[PATCH] ppc32: Remove board support for ASH
Support for the ASH board is no longer maintained and thus being removed
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/arch/ppc/boot/simple/embed_config.c b/arch/ppc/boot/simple/embed_config.c
index c342b47..8dd5fb0 100644
--- a/arch/ppc/boot/simple/embed_config.c
+++ b/arch/ppc/boot/simple/embed_config.c
@@ -784,7 +784,7 @@
#ifdef CONFIG_IBM_OPENBIOS
/* This could possibly work for all treeboot roms.
*/
-#if defined(CONFIG_ASH) || defined(CONFIG_BEECH) || defined(CONFIG_BUBINGA)
+#if defined(CONFIG_BEECH) || defined(CONFIG_BUBINGA)
#define BOARD_INFO_VECTOR 0xFFF80B50 /* openbios 1.19 moved this vector down - armin */
#else
#define BOARD_INFO_VECTOR 0xFFFE0B50
diff --git a/arch/ppc/configs/ash_defconfig b/arch/ppc/configs/ash_defconfig
deleted file mode 100644
index c4a73cc..0000000
--- a/arch/ppc/configs/ash_defconfig
+++ /dev/null
@@ -1,666 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_ASH=y
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_EVB405EP is not set
-# CONFIG_OAK is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-# CONFIG_WALNUT is not set
-CONFIG_NP405H=y
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_IBM_OCP=y
-CONFIG_PPC_OCP=y
-CONFIG_IBM_OPENBIOS=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=64
-CONFIG_IBM_EMAC_TXB=8
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_ISA is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
index 805dd98..a7eaba9 100644
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -16,11 +16,6 @@
depends on 40x
default WALNUT
-config ASH
- bool "Ash"
- help
- This option enables support for the IBM NP405H evaluation board.
-
config BUBINGA
bool "Bubinga"
select WANT_EARLY_SERIAL
diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile
index 844c3b5..f00e0d0 100644
--- a/arch/ppc/platforms/4xx/Makefile
+++ b/arch/ppc/platforms/4xx/Makefile
@@ -1,7 +1,6 @@
#
# Makefile for the PowerPC 4xx linux kernel.
-obj-$(CONFIG_ASH) += ash.o
obj-$(CONFIG_BAMBOO) += bamboo.o
obj-$(CONFIG_CPCI405) += cpci405.o
obj-$(CONFIG_EBONY) += ebony.o
diff --git a/arch/ppc/platforms/4xx/ash.c b/arch/ppc/platforms/4xx/ash.c
deleted file mode 100644
index ce29117..0000000
--- a/arch/ppc/platforms/4xx/ash.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * arch/ppc/platforms/4xx/ash.c
- *
- * Support for the IBM NP405H ash eval board
- *
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/pagemap.h>
-#include <linux/pci.h>
-
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/io.h>
-#include <asm/ocp.h>
-#include <asm/ibm_ocp_pci.h>
-#include <asm/todc.h>
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-void *ash_rtc_base;
-
-/* Some IRQs unique to Walnut.
- * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
- */
-int __init
-ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
- static char pci_irq_table[][4] =
- /*
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {
- {24, 24, 24, 24}, /* IDSEL 1 - PCI slot 1 */
- {25, 25, 25, 25}, /* IDSEL 2 - PCI slot 2 */
- {26, 26, 26, 26}, /* IDSEL 3 - PCI slot 3 */
- {27, 27, 27, 27}, /* IDSEL 4 - PCI slot 4 */
- };
-
- const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
- return PCI_IRQ_TABLE_LOOKUP;
-}
-
-void __init
-ash_setup_arch(void)
-{
- ppc4xx_setup_arch();
-
- ibm_ocp_set_emac(0, 3);
-
-#ifdef CONFIG_DEBUG_BRINGUP
- int i;
- printk("\n");
- printk("machine\t: %s\n", PPC4xx_MACHINE_NAME);
- printk("\n");
- printk("bi_s_version\t %s\n", bip->bi_s_version);
- printk("bi_r_version\t %s\n", bip->bi_r_version);
- printk("bi_memsize\t 0x%8.8x\t %dMBytes\n", bip->bi_memsize,
- bip->bi_memsize / (1024 * 1000));
- for (i = 0; i < EMAC_NUMS; i++) {
- printk("bi_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", i,
- bip->bi_enetaddr[i][0], bip->bi_enetaddr[i][1],
- bip->bi_enetaddr[i][2], bip->bi_enetaddr[i][3],
- bip->bi_enetaddr[i][4], bip->bi_enetaddr[i][5]);
- }
- printk("bi_pci_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", 0,
- bip->bi_pci_enetaddr[0], bip->bi_pci_enetaddr[1],
- bip->bi_pci_enetaddr[2], bip->bi_pci_enetaddr[3],
- bip->bi_pci_enetaddr[4], bip->bi_pci_enetaddr[5]);
-
- printk("bi_intfreq\t 0x%8.8x\t clock:\t %dMhz\n",
- bip->bi_intfreq, bip->bi_intfreq / 1000000);
-
- printk("bi_busfreq\t 0x%8.8x\t plb bus clock:\t %dMHz\n",
- bip->bi_busfreq, bip->bi_busfreq / 1000000);
- printk("bi_pci_busfreq\t 0x%8.8x\t pci bus clock:\t %dMHz\n",
- bip->bi_pci_busfreq, bip->bi_pci_busfreq / 1000000);
-
- printk("\n");
-#endif
- /* RTC step for ash */
- ash_rtc_base = (void *) ASH_RTC_VADDR;
- TODC_INIT(TODC_TYPE_DS1743, ash_rtc_base, ash_rtc_base, ash_rtc_base,
- 8);
-}
-
-void __init
-bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
-{
- /*
- * Expected PCI mapping:
- *
- * PLB addr PCI memory addr
- * --------------------- ---------------------
- * 0000'0000 - 7fff'ffff <--- 0000'0000 - 7fff'ffff
- * 8000'0000 - Bfff'ffff ---> 8000'0000 - Bfff'ffff
- *
- * PLB addr PCI io addr
- * --------------------- ---------------------
- * e800'0000 - e800'ffff ---> 0000'0000 - 0001'0000
- *
- * The following code is simplified by assuming that the bootrom
- * has been well behaved in following this mapping.
- */
-
-#ifdef DEBUG
- int i;
-
- printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
- printk("PCI bridge regs before fixup \n");
- for (i = 0; i <= 2; i++) {
- printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
- printk(" pmm%dla\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
- printk(" pmm%dpcila\t0x%x\n", i,
- in_le32(&(pcip->pmm[i].pcila)));
- printk(" pmm%dpciha\t0x%x\n", i,
- in_le32(&(pcip->pmm[i].pciha)));
- }
- printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
- printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
- printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
- printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
- for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
- early_read_config_dword(hose, hose->first_busno,
- PCI_FUNC(hose->first_busno), bar,
- &bar_response);
- DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
- hose->first_busno, PCI_SLOT(hose->first_busno),
- PCI_FUNC(hose->first_busno), bar, bar_response);
- }
-
-#endif
- if (ppc_md.progress)
- ppc_md.progress("bios_fixup(): enter", 0x800);
-
- /* added for IBM boot rom version 1.15 bios bar changes -AK */
-
- /* Disable region first */
- out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
- /* PLB starting addr, PCI: 0x80000000 */
- out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
- /* PCI start addr, 0x80000000 */
- out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
- /* 512MB range of PLB to PCI */
- out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
- /* Enable no pre-fetch, enable region */
- out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
- (PPC405_PCI_UPPER_MEM -
- PPC405_PCI_MEM_BASE)) | 0x01));
-
- /* Disable region one */
- out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
- out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
- out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
- out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
- out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-
- /* Disable region two */
- out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
- out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
- out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
- out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
- out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-
- /* Enable PTM1 and PTM2, mapped to PLB address 0. */
-
- out_le32((void *) &(pcip->ptm1la), 0x00000000);
- out_le32((void *) &(pcip->ptm1ms), 0x00000001);
- out_le32((void *) &(pcip->ptm2la), 0x00000000);
- out_le32((void *) &(pcip->ptm2ms), 0x00000001);
-
- /* Write zero to PTM1 BAR. */
-
- early_write_config_dword(hose, hose->first_busno,
- PCI_FUNC(hose->first_busno),
- PCI_BASE_ADDRESS_1,
- 0x00000000);
-
- /* Disable PTM2 (unused) */
-
- out_le32((void *) &(pcip->ptm2la), 0x00000000);
- out_le32((void *) &(pcip->ptm2ms), 0x00000000);
-
- /* end work arround */
- if (ppc_md.progress)
- ppc_md.progress("bios_fixup(): done", 0x800);
-
-#ifdef DEBUG
- printk("PCI bridge regs after fixup \n");
- for (i = 0; i <= 2; i++) {
- printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
- printk(" pmm%dla\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
- printk(" pmm%dpcila\t0x%x\n", i,
- in_le32(&(pcip->pmm[i].pcila)));
- printk(" pmm%dpciha\t0x%x\n", i,
- in_le32(&(pcip->pmm[i].pciha)));
- }
- printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
- printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
- printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
- printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-
- for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
- early_read_config_dword(hose, hose->first_busno,
- PCI_FUNC(hose->first_busno), bar,
- &bar_response);
- DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
- hose->first_busno, PCI_SLOT(hose->first_busno),
- PCI_FUNC(hose->first_busno), bar, bar_response);
- }
-
-
-#endif
-}
-
-void __init
-ash_map_io(void)
-{
- ppc4xx_map_io();
- io_block_mapping(ASH_RTC_VADDR, ASH_RTC_PADDR, ASH_RTC_SIZE, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7)
-{
- ppc4xx_init(r3, r4, r5, r6, r7);
-
- ppc_md.setup_arch = ash_setup_arch;
- ppc_md.setup_io_mappings = ash_map_io;
-
-#ifdef CONFIG_PPC_RTC
- ppc_md.time_init = todc_time_init;
- ppc_md.set_rtc_time = todc_set_rtc_time;
- ppc_md.get_rtc_time = todc_get_rtc_time;
- ppc_md.nvram_read_val = todc_direct_read_val;
- ppc_md.nvram_write_val = todc_direct_write_val;
-#endif
-}
diff --git a/arch/ppc/platforms/4xx/ash.h b/arch/ppc/platforms/4xx/ash.h
deleted file mode 100644
index 5f7448e..0000000
--- a/arch/ppc/platforms/4xx/ash.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * arch/ppc/platforms/4xx/ash.h
- *
- * Macros, definitions, and data structures specific to the IBM PowerPC
- * Ash eval board.
- *
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2000-2002 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_ASH_H__
-#define __ASM_ASH_H__
-#include <platforms/4xx/ibmnp405h.h>
-
-#ifndef __ASSEMBLY__
-/*
- * Data structure defining board information maintained by the boot
- * ROM on IBM's "Ash" evaluation board. An effort has been made to
- * keep the field names consistent with the 8xx 'bd_t' board info
- * structures.
- */
-
-typedef struct board_info {
- unsigned char bi_s_version[4]; /* Version of this structure */
- unsigned char bi_r_version[30]; /* Version of the IBM ROM */
- unsigned int bi_memsize; /* DRAM installed, in bytes */
- unsigned char bi_enetaddr[4][6]; /* Local Ethernet MAC address */
- unsigned char bi_pci_enetaddr[6];
- unsigned int bi_intfreq; /* Processor speed, in Hz */
- unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
- unsigned int bi_pci_busfreq; /* PCI speed in Hz */
-} bd_t;
-
-/* Some 4xx parts use a different timebase frequency from the internal clock.
-*/
-#define bi_tbfreq bi_intfreq
-
-/* Memory map for the IBM "Ash" NP405H evaluation board.
- */
-
-extern void *ash_rtc_base;
-#define ASH_RTC_PADDR ((uint)0xf0000000)
-#define ASH_RTC_VADDR ASH_RTC_PADDR
-#define ASH_RTC_SIZE ((uint)8*1024)
-
-
-/* Early initialization address mapping for block_io.
- * Standard 405GP map.
- */
-#define PPC4xx_PCI_IO_PADDR ((uint)PPC405_PCI_PHY_IO_BASE)
-#define PPC4xx_PCI_IO_VADDR PPC4xx_PCI_IO_PADDR
-#define PPC4xx_PCI_IO_SIZE ((uint)64*1024)
-#define PPC4xx_PCI_CFG_PADDR ((uint)PPC405_PCI_CONFIG_ADDR)
-#define PPC4xx_PCI_CFG_VADDR PPC4xx_PCI_CFG_PADDR
-#define PPC4xx_PCI_CFG_SIZE ((uint)4*1024)
-#define PPC4xx_PCI_LCFG_PADDR ((uint)0xef400000)
-#define PPC4xx_PCI_LCFG_VADDR PPC4xx_PCI_LCFG_PADDR
-#define PPC4xx_PCI_LCFG_SIZE ((uint)4*1024)
-#define PPC4xx_ONB_IO_PADDR ((uint)0xef600000)
-#define PPC4xx_ONB_IO_VADDR PPC4xx_ONB_IO_PADDR
-#define PPC4xx_ONB_IO_SIZE ((uint)4*1024)
-
-#define NR_BOARD_IRQS 32
-
-#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
-#define BASE_BAUD 201600
-#else
-#define BASE_BAUD 691200
-#endif
-
-#define PPC4xx_MACHINE_NAME "IBM NP405H Ash"
-
-extern char pci_irq_table[][4];
-
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __ASM_ASH_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/ppc4xx_setup.c b/arch/ppc/syslib/ppc4xx_setup.c
index e170aeb..795b966 100644
--- a/arch/ppc/syslib/ppc4xx_setup.c
+++ b/arch/ppc/syslib/ppc4xx_setup.c
@@ -171,7 +171,7 @@
unsigned int freq;
bd_t *bip = &__res;
-#if defined(CONFIG_WALNUT) || defined(CONFIG_ASH) || defined(CONFIG_SYCAMORE)
+#if defined(CONFIG_WALNUT) || defined(CONFIG_SYCAMORE)
/* Walnut boot rom sets DCR CHCR1 (aka CPC0_CR1) bit CETE to 1 */
mtdcr(DCRN_CHCR1, mfdcr(DCRN_CHCR1) & ~CHR1_CETE);
#endif
diff --git a/include/asm-ppc/ibm4xx.h b/include/asm-ppc/ibm4xx.h
index e807be9..d6852fa 100644
--- a/include/asm-ppc/ibm4xx.h
+++ b/include/asm-ppc/ibm4xx.h
@@ -19,10 +19,6 @@
#ifdef CONFIG_40x
-#if defined(CONFIG_ASH)
-#include <platforms/4xx/ash.h>
-#endif
-
#if defined(CONFIG_BUBINGA)
#include <platforms/4xx/bubinga.h>
#endif