| /* Copyright (c) 2012-2013, Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| &spmi_bus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| |
| qcom,pm8019@0 { |
| spmi-slave-container; |
| reg = <0x0>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| qcom,power_on@800 { |
| compatible = "qcom,qpnp-power-on"; |
| reg = <0x800 0x100>; |
| interrupts = <0x0 0x8 0x2>; |
| interrupt-names = "cblpwr"; |
| qcom,pon-dbc-delay = <15625>; |
| qcom,system-reset; |
| |
| qcom,pon_1 { |
| qcom,pon-type = <2>; |
| qcom,pull-up = <1>; |
| linux,code = <116>; |
| }; |
| }; |
| |
| clkdiv@5b00 { |
| reg = <0x5b00 0x100>; |
| compatible = "qcom,qpnp-clkdiv"; |
| qcom,cxo-freq = <19200000>; |
| }; |
| |
| clkdiv@5c00 { |
| reg = <0x5c00 0x100>; |
| compatible = "qcom,qpnp-clkdiv"; |
| qcom,cxo-freq = <19200000>; |
| }; |
| |
| clkdiv@5d00 { |
| reg = <0x5d00 0x100>; |
| compatible = "qcom,qpnp-clkdiv"; |
| qcom,cxo-freq = <19200000>; |
| }; |
| |
| rtc { |
| spmi-dev-container; |
| compatible = "qcom,qpnp-rtc"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| qcom,qpnp-rtc-write = <0>; |
| qcom,qpnp-rtc-alarm-pwrup = <0>; |
| |
| qcom,pm8019_rtc_rw@6000 { |
| reg = <0x6000 0x100>; |
| }; |
| |
| qcom,pm8019_rtc_alarm@6100 { |
| reg = <0x6100 0x100>; |
| interrupts = <0x0 0x61 0x1>; |
| }; |
| }; |
| |
| pm8019_gpios: gpios { |
| spmi-dev-container; |
| compatible = "qcom,qpnp-pin"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| label = "pm8019-gpio"; |
| |
| gpio@c000 { |
| reg = <0xc000 0x100>; |
| qcom,pin-num = <1>; |
| }; |
| |
| gpio@c100 { |
| reg = <0xc100 0x100>; |
| qcom,pin-num = <2>; |
| }; |
| |
| gpio@c200 { |
| reg = <0xc200 0x100>; |
| qcom,pin-num = <3>; |
| }; |
| |
| gpio@c300 { |
| reg = <0xc300 0x100>; |
| qcom,pin-num = <4>; |
| }; |
| |
| gpio@c400 { |
| reg = <0xc400 0x100>; |
| qcom,pin-num = <5>; |
| }; |
| |
| gpio@c500 { |
| reg = <0xc500 0x100>; |
| qcom,pin-num = <6>; |
| }; |
| }; |
| |
| pm8019_mpps: mpps { |
| spmi-dev-container; |
| compatible = "qcom,qpnp-pin"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| label = "pm8019-mpp"; |
| |
| mpp@a000 { |
| reg = <0xa000 0x100>; |
| qcom,pin-num = <1>; |
| }; |
| |
| mpp@a100 { |
| reg = <0xa100 0x100>; |
| qcom,pin-num = <2>; |
| }; |
| |
| mpp@a200 { |
| reg = <0xa200 0x100>; |
| qcom,pin-num = <3>; |
| }; |
| |
| mpp@a300 { |
| reg = <0xa300 0x100>; |
| qcom,pin-num = <4>; |
| }; |
| |
| mpp@a400 { |
| reg = <0xa400 0x100>; |
| qcom,pin-num = <5>; |
| }; |
| |
| mpp@a500 { |
| reg = <0xa500 0x100>; |
| qcom,pin-num = <6>; |
| }; |
| }; |
| |
| pm8019_vadc: vadc@3100 { |
| compatible = "qcom,qpnp-vadc"; |
| reg = <0x3100 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <0x0 0x31 0x0>; |
| interrupt-names = "eoc-int-en-set"; |
| qcom,adc-bit-resolution = <15>; |
| qcom,adc-vdd-reference = <1800>; |
| |
| chan@8 { |
| label = "die_temp"; |
| reg = <8>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <3>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@9 { |
| label = "ref_625mv"; |
| reg = <9>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@a { |
| label = "ref_1250v"; |
| reg = <0xa>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| }; |
| |
| pm8019_adc_tm: vadc@3400 { |
| compatible = "qcom,qpnp-adc-tm"; |
| reg = <0x3400 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <0x0 0x34 0x0>, |
| <0x0 0x34 0x3>, |
| <0x0 0x34 0x4>; |
| interrupt-names = "eoc-int-en-set", |
| "high-thr-en-set", |
| "low-thr-en-set"; |
| qcom,adc-bit-resolution = <15>; |
| qcom,adc-vdd-reference = <1800>; |
| }; |
| }; |
| |
| qcom,pm8019@1 { |
| spmi-slave-container; |
| reg = <0x1>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| regulator@1400 { |
| regulator-name = "8019_s1"; |
| spmi-dev-container; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "qcom,qpnp-regulator"; |
| reg = <0x1400 0x300>; |
| status = "disabled"; |
| |
| qcom,ctl@1400 { |
| reg = <0x1400 0x100>; |
| }; |
| qcom,ps@1500 { |
| reg = <0x1500 0x100>; |
| }; |
| qcom,freq@1600 { |
| reg = <0x1600 0x100>; |
| }; |
| }; |
| |
| regulator@1700 { |
| regulator-name = "8019_s2"; |
| spmi-dev-container; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "qcom,qpnp-regulator"; |
| reg = <0x1700 0x300>; |
| status = "disabled"; |
| |
| qcom,ctl@1700 { |
| reg = <0x1700 0x100>; |
| }; |
| qcom,ps@1800 { |
| reg = <0x1800 0x100>; |
| }; |
| qcom,freq@1900 { |
| reg = <0x1900 0x100>; |
| }; |
| }; |
| |
| regulator@1a00 { |
| regulator-name = "8019_s3"; |
| spmi-dev-container; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "qcom,qpnp-regulator"; |
| reg = <0x1a00 0x300>; |
| status = "disabled"; |
| |
| qcom,ctl@1a00 { |
| reg = <0x1a00 0x100>; |
| }; |
| qcom,ps@1b00 { |
| reg = <0x1b00 0x100>; |
| }; |
| qcom,freq@1c00 { |
| reg = <0x1c00 0x100>; |
| }; |
| }; |
| |
| regulator@1d00 { |
| regulator-name = "8019_s4"; |
| spmi-dev-container; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "qcom,qpnp-regulator"; |
| reg = <0x1d00 0x300>; |
| status = "disabled"; |
| |
| qcom,ctl@1d00 { |
| reg = <0x1d00 0x100>; |
| }; |
| qcom,ps@1e00 { |
| reg = <0x1e00 0x100>; |
| }; |
| qcom,freq@1f00 { |
| reg = <0x1f00 0x100>; |
| }; |
| }; |
| |
| regulator@4000 { |
| regulator-name = "8019_l1"; |
| reg = <0x4000 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4100 { |
| regulator-name = "8019_l2"; |
| reg = <0x4100 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4200 { |
| regulator-name = "8019_l3"; |
| reg = <0x4200 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4300 { |
| regulator-name = "8019_l4"; |
| reg = <0x4300 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4400 { |
| regulator-name = "8019_l5"; |
| reg = <0x4400 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4500 { |
| regulator-name = "8019_l6"; |
| reg = <0x4500 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4600 { |
| regulator-name = "8019_l7"; |
| reg = <0x4600 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4700 { |
| regulator-name = "8019_l8"; |
| reg = <0x4700 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4800 { |
| regulator-name = "8019_l9"; |
| reg = <0x4800 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4900 { |
| regulator-name = "8019_l10"; |
| reg = <0x4900 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4a00 { |
| regulator-name = "8019_l11"; |
| reg = <0x4a00 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4b00 { |
| regulator-name = "8019_l12"; |
| reg = <0x4b00 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4c00 { |
| regulator-name = "8019_l13"; |
| reg = <0x4c00 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4d00 { |
| regulator-name = "8019_l14"; |
| reg = <0x4d00 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4e00 { |
| regulator-name = "8019_ldo_xo"; |
| reg = <0x4e00 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| |
| regulator@4f00 { |
| regulator-name = "8019_ldo_rfclk"; |
| reg = <0x4f00 0x100>; |
| compatible = "qcom,qpnp-regulator"; |
| status = "disabled"; |
| }; |
| }; |
| }; |