4X5_STRR); j+=4;
- tmp.lval[j>>2] = inl(DE4X5_SIGR); j+=4;
+ tmp.lval[j>>2] = inl(DE4X5_SIGR); j+=4;
}
- tmp.lval[j>>2] = lp->phy[lp->active].id; j+=4;
+ tmp.lval[j>>2] = lp->phy[lp->active].id; j+=4;
if (lp->phy[lp->active].id && (!lp->useSROM || lp->useMII)) {
- tmp.lval[j>>2] = lp->active; j+=4;
+ tmp.lval[j>>2] = lp->active; j+=4;
tmp.lval[j>>2]=mii_rd(MII_CR,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
tmp.lval[j>>2]=mii_rd(MII_SR,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
tmp.lval[j>>2]=mii_rd(MII_ID0,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
@@ -5734,10 +5734,10 @@
tmp.lval[j>>2]=mii_rd(0x14,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
}
}
-
+
tmp.addr[j++] = lp->txRingSize;
tmp.addr[j++] = netif_queue_stopped(dev);
-
+
ioc->len = j;
if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT;
break;
@@ -5746,7 +5746,7 @@
default:
return -EOPNOTSUPP;
}
-
+
return status;
}
diff --git a/drivers/net/tulip/de4x5.h b/drivers/net/tulip/de4x5.h
index ad37a40..57226e5 100644
--- a/drivers/net/tulip/de4x5.h
+++ b/drivers/net/tulip/de4x5.h
@@ -38,11 +38,11 @@
/*
** EISA Register Address Map
*/
-#define EISA_ID iobase+0x0c80 /* EISA ID Registers */
-#define EISA_ID0 iobase+0x0c80 /* EISA ID Register 0 */
-#define EISA_ID1 iobase+0x0c81 /* EISA ID Register 1 */
-#define EISA_ID2 iobase+0x0c82 /* EISA ID Register 2 */
-#define EISA_ID3 iobase+0x0c83 /* EISA ID Register 3 */
+#define EISA_ID iobase+0x0c80 /* EISA ID Registers */
+#define EISA_ID0 iobase+0x0c80 /* EISA ID Register 0 */
+#define EISA_ID1 iobase+0x0c81 /* EISA ID Register 1 */
+#define EISA_ID2 iobase+0x0c82 /* EISA ID Register 2 */
+#define EISA_ID3 iobase+0x0c83 /* EISA ID Register 3 */
#define EISA_CR iobase+0x0c84 /* EISA Control Register */
#define EISA_REG0 iobase+0x0c88 /* EISA Configuration Register 0 */
#define EISA_REG1 iobase+0x0c89 /* EISA Configuration Register 1 */
@@ -1008,8 +1008,8 @@
unsigned char __user *data; /* Pointer to the data buffer */
};
-/*
-** Recognised commands for the driver
+/*
+** Recognised commands for the driver
*/
#define DE4X5_GET_HWADDR 0x01 /* Get the hardware address */
#define DE4X5_SET_HWADDR 0x02 /* Set the hardware address */
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 74e9075..ba5b112 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -50,7 +50,7 @@
forget to unmap PCI mapped skbs.
Alan Cox <alan@redhat.com>
- Added new PCI identifiers provided by Clear Zhang at ALi
+ Added new PCI identifiers provided by Clear Zhang at ALi
for their 1563 ethernet device.
TODO
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index fbd9ab6..5ffbd5b 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -96,11 +96,11 @@
* tulip_build_fake_mediatable - Build a fake mediatable entry.
* @tp: Ptr to the tulip private data.
*
- * Some cards like the 3x5 HSC cards (J3514A) do not have a standard
+ * Some cards like the 3x5 HSC cards (J3514A) do not have a standard
* srom and can not be handled under the fixup routine. These cards
- * still need a valid mediatable entry for correct csr12 setup and
+ * still need a valid mediatable entry for correct csr12 setup and
* mii handling.
- *
+ *
* Since this is currently a parisc-linux specific function, the
* #ifdef __hppa__ should completely optimize this function away for
* non-parisc hardware.
@@ -140,7 +140,7 @@
tp->flags |= HAS_PHY_IRQ;
tp->csr12_shadow = -1;
}
-#endif
+#endif
}
void __devinit tulip_parse_eeprom(struct net_device *dev)
diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c
index bb35581..da4f759 100644
--- a/drivers/net/tulip/interrupt.c
+++ b/drivers/net/tulip/interrupt.c
@@ -139,22 +139,22 @@
}
/* Acknowledge current RX interrupt sources. */
iowrite32((RxIntr | RxNoBuf), tp->base_addr + CSR5);
-
-
+
+
/* If we own the next entry, it is a new packet. Send it up. */
while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) {
s32 status = le32_to_cpu(tp->rx_ring[entry].status);
-
-
+
+
if (tp->dirty_rx + RX_RING_SIZE == tp->cur_rx)
break;
-
+
if (tulip_debug > 5)
printk(KERN_DEBUG "%s: In tulip_rx(), entry %d %8.8x.\n",
dev->name, entry, status);
if (--rx_work_limit < 0)
goto not_done;
-
+
if ((status & 0x38008300) != 0x0300) {
if ((status & 0x38000300) != 0x0300) {
/* Ingore earlier buffers. */
@@ -180,7 +180,7 @@
/* Omit the four octet CRC from the length. */
short pkt_len = ((status >> 16) & 0x7ff) - 4;
struct sk_buff *skb;
-
+
#ifndef final_version
if (pkt_len > 1518) {
printk(KERN_WARNING "%s: Bogus packet size of %d (%#x).\n",
@@ -213,7 +213,7 @@
} else { /* Pass up the skb already on the Rx ring. */
char *temp = skb_put(skb = tp->rx_buffers[entry].skb,
pkt_len);
-
+
#ifndef final_version
if (tp->rx_buffers[entry].mapping !=
le32_to_cpu(tp->rx_ring[entry].buffer1)) {
@@ -225,17 +225,17 @@
skb->head, temp);
}
#endif
-
+
pci_unmap_single(tp->pdev, tp->rx_buffers[entry].mapping,
PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
-
+
tp->rx_buffers[entry].skb = NULL;
tp->rx_buffers[entry].mapping = 0;
}
skb->protocol = eth_type_trans(skb, dev);
-
+
netif_receive_skb(skb);
-
+
dev->last_rx = jiffies;
tp->stats.rx_packets++;
tp->stats.rx_bytes += pkt_len;
@@ -245,12 +245,12 @@
entry = (++tp->cur_rx) % RX_RING_SIZE;
if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/4)
tulip_refill_rx(dev);
-
+
}
-
+
/* New ack strategy... irq does not ack Rx any longer
hopefully this helps */
-
+
/* Really bad things can happen here... If new packet arrives
* and an irq arrives (tx or just due to occasionally unset
* mask), it will be acked by irq handler, but new thread
@@ -259,28 +259,28 @@
* tomorrow (night 011029). If it will not fail, we won
* finally: amount of IO did not increase at all. */
} while ((ioread32(tp->base_addr + CSR5) & RxIntr));
-
+
done:
-
+
#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
-
+
/* We use this simplistic scheme for IM. It's proven by
real life installations. We can have IM enabled
- continuesly but this would cause unnecessary latency.
- Unfortunely we can't use all the NET_RX_* feedback here.
- This would turn on IM for devices that is not contributing
- to backlog congestion with unnecessary latency.
-
+ continuesly but this would cause unnecessary latency.
+ Unfortunely we can't use all the NET_RX_* feedback here.
+ This would turn on IM for devices that is not contributing
+ to backlog congestion with unnecessary latency.
+
We monitor the the device RX-ring and have:
-
+
HW Interrupt Mitigation either ON or OFF.
-
- ON: More then 1 pkt received (per intr.) OR we are dropping
+
+ ON: More then 1 pkt received (per intr.) OR we are dropping
OFF: Only 1 pkt received
-
+
Note. We only use min and max (0, 15) settings from mit_table */
-
-
+
+
if( tp->flags & HAS_INTR_MITIGATION) {
if( received > 1 ) {
if( ! tp->mit_on ) {
@@ -297,20 +297,20 @@
}
#endif /* CONFIG_TULIP_NAPI_HW_MITIGATION */
-
+
dev->quota -= received;
*budget -= received;
-
+
tulip_refill_rx(dev);
-
+
/* If RX ring is not full we are out of memory. */
if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL) goto oom;
-
+
/* Remove us from polling list and enable RX intr. */
-
+
netif_rx_complete(dev);
iowrite32(tulip_tbl[tp->chip_id].valid_intrs, tp->base_addr+CSR7);
-
+
/* The last op happens after poll completion. Which means the following:
* 1. it can race with disabling irqs in irq handler
* 2. it can race with dise/enabling irqs in other poll threads
@@ -321,9 +321,9 @@
* due to races in masking and due to too late acking of already
* processed irqs. But it must not result in losing events.
*/
-
+
return 0;
-
+
not_done:
if (!received) {
@@ -331,29 +331,29 @@
}
dev->quota -= received;
*budget -= received;
-
+
if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/2 ||
tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
tulip_refill_rx(dev);
-
+
if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL) goto oom;
-
+
return 1;
-
-
+
+
oom: /* Executed with RX ints disabled */
-
-
+
+
/* Start timer, stop polling, but do not enable rx interrupts. */
mod_timer(&tp->oom_timer, jiffies+1);
-
+
/* Think: timer_pending() was an explicit signature of bug.
* Timer can be pending now but fired and completed
* before we did netif_rx_complete(). See? We would lose it. */
-
+
/* remove ourselves from the polling list */
netif_rx_complete(dev);
-
+
return 0;
}
@@ -521,9 +521,9 @@
/* Let's see whether the interrupt really is for us */
csr5 = ioread32(ioaddr + CSR5);
- if (tp->flags & HAS_PHY_IRQ)
+ if (tp->flags & HAS_PHY_IRQ)
handled = phy_interrupt (dev);
-
+
if ((csr5 & (NormalIntr|AbnormalIntr)) == 0)
return IRQ_RETVAL(handled);
@@ -538,17 +538,17 @@
/* Mask RX intrs and add the device to poll list. */
iowrite32(tulip_tbl[tp->chip_id].valid_intrs&~RxPollInt, ioaddr + CSR7);
netif_rx_schedule(dev);
-
+
if (!(csr5&~(AbnormalIntr|NormalIntr|RxPollInt|TPLnkPass)))
break;
}
-
+
/* Acknowledge the interrupt sources we handle here ASAP
the poll function does Rx and RxNoBuf acking */
-
+
iowrite32(csr5 & 0x0001ff3f, ioaddr + CSR5);
-#else
+#else
/* Acknowledge all of the current interrupt sources ASAP. */
iowrite32(csr5 & 0x0001ffff, ioaddr + CSR5);
@@ -559,11 +559,11 @@
}
#endif /* CONFIG_TULIP_NAPI */
-
+
if (tulip_debug > 4)
printk(KERN_DEBUG "%s: interrupt csr5=%#8.8x new csr5=%#8.8x.\n",
dev->name, csr5, ioread32(ioaddr + CSR5));
-
+
if (csr5 & (TxNoBuf | TxDied | TxIntr | TimerInt)) {
unsigned int dirty_tx;
@@ -737,17 +737,17 @@
#ifdef CONFIG_TULIP_NAPI
if (rxd)
csr5 &= ~RxPollInt;
- } while ((csr5 & (TxNoBuf |
- TxDied |
- TxIntr |
+ } while ((csr5 & (TxNoBuf |
+ TxDied |
+ TxIntr |
TimerInt |
/* Abnormal intr. */
- RxDied |
- TxFIFOUnderflow |
- TxJabber |
- TPLnkFail |
+ RxDied |
+ TxFIFOUnderflow |
+ TxJabber |
+ TPLnkFail |
SytemError )) != 0);
-#else
+#else
} while ((csr5 & (NormalIntr|AbnormalIntr)) != 0);
tulip_refill_rx(dev);
diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c
index f53396f..e9bc2a9 100644
--- a/drivers/net/tulip/media.c
+++ b/drivers/net/tulip/media.c
@@ -140,7 +140,7 @@
spin_unlock_irqrestore(&tp->mii_lock, flags);
return;
}
-
+
/* Establish sync by sending 32 logic ones. */
for (i = 32; i >= 0; i--) {
iowrite32(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr);
diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h
index 05d2d96..d25020d 100644
--- a/drivers/net/tulip/tulip.h
+++ b/drivers/net/tulip/tulip.h
@@ -259,7 +259,7 @@
There are no ill effects from too-large receive rings. */
#define TX_RING_SIZE 32
-#define RX_RING_SIZE 128
+#define RX_RING_SIZE 128
#define MEDIA_MASK 31
#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer. */
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index c67c912..b3cf11d 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -1224,7 +1224,7 @@
* Chips that have the MRM/reserved bit quirk and the burst quirk. That
* is the DM910X and the on chip ULi devices
*/
-
+
static int tulip_uli_dm_quirk(struct pci_dev *pdev)
{
if (pdev->vendor == 0x1282 && pdev->device == 0x9102)
@@ -1297,7 +1297,7 @@
*/
/* 1. Intel Saturn. Switch to 8 long words burst, 8 long word cache
- aligned. Aries might need this too. The Saturn errata are not
+ aligned. Aries might need this too. The Saturn errata are not
pretty reading but thankfully it's an old 486 chipset.
2. The dreaded SiS496 486 chipset. Same workaround as Intel
@@ -1500,7 +1500,7 @@
}
#endif
#ifdef CONFIG_MIPS_COBALT
- if ((pdev->bus->number == 0) &&
+ if ((pdev->bus->number == 0) &&
((PCI_SLOT(pdev->devfn) == 7) ||
(PCI_SLOT(pdev->devfn) == 12))) {
/* Cobalt MAC address in first EEPROM locations. */
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index 238e9c7..8b3a28f 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -9,7 +9,7 @@
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
+
*/
#define DRV_NAME "uli526x"
@@ -185,7 +185,7 @@
/* NIC SROM data */
unsigned char srom[128];
- u8 init;
+ u8 init;
};
enum uli526x_offsets {
@@ -258,7 +258,7 @@
struct uli526x_board_info *db; /* board information structure */
struct net_device *dev;
int i, err;
-
+
ULI526X_DBUG(0, "uli526x_init_one()", 0);
if (!printed_version++)
@@ -316,7 +316,7 @@
err = -ENOMEM;
goto err_out_nomem;
}
-
+
db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
db->first_tx_desc_dma = db->desc_pool_dma_ptr;
db->buf_pool_start = db->buf_pool_ptr;
@@ -324,14 +324,14 @@
db->chip_id = ent->driver_data;
db->ioaddr = pci_resource_start(pdev, 0);
-
+
db->pdev = pdev;
db->init = 1;
-
+
dev->base_addr = db->ioaddr;
dev->irq = pdev->irq;
pci_set_drvdata(pdev, dev);
-
+
/* Register some necessary functions */
dev->open = &uli526x_open;
dev->hard_start_xmit = &uli526x_start_xmit;
@@ -341,7 +341,7 @@
dev->ethtool_ops = &netdev_ethtool_ops;
spin_lock_init(&db->lock);
-
+
/* read 64 word srom data */
for (i = 0; i < 64; i++)
((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i));
@@ -374,7 +374,7 @@
goto err_out_res;
printk(KERN_INFO "%s: ULi M%04lx at pci%s,",dev->name,ent->driver_data >> 16,pci_name(pdev));
-
+
for (i = 0; i < 6; i++)
printk("%c%02x", i ? ':' : ' ', dev->dev_addr[i]);
printk(", irq %d.\n", dev->irq);
@@ -389,7 +389,7 @@
if(db->desc_pool_ptr)
pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20,
db->desc_pool_ptr, db->desc_pool_dma_ptr);
-
+
if(db->buf_pool_ptr != NULL)
pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
db->buf_pool_ptr, db->buf_pool_dma_ptr);
@@ -433,7 +433,7 @@
{
int ret;
struct uli526x_board_info *db = netdev_priv(dev);
-
+
ULI526X_DBUG(0, "uli526x_open", 0);
ret = request_irq(dev->irq, &uli526x_interrupt, SA_SHIRQ, dev->name, dev);
@@ -454,7 +454,7 @@
/* CR6 operation mode decision */
db->cr6_data |= ULI526X_TXTH_256;
db->cr0_data = CR0_DEFAULT;
-
+
/* Initialize ULI526X board */
uli526x_init(dev);
@@ -604,7 +604,7 @@
/* Restore CR7 to enable interrupt */
spin_unlock_irqrestore(&db->lock, flags);
outl(db->cr7_data, dev->base_addr + DCR7);
-
+
/* free this SKB */
dev_kfree_skb(skb);
@@ -782,7 +782,7 @@
struct sk_buff *skb;
int rxlen;
u32 rdes0;
-
+
rxptr = db->rx_ready_ptr;
while(db->rx_avail_cnt) {
@@ -821,7 +821,7 @@
if ( !(rdes0 & 0x8000) ||
((db->cr6_data & CR6_PM) && (rxlen>6)) ) {
skb = rxptr->rx_skb_ptr;
-
+
/* Good packet, send to upper layer */
/* Shorst packet used new SKB */
if ( (rxlen < RX_COPY_SIZE) &&
@@ -841,7 +841,7 @@
dev->last_rx = jiffies;
db->stats.rx_packets++;
db->stats.rx_bytes += rxlen;
-
+
} else {
/* Reuse SKB buffer when the packet is error */
ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
@@ -911,7 +911,7 @@
SUPPORTED_100baseT_Full |
SUPPORTED_Autoneg |
SUPPORTED_MII);
-
+
ecmd->advertising = (ADVERTISED_10baseT_Half |
ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half |
@@ -924,13 +924,13 @@
ecmd->phy_address = db->phy_addr;
ecmd->transceiver = XCVR_EXTERNAL;
-
+
ecmd->speed = 10;
ecmd->duplex = DUPLEX_HALF;
-
+
if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
{
- ecmd->speed = 100;
+ ecmd->speed = 100;
}
if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
{
@@ -939,11 +939,11 @@
if(db->link_failed)
{
ecmd->speed = -1;
- ecmd->duplex = -1;
+ ecmd->duplex = -1;
}
-
+
if (db->media_mode & ULI526X_AUTO)
- {
+ {
ecmd->autoneg = AUTONEG_ENABLE;
}
}
@@ -964,15 +964,15 @@
static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) {
struct uli526x_board_info *np = netdev_priv(dev);
-
+
ULi_ethtool_gset(np, cmd);
-
+
return 0;
}
static u32 netdev_get_link(struct net_device *dev) {
struct uli526x_board_info *np = netdev_priv(dev);
-
+
if(np->link_failed)
return 0;
else
@@ -1005,11 +1005,11 @@
struct uli526x_board_info *db = netdev_priv(dev);
unsigned long flags;
u8 TmpSpeed=10;
-
+
//ULI526X_DBUG(0, "uli526x_timer()", 0);
spin_lock_irqsave(&db->lock, flags);
-
+
/* Dynamic reset ULI526X : system error or transmit time-out */
tmp_cr8 = inl(db->ioaddr + DCR8);
if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) {
@@ -1021,9 +1021,9 @@
/* TX polling kick monitor */
if ( db->tx_packet_cnt &&
time_after(jiffies, dev->trans_start + ULI526X_TX_KICK) ) {
- outl(0x1, dev->base_addr + DCR1); // Tx polling again
+ outl(0x1, dev->base_addr + DCR1); // Tx polling again
- // TX Timeout
+ // TX Timeout
if ( time_after(jiffies, dev->trans_start + ULI526X_TX_TIMEOUT) ) {
db->reset_TXtimeout++;
db->wait_reset = 1;
@@ -1073,7 +1073,7 @@
uli526x_sense_speed(db) )
db->link_failed = 1;
uli526x_process_mode(db);
-
+
if(db->link_failed==0)
{
if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
@@ -1404,7 +1404,7 @@
phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
if ( (phy_mode & 0x24) == 0x24 ) {
-
+
phy_mode = ((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)<<7);
if(phy_mode&0x8000)
phy_mode = 0x8000;
@@ -1414,7 +1414,7 @@
phy_mode = 0x2000;
else
phy_mode = 0x1000;
-
+
/* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */
switch (phy_mode) {
case 0x1000: db->op_mode = ULI526X_10MHF; break;
@@ -1442,7 +1442,7 @@
static void uli526x_set_phyxcer(struct uli526x_board_info *db)
{
u16 phy_reg;
-
+
/* Phyxcer capability setting */
phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0;
@@ -1457,7 +1457,7 @@
case ULI526X_100MHF: phy_reg |= 0x80; break;
case ULI526X_100MFD: phy_reg |= 0x100; break;
}
-
+
}
/* Write new capability to Phyxcer Reg4 */
@@ -1556,7 +1556,7 @@
/* Write a word data to PHY controller */
for ( i = 0x8000; i > 0; i >>= 1)
phy_write_1bit(ioaddr, phy_data & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
-
+
}
@@ -1574,7 +1574,7 @@
return phy_readby_cr10(iobase, phy_addr, offset);
/* M5261/M5263 Chip */
ioaddr = iobase + DCR9;
-
+
/* Send 33 synchronization clock to Phy controller */
for (i = 0; i < 35; i++)
phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
@@ -1610,7 +1610,7 @@
static u16 phy_readby_cr10(unsigned long iobase, u8 phy_addr, u8 offset)
{
unsigned long ioaddr,cr10_value;
-
+
ioaddr = iobase + DCR10;
cr10_value = phy_addr;
cr10_value = (cr10_value<<5) + offset;
@@ -1629,7 +1629,7 @@
static void phy_writeby_cr10(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data)
{
unsigned long ioaddr,cr10_value;
-
+
ioaddr = iobase + DCR10;
cr10_value = phy_addr;
cr10_value = (cr10_value<<5) + offset;
@@ -1659,7 +1659,7 @@
static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id)
{
u16 phy_data;
-
+
outl(0x50000 , ioaddr);
udelay(1);
phy_data = ( inl(ioaddr) >> 19 ) & 0x1;
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index 136a70c..64ecf929 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -38,12 +38,12 @@
Copyright (C) 2001 Manfred Spraul
* ethtool support (jgarzik)
* Replace some MII-related magic numbers with constants (jgarzik)
-
+
TODO:
* enable pci_power_off
* Wake-On-LAN
*/
-
+
#define DRV_NAME "winbond-840"
#define DRV_VERSION "1.01-d"
#define DRV_RELDATE "Nov-17-2001"
@@ -57,7 +57,7 @@
c-help-symbol: CONFIG_WINBOND_840
c-help: This driver is for the Winbond W89c840 chip. It also works with
c-help: the TX9882 chip on the Compex RL100-ATX board.
-c-help: More specific information and updates are available from
+c-help: More specific information and updates are available from
c-help: http://www.scyld.com/network/drivers.html
*/
@@ -207,7 +207,7 @@
*/
-
+
/*
PCI probe table.
@@ -374,7 +374,7 @@
static struct ethtool_ops netdev_ethtool_ops;
static int netdev_close(struct net_device *dev);
-
+
static int __devinit w840_probe1 (struct pci_dev *pdev,
const struct pci_device_id *ent)
@@ -434,7 +434,7 @@
np->mii_if.mdio_read = mdio_read;
np->mii_if.mdio_write = mdio_write;
np->base_addr = ioaddr;
-
+
pci_set_drvdata(pdev, dev);
if (dev->mem_start)
@@ -510,7 +510,7 @@
return -ENODEV;
}
-
+
/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces. These are
often serial bit streams generated by the host processor.
The example below is for the common 93c46 EEPROM, 64 16 bit words. */
@@ -660,7 +660,7 @@
return;
}
-
+
static int netdev_open(struct net_device *dev)
{
struct netdev_private *np = netdev_priv(dev);
@@ -731,7 +731,7 @@
dev->name, np->phys[0]);
netif_carrier_on(dev);
}
-
+
if ((np->mii & ~0xf) == MII_DAVICOM_DM9101) {
/* If the link partner doesn't support autonegotiation
* the MII detects it's abilities with the "parallel detection".
@@ -761,7 +761,7 @@
result |= 0x20000000;
if (result != np->csr6 && debug)
printk(KERN_INFO "%s: Setting %dMBit-%s-duplex based on MII#%d\n",
- dev->name, fasteth ? 100 : 10,
+ dev->name, fasteth ? 100 : 10,
duplex ? "full" : "half", np->phys[0]);
return result;
}
@@ -947,7 +947,7 @@
iowrite32(i, ioaddr + PCIBusCfg);
np->csr6 = 0;
- /* 128 byte Tx threshold;
+ /* 128 byte Tx threshold;
Transmit on; Receive on; */
update_csr6(dev, 0x00022002 | update_link(dev) | __set_rx_mode(dev));
@@ -1584,7 +1584,7 @@
static void __devexit w840_remove1 (struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
-
+
if (dev) {
struct netdev_private *np = netdev_priv(dev);
unregister_netdev(dev);
@@ -1640,7 +1640,7 @@
spin_unlock_wait(&dev->xmit_lock);
synchronize_irq(dev->irq);
-
+
np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff;
/* no more hardware accesses behind this line. */
diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c
index 5634410..63c2175 100644
--- a/drivers/net/tulip/xircom_cb.c
+++ b/drivers/net/tulip/xircom_cb.c
@@ -1,11 +1,11 @@
/*
- * xircom_cb: A driver for the (tulip-like) Xircom Cardbus ethernet cards
+ * xircom_cb: A driver for the (tulip-like) Xircom Cardbus ethernet cards
*
* This software is (C) by the respective authors, and licensed under the GPL
* License.
*
* Written by Arjan van de Ven for Red Hat, Inc.
- * Based on work by Jeff Garzik, Doug Ledford and Donald Becker
+ * Based on work by Jeff Garzik, Doug Ledford and Donald Becker
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
@@ -93,7 +93,7 @@
unsigned long io_port;
int open;
-
+
/* transmit_used is the rotating counter that indicates which transmit
descriptor has to be used next */
int transmit_used;
@@ -153,10 +153,10 @@
MODULE_DEVICE_TABLE(pci, xircom_pci_table);
static struct pci_driver xircom_ops = {
- .name = "xircom_cb",
- .id_table = xircom_pci_table,
- .probe = xircom_probe,
- .remove = xircom_remove,
+ .name = "xircom_cb",
+ .id_table = xircom_pci_table,
+ .probe = xircom_probe,
+ .remove = xircom_remove,
.suspend =NULL,
.resume =NULL
};
@@ -174,7 +174,7 @@
buffer[i2++]='1';
else
buffer[i2++]='0';
- if ((i&3)==0)
+ if ((i&3)==0)
buffer[i2++]=' ';
}
printk("%s\n",buffer);
@@ -196,10 +196,10 @@
/* xircom_probe is the code that gets called on device insertion.
it sets up the hardware and registers the device to the networklayer.
-
+
TODO: Send 1 or 2 "dummy" packets here as the card seems to discard the
first two packets that get send, and pump hates that.
-
+
*/
static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
@@ -209,7 +209,7 @@
unsigned long flags;
unsigned short tmp16;
enter("xircom_probe");
-
+
/* First do the PCI initialisation */
if (pci_enable_device(pdev))
@@ -217,24 +217,24 @@
/* disable all powermanagement */
pci_write_config_dword(pdev, PCI_POWERMGMT, 0x0000);
-
+
pci_set_master(pdev); /* Why isn't this done by pci_enable_device ?*/
- /* clear PCI status, if any */
- pci_read_config_word (pdev,PCI_STATUS, &tmp16);
+ /* clear PCI status, if any */
+ pci_read_config_word (pdev,PCI_STATUS, &tmp16);
pci_write_config_word (pdev, PCI_STATUS,tmp16);
-
+
pci_read_config_byte(pdev, PCI_REVISION_ID, &chip_rev);
-
+
if (!request_region(pci_resource_start(pdev, 0), 128, "xircom_cb")) {
printk(KERN_ERR "xircom_probe: failed to allocate io-region\n");
return -ENODEV;
}
- /*
+ /*
Before changing the hardware, allocate the memory.
This way, we can fail gracefully if not enough memory
- is available.
+ is available.
*/
dev = alloc_etherdev(sizeof(struct xircom_private));
if (!dev) {
@@ -242,13 +242,13 @@
goto device_fail;
}
private = netdev_priv(dev);
-
+
/* Allocate the send/receive buffers */
private->rx_buffer = pci_alloc_consistent(pdev,8192,&private->rx_dma_handle);
if (private->rx_buffer == NULL) {
printk(KERN_ERR "xircom_probe: no memory for rx buffer \n");
goto rx_buf_fail;
- }
+ }
private->tx_buffer = pci_alloc_consistent(pdev,8192,&private->tx_dma_handle);
if (private->tx_buffer == NULL) {
printk(KERN_ERR "xircom_probe: no memory for tx buffer \n");
@@ -265,11 +265,11 @@
spin_lock_init(&private->lock);
dev->irq = pdev->irq;
dev->base_addr = private->io_port;
-
+
initialize_card(private);
read_mac_address(private);
setup_descriptors(private);
-
+
dev->open = &xircom_open;
dev->hard_start_xmit = &xircom_start_xmit;
dev->stop = &xircom_close;
@@ -285,19 +285,19 @@
printk(KERN_ERR "xircom_probe: netdevice registration failed.\n");
goto reg_fail;
}
-
+
printk(KERN_INFO "%s: Xircom cardbus revision %i at irq %i \n", dev->name, chip_rev, pdev->irq);
/* start the transmitter to get a heartbeat */
/* TODO: send 2 dummy packets here */
transceiver_voodoo(private);
-
+
spin_lock_irqsave(&private->lock,flags);
activate_transmitter(private);
activate_receiver(private);
spin_unlock_irqrestore(&private->lock,flags);
-
+
trigger_receive(private);
-
+
leave("xircom_probe");
return 0;
@@ -332,7 +332,7 @@
free_netdev(dev);
pci_set_drvdata(pdev, NULL);
leave("xircom_remove");
-}
+}
static irqreturn_t xircom_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
{
@@ -346,11 +346,11 @@
spin_lock(&card->lock);
status = inl(card->io_port+CSR5);
-#ifdef DEBUG
+#ifdef DEBUG
print_binary(status);
printk("tx status 0x%08x 0x%08x \n",card->tx_buffer[0],card->tx_buffer[4]);
printk("rx status 0x%08x 0x%08x \n",card->rx_buffer[0],card->rx_buffer[4]);
-#endif
+#endif
/* Handle shared irq and hotplug */
if (status == 0 || status == 0xffffffff) {
spin_unlock(&card->lock);
@@ -366,21 +366,21 @@
netif_carrier_on(dev);
else
netif_carrier_off(dev);
-
+
}
- /* Clear all remaining interrupts */
+ /* Clear all remaining interrupts */
status |= 0xffffffff; /* FIXME: make this clear only the
real existing bits */
outl(status,card->io_port+CSR5);
-
- for (i=0;i<NUMDESCRIPTORS;i++)
+
+ for (i=0;i<NUMDESCRIPTORS;i++)
investigate_write_descriptor(dev,card,i,bufferoffsets[i]);
- for (i=0;i<NUMDESCRIPTORS;i++)
+ for (i=0;i<NUMDESCRIPTORS;i++)
investigate_read_descriptor(dev,card,i,bufferoffsets[i]);
-
+
spin_unlock(&card->lock);
leave("xircom_interrupt");
return IRQ_HANDLED;
@@ -393,38 +393,38 @@
int nextdescriptor;
int desc;
enter("xircom_start_xmit");
-
+
card = netdev_priv(dev);
spin_lock_irqsave(&card->lock,flags);
-
+
/* First see if we can free some descriptors */
- for (desc=0;desc<NUMDESCRIPTORS;desc++)
+ for (desc=0;desc<NUMDESCRIPTORS;desc++)
investigate_write_descriptor(dev,card,desc,bufferoffsets[desc]);
-
-
+
+
nextdescriptor = (card->transmit_used +1) % (NUMDESCRIPTORS);
desc = card->transmit_used;
-
+
/* only send the packet if the descriptor is free */
if (card->tx_buffer[4*desc]==0) {
/* Copy the packet data; zero the memory first as the card
sometimes sends more than you ask it to. */
-
+
memset(&card->tx_buffer[bufferoffsets[desc]/4],0,1536);
memcpy(&(card->tx_buffer[bufferoffsets[desc]/4]),skb->data,skb->len);
-
-
+
+
/* FIXME: The specification tells us that the length we send HAS to be a multiple of
4 bytes. */
-
+
card->tx_buffer[4*desc+1] = skb->len;
if (desc == NUMDESCRIPTORS-1)
card->tx_buffer[4*desc+1] |= (1<<25); /* bit 25: last descriptor of the ring */
card->tx_buffer[4*desc+1] |= 0xF0000000;
- /* 0xF0... means want interrupts*/
+ /* 0xF0... means want interrupts*/
card->tx_skb[desc] = skb;
-
+
wmb();
/* This gives the descriptor to the card */
card->tx_buffer[4*desc] = 0x80000000;
@@ -433,18 +433,18 @@
netif_stop_queue(dev);
}
card->transmit_used = nextdescriptor;
- leave("xircom-start_xmit - sent");
+ leave("xircom-start_xmit - sent");
spin_unlock_irqrestore(&card->lock,flags);
return 0;
}
-
+
/* Uh oh... no free descriptor... drop the packet */
netif_stop_queue(dev);
spin_unlock_irqrestore(&card->lock,flags);
trigger_transmit(card);
-
+
return -EIO;
}
@@ -462,7 +462,7 @@
leave("xircom_open - No IRQ");
return retval;
}
-
+
xircom_up(xp);
xp->open = 1;
leave("xircom_open");
@@ -473,31 +473,31 @@
{
struct xircom_private *card;
unsigned long flags;
-
+
enter("xircom_close");
card = netdev_priv(dev);
netif_stop_queue(dev); /* we don't want new packets */
-
+
spin_lock_irqsave(&card->lock,flags);
-
+
disable_all_interrupts(card);
-#if 0
+#if 0
/* We can enable this again once we send dummy packets on ifconfig ethX up */
deactivate_receiver(card);
deactivate_transmitter(card);
-#endif
+#endif
remove_descriptors(card);
-
+
spin_unlock_irqrestore(&card->lock,flags);
-
+
card->open = 0;
free_irq(dev->irq,dev);
-
+
leave("xircom_close");
-
+
return 0;
-
+
}
@@ -506,8 +506,8 @@
{
struct xircom_private *card = netdev_priv(dev);
return &card->stats;
-}
-
+}
+
#ifdef CONFIG_NET_POLL_CONTROLLER
static void xircom_poll_controller(struct net_device *dev)
@@ -540,7 +540,7 @@
outl(val, card->io_port + CSR0);
- val = 0; /* Value 0x00 is a safe and conservative value
+ val = 0; /* Value 0x00 is a safe and conservative value
for the PCI configuration settings */
outl(val, card->io_port + CSR0);
@@ -617,23 +617,23 @@
/* Rx Descr2: address of the buffer
we store the buffer at the 2nd half of the page */
-
+
address = (unsigned long) card->rx_dma_handle;
card->rx_buffer[i*4 + 2] = cpu_to_le32(address + bufferoffsets[i]);
/* Rx Desc3: address of 2nd buffer -> 0 */
card->rx_buffer[i*4 + 3] = 0;
}
-
+
wmb();
/* Write the receive descriptor ring address to the card */
address = (unsigned long) card->rx_dma_handle;
- val = cpu_to_le32(address);
+ val = cpu_to_le32(address);
outl(val, card->io_port + CSR3); /* Receive descr list address */
/* transmit descriptors */
memset(card->tx_buffer, 0, 128); /* clear the descriptors */
-
+
for (i=0;i<NUMDESCRIPTORS;i++ ) {
/* Tx Descr0: Empty, we own it, no errors -> 0x00000000 */
card->tx_buffer[i*4 + 0] = 0x00000000;
@@ -641,7 +641,7 @@
card->tx_buffer[i*4 + 1] = 1536;
if (i==NUMDESCRIPTORS-1)
card->tx_buffer[i*4 + 1] |= (1 << 25); /* bit 25 is "last descriptor" */
-
+
/* Tx Descr2: address of the buffer
we store the buffer at the 2nd half of the page */
address = (unsigned long) card->tx_dma_handle;
@@ -748,7 +748,7 @@
activate_receiver enables the receiver on the card.
Before being allowed to active the receiver, the receiver
must be completely de-activated. To achieve this,
-this code actually disables the receiver first; then it waits for the
+this code actually disables the receiver first; then it waits for the
receiver to become inactive, then it activates the receiver and then
it waits for the receiver to be active.
@@ -762,13 +762,13 @@
val = inl(card->io_port + CSR6); /* Operation mode */
-
+
/* If the "active" bit is set and the receiver is already
active, no need to do the expensive thing */
if ((val&2) && (receive_active(card)))
return;
-
-
+
+
val = val & ~2; /* disable the receiver */
outl(val, card->io_port + CSR6);
@@ -805,7 +805,7 @@
/*
deactivate_receiver disables the receiver on the card.
-To achieve this this code disables the receiver first;
+To achieve this this code disables the receiver first;
then it waits for the receiver to become inactive.
must be called with the lock held and interrupts disabled.
@@ -840,7 +840,7 @@
activate_transmitter enables the transmitter on the card.
Before being allowed to active the transmitter, the transmitter
must be completely de-activated. To achieve this,
-this code actually disables the transmitter first; then it waits for the
+this code actually disables the transmitter first; then it waits for the
transmitter to become inactive, then it activates the transmitter and then
it waits for the transmitter to be active again.
@@ -856,7 +856,7 @@
val = inl(card->io_port + CSR6); /* Operation mode */
/* If the "active" bit is set and the receiver is already
- active, no need to do the expensive thing */
+ active, no need to do the expensive thing */
if ((val&(1<<13)) && (transmit_active(card)))
return;
@@ -896,7 +896,7 @@
/*
deactivate_transmitter disables the transmitter on the card.
-To achieve this this code disables the transmitter first;
+To achieve this this code disables the transmitter first;
then it waits for the transmitter to become inactive.
must be called with the lock held and interrupts disabled.
@@ -990,7 +990,7 @@
{
unsigned int val;
enter("enable_all_interrupts");
-
+
val = 0; /* disable all interrupts */
outl(val, card->io_port + CSR7);
@@ -1031,8 +1031,8 @@
unsigned int val;
enter("enable_promisc");
- val = inl(card->io_port + CSR6);
- val = val | (1 << 6);
+ val = inl(card->io_port + CSR6);
+ val = val | (1 << 6);
outl(val, card->io_port + CSR6);
leave("enable_promisc");
@@ -1042,7 +1042,7 @@
-/*
+/*
link_status() checks the the links status and will return 0 for no link, 10 for 10mbit link and 100 for.. guess what.
Must be called in locked state with interrupts disabled
@@ -1051,15 +1051,15 @@
{
unsigned int val;
enter("link_status");
-
+
val = inb(card->io_port + CSR12);
-
+
if (!(val&(1<<2))) /* bit 2 is 0 for 10mbit link, 1 for not an 10mbit link */
return 10;
if (!(val&(1<<1))) /* bit 1 is 0 for 100mbit link, 1 for not an 100mbit link */
return 100;
-
- /* If we get here -> no link at all */
+
+ /* If we get here -> no link at all */
leave("link_status");
return 0;
@@ -1071,7 +1071,7 @@
/*
read_mac_address() reads the MAC address from the NIC and stores it in the "dev" structure.
-
+
This function will take the spinlock itself and can, as a result, not be called with the lock helt.
*/
static void read_mac_address(struct xircom_private *card)
@@ -1081,7 +1081,7 @@
int i;
enter("read_mac_address");
-
+
spin_lock_irqsave(&card->lock, flags);
outl(1 << 12, card->io_port + CSR9); /* enable boot rom access */
@@ -1095,7 +1095,7 @@
outl(i + 3, card->io_port + CSR10);
data_count = inl(card->io_port + CSR9) & 0xff;
if ((tuple == 0x22) && (data_id == 0x04) && (data_count == 0x06)) {
- /*
+ /*
* This is it. We have the data we want.
*/
for (j = 0; j < 6; j++) {
@@ -1136,12 +1136,12 @@
spin_lock_irqsave(&card->lock, flags);
outl(0x0008, card->io_port + CSR15);
- udelay(25);
+ udelay(25);
outl(0xa8050000, card->io_port + CSR15);
udelay(25);
outl(0xa00f0000, card->io_port + CSR15);
udelay(25);
-
+
spin_unlock_irqrestore(&card->lock, flags);
netif_start_queue(card->dev);
@@ -1163,15 +1163,15 @@
spin_lock_irqsave(&card->lock, flags);
-
+
enable_link_interrupt(card);
enable_transmit_interrupt(card);
enable_receive_interrupt(card);
enable_common_interrupts(card);
enable_promisc(card);
-
+
/* The card can have received packets already, read them away now */
- for (i=0;i<NUMDESCRIPTORS;i++)
+ for (i=0;i<NUMDESCRIPTORS;i++)
investigate_read_descriptor(card->dev,card,i,bufferoffsets[i]);
@@ -1185,15 +1185,15 @@
/* Bufferoffset is in BYTES */
static void investigate_read_descriptor(struct net_device *dev,struct xircom_private *card, int descnr, unsigned int bufferoffset)
{
- int status;
-
+ int status;
+
enter("investigate_read_descriptor");
status = card->rx_buffer[4*descnr];
-
+
if ((status > 0)) { /* packet received */
-
+
/* TODO: discard error packets */
-
+
short pkt_len = ((status >> 16) & 0x7ff) - 4; /* minus 4, we don't want the CRC */
struct sk_buff *skb;
@@ -1216,7 +1216,7 @@
dev->last_rx = jiffies;
card->stats.rx_packets++;
card->stats.rx_bytes += pkt_len;
-
+
out:
/* give the buffer back to the card */
card->rx_buffer[4*descnr] = 0x80000000;
@@ -1234,9 +1234,9 @@
int status;
enter("investigate_write_descriptor");
-
+
status = card->tx_buffer[4*descnr];
-#if 0
+#if 0
if (status & 0x8000) { /* Major error */
printk(KERN_ERR "Major transmit error status %x \n", status);
card->tx_buffer[4*descnr] = 0;
@@ -1258,7 +1258,7 @@
}
leave("investigate_write_descriptor");
-
+
}
@@ -1271,8 +1271,8 @@
static void __exit xircom_exit(void)
{
pci_unregister_driver(&xircom_ops);
-}
+}
-module_init(xircom_init)
+module_init(xircom_init)
module_exit(xircom_exit)