| #define GSCD_VERSION "0.4a Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>" |
| |
| /* |
| linux/drivers/block/gscd.c - GoldStar R420 CDROM driver |
| |
| Copyright (C) 1995 Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de> |
| based upon pre-works by Eberhard Moenkeberg <emoenke@gwdg.de> |
| |
| |
| For all kind of other information about the GoldStar CDROM |
| and this Linux device driver I installed a WWW-URL: |
| http://linux.rz.fh-hannover.de/~raupach |
| |
| |
| If you are the editor of a Linux CD, you should |
| enable gscd.c within your boot floppy kernel and |
| send me one of your CDs for free. |
| |
| |
| -------------------------------------------------------------------- |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2, or (at your option) |
| any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| |
| -------------------------------------------------------------------- |
| |
| 9 November 1999 -- Make kernel-parameter implementation work with 2.3.x |
| Removed init_module & cleanup_module in favor of |
| module_init & module_exit. |
| Torben Mathiasen <tmm@image.dk> |
| |
| */ |
| |
| /* These settings are for various debug-level. Leave they untouched ... */ |
| #define NO_GSCD_DEBUG |
| #define NO_IOCTL_DEBUG |
| #define NO_MODULE_DEBUG |
| #define NO_FUTURE_WORK |
| /*------------------------*/ |
| |
| #include <linux/module.h> |
| |
| #include <linux/slab.h> |
| #include <linux/errno.h> |
| #include <linux/signal.h> |
| #include <linux/timer.h> |
| #include <linux/fs.h> |
| #include <linux/mm.h> |
| #include <linux/kernel.h> |
| #include <linux/cdrom.h> |
| #include <linux/ioport.h> |
| #include <linux/major.h> |
| #include <linux/string.h> |
| #include <linux/init.h> |
| |
| #include <asm/system.h> |
| #include <asm/io.h> |
| #include <asm/uaccess.h> |
| |
| #define MAJOR_NR GOLDSTAR_CDROM_MAJOR |
| #include <linux/blkdev.h> |
| #include "gscd.h" |
| |
| static int gscdPresent = 0; |
| |
| static unsigned char gscd_buf[2048]; /* buffer for block size conversion */ |
| static int gscd_bn = -1; |
| static short gscd_port = GSCD_BASE_ADDR; |
| module_param_named(gscd, gscd_port, short, 0); |
| |
| /* Kommt spaeter vielleicht noch mal dran ... |
| * static DECLARE_WAIT_QUEUE_HEAD(gscd_waitq); |
| */ |
| |
| static void gscd_read_cmd(struct request *req); |
| static void gscd_hsg2msf(long hsg, struct msf *msf); |
| static void gscd_bin2bcd(unsigned char *p); |
| |
| /* Schnittstellen zum Kern/FS */ |
| |
| static void __do_gscd_request(unsigned long dummy); |
| static int gscd_ioctl(struct inode *, struct file *, unsigned int, |
| unsigned long); |
| static int gscd_open(struct inode *, struct file *); |
| static int gscd_release(struct inode *, struct file *); |
| static int check_gscd_med_chg(struct gendisk *disk); |
| |
| /* GoldStar Funktionen */ |
| |
| static void cmd_out(int, char *, char *, int); |
| static void cmd_status(void); |
| static void init_cd_drive(int); |
| |
| static int get_status(void); |
| static void clear_Audio(void); |
| static void cc_invalidate(void); |
| |
| /* some things for the next version */ |
| #ifdef FUTURE_WORK |
| static void update_state(void); |
| static long gscd_msf2hsg(struct msf *mp); |
| static int gscd_bcd2bin(unsigned char bcd); |
| #endif |
| |
| |
| /* lo-level cmd-Funktionen */ |
| |
| static void cmd_info_in(char *, int); |
| static void cmd_end(void); |
| static void cmd_read_b(char *, int, int); |
| static void cmd_read_w(char *, int, int); |
| static int cmd_unit_alive(void); |
| static void cmd_write_cmd(char *); |
| |
| |
| /* GoldStar Variablen */ |
| |
| static int curr_drv_state; |
| static int drv_states[] = { 0, 0, 0, 0, 0, 0, 0, 0 }; |
| static int drv_mode; |
| static int disk_state; |
| static int speed; |
| static int ndrives; |
| |
| static unsigned char drv_num_read; |
| static unsigned char f_dsk_valid; |
| static unsigned char current_drive; |
| static unsigned char f_drv_ok; |
| |
| |
| static char f_AudioPlay; |
| static char f_AudioPause; |
| static int AudioStart_m; |
| static int AudioStart_f; |
| static int AudioEnd_m; |
| static int AudioEnd_f; |
| |
| static DEFINE_TIMER(gscd_timer, NULL, 0, 0); |
| static DEFINE_SPINLOCK(gscd_lock); |
| static struct request_queue *gscd_queue; |
| |
| static struct block_device_operations gscd_fops = { |
| .owner = THIS_MODULE, |
| .open = gscd_open, |
| .release = gscd_release, |
| .ioctl = gscd_ioctl, |
| .media_changed = check_gscd_med_chg, |
| }; |
| |
| /* |
| * Checking if the media has been changed |
| * (not yet implemented) |
| */ |
| static int check_gscd_med_chg(struct gendisk *disk) |
| { |
| #ifdef GSCD_DEBUG |
| printk("gscd: check_med_change\n"); |
| #endif |
| return 0; |
| } |
| |
| |
| #ifndef MODULE |
| /* Using new interface for kernel-parameters */ |
| |
| static int __init gscd_setup(char *str) |
| { |
| int ints[2]; |
| (void) get_options(str, ARRAY_SIZE(ints), ints); |
| |
| if (ints[0] > 0) { |
| gscd_port = ints[1]; |
| } |
| return 1; |
| } |
| |
| __setup("gscd=", gscd_setup); |
| |
| #endif |
| |
| static int gscd_ioctl(struct inode *ip, struct file *fp, unsigned int cmd, |
| unsigned long arg) |
| { |
| unsigned char to_do[10]; |
| unsigned char dummy; |
| |
| |
| switch (cmd) { |
| case CDROMSTART: /* Spin up the drive */ |
| /* Don't think we can do this. Even if we could, |
| * I think the drive times out and stops after a while |
| * anyway. For now, ignore it. |
| */ |
| return 0; |
| |
| case CDROMRESUME: /* keine Ahnung was das ist */ |
| return 0; |
| |
| |
| case CDROMEJECT: |
| cmd_status(); |
| to_do[0] = CMD_TRAY_CTL; |
| cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0); |
| |
| return 0; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| } |
| |
| |
| /* |
| * Take care of the different block sizes between cdrom and Linux. |
| * When Linux gets variable block sizes this will probably go away. |
| */ |
| |
| static void gscd_transfer(struct request *req) |
| { |
| while (req->nr_sectors > 0 && gscd_bn == req->sector / 4) { |
| long offs = (req->sector & 3) * 512; |
| memcpy(req->buffer, gscd_buf + offs, 512); |
| req->nr_sectors--; |
| req->sector++; |
| req->buffer += 512; |
| } |
| } |
| |
| |
| /* |
| * I/O request routine called from Linux kernel. |
| */ |
| |
| static void do_gscd_request(request_queue_t * q) |
| { |
| __do_gscd_request(0); |
| } |
| |
| static void __do_gscd_request(unsigned long dummy) |
| { |
| struct request *req; |
| unsigned int block; |
| unsigned int nsect; |
| |
| repeat: |
| req = elv_next_request(gscd_queue); |
| if (!req) |
| return; |
| |
| block = req->sector; |
| nsect = req->nr_sectors; |
| |
| if (req->sector == -1) |
| goto out; |
| |
| if (rq_data_dir(req) != READ) { |
| printk("GSCD: bad cmd %u\n", rq_data_dir(req)); |
| end_request(req, 0); |
| goto repeat; |
| } |
| |
| gscd_transfer(req); |
| |
| /* if we satisfied the request from the buffer, we're done. */ |
| |
| if (req->nr_sectors == 0) { |
| end_request(req, 1); |
| goto repeat; |
| } |
| #ifdef GSCD_DEBUG |
| printk("GSCD: block %d, nsect %d\n", block, nsect); |
| #endif |
| gscd_read_cmd(req); |
| out: |
| return; |
| } |
| |
| |
| |
| /* |
| * Check the result of the set-mode command. On success, send the |
| * read-data command. |
| */ |
| |
| static void gscd_read_cmd(struct request *req) |
| { |
| long block; |
| struct gscd_Play_msf gscdcmd; |
| char cmd[] = { CMD_READ, 0x80, 0, 0, 0, 0, 1 }; /* cmd mode M-S-F secth sectl */ |
| |
| cmd_status(); |
| if (disk_state & (ST_NO_DISK | ST_DOOR_OPEN)) { |
| printk("GSCD: no disk or door open\n"); |
| end_request(req, 0); |
| } else { |
| if (disk_state & ST_INVALID) { |
| printk("GSCD: disk invalid\n"); |
| end_request(req, 0); |
| } else { |
| gscd_bn = -1; /* purge our buffer */ |
| block = req->sector / 4; |
| gscd_hsg2msf(block, &gscdcmd.start); /* cvt to msf format */ |
| |
| cmd[2] = gscdcmd.start.min; |
| cmd[3] = gscdcmd.start.sec; |
| cmd[4] = gscdcmd.start.frame; |
| |
| #ifdef GSCD_DEBUG |
| printk("GSCD: read msf %d:%d:%d\n", cmd[2], cmd[3], |
| cmd[4]); |
| #endif |
| cmd_out(TYPE_DATA, (char *) &cmd, |
| (char *) &gscd_buf[0], 1); |
| |
| gscd_bn = req->sector / 4; |
| gscd_transfer(req); |
| end_request(req, 1); |
| } |
| } |
| SET_TIMER(__do_gscd_request, 1); |
| } |
| |
| |
| /* |
| * Open the device special file. Check that a disk is in. |
| */ |
| |
| static int gscd_open(struct inode *ip, struct file *fp) |
| { |
| int st; |
| |
| #ifdef GSCD_DEBUG |
| printk("GSCD: open\n"); |
| #endif |
| |
| if (gscdPresent == 0) |
| return -ENXIO; /* no hardware */ |
| |
| get_status(); |
| st = disk_state & (ST_NO_DISK | ST_DOOR_OPEN); |
| if (st) { |
| printk("GSCD: no disk or door open\n"); |
| return -ENXIO; |
| } |
| |
| /* if (updateToc() < 0) |
| return -EIO; |
| */ |
| |
| return 0; |
| } |
| |
| |
| /* |
| * On close, we flush all gscd blocks from the buffer cache. |
| */ |
| |
| static int gscd_release(struct inode *inode, struct file *file) |
| { |
| |
| #ifdef GSCD_DEBUG |
| printk("GSCD: release\n"); |
| #endif |
| |
| gscd_bn = -1; |
| |
| return 0; |
| } |
| |
| |
| static int get_status(void) |
| { |
| int status; |
| |
| cmd_status(); |
| status = disk_state & (ST_x08 | ST_x04 | ST_INVALID | ST_x01); |
| |
| if (status == (ST_x08 | ST_x04 | ST_INVALID | ST_x01)) { |
| cc_invalidate(); |
| return 1; |
| } else { |
| return 0; |
| } |
| } |
| |
| |
| static void cc_invalidate(void) |
| { |
| drv_num_read = 0xFF; |
| f_dsk_valid = 0xFF; |
| current_drive = 0xFF; |
| f_drv_ok = 0xFF; |
| |
| clear_Audio(); |
| |
| } |
| |
| static void clear_Audio(void) |
| { |
| |
| f_AudioPlay = 0; |
| f_AudioPause = 0; |
| AudioStart_m = 0; |
| AudioStart_f = 0; |
| AudioEnd_m = 0; |
| AudioEnd_f = 0; |
| |
| } |
| |
| /* |
| * waiting ? |
| */ |
| |
| static int wait_drv_ready(void) |
| { |
| int found, read; |
| |
| do { |
| found = inb(GSCDPORT(0)); |
| found &= 0x0f; |
| read = inb(GSCDPORT(0)); |
| read &= 0x0f; |
| } while (read != found); |
| |
| #ifdef GSCD_DEBUG |
| printk("Wait for: %d\n", read); |
| #endif |
| |
| return read; |
| } |
| |
| static void cc_Ident(char *respons) |
| { |
| char to_do[] = { CMD_IDENT, 0, 0 }; |
| |
| cmd_out(TYPE_INFO, (char *) &to_do, (char *) respons, (int) 0x1E); |
| |
| } |
| |
| static void cc_SetSpeed(void) |
| { |
| char to_do[] = { CMD_SETSPEED, 0, 0 }; |
| char dummy; |
| |
| if (speed > 0) { |
| to_do[1] = speed & 0x0F; |
| cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0); |
| } |
| } |
| |
| static void cc_Reset(void) |
| { |
| char to_do[] = { CMD_RESET, 0 }; |
| char dummy; |
| |
| cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0); |
| } |
| |
| static void cmd_status(void) |
| { |
| char to_do[] = { CMD_STATUS, 0 }; |
| char dummy; |
| |
| cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0); |
| |
| #ifdef GSCD_DEBUG |
| printk("GSCD: Status: %d\n", disk_state); |
| #endif |
| |
| } |
| |
| static void cmd_out(int cmd_type, char *cmd, char *respo_buf, int respo_count) |
| { |
| int result; |
| |
| |
| result = wait_drv_ready(); |
| if (result != drv_mode) { |
| unsigned long test_loops = 0xFFFF; |
| int i, dummy; |
| |
| outb(curr_drv_state, GSCDPORT(0)); |
| |
| /* LOCLOOP_170 */ |
| do { |
| result = wait_drv_ready(); |
| test_loops--; |
| } while ((result != drv_mode) && (test_loops > 0)); |
| |
| if (result != drv_mode) { |
| disk_state = ST_x08 | ST_x04 | ST_INVALID; |
| return; |
| } |
| |
| /* ...and waiting */ |
| for (i = 1, dummy = 1; i < 0xFFFF; i++) { |
| dummy *= i; |
| } |
| } |
| |
| /* LOC_172 */ |
| /* check the unit */ |
| /* and wake it up */ |
| if (cmd_unit_alive() != 0x08) { |
| /* LOC_174 */ |
| /* game over for this unit */ |
| disk_state = ST_x08 | ST_x04 | ST_INVALID; |
| return; |
| } |
| |
| /* LOC_176 */ |
| #ifdef GSCD_DEBUG |
| printk("LOC_176 "); |
| #endif |
| if (drv_mode == 0x09) { |
| /* magic... */ |
| printk("GSCD: magic ...\n"); |
| outb(result, GSCDPORT(2)); |
| } |
| |
| /* write the command to the drive */ |
| cmd_write_cmd(cmd); |
| |
| /* LOC_178 */ |
| for (;;) { |
| result = wait_drv_ready(); |
| if (result != drv_mode) { |
| /* LOC_179 */ |
| if (result == 0x04) { /* Mode 4 */ |
| /* LOC_205 */ |
| #ifdef GSCD_DEBUG |
| printk("LOC_205 "); |
| #endif |
| disk_state = inb(GSCDPORT(2)); |
| |
| do { |
| result = wait_drv_ready(); |
| } while (result != drv_mode); |
| return; |
| |
| } else { |
| if (result == 0x06) { /* Mode 6 */ |
| /* LOC_181 */ |
| #ifdef GSCD_DEBUG |
| printk("LOC_181 "); |
| #endif |
| |
| if (cmd_type == TYPE_DATA) { |
| /* read data */ |
| /* LOC_184 */ |
| if (drv_mode == 9) { |
| /* read the data to the buffer (word) */ |
| |
| /* (*(cmd+1))?(CD_FRAMESIZE/2):(CD_FRAMESIZE_RAW/2) */ |
| cmd_read_w |
| (respo_buf, |
| respo_count, |
| CD_FRAMESIZE / |
| 2); |
| return; |
| } else { |
| /* read the data to the buffer (byte) */ |
| |
| /* (*(cmd+1))?(CD_FRAMESIZE):(CD_FRAMESIZE_RAW) */ |
| cmd_read_b |
| (respo_buf, |
| respo_count, |
| CD_FRAMESIZE); |
| return; |
| } |
| } else { |
| /* read the info to the buffer */ |
| cmd_info_in(respo_buf, |
| respo_count); |
| return; |
| } |
| |
| return; |
| } |
| } |
| |
| } else { |
| disk_state = ST_x08 | ST_x04 | ST_INVALID; |
| return; |
| } |
| } /* for (;;) */ |
| |
| |
| #ifdef GSCD_DEBUG |
| printk("\n"); |
| #endif |
| } |
| |
| |
| static void cmd_write_cmd(char *pstr) |
| { |
| int i, j; |
| |
| /* LOC_177 */ |
| #ifdef GSCD_DEBUG |
| printk("LOC_177 "); |
| #endif |
| |
| /* calculate the number of parameter */ |
| j = *pstr & 0x0F; |
| |
| /* shift it out */ |
| for (i = 0; i < j; i++) { |
| outb(*pstr, GSCDPORT(2)); |
| pstr++; |
| } |
| } |
| |
| |
| static int cmd_unit_alive(void) |
| { |
| int result; |
| unsigned long max_test_loops; |
| |
| |
| /* LOC_172 */ |
| #ifdef GSCD_DEBUG |
| printk("LOC_172 "); |
| #endif |
| |
| outb(curr_drv_state, GSCDPORT(0)); |
| max_test_loops = 0xFFFF; |
| |
| do { |
| result = wait_drv_ready(); |
| max_test_loops--; |
| } while ((result != 0x08) && (max_test_loops > 0)); |
| |
| return result; |
| } |
| |
| |
| static void cmd_info_in(char *pb, int count) |
| { |
| int result; |
| char read; |
| |
| |
| /* read info */ |
| /* LOC_182 */ |
| #ifdef GSCD_DEBUG |
| printk("LOC_182 "); |
| #endif |
| |
| do { |
| read = inb(GSCDPORT(2)); |
| if (count > 0) { |
| *pb = read; |
| pb++; |
| count--; |
| } |
| |
| /* LOC_183 */ |
| do { |
| result = wait_drv_ready(); |
| } while (result == 0x0E); |
| } while (result == 6); |
| |
| cmd_end(); |
| return; |
| } |
| |
| |
| static void cmd_read_b(char *pb, int count, int size) |
| { |
| int result; |
| int i; |
| |
| |
| /* LOC_188 */ |
| /* LOC_189 */ |
| #ifdef GSCD_DEBUG |
| printk("LOC_189 "); |
| #endif |
| |
| do { |
| do { |
| result = wait_drv_ready(); |
| } while (result != 6 || result == 0x0E); |
| |
| if (result != 6) { |
| cmd_end(); |
| return; |
| } |
| #ifdef GSCD_DEBUG |
| printk("LOC_191 "); |
| #endif |
| |
| for (i = 0; i < size; i++) { |
| *pb = inb(GSCDPORT(2)); |
| pb++; |
| } |
| count--; |
| } while (count > 0); |
| |
| cmd_end(); |
| return; |
| } |
| |
| |
| static void cmd_end(void) |
| { |
| int result; |
| |
| |
| /* LOC_204 */ |
| #ifdef GSCD_DEBUG |
| printk("LOC_204 "); |
| #endif |
| |
| do { |
| result = wait_drv_ready(); |
| if (result == drv_mode) { |
| return; |
| } |
| } while (result != 4); |
| |
| /* LOC_205 */ |
| #ifdef GSCD_DEBUG |
| printk("LOC_205 "); |
| #endif |
| |
| disk_state = inb(GSCDPORT(2)); |
| |
| do { |
| result = wait_drv_ready(); |
| } while (result != drv_mode); |
| return; |
| |
| } |
| |
| |
| static void cmd_read_w(char *pb, int count, int size) |
| { |
| int result; |
| int i; |
| |
| |
| #ifdef GSCD_DEBUG |
| printk("LOC_185 "); |
| #endif |
| |
| do { |
| /* LOC_185 */ |
| do { |
| result = wait_drv_ready(); |
| } while (result != 6 || result == 0x0E); |
| |
| if (result != 6) { |
| cmd_end(); |
| return; |
| } |
| |
| for (i = 0; i < size; i++) { |
| /* na, hier muss ich noch mal drueber nachdenken */ |
| *pb = inw(GSCDPORT(2)); |
| pb++; |
| } |
| count--; |
| } while (count > 0); |
| |
| cmd_end(); |
| return; |
| } |
| |
| static int __init find_drives(void) |
| { |
| int *pdrv; |
| int drvnum; |
| int subdrv; |
| int i; |
| |
| speed = 0; |
| pdrv = (int *) &drv_states; |
| curr_drv_state = 0xFE; |
| subdrv = 0; |
| drvnum = 0; |
| |
| for (i = 0; i < 8; i++) { |
| subdrv++; |
| cmd_status(); |
| disk_state &= ST_x08 | ST_x04 | ST_INVALID | ST_x01; |
| if (disk_state != (ST_x08 | ST_x04 | ST_INVALID)) { |
| /* LOC_240 */ |
| *pdrv = curr_drv_state; |
| init_cd_drive(drvnum); |
| pdrv++; |
| drvnum++; |
| } else { |
| if (subdrv < 2) { |
| continue; |
| } else { |
| subdrv = 0; |
| } |
| } |
| |
| /* curr_drv_state<<1; <-- das geht irgendwie nicht */ |
| /* muss heissen: curr_drv_state <<= 1; (ist ja Wert-Zuweisung) */ |
| curr_drv_state *= 2; |
| curr_drv_state |= 1; |
| #ifdef GSCD_DEBUG |
| printk("DriveState: %d\n", curr_drv_state); |
| #endif |
| } |
| |
| ndrives = drvnum; |
| return drvnum; |
| } |
| |
| static void __init init_cd_drive(int num) |
| { |
| char resp[50]; |
| int i; |
| |
| printk("GSCD: init unit %d\n", num); |
| cc_Ident((char *) &resp); |
| |
| printk("GSCD: identification: "); |
| for (i = 0; i < 0x1E; i++) { |
| printk("%c", resp[i]); |
| } |
| printk("\n"); |
| |
| cc_SetSpeed(); |
| |
| } |
| |
| #ifdef FUTURE_WORK |
| /* return_done */ |
| static void update_state(void) |
| { |
| unsigned int AX; |
| |
| |
| if ((disk_state & (ST_x08 | ST_x04 | ST_INVALID | ST_x01)) == 0) { |
| if (disk_state == (ST_x08 | ST_x04 | ST_INVALID)) { |
| AX = ST_INVALID; |
| } |
| |
| if ((disk_state & (ST_x08 | ST_x04 | ST_INVALID | ST_x01)) |
| == 0) { |
| invalidate(); |
| f_drv_ok = 0; |
| } |
| |
| AX |= 0x8000; |
| } |
| |
| if (disk_state & ST_PLAYING) { |
| AX |= 0x200; |
| } |
| |
| AX |= 0x100; |
| /* pkt_esbx = AX; */ |
| |
| disk_state = 0; |
| |
| } |
| #endif |
| |
| static struct gendisk *gscd_disk; |
| |
| static void __exit gscd_exit(void) |
| { |
| CLEAR_TIMER; |
| |
| del_gendisk(gscd_disk); |
| put_disk(gscd_disk); |
| if ((unregister_blkdev(MAJOR_NR, "gscd") == -EINVAL)) { |
| printk("What's that: can't unregister GoldStar-module\n"); |
| return; |
| } |
| blk_cleanup_queue(gscd_queue); |
| release_region(gscd_port, GSCD_IO_EXTENT); |
| printk(KERN_INFO "GoldStar-module released.\n"); |
| } |
| |
| /* This is the common initialisation for the GoldStar drive. */ |
| /* It is called at boot time AND for module init. */ |
| static int __init gscd_init(void) |
| { |
| int i; |
| int result; |
| int ret=0; |
| |
| printk(KERN_INFO "GSCD: version %s\n", GSCD_VERSION); |
| printk(KERN_INFO |
| "GSCD: Trying to detect a Goldstar R420 CD-ROM drive at 0x%X.\n", |
| gscd_port); |
| |
| if (!request_region(gscd_port, GSCD_IO_EXTENT, "gscd")) { |
| printk(KERN_WARNING "GSCD: Init failed, I/O port (%X) already" |
| " in use.\n", gscd_port); |
| return -EIO; |
| } |
| |
| |
| /* check for card */ |
| result = wait_drv_ready(); |
| if (result == 0x09) { |
| printk(KERN_WARNING "GSCD: DMA kann ich noch nicht!\n"); |
| ret = -EIO; |
| goto err_out1; |
| } |
| |
| if (result == 0x0b) { |
| drv_mode = result; |
| i = find_drives(); |
| if (i == 0) { |
| printk(KERN_WARNING "GSCD: GoldStar CD-ROM Drive is" |
| " not found.\n"); |
| ret = -EIO; |
| goto err_out1; |
| } |
| } |
| |
| if ((result != 0x0b) && (result != 0x09)) { |
| printk(KERN_WARNING "GSCD: GoldStar Interface Adapter does not " |
| "exist or H/W error\n"); |
| ret = -EIO; |
| goto err_out1; |
| } |
| |
| /* reset all drives */ |
| i = 0; |
| while (drv_states[i] != 0) { |
| curr_drv_state = drv_states[i]; |
| printk(KERN_INFO "GSCD: Reset unit %d ... ", i); |
| cc_Reset(); |
| printk("done\n"); |
| i++; |
| } |
| |
| gscd_disk = alloc_disk(1); |
| if (!gscd_disk) |
| goto err_out1; |
| gscd_disk->major = MAJOR_NR; |
| gscd_disk->first_minor = 0; |
| gscd_disk->fops = &gscd_fops; |
| sprintf(gscd_disk->disk_name, "gscd"); |
| |
| if (register_blkdev(MAJOR_NR, "gscd")) { |
| ret = -EIO; |
| goto err_out2; |
| } |
| |
| gscd_queue = blk_init_queue(do_gscd_request, &gscd_lock); |
| if (!gscd_queue) { |
| ret = -ENOMEM; |
| goto err_out3; |
| } |
| |
| disk_state = 0; |
| gscdPresent = 1; |
| |
| gscd_disk->queue = gscd_queue; |
| add_disk(gscd_disk); |
| |
| printk(KERN_INFO "GSCD: GoldStar CD-ROM Drive found.\n"); |
| return 0; |
| |
| err_out3: |
| unregister_blkdev(MAJOR_NR, "gscd"); |
| err_out2: |
| put_disk(gscd_disk); |
| err_out1: |
| release_region(gscd_port, GSCD_IO_EXTENT); |
| return ret; |
| } |
| |
| static void gscd_hsg2msf(long hsg, struct msf *msf) |
| { |
| hsg += CD_MSF_OFFSET; |
| msf->min = hsg / (CD_FRAMES * CD_SECS); |
| hsg %= CD_FRAMES * CD_SECS; |
| msf->sec = hsg / CD_FRAMES; |
| msf->frame = hsg % CD_FRAMES; |
| |
| gscd_bin2bcd(&msf->min); /* convert to BCD */ |
| gscd_bin2bcd(&msf->sec); |
| gscd_bin2bcd(&msf->frame); |
| } |
| |
| |
| static void gscd_bin2bcd(unsigned char *p) |
| { |
| int u, t; |
| |
| u = *p % 10; |
| t = *p / 10; |
| *p = u | (t << 4); |
| } |
| |
| |
| #ifdef FUTURE_WORK |
| static long gscd_msf2hsg(struct msf *mp) |
| { |
| return gscd_bcd2bin(mp->frame) |
| + gscd_bcd2bin(mp->sec) * CD_FRAMES |
| + gscd_bcd2bin(mp->min) * CD_FRAMES * CD_SECS - CD_MSF_OFFSET; |
| } |
| |
| static int gscd_bcd2bin(unsigned char bcd) |
| { |
| return (bcd >> 4) * 10 + (bcd & 0xF); |
| } |
| #endif |
| |
| MODULE_AUTHOR("Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>"); |
| MODULE_LICENSE("GPL"); |
| module_init(gscd_init); |
| module_exit(gscd_exit); |
| MODULE_ALIAS_BLOCKDEV_MAJOR(GOLDSTAR_CDROM_MAJOR); |