diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index ceddcff..e638e15 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -1,3 +1,46 @@
+What:		/sys/bus/pci/drivers/.../bind
+Date:		December 2003
+Contact:	linux-pci@vger.kernel.org
+Description:
+		Writing a device location to this file will cause
+		the driver to attempt to bind to the device found at
+		this location.	This is useful for overriding default
+		bindings.  The format for the location is: DDDD:BB:DD.F.
+		That is Domain:Bus:Device.Function and is the same as
+		found in /sys/bus/pci/devices/.  For example:
+		# echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind
+		(Note: kernels before 2.6.28 may require echo -n).
+
+What:		/sys/bus/pci/drivers/.../unbind
+Date:		December 2003
+Contact:	linux-pci@vger.kernel.org
+Description:
+		Writing a device location to this file will cause the
+		driver to attempt to unbind from the device found at
+		this location.	This may be useful when overriding default
+		bindings.  The format for the location is: DDDD:BB:DD.F.
+		That is Domain:Bus:Device.Function and is the same as
+		found in /sys/bus/pci/devices/. For example:
+		# echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind
+		(Note: kernels before 2.6.28 may require echo -n).
+
+What:		/sys/bus/pci/drivers/.../new_id
+Date:		December 2003
+Contact:	linux-pci@vger.kernel.org
+Description:
+		Writing a device ID to this file will attempt to
+		dynamically add a new device ID to a PCI device driver.
+		This may allow the driver to support more hardware than
+		was included in the driver's static device ID support
+		table at compile time.  The format for the device ID is:
+		VVVV DDDD SVVV SDDD CCCC MMMM PPPP.  That is Vendor ID,
+		Device ID, Subsystem Vendor ID, Subsystem Device ID,
+		Class, Class Mask, and Private Driver Data.  The Vendor ID
+		and Device ID fields are required, the rest are optional.
+		Upon successfully adding an ID, the driver will probe
+		for the device and attempt to bind to it.  For example:
+		# echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id
+
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
 Contact:	Ben Hutchings <bhutchings@solarflare.com>
diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt
index 6e25340..accfe2f 100644
--- a/Documentation/RCU/checklist.txt
+++ b/Documentation/RCU/checklist.txt
@@ -298,3 +298,15 @@
 
 	Note that, rcu_assign_pointer() and rcu_dereference() relate to
 	SRCU just as they do to other forms of RCU.
+
+15.	The whole point of call_rcu(), synchronize_rcu(), and friends
+	is to wait until all pre-existing readers have finished before
+	carrying out some otherwise-destructive operation.  It is
+	therefore critically important to -first- remove any path
+	that readers can follow that could be affected by the
+	destructive operation, and -only- -then- invoke call_rcu(),
+	synchronize_rcu(), or friends.
+
+	Because these primitives only wait for pre-existing readers,
+	it is the caller's responsibility to guarantee safety to
+	any subsequent readers.
diff --git a/Documentation/dvb/README.flexcop b/Documentation/dvb/README.flexcop
deleted file mode 100644
index 5515469..0000000
--- a/Documentation/dvb/README.flexcop
+++ /dev/null
@@ -1,205 +0,0 @@
-This README escorted the skystar2-driver rewriting procedure. It describes the
-state of the new flexcop-driver set and some internals are written down here
-too.
-
-This document hopefully describes things about the flexcop and its
-device-offsprings. Goal was to write an easy-to-write and easy-to-read set of
-drivers based on the skystar2.c and other information.
-
-Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been
-touched and rewritten.
-
-History & News
-==============
-  2005-04-01 - correct USB ISOC transfers (thanks to Vadim Catana)
-
-
-
-
-General coding processing
-=========================
-
-We should proceed as follows (as long as no one complains):
-
-0) Think before start writing code!
-
-1) rewriting the skystar2.c with the help of the flexcop register descriptions
-and splitting up the files to a pci-bus-part and a flexcop-part.
-The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the
-device-specific part and b2c2-flexcop.ko for the common flexcop-functions.
-
-2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c
-and other pci drivers)
-
-3) make some beautification (see 'Improvements when rewriting (refactoring) is
-done')
-
-4) Testing the new driver and maybe substitute the skystar2.c with it, to reach
-a wider tester audience.
-
-5) creating an usb-bus-part using the already written flexcop code for the pci
-card.
-
-Idea: create a kernel-object for the flexcop and export all important
-functions. This option saves kernel-memory, but maybe a lot of functions have
-to be exported to kernel namespace.
-
-
-Current situation
-=================
-
-0) Done :)
-1) Done (some minor issues left)
-2) Done
-3) Not ready yet, more information is necessary
-4) next to be done (see the table below)
-5) USB driver is working (yes, there are some minor issues)
-
-What seems to be ready?
------------------------
-
-1) Rewriting
-1a) i2c is cut off from the flexcop-pci.c and seems to work
-1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c
-1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c
-1e) eeprom (reading MAC address)
-1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me))
-1f) misc. register accesses for reading parameters (e.g. resetting, revision)
-1g) pid/mac filter (flexcop-hw-filter.c)
-1i) dvb-stuff initialization in flexcop.c (done)
-1h) dma stuff (now just using the size-irq, instead of all-together, to be done)
-1j) remove flexcop initialization from flexcop-pci.c completely (done)
-1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO')
-1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from
-non-static where possible, moved code to proper places)
-
-2) Search for errors in the leftover of flexcop-pci.c (partially done)
-5a) add MAC address reading
-5c) feeding of ISOC data to the software demux (format of the isochronous data
-and speed optimization, no real error) (thanks to Vadim Catana)
-
-What to do in the near future?
---------------------------------------
-(no special order here)
-
-5) USB driver
-5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting)
-
-Testing changes
----------------
-
-O             = item is working
-P             = item is partially working
-X             = item is not working
-N             = item does not apply here
-<empty field> = item need to be examined
-
-       | PCI                               | USB
-item   | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312
--------+-------+---------+---------+-------+-------+---------+---------+-------
-1a)    | O     |         |         |       | N     | N       | N       | N
-1b)    | O     |         |         |       |       |         | O       |
-1c)    | N     | N       |         |       | N     | N       | O       |
-1d)    |                 O                 |                 O
-1e)    |                 O                 |                 O
-1f)    |                                   P
-1g)    |                                   O
-1h)    |                 P                 |
-1i)    |                 O                 |                 N
-1j)    |                 O                 |                 N
-1l)    |                 O                 |                 N
-2)     |                 O                 |                 N
-5a)    |                 N                 |                 O
-5b)*   |                 N                 |
-5c)    |                 N                 |                 O
-
-* - not done yet
-
-Known bugs and problems and TODO
---------------------------------
-
-1g/h/l) when pid filtering is enabled on the pci card
-
-DMA usage currently:
-  The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first
-  address and triggers an IRQ when it's full and starts writing to the second
-  address. When the second address is full, the IRQ is triggered again, and
-  the flexcop writes to first address again, and so on.
-  The buffersize of each address is currently 640*188 bytes.
-
-  Problem is, when using hw-pid-filtering and doing some low-bandwidth
-  operation (like scanning) the buffers won't be filled enough to trigger
-  the IRQ. That's why:
-
-  When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ
-  is triggered.  Is the current write address of DMA1 different to the one
-  during the last IRQ, then the data is passed to the demuxer.
-
-  There is an additional DMA-IRQ-method: packet count IRQ. This isn't
-  implemented correctly yet.
-
-  The solution is to disable HW PID filtering, but I don't know how the DVB
-  API software demux behaves on slow systems with 45MBit/s TS.
-
-Solved bugs :)
---------------
-1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't
-working)
-SOLUTION: also index 0 was affected, because net_translation is done for
-these indexes by default
-
-5b) isochronous transfer does only work in the first attempt (for the Sky2PC
-USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really
-woke up again (don't know if this need fixes, see
-flexcop-fe-tuner.c:flexcop_sleep)
-
-NEWS: when the driver is loaded and unloaded and loaded again (w/o doing
-anything in the while the driver is loaded the first time), no transfers take
-place anymore.
-
-Improvements when rewriting (refactoring) is done
-=================================================
-
-- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control
-  (enable sleeping for other demods than dvb-s)
-- add support for CableStar (stv0297 Microtune 203x/ALPS) (almost done, incompatibilities with the Nexus-CA)
-
-Debugging
----------
-- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it
-  with this flexcop, this is important, because i2c is now using the
-  flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for
-  that, please tell us so).
-
-Everything which is identical in the following table, can be put into a common
-flexcop-module.
-
-		  PCI                  USB
--------------------------------------------------------------------------------
-Different:
-Register access:  accessing IO memory  USB control message
-I2C bus:          I2C bus of the FC    USB control message
-Data transfer:    DMA                  isochronous transfer
-EEPROM transfer:  through i2c bus      not clear yet
-
-Identical:
-Streaming:                 accessing registers
-PID Filtering:             accessing registers
-Sram destinations:         accessing registers
-Tuner/Demod:                     I2C bus
-DVB-stuff:            can be written for common use
-
-Acknowledgements (just for the rewriting part)
-================
-
-Bjarne Steinsbo thought a lot in the first place of the pci part for this code
-sharing idea.
-
-Andreas Oberritter for providing a recent PCI initialization template
-(pluto2.c).
-
-Boleslaw Ciesielski for pointing out a problem with firmware loader.
-
-Vadim Catana for correcting the USB transfer.
-
-comments, critics and ideas to linux-dvb@linuxtv.org.
diff --git a/Documentation/dvb/technisat.txt b/Documentation/dvb/technisat.txt
index cdf6ee4..3f435ff 100644
--- a/Documentation/dvb/technisat.txt
+++ b/Documentation/dvb/technisat.txt
@@ -1,5 +1,5 @@
-How to set up the Technisat devices
-===================================
+How to set up the Technisat/B2C2 Flexcop devices
+================================================
 
 1) Find out what device you have
 ================================
@@ -16,54 +16,60 @@
 
 If the Technisat is the only TV device in your box get rid of unnecessary modules and check this one:
 "Multimedia devices" => "Customise analog and hybrid tuner modules to build"
-In this directory uncheck every driver which is activated there.
+In this directory uncheck every driver which is activated there (except "Simple tuner support" for case 9 only).
 
 Then please activate:
 2a) Main module part:
 
 a.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters"
-b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card OR
+b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card
+OR
 c.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC USB" in case of an USB 1.1 adapter
 d.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Enable debug for the B2C2 FlexCop drivers"
 Notice: d.) is helpful for troubleshooting
 
 2b) Frontend module part:
 
-1.) Revision 2.3:
+1.) SkyStar DVB-S Revision 2.3:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink VP310/MT312/ZL10313 based"
 
-2.) Revision 2.6:
+2.) SkyStar DVB-S Revision 2.6:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0299 based"
 
-3.) Revision 2.7:
+3.) SkyStar DVB-S Revision 2.7:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "Samsung S5H1420 based"
 c.)"Multimedia devices" => "Customise DVB frontends" => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS"
 d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller"
 
-4.) Revision 2.8:
+4.) SkyStar DVB-S Revision 2.8:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24113/CX24128 tuner for DVB-S/DSS"
 c.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24123 based"
 d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller"
 
-5.) DVB-T card:
+5.) AirStar DVB-T card:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink MT352 based"
 
-6.) DVB-C card:
+6.) CableStar DVB-C card:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0297 based"
 
-7.) ATSC card 1st generation:
+7.) AirStar ATSC card 1st generation:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "Broadcom BCM3510"
 
-8.) ATSC card 2nd generation:
+8.) AirStar ATSC card 2nd generation:
 a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
 b.)"Multimedia devices" => "Customise DVB frontends" => "NxtWave Communications NXT2002/NXT2004 based"
-c.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based"
+c.)"Multimedia devices" => "Customise DVB frontends" => "Generic I2C PLL based tuners"
 
-Author: Uwe Bugla <uwe.bugla@gmx.de> December 2008
+9.) AirStar ATSC card 3rd generation:
+a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
+b.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based"
+c.)"Multimedia devices" => "Customise analog and hybrid tuner modules to build" => "Simple tuner support"
+
+Author: Uwe Bugla <uwe.bugla@gmx.de> February 2009
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 5ddbe35..20d3b94 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -335,3 +335,12 @@
 	Secmark, it is time to deprecate the older mechanism and start the
 	process of removing the old code.
 Who:	Paul Moore <paul.moore@hp.com>
+---------------------------
+
+What:	sysfs ui for changing p4-clockmod parameters
+When:	September 2009
+Why:	See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
+	e088e4c9cdb618675874becb91b2fd581ee707e6.
+	Removal is subject to fixing any remaining bugs in ACPI which may
+	cause the thermal throttling not to happen at the right time.
+Who:	Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>
diff --git a/Documentation/filesystems/ext2.txt b/Documentation/filesystems/ext2.txt
index 4333e83..2344855 100644
--- a/Documentation/filesystems/ext2.txt
+++ b/Documentation/filesystems/ext2.txt
@@ -373,10 +373,10 @@
 Compression (*)		http://e2compr.sourceforge.net/
 
 Implementations for:
-Windows 95/98/NT/2000	http://uranus.it.swin.edu.au/~jn/linux/Explore2fs.htm
-Windows 95 (*)		http://www.yipton.demon.co.uk/content.html#FSDEXT2
+Windows 95/98/NT/2000	http://www.chrysocome.net/explore2fs
+Windows 95 (*)		http://www.yipton.net/content.html#FSDEXT2
 DOS client (*)		ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
-OS/2			http://perso.wanadoo.fr/matthieu.willm/ext2-os2/
-RISC OS client		ftp://ftp.barnet.ac.uk/pub/acorn/armlinux/iscafs/
+OS/2 (*)		ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
+RISC OS client		http://www.esw-heim.tu-clausthal.de/~marco/smorbrod/IscaFS/
 
-(*) no longer actively developed/supported (as of Apr 2001)
+(*) no longer actively developed/supported (as of Mar 2009)
diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt
index 9dd2a3b..e5f3833 100644
--- a/Documentation/filesystems/ext3.txt
+++ b/Documentation/filesystems/ext3.txt
@@ -198,5 +198,5 @@
 programs: 	http://e2fsprogs.sourceforge.net/
 		http://ext2resize.sourceforge.net
 
-useful links:	http://www-106.ibm.com/developerworks/linux/library/l-fs7/
-		http://www-106.ibm.com/developerworks/linux/library/l-fs8/
+useful links:	http://www.ibm.com/developerworks/library/l-fs7.html
+		http://www.ibm.com/developerworks/library/l-fs8.html
diff --git a/Documentation/filesystems/squashfs.txt b/Documentation/filesystems/squashfs.txt
index 3e79e4a..b324c03 100644
--- a/Documentation/filesystems/squashfs.txt
+++ b/Documentation/filesystems/squashfs.txt
@@ -22,7 +22,7 @@
 
 				Squashfs		Cramfs
 
-Max filesystem size:		2^64			16 MiB
+Max filesystem size:		2^64			256 MiB
 Max file size:			~ 2 TiB			16 MiB
 Max files:			unlimited		unlimited
 Max directories:		unlimited		unlimited
diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90
index 0e84117..93d8e3d 100644
--- a/Documentation/hwmon/lm90
+++ b/Documentation/hwmon/lm90
@@ -42,6 +42,11 @@
     Addresses scanned: I2C 0x4e
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
+  * Maxim MAX6648
+    Prefix: 'max6646'
+    Addresses scanned: I2C 0x4c
+    Datasheet: Publicly available at the Maxim website
+               http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
   * Maxim MAX6649
     Prefix: 'max6646'
     Addresses scanned: I2C 0x4c
@@ -74,6 +79,11 @@
                            0x4c, 0x4d and 0x4e
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370
+  * Maxim MAX6692
+    Prefix: 'max6646'
+    Addresses scanned: I2C 0x4c
+    Datasheet: Publicly available at the Maxim website
+               http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
 
 
 Author: Jean Delvare <khali@linux-fr.org>
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 319785b..54f21a5 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -114,7 +114,7 @@
 Parameters denoted with BOOT are actually interpreted by the boot
 loader, and have no meaning to the kernel directly.
 Do not modify the syntax of boot loader parameters without extreme
-need or coordination with <Documentation/x86/i386/boot.txt>.
+need or coordination with <Documentation/x86/boot.txt>.
 
 There are also arch-specific kernel-parameters not documented here.
 See for example <Documentation/x86/x86_64/boot-options.txt>.
@@ -868,8 +868,10 @@
 	icn=		[HW,ISDN]
 			Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
 
-	ide=		[HW] (E)IDE subsystem
-			Format: ide=nodma or ide=doubler
+	ide-core.nodma=	[HW] (E)IDE subsystem
+			Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc
+			.vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom
+			.chs .ignore_cable are additional options
 			See Documentation/ide/ide.txt.
 
 	idebus=		[HW] (E)IDE subsystem - VLB/PCI bus speed
@@ -2449,7 +2451,7 @@
 			See Documentation/fb/modedb.txt.
 
 	vga=		[BOOT,X86-32] Select a particular video mode
-			See Documentation/x86/i386/boot.txt and
+			See Documentation/x86/boot.txt and
 			Documentation/svga.txt.
 			Use vga=ask for menu.
 			This is actually a boot loader parameter; the value is
diff --git a/Documentation/networking/ipv6.txt b/Documentation/networking/ipv6.txt
new file mode 100644
index 0000000..268e5c1
--- /dev/null
+++ b/Documentation/networking/ipv6.txt
@@ -0,0 +1,35 @@
+
+Options for the ipv6 module are supplied as parameters at load time.
+
+Module options may be given as command line arguments to the insmod
+or modprobe command, but are usually specified in either the
+/etc/modules.conf or /etc/modprobe.conf configuration file, or in a
+distro-specific configuration file.
+
+The available ipv6 module parameters are listed below.  If a parameter
+is not specified the default value is used.
+
+The parameters are as follows:
+
+disable
+
+	Specifies whether to load the IPv6 module, but disable all
+	its functionality.  This might be used when another module
+	has a dependency on the IPv6 module being loaded, but no
+	IPv6 addresses or operations are desired.
+
+	The possible values and their effects are:
+
+	0
+		IPv6 is enabled.
+
+		This is the default value.
+
+	1
+		IPv6 is disabled.
+
+		No IPv6 addresses will be added to interfaces, and
+		it will not be possible to open an IPv6 socket.
+
+		A reboot is required to enable IPv6.
+
diff --git a/Documentation/scheduler/00-INDEX b/Documentation/scheduler/00-INDEX
index aabcc3a..3c00c9c 100644
--- a/Documentation/scheduler/00-INDEX
+++ b/Documentation/scheduler/00-INDEX
@@ -2,8 +2,6 @@
 	- this file.
 sched-arch.txt
 	- CPU Scheduler implementation hints for architecture specific code.
-sched-coding.txt
-	- reference for various scheduler-related methods in the O(1) scheduler.
 sched-design-CFS.txt
 	- goals, design and implementation of the Complete Fair Scheduler.
 sched-domains.txt
diff --git a/Documentation/scheduler/sched-coding.txt b/Documentation/scheduler/sched-coding.txt
deleted file mode 100644
index cbd8db7..0000000
--- a/Documentation/scheduler/sched-coding.txt
+++ /dev/null
@@ -1,126 +0,0 @@
-     Reference for various scheduler-related methods in the O(1) scheduler
-		Robert Love <rml@tech9.net>, MontaVista Software
-
-
-Note most of these methods are local to kernel/sched.c - this is by design.
-The scheduler is meant to be self-contained and abstracted away.  This document
-is primarily for understanding the scheduler, not interfacing to it.  Some of
-the discussed interfaces, however, are general process/scheduling methods.
-They are typically defined in include/linux/sched.h.
-
-
-Main Scheduling Methods
------------------------
-
-void load_balance(runqueue_t *this_rq, int idle)
-	Attempts to pull tasks from one cpu to another to balance cpu usage,
-	if needed.  This method is called explicitly if the runqueues are
-	imbalanced or periodically by the timer tick.  Prior to calling,
-	the current runqueue must be locked and interrupts disabled.
-
-void schedule()
-	The main scheduling function.  Upon return, the highest priority
-	process will be active.
-
-
-Locking
--------
-
-Each runqueue has its own lock, rq->lock.  When multiple runqueues need
-to be locked, lock acquires must be ordered by ascending &runqueue value.
-
-A specific runqueue is locked via
-
-	task_rq_lock(task_t pid, unsigned long *flags)
-
-which disables preemption, disables interrupts, and locks the runqueue pid is
-running on.  Likewise,
-
-	task_rq_unlock(task_t pid, unsigned long *flags)
-
-unlocks the runqueue pid is running on, restores interrupts to their previous
-state, and reenables preemption.
-
-The routines
-
-	double_rq_lock(runqueue_t *rq1, runqueue_t *rq2)
-
-and
-
-	double_rq_unlock(runqueue_t *rq1, runqueue_t *rq2)
-
-safely lock and unlock, respectively, the two specified runqueues.  They do
-not, however, disable and restore interrupts.  Users are required to do so
-manually before and after calls.
-
-
-Values
-------
-
-MAX_PRIO
-	The maximum priority of the system, stored in the task as task->prio.
-	Lower priorities are higher.  Normal (non-RT) priorities range from
-	MAX_RT_PRIO to (MAX_PRIO - 1).
-MAX_RT_PRIO
-	The maximum real-time priority of the system.  Valid RT priorities
-	range from 0 to (MAX_RT_PRIO - 1).
-MAX_USER_RT_PRIO
-	The maximum real-time priority that is exported to user-space.  Should
-	always be equal to or less than MAX_RT_PRIO.  Setting it less allows
-	kernel threads to have higher priorities than any user-space task.
-MIN_TIMESLICE
-MAX_TIMESLICE
-	Respectively, the minimum and maximum timeslices (quanta) of a process.
-
-Data
-----
-
-struct runqueue
-	The main per-CPU runqueue data structure.
-struct task_struct
-	The main per-process data structure.
-
-
-General Methods
----------------
-
-cpu_rq(cpu)
-	Returns the runqueue of the specified cpu.
-this_rq()
-	Returns the runqueue of the current cpu.
-task_rq(pid)
-	Returns the runqueue which holds the specified pid.
-cpu_curr(cpu)
-	Returns the task currently running on the given cpu.
-rt_task(pid)
-	Returns true if pid is real-time, false if not.
-
-
-Process Control Methods
------------------------
-
-void set_user_nice(task_t *p, long nice)
-	Sets the "nice" value of task p to the given value.
-int setscheduler(pid_t pid, int policy, struct sched_param *param)
-	Sets the scheduling policy and parameters for the given pid.
-int set_cpus_allowed(task_t *p, unsigned long new_mask)
-	Sets a given task's CPU affinity and migrates it to a proper cpu.
-	Callers must have a valid reference to the task and assure the
-	task not exit prematurely.  No locks can be held during the call.
-set_task_state(tsk, state_value)
-	Sets the given task's state to the given value.
-set_current_state(state_value)
-	Sets the current task's state to the given value.
-void set_tsk_need_resched(struct task_struct *tsk)
-	Sets need_resched in the given task.
-void clear_tsk_need_resched(struct task_struct *tsk)
-	Clears need_resched in the given task.
-void set_need_resched()
-	Sets need_resched in the current task.
-void clear_need_resched()
-	Clears need_resched in the current task.
-int need_resched()
-	Returns true if need_resched is set in the current task, false
-	otherwise.
-yield()
-	Place the current process at the end of the runqueue and call schedule.
diff --git a/Documentation/scsi/cxgb3i.txt b/Documentation/scsi/cxgb3i.txt
index 8141fa0..7ac8032 100644
--- a/Documentation/scsi/cxgb3i.txt
+++ b/Documentation/scsi/cxgb3i.txt
@@ -4,7 +4,7 @@
 ============
 
 The Chelsio T3 ASIC based Adapters (S310, S320, S302, S304, Mezz cards, etc.
-series of products) supports iSCSI acceleration and iSCSI Direct Data Placement
+series of products) support iSCSI acceleration and iSCSI Direct Data Placement
 (DDP) where the hardware handles the expensive byte touching operations, such
 as CRC computation and verification, and direct DMA to the final host memory
 destination:
@@ -31,9 +31,9 @@
 	  the TCP segments onto the wire. It handles TCP retransmission if
 	  needed.
 
-	  On receving, S3 h/w recovers the iSCSI PDU by reassembling TCP
+	  On receiving, S3 h/w recovers the iSCSI PDU by reassembling TCP
 	  segments, separating the header and data, calculating and verifying
-	  the digests, then forwards the header to the host. The payload data,
+	  the digests, then forwarding the header to the host. The payload data,
 	  if possible, will be directly placed into the pre-posted host DDP
 	  buffer. Otherwise, the payload data will be sent to the host too.
 
@@ -68,9 +68,8 @@
 	sure the ip address is unique in the network.
 
 3. edit /etc/iscsi/iscsid.conf
-   The default setting for MaxRecvDataSegmentLength (131072) is too big,
-   replace "node.conn[0].iscsi.MaxRecvDataSegmentLength" to be a value no
-   bigger than 15360 (for example 8192):
+   The default setting for MaxRecvDataSegmentLength (131072) is too big;
+   replace with a value no bigger than 15360 (for example 8192):
 
 	node.conn[0].iscsi.MaxRecvDataSegmentLength = 8192
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 59fd2d1..61aeb5a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1469,8 +1469,6 @@
 S:	Supported
 
 DOCUMENTATION (/Documentation directory)
-P:	Michael Kerrisk
-M:	mtk.manpages@gmail.com
 P:	Randy Dunlap
 M:	rdunlap@xenotime.net
 L:	linux-doc@vger.kernel.org
@@ -2464,7 +2462,7 @@
 
 ISDN SUBSYSTEM
 P:	Karsten Keil
-M:	kkeil@suse.de
+M:	isdn@linux-pingi.de
 L:	isdn4linux@listserv.isdn4linux.de (subscribers-only)
 W:	http://www.isdn4linux.de
 T:	git kernel.org:/pub/scm/linux/kernel/kkeil/isdn-2.6.git
@@ -2879,7 +2877,7 @@
 M:	mtk.manpages@gmail.com
 W:	http://www.kernel.org/doc/man-pages
 L:	linux-man@vger.kernel.org
-S:	Supported
+S:	Maintained
 
 MARVELL LIBERTAS WIRELESS DRIVER
 P:	Dan Williams
diff --git a/Makefile b/Makefile
index df6ce3e..5a5b82e 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 29
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Erotic Pickled Herring
 
 # *DOCUMENTATION*
@@ -904,12 +904,18 @@
 # and if the SCM is know a tag from the SCM is appended.
 # The appended tag is determined by the SCM used.
 #
-# Currently, only git is supported.
-# Other SCMs can edit scripts/setlocalversion and add the appropriate
-# checks as needed.
+# .scmversion is used when generating rpm packages so we do not loose
+# the version information from the SCM when we do the build of the kernel
+# from the copied source
 ifdef CONFIG_LOCALVERSION_AUTO
-	_localver-auto = $(shell $(CONFIG_SHELL) \
-	                  $(srctree)/scripts/setlocalversion $(srctree))
+
+ifeq ($(wildcard .scmversion),)
+        _localver-auto = $(shell $(CONFIG_SHELL) \
+                         $(srctree)/scripts/setlocalversion $(srctree))
+else
+        _localver-auto = $(shell cat .scmversion 2> /dev/null)
+endif
+
 	localver-auto  = $(LOCALVERSION)$(_localver-auto)
 endif
 
@@ -1537,7 +1543,7 @@
       cmd_depmod = \
 	if [ -r System.map -a -x $(DEPMOD) ]; then                              \
 		$(DEPMOD) -ae -F System.map                                     \
-		$(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) -r)   \
+		$(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) )     \
 		$(KERNELRELEASE);                                               \
 	fi
 
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 7049815..68d6494 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -233,12 +233,13 @@
 	unsigned int cachetype = read_cpuid_cachetype();
 	unsigned int arch = cpu_architecture();
 
-	if (arch >= CPU_ARCH_ARMv7) {
-		cacheid = CACHEID_VIPT_NONALIASING;
-		if ((cachetype & (3 << 14)) == 1 << 14)
-			cacheid |= CACHEID_ASID_TAGGED;
-	} else if (arch >= CPU_ARCH_ARMv6) {
-		if (cachetype & (1 << 23))
+	if (arch >= CPU_ARCH_ARMv6) {
+		if ((cachetype & (7 << 29)) == 4 << 29) {
+			/* ARMv7 register format */
+			cacheid = CACHEID_VIPT_NONALIASING;
+			if ((cachetype & (3 << 14)) == 1 << 14)
+				cacheid |= CACHEID_ASID_TAGGED;
+		} else if (cachetype & (1 << 23))
 			cacheid = CACHEID_VIPT_ALIASING;
 		else
 			cacheid = CACHEID_VIPT_NONALIASING;
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 134af97..b7f2332 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -347,6 +347,111 @@
 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  Compact Flash (PCMCIA or IDE)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
+    defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+
+static struct at91_cf_data cf0_data;
+
+static struct resource cf0_resources[] = {
+	[0] = {
+		.start	= AT91_CHIPSELECT_4,
+		.end	= AT91_CHIPSELECT_4 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+	}
+};
+
+static struct platform_device cf0_device = {
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &cf0_data,
+	},
+	.resource	= cf0_resources,
+	.num_resources	= ARRAY_SIZE(cf0_resources),
+};
+
+static struct at91_cf_data cf1_data;
+
+static struct resource cf1_resources[] = {
+	[0] = {
+		.start	= AT91_CHIPSELECT_5,
+		.end	= AT91_CHIPSELECT_5 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+	}
+};
+
+static struct platform_device cf1_device = {
+	.id		= 1,
+	.dev		= {
+				.platform_data	= &cf1_data,
+	},
+	.resource	= cf1_resources,
+	.num_resources	= ARRAY_SIZE(cf1_resources),
+};
+
+void __init at91_add_device_cf(struct at91_cf_data *data)
+{
+	unsigned long ebi0_csa;
+	struct platform_device *pdev;
+
+	if (!data)
+		return;
+
+	/*
+	 * assign CS4 or CS5 to SMC with Compact Flash logic support,
+	 * we assume SMC timings are configured by board code,
+	 * except True IDE where timings are controlled by driver
+	 */
+	ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+	switch (data->chipselect) {
+	case 4:
+		at91_set_A_periph(AT91_PIN_PD6, 0);  /* EBI0_NCS4/CFCS0 */
+		ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1;
+		cf0_data = *data;
+		pdev = &cf0_device;
+		break;
+	case 5:
+		at91_set_A_periph(AT91_PIN_PD7, 0);  /* EBI0_NCS5/CFCS1 */
+		ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2;
+		cf1_data = *data;
+		pdev = &cf1_device;
+		break;
+	default:
+		printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
+		       data->chipselect);
+		return;
+	}
+	at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
+
+	if (data->det_pin) {
+		at91_set_gpio_input(data->det_pin, 1);
+		at91_set_deglitch(data->det_pin, 1);
+	}
+
+	if (data->irq_pin) {
+		at91_set_gpio_input(data->irq_pin, 1);
+		at91_set_deglitch(data->irq_pin, 1);
+	}
+
+	if (data->vcc_pin)
+		/* initially off */
+		at91_set_gpio_output(data->vcc_pin, 0);
+
+	/* enable EBI controlled pins */
+	at91_set_A_periph(AT91_PIN_PD5, 1);  /* NWAIT */
+	at91_set_A_periph(AT91_PIN_PD8, 0);  /* CFCE1 */
+	at91_set_A_periph(AT91_PIN_PD9, 0);  /* CFCE2 */
+	at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
+
+	pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
+	platform_device_register(pdev);
+}
+#else
+void __init at91_add_device_cf(struct at91_cf_data *data) {}
+#endif
 
 /* --------------------------------------------------------------------
  *  NAND / SmartMedia
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 0b3ae21..793fe7b 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -56,6 +56,9 @@
 	u8	vcc_pin;		/* power switching */
 	u8	rst_pin;		/* card reset */
 	u8	chipselect;		/* EBI Chip Select number */
+	u8	flags;
+#define AT91_CF_TRUE_IDE	0x01
+#define AT91_IDE_SWAP_A0_A2	0x02
 };
 extern void __init at91_add_device_cf(struct at91_cf_data *data);
 
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 9bb4f04..7ac812d 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -332,7 +332,6 @@
 			at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
 
 error:
-	sdram_selfrefresh_disable();
 	target_state = PM_SUSPEND_ON;
 	at91_irq_resume();
 	at91_gpio_resume();
diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c
index a957d23..38b6a9c 100644
--- a/arch/arm/mach-davinci/board-evm.c
+++ b/arch/arm/mach-davinci/board-evm.c
@@ -311,6 +311,9 @@
 	gpio_request(gpio + 7, "nCF_SEL");
 	gpio_direction_output(gpio + 7, 1);
 
+	/* irlml6401 sustains over 3A, switches 5V in under 8 msec */
+	setup_usb(500, 8);
+
 	return 0;
 }
 
@@ -417,9 +420,6 @@
 	platform_add_devices(davinci_evm_devices,
 			     ARRAY_SIZE(davinci_evm_devices));
 	evm_init_i2c();
-
-	/* irlml6401 sustains over 3A, switches 5V in under 8 msec */
-	setup_usb(500, 8);
 }
 
 static __init void davinci_evm_irq_init(void)
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index 28f6dbc..abb92b7 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -231,6 +231,11 @@
 		.lpsc = DAVINCI_LPSC_GPIO,
 	},
 	{
+		.name = "usb",
+		.rate = &commonrate,
+		.lpsc = DAVINCI_LPSC_USB,
+	},
+	{
 		.name = "AEMIFCLK",
 		.rate = &commonrate,
 		.lpsc = DAVINCI_LPSC_AEMIF,
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index 867ead2..6968078 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -47,6 +47,7 @@
 #elif defined(CONFIG_USB_MUSB_HOST)
 	.mode           = MUSB_HOST,
 #endif
+	.clock		= "usb",
 	.config		= &musb_config,
 };
 
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index f6a1345..6031e17 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -81,7 +81,7 @@
 	}
 
 	ldp_smc911x_resources[0].start = cs_mem_base + 0x0;
-	ldp_smc911x_resources[0].end   = cs_mem_base + 0xf;
+	ldp_smc911x_resources[0].end   = cs_mem_base + 0xff;
 	udelay(100);
 
 	eth_gpio = LDP_SMC911X_GPIO;
diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S
index 8a7f65b..94077fb 100644
--- a/arch/arm/mm/abort-ev6.S
+++ b/arch/arm/mm/abort-ev6.S
@@ -23,7 +23,8 @@
 #ifdef CONFIG_CPU_32v6K
 	clrex
 #else
-	strex	r0, r1, [sp]			@ Clear the exclusive monitor
+	sub	r1, sp, #4			@ Get unused stack location
+	strex	r0, r1, [r1]			@ Clear the exclusive monitor
 #endif
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c
index 1f7cc00..ebb305c 100644
--- a/arch/arm/plat-s3c64xx/irq-eint.c
+++ b/arch/arm/plat-s3c64xx/irq-eint.c
@@ -55,7 +55,7 @@
 	u32 mask;
 
 	mask = __raw_readl(S3C64XX_EINT0MASK);
-	mask |= eint_irq_to_bit(irq);
+	mask &= ~eint_irq_to_bit(irq);
 	__raw_writel(mask, S3C64XX_EINT0MASK);
 }
 
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 8f1f97d..0c1f86e 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -1129,6 +1129,7 @@
 
 config PM_WAKEUP_BY_GPIO
 	bool "Allow Wakeup from Standby by GPIO"
+	depends on PM && !BF54x
 
 config PM_WAKEUP_GPIO_NUMBER
 	int "GPIO number"
@@ -1168,6 +1169,12 @@
 	default n
 	help
 	  Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
+	  (all processors, except ADSP-BF549). This option sets
+	  the general-purpose wake-up enable (GPWE) control bit to enable
+	  wake-up upon detection of an active low signal on the /GPW (PH7) pin.
+	  On ADSP-BF549 this option enables the the same functionality on the
+	  /MRXON pin also PH7.
+
 endmenu
 
 menu "CPU Frequency scaling"
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index 5f981d9..79e7e63 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -21,12 +21,6 @@
 config HAVE_ARCH_KGDB
 	def_bool y
 
-config KGDB_TESTCASE
-	tristate "KGDB: for test case in expect"
-	default n
-	help
-	  This is a kgdb test case for automated testing.
-
 config DEBUG_VERBOSE
 	bool "Verbose fault messages"
 	default y
diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index 4fdb9e0..281f4b6 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Fri Jan  9 17:58:41 2009
+# Linux kernel version: 2.6.28
+# Fri Feb 20 10:01:44 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -133,10 +133,15 @@
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=0
 CONFIG_BF_REV_MAX=2
@@ -426,7 +431,17 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
+CONFIG_NET_DSA=y
+# CONFIG_NET_DSA_TAG_DSA is not set
+# CONFIG_NET_DSA_TAG_EDSA is not set
+# CONFIG_NET_DSA_TAG_TRAILER is not set
+CONFIG_NET_DSA_TAG_STPID=y
+# CONFIG_NET_DSA_MV88E6XXX is not set
+# CONFIG_NET_DSA_MV88E6060 is not set
+# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+# CONFIG_NET_DSA_MV88E6131 is not set
+# CONFIG_NET_DSA_MV88E6123_61_65 is not set
+CONFIG_NET_DSA_KSZ8893M=y
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -529,6 +544,8 @@
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -561,7 +578,9 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -607,6 +626,7 @@
 # CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -764,7 +784,23 @@
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -788,8 +824,10 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -861,10 +899,18 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
@@ -1062,12 +1108,20 @@
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB_TESTCASE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
 # CONFIG_DEBUG_HWERR is not set
@@ -1100,6 +1154,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 833128b..a50050f 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -327,8 +327,8 @@
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 334c94b..0a2a00d 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -290,8 +290,8 @@
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 9d73343..eb02758 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -290,8 +290,8 @@
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 4fb4108..9e62b9f 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -298,8 +298,8 @@
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
@@ -568,15 +568,7 @@
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_BFIN is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-CONFIG_MTD_NAND_PLATFORM=m
+# CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index cb32f56..dd6ad6b 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -306,8 +306,8 @@
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index 0f869761..6bc2fb1 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -361,8 +361,8 @@
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_BFIN_L2_CACHEABLE is not set
 # CONFIG_MPU is not set
 
@@ -680,7 +680,7 @@
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
 
 #
 # SCSI support type (disk, tape, CD-ROM)
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index 042c7ad..69714fb 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -329,8 +329,8 @@
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_BFIN_L2_CACHEABLE is not set
 # CONFIG_MPU is not set
 
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
index 3a20e28..017c6ea 100644
--- a/arch/blackfin/configs/BlackStamp_defconfig
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -288,8 +288,8 @@
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index 865ed85..d880ef7 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -332,8 +332,8 @@
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index efe9741..f410430 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -336,8 +336,8 @@
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 CONFIG_L1_MAX_PIECE=16
 # CONFIG_MPU is not set
 
@@ -595,7 +595,7 @@
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
 
 #
 # SCSI support type (disk, tape, CD-ROM)
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index eae83b5..7db9387 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -612,7 +612,7 @@
 CONFIG_SCSI=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
 
 #
 # SCSI support type (disk, tape, CD-ROM)
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index fa580af..a46529c 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -282,8 +282,8 @@
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 CONFIG_L1_MAX_PIECE=16
 
 #
diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild
index 606ecfd..09c3141 100644
--- a/arch/blackfin/include/asm/Kbuild
+++ b/arch/blackfin/include/asm/Kbuild
@@ -1,3 +1,4 @@
 include include/asm-generic/Kbuild.asm
 
+unifdef-y += bfin_sport.h
 unifdef-y += fixed_code.h
diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h
index fe88a2c..65a651d 100644
--- a/arch/blackfin/include/asm/bfin_sport.h
+++ b/arch/blackfin/include/asm/bfin_sport.h
@@ -1,30 +1,9 @@
 /*
- * File:         include/asm-blackfin/bfin_sport.h
- * Based on:
- * Author:       Roy Huang (roy.huang@analog.com)
+ * bfin_sport.h - userspace header for bfin sport driver
  *
- * Created:      Thu Aug. 24 2006
- * Description:
+ * Copyright 2004-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __BFIN_SPORT_H__
@@ -42,11 +21,10 @@
 #define NORM_FORMAT	0x0
 #define ALAW_FORMAT	0x2
 #define ULAW_FORMAT	0x3
-struct sport_register;
 
 /* Function driver which use sport must initialize the structure */
 struct sport_config {
-	/*TDM (multichannels), I2S or other mode */
+	/* TDM (multichannels), I2S or other mode */
 	unsigned int mode:3;
 
 	/* if TDM mode is selected, channels must be set */
@@ -72,12 +50,18 @@
 	int serial_clk;
 	int fsync_clk;
 
-	unsigned int data_format:2;	/*Normal, u-law or a-law */
+	unsigned int data_format:2;	/* Normal, u-law or a-law */
 
 	int word_len;		/* How length of the word in bits, 3-32 bits */
 	int dma_enabled;
 };
 
+/* Userspace interface */
+#define SPORT_IOC_MAGIC		'P'
+#define SPORT_IOC_CONFIG	_IOWR('P', 0x01, struct sport_config)
+
+#ifdef __KERNEL__
+
 struct sport_register {
 	unsigned short tcr1;
 	unsigned short reserved0;
@@ -117,9 +101,6 @@
 	unsigned long mrcs3;
 };
 
-#define SPORT_IOC_MAGIC		'P'
-#define SPORT_IOC_CONFIG	_IOWR('P', 0x01, struct sport_config)
-
 struct sport_dev {
 	struct cdev cdev;	/* Char device structure */
 
@@ -149,6 +130,8 @@
 	struct sport_config config;
 };
 
+#endif
+
 #define SPORT_TCR1	0
 #define	SPORT_TCR2	1
 #define	SPORT_TCLKDIV	2
@@ -169,4 +152,4 @@
 #define SPORT_MRCS2	22
 #define SPORT_MRCS3	23
 
-#endif				/*__BFIN_SPORT_H__*/
+#endif
diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h
index 76f53d8..343b563 100644
--- a/arch/blackfin/include/asm/ipipe.h
+++ b/arch/blackfin/include/asm/ipipe.h
@@ -35,9 +35,9 @@
 #include <asm/atomic.h>
 #include <asm/traps.h>
 
-#define IPIPE_ARCH_STRING     "1.8-00"
+#define IPIPE_ARCH_STRING     "1.9-00"
 #define IPIPE_MAJOR_NUMBER    1
-#define IPIPE_MINOR_NUMBER    8
+#define IPIPE_MINOR_NUMBER    9
 #define IPIPE_PATCH_NUMBER    0
 
 #ifdef CONFIG_SMP
@@ -83,9 +83,9 @@
 				"%2 = CYCLES2\n"		\
 				"CC = %2 == %0\n"		\
 				"if ! CC jump 1b\n"		\
-				: "=r" (((unsigned long *)&t)[1]),	\
-				  "=r" (((unsigned long *)&t)[0]),	\
-				  "=r" (__cy2)				\
+				: "=d,a" (((unsigned long *)&t)[1]),	\
+				  "=d,a" (((unsigned long *)&t)[0]),	\
+				  "=d,a" (__cy2)				\
 				: /*no input*/ : "CC");			\
 	t;								\
 	})
@@ -118,35 +118,40 @@
 
 #define __ipipe_disable_irq(irq)	(irq_desc[irq].chip->mask(irq))
 
-#define __ipipe_lock_root()					\
-	set_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
+static inline int __ipipe_check_tickdev(const char *devname)
+{
+	return 1;
+}
 
-#define __ipipe_unlock_root()					\
-	clear_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
+static inline void __ipipe_lock_root(void)
+{
+	set_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
+}
+
+static inline void __ipipe_unlock_root(void)
+{
+	clear_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
+}
 
 void __ipipe_enable_pipeline(void);
 
 #define __ipipe_hook_critical_ipi(ipd) do { } while (0)
 
-#define __ipipe_sync_pipeline(syncmask)					\
-	do {								\
-		struct ipipe_domain *ipd = ipipe_current_domain;	\
-		if (likely(ipd != ipipe_root_domain || !test_bit(IPIPE_ROOTLOCK_FLAG, &ipd->flags))) \
-			__ipipe_sync_stage(syncmask);			\
-	} while (0)
+#define __ipipe_sync_pipeline  ___ipipe_sync_pipeline
+void ___ipipe_sync_pipeline(unsigned long syncmask);
 
 void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs);
 
 int __ipipe_get_irq_priority(unsigned irq);
 
-int __ipipe_get_irqthread_priority(unsigned irq);
-
 void __ipipe_stall_root_raw(void);
 
 void __ipipe_unstall_root_raw(void);
 
 void __ipipe_serial_debug(const char *fmt, ...);
 
+asmlinkage void __ipipe_call_irqtail(unsigned long addr);
+
 DECLARE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
 
 extern unsigned long __ipipe_core_clock;
@@ -162,42 +167,25 @@
 
 #define __ipipe_run_irqtail()  /* Must be a macro */			\
 	do {								\
-		asmlinkage void __ipipe_call_irqtail(void);		\
 		unsigned long __pending;				\
-		CSYNC();					\
+		CSYNC();						\
 		__pending = bfin_read_IPEND();				\
 		if (__pending & 0x8000) {				\
 			__pending &= ~0x8010;				\
 			if (__pending && (__pending & (__pending - 1)) == 0) \
-				__ipipe_call_irqtail();			\
+				__ipipe_call_irqtail(__ipipe_irq_tail_hook); \
 		}							\
 	} while (0)
 
 #define __ipipe_run_isr(ipd, irq)					\
 	do {								\
 		if (ipd == ipipe_root_domain) {				\
-			/*						\
-			 * Note: the I-pipe implements a threaded interrupt model on \
-			 * this arch for Linux external IRQs. The interrupt handler we \
-			 * call here only wakes up the associated IRQ thread. \
-			 */						\
-			if (ipipe_virtual_irq_p(irq)) {			\
-				/* No irqtail here; virtual interrupts have no effect \
-				   on IPEND so there is no need for processing \
-				   deferral. */				\
-				local_irq_enable_nohead(ipd);		\
+			local_irq_enable_hw();				\
+			if (ipipe_virtual_irq_p(irq))			\
 				ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
-				local_irq_disable_nohead(ipd);		\
-			} else						\
-				/*					\
-				 * No need to run the irqtail here either; \
-				 * we can't be preempted by hw IRQs, so	\
-				 * non-Linux IRQs cannot stack over the short \
-				 * thread wakeup code. Which in turn means \
-				 * that no irqtail condition could be pending \
-				 * for domains above Linux in the pipeline. \
-				 */					\
+			else						\
 				ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \
+			local_irq_disable_hw();				\
 		} else {						\
 			__clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
 			local_irq_enable_nohead(ipd);			\
@@ -217,42 +205,24 @@
 
 int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
 
-#define IS_SYSIRQ(irq)		((irq) > IRQ_CORETMR && (irq) <= SYS_IRQS)
-#define IS_GPIOIRQ(irq)		((irq) >= GPIO_IRQ_BASE && (irq) < NR_IRQS)
-
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+#define IRQ_SYSTMR		IRQ_CORETMR
+#define IRQ_PRIOTMR		IRQ_CORETMR
+#else
 #define IRQ_SYSTMR		IRQ_TIMER0
 #define IRQ_PRIOTMR		CONFIG_IRQ_TIMER0
+#endif
 
-#if defined(CONFIG_BF531) || defined(CONFIG_BF532) || defined(CONFIG_BF533)
-#define PRIO_GPIODEMUX(irq)	CONFIG_PFA
-#elif defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
-#define PRIO_GPIODEMUX(irq)	CONFIG_IRQ_PROG_INTA
-#elif defined(CONFIG_BF52x)
-#define PRIO_GPIODEMUX(irq)	((irq) == IRQ_PORTF_INTA ? CONFIG_IRQ_PORTF_INTA : \
-				 (irq) == IRQ_PORTG_INTA ? CONFIG_IRQ_PORTG_INTA : \
-				 (irq) == IRQ_PORTH_INTA ? CONFIG_IRQ_PORTH_INTA : \
-				 -1)
-#elif defined(CONFIG_BF561)
-#define PRIO_GPIODEMUX(irq)	((irq) == IRQ_PROG0_INTA ? CONFIG_IRQ_PROG0_INTA : \
-				 (irq) == IRQ_PROG1_INTA ? CONFIG_IRQ_PROG1_INTA : \
-				 (irq) == IRQ_PROG2_INTA ? CONFIG_IRQ_PROG2_INTA : \
-				 -1)
+#ifdef CONFIG_BF561
 #define bfin_write_TIMER_DISABLE(val)	bfin_write_TMRS8_DISABLE(val)
 #define bfin_write_TIMER_ENABLE(val)	bfin_write_TMRS8_ENABLE(val)
 #define bfin_write_TIMER_STATUS(val)	bfin_write_TMRS8_STATUS(val)
 #define bfin_read_TIMER_STATUS()	bfin_read_TMRS8_STATUS()
 #elif defined(CONFIG_BF54x)
-#define PRIO_GPIODEMUX(irq)	((irq) == IRQ_PINT0 ? CONFIG_IRQ_PINT0 : \
-				 (irq) == IRQ_PINT1 ? CONFIG_IRQ_PINT1 : \
-				 (irq) == IRQ_PINT2 ? CONFIG_IRQ_PINT2 : \
-				 (irq) == IRQ_PINT3 ? CONFIG_IRQ_PINT3 : \
-				 -1)
 #define bfin_write_TIMER_DISABLE(val)	bfin_write_TIMER_DISABLE0(val)
 #define bfin_write_TIMER_ENABLE(val)	bfin_write_TIMER_ENABLE0(val)
 #define bfin_write_TIMER_STATUS(val)	bfin_write_TIMER_STATUS0(val)
 #define bfin_read_TIMER_STATUS(val)	bfin_read_TIMER_STATUS0(val)
-#else
-# error "no PRIO_GPIODEMUX() for this part"
 #endif
 
 #define __ipipe_root_tick_p(regs)	((regs->ipend & 0x10) != 0)
@@ -275,4 +245,6 @@
 
 #endif /* !CONFIG_IPIPE */
 
+#define ipipe_update_tick_evtdev(evtdev)	do { } while (0)
+
 #endif	/* !__ASM_BLACKFIN_IPIPE_H */
diff --git a/arch/blackfin/include/asm/ipipe_base.h b/arch/blackfin/include/asm/ipipe_base.h
index cb1025a..3e8acbd 100644
--- a/arch/blackfin/include/asm/ipipe_base.h
+++ b/arch/blackfin/include/asm/ipipe_base.h
@@ -1,5 +1,5 @@
 /*   -*- linux-c -*-
- *   include/asm-blackfin/_baseipipe.h
+ *   include/asm-blackfin/ipipe_base.h
  *
  *   Copyright (C) 2007 Philippe Gerum.
  *
@@ -27,8 +27,9 @@
 #define IPIPE_NR_XIRQS		NR_IRQS
 #define IPIPE_IRQ_ISHIFT	5	/* 2^5 for 32bits arch. */
 
-/* Blackfin-specific, global domain flags */
-#define IPIPE_ROOTLOCK_FLAG	1	/* Lock pipeline for root */
+/* Blackfin-specific, per-cpu pipeline status */
+#define IPIPE_SYNCDEFER_FLAG	15
+#define IPIPE_SYNCDEFER_MASK	(1L << IPIPE_SYNCDEFER_MASK)
 
  /* Blackfin traps -- i.e. exception vector numbers */
 #define IPIPE_NR_FAULTS		52 /* We leave a gap after VEC_ILL_RES. */
@@ -48,11 +49,6 @@
 
 #ifndef __ASSEMBLY__
 
-#include <linux/bitops.h>
-
-extern int test_bit(int nr, const void *addr);
-
-
 extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */
 
 static inline void __ipipe_stall_root(void)
diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h
index 3d97790..7645e85 100644
--- a/arch/blackfin/include/asm/irq.h
+++ b/arch/blackfin/include/asm/irq.h
@@ -61,20 +61,38 @@
 #define raw_irqs_disabled_flags(flags)	(!irqs_enabled_from_flags_hw(flags))
 #define local_test_iflag_hw(x)		irqs_enabled_from_flags_hw(x)
 
-#define local_save_flags(x)						\
-	do {								\
-		(x) = __ipipe_test_root() ? \
+#define local_save_flags(x)					 \
+	do {							 \
+		(x) = __ipipe_test_root() ?			 \
 			__all_masked_irq_flags : bfin_irq_flags; \
+		barrier();					 \
 	} while (0)
 
-#define local_irq_save(x)				\
-	do {						\
-		(x) = __ipipe_test_and_stall_root();	\
+#define local_irq_save(x)					 \
+	do {						 	 \
+		(x) = __ipipe_test_and_stall_root() ?		 \
+			__all_masked_irq_flags : bfin_irq_flags; \
+		barrier();					 \
 	} while (0)
 
-#define local_irq_restore(x)	__ipipe_restore_root(x)
-#define local_irq_disable()	__ipipe_stall_root()
-#define local_irq_enable()	__ipipe_unstall_root()
+static inline void local_irq_restore(unsigned long x)
+{
+	barrier();
+	__ipipe_restore_root(x == __all_masked_irq_flags);
+}
+
+#define local_irq_disable()			\
+	do {					\
+		__ipipe_stall_root();		\
+		barrier();			\
+	} while (0)
+
+static inline void local_irq_enable(void)
+{
+	barrier();
+	__ipipe_unstall_root();
+}
+
 #define irqs_disabled()		__ipipe_test_root()
 
 #define local_save_flags_hw(x) \
diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h
index e721ce5..2920087 100644
--- a/arch/blackfin/include/asm/thread_info.h
+++ b/arch/blackfin/include/asm/thread_info.h
@@ -122,6 +122,7 @@
 #define TIF_MEMDIE              4
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
 #define TIF_FREEZE              6       /* is freezing for suspend */
+#define TIF_IRQ_SYNC            7       /* sync pipeline stage */
 
 /* as above, but as bit values */
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
@@ -130,6 +131,7 @@
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_FREEZE             (1<<TIF_FREEZE)
+#define _TIF_IRQ_SYNC           (1<<TIF_IRQ_SYNC)
 
 #define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
 
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 4a92a86..fd4d432 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -15,13 +15,15 @@
     obj-y += time.o
 endif
 
-CFLAGS_kgdb_test.o := -mlong-calls -O0
-
 obj-$(CONFIG_IPIPE)                  += ipipe.o
 obj-$(CONFIG_IPIPE_TRACE_MCOUNT)     += mcount.o
 obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o
 obj-$(CONFIG_CPLB_INFO)              += cplbinfo.o
 obj-$(CONFIG_MODULES)                += module.o
 obj-$(CONFIG_KGDB)                   += kgdb.o
-obj-$(CONFIG_KGDB_TESTCASE)          += kgdb_test.o
+obj-$(CONFIG_KGDB_TESTS)             += kgdb_test.o
 obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
+
+# the kgdb test puts code into L2 and without linker
+# relaxation, we need to force long calls to/from it
+CFLAGS_kgdb_test.o := -mlong-calls -O0
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index 0e28f75..d6c0677 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -53,9 +53,13 @@
 
 	i_d = i_i = 0;
 
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
 	/* Set up the zero page.  */
 	d_tbl[i_d].addr = 0;
 	d_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+	i_tbl[i_i].addr = 0;
+	i_tbl[i_i++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+#endif
 
 	/* Cover kernel memory with 4M pages.  */
 	addr = 0;
diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c
index 339be5a..a5de8d4 100644
--- a/arch/blackfin/kernel/ipipe.c
+++ b/arch/blackfin/kernel/ipipe.c
@@ -35,14 +35,8 @@
 #include <asm/atomic.h>
 #include <asm/io.h>
 
-static int create_irq_threads;
-
 DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
 
-static DEFINE_PER_CPU(unsigned long, pending_irqthread_mask);
-
-static DEFINE_PER_CPU(int [IVG13 + 1], pending_irq_count);
-
 asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
 
 static void __ipipe_no_irqtail(void);
@@ -93,6 +87,7 @@
  */
 void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
 {
+	struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
 	struct ipipe_domain *this_domain, *next_domain;
 	struct list_head *head, *pos;
 	int m_ack, s = -1;
@@ -104,7 +99,6 @@
 	 * interrupt.
 	 */
 	m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR);
-
 	this_domain = ipipe_current_domain;
 
 	if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control)))
@@ -114,49 +108,28 @@
 		next_domain = list_entry(head, struct ipipe_domain, p_link);
 		if (likely(test_bit(IPIPE_WIRED_FLAG, &next_domain->irqs[irq].control))) {
 			if (!m_ack && next_domain->irqs[irq].acknowledge != NULL)
-				next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
-			if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
-				s = __test_and_set_bit(IPIPE_STALL_FLAG,
-						       &ipipe_root_cpudom_var(status));
+				next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
+			if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
+				s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
 			__ipipe_dispatch_wired(next_domain, irq);
-				goto finalize;
-			return;
+			goto out;
 		}
 	}
 
 	/* Ack the interrupt. */
 
 	pos = head;
-
 	while (pos != &__ipipe_pipeline) {
 		next_domain = list_entry(pos, struct ipipe_domain, p_link);
-		/*
-		 * For each domain handling the incoming IRQ, mark it
-		 * as pending in its log.
-		 */
 		if (test_bit(IPIPE_HANDLE_FLAG, &next_domain->irqs[irq].control)) {
-			/*
-			 * Domains that handle this IRQ are polled for
-			 * acknowledging it by decreasing priority
-			 * order. The interrupt must be made pending
-			 * _first_ in the domain's status flags before
-			 * the PIC is unlocked.
-			 */
 			__ipipe_set_irq_pending(next_domain, irq);
-
 			if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) {
-				next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
+				next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
 				m_ack = 1;
 			}
 		}
-
-		/*
-		 * If the domain does not want the IRQ to be passed
-		 * down the interrupt pipe, exit the loop now.
-		 */
 		if (!test_bit(IPIPE_PASS_FLAG, &next_domain->irqs[irq].control))
 			break;
-
 		pos = next_domain->p_link.next;
 	}
 
@@ -166,18 +139,24 @@
 	 * immediately to the current domain if the interrupt has been
 	 * marked as 'sticky'. This search does not go beyond the
 	 * current domain in the pipeline. We also enforce the
-	 * additional root stage lock (blackfin-specific). */
+	 * additional root stage lock (blackfin-specific).
+	 */
+	if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
+		s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
 
-	if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
-		s = __test_and_set_bit(IPIPE_STALL_FLAG,
-				       &ipipe_root_cpudom_var(status));
-finalize:
+	/*
+	 * If the interrupt preempted the head domain, then do not
+	 * even try to walk the pipeline, unless an interrupt is
+	 * pending for it.
+	 */
+	if (test_bit(IPIPE_AHEAD_FLAG, &this_domain->flags) &&
+	    ipipe_head_cpudom_var(irqpend_himask) == 0)
+		goto out;
 
 	__ipipe_walk_pipeline(head);
-
+out:
 	if (!s)
-		__clear_bit(IPIPE_STALL_FLAG,
-			    &ipipe_root_cpudom_var(status));
+		__clear_bit(IPIPE_STALL_FLAG, &p->status);
 }
 
 int __ipipe_check_root(void)
@@ -187,7 +166,7 @@
 
 void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
 {
-	struct irq_desc *desc = irq_desc + irq;
+	struct irq_desc *desc = irq_to_desc(irq);
 	int prio = desc->ic_prio;
 
 	desc->depth = 0;
@@ -199,7 +178,7 @@
 
 void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
 {
-	struct irq_desc *desc = irq_desc + irq;
+	struct irq_desc *desc = irq_to_desc(irq);
 	int prio = desc->ic_prio;
 
 	if (ipd != &ipipe_root &&
@@ -236,15 +215,18 @@
 {
 	unsigned long flags;
 
-	/* We need to run the IRQ tail hook whenever we don't
+	/*
+	 * We need to run the IRQ tail hook whenever we don't
 	 * propagate a syscall to higher domains, because we know that
 	 * important operations might be pending there (e.g. Xenomai
-	 * deferred rescheduling). */
+	 * deferred rescheduling).
+	 */
 
-	if (!__ipipe_syscall_watched_p(current, regs->orig_p0)) {
+	if (regs->orig_p0 < NR_syscalls) {
 		void (*hook)(void) = (void (*)(void))__ipipe_irq_tail_hook;
 		hook();
-		return 0;
+		if ((current->flags & PF_EVNOTIFY) == 0)
+			return 0;
 	}
 
 	/*
@@ -312,112 +294,46 @@
 {
 	unsigned long flags;
 
+#ifdef CONFIG_IPIPE_DEBUG
 	if (irq >= IPIPE_NR_IRQS ||
 	    (ipipe_virtual_irq_p(irq)
 	     && !test_bit(irq - IPIPE_VIRQ_BASE, &__ipipe_virtual_irq_map)))
 		return -EINVAL;
+#endif
 
 	local_irq_save_hw(flags);
-
 	__ipipe_handle_irq(irq, NULL);
-
 	local_irq_restore_hw(flags);
 
 	return 1;
 }
 
-/* Move Linux IRQ to threads. */
-
-static int do_irqd(void *__desc)
+asmlinkage void __ipipe_sync_root(void)
 {
-	struct irq_desc *desc = __desc;
-	unsigned irq = desc - irq_desc;
-	int thrprio = desc->thr_prio;
-	int thrmask = 1 << thrprio;
-	int cpu = smp_processor_id();
-	cpumask_t cpumask;
+	unsigned long flags;
 
-	sigfillset(&current->blocked);
-	current->flags |= PF_NOFREEZE;
-	cpumask = cpumask_of_cpu(cpu);
-	set_cpus_allowed(current, cpumask);
-	ipipe_setscheduler_root(current, SCHED_FIFO, 50 + thrprio);
+	BUG_ON(irqs_disabled());
 
-	while (!kthread_should_stop()) {
-		local_irq_disable();
-		if (!(desc->status & IRQ_SCHEDULED)) {
-			set_current_state(TASK_INTERRUPTIBLE);
-resched:
-			local_irq_enable();
-			schedule();
-			local_irq_disable();
-		}
-		__set_current_state(TASK_RUNNING);
-		/*
-		 * If higher priority interrupt servers are ready to
-		 * run, reschedule immediately. We need this for the
-		 * GPIO demux IRQ handler to unmask the interrupt line
-		 * _last_, after all GPIO IRQs have run.
-		 */
-		if (per_cpu(pending_irqthread_mask, cpu) & ~(thrmask|(thrmask-1)))
-			goto resched;
-		if (--per_cpu(pending_irq_count[thrprio], cpu) == 0)
-			per_cpu(pending_irqthread_mask, cpu) &= ~thrmask;
-		desc->status &= ~IRQ_SCHEDULED;
-		desc->thr_handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs));
-		local_irq_enable();
-	}
-	__set_current_state(TASK_RUNNING);
-	return 0;
+	local_irq_save_hw(flags);
+
+	clear_thread_flag(TIF_IRQ_SYNC);
+
+	if (ipipe_root_cpudom_var(irqpend_himask) != 0)
+		__ipipe_sync_pipeline(IPIPE_IRQMASK_ANY);
+
+	local_irq_restore_hw(flags);
 }
 
-static void kick_irqd(unsigned irq, void *cookie)
+void ___ipipe_sync_pipeline(unsigned long syncmask)
 {
-	struct irq_desc *desc = irq_desc + irq;
-	int thrprio = desc->thr_prio;
-	int thrmask = 1 << thrprio;
-	int cpu = smp_processor_id();
+	struct ipipe_domain *ipd = ipipe_current_domain;
 
-	if (!(desc->status & IRQ_SCHEDULED)) {
-		desc->status |= IRQ_SCHEDULED;
-		per_cpu(pending_irqthread_mask, cpu) |= thrmask;
-		++per_cpu(pending_irq_count[thrprio], cpu);
-		wake_up_process(desc->thread);
-	}
-}
-
-int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc)
-{
-	if (desc->thread || !create_irq_threads)
-		return 0;
-
-	desc->thread = kthread_create(do_irqd, desc, "IRQ %d", irq);
-	if (desc->thread == NULL) {
-		printk(KERN_ERR "irqd: could not create IRQ thread %d!\n", irq);
-		return -ENOMEM;
+	if (ipd == ipipe_root_domain) {
+		if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
+			return;
 	}
 
-	wake_up_process(desc->thread);
-
-	desc->thr_handler = ipipe_root_domain->irqs[irq].handler;
-	ipipe_root_domain->irqs[irq].handler = &kick_irqd;
-
-	return 0;
-}
-
-void __init ipipe_init_irq_threads(void)
-{
-	unsigned irq;
-	struct irq_desc *desc;
-
-	create_irq_threads = 1;
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		desc = irq_desc + irq;
-		if (desc->action != NULL ||
-			(desc->status & IRQ_NOREQUEST) != 0)
-			ipipe_start_irq_thread(irq, desc);
-	}
+	__ipipe_sync_stage(syncmask);
 }
 
 EXPORT_SYMBOL(show_stack);
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
index 75724ee..7fd1265 100644
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -144,11 +144,15 @@
 #endif
 	generic_handle_irq(irq);
 
-#ifndef CONFIG_IPIPE	/* Useless and bugous over the I-pipe: IRQs are threaded. */
-	/* If we're the only interrupt running (ignoring IRQ15 which is for
-	   syscalls), lower our priority to IRQ14 so that softirqs run at
-	   that level.  If there's another, lower-level interrupt, irq_exit
-	   will defer softirqs to that.  */
+#ifndef CONFIG_IPIPE
+	/*
+	 * If we're the only interrupt running (ignoring IRQ15 which
+	 * is for syscalls), lower our priority to IRQ14 so that
+	 * softirqs run at that level.  If there's another,
+	 * lower-level interrupt, irq_exit will defer softirqs to
+	 * that. If the interrupt pipeline is enabled, we are already
+	 * running at IRQ14 priority, so we don't need this code.
+	 */
 	CSYNC();
 	pending = bfin_read_IPEND() & ~0x8000;
 	other_ints = pending & (pending - 1);
diff --git a/arch/blackfin/kernel/kgdb_test.c b/arch/blackfin/kernel/kgdb_test.c
index 3dba9c1..dbcf3e4 100644
--- a/arch/blackfin/kernel/kgdb_test.c
+++ b/arch/blackfin/kernel/kgdb_test.c
@@ -20,6 +20,7 @@
 static char cmdline[256];
 static unsigned long len;
 
+#ifndef CONFIG_SMP
 static int num1 __attribute__((l1_data));
 
 void kgdb_l1_test(void) __attribute__((l1_text));
@@ -32,6 +33,8 @@
 	printk(KERN_ALERT "L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
 	return ;
 }
+#endif
+
 #if L2_LENGTH
 
 static int num2 __attribute__((l2));
@@ -59,10 +62,12 @@
 static int test_proc_output(char *buf)
 {
 	kgdb_test("hello world!", 12, 0x55, 0x10);
+#ifndef CONFIG_SMP
 	kgdb_l1_test();
-	#if L2_LENGTH
+#endif
+#if L2_LENGTH
 	kgdb_l2_test();
-	#endif
+#endif
 
 	return 0;
 }
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index 594e325..d76618d 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -45,6 +45,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/dma.h>
 #include <asm/fixed_code.h>
+#include <asm/cacheflush.h>
 #include <asm/mem_map.h>
 
 #define TEXT_OFFSET 0
@@ -240,7 +241,7 @@
 
 			} else if (addr >= FIXED_CODE_START
 			    && addr + sizeof(tmp) <= FIXED_CODE_END) {
-				memcpy(&tmp, (const void *)(addr), sizeof(tmp));
+				copy_from_user_page(0, 0, 0, &tmp, (const void *)(addr), sizeof(tmp));
 				copied = sizeof(tmp);
 
 			} else
@@ -320,7 +321,7 @@
 
 			} else if (addr >= FIXED_CODE_START
 			    && addr + sizeof(data) <= FIXED_CODE_END) {
-				memcpy((void *)(addr), &data, sizeof(data));
+				copy_to_user_page(0, 0, 0, (void *)(addr), &data, sizeof(data));
 				copied = sizeof(data);
 
 			} else
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index e5c1162..a58687b 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -889,6 +889,10 @@
 			       CPU, bfin_revid());
 	}
 
+	/* We can't run on BF548-0.1 due to ANOMALY 05000448 */
+	if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
+		panic("You can't run on this processor due to 05000448\n");
+
 	printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
 
 	printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
@@ -1141,12 +1145,12 @@
 		icache_size = 0;
 
 	seq_printf(m, "cache size\t: %d KB(L1 icache) "
-		"%d KB(L1 dcache-%s) %d KB(L2 cache)\n",
+		"%d KB(L1 dcache%s) %d KB(L2 cache)\n",
 		icache_size, dcache_size,
 #if defined CONFIG_BFIN_WB
-		"wb"
+		"-wb"
 #elif defined CONFIG_BFIN_WT
-		"wt"
+		"-wt"
 #endif
 		"", 0);
 
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c
index 172b4c5..1bbacfb 100644
--- a/arch/blackfin/kernel/time.c
+++ b/arch/blackfin/kernel/time.c
@@ -134,7 +134,10 @@
 
 	write_seqlock(&xtime_lock);
 #if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE)
-/* FIXME: Here TIMIL0 is not set when IPIPE enabled, why? */
+	/*
+	 * TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is
+	 * enabled.
+	 */
 	if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) {
 #endif
 		do_timer(1);
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 0e17534..41f2eac 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -113,7 +113,6 @@
 	.name = "bfin_mac",
 	.dev.platform_data = &bfin_mii_bus,
 };
-#endif
 
 #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 static struct dsa_platform_data ksz8893m_switch_data = {
@@ -132,6 +131,7 @@
 	.dev.platform_data = &ksz8893m_switch_data,
 };
 #endif
+#endif
 
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -171,6 +171,7 @@
 };
 #endif
 
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #if defined(CONFIG_NET_DSA_KSZ8893M) \
 	|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 /* SPI SWITCH CHIP */
@@ -179,10 +180,11 @@
 	.bits_per_word = 8,
 };
 #endif
+#endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -259,6 +261,7 @@
 	},
 #endif
 
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #if defined(CONFIG_NET_DSA_KSZ8893M) \
 	|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 	{
@@ -271,24 +274,15 @@
 		.mode = SPI_MODE_3,
 	},
 #endif
+#endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
@@ -630,11 +624,10 @@
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 	&bfin_mii_bus,
 	&bfin_mac_device,
-#endif
-
 #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 	&ksz8893m_switch_device,
 #endif
+#endif
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	&bfin_spi0_device,
diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h
index e5b4bef..c847bb1 100644
--- a/arch/blackfin/mach-bf518/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h
@@ -2,12 +2,12 @@
  * File: include/asm-blackfin/mach-bf518/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
- *  - ????
+ *  - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -19,6 +19,8 @@
 #define ANOMALY_05000122 (1)
 /* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
@@ -53,6 +55,12 @@
 #define ANOMALY_05000443 (1)
 /* Incorrect L1 Instruction Bank B Memory Map Location */
 #define ANOMALY_05000444 (1)
+/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
+#define ANOMALY_05000452 (1)
+/* PWM_TRIPB Signal Not Available on PG10 */
+#define ANOMALY_05000453 (1)
+/* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */
+#define ANOMALY_05000455 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@@ -65,15 +73,20 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
 #define ANOMALY_05000285 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (0)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
index b50a63b..e21c1c3 100644
--- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
@@ -144,7 +144,7 @@
 	 CH_UART0_TX,
 	 CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	 CONFIG_UART0_CTS_PIN,
 	 CONFIG_UART0_RTS_PIN,
 #endif
@@ -158,7 +158,7 @@
 	 CH_UART1_TX,
 	 CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	 CONFIG_UART1_CTS_PIN,
 	 CONFIG_UART1_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 856c097..48e69ee 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -487,9 +487,9 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -585,23 +585,13 @@
 		.controller_data = &ad9960_spi_chip_info,
 	},
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 83606fc..7fe480e 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -256,9 +256,9 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -366,23 +366,13 @@
 	},
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index 035e8d8..df6808d 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf527/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -167,12 +167,16 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
 #define ANOMALY_05000285 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000412 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index 75722d6..e8c41fd 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -144,7 +144,7 @@
 	 CH_UART0_TX,
 	 CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	 CONFIG_UART0_CTS_PIN,
 	 CONFIG_UART0_RTS_PIN,
 #endif
@@ -158,7 +158,7 @@
 	 CH_UART1_TX,
 	 CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	 CONFIG_UART1_CTS_PIN,
 	 CONFIG_UART1_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig
index 308c98d..8d8b3e7 100644
--- a/arch/blackfin/mach-bf533/boards/Kconfig
+++ b/arch/blackfin/mach-bf533/boards/Kconfig
@@ -38,9 +38,4 @@
 	help
 	  Core support for IP04/IP04 open hardware IP-PBX.
 
-config GENERIC_BF533_BOARD
-	bool "Generic"
-	help
-	  Generic or Custom board support.
-
 endchoice
diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile
index 9afbe72..ff1e832 100644
--- a/arch/blackfin/mach-bf533/boards/Makefile
+++ b/arch/blackfin/mach-bf533/boards/Makefile
@@ -2,7 +2,6 @@
 # arch/blackfin/mach-bf533/boards/Makefile
 #
 
-obj-$(CONFIG_GENERIC_BF533_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN533_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN532_IP0X)             += ip0x.o
 obj-$(CONFIG_BFIN533_EZKIT)            += ezkit.o
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 015c18f..0765872 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -101,9 +101,9 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -129,23 +129,13 @@
 	},
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index e7061c7..e897487 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -96,9 +96,9 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -138,23 +138,13 @@
 	},
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c
deleted file mode 100644
index 986eeec..0000000
--- a/arch/blackfin/mach-bf533/boards/generic_board.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * File:         arch/blackfin/mach-bf533/generic_board.c
- * Based on:     arch/blackfin/mach-bf533/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
- *
- * Created:      2005
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-static struct platform_device rtc_device = {
-	.name = "rtc-bfin",
-	.id   = -1,
-};
-#endif
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
-	{
-		.start = 0x20300300,
-		.end = 0x20300300 + 16,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PROG_INTB,
-		.end = IRQ_PROG_INTB,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	}, {
-		.start = IRQ_PF7,
-		.end = IRQ_PF7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name = "smc91x",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(smc91x_resources),
-	.resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir0_device = {
-	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
-	.resource = bfin_sir0_resources,
-};
-#endif
-#endif
-
-static struct platform_device *generic_board_devices[] __initdata = {
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-	&rtc_device,
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-	&smc91x_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-	&bfin_sir0_device,
-#endif
-#endif
-};
-
-static int __init generic_board_init(void)
-{
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices));
-}
-
-arch_initcall(generic_board_init);
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index e30b1b7..f19b633 100644
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -127,8 +127,8 @@
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* all SPI peripherals info goes here */
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 /*
  * CPOL (Clock Polarity)
  *  0 - Active high SCK
@@ -152,14 +152,13 @@
 /* Notice: for blackfin, the speed_hz is the value of register
  * SPI_BAUD, not the real baudrate */
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 2,
 		.bus_num = 1,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 	},
 #endif
 };
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 0d3a034..1cf893e 100644
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf533/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -160,7 +160,7 @@
 #define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
 /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
 #define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
 /* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
 #define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
@@ -278,9 +278,12 @@
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index f3d9e49..5f517f5 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -134,7 +134,7 @@
 	CH_UART_TX,
 	CH_UART_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART0_CTS_PIN,
 	CONFIG_UART0_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig
index 42a57b0..77c59da 100644
--- a/arch/blackfin/mach-bf537/boards/Kconfig
+++ b/arch/blackfin/mach-bf537/boards/Kconfig
@@ -33,9 +33,4 @@
 	help
 	  Board supply package for CSP Minotaur
 
-config GENERIC_BF537_BOARD
-	bool "Generic"
-	help
-	  Generic or Custom board support.
-
 endchoice
diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile
index 7168cc1..68b98a7a 100644
--- a/arch/blackfin/mach-bf537/boards/Makefile
+++ b/arch/blackfin/mach-bf537/boards/Makefile
@@ -2,7 +2,6 @@
 # arch/blackfin/mach-bf537/boards/Makefile
 #
 
-obj-$(CONFIG_GENERIC_BF537_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN537_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_CM)   += cm_bf537.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM)  += tcm_bf537.o
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 9cd8fb2..41c75b9 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -108,9 +108,9 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -160,23 +160,13 @@
 	},
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 7,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 1,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
deleted file mode 100644
index da710fd..0000000
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ /dev/null
@@ -1,745 +0,0 @@
-/*
- * File:         arch/blackfin/mach-bf537/boards/generic_board.c
- * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
- *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/device.h>
-#include <linux/etherdevice.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb/isp1362.h>
-#endif
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/usb/sl811.h>
-#include <asm/dma.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/reboot.h>
-#include <asm/portmux.h>
-#include <linux/spi/ad7877.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
-#include <linux/usb/isp1760.h>
-static struct resource bfin_isp1760_resources[] = {
-	[0] = {
-		.start  = 0x203C0000,
-		.end    = 0x203C0000 + 0x000fffff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_PF7,
-		.end    = IRQ_PF7,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct isp1760_platform_data isp1760_priv = {
-	.is_isp1761 = 0,
-	.port1_disable = 0,
-	.bus_width_16 = 1,
-	.port1_otg = 0,
-	.analog_oc = 0,
-	.dack_polarity_high = 0,
-	.dreq_polarity_high = 0,
-};
-
-static struct platform_device bfin_isp1760_device = {
-	.name           = "isp1760-hcd",
-	.id             = 0,
-	.dev = {
-		.platform_data = &isp1760_priv,
-	},
-	.num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
-	.resource       = bfin_isp1760_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
-static struct resource bfin_pcmcia_cf_resources[] = {
-	{
-		.start = 0x20310000, /* IO PORT */
-		.end = 0x20312000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20311000, /* Attribute Memory */
-		.end = 0x20311FFF,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PF4,
-		.end = IRQ_PF4,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	}, {
-		.start = 6, /* Card Detect PF6 */
-		.end = 6,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pcmcia_cf_device = {
-	.name = "bfin_cf_pcmcia",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
-	.resource = bfin_pcmcia_cf_resources,
-};
-#endif
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-static struct platform_device rtc_device = {
-	.name = "rtc-bfin",
-	.id   = -1,
-};
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
-	{
-		.name = "smc91x-regs",
-		.start = 0x20300300,
-		.end = 0x20300300 + 16,
-		.flags = IORESOURCE_MEM,
-	}, {
-
-		.start = IRQ_PF7,
-		.end = IRQ_PF7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-static struct platform_device smc91x_device = {
-	.name = "smc91x",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(smc91x_resources),
-	.resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= 0x203FB800,
-		.end	= 0x203FB800 + 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0x203FB800 + 4,
-		.end	= 0x203FB800 + 5,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= IRQ_PF9,
-		.end	= IRQ_PF9,
-		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
-	},
-};
-
-static struct platform_device dm9000_device = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-static struct resource sl811_hcd_resources[] = {
-	{
-		.start = 0x20340000,
-		.end = 0x20340000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20340004,
-		.end = 0x20340004,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = CONFIG_USB_SL811_BFIN_IRQ,
-		.end = CONFIG_USB_SL811_BFIN_IRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-void sl811_port_power(struct device *dev, int is_on)
-{
-	gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
-	gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
-
-}
-#endif
-
-static struct sl811_platform_data sl811_priv = {
-	.potpg = 10,
-	.power = 250,       /* == 500mA */
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-	.port_power = &sl811_port_power,
-#endif
-};
-
-static struct platform_device sl811_hcd_device = {
-	.name = "sl811-hcd",
-	.id = 0,
-	.dev = {
-		.platform_data = &sl811_priv,
-	},
-	.num_resources = ARRAY_SIZE(sl811_hcd_resources),
-	.resource = sl811_hcd_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-static struct resource isp1362_hcd_resources[] = {
-	{
-		.start = 0x20360000,
-		.end = 0x20360000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20360004,
-		.end = 0x20360004,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
-		.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct isp1362_platform_data isp1362_priv = {
-	.sel15Kres = 1,
-	.clknotstop = 0,
-	.oc_enable = 0,
-	.int_act_high = 0,
-	.int_edge_triggered = 0,
-	.remote_wakeup_connected = 0,
-	.no_power_switching = 1,
-	.power_switching_mode = 0,
-};
-
-static struct platform_device isp1362_hcd_device = {
-	.name = "isp1362-hcd",
-	.id = 0,
-	.dev = {
-		.platform_data = &isp1362_priv,
-	},
-	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
-	.resource = isp1362_hcd_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-static struct platform_device bfin_mii_bus = {
-	.name = "bfin_mii_bus",
-};
-
-static struct platform_device bfin_mac_device = {
-	.name = "bfin_mac",
-	.dev.platform_data = &bfin_mii_bus,
-};
-#endif
-
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
-static struct resource net2272_bfin_resources[] = {
-	{
-		.start = 0x20300000,
-		.end = 0x20300000 + 0x100,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PF7,
-		.end = IRQ_PF7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct platform_device net2272_bfin_device = {
-	.name = "net2272",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
-	.resource = net2272_bfin_resources,
-};
-#endif
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
-static struct mtd_partition bfin_spi_flash_partitions[] = {
-	{
-		.name = "bootloader(spi)",
-		.size = 0x00020000,
-		.offset = 0,
-		.mask_flags = MTD_CAP_ROM
-	}, {
-		.name = "linux kernel(spi)",
-		.size = 0xe0000,
-		.offset = 0x20000
-	}, {
-		.name = "file system(spi)",
-		.size = 0x700000,
-		.offset = 0x00100000,
-	}
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
-	.name = "m25p80",
-	.parts = bfin_spi_flash_partitions,
-	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-	.type = "m25p64",
-};
-
-/* SPI flash chip (m25p64) */
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
-	.enable_dma = 0,         /* use dma transfer with this chip*/
-	.bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
-/* SPI ADC chip */
-static struct bfin5xx_spi_chip spi_adc_chip_info = {
-	.enable_dma = 1,         /* use dma transfer with this chip*/
-	.bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
-static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
-	.bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-	.ctl_reg	= 0x4, /* send zero */
-	.enable_dma	= 0,
-	.bits_per_word	= 8,
-	.cs_change_per_word = 1,
-};
-#endif
-
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
-static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-
-static const struct ad7877_platform_data bfin_ad7877_ts_info = {
-	.model			= 7877,
-	.vref_delay_usecs	= 50,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.pressure_max		= 1000,
-	.pressure_min		= 0,
-	.stopacq_polarity 	= 1,
-	.first_conversion_delay = 3,
-	.acquisition_time 	= 1,
-	.averaging 		= 1,
-	.pen_down_acc_interval 	= 1,
-};
-#endif
-
-static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
-	{
-		/* the modalias must be the same as spi device driver name */
-		.modalias = "m25p80", /* Name of spi_driver for this device */
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0, /* Framework bus number */
-		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
-		.platform_data = &bfin_spi_flash_data,
-		.controller_data = &spi_flash_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
-	{
-		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
-		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0, /* Framework bus number */
-		.chip_select = 1, /* Framework chip select. */
-		.platform_data = NULL, /* No spi_driver specific config */
-		.controller_data = &spi_adc_chip_info,
-	},
-#endif
-
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
-	{
-		.modalias = "ad1836-spi",
-		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
-		.controller_data = &ad1836_spi_chip_info,
-	},
-#endif
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-	{
-		.modalias = "ad9960-spi",
-		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = &ad9960_spi_chip_info,
-	},
-#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-	{
-		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-#if defined(CONFIG_PBX)
-	{
-		.modalias = "fxs-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J11_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "fxo-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J19_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
-	{
-		.modalias		= "ad7877",
-		.platform_data		= &bfin_ad7877_ts_info,
-		.irq			= IRQ_PF6,
-		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num	= 0,
-		.chip_select  = 1,
-		.controller_data = &spi_ad7877_chip_info,
-	},
-#endif
-};
-
-/* SPI controller data */
-static struct bfin5xx_spi_master bfin_spi0_info = {
-	.num_chipselect = 8,
-	.enable_dma = 1,  /* master has the ability to do dma transfer */
-	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
-};
-
-/* SPI (0) */
-static struct resource bfin_spi0_resource[] = {
-	[0] = {
-		.start = SPI0_REGBASE,
-		.end   = SPI0_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-		},
-	[1] = {
-		.start = CH_SPI,
-		.end   = CH_SPI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_spi0_device = {
-	.name = "bfin-spi",
-	.id = 0, /* Bus number */
-	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
-	.resource = bfin_spi0_resource,
-	.dev = {
-		.platform_data = &bfin_spi0_info, /* Passed to driver */
-	},
-};
-#endif  /* spi master and devices */
-
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-static struct platform_device bfin_fb_device = {
-	.name = "bf537-lq035",
-};
-#endif
-
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
-	.name = "bfin-adv7393",
-};
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device bfin_uart_device = {
-	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir0_device = {
-	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
-	.resource = bfin_sir0_resources,
-};
-#endif
-#ifdef CONFIG_BFIN_SIR1
-static struct resource bfin_sir1_resources[] = {
-	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir1_device = {
-	.name = "bfin_sir",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
-	.resource = bfin_sir1_resources,
-};
-#endif
-#endif
-
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
-static struct resource bfin_twi0_resource[] = {
-	[0] = {
-		.start = TWI0_REGBASE,
-		.end   = TWI0_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TWI,
-		.end   = IRQ_TWI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c_bfin_twi_device = {
-	.name = "i2c-bfin-twi",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
-	.resource = bfin_twi0_resource,
-};
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
-static struct platform_device bfin_sport0_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 0,
-};
-
-static struct platform_device bfin_sport1_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 1,
-};
-#endif
-
-static struct platform_device *stamp_devices[] __initdata = {
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
-	&bfin_pcmcia_cf_device,
-#endif
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-	&rtc_device,
-#endif
-
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-	&sl811_hcd_device,
-#endif
-
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-	&isp1362_hcd_device,
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-	&smc91x_device,
-#endif
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-	&dm9000_device,
-#endif
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-	&bfin_mii_bus,
-	&bfin_mac_device,
-#endif
-
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
-	&net2272_bfin_device,
-#endif
-
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
-	&bfin_isp1760_device,
-#endif
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	&bfin_spi0_device,
-#endif
-
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-	&bfin_fb_device,
-#endif
-
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-	&bfin_fb_adv7393_device,
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-	&bfin_sir0_device,
-#endif
-#ifdef CONFIG_BFIN_SIR1
-	&bfin_sir1_device,
-#endif
-#endif
-
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
-	&i2c_bfin_twi_device,
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
-	&bfin_sport0_uart_device,
-	&bfin_sport1_uart_device,
-#endif
-};
-
-static int __init generic_init(void)
-{
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	spi_register_board_info(bfin_spi_board_info,
-				ARRAY_SIZE(bfin_spi_board_info));
-#endif
-
-	return 0;
-}
-
-arch_initcall(generic_init);
-
-void native_machine_restart(char *cmd)
-{
-	/* workaround reboot hang when booting from SPI */
-	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
-}
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-void bfin_get_ether_addr(char *addr)
-{
-	random_ether_addr(addr);
-	printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
-}
-EXPORT_SYMBOL(bfin_get_ether_addr);
-#endif
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index db7d3a3..3c15981 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -134,9 +134,9 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -156,23 +156,13 @@
 	},
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 590eb3a..4e1de1e 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -289,9 +289,9 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -364,23 +364,13 @@
 		.controller_data = &ad9960_spi_chip_info,
 	},
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 7,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 3f4f203..53ad10f 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -108,9 +108,9 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -160,23 +160,13 @@
 	},
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 7,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index 9cb3912..1bfd80c 100644
--- a/arch/blackfin/mach-bf537/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf537/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -110,7 +110,7 @@
 #define ANOMALY_05000301 (1)
 /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
 #define ANOMALY_05000304 (__SILICON_REVISION__ < 3)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 3)
 /* SCKELOW Bit Does Not Maintain State Through Hibernate */
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
@@ -168,9 +168,12 @@
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index b3f87e1..9e34700 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -144,7 +144,7 @@
 	CH_UART0_TX,
 	CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART0_CTS_PIN,
 	CONFIG_UART0_RTS_PIN,
 #endif
@@ -158,7 +158,7 @@
 	CH_UART1_TX,
 	CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART1_CTS_PIN,
 	CONFIG_UART1_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h
index e130b4f..3a56998 100644
--- a/arch/blackfin/mach-bf538/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf538/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -120,13 +120,17 @@
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000230 (0)
 #define ANOMALY_05000263 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
index 40503b6..3c2811e 100644
--- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
@@ -144,7 +144,7 @@
 	CH_UART0_TX,
 	CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART0_CTS_PIN,
 	CONFIG_UART0_RTS_PIN,
 #endif
@@ -158,7 +158,7 @@
 	CH_UART1_TX,
 	CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART1_CTS_PIN,
 	CONFIG_UART1_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 23d03c5..882e40c 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -2,12 +2,12 @@
  * File: include/asm-blackfin/mach-bf548/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
- *  - Revision G, 08/07/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
+ *  - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -91,8 +91,6 @@
 #define ANOMALY_05000371 (__SILICON_REVISION__ < 2)
 /* USB DP/DM Data Pins May Lose State When Entering Hibernate */
 #define ANOMALY_05000372 (__SILICON_REVISION__ < 1)
-/* Mobile DDR Operation Not Functional */
-#define ANOMALY_05000377 (1)
 /* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
 #define ANOMALY_05000378 (__SILICON_REVISION__ < 2)
 /* 16-Bit NAND FLASH Boot Mode Is Not Functional */
@@ -157,8 +155,22 @@
 #define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
 /* Software System Reset Corrupts PLL_LOCKCNT Register */
 #define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
+/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
+#define ANOMALY_05000431 (__SILICON_REVISION__ < 3)
+/* OTP Write Accesses Not Supported */
+#define ANOMALY_05000442 (__SILICON_REVISION__ < 1)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
+/* CDMAPRIO and L2DMAPRIO Bits in the SYSCR Register Are Not Functional */
+#define ANOMALY_05000446 (1)
+/* UART IrDA Receiver Fails on Extended Bit Pulses */
+#define ANOMALY_05000447 (1)
+/* DDR Clock Duty Cycle Spec Violation (tCH, tCL) */
+#define ANOMALY_05000448 (__SILICON_REVISION__ == 1)
+/* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */
+#define ANOMALY_05000449 (__SILICON_REVISION__ == 1)
+/* USB DMA Mode 1 Short Packet Data Corruption */
+#define ANOMALY_05000450 (1
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@@ -171,6 +183,8 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
index e4cf35e..c05e79c 100644
--- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
@@ -63,7 +63,7 @@
 #define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v)
 #define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF)
 
-#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
+#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART2_CTSRTS)
 # define CONFIG_SERIAL_BFIN_CTSRTS
 
 # ifndef CONFIG_UART0_CTS_PIN
@@ -74,12 +74,12 @@
 #  define CONFIG_UART0_RTS_PIN -1
 # endif
 
-# ifndef CONFIG_UART1_CTS_PIN
-#  define CONFIG_UART1_CTS_PIN -1
+# ifndef CONFIG_UART2_CTS_PIN
+#  define CONFIG_UART2_CTS_PIN -1
 # endif
 
-# ifndef CONFIG_UART1_RTS_PIN
-#  define CONFIG_UART1_RTS_PIN -1
+# ifndef CONFIG_UART2_RTS_PIN
+#  define CONFIG_UART2_RTS_PIN -1
 # endif
 #endif
 
@@ -130,7 +130,7 @@
 	CH_UART0_TX,
 	CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART0_CTS_PIN,
 	CONFIG_UART0_RTS_PIN,
 #endif
@@ -144,6 +144,10 @@
 	CH_UART1_TX,
 	CH_UART1_RX,
 #endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+	0,
+	0,
+#endif
 	},
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART2
@@ -154,7 +158,7 @@
 	CH_UART2_TX,
 	CH_UART2_RX,
 #endif
-#ifdef CONFIG_BFIN_UART2_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART2_CTS_PIN,
 	CONFIG_UART2_RTS_PIN,
 #endif
@@ -168,6 +172,10 @@
 	CH_UART3_TX,
 	CH_UART3_RX,
 #endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+	0,
+	0,
+#endif
 	},
 #endif
 };
diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h
index 60299a7..f194625 100644
--- a/arch/blackfin/mach-bf548/include/mach/irq.h
+++ b/arch/blackfin/mach-bf548/include/mach/irq.h
@@ -123,8 +123,8 @@
 #define IRQ_MXVR_ERROR		BFIN_IRQ(51)	/* MXVR Status (Error) Interrupt */
 #define IRQ_MXVR_MSG		BFIN_IRQ(52)	/* MXVR Message Interrupt */
 #define IRQ_MXVR_PKT		BFIN_IRQ(53)	/* MXVR Packet Interrupt */
-#define IRQ_EPP1_ERROR		BFIN_IRQ(54)	/* EPPI1 Error Interrupt */
-#define IRQ_EPP2_ERROR		BFIN_IRQ(55)	/* EPPI2 Error Interrupt */
+#define IRQ_EPPI1_ERROR		BFIN_IRQ(54)	/* EPPI1 Error Interrupt */
+#define IRQ_EPPI2_ERROR		BFIN_IRQ(55)	/* EPPI2 Error Interrupt */
 #define IRQ_UART3_ERROR		BFIN_IRQ(56)	/* UART3 Status (Error) Interrupt */
 #define IRQ_HOST_ERROR		BFIN_IRQ(57)	/* HOST Status (Error) Interrupt */
 #define IRQ_PIXC_ERROR		BFIN_IRQ(59)	/* PIXC Status (Error) Interrupt */
@@ -361,8 +361,8 @@
 #define IRQ_UART2_ERR 		IRQ_UART2_ERROR
 #define IRQ_CAN0_ERR  		IRQ_CAN0_ERROR
 #define IRQ_MXVR_ERR  		IRQ_MXVR_ERROR
-#define IRQ_EPP1_ERR  		IRQ_EPP1_ERROR
-#define IRQ_EPP2_ERR  		IRQ_EPP2_ERROR
+#define IRQ_EPPI1_ERR  		IRQ_EPPI1_ERROR
+#define IRQ_EPPI2_ERR  		IRQ_EPPI2_ERROR
 #define IRQ_UART3_ERR 		IRQ_UART3_ERROR
 #define IRQ_HOST_ERR  		IRQ_HOST_ERROR
 #define IRQ_PIXC_ERR  		IRQ_PIXC_ERROR
diff --git a/arch/blackfin/mach-bf561/boards/Kconfig b/arch/blackfin/mach-bf561/boards/Kconfig
index e41a67b..e4bc6d7 100644
--- a/arch/blackfin/mach-bf561/boards/Kconfig
+++ b/arch/blackfin/mach-bf561/boards/Kconfig
@@ -19,9 +19,4 @@
 	help
 	  CM-BF561 support for EVAL- and DEV-Board.
 
-config GENERIC_BF561_BOARD
-	bool "Generic"
-	help
-	  Generic or Custom board support.
-
 endchoice
diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile
index 04add01..3a15255 100644
--- a/arch/blackfin/mach-bf561/boards/Makefile
+++ b/arch/blackfin/mach-bf561/boards/Makefile
@@ -2,7 +2,6 @@
 # arch/blackfin/mach-bf561/boards/Makefile
 #
 
-obj-$(CONFIG_GENERIC_BF561_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN561_BLUETECHNIX_CM)   += cm_bf561.o
 obj-$(CONFIG_BFIN561_EZKIT)            += ezkit.o
 obj-$(CONFIG_BFIN561_TEPLA)            += tepla.o
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 6880d1e..f623c6b 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -105,9 +105,9 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -155,14 +155,13 @@
 		.controller_data = &ad9960_spi_chip_info,
 	},
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf561/boards/generic_board.c b/arch/blackfin/mach-bf561/boards/generic_board.c
deleted file mode 100644
index 0ba366a..0000000
--- a/arch/blackfin/mach-bf561/boards/generic_board.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * File:         arch/blackfin/mach-bf561/generic_board.c
- * Based on:     arch/blackfin/mach-bf533/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
- *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
-	{
-		.start = 0x2C010300,
-		.end = 0x2C010300 + 16,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PROG_INTB,
-		.end = IRQ_PROG_INTB,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	}, {
-		.start = IRQ_PF9,
-		.end = IRQ_PF9,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name = "smc91x",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(smc91x_resources),
-	.resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir0_device = {
-	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
-	.resource = bfin_sir0_resources,
-};
-#endif
-#endif
-
-static struct platform_device *generic_board_devices[] __initdata = {
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-	&smc91x_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-	&bfin_sir0_device,
-#endif
-#endif
-};
-
-static int __init generic_board_init(void)
-{
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	return platform_add_devices(generic_board_devices,
-				    ARRAY_SIZE(generic_board_devices));
-}
-
-arch_initcall(generic_board_init);
diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index 1a9e175..d0b0b35 100644
--- a/arch/blackfin/mach-bf561/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf561/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -224,7 +224,7 @@
 #define ANOMALY_05000301 (1)
 /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
 #define ANOMALY_05000302 (1)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
 /* SCKELOW Bit Does Not Maintain State Through Hibernate */
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 5)
@@ -283,8 +283,11 @@
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index 043bfcf..ca8c5f6 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -134,7 +134,7 @@
 	CH_UART_TX,
 	CH_UART_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART0_CTS_PIN,
 	CONFIG_UART0_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
index 98133b9..80d39b2 100644
--- a/arch/blackfin/mach-common/arch_checks.c
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -62,3 +62,12 @@
 #if (CONFIG_BOOT_LOAD & 0x3)
 # error "The kernel load address must be 4 byte aligned"
 #endif
+
+/* The entire kernel must be able to make a 24bit pcrel call to start of L1 */
+#if ((0xffffffff - L1_CODE_START + 1) + CONFIG_BOOT_LOAD) > 0x1000000
+# error "The kernel load address is too high; keep it below 10meg for safety"
+#endif
+
+#if ANOMALY_05000448
+# error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes.
+#endif
diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S
index 3c98dac..aa0648c 100644
--- a/arch/blackfin/mach-common/cache.S
+++ b/arch/blackfin/mach-common/cache.S
@@ -66,11 +66,33 @@
 
 /* Invalidate all instruction cache lines assocoiated with this memory area */
 ENTRY(_blackfin_icache_flush_range)
+/*
+ * Walkaround to avoid loading wrong instruction after invalidating icache
+ * and following sequence is met.
+ *
+ * 1) One instruction address is cached in the instruction cache.
+ * 2) This instruction in SDRAM is changed.
+ * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
+ * 4) This instruction is executed again, but the old one is loaded.
+ */
+	P0 = R0;
+	IFLUSH[P0];
 	do_flush IFLUSH, , nop
 ENDPROC(_blackfin_icache_flush_range)
 
 /* Flush all cache lines assocoiated with this area of memory. */
 ENTRY(_blackfin_icache_dcache_flush_range)
+/*
+ * Walkaround to avoid loading wrong instruction after invalidating icache
+ * and following sequence is met.
+ *
+ * 1) One instruction address is cached in the instruction cache.
+ * 2) This instruction in SDRAM is changed.
+ * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
+ * 4) This instruction is executed again, but the old one is loaded.
+ */
+	P0 = R0;
+	IFLUSH[P0];
 	do_flush FLUSH, IFLUSH
 ENDPROC(_blackfin_icache_dcache_flush_range)
 
diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c
index 9dddb6f..3539365 100644
--- a/arch/blackfin/mach-common/clocks-init.c
+++ b/arch/blackfin/mach-common/clocks-init.c
@@ -17,7 +17,7 @@
 #define SDGCTL_WIDTH (1 << 31)	/* SDRAM external data path width */
 #define PLL_CTL_VAL \
 	(((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
-	 (PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0))
+	 (PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000))
 
 __attribute__((l1_text))
 static void do_sync(void)
diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S
index 4da50bc..8009a51 100644
--- a/arch/blackfin/mach-common/dpmc_modes.S
+++ b/arch/blackfin/mach-common/dpmc_modes.S
@@ -376,10 +376,22 @@
 #endif
 
 #ifdef PINT0_ASSIGN
+	PM_SYS_PUSH(PINT0_MASK_SET)
+	PM_SYS_PUSH(PINT1_MASK_SET)
+	PM_SYS_PUSH(PINT2_MASK_SET)
+	PM_SYS_PUSH(PINT3_MASK_SET)
 	PM_SYS_PUSH(PINT0_ASSIGN)
 	PM_SYS_PUSH(PINT1_ASSIGN)
 	PM_SYS_PUSH(PINT2_ASSIGN)
 	PM_SYS_PUSH(PINT3_ASSIGN)
+	PM_SYS_PUSH(PINT0_INVERT_SET)
+	PM_SYS_PUSH(PINT1_INVERT_SET)
+	PM_SYS_PUSH(PINT2_INVERT_SET)
+	PM_SYS_PUSH(PINT3_INVERT_SET)
+	PM_SYS_PUSH(PINT0_EDGE_SET)
+	PM_SYS_PUSH(PINT1_EDGE_SET)
+	PM_SYS_PUSH(PINT2_EDGE_SET)
+	PM_SYS_PUSH(PINT3_EDGE_SET)
 #endif
 
 	PM_SYS_PUSH(EBIU_AMBCTL0)
@@ -714,10 +726,22 @@
 	PM_SYS_POP(EBIU_AMBCTL0)
 
 #ifdef PINT0_ASSIGN
+	PM_SYS_POP(PINT3_EDGE_SET)
+	PM_SYS_POP(PINT2_EDGE_SET)
+	PM_SYS_POP(PINT1_EDGE_SET)
+	PM_SYS_POP(PINT0_EDGE_SET)
+	PM_SYS_POP(PINT3_INVERT_SET)
+	PM_SYS_POP(PINT2_INVERT_SET)
+	PM_SYS_POP(PINT1_INVERT_SET)
+	PM_SYS_POP(PINT0_INVERT_SET)
 	PM_SYS_POP(PINT3_ASSIGN)
 	PM_SYS_POP(PINT2_ASSIGN)
 	PM_SYS_POP(PINT1_ASSIGN)
 	PM_SYS_POP(PINT0_ASSIGN)
+	PM_SYS_POP(PINT3_MASK_SET)
+	PM_SYS_POP(PINT2_MASK_SET)
+	PM_SYS_POP(PINT1_MASK_SET)
+	PM_SYS_POP(PINT0_MASK_SET)
 #endif
 
 #ifdef SICA_IWR1
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 88de053..21e65a3 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -600,6 +600,19 @@
 	p2 = [p2];
 
 	[p2+(TASK_THREAD+THREAD_KSP)] = sp;
+#ifdef CONFIG_IPIPE
+	r0 = sp;
+	SP += -12;
+	call ___ipipe_syscall_root;
+	SP += 12;
+	cc = r0 == 1;
+	if cc jump .Lsyscall_really_exit;
+	cc = r0 == -1;
+	if cc jump .Lresume_userspace;
+	r3 = [sp + PT_R3];
+	r4 = [sp + PT_R4];
+	p0 = [sp + PT_ORIG_P0];
+#endif /* CONFIG_IPIPE */
 
 	/* Check the System Call */
 	r7 = __NR_syscall;
@@ -654,6 +667,17 @@
 	r7 =  r7 & r4;
 
 .Lsyscall_resched:
+#ifdef CONFIG_IPIPE
+	cc = BITTST(r7, TIF_IRQ_SYNC);
+	if !cc jump .Lsyscall_no_irqsync;
+	[--sp] = reti;
+	r0 = [sp++];
+	SP += -12;
+	call ___ipipe_sync_root;
+	SP += 12;
+	jump .Lresume_userspace_1;
+.Lsyscall_no_irqsync:
+#endif
 	cc = BITTST(r7, TIF_NEED_RESCHED);
 	if !cc jump .Lsyscall_sigpending;
 
@@ -685,6 +709,10 @@
 .Lsyscall_really_exit:
 	r5 = [sp + PT_RESERVED];
 	rets = r5;
+#ifdef CONFIG_IPIPE
+	[--sp] = reti;
+	r5 = [sp++];
+#endif /* CONFIG_IPIPE */
 	rts;
 ENDPROC(_system_call)
 
@@ -771,6 +799,15 @@
 ENDPROC(_resume)
 
 ENTRY(_ret_from_exception)
+#ifdef CONFIG_IPIPE
+	[--sp] = rets;
+	SP += -12;
+	call ___ipipe_check_root
+	SP += 12
+	rets = [sp++];
+	cc = r0 == 0;
+	if cc jump 4f;                /* not on behalf of Linux, get out */
+#endif /* CONFIG_IPIPE */
 	p2.l = lo(IPEND);
 	p2.h = hi(IPEND);
 
@@ -827,6 +864,28 @@
 	rts;
 ENDPROC(_ret_from_exception)
 
+#ifdef CONFIG_IPIPE
+
+_sync_root_irqs:
+	[--sp] = reti;		/* Reenable interrupts */
+	r0 = [sp++];
+	jump.l ___ipipe_sync_root
+
+_resume_kernel_from_int:
+	r0.l = _sync_root_irqs
+	r0.h = _sync_root_irqs
+	[--sp] = rets;
+	[--sp] = ( r7:4, p5:3 );
+	SP += -12;
+	call ___ipipe_call_irqtail
+	SP += 12;
+	( r7:4, p5:3 ) = [sp++];
+	rets = [sp++];
+	rts
+#else
+#define _resume_kernel_from_int	 2f
+#endif
+
 ENTRY(_return_from_int)
 	/* If someone else already raised IRQ 15, do nothing.  */
 	csync;
@@ -848,7 +907,7 @@
 	r1 = r0 - r1;
 	r2 = r0 & r1;
 	cc = r2 == 0;
-	if !cc jump 2f;
+	if !cc jump _resume_kernel_from_int;
 
 	/* Lower the interrupt level to 15.  */
 	p0.l = lo(EVT15);
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 43c4eb9..0069c2d 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -235,6 +235,7 @@
 
 #ifdef CONFIG_IPIPE
 ENTRY(___ipipe_call_irqtail)
+	p0 = r0;
 	r0.l = 1f;
 	r0.h = 1f;
 	reti = r0;
@@ -242,9 +243,6 @@
 1:
 	[--sp] = rets;
 	[--sp] = ( r7:4, p5:3 );
-	p0.l = ___ipipe_irq_tail_hook;
-	p0.h = ___ipipe_irq_tail_hook;
-	p0 = [p0];
 	sp += -12;
 	call (p0);
 	sp += 12;
@@ -259,7 +257,7 @@
 	p0.h = hi(EVT14);
 	[p0] = r0;
 	csync;
-	r0 = 0x401f;
+	r0 = 0x401f (z);
 	sti r0;
 	raise 14;
 	[--sp] = reti;          /* IRQs on. */
@@ -277,11 +275,7 @@
 	p0.h = _bfin_irq_flags;
 	r0 = [p0];
 	sti r0;
-#if 0 /* FIXME: this actually raises scheduling latencies */
-	/* Reenable interrupts */
-	[--sp] = reti;
-	r0 = [sp++];
-#endif
 	rts;
 ENDPROC(___ipipe_call_irqtail)
+
 #endif /* CONFIG_IPIPE */
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 2024945..a7d7b2d 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -161,11 +161,15 @@
 
 static void bfin_internal_mask_irq(unsigned int irq)
 {
+	unsigned long flags;
+
 #ifdef CONFIG_BF53x
+	local_irq_save_hw(flags);
 	bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
 			     ~(1 << SIC_SYSIRQ(irq)));
 #else
 	unsigned mask_bank, mask_bit;
+	local_irq_save_hw(flags);
 	mask_bank = SIC_SYSIRQ(irq) / 32;
 	mask_bit = SIC_SYSIRQ(irq) % 32;
 	bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) &
@@ -175,15 +179,20 @@
 			     ~(1 << mask_bit));
 #endif
 #endif
+	local_irq_restore_hw(flags);
 }
 
 static void bfin_internal_unmask_irq(unsigned int irq)
 {
+	unsigned long flags;
+
 #ifdef CONFIG_BF53x
+	local_irq_save_hw(flags);
 	bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
 			     (1 << SIC_SYSIRQ(irq)));
 #else
 	unsigned mask_bank, mask_bit;
+	local_irq_save_hw(flags);
 	mask_bank = SIC_SYSIRQ(irq) / 32;
 	mask_bit = SIC_SYSIRQ(irq) % 32;
 	bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) |
@@ -193,6 +202,7 @@
 			     (1 << mask_bit));
 #endif
 #endif
+	local_irq_restore_hw(flags);
 }
 
 #ifdef CONFIG_PM
@@ -390,7 +400,7 @@
 static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle)
 {
 #ifdef CONFIG_IPIPE
-	_set_irq_handler(irq, handle_edge_irq);
+	_set_irq_handler(irq, handle_level_irq);
 #else
 	struct irq_desc *desc = irq_desc + irq;
 	/* May not call generic set_irq_handler() due to spinlock
@@ -1055,13 +1065,18 @@
 #endif
 		default:
 #ifdef CONFIG_IPIPE
-	/*
-	 * We want internal interrupt sources to be masked, because
-	 * ISRs may trigger interrupts recursively (e.g. DMA), but
-	 * interrupts are _not_ masked at CPU level. So let's handle
-	 * them as level interrupts.
-	 */
-			set_irq_handler(irq, handle_level_irq);
+			/*
+			 * We want internal interrupt sources to be
+			 * masked, because ISRs may trigger interrupts
+			 * recursively (e.g. DMA), but interrupts are
+			 * _not_ masked at CPU level. So let's handle
+			 * most of them as level interrupts, except
+			 * the timer interrupt which is special.
+			 */
+			if (irq == IRQ_SYSTMR || irq == IRQ_CORETMR)
+				set_irq_handler(irq, handle_simple_irq);
+			else
+				set_irq_handler(irq, handle_level_irq);
 #else /* !CONFIG_IPIPE */
 			set_irq_handler(irq, handle_simple_irq);
 #endif /* !CONFIG_IPIPE */
@@ -1123,9 +1138,8 @@
 
 #ifdef CONFIG_IPIPE
 	for (irq = 0; irq < NR_IRQS; irq++) {
-		struct irq_desc *desc = irq_desc + irq;
+		struct irq_desc *desc = irq_to_desc(irq);
 		desc->ic_prio = __ipipe_get_irq_priority(irq);
-		desc->thr_prio = __ipipe_get_irqthread_priority(irq);
 	}
 #endif /* CONFIG_IPIPE */
 
@@ -1208,76 +1222,21 @@
 	return IVG15;
 }
 
-int __ipipe_get_irqthread_priority(unsigned irq)
-{
-	int ient, prio;
-	int demux_irq;
-
-	/* The returned priority value is rescaled to [0..IVG13+1]
-	 * with 0 being the lowest effective priority level. */
-
-	if (irq <= IRQ_CORETMR)
-		return IVG13 - irq + 1;
-
-	/* GPIO IRQs are given the priority of the demux
-	 * interrupt. */
-	if (IS_GPIOIRQ(irq)) {
-#if defined(CONFIG_BF54x)
-		u32 bank = PINT_2_BANK(irq2pint_lut[irq - SYS_IRQS]);
-		demux_irq = (bank == 0 ? IRQ_PINT0 :
-				bank == 1 ? IRQ_PINT1 :
-				bank == 2 ? IRQ_PINT2 :
-				IRQ_PINT3);
-#elif defined(CONFIG_BF561)
-		demux_irq = (irq >= IRQ_PF32 ? IRQ_PROG2_INTA :
-				irq >= IRQ_PF16 ? IRQ_PROG1_INTA :
-				IRQ_PROG0_INTA);
-#elif defined(CONFIG_BF52x)
-		demux_irq = (irq >= IRQ_PH0 ? IRQ_PORTH_INTA :
-				irq >= IRQ_PG0 ? IRQ_PORTG_INTA :
-				IRQ_PORTF_INTA);
-#else
-		demux_irq = irq;
-#endif
-		return IVG13 - PRIO_GPIODEMUX(demux_irq) + 1;
-	}
-
-	/* The GPIO demux interrupt is given a lower priority
-	 * than the GPIO IRQs, so that its threaded handler
-	 * unmasks the interrupt line after the decoded IRQs
-	 * have been processed. */
-	prio = PRIO_GPIODEMUX(irq);
-	/* demux irq? */
-	if (prio != -1)
-		return IVG13 - prio;
-
-	for (ient = 0; ient < NR_PERI_INTS; ient++) {
-		struct ivgx *ivg = ivg_table + ient;
-		if (ivg->irqno == irq) {
-			for (prio = 0; prio <= IVG13-IVG7; prio++) {
-				if (ivg7_13[prio].ifirst <= ivg &&
-				    ivg7_13[prio].istop > ivg)
-					return IVG7 - prio;
-			}
-		}
-	}
-
-	return 0;
-}
-
 /* Hw interrupts are disabled on entry (check SAVE_CONTEXT). */
 #ifdef CONFIG_DO_IRQ_L1
 __attribute__((l1_text))
 #endif
 asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
 {
+	struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
+	struct ipipe_domain *this_domain = ipipe_current_domain;
 	struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop;
 	struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst;
-	int irq;
+	int irq, s;
 
 	if (likely(vec == EVT_IVTMR_P)) {
 		irq = IRQ_CORETMR;
-		goto handle_irq;
+		goto core_tick;
 	}
 
 	SSYNC();
@@ -1319,24 +1278,39 @@
 	irq = ivg->irqno;
 
 	if (irq == IRQ_SYSTMR) {
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+core_tick:
+#else
 		bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */
+#endif
 		/* This is basically what we need from the register frame. */
 		__raw_get_cpu_var(__ipipe_tick_regs).ipend = regs->ipend;
 		__raw_get_cpu_var(__ipipe_tick_regs).pc = regs->pc;
-		if (!ipipe_root_domain_p)
-			__raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
-		else
+		if (this_domain != ipipe_root_domain)
 			__raw_get_cpu_var(__ipipe_tick_regs).ipend &= ~0x10;
+		else
+			__raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
 	}
 
-handle_irq:
+#ifndef CONFIG_GENERIC_CLOCKEVENTS
+core_tick:
+#endif
+	if (this_domain == ipipe_root_domain) {
+		s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
+		barrier();
+	}
 
 	ipipe_trace_irq_entry(irq);
 	__ipipe_handle_irq(irq, regs);
-       ipipe_trace_irq_exit(irq);
+	ipipe_trace_irq_exit(irq);
 
-       if (ipipe_root_domain_p)
-		return !test_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status));
+	if (this_domain == ipipe_root_domain) {
+		set_thread_flag(TIF_IRQ_SYNC);
+		if (!s) {
+			__clear_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
+			return !test_bit(IPIPE_STALL_FLAG, &p->status);
+		}
+	}
 
        return 0;
 }
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 77c9928..93eab61 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -158,10 +158,14 @@
 			kfree(msg);
 			break;
 		case BFIN_IPI_CALL_FUNC:
+			spin_unlock(&msg_queue->lock);
 			ipi_call_function(cpu, msg);
+			spin_lock(&msg_queue->lock);
 			break;
 		case BFIN_IPI_CPU_STOP:
+			spin_unlock(&msg_queue->lock);
 			ipi_cpu_stop(cpu);
+			spin_lock(&msg_queue->lock);
 			kfree(msg);
 			break;
 		default:
@@ -457,7 +461,7 @@
 	smp_flush_data.start = start;
 	smp_flush_data.end = end;
 
-	if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 1))
+	if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 0))
 		printk(KERN_WARNING "SMP: failed to run I-cache flush request on other CPUs\n");
 }
 EXPORT_SYMBOL_GPL(smp_icache_flush_range_others);
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index d0532b7..9c3629b 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -104,7 +104,7 @@
 	}
 }
 
-asmlinkage void init_pda(void)
+asmlinkage void __init init_pda(void)
 {
 	unsigned int cpu = raw_smp_processor_id();
 
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 4eb45c0..153e727 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -638,6 +638,17 @@
 	  and include PCI device scope covered by these DMA
 	  remapping devices.
 
+config DMAR_DEFAULT_ON
+	def_bool y
+	prompt "Enable DMA Remapping Devices by default"
+	depends on DMAR
+	help
+	  Selecting this option will enable a DMAR device at boot time if
+	  one is found. If this option is not selected, DMAR support can
+	  be enabled by passing intel_iommu=on to the kernel. It is
+	  recommended you say N here while the DMAR code remains
+	  experimental.
+
 endmenu
 
 endif
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index 5cfd3d9..e131250 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -507,7 +507,7 @@
 	if (trigger == IOSAPIC_EDGE)
 		return -EINVAL;
 
-	for (i = 0; i <= NR_IRQS; i++) {
+	for (i = 0; i < NR_IRQS; i++) {
 		info = &iosapic_intr_info[i];
 		if (info->trigger == trigger && info->polarity == pol &&
 		    (info->dmode == IOSAPIC_FIXED ||
diff --git a/arch/ia64/kernel/unwind.c b/arch/ia64/kernel/unwind.c
index 67810b7..b6c0e63 100644
--- a/arch/ia64/kernel/unwind.c
+++ b/arch/ia64/kernel/unwind.c
@@ -2149,7 +2149,7 @@
 
 	/* next, remove hash table entries for this table */
 
-	for (index = 0; index <= UNW_HASH_SIZE; ++index) {
+	for (index = 0; index < UNW_HASH_SIZE; ++index) {
 		tmp = unw.cache + unw.hash[index];
 		if (unw.hash[index] >= UNW_CACHE_SIZE
 		    || tmp->ip < table->start || tmp->ip >= table->end)
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_dma.c b/arch/ia64/sn/pci/pcibr/pcibr_dma.c
index e626e50..060df4a 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_dma.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_dma.c
@@ -135,11 +135,10 @@
 	if (SN_DMA_ADDRTYPE(dma_flags) == SN_DMA_ADDR_PHYS)
 		pci_addr = IS_PIC_SOFT(pcibus_info) ?
 				PHYS_TO_DMA(paddr) :
-		    		PHYS_TO_TIODMA(paddr) | dma_attributes;
+				PHYS_TO_TIODMA(paddr);
 	else
-		pci_addr = IS_PIC_SOFT(pcibus_info) ?
-				paddr :
-				paddr | dma_attributes;
+		pci_addr = paddr;
+	pci_addr |= dma_attributes;
 
 	/* Handle Bus mode */
 	if (IS_PCIX(pcibus_info))
diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c
index d01a5d2..db90254 100644
--- a/arch/m68knommu/platform/5206e/config.c
+++ b/arch/m68knommu/platform/5206e/config.c
@@ -17,6 +17,7 @@
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfdma.h>
+#include <asm/mcfuart.h>
 
 /***************************************************************************/
 
diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c
index dfdb5c2e..44baeb2 100644
--- a/arch/m68knommu/platform/528x/config.c
+++ b/arch/m68knommu/platform/528x/config.c
@@ -24,7 +24,6 @@
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
-#include <asm/mcfqspi.h>
 
 #ifdef CONFIG_MTD_PARTITIONS
 #include <linux/mtd/partitions.h>
@@ -33,233 +32,6 @@
 /***************************************************************************/
 
 void coldfire_reset(void);
-static void coldfire_qspi_cs_control(u8 cs, u8 command);
-
-/***************************************************************************/
-
-#if defined(CONFIG_SPI)
-
-#if defined(CONFIG_WILDFIRE)
-#define SPI_NUM_CHIPSELECTS 	0x02
-#define SPI_PAR_VAL		0x07  /* Enable DIN, DOUT, CLK */
-#define SPI_CS_MASK		0x18
-
-#define FLASH_BLOCKSIZE		(1024*64)
-#define FLASH_NUMBLOCKS		16
-#define FLASH_TYPE		"m25p80"
-
-#define M25P80_CS		0
-#define MMC_CS			1
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition stm25p_partitions[] = {
-	/* sflash */
-	[0] = {
-		.name = "stm25p80",
-		.offset = 0x00000000,
-		.size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
-		.mask_flags = 0
-	}
-};
-
-#endif
-
-#elif defined(CONFIG_WILDFIREMOD)
-
-#define SPI_NUM_CHIPSELECTS	0x08
-#define SPI_PAR_VAL		0x07  /* Enable DIN, DOUT, CLK */
-#define SPI_CS_MASK		0x78
-
-#define FLASH_BLOCKSIZE		(1024*64)
-#define FLASH_NUMBLOCKS		64
-#define FLASH_TYPE		"m25p32"
-/* Reserve 1M for the kernel parition */
-#define FLASH_KERNEL_SIZE   (1024 * 1024)
-
-#define M25P80_CS		5
-#define MMC_CS			6
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition stm25p_partitions[] = {
-	/* sflash */
-	[0] = {
-		.name = "kernel",
-		.offset = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
-		.size = FLASH_KERNEL_SIZE,
-		.mask_flags = 0
-	},
-	[1] = {
-		.name = "image",
-		.offset = 0x00000000,
-		.size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
-		.mask_flags = 0
-	},
-	[2] = {
-		.name = "all",
-		.offset = 0x00000000,
-		.size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
-		.mask_flags = 0
-	}
-};
-#endif
-
-#else
-#define SPI_NUM_CHIPSELECTS 	0x04
-#define SPI_PAR_VAL		0x7F  /* Enable DIN, DOUT, CLK, CS0 - CS4 */
-#endif
-
-#ifdef MMC_CS
-static struct coldfire_spi_chip flash_chip_info = {
-	.mode = SPI_MODE_0,
-	.bits_per_word = 16,
-	.del_cs_to_clk = 17,
-	.del_after_trans = 1,
-	.void_write_data = 0
-};
-
-static struct coldfire_spi_chip mmc_chip_info = {
-	.mode = SPI_MODE_0,
-	.bits_per_word = 16,
-	.del_cs_to_clk = 17,
-	.del_after_trans = 1,
-	.void_write_data = 0xFFFF
-};
-#endif
-
-#ifdef M25P80_CS
-static struct flash_platform_data stm25p80_platform_data = {
-	.name = "ST M25P80 SPI Flash chip",
-#ifdef CONFIG_MTD_PARTITIONS
-	.parts = stm25p_partitions,
-	.nr_parts = sizeof(stm25p_partitions) / sizeof(*stm25p_partitions),
-#endif
-	.type = FLASH_TYPE
-};
-#endif
-
-static struct spi_board_info spi_board_info[] __initdata = {
-#ifdef M25P80_CS
-	{
-		.modalias = "m25p80",
-		.max_speed_hz = 16000000,
-		.bus_num = 1,
-		.chip_select = M25P80_CS,
-		.platform_data = &stm25p80_platform_data,
-		.controller_data = &flash_chip_info
-	},
-#endif
-#ifdef MMC_CS
-	{
-		.modalias = "mmc_spi",
-		.max_speed_hz = 16000000,
-		.bus_num = 1,
-		.chip_select = MMC_CS,
-		.controller_data = &mmc_chip_info
-	}
-#endif
-};
-
-static struct coldfire_spi_master coldfire_master_info = {
-	.bus_num = 1,
-	.num_chipselect = SPI_NUM_CHIPSELECTS,
-	.irq_source = MCF5282_QSPI_IRQ_SOURCE,
-	.irq_vector = MCF5282_QSPI_IRQ_VECTOR,
-	.irq_mask = ((0x01 << MCF5282_QSPI_IRQ_SOURCE) | 0x01),
-	.irq_lp = 0x2B,  /* Level 5 and Priority 3 */
-	.par_val = SPI_PAR_VAL,
-	.cs_control = coldfire_qspi_cs_control,
-};
-
-static struct resource coldfire_spi_resources[] = {
-	[0] = {
-		.name = "qspi-par",
-		.start = MCF5282_QSPI_PAR,
-		.end = MCF5282_QSPI_PAR,
-		.flags = IORESOURCE_MEM
-	},
-
-	[1] = {
-		.name = "qspi-module",
-		.start = MCF5282_QSPI_QMR,
-		.end = MCF5282_QSPI_QMR + 0x18,
-		.flags = IORESOURCE_MEM
-	},
-
-	[2] = {
-		.name = "qspi-int-level",
-		.start = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
-		.end = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
-		.flags = IORESOURCE_MEM
-	},
-
-	[3] = {
-		.name = "qspi-int-mask",
-		.start = MCF5282_INTC0 + MCFINTC_IMRL,
-		.end = MCF5282_INTC0 + MCFINTC_IMRL,
-		.flags = IORESOURCE_MEM
-	}
-};
-
-static struct platform_device coldfire_spi = {
-	.name = "spi_coldfire",
-	.id = -1,
-	.resource = coldfire_spi_resources,
-	.num_resources = ARRAY_SIZE(coldfire_spi_resources),
-	.dev = {
-		.platform_data = &coldfire_master_info,
-	}
-};
-
-static void coldfire_qspi_cs_control(u8 cs, u8 command)
-{
-	u8 cs_bit = ((0x01 << cs) << 3) & SPI_CS_MASK;
-
-#if defined(CONFIG_WILDFIRE)
-	u8 cs_mask = ~(((0x01 << cs) << 3) & SPI_CS_MASK);
-#endif
-#if defined(CONFIG_WILDFIREMOD)
-	u8 cs_mask = (cs << 3) & SPI_CS_MASK;
-#endif
-
-	/*
-	 * Don't do anything if the chip select is not
-	 * one of the port qs pins.
-	 */
-	if (command & QSPI_CS_INIT) {
-#if defined(CONFIG_WILDFIRE)
-		MCF5282_GPIO_DDRQS  |= cs_bit;
-		MCF5282_GPIO_PQSPAR &= ~cs_bit;
-#endif
-
-#if defined(CONFIG_WILDFIREMOD)
-		MCF5282_GPIO_DDRQS  |= SPI_CS_MASK;
-		MCF5282_GPIO_PQSPAR &= ~SPI_CS_MASK;
-#endif
-	}
-
-	if (command & QSPI_CS_ASSERT) {
-		MCF5282_GPIO_PORTQS &= ~SPI_CS_MASK;
-		MCF5282_GPIO_PORTQS |= cs_mask;
-	} else if (command & QSPI_CS_DROP) {
-		MCF5282_GPIO_PORTQS |= SPI_CS_MASK;
-	}
-}
-
-static int __init spi_dev_init(void)
-{
-	int retval;
-
-	retval = platform_device_register(&coldfire_spi);
-	if (retval < 0)
-		return retval;
-
-	if (ARRAY_SIZE(spi_board_info))
-		retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
-	return retval;
-}
-
-#endif /* CONFIG_SPI */
 
 /***************************************************************************/
 
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 600eef3..e61465a 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -603,7 +603,7 @@
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
-	select CPU_CAVIUM_OCTEON
+	select SYS_HAS_CPU_CAVIUM_OCTEON
 	help
 	  The Octeon simulator is software performance model of the Cavium
 	  Octeon Processor. It supports simulating Octeon processors on x86
@@ -618,7 +618,7 @@
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_HAS_EARLY_PRINTK
-	select CPU_CAVIUM_OCTEON
+	select SYS_HAS_CPU_CAVIUM_OCTEON
 	select SWAP_IO_SPACE
 	help
 	  This option supports all of the Octeon reference boards from Cavium
@@ -1234,6 +1234,7 @@
 
 config CPU_CAVIUM_OCTEON
 	bool "Cavium Octeon processor"
+	depends on SYS_HAS_CPU_CAVIUM_OCTEON
 	select IRQ_CPU
 	select IRQ_CPU_OCTEON
 	select CPU_HAS_PREFETCH
@@ -1314,6 +1315,9 @@
 config SYS_HAS_CPU_SB1
 	bool
 
+config SYS_HAS_CPU_CAVIUM_OCTEON
+	bool
+
 #
 # CPU may reorder R->R, R->W, W->R, W->W
 # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
@@ -1387,6 +1391,7 @@
 config 64BIT
 	bool "64-bit kernel"
 	depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL
+	select HAVE_SYSCALL_WRAPPERS
 	help
 	  Select this option if you want to build a 64-bit kernel.
 
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 6fd441d..f58d4ff 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -118,7 +118,7 @@
 	 * setup counter 1 (RTC) to tick at full speed
 	 */
 	t = 0xffffff;
-	while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && t--)
+	while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && --t)
 		asm volatile ("nop");
 	if (!t)
 		goto cntr_err;
@@ -127,7 +127,7 @@
 	au_sync();
 
 	t = 0xffffff;
-	while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--)
+	while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t)
 		asm volatile ("nop");
 	if (!t)
 		goto cntr_err;
@@ -135,7 +135,7 @@
 	au_sync();
 
 	t = 0xffffff;
-	while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--)
+	while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t)
 		asm volatile ("nop");
 	if (!t)
 		goto cntr_err;
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index f2baea3..0208723 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -512,7 +512,7 @@
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
+CONFIG_MD_RAID456=y
 CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index 9d5bd2a..5380f1f 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc9
-# Fri Jul 11 23:01:36 2008
+# Linux kernel version: 2.6.29-rc7
+# Wed Mar  4 23:07:16 2009
 #
 CONFIG_MIPS=y
 
@@ -18,8 +18,10 @@
 # CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_MACH_EMMA is not set
 # CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
@@ -39,7 +41,11 @@
 # CONFIG_SNI_RM is not set
 CONFIG_MACH_TX39XX=y
 # CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_MACH_TXX9=y
 CONFIG_TOSHIBA_JMR3927=y
 CONFIG_SOC_TX3927=y
 # CONFIG_TOSHIBA_FPCIB0 is not set
@@ -54,12 +60,14 @@
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_CEVT_TXX9=y
 CONFIG_GPIO_TXX9=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
 # CONFIG_HOTPLUG_CPU is not set
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_GPIO=y
@@ -87,6 +95,7 @@
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -94,6 +103,7 @@
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
 CONFIG_SYS_HAS_CPU_TX39XX=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
@@ -117,14 +127,12 @@
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_UNEVICTABLE_LRU=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -159,6 +167,15 @@
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
@@ -171,7 +188,6 @@
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -188,26 +204,23 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -221,7 +234,7 @@
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -231,12 +244,15 @@
 CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
 CONFIG_MMU=y
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
 
@@ -245,15 +261,12 @@
 #
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -293,6 +306,7 @@
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -302,14 +316,9 @@
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
 #
@@ -323,7 +332,89 @@
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
@@ -336,6 +427,7 @@
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -361,7 +453,6 @@
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -383,6 +474,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -392,6 +486,7 @@
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
@@ -399,6 +494,9 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -406,7 +504,6 @@
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_TC35815=y
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -415,9 +512,11 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -428,6 +527,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_PPP is not set
@@ -440,27 +543,7 @@
 #
 # Input device support
 #
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
 
 #
 # Hardware I/O ports
@@ -517,10 +600,11 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 
 #
-# GPIO Support
+# Memory mapped GPIO expanders:
 #
 
 #
@@ -528,6 +612,11 @@
 #
 
 #
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
 # SPI GPIO expanders:
 #
 # CONFIG_W1 is not set
@@ -542,6 +631,7 @@
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
 CONFIG_TXX9_WDT=y
 
 #
@@ -549,18 +639,21 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -591,16 +684,26 @@
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
@@ -626,27 +729,34 @@
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 CONFIG_RTC_DRV_DS1742=y
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -676,28 +786,17 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
@@ -726,7 +825,16 @@
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_CMDLINE=""
 
 #
@@ -734,15 +842,18 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig
index 83d5c58..1efe977 100644
--- a/arch/mips/configs/rbtx49xx_defconfig
+++ b/arch/mips/configs/rbtx49xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc9
-# Fri Jul 11 23:03:21 2008
+# Linux kernel version: 2.6.29-rc7
+# Wed Mar  4 23:08:06 2009
 #
 CONFIG_MIPS=y
 
@@ -18,8 +18,10 @@
 # CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_MACH_EMMA is not set
 # CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
@@ -39,20 +41,28 @@
 # CONFIG_SNI_RM is not set
 # CONFIG_MACH_TX39XX is not set
 CONFIG_MACH_TX49XX=y
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_MACH_TXX9=y
 CONFIG_TOSHIBA_RBTX4927=y
 CONFIG_TOSHIBA_RBTX4938=y
+CONFIG_TOSHIBA_RBTX4939=y
 CONFIG_SOC_TX4927=y
 CONFIG_SOC_TX4938=y
+CONFIG_SOC_TX4939=y
+CONFIG_TXX9_7SEGLED=y
 # CONFIG_TOSHIBA_FPCIB0 is not set
 CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y
 
 #
 # Multiplex Pin Select
 #
-CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y
+# CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 is not set
 # CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set
 # CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set
+CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP=y
 CONFIG_PCI_TX4927=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
@@ -64,14 +74,18 @@
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
 CONFIG_CEVT_R4K=y
 CONFIG_CEVT_TXX9=y
+CONFIG_CSRC_R4K_LIB=y
 CONFIG_CSRC_R4K=y
 CONFIG_GPIO_TXX9=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
 # CONFIG_HOTPLUG_CPU is not set
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_GPIO=y
@@ -100,6 +114,7 @@
 CONFIG_CPU_TX49XX=y
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -107,6 +122,7 @@
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
 CONFIG_SYS_HAS_CPU_TX49XX=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
@@ -134,13 +150,12 @@
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -176,6 +191,15 @@
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -190,7 +214,6 @@
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -207,30 +230,26 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
+CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -244,7 +263,8 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_FREEZER is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -254,12 +274,15 @@
 CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 CONFIG_MMU=y
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
 
@@ -268,15 +291,12 @@
 #
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -318,6 +338,7 @@
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -327,14 +348,9 @@
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
 #
@@ -348,7 +364,90 @@
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
@@ -365,9 +464,60 @@
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_TIMINGS=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDE_TX4938=y
+CONFIG_BLK_DEV_IDE_TX4939=y
+CONFIG_BLK_DEV_IDEDMA=y
 
 #
 # SCSI device support
@@ -390,7 +540,6 @@
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -412,15 +561,19 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+CONFIG_SMC91X=y
 # CONFIG_DM9000 is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
@@ -429,6 +582,9 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -436,7 +592,6 @@
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_TC35815=y
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -445,9 +600,11 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -458,6 +615,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_PPP is not set
@@ -502,6 +663,7 @@
 CONFIG_SERIAL_TXX9_STDSERIAL=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -517,17 +679,19 @@
 #
 # SPI Master Controller Drivers
 #
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_TXX9=y
 
 #
 # SPI Protocol Masters
 #
-CONFIG_EEPROM_AT25=y
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 
 #
-# GPIO Support
+# Memory mapped GPIO expanders:
 #
 
 #
@@ -535,8 +699,14 @@
 #
 
 #
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
@@ -550,6 +720,7 @@
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
 CONFIG_TXX9_WDT=m
 
 #
@@ -557,18 +728,21 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -599,15 +773,27 @@
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
@@ -628,35 +814,47 @@
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 CONFIG_RTC_DRV_RS5C348=y
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 CONFIG_RTC_DRV_DS1742=y
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_TX4939=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -687,30 +885,19 @@
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
@@ -740,7 +927,16 @@
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_CMDLINE=""
 
 #
@@ -748,15 +944,18 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index ac5d541..6c5b409 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -3,6 +3,8 @@
 /*
  * Architecture specific compatibility types
  */
+#include <linux/seccomp.h>
+#include <linux/thread_info.h>
 #include <linux/types.h>
 #include <asm/page.h>
 #include <asm/ptrace.h>
@@ -218,4 +220,9 @@
 	compat_ulong_t	__unused2;
 };
 
+static inline int is_compat_task(void)
+{
+	return test_thread_flag(TIF_32BIT);
+}
+
 #endif /* _ASM_COMPAT_H */
diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h
index 43baed1..134e1fc 100644
--- a/arch/mips/include/asm/hazards.h
+++ b/arch/mips/include/asm/hazards.h
@@ -138,7 +138,8 @@
 		__instruction_hazard();					\
 } while (0)
 
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON)
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
+      defined(CONFIG_CPU_R5500)
 
 /*
  * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
diff --git a/arch/mips/include/asm/prefetch.h b/arch/mips/include/asm/prefetch.h
index 1785083..a56594f 100644
--- a/arch/mips/include/asm/prefetch.h
+++ b/arch/mips/include/asm/prefetch.h
@@ -26,7 +26,7 @@
  * Pref_WriteBackInvalidate is a nop and Pref_PrepareForStore is broken in
  * current versions due to erratum G105.
  *
- * VR7701 only implements the Load prefetch.
+ * VR5500 (including VR5701 and VR7701) only implement load prefetch.
  *
  * Finally MIPS32 and MIPS64 implement all of the following hints.
  */
diff --git a/arch/mips/include/asm/seccomp.h b/arch/mips/include/asm/seccomp.h
index 36ed440..a6772e9 100644
--- a/arch/mips/include/asm/seccomp.h
+++ b/arch/mips/include/asm/seccomp.h
@@ -1,6 +1,5 @@
 #ifndef __ASM_SECCOMP_H
 
-#include <linux/thread_info.h>
 #include <linux/unistd.h>
 
 #define __NR_seccomp_read __NR_read
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index a7162a4..1bdbcad 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -149,6 +149,7 @@
 	case CPU_R4650:
 	case CPU_R4700:
 	case CPU_R5000:
+	case CPU_R5500:
 	case CPU_NEVADA:
 	case CPU_4KC:
 	case CPU_4KEC:
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index a0ff2b6..4b4007b 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -111,7 +111,6 @@
 			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
 #endif
 		seq_printf(p, " %14s", irq_desc[i].chip->name);
-		seq_printf(p, "-%-8s", irq_desc[i].name);
 		seq_printf(p, "  %s", action->name);
 
 		for (action=action->next; action; action = action->next)
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index aa2c55e..1a86f84 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -32,6 +32,7 @@
 #include <linux/module.h>
 #include <linux/binfmts.h>
 #include <linux/security.h>
+#include <linux/syscalls.h>
 #include <linux/compat.h>
 #include <linux/vfs.h>
 #include <linux/ipc.h>
@@ -63,9 +64,9 @@
 #define merge_64(r1, r2) ((((r2) & 0xffffffffUL) << 32) + ((r1) & 0xffffffffUL))
 #endif
 
-asmlinkage unsigned long
-sys32_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
-         unsigned long flags, unsigned long fd, unsigned long pgoff)
+SYSCALL_DEFINE6(32_mmap2, unsigned long, addr, unsigned long, len,
+	unsigned long, prot, unsigned long, flags, unsigned long, fd,
+	unsigned long, pgoff)
 {
 	struct file * file = NULL;
 	unsigned long error;
@@ -121,21 +122,21 @@
 	int	rlim_max;
 };
 
-asmlinkage long sys32_truncate64(const char __user * path,
-	unsigned long __dummy, int a2, int a3)
+SYSCALL_DEFINE4(32_truncate64, const char __user *, path,
+	unsigned long, __dummy, unsigned long, a2, unsigned long, a3)
 {
 	return sys_truncate(path, merge_64(a2, a3));
 }
 
-asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long __dummy,
-	int a2, int a3)
+SYSCALL_DEFINE4(32_ftruncate64, unsigned long, fd, unsigned long, __dummy,
+	unsigned long, a2, unsigned long, a3)
 {
 	return sys_ftruncate(fd, merge_64(a2, a3));
 }
 
-asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high,
-			    unsigned int offset_low, loff_t __user * result,
-			    unsigned int origin)
+SYSCALL_DEFINE5(32_llseek, unsigned long, fd, unsigned long, offset_high,
+	unsigned long, offset_low, loff_t __user *, result,
+	unsigned long, origin)
 {
 	return sys_llseek(fd, offset_high, offset_low, result, origin);
 }
@@ -144,20 +145,20 @@
    lseek back to original location.  They fail just like lseek does on
    non-seekable files.  */
 
-asmlinkage ssize_t sys32_pread(unsigned int fd, char __user * buf,
-			       size_t count, u32 unused, u64 a4, u64 a5)
+SYSCALL_DEFINE6(32_pread, unsigned long, fd, char __user *, buf, size_t, count,
+	unsigned long, unused, unsigned long, a4, unsigned long, a5)
 {
 	return sys_pread64(fd, buf, count, merge_64(a4, a5));
 }
 
-asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char __user * buf,
-			        size_t count, u32 unused, u64 a4, u64 a5)
+SYSCALL_DEFINE6(32_pwrite, unsigned int, fd, const char __user *, buf,
+	size_t, count, u32, unused, u64, a4, u64, a5)
 {
 	return sys_pwrite64(fd, buf, count, merge_64(a4, a5));
 }
 
-asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid,
-	struct compat_timespec __user *interval)
+SYSCALL_DEFINE2(32_sched_rr_get_interval, compat_pid_t, pid,
+	struct compat_timespec __user *, interval)
 {
 	struct timespec t;
 	int ret;
@@ -174,8 +175,8 @@
 
 #ifdef CONFIG_SYSVIPC
 
-asmlinkage long
-sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
+SYSCALL_DEFINE6(32_ipc, u32, call, long, first, long, second, long, third,
+	unsigned long, ptr, unsigned long, fifth)
 {
 	int version, err;
 
@@ -233,8 +234,8 @@
 
 #else
 
-asmlinkage long
-sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
+SYSCALL_DEFINE6(32_ipc, u32, call, int, first, int, second, int, third,
+	u32, ptr, u32, fifth)
 {
 	return -ENOSYS;
 }
@@ -242,7 +243,7 @@
 #endif /* CONFIG_SYSVIPC */
 
 #ifdef CONFIG_MIPS32_N32
-asmlinkage long sysn32_semctl(int semid, int semnum, int cmd, u32 arg)
+SYSCALL_DEFINE4(n32_semctl, int, semid, int, semnum, int, cmd, u32, arg)
 {
 	/* compat_sys_semctl expects a pointer to union semun */
 	u32 __user *uptr = compat_alloc_user_space(sizeof(u32));
@@ -251,13 +252,14 @@
 	return compat_sys_semctl(semid, semnum, cmd, uptr);
 }
 
-asmlinkage long sysn32_msgsnd(int msqid, u32 msgp, unsigned msgsz, int msgflg)
+SYSCALL_DEFINE4(n32_msgsnd, int, msqid, u32, msgp, unsigned int, msgsz,
+	int, msgflg)
 {
 	return compat_sys_msgsnd(msqid, msgsz, msgflg, compat_ptr(msgp));
 }
 
-asmlinkage long sysn32_msgrcv(int msqid, u32 msgp, size_t msgsz, int msgtyp,
-			      int msgflg)
+SYSCALL_DEFINE5(n32_msgrcv, int, msqid, u32, msgp, size_t, msgsz,
+	int, msgtyp, int, msgflg)
 {
 	return compat_sys_msgrcv(msqid, msgsz, msgtyp, msgflg, IPC_64,
 				 compat_ptr(msgp));
@@ -277,7 +279,7 @@
 
 #ifdef CONFIG_SYSCTL_SYSCALL
 
-asmlinkage long sys32_sysctl(struct sysctl_args32 __user *args)
+SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args)
 {
 	struct sysctl_args32 tmp;
 	int error;
@@ -316,9 +318,16 @@
 	return error;
 }
 
+#else
+
+SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args)
+{
+	return -ENOSYS;
+}
+
 #endif /* CONFIG_SYSCTL_SYSCALL */
 
-asmlinkage long sys32_newuname(struct new_utsname __user * name)
+SYSCALL_DEFINE1(32_newuname, struct new_utsname __user *, name)
 {
 	int ret = 0;
 
@@ -334,7 +343,7 @@
 	return ret;
 }
 
-asmlinkage int sys32_personality(unsigned long personality)
+SYSCALL_DEFINE1(32_personality, unsigned long, personality)
 {
 	int ret;
 	personality &= 0xffffffff;
@@ -357,7 +366,7 @@
 
 extern asmlinkage long sys_ustat(dev_t dev, struct ustat __user * ubuf);
 
-asmlinkage int sys32_ustat(dev_t dev, struct ustat32 __user * ubuf32)
+SYSCALL_DEFINE2(32_ustat, dev_t, dev, struct ustat32 __user *, ubuf32)
 {
 	int err;
 	struct ustat tmp;
@@ -381,8 +390,8 @@
 	return err;
 }
 
-asmlinkage int sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset,
-	s32 count)
+SYSCALL_DEFINE4(32_sendfile, long, out_fd, long, in_fd,
+	compat_off_t __user *, offset, s32, count)
 {
 	mm_segment_t old_fs = get_fs();
 	int ret;
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 51d1ba4..9ab70c3 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -399,7 +399,7 @@
 	sys	sys_swapon		2
 	sys	sys_reboot		3
 	sys	sys_old_readdir		3
-	sys	old_mmap		6	/* 4090 */
+	sys	sys_mips_mmap		6	/* 4090 */
 	sys	sys_munmap		2
 	sys	sys_truncate		2
 	sys	sys_ftruncate		2
@@ -519,7 +519,7 @@
 	sys	sys_sendfile		4
 	sys	sys_ni_syscall		0
 	sys	sys_ni_syscall		0
-	sys	sys_mmap2		6	/* 4210 */
+	sys	sys_mips_mmap2		6	/* 4210 */
 	sys	sys_truncate64		4
 	sys	sys_ftruncate64		4
 	sys	sys_stat64		2
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index a9e1716..9b46986 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -207,7 +207,7 @@
 	PTR	sys_newlstat
 	PTR	sys_poll
 	PTR	sys_lseek
-	PTR	old_mmap
+	PTR	sys_mips_mmap
 	PTR	sys_mprotect			/* 5010 */
 	PTR	sys_munmap
 	PTR	sys_brk
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 30f3b63..7438e92 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -129,12 +129,12 @@
 	PTR	sys_newlstat
 	PTR	sys_poll
 	PTR	sys_lseek
-	PTR	old_mmap
+	PTR	sys_mips_mmap
 	PTR	sys_mprotect			/* 6010 */
 	PTR	sys_munmap
 	PTR	sys_brk
-	PTR	sys32_rt_sigaction
-	PTR	sys32_rt_sigprocmask
+	PTR	sys_32_rt_sigaction
+	PTR	sys_32_rt_sigprocmask
 	PTR	compat_sys_ioctl		/* 6015 */
 	PTR	sys_pread64
 	PTR	sys_pwrite64
@@ -159,7 +159,7 @@
 	PTR	compat_sys_setitimer
 	PTR	sys_alarm
 	PTR	sys_getpid
-	PTR	sys32_sendfile
+	PTR	sys_32_sendfile
 	PTR	sys_socket			/* 6040 */
 	PTR	sys_connect
 	PTR	sys_accept
@@ -181,14 +181,14 @@
 	PTR	sys_exit
 	PTR	compat_sys_wait4
 	PTR	sys_kill			/* 6060 */
-	PTR	sys32_newuname
+	PTR	sys_32_newuname
 	PTR	sys_semget
 	PTR	sys_semop
-	PTR	sysn32_semctl
+	PTR	sys_n32_semctl
 	PTR	sys_shmdt			/* 6065 */
 	PTR	sys_msgget
-	PTR	sysn32_msgsnd
-	PTR	sysn32_msgrcv
+	PTR	sys_n32_msgsnd
+	PTR	sys_n32_msgrcv
 	PTR	compat_sys_msgctl
 	PTR	compat_sys_fcntl		/* 6070 */
 	PTR	sys_flock
@@ -245,15 +245,15 @@
 	PTR	sys_getsid
 	PTR	sys_capget
 	PTR	sys_capset
-	PTR	sys32_rt_sigpending		/* 6125 */
+	PTR	sys_32_rt_sigpending		/* 6125 */
 	PTR	compat_sys_rt_sigtimedwait
-	PTR	sys32_rt_sigqueueinfo
+	PTR	sys_32_rt_sigqueueinfo
 	PTR	sysn32_rt_sigsuspend
 	PTR	sys32_sigaltstack
 	PTR	compat_sys_utime		/* 6130 */
 	PTR	sys_mknod
-	PTR	sys32_personality
-	PTR	sys32_ustat
+	PTR	sys_32_personality
+	PTR	sys_32_ustat
 	PTR	compat_sys_statfs
 	PTR	compat_sys_fstatfs		/* 6135 */
 	PTR	sys_sysfs
@@ -265,14 +265,14 @@
 	PTR	sys_sched_getscheduler
 	PTR	sys_sched_get_priority_max
 	PTR	sys_sched_get_priority_min
-	PTR	sys32_sched_rr_get_interval	/* 6145 */
+	PTR	sys_32_sched_rr_get_interval	/* 6145 */
 	PTR	sys_mlock
 	PTR	sys_munlock
 	PTR	sys_mlockall
 	PTR	sys_munlockall
 	PTR	sys_vhangup			/* 6150 */
 	PTR	sys_pivot_root
-	PTR	sys32_sysctl
+	PTR	sys_32_sysctl
 	PTR	sys_prctl
 	PTR	compat_sys_adjtimex
 	PTR	compat_sys_setrlimit		/* 6155 */
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index fefef4a..b0fef4f 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -265,12 +265,12 @@
 	PTR	sys_olduname
 	PTR	sys_umask			/* 4060 */
 	PTR	sys_chroot
-	PTR	sys32_ustat
+	PTR	sys_32_ustat
 	PTR	sys_dup2
 	PTR	sys_getppid
 	PTR	sys_getpgrp			/* 4065 */
 	PTR	sys_setsid
-	PTR	sys32_sigaction
+	PTR	sys_32_sigaction
 	PTR	sys_sgetmask
 	PTR	sys_ssetmask
 	PTR	sys_setreuid			/* 4070 */
@@ -293,7 +293,7 @@
 	PTR	sys_swapon
 	PTR	sys_reboot
 	PTR	compat_sys_old_readdir
-	PTR	old_mmap			/* 4090 */
+	PTR	sys_mips_mmap			/* 4090 */
 	PTR	sys_munmap
 	PTR	sys_truncate
 	PTR	sys_ftruncate
@@ -320,12 +320,12 @@
 	PTR	compat_sys_wait4
 	PTR	sys_swapoff			/* 4115 */
 	PTR	compat_sys_sysinfo
-	PTR	sys32_ipc
+	PTR	sys_32_ipc
 	PTR	sys_fsync
 	PTR	sys32_sigreturn
 	PTR	sys32_clone			/* 4120 */
 	PTR	sys_setdomainname
-	PTR	sys32_newuname
+	PTR	sys_32_newuname
 	PTR	sys_ni_syscall			/* sys_modify_ldt */
 	PTR	compat_sys_adjtimex
 	PTR	sys_mprotect			/* 4125 */
@@ -339,11 +339,11 @@
 	PTR	sys_fchdir
 	PTR	sys_bdflush
 	PTR	sys_sysfs			/* 4135 */
-	PTR	sys32_personality
+	PTR	sys_32_personality
 	PTR	sys_ni_syscall	 		/* for afs_syscall */
 	PTR	sys_setfsuid
 	PTR	sys_setfsgid
-	PTR	sys32_llseek			/* 4140 */
+	PTR	sys_32_llseek			/* 4140 */
 	PTR	compat_sys_getdents
 	PTR	compat_sys_select
 	PTR	sys_flock
@@ -356,7 +356,7 @@
 	PTR	sys_ni_syscall			/* 4150 */
 	PTR	sys_getsid
 	PTR	sys_fdatasync
-	PTR	sys32_sysctl
+	PTR	sys_32_sysctl
 	PTR	sys_mlock
 	PTR	sys_munlock			/* 4155 */
 	PTR	sys_mlockall
@@ -368,7 +368,7 @@
 	PTR	sys_sched_yield
 	PTR	sys_sched_get_priority_max
 	PTR	sys_sched_get_priority_min
-	PTR	sys32_sched_rr_get_interval 	/* 4165 */
+	PTR	sys_32_sched_rr_get_interval 	/* 4165 */
 	PTR	compat_sys_nanosleep
 	PTR	sys_mremap
 	PTR	sys_accept
@@ -397,25 +397,25 @@
 	PTR	sys_getresgid
 	PTR	sys_prctl
 	PTR	sys32_rt_sigreturn
-	PTR	sys32_rt_sigaction
-	PTR	sys32_rt_sigprocmask 		/* 4195 */
-	PTR	sys32_rt_sigpending
+	PTR	sys_32_rt_sigaction
+	PTR	sys_32_rt_sigprocmask 		/* 4195 */
+	PTR	sys_32_rt_sigpending
 	PTR	compat_sys_rt_sigtimedwait
-	PTR	sys32_rt_sigqueueinfo
+	PTR	sys_32_rt_sigqueueinfo
 	PTR	sys32_rt_sigsuspend
-	PTR	sys32_pread			/* 4200 */
-	PTR	sys32_pwrite
+	PTR	sys_32_pread			/* 4200 */
+	PTR	sys_32_pwrite
 	PTR	sys_chown
 	PTR	sys_getcwd
 	PTR	sys_capget
 	PTR	sys_capset			/* 4205 */
 	PTR	sys32_sigaltstack
-	PTR	sys32_sendfile
+	PTR	sys_32_sendfile
 	PTR	sys_ni_syscall
 	PTR	sys_ni_syscall
-	PTR	sys32_mmap2			/* 4210 */
-	PTR	sys32_truncate64
-	PTR	sys32_ftruncate64
+	PTR	sys_mips_mmap2			/* 4210 */
+	PTR	sys_32_truncate64
+	PTR	sys_32_ftruncate64
 	PTR	sys_newstat
 	PTR	sys_newlstat
 	PTR	sys_newfstat			/* 4215 */
@@ -481,7 +481,7 @@
 	PTR	compat_sys_mq_notify		/* 4275 */
 	PTR	compat_sys_mq_getsetattr
 	PTR	sys_ni_syscall			/* sys_vserver */
-	PTR	sys32_waitid
+	PTR	sys_32_waitid
 	PTR	sys_ni_syscall			/* available, was setaltroot */
 	PTR	sys_add_key			/* 4280 */
 	PTR	sys_request_key
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index a4e106c..830c5ef 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -19,6 +19,7 @@
 #include <linux/ptrace.h>
 #include <linux/unistd.h>
 #include <linux/compiler.h>
+#include <linux/syscalls.h>
 #include <linux/uaccess.h>
 
 #include <asm/abi.h>
@@ -338,8 +339,8 @@
 }
 
 #ifdef CONFIG_TRAD_SIGNALS
-asmlinkage int sys_sigaction(int sig, const struct sigaction __user *act,
-	struct sigaction __user *oact)
+SYSCALL_DEFINE3(sigaction, int, sig, const struct sigaction __user *, act,
+	struct sigaction __user *, oact)
 {
 	struct k_sigaction new_ka, old_ka;
 	int ret;
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index 652709b..2e74075 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -349,8 +349,8 @@
 	return -ERESTARTNOHAND;
 }
 
-asmlinkage int sys32_sigaction(int sig, const struct sigaction32 __user *act,
-                               struct sigaction32 __user *oact)
+SYSCALL_DEFINE3(32_sigaction, long, sig, const struct sigaction32 __user *, act,
+	struct sigaction32 __user *, oact)
 {
 	struct k_sigaction new_ka, old_ka;
 	int ret;
@@ -704,9 +704,9 @@
 	.restart	= __NR_O32_restart_syscall
 };
 
-asmlinkage int sys32_rt_sigaction(int sig, const struct sigaction32 __user *act,
-				  struct sigaction32 __user *oact,
-				  unsigned int sigsetsize)
+SYSCALL_DEFINE4(32_rt_sigaction, int, sig,
+	const struct sigaction32 __user *, act,
+	struct sigaction32 __user *, oact, unsigned int, sigsetsize)
 {
 	struct k_sigaction new_sa, old_sa;
 	int ret = -EINVAL;
@@ -748,8 +748,8 @@
 	return ret;
 }
 
-asmlinkage int sys32_rt_sigprocmask(int how, compat_sigset_t __user *set,
-	compat_sigset_t __user *oset, unsigned int sigsetsize)
+SYSCALL_DEFINE4(32_rt_sigprocmask, int, how, compat_sigset_t __user *, set,
+	compat_sigset_t __user *, oset, unsigned int, sigsetsize)
 {
 	sigset_t old_set, new_set;
 	int ret;
@@ -770,8 +770,8 @@
 	return ret;
 }
 
-asmlinkage int sys32_rt_sigpending(compat_sigset_t __user *uset,
-	unsigned int sigsetsize)
+SYSCALL_DEFINE2(32_rt_sigpending, compat_sigset_t __user *, uset,
+	unsigned int, sigsetsize)
 {
 	int ret;
 	sigset_t set;
@@ -787,7 +787,8 @@
 	return ret;
 }
 
-asmlinkage int sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *uinfo)
+SYSCALL_DEFINE3(32_rt_sigqueueinfo, int, pid, int, sig,
+	compat_siginfo_t __user *, uinfo)
 {
 	siginfo_t info;
 	int ret;
@@ -802,10 +803,9 @@
 	return ret;
 }
 
-asmlinkage long
-sys32_waitid(int which, compat_pid_t pid,
-	     compat_siginfo_t __user *uinfo, int options,
-	     struct compat_rusage __user *uru)
+SYSCALL_DEFINE5(32_waitid, int, which, compat_pid_t, pid,
+	     compat_siginfo_t __user *, uinfo, int, options,
+	     struct compat_rusage __user *, uru)
 {
 	siginfo_t info;
 	struct rusage ru;
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 37970d9..8cf3846 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -152,9 +152,9 @@
 	return error;
 }
 
-asmlinkage unsigned long
-old_mmap(unsigned long addr, unsigned long len, int prot,
-	int flags, int fd, off_t offset)
+SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len,
+	unsigned long, prot, unsigned long, flags, unsigned long,
+	fd, off_t, offset)
 {
 	unsigned long result;
 
@@ -168,9 +168,9 @@
 	return result;
 }
 
-asmlinkage unsigned long
-sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
-          unsigned long flags, unsigned long fd, unsigned long pgoff)
+SYSCALL_DEFINE6(mips_mmap2, unsigned long, addr, unsigned long, len,
+	unsigned long, prot, unsigned long, flags, unsigned long, fd,
+	unsigned long, pgoff)
 {
 	if (pgoff & (~PAGE_MASK >> 12))
 		return -EINVAL;
@@ -240,7 +240,7 @@
 /*
  * Compacrapability ...
  */
-asmlinkage int sys_uname(struct old_utsname __user * name)
+SYSCALL_DEFINE1(uname, struct old_utsname __user *, name)
 {
 	if (name && !copy_to_user(name, utsname(), sizeof (*name)))
 		return 0;
@@ -250,7 +250,7 @@
 /*
  * Compacrapability ...
  */
-asmlinkage int sys_olduname(struct oldold_utsname __user * name)
+SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name)
 {
 	int error;
 
@@ -279,7 +279,7 @@
 	return error;
 }
 
-asmlinkage int sys_set_thread_area(unsigned long addr)
+SYSCALL_DEFINE1(set_thread_area, unsigned long, addr)
 {
 	struct thread_info *ti = task_thread_info(current);
 
@@ -290,7 +290,7 @@
 	return 0;
 }
 
-asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
+asmlinkage int _sys_sysmips(long cmd, long arg1, long arg2, long arg3)
 {
 	switch (cmd) {
 	case MIPS_ATOMIC_SET:
@@ -325,8 +325,8 @@
  *
  * This is really horribly ugly.
  */
-asmlinkage int sys_ipc(unsigned int call, int first, int second,
-		       unsigned long third, void __user *ptr, long fifth)
+SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, int, second,
+	unsigned long, third, void __user *, ptr, long, fifth)
 {
 	int version, ret;
 
@@ -411,7 +411,7 @@
 /*
  * No implemented yet ...
  */
-asmlinkage int sys_cachectl(char *addr, int nbytes, int op)
+SYSCALL_DEFINE3(cachectl, char *, addr, int, nbytes, int, op)
 {
 	return -ENOSYS;
 }
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 98ad0a8..694d51f 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -13,6 +13,7 @@
 #include <linux/linkage.h>
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/syscalls.h>
 #include <linux/mm.h>
 
 #include <asm/cacheflush.h>
@@ -58,8 +59,8 @@
  * We could optimize the case where the cache argument is not BCACHE but
  * that seems very atypical use ...
  */
-asmlinkage int sys_cacheflush(unsigned long addr,
-	unsigned long bytes, unsigned int cache)
+SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, bytes,
+	unsigned int, cache)
 {
 	if (bytes == 0)
 		return 0;
diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c
index 1417c64..48060c6 100644
--- a/arch/mips/mm/page.c
+++ b/arch/mips/mm/page.c
@@ -172,8 +172,9 @@
 		 */
 		cache_line_size = cpu_dcache_line_size();
 		switch (current_cpu_type()) {
+		case CPU_R5500:
 		case CPU_TX49XX:
-			/* TX49 supports only Pref_Load */
+			/* These processors only support the Pref_Load. */
 			pref_bias_copy_load = 256;
 			break;
 
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 4294203..f335cf6 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -318,6 +318,7 @@
 	case CPU_BCM4710:
 	case CPU_LOONGSON2:
 	case CPU_CAVIUM_OCTEON:
+	case CPU_R5500:
 		if (m4kc_tlbp_war())
 			uasm_i_nop(p);
 		tlbw(p);
diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig
index b688838..f5698f9 100644
--- a/arch/powerpc/configs/40x/virtex_defconfig
+++ b/arch/powerpc/configs/40x/virtex_defconfig
@@ -686,7 +686,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig
index 15aab1c..1bf0a63 100644
--- a/arch/powerpc/configs/44x/virtex5_defconfig
+++ b/arch/powerpc/configs/44x/virtex5_defconfig
@@ -691,7 +691,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index aa5855a..15900dc 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:29 2009
+# Linux kernel version: 2.6.29-rc6
+# Fri Mar  6 00:07:38 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -71,6 +71,15 @@
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -88,6 +97,7 @@
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -153,11 +163,6 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -294,7 +299,6 @@
 #
 # Networking options
 #
-# CONFIG_NET_NS is not set
 CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
@@ -508,8 +512,8 @@
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
 
 #
@@ -587,7 +591,6 @@
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -617,13 +620,19 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=m
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -839,6 +848,7 @@
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -1037,8 +1047,6 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index 86512c8..9490346 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:46 2009
+# Linux kernel version: 2.6.29-rc6
+# Fri Mar  6 00:09:08 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -71,6 +71,15 @@
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -144,11 +153,6 @@
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -377,8 +381,8 @@
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
 
 #
@@ -452,7 +456,6 @@
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -478,13 +481,19 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -677,6 +686,7 @@
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -818,8 +828,6 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -1159,6 +1167,7 @@
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_EXPORTFS=m
 
 #
 # Partition Types
diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h
index d811a8c..4774c2f 100644
--- a/arch/powerpc/include/asm/compat.h
+++ b/arch/powerpc/include/asm/compat.h
@@ -210,5 +210,10 @@
 	compat_ulong_t __unused6;
 };
 
+static inline int is_compat_task(void)
+{
+	return test_thread_flag(TIF_32BIT);
+}
+
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_COMPAT_H */
diff --git a/arch/powerpc/include/asm/seccomp.h b/arch/powerpc/include/asm/seccomp.h
index 853765e..00c1d91 100644
--- a/arch/powerpc/include/asm/seccomp.h
+++ b/arch/powerpc/include/asm/seccomp.h
@@ -1,10 +1,6 @@
 #ifndef _ASM_POWERPC_SECCOMP_H
 #define _ASM_POWERPC_SECCOMP_H
 
-#ifdef __KERNEL__
-#include <linux/thread_info.h>
-#endif
-
 #include <linux/unistd.h>
 
 #define __NR_seccomp_read __NR_read
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index ada0692..73cb6a3 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -367,27 +367,24 @@
 static int emulate_fp_pair(unsigned char __user *addr, unsigned int reg,
 			   unsigned int flags)
 {
-	char *ptr = (char *) &current->thread.TS_FPR(reg);
-	int i, ret;
+	char *ptr0 = (char *) &current->thread.TS_FPR(reg);
+	char *ptr1 = (char *) &current->thread.TS_FPR(reg+1);
+	int i, ret, sw = 0;
 
 	if (!(flags & F))
 		return 0;
 	if (reg & 1)
 		return 0;	/* invalid form: FRS/FRT must be even */
-	if (!(flags & SW)) {
-		/* not byte-swapped - easy */
-		if (!(flags & ST))
-			ret = __copy_from_user(ptr, addr, 16);
-		else
-			ret = __copy_to_user(addr, ptr, 16);
-	} else {
-		/* each FPR value is byte-swapped separately */
-		ret = 0;
-		for (i = 0; i < 16; ++i) {
-			if (!(flags & ST))
-				ret |= __get_user(ptr[i^7], addr + i);
-			else
-				ret |= __put_user(ptr[i^7], addr + i);
+	if (flags & SW)
+		sw = 7;
+	ret = 0;
+	for (i = 0; i < 8; ++i) {
+		if (!(flags & ST)) {
+			ret |= __get_user(ptr0[i^sw], addr + i);
+			ret |= __get_user(ptr1[i^sw], addr + i + 8);
+		} else {
+			ret |= __put_user(ptr0[i^sw], addr + i);
+			ret |= __put_user(ptr1[i^sw], addr + i + 8);
 		}
 	}
 	if (ret)
diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S
index 70693a5..693b14a 100644
--- a/arch/powerpc/lib/copyuser_64.S
+++ b/arch/powerpc/lib/copyuser_64.S
@@ -62,18 +62,19 @@
 72:	std	r8,8(r3)
 	beq+	3f
 	addi	r3,r3,16
-23:	ld	r9,8(r4)
 .Ldo_tail:
 	bf	cr7*4+1,1f
-	rotldi	r9,r9,32
+23:	lwz	r9,8(r4)
+	addi	r4,r4,4
 73:	stw	r9,0(r3)
 	addi	r3,r3,4
 1:	bf	cr7*4+2,2f
-	rotldi	r9,r9,16
+44:	lhz	r9,8(r4)
+	addi	r4,r4,2
 74:	sth	r9,0(r3)
 	addi	r3,r3,2
 2:	bf	cr7*4+3,3f
-	rotldi	r9,r9,8
+45:	lbz	r9,8(r4)
 75:	stb	r9,0(r3)
 3:	li	r3,0
 	blr
@@ -141,11 +142,24 @@
 6:	cmpwi	cr1,r5,8
 	addi	r3,r3,32
 	sld	r9,r9,r10
-	ble	cr1,.Ldo_tail
+	ble	cr1,7f
 34:	ld	r0,8(r4)
 	srd	r7,r0,r11
 	or	r9,r7,r9
-	b	.Ldo_tail
+7:
+	bf	cr7*4+1,1f
+	rotldi	r9,r9,32
+94:	stw	r9,0(r3)
+	addi	r3,r3,4
+1:	bf	cr7*4+2,2f
+	rotldi	r9,r9,16
+95:	sth	r9,0(r3)
+	addi	r3,r3,2
+2:	bf	cr7*4+3,3f
+	rotldi	r9,r9,8
+96:	stb	r9,0(r3)
+3:	li	r3,0
+	blr
 
 .Ldst_unaligned:
 	PPC_MTOCRF	0x01,r6		/* put #bytes to 8B bdry into cr7 */
@@ -218,7 +232,6 @@
 121:
 132:
 	addi	r3,r3,8
-123:
 134:
 135:
 138:
@@ -226,6 +239,9 @@
 140:
 141:
 142:
+123:
+144:
+145:
 
 /*
  * here we have had a fault on a load and r3 points to the first
@@ -309,6 +325,9 @@
 187:
 188:
 189:	
+194:
+195:
+196:
 1:
 	ld	r6,-24(r1)
 	ld	r5,-8(r1)
@@ -329,7 +348,9 @@
 	.llong	72b,172b
 	.llong	23b,123b
 	.llong	73b,173b
+	.llong	44b,144b
 	.llong	74b,174b
+	.llong	45b,145b
 	.llong	75b,175b
 	.llong	24b,124b
 	.llong	25b,125b
@@ -347,6 +368,9 @@
 	.llong	79b,179b
 	.llong	80b,180b
 	.llong	34b,134b
+	.llong	94b,194b
+	.llong	95b,195b
+	.llong	96b,196b
 	.llong	35b,135b
 	.llong	81b,181b
 	.llong	36b,136b
diff --git a/arch/powerpc/lib/memcpy_64.S b/arch/powerpc/lib/memcpy_64.S
index fe2d34e..e178922 100644
--- a/arch/powerpc/lib/memcpy_64.S
+++ b/arch/powerpc/lib/memcpy_64.S
@@ -53,18 +53,19 @@
 3:	std	r8,8(r3)
 	beq	3f
 	addi	r3,r3,16
-	ld	r9,8(r4)
 .Ldo_tail:
 	bf	cr7*4+1,1f
-	rotldi	r9,r9,32
+	lwz	r9,8(r4)
+	addi	r4,r4,4
 	stw	r9,0(r3)
 	addi	r3,r3,4
 1:	bf	cr7*4+2,2f
-	rotldi	r9,r9,16
+	lhz	r9,8(r4)
+	addi	r4,r4,2
 	sth	r9,0(r3)
 	addi	r3,r3,2
 2:	bf	cr7*4+3,3f
-	rotldi	r9,r9,8
+	lbz	r9,8(r4)
 	stb	r9,0(r3)
 3:	ld	r3,48(r1)	/* return dest pointer */
 	blr
@@ -133,11 +134,24 @@
 	cmpwi	cr1,r5,8
 	addi	r3,r3,32
 	sld	r9,r9,r10
-	ble	cr1,.Ldo_tail
+	ble	cr1,6f
 	ld	r0,8(r4)
 	srd	r7,r0,r11
 	or	r9,r7,r9
-	b	.Ldo_tail
+6:
+	bf	cr7*4+1,1f
+	rotldi	r9,r9,32
+	stw	r9,0(r3)
+	addi	r3,r3,4
+1:	bf	cr7*4+2,2f
+	rotldi	r9,r9,16
+	sth	r9,0(r3)
+	addi	r3,r3,2
+2:	bf	cr7*4+3,3f
+	rotldi	r9,r9,8
+	stb	r9,0(r3)
+3:	ld	r3,48(r1)	/* return dest pointer */
+	blr
 
 .Ldst_unaligned:
 	PPC_MTOCRF	0x01,r6		# put #bytes to 8B bdry into cr7
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
index fb371f5..d6b772b 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc610.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -142,6 +142,10 @@
 {
 	unsigned int val;
 
+	/* Do not do the fixup on other platforms! */
+	if (!machine_is(gef_sbc610))
+		return;
+
 	printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
 
 	/* Ensure ports 1, 2, 3, 4 & 5 are enabled */
diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
index 2ca7be6..244f997 100644
--- a/arch/powerpc/platforms/embedded6xx/linkstation.c
+++ b/arch/powerpc/platforms/embedded6xx/linkstation.c
@@ -12,7 +12,6 @@
 
 #include <linux/kernel.h>
 #include <linux/initrd.h>
-#include <linux/mtd/physmap.h>
 #include <linux/of_platform.h>
 
 #include <asm/time.h>
@@ -22,39 +21,6 @@
 
 #include "mpc10x.h"
 
-static struct mtd_partition linkstation_physmap_partitions[] = {
-	{
-		.name   = "mtd_firmimg",
-		.offset = 0x000000,
-		.size   = 0x300000,
-	},
-	{
-		.name   = "mtd_bootcode",
-		.offset = 0x300000,
-		.size   = 0x070000,
-	},
-	{
-		.name   = "mtd_status",
-		.offset = 0x370000,
-		.size   = 0x010000,
-	},
-	{
-		.name   = "mtd_conf",
-		.offset = 0x380000,
-		.size   = 0x080000,
-	},
-	{
-		.name   = "mtd_allflash",
-		.offset = 0x000000,
-		.size   = 0x400000,
-	},
-	{
-		.name   = "mtd_data",
-		.offset = 0x310000,
-		.size   = 0x0f0000,
-	},
-};
-
 static __initdata struct of_device_id of_bus_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "simple-bus", },
@@ -99,10 +65,6 @@
 static void __init linkstation_setup_arch(void)
 {
 	struct device_node *np;
-#ifdef CONFIG_MTD_PHYSMAP
-	physmap_set_partitions(linkstation_physmap_partitions,
-			       ARRAY_SIZE(linkstation_physmap_partitions));
-#endif
 
 	/* Lookup PCI host bridges */
 	for_each_compatible_node(np, "pci", "mpc10x-pci")
diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c
index 8864e48..613070e 100644
--- a/arch/powerpc/platforms/embedded6xx/storcenter.c
+++ b/arch/powerpc/platforms/embedded6xx/storcenter.c
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/initrd.h>
-#include <linux/mtd/physmap.h>
 #include <linux/of_platform.h>
 
 #include <asm/system.h>
@@ -26,32 +25,6 @@
 #include "mpc10x.h"
 
 
-#ifdef CONFIG_MTD_PHYSMAP
-static struct mtd_partition storcenter_physmap_partitions[] = {
-	{
-		.name   = "kernel",
-		.offset = 0x000000,
-		.size   = 0x170000,
-	},
-	{
-		.name   = "rootfs",
-		.offset = 0x170000,
-		.size   = 0x590000,
-	},
-	{
-		.name   = "uboot",
-		.offset = 0x700000,
-		.size   = 0x040000,
-	},
-	{
-		.name   = "config",
-		.offset = 0x740000,
-		.size   = 0x0c0000,
-	},
-};
-#endif
-
-
 static __initdata struct of_device_id storcenter_of_bus[] = {
 	{ .name = "soc", },
 	{},
@@ -96,11 +69,6 @@
 {
 	struct device_node *np;
 
-#ifdef CONFIG_MTD_PHYSMAP
-	physmap_set_partitions(storcenter_physmap_partitions,
-			       ARRAY_SIZE(storcenter_physmap_partitions));
-#endif
-
 	/* Lookup PCI host bridges */
 	for_each_compatible_node(np, "pci", "mpc10x-pci")
 		storcenter_add_bridge(np);
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 77fae5f..5558d93 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -204,6 +204,23 @@
 {
 	u32 ma, pcila, pciha;
 
+	/* Hack warning ! The "old" PCI 2.x cell only let us configure the low
+	 * 32-bit of incoming PLB addresses. The top 4 bits of the 36-bit
+	 * address are actually hard wired to a value that appears to depend
+	 * on the specific SoC. For example, it's 0 on 440EP and 1 on 440EPx.
+	 *
+	 * The trick here is we just crop those top bits and ignore them when
+	 * programming the chip. That means the device-tree has to be right
+	 * for the specific part used (we don't print a warning if it's wrong
+	 * but on the other hand, you'll crash quickly enough), but at least
+	 * this code should work whatever the hard coded value is
+	 */
+	plb_addr &= 0xffffffffull;
+
+	/* Note: Due to the above hack, the test below doesn't actually test
+	 * if you address is above 4G, but it tests that address and
+	 * (address + size) are both contained in the same 4G
+	 */
 	if ((plb_addr + size) > 0xffffffffull || !is_power_of_2(size) ||
 	    size < 0x1000 || (plb_addr & (size - 1)) != 0) {
 		printk(KERN_WARNING "%s: Resource out of range\n",
diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c
index c42cd89..6118890 100644
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -556,7 +556,7 @@
 module_init(aes_s390_init);
 module_exit(aes_s390_fini);
 
-MODULE_ALIAS("aes");
+MODULE_ALIAS("aes-all");
 
 MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm");
 MODULE_LICENSE("GPL");
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 7c35787..15b6d45 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -22,7 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_gpio.h>
-#include <media/ov772x.h>
+#include <media/soc_camera.h>
 #include <media/soc_camera_platform.h>
 #include <media/sh_mobile_ceu.h>
 #include <video/sh_mobile_lcdc.h>
@@ -224,7 +224,6 @@
 }
 
 #ifdef CONFIG_I2C
-/* support for the old ncm03j camera */
 static unsigned char camera_ncm03j_magic[] =
 {
 	0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
@@ -245,23 +244,6 @@
 	0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
 };
 
-static int camera_probe(void)
-{
-	struct i2c_adapter *a = i2c_get_adapter(0);
-	struct i2c_msg msg;
-	int ret;
-
-	camera_power(1);
-	msg.addr = 0x6e;
-	msg.buf = camera_ncm03j_magic;
-	msg.len = 2;
-	msg.flags = 0;
-	ret = i2c_transfer(a, &msg, 1);
-	camera_power(0);
-
-	return ret;
-}
-
 static int camera_set_capture(struct soc_camera_platform_info *info,
 			      int enable)
 {
@@ -313,35 +295,8 @@
 		.platform_data	= &camera_info,
 	},
 };
-
-static int __init camera_setup(void)
-{
-	if (camera_probe() > 0)
-		platform_device_register(&camera_device);
-
-	return 0;
-}
-late_initcall(camera_setup);
-
 #endif /* CONFIG_I2C */
 
-static int ov7725_power(struct device *dev, int mode)
-{
-	camera_power(0);
-	if (mode)
-		camera_power(1);
-
-	return 0;
-}
-
-static struct ov772x_camera_info ov7725_info = {
-	.buswidth  = SOCAM_DATAWIDTH_8,
-	.flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
-	.link = {
-		.power  = ov7725_power,
-	},
-};
-
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
 	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
@@ -392,6 +347,9 @@
 	&ap325rxa_nor_flash_device,
 	&lcdc_device,
 	&ceu_device,
+#ifdef CONFIG_I2C
+	&camera_device,
+#endif
 	&nand_flash_device,
 	&sdcard_cn3_device,
 };
@@ -400,10 +358,6 @@
 	{
 		I2C_BOARD_INFO("pcf8563", 0x51),
 	},
-	{
-		I2C_BOARD_INFO("ov772x", 0x21),
-		.platform_data = &ov7725_info,
-	},
 };
 
 static struct spi_board_info ap325rxa_spi_devices[] = {
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
index 020a96f..4a5e597 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
@@ -18,8 +18,8 @@
 #include <asm/freq.h>
 #include <asm/io.h>
 
-const static int pll1rate[]={1,2,3,4,6,8};
-const static int pfc_divisors[]={1,2,3,4,6,8,12};
+static const int pll1rate[]={1,2,3,4,6,8};
+static const int pfc_divisors[]={1,2,3,4,6,8,12};
 #define ifc_divisors pfc_divisors
 
 #if (CONFIG_SH_CLK_MD == 0)
diff --git a/arch/sparc/include/asm/compat.h b/arch/sparc/include/asm/compat.h
index f260b58..0e70625 100644
--- a/arch/sparc/include/asm/compat.h
+++ b/arch/sparc/include/asm/compat.h
@@ -240,4 +240,9 @@
 	unsigned int	__unused2;
 };
 
+static inline int is_compat_task(void)
+{
+	return test_thread_flag(TIF_32BIT);
+}
+
 #endif /* _ASM_SPARC64_COMPAT_H */
diff --git a/arch/sparc/include/asm/seccomp.h b/arch/sparc/include/asm/seccomp.h
index 7fcd996..adca1bc 100644
--- a/arch/sparc/include/asm/seccomp.h
+++ b/arch/sparc/include/asm/seccomp.h
@@ -1,11 +1,5 @@
 #ifndef _ASM_SECCOMP_H
 
-#include <linux/thread_info.h> /* already defines TIF_32BIT */
-
-#ifndef TIF_32BIT
-#error "unexpected TIF_32BIT on sparc64"
-#endif
-
 #include <linux/unistd.h>
 
 #define __NR_seccomp_read __NR_read
diff --git a/arch/sparc/kernel/chmc.c b/arch/sparc/kernel/chmc.c
index 3b9f4d6..e1a9598 100644
--- a/arch/sparc/kernel/chmc.c
+++ b/arch/sparc/kernel/chmc.c
@@ -306,6 +306,7 @@
 		buf[1] = '?';
 		buf[2] = '?';
 		buf[3] = '\0';
+		return 0;
 	}
 	p = dp->controller;
 	prop = &p->layout;
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index e289376..1c378d8 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -323,17 +323,25 @@
 	sun4u_irq_enable(virt_irq);
 }
 
+/* Don't do anything.  The desc->status check for IRQ_DISABLED in
+ * handler_irq() will skip the handler call and that will leave the
+ * interrupt in the sent state.  The next ->enable() call will hit the
+ * ICLR register to reset the state machine.
+ *
+ * This scheme is necessary, instead of clearing the Valid bit in the
+ * IMAP register, to handle the case of IMAP registers being shared by
+ * multiple INOs (and thus ICLR registers).  Since we use a different
+ * virtual IRQ for each shared IMAP instance, the generic code thinks
+ * there is only one user so it prematurely calls ->disable() on
+ * free_irq().
+ *
+ * We have to provide an explicit ->disable() method instead of using
+ * NULL to get the default.  The reason is that if the generic code
+ * sees that, it also hooks up a default ->shutdown method which
+ * invokes ->mask() which we do not want.  See irq_chip_set_defaults().
+ */
 static void sun4u_irq_disable(unsigned int virt_irq)
 {
-	struct irq_handler_data *data = get_irq_chip_data(virt_irq);
-
-	if (likely(data)) {
-		unsigned long imap = data->imap;
-		unsigned long tmp = upa_readq(imap);
-
-		tmp &= ~IMAP_VALID;
-		upa_writeq(tmp, imap);
-	}
 }
 
 static void sun4u_irq_eoi(unsigned int virt_irq)
@@ -746,7 +754,8 @@
 
 		desc = irq_desc + virt_irq;
 
-		desc->handle_irq(virt_irq, desc);
+		if (!(desc->status & IRQ_DISABLED))
+			desc->handle_irq(virt_irq, desc);
 
 		bucket_pa = next_pa;
 	}
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 15e8b7c..8e3d69e 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -64,6 +64,11 @@
 		ret = poke_user(child, addr, data);
 		break;
 
+	case PTRACE_SYSEMU:
+	case PTRACE_SYSEMU_SINGLESTEP:
+		ret = -EIO;
+		break;
+
 	/* continue and stop at next (return from) syscall */
 	case PTRACE_SYSCALL:
 	/* restart after signal. */
diff --git a/arch/um/os-Linux/user_syms.c b/arch/um/os-Linux/user_syms.c
index 74f49bb..89b48a1 100644
--- a/arch/um/os-Linux/user_syms.c
+++ b/arch/um/os-Linux/user_syms.c
@@ -14,7 +14,6 @@
 #undef memset
 
 extern size_t strlen(const char *);
-extern void *memcpy(void *, const void *, size_t);
 extern void *memmove(void *, const void *, size_t);
 extern void *memset(void *, int, size_t);
 extern int printf(const char *, ...);
@@ -24,7 +23,11 @@
 EXPORT_SYMBOL(strstr);
 #endif
 
+#ifndef __x86_64__
+extern void *memcpy(void *, const void *, size_t);
 EXPORT_SYMBOL(memcpy);
+#endif
+
 EXPORT_SYMBOL(memmove);
 EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(printf);
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 9c39095..bc2fbad 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1803,7 +1803,7 @@
 	  remapping devices.
 
 config DMAR_DEFAULT_ON
-	def_bool n
+	def_bool y
 	prompt "Enable DMA Remapping Devices by default"
 	depends on DMAR
 	help
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index ca5ffb2..edc90f2 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -37,8 +37,6 @@
 
 #else /* !CONFIG_X86_32 */
 
-#define MAX_EFI_IO_PAGES	100
-
 extern u64 efi_call0(void *fp);
 extern u64 efi_call1(void *fp, u64 arg1);
 extern u64 efi_call2(void *fp, u64 arg1, u64 arg2);
diff --git a/arch/x86/include/asm/fixmap_64.h b/arch/x86/include/asm/fixmap_64.h
index 00a30ab9..8be7409 100644
--- a/arch/x86/include/asm/fixmap_64.h
+++ b/arch/x86/include/asm/fixmap_64.h
@@ -16,7 +16,6 @@
 #include <asm/apicdef.h>
 #include <asm/page.h>
 #include <asm/vsyscall.h>
-#include <asm/efi.h>
 
 /*
  * Here we define all the compile-time 'special' virtual
@@ -43,9 +42,6 @@
 	FIX_APIC_BASE,	/* local (CPU) APIC) -- required for SMP or not */
 	FIX_IO_APIC_BASE_0,
 	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
-	FIX_EFI_IO_MAP_LAST_PAGE,
-	FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE
-				  + MAX_EFI_IO_PAGES - 1,
 #ifdef CONFIG_PARAVIRT
 	FIX_PARAVIRT_BOOTMAP,
 #endif
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index 48f0004..71c9e51 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -172,7 +172,13 @@
 
 #else  /* CONFIG_X86_32 */
 
-extern void finit(void);
+#ifdef CONFIG_MATH_EMULATION
+extern void finit_task(struct task_struct *tsk);
+#else
+static inline void finit_task(struct task_struct *tsk)
+{
+}
+#endif
 
 static inline void tolerant_fwait(void)
 {
diff --git a/arch/x86/include/asm/iomap.h b/arch/x86/include/asm/iomap.h
index c1f0628..86af260 100644
--- a/arch/x86/include/asm/iomap.h
+++ b/arch/x86/include/asm/iomap.h
@@ -23,6 +23,9 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 
+int
+is_io_mapping_possible(resource_size_t base, unsigned long size);
+
 void *
 iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot);
 
diff --git a/arch/x86/include/asm/seccomp_32.h b/arch/x86/include/asm/seccomp_32.h
index a6ad87b..b811d6f 100644
--- a/arch/x86/include/asm/seccomp_32.h
+++ b/arch/x86/include/asm/seccomp_32.h
@@ -1,12 +1,6 @@
 #ifndef _ASM_X86_SECCOMP_32_H
 #define _ASM_X86_SECCOMP_32_H
 
-#include <linux/thread_info.h>
-
-#ifdef TIF_32BIT
-#error "unexpected TIF_32BIT on i386"
-#endif
-
 #include <linux/unistd.h>
 
 #define __NR_seccomp_read __NR_read
diff --git a/arch/x86/include/asm/seccomp_64.h b/arch/x86/include/asm/seccomp_64.h
index 4171bb7..84ec1bd 100644
--- a/arch/x86/include/asm/seccomp_64.h
+++ b/arch/x86/include/asm/seccomp_64.h
@@ -1,14 +1,6 @@
 #ifndef _ASM_X86_SECCOMP_64_H
 #define _ASM_X86_SECCOMP_64_H
 
-#include <linux/thread_info.h>
-
-#ifdef TIF_32BIT
-#error "unexpected TIF_32BIT on x86_64"
-#else
-#define TIF_32BIT TIF_IA32
-#endif
-
 #include <linux/unistd.h>
 #include <asm/ia32_unistd.h>
 
diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
index b585e04c..3178c3a 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
@@ -277,7 +277,6 @@
 	.name		= "p4-clockmod",
 	.owner		= THIS_MODULE,
 	.attr		= p4clockmod_attr,
-	.hide_interface	= 1,
 };
 
 
diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c
index 169a120..87b67e3 100644
--- a/arch/x86/kernel/ds.c
+++ b/arch/x86/kernel/ds.c
@@ -729,7 +729,7 @@
 
 	spin_unlock_irqrestore(&ds_lock, irq);
 
-	ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_bts);
+	ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_pebs);
 	ds_resume_pebs(tracer);
 
 	return tracer;
@@ -1029,5 +1029,4 @@
 
 void ds_exit_thread(struct task_struct *tsk)
 {
-	WARN_ON(tsk->thread.ds_ctx);
 }
diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c
index 1119d24..eb1ef3b 100644
--- a/arch/x86/kernel/efi.c
+++ b/arch/x86/kernel/efi.c
@@ -467,7 +467,7 @@
 	efi_memory_desc_t *md;
 	efi_status_t status;
 	unsigned long size;
-	u64 end, systab, addr, npages;
+	u64 end, systab, addr, npages, end_pfn;
 	void *p, *va;
 
 	efi.systab = NULL;
@@ -479,7 +479,10 @@
 		size = md->num_pages << EFI_PAGE_SHIFT;
 		end = md->phys_addr + size;
 
-		if (PFN_UP(end) <= max_low_pfn_mapped)
+		end_pfn = PFN_UP(end);
+		if (end_pfn <= max_low_pfn_mapped
+		    || (end_pfn > (1UL << (32 - PAGE_SHIFT))
+			&& end_pfn <= max_pfn_mapped))
 			va = __va(md->phys_addr);
 		else
 			va = efi_ioremap(md->phys_addr, size);
diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c
index 652c528..cb783b9 100644
--- a/arch/x86/kernel/efi_64.c
+++ b/arch/x86/kernel/efi_64.c
@@ -99,24 +99,11 @@
 
 void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size)
 {
-	static unsigned pages_mapped __initdata;
-	unsigned i, pages;
-	unsigned long offset;
+	unsigned long last_map_pfn;
 
-	pages = PFN_UP(phys_addr + size) - PFN_DOWN(phys_addr);
-	offset = phys_addr & ~PAGE_MASK;
-	phys_addr &= PAGE_MASK;
-
-	if (pages_mapped + pages > MAX_EFI_IO_PAGES)
+	last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size);
+	if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size)
 		return NULL;
 
-	for (i = 0; i < pages; i++) {
-		__set_fixmap(FIX_EFI_IO_MAP_FIRST_PAGE - pages_mapped,
-			     phys_addr, PAGE_KERNEL);
-		phys_addr += PAGE_SIZE;
-		pages_mapped++;
-	}
-
-	return (void __iomem *)__fix_to_virt(FIX_EFI_IO_MAP_FIRST_PAGE - \
-					     (pages_mapped - pages)) + offset;
+	return (void __iomem *)__va(phys_addr);
 }
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index b0f61f0..f2f8540 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -136,7 +136,7 @@
 #ifdef CONFIG_X86_32
 	if (!HAVE_HWFP) {
 		memset(tsk->thread.xstate, 0, xstate_size);
-		finit();
+		finit_task(tsk);
 		set_stopped_child_used_math(tsk);
 		return 0;
 	}
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 5a4c23d..06ca07f 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -1388,7 +1388,7 @@
 #ifdef CONFIG_X86_32
 # define IS_IA32	1
 #elif defined CONFIG_IA32_EMULATION
-# define IS_IA32	test_thread_flag(TIF_IA32)
+# define IS_IA32	is_compat_task()
 #else
 # define IS_IA32	0
 #endif
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 2b46eb4..4526b3a 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -217,6 +217,14 @@
 			DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq"),
 		},
 	},
+	{	/* Handle problems with rebooting on Dell XPS710 */
+		.callback = set_bios_reboot,
+		.ident = "Dell XPS710",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Dell XPS710"),
+		},
+	},
 	{ }
 };
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index c461f6d..6a8811a 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -770,6 +770,9 @@
 
 	finish_e820_parsing();
 
+	if (efi_enabled)
+		efi_init();
+
 	dmi_scan_machine();
 
 	dmi_check_system(bad_bios_dmi_table);
@@ -789,8 +792,6 @@
 	insert_resource(&iomem_resource, &data_resource);
 	insert_resource(&iomem_resource, &bss_resource);
 
-	if (efi_enabled)
-		efi_init();
 
 #ifdef CONFIG_X86_32
 	if (ppro_with_ram_bug()) {
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 92f1c6f..960a8d9 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -343,6 +343,11 @@
 		 * flush_tlb_user() for both user and kernel mappings unless
 		 * the Page Global Enable (PGE) feature bit is set. */
 		*dx |= 0x00002000;
+		/* We also lie, and say we're family id 5.  6 or greater
+		 * leads to a rdmsr in early_init_intel which we can't handle.
+		 * Family ID is returned as bits 8-12 in ax. */
+		*ax &= 0xFFFFF0FF;
+		*ax |= 0x00000500;
 		break;
 	case 0x80000000:
 		/* Futureproof this a little: if they ask how much extended
@@ -589,19 +594,21 @@
 		/* Some systems map "vectors" to interrupts weirdly.  Lguest has
 		 * a straightforward 1 to 1 mapping, so force that here. */
 		__get_cpu_var(vector_irq)[vector] = i;
-		if (vector != SYSCALL_VECTOR) {
-			set_intr_gate(vector,
-				      interrupt[vector-FIRST_EXTERNAL_VECTOR]);
-			set_irq_chip_and_handler_name(i, &lguest_irq_controller,
-						      handle_level_irq,
-						      "level");
-		}
+		if (vector != SYSCALL_VECTOR)
+			set_intr_gate(vector, interrupt[i]);
 	}
 	/* This call is required to set up for 4k stacks, where we have
 	 * separate stacks for hard and soft interrupts. */
 	irq_ctx_init(smp_processor_id());
 }
 
+void lguest_setup_irq(unsigned int irq)
+{
+	irq_to_desc_alloc_cpu(irq, 0);
+	set_irq_chip_and_handler_name(irq, &lguest_irq_controller,
+				      handle_level_irq, "level");
+}
+
 /*
  * Time.
  *
diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
index 7ffcdee..b9cc84a 100644
--- a/arch/x86/mach-voyager/voyager_smp.c
+++ b/arch/x86/mach-voyager/voyager_smp.c
@@ -65,7 +65,7 @@
 
 /* Bitmask of CPUs present in the system - exported by i386_syms.c, used
  * by scheduler but indexed physically */
-cpumask_t phys_cpu_present_map = CPU_MASK_NONE;
+static cpumask_t voyager_phys_cpu_present_map = CPU_MASK_NONE;
 
 /* The internal functions */
 static void send_CPI(__u32 cpuset, __u8 cpi);
@@ -366,19 +366,19 @@
 	/* set up everything for just this CPU, we can alter
 	 * this as we start the other CPUs later */
 	/* now get the CPU disposition from the extended CMOS */
-	cpus_addr(phys_cpu_present_map)[0] =
+	cpus_addr(voyager_phys_cpu_present_map)[0] =
 	    voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK);
-	cpus_addr(phys_cpu_present_map)[0] |=
+	cpus_addr(voyager_phys_cpu_present_map)[0] |=
 	    voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 1) << 8;
-	cpus_addr(phys_cpu_present_map)[0] |=
+	cpus_addr(voyager_phys_cpu_present_map)[0] |=
 	    voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK +
 				       2) << 16;
-	cpus_addr(phys_cpu_present_map)[0] |=
+	cpus_addr(voyager_phys_cpu_present_map)[0] |=
 	    voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK +
 				       3) << 24;
-	init_cpu_possible(&phys_cpu_present_map);
-	printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n",
-	       cpus_addr(phys_cpu_present_map)[0]);
+	init_cpu_possible(&voyager_phys_cpu_present_map);
+	printk("VOYAGER SMP: voyager_phys_cpu_present_map = 0x%lx\n",
+	       cpus_addr(voyager_phys_cpu_present_map)[0]);
 	/* Here we set up the VIC to enable SMP */
 	/* enable the CPIs by writing the base vector to their register */
 	outb(VIC_DEFAULT_CPI_BASE, VIC_CPI_BASE_REGISTER);
@@ -628,15 +628,15 @@
 		/* now that the cat has probed the Voyager System Bus, sanity
 		 * check the cpu map */
 		if (((voyager_quad_processors | voyager_extended_vic_processors)
-		     & cpus_addr(phys_cpu_present_map)[0]) !=
-		    cpus_addr(phys_cpu_present_map)[0]) {
+		     & cpus_addr(voyager_phys_cpu_present_map)[0]) !=
+		    cpus_addr(voyager_phys_cpu_present_map)[0]) {
 			/* should panic */
 			printk("\n\n***WARNING*** "
 			       "Sanity check of CPU present map FAILED\n");
 		}
 	} else if (voyager_level == 4)
 		voyager_extended_vic_processors =
-		    cpus_addr(phys_cpu_present_map)[0];
+		    cpus_addr(voyager_phys_cpu_present_map)[0];
 
 	/* this sets up the idle task to run on the current cpu */
 	voyager_extended_cpus = 1;
@@ -670,7 +670,7 @@
 	/* loop over all the extended VIC CPUs and boot them.  The
 	 * Quad CPUs must be bootstrapped by their extended VIC cpu */
 	for (i = 0; i < nr_cpu_ids; i++) {
-		if (i == boot_cpu_id || !cpu_isset(i, phys_cpu_present_map))
+		if (i == boot_cpu_id || !cpu_isset(i, voyager_phys_cpu_present_map))
 			continue;
 		do_boot_cpu(i);
 		/* This udelay seems to be needed for the Quad boots
diff --git a/arch/x86/math-emu/fpu_aux.c b/arch/x86/math-emu/fpu_aux.c
index 491e737..aa09870 100644
--- a/arch/x86/math-emu/fpu_aux.c
+++ b/arch/x86/math-emu/fpu_aux.c
@@ -30,20 +30,29 @@
 }
 
 /* Needs to be externally visible */
-void finit(void)
+void finit_task(struct task_struct *tsk)
 {
-	control_word = 0x037f;
-	partial_status = 0;
-	top = 0;		/* We don't keep top in the status word internally. */
-	fpu_tag_word = 0xffff;
+	struct i387_soft_struct *soft = &tsk->thread.xstate->soft;
+	struct address *oaddr, *iaddr;
+	soft->cwd = 0x037f;
+	soft->swd = 0;
+	soft->ftop = 0;	/* We don't keep top in the status word internally. */
+	soft->twd = 0xffff;
 	/* The behaviour is different from that detailed in
 	   Section 15.1.6 of the Intel manual */
-	operand_address.offset = 0;
-	operand_address.selector = 0;
-	instruction_address.offset = 0;
-	instruction_address.selector = 0;
-	instruction_address.opcode = 0;
-	no_ip_update = 1;
+	oaddr = (struct address *)&soft->foo;
+	oaddr->offset = 0;
+	oaddr->selector = 0;
+	iaddr = (struct address *)&soft->fip;
+	iaddr->offset = 0;
+	iaddr->selector = 0;
+	iaddr->opcode = 0;
+	soft->no_update = 1;
+}
+
+void finit(void)
+{
+	finit_task(current);
 }
 
 /*
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index e6d36b4..b135225 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -714,6 +714,8 @@
 	pos = start_pfn << PAGE_SHIFT;
 	end_pfn = ((pos + (PMD_SIZE - 1)) >> PMD_SHIFT)
 			<< (PMD_SHIFT - PAGE_SHIFT);
+	if (end_pfn > (end >> PAGE_SHIFT))
+		end_pfn = end >> PAGE_SHIFT;
 	if (start_pfn < end_pfn) {
 		nr_range = save_mr(mr, nr_range, start_pfn, end_pfn, 0);
 		pos = end_pfn << PAGE_SHIFT;
diff --git a/arch/x86/mm/iomap_32.c b/arch/x86/mm/iomap_32.c
index ca53224..04102d4 100644
--- a/arch/x86/mm/iomap_32.c
+++ b/arch/x86/mm/iomap_32.c
@@ -20,6 +20,17 @@
 #include <asm/pat.h>
 #include <linux/module.h>
 
+int is_io_mapping_possible(resource_size_t base, unsigned long size)
+{
+#ifndef CONFIG_X86_PAE
+	/* There is no way to map greater than 1 << 32 address without PAE */
+	if (base + size > 0x100000000ULL)
+		return 0;
+#endif
+	return 1;
+}
+EXPORT_SYMBOL_GPL(is_io_mapping_possible);
+
 /* Map 'pfn' using fixed map 'type' and protections 'prot'
  */
 void *
diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c
index 93d8203..6a518dd 100644
--- a/arch/x86/mm/kmmio.c
+++ b/arch/x86/mm/kmmio.c
@@ -32,11 +32,14 @@
 	struct list_head list;
 	struct kmmio_fault_page *release_next;
 	unsigned long page; /* location of the fault page */
+	bool old_presence; /* page presence prior to arming */
+	bool armed;
 
 	/*
 	 * Number of times this page has been registered as a part
 	 * of a probe. If zero, page is disarmed and this may be freed.
-	 * Used only by writers (RCU).
+	 * Used only by writers (RCU) and post_kmmio_handler().
+	 * Protected by kmmio_lock, when linked into kmmio_page_table.
 	 */
 	int count;
 };
@@ -105,57 +108,85 @@
 	return NULL;
 }
 
-static void set_page_present(unsigned long addr, bool present,
-							unsigned int *pglevel)
+static void set_pmd_presence(pmd_t *pmd, bool present, bool *old)
 {
-	pteval_t pteval;
-	pmdval_t pmdval;
+	pmdval_t v = pmd_val(*pmd);
+	*old = !!(v & _PAGE_PRESENT);
+	v &= ~_PAGE_PRESENT;
+	if (present)
+		v |= _PAGE_PRESENT;
+	set_pmd(pmd, __pmd(v));
+}
+
+static void set_pte_presence(pte_t *pte, bool present, bool *old)
+{
+	pteval_t v = pte_val(*pte);
+	*old = !!(v & _PAGE_PRESENT);
+	v &= ~_PAGE_PRESENT;
+	if (present)
+		v |= _PAGE_PRESENT;
+	set_pte_atomic(pte, __pte(v));
+}
+
+static int set_page_presence(unsigned long addr, bool present, bool *old)
+{
 	unsigned int level;
-	pmd_t *pmd;
 	pte_t *pte = lookup_address(addr, &level);
 
 	if (!pte) {
 		pr_err("kmmio: no pte for page 0x%08lx\n", addr);
-		return;
+		return -1;
 	}
 
-	if (pglevel)
-		*pglevel = level;
-
 	switch (level) {
 	case PG_LEVEL_2M:
-		pmd = (pmd_t *)pte;
-		pmdval = pmd_val(*pmd) & ~_PAGE_PRESENT;
-		if (present)
-			pmdval |= _PAGE_PRESENT;
-		set_pmd(pmd, __pmd(pmdval));
+		set_pmd_presence((pmd_t *)pte, present, old);
 		break;
-
 	case PG_LEVEL_4K:
-		pteval = pte_val(*pte) & ~_PAGE_PRESENT;
-		if (present)
-			pteval |= _PAGE_PRESENT;
-		set_pte_atomic(pte, __pte(pteval));
+		set_pte_presence(pte, present, old);
 		break;
-
 	default:
 		pr_err("kmmio: unexpected page level 0x%x.\n", level);
-		return;
+		return -1;
 	}
 
 	__flush_tlb_one(addr);
+	return 0;
 }
 
-/** Mark the given page as not present. Access to it will trigger a fault. */
-static void arm_kmmio_fault_page(unsigned long page, unsigned int *pglevel)
+/*
+ * Mark the given page as not present. Access to it will trigger a fault.
+ *
+ * Struct kmmio_fault_page is protected by RCU and kmmio_lock, but the
+ * protection is ignored here. RCU read lock is assumed held, so the struct
+ * will not disappear unexpectedly. Furthermore, the caller must guarantee,
+ * that double arming the same virtual address (page) cannot occur.
+ *
+ * Double disarming on the other hand is allowed, and may occur when a fault
+ * and mmiotrace shutdown happen simultaneously.
+ */
+static int arm_kmmio_fault_page(struct kmmio_fault_page *f)
 {
-	set_page_present(page & PAGE_MASK, false, pglevel);
+	int ret;
+	WARN_ONCE(f->armed, KERN_ERR "kmmio page already armed.\n");
+	if (f->armed) {
+		pr_warning("kmmio double-arm: page 0x%08lx, ref %d, old %d\n",
+					f->page, f->count, f->old_presence);
+	}
+	ret = set_page_presence(f->page, false, &f->old_presence);
+	WARN_ONCE(ret < 0, KERN_ERR "kmmio arming 0x%08lx failed.\n", f->page);
+	f->armed = true;
+	return ret;
 }
 
-/** Mark the given page as present. */
-static void disarm_kmmio_fault_page(unsigned long page, unsigned int *pglevel)
+/** Restore the given page to saved presence state. */
+static void disarm_kmmio_fault_page(struct kmmio_fault_page *f)
 {
-	set_page_present(page & PAGE_MASK, true, pglevel);
+	bool tmp;
+	int ret = set_page_presence(f->page, f->old_presence, &tmp);
+	WARN_ONCE(ret < 0,
+			KERN_ERR "kmmio disarming 0x%08lx failed.\n", f->page);
+	f->armed = false;
 }
 
 /*
@@ -202,28 +233,32 @@
 
 	ctx = &get_cpu_var(kmmio_ctx);
 	if (ctx->active) {
-		disarm_kmmio_fault_page(faultpage->page, NULL);
 		if (addr == ctx->addr) {
 			/*
-			 * On SMP we sometimes get recursive probe hits on the
-			 * same address. Context is already saved, fall out.
+			 * A second fault on the same page means some other
+			 * condition needs handling by do_page_fault(), the
+			 * page really not being present is the most common.
 			 */
-			pr_debug("kmmio: duplicate probe hit on CPU %d, for "
-						"address 0x%08lx.\n",
-						smp_processor_id(), addr);
-			ret = 1;
-			goto no_kmmio_ctx;
-		}
-		/*
-		 * Prevent overwriting already in-flight context.
-		 * This should not happen, let's hope disarming at least
-		 * prevents a panic.
-		 */
-		pr_emerg("kmmio: recursive probe hit on CPU %d, "
+			pr_debug("kmmio: secondary hit for 0x%08lx CPU %d.\n",
+					addr, smp_processor_id());
+
+			if (!faultpage->old_presence)
+				pr_info("kmmio: unexpected secondary hit for "
+					"address 0x%08lx on CPU %d.\n", addr,
+					smp_processor_id());
+		} else {
+			/*
+			 * Prevent overwriting already in-flight context.
+			 * This should not happen, let's hope disarming at
+			 * least prevents a panic.
+			 */
+			pr_emerg("kmmio: recursive probe hit on CPU %d, "
 					"for address 0x%08lx. Ignoring.\n",
 					smp_processor_id(), addr);
-		pr_emerg("kmmio: previous hit was at 0x%08lx.\n",
-					ctx->addr);
+			pr_emerg("kmmio: previous hit was at 0x%08lx.\n",
+						ctx->addr);
+			disarm_kmmio_fault_page(faultpage);
+		}
 		goto no_kmmio_ctx;
 	}
 	ctx->active++;
@@ -244,7 +279,7 @@
 	regs->flags &= ~X86_EFLAGS_IF;
 
 	/* Now we set present bit in PTE and single step. */
-	disarm_kmmio_fault_page(ctx->fpage->page, NULL);
+	disarm_kmmio_fault_page(ctx->fpage);
 
 	/*
 	 * If another cpu accesses the same page while we are stepping,
@@ -275,7 +310,7 @@
 	struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx);
 
 	if (!ctx->active) {
-		pr_debug("kmmio: spurious debug trap on CPU %d.\n",
+		pr_warning("kmmio: spurious debug trap on CPU %d.\n",
 							smp_processor_id());
 		goto out;
 	}
@@ -283,7 +318,11 @@
 	if (ctx->probe && ctx->probe->post_handler)
 		ctx->probe->post_handler(ctx->probe, condition, regs);
 
-	arm_kmmio_fault_page(ctx->fpage->page, NULL);
+	/* Prevent racing against release_kmmio_fault_page(). */
+	spin_lock(&kmmio_lock);
+	if (ctx->fpage->count)
+		arm_kmmio_fault_page(ctx->fpage);
+	spin_unlock(&kmmio_lock);
 
 	regs->flags &= ~X86_EFLAGS_TF;
 	regs->flags |= ctx->saved_flags;
@@ -315,20 +354,24 @@
 	f = get_kmmio_fault_page(page);
 	if (f) {
 		if (!f->count)
-			arm_kmmio_fault_page(f->page, NULL);
+			arm_kmmio_fault_page(f);
 		f->count++;
 		return 0;
 	}
 
-	f = kmalloc(sizeof(*f), GFP_ATOMIC);
+	f = kzalloc(sizeof(*f), GFP_ATOMIC);
 	if (!f)
 		return -1;
 
 	f->count = 1;
 	f->page = page;
-	list_add_rcu(&f->list, kmmio_page_list(f->page));
 
-	arm_kmmio_fault_page(f->page, NULL);
+	if (arm_kmmio_fault_page(f)) {
+		kfree(f);
+		return -1;
+	}
+
+	list_add_rcu(&f->list, kmmio_page_list(f->page));
 
 	return 0;
 }
@@ -347,7 +390,7 @@
 	f->count--;
 	BUG_ON(f->count < 0);
 	if (!f->count) {
-		disarm_kmmio_fault_page(f->page, NULL);
+		disarm_kmmio_fault_page(f);
 		f->release_next = *release_list;
 		*release_list = f;
 	}
@@ -408,23 +451,24 @@
 
 static void remove_kmmio_fault_pages(struct rcu_head *head)
 {
-	struct kmmio_delayed_release *dr = container_of(
-						head,
-						struct kmmio_delayed_release,
-						rcu);
+	struct kmmio_delayed_release *dr =
+		container_of(head, struct kmmio_delayed_release, rcu);
 	struct kmmio_fault_page *p = dr->release_list;
 	struct kmmio_fault_page **prevp = &dr->release_list;
 	unsigned long flags;
+
 	spin_lock_irqsave(&kmmio_lock, flags);
 	while (p) {
-		if (!p->count)
+		if (!p->count) {
 			list_del_rcu(&p->list);
-		else
+			prevp = &p->release_next;
+		} else {
 			*prevp = p->release_next;
-		prevp = &p->release_next;
+		}
 		p = p->release_next;
 	}
 	spin_unlock_irqrestore(&kmmio_lock, flags);
+
 	/* This is the real RCU destroy call. */
 	call_rcu(&dr->rcu, rcu_free_kmmio_fault_pages);
 }
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 7be47d1..7233bd7 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -515,6 +515,17 @@
 	 * primary protection behavior:
 	 */
 	__set_pmd_pte(kpte, address, mk_pte(base, __pgprot(_KERNPG_TABLE)));
+
+	/*
+	 * Intel Atom errata AAH41 workaround.
+	 *
+	 * The real fix should be in hw or in a microcode update, but
+	 * we also probabilistically try to reduce the window of having
+	 * a large TLB mixed with 4K TLBs while instruction fetches are
+	 * going on.
+	 */
+	__flush_tlb_all();
+
 	base = NULL;
 
 out_unlock:
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index aebbf67..e0ab173 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -11,6 +11,7 @@
 #include <linux/bootmem.h>
 #include <linux/debugfs.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/gfp.h>
 #include <linux/mm.h>
 #include <linux/fs.h>
@@ -868,6 +869,7 @@
 	else
 		return pgprot_noncached(prot);
 }
+EXPORT_SYMBOL_GPL(pgprot_writecombine);
 
 #if defined(CONFIG_DEBUG_FS) && defined(CONFIG_X86_PAT)
 
diff --git a/arch/x86/mm/testmmiotrace.c b/arch/x86/mm/testmmiotrace.c
index ab50a8d..427fd1b 100644
--- a/arch/x86/mm/testmmiotrace.c
+++ b/arch/x86/mm/testmmiotrace.c
@@ -1,5 +1,5 @@
 /*
- * Written by Pekka Paalanen, 2008 <pq@iki.fi>
+ * Written by Pekka Paalanen, 2008-2009 <pq@iki.fi>
  */
 #include <linux/module.h>
 #include <linux/io.h>
@@ -9,35 +9,74 @@
 
 static unsigned long mmio_address;
 module_param(mmio_address, ulong, 0);
-MODULE_PARM_DESC(mmio_address, "Start address of the mapping of 16 kB.");
+MODULE_PARM_DESC(mmio_address, " Start address of the mapping of 16 kB "
+				"(or 8 MB if read_far is non-zero).");
+
+static unsigned long read_far = 0x400100;
+module_param(read_far, ulong, 0);
+MODULE_PARM_DESC(read_far, " Offset of a 32-bit read within 8 MB "
+				"(default: 0x400100).");
+
+static unsigned v16(unsigned i)
+{
+	return i * 12 + 7;
+}
+
+static unsigned v32(unsigned i)
+{
+	return i * 212371 + 13;
+}
 
 static void do_write_test(void __iomem *p)
 {
 	unsigned int i;
+	pr_info(MODULE_NAME ": write test.\n");
 	mmiotrace_printk("Write test.\n");
+
 	for (i = 0; i < 256; i++)
 		iowrite8(i, p + i);
+
 	for (i = 1024; i < (5 * 1024); i += 2)
-		iowrite16(i * 12 + 7, p + i);
+		iowrite16(v16(i), p + i);
+
 	for (i = (5 * 1024); i < (16 * 1024); i += 4)
-		iowrite32(i * 212371 + 13, p + i);
+		iowrite32(v32(i), p + i);
 }
 
 static void do_read_test(void __iomem *p)
 {
 	unsigned int i;
+	unsigned errs[3] = { 0 };
+	pr_info(MODULE_NAME ": read test.\n");
 	mmiotrace_printk("Read test.\n");
+
 	for (i = 0; i < 256; i++)
-		ioread8(p + i);
+		if (ioread8(p + i) != i)
+			++errs[0];
+
 	for (i = 1024; i < (5 * 1024); i += 2)
-		ioread16(p + i);
+		if (ioread16(p + i) != v16(i))
+			++errs[1];
+
 	for (i = (5 * 1024); i < (16 * 1024); i += 4)
-		ioread32(p + i);
+		if (ioread32(p + i) != v32(i))
+			++errs[2];
+
+	mmiotrace_printk("Read errors: 8-bit %d, 16-bit %d, 32-bit %d.\n",
+						errs[0], errs[1], errs[2]);
 }
 
-static void do_test(void)
+static void do_read_far_test(void __iomem *p)
 {
-	void __iomem *p = ioremap_nocache(mmio_address, 0x4000);
+	pr_info(MODULE_NAME ": read far test.\n");
+	mmiotrace_printk("Read far test.\n");
+
+	ioread32(p + read_far);
+}
+
+static void do_test(unsigned long size)
+{
+	void __iomem *p = ioremap_nocache(mmio_address, size);
 	if (!p) {
 		pr_err(MODULE_NAME ": could not ioremap, aborting.\n");
 		return;
@@ -45,11 +84,15 @@
 	mmiotrace_printk("ioremap returned %p.\n", p);
 	do_write_test(p);
 	do_read_test(p);
+	if (read_far && read_far < size - 4)
+		do_read_far_test(p);
 	iounmap(p);
 }
 
 static int __init init(void)
 {
+	unsigned long size = (read_far) ? (8 << 20) : (16 << 10);
+
 	if (mmio_address == 0) {
 		pr_err(MODULE_NAME ": you have to use the module argument "
 							"mmio_address.\n");
@@ -58,10 +101,11 @@
 		return -ENXIO;
 	}
 
-	pr_warning(MODULE_NAME ": WARNING: mapping 16 kB @ 0x%08lx "
-					"in PCI address space, and writing "
-					"rubbish in there.\n", mmio_address);
-	do_test();
+	pr_warning(MODULE_NAME ": WARNING: mapping %lu kB @ 0x%08lx in PCI "
+		"address space, and writing 16 kB of rubbish in there.\n",
+		 size >> 10, mmio_address);
+	do_test(size);
+	pr_info(MODULE_NAME ": All done.\n");
 	return 0;
 }
 
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index e9f80c7..10131fb 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -78,8 +78,18 @@
 	if (cpu_has_arch_perfmon) {
 		union cpuid10_eax eax;
 		eax.full = cpuid_eax(0xa);
-		if (counter_width < eax.split.bit_width)
-			counter_width = eax.split.bit_width;
+
+		/*
+		 * For Core2 (family 6, model 15), don't reset the
+		 * counter width:
+		 */
+		if (!(eax.split.version_id == 0 &&
+			current_cpu_data.x86 == 6 &&
+				current_cpu_data.x86_model == 15)) {
+
+			if (counter_width < eax.split.bit_width)
+				counter_width = eax.split.bit_width;
+		}
 	}
 
 	/* clear all counters */
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index bea2152..b58e963 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1672,6 +1672,9 @@
 	   possible map and a non-dummy shared_info. */
 	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
 
+	local_irq_disable();
+	early_boot_irqs_off();
+
 	xen_raw_console_write("mapping kernel into physical memory\n");
 	pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages);
 
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 6c873dc..9812008 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -103,9 +103,6 @@
 	help
 	Can we use information of configuration file?
 
-config HIGHMEM
-	bool "High memory support"
-
 endmenu
 
 menu "Platform options"
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 9606d2b..4ec1633 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -44,6 +44,8 @@
 #include <asm/setup.h>
 #include <asm/param.h>
 
+#include <platform/hardware.h>
+
 #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
 struct screen_info screen_info = { 0, 24, 0, 0, 0, 80, 0, 0, 0, 24, 1, 16};
 #endif
diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
index c7a021d..c44f830 100644
--- a/arch/xtensa/kernel/traps.c
+++ b/arch/xtensa/kernel/traps.c
@@ -30,6 +30,7 @@
 #include <linux/stringify.h>
 #include <linux/kallsyms.h>
 #include <linux/delay.h>
+#include <linux/hardirq.h>
 
 #include <asm/ptrace.h>
 #include <asm/timex.h>
diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c
index 33f366b..bdd860d 100644
--- a/arch/xtensa/mm/fault.c
+++ b/arch/xtensa/mm/fault.c
@@ -14,6 +14,7 @@
 
 #include <linux/mm.h>
 #include <linux/module.h>
+#include <linux/hardirq.h>
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 #include <asm/hardirq.h>
diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
index efed889..25d46c8 100644
--- a/arch/xtensa/platforms/iss/console.c
+++ b/arch/xtensa/platforms/iss/console.c
@@ -140,16 +140,14 @@
 }
 
 
-static void rs_put_char(struct tty_struct *tty, unsigned char ch)
+static int rs_put_char(struct tty_struct *tty, unsigned char ch)
 {
 	char buf[2];
 
-	if (!tty)
-		return;
-
 	buf[0] = ch;
 	buf[1] = '\0';		/* Is this NULL necessary? */
 	__simc (SYS_write, 1, (unsigned long) buf, 1, 0, 0);
+	return 1;
 }
 
 static void rs_flush_chars(struct tty_struct *tty)
diff --git a/block/blk-merge.c b/block/blk-merge.c
index b92f5b0..5a244f0 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -38,72 +38,77 @@
 	}
 }
 
-void blk_recalc_rq_segments(struct request *rq)
+static unsigned int __blk_recalc_rq_segments(struct request_queue *q,
+					     struct bio *bio)
 {
-	int nr_phys_segs;
 	unsigned int phys_size;
 	struct bio_vec *bv, *bvprv = NULL;
-	int seg_size;
-	int cluster;
-	struct req_iterator iter;
-	int high, highprv = 1;
-	struct request_queue *q = rq->q;
+	int cluster, i, high, highprv = 1;
+	unsigned int seg_size, nr_phys_segs;
+	struct bio *fbio, *bbio;
 
-	if (!rq->bio)
-		return;
+	if (!bio)
+		return 0;
 
+	fbio = bio;
 	cluster = test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
 	seg_size = 0;
 	phys_size = nr_phys_segs = 0;
-	rq_for_each_segment(bv, rq, iter) {
-		/*
-		 * the trick here is making sure that a high page is never
-		 * considered part of another segment, since that might
-		 * change with the bounce page.
-		 */
-		high = page_to_pfn(bv->bv_page) > q->bounce_pfn;
-		if (high || highprv)
-			goto new_segment;
-		if (cluster) {
-			if (seg_size + bv->bv_len > q->max_segment_size)
+	for_each_bio(bio) {
+		bio_for_each_segment(bv, bio, i) {
+			/*
+			 * the trick here is making sure that a high page is
+			 * never considered part of another segment, since that
+			 * might change with the bounce page.
+			 */
+			high = page_to_pfn(bv->bv_page) > q->bounce_pfn;
+			if (high || highprv)
 				goto new_segment;
-			if (!BIOVEC_PHYS_MERGEABLE(bvprv, bv))
-				goto new_segment;
-			if (!BIOVEC_SEG_BOUNDARY(q, bvprv, bv))
-				goto new_segment;
+			if (cluster) {
+				if (seg_size + bv->bv_len > q->max_segment_size)
+					goto new_segment;
+				if (!BIOVEC_PHYS_MERGEABLE(bvprv, bv))
+					goto new_segment;
+				if (!BIOVEC_SEG_BOUNDARY(q, bvprv, bv))
+					goto new_segment;
 
-			seg_size += bv->bv_len;
-			bvprv = bv;
-			continue;
-		}
+				seg_size += bv->bv_len;
+				bvprv = bv;
+				continue;
+			}
 new_segment:
-		if (nr_phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size)
-			rq->bio->bi_seg_front_size = seg_size;
+			if (nr_phys_segs == 1 && seg_size >
+			    fbio->bi_seg_front_size)
+				fbio->bi_seg_front_size = seg_size;
 
-		nr_phys_segs++;
-		bvprv = bv;
-		seg_size = bv->bv_len;
-		highprv = high;
+			nr_phys_segs++;
+			bvprv = bv;
+			seg_size = bv->bv_len;
+			highprv = high;
+		}
+		bbio = bio;
 	}
 
-	if (nr_phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size)
-		rq->bio->bi_seg_front_size = seg_size;
-	if (seg_size > rq->biotail->bi_seg_back_size)
-		rq->biotail->bi_seg_back_size = seg_size;
+	if (nr_phys_segs == 1 && seg_size > fbio->bi_seg_front_size)
+		fbio->bi_seg_front_size = seg_size;
+	if (seg_size > bbio->bi_seg_back_size)
+		bbio->bi_seg_back_size = seg_size;
 
-	rq->nr_phys_segments = nr_phys_segs;
+	return nr_phys_segs;
+}
+
+void blk_recalc_rq_segments(struct request *rq)
+{
+	rq->nr_phys_segments = __blk_recalc_rq_segments(rq->q, rq->bio);
 }
 
 void blk_recount_segments(struct request_queue *q, struct bio *bio)
 {
-	struct request rq;
 	struct bio *nxt = bio->bi_next;
-	rq.q = q;
-	rq.bio = rq.biotail = bio;
+
 	bio->bi_next = NULL;
-	blk_recalc_rq_segments(&rq);
+	bio->bi_phys_segments = __blk_recalc_rq_segments(q, bio);
 	bio->bi_next = nxt;
-	bio->bi_phys_segments = rq.nr_phys_segments;
 	bio->bi_flags |= (1 << BIO_SEG_VALID);
 }
 EXPORT_SYMBOL(blk_recount_segments);
diff --git a/block/genhd.c b/block/genhd.c
index e1eadcc..a9ec910 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -256,6 +256,22 @@
 }
 #endif /* CONFIG_PROC_FS */
 
+/**
+ * register_blkdev - register a new block device
+ *
+ * @major: the requested major device number [1..255]. If @major=0, try to
+ *         allocate any unused major number.
+ * @name: the name of the new block device as a zero terminated string
+ *
+ * The @name must be unique within the system.
+ *
+ * The return value depends on the @major input parameter.
+ *  - if a major device number was requested in range [1..255] then the
+ *    function returns zero on success, or a negative error code
+ *  - if any unused major number was requested with @major=0 parameter
+ *    then the return value is the allocated major number in range
+ *    [1..255] or a negative error code otherwise
+ */
 int register_blkdev(unsigned int major, const char *name)
 {
 	struct blk_major_name **n, *p;
diff --git a/crypto/api.c b/crypto/api.c
index efe77df..38a2bc0 100644
--- a/crypto/api.c
+++ b/crypto/api.c
@@ -215,8 +215,19 @@
 	mask &= ~(CRYPTO_ALG_LARVAL | CRYPTO_ALG_DEAD);
 	type &= mask;
 
-	alg = try_then_request_module(crypto_alg_lookup(name, type, mask),
-				      name);
+	alg = crypto_alg_lookup(name, type, mask);
+	if (!alg) {
+		char tmp[CRYPTO_MAX_ALG_NAME];
+
+		request_module(name);
+
+		if (!((type ^ CRYPTO_ALG_NEED_FALLBACK) & mask) &&
+		    snprintf(tmp, sizeof(tmp), "%s-all", name) < sizeof(tmp))
+			request_module(tmp);
+
+		alg = crypto_alg_lookup(name, type, mask);
+	}
+
 	if (alg)
 		return crypto_is_larval(alg) ? crypto_larval_wait(alg) : alg;
 
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index a603bbf..66e012c 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -582,18 +582,18 @@
 	{ PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci },		/* MCP79 */
 	{ PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci },		/* MCP79 */
 	{ PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci },		/* MCP79 */
-	{ PCI_VDEVICE(NVIDIA, 0x0bc8), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bc9), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bca), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bcb), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bcc), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bc4), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bc5), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bc6), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci },		/* MCP7B */
+	{ PCI_VDEVICE(NVIDIA, 0x0d84), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d85), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d86), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d87), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d88), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d89), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d8a), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d8b), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d8c), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d8d), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d8e), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d8f), board_ahci },		/* MCP89 */
 
 	/* SiS */
 	{ PCI_VDEVICE(SI, 0x1184), board_ahci },		/* SiS 966 */
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 9fbf059..060bcd6 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1322,14 +1322,16 @@
 {
 	if (ata_id_has_lba(id)) {
 		if (ata_id_has_lba48(id))
-			return ata_id_u64(id, 100);
+			return ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
 		else
-			return ata_id_u32(id, 60);
+			return ata_id_u32(id, ATA_ID_LBA_CAPACITY);
 	} else {
 		if (ata_id_current_chs_valid(id))
-			return ata_id_u32(id, 57);
+			return id[ATA_ID_CUR_CYLS] * id[ATA_ID_CUR_HEADS] *
+			       id[ATA_ID_CUR_SECTORS];
 		else
-			return id[1] * id[3] * id[6];
+			return id[ATA_ID_CYLS] * id[ATA_ID_HEADS] *
+			       id[ATA_ID_SECTORS];
 	}
 }
 
@@ -4612,7 +4614,7 @@
 	VPRINTK("unmapping %u sg elements\n", qc->n_elem);
 
 	if (qc->n_elem)
-		dma_unmap_sg(ap->dev, sg, qc->n_elem, dir);
+		dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir);
 
 	qc->flags &= ~ATA_QCFLAG_DMAMAP;
 	qc->sg = NULL;
@@ -4727,7 +4729,7 @@
 		return -1;
 
 	DPRINTK("%d sg elements mapped\n", n_elem);
-
+	qc->orig_n_elem = qc->n_elem;
 	qc->n_elem = n_elem;
 	qc->flags |= ATA_QCFLAG_DMAMAP;
 
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index ce2ef04..ea89091 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2423,11 +2423,14 @@
 		}
 
 		/* prereset() might have cleared ATA_EH_RESET.  If so,
-		 * bang classes and return.
+		 * bang classes, thaw and return.
 		 */
 		if (reset && !(ehc->i.action & ATA_EH_RESET)) {
 			ata_for_each_dev(dev, link, ALL)
 				classes[dev->devno] = ATA_DEV_NONE;
+			if ((ap->pflags & ATA_PFLAG_FROZEN) &&
+			    ata_is_host_link(link))
+				ata_eh_thaw_port(ap);
 			rc = 0;
 			goto out;
 		}
@@ -2901,7 +2904,7 @@
 	int i;
 
 	for (i = 0; i < ATA_EH_UA_TRIES; i++) {
-		u8 sense_buffer[SCSI_SENSE_BUFFERSIZE];
+		u8 *sense_buffer = dev->link->ap->sector_buf;
 		u8 sense_key = 0;
 		unsigned int err_mask;
 
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 63719ab..115b1cd 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -24,7 +24,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.3.11"
+#define DRV_VERSION "0.4.1"
 
 /**
  *	timing_setup		-	shared timing computation and load
@@ -145,6 +145,13 @@
 	return ata_sff_prereset(link, deadline);
 }
 
+/**
+ *	amd_cable_detect	-	report cable type
+ *	@ap: port
+ *
+ *	AMD controller/BIOS setups record the cable type in word 0x42
+ */
+
 static int amd_cable_detect(struct ata_port *ap)
 {
 	static const u32 bitmask[2] = {0x03, 0x0C};
@@ -158,6 +165,40 @@
 }
 
 /**
+ *	amd_fifo_setup		-	set the PIO FIFO for ATA/ATAPI
+ *	@ap: ATA interface
+ *	@adev: ATA device
+ *
+ *	Set the PCI fifo for this device according to the devices present
+ *	on the bus at this point in time. We need to turn the post write buffer
+ *	off for ATAPI devices as we may need to issue a word sized write to the
+ *	device as the final I/O
+ */
+
+static void amd_fifo_setup(struct ata_port *ap)
+{
+	struct ata_device *adev;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	static const u8 fifobit[2] = { 0xC0, 0x30};
+	u8 fifo = fifobit[ap->port_no];
+	u8 r;
+
+
+	ata_for_each_dev(adev, &ap->link, ENABLED) {
+		if (adev->class == ATA_DEV_ATAPI)
+			fifo = 0;
+	}
+	if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411) /* FIFO is broken */
+		fifo = 0;
+
+	/* On the later chips the read prefetch bits become no-op bits */
+	pci_read_config_byte(pdev, 0x41, &r);
+	r &= ~fifobit[ap->port_no];
+	r |= fifo;
+	pci_write_config_byte(pdev, 0x41, r);
+}
+
+/**
  *	amd33_set_piomode	-	set initial PIO mode data
  *	@ap: ATA interface
  *	@adev: ATA device
@@ -167,21 +208,25 @@
 
 static void amd33_set_piomode(struct ata_port *ap, struct ata_device *adev)
 {
+	amd_fifo_setup(ap);
 	timing_setup(ap, adev, 0x40, adev->pio_mode, 1);
 }
 
 static void amd66_set_piomode(struct ata_port *ap, struct ata_device *adev)
 {
+	amd_fifo_setup(ap);
 	timing_setup(ap, adev, 0x40, adev->pio_mode, 2);
 }
 
 static void amd100_set_piomode(struct ata_port *ap, struct ata_device *adev)
 {
+	amd_fifo_setup(ap);
 	timing_setup(ap, adev, 0x40, adev->pio_mode, 3);
 }
 
 static void amd133_set_piomode(struct ata_port *ap, struct ata_device *adev)
 {
+	amd_fifo_setup(ap);
 	timing_setup(ap, adev, 0x40, adev->pio_mode, 4);
 }
 
@@ -397,6 +442,16 @@
 	.set_dmamode	= nv133_set_dmamode,
 };
 
+static void amd_clear_fifo(struct pci_dev *pdev)
+{
+	u8 fifo;
+	/* Disable the FIFO, the FIFO logic will re-enable it as
+	   appropriate */
+	pci_read_config_byte(pdev, 0x41, &fifo);
+	fifo &= 0x0F;
+	pci_write_config_byte(pdev, 0x41, fifo);
+}
+
 static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info[10] = {
@@ -503,14 +558,8 @@
 
 	if (type < 3)
 		ata_pci_bmdma_clear_simplex(pdev);
-
-	/* Check for AMD7411 */
-	if (type == 3)
-		/* FIFO is broken */
-		pci_write_config_byte(pdev, 0x41, fifo & 0x0F);
-	else
-		pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
-
+	if (pdev->vendor == PCI_VENDOR_ID_AMD)
+		amd_clear_fifo(pdev);
 	/* Cable detection on Nvidia chips doesn't work too well,
 	 * cache BIOS programmed UDMA mode.
 	 */
@@ -536,18 +585,11 @@
 		return rc;
 
 	if (pdev->vendor == PCI_VENDOR_ID_AMD) {
-		u8 fifo;
-		pci_read_config_byte(pdev, 0x41, &fifo);
-		if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411)
-			/* FIFO is broken */
-			pci_write_config_byte(pdev, 0x41, fifo & 0x0F);
-		else
-			pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
+		amd_clear_fifo(pdev);
 		if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7409 ||
 		    pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
 			ata_pci_bmdma_clear_simplex(pdev);
 	}
-
 	ata_host_resume(host);
 	return 0;
 }
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index f1bb2f9..b05b86a 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -557,6 +557,9 @@
 		id[83] |= 0x4400;	/* Word 83 is valid and LBA48 */
 		id[86] |= 0x0400;	/* LBA48 on */
 		id[ATA_ID_MAJOR_VER] |= 0x1F;
+		/* Clear the serial number because it's different each boot
+		   which breaks validation on resume */
+		memset(&id[ATA_ID_SERNO], 0x20, ATA_ID_SERNO_LEN);
 	}
 	return err_mask;
 }
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 6c1d778..e3bc1b4 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -283,9 +283,10 @@
 static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
 			unsigned char *buf, unsigned int buflen, int rw)
 {
-	if (ata_id_has_dword_io(dev->id)) {
+	int slop = buflen & 3;
+	/* 32bit I/O capable *and* we need to write a whole number of dwords */
+	if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)) {
 		struct ata_port *ap = dev->link->ap;
-		int slop = buflen & 3;
 		unsigned long flags;
 
 		local_irq_save(flags);
@@ -735,7 +736,7 @@
 	struct ata_port *ap = adev->link->ap;
 	int slop = buflen & 3;
 
-	if (ata_id_has_dword_io(adev->id)) {
+	if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)) {
 		if (rw == WRITE)
 			iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
 		else
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 4ae1a41..7007edd 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -3114,19 +3114,17 @@
 		writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
 	}
 
-	if (!IS_SOC(hpriv)) {
-		/* Clear any currently outstanding host interrupt conditions */
-		writelfl(0, mmio + hpriv->irq_cause_ofs);
+	/* Clear any currently outstanding host interrupt conditions */
+	writelfl(0, mmio + hpriv->irq_cause_ofs);
 
-		/* and unmask interrupt generation for host regs */
-		writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs);
+	/* and unmask interrupt generation for host regs */
+	writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs);
 
-		/*
-		 * enable only global host interrupts for now.
-		 * The per-port interrupts get done later as ports are set up.
-		 */
-		mv_set_main_irq_mask(host, 0, PCI_ERR);
-	}
+	/*
+	 * enable only global host interrupts for now.
+	 * The per-port interrupts get done later as ports are set up.
+	 */
+	mv_set_main_irq_mask(host, 0, PCI_ERR);
 done:
 	return rc;
 }
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 55a8eed..f65b537 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -2523,7 +2523,7 @@
 module_init(nv_init);
 module_exit(nv_exit);
 module_param_named(adma, adma_enabled, bool, 0444);
-MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: true)");
+MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: false)");
 module_param_named(swncq, swncq_enabled, bool, 0444);
 MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: true)");
 
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 43fa90b..f8f578a 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -303,7 +303,7 @@
 	sect_start_pfn = section_nr_to_pfn(mem_blk->phys_index);
 	sect_end_pfn = sect_start_pfn + PAGES_PER_SECTION - 1;
 	for (pfn = sect_start_pfn; pfn <= sect_end_pfn; pfn++) {
-		unsigned int nid;
+		int nid;
 
 		nid = get_nid_for_pfn(pfn);
 		if (nid < 0)
diff --git a/drivers/block/aoe/aoedev.c b/drivers/block/aoe/aoedev.c
index cc25057..eeea477 100644
--- a/drivers/block/aoe/aoedev.c
+++ b/drivers/block/aoe/aoedev.c
@@ -173,7 +173,7 @@
 		return;
 	while (atomic_read(&skb_shinfo(skb)->dataref) != 1 && i-- > 0)
 		msleep(Sms);
-	if (i <= 0) {
+	if (i < 0) {
 		printk(KERN_ERR
 			"aoe: %s holds ref: %s\n",
 			skb->dev ? skb->dev->name : "netif",
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index d2cb67b..4f9b6d7 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3606,16 +3606,18 @@
 		if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev))
 			return -ENODEV;
 
-		/* Some devices (notably the HP Smart Array 5i Controller)
-		   need a little pause here */
-		schedule_timeout_uninterruptible(30*HZ);
-
-		/* Now try to get the controller to respond to a no-op */
-		for (i=0; i<12; i++) {
+		/* Now try to get the controller to respond to a no-op. Some
+		   devices (notably the HP Smart Array 5i Controller) need
+		   up to 30 seconds to respond. */
+		for (i=0; i<30; i++) {
 			if (cciss_noop(pdev) == 0)
 				break;
-			else
-				printk("cciss: no-op failed%s\n", (i < 11 ? "; re-trying" : ""));
+
+			schedule_timeout_uninterruptible(HZ);
+		}
+		if (i == 30) {
+			printk(KERN_ERR "cciss: controller seems dead\n");
+			return -EBUSY;
 		}
 	}
 
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index edbaac6..bf03455 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -392,8 +392,7 @@
 	struct loop_device *lo = p->lo;
 	struct page *page = buf->page;
 	sector_t IV;
-	size_t size;
-	int ret;
+	int size, ret;
 
 	ret = buf->ops->confirm(pipe, buf);
 	if (unlikely(ret))
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 918ef725..8f90508 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -40,6 +40,7 @@
 #include <linux/hdreg.h>
 #include <linux/cdrom.h>
 #include <linux/module.h>
+#include <linux/scatterlist.h>
 
 #include <xen/xenbus.h>
 #include <xen/grant_table.h>
@@ -82,6 +83,7 @@
 	enum blkif_state connected;
 	int ring_ref;
 	struct blkif_front_ring ring;
+	struct scatterlist sg[BLKIF_MAX_SEGMENTS_PER_REQUEST];
 	unsigned int evtchn, irq;
 	struct request_queue *rq;
 	struct work_struct work;
@@ -204,12 +206,11 @@
 	struct blkfront_info *info = req->rq_disk->private_data;
 	unsigned long buffer_mfn;
 	struct blkif_request *ring_req;
-	struct req_iterator iter;
-	struct bio_vec *bvec;
 	unsigned long id;
 	unsigned int fsect, lsect;
-	int ref;
+	int i, ref;
 	grant_ref_t gref_head;
+	struct scatterlist *sg;
 
 	if (unlikely(info->connected != BLKIF_STATE_CONNECTED))
 		return 1;
@@ -238,12 +239,13 @@
 	if (blk_barrier_rq(req))
 		ring_req->operation = BLKIF_OP_WRITE_BARRIER;
 
-	ring_req->nr_segments = 0;
-	rq_for_each_segment(bvec, req, iter) {
-		BUG_ON(ring_req->nr_segments == BLKIF_MAX_SEGMENTS_PER_REQUEST);
-		buffer_mfn = pfn_to_mfn(page_to_pfn(bvec->bv_page));
-		fsect = bvec->bv_offset >> 9;
-		lsect = fsect + (bvec->bv_len >> 9) - 1;
+	ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
+	BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST);
+
+	for_each_sg(info->sg, sg, ring_req->nr_segments, i) {
+		buffer_mfn = pfn_to_mfn(page_to_pfn(sg_page(sg)));
+		fsect = sg->offset >> 9;
+		lsect = fsect + (sg->length >> 9) - 1;
 		/* install a grant reference. */
 		ref = gnttab_claim_grant_reference(&gref_head);
 		BUG_ON(ref == -ENOSPC);
@@ -254,16 +256,12 @@
 				buffer_mfn,
 				rq_data_dir(req) );
 
-		info->shadow[id].frame[ring_req->nr_segments] =
-				mfn_to_pfn(buffer_mfn);
-
-		ring_req->seg[ring_req->nr_segments] =
+		info->shadow[id].frame[i] = mfn_to_pfn(buffer_mfn);
+		ring_req->seg[i] =
 				(struct blkif_request_segment) {
 					.gref       = ref,
 					.first_sect = fsect,
 					.last_sect  = lsect };
-
-		ring_req->nr_segments++;
 	}
 
 	info->ring.req_prod_pvt++;
@@ -622,6 +620,8 @@
 	SHARED_RING_INIT(sring);
 	FRONT_RING_INIT(&info->ring, sring, PAGE_SIZE);
 
+	sg_init_table(info->sg, BLKIF_MAX_SEGMENTS_PER_REQUEST);
+
 	err = xenbus_grant_ring(dev, virt_to_mfn(info->ring.sring));
 	if (err < 0) {
 		free_page((unsigned long)sring);
@@ -977,6 +977,8 @@
 		break;
 
 	case XenbusStateClosing:
+		if (info->gd == NULL)
+			xenbus_dev_fatal(dev, -ENODEV, "gd is NULL");
 		bd = bdget_disk(info->gd, 0);
 		if (bd == NULL)
 			xenbus_dev_fatal(dev, -ENODEV, "bdget failed");
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 52f4361..d765afd 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -271,15 +271,15 @@
 	nb_order = (nb_order >> 1) & 7;
 	pci_read_config_dword(nb, AMD64_GARTAPERTUREBASE, &nb_base);
 	nb_aper = nb_base << 25;
-	if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order)) {
-		return 0;
-	}
 
 	/* Northbridge seems to contain crap. Try the AGP bridge. */
 
 	pci_read_config_word(agp, cap+0x14, &apsize);
-	if (apsize == 0xffff)
+	if (apsize == 0xffff) {
+		if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order))
+			return 0;
 		return -1;
+	}
 
 	apsize &= 0xfff;
 	/* Some BIOS use weird encodings not in the AGPv3 table. */
@@ -301,6 +301,11 @@
 		order = nb_order;
 	}
 
+	if (nb_order >= order) {
+		if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order))
+			return 0;
+	}
+
 	dev_info(&agp->dev, "aperture from AGP @ %Lx size %u MB\n",
 		 aper, 32 << order);
 	if (order < 0 || !agp_aperture_valid(aper, (32*1024*1024)<<order))
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index c771418..4373adb 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -633,13 +633,15 @@
 			break;
 		}
 	}
-	if (gtt_entries > 0)
+	if (gtt_entries > 0) {
 		dev_info(&agp_bridge->dev->dev, "detected %dK %s memory\n",
 		       gtt_entries / KB(1), local ? "local" : "stolen");
-	else
+		gtt_entries /= KB(4);
+	} else {
 		dev_info(&agp_bridge->dev->dev,
 		       "no pre-allocated video memory detected\n");
-	gtt_entries /= KB(4);
+		gtt_entries = 0;
+	}
 
 	intel_private.gtt_entries = gtt_entries;
 }
diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c
index 6e6eb44..c76bccf 100644
--- a/drivers/char/hvcs.c
+++ b/drivers/char/hvcs.c
@@ -1139,15 +1139,6 @@
 	hvcsd->tty = tty;
 	tty->driver_data = hvcsd;
 
-	/*
-	 * Set this driver to low latency so that we actually have a chance at
-	 * catching a throttled TTY after we flip_buffer_push.  Otherwise the
-	 * flush_to_async may not execute until after the kernel_thread has
-	 * yielded and resumed the next flip_buffer_push resulting in data
-	 * loss.
-	 */
-	tty->low_latency = 1;
-
 	memset(&hvcsd->buffer[0], 0x00, HVCS_BUFF_LEN);
 
 	/*
diff --git a/drivers/char/hvsi.c b/drivers/char/hvsi.c
index 406f874..2989056 100644
--- a/drivers/char/hvsi.c
+++ b/drivers/char/hvsi.c
@@ -810,7 +810,6 @@
 	hp = &hvsi_ports[line];
 
 	tty->driver_data = hp;
-	tty->low_latency = 1; /* avoid throttle/tty_flip_buffer_push race */
 
 	mb();
 	if (hp->state == HVSI_FSP_DIED)
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index b55cb67..d6daf3c 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -754,11 +754,6 @@
 	.release	= cpufreq_sysfs_release,
 };
 
-static struct kobj_type ktype_empty_cpufreq = {
-	.sysfs_ops	= &sysfs_ops,
-	.release	= cpufreq_sysfs_release,
-};
-
 
 /**
  * cpufreq_add_dev - add a CPU device
@@ -892,36 +887,26 @@
 	memcpy(&new_policy, policy, sizeof(struct cpufreq_policy));
 
 	/* prepare interface data */
-	if (!cpufreq_driver->hide_interface) {
-		ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq,
-					   &sys_dev->kobj, "cpufreq");
+	ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &sys_dev->kobj,
+				   "cpufreq");
+	if (ret)
+		goto err_out_driver_exit;
+
+	/* set up files for this cpu device */
+	drv_attr = cpufreq_driver->attr;
+	while ((drv_attr) && (*drv_attr)) {
+		ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr));
 		if (ret)
 			goto err_out_driver_exit;
-
-		/* set up files for this cpu device */
-		drv_attr = cpufreq_driver->attr;
-		while ((drv_attr) && (*drv_attr)) {
-			ret = sysfs_create_file(&policy->kobj,
-						&((*drv_attr)->attr));
-			if (ret)
-				goto err_out_driver_exit;
-			drv_attr++;
-		}
-		if (cpufreq_driver->get) {
-			ret = sysfs_create_file(&policy->kobj,
-						&cpuinfo_cur_freq.attr);
-			if (ret)
-				goto err_out_driver_exit;
-		}
-		if (cpufreq_driver->target) {
-			ret = sysfs_create_file(&policy->kobj,
-						&scaling_cur_freq.attr);
-			if (ret)
-				goto err_out_driver_exit;
-		}
-	} else {
-		ret = kobject_init_and_add(&policy->kobj, &ktype_empty_cpufreq,
-					   &sys_dev->kobj, "cpufreq");
+		drv_attr++;
+	}
+	if (cpufreq_driver->get) {
+		ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr);
+		if (ret)
+			goto err_out_driver_exit;
+	}
+	if (cpufreq_driver->target) {
+		ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
 		if (ret)
 			goto err_out_driver_exit;
 	}
diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index 2d637e0..d9e751b 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -457,10 +457,12 @@
 	if (!ctx_pool) {
 		goto err;
 	}
-	ret = qmgr_request_queue(SEND_QID, NPE_QLEN_TOTAL, 0, 0);
+	ret = qmgr_request_queue(SEND_QID, NPE_QLEN_TOTAL, 0, 0,
+				 "ixp_crypto:out", NULL);
 	if (ret)
 		goto err;
-	ret = qmgr_request_queue(RECV_QID, NPE_QLEN, 0, 0);
+	ret = qmgr_request_queue(RECV_QID, NPE_QLEN, 0, 0,
+				 "ixp_crypto:in", NULL);
 	if (ret) {
 		qmgr_release_queue(SEND_QID);
 		goto err;
diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c
index 856b3cc..3f0fdd1 100644
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -489,4 +489,4 @@
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Michal Ludvig");
 
-MODULE_ALIAS("aes");
+MODULE_ALIAS("aes-all");
diff --git a/drivers/crypto/padlock-sha.c b/drivers/crypto/padlock-sha.c
index a7fbade..a2c8e85 100644
--- a/drivers/crypto/padlock-sha.c
+++ b/drivers/crypto/padlock-sha.c
@@ -304,7 +304,7 @@
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Michal Ludvig");
 
-MODULE_ALIAS("sha1");
-MODULE_ALIAS("sha256");
+MODULE_ALIAS("sha1-all");
+MODULE_ALIAS("sha256-all");
 MODULE_ALIAS("sha1-padlock");
 MODULE_ALIAS("sha256-padlock");
diff --git a/drivers/dca/dca-core.c b/drivers/dca/dca-core.c
index 33bd753..25b743a 100644
--- a/drivers/dca/dca-core.c
+++ b/drivers/dca/dca-core.c
@@ -1,5 +1,5 @@
 /*
- * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 732fa1e..e190d8b 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -430,13 +430,15 @@
 static void __exit dmatest_exit(void)
 {
 	struct dmatest_chan *dtc, *_dtc;
+	struct dma_chan *chan;
 
 	list_for_each_entry_safe(dtc, _dtc, &dmatest_channels, node) {
 		list_del(&dtc->node);
+		chan = dtc->chan;
 		dmatest_cleanup_channel(dtc);
 		pr_debug("dmatest: dropped channel %s\n",
-			 dma_chan_name(dtc->chan));
-		dma_release_channel(dtc->chan);
+			 dma_chan_name(chan));
+		dma_release_channel(chan);
 	}
 }
 module_exit(dmatest_exit);
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index 70126a6..86d6da4 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -158,7 +158,8 @@
 
 static void dma_halt(struct fsl_dma_chan *fsl_chan)
 {
-	int i = 0;
+	int i;
+
 	DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
 		DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) | FSL_DMA_MR_CA,
 		32);
@@ -166,8 +167,11 @@
 		DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) & ~(FSL_DMA_MR_CS
 		| FSL_DMA_MR_EMS_EN | FSL_DMA_MR_CA), 32);
 
-	while (!dma_is_idle(fsl_chan) && (i++ < 100))
+	for (i = 0; i < 100; i++) {
+		if (dma_is_idle(fsl_chan))
+			break;
 		udelay(10);
+	}
 	if (i >= 100 && !dma_is_idle(fsl_chan))
 		dev_err(fsl_chan->dev, "DMA halt timeout!\n");
 }
diff --git a/drivers/dma/ioat.c b/drivers/dma/ioat.c
index 4105d65..ed83dd9 100644
--- a/drivers/dma/ioat.c
+++ b/drivers/dma/ioat.c
@@ -1,6 +1,6 @@
 /*
  * Intel I/OAT DMA Linux driver
- * Copyright(c) 2007 Intel Corporation.
+ * Copyright(c) 2007 - 2009 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
diff --git a/drivers/dma/ioat_dca.c b/drivers/dma/ioat_dca.c
index 6cf622d..c012a1e 100644
--- a/drivers/dma/ioat_dca.c
+++ b/drivers/dma/ioat_dca.c
@@ -1,6 +1,6 @@
 /*
  * Intel I/OAT DMA Linux driver
- * Copyright(c) 2007 Intel Corporation.
+ * Copyright(c) 2007 - 2009 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -49,6 +49,23 @@
 
 #define DCA_TAG_MAP_MASK 0xDF
 
+/* expected tag map bytes for I/OAT ver.2 */
+#define DCA2_TAG_MAP_BYTE0 0x80
+#define DCA2_TAG_MAP_BYTE1 0x0
+#define DCA2_TAG_MAP_BYTE2 0x81
+#define DCA2_TAG_MAP_BYTE3 0x82
+#define DCA2_TAG_MAP_BYTE4 0x82
+
+/* verify if tag map matches expected values */
+static inline int dca2_tag_map_valid(u8 *tag_map)
+{
+	return ((tag_map[0] == DCA2_TAG_MAP_BYTE0) &&
+		(tag_map[1] == DCA2_TAG_MAP_BYTE1) &&
+		(tag_map[2] == DCA2_TAG_MAP_BYTE2) &&
+		(tag_map[3] == DCA2_TAG_MAP_BYTE3) &&
+		(tag_map[4] == DCA2_TAG_MAP_BYTE4));
+}
+
 /*
  * "Legacy" DCA systems do not implement the DCA register set in the
  * I/OAT device.  Software needs direct support for their tag mappings.
@@ -452,6 +469,13 @@
 			ioatdca->tag_map[i] = 0;
 	}
 
+	if (!dca2_tag_map_valid(ioatdca->tag_map)) {
+		dev_err(&pdev->dev, "APICID_TAG_MAP set incorrectly by BIOS, "
+			"disabling DCA\n");
+		free_dca_provider(dca);
+		return NULL;
+	}
+
 	err = register_dca_provider(dca, &pdev->dev);
 	if (err) {
 		free_dca_provider(dca);
diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index b3759c4..5905cd3 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -1,6 +1,6 @@
 /*
  * Intel I/OAT DMA Linux driver
- * Copyright(c) 2004 - 2007 Intel Corporation.
+ * Copyright(c) 2004 - 2009 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -189,11 +189,13 @@
 		ioat_chan->xfercap = xfercap;
 		ioat_chan->desccount = 0;
 		INIT_DELAYED_WORK(&ioat_chan->work, ioat_dma_chan_reset_part2);
-		if (ioat_chan->device->version != IOAT_VER_1_2) {
-			writel(IOAT_DCACTRL_CMPL_WRITE_ENABLE
-					| IOAT_DMA_DCA_ANY_CPU,
-				ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
-		}
+		if (ioat_chan->device->version == IOAT_VER_2_0)
+			writel(IOAT_DCACTRL_CMPL_WRITE_ENABLE |
+			       IOAT_DMA_DCA_ANY_CPU,
+			       ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
+		else if (ioat_chan->device->version == IOAT_VER_3_0)
+			writel(IOAT_DMA_DCA_ANY_CPU,
+			       ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
 		spin_lock_init(&ioat_chan->cleanup_lock);
 		spin_lock_init(&ioat_chan->desc_lock);
 		INIT_LIST_HEAD(&ioat_chan->free_desc);
@@ -1169,9 +1171,8 @@
 				 * up if the client is done with the descriptor
 				 */
 				if (async_tx_test_ack(&desc->async_tx)) {
-					list_del(&desc->node);
-					list_add_tail(&desc->node,
-						      &ioat_chan->free_desc);
+					list_move_tail(&desc->node,
+						       &ioat_chan->free_desc);
 				} else
 					desc->async_tx.cookie = 0;
 			} else {
@@ -1362,6 +1363,7 @@
 	dma_cookie_t cookie;
 	int err = 0;
 	struct completion cmp;
+	unsigned long tmo;
 
 	src = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL);
 	if (!src)
@@ -1413,9 +1415,10 @@
 	}
 	device->common.device_issue_pending(dma_chan);
 
-	wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
+	tmo = wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
 
-	if (device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
+	if (tmo == 0 ||
+	    device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
 					!= DMA_SUCCESS) {
 		dev_err(&device->pdev->dev,
 			"Self-test copy timed out, disabling\n");
@@ -1657,6 +1660,13 @@
 		" %d channels, device version 0x%02x, driver version %s\n",
 		device->common.chancnt, device->version, IOAT_DMA_VERSION);
 
+	if (!device->common.chancnt) {
+		dev_err(&device->pdev->dev,
+			"Intel(R) I/OAT DMA Engine problem found: "
+			"zero channels detected\n");
+		goto err_setup_interrupts;
+	}
+
 	err = ioat_dma_setup_interrupts(device);
 	if (err)
 		goto err_setup_interrupts;
@@ -1696,6 +1706,9 @@
 	struct dma_chan *chan, *_chan;
 	struct ioat_dma_chan *ioat_chan;
 
+	if (device->version != IOAT_VER_3_0)
+		cancel_delayed_work(&device->work);
+
 	ioat_dma_remove_interrupts(device);
 
 	dma_async_device_unregister(&device->common);
@@ -1707,10 +1720,6 @@
 	pci_release_regions(device->pdev);
 	pci_disable_device(device->pdev);
 
-	if (device->version != IOAT_VER_3_0) {
-		cancel_delayed_work(&device->work);
-	}
-
 	list_for_each_entry_safe(chan, _chan,
 				 &device->common.channels, device_node) {
 		ioat_chan = to_ioat_chan(chan);
diff --git a/drivers/dma/ioatdma.h b/drivers/dma/ioatdma.h
index a3306d0..a52ff4b 100644
--- a/drivers/dma/ioatdma.h
+++ b/drivers/dma/ioatdma.h
@@ -1,5 +1,5 @@
 /*
- * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
@@ -29,7 +29,7 @@
 #include <linux/pci_ids.h>
 #include <net/tcp.h>
 
-#define IOAT_DMA_VERSION  "3.30"
+#define IOAT_DMA_VERSION  "3.64"
 
 enum ioat_interrupt {
 	none = 0,
@@ -135,12 +135,14 @@
 	#ifdef CONFIG_NET_DMA
 	switch (dev->version) {
 	case IOAT_VER_1_2:
-	case IOAT_VER_3_0:
 		sysctl_tcp_dma_copybreak = 4096;
 		break;
 	case IOAT_VER_2_0:
 		sysctl_tcp_dma_copybreak = 2048;
 		break;
+	case IOAT_VER_3_0:
+		sysctl_tcp_dma_copybreak = 262144;
+		break;
 	}
 	#endif
 }
diff --git a/drivers/dma/ioatdma_hw.h b/drivers/dma/ioatdma_hw.h
index f1ae2c7..afa57ee 100644
--- a/drivers/dma/ioatdma_hw.h
+++ b/drivers/dma/ioatdma_hw.h
@@ -1,5 +1,5 @@
 /*
- * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/dma/ioatdma_registers.h b/drivers/dma/ioatdma_registers.h
index 827cb50..49bc277 100644
--- a/drivers/dma/ioatdma_registers.h
+++ b/drivers/dma/ioatdma_registers.h
@@ -1,5 +1,5 @@
 /*
- * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index ea5440d..16adbe6 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -928,19 +928,19 @@
 
 	for (src_idx = 0; src_idx < IOP_ADMA_NUM_SRC_TEST; src_idx++) {
 		xor_srcs[src_idx] = alloc_page(GFP_KERNEL);
-		if (!xor_srcs[src_idx])
-			while (src_idx--) {
+		if (!xor_srcs[src_idx]) {
+			while (src_idx--)
 				__free_page(xor_srcs[src_idx]);
-				return -ENOMEM;
-			}
+			return -ENOMEM;
+		}
 	}
 
 	dest = alloc_page(GFP_KERNEL);
-	if (!dest)
-		while (src_idx--) {
+	if (!dest) {
+		while (src_idx--)
 			__free_page(xor_srcs[src_idx]);
-			return -ENOMEM;
-		}
+		return -ENOMEM;
+	}
 
 	/* Fill in src buffers */
 	for (src_idx = 0; src_idx < IOP_ADMA_NUM_SRC_TEST; src_idx++) {
@@ -1401,7 +1401,7 @@
 
 static struct platform_driver iop_adma_driver = {
 	.probe		= iop_adma_probe,
-	.remove		= iop_adma_remove,
+	.remove		= __devexit_p(iop_adma_remove),
 	.driver		= {
 		.owner	= THIS_MODULE,
 		.name	= "iop-adma",
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index 1f154d0..ae50a9d 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -729,7 +729,7 @@
 
 	ichan->status = IPU_CHANNEL_READY;
 
-	spin_unlock_irqrestore(ipu->lock, flags);
+	spin_unlock_irqrestore(&ipu->lock, flags);
 
 	return 0;
 }
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index d35cbd1..cb7f26f 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -1019,19 +1019,19 @@
 
 	for (src_idx = 0; src_idx < MV_XOR_NUM_SRC_TEST; src_idx++) {
 		xor_srcs[src_idx] = alloc_page(GFP_KERNEL);
-		if (!xor_srcs[src_idx])
-			while (src_idx--) {
+		if (!xor_srcs[src_idx]) {
+			while (src_idx--)
 				__free_page(xor_srcs[src_idx]);
-				return -ENOMEM;
-			}
+			return -ENOMEM;
+		}
 	}
 
 	dest = alloc_page(GFP_KERNEL);
-	if (!dest)
-		while (src_idx--) {
+	if (!dest) {
+		while (src_idx--)
 			__free_page(xor_srcs[src_idx]);
-			return -ENOMEM;
-		}
+		return -ENOMEM;
+	}
 
 	/* Fill in src buffers */
 	for (src_idx = 0; src_idx < MV_XOR_NUM_SRC_TEST; src_idx++) {
@@ -1287,7 +1287,7 @@
 
 static struct platform_driver mv_xor_driver = {
 	.probe		= mv_xor_probe,
-	.remove		= mv_xor_remove,
+	.remove		= __devexit_p(mv_xor_remove),
 	.driver		= {
 		.owner	= THIS_MODULE,
 		.name	= MV_XOR_NAME,
diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c
index 72c667f..12715d3 100644
--- a/drivers/gpu/drm/drm_bufs.c
+++ b/drivers/gpu/drm/drm_bufs.c
@@ -420,7 +420,7 @@
 				dev->sigdata.lock = NULL;
 			master->lock.hw_lock = NULL;   /* SHM removed */
 			master->lock.file_priv = NULL;
-			wake_up_interruptible(&master->lock.lock_queue);
+			wake_up_interruptible_all(&master->lock.lock_queue);
 		}
 		break;
 	case _DRM_AGP:
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index 733028b..1c3a8c5 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -452,6 +452,59 @@
 	kfree(modes);
 	kfree(enabled);
 }
+
+/**
+ * drm_encoder_crtc_ok - can a given crtc drive a given encoder?
+ * @encoder: encoder to test
+ * @crtc: crtc to test
+ *
+ * Return false if @encoder can't be driven by @crtc, true otherwise.
+ */
+static bool drm_encoder_crtc_ok(struct drm_encoder *encoder,
+				struct drm_crtc *crtc)
+{
+	struct drm_device *dev;
+	struct drm_crtc *tmp;
+	int crtc_mask = 1;
+
+	WARN(!crtc, "checking null crtc?");
+
+	dev = crtc->dev;
+
+	list_for_each_entry(tmp, &dev->mode_config.crtc_list, head) {
+		if (tmp == crtc)
+			break;
+		crtc_mask <<= 1;
+	}
+
+	if (encoder->possible_crtcs & crtc_mask)
+		return true;
+	return false;
+}
+
+/*
+ * Check the CRTC we're going to map each output to vs. its current
+ * CRTC.  If they don't match, we have to disable the output and the CRTC
+ * since the driver will have to re-route things.
+ */
+static void
+drm_crtc_prepare_encoders(struct drm_device *dev)
+{
+	struct drm_encoder_helper_funcs *encoder_funcs;
+	struct drm_encoder *encoder;
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		encoder_funcs = encoder->helper_private;
+		/* Disable unused encoders */
+		if (encoder->crtc == NULL)
+			(*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
+		/* Disable encoders whose CRTC is about to change */
+		if (encoder_funcs->get_crtc &&
+		    encoder->crtc != (*encoder_funcs->get_crtc)(encoder))
+			(*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
+	}
+}
+
 /**
  * drm_crtc_set_mode - set a mode
  * @crtc: CRTC to program
@@ -547,6 +600,8 @@
 		encoder_funcs->prepare(encoder);
 	}
 
+	drm_crtc_prepare_encoders(dev);
+
 	crtc_funcs->prepare(crtc);
 
 	/* Set up the DPLL and any encoders state that needs to adjust or depend
@@ -617,7 +672,7 @@
 	struct drm_device *dev;
 	struct drm_crtc **save_crtcs, *new_crtc;
 	struct drm_encoder **save_encoders, *new_encoder;
-	struct drm_framebuffer *old_fb;
+	struct drm_framebuffer *old_fb = NULL;
 	bool save_enabled;
 	bool mode_changed = false;
 	bool fb_changed = false;
@@ -668,9 +723,10 @@
 	 * and then just flip_or_move it */
 	if (set->crtc->fb != set->fb) {
 		/* If we have no fb then treat it as a full mode set */
-		if (set->crtc->fb == NULL)
+		if (set->crtc->fb == NULL) {
+			DRM_DEBUG("crtc has no fb, full mode set\n");
 			mode_changed = true;
-		else if ((set->fb->bits_per_pixel !=
+		} else if ((set->fb->bits_per_pixel !=
 			 set->crtc->fb->bits_per_pixel) ||
 			 set->fb->depth != set->crtc->fb->depth)
 			fb_changed = true;
@@ -682,7 +738,7 @@
 		fb_changed = true;
 
 	if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
-		DRM_DEBUG("modes are different\n");
+		DRM_DEBUG("modes are different, full mode set\n");
 		drm_mode_debug_printmodeline(&set->crtc->mode);
 		drm_mode_debug_printmodeline(set->mode);
 		mode_changed = true;
@@ -708,6 +764,7 @@
 		}
 
 		if (new_encoder != connector->encoder) {
+			DRM_DEBUG("encoder changed, full mode switch\n");
 			mode_changed = true;
 			connector->encoder = new_encoder;
 		}
@@ -734,10 +791,20 @@
 			if (set->connectors[ro] == connector)
 				new_crtc = set->crtc;
 		}
+
+		/* Make sure the new CRTC will work with the encoder */
+		if (new_crtc &&
+		    !drm_encoder_crtc_ok(connector->encoder, new_crtc)) {
+			ret = -EINVAL;
+			goto fail_set_mode;
+		}
 		if (new_crtc != connector->encoder->crtc) {
+			DRM_DEBUG("crtc changed, full mode switch\n");
 			mode_changed = true;
 			connector->encoder->crtc = new_crtc;
 		}
+		DRM_DEBUG("setting connector %d crtc to %p\n",
+			  connector->base.id, new_crtc);
 	}
 
 	/* mode_set_base is not a required function */
@@ -781,6 +848,7 @@
 
 fail_set_mode:
 	set->crtc->enabled = save_enabled;
+	set->crtc->fb = old_fb;
 	count = 0;
 	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 		if (!connector->encoder)
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 5a4d324..a839a28 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -125,7 +125,7 @@
 		DRM_ERROR("EDID has major version %d, instead of 1\n", edid->version);
 		goto bad;
 	}
-	if (edid->revision <= 0 || edid->revision > 3) {
+	if (edid->revision > 3) {
 		DRM_ERROR("EDID has minor version %d, which is not between 0-3\n", edid->revision);
 		goto bad;
 	}
@@ -320,10 +320,10 @@
 	mode->htotal = mode->hdisplay + ((pt->hblank_hi << 8) | pt->hblank_lo);
 
 	mode->vdisplay = (pt->vactive_hi << 8) | pt->vactive_lo;
-	mode->vsync_start = mode->vdisplay + ((pt->vsync_offset_hi << 8) |
+	mode->vsync_start = mode->vdisplay + ((pt->vsync_offset_hi << 4) |
 					      pt->vsync_offset_lo);
 	mode->vsync_end = mode->vsync_start +
-		((pt->vsync_pulse_width_hi << 8) |
+		((pt->vsync_pulse_width_hi << 4) |
 		 pt->vsync_pulse_width_lo);
 	mode->vtotal = mode->vdisplay + ((pt->vblank_hi << 8) | pt->vblank_lo);
 
diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c
index 6c020fe..f52663e 100644
--- a/drivers/gpu/drm/drm_fops.c
+++ b/drivers/gpu/drm/drm_fops.c
@@ -484,6 +484,7 @@
 	mutex_lock(&dev->struct_mutex);
 
 	if (file_priv->is_master) {
+		struct drm_master *master = file_priv->master;
 		struct drm_file *temp;
 		list_for_each_entry(temp, &dev->filelist, lhead) {
 			if ((temp->master == file_priv->master) &&
@@ -491,6 +492,19 @@
 				temp->authenticated = 0;
 		}
 
+		/**
+		 * Since the master is disappearing, so is the
+		 * possibility to lock.
+		 */
+
+		if (master->lock.hw_lock) {
+			if (dev->sigdata.lock == master->lock.hw_lock)
+				dev->sigdata.lock = NULL;
+			master->lock.hw_lock = NULL;
+			master->lock.file_priv = NULL;
+			wake_up_interruptible_all(&master->lock.lock_queue);
+		}
+
 		if (file_priv->minor->master == file_priv->master) {
 			/* drop the reference held my the minor */
 			drm_master_put(&file_priv->minor->master);
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 3795dbc..93e677a 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -435,6 +435,8 @@
  */
 void drm_vblank_put(struct drm_device *dev, int crtc)
 {
+	BUG_ON (atomic_read (&dev->vblank_refcount[crtc]) == 0);
+
 	/* Last user schedules interrupt disable */
 	if (atomic_dec_and_test(&dev->vblank_refcount[crtc]))
 		mod_timer(&dev->vblank_disable_timer, jiffies + 5*DRM_HZ);
@@ -460,8 +462,9 @@
 	 * so that interrupts remain enabled in the interim.
 	 */
 	if (!dev->vblank_inmodeset[crtc]) {
-		dev->vblank_inmodeset[crtc] = 1;
-		drm_vblank_get(dev, crtc);
+		dev->vblank_inmodeset[crtc] = 0x1;
+		if (drm_vblank_get(dev, crtc) == 0)
+			dev->vblank_inmodeset[crtc] |= 0x2;
 	}
 }
 EXPORT_SYMBOL(drm_vblank_pre_modeset);
@@ -473,9 +476,12 @@
 	if (dev->vblank_inmodeset[crtc]) {
 		spin_lock_irqsave(&dev->vbl_lock, irqflags);
 		dev->vblank_disable_allowed = 1;
-		dev->vblank_inmodeset[crtc] = 0;
 		spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
-		drm_vblank_put(dev, crtc);
+
+		if (dev->vblank_inmodeset[crtc] & 0x2)
+			drm_vblank_put(dev, crtc);
+
+		dev->vblank_inmodeset[crtc] = 0;
 	}
 }
 EXPORT_SYMBOL(drm_vblank_post_modeset);
diff --git a/drivers/gpu/drm/drm_lock.c b/drivers/gpu/drm/drm_lock.c
index 46e7b28..e2f70a5 100644
--- a/drivers/gpu/drm/drm_lock.c
+++ b/drivers/gpu/drm/drm_lock.c
@@ -80,6 +80,7 @@
 		__set_current_state(TASK_INTERRUPTIBLE);
 		if (!master->lock.hw_lock) {
 			/* Device has been unregistered */
+			send_sig(SIGTERM, current, 0);
 			ret = -EINTR;
 			break;
 		}
@@ -93,7 +94,7 @@
 		/* Contention */
 		schedule();
 		if (signal_pending(current)) {
-			ret = -ERESTARTSYS;
+			ret = -EINTR;
 			break;
 		}
 	}
diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index 46bb923..7c8b15b 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -146,14 +146,6 @@
 
 	drm_ht_remove(&master->magiclist);
 
-	if (master->lock.hw_lock) {
-		if (dev->sigdata.lock == master->lock.hw_lock)
-			dev->sigdata.lock = NULL;
-		master->lock.hw_lock = NULL;
-		master->lock.file_priv = NULL;
-		wake_up_interruptible(&master->lock.lock_queue);
-	}
-
 	drm_free(master, sizeof(*master), DRM_MEM_DRIVER);
 }
 
@@ -176,7 +168,7 @@
 	    file_priv->minor->master != file_priv->master) {
 		mutex_lock(&dev->struct_mutex);
 		file_priv->minor->master = drm_master_get(file_priv->master);
-		mutex_lock(&dev->struct_mutex);
+		mutex_unlock(&dev->struct_mutex);
 	}
 
 	return 0;
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 2d797ff..6d21b9e 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -811,7 +811,7 @@
 	dev_priv->hws_map.flags = 0;
 	dev_priv->hws_map.mtrr = 0;
 
-	drm_core_ioremap(&dev_priv->hws_map, dev);
+	drm_core_ioremap_wc(&dev_priv->hws_map, dev);
 	if (dev_priv->hws_map.handle == NULL) {
 		i915_dma_cleanup(dev);
 		dev_priv->status_gfx_addr = 0;
@@ -1090,6 +1090,11 @@
         dev_priv->mm.gtt_mapping =
 		io_mapping_create_wc(dev->agp->base,
 				     dev->agp->agp_info.aper_size * 1024*1024);
+	if (dev_priv->mm.gtt_mapping == NULL) {
+		ret = -EIO;
+		goto out_rmmap;
+	}
+
 	/* Set up a WC MTRR for non-PAT systems.  This is more common than
 	 * one would think, because the kernel disables PAT on first
 	 * generation Core chips because WC PAT gets overridden by a UC
@@ -1100,7 +1105,7 @@
 					 1024 * 1024,
 					 MTRR_TYPE_WRCOMB, 1);
 	if (dev_priv->mm.gtt_mtrr < 0) {
-		DRM_INFO("MTRR allocation failed\n.  Graphics "
+		DRM_INFO("MTRR allocation failed.  Graphics "
 			 "performance may suffer.\n");
 	}
 
@@ -1122,7 +1127,7 @@
 	if (!I915_NEED_GFX_HWS(dev)) {
 		ret = i915_init_phys_hws(dev);
 		if (ret != 0)
-			goto out_rmmap;
+			goto out_iomapfree;
 	}
 
 	/* On the 945G/GM, the chipset reports the MSI capability on the
@@ -1161,6 +1166,8 @@
 
 	return 0;
 
+out_iomapfree:
+	io_mapping_free(dev_priv->mm.gtt_mapping);
 out_rmmap:
 	iounmap(dev_priv->regs);
 free_priv:
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 17fa408..d6cc986 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -279,7 +279,6 @@
 	u8 saveAR_INDEX;
 	u8 saveAR[21];
 	u8 saveDACMASK;
-	u8 saveDACDATA[256*3]; /* 256 3-byte colors */
 	u8 saveCR[37];
 
 	struct {
@@ -457,6 +456,12 @@
 
 	/** for phy allocated objects */
 	struct drm_i915_gem_phys_object *phys_obj;
+
+	/**
+	 * Used for checking the object doesn't appear more than once
+	 * in an execbuffer object list.
+	 */
+	int in_execbuffer;
 };
 
 /**
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 28b726d..37427e4 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1476,7 +1476,7 @@
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
 	int regnum = obj_priv->fence_reg;
 	int tile_width;
-	uint32_t val;
+	uint32_t fence_reg, val;
 	uint32_t pitch_val;
 
 	if ((obj_priv->gtt_offset & ~I915_FENCE_START_MASK) ||
@@ -1503,7 +1503,11 @@
 	val |= pitch_val << I830_FENCE_PITCH_SHIFT;
 	val |= I830_FENCE_REG_VALID;
 
-	I915_WRITE(FENCE_REG_830_0 + (regnum * 4), val);
+	if (regnum < 8)
+		fence_reg = FENCE_REG_830_0 + (regnum * 4);
+	else
+		fence_reg = FENCE_REG_945_8 + ((regnum - 8) * 4);
+	I915_WRITE(fence_reg, val);
 }
 
 static void i830_write_fence_reg(struct drm_i915_fence_reg *reg)
@@ -1557,7 +1561,8 @@
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
 	struct drm_i915_fence_reg *reg = NULL;
-	int i, ret;
+	struct drm_i915_gem_object *old_obj_priv = NULL;
+	int i, ret, avail;
 
 	switch (obj_priv->tiling_mode) {
 	case I915_TILING_NONE:
@@ -1580,25 +1585,46 @@
 	}
 
 	/* First try to find a free reg */
+try_again:
+	avail = 0;
 	for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) {
 		reg = &dev_priv->fence_regs[i];
 		if (!reg->obj)
 			break;
+
+		old_obj_priv = reg->obj->driver_private;
+		if (!old_obj_priv->pin_count)
+		    avail++;
 	}
 
 	/* None available, try to steal one or wait for a user to finish */
 	if (i == dev_priv->num_fence_regs) {
-		struct drm_i915_gem_object *old_obj_priv = NULL;
+		uint32_t seqno = dev_priv->mm.next_gem_seqno;
 		loff_t offset;
 
-try_again:
-		/* Could try to use LRU here instead... */
+		if (avail == 0)
+			return -ENOMEM;
+
 		for (i = dev_priv->fence_reg_start;
 		     i < dev_priv->num_fence_regs; i++) {
+			uint32_t this_seqno;
+
 			reg = &dev_priv->fence_regs[i];
 			old_obj_priv = reg->obj->driver_private;
-			if (!old_obj_priv->pin_count)
+
+			if (old_obj_priv->pin_count)
+				continue;
+
+			/* i915 uses fences for GPU access to tiled buffers */
+			if (IS_I965G(dev) || !old_obj_priv->active)
 				break;
+
+			/* find the seqno of the first available fence */
+			this_seqno = old_obj_priv->last_rendering_seqno;
+			if (this_seqno != 0 &&
+			    reg->obj->write_domain == 0 &&
+			    i915_seqno_passed(seqno, this_seqno))
+				seqno = this_seqno;
 		}
 
 		/*
@@ -1606,15 +1632,25 @@
 		 * objects to finish before trying again.
 		 */
 		if (i == dev_priv->num_fence_regs) {
-			ret = i915_gem_object_set_to_gtt_domain(reg->obj, 0);
-			if (ret) {
-				WARN(ret != -ERESTARTSYS,
-				     "switch to GTT domain failed: %d\n", ret);
-				return ret;
+			if (seqno == dev_priv->mm.next_gem_seqno) {
+				i915_gem_flush(dev,
+					       I915_GEM_GPU_DOMAINS,
+					       I915_GEM_GPU_DOMAINS);
+				seqno = i915_add_request(dev,
+							 I915_GEM_GPU_DOMAINS);
+				if (seqno == 0)
+					return -ENOMEM;
 			}
+
+			ret = i915_wait_request(dev, seqno);
+			if (ret)
+				return ret;
 			goto try_again;
 		}
 
+		BUG_ON(old_obj_priv->active ||
+		       (reg->obj->write_domain & I915_GEM_GPU_DOMAINS));
+
 		/*
 		 * Zap this virtual mapping so we can set up a fence again
 		 * for this object next time we need it.
@@ -1655,8 +1691,17 @@
 
 	if (IS_I965G(dev))
 		I915_WRITE64(FENCE_REG_965_0 + (obj_priv->fence_reg * 8), 0);
-	else
-		I915_WRITE(FENCE_REG_830_0 + (obj_priv->fence_reg * 4), 0);
+	else {
+		uint32_t fence_reg;
+
+		if (obj_priv->fence_reg < 8)
+			fence_reg = FENCE_REG_830_0 + obj_priv->fence_reg * 4;
+		else
+			fence_reg = FENCE_REG_945_8 + (obj_priv->fence_reg -
+						       8) * 4;
+
+		I915_WRITE(fence_reg, 0);
+	}
 
 	dev_priv->fence_regs[obj_priv->fence_reg].obj = NULL;
 	obj_priv->fence_reg = I915_FENCE_REG_NONE;
@@ -2469,6 +2514,7 @@
 	struct drm_i915_gem_exec_object *exec_list = NULL;
 	struct drm_gem_object **object_list = NULL;
 	struct drm_gem_object *batch_obj;
+	struct drm_i915_gem_object *obj_priv;
 	int ret, i, pinned = 0;
 	uint64_t exec_offset;
 	uint32_t seqno, flush_domains;
@@ -2533,6 +2579,15 @@
 			ret = -EBADF;
 			goto err;
 		}
+
+		obj_priv = object_list[i]->driver_private;
+		if (obj_priv->in_execbuffer) {
+			DRM_ERROR("Object %p appears more than once in object list\n",
+				   object_list[i]);
+			ret = -EBADF;
+			goto err;
+		}
+		obj_priv->in_execbuffer = true;
 	}
 
 	/* Pin and relocate */
@@ -2674,8 +2729,13 @@
 	for (i = 0; i < pinned; i++)
 		i915_gem_object_unpin(object_list[i]);
 
-	for (i = 0; i < args->buffer_count; i++)
+	for (i = 0; i < args->buffer_count; i++) {
+		if (object_list[i]) {
+			obj_priv = object_list[i]->driver_private;
+			obj_priv->in_execbuffer = false;
+		}
 		drm_gem_object_unreference(object_list[i]);
+	}
 
 	mutex_unlock(&dev->struct_mutex);
 
@@ -2712,17 +2772,24 @@
 		ret = i915_gem_object_bind_to_gtt(obj, alignment);
 		if (ret != 0) {
 			if (ret != -EBUSY && ret != -ERESTARTSYS)
-				DRM_ERROR("Failure to bind: %d", ret);
+				DRM_ERROR("Failure to bind: %d\n", ret);
 			return ret;
 		}
-		/*
-		 * Pre-965 chips need a fence register set up in order to
-		 * properly handle tiled surfaces.
-		 */
-		if (!IS_I965G(dev) &&
-		    obj_priv->fence_reg == I915_FENCE_REG_NONE &&
-		    obj_priv->tiling_mode != I915_TILING_NONE)
-			i915_gem_object_get_fence_reg(obj, true);
+	}
+	/*
+	 * Pre-965 chips need a fence register set up in order to
+	 * properly handle tiled surfaces.
+	 */
+	if (!IS_I965G(dev) &&
+	    obj_priv->fence_reg == I915_FENCE_REG_NONE &&
+	    obj_priv->tiling_mode != I915_TILING_NONE) {
+		ret = i915_gem_object_get_fence_reg(obj, true);
+		if (ret != 0) {
+			if (ret != -EBUSY && ret != -ERESTARTSYS)
+				DRM_ERROR("Failure to install fence: %d\n",
+					  ret);
+			return ret;
+		}
 	}
 	obj_priv->pin_count++;
 
@@ -3548,7 +3615,7 @@
 	user_data = (char __user *) (uintptr_t) args->data_ptr;
 	obj_addr = obj_priv->phys_obj->handle->vaddr + args->offset;
 
-	DRM_ERROR("obj_addr %p, %lld\n", obj_addr, args->size);
+	DRM_DEBUG("obj_addr %p, %lld\n", obj_addr, args->size);
 	ret = copy_from_user(obj_addr, user_data, args->size);
 	if (ret)
 		return -EFAULT;
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 548ff2c..87b6b60 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -383,12 +383,13 @@
 	drm_i915_irq_emit_t *emit = data;
 	int result;
 
-	RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
-
 	if (!dev_priv) {
 		DRM_ERROR("called with no initialization\n");
 		return -EINVAL;
 	}
+
+	RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
+
 	mutex_lock(&dev->struct_mutex);
 	result = i915_emit_irq(dev);
 	mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 9d6539a..90600d8 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -184,6 +184,7 @@
  * Fence registers
  */
 #define FENCE_REG_830_0			0x2000
+#define FENCE_REG_945_8			0x3000
 #define   I830_FENCE_START_MASK		0x07f80000
 #define   I830_FENCE_TILING_Y_SHIFT	12
 #define   I830_FENCE_SIZE_BITS(size)	((ffs((size) >> 19) - 1) << 8)
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 5d84027..d669cc2 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -119,11 +119,6 @@
 
 	/* VGA color palette registers */
 	dev_priv->saveDACMASK = I915_READ8(VGA_DACMASK);
-	/* DACCRX automatically increments during read */
-	I915_WRITE8(VGA_DACRX, 0);
-	/* Read 3 bytes of color data from each index */
-	for (i = 0; i < 256 * 3; i++)
-		dev_priv->saveDACDATA[i] = I915_READ8(VGA_DACDATA);
 
 	/* MSR bits */
 	dev_priv->saveMSR = I915_READ8(VGA_MSR_READ);
@@ -225,12 +220,6 @@
 
 	/* VGA color palette registers */
 	I915_WRITE8(VGA_DACMASK, dev_priv->saveDACMASK);
-	/* DACCRX automatically increments during read */
-	I915_WRITE8(VGA_DACWX, 0);
-	/* Read 3 bytes of color data from each index */
-	for (i = 0; i < 256 * 3; i++)
-		I915_WRITE8(VGA_DACDATA, dev_priv->saveDACDATA[i]);
-
 }
 
 int i915_save_state(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 65be30d..fc28e2b 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -111,6 +111,12 @@
 	panel_fixed_mode->clock = dvo_timing->clock * 10;
 	panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
 
+	/* Some VBTs have bogus h/vtotal values */
+	if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal)
+		panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1;
+	if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal)
+		panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1;
+
 	drm_mode_set_name(panel_fixed_mode);
 
 	dev_priv->vbt_mode = panel_fixed_mode;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 65b635c..a283427 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -217,7 +217,7 @@
     return false;
 }
 
-#define INTELPllInvalid(s)   do { DRM_DEBUG(s); return false; } while (0)
+#define INTELPllInvalid(s)   do { /* DRM_DEBUG(s); */ return false; } while (0)
 /**
  * Returns whether the given set of divisors are valid for a given refclk with
  * the given connectors.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index b84bf06..b4eea02 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -543,8 +543,8 @@
 	help
 	  If you say yes here you get support for National Semiconductor LM90,
 	  LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim
-	  MAX6646, MAX6647, MAX6649, MAX6657, MAX6658, MAX6659, MAX6680 and
-	  MAX6681 sensor chips.
+	  MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
+	  MAX6680, MAX6681 and MAX6692 sensor chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm90.
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index e52b388..ad2b343 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -760,8 +760,11 @@
 
 	for (i = 0; i < offset_count; i++)
 		if ((x = abituguru3_read(data, bank, offset + i, count,
-				buf + i * count)) != count)
-			return i * count + (i && (x < 0)) ? 0 : x;
+				buf + i * count)) != count) {
+			if (x < 0)
+				return x;
+			return i * count + x;
+		}
 
 	return i * count;
 }
diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index 1692de3..18a1ba8 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -617,7 +617,7 @@
 static int f75375_probe(struct i2c_client *client,
 		const struct i2c_device_id *id)
 {
-	struct f75375_data *data = i2c_get_clientdata(client);
+	struct f75375_data *data;
 	struct f75375s_platform_data *f75375s_pdata = client->dev.platform_data;
 	int err;
 
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 95a99c5..9157247 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -213,7 +213,7 @@
 
 #define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-500)/1000):\
 					((val)+500)/1000),-128,127))
-#define TEMP_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*1000)
+#define TEMP_FROM_REG(val) ((val) * 1000)
 
 #define PWM_TO_REG(val)   ((val) >> 1)
 #define PWM_FROM_REG(val) (((val)&0x7f) << 1)
@@ -267,9 +267,9 @@
 	u8 has_fan;		/* Bitfield, fans enabled */
 	u16 fan[5];		/* Register values, possibly combined */
 	u16 fan_min[5];		/* Register values, possibly combined */
-	u8 temp[3];		/* Register value */
-	u8 temp_high[3];	/* Register value */
-	u8 temp_low[3];		/* Register value */
+	s8 temp[3];		/* Register value */
+	s8 temp_high[3];	/* Register value */
+	s8 temp_low[3];		/* Register value */
 	u8 sensor;		/* Register value */
 	u8 fan_div[3];		/* Register encoding, shifted right */
 	u8 vid;			/* Register encoding, combined */
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index cfc1ee9..b251d86 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -72,6 +72,7 @@
 #define	LM85_COMPANY_SMSC		0x5c
 #define	LM85_VERSTEP_VMASK              0xf0
 #define	LM85_VERSTEP_GENERIC		0x60
+#define	LM85_VERSTEP_GENERIC2		0x70
 #define	LM85_VERSTEP_LM85C		0x60
 #define	LM85_VERSTEP_LM85B		0x62
 #define	LM85_VERSTEP_ADM1027		0x60
@@ -334,6 +335,7 @@
 static const struct i2c_device_id lm85_id[] = {
 	{ "adm1027", adm1027 },
 	{ "adt7463", adt7463 },
+	{ "adt7468", adt7468 },
 	{ "lm85", any_chip },
 	{ "lm85b", lm85b },
 	{ "lm85c", lm85c },
@@ -408,7 +410,8 @@
 	struct lm85_data *data = lm85_update_device(dev);
 	int vid;
 
-	if (data->type == adt7463 && (data->vid & 0x80)) {
+	if ((data->type == adt7463 || data->type == adt7468) &&
+	    (data->vid & 0x80)) {
 		/* 6-pin VID (VRM 10) */
 		vid = vid_from_reg(data->vid & 0x3f, data->vrm);
 	} else {
@@ -1153,7 +1156,8 @@
 			address, company, verstep);
 
 		/* All supported chips have the version in common */
-		if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC) {
+		if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC &&
+		    (verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC2) {
 			dev_dbg(&adapter->dev, "Autodetection failed: "
 				"unsupported version\n");
 			return -ENODEV;
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 96a7018..1aff757 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -32,10 +32,10 @@
  * supported by this driver. These chips lack the remote temperature
  * offset feature.
  *
- * This driver also supports the MAX6646, MAX6647 and MAX6649 chips
- * made by Maxim.  These are again similar to the LM86, but they use
- * unsigned temperature values and can report temperatures from 0 to
- * 145 degrees.
+ * This driver also supports the MAX6646, MAX6647, MAX6648, MAX6649 and
+ * MAX6692 chips made by Maxim.  These are again similar to the LM86,
+ * but they use unsigned temperature values and can report temperatures
+ * from 0 to 145 degrees.
  *
  * This driver also supports the MAX6680 and MAX6681, two other sensor
  * chips made by Maxim. These are quite similar to the other Maxim
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index eeda276f..7f186bb 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -482,7 +482,7 @@
 	return 0;
 }
 
-static void __devexit
+static void
 mv64xxx_i2c_unmap_regs(struct mv64xxx_i2c_data *drv_data)
 {
 	if (drv_data->reg_base) {
@@ -577,7 +577,7 @@
 
 static struct platform_driver mv64xxx_i2c_driver = {
 	.probe	= mv64xxx_i2c_probe,
-	.remove	= mv64xxx_i2c_remove,
+	.remove	= __devexit_p(mv64xxx_i2c_remove),
 	.driver	= {
 		.owner	= THIS_MODULE,
 		.name	= MV64XXX_I2C_CTLR_NAME,
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 3dad229..5ea3bfa 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -46,7 +46,7 @@
 	  SMART parameters from disk drives.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called ide.
+	  module will be called ide-core.ko.
 
 	  For further information, please read <file:Documentation/ide/ide.txt>.
 
@@ -721,6 +721,11 @@
 	depends on SOC_TX4939
 	select BLK_DEV_IDEDMA_SFF
 
+config BLK_DEV_IDE_AT91
+	tristate "Atmel AT91 (SAM9, CAP9, AT572D940HF) IDE support"
+	depends on ARM && ARCH_AT91 && !ARCH_AT91RM9200 && !ARCH_AT91X40
+	select IDE_TIMINGS
+
 config IDE_ARM
 	tristate "ARM IDE support"
 	depends on ARM && (ARCH_RPC || ARCH_SHARK)
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index d0e3d7d..1c326d9 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -116,3 +116,4 @@
 
 obj-$(CONFIG_BLK_DEV_IDE_TX4938)	+= tx4938ide.o
 obj-$(CONFIG_BLK_DEV_IDE_TX4939)	+= tx4939ide.o
+obj-$(CONFIG_BLK_DEV_IDE_AT91)		+= at91_ide.o
diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c
index 69660a4..77267c8 100644
--- a/drivers/ide/amd74xx.c
+++ b/drivers/ide/amd74xx.c
@@ -166,7 +166,7 @@
 	 * Check for broken FIFO support.
 	 */
 	if (dev->vendor == PCI_VENDOR_ID_AMD &&
-	    dev->vendor == PCI_DEVICE_ID_AMD_VIPER_7411)
+	    dev->device == PCI_DEVICE_ID_AMD_VIPER_7411)
 		t &= 0x0f;
 	else
 		t |= 0xf0;
diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c
new file mode 100644
index 0000000..1bb50f4
--- /dev/null
+++ b/drivers/ide/at91_ide.c
@@ -0,0 +1,467 @@
+/*
+ * IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory Controller
+ * with Compact Flash True IDE logic
+ *
+ * Copyright (c) 2008, 2009 Kelvatek Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/ide.h>
+#include <linux/platform_device.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9263.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9263_matrix.h>
+
+#define DRV_NAME "at91_ide"
+
+#define perr(fmt, args...) pr_err(DRV_NAME ": " fmt, ##args)
+#define pdbg(fmt, args...) pr_debug("%s " fmt, __func__, ##args)
+
+/*
+ * Access to IDE device is possible through EBI Static Memory Controller
+ * with Compact Flash logic. For details see EBI and SMC datasheet sections
+ * of any microcontroller from AT91SAM9 family.
+ *
+ * Within SMC chip select address space, lines A[23:21] distinguish Compact
+ * Flash modes (I/O, common memory, attribute memory, True IDE). IDE modes are:
+ *   0x00c0000 - True IDE
+ *   0x00e0000 - Alternate True IDE (Alt Status Register)
+ *
+ * On True IDE mode Task File and Data Register are mapped at the same address.
+ * To distinguish access between these two different bus data width is used:
+ * 8Bit for Task File, 16Bit for Data I/O.
+ *
+ * After initialization we do 8/16 bit flipping (changes in SMC MODE register)
+ * only inside IDE callback routines which are serialized by IDE layer,
+ * so no additional locking needed.
+ */
+
+#define TASK_FILE	0x00c00000
+#define ALT_MODE	0x00e00000
+#define REGS_SIZE	8
+
+#define enter_16bit(cs, mode) do {					\
+	mode = at91_sys_read(AT91_SMC_MODE(cs));			\
+	at91_sys_write(AT91_SMC_MODE(cs), mode | AT91_SMC_DBW_16);	\
+} while (0)
+
+#define leave_16bit(cs, mode) at91_sys_write(AT91_SMC_MODE(cs), mode);
+
+static void set_smc_timings(const u8 chipselect, const u16 cycle,
+			    const u16 setup, const u16 pulse,
+			    const u16 data_float, int use_iordy)
+{
+	unsigned long mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+			     AT91_SMC_BAT_SELECT;
+
+	/* disable or enable waiting for IORDY signal */
+	if (use_iordy)
+		mode |= AT91_SMC_EXNWMODE_READY;
+
+	/* add data float cycles if needed */
+	if (data_float)
+		mode |= AT91_SMC_TDF_(data_float);
+
+	at91_sys_write(AT91_SMC_MODE(chipselect), mode);
+
+	/* setup timings in SMC */
+	at91_sys_write(AT91_SMC_SETUP(chipselect), AT91_SMC_NWESETUP_(setup) |
+						   AT91_SMC_NCS_WRSETUP_(0) |
+						   AT91_SMC_NRDSETUP_(setup) |
+						   AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_PULSE(chipselect), AT91_SMC_NWEPULSE_(pulse) |
+						   AT91_SMC_NCS_WRPULSE_(cycle) |
+						   AT91_SMC_NRDPULSE_(pulse) |
+						   AT91_SMC_NCS_RDPULSE_(cycle));
+	at91_sys_write(AT91_SMC_CYCLE(chipselect), AT91_SMC_NWECYCLE_(cycle) |
+						   AT91_SMC_NRDCYCLE_(cycle));
+}
+
+static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
+{
+	u64 tmp = ns;
+
+	tmp *= mck_hz;
+	tmp += 1000*1000*1000 - 1; /* round up */
+	do_div(tmp, 1000*1000*1000);
+	return (unsigned int) tmp;
+}
+
+static void apply_timings(const u8 chipselect, const u8 pio,
+			  const struct ide_timing *timing, int use_iordy)
+{
+	unsigned int t0, t1, t2, t6z;
+	unsigned int cycle, setup, pulse, data_float;
+	unsigned int mck_hz;
+	struct clk *mck;
+
+	/* see table 22 of Compact Flash standard 4.1 for the meaning,
+	 * we do not stretch active (t2) time, so setup (t1) + hold time (th)
+	 * assure at least minimal recovery (t2i) time */
+	t0 = timing->cyc8b;
+	t1 = timing->setup;
+	t2 = timing->act8b;
+	t6z = (pio < 5) ? 30 : 20;
+
+	pdbg("t0=%u t1=%u t2=%u t6z=%u\n", t0, t1, t2, t6z);
+
+	mck = clk_get(NULL, "mck");
+	BUG_ON(IS_ERR(mck));
+	mck_hz = clk_get_rate(mck);
+	pdbg("mck_hz=%u\n", mck_hz);
+
+	cycle = calc_mck_cycles(t0, mck_hz);
+	setup = calc_mck_cycles(t1, mck_hz);
+	pulse = calc_mck_cycles(t2, mck_hz);
+	data_float = calc_mck_cycles(t6z, mck_hz);
+
+	pdbg("cycle=%u setup=%u pulse=%u data_float=%u\n",
+	     cycle, setup, pulse, data_float);
+
+	set_smc_timings(chipselect, cycle, setup, pulse, data_float, use_iordy);
+}
+
+static void at91_ide_input_data(ide_drive_t *drive, struct request *rq,
+				void *buf, unsigned int len)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	u8 chipselect = hwif->select_data;
+	unsigned long mode;
+
+	pdbg("cs %u buf %p len %d\n", chipselect, buf, len);
+
+	len++;
+
+	enter_16bit(chipselect, mode);
+	__ide_mm_insw((void __iomem *) io_ports->data_addr, buf, len / 2);
+	leave_16bit(chipselect, mode);
+}
+
+static void at91_ide_output_data(ide_drive_t *drive, struct request *rq,
+				 void *buf, unsigned int len)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	u8 chipselect = hwif->select_data;
+	unsigned long mode;
+
+	pdbg("cs %u buf %p len %d\n", chipselect,  buf, len);
+
+	enter_16bit(chipselect, mode);
+	__ide_mm_outsw((void __iomem *) io_ports->data_addr, buf, len / 2);
+	leave_16bit(chipselect, mode);
+}
+
+static u8 ide_mm_inb(unsigned long port)
+{
+	return readb((void __iomem *) port);
+}
+
+static void ide_mm_outb(u8 value, unsigned long port)
+{
+	writeb(value, (void __iomem *) port);
+}
+
+static void at91_ide_tf_load(ide_drive_t *drive, ide_task_t *task)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	struct ide_taskfile *tf = &task->tf;
+	u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
+
+	if (task->tf_flags & IDE_TFLAG_FLAGGED)
+		HIHI = 0xFF;
+
+	if (task->tf_flags & IDE_TFLAG_OUT_DATA) {
+		u16 data = (tf->hob_data << 8) | tf->data;
+
+		at91_ide_output_data(drive, NULL, &data, 2);
+	}
+
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
+		ide_mm_outb(tf->hob_feature, io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
+		ide_mm_outb(tf->hob_nsect, io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
+		ide_mm_outb(tf->hob_lbal, io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
+		ide_mm_outb(tf->hob_lbam, io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
+		ide_mm_outb(tf->hob_lbah, io_ports->lbah_addr);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
+		ide_mm_outb(tf->feature, io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
+		ide_mm_outb(tf->nsect, io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
+		ide_mm_outb(tf->lbal, io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
+		ide_mm_outb(tf->lbam, io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
+		ide_mm_outb(tf->lbah, io_ports->lbah_addr);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
+		ide_mm_outb((tf->device & HIHI) | drive->select, io_ports->device_addr);
+}
+
+static void at91_ide_tf_read(ide_drive_t *drive, ide_task_t *task)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	struct ide_taskfile *tf = &task->tf;
+
+	if (task->tf_flags & IDE_TFLAG_IN_DATA) {
+		u16 data;
+
+		at91_ide_input_data(drive, NULL, &data, 2);
+		tf->data = data & 0xff;
+		tf->hob_data = (data >> 8) & 0xff;
+	}
+
+	/* be sure we're looking at the low order bits */
+	ide_mm_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
+
+	if (task->tf_flags & IDE_TFLAG_IN_FEATURE)
+		tf->feature = ide_mm_inb(io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_NSECT)
+		tf->nsect  = ide_mm_inb(io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAL)
+		tf->lbal   = ide_mm_inb(io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAM)
+		tf->lbam   = ide_mm_inb(io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAH)
+		tf->lbah   = ide_mm_inb(io_ports->lbah_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
+		tf->device = ide_mm_inb(io_ports->device_addr);
+
+	if (task->tf_flags & IDE_TFLAG_LBA48) {
+		ide_mm_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
+
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
+			tf->hob_feature = ide_mm_inb(io_ports->feature_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
+			tf->hob_nsect   = ide_mm_inb(io_ports->nsect_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
+			tf->hob_lbal    = ide_mm_inb(io_ports->lbal_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
+			tf->hob_lbam    = ide_mm_inb(io_ports->lbam_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
+			tf->hob_lbah    = ide_mm_inb(io_ports->lbah_addr);
+	}
+}
+
+static void at91_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+	struct ide_timing *timing;
+	u8 chipselect = drive->hwif->select_data;
+	int use_iordy = 0;
+
+	pdbg("chipselect %u pio %u\n", chipselect, pio);
+
+	timing = ide_timing_find_mode(XFER_PIO_0 + pio);
+	BUG_ON(!timing);
+
+	if ((pio > 2 || ata_id_has_iordy(drive->id)) &&
+	    !(ata_id_is_cfa(drive->id) && pio > 4))
+		use_iordy = 1;
+
+	apply_timings(chipselect, pio, timing, use_iordy);
+}
+
+static const struct ide_tp_ops at91_ide_tp_ops = {
+	.exec_command	= ide_exec_command,
+	.read_status	= ide_read_status,
+	.read_altstatus	= ide_read_altstatus,
+	.set_irq	= ide_set_irq,
+
+	.tf_load	= at91_ide_tf_load,
+	.tf_read	= at91_ide_tf_read,
+
+	.input_data	= at91_ide_input_data,
+	.output_data	= at91_ide_output_data,
+};
+
+static const struct ide_port_ops at91_ide_port_ops = {
+	.set_pio_mode	= at91_ide_set_pio_mode,
+};
+
+static const struct ide_port_info at91_ide_port_info __initdata = {
+	.port_ops	= &at91_ide_port_ops,
+	.tp_ops		= &at91_ide_tp_ops,
+	.host_flags 	= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA | IDE_HFLAG_SINGLE |
+			  IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS,
+	.pio_mask 	= ATA_PIO5,
+};
+
+/*
+ * If interrupt is delivered through GPIO, IRQ are triggered on falling
+ * and rising edge of signal. Whereas IDE device request interrupt on high
+ * level (rising edge in our case). This mean we have fake interrupts, so
+ * we need to check interrupt pin and exit instantly from ISR when line
+ * is on low level.
+ */
+
+irqreturn_t at91_irq_handler(int irq, void *dev_id)
+{
+	int ntries = 8;
+	int pin_val1, pin_val2;
+
+	/* additional deglitch, line can be noisy in badly designed PCB */
+	do {
+		pin_val1 = at91_get_gpio_value(irq);
+		pin_val2 = at91_get_gpio_value(irq);
+	} while (pin_val1 != pin_val2 && --ntries > 0);
+
+	if (pin_val1 == 0 || ntries <= 0)
+		return IRQ_HANDLED;
+
+	return ide_intr(irq, dev_id);
+}
+
+static int __init at91_ide_probe(struct platform_device *pdev)
+{
+	int ret;
+	hw_regs_t hw;
+	hw_regs_t *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_host *host;
+	struct resource *res;
+	unsigned long tf_base = 0, ctl_base = 0;
+	struct at91_cf_data *board = pdev->dev.platform_data;
+
+	if (!board)
+		return -ENODEV;
+
+	if (board->det_pin && at91_get_gpio_value(board->det_pin) != 0) {
+		perr("no device detected\n");
+		return -ENODEV;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		perr("can't get memory resource\n");
+		return -ENODEV;
+	}
+
+	if (!devm_request_mem_region(&pdev->dev, res->start + TASK_FILE,
+				     REGS_SIZE, "ide") ||
+	    !devm_request_mem_region(&pdev->dev, res->start + ALT_MODE,
+				     REGS_SIZE, "alt")) {
+		perr("memory resources in use\n");
+		return -EBUSY;
+	}
+
+	pdbg("chipselect %u irq %u res %08lx\n", board->chipselect,
+	     board->irq_pin, (unsigned long) res->start);
+
+	tf_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + TASK_FILE,
+					       REGS_SIZE);
+	ctl_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + ALT_MODE,
+						REGS_SIZE);
+	if (!tf_base || !ctl_base) {
+		perr("can't map memory regions\n");
+		return -EBUSY;
+	}
+
+	memset(&hw, 0, sizeof(hw));
+
+	if (board->flags & AT91_IDE_SWAP_A0_A2) {
+		/* workaround for stupid hardware bug */
+		hw.io_ports.data_addr	= tf_base + 0;
+		hw.io_ports.error_addr	= tf_base + 4;
+		hw.io_ports.nsect_addr	= tf_base + 2;
+		hw.io_ports.lbal_addr	= tf_base + 6;
+		hw.io_ports.lbam_addr	= tf_base + 1;
+		hw.io_ports.lbah_addr	= tf_base + 5;
+		hw.io_ports.device_addr = tf_base + 3;
+		hw.io_ports.command_addr = tf_base + 7;
+		hw.io_ports.ctl_addr	= ctl_base + 3;
+	} else
+		ide_std_init_ports(&hw, tf_base, ctl_base + 6);
+
+	hw.irq = board->irq_pin;
+	hw.chipset = ide_generic;
+	hw.dev = &pdev->dev;
+
+	host = ide_host_alloc(&at91_ide_port_info, hws);
+	if (!host) {
+		perr("failed to allocate ide host\n");
+		return -ENOMEM;
+	}
+
+	/* setup Static Memory Controller - PIO 0 as default */
+	apply_timings(board->chipselect, 0, ide_timing_find_mode(XFER_PIO_0), 0);
+
+	/* with GPIO interrupt we have to do quirks in handler */
+	if (board->irq_pin >= PIN_BASE)
+		host->irq_handler = at91_irq_handler;
+
+	host->ports[0]->select_data = board->chipselect;
+
+	ret = ide_host_register(host, &at91_ide_port_info, hws);
+	if (ret) {
+		perr("failed to register ide host\n");
+		goto err_free_host;
+	}
+	platform_set_drvdata(pdev, host);
+	return 0;
+
+err_free_host:
+	ide_host_free(host);
+	return ret;
+}
+
+static int __exit at91_ide_remove(struct platform_device *pdev)
+{
+	struct ide_host *host = platform_get_drvdata(pdev);
+
+	ide_host_remove(host);
+	return 0;
+}
+
+static struct platform_driver at91_ide_driver = {
+	.driver	= {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+	},
+	.remove	= __exit_p(at91_ide_remove),
+};
+
+static int __init at91_ide_init(void)
+{
+	return platform_driver_probe(&at91_ide_driver, at91_ide_probe);
+}
+
+static void __exit at91_ide_exit(void)
+{
+	platform_driver_unregister(&at91_ide_driver);
+}
+
+module_init(at91_ide_init);
+module_exit(at91_ide_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Stanislaw Gruszka <stf_xl@wp.pl>");
+
diff --git a/drivers/ide/atiixp.c b/drivers/ide/atiixp.c
index b2735d2..ecd1e62 100644
--- a/drivers/ide/atiixp.c
+++ b/drivers/ide/atiixp.c
@@ -52,7 +52,7 @@
 {
 	struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
 	unsigned long flags;
-	int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
+	int timing_shift = (drive->dn ^ 1) * 8;
 	u32 pio_timing_data;
 	u16 pio_mode_data;
 
@@ -85,7 +85,7 @@
 {
 	struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
 	unsigned long flags;
-	int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
+	int timing_shift = (drive->dn ^ 1) * 8;
 	u32 tmp32;
 	u16 tmp16;
 	u16 udma_ctl = 0;
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 0bfeb0c..ddfbea4 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -55,7 +55,7 @@
 
 static DEFINE_MUTEX(idecd_ref_mutex);
 
-static void ide_cd_release(struct kref *);
+static void ide_cd_release(struct device *);
 
 static struct cdrom_info *ide_cd_get(struct gendisk *disk)
 {
@@ -67,7 +67,7 @@
 		if (ide_device_get(cd->drive))
 			cd = NULL;
 		else
-			kref_get(&cd->kref);
+			get_device(&cd->dev);
 
 	}
 	mutex_unlock(&idecd_ref_mutex);
@@ -79,7 +79,7 @@
 	ide_drive_t *drive = cd->drive;
 
 	mutex_lock(&idecd_ref_mutex);
-	kref_put(&cd->kref, ide_cd_release);
+	put_device(&cd->dev);
 	ide_device_put(drive);
 	mutex_unlock(&idecd_ref_mutex);
 }
@@ -194,6 +194,14 @@
 			bio_sectors = max(bio_sectors(failed_command->bio), 4U);
 			sector &= ~(bio_sectors - 1);
 
+			/*
+			 * The SCSI specification allows for the value
+			 * returned by READ CAPACITY to be up to 75 2K
+			 * sectors past the last readable block.
+			 * Therefore, if we hit a medium error within the
+			 * last 75 2K sectors, we decrease the saved size
+			 * value.
+			 */
 			if (sector < get_capacity(info->disk) &&
 			    drive->probed_capacity - sector < 4 * 75)
 				set_capacity(info->disk, sector);
@@ -1790,15 +1798,17 @@
 	ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
 
 	ide_proc_unregister_driver(drive, info->driver);
-
+	device_del(&info->dev);
 	del_gendisk(info->disk);
 
-	ide_cd_put(info);
+	mutex_lock(&idecd_ref_mutex);
+	put_device(&info->dev);
+	mutex_unlock(&idecd_ref_mutex);
 }
 
-static void ide_cd_release(struct kref *kref)
+static void ide_cd_release(struct device *dev)
 {
-	struct cdrom_info *info = to_ide_drv(kref, cdrom_info);
+	struct cdrom_info *info = to_ide_drv(dev, cdrom_info);
 	struct cdrom_device_info *devinfo = &info->devinfo;
 	ide_drive_t *drive = info->drive;
 	struct gendisk *g = info->disk;
@@ -1997,7 +2007,12 @@
 
 	ide_init_disk(g, drive);
 
-	kref_init(&info->kref);
+	info->dev.parent = &drive->gendev;
+	info->dev.release = ide_cd_release;
+	dev_set_name(&info->dev, dev_name(&drive->gendev));
+
+	if (device_register(&info->dev))
+		goto out_free_disk;
 
 	info->drive = drive;
 	info->driver = &ide_cdrom_driver;
@@ -2011,7 +2026,7 @@
 	g->driverfs_dev = &drive->gendev;
 	g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE;
 	if (ide_cdrom_setup(drive)) {
-		ide_cd_release(&info->kref);
+		put_device(&info->dev);
 		goto failed;
 	}
 
@@ -2021,6 +2036,8 @@
 	add_disk(g);
 	return 0;
 
+out_free_disk:
+	put_disk(g);
 out_free_cd:
 	kfree(info);
 failed:
diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h
index ac40d6c..c878bfc 100644
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -80,7 +80,7 @@
 	ide_drive_t		*drive;
 	struct ide_driver	*driver;
 	struct gendisk		*disk;
-	struct kref		kref;
+	struct device		dev;
 
 	/* Buffer for table of contents.  NULL if we haven't allocated
 	   a TOC buffer for this device yet. */
diff --git a/drivers/ide/ide-disk_proc.c b/drivers/ide/ide-disk_proc.c
index 1146f42..1f86dcb 100644
--- a/drivers/ide/ide-disk_proc.c
+++ b/drivers/ide/ide-disk_proc.c
@@ -125,5 +125,5 @@
 	IDE_PROC_DEVSET(multcount,	0,    16),
 	IDE_PROC_DEVSET(nowerr,		0,     1),
 	IDE_PROC_DEVSET(wcache,		0,     1),
-	{ 0 },
+	{ NULL },
 };
diff --git a/drivers/ide/ide-floppy_proc.c b/drivers/ide/ide-floppy_proc.c
index 3ec762c..fcd4d81 100644
--- a/drivers/ide/ide-floppy_proc.c
+++ b/drivers/ide/ide-floppy_proc.c
@@ -29,5 +29,5 @@
 	IDE_PROC_DEVSET(bios_head, 0,  255),
 	IDE_PROC_DEVSET(bios_sect, 0,   63),
 	IDE_PROC_DEVSET(ticks,	   0,  255),
-	{ 0 },
+	{ NULL },
 };
diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c
index 7857b20..0471094 100644
--- a/drivers/ide/ide-gd.c
+++ b/drivers/ide/ide-gd.c
@@ -25,7 +25,7 @@
 
 static DEFINE_MUTEX(ide_disk_ref_mutex);
 
-static void ide_disk_release(struct kref *);
+static void ide_disk_release(struct device *);
 
 static struct ide_disk_obj *ide_disk_get(struct gendisk *disk)
 {
@@ -37,7 +37,7 @@
 		if (ide_device_get(idkp->drive))
 			idkp = NULL;
 		else
-			kref_get(&idkp->kref);
+			get_device(&idkp->dev);
 	}
 	mutex_unlock(&ide_disk_ref_mutex);
 	return idkp;
@@ -48,7 +48,7 @@
 	ide_drive_t *drive = idkp->drive;
 
 	mutex_lock(&ide_disk_ref_mutex);
-	kref_put(&idkp->kref, ide_disk_release);
+	put_device(&idkp->dev);
 	ide_device_put(drive);
 	mutex_unlock(&ide_disk_ref_mutex);
 }
@@ -66,17 +66,18 @@
 	struct gendisk *g = idkp->disk;
 
 	ide_proc_unregister_driver(drive, idkp->driver);
-
+	device_del(&idkp->dev);
 	del_gendisk(g);
-
 	drive->disk_ops->flush(drive);
 
-	ide_disk_put(idkp);
+	mutex_lock(&ide_disk_ref_mutex);
+	put_device(&idkp->dev);
+	mutex_unlock(&ide_disk_ref_mutex);
 }
 
-static void ide_disk_release(struct kref *kref)
+static void ide_disk_release(struct device *dev)
 {
-	struct ide_disk_obj *idkp = to_ide_drv(kref, ide_disk_obj);
+	struct ide_disk_obj *idkp = to_ide_drv(dev, ide_disk_obj);
 	ide_drive_t *drive = idkp->drive;
 	struct gendisk *g = idkp->disk;
 
@@ -348,7 +349,12 @@
 
 	ide_init_disk(g, drive);
 
-	kref_init(&idkp->kref);
+	idkp->dev.parent = &drive->gendev;
+	idkp->dev.release = ide_disk_release;
+	dev_set_name(&idkp->dev, dev_name(&drive->gendev));
+
+	if (device_register(&idkp->dev))
+		goto out_free_disk;
 
 	idkp->drive = drive;
 	idkp->driver = &ide_gd_driver;
@@ -373,6 +379,8 @@
 	add_disk(g);
 	return 0;
 
+out_free_disk:
+	put_disk(g);
 out_free_idkp:
 	kfree(idkp);
 failed:
diff --git a/drivers/ide/ide-gd.h b/drivers/ide/ide-gd.h
index a86779f..b604bdd 100644
--- a/drivers/ide/ide-gd.h
+++ b/drivers/ide/ide-gd.h
@@ -17,7 +17,7 @@
 	ide_drive_t		*drive;
 	struct ide_driver	*driver;
 	struct gendisk		*disk;
-	struct kref		kref;
+	struct device		dev;
 	unsigned int		openers;	/* protected by BKL for now */
 
 	/* Last failed packet command */
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 9ee51ad..a9a6c20 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -908,7 +908,7 @@
 	ide_drive_t	*uninitialized_var(drive);
 	ide_handler_t	*handler;
 	unsigned long	flags;
-	unsigned long	wait = -1;
+	int		wait = -1;
 	int		plug_device = 0;
 
 	spin_lock_irqsave(&hwif->lock, flags);
@@ -1162,6 +1162,7 @@
 
 	return irq_ret;
 }
+EXPORT_SYMBOL_GPL(ide_intr);
 
 /**
  *	ide_do_drive_cmd	-	issue IDE special command
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 753b92e..b1892bd 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -315,6 +315,8 @@
 	u8 io_32bit = drive->io_32bit;
 	u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
 
+	len++;
+
 	if (io_32bit) {
 		unsigned long uninitialized_var(flags);
 
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index ce0818a..ee8e3e7 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -950,6 +950,7 @@
 static int init_irq (ide_hwif_t *hwif)
 {
 	struct ide_io_ports *io_ports = &hwif->io_ports;
+	irq_handler_t irq_handler;
 	int sa = 0;
 
 	mutex_lock(&ide_cfg_mtx);
@@ -959,6 +960,10 @@
 	hwif->timer.function = &ide_timer_expiry;
 	hwif->timer.data = (unsigned long)hwif;
 
+	irq_handler = hwif->host->irq_handler;
+	if (irq_handler == NULL)
+		irq_handler = ide_intr;
+
 #if defined(__mc68000__)
 	sa = IRQF_SHARED;
 #endif /* __mc68000__ */
@@ -969,7 +974,7 @@
 	if (io_ports->ctl_addr)
 		hwif->tp_ops->set_irq(hwif, 1);
 
-	if (request_irq(hwif->irq, &ide_intr, sa, hwif->name, hwif))
+	if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif))
 		goto out_up;
 
 	if (!hwif->rqsize) {
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index 1d8978b..a7b9287 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -231,7 +231,7 @@
 	IDE_PROC_DEVSET(pio_mode, 0, 255),
 	IDE_PROC_DEVSET(unmaskirq, 0, 1),
 	IDE_PROC_DEVSET(using_dma, 0, 1),
-	{ 0 },
+	{ NULL },
 };
 
 static void proc_ide_settings_warn(void)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index d7ecd3c..4e6181c 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -169,7 +169,7 @@
 	ide_drive_t		*drive;
 	struct ide_driver	*driver;
 	struct gendisk		*disk;
-	struct kref		kref;
+	struct device		dev;
 
 	/*
 	 *	failed_pc points to the last failed packet command, or contains
@@ -267,7 +267,7 @@
 
 static struct class *idetape_sysfs_class;
 
-static void ide_tape_release(struct kref *);
+static void ide_tape_release(struct device *);
 
 static struct ide_tape_obj *ide_tape_get(struct gendisk *disk)
 {
@@ -279,7 +279,7 @@
 		if (ide_device_get(tape->drive))
 			tape = NULL;
 		else
-			kref_get(&tape->kref);
+			get_device(&tape->dev);
 	}
 	mutex_unlock(&idetape_ref_mutex);
 	return tape;
@@ -290,7 +290,7 @@
 	ide_drive_t *drive = tape->drive;
 
 	mutex_lock(&idetape_ref_mutex);
-	kref_put(&tape->kref, ide_tape_release);
+	put_device(&tape->dev);
 	ide_device_put(drive);
 	mutex_unlock(&idetape_ref_mutex);
 }
@@ -308,7 +308,7 @@
 	mutex_lock(&idetape_ref_mutex);
 	tape = idetape_devs[i];
 	if (tape)
-		kref_get(&tape->kref);
+		get_device(&tape->dev);
 	mutex_unlock(&idetape_ref_mutex);
 	return tape;
 }
@@ -2166,7 +2166,7 @@
 	__IDE_PROC_DEVSET(speed,	0, 0xffff, NULL, NULL),
 	__IDE_PROC_DEVSET(tdsc,		IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX,
 					mulf_tdsc, divf_tdsc),
-	{ 0 },
+	{ NULL },
 };
 #endif
 
@@ -2256,15 +2256,17 @@
 	idetape_tape_t *tape = drive->driver_data;
 
 	ide_proc_unregister_driver(drive, tape->driver);
-
+	device_del(&tape->dev);
 	ide_unregister_region(tape->disk);
 
-	ide_tape_put(tape);
+	mutex_lock(&idetape_ref_mutex);
+	put_device(&tape->dev);
+	mutex_unlock(&idetape_ref_mutex);
 }
 
-static void ide_tape_release(struct kref *kref)
+static void ide_tape_release(struct device *dev)
 {
-	struct ide_tape_obj *tape = to_ide_drv(kref, ide_tape_obj);
+	struct ide_tape_obj *tape = to_ide_drv(dev, ide_tape_obj);
 	ide_drive_t *drive = tape->drive;
 	struct gendisk *g = tape->disk;
 
@@ -2407,7 +2409,12 @@
 
 	ide_init_disk(g, drive);
 
-	kref_init(&tape->kref);
+	tape->dev.parent = &drive->gendev;
+	tape->dev.release = ide_tape_release;
+	dev_set_name(&tape->dev, dev_name(&drive->gendev));
+
+	if (device_register(&tape->dev))
+		goto out_free_disk;
 
 	tape->drive = drive;
 	tape->driver = &idetape_driver;
@@ -2436,6 +2443,8 @@
 
 	return 0;
 
+out_free_disk:
+	put_disk(g);
 out_free_tape:
 	kfree(tape);
 failed:
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 258805d..0920e3b 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -337,6 +337,7 @@
 	int a, b, i, j = 1;
 	unsigned int *dev_param_mask = (unsigned int *)kp->arg;
 
+	/* controller . device (0 or 1) [ : 1 (set) | 0 (clear) ] */
 	if (sscanf(s, "%d.%d:%d", &a, &b, &j) != 3 &&
 	    sscanf(s, "%d.%d", &a, &b) != 2)
 		return -EINVAL;
@@ -349,7 +350,7 @@
 	if (j)
 		*dev_param_mask |= (1 << i);
 	else
-		*dev_param_mask &= (1 << i);
+		*dev_param_mask &= ~(1 << i);
 
 	return 0;
 }
@@ -392,6 +393,8 @@
 {
 	int a, b, c = 0, h = 0, s = 0, i, j = 1;
 
+	/* controller . device (0 or 1) : Cylinders , Heads , Sectors */
+	/* controller . device (0 or 1) : 1 (use CHS) | 0 (ignore CHS) */
 	if (sscanf(str, "%d.%d:%d,%d,%d", &a, &b, &c, &h, &s) != 5 &&
 	    sscanf(str, "%d.%d:%d", &a, &b, &j) != 3)
 		return -EINVAL;
@@ -407,7 +410,7 @@
 	if (j)
 		ide_disks |= (1 << i);
 	else
-		ide_disks &= (1 << i);
+		ide_disks &= ~(1 << i);
 
 	ide_disks_chs[i].cyl  = c;
 	ide_disks_chs[i].head = h;
@@ -469,6 +472,8 @@
 {
 	int i, j = 1;
 
+	/* controller (ignore) */
+	/* controller : 1 (ignore) | 0 (use) */
 	if (sscanf(s, "%d:%d", &i, &j) != 2 && sscanf(s, "%d", &i) != 1)
 		return -EINVAL;
 
@@ -478,7 +483,7 @@
 	if (j)
 		ide_ignore_cable |= (1 << i);
 	else
-		ide_ignore_cable &= (1 << i);
+		ide_ignore_cable &= ~(1 << i);
 
 	return 0;
 }
diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c
index e1c4f54..13b8153 100644
--- a/drivers/ide/it821x.c
+++ b/drivers/ide/it821x.c
@@ -5,9 +5,8 @@
  *  May be copied or modified under the terms of the GNU General Public License
  *  Based in part on the ITE vendor provided SCSI driver.
  *
- *  Documentation available from
- * 	http://www.ite.com.tw/pc/IT8212F_V04.pdf
- *  Some other documents are NDA.
+ *  Documentation:
+ *	Datasheet is freely available, some other documents under NDA.
  *
  *  The ITE8212 isn't exactly a standard IDE controller. It has two
  *  modes. In pass through mode then it is an IDE controller. In its smart
diff --git a/drivers/ieee1394/ieee1394_core.c b/drivers/ieee1394/ieee1394_core.c
index 1028e72..8723380 100644
--- a/drivers/ieee1394/ieee1394_core.c
+++ b/drivers/ieee1394/ieee1394_core.c
@@ -1275,7 +1275,7 @@
 	unregister_chrdev_region(IEEE1394_CORE_DEV, 256);
 }
 
-module_init(ieee1394_init);
+fs_initcall(ieee1394_init);
 module_exit(ieee1394_cleanup);
 
 /* Exported symbols */
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index a01b448..4a65b96 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -2490,12 +2490,14 @@
 	int ret = 0;
 	struct nes_vnic *nesvnic;
 	struct nes_device *nesdev;
+	struct nes_ib_device *nesibdev;
 
 	nesvnic = to_nesvnic(nesqp->ibqp.device);
 	if (!nesvnic)
 		return -EINVAL;
 
 	nesdev = nesvnic->nesdev;
+	nesibdev = nesvnic->nesibdev;
 
 	nes_debug(NES_DBG_CM, "netdev refcnt = %u.\n",
 			atomic_read(&nesvnic->netdev->refcnt));
@@ -2507,6 +2509,8 @@
 	} else {
 		/* Need to free the Last Streaming Mode Message */
 		if (nesqp->ietf_frame) {
+			if (nesqp->lsmm_mr)
+				nesibdev->ibdev.dereg_mr(nesqp->lsmm_mr);
 			pci_free_consistent(nesdev->pcidev,
 					nesqp->private_data_len+sizeof(struct ietf_mpa_frame),
 					nesqp->ietf_frame, nesqp->ietf_frame_pbase);
@@ -2543,6 +2547,12 @@
 	u32 crc_value;
 	int ret;
 	int passive_state;
+	struct nes_ib_device *nesibdev;
+	struct ib_mr *ibmr = NULL;
+	struct ib_phys_buf ibphysbuf;
+	struct nes_pd *nespd;
+
+
 
 	ibqp = nes_get_qp(cm_id->device, conn_param->qpn);
 	if (!ibqp)
@@ -2601,6 +2611,26 @@
 	if (cm_id->remote_addr.sin_addr.s_addr !=
 			cm_id->local_addr.sin_addr.s_addr) {
 		u64temp = (unsigned long)nesqp;
+		nesibdev = nesvnic->nesibdev;
+		nespd = nesqp->nespd;
+		ibphysbuf.addr = nesqp->ietf_frame_pbase;
+		ibphysbuf.size = conn_param->private_data_len +
+					sizeof(struct ietf_mpa_frame);
+		ibmr = nesibdev->ibdev.reg_phys_mr((struct ib_pd *)nespd,
+						&ibphysbuf, 1,
+						IB_ACCESS_LOCAL_WRITE,
+						(u64 *)&nesqp->ietf_frame);
+		if (!ibmr) {
+			nes_debug(NES_DBG_CM, "Unable to register memory region"
+					"for lSMM for cm_node = %p \n",
+					cm_node);
+			return -ENOMEM;
+		}
+
+		ibmr->pd = &nespd->ibpd;
+		ibmr->device = nespd->ibpd.device;
+		nesqp->lsmm_mr = ibmr;
+
 		u64temp |= NES_SW_CONTEXT_ALIGN>>1;
 		set_wqe_64bit_value(wqe->wqe_words,
 			NES_IWARP_SQ_WQE_COMP_CTX_LOW_IDX,
@@ -2611,14 +2641,13 @@
 		wqe->wqe_words[NES_IWARP_SQ_WQE_TOTAL_PAYLOAD_IDX] =
 			cpu_to_le32(conn_param->private_data_len +
 			sizeof(struct ietf_mpa_frame));
-		wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_LOW_IDX] =
-			cpu_to_le32((u32)nesqp->ietf_frame_pbase);
-		wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_HIGH_IDX] =
-			cpu_to_le32((u32)((u64)nesqp->ietf_frame_pbase >> 32));
+		set_wqe_64bit_value(wqe->wqe_words,
+					NES_IWARP_SQ_WQE_FRAG0_LOW_IDX,
+					(u64)nesqp->ietf_frame);
 		wqe->wqe_words[NES_IWARP_SQ_WQE_LENGTH0_IDX] =
 			cpu_to_le32(conn_param->private_data_len +
 			sizeof(struct ietf_mpa_frame));
-		wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = 0;
+		wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = ibmr->lkey;
 
 		nesqp->nesqp_context->ird_ord_sizes |=
 			cpu_to_le32(NES_QPCONTEXT_ORDIRD_LSMM_PRESENT |
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 4fdb7245..d93a656 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -1360,8 +1360,10 @@
 					NES_QPCONTEXT_MISC_RQ_SIZE_SHIFT);
 			nesqp->nesqp_context->misc |= cpu_to_le32((u32)nesqp->hwqp.sq_encoded_size <<
 					NES_QPCONTEXT_MISC_SQ_SIZE_SHIFT);
+			if (!udata) {
 				nesqp->nesqp_context->misc |= cpu_to_le32(NES_QPCONTEXT_MISC_PRIV_EN);
 				nesqp->nesqp_context->misc |= cpu_to_le32(NES_QPCONTEXT_MISC_FAST_REGISTER_EN);
+			}
 			nesqp->nesqp_context->cqs = cpu_to_le32(nesqp->nesscq->hw_cq.cq_number +
 					((u32)nesqp->nesrcq->hw_cq.cq_number << 16));
 			u64temp = (u64)nesqp->hwqp.sq_pbase;
diff --git a/drivers/infiniband/hw/nes/nes_verbs.h b/drivers/infiniband/hw/nes/nes_verbs.h
index 6c6b4da..ae0ca9b 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.h
+++ b/drivers/infiniband/hw/nes/nes_verbs.h
@@ -134,6 +134,7 @@
 	struct ietf_mpa_frame *ietf_frame;
 	dma_addr_t            ietf_frame_pbase;
 	wait_queue_head_t     state_waitq;
+	struct ib_mr          *lsmm_mr;
 	unsigned long         socket;
 	struct nes_hw_qp      hwqp;
 	struct work_struct    work;
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index c3c8b9b..45470f1 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -839,7 +839,7 @@
  */
 static void atkbd_dell_laptop_keymap_fixup(struct atkbd *atkbd)
 {
-	const unsigned int forced_release_keys[] = {
+	static const unsigned int forced_release_keys[] = {
 		0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93,
 	};
 	int i;
@@ -856,7 +856,7 @@
  */
 static void atkbd_hp_keymap_fixup(struct atkbd *atkbd)
 {
-	const unsigned int forced_release_keys[] = {
+	static const unsigned int forced_release_keys[] = {
 		0x94,
 	};
 	int i;
diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c
index 1928401..ee855c5 100644
--- a/drivers/input/keyboard/bf54x-keys.c
+++ b/drivers/input/keyboard/bf54x-keys.c
@@ -209,8 +209,8 @@
 		goto out;
 	}
 
-	if (!pdata->debounce_time || !pdata->debounce_time > MAX_MULT ||
-	    !pdata->coldrive_time || !pdata->coldrive_time > MAX_MULT) {
+	if (!pdata->debounce_time || pdata->debounce_time > MAX_MULT ||
+	    !pdata->coldrive_time || pdata->coldrive_time > MAX_MULT) {
 		printk(KERN_ERR DRV_NAME
 			": Invalid Debounce/Columdrive Time from pdata\n");
 		bfin_write_KPAD_MSEL(0xFF0);	/* Default MSEL	*/
diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c
index c8ed065..abb04c8 100644
--- a/drivers/input/keyboard/corgikbd.c
+++ b/drivers/input/keyboard/corgikbd.c
@@ -288,7 +288,7 @@
 #define corgikbd_resume		NULL
 #endif
 
-static int __init corgikbd_probe(struct platform_device *pdev)
+static int __devinit corgikbd_probe(struct platform_device *pdev)
 {
 	struct corgikbd *corgikbd;
 	struct input_dev *input_dev;
@@ -368,7 +368,7 @@
 	return err;
 }
 
-static int corgikbd_remove(struct platform_device *pdev)
+static int __devexit corgikbd_remove(struct platform_device *pdev)
 {
 	int i;
 	struct corgikbd *corgikbd = platform_get_drvdata(pdev);
@@ -388,7 +388,7 @@
 
 static struct platform_driver corgikbd_driver = {
 	.probe		= corgikbd_probe,
-	.remove		= corgikbd_remove,
+	.remove		= __devexit_p(corgikbd_remove),
 	.suspend	= corgikbd_suspend,
 	.resume		= corgikbd_resume,
 	.driver		= {
@@ -397,7 +397,7 @@
 	},
 };
 
-static int __devinit corgikbd_init(void)
+static int __init corgikbd_init(void)
 {
 	return platform_driver_register(&corgikbd_driver);
 }
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 3f3d119..058fa8b 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -279,7 +279,7 @@
 #define omap_kp_resume	NULL
 #endif
 
-static int __init omap_kp_probe(struct platform_device *pdev)
+static int __devinit omap_kp_probe(struct platform_device *pdev)
 {
 	struct omap_kp *omap_kp;
 	struct input_dev *input_dev;
@@ -422,7 +422,7 @@
 	return -EINVAL;
 }
 
-static int omap_kp_remove(struct platform_device *pdev)
+static int __devexit omap_kp_remove(struct platform_device *pdev)
 {
 	struct omap_kp *omap_kp = platform_get_drvdata(pdev);
 
@@ -454,7 +454,7 @@
 
 static struct platform_driver omap_kp_driver = {
 	.probe		= omap_kp_probe,
-	.remove		= omap_kp_remove,
+	.remove		= __devexit_p(omap_kp_remove),
 	.suspend	= omap_kp_suspend,
 	.resume		= omap_kp_resume,
 	.driver		= {
@@ -463,7 +463,7 @@
 	},
 };
 
-static int __devinit omap_kp_init(void)
+static int __init omap_kp_init(void)
 {
 	printk(KERN_INFO "OMAP Keypad Driver\n");
 	return platform_driver_register(&omap_kp_driver);
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index c48b76a..9d1781a 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -343,7 +343,7 @@
 #define spitzkbd_resume		NULL
 #endif
 
-static int __init spitzkbd_probe(struct platform_device *dev)
+static int __devinit spitzkbd_probe(struct platform_device *dev)
 {
 	struct spitzkbd *spitzkbd;
 	struct input_dev *input_dev;
@@ -444,7 +444,7 @@
 	return err;
 }
 
-static int spitzkbd_remove(struct platform_device *dev)
+static int __devexit spitzkbd_remove(struct platform_device *dev)
 {
 	int i;
 	struct spitzkbd *spitzkbd = platform_get_drvdata(dev);
@@ -470,7 +470,7 @@
 
 static struct platform_driver spitzkbd_driver = {
 	.probe		= spitzkbd_probe,
-	.remove		= spitzkbd_remove,
+	.remove		= __devexit_p(spitzkbd_remove),
 	.suspend	= spitzkbd_suspend,
 	.resume		= spitzkbd_resume,
 	.driver		= {
@@ -479,7 +479,7 @@
 	},
 };
 
-static int __devinit spitzkbd_init(void)
+static int __init spitzkbd_init(void)
 {
 	return platform_driver_register(&spitzkbd_driver);
 }
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index 093c8c1..9705f3a 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -70,7 +70,7 @@
 config MOUSE_PS2_LIFEBOOK
 	bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EMBEDDED
 	default y
-	depends on MOUSE_PS2
+	depends on MOUSE_PS2 && X86
 	help
 	  Say Y here if you have a Fujitsu B-series Lifebook PS/2
 	  TouchScreen connected to your system.
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index b9a25d5..6ab0eb1a 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -542,7 +542,7 @@
 	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11) ||
 	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11) ||
 	    ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
-		pr_err("elantech.c: sending Elantech magic knock failed.\n");
+		pr_debug("elantech.c: sending Elantech magic knock failed.\n");
 		return -1;
 	}
 
@@ -551,8 +551,27 @@
 	 * set of magic numbers
 	 */
 	if (param[0] != 0x3c || param[1] != 0x03 || param[2] != 0xc8) {
-		pr_info("elantech.c: unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
-			param[0], param[1], param[2]);
+		pr_debug("elantech.c: "
+			 "unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
+			 param[0], param[1], param[2]);
+		return -1;
+	}
+
+	/*
+	 * Query touchpad's firmware version and see if it reports known
+	 * value to avoid mis-detection. Logitech mice are known to respond
+	 * to Elantech magic knock and there might be more.
+	 */
+	if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
+		pr_debug("elantech.c: failed to query firmware version.\n");
+		return -1;
+	}
+
+	pr_debug("elantech.c: Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n",
+		 param[0], param[1], param[2]);
+
+	if (param[0] == 0 || param[1] != 0) {
+		pr_debug("elantech.c: Probably not a real Elantech touchpad. Aborting.\n");
 		return -1;
 	}
 
@@ -600,8 +619,7 @@
 	int i, error;
 	unsigned char param[3];
 
-	etd = kzalloc(sizeof(struct elantech_data), GFP_KERNEL);
-	psmouse->private = etd;
+	psmouse->private = etd = kzalloc(sizeof(struct elantech_data), GFP_KERNEL);
 	if (!etd)
 		return -1;
 
@@ -610,14 +628,12 @@
 		etd->parity[i] = etd->parity[i & (i - 1)] ^ 1;
 
 	/*
-	 * Find out what version hardware this is
+	 * Do the version query again so we can store the result
 	 */
 	if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
 		pr_err("elantech.c: failed to query firmware version.\n");
 		goto init_fail;
 	}
-	pr_info("elantech.c: Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n",
-		param[0], param[1], param[2]);
 	etd->fw_version_maj = param[0];
 	etd->fw_version_min = param[2];
 
diff --git a/drivers/input/mouse/pxa930_trkball.c b/drivers/input/mouse/pxa930_trkball.c
index d297acc..1e827ad 100644
--- a/drivers/input/mouse/pxa930_trkball.c
+++ b/drivers/input/mouse/pxa930_trkball.c
@@ -83,7 +83,7 @@
 
 	__raw_writel(v, trkball->mmio_base + TBCR);
 
-	while (i--) {
+	while (--i) {
 		if (__raw_readl(trkball->mmio_base + TBCR) == v)
 			break;
 		msleep(1);
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 865fc69..f3e4f7b 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -182,11 +182,6 @@
 
 static int synaptics_query_hardware(struct psmouse *psmouse)
 {
-	int retries = 0;
-
-	while ((retries++ < 3) && psmouse_reset(psmouse))
-		/* empty */;
-
 	if (synaptics_identify(psmouse))
 		return -1;
 	if (synaptics_model_id(psmouse))
@@ -582,6 +577,8 @@
 	struct synaptics_data *priv = psmouse->private;
 	struct synaptics_data old_priv = *priv;
 
+	psmouse_reset(psmouse);
+
 	if (synaptics_detect(psmouse, 0))
 		return -1;
 
@@ -640,6 +637,8 @@
 	if (!priv)
 		return -1;
 
+	psmouse_reset(psmouse);
+
 	if (synaptics_query_hardware(psmouse)) {
 		printk(KERN_ERR "Unable to query Synaptics hardware.\n");
 		goto init_fail;
diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c
index b10ffae..e29cdc1 100644
--- a/drivers/input/serio/ambakmi.c
+++ b/drivers/input/serio/ambakmi.c
@@ -57,7 +57,7 @@
 	struct amba_kmi_port *kmi = io->port_data;
 	unsigned int timeleft = 10000; /* timeout in 100ms */
 
-	while ((readb(KMISTAT) & KMISTAT_TXEMPTY) == 0 && timeleft--)
+	while ((readb(KMISTAT) & KMISTAT_TXEMPTY) == 0 && --timeleft)
 		udelay(10);
 
 	if (timeleft)
@@ -129,8 +129,8 @@
 	io->write	= amba_kmi_write;
 	io->open	= amba_kmi_open;
 	io->close	= amba_kmi_close;
-	strlcpy(io->name, dev->dev.bus_id, sizeof(io->name));
-	strlcpy(io->phys, dev->dev.bus_id, sizeof(io->phys));
+	strlcpy(io->name, dev_name(&dev->dev), sizeof(io->name));
+	strlcpy(io->phys, dev_name(&dev->dev), sizeof(io->phys));
 	io->port_data	= kmi;
 	io->dev.parent	= &dev->dev;
 
diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c
index adc3bd6..bd0f92d 100644
--- a/drivers/input/serio/gscps2.c
+++ b/drivers/input/serio/gscps2.c
@@ -359,7 +359,7 @@
 
 	snprintf(serio->name, sizeof(serio->name), "GSC PS/2 %s",
 		 (ps2port->id == GSC_ID_KEYBOARD) ? "keyboard" : "mouse");
-	strlcpy(serio->phys, dev->dev.bus_id, sizeof(serio->phys));
+	strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
 	serio->id.type		= SERIO_8042;
 	serio->write		= gscps2_write;
 	serio->open		= gscps2_open;
diff --git a/drivers/input/serio/sa1111ps2.c b/drivers/input/serio/sa1111ps2.c
index 2ad8878..57953c0 100644
--- a/drivers/input/serio/sa1111ps2.c
+++ b/drivers/input/serio/sa1111ps2.c
@@ -246,8 +246,8 @@
 	serio->write		= ps2_write;
 	serio->open		= ps2_open;
 	serio->close		= ps2_close;
-	strlcpy(serio->name, dev->dev.bus_id, sizeof(serio->name));
-	strlcpy(serio->phys, dev->dev.bus_id, sizeof(serio->phys));
+	strlcpy(serio->name, dev_name(&dev->dev), sizeof(serio->name));
+	strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
 	serio->port_data	= ps2if;
 	serio->dev.parent	= &dev->dev;
 	ps2if->io		= serio;
diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c
index a89a6a8..055969e 100644
--- a/drivers/input/touchscreen/atmel_tsadcc.c
+++ b/drivers/input/touchscreen/atmel_tsadcc.c
@@ -236,7 +236,7 @@
 	ts_dev->bufferedmeasure = 0;
 
 	snprintf(ts_dev->phys, sizeof(ts_dev->phys),
-		 "%s/input0", pdev->dev.bus_id);
+		 "%s/input0", dev_name(&pdev->dev));
 
 	input_dev->name = "atmel touch screen controller";
 	input_dev->phys = ts_dev->phys;
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c
index 65202c9..3fb51b5 100644
--- a/drivers/input/touchscreen/corgi_ts.c
+++ b/drivers/input/touchscreen/corgi_ts.c
@@ -268,7 +268,7 @@
 #define corgits_resume		NULL
 #endif
 
-static int __init corgits_probe(struct platform_device *pdev)
+static int __devinit corgits_probe(struct platform_device *pdev)
 {
 	struct corgi_ts *corgi_ts;
 	struct input_dev *input_dev;
@@ -343,7 +343,7 @@
 	return err;
 }
 
-static int corgits_remove(struct platform_device *pdev)
+static int __devexit corgits_remove(struct platform_device *pdev)
 {
 	struct corgi_ts *corgi_ts = platform_get_drvdata(pdev);
 
@@ -352,12 +352,13 @@
 	corgi_ts->machinfo->put_hsync();
 	input_unregister_device(corgi_ts->input);
 	kfree(corgi_ts);
+
 	return 0;
 }
 
 static struct platform_driver corgits_driver = {
 	.probe		= corgits_probe,
-	.remove		= corgits_remove,
+	.remove		= __devexit_p(corgits_remove),
 	.suspend	= corgits_suspend,
 	.resume		= corgits_resume,
 	.driver		= {
@@ -366,7 +367,7 @@
 	},
 };
 
-static int __devinit corgits_init(void)
+static int __init corgits_init(void)
 {
 	return platform_driver_register(&corgits_driver);
 }
diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index b75dc29..4ab0702 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -289,7 +289,8 @@
 
 	pdata->init_platform_hw();
 
-	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", client->dev.bus_id);
+	snprintf(ts->phys, sizeof(ts->phys),
+		 "%s/input0", dev_name(&client->dev));
 
 	input_dev->name = "TSC2007 Touchscreen";
 	input_dev->phys = ts->phys;
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 5080b26..fb7cb9b 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -60,6 +60,10 @@
 module_param(swap_xy, bool, 0644);
 MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped.");
 
+static int hwcalib_xy;
+module_param(hwcalib_xy, bool, 0644);
+MODULE_PARM_DESC(hwcalib_xy, "If set hw-calibrated X/Y are used if available");
+
 /* device specifc data/functions */
 struct usbtouch_usb;
 struct usbtouch_device_info {
@@ -118,6 +122,7 @@
 
 #define USB_DEVICE_HID_CLASS(vend, prod) \
 	.match_flags = USB_DEVICE_ID_MATCH_INT_CLASS \
+		| USB_DEVICE_ID_MATCH_INT_PROTOCOL \
 		| USB_DEVICE_ID_MATCH_DEVICE, \
 	.idVendor = (vend), \
 	.idProduct = (prod), \
@@ -260,8 +265,13 @@
 
 static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
-	dev->x = (pkt[8] << 8) | pkt[7];
-	dev->y = (pkt[10] << 8) | pkt[9];
+	if (hwcalib_xy) {
+		dev->x = (pkt[4] << 8) | pkt[3];
+		dev->y = 0xffff - ((pkt[6] << 8) | pkt[5]);
+	} else {
+		dev->x = (pkt[8] << 8) | pkt[7];
+		dev->y = (pkt[10] << 8) | pkt[9];
+	}
 	dev->touch = (pkt[2] & 0x40) ? 1 : 0;
 
 	return 1;
@@ -294,6 +304,12 @@
 			return ret;
 	}
 
+	/* Default min/max xy are the raw values, override if using hw-calib */
+	if (hwcalib_xy) {
+		input_set_abs_params(usbtouch->input, ABS_X, 0, 0xffff, 0, 0);
+		input_set_abs_params(usbtouch->input, ABS_Y, 0, 0xffff, 0, 0);
+	}
+
 	return 0;
 }
 #endif
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index b4d44e5..8132533 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -212,6 +212,9 @@
 	hcall(LHCALL_NOTIFY, lvq->config.pfn << PAGE_SHIFT, 0, 0);
 }
 
+/* An extern declaration inside a C file is bad form.  Don't do it. */
+extern void lguest_setup_irq(unsigned int irq);
+
 /* This routine finds the first virtqueue described in the configuration of
  * this device and sets it up.
  *
@@ -266,6 +269,9 @@
 		goto unmap;
 	}
 
+	/* Make sure the interrupt is allocated. */
+	lguest_setup_irq(lvq->config.irq);
+
 	/* Tell the interrupt for this virtqueue to go to the virtio_ring
 	 * interrupt handler. */
 	/* FIXME: We used to have a flag for the Host to tell us we could use
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 03b4cd0..a307f87 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -214,12 +214,7 @@
 	return mddev;
 }
 
-static void mddev_delayed_delete(struct work_struct *ws)
-{
-	mddev_t *mddev = container_of(ws, mddev_t, del_work);
-	kobject_del(&mddev->kobj);
-	kobject_put(&mddev->kobj);
-}
+static void mddev_delayed_delete(struct work_struct *ws);
 
 static void mddev_put(mddev_t *mddev)
 {
@@ -3542,6 +3537,21 @@
 
 int mdp_major = 0;
 
+static void mddev_delayed_delete(struct work_struct *ws)
+{
+	mddev_t *mddev = container_of(ws, mddev_t, del_work);
+
+	if (mddev->private == &md_redundancy_group) {
+		sysfs_remove_group(&mddev->kobj, &md_redundancy_group);
+		if (mddev->sysfs_action)
+			sysfs_put(mddev->sysfs_action);
+		mddev->sysfs_action = NULL;
+		mddev->private = NULL;
+	}
+	kobject_del(&mddev->kobj);
+	kobject_put(&mddev->kobj);
+}
+
 static int md_alloc(dev_t dev, char *name)
 {
 	static DEFINE_MUTEX(disks_mutex);
@@ -4033,13 +4043,9 @@
 			mddev->queue->merge_bvec_fn = NULL;
 			mddev->queue->unplug_fn = NULL;
 			mddev->queue->backing_dev_info.congested_fn = NULL;
-			if (mddev->pers->sync_request) {
-				sysfs_remove_group(&mddev->kobj, &md_redundancy_group);
-				if (mddev->sysfs_action)
-					sysfs_put(mddev->sysfs_action);
-				mddev->sysfs_action = NULL;
-			}
 			module_put(mddev->pers->owner);
+			if (mddev->pers->sync_request)
+				mddev->private = &md_redundancy_group;
 			mddev->pers = NULL;
 			/* tell userspace to handle 'inactive' */
 			sysfs_notify_dirent(mddev->sysfs_state);
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 01e3cff..e246642 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1237,8 +1237,9 @@
 	update_head_pos(mirror, r1_bio);
 
 	if (atomic_dec_and_test(&r1_bio->remaining)) {
-		md_done_sync(mddev, r1_bio->sectors, uptodate);
+		sector_t s = r1_bio->sectors;
 		put_buf(r1_bio);
+		md_done_sync(mddev, s, uptodate);
 	}
 }
 
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 6736d6d..7301631 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1236,6 +1236,7 @@
 	/* for reconstruct, we always reschedule after a read.
 	 * for resync, only after all reads
 	 */
+	rdev_dec_pending(conf->mirrors[d].rdev, conf->mddev);
 	if (test_bit(R10BIO_IsRecover, &r10_bio->state) ||
 	    atomic_dec_and_test(&r10_bio->remaining)) {
 		/* we have read all the blocks,
@@ -1243,7 +1244,6 @@
 		 */
 		reschedule_retry(r10_bio);
 	}
-	rdev_dec_pending(conf->mirrors[d].rdev, conf->mddev);
 }
 
 static void end_sync_write(struct bio *bio, int error)
@@ -1264,11 +1264,13 @@
 
 	update_head_pos(i, r10_bio);
 
+	rdev_dec_pending(conf->mirrors[d].rdev, mddev);
 	while (atomic_dec_and_test(&r10_bio->remaining)) {
 		if (r10_bio->master_bio == NULL) {
 			/* the primary of several recovery bios */
-			md_done_sync(mddev, r10_bio->sectors, 1);
+			sector_t s = r10_bio->sectors;
 			put_buf(r10_bio);
+			md_done_sync(mddev, s, 1);
 			break;
 		} else {
 			r10bio_t *r10_bio2 = (r10bio_t *)r10_bio->master_bio;
@@ -1276,7 +1278,6 @@
 			r10_bio = r10_bio2;
 		}
 	}
-	rdev_dec_pending(conf->mirrors[d].rdev, mddev);
 }
 
 /*
@@ -1749,8 +1750,6 @@
 	if (!go_faster && conf->nr_waiting)
 		msleep_interruptible(1000);
 
-	bitmap_cond_end_sync(mddev->bitmap, sector_nr);
-
 	/* Again, very different code for resync and recovery.
 	 * Both must result in an r10bio with a list of bios that
 	 * have bi_end_io, bi_sector, bi_bdev set,
@@ -1886,6 +1885,8 @@
 		/* resync. Schedule a read for every block at this virt offset */
 		int count = 0;
 
+		bitmap_cond_end_sync(mddev->bitmap, sector_nr);
+
 		if (!bitmap_start_sync(mddev->bitmap, sector_nr,
 				       &sync_blocks, mddev->degraded) &&
 		    !conf->fullsync && !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
@@ -2010,13 +2011,13 @@
 	/* There is nowhere to write, so all non-sync
 	 * drives must be failed, so try the next chunk...
 	 */
-	{
-	sector_t sec = max_sector - sector_nr;
-	sectors_skipped += sec;
+	if (sector_nr + max_sync < max_sector)
+		max_sector = sector_nr + max_sync;
+
+	sectors_skipped += (max_sector - sector_nr);
 	chunks_skipped ++;
 	sector_nr = max_sector;
 	goto skipped;
-	}
 }
 
 static int run(mddev_t *mddev)
diff --git a/drivers/media/dvb/b2c2/flexcop-hw-filter.c b/drivers/media/dvb/b2c2/flexcop-hw-filter.c
index b386cc6..451974b 100644
--- a/drivers/media/dvb/b2c2/flexcop-hw-filter.c
+++ b/drivers/media/dvb/b2c2/flexcop-hw-filter.c
@@ -192,6 +192,7 @@
 
 	return 0;
 }
+EXPORT_SYMBOL(flexcop_pid_feed_control);
 
 void flexcop_hw_filter_init(struct flexcop_device *fc)
 {
diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c
index 5b30dfc..76e37fd 100644
--- a/drivers/media/dvb/b2c2/flexcop-pci.c
+++ b/drivers/media/dvb/b2c2/flexcop-pci.c
@@ -13,9 +13,9 @@
 module_param(enable_pid_filtering, int, 0444);
 MODULE_PARM_DESC(enable_pid_filtering, "enable hardware pid filtering: supported values: 0 (fullts), 1");
 
-static int irq_chk_intv;
+static int irq_chk_intv = 100;
 module_param(irq_chk_intv, int, 0644);
-MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ watchdog (currently just debugging).");
+MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ streaming watchdog.");
 
 #ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
 #define dprintk(level,args...) \
@@ -34,7 +34,9 @@
 
 static int debug;
 module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debug level (1=info,2=regs,4=TS,8=irqdma (|-able))." DEBSTATUS);
+MODULE_PARM_DESC(debug,
+	"set debug level (1=info,2=regs,4=TS,8=irqdma,16=check (|-able))."
+	 DEBSTATUS);
 
 #define DRIVER_VERSION "0.1"
 #define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver"
@@ -58,6 +60,8 @@
 	int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */
 	u32 last_dma1_cur_pos; /* position of the pointer last time the timer/packet irq occured */
 	int count;
+	int count_prev;
+	int stream_problem;
 
 	spinlock_t irq_lock;
 
@@ -103,18 +107,32 @@
 		container_of(work, struct flexcop_pci, irq_check_work.work);
 	struct flexcop_device *fc = fc_pci->fc_dev;
 
-	flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714);
+	if (fc->feedcount) {
 
-	flexcop_dump_reg(fc_pci->fc_dev,dma1_000,4);
+		if (fc_pci->count == fc_pci->count_prev) {
+			deb_chk("no IRQ since the last check\n");
+			if (fc_pci->stream_problem++ == 3) {
+				struct dvb_demux_feed *feed;
 
-	if (v.sram_dest_reg_714.net_ovflow_error)
-		deb_chk("sram net_ovflow_error\n");
-	if (v.sram_dest_reg_714.media_ovflow_error)
-		deb_chk("sram media_ovflow_error\n");
-	if (v.sram_dest_reg_714.cai_ovflow_error)
-		deb_chk("sram cai_ovflow_error\n");
-	if (v.sram_dest_reg_714.cai_ovflow_error)
-		deb_chk("sram cai_ovflow_error\n");
+				spin_lock_irq(&fc->demux.lock);
+				list_for_each_entry(feed, &fc->demux.feed_list,
+					list_head) {
+					flexcop_pid_feed_control(fc, feed, 0);
+				}
+
+				list_for_each_entry(feed, &fc->demux.feed_list,
+					list_head) {
+					flexcop_pid_feed_control(fc, feed, 1);
+				}
+				spin_unlock_irq(&fc->demux.lock);
+
+				fc_pci->stream_problem = 0;
+			}
+		} else {
+			fc_pci->stream_problem = 0;
+			fc_pci->count_prev = fc_pci->count;
+		}
+	}
 
 	schedule_delayed_work(&fc_pci->irq_check_work,
 			msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
@@ -216,16 +234,12 @@
 		flexcop_dma_control_timer_irq(fc,FC_DMA_1,1);
 		deb_irq("IRQ enabled\n");
 
+		fc_pci->count_prev = fc_pci->count;
+
 //		fc_pci->active_dma1_addr = 0;
 //		flexcop_dma_control_size_irq(fc,FC_DMA_1,1);
 
-		if (irq_chk_intv > 0)
-			schedule_delayed_work(&fc_pci->irq_check_work,
-					msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
 	} else {
-		if (irq_chk_intv > 0)
-			cancel_delayed_work(&fc_pci->irq_check_work);
-
 		flexcop_dma_control_timer_irq(fc,FC_DMA_1,0);
 		deb_irq("IRQ disabled\n");
 
@@ -299,8 +313,6 @@
 					IRQF_SHARED, DRIVER_NAME, fc_pci)) != 0)
 		goto err_pci_iounmap;
 
-
-
 	fc_pci->init_state |= FC_PCI_INIT;
 	return ret;
 
@@ -375,6 +387,10 @@
 
 	INIT_DELAYED_WORK(&fc_pci->irq_check_work, flexcop_pci_irq_check_work);
 
+		if (irq_chk_intv > 0)
+			schedule_delayed_work(&fc_pci->irq_check_work,
+		msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
+
 	return ret;
 
 err_fc_exit:
@@ -393,6 +409,9 @@
 {
 	struct flexcop_pci *fc_pci = pci_get_drvdata(pdev);
 
+	if (irq_chk_intv > 0)
+		cancel_delayed_work(&fc_pci->irq_check_work);
+
 	flexcop_pci_dma_exit(fc_pci);
 	flexcop_device_exit(fc_pci->fc_dev);
 	flexcop_pci_exit(fc_pci);
diff --git a/drivers/media/dvb/b2c2/flexcop.c b/drivers/media/dvb/b2c2/flexcop.c
index 676413a..9106895 100644
--- a/drivers/media/dvb/b2c2/flexcop.c
+++ b/drivers/media/dvb/b2c2/flexcop.c
@@ -212,8 +212,7 @@
 	v210.sw_reset_210.Block_reset_enable = 0xb2;
 
 	fc->write_ibi_reg(fc,sw_reset_210,v210);
-	msleep(1);
-
+	udelay(1000);
 	fc->write_ibi_reg(fc,ctrl_208,v208_save);
 }
 
diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c
index 5d882a4..2ac738f 100644
--- a/drivers/media/video/em28xx/em28xx-audio.c
+++ b/drivers/media/video/em28xx/em28xx-audio.c
@@ -463,6 +463,8 @@
 	pcm->info_flags = 0;
 	pcm->private_data = dev;
 	strcpy(pcm->name, "Empia 28xx Capture");
+
+	snd_card_set_dev(card, &dev->udev->dev);
 	strcpy(card->driver, "Empia Em28xx Audio");
 	strcpy(card->shortname, "Em28xx Audio");
 	strcpy(card->longname, "Empia Em28xx Audio");
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index a1d6008..07c334f 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -1155,24 +1155,24 @@
 {
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
-	const struct soc_camera_data_format *host_fmt, *cam_fmt = NULL;
-	const struct soc_camera_format_xlate *xlate;
+	const struct soc_camera_data_format *cam_fmt = NULL;
+	const struct soc_camera_format_xlate *xlate = NULL;
 	struct soc_camera_sense sense = {
 		.master_clock = pcdev->mclk,
 		.pixel_clock_max = pcdev->ciclk / 4,
 	};
-	int ret, buswidth;
+	int ret;
 
-	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
-	if (!xlate) {
-		dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
-		return -EINVAL;
+	if (pixfmt) {
+		xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
+		if (!xlate) {
+			dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
+			return -EINVAL;
+		}
+
+		cam_fmt = xlate->cam_fmt;
 	}
 
-	buswidth = xlate->buswidth;
-	host_fmt = xlate->host_fmt;
-	cam_fmt = xlate->cam_fmt;
-
 	/* If PCLK is used to latch data from the sensor, check sense */
 	if (pcdev->platform_flags & PXA_CAMERA_PCLK_EN)
 		icd->sense = &sense;
@@ -1201,8 +1201,8 @@
 	}
 
 	if (pixfmt && !ret) {
-		icd->buswidth = buswidth;
-		icd->current_fmt = host_fmt;
+		icd->buswidth = xlate->buswidth;
+		icd->current_fmt = xlate->host_fmt;
 	}
 
 	return ret;
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 9a2586b..ddcb81d 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -603,21 +603,18 @@
 	const struct soc_camera_format_xlate *xlate;
 	int ret;
 
+	if (!pixfmt)
+		return icd->ops->set_fmt(icd, pixfmt, rect);
+
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (!xlate) {
 		dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
-	switch (pixfmt) {
-	case 0:				/* Only geometry change */
-		ret = icd->ops->set_fmt(icd, pixfmt, rect);
-		break;
-	default:
-		ret = icd->ops->set_fmt(icd, xlate->cam_fmt->fourcc, rect);
-	}
+	ret = icd->ops->set_fmt(icd, xlate->cam_fmt->fourcc, rect);
 
-	if (pixfmt && !ret) {
+	if (!ret) {
 		icd->buswidth = xlate->buswidth;
 		icd->current_fmt = xlate->host_fmt;
 		pcdev->camera_fmt = xlate->cam_fmt;
diff --git a/drivers/media/video/uvc/uvc_status.c b/drivers/media/video/uvc/uvc_status.c
index c1e4ae2..c705f24 100644
--- a/drivers/media/video/uvc/uvc_status.c
+++ b/drivers/media/video/uvc/uvc_status.c
@@ -46,8 +46,8 @@
 	usb_to_input_id(udev, &input->id);
 	input->dev.parent = &dev->intf->dev;
 
-	set_bit(EV_KEY, input->evbit);
-	set_bit(BTN_0, input->keybit);
+	__set_bit(EV_KEY, input->evbit);
+	__set_bit(KEY_CAMERA, input->keybit);
 
 	if ((ret = input_register_device(input)) < 0)
 		goto error;
@@ -70,8 +70,10 @@
 static void uvc_input_report_key(struct uvc_device *dev, unsigned int code,
 	int value)
 {
-	if (dev->input)
+	if (dev->input) {
 		input_report_key(dev->input, code, value);
+		input_sync(dev->input);
+	}
 }
 
 #else
@@ -96,7 +98,7 @@
 			return;
 		uvc_trace(UVC_TRACE_STATUS, "Button (intf %u) %s len %d\n",
 			data[1], data[3] ? "pressed" : "released", len);
-		uvc_input_report_key(dev, BTN_0, data[3]);
+		uvc_input_report_key(dev, KEY_CAMERA, data[3]);
 	} else {
 		uvc_trace(UVC_TRACE_STATUS, "Stream %u error event %02x %02x "
 			"len %d.\n", data[1], data[2], data[3], len);
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 96ac883..ea3aafb 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -91,9 +91,9 @@
 		controllers (default=0)");
 
 static int mpt_msi_enable_sas;
-module_param(mpt_msi_enable_sas, int, 1);
+module_param(mpt_msi_enable_sas, int, 0);
 MODULE_PARM_DESC(mpt_msi_enable_sas, " Enable MSI Support for SAS \
-		controllers (default=1)");
+		controllers (default=0)");
 
 
 static int mpt_channel_mapping;
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index 84d5ea1..b457a05 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -1383,6 +1383,11 @@
 			wm8350->power.rev_g_coeff = 1;
 			break;
 
+		case 1:
+			dev_info(wm8350->dev, "WM8351 Rev B\n");
+			wm8350->power.rev_g_coeff = 1;
+			break;
+
 		default:
 			dev_err(wm8350->dev, "Unknown WM8351 CHIP_REV\n");
 			ret = -ENODEV;
diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
index f26667a..cf99185 100644
--- a/drivers/misc/hpilo.c
+++ b/drivers/misc/hpilo.c
@@ -710,6 +710,7 @@
 
 static struct pci_device_id ilo_devices[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB204) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3307) },
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, ilo_devices);
@@ -758,7 +759,7 @@
 	class_destroy(ilo_class);
 }
 
-MODULE_VERSION("0.06");
+MODULE_VERSION("1.0");
 MODULE_ALIAS(ILO_NAME);
 MODULE_DESCRIPTION(ILO_NAME);
 MODULE_AUTHOR("David Altobelli <david.altobelli@hp.com>");
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 9c50e6f..34ce270 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -248,12 +248,15 @@
 
 	sg_init_one(&sg, data_buf, len);
 
-	/*
-	 * The spec states that CSR and CID accesses have a timeout
-	 * of 64 clock cycles.
-	 */
-	data.timeout_ns = 0;
-	data.timeout_clks = 64;
+	if (opcode == MMC_SEND_CSD || opcode == MMC_SEND_CID) {
+		/*
+		 * The spec states that CSR and CID accesses have a timeout
+		 * of 64 clock cycles.
+		 */
+		data.timeout_ns = 0;
+		data.timeout_clks = 64;
+	} else
+		mmc_set_data_timeout(&data, card);
 
 	mmc_wait_for_req(host, &mrq);
 
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index f4a67c6..2db166b 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -793,8 +793,7 @@
 			      host->mem->start + host->sdidata);
 
 	if (!setup_ok) {
-		s3c2410_dma_config(host->dma, 4,
-			(S3C2410_DCON_HWTRIG | S3C2410_DCON_CH0_SDI));
+		s3c2410_dma_config(host->dma, 4, 0);
 		s3c2410_dma_set_buffdone_fn(host->dma,
 					    s3cmci_dma_done_callback);
 		s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART);
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 8cff5f5..406da9a 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -107,6 +107,7 @@
 
 static const struct sdhci_pci_fixes sdhci_cafe = {
 	.quirks		= SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
+			  SDHCI_QUIRK_NO_BUSY_IRQ |
 			  SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
 };
 
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index f52f305..accb592 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1291,8 +1291,11 @@
 		if (host->cmd->data)
 			DBG("Cannot wait for busy signal when also "
 				"doing a data transfer");
-		else
+		else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ))
 			return;
+
+		/* The controller does not support the end-of-busy IRQ,
+		 * fall through and take the SDHCI_INT_RESPONSE */
 	}
 
 	if (intmask & SDHCI_INT_RESPONSE)
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index ebb8365..43c37c6 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -208,6 +208,8 @@
 #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL			(1<<12)
 /* Controller has an issue with buffer bits for small transfers */
 #define SDHCI_QUIRK_BROKEN_SMALL_PIO			(1<<13)
+/* Controller does not provide transfer-complete interrupt when not busy */
+#define SDHCI_QUIRK_NO_BUSY_IRQ				(1<<14)
 
 	int			irq;		/* Device IRQ */
 	void __iomem *		ioaddr;		/* Mapped address */
diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c
index 821d0ed..c76d6e5 100644
--- a/drivers/mtd/chips/map_rom.c
+++ b/drivers/mtd/chips/map_rom.c
@@ -19,6 +19,7 @@
 static int maprom_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
 static void maprom_nop (struct mtd_info *);
 static struct mtd_info *map_rom_probe(struct map_info *map);
+static int maprom_erase (struct mtd_info *mtd, struct erase_info *info);
 
 static struct mtd_chip_driver maprom_chipdrv = {
 	.probe	= map_rom_probe,
@@ -42,6 +43,7 @@
 	mtd->read = maprom_read;
 	mtd->write = maprom_write;
 	mtd->sync = maprom_nop;
+	mtd->erase = maprom_erase;
 	mtd->flags = MTD_CAP_ROM;
 	mtd->erasesize = map->size;
 	mtd->writesize = 1;
@@ -71,6 +73,12 @@
 	return -EIO;
 }
 
+static int maprom_erase (struct mtd_info *mtd, struct erase_info *info)
+{
+	/* We do our best 8) */
+	return -EROFS;
+}
+
 static int __init map_rom_init(void)
 {
 	register_mtd_chip_driver(&maprom_chipdrv);
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index d44f741..6d9f810 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -821,7 +821,8 @@
 					if (!(info->flags & IS_POW2PS))
 						return info;
 				}
-			}
+			} else
+				return info;
 		}
 	}
 
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
index a425d09..00248e8 100644
--- a/drivers/mtd/devices/slram.c
+++ b/drivers/mtd/devices/slram.c
@@ -267,22 +267,28 @@
 	if (*(szlength) != '+') {
 		devlength = simple_strtoul(szlength, &buffer, 0);
 		devlength = handle_unit(devlength, buffer) - devstart;
+		if (devlength < devstart)
+			goto err_out;
+
+		devlength -= devstart;
 	} else {
 		devlength = simple_strtoul(szlength + 1, &buffer, 0);
 		devlength = handle_unit(devlength, buffer);
 	}
 	T("slram: devname=%s, devstart=0x%lx, devlength=0x%lx\n",
 			devname, devstart, devlength);
-	if ((devstart < 0) || (devlength < 0) || (devlength % SLRAM_BLK_SZ != 0)) {
-		E("slram: Illegal start / length parameter.\n");
-		return(-EINVAL);
-	}
+	if (devlength % SLRAM_BLK_SZ != 0)
+		goto err_out;
 
 	if ((devstart = register_device(devname, devstart, devlength))){
 		unregister_devices();
 		return((int)devstart);
 	}
 	return(0);
+
+err_out:
+	E("slram: Illegal length parameter.\n");
+	return(-EINVAL);
 }
 
 #ifndef MODULE
diff --git a/drivers/mtd/lpddr/Kconfig b/drivers/mtd/lpddr/Kconfig
index acd4ea9..5a401d8 100644
--- a/drivers/mtd/lpddr/Kconfig
+++ b/drivers/mtd/lpddr/Kconfig
@@ -12,6 +12,7 @@
 	  DDR memories, intended for battery-operated systems.
 
 config MTD_QINFO_PROBE
+	depends on MTD_LPDDR
 	tristate "Detect flash chips by QINFO probe"
 	help
 	    Device Information for LPDDR chips is offered through the Overlay
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 0225cbb..043d50f 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -491,7 +491,7 @@
 
 config MTD_BFIN_ASYNC
 	tristate "Blackfin BF533-STAMP Flash Chip Support"
-	depends on BFIN533_STAMP && MTD_CFI
+	depends on BFIN533_STAMP && MTD_CFI && MTD_COMPLEX_MAPPINGS
 	select MTD_PARTITIONS
 	default y
 	help
diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c
index 6fec86a..576611f 100644
--- a/drivers/mtd/maps/bfin-async-flash.c
+++ b/drivers/mtd/maps/bfin-async-flash.c
@@ -152,14 +152,18 @@
 
 	if (gpio_request(state->enet_flash_pin, DRIVER_NAME)) {
 		pr_devinit(KERN_ERR DRIVER_NAME ": Failed to request gpio %d\n", state->enet_flash_pin);
+		kfree(state);
 		return -EBUSY;
 	}
 	gpio_direction_output(state->enet_flash_pin, 1);
 
 	pr_devinit(KERN_NOTICE DRIVER_NAME ": probing %d-bit flash bus\n", state->map.bankwidth * 8);
 	state->mtd = do_map_probe(memory->name, &state->map);
-	if (!state->mtd)
+	if (!state->mtd) {
+		gpio_free(state->enet_flash_pin);
+		kfree(state);
 		return -ENXIO;
+	}
 
 #ifdef CONFIG_MTD_PARTITIONS
 	ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0);
diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c
index 5f7a245..424f17d 100644
--- a/drivers/mtd/maps/ck804xrom.c
+++ b/drivers/mtd/maps/ck804xrom.c
@@ -342,9 +342,9 @@
 	{ 0, }
 };
 
+#if 0
 MODULE_DEVICE_TABLE(pci, ck804xrom_pci_tbl);
 
-#if 0
 static struct pci_driver ck804xrom_driver = {
 	.name =		MOD_NAME,
 	.id_table =	ck804xrom_pci_tbl,
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 8774366..2297182 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -29,6 +29,7 @@
 	struct map_info		map[MAX_RESOURCES];
 #ifdef CONFIG_MTD_PARTITIONS
 	int			nr_parts;
+	struct mtd_partition	*parts;
 #endif
 };
 
@@ -45,25 +46,29 @@
 
 	physmap_data = dev->dev.platform_data;
 
-#ifdef CONFIG_MTD_CONCAT
-	if (info->cmtd != info->mtd[0]) {
+	if (info->cmtd) {
+#ifdef CONFIG_MTD_PARTITIONS
+		if (info->nr_parts || physmap_data->nr_parts)
+			del_mtd_partitions(info->cmtd);
+		else
+			del_mtd_device(info->cmtd);
+#else
 		del_mtd_device(info->cmtd);
-		mtd_concat_destroy(info->cmtd);
+#endif
 	}
+#ifdef CONFIG_MTD_PARTITIONS
+	if (info->nr_parts)
+		kfree(info->parts);
+#endif
+
+#ifdef CONFIG_MTD_CONCAT
+	if (info->cmtd != info->mtd[0])
+		mtd_concat_destroy(info->cmtd);
 #endif
 
 	for (i = 0; i < MAX_RESOURCES; i++) {
-		if (info->mtd[i] != NULL) {
-#ifdef CONFIG_MTD_PARTITIONS
-			if (info->nr_parts || physmap_data->nr_parts)
-				del_mtd_partitions(info->mtd[i]);
-			else
-				del_mtd_device(info->mtd[i]);
-#else
-			del_mtd_device(info->mtd[i]);
-#endif
+		if (info->mtd[i] != NULL)
 			map_destroy(info->mtd[i]);
-		}
 	}
 	return 0;
 }
@@ -86,9 +91,6 @@
 	int err = 0;
 	int i;
 	int devices_found = 0;
-#ifdef CONFIG_MTD_PARTITIONS
-	struct mtd_partition *parts;
-#endif
 
 	physmap_data = dev->dev.platform_data;
 	if (physmap_data == NULL)
@@ -167,10 +169,11 @@
 		goto err_out;
 
 #ifdef CONFIG_MTD_PARTITIONS
-	err = parse_mtd_partitions(info->cmtd, part_probe_types, &parts, 0);
+	err = parse_mtd_partitions(info->cmtd, part_probe_types,
+				&info->parts, 0);
 	if (err > 0) {
-		add_mtd_partitions(info->cmtd, parts, err);
-		kfree(parts);
+		add_mtd_partitions(info->cmtd, info->parts, err);
+		info->nr_parts = err;
 		return 0;
 	}
 
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index 917cf8d..c2dfd3e 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -149,7 +149,7 @@
 
 static struct platform_driver orion_nand_driver = {
 	.probe		= orion_nand_probe,
-	.remove		= orion_nand_remove,
+	.remove		= __devexit_p(orion_nand_remove),
 	.driver		= {
 		.name	= "orion_nand",
 		.owner	= THIS_MODULE,
diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
index c69c0cd..811a3cc 100644
--- a/drivers/net/arm/Makefile
+++ b/drivers/net/arm/Makefile
@@ -4,7 +4,7 @@
 #
 
 obj-$(CONFIG_ARM_AM79C961A)	+= am79c961a.o
-obj-$(CONFIG_ARM_ETHERH)	+= etherh.o ../8390.o
+obj-$(CONFIG_ARM_ETHERH)	+= etherh.o
 obj-$(CONFIG_ARM_ETHER3)	+= ether3.o
 obj-$(CONFIG_ARM_ETHER1)	+= ether1.o
 obj-$(CONFIG_ARM_AT91_ETHER)	+= at91_ether.o
diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c
index 54b52e5..f52f668 100644
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/arm/etherh.c
@@ -641,15 +641,15 @@
 	.ndo_open		= etherh_open,
 	.ndo_stop		= etherh_close,
 	.ndo_set_config		= etherh_set_config,
-	.ndo_start_xmit		= ei_start_xmit,
-	.ndo_tx_timeout		= ei_tx_timeout,
-	.ndo_get_stats		= ei_get_stats,
-	.ndo_set_multicast_list = ei_set_multicast_list,
+	.ndo_start_xmit		= __ei_start_xmit,
+	.ndo_tx_timeout		= __ei_tx_timeout,
+	.ndo_get_stats		= __ei_get_stats,
+	.ndo_set_multicast_list = __ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
-	.ndo_poll_controller	= ei_poll,
+	.ndo_poll_controller	= __ei_poll,
 #endif
 };
 
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index 1cf2f94..f3a1274 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -560,7 +560,7 @@
 		msleep(1);
 	}
 
-	if (reset_timeout == 0) {
+	if (reset_timeout < 0) {
 		dev_crit(ksp->dev,
 			 "Timeout waiting for DMA engines to reset\n");
 		/* And blithely carry on */
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index c38512e..dc5f051 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -1264,8 +1264,14 @@
 static void b44_chip_reset(struct b44 *bp, int reset_kind)
 {
 	struct ssb_device *sdev = bp->sdev;
+	bool was_enabled;
 
-	if (ssb_device_is_enabled(bp->sdev)) {
+	was_enabled = ssb_device_is_enabled(bp->sdev);
+
+	ssb_device_enable(bp->sdev, 0);
+	ssb_pcicore_dev_irqvecs_enable(&sdev->bus->pcicore, sdev);
+
+	if (was_enabled) {
 		bw32(bp, B44_RCV_LAZY, 0);
 		bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE);
 		b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 200, 1);
@@ -1277,10 +1283,8 @@
 		}
 		bw32(bp, B44_DMARX_CTRL, 0);
 		bp->rx_prod = bp->rx_cons = 0;
-	} else
-		ssb_pcicore_dev_irqvecs_enable(&sdev->bus->pcicore, sdev);
+	}
 
-	ssb_device_enable(bp->sdev, 0);
 	b44_clear_stats(bp);
 
 	/*
@@ -2236,6 +2240,7 @@
 	struct net_device *dev = ssb_get_drvdata(sdev);
 
 	unregister_netdev(dev);
+	ssb_device_disable(sdev, 0);
 	ssb_bus_may_powerdown(sdev->bus);
 	free_netdev(dev);
 	ssb_pcihost_set_power_state(sdev, PCI_D3hot);
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 9fb3883..e0578fe 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -4113,7 +4113,7 @@
 		const struct net_device_ops *slave_ops
 			= slave->dev->netdev_ops;
 		if (slave_ops->ndo_neigh_setup)
-			return slave_ops->ndo_neigh_setup(dev, parms);
+			return slave_ops->ndo_neigh_setup(slave->dev, parms);
 	}
 	return 0;
 }
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 9b12a13..9831b3f 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -1284,7 +1284,7 @@
 	spin_lock_irqsave(&priv->txlock, flags);
 
 	/* check if there is space to queue this packet */
-	if (nr_frags > priv->num_txbdfree) {
+	if ((nr_frags+1) > priv->num_txbdfree) {
 		/* no space, stop the queue */
 		netif_stop_queue(dev);
 		dev->stats.tx_fifo_errors++;
diff --git a/drivers/net/hp-plus.c b/drivers/net/hp-plus.c
index 5e070f4..0486cbe 100644
--- a/drivers/net/hp-plus.c
+++ b/drivers/net/hp-plus.c
@@ -467,7 +467,7 @@
 			if (this_dev != 0) break; /* only autoprobe 1st one */
 			printk(KERN_NOTICE "hp-plus.c: Presently autoprobing (not recommended) for a single card.\n");
 		}
-		dev = alloc_ei_netdev();
+		dev = alloc_eip_netdev();
 		if (!dev)
 			break;
 		dev->irq = irq[this_dev];
diff --git a/drivers/net/jme.c b/drivers/net/jme.c
index 08b3405..a6e1a35 100644
--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -957,13 +957,14 @@
 		goto out_inc;
 
 	i = atomic_read(&rxring->next_to_clean);
-	while (limit-- > 0) {
+	while (limit > 0) {
 		rxdesc = rxring->desc;
 		rxdesc += i;
 
 		if ((rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_OWN)) ||
 		!(rxdesc->descwb.desccnt & RXWBDCNT_WBCPL))
 			goto out;
+		--limit;
 
 		desccnt = rxdesc->descwb.desccnt & RXWBDCNT_DCNT;
 
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 9f33e44..1308778 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -588,7 +588,12 @@
 		adapter->pci_mem_read = netxen_nic_pci_mem_read_2M;
 		adapter->pci_mem_write = netxen_nic_pci_mem_write_2M;
 
-		mem_ptr0 = ioremap(mem_base, mem_len);
+		mem_ptr0 = pci_ioremap_bar(pdev, 0);
+		if (mem_ptr0 == NULL) {
+			dev_err(&pdev->dev, "failed to map PCI bar 0\n");
+			return -EIO;
+		}
+
 		pci_len0 = mem_len;
 		first_page_group_start = 0;
 		first_page_group_end   = 0;
@@ -795,9 +800,12 @@
 	 * See if the firmware gave us a virtual-physical port mapping.
 	 */
 	adapter->physical_port = adapter->portnum;
-	i = adapter->pci_read_normalize(adapter, CRB_V2P(adapter->portnum));
-	if (i != 0x55555555)
-		adapter->physical_port = i;
+	if (adapter->fw_major < 4) {
+		i = adapter->pci_read_normalize(adapter,
+				CRB_V2P(adapter->portnum));
+		if (i != 0x55555555)
+			adapter->physical_port = i;
+	}
 
 	adapter->flags &= ~(NETXEN_NIC_MSI_ENABLED | NETXEN_NIC_MSIX_ENABLED);
 
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index e5cb6b1..2404a83 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -1035,7 +1035,8 @@
 	DEBUG(3, "%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
 		  dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RxStatus));
 	while (!((rx_status = inw(ioaddr + RxStatus)) & 0x8000) &&
-		   (--worklimit >= 0)) {
+			worklimit > 0) {
+		worklimit--;
 		if (rx_status & 0x4000) { /* Error, update stats. */
 			short error = rx_status & 0x3800;
 			dev->stats.rx_errors++;
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 73ecc65..1e01b8a 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -857,7 +857,8 @@
     DEBUG(3, "%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
 	  dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
     while (!((rx_status = inw(ioaddr + RX_STATUS)) & 0x8000) &&
-	   (--worklimit >= 0)) {
+		    worklimit > 0) {
+	worklimit--;
 	if (rx_status & 0x4000) { /* Error, update stats. */
 	    short error = rx_status & 0x3800;
 	    dev->stats.rx_errors++;
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 0771eb6..b347340 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -81,9 +81,9 @@
 #define RTL8169_TX_TIMEOUT	(6*HZ)
 #define RTL8169_PHY_TIMEOUT	(10*HZ)
 
-#define RTL_EEPROM_SIG		cpu_to_le32(0x8129)
-#define RTL_EEPROM_SIG_MASK	cpu_to_le32(0xffff)
+#define RTL_EEPROM_SIG		0x8129
 #define RTL_EEPROM_SIG_ADDR	0x0000
+#define RTL_EEPROM_MAC_ADDR	0x0007
 
 /* write/read MMIO register */
 #define RTL_W8(reg, val8)	writeb ((val8), ioaddr + (reg))
@@ -293,6 +293,11 @@
 	/* Cfg9346Bits */
 	Cfg9346_Lock	= 0x00,
 	Cfg9346_Unlock	= 0xc0,
+	Cfg9346_Program	= 0x80,		/* Programming mode */
+	Cfg9346_EECS	= 0x08,		/* Chip select */
+	Cfg9346_EESK	= 0x04,		/* Serial data clock */
+	Cfg9346_EEDI	= 0x02,		/* Data input */
+	Cfg9346_EEDO	= 0x01,		/* Data output */
 
 	/* rx_mode_bits */
 	AcceptErr	= 0x20,
@@ -305,6 +310,7 @@
 	/* RxConfigBits */
 	RxCfgFIFOShift	= 13,
 	RxCfgDMAShift	=  8,
+	RxCfg9356SEL	=  6, 		/* EEPROM type: 0 = 9346, 1 = 9356 */
 
 	/* TxConfigBits */
 	TxInterFrameGapShift = 24,
@@ -1963,6 +1969,108 @@
 
 };
 
+/* Delay between EEPROM clock transitions. Force out buffered PCI writes. */
+#define RTL_EEPROM_DELAY()	RTL_R8(Cfg9346)
+#define RTL_EEPROM_READ_CMD	6
+
+/* read 16bit word stored in EEPROM. EEPROM is addressed by words. */
+static u16 rtl_eeprom_read(void __iomem *ioaddr, int addr)
+{
+	u16 result = 0;
+	int cmd, cmd_len, i;
+
+	/* check for EEPROM address size (in bits) */
+	if (RTL_R32(RxConfig) & (1 << RxCfg9356SEL)) {
+		/* EEPROM is 93C56 */
+		cmd_len = 3 + 8; /* 3 bits for command id and 8 for address */
+		cmd = (RTL_EEPROM_READ_CMD << 8) | (addr & 0xff);
+	} else {
+		/* EEPROM is 93C46 */
+		cmd_len = 3 + 6; /* 3 bits for command id and 6 for address */
+		cmd = (RTL_EEPROM_READ_CMD << 6) | (addr & 0x3f);
+	}
+
+	/* enter programming mode */
+	RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS);
+	RTL_EEPROM_DELAY();
+
+	/* write command and requested address */
+	while (cmd_len--) {
+		u8 x = Cfg9346_Program | Cfg9346_EECS;
+
+		x |= (cmd & (1 << cmd_len)) ? Cfg9346_EEDI : 0;
+
+		/* write a bit */
+		RTL_W8(Cfg9346, x);
+		RTL_EEPROM_DELAY();
+
+		/* raise clock */
+		RTL_W8(Cfg9346, x | Cfg9346_EESK);
+		RTL_EEPROM_DELAY();
+	}
+
+	/* lower clock */
+	RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS);
+	RTL_EEPROM_DELAY();
+
+	/* read back 16bit value */
+	for (i = 16; i > 0; i--) {
+		/* raise clock */
+		RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS | Cfg9346_EESK);
+		RTL_EEPROM_DELAY();
+
+		result <<= 1;
+		result |= (RTL_R8(Cfg9346) & Cfg9346_EEDO) ? 1 : 0;
+
+		/* lower clock */
+		RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS);
+		RTL_EEPROM_DELAY();
+	}
+
+	RTL_W8(Cfg9346, Cfg9346_Program);
+	/* leave programming mode */
+	RTL_W8(Cfg9346, Cfg9346_Lock);
+
+	return result;
+}
+
+static void rtl_init_mac_address(struct rtl8169_private *tp,
+				 void __iomem *ioaddr)
+{
+	struct pci_dev *pdev = tp->pci_dev;
+	u16 x;
+	u8 mac[8];
+
+	/* read EEPROM signature */
+	x = rtl_eeprom_read(ioaddr, RTL_EEPROM_SIG_ADDR);
+
+	if (x != RTL_EEPROM_SIG) {
+		dev_info(&pdev->dev, "Missing EEPROM signature: %04x\n", x);
+		return;
+	}
+
+	/* read MAC address */
+	x = rtl_eeprom_read(ioaddr, RTL_EEPROM_MAC_ADDR);
+	mac[0] = x & 0xff;
+	mac[1] = x >> 8;
+	x = rtl_eeprom_read(ioaddr, RTL_EEPROM_MAC_ADDR + 1);
+	mac[2] = x & 0xff;
+	mac[3] = x >> 8;
+	x = rtl_eeprom_read(ioaddr, RTL_EEPROM_MAC_ADDR + 2);
+	mac[4] = x & 0xff;
+	mac[5] = x >> 8;
+
+	if (netif_msg_probe(tp)) {
+		DECLARE_MAC_BUF(buf);
+
+		dev_info(&pdev->dev, "MAC address found in EEPROM: %s\n",
+			 print_mac(buf, mac));
+	}
+
+	if (is_valid_ether_addr(mac))
+		rtl_rar_set(tp, mac);
+}
+
 static int __devinit
 rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
@@ -2141,6 +2249,8 @@
 
 	tp->mmio_addr = ioaddr;
 
+	rtl_init_mac_address(tp, ioaddr);
+
 	/* Get MAC address */
 	for (i = 0; i < MAC_ADDR_LEN; i++)
 		dev->dev_addr[i] = RTL_R8(MAC0 + i);
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index 870b4c3..a45952e 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -42,6 +42,16 @@
   #define SMC_USE_16BIT		0
   #define SMC_USE_32BIT		1
   #define SMC_IRQ_SENSE		IRQF_TRIGGER_LOW
+#elif defined(CONFIG_ARCH_OMAP34XX)
+  #define SMC_USE_16BIT		0
+  #define SMC_USE_32BIT		1
+  #define SMC_IRQ_SENSE		IRQF_TRIGGER_LOW
+  #define SMC_MEM_RESERVED	1
+#elif defined(CONFIG_ARCH_OMAP24XX)
+  #define SMC_USE_16BIT		0
+  #define SMC_USE_32BIT		1
+  #define SMC_IRQ_SENSE		IRQF_TRIGGER_LOW
+  #define SMC_MEM_RESERVED	1
 #else
 /*
  * Default configuration
@@ -675,6 +685,7 @@
 #define CHIP_9116	0x0116
 #define CHIP_9117	0x0117
 #define CHIP_9118	0x0118
+#define CHIP_9211	0x9211
 #define CHIP_9215	0x115A
 #define CHIP_9217	0x117A
 #define CHIP_9218	0x118A
@@ -689,6 +700,7 @@
 	{ CHIP_9116, "LAN9116" },
 	{ CHIP_9117, "LAN9117" },
 	{ CHIP_9118, "LAN9118" },
+	{ CHIP_9211, "LAN9211" },
 	{ CHIP_9215, "LAN9215" },
 	{ CHIP_9217, "LAN9217" },
 	{ CHIP_9218, "LAN9218" },
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 8d64b1d..0fcb750 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -1229,7 +1229,7 @@
 			break;
 	} while (val & (GREG_SWRST_TXRST | GREG_SWRST_RXRST));
 
-	if (limit <= 0)
+	if (limit < 0)
 		printk(KERN_ERR "%s: SW reset is ghetto.\n", gp->dev->name);
 
 	if (gp->phy_type == phy_serialink || gp->phy_type == phy_serdes)
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index d4fb4ac..4e9bd38 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -2649,8 +2649,6 @@
 	int err = -ENODEV;
 
 	sbus_dp = to_of_device(op->dev.parent)->node;
-	if (is_qfe)
-		sbus_dp = to_of_device(op->dev.parent->parent)->node;
 
 	/* We can match PCI devices too, do not accept those here. */
 	if (strcmp(sbus_dp->name, "sbus"))
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index b080f94..dabdf59 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1473,7 +1473,8 @@
 {
 	u32 reg;
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
 		return;
 
 	reg = MII_TG3_MISC_SHDW_WREN |
diff --git a/drivers/net/tokenring/tmspci.c b/drivers/net/tokenring/tmspci.c
index 5f60177..e2150b3 100644
--- a/drivers/net/tokenring/tmspci.c
+++ b/drivers/net/tokenring/tmspci.c
@@ -121,11 +121,6 @@
 		goto err_out_trdev;
 	}
 
-	ret = request_irq(pdev->irq, tms380tr_interrupt, IRQF_SHARED,
-			  dev->name, dev);
-	if (ret)
-		goto err_out_region;
-
 	dev->base_addr	= pci_ioaddr;
 	dev->irq 	= pci_irq_line;
 	dev->dma	= 0;
@@ -142,7 +137,7 @@
 	ret = tmsdev_init(dev, &pdev->dev);
 	if (ret) {
 		printk("%s: unable to get memory for dev->priv.\n", dev->name);
-		goto err_out_irq;
+		goto err_out_region;
 	}
 
 	tp = netdev_priv(dev);
@@ -157,6 +152,11 @@
 
 	tp->tmspriv = cardinfo;
 
+	ret = request_irq(pdev->irq, tms380tr_interrupt, IRQF_SHARED,
+			  dev->name, dev);
+	if (ret)
+		goto err_out_tmsdev;
+
 	dev->open = tms380tr_open;
 	dev->stop = tms380tr_close;
 	pci_set_drvdata(pdev, dev);
@@ -164,15 +164,15 @@
 
 	ret = register_netdev(dev);
 	if (ret)
-		goto err_out_tmsdev;
+		goto err_out_irq;
 	
 	return 0;
 
+err_out_irq:
+	free_irq(pdev->irq, dev);
 err_out_tmsdev:
 	pci_set_drvdata(pdev, NULL);
 	tmsdev_term(dev);
-err_out_irq:
-	free_irq(pdev->irq, dev);
 err_out_region:
 	release_region(pci_ioaddr, TMS_PCI_IO_EXTENT);
 err_out_trdev:
diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
index 5463591..0ada4ed 100644
--- a/drivers/net/ucc_geth_mii.c
+++ b/drivers/net/ucc_geth_mii.c
@@ -107,7 +107,7 @@
 static int uec_mdio_reset(struct mii_bus *bus)
 {
 	struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
-	unsigned int timeout = PHY_INIT_TIMEOUT;
+	int timeout = PHY_INIT_TIMEOUT;
 
 	mutex_lock(&bus->mdio_lock);
 
@@ -123,7 +123,7 @@
 
 	mutex_unlock(&bus->mdio_lock);
 
-	if (timeout <= 0) {
+	if (timeout < 0) {
 		printk(KERN_ERR "%s: The MII Bus is stuck!\n", bus->name);
 		return -EBUSY;
 	}
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index e009481..396f821 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -1451,6 +1451,14 @@
 	// Cables-to-Go USB Ethernet Adapter
 	USB_DEVICE(0x0b95, 0x772a),
 	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// ABOCOM for pci
+	USB_DEVICE(0x14ea, 0xab11),
+	.driver_info = (unsigned long) &ax88178_info,
+}, {
+	// ASIX 88772a
+	USB_DEVICE(0x0db0, 0xa877),
+	.driver_info = (unsigned long) &ax88772_info,
 },
 	{ },		// END
 };
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 0e061df..55e8ecc 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -559,6 +559,11 @@
 	USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
 			USB_CDC_PROTO_NONE),
 	.driver_info = (unsigned long) &cdc_info,
+}, {
+	/* Ericsson F3507g */
+	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1900, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &cdc_info,
 },
 	{ },		// END
 };
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 5b67bbf..81682c6 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -635,6 +635,10 @@
 	USB_DEVICE(0x0a47, 0x9601),	/* Hirose USB-100 */
 	.driver_info = (unsigned long)&dm9601_info,
 	 },
+	{
+	USB_DEVICE(0x0fe6, 0x8101),	/* DM9601 USB to Fast Ethernet Adapter */
+	.driver_info = (unsigned long)&dm9601_info,
+	 },
 	{},			// END
 };
 
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index aa31490..c32284f 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -723,8 +723,8 @@
 	if (dev->mii.mdio_read)
 		return mii_link_ok(&dev->mii);
 
-	/* Otherwise, say we're up (to avoid breaking scripts) */
-	return 1;
+	/* Otherwise, dtrt for drivers calling netif_carrier_{on,off} */
+	return ethtool_op_get_link(net);
 }
 EXPORT_SYMBOL_GPL(usbnet_get_link);
 
diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c
index e24f7b3..04882c8 100644
--- a/drivers/net/usb/zaurus.c
+++ b/drivers/net/usb/zaurus.c
@@ -341,6 +341,11 @@
 	USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
 			USB_CDC_PROTO_NONE),
 	.driver_info = (unsigned long) &bogus_mdlm_info,
+}, {
+	/* Motorola MOTOMAGX phones */
+	USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6425, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &bogus_mdlm_info,
 },
 
 /* Olympus has some models with a Zaurus-compatible option.
diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 108bbbe..124fe75 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -239,6 +239,16 @@
 	return 0;
 }
 
+static int veth_close(struct net_device *dev)
+{
+	struct veth_priv *priv = netdev_priv(dev);
+
+	netif_carrier_off(dev);
+	netif_carrier_off(priv->peer);
+
+	return 0;
+}
+
 static int veth_dev_init(struct net_device *dev)
 {
 	struct veth_net_stats *stats;
@@ -265,6 +275,7 @@
 static const struct net_device_ops veth_netdev_ops = {
 	.ndo_init            = veth_dev_init,
 	.ndo_open            = veth_open,
+	.ndo_stop            = veth_close,
 	.ndo_start_xmit      = veth_xmit,
 	.ndo_get_stats       = veth_get_stats,
 	.ndo_set_mac_address = eth_mac_addr,
@@ -280,44 +291,6 @@
 	dev->destructor = veth_dev_free;
 }
 
-static void veth_change_state(struct net_device *dev)
-{
-	struct net_device *peer;
-	struct veth_priv *priv;
-
-	priv = netdev_priv(dev);
-	peer = priv->peer;
-
-	if (netif_carrier_ok(peer)) {
-		if (!netif_carrier_ok(dev))
-			netif_carrier_on(dev);
-	} else {
-		if (netif_carrier_ok(dev))
-			netif_carrier_off(dev);
-	}
-}
-
-static int veth_device_event(struct notifier_block *unused,
-			     unsigned long event, void *ptr)
-{
-	struct net_device *dev = ptr;
-
-	if (dev->netdev_ops->ndo_open != veth_open)
-		goto out;
-
-	switch (event) {
-	case NETDEV_CHANGE:
-		veth_change_state(dev);
-		break;
-	}
-out:
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block veth_notifier_block __read_mostly = {
-	.notifier_call	= veth_device_event,
-};
-
 /*
  * netlink interface
  */
@@ -468,14 +441,12 @@
 
 static __init int veth_init(void)
 {
-	register_netdevice_notifier(&veth_notifier_block);
 	return rtnl_link_register(&veth_link_ops);
 }
 
 static __exit void veth_exit(void)
 {
 	rtnl_link_unregister(&veth_link_ops);
-	unregister_netdevice_notifier(&veth_notifier_block);
 }
 
 module_init(veth_init);
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 727f067..0e80990 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -1538,6 +1538,7 @@
 bad:
 	if (ah)
 		ath9k_hw_detach(ah);
+	ath9k_exit_debug(sc);
 
 	return error;
 }
@@ -1545,7 +1546,7 @@
 static int ath_attach(u16 devid, struct ath_softc *sc)
 {
 	struct ieee80211_hw *hw = sc->hw;
-	int error = 0;
+	int error = 0, i;
 
 	DPRINTF(sc, ATH_DBG_CONFIG, "Attach ATH hw\n");
 
@@ -1589,11 +1590,11 @@
 	/* initialize tx/rx engine */
 	error = ath_tx_init(sc, ATH_TXBUF);
 	if (error != 0)
-		goto detach;
+		goto error_attach;
 
 	error = ath_rx_init(sc, ATH_RXBUF);
 	if (error != 0)
-		goto detach;
+		goto error_attach;
 
 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
 	/* Initialze h/w Rfkill */
@@ -1601,8 +1602,9 @@
 		INIT_DELAYED_WORK(&sc->rf_kill.rfkill_poll, ath_rfkill_poll);
 
 	/* Initialize s/w rfkill */
-	if (ath_init_sw_rfkill(sc))
-		goto detach;
+	error = ath_init_sw_rfkill(sc);
+	if (error)
+		goto error_attach;
 #endif
 
 	error = ieee80211_register_hw(hw);
@@ -1611,8 +1613,16 @@
 	ath_init_leds(sc);
 
 	return 0;
-detach:
-	ath_detach(sc);
+
+error_attach:
+	/* cleanup tx queues */
+	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+		if (ATH_TXQ_SETUP(sc, i))
+			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
+
+	ath9k_hw_detach(sc->sc_ah);
+	ath9k_exit_debug(sc);
+
 	return error;
 }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 36bafeb..129e2d3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -3868,7 +3868,7 @@
 	}
 	err = iwl_eeprom_check_version(priv);
 	if (err)
-		goto out_iounmap;
+		goto out_free_eeprom;
 
 	/* extract MAC Address */
 	iwl_eeprom_get_mac(priv, priv->mac_addr);
@@ -3945,6 +3945,8 @@
 	return 0;
 
  out_remove_sysfs:
+	destroy_workqueue(priv->workqueue);
+	priv->workqueue = NULL;
 	sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
  out_uninit_drv:
 	iwl_uninit_drv(priv);
@@ -3953,8 +3955,8 @@
  out_iounmap:
 	pci_iounmap(pdev, priv->hw_base);
  out_pci_release_regions:
-	pci_release_regions(pdev);
 	pci_set_drvdata(pdev, NULL);
+	pci_release_regions(pdev);
  out_pci_disable_device:
 	pci_disable_device(pdev);
  out_ieee80211_free_hw:
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index b0ee86c..ab13ff2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -148,7 +148,7 @@
 		pci_unmap_single(dev,
 				pci_unmap_addr(&txq->cmd[index]->meta, mapping),
 				pci_unmap_len(&txq->cmd[index]->meta, len),
-				PCI_DMA_TODEVICE);
+				PCI_DMA_BIDIRECTIONAL);
 
 	/* Unmap chunks, if any. */
 	for (i = 1; i < num_tbs; i++) {
@@ -964,7 +964,7 @@
 	 * within command buffer array. */
 	txcmd_phys = pci_map_single(priv->pci_dev,
 				    out_cmd, sizeof(struct iwl_cmd),
-				    PCI_DMA_TODEVICE);
+				    PCI_DMA_BIDIRECTIONAL);
 	pci_unmap_addr_set(&out_cmd->meta, mapping, txcmd_phys);
 	pci_unmap_len_set(&out_cmd->meta, len, sizeof(struct iwl_cmd));
 	/* Add buffer containing Tx command and MAC(!) header to TFD's
@@ -1115,7 +1115,7 @@
 			IWL_MAX_SCAN_SIZE : sizeof(struct iwl_cmd);
 
 	phys_addr = pci_map_single(priv->pci_dev, out_cmd,
-				   len, PCI_DMA_TODEVICE);
+				   len, PCI_DMA_BIDIRECTIONAL);
 	pci_unmap_addr_set(&out_cmd->meta, mapping, phys_addr);
 	pci_unmap_len_set(&out_cmd->meta, len, len);
 	phys_addr += offsetof(struct iwl_cmd, hdr);
@@ -1212,7 +1212,7 @@
 	pci_unmap_single(priv->pci_dev,
 		pci_unmap_addr(&txq->cmd[cmd_idx]->meta, mapping),
 		pci_unmap_len(&txq->cmd[cmd_idx]->meta, len),
-		PCI_DMA_TODEVICE);
+		PCI_DMA_BIDIRECTIONAL);
 
 	for (idx = iwl_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx;
 	     q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 93be74a..57dd34e 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -7911,7 +7911,7 @@
 				CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
 	if (err < 0) {
 		IWL_DEBUG_INFO("Failed to init the card\n");
-		goto out_remove_sysfs;
+		goto out_iounmap;
 	}
 
 	/***********************
@@ -7921,7 +7921,7 @@
 	err = iwl3945_eeprom_init(priv);
 	if (err) {
 		IWL_ERROR("Unable to init EEPROM\n");
-		goto out_remove_sysfs;
+		goto out_iounmap;
 	}
 	/* MAC Address location in EEPROM same for 3945/4965 */
 	get_eeprom_mac(priv, priv->mac_addr);
@@ -7975,7 +7975,7 @@
 	err = iwl3945_init_channel_map(priv);
 	if (err) {
 		IWL_ERROR("initializing regulatory failed: %d\n", err);
-		goto out_release_irq;
+		goto out_unset_hw_setting;
 	}
 
 	err = iwl3945_init_geos(priv);
@@ -8045,25 +8045,22 @@
 	return 0;
 
  out_remove_sysfs:
+	destroy_workqueue(priv->workqueue);
+	priv->workqueue = NULL;
 	sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
  out_free_geos:
 	iwl3945_free_geos(priv);
  out_free_channel_map:
 	iwl3945_free_channel_map(priv);
-
-
- out_release_irq:
-	destroy_workqueue(priv->workqueue);
-	priv->workqueue = NULL;
+ out_unset_hw_setting:
 	iwl3945_unset_hw_setting(priv);
-
  out_iounmap:
 	pci_iounmap(pdev, priv->hw_base);
  out_pci_release_regions:
 	pci_release_regions(pdev);
  out_pci_disable_device:
-	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
+	pci_disable_device(pdev);
  out_ieee80211_free_hw:
 	ieee80211_free_hw(priv->hw);
  out:
diff --git a/drivers/net/wireless/libertas/ethtool.c b/drivers/net/wireless/libertas/ethtool.c
index 61d2f50..b118a35 100644
--- a/drivers/net/wireless/libertas/ethtool.c
+++ b/drivers/net/wireless/libertas/ethtool.c
@@ -23,7 +23,7 @@
 static void lbs_ethtool_get_drvinfo(struct net_device *dev,
 					 struct ethtool_drvinfo *info)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 
 	snprintf(info->fw_version, 32, "%u.%u.%u.p%u",
 		priv->fwrelease >> 24 & 0xff,
@@ -47,7 +47,7 @@
 static int lbs_ethtool_get_eeprom(struct net_device *dev,
                                   struct ethtool_eeprom *eeprom, u8 * bytes)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	struct cmd_ds_802_11_eeprom_access cmd;
 	int ret;
 
@@ -76,7 +76,7 @@
 static void lbs_ethtool_get_stats(struct net_device *dev,
 				  struct ethtool_stats *stats, uint64_t *data)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	struct cmd_ds_mesh_access mesh_access;
 	int ret;
 
@@ -113,7 +113,7 @@
 
 static int lbs_ethtool_get_sset_count(struct net_device *dev, int sset)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 
 	if (sset == ETH_SS_STATS && dev == priv->mesh_dev)
 		return MESH_STATS_NUM;
@@ -143,7 +143,7 @@
 static void lbs_ethtool_get_wol(struct net_device *dev,
 				struct ethtool_wolinfo *wol)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 
 	if (priv->wol_criteria == 0xffffffff) {
 		/* Interface driver didn't configure wake */
@@ -166,7 +166,7 @@
 static int lbs_ethtool_set_wol(struct net_device *dev,
 			       struct ethtool_wolinfo *wol)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	uint32_t criteria = 0;
 
 	if (priv->wol_criteria == 0xffffffff && wol->wolopts)
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index 2fc637a..ea3dc038 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -59,7 +59,7 @@
 static ssize_t if_usb_firmware_set(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t count)
 {
-	struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
 	struct if_usb_card *cardp = priv->card;
 	char fwname[FIRMWARE_NAME_MAX];
 	int ret;
@@ -86,7 +86,7 @@
 static ssize_t if_usb_boot2_set(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t count)
 {
-	struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
 	struct if_usb_card *cardp = priv->card;
 	char fwname[FIRMWARE_NAME_MAX];
 	int ret;
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 4e0007d..f76623e 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -222,7 +222,7 @@
 static ssize_t lbs_anycast_get(struct device *dev,
 		struct device_attribute *attr, char * buf)
 {
-	struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
 	struct cmd_ds_mesh_access mesh_access;
 	int ret;
 
@@ -241,7 +241,7 @@
 static ssize_t lbs_anycast_set(struct device *dev,
 		struct device_attribute *attr, const char * buf, size_t count)
 {
-	struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
 	struct cmd_ds_mesh_access mesh_access;
 	uint32_t datum;
 	int ret;
@@ -263,7 +263,7 @@
 static ssize_t lbs_prb_rsp_limit_get(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
-	struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
 	struct cmd_ds_mesh_access mesh_access;
 	int ret;
 	u32 retry_limit;
@@ -286,7 +286,7 @@
 static ssize_t lbs_prb_rsp_limit_set(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t count)
 {
-	struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
 	struct cmd_ds_mesh_access mesh_access;
 	int ret;
 	unsigned long retry_limit;
@@ -321,7 +321,7 @@
 static ssize_t lbs_rtap_get(struct device *dev,
 		struct device_attribute *attr, char * buf)
 {
-	struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
 	return snprintf(buf, 5, "0x%X\n", priv->monitormode);
 }
 
@@ -332,7 +332,7 @@
 		struct device_attribute *attr, const char * buf, size_t count)
 {
 	int monitor_mode;
-	struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
 
 	sscanf(buf, "%x", &monitor_mode);
 	if (monitor_mode) {
@@ -383,7 +383,7 @@
 static ssize_t lbs_mesh_get(struct device *dev,
 		struct device_attribute *attr, char * buf)
 {
-	struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
 	return snprintf(buf, 5, "0x%X\n", !!priv->mesh_dev);
 }
 
@@ -393,7 +393,7 @@
 static ssize_t lbs_mesh_set(struct device *dev,
 		struct device_attribute *attr, const char * buf, size_t count)
 {
-	struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
 	int enable;
 	int ret, action = CMD_ACT_MESH_CONFIG_STOP;
 
@@ -452,7 +452,7 @@
  */
 static int lbs_dev_open(struct net_device *dev)
 {
-	struct lbs_private *priv = netdev_priv(dev) ;
+	struct lbs_private *priv = dev->ml_priv;
 	int ret = 0;
 
 	lbs_deb_enter(LBS_DEB_NET);
@@ -521,7 +521,7 @@
  */
 static int lbs_eth_stop(struct net_device *dev)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 
 	lbs_deb_enter(LBS_DEB_NET);
 
@@ -538,7 +538,7 @@
 
 static void lbs_tx_timeout(struct net_device *dev)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 
 	lbs_deb_enter(LBS_DEB_TX);
 
@@ -590,7 +590,7 @@
  */
 static struct net_device_stats *lbs_get_stats(struct net_device *dev)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 
 	lbs_deb_enter(LBS_DEB_NET);
 	return &priv->stats;
@@ -599,7 +599,7 @@
 static int lbs_set_mac_address(struct net_device *dev, void *addr)
 {
 	int ret = 0;
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	struct sockaddr *phwaddr = addr;
 	struct cmd_ds_802_11_mac_address cmd;
 
@@ -732,7 +732,7 @@
 
 static void lbs_set_multicast_list(struct net_device *dev)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 
 	schedule_work(&priv->mcast_work);
 }
@@ -748,7 +748,7 @@
 static int lbs_thread(void *data)
 {
 	struct net_device *dev = data;
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	wait_queue_t wait;
 
 	lbs_deb_enter(LBS_DEB_THREAD);
@@ -1184,6 +1184,7 @@
 		goto done;
 	}
 	priv = netdev_priv(dev);
+	dev->ml_priv = priv;
 
 	if (lbs_init_adapter(priv)) {
 		lbs_pr_err("failed to initialize adapter structure.\n");
diff --git a/drivers/net/wireless/libertas/persistcfg.c b/drivers/net/wireless/libertas/persistcfg.c
index d42b7a5..18fe29f 100644
--- a/drivers/net/wireless/libertas/persistcfg.c
+++ b/drivers/net/wireless/libertas/persistcfg.c
@@ -18,7 +18,7 @@
 static int mesh_get_default_parameters(struct device *dev,
 				       struct mrvl_mesh_defaults *defs)
 {
-	struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
 	struct cmd_ds_mesh_config cmd;
 	int ret;
 
@@ -57,7 +57,7 @@
 static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr,
 			    const char *buf, size_t count)
 {
-	struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
 	struct cmd_ds_mesh_config cmd;
 	uint32_t datum;
 	int ret;
@@ -100,7 +100,7 @@
 static ssize_t boottime_set(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t count)
 {
-	struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
 	struct cmd_ds_mesh_config cmd;
 	uint32_t datum;
 	int ret;
@@ -152,7 +152,7 @@
 static ssize_t channel_set(struct device *dev, struct device_attribute *attr,
 			   const char *buf, size_t count)
 {
-	struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
 	struct cmd_ds_mesh_config cmd;
 	uint32_t datum;
 	int ret;
@@ -210,7 +210,7 @@
 	struct cmd_ds_mesh_config cmd;
 	struct mrvl_mesh_defaults defs;
 	struct mrvl_meshie *ie;
-	struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
 	int len;
 	int ret;
 
@@ -269,7 +269,7 @@
 	struct cmd_ds_mesh_config cmd;
 	struct mrvl_mesh_defaults defs;
 	struct mrvl_meshie *ie;
-	struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
 	uint32_t datum;
 	int ret;
 
@@ -323,7 +323,7 @@
 	struct cmd_ds_mesh_config cmd;
 	struct mrvl_mesh_defaults defs;
 	struct mrvl_meshie *ie;
-	struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
 	uint32_t datum;
 	int ret;
 
@@ -377,7 +377,7 @@
 	struct cmd_ds_mesh_config cmd;
 	struct mrvl_mesh_defaults defs;
 	struct mrvl_meshie *ie;
-	struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
 	uint32_t datum;
 	int ret;
 
diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index 57f6c12..9014950 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c
@@ -945,7 +945,7 @@
 		 union iwreq_data *wrqu, char *extra)
 {
 	DECLARE_SSID_BUF(ssid);
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	int ret = 0;
 
 	lbs_deb_enter(LBS_DEB_WEXT);
@@ -1008,7 +1008,7 @@
 		 struct iw_point *dwrq, char *extra)
 {
 #define SCAN_ITEM_SIZE 128
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	int err = 0;
 	char *ev = extra;
 	char *stop = ev + dwrq->length;
diff --git a/drivers/net/wireless/libertas/tx.c b/drivers/net/wireless/libertas/tx.c
index dac4626..68bec31 100644
--- a/drivers/net/wireless/libertas/tx.c
+++ b/drivers/net/wireless/libertas/tx.c
@@ -60,7 +60,7 @@
 int lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	unsigned long flags;
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	struct txpd *txpd;
 	char *p802x_hdr;
 	uint16_t pkt_len;
diff --git a/drivers/net/wireless/libertas/wext.c b/drivers/net/wireless/libertas/wext.c
index c6102e0..f16d136 100644
--- a/drivers/net/wireless/libertas/wext.c
+++ b/drivers/net/wireless/libertas/wext.c
@@ -163,7 +163,7 @@
 static int lbs_get_freq(struct net_device *dev, struct iw_request_info *info,
 			 struct iw_freq *fwrq, char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	struct chan_freq_power *cfp;
 
 	lbs_deb_enter(LBS_DEB_WEXT);
@@ -189,7 +189,7 @@
 static int lbs_get_wap(struct net_device *dev, struct iw_request_info *info,
 			struct sockaddr *awrq, char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 
 	lbs_deb_enter(LBS_DEB_WEXT);
 
@@ -207,7 +207,7 @@
 static int lbs_set_nick(struct net_device *dev, struct iw_request_info *info,
 			 struct iw_point *dwrq, char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 
 	lbs_deb_enter(LBS_DEB_WEXT);
 
@@ -231,7 +231,7 @@
 static int lbs_get_nick(struct net_device *dev, struct iw_request_info *info,
 			 struct iw_point *dwrq, char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 
 	lbs_deb_enter(LBS_DEB_WEXT);
 
@@ -248,7 +248,7 @@
 static int mesh_get_nick(struct net_device *dev, struct iw_request_info *info,
 			 struct iw_point *dwrq, char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 
 	lbs_deb_enter(LBS_DEB_WEXT);
 
@@ -273,7 +273,7 @@
 			struct iw_param *vwrq, char *extra)
 {
 	int ret = 0;
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	u32 val = vwrq->value;
 
 	lbs_deb_enter(LBS_DEB_WEXT);
@@ -293,7 +293,7 @@
 static int lbs_get_rts(struct net_device *dev, struct iw_request_info *info,
 			struct iw_param *vwrq, char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	int ret = 0;
 	u16 val = 0;
 
@@ -315,7 +315,7 @@
 static int lbs_set_frag(struct net_device *dev, struct iw_request_info *info,
 			 struct iw_param *vwrq, char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	int ret = 0;
 	u32 val = vwrq->value;
 
@@ -336,7 +336,7 @@
 static int lbs_get_frag(struct net_device *dev, struct iw_request_info *info,
 			 struct iw_param *vwrq, char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	int ret = 0;
 	u16 val = 0;
 
@@ -359,7 +359,7 @@
 static int lbs_get_mode(struct net_device *dev,
 			 struct iw_request_info *info, u32 * uwrq, char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 
 	lbs_deb_enter(LBS_DEB_WEXT);
 
@@ -385,7 +385,7 @@
 			  struct iw_request_info *info,
 			  struct iw_param *vwrq, char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	s16 curlevel = 0;
 	int ret = 0;
 
@@ -418,7 +418,7 @@
 static int lbs_set_retry(struct net_device *dev, struct iw_request_info *info,
 			  struct iw_param *vwrq, char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	int ret = 0;
 	u16 slimit = 0, llimit = 0;
 
@@ -466,7 +466,7 @@
 static int lbs_get_retry(struct net_device *dev, struct iw_request_info *info,
 			  struct iw_param *vwrq, char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	int ret = 0;
 	u16 val = 0;
 
@@ -542,7 +542,7 @@
 			  struct iw_point *dwrq, char *extra)
 {
 	int i, j;
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	struct iw_range *range = (struct iw_range *)extra;
 	struct chan_freq_power *cfp;
 	u8 rates[MAX_RATES + 1];
@@ -708,7 +708,7 @@
 static int lbs_set_power(struct net_device *dev, struct iw_request_info *info,
 			  struct iw_param *vwrq, char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 
 	lbs_deb_enter(LBS_DEB_WEXT);
 
@@ -758,7 +758,7 @@
 static int lbs_get_power(struct net_device *dev, struct iw_request_info *info,
 			  struct iw_param *vwrq, char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 
 	lbs_deb_enter(LBS_DEB_WEXT);
 
@@ -781,7 +781,7 @@
 		EXCELLENT = 95,
 		PERFECT = 100
 	};
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	u32 rssi_qual;
 	u32 tx_qual;
 	u32 quality = 0;
@@ -886,7 +886,7 @@
 		  struct iw_freq *fwrq, char *extra)
 {
 	int ret = -EINVAL;
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	struct chan_freq_power *cfp;
 	struct assoc_request * assoc_req;
 
@@ -943,7 +943,7 @@
 			     struct iw_request_info *info,
 			     struct iw_freq *fwrq, char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	struct chan_freq_power *cfp;
 	int ret = -EINVAL;
 
@@ -994,7 +994,7 @@
 static int lbs_set_rate(struct net_device *dev, struct iw_request_info *info,
 		  struct iw_param *vwrq, char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	u8 new_rate = 0;
 	int ret = -EINVAL;
 	u8 rates[MAX_RATES + 1];
@@ -1054,7 +1054,7 @@
 static int lbs_get_rate(struct net_device *dev, struct iw_request_info *info,
 		  struct iw_param *vwrq, char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 
 	lbs_deb_enter(LBS_DEB_WEXT);
 
@@ -1079,7 +1079,7 @@
 		  struct iw_request_info *info, u32 * uwrq, char *extra)
 {
 	int ret = 0;
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	struct assoc_request * assoc_req;
 
 	lbs_deb_enter(LBS_DEB_WEXT);
@@ -1124,7 +1124,7 @@
 			   struct iw_request_info *info,
 			   struct iw_point *dwrq, u8 * extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
 
 	lbs_deb_enter(LBS_DEB_WEXT);
@@ -1319,7 +1319,7 @@
 		    struct iw_point *dwrq, char *extra)
 {
 	int ret = 0;
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	struct assoc_request * assoc_req;
 	u16 is_default = 0, index = 0, set_tx_key = 0;
 
@@ -1395,7 +1395,7 @@
 			      char *extra)
 {
 	int ret = -EINVAL;
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
 	int index, max_key_len;
 
@@ -1501,7 +1501,7 @@
 			      char *extra)
 {
 	int ret = 0;
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
 	int alg = ext->alg;
 	struct assoc_request * assoc_req;
@@ -1639,7 +1639,7 @@
 			  struct iw_point *dwrq,
 			  char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	int ret = 0;
 	struct assoc_request * assoc_req;
 
@@ -1685,7 +1685,7 @@
 			  char *extra)
 {
 	int ret = 0;
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 
 	lbs_deb_enter(LBS_DEB_WEXT);
 
@@ -1713,7 +1713,7 @@
 			 struct iw_param *dwrq,
 			 char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	struct assoc_request * assoc_req;
 	int ret = 0;
 	int updated = 0;
@@ -1816,7 +1816,7 @@
 			 char *extra)
 {
 	int ret = 0;
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 
 	lbs_deb_enter(LBS_DEB_WEXT);
 
@@ -1857,7 +1857,7 @@
 		   struct iw_param *vwrq, char *extra)
 {
 	int ret = 0;
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	s16 dbm = (s16) vwrq->value;
 
 	lbs_deb_enter(LBS_DEB_WEXT);
@@ -1936,7 +1936,7 @@
 static int lbs_get_essid(struct net_device *dev, struct iw_request_info *info,
 		   struct iw_point *dwrq, char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 
 	lbs_deb_enter(LBS_DEB_WEXT);
 
@@ -1971,7 +1971,7 @@
 static int lbs_set_essid(struct net_device *dev, struct iw_request_info *info,
 		   struct iw_point *dwrq, char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	int ret = 0;
 	u8 ssid[IW_ESSID_MAX_SIZE];
 	u8 ssid_len = 0;
@@ -2040,7 +2040,7 @@
 			      struct iw_request_info *info,
 			      struct iw_point *dwrq, char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 
 	lbs_deb_enter(LBS_DEB_WEXT);
 
@@ -2058,7 +2058,7 @@
 			      struct iw_request_info *info,
 			      struct iw_point *dwrq, char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	int ret = 0;
 
 	lbs_deb_enter(LBS_DEB_WEXT);
@@ -2102,7 +2102,7 @@
 static int lbs_set_wap(struct net_device *dev, struct iw_request_info *info,
 		 struct sockaddr *awrq, char *extra)
 {
-	struct lbs_private *priv = netdev_priv(dev);
+	struct lbs_private *priv = dev->ml_priv;
 	struct assoc_request * assoc_req;
 	int ret = 0;
 
diff --git a/drivers/net/wireless/orinoco/orinoco.c b/drivers/net/wireless/orinoco/orinoco.c
index 45a04fa..067d1a9 100644
--- a/drivers/net/wireless/orinoco/orinoco.c
+++ b/drivers/net/wireless/orinoco/orinoco.c
@@ -3157,8 +3157,20 @@
 
 	return NOTIFY_DONE;
 }
+
+static void orinoco_register_pm_notifier(struct orinoco_private *priv)
+{
+	priv->pm_notifier.notifier_call = orinoco_pm_notifier;
+	register_pm_notifier(&priv->pm_notifier);
+}
+
+static void orinoco_unregister_pm_notifier(struct orinoco_private *priv)
+{
+	unregister_pm_notifier(&priv->pm_notifier);
+}
 #else /* !PM_SLEEP || HERMES_CACHE_FW_ON_INIT */
-#define orinoco_pm_notifier NULL
+#define orinoco_register_pm_notifier(priv) do { } while(0)
+#define orinoco_unregister_pm_notifier(priv) do { } while(0)
 #endif
 
 /********************************************************************/
@@ -3648,8 +3660,7 @@
 	priv->cached_fw = NULL;
 
 	/* Register PM notifiers */
-	priv->pm_notifier.notifier_call = orinoco_pm_notifier;
-	register_pm_notifier(&priv->pm_notifier);
+	orinoco_register_pm_notifier(priv);
 
 	return dev;
 }
@@ -3673,7 +3684,7 @@
 		kfree(rx_data);
 	}
 
-	unregister_pm_notifier(&priv->pm_notifier);
+	orinoco_unregister_pm_notifier(priv);
 	orinoco_uncache_fw(priv);
 
 	priv->wpa_ie_len = 0;
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 34561e6..f170106 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -710,10 +710,11 @@
 					   __le32 req_id)
 {
 	struct p54_common *priv = dev->priv;
-	struct sk_buff *entry = priv->tx_queue.next;
+	struct sk_buff *entry;
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
+	entry = priv->tx_queue.next;
 	while (entry != (struct sk_buff *)&priv->tx_queue) {
 		struct p54_hdr *hdr = (struct p54_hdr *) entry->data;
 
@@ -732,7 +733,7 @@
 	struct p54_common *priv = dev->priv;
 	struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
 	struct p54_frame_sent *payload = (struct p54_frame_sent *) hdr->data;
-	struct sk_buff *entry = (struct sk_buff *) priv->tx_queue.next;
+	struct sk_buff *entry;
 	u32 addr = le32_to_cpu(hdr->req_id) - priv->headroom;
 	struct memrecord *range = NULL;
 	u32 freed = 0;
@@ -741,6 +742,7 @@
 	int count, idx;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
+	entry = (struct sk_buff *) priv->tx_queue.next;
 	while (entry != (struct sk_buff *)&priv->tx_queue) {
 		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
 		struct p54_hdr *entry_hdr;
@@ -976,7 +978,7 @@
 			       struct p54_hdr *data, u32 len)
 {
 	struct p54_common *priv = dev->priv;
-	struct sk_buff *entry = priv->tx_queue.next;
+	struct sk_buff *entry;
 	struct sk_buff *target_skb = NULL;
 	struct ieee80211_tx_info *info;
 	struct memrecord *range;
@@ -1014,6 +1016,7 @@
 		}
 	}
 
+	entry = priv->tx_queue.next;
 	while (left--) {
 		u32 hole_size;
 		info = IEEE80211_SKB_CB(entry);
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index af6b584..3e2ac2b 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1952,6 +1952,8 @@
 	{ USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) },
 	{ USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) },
 	{ USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) },
+	/* CNet */
+	{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* Conceptronic */
 	{ USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* D-LINK */
@@ -1976,14 +1978,20 @@
 	{ USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) },
 	{ USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) },
 	{ USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
+	/* Sagem */
+	{ USB_DEVICE(0x079b, 0x004b), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* Siemens */
 	{ USB_DEVICE(0x0681, 0x3c06), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* SMC */
 	{ USB_DEVICE(0x0707, 0xee13), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* Spairon */
 	{ USB_DEVICE(0x114b, 0x0110), USB_DEVICE_DATA(&rt2500usb_ops) },
+	/* SURECOM */
+	{ USB_DEVICE(0x0769, 0x11f3), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* Trust */
 	{ USB_DEVICE(0x0eb0, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
+	/* VTech */
+	{ USB_DEVICE(0x0f88, 0x3012), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* Zinwell */
 	{ USB_DEVICE(0x5a57, 0x0260), USB_DEVICE_DATA(&rt2500usb_ops) },
 	{ 0, }
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 96a8d69..cefee1b 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2281,7 +2281,18 @@
  */
 static struct usb_device_id rt73usb_device_table[] = {
 	/* AboCom */
+	{ USB_DEVICE(0x07b8, 0xb21b), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x07b8, 0xb21c), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x07b8, 0xb21d), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x07b8, 0xb21e), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x07b8, 0xb21f), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* AL */
+	{ USB_DEVICE(0x14b2, 0x3c10), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* Amigo */
+	{ USB_DEVICE(0x148f, 0x9021), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x0eb0, 0x9021), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* AMIT  */
+	{ USB_DEVICE(0x18c5, 0x0002), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Askey */
 	{ USB_DEVICE(0x1690, 0x0722), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* ASUS */
@@ -2294,7 +2305,9 @@
 	{ USB_DEVICE(0x050d, 0x905c), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Billionton */
 	{ USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x08dd, 0x0120), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Buffalo */
+	{ USB_DEVICE(0x0411, 0x00d8), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* CNet */
 	{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
@@ -2308,6 +2321,11 @@
 	{ USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x07d1, 0x3c06), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* Edimax */
+	{ USB_DEVICE(0x7392, 0x7318), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x7392, 0x7618), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* EnGenius */
+	{ USB_DEVICE(0x1740, 0x3701), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Gemtek */
 	{ USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Gigabyte */
@@ -2328,22 +2346,34 @@
 	{ USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Ralink */
+	{ USB_DEVICE(0x04bb, 0x093d), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Qcom */
 	{ USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x18e8, 0x6238), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* Samsung */
+	{ USB_DEVICE(0x04e8, 0x4471), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Senao */
 	{ USB_DEVICE(0x1740, 0x7100), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Sitecom */
-	{ USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x0024), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x0027), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x002f), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0df6, 0x90ac), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Surecom */
 	{ USB_DEVICE(0x0769, 0x31f3), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* Philips */
+	{ USB_DEVICE(0x0471, 0x200a), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Planex */
 	{ USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* Zcom */
+	{ USB_DEVICE(0x0cde, 0x001c), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* ZyXEL */
+	{ USB_DEVICE(0x0586, 0x3415), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ 0, }
 };
 
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index 22bc07e..f4747a1 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -48,6 +48,10 @@
 	{USB_DEVICE(0x0bda, 0x8189), .driver_info = DEVICE_RTL8187B},
 	{USB_DEVICE(0x0bda, 0x8197), .driver_info = DEVICE_RTL8187B},
 	{USB_DEVICE(0x0bda, 0x8198), .driver_info = DEVICE_RTL8187B},
+	/* Surecom */
+	{USB_DEVICE(0x0769, 0x11F2), .driver_info = DEVICE_RTL8187},
+	/* Logitech */
+	{USB_DEVICE(0x0789, 0x010C), .driver_info = DEVICE_RTL8187},
 	/* Netgear */
 	{USB_DEVICE(0x0846, 0x6100), .driver_info = DEVICE_RTL8187},
 	{USB_DEVICE(0x0846, 0x6a00), .driver_info = DEVICE_RTL8187},
@@ -57,8 +61,16 @@
 	/* Sitecom */
 	{USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187},
 	{USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B},
+	/* Sphairon Access Systems GmbH */
+	{USB_DEVICE(0x114B, 0x0150), .driver_info = DEVICE_RTL8187},
+	/* Dick Smith Electronics */
+	{USB_DEVICE(0x1371, 0x9401), .driver_info = DEVICE_RTL8187},
 	/* Abocom */
 	{USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187},
+	/* Qcom */
+	{USB_DEVICE(0x18E8, 0x6232), .driver_info = DEVICE_RTL8187},
+	/* AirLive */
+	{USB_DEVICE(0x1b75, 0x8187), .driver_info = DEVICE_RTL8187},
 	{}
 };
 
diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c
index f5a662a..26c536b 100644
--- a/drivers/pci/dmar.c
+++ b/drivers/pci/dmar.c
@@ -330,6 +330,14 @@
 	entry_header = (struct acpi_dmar_header *)(dmar + 1);
 	while (((unsigned long)entry_header) <
 			(((unsigned long)dmar) + dmar_tbl->length)) {
+		/* Avoid looping forever on bad ACPI tables */
+		if (entry_header->length == 0) {
+			printk(KERN_WARNING PREFIX
+				"Invalid 0-length structure\n");
+			ret = -EINVAL;
+			break;
+		}
+
 		dmar_table_print_dmar_entry(entry_header);
 
 		switch (entry_header->type) {
@@ -491,7 +499,7 @@
 	int map_size;
 	u32 ver;
 	static int iommu_allocated = 0;
-	int agaw;
+	int agaw = 0;
 
 	iommu = kzalloc(sizeof(*iommu), GFP_KERNEL);
 	if (!iommu)
@@ -507,6 +515,7 @@
 	iommu->cap = dmar_readq(iommu->reg + DMAR_CAP_REG);
 	iommu->ecap = dmar_readq(iommu->reg + DMAR_ECAP_REG);
 
+#ifdef CONFIG_DMAR
 	agaw = iommu_calculate_agaw(iommu);
 	if (agaw < 0) {
 		printk(KERN_ERR
@@ -514,6 +523,7 @@
 			iommu->seq_id);
 		goto error;
 	}
+#endif
 	iommu->agaw = agaw;
 
 	/* the registers might be more than one page */
@@ -571,19 +581,49 @@
 	}
 }
 
+static int qi_check_fault(struct intel_iommu *iommu, int index)
+{
+	u32 fault;
+	int head;
+	struct q_inval *qi = iommu->qi;
+	int wait_index = (index + 1) % QI_LENGTH;
+
+	fault = readl(iommu->reg + DMAR_FSTS_REG);
+
+	/*
+	 * If IQE happens, the head points to the descriptor associated
+	 * with the error. No new descriptors are fetched until the IQE
+	 * is cleared.
+	 */
+	if (fault & DMA_FSTS_IQE) {
+		head = readl(iommu->reg + DMAR_IQH_REG);
+		if ((head >> 4) == index) {
+			memcpy(&qi->desc[index], &qi->desc[wait_index],
+					sizeof(struct qi_desc));
+			__iommu_flush_cache(iommu, &qi->desc[index],
+					sizeof(struct qi_desc));
+			writel(DMA_FSTS_IQE, iommu->reg + DMAR_FSTS_REG);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
 /*
  * Submit the queued invalidation descriptor to the remapping
  * hardware unit and wait for its completion.
  */
-void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu)
+int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu)
 {
+	int rc = 0;
 	struct q_inval *qi = iommu->qi;
 	struct qi_desc *hw, wait_desc;
 	int wait_index, index;
 	unsigned long flags;
 
 	if (!qi)
-		return;
+		return 0;
 
 	hw = qi->desc;
 
@@ -601,7 +641,8 @@
 
 	hw[index] = *desc;
 
-	wait_desc.low = QI_IWD_STATUS_DATA(2) | QI_IWD_STATUS_WRITE | QI_IWD_TYPE;
+	wait_desc.low = QI_IWD_STATUS_DATA(QI_DONE) |
+			QI_IWD_STATUS_WRITE | QI_IWD_TYPE;
 	wait_desc.high = virt_to_phys(&qi->desc_status[wait_index]);
 
 	hw[wait_index] = wait_desc;
@@ -612,13 +653,11 @@
 	qi->free_head = (qi->free_head + 2) % QI_LENGTH;
 	qi->free_cnt -= 2;
 
-	spin_lock(&iommu->register_lock);
 	/*
 	 * update the HW tail register indicating the presence of
 	 * new descriptors.
 	 */
 	writel(qi->free_head << 4, iommu->reg + DMAR_IQT_REG);
-	spin_unlock(&iommu->register_lock);
 
 	while (qi->desc_status[wait_index] != QI_DONE) {
 		/*
@@ -628,15 +667,21 @@
 		 * a deadlock where the interrupt context can wait indefinitely
 		 * for free slots in the queue.
 		 */
+		rc = qi_check_fault(iommu, index);
+		if (rc)
+			goto out;
+
 		spin_unlock(&qi->q_lock);
 		cpu_relax();
 		spin_lock(&qi->q_lock);
 	}
-
-	qi->desc_status[index] = QI_DONE;
+out:
+	qi->desc_status[index] = qi->desc_status[wait_index] = QI_DONE;
 
 	reclaim_free_desc(qi);
 	spin_unlock_irqrestore(&qi->q_lock, flags);
+
+	return rc;
 }
 
 /*
@@ -649,13 +694,13 @@
 	desc.low = QI_IEC_TYPE;
 	desc.high = 0;
 
+	/* should never fail */
 	qi_submit_sync(&desc, iommu);
 }
 
 int qi_flush_context(struct intel_iommu *iommu, u16 did, u16 sid, u8 fm,
 		     u64 type, int non_present_entry_flush)
 {
-
 	struct qi_desc desc;
 
 	if (non_present_entry_flush) {
@@ -669,10 +714,7 @@
 			| QI_CC_GRAN(type) | QI_CC_TYPE;
 	desc.high = 0;
 
-	qi_submit_sync(&desc, iommu);
-
-	return 0;
-
+	return qi_submit_sync(&desc, iommu);
 }
 
 int qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr,
@@ -702,10 +744,7 @@
 	desc.high = QI_IOTLB_ADDR(addr) | QI_IOTLB_IH(ih)
 		| QI_IOTLB_AM(size_order);
 
-	qi_submit_sync(&desc, iommu);
-
-	return 0;
-
+	return qi_submit_sync(&desc, iommu);
 }
 
 /*
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index eacfb13..9aa4fe1 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -143,7 +143,7 @@
 
 config HOTPLUG_PCI_RPA
 	tristate "RPA PCI Hotplug driver"
-	depends on PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE
+	depends on PPC_PSERIES && EEH && !HOTPLUG_PCI_FAKE
 	help
 	  Say Y here if you have a RPA system that supports PCI Hotplug.
 
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index db85284..39ae375 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -111,6 +111,7 @@
 	int cmd_busy;
 	unsigned int no_cmd_complete:1;
 	unsigned int link_active_reporting:1;
+	unsigned int notification_enabled:1;
 };
 
 #define INT_BUTTON_IGNORE		0
@@ -170,6 +171,7 @@
 extern int pciehp_unconfigure_device(struct slot *p_slot);
 extern void pciehp_queue_pushbutton_work(struct work_struct *work);
 struct controller *pcie_init(struct pcie_device *dev);
+int pcie_init_notification(struct controller *ctrl);
 int pciehp_enable_slot(struct slot *p_slot);
 int pciehp_disable_slot(struct slot *p_slot);
 int pcie_enable_notification(struct controller *ctrl);
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index c248554..681e391 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -434,6 +434,13 @@
 		goto err_out_release_ctlr;
 	}
 
+	/* Enable events after we have setup the data structures */
+	rc = pcie_init_notification(ctrl);
+	if (rc) {
+		ctrl_err(ctrl, "Notification initialization failed\n");
+		goto err_out_release_ctlr;
+	}
+
 	/* Check if slot is occupied */
 	t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
 	t_slot->hpc_ops->get_adapter_status(t_slot, &value);
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 71a8012..7a16c68 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -934,7 +934,7 @@
 		ctrl_warn(ctrl, "Cannot disable software notification\n");
 }
 
-static int pcie_init_notification(struct controller *ctrl)
+int pcie_init_notification(struct controller *ctrl)
 {
 	if (pciehp_request_irq(ctrl))
 		return -1;
@@ -942,13 +942,17 @@
 		pciehp_free_irq(ctrl);
 		return -1;
 	}
+	ctrl->notification_enabled = 1;
 	return 0;
 }
 
 static void pcie_shutdown_notification(struct controller *ctrl)
 {
-	pcie_disable_notification(ctrl);
-	pciehp_free_irq(ctrl);
+	if (ctrl->notification_enabled) {
+		pcie_disable_notification(ctrl);
+		pciehp_free_irq(ctrl);
+		ctrl->notification_enabled = 0;
+	}
 }
 
 static int pcie_init_slot(struct controller *ctrl)
@@ -1110,13 +1114,8 @@
 	if (pcie_init_slot(ctrl))
 		goto abort_ctrl;
 
-	if (pcie_init_notification(ctrl))
-		goto abort_slot;
-
 	return ctrl;
 
-abort_slot:
-	pcie_cleanup_slot(ctrl);
 abort_ctrl:
 	kfree(ctrl);
 abort:
diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c
index f78371b..45effc5 100644
--- a/drivers/pci/intr_remapping.c
+++ b/drivers/pci/intr_remapping.c
@@ -207,7 +207,7 @@
 	return index;
 }
 
-static void qi_flush_iec(struct intel_iommu *iommu, int index, int mask)
+static int qi_flush_iec(struct intel_iommu *iommu, int index, int mask)
 {
 	struct qi_desc desc;
 
@@ -215,7 +215,7 @@
 		   | QI_IEC_SELECTIVE;
 	desc.high = 0;
 
-	qi_submit_sync(&desc, iommu);
+	return qi_submit_sync(&desc, iommu);
 }
 
 int map_irq_to_irte_handle(int irq, u16 *sub_handle)
@@ -283,6 +283,7 @@
 
 int modify_irte(int irq, struct irte *irte_modified)
 {
+	int rc;
 	int index;
 	struct irte *irte;
 	struct intel_iommu *iommu;
@@ -303,14 +304,15 @@
 	set_64bit((unsigned long *)irte, irte_modified->low | (1 << 1));
 	__iommu_flush_cache(iommu, irte, sizeof(*irte));
 
-	qi_flush_iec(iommu, index, 0);
-
+	rc = qi_flush_iec(iommu, index, 0);
 	spin_unlock(&irq_2_ir_lock);
-	return 0;
+
+	return rc;
 }
 
 int flush_irte(int irq)
 {
+	int rc;
 	int index;
 	struct intel_iommu *iommu;
 	struct irq_2_iommu *irq_iommu;
@@ -326,10 +328,10 @@
 
 	index = irq_iommu->irte_index + irq_iommu->sub_handle;
 
-	qi_flush_iec(iommu, index, irq_iommu->irte_mask);
+	rc = qi_flush_iec(iommu, index, irq_iommu->irte_mask);
 	spin_unlock(&irq_2_ir_lock);
 
-	return 0;
+	return rc;
 }
 
 struct intel_iommu *map_ioapic_to_ir(int apic)
@@ -355,6 +357,7 @@
 
 int free_irte(int irq)
 {
+	int rc = 0;
 	int index, i;
 	struct irte *irte;
 	struct intel_iommu *iommu;
@@ -375,7 +378,7 @@
 	if (!irq_iommu->sub_handle) {
 		for (i = 0; i < (1 << irq_iommu->irte_mask); i++)
 			set_64bit((unsigned long *)irte, 0);
-		qi_flush_iec(iommu, index, irq_iommu->irte_mask);
+		rc = qi_flush_iec(iommu, index, irq_iommu->irte_mask);
 	}
 
 	irq_iommu->iommu = NULL;
@@ -385,7 +388,7 @@
 
 	spin_unlock(&irq_2_ir_lock);
 
-	return 0;
+	return rc;
 }
 
 static void iommu_set_intr_remapping(struct intel_iommu *iommu, int mode)
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index aac7006..3825750 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -108,6 +108,37 @@
 }
 #endif  /*  0  */
 
+
+static void set_device_error_reporting(struct pci_dev *dev, void *data)
+{
+	bool enable = *((bool *)data);
+
+	if (dev->pcie_type != PCIE_RC_PORT &&
+	    dev->pcie_type != PCIE_SW_UPSTREAM_PORT &&
+	    dev->pcie_type != PCIE_SW_DOWNSTREAM_PORT)
+		return;
+
+	if (enable)
+		pci_enable_pcie_error_reporting(dev);
+	else
+		pci_disable_pcie_error_reporting(dev);
+}
+
+/**
+ * set_downstream_devices_error_reporting - enable/disable the error reporting  bits on the root port and its downstream ports.
+ * @dev: pointer to root port's pci_dev data structure
+ * @enable: true = enable error reporting, false = disable error reporting.
+ */
+static void set_downstream_devices_error_reporting(struct pci_dev *dev,
+						   bool enable)
+{
+	set_device_error_reporting(dev, &enable);
+
+	if (!dev->subordinate)
+		return;
+	pci_walk_bus(dev->subordinate, set_device_error_reporting, &enable);
+}
+
 static int find_device_iter(struct device *device, void *data)
 {
 	struct pci_dev *dev;
@@ -525,15 +556,11 @@
 	pci_read_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, &reg32);
 	pci_write_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, reg32);
 
-	/* Enable Root Port device reporting error itself */
-	pci_read_config_word(pdev, pos+PCI_EXP_DEVCTL, &reg16);
-	reg16 = reg16 |
-		PCI_EXP_DEVCTL_CERE |
-		PCI_EXP_DEVCTL_NFERE |
-		PCI_EXP_DEVCTL_FERE |
-		PCI_EXP_DEVCTL_URRE;
-	pci_write_config_word(pdev, pos+PCI_EXP_DEVCTL,
-		reg16);
+	/*
+	 * Enable error reporting for the root port device and downstream port
+	 * devices.
+	 */
+	set_downstream_devices_error_reporting(pdev, true);
 
 	/* Enable Root Port's interrupt in response to error messages */
 	pci_write_config_dword(pdev,
@@ -553,6 +580,12 @@
 	u32 reg32;
 	int pos;
 
+	/*
+	 * Disable error reporting for the root port device and downstream port
+	 * devices.
+	 */
+	set_downstream_devices_error_reporting(pdev, false);
+
 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
 	/* Disable Root's interrupt in response to error messages */
 	pci_write_config_dword(pdev, pos + PCI_ERR_ROOT_COMMAND, 0);
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index f9b874e..5ea566e 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -97,14 +97,13 @@
 
 	pcie_portdrv_save_config(dev);
 
-	pci_enable_pcie_error_reporting(dev);
-
 	return 0;
 }
 
 static void pcie_portdrv_remove (struct pci_dev *dev)
 {
 	pcie_port_device_remove(dev);
+	pci_disable_device(dev);
 	kfree(pci_get_drvdata(dev));
 }
 
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index baad093..92b9efe 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -23,6 +23,7 @@
 #include <linux/acpi.h>
 #include <linux/kallsyms.h>
 #include <linux/dmi.h>
+#include <linux/pci-aspm.h>
 #include "pci.h"
 
 int isa_dma_bridge_buggy;
@@ -1584,6 +1585,7 @@
  */
 #define AMD_813X_MISC			0x40
 #define AMD_813X_NOIOAMODE		(1<<0)
+#define AMD_813X_REV_B2			0x13
 
 static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev)
 {
@@ -1591,6 +1593,8 @@
 
 	if (noioapicquirk)
 		return;
+	if (dev->revision == AMD_813X_REV_B2)
+		return;
 
 	pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword);
 	pci_config_dword &= ~AMD_813X_NOIOAMODE;
@@ -1746,6 +1750,30 @@
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_e100_interrupt);
 
+/*
+ * The 82575 and 82598 may experience data corruption issues when transitioning
+ * out of L0S.  To prevent this we need to disable L0S on the pci-e link
+ */
+static void __devinit quirk_disable_aspm_l0s(struct pci_dev *dev)
+{
+	dev_info(&dev->dev, "Disabling L0s\n");
+	pci_disable_link_state(dev, PCIE_LINK_STATE_L0S);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s);
+
 static void __devinit fixup_rev1_53c810(struct pci_dev* dev)
 {
 	/* rev 1 ncr53c810 chips don't set the class at all which means
@@ -1981,7 +2009,6 @@
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE,
 			quirk_msi_ht_cap);
 
-
 /* The nVidia CK804 chipset may have 2 HT MSI mappings.
  * MSI are supported if the MSI capability set in any of these mappings.
  */
@@ -2032,6 +2059,9 @@
 			 PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB,
 			 ht_enable_msi_mapping);
 
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE,
+			 ht_enable_msi_mapping);
+
 /* The P5N32-SLI Premium motherboard from Asus has a problem with msi
  * for the MCP55 NIC. It is not yet determined whether the msi problem
  * also affects other devices. As for now, turn off msi for this device.
@@ -2048,10 +2078,104 @@
 			PCI_DEVICE_ID_NVIDIA_NVENET_15,
 			nvenet_msi_disable);
 
+static void __devinit nv_ht_enable_msi_mapping(struct pci_dev *dev)
+{
+	struct pci_dev *host_bridge;
+	int pos;
+	int i, dev_no;
+	int found = 0;
+
+	dev_no = dev->devfn >> 3;
+	for (i = dev_no; i >= 0; i--) {
+		host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0));
+		if (!host_bridge)
+			continue;
+
+		pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE);
+		if (pos != 0) {
+			found = 1;
+			break;
+		}
+		pci_dev_put(host_bridge);
+	}
+
+	if (!found)
+		return;
+
+	/* root did that ! */
+	if (msi_ht_cap_enabled(host_bridge))
+		goto out;
+
+	ht_enable_msi_mapping(dev);
+
+out:
+	pci_dev_put(host_bridge);
+}
+
+static void __devinit ht_disable_msi_mapping(struct pci_dev *dev)
+{
+	int pos, ttl = 48;
+
+	pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
+	while (pos && ttl--) {
+		u8 flags;
+
+		if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
+					 &flags) == 0) {
+			dev_info(&dev->dev, "Disabling HT MSI Mapping\n");
+
+			pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
+					      flags & ~HT_MSI_FLAGS_ENABLE);
+		}
+		pos = pci_find_next_ht_capability(dev, pos,
+						  HT_CAPTYPE_MSI_MAPPING);
+	}
+}
+
+static int __devinit ht_check_msi_mapping(struct pci_dev *dev)
+{
+	int pos, ttl = 48;
+	int found = 0;
+
+	/* check if there is HT MSI cap or enabled on this device */
+	pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
+	while (pos && ttl--) {
+		u8 flags;
+
+		if (found < 1)
+			found = 1;
+		if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
+					 &flags) == 0) {
+			if (flags & HT_MSI_FLAGS_ENABLE) {
+				if (found < 2) {
+					found = 2;
+					break;
+				}
+			}
+		}
+		pos = pci_find_next_ht_capability(dev, pos,
+						  HT_CAPTYPE_MSI_MAPPING);
+	}
+
+	return found;
+}
+
 static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev)
 {
 	struct pci_dev *host_bridge;
-	int pos, ttl = 48;
+	int pos;
+	int found;
+
+	/* Enabling HT MSI mapping on this device breaks MCP51 */
+	if (dev->device == 0x270)
+		return;
+
+	/* check if there is HT MSI cap or enabled on this device */
+	found = ht_check_msi_mapping(dev);
+
+	/* no HT MSI CAP */
+	if (found == 0)
+		return;
 
 	/*
 	 * HT MSI mapping should be disabled on devices that are below
@@ -2067,24 +2191,19 @@
 	pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE);
 	if (pos != 0) {
 		/* Host bridge is to HT */
-		ht_enable_msi_mapping(dev);
+		if (found == 1) {
+			/* it is not enabled, try to enable it */
+			nv_ht_enable_msi_mapping(dev);
+		}
 		return;
 	}
 
-	/* Host bridge is not to HT, disable HT MSI mapping on this device */
-	pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
-	while (pos && ttl--) {
-		u8 flags;
+	/* HT MSI is not enabled */
+	if (found == 1)
+		return;
 
-		if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
-					 &flags) == 0) {
-			dev_info(&dev->dev, "Disabling HT MSI mapping");
-			pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
-					      flags & ~HT_MSI_FLAGS_ENABLE);
-		}
-		pos = pci_find_next_ht_capability(dev, pos,
-						  HT_CAPTYPE_MSI_MAPPING);
-	}
+	/* Host bridge is not to HT, disable HT MSI mapping on this device */
+	ht_disable_msi_mapping(dev);
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk);
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 94c9f911..6bcca61 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -1297,7 +1297,7 @@
 
 	set_quirks();
 
-	if (!acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) {
+	if (acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) {
 		interface->capability &= ~ACER_CAP_BRIGHTNESS;
 		printk(ACER_INFO "Brightness must be controlled by "
 		       "generic video driver\n");
diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c
index 1d76892..a52d4a1 100644
--- a/drivers/power/ds2760_battery.c
+++ b/drivers/power/ds2760_battery.c
@@ -180,10 +180,13 @@
 	di->empty_uAh = battery_interpolate(scale, di->temp_C / 10);
 	di->empty_uAh *= 1000; /* convert to µAh */
 
-	/* From Maxim Application Note 131: remaining capacity =
-	 * ((ICA - Empty Value) / (Full Value - Empty Value)) x 100% */
-	di->rem_capacity = ((di->accum_current_uAh - di->empty_uAh) * 100L) /
-			    (di->full_active_uAh - di->empty_uAh);
+	if (di->full_active_uAh == di->empty_uAh)
+		di->rem_capacity = 0;
+	else
+		/* From Maxim Application Note 131: remaining capacity =
+		 * ((ICA - Empty Value) / (Full Value - Empty Value)) x 100% */
+		di->rem_capacity = ((di->accum_current_uAh - di->empty_uAh) * 100L) /
+				    (di->full_active_uAh - di->empty_uAh);
 
 	if (di->rem_capacity < 0)
 		di->rem_capacity = 0;
diff --git a/drivers/sbus/char/bbc_i2c.c b/drivers/sbus/char/bbc_i2c.c
index f08e169..7e30e5f 100644
--- a/drivers/sbus/char/bbc_i2c.c
+++ b/drivers/sbus/char/bbc_i2c.c
@@ -129,7 +129,7 @@
 	bp->waiting = 1;
 	add_wait_queue(&bp->wq, &wait);
 	while (limit-- > 0) {
-		unsigned long val;
+		long val;
 
 		val = wait_event_interruptible_timeout(
 				bp->wq,
diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c
index a9a9893..e6d1fc8 100644
--- a/drivers/sbus/char/jsflash.c
+++ b/drivers/sbus/char/jsflash.c
@@ -38,9 +38,6 @@
 #include <linux/string.h>
 #include <linux/genhd.h>
 #include <linux/blkdev.h>
-
-#define MAJOR_NR	JSFD_MAJOR
-
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/io.h>
diff --git a/drivers/scsi/cxgb3i/cxgb3i.h b/drivers/scsi/cxgb3i/cxgb3i.h
index fde6e4c..a7cf550 100644
--- a/drivers/scsi/cxgb3i/cxgb3i.h
+++ b/drivers/scsi/cxgb3i/cxgb3i.h
@@ -20,6 +20,7 @@
 #include <linux/list.h>
 #include <linux/netdevice.h>
 #include <linux/scatterlist.h>
+#include <linux/skbuff.h>
 #include <scsi/libiscsi_tcp.h>
 
 /* from cxgb3 LLD */
@@ -113,6 +114,26 @@
 	struct cxgb3i_conn *cconn;
 };
 
+/**
+ * struct cxgb3i_task_data - private iscsi task data
+ *
+ * @nr_frags:	# of coalesced page frags (from scsi sgl)
+ * @frags:	coalesced page frags (from scsi sgl)
+ * @skb:	tx pdu skb
+ * @offset:	data offset for the next pdu
+ * @count:	max. possible pdu payload
+ * @sgoffset:	offset to the first sg entry for a given offset
+ */
+#define MAX_PDU_FRAGS	((ULP2_MAX_PDU_PAYLOAD + 512 - 1) / 512)
+struct cxgb3i_task_data {
+	unsigned short nr_frags;
+	skb_frag_t frags[MAX_PDU_FRAGS];
+	struct sk_buff *skb;
+	unsigned int offset;
+	unsigned int count;
+	unsigned int sgoffset;
+};
+
 int cxgb3i_iscsi_init(void);
 void cxgb3i_iscsi_cleanup(void);
 
diff --git a/drivers/scsi/cxgb3i/cxgb3i_ddp.c b/drivers/scsi/cxgb3i/cxgb3i_ddp.c
index 08f3a09..a83d36e 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_ddp.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_ddp.c
@@ -639,10 +639,11 @@
 	write_unlock(&cxgb3i_ddp_rwlock);
 
 	ddp_log_info("nppods %u (0x%x ~ 0x%x), bits %u, mask 0x%x,0x%x "
-			"pkt %u,%u.\n",
+			"pkt %u/%u, %u/%u.\n",
 			ppmax, ddp->llimit, ddp->ulimit, ddp->idx_bits,
 			ddp->idx_mask, ddp->rsvd_tag_mask,
-			ddp->max_txsz, ddp->max_rxsz);
+			ddp->max_txsz, uinfo.max_txsz,
+			ddp->max_rxsz, uinfo.max_rxsz);
 	return 0;
 
 free_ddp_map:
@@ -654,8 +655,8 @@
  * cxgb3i_adapter_ddp_init - initialize the adapter's ddp resource
  * @tdev: t3cdev adapter
  * @tformat: tag format
- * @txsz: max tx pkt size, filled in by this func.
- * @rxsz: max rx pkt size, filled in by this func.
+ * @txsz: max tx pdu payload size, filled in by this func.
+ * @rxsz: max rx pdu payload size, filled in by this func.
  * initialize the ddp pagepod manager for a given adapter if needed and
  * setup the tag format for a given iscsi entity
  */
@@ -685,10 +686,12 @@
 		      tformat->sw_bits, tformat->rsvd_bits,
 		      tformat->rsvd_shift, tformat->rsvd_mask);
 
-	*txsz = ddp->max_txsz;
-	*rxsz = ddp->max_rxsz;
-	ddp_log_info("ddp max pkt size: %u, %u.\n",
-		     ddp->max_txsz, ddp->max_rxsz);
+	*txsz = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
+			ddp->max_txsz - ISCSI_PDU_NONPAYLOAD_LEN);
+	*rxsz = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
+			ddp->max_rxsz - ISCSI_PDU_NONPAYLOAD_LEN);
+	ddp_log_info("max payload size: %u/%u, %u/%u.\n",
+		     *txsz, ddp->max_txsz, *rxsz, ddp->max_rxsz);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(cxgb3i_adapter_ddp_init);
diff --git a/drivers/scsi/cxgb3i/cxgb3i_ddp.h b/drivers/scsi/cxgb3i/cxgb3i_ddp.h
index 5c7c4d9..3faae78 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_ddp.h
+++ b/drivers/scsi/cxgb3i/cxgb3i_ddp.h
@@ -13,6 +13,8 @@
 #ifndef __CXGB3I_ULP2_DDP_H__
 #define __CXGB3I_ULP2_DDP_H__
 
+#include <linux/vmalloc.h>
+
 /**
  * struct cxgb3i_tag_format - cxgb3i ulp tag format for an iscsi entity
  *
@@ -85,8 +87,9 @@
 	struct sk_buff **gl_skb;
 };
 
+#define ISCSI_PDU_NONPAYLOAD_LEN	312 /* bhs(48) + ahs(256) + digest(8) */
 #define ULP2_MAX_PKT_SIZE	16224
-#define ULP2_MAX_PDU_PAYLOAD	(ULP2_MAX_PKT_SIZE - ISCSI_PDU_NONPAYLOAD_MAX)
+#define ULP2_MAX_PDU_PAYLOAD	(ULP2_MAX_PKT_SIZE - ISCSI_PDU_NONPAYLOAD_LEN)
 #define PPOD_PAGES_MAX		4
 #define PPOD_PAGES_SHIFT	2	/* 4 pages per pod */
 
diff --git a/drivers/scsi/cxgb3i/cxgb3i_init.c b/drivers/scsi/cxgb3i/cxgb3i_init.c
index 091ecb4..1ce9f24 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_init.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_init.c
@@ -12,8 +12,8 @@
 #include "cxgb3i.h"
 
 #define DRV_MODULE_NAME         "cxgb3i"
-#define DRV_MODULE_VERSION	"1.0.0"
-#define DRV_MODULE_RELDATE	"Jun. 1, 2008"
+#define DRV_MODULE_VERSION	"1.0.1"
+#define DRV_MODULE_RELDATE	"Jan. 2009"
 
 static char version[] =
 	"Chelsio S3xx iSCSI Driver " DRV_MODULE_NAME
diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
index d83464b..fa2a44f 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
@@ -364,7 +364,8 @@
 
 	cls_session = iscsi_session_setup(&cxgb3i_iscsi_transport, shost,
 					  cmds_max,
-					  sizeof(struct iscsi_tcp_task),
+					  sizeof(struct iscsi_tcp_task) +
+					  sizeof(struct cxgb3i_task_data),
 					  initial_cmdsn, ISCSI_MAX_TARGET);
 	if (!cls_session)
 		return NULL;
@@ -402,17 +403,15 @@
 {
 	struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
 	struct cxgb3i_conn *cconn = tcp_conn->dd_data;
-	unsigned int max = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
-				 cconn->hba->snic->tx_max_size -
-				 ISCSI_PDU_NONPAYLOAD_MAX);
+	unsigned int max = max(512 * MAX_SKB_FRAGS, SKB_TX_HEADROOM);
 
+	max = min(cconn->hba->snic->tx_max_size, max);
 	if (conn->max_xmit_dlength)
-		conn->max_xmit_dlength = min_t(unsigned int,
-						conn->max_xmit_dlength, max);
+		conn->max_xmit_dlength = min(conn->max_xmit_dlength, max);
 	else
 		conn->max_xmit_dlength = max;
 	align_pdu_size(conn->max_xmit_dlength);
-	cxgb3i_log_info("conn 0x%p, max xmit %u.\n",
+	cxgb3i_api_debug("conn 0x%p, max xmit %u.\n",
 			 conn, conn->max_xmit_dlength);
 	return 0;
 }
@@ -427,9 +426,7 @@
 {
 	struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
 	struct cxgb3i_conn *cconn = tcp_conn->dd_data;
-	unsigned int max = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
-				 cconn->hba->snic->rx_max_size -
-				 ISCSI_PDU_NONPAYLOAD_MAX);
+	unsigned int max = cconn->hba->snic->rx_max_size;
 
 	align_pdu_size(max);
 	if (conn->max_recv_dlength) {
@@ -439,8 +436,7 @@
 					 conn->max_recv_dlength, max);
 			return -EINVAL;
 		}
-		conn->max_recv_dlength = min_t(unsigned int,
-						conn->max_recv_dlength, max);
+		conn->max_recv_dlength = min(conn->max_recv_dlength, max);
 		align_pdu_size(conn->max_recv_dlength);
 	} else
 		conn->max_recv_dlength = max;
@@ -844,7 +840,7 @@
 	.proc_name		= "cxgb3i",
 	.queuecommand		= iscsi_queuecommand,
 	.change_queue_depth	= iscsi_change_queue_depth,
-	.can_queue		= 128 * (ISCSI_DEF_XMIT_CMDS_MAX - 1),
+	.can_queue		= CXGB3I_SCSI_QDEPTH_DFLT - 1,
 	.sg_tablesize		= SG_ALL,
 	.max_sectors		= 0xFFFF,
 	.cmd_per_lun		= ISCSI_DEF_CMD_PER_LUN,
diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c
index a865f1f..de3b3b6 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_offload.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c
@@ -23,19 +23,19 @@
 #include "cxgb3i_ddp.h"
 
 #ifdef __DEBUG_C3CN_CONN__
-#define c3cn_conn_debug         cxgb3i_log_info
+#define c3cn_conn_debug		cxgb3i_log_debug
 #else
 #define c3cn_conn_debug(fmt...)
 #endif
 
 #ifdef __DEBUG_C3CN_TX__
-#define c3cn_tx_debug         cxgb3i_log_debug
+#define c3cn_tx_debug		cxgb3i_log_debug
 #else
 #define c3cn_tx_debug(fmt...)
 #endif
 
 #ifdef __DEBUG_C3CN_RX__
-#define c3cn_rx_debug         cxgb3i_log_debug
+#define c3cn_rx_debug		cxgb3i_log_debug
 #else
 #define c3cn_rx_debug(fmt...)
 #endif
@@ -47,9 +47,9 @@
 module_param(cxgb3_rcv_win, int, 0644);
 MODULE_PARM_DESC(cxgb3_rcv_win, "TCP receive window in bytes (default=256KB)");
 
-static int cxgb3_snd_win = 64 * 1024;
+static int cxgb3_snd_win = 128 * 1024;
 module_param(cxgb3_snd_win, int, 0644);
-MODULE_PARM_DESC(cxgb3_snd_win, "TCP send window in bytes (default=64KB)");
+MODULE_PARM_DESC(cxgb3_snd_win, "TCP send window in bytes (default=128KB)");
 
 static int cxgb3_rx_credit_thres = 10 * 1024;
 module_param(cxgb3_rx_credit_thres, int, 0644);
@@ -301,8 +301,8 @@
 static void skb_entail(struct s3_conn *c3cn, struct sk_buff *skb,
 		       int flags)
 {
-	CXGB3_SKB_CB(skb)->seq = c3cn->write_seq;
-	CXGB3_SKB_CB(skb)->flags = flags;
+	skb_tcp_seq(skb) = c3cn->write_seq;
+	skb_flags(skb) = flags;
 	__skb_queue_tail(&c3cn->write_queue, skb);
 }
 
@@ -457,12 +457,9 @@
  * The number of WRs needed for an skb depends on the number of fragments
  * in the skb and whether it has any payload in its main body.  This maps the
  * length of the gather list represented by an skb into the # of necessary WRs.
- *
- * The max. length of an skb is controlled by the max pdu size which is ~16K.
- * Also, assume the min. fragment length is the sector size (512), then add
- * extra fragment counts for iscsi bhs and payload padding.
+ * The extra two fragments are for iscsi bhs and payload padding.
  */
-#define SKB_WR_LIST_SIZE	(16384/512 + 3)
+#define SKB_WR_LIST_SIZE	(MAX_SKB_FRAGS + 2)
 static unsigned int skb_wrs[SKB_WR_LIST_SIZE] __read_mostly;
 
 static void s3_init_wr_tab(unsigned int wr_len)
@@ -485,7 +482,7 @@
 
 static inline void reset_wr_list(struct s3_conn *c3cn)
 {
-	c3cn->wr_pending_head = NULL;
+	c3cn->wr_pending_head = c3cn->wr_pending_tail = NULL;
 }
 
 /*
@@ -496,7 +493,7 @@
 static inline void enqueue_wr(struct s3_conn *c3cn,
 			      struct sk_buff *skb)
 {
-	skb_wr_data(skb) = NULL;
+	skb_tx_wr_next(skb) = NULL;
 
 	/*
 	 * We want to take an extra reference since both us and the driver
@@ -509,10 +506,22 @@
 	if (!c3cn->wr_pending_head)
 		c3cn->wr_pending_head = skb;
 	else
-		skb_wr_data(skb) = skb;
+		skb_tx_wr_next(c3cn->wr_pending_tail) = skb;
 	c3cn->wr_pending_tail = skb;
 }
 
+static int count_pending_wrs(struct s3_conn *c3cn)
+{
+	int n = 0;
+	const struct sk_buff *skb = c3cn->wr_pending_head;
+
+	while (skb) {
+		n += skb->csum;
+		skb = skb_tx_wr_next(skb);
+	}
+	return n;
+}
+
 static inline struct sk_buff *peek_wr(const struct s3_conn *c3cn)
 {
 	return c3cn->wr_pending_head;
@@ -529,8 +538,8 @@
 
 	if (likely(skb)) {
 		/* Don't bother clearing the tail */
-		c3cn->wr_pending_head = skb_wr_data(skb);
-		skb_wr_data(skb) = NULL;
+		c3cn->wr_pending_head = skb_tx_wr_next(skb);
+		skb_tx_wr_next(skb) = NULL;
 	}
 	return skb;
 }
@@ -543,13 +552,14 @@
 }
 
 static inline void make_tx_data_wr(struct s3_conn *c3cn, struct sk_buff *skb,
-				   int len)
+				   int len, int req_completion)
 {
 	struct tx_data_wr *req;
 
 	skb_reset_transport_header(skb);
 	req = (struct tx_data_wr *)__skb_push(skb, sizeof(*req));
-	req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_TX_DATA));
+	req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_TX_DATA) |
+			(req_completion ? F_WR_COMPL : 0));
 	req->wr_lo = htonl(V_WR_TID(c3cn->tid));
 	req->sndseq = htonl(c3cn->snd_nxt);
 	/* len includes the length of any HW ULP additions */
@@ -592,7 +602,7 @@
 
 	if (unlikely(c3cn->state == C3CN_STATE_CONNECTING ||
 		     c3cn->state == C3CN_STATE_CLOSE_WAIT_1 ||
-		     c3cn->state == C3CN_STATE_ABORTING)) {
+		     c3cn->state >= C3CN_STATE_ABORTING)) {
 		c3cn_tx_debug("c3cn 0x%p, in closing state %u.\n",
 			      c3cn, c3cn->state);
 		return 0;
@@ -615,7 +625,7 @@
 		if (c3cn->wr_avail < wrs_needed) {
 			c3cn_tx_debug("c3cn 0x%p, skb len %u/%u, frag %u, "
 				      "wr %d < %u.\n",
-				      c3cn, skb->len, skb->datalen, frags,
+				      c3cn, skb->len, skb->data_len, frags,
 				      wrs_needed, c3cn->wr_avail);
 			break;
 		}
@@ -627,20 +637,24 @@
 		c3cn->wr_unacked += wrs_needed;
 		enqueue_wr(c3cn, skb);
 
-		if (likely(CXGB3_SKB_CB(skb)->flags & C3CB_FLAG_NEED_HDR)) {
-			len += ulp_extra_len(skb);
-			make_tx_data_wr(c3cn, skb, len);
-			c3cn->snd_nxt += len;
-			if ((req_completion
-			     && c3cn->wr_unacked == wrs_needed)
-			    || (CXGB3_SKB_CB(skb)->flags & C3CB_FLAG_COMPL)
-			    || c3cn->wr_unacked >= c3cn->wr_max / 2) {
-				struct work_request_hdr *wr = cplhdr(skb);
+		c3cn_tx_debug("c3cn 0x%p, enqueue, skb len %u/%u, frag %u, "
+				"wr %d, left %u, unack %u.\n",
+				c3cn, skb->len, skb->data_len, frags,
+				wrs_needed, c3cn->wr_avail, c3cn->wr_unacked);
 
-				wr->wr_hi |= htonl(F_WR_COMPL);
+
+		if (likely(skb_flags(skb) & C3CB_FLAG_NEED_HDR)) {
+			if ((req_completion &&
+				c3cn->wr_unacked == wrs_needed) ||
+			    (skb_flags(skb) & C3CB_FLAG_COMPL) ||
+			    c3cn->wr_unacked >= c3cn->wr_max / 2) {
+				req_completion = 1;
 				c3cn->wr_unacked = 0;
 			}
-			CXGB3_SKB_CB(skb)->flags &= ~C3CB_FLAG_NEED_HDR;
+			len += ulp_extra_len(skb);
+			make_tx_data_wr(c3cn, skb, len, req_completion);
+			c3cn->snd_nxt += len;
+			skb_flags(skb) &= ~C3CB_FLAG_NEED_HDR;
 		}
 
 		total_size += skb->truesize;
@@ -735,8 +749,11 @@
 	if (unlikely(c3cn_flag(c3cn, C3CN_ACTIVE_CLOSE_NEEDED)))
 		/* upper layer has requested closing */
 		send_abort_req(c3cn);
-	else if (c3cn_push_tx_frames(c3cn, 1))
+	else {
+		if (skb_queue_len(&c3cn->write_queue))
+			c3cn_push_tx_frames(c3cn, 1);
 		cxgb3i_conn_tx_open(c3cn);
+	}
 }
 
 static int do_act_establish(struct t3cdev *cdev, struct sk_buff *skb,
@@ -1082,8 +1099,8 @@
 		return;
 	}
 
-	CXGB3_SKB_CB(skb)->seq = ntohl(hdr_cpl->seq);
-	CXGB3_SKB_CB(skb)->flags = 0;
+	skb_tcp_seq(skb) = ntohl(hdr_cpl->seq);
+	skb_flags(skb) = 0;
 
 	skb_reset_transport_header(skb);
 	__skb_pull(skb, sizeof(struct cpl_iscsi_hdr));
@@ -1103,12 +1120,12 @@
 		goto abort_conn;
 
 	skb_ulp_mode(skb) = ULP2_FLAG_DATA_READY;
-	skb_ulp_pdulen(skb) = ntohs(ddp_cpl.len);
-	skb_ulp_ddigest(skb) = ntohl(ddp_cpl.ulp_crc);
+	skb_rx_pdulen(skb) = ntohs(ddp_cpl.len);
+	skb_rx_ddigest(skb) = ntohl(ddp_cpl.ulp_crc);
 	status = ntohl(ddp_cpl.ddp_status);
 
 	c3cn_rx_debug("rx skb 0x%p, len %u, pdulen %u, ddp status 0x%x.\n",
-		      skb, skb->len, skb_ulp_pdulen(skb), status);
+		      skb, skb->len, skb_rx_pdulen(skb), status);
 
 	if (status & (1 << RX_DDP_STATUS_HCRC_SHIFT))
 		skb_ulp_mode(skb) |= ULP2_FLAG_HCRC_ERROR;
@@ -1126,7 +1143,7 @@
 	} else if (status & (1 << RX_DDP_STATUS_DDP_SHIFT))
 		skb_ulp_mode(skb) |= ULP2_FLAG_DATA_DDPED;
 
-	c3cn->rcv_nxt = ntohl(ddp_cpl.seq) + skb_ulp_pdulen(skb);
+	c3cn->rcv_nxt = ntohl(ddp_cpl.seq) + skb_rx_pdulen(skb);
 	__pskb_trim(skb, len);
 	__skb_queue_tail(&c3cn->receive_queue, skb);
 	cxgb3i_conn_pdu_ready(c3cn);
@@ -1151,12 +1168,27 @@
  * Process an acknowledgment of WR completion.  Advance snd_una and send the
  * next batch of work requests from the write queue.
  */
+static void check_wr_invariants(struct s3_conn *c3cn)
+{
+	int pending = count_pending_wrs(c3cn);
+
+	if (unlikely(c3cn->wr_avail + pending != c3cn->wr_max))
+		cxgb3i_log_error("TID %u: credit imbalance: avail %u, "
+				"pending %u, total should be %u\n",
+				c3cn->tid, c3cn->wr_avail, pending,
+				c3cn->wr_max);
+}
+
 static void process_wr_ack(struct s3_conn *c3cn, struct sk_buff *skb)
 {
 	struct cpl_wr_ack *hdr = cplhdr(skb);
 	unsigned int credits = ntohs(hdr->credits);
 	u32 snd_una = ntohl(hdr->snd_una);
 
+	c3cn_tx_debug("%u WR credits, avail %u, unack %u, TID %u, state %u.\n",
+			credits, c3cn->wr_avail, c3cn->wr_unacked,
+			c3cn->tid, c3cn->state);
+
 	c3cn->wr_avail += credits;
 	if (c3cn->wr_unacked > c3cn->wr_max - c3cn->wr_avail)
 		c3cn->wr_unacked = c3cn->wr_max - c3cn->wr_avail;
@@ -1171,6 +1203,17 @@
 			break;
 		}
 		if (unlikely(credits < p->csum)) {
+			struct tx_data_wr *w = cplhdr(p);
+			cxgb3i_log_error("TID %u got %u WR credits need %u, "
+					 "len %u, main body %u, frags %u, "
+					 "seq # %u, ACK una %u, ACK nxt %u, "
+					 "WR_AVAIL %u, WRs pending %u\n",
+					 c3cn->tid, credits, p->csum, p->len,
+					 p->len - p->data_len,
+					 skb_shinfo(p)->nr_frags,
+					 ntohl(w->sndseq), snd_una,
+					 ntohl(hdr->snd_nxt), c3cn->wr_avail,
+					 count_pending_wrs(c3cn) - credits);
 			p->csum -= credits;
 			break;
 		} else {
@@ -1180,15 +1223,24 @@
 		}
 	}
 
-	if (unlikely(before(snd_una, c3cn->snd_una)))
+	check_wr_invariants(c3cn);
+
+	if (unlikely(before(snd_una, c3cn->snd_una))) {
+		cxgb3i_log_error("TID %u, unexpected sequence # %u in WR_ACK "
+				 "snd_una %u\n",
+				 c3cn->tid, snd_una, c3cn->snd_una);
 		goto out_free;
+	}
 
 	if (c3cn->snd_una != snd_una) {
 		c3cn->snd_una = snd_una;
 		dst_confirm(c3cn->dst_cache);
 	}
 
-	if (skb_queue_len(&c3cn->write_queue) && c3cn_push_tx_frames(c3cn, 0))
+	if (skb_queue_len(&c3cn->write_queue)) {
+		if (c3cn_push_tx_frames(c3cn, 0))
+			cxgb3i_conn_tx_open(c3cn);
+	} else
 		cxgb3i_conn_tx_open(c3cn);
 out_free:
 	__kfree_skb(skb);
@@ -1452,7 +1504,7 @@
 			      struct dst_entry *dst)
 {
 	BUG_ON(c3cn->cdev != cdev);
-	c3cn->wr_max = c3cn->wr_avail = T3C_DATA(cdev)->max_wrs;
+	c3cn->wr_max = c3cn->wr_avail = T3C_DATA(cdev)->max_wrs - 1;
 	c3cn->wr_unacked = 0;
 	c3cn->mss_idx = select_mss(c3cn, dst_mtu(dst));
 
@@ -1671,9 +1723,17 @@
 		goto out_err;
 	}
 
-	err = -EPIPE;
 	if (c3cn->err) {
 		c3cn_tx_debug("c3cn 0x%p, err %d.\n", c3cn, c3cn->err);
+		err = -EPIPE;
+		goto out_err;
+	}
+
+	if (c3cn->write_seq - c3cn->snd_una >= cxgb3_snd_win) {
+		c3cn_tx_debug("c3cn 0x%p, snd %u - %u > %u.\n",
+				c3cn, c3cn->write_seq, c3cn->snd_una,
+				cxgb3_snd_win);
+		err = -EAGAIN;
 		goto out_err;
 	}
 
diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.h b/drivers/scsi/cxgb3i/cxgb3i_offload.h
index d231569..6344b9e 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_offload.h
+++ b/drivers/scsi/cxgb3i/cxgb3i_offload.h
@@ -178,25 +178,33 @@
  * @flag:	see C3CB_FLAG_* below
  * @ulp_mode:	ULP mode/submode of sk_buff
  * @seq:	tcp sequence number
- * @ddigest:	pdu data digest
- * @pdulen:	recovered pdu length
- * @wr_data:	scratch area for tx wr
  */
+struct cxgb3_skb_rx_cb {
+	__u32 ddigest;			/* data digest */
+	__u32 pdulen;			/* recovered pdu length */
+};
+
+struct cxgb3_skb_tx_cb {
+	struct sk_buff *wr_next;	/* next wr */
+};
+
 struct cxgb3_skb_cb {
 	__u8 flags;
 	__u8 ulp_mode;
 	__u32 seq;
-	__u32 ddigest;
-	__u32 pdulen;
-	struct sk_buff *wr_data;
+	union {
+		struct cxgb3_skb_rx_cb rx;
+		struct cxgb3_skb_tx_cb tx;
+	};
 };
 
 #define CXGB3_SKB_CB(skb)	((struct cxgb3_skb_cb *)&((skb)->cb[0]))
-
+#define skb_flags(skb)		(CXGB3_SKB_CB(skb)->flags)
 #define skb_ulp_mode(skb)	(CXGB3_SKB_CB(skb)->ulp_mode)
-#define skb_ulp_ddigest(skb)	(CXGB3_SKB_CB(skb)->ddigest)
-#define skb_ulp_pdulen(skb)	(CXGB3_SKB_CB(skb)->pdulen)
-#define skb_wr_data(skb)	(CXGB3_SKB_CB(skb)->wr_data)
+#define skb_tcp_seq(skb)	(CXGB3_SKB_CB(skb)->seq)
+#define skb_rx_ddigest(skb)	(CXGB3_SKB_CB(skb)->rx.ddigest)
+#define skb_rx_pdulen(skb)	(CXGB3_SKB_CB(skb)->rx.pdulen)
+#define skb_tx_wr_next(skb)	(CXGB3_SKB_CB(skb)->tx.wr_next)
 
 enum c3cb_flags {
 	C3CB_FLAG_NEED_HDR = 1 << 0,	/* packet needs a TX_DATA_WR header */
@@ -217,6 +225,7 @@
 /* for TX: a skb must have a headroom of at least TX_HEADER_LEN bytes */
 #define TX_HEADER_LEN \
 		(sizeof(struct tx_data_wr) + sizeof(struct sge_opaque_hdr))
+#define SKB_TX_HEADROOM		SKB_MAX_HEAD(TX_HEADER_LEN)
 
 /*
  * get and set private ip for iscsi traffic
diff --git a/drivers/scsi/cxgb3i/cxgb3i_pdu.c b/drivers/scsi/cxgb3i/cxgb3i_pdu.c
index ce7ce8c..17115c2 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_pdu.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_pdu.c
@@ -32,6 +32,10 @@
 #define cxgb3i_tx_debug(fmt...)
 #endif
 
+/* always allocate rooms for AHS */
+#define SKB_TX_PDU_HEADER_LEN	\
+	(sizeof(struct iscsi_hdr) + ISCSI_MAX_AHS_SIZE)
+static unsigned int skb_extra_headroom;
 static struct page *pad_page;
 
 /*
@@ -146,12 +150,13 @@
 
 void cxgb3i_conn_cleanup_task(struct iscsi_task *task)
 {
-	struct iscsi_tcp_task *tcp_task = task->dd_data;
+	struct cxgb3i_task_data *tdata = task->dd_data +
+					sizeof(struct iscsi_tcp_task);
 
 	/* never reached the xmit task callout */
-	if (tcp_task->dd_data)
-		kfree_skb(tcp_task->dd_data);
-	tcp_task->dd_data = NULL;
+	if (tdata->skb)
+		__kfree_skb(tdata->skb);
+	memset(tdata, 0, sizeof(struct cxgb3i_task_data));
 
 	/* MNC - Do we need a check in case this is called but
 	 * cxgb3i_conn_alloc_pdu has never been called on the task */
@@ -159,28 +164,102 @@
 	iscsi_tcp_cleanup_task(task);
 }
 
-/*
- * We do not support ahs yet
- */
+static int sgl_seek_offset(struct scatterlist *sgl, unsigned int sgcnt,
+				unsigned int offset, unsigned int *off,
+				struct scatterlist **sgp)
+{
+	int i;
+	struct scatterlist *sg;
+
+	for_each_sg(sgl, sg, sgcnt, i) {
+		if (offset < sg->length) {
+			*off = offset;
+			*sgp = sg;
+			return 0;
+		}
+		offset -= sg->length;
+	}
+	return -EFAULT;
+}
+
+static int sgl_read_to_frags(struct scatterlist *sg, unsigned int sgoffset,
+				unsigned int dlen, skb_frag_t *frags,
+				int frag_max)
+{
+	unsigned int datalen = dlen;
+	unsigned int sglen = sg->length - sgoffset;
+	struct page *page = sg_page(sg);
+	int i;
+
+	i = 0;
+	do {
+		unsigned int copy;
+
+		if (!sglen) {
+			sg = sg_next(sg);
+			if (!sg) {
+				cxgb3i_log_error("%s, sg NULL, len %u/%u.\n",
+						 __func__, datalen, dlen);
+				return -EINVAL;
+			}
+			sgoffset = 0;
+			sglen = sg->length;
+			page = sg_page(sg);
+
+		}
+		copy = min(datalen, sglen);
+		if (i && page == frags[i - 1].page &&
+		    sgoffset + sg->offset ==
+			frags[i - 1].page_offset + frags[i - 1].size) {
+			frags[i - 1].size += copy;
+		} else {
+			if (i >= frag_max) {
+				cxgb3i_log_error("%s, too many pages %u, "
+						 "dlen %u.\n", __func__,
+						 frag_max, dlen);
+				return -EINVAL;
+			}
+
+			frags[i].page = page;
+			frags[i].page_offset = sg->offset + sgoffset;
+			frags[i].size = copy;
+			i++;
+		}
+		datalen -= copy;
+		sgoffset += copy;
+		sglen -= copy;
+	} while (datalen);
+
+	return i;
+}
+
 int cxgb3i_conn_alloc_pdu(struct iscsi_task *task, u8 opcode)
 {
+	struct iscsi_conn *conn = task->conn;
 	struct iscsi_tcp_task *tcp_task = task->dd_data;
-	struct sk_buff *skb;
+	struct cxgb3i_task_data *tdata = task->dd_data + sizeof(*tcp_task);
+	struct scsi_cmnd *sc = task->sc;
+	int headroom = SKB_TX_PDU_HEADER_LEN;
 
+	tcp_task->dd_data = tdata;
 	task->hdr = NULL;
-	/* always allocate rooms for AHS */
-	skb = alloc_skb(sizeof(struct iscsi_hdr) + ISCSI_MAX_AHS_SIZE +
-			TX_HEADER_LEN,  GFP_ATOMIC);
-	if (!skb)
+
+	/* write command, need to send data pdus */
+	if (skb_extra_headroom && (opcode == ISCSI_OP_SCSI_DATA_OUT ||
+	    (opcode == ISCSI_OP_SCSI_CMD &&
+	    (scsi_bidi_cmnd(sc) || sc->sc_data_direction == DMA_TO_DEVICE))))
+		headroom += min(skb_extra_headroom, conn->max_xmit_dlength);
+
+	tdata->skb = alloc_skb(TX_HEADER_LEN + headroom, GFP_ATOMIC);
+	if (!tdata->skb)
 		return -ENOMEM;
+	skb_reserve(tdata->skb, TX_HEADER_LEN);
 
 	cxgb3i_tx_debug("task 0x%p, opcode 0x%x, skb 0x%p.\n",
-			task, opcode, skb);
+			task, opcode, tdata->skb);
 
-	tcp_task->dd_data = skb;
-	skb_reserve(skb, TX_HEADER_LEN);
-	task->hdr = (struct iscsi_hdr *)skb->data;
-	task->hdr_max = sizeof(struct iscsi_hdr);
+	task->hdr = (struct iscsi_hdr *)tdata->skb->data;
+	task->hdr_max = SKB_TX_PDU_HEADER_LEN;
 
 	/* data_out uses scsi_cmd's itt */
 	if (opcode != ISCSI_OP_SCSI_DATA_OUT)
@@ -192,13 +271,13 @@
 int cxgb3i_conn_init_pdu(struct iscsi_task *task, unsigned int offset,
 			      unsigned int count)
 {
-	struct iscsi_tcp_task *tcp_task = task->dd_data;
-	struct sk_buff *skb = tcp_task->dd_data;
 	struct iscsi_conn *conn = task->conn;
-	struct page *pg;
+	struct iscsi_tcp_task *tcp_task = task->dd_data;
+	struct cxgb3i_task_data *tdata = tcp_task->dd_data;
+	struct sk_buff *skb = tdata->skb;
 	unsigned int datalen = count;
 	int i, padlen = iscsi_padding(count);
-	skb_frag_t *frag;
+	struct page *pg;
 
 	cxgb3i_tx_debug("task 0x%p,0x%p, offset %u, count %u, skb 0x%p.\n",
 			task, task->sc, offset, count, skb);
@@ -209,90 +288,94 @@
 		return 0;
 
 	if (task->sc) {
-		struct scatterlist *sg;
-		struct scsi_data_buffer *sdb;
-		unsigned int sgoffset = offset;
-		struct page *sgpg;
-		unsigned int sglen;
+		struct scsi_data_buffer *sdb = scsi_out(task->sc);
+		struct scatterlist *sg = NULL;
+		int err;
 
-		sdb = scsi_out(task->sc);
-		sg = sdb->table.sgl;
-
-		for_each_sg(sdb->table.sgl, sg, sdb->table.nents, i) {
-			cxgb3i_tx_debug("sg %d, page 0x%p, len %u offset %u\n",
-					i, sg_page(sg), sg->length, sg->offset);
-
-			if (sgoffset < sg->length)
-				break;
-			sgoffset -= sg->length;
+		tdata->offset = offset;
+		tdata->count = count;
+		err = sgl_seek_offset(sdb->table.sgl, sdb->table.nents,
+					tdata->offset, &tdata->sgoffset, &sg);
+		if (err < 0) {
+			cxgb3i_log_warn("tpdu, sgl %u, bad offset %u/%u.\n",
+					sdb->table.nents, tdata->offset,
+					sdb->length);
+			return err;
 		}
-		sgpg = sg_page(sg);
-		sglen = sg->length - sgoffset;
+		err = sgl_read_to_frags(sg, tdata->sgoffset, tdata->count,
+					tdata->frags, MAX_PDU_FRAGS);
+		if (err < 0) {
+			cxgb3i_log_warn("tpdu, sgl %u, bad offset %u + %u.\n",
+					sdb->table.nents, tdata->offset,
+					tdata->count);
+			return err;
+		}
+		tdata->nr_frags = err;
 
-		do {
-			int j = skb_shinfo(skb)->nr_frags;
-			unsigned int copy;
+		if (tdata->nr_frags > MAX_SKB_FRAGS ||
+		    (padlen && tdata->nr_frags == MAX_SKB_FRAGS)) {
+			char *dst = skb->data + task->hdr_len;
+			skb_frag_t *frag = tdata->frags;
 
-			if (!sglen) {
-				sg = sg_next(sg);
-				sgpg = sg_page(sg);
-				sgoffset = 0;
-				sglen = sg->length;
-				++i;
+			/* data fits in the skb's headroom */
+			for (i = 0; i < tdata->nr_frags; i++, frag++) {
+				char *src = kmap_atomic(frag->page,
+							KM_SOFTIRQ0);
+
+				memcpy(dst, src+frag->page_offset, frag->size);
+				dst += frag->size;
+				kunmap_atomic(src, KM_SOFTIRQ0);
 			}
-			copy = min(sglen, datalen);
-			if (j && skb_can_coalesce(skb, j, sgpg,
-						  sg->offset + sgoffset)) {
-				skb_shinfo(skb)->frags[j - 1].size += copy;
-			} else {
-				get_page(sgpg);
-				skb_fill_page_desc(skb, j, sgpg,
-						   sg->offset + sgoffset, copy);
+			if (padlen) {
+				memset(dst, 0, padlen);
+				padlen = 0;
 			}
-			sgoffset += copy;
-			sglen -= copy;
-			datalen -= copy;
-		} while (datalen);
+			skb_put(skb, count + padlen);
+		} else {
+			/* data fit into frag_list */
+			for (i = 0; i < tdata->nr_frags; i++)
+				get_page(tdata->frags[i].page);
+
+			memcpy(skb_shinfo(skb)->frags, tdata->frags,
+				sizeof(skb_frag_t) * tdata->nr_frags);
+			skb_shinfo(skb)->nr_frags = tdata->nr_frags;
+			skb->len += count;
+			skb->data_len += count;
+			skb->truesize += count;
+		}
+
 	} else {
 		pg = virt_to_page(task->data);
 
-		while (datalen) {
-			i = skb_shinfo(skb)->nr_frags;
-			frag = &skb_shinfo(skb)->frags[i];
-
-			get_page(pg);
-			frag->page = pg;
-			frag->page_offset = 0;
-			frag->size = min((unsigned int)PAGE_SIZE, datalen);
-
-			skb_shinfo(skb)->nr_frags++;
-			datalen -= frag->size;
-			pg++;
-		}
+		get_page(pg);
+		skb_fill_page_desc(skb, 0, pg, offset_in_page(task->data),
+					count);
+		skb->len += count;
+		skb->data_len += count;
+		skb->truesize += count;
 	}
 
 	if (padlen) {
 		i = skb_shinfo(skb)->nr_frags;
-		frag = &skb_shinfo(skb)->frags[i];
-		frag->page = pad_page;
-		frag->page_offset = 0;
-		frag->size = padlen;
-		skb_shinfo(skb)->nr_frags++;
+		get_page(pad_page);
+		skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags, pad_page, 0,
+				 padlen);
+
+		skb->data_len += padlen;
+		skb->truesize += padlen;
+		skb->len += padlen;
 	}
 
-	datalen = count + padlen;
-	skb->data_len += datalen;
-	skb->truesize += datalen;
-	skb->len += datalen;
 	return 0;
 }
 
 int cxgb3i_conn_xmit_pdu(struct iscsi_task *task)
 {
-	struct iscsi_tcp_task *tcp_task = task->dd_data;
-	struct sk_buff *skb = tcp_task->dd_data;
 	struct iscsi_tcp_conn *tcp_conn = task->conn->dd_data;
 	struct cxgb3i_conn *cconn = tcp_conn->dd_data;
+	struct iscsi_tcp_task *tcp_task = task->dd_data;
+	struct cxgb3i_task_data *tdata = tcp_task->dd_data;
+	struct sk_buff *skb = tdata->skb;
 	unsigned int datalen;
 	int err;
 
@@ -300,13 +383,14 @@
 		return 0;
 
 	datalen = skb->data_len;
-	tcp_task->dd_data = NULL;
+	tdata->skb = NULL;
 	err = cxgb3i_c3cn_send_pdus(cconn->cep->c3cn, skb);
-	cxgb3i_tx_debug("task 0x%p, skb 0x%p, len %u/%u, rv %d.\n",
-			task, skb, skb->len, skb->data_len, err);
 	if (err > 0) {
 		int pdulen = err;
 
+	cxgb3i_tx_debug("task 0x%p, skb 0x%p, len %u/%u, rv %d.\n",
+			task, skb, skb->len, skb->data_len, err);
+
 		if (task->conn->hdrdgst_en)
 			pdulen += ISCSI_DIGEST_SIZE;
 		if (datalen && task->conn->datadgst_en)
@@ -325,12 +409,14 @@
 		return err;
 	}
 	/* reset skb to send when we are called again */
-	tcp_task->dd_data = skb;
+	tdata->skb = skb;
 	return -EAGAIN;
 }
 
 int cxgb3i_pdu_init(void)
 {
+	if (SKB_TX_HEADROOM > (512 * MAX_SKB_FRAGS))
+		skb_extra_headroom = SKB_TX_HEADROOM;
 	pad_page = alloc_page(GFP_KERNEL);
 	if (!pad_page)
 		return -ENOMEM;
@@ -366,7 +452,9 @@
 	skb = skb_peek(&c3cn->receive_queue);
 	while (!err && skb) {
 		__skb_unlink(skb, &c3cn->receive_queue);
-		read += skb_ulp_pdulen(skb);
+		read += skb_rx_pdulen(skb);
+		cxgb3i_rx_debug("conn 0x%p, cn 0x%p, rx skb 0x%p, pdulen %u.\n",
+				conn, c3cn, skb, skb_rx_pdulen(skb));
 		err = cxgb3i_conn_read_pdu_skb(conn, skb);
 		__kfree_skb(skb);
 		skb = skb_peek(&c3cn->receive_queue);
@@ -377,6 +465,11 @@
 		cxgb3i_c3cn_rx_credits(c3cn, read);
 	}
 	conn->rxdata_octets += read;
+
+	if (err) {
+		cxgb3i_log_info("conn 0x%p rx failed err %d.\n", conn, err);
+		iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
+	}
 }
 
 void cxgb3i_conn_tx_open(struct s3_conn *c3cn)
diff --git a/drivers/scsi/cxgb3i/cxgb3i_pdu.h b/drivers/scsi/cxgb3i/cxgb3i_pdu.h
index a3f685c..0770b23 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_pdu.h
+++ b/drivers/scsi/cxgb3i/cxgb3i_pdu.h
@@ -53,7 +53,7 @@
 #define ULP2_FLAG_DCRC_ERROR		0x20
 #define ULP2_FLAG_PAD_ERROR		0x40
 
-void cxgb3i_conn_closing(struct s3_conn *);
+void cxgb3i_conn_closing(struct s3_conn *c3cn);
 void cxgb3i_conn_pdu_ready(struct s3_conn *c3cn);
 void cxgb3i_conn_tx_open(struct s3_conn *c3cn);
 #endif
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index a48e499..34be88d 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -1251,6 +1251,7 @@
 	{ PCI_VDEVICE(TTI, 0x3530), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3560), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x4322), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4321), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x4210), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x4211), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x4310), (kernel_ulong_t)&hptiop_itl_ops },
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 940dc32..b82ffd9 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1040,12 +1040,11 @@
 				action = ACTION_FAIL;
 			break;
 		case ABORTED_COMMAND:
+			action = ACTION_FAIL;
 			if (sshdr.asc == 0x10) { /* DIF */
 				description = "Target Data Integrity Failure";
-				action = ACTION_FAIL;
 				error = -EILSEQ;
-			} else
-				action = ACTION_RETRY;
+			}
 			break;
 		case NOT_READY:
 			/* If the device is in the process of becoming
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index d57566b..55310db 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -107,6 +107,7 @@
 static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
 static void sd_print_result(struct scsi_disk *, int);
 
+static DEFINE_SPINLOCK(sd_index_lock);
 static DEFINE_IDA(sd_index_ida);
 
 /* This semaphore is used to mediate the 0->1 reference get in the
@@ -1914,7 +1915,9 @@
 		if (!ida_pre_get(&sd_index_ida, GFP_KERNEL))
 			goto out_put;
 
+		spin_lock(&sd_index_lock);
 		error = ida_get_new(&sd_index_ida, &index);
+		spin_unlock(&sd_index_lock);
 	} while (error == -EAGAIN);
 
 	if (error)
@@ -1936,7 +1939,9 @@
 	return 0;
 
  out_free_index:
+	spin_lock(&sd_index_lock);
 	ida_remove(&sd_index_ida, index);
+	spin_unlock(&sd_index_lock);
  out_put:
 	put_disk(gd);
  out_free:
@@ -1986,7 +1991,9 @@
 	struct scsi_disk *sdkp = to_scsi_disk(dev);
 	struct gendisk *disk = sdkp->disk;
 	
+	spin_lock(&sd_index_lock);
 	ida_remove(&sd_index_ida, sdkp->index);
+	spin_unlock(&sd_index_lock);
 
 	disk->private_data = NULL;
 	put_disk(disk);
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 3599828..022e89f 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -133,7 +133,7 @@
 # define SCSPTR3	0xffed0024	/* 16 bit SCIF */
 # define SCSPTR4	0xffee0024	/* 16 bit SCIF */
 # define SCSPTR5	0xffef0024	/* 16 bit SCIF */
-# define SCIF_OPER	0x0001		/* Overrun error bit */
+# define SCIF_ORER	0x0001		/* Overrun error bit */
 # define SCSCR_INIT(port)	0x3a	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 #elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
       defined(CONFIG_CPU_SUBTYPE_SH7203) || \
diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c
index ab69c1b..c2747bc 100644
--- a/drivers/staging/panel/panel.c
+++ b/drivers/staging/panel/panel.c
@@ -2164,19 +2164,20 @@
 	if (scan_timer.function != NULL)
 		del_timer(&scan_timer);
 
-	if (keypad_enabled)
-		misc_deregister(&keypad_dev);
+	if (pprt != NULL) {
+		if (keypad_enabled)
+			misc_deregister(&keypad_dev);
 
-	if (lcd_enabled) {
-		panel_lcd_print("\x0cLCD driver " PANEL_VERSION
-				"\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-");
-		misc_deregister(&lcd_dev);
+		if (lcd_enabled) {
+			panel_lcd_print("\x0cLCD driver " PANEL_VERSION
+					"\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-");
+			misc_deregister(&lcd_dev);
+		}
+
+		/* TODO: free all input signals */
+		parport_release(pprt);
+		parport_unregister_device(pprt);
 	}
-
-	/* TODO: free all input signals */
-
-	parport_release(pprt);
-	parport_unregister_device(pprt);
 	parport_unregister_driver(&panel_driver);
 }
 
diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig
index 79c225a..f636296 100644
--- a/drivers/staging/rtl8187se/Kconfig
+++ b/drivers/staging/rtl8187se/Kconfig
@@ -1,5 +1,6 @@
 config RTL8187SE
 	tristate "RealTek RTL8187SE Wireless LAN NIC driver"
 	depends on PCI
+	depends on WIRELESS_EXT && COMPAT_NET_DEV_OPS
 	default N
 	---help---
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c
index af64cfb..7370296 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c
@@ -234,20 +234,21 @@
 void ieee80211_crypto_deinit(void)
 {
 	struct list_head *ptr, *n;
+	struct ieee80211_crypto_alg *alg = NULL;
 
 	if (hcrypt == NULL)
 		return;
 
-	for (ptr = hcrypt->algs.next, n = ptr->next; ptr != &hcrypt->algs;
-	     ptr = n, n = ptr->next) {
-		struct ieee80211_crypto_alg *alg =
-			(struct ieee80211_crypto_alg *) ptr;
-		list_del(ptr);
-		printk(KERN_DEBUG "ieee80211_crypt: unregistered algorithm "
-		       "'%s' (deinit)\n", alg->ops->name);
-		kfree(alg);
+	list_for_each_safe(ptr, n, &hcrypt->algs) {
+		alg = list_entry(ptr, struct ieee80211_crypto_alg, list);
+		if (alg) {
+			list_del(ptr);
+			printk(KERN_DEBUG
+			       "ieee80211_crypt: unregistered algorithm '%s' (deinit)\n",
+			       alg->ops->name);
+			kfree(alg);
+		}
 	}
-
 	kfree(hcrypt);
 }
 
diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
index 9453495..66de5cc 100644
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -6161,10 +6161,10 @@
 {
 	pci_unregister_driver (&rtl8180_pci_driver);
 	rtl8180_proc_module_remove();
-	ieee80211_crypto_deinit();
 	ieee80211_crypto_tkip_exit();
 	ieee80211_crypto_ccmp_exit();
 	ieee80211_crypto_wep_exit();
+	ieee80211_crypto_deinit();
 	DMESG("Exiting");
 }
 
diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index b003f9a..f716b2e 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -319,16 +319,18 @@
 	struct usb_device *udev = interface_to_usbdev(intf);
 	struct wbsoft_priv *priv;
 	struct ieee80211_hw *dev;
-	int err;
+	int nr, err;
 
 	usb_get_dev(udev);
 
 	// 20060630.2 Check the device if it already be opened
-	err = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
-			      0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN,
-			      0x0, 0x400, &ltmp, 4, HZ*100 );
-	if (err)
+	nr = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
+			     0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN,
+			     0x0, 0x400, &ltmp, 4, HZ*100 );
+	if (nr < 0) {
+		err = nr;
 		goto error;
+	}
 
 	ltmp = cpu_to_le32(ltmp);
 	if (ltmp) {  // Is already initialized?
@@ -337,8 +339,10 @@
 	}
 
 	dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops);
-	if (!dev)
+	if (!dev) {
+		err = -ENOMEM;
 		goto error;
+	}
 
 	priv = dev->priv;
 
@@ -369,9 +373,11 @@
 	}
 
 	dev->extra_tx_headroom = 12;	/* FIXME */
-	dev->flags = 0;
+	dev->flags = IEEE80211_HW_SIGNAL_UNSPEC;
+	dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
 
 	dev->channel_change_time = 1000;
+	dev->max_signal = 100;
 	dev->queues = 1;
 
 	dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &wbsoft_band_2GHz;
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 326dd7f..b3d5a23 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1376,6 +1376,15 @@
 	{ USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
+	{ USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
+	},
+	{ USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */
+	.driver_info = NO_UNION_NORMAL, /* union descriptor misplaced on
+					   data interface instead of
+					   communications interface.
+					   Maybe we should define a new
+					   quirk for this. */
+	},
 
 	/* control interfaces with various AT-command sets */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 31fb204..49e7f56 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -653,7 +653,7 @@
 		if (result <= 0 && result != -ETIMEDOUT)
 			continue;
 		if (result > 1 && ((u8 *)buf)[1] != type) {
-			result = -EPROTO;
+			result = -ENODATA;
 			continue;
 		}
 		break;
@@ -696,8 +696,13 @@
 			USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
 			(USB_DT_STRING << 8) + index, langid, buf, size,
 			USB_CTRL_GET_TIMEOUT);
-		if (!(result == 0 || result == -EPIPE))
-			break;
+		if (result == 0 || result == -EPIPE)
+			continue;
+		if (result > 1 && ((u8 *) buf)[1] != USB_DT_STRING) {
+			result = -ENODATA;
+			continue;
+		}
+		break;
 	}
 	return result;
 }
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 3219d13..e55fef5 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -191,6 +191,7 @@
 	boolean "OMAP USB Device Controller"
 	depends on ARCH_OMAP
 	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
+	select USB_OTG_UTILS if ARCH_OMAP
 	help
 	   Many Texas Instruments OMAP processors have flexible full
 	   speed USB device controllers, with support for up to 30
diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c
index 80c2e7e..38aa896 100644
--- a/drivers/usb/gadget/f_obex.c
+++ b/drivers/usb/gadget/f_obex.c
@@ -366,9 +366,9 @@
 		f->hs_descriptors = usb_copy_descriptors(hs_function);
 
 		obex->hs.obex_in = usb_find_endpoint(hs_function,
-				f->descriptors, &obex_hs_ep_in_desc);
+				f->hs_descriptors, &obex_hs_ep_in_desc);
 		obex->hs.obex_out = usb_find_endpoint(hs_function,
-				f->descriptors, &obex_hs_ep_out_desc);
+				f->hs_descriptors, &obex_hs_ep_out_desc);
 	}
 
 	/* Avoid letting this gadget enumerate until the userspace
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index b10fa31..1ab9dac 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -3879,7 +3879,11 @@
 	mod_data.protocol_type = USB_SC_SCSI;
 	mod_data.protocol_name = "Transparent SCSI";
 
-	if (gadget_is_sh(fsg->gadget))
+	/* Some peripheral controllers are known not to be able to
+	 * halt bulk endpoints correctly.  If one of them is present,
+	 * disable stalls.
+	 */
+	if (gadget_is_sh(fsg->gadget) || gadget_is_at91(fsg->gadget))
 		mod_data.can_stall = 0;
 
 	if (mod_data.release == 0xffff) {	// Parameter wasn't set
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index f3c6703..d8d9a52 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -404,7 +404,10 @@
 	}
 	if (zlt)
 		tmp |= EP_QUEUE_HEAD_ZLT_SEL;
+
 	p_QH->max_pkt_length = cpu_to_le32(tmp);
+	p_QH->next_dtd_ptr = 1;
+	p_QH->size_ioc_int_sts = 0;
 
 	return;
 }
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 4725d15..e551bb3 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -485,6 +485,7 @@
 	 * periodic_size can shrink by USBCMD update if hcc_params allows.
 	 */
 	ehci->periodic_size = DEFAULT_I_TDPS;
+	INIT_LIST_HEAD(&ehci->cached_itd_list);
 	if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
 		return retval;
 
@@ -497,6 +498,7 @@
 
 	ehci->reclaim = NULL;
 	ehci->next_uframe = -1;
+	ehci->clock_frame = -1;
 
 	/*
 	 * dedicate a qh for the async ring head, since we couldn't unlink
diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c
index 0431397..10d5291 100644
--- a/drivers/usb/host/ehci-mem.c
+++ b/drivers/usb/host/ehci-mem.c
@@ -128,6 +128,7 @@
 
 static void ehci_mem_cleanup (struct ehci_hcd *ehci)
 {
+	free_cached_itd_list(ehci);
 	if (ehci->async)
 		qh_put (ehci->async);
 	ehci->async = NULL;
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index a081ee6..07bcb93 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1004,7 +1004,8 @@
 
 		is_in = (stream->bEndpointAddress & USB_DIR_IN) ? 0x10 : 0;
 		stream->bEndpointAddress &= 0x0f;
-		stream->ep->hcpriv = NULL;
+		if (stream->ep)
+			stream->ep->hcpriv = NULL;
 
 		if (stream->rescheduled) {
 			ehci_info (ehci, "ep%d%s-iso rescheduled "
@@ -1653,14 +1654,28 @@
 			(stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out");
 	}
 	iso_stream_put (ehci, stream);
-	/* OK to recycle this ITD now that its completion callback ran. */
+
 done:
 	usb_put_urb(urb);
 	itd->urb = NULL;
-	itd->stream = NULL;
-	list_move(&itd->itd_list, &stream->free_list);
-	iso_stream_put(ehci, stream);
-
+	if (ehci->clock_frame != itd->frame || itd->index[7] != -1) {
+		/* OK to recycle this ITD now. */
+		itd->stream = NULL;
+		list_move(&itd->itd_list, &stream->free_list);
+		iso_stream_put(ehci, stream);
+	} else {
+		/* HW might remember this ITD, so we can't recycle it yet.
+		 * Move it to a safe place until a new frame starts.
+		 */
+		list_move(&itd->itd_list, &ehci->cached_itd_list);
+		if (stream->refcount == 2) {
+			/* If iso_stream_put() were called here, stream
+			 * would be freed.  Instead, just prevent reuse.
+			 */
+			stream->ep->hcpriv = NULL;
+			stream->ep = NULL;
+		}
+	}
 	return retval;
 }
 
@@ -2101,6 +2116,20 @@
 
 /*-------------------------------------------------------------------------*/
 
+static void free_cached_itd_list(struct ehci_hcd *ehci)
+{
+	struct ehci_itd *itd, *n;
+
+	list_for_each_entry_safe(itd, n, &ehci->cached_itd_list, itd_list) {
+		struct ehci_iso_stream	*stream = itd->stream;
+		itd->stream = NULL;
+		list_move(&itd->itd_list, &stream->free_list);
+		iso_stream_put(ehci, stream);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
 static void
 scan_periodic (struct ehci_hcd *ehci)
 {
@@ -2115,10 +2144,17 @@
 	 * Touches as few pages as possible:  cache-friendly.
 	 */
 	now_uframe = ehci->next_uframe;
-	if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
+	if (HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
 		clock = ehci_readl(ehci, &ehci->regs->frame_index);
-	else
+		clock_frame = (clock >> 3) % ehci->periodic_size;
+	} else  {
 		clock = now_uframe + mod - 1;
+		clock_frame = -1;
+	}
+	if (ehci->clock_frame != clock_frame) {
+		free_cached_itd_list(ehci);
+		ehci->clock_frame = clock_frame;
+	}
 	clock %= mod;
 	clock_frame = clock >> 3;
 
@@ -2277,6 +2313,10 @@
 			/* rescan the rest of this frame, then ... */
 			clock = now;
 			clock_frame = clock >> 3;
+			if (ehci->clock_frame != clock_frame) {
+				free_cached_itd_list(ehci);
+				ehci->clock_frame = clock_frame;
+			}
 		} else {
 			now_uframe++;
 			now_uframe %= mod;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index fb7054cc..262b00c 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -87,6 +87,10 @@
 	int			next_uframe;	/* scan periodic, start here */
 	unsigned		periodic_sched;	/* periodic activity count */
 
+	/* list of itds completed while clock_frame was still active */
+	struct list_head	cached_itd_list;
+	unsigned		clock_frame;
+
 	/* per root hub port */
 	unsigned long		reset_done [EHCI_MAX_ROOT_PORTS];
 
@@ -220,6 +224,8 @@
 	}
 }
 
+static void free_cached_itd_list(struct ehci_hcd *ehci);
+
 /*-------------------------------------------------------------------------*/
 
 #include <linux/usb/ehci_def.h>
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 5a8fd5d..2dc7606 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -377,18 +377,8 @@
 	u32		revision;
 
 	musb->mregs += DAVINCI_BASE_OFFSET;
-#if 0
-	/* REVISIT there's something odd about clocking, this
-	 * didn't appear do the job ...
-	 */
-	musb->clock = clk_get(pDevice, "usb");
-	if (IS_ERR(musb->clock))
-		return PTR_ERR(musb->clock);
 
-	status = clk_enable(musb->clock);
-	if (status < 0)
-		return -ENODEV;
-#endif
+	clk_enable(musb->clock);
 
 	/* returns zero if e.g. not clocked */
 	revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
@@ -453,5 +443,8 @@
 	}
 
 	phy_off();
+
+	clk_disable(musb->clock);
+
 	return 0;
 }
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 2cc34fa..af77e46 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -115,7 +115,7 @@
 
 
 unsigned musb_debug;
-module_param(musb_debug, uint, S_IRUGO | S_IWUSR);
+module_param_named(debug, musb_debug, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug message level. Default = 0");
 
 #define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
@@ -767,6 +767,7 @@
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
 		case OTG_STATE_A_HOST:
 		case OTG_STATE_A_SUSPEND:
+			usb_hcd_resume_root_hub(musb_to_hcd(musb));
 			musb_root_disconnect(musb);
 			if (musb->a_wait_bcon != 0)
 				musb_platform_try_idle(musb, jiffies
@@ -1815,7 +1816,7 @@
 #ifdef CONFIG_SYSFS
 	device_remove_file(musb->controller, &dev_attr_mode);
 	device_remove_file(musb->controller, &dev_attr_vbus);
-#ifdef CONFIG_USB_MUSB_OTG
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	device_remove_file(musb->controller, &dev_attr_srp);
 #endif
 #endif
@@ -2063,7 +2064,7 @@
 #ifdef CONFIG_SYSFS
 	device_remove_file(musb->controller, &dev_attr_mode);
 	device_remove_file(musb->controller, &dev_attr_vbus);
-#ifdef CONFIG_USB_MUSB_OTG
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	device_remove_file(musb->controller, &dev_attr_srp);
 #endif
 #endif
@@ -2243,10 +2244,10 @@
 	return platform_driver_probe(&musb_driver, musb_probe);
 }
 
-/* make us init after usbcore and before usb
- * gadget and host-side drivers start to register
+/* make us init after usbcore and i2c (transceivers, regulators, etc)
+ * and before usb gadget and host-side drivers start to register
  */
-subsys_initcall(musb_init);
+fs_initcall(musb_init);
 
 static void __exit musb_cleanup(void)
 {
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 4ea3053..c7ebd08 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -575,7 +575,7 @@
 	struct usb_request	*request = &req->request;
 	struct musb_ep		*musb_ep = &musb->endpoints[epnum].ep_out;
 	void __iomem		*epio = musb->endpoints[epnum].regs;
-	u16			fifo_count = 0;
+	unsigned		fifo_count = 0;
 	u16			len = musb_ep->packet_sz;
 
 	csr = musb_readw(epio, MUSB_RXCSR);
@@ -687,7 +687,7 @@
 					len, fifo_count,
 					musb_ep->packet_sz);
 
-			fifo_count = min(len, fifo_count);
+			fifo_count = min_t(unsigned, len, fifo_count);
 
 #ifdef	CONFIG_USB_TUSB_OMAP_DMA
 			if (tusb_dma_omap() && musb_ep->dma) {
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index a035cec..6dbbd07 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -335,16 +335,11 @@
 static struct musb_qh *
 musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
 {
-	int			is_in;
 	struct musb_hw_ep	*ep = qh->hw_ep;
 	struct musb		*musb = ep->musb;
+	int			is_in = usb_pipein(urb->pipe);
 	int			ready = qh->is_ready;
 
-	if (ep->is_shared_fifo)
-		is_in = 1;
-	else
-		is_in = usb_pipein(urb->pipe);
-
 	/* save toggle eagerly, for paranoia */
 	switch (qh->type) {
 	case USB_ENDPOINT_XFER_BULK:
@@ -432,7 +427,7 @@
 	else
 		qh = musb_giveback(qh, urb, urb->status);
 
-	if (qh && qh->is_ready && !list_empty(&qh->hep->urb_list)) {
+	if (qh != NULL && qh->is_ready) {
 		DBG(4, "... next ep%d %cX urb %p\n",
 				hw_ep->epnum, is_in ? 'R' : 'T',
 				next_urb(qh));
@@ -942,8 +937,8 @@
 	switch (musb->ep0_stage) {
 	case MUSB_EP0_IN:
 		fifo_dest = urb->transfer_buffer + urb->actual_length;
-		fifo_count = min(len, ((u16) (urb->transfer_buffer_length
-					- urb->actual_length)));
+		fifo_count = min_t(size_t, len, urb->transfer_buffer_length -
+				   urb->actual_length);
 		if (fifo_count < len)
 			urb->status = -EOVERFLOW;
 
@@ -976,10 +971,9 @@
 		}
 		/* FALLTHROUGH */
 	case MUSB_EP0_OUT:
-		fifo_count = min(qh->maxpacket, ((u16)
-				(urb->transfer_buffer_length
-				- urb->actual_length)));
-
+		fifo_count = min_t(size_t, qh->maxpacket,
+				   urb->transfer_buffer_length -
+				   urb->actual_length);
 		if (fifo_count) {
 			fifo_dest = (u8 *) (urb->transfer_buffer
 					+ urb->actual_length);
@@ -1161,7 +1155,8 @@
 	struct urb		*urb;
 	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
 	void __iomem		*epio = hw_ep->regs;
-	struct musb_qh		*qh = hw_ep->out_qh;
+	struct musb_qh		*qh = hw_ep->is_shared_fifo ? hw_ep->in_qh
+							    : hw_ep->out_qh;
 	u32			status = 0;
 	void __iomem		*mbase = musb->mregs;
 	struct dma_channel	*dma;
@@ -1308,7 +1303,8 @@
 		 * packets before updating TXCSR ... other docs disagree ...
 		 */
 		/* PIO:  start next packet in this URB */
-		wLength = min(qh->maxpacket, (u16) wLength);
+		if (wLength > qh->maxpacket)
+			wLength = qh->maxpacket;
 		musb_write_fifo(hw_ep, wLength, buf);
 		qh->segsize = wLength;
 
@@ -1867,19 +1863,21 @@
 	}
 	qh->type_reg = type_reg;
 
-	/* precompute rxinterval/txinterval register */
-	interval = min((u8)16, epd->bInterval);	/* log encoding */
+	/* Precompute RXINTERVAL/TXINTERVAL register */
 	switch (qh->type) {
 	case USB_ENDPOINT_XFER_INT:
-		/* fullspeed uses linear encoding */
-		if (USB_SPEED_FULL == urb->dev->speed) {
-			interval = epd->bInterval;
-			if (!interval)
-				interval = 1;
+		/*
+		 * Full/low speeds use the  linear encoding,
+		 * high speed uses the logarithmic encoding.
+		 */
+		if (urb->dev->speed <= USB_SPEED_FULL) {
+			interval = max_t(u8, epd->bInterval, 1);
+			break;
 		}
 		/* FALLTHROUGH */
 	case USB_ENDPOINT_XFER_ISOC:
-		/* iso always uses log encoding */
+		/* ISO always uses logarithmic encoding */
+		interval = min_t(u8, epd->bInterval, 16);
 		break;
 	default:
 		/* REVISIT we actually want to use NAK limits, hinting to the
@@ -2037,9 +2035,9 @@
 		goto done;
 
 	/* Any URB not actively programmed into endpoint hardware can be
-	 * immediately given back.  Such an URB must be at the head of its
+	 * immediately given back; that's any URB not at the head of an
 	 * endpoint queue, unless someday we get real DMA queues.  And even
-	 * then, it might not be known to the hardware...
+	 * if it's at the head, it might not be known to the hardware...
 	 *
 	 * Otherwise abort current transfer, pending dma, etc.; urb->status
 	 * has already been updated.  This is a synchronous abort; it'd be
@@ -2078,6 +2076,15 @@
 		qh->is_ready = 0;
 		__musb_giveback(musb, urb, 0);
 		qh->is_ready = ready;
+
+		/* If nothing else (usually musb_giveback) is using it
+		 * and its URB list has emptied, recycle this qh.
+		 */
+		if (ready && list_empty(&qh->hep->urb_list)) {
+			qh->hep->hcpriv = NULL;
+			list_del(&qh->ring);
+			kfree(qh);
+		}
 	} else
 		ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
 done:
@@ -2093,15 +2100,16 @@
 	unsigned long		flags;
 	struct musb		*musb = hcd_to_musb(hcd);
 	u8			is_in = epnum & USB_DIR_IN;
-	struct musb_qh		*qh = hep->hcpriv;
-	struct urb		*urb, *tmp;
+	struct musb_qh		*qh;
+	struct urb		*urb;
 	struct list_head	*sched;
 
-	if (!qh)
-		return;
-
 	spin_lock_irqsave(&musb->lock, flags);
 
+	qh = hep->hcpriv;
+	if (qh == NULL)
+		goto exit;
+
 	switch (qh->type) {
 	case USB_ENDPOINT_XFER_CONTROL:
 		sched = &musb->control;
@@ -2135,13 +2143,28 @@
 
 		/* cleanup */
 		musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
-	} else
-		urb = NULL;
 
-	/* then just nuke all the others */
-	list_for_each_entry_safe_from(urb, tmp, &hep->urb_list, urb_list)
-		musb_giveback(qh, urb, -ESHUTDOWN);
+		/* Then nuke all the others ... and advance the
+		 * queue on hw_ep (e.g. bulk ring) when we're done.
+		 */
+		while (!list_empty(&hep->urb_list)) {
+			urb = next_urb(qh);
+			urb->status = -ESHUTDOWN;
+			musb_advance_schedule(musb, urb, qh->hw_ep, is_in);
+		}
+	} else {
+		/* Just empty the queue; the hardware is busy with
+		 * other transfers, and since !qh->is_ready nothing
+		 * will activate any of these as it advances.
+		 */
+		while (!list_empty(&hep->urb_list))
+			__musb_giveback(musb, next_urb(qh), -ESHUTDOWN);
 
+		hep->hcpriv = NULL;
+		list_del(&qh->ring);
+		kfree(qh);
+	}
+exit:
 	spin_unlock_irqrestore(&musb->lock, flags);
 }
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index bfd0b68..b7c132b 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -294,7 +294,11 @@
 
 /* Ericsson products */
 #define ERICSSON_VENDOR_ID			0x0bdb
-#define ERICSSON_PRODUCT_F3507G			0x1900
+#define ERICSSON_PRODUCT_F3507G_1		0x1900
+#define ERICSSON_PRODUCT_F3507G_2		0x1902
+
+#define BENQ_VENDOR_ID				0x04a5
+#define BENQ_PRODUCT_H10			0x4068
 
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
@@ -509,7 +513,10 @@
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
-	{ USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G) },
+	{ USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G_1) },
+	{ USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G_2) },
+	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
+	{ USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 50dc33a..6f59c8e 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -907,13 +907,13 @@
 		"Genesys Logic",
 		"USB to IDE Optical",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
+		US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
 
 UNUSUAL_DEV(  0x05e3, 0x0702, 0x0000, 0xffff,
 		"Genesys Logic",
 		"USB to IDE Disk",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
+		US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Ben Efros <ben@pc-doctor.com> */
 UNUSUAL_DEV(  0x05e3, 0x0723, 0x9451, 0x9451,
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 2181ce4..35e8eb0 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -1853,13 +1853,14 @@
  *  Initialisation
  */
 
-#ifdef CONFIG_PPC_PMAC
+#ifdef CONFIG_PPC_PMAC__disabled
 static void aty128_early_resume(void *data)
 {
         struct aty128fb_par *par = data;
 
 	if (try_acquire_console_sem())
 		return;
+	pci_restore_state(par->pdev);
 	aty128_do_resume(par->pdev);
 	release_console_sem();
 }
@@ -1907,7 +1908,14 @@
 		/* Indicate sleep capability */
 		if (par->chip_gen == rage_M3) {
 			pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, NULL, 0, 1);
+#if 0 /* Disable the early video resume hack for now as it's causing problems, among
+       * others we now rely on the PCI core restoring the config space for us, which
+       * isn't the case with that hack, and that code path causes various things to
+       * be called with interrupts off while they shouldn't. I'm leaving the code in
+       * as it can be useful for debugging purposes
+       */
 			pmac_set_early_video_resume(aty128_early_resume, par);
+#endif
 		}
 
 		/* Find default mode */
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index ca5f0dc..81603f8 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -2762,12 +2762,13 @@
 	return rc;
 }
 
-#ifdef CONFIG_PPC_OF
+#ifdef CONFIG_PPC_OF__disabled
 static void radeonfb_early_resume(void *data)
 {
         struct radeonfb_info *rinfo = data;
 
 	rinfo->no_schedule = 1;
+	pci_restore_state(rinfo->pdev);
 	radeonfb_pci_resume(rinfo->pdev);
 	rinfo->no_schedule = 0;
 }
@@ -2834,7 +2835,14 @@
 		 */
 		if (rinfo->pm_mode != radeon_pm_none) {
 			pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, rinfo->of_node, 0, 1);
+#if 0 /* Disable the early video resume hack for now as it's causing problems, among
+       * others we now rely on the PCI core restoring the config space for us, which
+       * isn't the case with that hack, and that code path causes various things to
+       * be called with interrupts off while they shouldn't. I'm leaving the code in
+       * as it can be useful for debugging purposes
+       */
 			pmac_set_early_video_resume(radeonfb_early_resume, rinfo);
+#endif
 		}
 
 #if 0
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index a24e680..2e94019 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -993,6 +993,7 @@
 	struct i810fb_par *par = info->par;
 	int line_length, vidmem, mode_valid = 0, retval = 0;
 	u32 vyres = var->yres_virtual, vxres = var->xres_virtual;
+
 	/*
 	 *  Memory limit
 	 */
@@ -1002,12 +1003,12 @@
 	if (vidmem > par->fb.size) {
 		vyres = par->fb.size/line_length;
 		if (vyres < var->yres) {
-			vyres = yres;
+			vyres = info->var.yres;
 			vxres = par->fb.size/vyres;
 			vxres /= var->bits_per_pixel >> 3;
 			line_length = get_line_length(par, vxres, 
 						      var->bits_per_pixel);
-			vidmem = line_length * yres;
+			vidmem = line_length * info->var.yres;
 			if (vxres < var->xres) {
 				printk("i810fb: required video memory, "
 				       "%d bytes, for %dx%d-%d (virtual) "
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 48ff701..2552b9f 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -2230,7 +2230,7 @@
 
 static struct platform_driver pxafb_driver = {
 	.probe		= pxafb_probe,
-	.remove 	= pxafb_remove,
+	.remove 	= __devexit_p(pxafb_remove),
 	.suspend	= pxafb_suspend,
 	.resume		= pxafb_resume,
 	.driver		= {
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 0e2b8fd..2c5d069 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -446,7 +446,6 @@
 {
 	struct sh_mobile_lcdc_chan *ch;
 	struct sh_mobile_lcdc_board_cfg	*board_cfg;
-	unsigned long tmp;
 	int k;
 
 	/* tell the board code to disable the panel */
@@ -456,9 +455,8 @@
 		if (board_cfg->display_off)
 			board_cfg->display_off(board_cfg->board_data);
 
-		/* cleanup deferred io if SYS bus */
-		tmp = ch->cfg.sys_bus_cfg.deferred_io_msec;
-		if (ch->ldmt1r_value & (1 << 12) && tmp) {
+		/* cleanup deferred io if enabled */
+		if (ch->info.fbdefio) {
 			fb_deferred_io_cleanup(&ch->info);
 			ch->info.fbdefio = NULL;
 		}
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index 9e1138a..a411702 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -39,7 +39,7 @@
 {
 	struct w1_gpio_platform_data *pdata = data;
 
-	return gpio_get_value(pdata->pin);
+	return gpio_get_value(pdata->pin) ? 1 : 0;
 }
 
 static int __init w1_gpio_probe(struct platform_device *pdev)
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index 8d0b1fb..1f51366 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -16,6 +16,12 @@
 	  Say Y here if you want to connect 1-wire
 	  simple 64bit memory rom(ds2401/ds2411/ds1990*) to your wire.
 
+config W1_SLAVE_DS2431
+	tristate "1kb EEPROM family support (DS2431)"
+	help
+	  Say Y here if you want to use a 1-wire
+	  1kb EEPROM family device (DS2431)
+
 config W1_SLAVE_DS2433
 	tristate "4kb EEPROM family support (DS2433)"
 	help
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile
index 990f400..f1f51f1 100644
--- a/drivers/w1/slaves/Makefile
+++ b/drivers/w1/slaves/Makefile
@@ -4,6 +4,7 @@
 
 obj-$(CONFIG_W1_SLAVE_THERM)	+= w1_therm.o
 obj-$(CONFIG_W1_SLAVE_SMEM)	+= w1_smem.o
+obj-$(CONFIG_W1_SLAVE_DS2431)	+= w1_ds2431.o
 obj-$(CONFIG_W1_SLAVE_DS2433)	+= w1_ds2433.o
 obj-$(CONFIG_W1_SLAVE_DS2760)	+= w1_ds2760.o
 obj-$(CONFIG_W1_SLAVE_BQ27000)	+= w1_bq27000.o
diff --git a/drivers/w1/slaves/w1_ds2433.c b/drivers/w1/slaves/w1_ds2433.c
index 858c16a..1394471 100644
--- a/drivers/w1/slaves/w1_ds2433.c
+++ b/drivers/w1/slaves/w1_ds2433.c
@@ -156,6 +156,9 @@
  */
 static int w1_f23_write(struct w1_slave *sl, int addr, int len, const u8 *data)
 {
+#ifdef CONFIG_W1_SLAVE_DS2433_CRC
+	struct w1_f23_data *f23 = sl->family_data;
+#endif
 	u8 wrbuf[4];
 	u8 rdbuf[W1_PAGE_SIZE + 3];
 	u8 es = (addr + len - 1) & 0x1f;
@@ -196,7 +199,9 @@
 
 	/* Reset the bus to wake up the EEPROM (this may not be needed) */
 	w1_reset_bus(sl->master);
-
+#ifdef CONFIG_W1_SLAVE_DS2433_CRC
+	f23->validcrc &= ~(1 << (addr >> W1_PAGE_BITS));
+#endif
 	return 0;
 }
 
diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c
index f0c2b7a..734d980 100644
--- a/drivers/watchdog/gef_wdt.c
+++ b/drivers/watchdog/gef_wdt.c
@@ -269,7 +269,7 @@
 	bus_clk = 133; /* in MHz */
 
 	freq = fsl_get_sys_freq();
-	if (freq > 0)
+	if (freq != -1)
 		bus_clk = freq;
 
 	/* Map devices registers into memory */
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
index 0b798fd..74c92d3 100644
--- a/drivers/watchdog/ks8695_wdt.c
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -21,6 +21,7 @@
 #include <linux/watchdog.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
+#include <mach/timex.h>
 #include <mach/regs-timer.h>
 
 #define WDT_DEFAULT_TIME	5	/* seconds */
diff --git a/drivers/watchdog/orion5x_wdt.c b/drivers/watchdog/orion5x_wdt.c
index 14a339f..b64ae1a 100644
--- a/drivers/watchdog/orion5x_wdt.c
+++ b/drivers/watchdog/orion5x_wdt.c
@@ -29,6 +29,7 @@
 #define  WDT_EN			0x0010
 #define WDT_VAL			(TIMER_VIRT_BASE + 0x0024)
 
+#define ORION5X_TCLK		166666667
 #define WDT_MAX_DURATION	(0xffffffff / ORION5X_TCLK)
 #define WDT_IN_USE		0
 #define WDT_OK_TO_CLOSE		1
diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c
index 57027f4..f3553fa 100644
--- a/drivers/watchdog/rc32434_wdt.c
+++ b/drivers/watchdog/rc32434_wdt.c
@@ -34,104 +34,89 @@
 #include <asm/time.h>
 #include <asm/mach-rc32434/integ.h>
 
-#define MAX_TIMEOUT			20
-#define RC32434_WDT_INTERVAL		(15 * HZ)
-
-#define VERSION "0.2"
+#define VERSION "0.4"
 
 static struct {
-	struct completion stop;
-	int running;
-	struct timer_list timer;
-	int queue;
-	int default_ticks;
 	unsigned long inuse;
 } rc32434_wdt_device;
 
 static struct integ __iomem *wdt_reg;
-static int ticks = 100 * HZ;
 
 static int expect_close;
-static int timeout;
+
+/* Board internal clock speed in Hz,
+ * the watchdog timer ticks at. */
+extern unsigned int idt_cpu_freq;
+
+/* translate wtcompare value to seconds and vice versa */
+#define WTCOMP2SEC(x)	(x / idt_cpu_freq)
+#define SEC2WTCOMP(x)	(x * idt_cpu_freq)
+
+/* Use a default timeout of 20s. This should be
+ * safe for CPU clock speeds up to 400MHz, as
+ * ((2 ^ 32) - 1) / (400MHz / 2) = 21s.  */
+#define WATCHDOG_TIMEOUT 20
+
+static int timeout = WATCHDOG_TIMEOUT;
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
 	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
+/* apply or and nand masks to data read from addr and write back */
+#define SET_BITS(addr, or, nand) \
+	writel((readl(&addr) | or) & ~nand, &addr)
 
 static void rc32434_wdt_start(void)
 {
-	u32 val;
+	u32 or, nand;
 
-	if (!rc32434_wdt_device.inuse) {
-		writel(0, &wdt_reg->wtcount);
+	/* zero the counter before enabling */
+	writel(0, &wdt_reg->wtcount);
 
-		val = RC32434_ERR_WRE;
-		writel(readl(&wdt_reg->errcs) | val, &wdt_reg->errcs);
+	/* don't generate a non-maskable interrupt,
+	 * do a warm reset instead */
+	nand = 1 << RC32434_ERR_WNE;
+	or = 1 << RC32434_ERR_WRE;
 
-		val = RC32434_WTC_EN;
-		writel(readl(&wdt_reg->wtc) | val, &wdt_reg->wtc);
-	}
-	rc32434_wdt_device.running++;
+	/* reset the ERRCS timeout bit in case it's set */
+	nand |= 1 << RC32434_ERR_WTO;
+
+	SET_BITS(wdt_reg->errcs, or, nand);
+
+	/* reset WTC timeout bit and enable WDT */
+	nand = 1 << RC32434_WTC_TO;
+	or = 1 << RC32434_WTC_EN;
+
+	SET_BITS(wdt_reg->wtc, or, nand);
 }
 
 static void rc32434_wdt_stop(void)
 {
-	u32 val;
+	/* Disable WDT */
+	SET_BITS(wdt_reg->wtc, 0, 1 << RC32434_WTC_EN);
+}
 
-	if (rc32434_wdt_device.running) {
+static int rc32434_wdt_set(int new_timeout)
+{
+	int max_to = WTCOMP2SEC((u32)-1);
 
-		val = ~RC32434_WTC_EN;
-		writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc);
-
-		val = ~RC32434_ERR_WRE;
-		writel(readl(&wdt_reg->errcs) & val, &wdt_reg->errcs);
-
-		rc32434_wdt_device.running = 0;
+	if (new_timeout < 0 || new_timeout > max_to) {
+		printk(KERN_ERR KBUILD_MODNAME
+			": timeout value must be between 0 and %d",
+			max_to);
+		return -EINVAL;
 	}
-}
-
-static void rc32434_wdt_set(int new_timeout)
-{
-	u32 cmp = new_timeout * HZ;
-	u32 state, val;
-
 	timeout = new_timeout;
-	/*
-	 * store and disable WTC
-	 */
-	state = (u32)(readl(&wdt_reg->wtc) & RC32434_WTC_EN);
-	val = ~RC32434_WTC_EN;
-	writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc);
+	writel(SEC2WTCOMP(timeout), &wdt_reg->wtcompare);
 
-	writel(0, &wdt_reg->wtcount);
-	writel(cmp, &wdt_reg->wtcompare);
-
-	/*
-	 * restore WTC
-	 */
-
-	writel(readl(&wdt_reg->wtc) | state, &wdt_reg);
+	return 0;
 }
 
-static void rc32434_wdt_reset(void)
+static void rc32434_wdt_ping(void)
 {
-	ticks = rc32434_wdt_device.default_ticks;
-}
-
-static void rc32434_wdt_update(unsigned long unused)
-{
-	if (rc32434_wdt_device.running)
-		ticks--;
-
 	writel(0, &wdt_reg->wtcount);
-
-	if (rc32434_wdt_device.queue && ticks)
-		mod_timer(&rc32434_wdt_device.timer,
-			jiffies + RC32434_WDT_INTERVAL);
-	else
-		complete(&rc32434_wdt_device.stop);
 }
 
 static int rc32434_wdt_open(struct inode *inode, struct file *file)
@@ -142,19 +127,23 @@
 	if (nowayout)
 		__module_get(THIS_MODULE);
 
+	rc32434_wdt_start();
+	rc32434_wdt_ping();
+
 	return nonseekable_open(inode, file);
 }
 
 static int rc32434_wdt_release(struct inode *inode, struct file *file)
 {
-	if (expect_close && nowayout == 0) {
+	if (expect_close == 42) {
 		rc32434_wdt_stop();
 		printk(KERN_INFO KBUILD_MODNAME ": disabling watchdog timer\n");
 		module_put(THIS_MODULE);
-	} else
+	} else {
 		printk(KERN_CRIT KBUILD_MODNAME
 			": device closed unexpectedly. WDT will not stop !\n");
-
+		rc32434_wdt_ping();
+	}
 	clear_bit(0, &rc32434_wdt_device.inuse);
 	return 0;
 }
@@ -174,10 +163,10 @@
 				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
-					expect_close = 1;
+					expect_close = 42;
 			}
 		}
-		rc32434_wdt_update(0);
+		rc32434_wdt_ping();
 		return len;
 	}
 	return 0;
@@ -197,11 +186,11 @@
 	};
 	switch (cmd) {
 	case WDIOC_KEEPALIVE:
-		rc32434_wdt_reset();
+		rc32434_wdt_ping();
 		break;
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
-		value = readl(&wdt_reg->wtcount);
+		value = 0;
 		if (copy_to_user(argp, &value, sizeof(int)))
 			return -EFAULT;
 		break;
@@ -218,6 +207,7 @@
 			break;
 		case WDIOS_DISABLECARD:
 			rc32434_wdt_stop();
+			break;
 		default:
 			return -EINVAL;
 		}
@@ -225,11 +215,9 @@
 	case WDIOC_SETTIMEOUT:
 		if (copy_from_user(&new_timeout, argp, sizeof(int)))
 			return -EFAULT;
-		if (new_timeout < 1)
+		if (rc32434_wdt_set(new_timeout))
 			return -EINVAL;
-		if (new_timeout > MAX_TIMEOUT)
-			return -EINVAL;
-		rc32434_wdt_set(new_timeout);
+		/* Fall through */
 	case WDIOC_GETTIMEOUT:
 		return copy_to_user(argp, &timeout, sizeof(int));
 	default:
@@ -254,15 +242,15 @@
 	.fops	= &rc32434_wdt_fops,
 };
 
-static char banner[] = KERN_INFO KBUILD_MODNAME
+static char banner[] __devinitdata = KERN_INFO KBUILD_MODNAME
 		": Watchdog Timer version " VERSION ", timer margin: %d sec\n";
 
-static int rc32434_wdt_probe(struct platform_device *pdev)
+static int __devinit rc32434_wdt_probe(struct platform_device *pdev)
 {
 	int ret;
 	struct resource *r;
 
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb500_wdt_res");
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb532_wdt_res");
 	if (!r) {
 		printk(KERN_ERR KBUILD_MODNAME
 			"failed to retrieve resources\n");
@@ -277,24 +265,12 @@
 	}
 
 	ret = misc_register(&rc32434_wdt_miscdev);
-
 	if (ret < 0) {
 		printk(KERN_ERR KBUILD_MODNAME
 			"failed to register watchdog device\n");
 		goto unmap;
 	}
 
-	init_completion(&rc32434_wdt_device.stop);
-	rc32434_wdt_device.queue = 0;
-
-	clear_bit(0, &rc32434_wdt_device.inuse);
-
-	setup_timer(&rc32434_wdt_device.timer, rc32434_wdt_update, 0L);
-
-	rc32434_wdt_device.default_ticks = ticks;
-
-	rc32434_wdt_start();
-
 	printk(banner, timeout);
 
 	return 0;
@@ -304,23 +280,17 @@
 	return ret;
 }
 
-static int rc32434_wdt_remove(struct platform_device *pdev)
+static int __devexit rc32434_wdt_remove(struct platform_device *pdev)
 {
-	if (rc32434_wdt_device.queue) {
-		rc32434_wdt_device.queue = 0;
-		wait_for_completion(&rc32434_wdt_device.stop);
-	}
 	misc_deregister(&rc32434_wdt_miscdev);
-
 	iounmap(wdt_reg);
-
 	return 0;
 }
 
 static struct platform_driver rc32434_wdt = {
 	.probe	= rc32434_wdt_probe,
-	.remove = rc32434_wdt_remove,
-	.driver = {
+	.remove	= __devexit_p(rc32434_wdt_remove),
+	.driver	= {
 		.name = "rc32434_wdt",
 	}
 };
diff --git a/fs/Makefile b/fs/Makefile
index 38bc735..dc20db3 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -69,10 +69,12 @@
 # Do not add any filesystems before this line
 obj-$(CONFIG_REISERFS_FS)	+= reiserfs/
 obj-$(CONFIG_EXT3_FS)		+= ext3/ # Before ext2 so root fs can be ext3
-obj-$(CONFIG_EXT4_FS)		+= ext4/ # Before ext2 so root fs can be ext4
+obj-$(CONFIG_EXT2_FS)		+= ext2/
+# We place ext4 after ext2 so plain ext2 root fs's are mounted using ext2
+# unless explicitly requested by rootfstype
+obj-$(CONFIG_EXT4_FS)		+= ext4/
 obj-$(CONFIG_JBD)		+= jbd/
 obj-$(CONFIG_JBD2)		+= jbd2/
-obj-$(CONFIG_EXT2_FS)		+= ext2/
 obj-$(CONFIG_CRAMFS)		+= cramfs/
 obj-$(CONFIG_SQUASHFS)		+= squashfs/
 obj-y				+= ramfs/
diff --git a/fs/bio.c b/fs/bio.c
index 72ab251..124b95c 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -302,7 +302,7 @@
 struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs)
 {
 	struct bio *bio = NULL;
-	void *p;
+	void *uninitialized_var(p);
 
 	if (bs) {
 		p = mempool_alloc(bs->bio_pool, gfp_mask);
diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h
index a8c9693..72677ce 100644
--- a/fs/btrfs/btrfs_inode.h
+++ b/fs/btrfs/btrfs_inode.h
@@ -66,6 +66,9 @@
 	 */
 	struct list_head delalloc_inodes;
 
+	/* the space_info for where this inode's data allocations are done */
+	struct btrfs_space_info *space_info;
+
 	/* full 64 bit generation number, struct vfs_inode doesn't have a big
 	 * enough field for this.
 	 */
@@ -94,6 +97,11 @@
 	 */
 	u64 delalloc_bytes;
 
+	/* total number of bytes that may be used for this inode for
+	 * delalloc
+	 */
+	u64 reserved_bytes;
+
 	/*
 	 * the size of the file stored in the metadata on disk.  data=ordered
 	 * means the in-memory i_size might be larger than the size on disk
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 42491d7..37f31b5 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -277,7 +277,7 @@
 	if (*cow_ret == buf)
 		unlock_orig = 1;
 
-	WARN_ON(!btrfs_tree_locked(buf));
+	btrfs_assert_tree_locked(buf);
 
 	if (parent)
 		parent_start = parent->start;
@@ -2365,7 +2365,7 @@
 	if (slot >= btrfs_header_nritems(upper) - 1)
 		return 1;
 
-	WARN_ON(!btrfs_tree_locked(path->nodes[1]));
+	btrfs_assert_tree_locked(path->nodes[1]);
 
 	right = read_node_slot(root, upper, slot + 1);
 	btrfs_tree_lock(right);
@@ -2562,7 +2562,7 @@
 	if (right_nritems == 0)
 		return 1;
 
-	WARN_ON(!btrfs_tree_locked(path->nodes[1]));
+	btrfs_assert_tree_locked(path->nodes[1]);
 
 	left = read_node_slot(root, path->nodes[1], slot - 1);
 	btrfs_tree_lock(left);
@@ -4101,7 +4101,7 @@
 
 		next = read_node_slot(root, c, slot);
 		if (!path->skip_locking) {
-			WARN_ON(!btrfs_tree_locked(c));
+			btrfs_assert_tree_locked(c);
 			btrfs_tree_lock(next);
 			btrfs_set_lock_blocking(next);
 		}
@@ -4126,7 +4126,7 @@
 			reada_for_search(root, path, level, slot, 0);
 		next = read_node_slot(root, next, 0);
 		if (!path->skip_locking) {
-			WARN_ON(!btrfs_tree_locked(path->nodes[level]));
+			btrfs_assert_tree_locked(path->nodes[level]);
 			btrfs_tree_lock(next);
 			btrfs_set_lock_blocking(next);
 		}
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 766b31a..82491ba 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -596,13 +596,27 @@
 
 struct btrfs_space_info {
 	u64 flags;
-	u64 total_bytes;
-	u64 bytes_used;
-	u64 bytes_pinned;
-	u64 bytes_reserved;
-	u64 bytes_readonly;
-	int full;
-	int force_alloc;
+
+	u64 total_bytes;	/* total bytes in the space */
+	u64 bytes_used;		/* total bytes used on disk */
+	u64 bytes_pinned;	/* total bytes pinned, will be freed when the
+				   transaction finishes */
+	u64 bytes_reserved;	/* total bytes the allocator has reserved for
+				   current allocations */
+	u64 bytes_readonly;	/* total bytes that are read only */
+
+	/* delalloc accounting */
+	u64 bytes_delalloc;	/* number of bytes reserved for allocation,
+				   this space is not necessarily reserved yet
+				   by the allocator */
+	u64 bytes_may_use;	/* number of bytes that may be used for
+				   delalloc */
+
+	int full;		/* indicates that we cannot allocate any more
+				   chunks for this space */
+	int force_alloc;	/* set if we need to force a chunk alloc for
+				   this space */
+
 	struct list_head list;
 
 	/* for block groups in our same type */
@@ -1782,6 +1796,16 @@
 int btrfs_cleanup_reloc_trees(struct btrfs_root *root);
 int btrfs_reloc_clone_csums(struct inode *inode, u64 file_pos, u64 len);
 u64 btrfs_reduce_alloc_profile(struct btrfs_root *root, u64 flags);
+void btrfs_set_inode_space_info(struct btrfs_root *root, struct inode *ionde);
+int btrfs_check_metadata_free_space(struct btrfs_root *root);
+int btrfs_check_data_free_space(struct btrfs_root *root, struct inode *inode,
+				u64 bytes);
+void btrfs_free_reserved_data_space(struct btrfs_root *root,
+				    struct inode *inode, u64 bytes);
+void btrfs_delalloc_reserve_space(struct btrfs_root *root, struct inode *inode,
+				 u64 bytes);
+void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode,
+			      u64 bytes);
 /* ctree.c */
 int btrfs_previous_item(struct btrfs_root *root,
 			struct btrfs_path *path, u64 min_objectid,
@@ -2027,8 +2051,6 @@
 unsigned long btrfs_force_ra(struct address_space *mapping,
 			      struct file_ra_state *ra, struct file *file,
 			      pgoff_t offset, pgoff_t last_index);
-int btrfs_check_free_space(struct btrfs_root *root, u64 num_required,
-			   int for_del);
 int btrfs_page_mkwrite(struct vm_area_struct *vma, struct page *page);
 int btrfs_readpage(struct file *file, struct page *page);
 void btrfs_delete_inode(struct inode *inode);
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index adda739..3e18175 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -857,7 +857,7 @@
 	struct inode *btree_inode = root->fs_info->btree_inode;
 	if (btrfs_header_generation(buf) ==
 	    root->fs_info->running_transaction->transid) {
-		WARN_ON(!btrfs_tree_locked(buf));
+		btrfs_assert_tree_locked(buf);
 
 		/* ugh, clear_extent_buffer_dirty can be expensive */
 		btrfs_set_lock_blocking(buf);
@@ -2361,7 +2361,7 @@
 
 	btrfs_set_lock_blocking(buf);
 
-	WARN_ON(!btrfs_tree_locked(buf));
+	btrfs_assert_tree_locked(buf);
 	if (transid != root->fs_info->generation) {
 		printk(KERN_CRIT "btrfs transid mismatch buffer %llu, "
 		       "found %llu running %llu\n",
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 0a5d796..9abf81f 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -60,6 +60,10 @@
 			      u64 bytenr, u64 num_bytes, int alloc,
 			      int mark_free);
 
+static int do_chunk_alloc(struct btrfs_trans_handle *trans,
+			  struct btrfs_root *extent_root, u64 alloc_bytes,
+			  u64 flags, int force);
+
 static int block_group_bits(struct btrfs_block_group_cache *cache, u64 bits)
 {
 	return (cache->flags & bits) == bits;
@@ -1909,6 +1913,7 @@
 	found->bytes_pinned = 0;
 	found->bytes_reserved = 0;
 	found->bytes_readonly = 0;
+	found->bytes_delalloc = 0;
 	found->full = 0;
 	found->force_alloc = 0;
 	*space_info = found;
@@ -1972,6 +1977,233 @@
 	return flags;
 }
 
+static u64 btrfs_get_alloc_profile(struct btrfs_root *root, u64 data)
+{
+	struct btrfs_fs_info *info = root->fs_info;
+	u64 alloc_profile;
+
+	if (data) {
+		alloc_profile = info->avail_data_alloc_bits &
+			info->data_alloc_profile;
+		data = BTRFS_BLOCK_GROUP_DATA | alloc_profile;
+	} else if (root == root->fs_info->chunk_root) {
+		alloc_profile = info->avail_system_alloc_bits &
+			info->system_alloc_profile;
+		data = BTRFS_BLOCK_GROUP_SYSTEM | alloc_profile;
+	} else {
+		alloc_profile = info->avail_metadata_alloc_bits &
+			info->metadata_alloc_profile;
+		data = BTRFS_BLOCK_GROUP_METADATA | alloc_profile;
+	}
+
+	return btrfs_reduce_alloc_profile(root, data);
+}
+
+void btrfs_set_inode_space_info(struct btrfs_root *root, struct inode *inode)
+{
+	u64 alloc_target;
+
+	alloc_target = btrfs_get_alloc_profile(root, 1);
+	BTRFS_I(inode)->space_info = __find_space_info(root->fs_info,
+						       alloc_target);
+}
+
+/*
+ * for now this just makes sure we have at least 5% of our metadata space free
+ * for use.
+ */
+int btrfs_check_metadata_free_space(struct btrfs_root *root)
+{
+	struct btrfs_fs_info *info = root->fs_info;
+	struct btrfs_space_info *meta_sinfo;
+	u64 alloc_target, thresh;
+	int committed = 0, ret;
+
+	/* get the space info for where the metadata will live */
+	alloc_target = btrfs_get_alloc_profile(root, 0);
+	meta_sinfo = __find_space_info(info, alloc_target);
+
+again:
+	spin_lock(&meta_sinfo->lock);
+	if (!meta_sinfo->full)
+		thresh = meta_sinfo->total_bytes * 80;
+	else
+		thresh = meta_sinfo->total_bytes * 95;
+
+	do_div(thresh, 100);
+
+	if (meta_sinfo->bytes_used + meta_sinfo->bytes_reserved +
+	    meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly > thresh) {
+		struct btrfs_trans_handle *trans;
+		if (!meta_sinfo->full) {
+			meta_sinfo->force_alloc = 1;
+			spin_unlock(&meta_sinfo->lock);
+
+			trans = btrfs_start_transaction(root, 1);
+			if (!trans)
+				return -ENOMEM;
+
+			ret = do_chunk_alloc(trans, root->fs_info->extent_root,
+					     2 * 1024 * 1024, alloc_target, 0);
+			btrfs_end_transaction(trans, root);
+			goto again;
+		}
+		spin_unlock(&meta_sinfo->lock);
+
+		if (!committed) {
+			committed = 1;
+			trans = btrfs_join_transaction(root, 1);
+			if (!trans)
+				return -ENOMEM;
+			ret = btrfs_commit_transaction(trans, root);
+			if (ret)
+				return ret;
+			goto again;
+		}
+		return -ENOSPC;
+	}
+	spin_unlock(&meta_sinfo->lock);
+
+	return 0;
+}
+
+/*
+ * This will check the space that the inode allocates from to make sure we have
+ * enough space for bytes.
+ */
+int btrfs_check_data_free_space(struct btrfs_root *root, struct inode *inode,
+				u64 bytes)
+{
+	struct btrfs_space_info *data_sinfo;
+	int ret = 0, committed = 0;
+
+	/* make sure bytes are sectorsize aligned */
+	bytes = (bytes + root->sectorsize - 1) & ~((u64)root->sectorsize - 1);
+
+	data_sinfo = BTRFS_I(inode)->space_info;
+again:
+	/* make sure we have enough space to handle the data first */
+	spin_lock(&data_sinfo->lock);
+	if (data_sinfo->total_bytes - data_sinfo->bytes_used -
+	    data_sinfo->bytes_delalloc - data_sinfo->bytes_reserved -
+	    data_sinfo->bytes_pinned - data_sinfo->bytes_readonly -
+	    data_sinfo->bytes_may_use < bytes) {
+		struct btrfs_trans_handle *trans;
+
+		/*
+		 * if we don't have enough free bytes in this space then we need
+		 * to alloc a new chunk.
+		 */
+		if (!data_sinfo->full) {
+			u64 alloc_target;
+
+			data_sinfo->force_alloc = 1;
+			spin_unlock(&data_sinfo->lock);
+
+			alloc_target = btrfs_get_alloc_profile(root, 1);
+			trans = btrfs_start_transaction(root, 1);
+			if (!trans)
+				return -ENOMEM;
+
+			ret = do_chunk_alloc(trans, root->fs_info->extent_root,
+					     bytes + 2 * 1024 * 1024,
+					     alloc_target, 0);
+			btrfs_end_transaction(trans, root);
+			if (ret)
+				return ret;
+			goto again;
+		}
+		spin_unlock(&data_sinfo->lock);
+
+		/* commit the current transaction and try again */
+		if (!committed) {
+			committed = 1;
+			trans = btrfs_join_transaction(root, 1);
+			if (!trans)
+				return -ENOMEM;
+			ret = btrfs_commit_transaction(trans, root);
+			if (ret)
+				return ret;
+			goto again;
+		}
+
+		printk(KERN_ERR "no space left, need %llu, %llu delalloc bytes"
+		       ", %llu bytes_used, %llu bytes_reserved, "
+		       "%llu bytes_pinned, %llu bytes_readonly, %llu may use"
+		       "%llu total\n", bytes, data_sinfo->bytes_delalloc,
+		       data_sinfo->bytes_used, data_sinfo->bytes_reserved,
+		       data_sinfo->bytes_pinned, data_sinfo->bytes_readonly,
+		       data_sinfo->bytes_may_use, data_sinfo->total_bytes);
+		return -ENOSPC;
+	}
+	data_sinfo->bytes_may_use += bytes;
+	BTRFS_I(inode)->reserved_bytes += bytes;
+	spin_unlock(&data_sinfo->lock);
+
+	return btrfs_check_metadata_free_space(root);
+}
+
+/*
+ * if there was an error for whatever reason after calling
+ * btrfs_check_data_free_space, call this so we can cleanup the counters.
+ */
+void btrfs_free_reserved_data_space(struct btrfs_root *root,
+				    struct inode *inode, u64 bytes)
+{
+	struct btrfs_space_info *data_sinfo;
+
+	/* make sure bytes are sectorsize aligned */
+	bytes = (bytes + root->sectorsize - 1) & ~((u64)root->sectorsize - 1);
+
+	data_sinfo = BTRFS_I(inode)->space_info;
+	spin_lock(&data_sinfo->lock);
+	data_sinfo->bytes_may_use -= bytes;
+	BTRFS_I(inode)->reserved_bytes -= bytes;
+	spin_unlock(&data_sinfo->lock);
+}
+
+/* called when we are adding a delalloc extent to the inode's io_tree */
+void btrfs_delalloc_reserve_space(struct btrfs_root *root, struct inode *inode,
+				  u64 bytes)
+{
+	struct btrfs_space_info *data_sinfo;
+
+	/* get the space info for where this inode will be storing its data */
+	data_sinfo = BTRFS_I(inode)->space_info;
+
+	/* make sure we have enough space to handle the data first */
+	spin_lock(&data_sinfo->lock);
+	data_sinfo->bytes_delalloc += bytes;
+
+	/*
+	 * we are adding a delalloc extent without calling
+	 * btrfs_check_data_free_space first.  This happens on a weird
+	 * writepage condition, but shouldn't hurt our accounting
+	 */
+	if (unlikely(bytes > BTRFS_I(inode)->reserved_bytes)) {
+		data_sinfo->bytes_may_use -= BTRFS_I(inode)->reserved_bytes;
+		BTRFS_I(inode)->reserved_bytes = 0;
+	} else {
+		data_sinfo->bytes_may_use -= bytes;
+		BTRFS_I(inode)->reserved_bytes -= bytes;
+	}
+
+	spin_unlock(&data_sinfo->lock);
+}
+
+/* called when we are clearing an delalloc extent from the inode's io_tree */
+void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode,
+			      u64 bytes)
+{
+	struct btrfs_space_info *info;
+
+	info = BTRFS_I(inode)->space_info;
+
+	spin_lock(&info->lock);
+	info->bytes_delalloc -= bytes;
+	spin_unlock(&info->lock);
+}
+
 static int do_chunk_alloc(struct btrfs_trans_handle *trans,
 			  struct btrfs_root *extent_root, u64 alloc_bytes,
 			  u64 flags, int force)
@@ -3105,6 +3337,10 @@
 	       (unsigned long long)(info->total_bytes - info->bytes_used -
 				    info->bytes_pinned - info->bytes_reserved),
 	       (info->full) ? "" : "not ");
+	printk(KERN_INFO "space_info total=%llu, pinned=%llu, delalloc=%llu,"
+	       " may_use=%llu, used=%llu\n", info->total_bytes,
+	       info->bytes_pinned, info->bytes_delalloc, info->bytes_may_use,
+	       info->bytes_used);
 
 	down_read(&info->groups_sem);
 	list_for_each_entry(cache, &info->block_groups, list) {
@@ -3131,24 +3367,10 @@
 {
 	int ret;
 	u64 search_start = 0;
-	u64 alloc_profile;
 	struct btrfs_fs_info *info = root->fs_info;
 
-	if (data) {
-		alloc_profile = info->avail_data_alloc_bits &
-			info->data_alloc_profile;
-		data = BTRFS_BLOCK_GROUP_DATA | alloc_profile;
-	} else if (root == root->fs_info->chunk_root) {
-		alloc_profile = info->avail_system_alloc_bits &
-			info->system_alloc_profile;
-		data = BTRFS_BLOCK_GROUP_SYSTEM | alloc_profile;
-	} else {
-		alloc_profile = info->avail_metadata_alloc_bits &
-			info->metadata_alloc_profile;
-		data = BTRFS_BLOCK_GROUP_METADATA | alloc_profile;
-	}
+	data = btrfs_get_alloc_profile(root, data);
 again:
-	data = btrfs_reduce_alloc_profile(root, data);
 	/*
 	 * the only place that sets empty_size is btrfs_realloc_node, which
 	 * is not called recursively on allocations
@@ -4196,13 +4418,13 @@
 	path = btrfs_alloc_path();
 	BUG_ON(!path);
 
-	BUG_ON(!btrfs_tree_locked(parent));
+	btrfs_assert_tree_locked(parent);
 	parent_level = btrfs_header_level(parent);
 	extent_buffer_get(parent);
 	path->nodes[parent_level] = parent;
 	path->slots[parent_level] = btrfs_header_nritems(parent);
 
-	BUG_ON(!btrfs_tree_locked(node));
+	btrfs_assert_tree_locked(node);
 	level = btrfs_header_level(node);
 	extent_buffer_get(node);
 	path->nodes[level] = node;
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 872f104..dc78954 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1091,19 +1091,24 @@
 		WARN_ON(num_pages > nrptrs);
 		memset(pages, 0, sizeof(struct page *) * nrptrs);
 
-		ret = btrfs_check_free_space(root, write_bytes, 0);
+		ret = btrfs_check_data_free_space(root, inode, write_bytes);
 		if (ret)
 			goto out;
 
 		ret = prepare_pages(root, file, pages, num_pages,
 				    pos, first_index, last_index,
 				    write_bytes);
-		if (ret)
+		if (ret) {
+			btrfs_free_reserved_data_space(root, inode,
+						       write_bytes);
 			goto out;
+		}
 
 		ret = btrfs_copy_from_user(pos, num_pages,
 					   write_bytes, pages, buf);
 		if (ret) {
+			btrfs_free_reserved_data_space(root, inode,
+						       write_bytes);
 			btrfs_drop_pages(pages, num_pages);
 			goto out;
 		}
@@ -1111,8 +1116,11 @@
 		ret = dirty_and_release_pages(NULL, root, file, pages,
 					      num_pages, pos, write_bytes);
 		btrfs_drop_pages(pages, num_pages);
-		if (ret)
+		if (ret) {
+			btrfs_free_reserved_data_space(root, inode,
+						       write_bytes);
 			goto out;
+		}
 
 		if (will_write) {
 			btrfs_fdatawrite_range(inode->i_mapping, pos,
@@ -1136,6 +1144,8 @@
 	}
 out:
 	mutex_unlock(&inode->i_mutex);
+	if (ret)
+		err = ret;
 
 out_nolock:
 	kfree(pages);
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 3cee77a..7d4f948 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -102,34 +102,6 @@
 }
 
 /*
- * a very lame attempt at stopping writes when the FS is 85% full.  There
- * are countless ways this is incorrect, but it is better than nothing.
- */
-int btrfs_check_free_space(struct btrfs_root *root, u64 num_required,
-			   int for_del)
-{
-	u64 total;
-	u64 used;
-	u64 thresh;
-	int ret = 0;
-
-	spin_lock(&root->fs_info->delalloc_lock);
-	total = btrfs_super_total_bytes(&root->fs_info->super_copy);
-	used = btrfs_super_bytes_used(&root->fs_info->super_copy);
-	if (for_del)
-		thresh = total * 90;
-	else
-		thresh = total * 85;
-
-	do_div(thresh, 100);
-
-	if (used + root->fs_info->delalloc_bytes + num_required > thresh)
-		ret = -ENOSPC;
-	spin_unlock(&root->fs_info->delalloc_lock);
-	return ret;
-}
-
-/*
  * this does all the hard work for inserting an inline extent into
  * the btree.  The caller should have done a btrfs_drop_extents so that
  * no overlapping inline items exist in the btree
@@ -1190,6 +1162,7 @@
 	 */
 	if (!(old & EXTENT_DELALLOC) && (bits & EXTENT_DELALLOC)) {
 		struct btrfs_root *root = BTRFS_I(inode)->root;
+		btrfs_delalloc_reserve_space(root, inode, end - start + 1);
 		spin_lock(&root->fs_info->delalloc_lock);
 		BTRFS_I(inode)->delalloc_bytes += end - start + 1;
 		root->fs_info->delalloc_bytes += end - start + 1;
@@ -1223,9 +1196,12 @@
 			       (unsigned long long)end - start + 1,
 			       (unsigned long long)
 			       root->fs_info->delalloc_bytes);
+			btrfs_delalloc_free_space(root, inode, (u64)-1);
 			root->fs_info->delalloc_bytes = 0;
 			BTRFS_I(inode)->delalloc_bytes = 0;
 		} else {
+			btrfs_delalloc_free_space(root, inode,
+						  end - start + 1);
 			root->fs_info->delalloc_bytes -= end - start + 1;
 			BTRFS_I(inode)->delalloc_bytes -= end - start + 1;
 		}
@@ -2245,10 +2221,6 @@
 
 	root = BTRFS_I(dir)->root;
 
-	ret = btrfs_check_free_space(root, 1, 1);
-	if (ret)
-		goto fail;
-
 	trans = btrfs_start_transaction(root, 1);
 
 	btrfs_set_trans_block_group(trans, dir);
@@ -2261,7 +2233,6 @@
 	nr = trans->blocks_used;
 
 	btrfs_end_transaction_throttle(trans, root);
-fail:
 	btrfs_btree_balance_dirty(root, nr);
 	return ret;
 }
@@ -2284,10 +2255,6 @@
 		return -ENOTEMPTY;
 	}
 
-	ret = btrfs_check_free_space(root, 1, 1);
-	if (ret)
-		goto fail;
-
 	trans = btrfs_start_transaction(root, 1);
 	btrfs_set_trans_block_group(trans, dir);
 
@@ -2304,7 +2271,6 @@
 fail_trans:
 	nr = trans->blocks_used;
 	ret = btrfs_end_transaction_throttle(trans, root);
-fail:
 	btrfs_btree_balance_dirty(root, nr);
 
 	if (ret && !err)
@@ -2818,7 +2784,7 @@
 	if (size <= hole_start)
 		return 0;
 
-	err = btrfs_check_free_space(root, 1, 0);
+	err = btrfs_check_metadata_free_space(root);
 	if (err)
 		return err;
 
@@ -3014,6 +2980,7 @@
 	bi->last_trans = 0;
 	bi->logged_trans = 0;
 	bi->delalloc_bytes = 0;
+	bi->reserved_bytes = 0;
 	bi->disk_i_size = 0;
 	bi->flags = 0;
 	bi->index_cnt = (u64)-1;
@@ -3035,6 +3002,7 @@
 	inode->i_ino = args->ino;
 	init_btrfs_i(inode);
 	BTRFS_I(inode)->root = args->root;
+	btrfs_set_inode_space_info(args->root, inode);
 	return 0;
 }
 
@@ -3455,6 +3423,7 @@
 	BTRFS_I(inode)->index_cnt = 2;
 	BTRFS_I(inode)->root = root;
 	BTRFS_I(inode)->generation = trans->transid;
+	btrfs_set_inode_space_info(root, inode);
 
 	if (mode & S_IFDIR)
 		owner = 0;
@@ -3602,7 +3571,7 @@
 	if (!new_valid_dev(rdev))
 		return -EINVAL;
 
-	err = btrfs_check_free_space(root, 1, 0);
+	err = btrfs_check_metadata_free_space(root);
 	if (err)
 		goto fail;
 
@@ -3665,7 +3634,7 @@
 	u64 objectid;
 	u64 index = 0;
 
-	err = btrfs_check_free_space(root, 1, 0);
+	err = btrfs_check_metadata_free_space(root);
 	if (err)
 		goto fail;
 	trans = btrfs_start_transaction(root, 1);
@@ -3733,7 +3702,7 @@
 		return -ENOENT;
 
 	btrfs_inc_nlink(inode);
-	err = btrfs_check_free_space(root, 1, 0);
+	err = btrfs_check_metadata_free_space(root);
 	if (err)
 		goto fail;
 	err = btrfs_set_inode_index(dir, &index);
@@ -3779,7 +3748,7 @@
 	u64 index = 0;
 	unsigned long nr = 1;
 
-	err = btrfs_check_free_space(root, 1, 0);
+	err = btrfs_check_metadata_free_space(root);
 	if (err)
 		goto out_unlock;
 
@@ -4336,7 +4305,7 @@
 	u64 page_start;
 	u64 page_end;
 
-	ret = btrfs_check_free_space(root, PAGE_CACHE_SIZE, 0);
+	ret = btrfs_check_data_free_space(root, inode, PAGE_CACHE_SIZE);
 	if (ret)
 		goto out;
 
@@ -4349,6 +4318,7 @@
 
 	if ((page->mapping != inode->i_mapping) ||
 	    (page_start >= size)) {
+		btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE);
 		/* page got truncated out from underneath us */
 		goto out_unlock;
 	}
@@ -4631,7 +4601,7 @@
 	if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
 		return -EXDEV;
 
-	ret = btrfs_check_free_space(root, 1, 0);
+	ret = btrfs_check_metadata_free_space(root);
 	if (ret)
 		goto out_unlock;
 
@@ -4749,7 +4719,7 @@
 	if (name_len > BTRFS_MAX_INLINE_DATA_SIZE(root))
 		return -ENAMETOOLONG;
 
-	err = btrfs_check_free_space(root, 1, 0);
+	err = btrfs_check_metadata_free_space(root);
 	if (err)
 		goto out_fail;
 
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 988fdc8..bca729f 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -70,7 +70,7 @@
 	u64 index = 0;
 	unsigned long nr = 1;
 
-	ret = btrfs_check_free_space(root, 1, 0);
+	ret = btrfs_check_metadata_free_space(root);
 	if (ret)
 		goto fail_commit;
 
@@ -203,7 +203,7 @@
 	if (!root->ref_cows)
 		return -EINVAL;
 
-	ret = btrfs_check_free_space(root, 1, 0);
+	ret = btrfs_check_metadata_free_space(root);
 	if (ret)
 		goto fail_unlock;
 
@@ -374,7 +374,7 @@
 	unsigned long i;
 	int ret;
 
-	ret = btrfs_check_free_space(root, inode->i_size, 0);
+	ret = btrfs_check_data_free_space(root, inode, inode->i_size);
 	if (ret)
 		return -ENOSPC;
 
diff --git a/fs/btrfs/locking.c b/fs/btrfs/locking.c
index 85506c4..47b0a88 100644
--- a/fs/btrfs/locking.c
+++ b/fs/btrfs/locking.c
@@ -220,8 +220,8 @@
 	return 0;
 }
 
-int btrfs_tree_locked(struct extent_buffer *eb)
+void btrfs_assert_tree_locked(struct extent_buffer *eb)
 {
-	return test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags) ||
-			spin_is_locked(&eb->lock);
+	if (!test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags))
+		assert_spin_locked(&eb->lock);
 }
diff --git a/fs/btrfs/locking.h b/fs/btrfs/locking.h
index 6bb0afb..6c4ce45 100644
--- a/fs/btrfs/locking.h
+++ b/fs/btrfs/locking.h
@@ -21,11 +21,11 @@
 
 int btrfs_tree_lock(struct extent_buffer *eb);
 int btrfs_tree_unlock(struct extent_buffer *eb);
-int btrfs_tree_locked(struct extent_buffer *eb);
 
 int btrfs_try_tree_lock(struct extent_buffer *eb);
 int btrfs_try_spin_lock(struct extent_buffer *eb);
 
 void btrfs_set_lock_blocking(struct extent_buffer *eb);
 void btrfs_clear_lock_blocking(struct extent_buffer *eb);
+void btrfs_assert_tree_locked(struct extent_buffer *eb);
 #endif
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 39bd4d3..45e59d3 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -1913,6 +1913,9 @@
 /* 0x00 */
 COMPATIBLE_IOCTL(FIBMAP)
 COMPATIBLE_IOCTL(FIGETBSZ)
+/* 'X' - originally XFS but some now in the VFS */
+COMPATIBLE_IOCTL(FIFREEZE)
+COMPATIBLE_IOCTL(FITHAW)
 /* RAID */
 COMPATIBLE_IOCTL(RAID_VERSION)
 COMPATIBLE_IOCTL(GET_ARRAY_INFO)
diff --git a/fs/dcache.c b/fs/dcache.c
index 937df0f..07e2d4a 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1180,7 +1180,7 @@
 	iput(inode);
 	return res;
 }
-EXPORT_SYMBOL_GPL(d_obtain_alias);
+EXPORT_SYMBOL(d_obtain_alias);
 
 /**
  * d_splice_alias - splice a disconnected dentry into the tree if one exists
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 5f3231b..bff4052 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -198,9 +198,6 @@
 
 	fsi->ptmx_dentry = dentry;
 	rc = 0;
-
-	printk(KERN_DEBUG "Created ptmx node in devpts ino %lu\n",
-			inode->i_ino);
 out:
 	mutex_unlock(&root->d_inode->i_mutex);
 	return rc;
@@ -369,8 +366,6 @@
 	struct pts_fs_info *fsi;
 	struct pts_mount_opts *opts;
 
-	printk(KERN_NOTICE "devpts: newinstance mount\n");
-
 	err = get_sb_nodev(fs_type, flags, data, devpts_fill_super, mnt);
 	if (err)
 		return err;
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index 9a50b80..de9459b 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -609,7 +609,9 @@
  */
 int ext4_should_retry_alloc(struct super_block *sb, int *retries)
 {
-	if (!ext4_has_free_blocks(EXT4_SB(sb), 1) || (*retries)++ > 3)
+	if (!ext4_has_free_blocks(EXT4_SB(sb), 1) ||
+	    (*retries)++ > 3 ||
+	    !EXT4_SB(sb)->s_journal)
 		return 0;
 
 	jbd_debug(1, "%s: retrying operation after ENOSPC\n", sb->s_id);
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index f18a919..627f8c3 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -188,7 +188,7 @@
 	struct ext4_group_desc *gdp;
 	struct ext4_super_block *es;
 	struct ext4_sb_info *sbi;
-	int fatal = 0, err, count;
+	int fatal = 0, err, count, cleared;
 	ext4_group_t flex_group;
 
 	if (atomic_read(&inode->i_count) > 1) {
@@ -248,8 +248,10 @@
 		goto error_return;
 
 	/* Ok, now we can actually update the inode bitmaps.. */
-	if (!ext4_clear_bit_atomic(sb_bgl_lock(sbi, block_group),
-					bit, bitmap_bh->b_data))
+	spin_lock(sb_bgl_lock(sbi, block_group));
+	cleared = ext4_clear_bit(bit, bitmap_bh->b_data);
+	spin_unlock(sb_bgl_lock(sbi, block_group));
+	if (!cleared)
 		ext4_error(sb, "ext4_free_inode",
 			   "bit already cleared for inode %lu", ino);
 	else {
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 51cdd13..c7fed5b 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2544,7 +2544,7 @@
 
 		ext4_journal_stop(handle);
 
-		if (mpd.retval == -ENOSPC) {
+		if ((mpd.retval == -ENOSPC) && sbi->s_journal) {
 			/* commit the transaction which would
 			 * free blocks released in the transaction
 			 * and try again
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index a5732c5..39d1993 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3091,7 +3091,6 @@
 
 		/* Journal blocked and flushed, clear needs_recovery flag. */
 		EXT4_CLEAR_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
-		ext4_commit_super(sb, EXT4_SB(sb)->s_es, 1);
 		error = ext4_commit_super(sb, EXT4_SB(sb)->s_es, 1);
 		if (error)
 			goto out;
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 6b74d09..de0004f 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -202,9 +202,9 @@
 	sector_t blocknr;
 
 	/* fat_get_cluster() assumes the requested blocknr isn't truncated. */
-	mutex_lock(&mapping->host->i_mutex);
+	down_read(&mapping->host->i_alloc_sem);
 	blocknr = generic_block_bmap(mapping, block, fat_get_block);
-	mutex_unlock(&mapping->host->i_mutex);
+	up_read(&mapping->host->i_alloc_sem);
 
 	return blocknr;
 }
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index e5eaa62..e3fe991 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -274,6 +274,7 @@
 	int ret;
 
 	BUG_ON(inode->i_state & I_SYNC);
+	WARN_ON(inode->i_state & I_NEW);
 
 	/* Set I_SYNC, reset I_DIRTY */
 	dirty = inode->i_state & I_DIRTY;
@@ -298,6 +299,7 @@
 	}
 
 	spin_lock(&inode_lock);
+	WARN_ON(inode->i_state & I_NEW);
 	inode->i_state &= ~I_SYNC;
 	if (!(inode->i_state & I_FREEING)) {
 		if (!(inode->i_state & I_DIRTY) &&
@@ -470,6 +472,11 @@
 			break;
 		}
 
+		if (inode->i_state & I_NEW) {
+			requeue_io(inode);
+			continue;
+		}
+
 		if (wbc->nonblocking && bdi_write_congested(bdi)) {
 			wbc->encountered_congestion = 1;
 			if (!sb_is_blkdev_sb(sb))
@@ -531,7 +538,7 @@
 		list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
 			struct address_space *mapping;
 
-			if (inode->i_state & (I_FREEING|I_WILL_FREE))
+			if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW))
 				continue;
 			mapping = inode->i_mapping;
 			if (mapping->nrpages == 0)
diff --git a/fs/inode.c b/fs/inode.c
index 913ab2d..826fb0b 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -359,6 +359,7 @@
 		invalidate_inode_buffers(inode);
 		if (!atomic_read(&inode->i_count)) {
 			list_move(&inode->i_list, dispose);
+			WARN_ON(inode->i_state & I_NEW);
 			inode->i_state |= I_FREEING;
 			count++;
 			continue;
@@ -460,6 +461,7 @@
 				continue;
 		}
 		list_move(&inode->i_list, &freeable);
+		WARN_ON(inode->i_state & I_NEW);
 		inode->i_state |= I_FREEING;
 		nr_pruned++;
 	}
@@ -656,6 +658,7 @@
 	 * just created it (so there can be no old holders
 	 * that haven't tested I_LOCK).
 	 */
+	WARN_ON((inode->i_state & (I_LOCK|I_NEW)) != (I_LOCK|I_NEW));
 	inode->i_state &= ~(I_LOCK|I_NEW);
 	wake_up_inode(inode);
 }
@@ -1145,6 +1148,7 @@
 
 	list_del_init(&inode->i_list);
 	list_del_init(&inode->i_sb_list);
+	WARN_ON(inode->i_state & I_NEW);
 	inode->i_state |= I_FREEING;
 	inodes_stat.nr_inodes--;
 	spin_unlock(&inode_lock);
@@ -1186,16 +1190,19 @@
 			spin_unlock(&inode_lock);
 			return;
 		}
+		WARN_ON(inode->i_state & I_NEW);
 		inode->i_state |= I_WILL_FREE;
 		spin_unlock(&inode_lock);
 		write_inode_now(inode, 1);
 		spin_lock(&inode_lock);
+		WARN_ON(inode->i_state & I_NEW);
 		inode->i_state &= ~I_WILL_FREE;
 		inodes_stat.nr_unused--;
 		hlist_del_init(&inode->i_hash);
 	}
 	list_del_init(&inode->i_list);
 	list_del_init(&inode->i_sb_list);
+	WARN_ON(inode->i_state & I_NEW);
 	inode->i_state |= I_FREEING;
 	inodes_stat.nr_inodes--;
 	spin_unlock(&inode_lock);
diff --git a/fs/jffs2/background.c b/fs/jffs2/background.c
index 3cceef4..e958010 100644
--- a/fs/jffs2/background.c
+++ b/fs/jffs2/background.c
@@ -95,13 +95,17 @@
 			spin_unlock(&c->erase_completion_lock);
 			
 
-		/* This thread is purely an optimisation. But if it runs when
-		   other things could be running, it actually makes things a
-		   lot worse. Use yield() and put it at the back of the runqueue
-		   every time. Especially during boot, pulling an inode in
-		   with read_inode() is much preferable to having the GC thread
-		   get there first. */
-		yield();
+		/* Problem - immediately after bootup, the GCD spends a lot
+		 * of time in places like jffs2_kill_fragtree(); so much so
+		 * that userspace processes (like gdm and X) are starved
+		 * despite plenty of cond_resched()s and renicing.  Yield()
+		 * doesn't help, either (presumably because userspace and GCD
+		 * are generally competing for a higher latency resource -
+		 * disk).
+		 * This forces the GCD to slow the hell down.   Pulling an
+		 * inode in with read_inode() is much preferable to having
+		 * the GC thread get there first. */
+		schedule_timeout_interruptible(msecs_to_jiffies(50));
 
 		/* Put_super will send a SIGKILL and then wait on the sem.
 		 */
diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c
index 6ca08ad..1fc1e92 100644
--- a/fs/jffs2/readinode.c
+++ b/fs/jffs2/readinode.c
@@ -220,7 +220,7 @@
 				struct jffs2_tmp_dnode_info *tn)
 {
 	uint32_t fn_end = tn->fn->ofs + tn->fn->size;
-	struct jffs2_tmp_dnode_info *this;
+	struct jffs2_tmp_dnode_info *this, *ptn;
 
 	dbg_readinode("insert fragment %#04x-%#04x, ver %u at %08x\n", tn->fn->ofs, fn_end, tn->version, ref_offset(tn->fn->raw));
 
@@ -251,11 +251,18 @@
 	if (this) {
 		/* If the node is coincident with another at a lower address,
 		   back up until the other node is found. It may be relevant */
-		while (this->overlapped)
-			this = tn_prev(this);
-
-		/* First node should never be marked overlapped */
-		BUG_ON(!this);
+		while (this->overlapped) {
+			ptn = tn_prev(this);
+			if (!ptn) {
+				/*
+				 * We killed a node which set the overlapped
+				 * flags during the scan. Fix it up.
+				 */
+				this->overlapped = 0;
+				break;
+			}
+			this = ptn;
+		}
 		dbg_readinode("'this' found %#04x-%#04x (%s)\n", this->fn->ofs, this->fn->ofs + this->fn->size, this->fn ? "data" : "hole");
 	}
 
@@ -360,7 +367,17 @@
 			}
 			if (!this->overlapped)
 				break;
-			this = tn_prev(this);
+
+			ptn = tn_prev(this);
+			if (!ptn) {
+				/*
+				 * We killed a node which set the overlapped
+				 * flags during the scan. Fix it up.
+				 */
+				this->overlapped = 0;
+				break;
+			}
+			this = ptn;
 		}
 	}
 
@@ -456,8 +473,15 @@
 		eat_last(&rii->tn_root, &last->rb);
 		ver_insert(&ver_root, last);
 
-		if (unlikely(last->overlapped))
-			continue;
+		if (unlikely(last->overlapped)) {
+			if (pen)
+				continue;
+			/*
+			 * We killed a node which set the overlapped
+			 * flags during the scan. Fix it up.
+			 */
+			last->overlapped = 0;
+		}
 
 		/* Now we have a bunch of nodes in reverse version
 		   order, in the tree at ver_root. Most of the time,
diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
index 60fe74035..3a9e5de 100644
--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -4796,6 +4796,29 @@
 	return ret;
 }
 
+static int ocfs2_replace_extent_rec(struct inode *inode,
+				    handle_t *handle,
+				    struct ocfs2_path *path,
+				    struct ocfs2_extent_list *el,
+				    int split_index,
+				    struct ocfs2_extent_rec *split_rec)
+{
+	int ret;
+
+	ret = ocfs2_path_bh_journal_access(handle, inode, path,
+					   path_num_items(path) - 1);
+	if (ret) {
+		mlog_errno(ret);
+		goto out;
+	}
+
+	el->l_recs[split_index] = *split_rec;
+
+	ocfs2_journal_dirty(handle, path_leaf_bh(path));
+out:
+	return ret;
+}
+
 /*
  * Mark part or all of the extent record at split_index in the leaf
  * pointed to by path as written. This removes the unwritten
@@ -4885,7 +4908,9 @@
 
 	if (ctxt.c_contig_type == CONTIG_NONE) {
 		if (ctxt.c_split_covers_rec)
-			el->l_recs[split_index] = *split_rec;
+			ret = ocfs2_replace_extent_rec(inode, handle,
+						       path, el,
+						       split_index, split_rec);
 		else
 			ret = ocfs2_split_and_insert(inode, handle, path, et,
 						     &last_eb_bh, split_index,
diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c
index 54e182a..0a28139 100644
--- a/fs/ocfs2/dlm/dlmmaster.c
+++ b/fs/ocfs2/dlm/dlmmaster.c
@@ -1849,12 +1849,12 @@
 		if (!mle) {
 			if (res->owner != DLM_LOCK_RES_OWNER_UNKNOWN &&
 			    res->owner != assert->node_idx) {
-				mlog(ML_ERROR, "assert_master from "
-					  "%u, but current owner is "
-					  "%u! (%.*s)\n",
-				       assert->node_idx, res->owner,
-				       namelen, name);
-				goto kill;
+				mlog(ML_ERROR, "DIE! Mastery assert from %u, "
+				     "but current owner is %u! (%.*s)\n",
+				     assert->node_idx, res->owner, namelen,
+				     name);
+				__dlm_print_one_lock_resource(res);
+				BUG();
 			}
 		} else if (mle->type != DLM_MLE_MIGRATION) {
 			if (res->owner != DLM_LOCK_RES_OWNER_UNKNOWN) {
diff --git a/fs/ocfs2/dlm/dlmthread.c b/fs/ocfs2/dlm/dlmthread.c
index d129520..4060bb3 100644
--- a/fs/ocfs2/dlm/dlmthread.c
+++ b/fs/ocfs2/dlm/dlmthread.c
@@ -181,8 +181,7 @@
 
 		spin_lock(&res->spinlock);
 		/* This ensures that clear refmap is sent after the set */
-		__dlm_wait_on_lockres_flags(res, (DLM_LOCK_RES_SETREF_INPROG |
-						  DLM_LOCK_RES_MIGRATING));
+		__dlm_wait_on_lockres_flags(res, DLM_LOCK_RES_SETREF_INPROG);
 		spin_unlock(&res->spinlock);
 
 		/* clear our bit from the master's refmap, ignore errors */
diff --git a/fs/ocfs2/dlm/dlmunlock.c b/fs/ocfs2/dlm/dlmunlock.c
index 86ca085..fcf879e 100644
--- a/fs/ocfs2/dlm/dlmunlock.c
+++ b/fs/ocfs2/dlm/dlmunlock.c
@@ -117,11 +117,11 @@
 	else
 		BUG_ON(res->owner == dlm->node_num);
 
-	spin_lock(&dlm->spinlock);
+	spin_lock(&dlm->ast_lock);
 	/* We want to be sure that we're not freeing a lock
 	 * that still has AST's pending... */
 	in_use = !list_empty(&lock->ast_list);
-	spin_unlock(&dlm->spinlock);
+	spin_unlock(&dlm->ast_lock);
 	if (in_use) {
 	       mlog(ML_ERROR, "lockres %.*s: Someone is calling dlmunlock "
 		    "while waiting for an ast!", res->lockname.len,
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index 206a237..7219a86 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -320,9 +320,14 @@
 					struct ocfs2_lock_res *lockres);
 static inline void ocfs2_recover_from_dlm_error(struct ocfs2_lock_res *lockres,
 						int convert);
-#define ocfs2_log_dlm_error(_func, _err, _lockres) do {			\
-	mlog(ML_ERROR, "DLM error %d while calling %s on resource %s\n", \
-	     _err, _func, _lockres->l_name);				\
+#define ocfs2_log_dlm_error(_func, _err, _lockres) do {					\
+	if ((_lockres)->l_type != OCFS2_LOCK_TYPE_DENTRY)				\
+		mlog(ML_ERROR, "DLM error %d while calling %s on resource %s\n",	\
+		     _err, _func, _lockres->l_name);					\
+	else										\
+		mlog(ML_ERROR, "DLM error %d while calling %s on resource %.*s%08x\n",	\
+		     _err, _func, OCFS2_DENTRY_LOCK_INO_START - 1, (_lockres)->l_name,	\
+		     (unsigned int)ocfs2_get_dentry_lock_ino(_lockres));		\
 } while (0)
 static int ocfs2_downconvert_thread(void *arg);
 static void ocfs2_downconvert_on_unlock(struct ocfs2_super *osb,
diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index 0773841..946d3c3 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -341,6 +341,9 @@
 	struct ocfs2_node_map		osb_recovering_orphan_dirs;
 	unsigned int			*osb_orphan_wipes;
 	wait_queue_head_t		osb_wipe_event;
+
+	/* used to protect metaecc calculation check of xattr. */
+	spinlock_t osb_xattr_lock;
 };
 
 #define OCFS2_SB(sb)	    ((struct ocfs2_super *)(sb)->s_fs_info)
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index b1cb38f..7ac83a8 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -1537,6 +1537,13 @@
 	unlock_buffer(*bh);
 	ll_rw_block(READ, 1, bh);
 	wait_on_buffer(*bh);
+	if (!buffer_uptodate(*bh)) {
+		mlog_errno(-EIO);
+		brelse(*bh);
+		*bh = NULL;
+		return -EIO;
+	}
+
 	return 0;
 }
 
@@ -1747,6 +1754,7 @@
 	INIT_LIST_HEAD(&osb->blocked_lock_list);
 	osb->blocked_lock_count = 0;
 	spin_lock_init(&osb->osb_lock);
+	spin_lock_init(&osb->osb_xattr_lock);
 	ocfs2_init_inode_steal_slot(osb);
 
 	atomic_set(&osb->alloc_stats.moves, 0);
diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index 915039f..4ddd788 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -82,13 +82,14 @@
 
 #define OCFS2_XATTR_ROOT_SIZE	(sizeof(struct ocfs2_xattr_def_value_root))
 #define OCFS2_XATTR_INLINE_SIZE	80
+#define OCFS2_XATTR_HEADER_GAP	4
 #define OCFS2_XATTR_FREE_IN_IBODY	(OCFS2_MIN_XATTR_INLINE_SIZE \
 					 - sizeof(struct ocfs2_xattr_header) \
-					 - sizeof(__u32))
+					 - OCFS2_XATTR_HEADER_GAP)
 #define OCFS2_XATTR_FREE_IN_BLOCK(ptr)	((ptr)->i_sb->s_blocksize \
 					 - sizeof(struct ocfs2_xattr_block) \
 					 - sizeof(struct ocfs2_xattr_header) \
-					 - sizeof(__u32))
+					 - OCFS2_XATTR_HEADER_GAP)
 
 static struct ocfs2_xattr_def_value_root def_xv = {
 	.xv.xr_list.l_count = cpu_to_le16(1),
@@ -274,10 +275,12 @@
 			       bucket->bu_blocks, bucket->bu_bhs, 0,
 			       NULL);
 	if (!rc) {
+		spin_lock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock);
 		rc = ocfs2_validate_meta_ecc_bhs(bucket->bu_inode->i_sb,
 						 bucket->bu_bhs,
 						 bucket->bu_blocks,
 						 &bucket_xh(bucket)->xh_check);
+		spin_unlock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock);
 		if (rc)
 			mlog_errno(rc);
 	}
@@ -310,9 +313,11 @@
 {
 	int i;
 
+	spin_lock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock);
 	ocfs2_compute_meta_ecc_bhs(bucket->bu_inode->i_sb,
 				   bucket->bu_bhs, bucket->bu_blocks,
 				   &bucket_xh(bucket)->xh_check);
+	spin_unlock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock);
 
 	for (i = 0; i < bucket->bu_blocks; i++)
 		ocfs2_journal_dirty(handle, bucket->bu_bhs[i]);
@@ -1507,7 +1512,7 @@
 		last += 1;
 	}
 
-	free = min_offs - ((void *)last - xs->base) - sizeof(__u32);
+	free = min_offs - ((void *)last - xs->base) - OCFS2_XATTR_HEADER_GAP;
 	if (free < 0)
 		return -EIO;
 
@@ -2190,7 +2195,7 @@
 		last += 1;
 	}
 
-	free = min_offs - ((void *)last - xs->base) - sizeof(__u32);
+	free = min_offs - ((void *)last - xs->base) - OCFS2_XATTR_HEADER_GAP;
 	if (free < 0)
 		return 0;
 
@@ -2592,8 +2597,9 @@
 
 	if (!ret) {
 		/* Update inode ctime. */
-		ret = ocfs2_journal_access(ctxt->handle, inode, xis->inode_bh,
-					   OCFS2_JOURNAL_ACCESS_WRITE);
+		ret = ocfs2_journal_access_di(ctxt->handle, inode,
+					      xis->inode_bh,
+					      OCFS2_JOURNAL_ACCESS_WRITE);
 		if (ret) {
 			mlog_errno(ret);
 			goto out;
@@ -5060,8 +5066,8 @@
 	xh_free_start = le16_to_cpu(xh->xh_free_start);
 	header_size = sizeof(struct ocfs2_xattr_header) +
 			count * sizeof(struct ocfs2_xattr_entry);
-	max_free = OCFS2_XATTR_BUCKET_SIZE -
-		le16_to_cpu(xh->xh_name_value_len) - header_size;
+	max_free = OCFS2_XATTR_BUCKET_SIZE - header_size -
+		le16_to_cpu(xh->xh_name_value_len) - OCFS2_XATTR_HEADER_GAP;
 
 	mlog_bug_on_msg(header_size > blocksize, "bucket %llu has header size "
 			"of %u which exceed block size\n",
@@ -5094,7 +5100,7 @@
 			need = 0;
 	}
 
-	free = xh_free_start - header_size;
+	free = xh_free_start - header_size - OCFS2_XATTR_HEADER_GAP;
 	/*
 	 * We need to make sure the new name/value pair
 	 * can exist in the same block.
@@ -5127,7 +5133,8 @@
 			}
 
 			xh_free_start = le16_to_cpu(xh->xh_free_start);
-			free = xh_free_start - header_size;
+			free = xh_free_start - header_size
+				- OCFS2_XATTR_HEADER_GAP;
 			if (xh_free_start % blocksize < need)
 				free -= xh_free_start % blocksize;
 
diff --git a/fs/pipe.c b/fs/pipe.c
index 3a48ba5..14f502b 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -699,12 +699,12 @@
 	int retval;
 
 	mutex_lock(&inode->i_mutex);
-
 	retval = fasync_helper(fd, filp, on, &pipe->fasync_readers);
-
-	if (retval >= 0)
+	if (retval >= 0) {
 		retval = fasync_helper(fd, filp, on, &pipe->fasync_writers);
-
+		if (retval < 0) /* this can happen only if on == T */
+			fasync_helper(-1, filp, 0, &pipe->fasync_readers);
+	}
 	mutex_unlock(&inode->i_mutex);
 
 	if (retval < 0)
diff --git a/fs/proc/page.c b/fs/proc/page.c
index 2d13451..e998383 100644
--- a/fs/proc/page.c
+++ b/fs/proc/page.c
@@ -80,7 +80,7 @@
 #define KPF_RECLAIM    9
 #define KPF_BUDDY     10
 
-#define kpf_copy_bit(flags, srcpos, dstpos) (((flags >> srcpos) & 1) << dstpos)
+#define kpf_copy_bit(flags, dstpos, srcpos) (((flags >> srcpos) & 1) << dstpos)
 
 static ssize_t kpageflags_read(struct file *file, char __user *buf,
 			     size_t count, loff_t *ppos)
diff --git a/fs/squashfs/block.c b/fs/squashfs/block.c
index c837dfc..2a79603 100644
--- a/fs/squashfs/block.c
+++ b/fs/squashfs/block.c
@@ -80,7 +80,7 @@
  * generated a larger block - this does occasionally happen with zlib).
  */
 int squashfs_read_data(struct super_block *sb, void **buffer, u64 index,
-			int length, u64 *next_index, int srclength)
+			int length, u64 *next_index, int srclength, int pages)
 {
 	struct squashfs_sb_info *msblk = sb->s_fs_info;
 	struct buffer_head **bh;
@@ -184,7 +184,7 @@
 				offset = 0;
 			}
 
-			if (msblk->stream.avail_out == 0) {
+			if (msblk->stream.avail_out == 0 && page < pages) {
 				msblk->stream.next_out = buffer[page++];
 				msblk->stream.avail_out = PAGE_CACHE_SIZE;
 			}
@@ -201,25 +201,20 @@
 				zlib_init = 1;
 			}
 
-			zlib_err = zlib_inflate(&msblk->stream, Z_NO_FLUSH);
+			zlib_err = zlib_inflate(&msblk->stream, Z_SYNC_FLUSH);
 
 			if (msblk->stream.avail_in == 0 && k < b)
 				put_bh(bh[k++]);
 		} while (zlib_err == Z_OK);
 
 		if (zlib_err != Z_STREAM_END) {
-			ERROR("zlib_inflate returned unexpected result"
-				" 0x%x, srclength %d, avail_in %d,"
-				" avail_out %d\n", zlib_err, srclength,
-				msblk->stream.avail_in,
-				msblk->stream.avail_out);
+			ERROR("zlib_inflate error, data probably corrupt\n");
 			goto release_mutex;
 		}
 
 		zlib_err = zlib_inflateEnd(&msblk->stream);
 		if (zlib_err != Z_OK) {
-			ERROR("zlib_inflateEnd returned unexpected result 0x%x,"
-				" srclength %d\n", zlib_err, srclength);
+			ERROR("zlib_inflate error, data probably corrupt\n");
 			goto release_mutex;
 		}
 		length = msblk->stream.total_out;
@@ -268,7 +263,8 @@
 		put_bh(bh[k]);
 
 read_failure:
-	ERROR("sb_bread failed reading block 0x%llx\n", cur_index);
+	ERROR("squashfs_read_data failed to read block 0x%llx\n",
+					(unsigned long long) index);
 	kfree(bh);
 	return -EIO;
 }
diff --git a/fs/squashfs/cache.c b/fs/squashfs/cache.c
index f29eda1..1c4739e 100644
--- a/fs/squashfs/cache.c
+++ b/fs/squashfs/cache.c
@@ -119,7 +119,7 @@
 
 			entry->length = squashfs_read_data(sb, entry->data,
 				block, length, &entry->next_index,
-				cache->block_size);
+				cache->block_size, cache->pages);
 
 			spin_lock(&cache->lock);
 
@@ -406,7 +406,7 @@
 	for (i = 0; i < pages; i++, buffer += PAGE_CACHE_SIZE)
 		data[i] = buffer;
 	res = squashfs_read_data(sb, data, block, length |
-		SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length);
+		SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length, pages);
 	kfree(data);
 	return res;
 }
diff --git a/fs/squashfs/inode.c b/fs/squashfs/inode.c
index 7a63398..9101dbd 100644
--- a/fs/squashfs/inode.c
+++ b/fs/squashfs/inode.c
@@ -133,7 +133,8 @@
 	type = le16_to_cpu(sqshb_ino->inode_type);
 	switch (type) {
 	case SQUASHFS_REG_TYPE: {
-		unsigned int frag_offset, frag_size, frag;
+		unsigned int frag_offset, frag;
+		int frag_size;
 		u64 frag_blk;
 		struct squashfs_reg_inode *sqsh_ino = &squashfs_ino.reg;
 
@@ -175,7 +176,8 @@
 		break;
 	}
 	case SQUASHFS_LREG_TYPE: {
-		unsigned int frag_offset, frag_size, frag;
+		unsigned int frag_offset, frag;
+		int frag_size;
 		u64 frag_blk;
 		struct squashfs_lreg_inode *sqsh_ino = &squashfs_ino.lreg;
 
diff --git a/fs/squashfs/squashfs.h b/fs/squashfs/squashfs.h
index 6b2515d..0e9feb6 100644
--- a/fs/squashfs/squashfs.h
+++ b/fs/squashfs/squashfs.h
@@ -34,7 +34,7 @@
 
 /* block.c */
 extern int squashfs_read_data(struct super_block *, void **, u64, int, u64 *,
-				int);
+				int, int);
 
 /* cache.c */
 extern struct squashfs_cache *squashfs_cache_init(char *, int, int);
diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index 071df5b..681ec0d 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -389,7 +389,7 @@
 		return err;
 	}
 
-	printk(KERN_INFO "squashfs: version 4.0 (2009/01/03) "
+	printk(KERN_INFO "squashfs: version 4.0 (2009/01/31) "
 		"Phillip Lougher\n");
 
 	return 0;
diff --git a/fs/super.c b/fs/super.c
index 8349ed6..6ce5014 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -371,8 +371,10 @@
 				continue;
 			if (!grab_super(old))
 				goto retry;
-			if (s)
+			if (s) {
+				up_write(&s->s_umount);
 				destroy_super(s);
+			}
 			return old;
 		}
 	}
@@ -387,6 +389,7 @@
 	err = set(s, data);
 	if (err) {
 		spin_unlock(&sb_lock);
+		up_write(&s->s_umount);
 		destroy_super(s);
 		return ERR_PTR(err);
 	}
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index cb329ed..aa1016b 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -34,6 +34,12 @@
 #include <linux/backing-dev.h>
 #include <linux/freezer.h>
 
+#include "xfs_sb.h"
+#include "xfs_inum.h"
+#include "xfs_ag.h"
+#include "xfs_dmapi.h"
+#include "xfs_mount.h"
+
 static kmem_zone_t *xfs_buf_zone;
 STATIC int xfsbufd(void *);
 STATIC int xfsbufd_wakeup(int, gfp_t);
@@ -1435,10 +1441,12 @@
 
 void
 xfs_free_buftarg(
-	xfs_buftarg_t		*btp)
+	struct xfs_mount	*mp,
+	struct xfs_buftarg	*btp)
 {
 	xfs_flush_buftarg(btp, 1);
-	xfs_blkdev_issue_flush(btp);
+	if (mp->m_flags & XFS_MOUNT_BARRIER)
+		xfs_blkdev_issue_flush(btp);
 	xfs_free_bufhash(btp);
 	iput(btp->bt_mapping->host);
 
diff --git a/fs/xfs/linux-2.6/xfs_buf.h b/fs/xfs/linux-2.6/xfs_buf.h
index 288ae7c..9b4d666 100644
--- a/fs/xfs/linux-2.6/xfs_buf.h
+++ b/fs/xfs/linux-2.6/xfs_buf.h
@@ -413,7 +413,7 @@
  *	Handling of buftargs.
  */
 extern xfs_buftarg_t *xfs_alloc_buftarg(struct block_device *, int);
-extern void xfs_free_buftarg(xfs_buftarg_t *);
+extern void xfs_free_buftarg(struct xfs_mount *, struct xfs_buftarg *);
 extern void xfs_wait_buftarg(xfs_buftarg_t *);
 extern int xfs_setsize_buftarg(xfs_buftarg_t *, unsigned int, unsigned int);
 extern int xfs_flush_buftarg(xfs_buftarg_t *, int);
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index c71e226..32ae502 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -734,15 +734,15 @@
 {
 	if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) {
 		struct block_device *logdev = mp->m_logdev_targp->bt_bdev;
-		xfs_free_buftarg(mp->m_logdev_targp);
+		xfs_free_buftarg(mp, mp->m_logdev_targp);
 		xfs_blkdev_put(logdev);
 	}
 	if (mp->m_rtdev_targp) {
 		struct block_device *rtdev = mp->m_rtdev_targp->bt_bdev;
-		xfs_free_buftarg(mp->m_rtdev_targp);
+		xfs_free_buftarg(mp, mp->m_rtdev_targp);
 		xfs_blkdev_put(rtdev);
 	}
-	xfs_free_buftarg(mp->m_ddev_targp);
+	xfs_free_buftarg(mp, mp->m_ddev_targp);
 }
 
 /*
@@ -811,9 +811,9 @@
 
  out_free_rtdev_targ:
 	if (mp->m_rtdev_targp)
-		xfs_free_buftarg(mp->m_rtdev_targp);
+		xfs_free_buftarg(mp, mp->m_rtdev_targp);
  out_free_ddev_targ:
-	xfs_free_buftarg(mp->m_ddev_targp);
+	xfs_free_buftarg(mp, mp->m_ddev_targp);
  out_close_rtdev:
 	if (rtdev)
 		xfs_blkdev_put(rtdev);
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index e2fb621..478e587 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -246,9 +246,6 @@
 		goto out_destroy;
 	}
 
-	if (lock_flags)
-		xfs_ilock(ip, lock_flags);
-
 	/*
 	 * Preload the radix tree so we can insert safely under the
 	 * write spinlock. Note that we cannot sleep inside the preload
@@ -256,7 +253,16 @@
 	 */
 	if (radix_tree_preload(GFP_KERNEL)) {
 		error = EAGAIN;
-		goto out_unlock;
+		goto out_destroy;
+	}
+
+	/*
+	 * Because the inode hasn't been added to the radix-tree yet it can't
+	 * be found by another thread, so we can do the non-sleeping lock here.
+	 */
+	if (lock_flags) {
+		if (!xfs_ilock_nowait(ip, lock_flags))
+			BUG();
 	}
 
 	mask = ~(((XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_inodelog)) - 1);
@@ -284,7 +290,6 @@
 out_preload_end:
 	write_unlock(&pag->pag_ici_lock);
 	radix_tree_preload_end();
-out_unlock:
 	if (lock_flags)
 		xfs_iunlock(ip, lock_flags);
 out_destroy:
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index b1047de..61af610 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -1455,10 +1455,19 @@
 	item = item->ri_prev;
 
 	if (item->ri_total == 0) {		/* first region to be added */
-		item->ri_total	= in_f->ilf_size;
-		ASSERT(item->ri_total <= XLOG_MAX_REGIONS_IN_ITEM);
-		item->ri_buf = kmem_zalloc((item->ri_total *
-					    sizeof(xfs_log_iovec_t)), KM_SLEEP);
+		if (in_f->ilf_size == 0 ||
+		    in_f->ilf_size > XLOG_MAX_REGIONS_IN_ITEM) {
+			xlog_warn(
+	"XFS: bad number of regions (%d) in inode log format",
+				  in_f->ilf_size);
+			ASSERT(0);
+			return XFS_ERROR(EIO);
+		}
+
+		item->ri_total = in_f->ilf_size;
+		item->ri_buf =
+			kmem_zalloc(item->ri_total * sizeof(xfs_log_iovec_t),
+				    KM_SLEEP);
 	}
 	ASSERT(item->ri_total > item->ri_cnt);
 	/* Description region is ri_buf[0] */
diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h
index 0b0d236..c7d4b2e 100644
--- a/include/drm/drm_crtc_helper.h
+++ b/include/drm/drm_crtc_helper.h
@@ -76,6 +76,7 @@
 	void (*mode_set)(struct drm_encoder *encoder,
 			 struct drm_display_mode *mode,
 			 struct drm_display_mode *adjusted_mode);
+	struct drm_crtc *(*get_crtc)(struct drm_encoder *encoder);
 	/* detect for DAC style encoders */
 	enum drm_connector_status (*detect)(struct drm_encoder *encoder,
 					    struct drm_connector *connector);
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index c707c15..a11cc9d 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -58,10 +58,10 @@
 	u8 hsync_pulse_width_lo;
 	u8 vsync_pulse_width_lo:4;
 	u8 vsync_offset_lo:4;
-	u8 hsync_pulse_width_hi:2;
-	u8 hsync_offset_hi:2;
 	u8 vsync_pulse_width_hi:2;
 	u8 vsync_offset_hi:2;
+	u8 hsync_pulse_width_hi:2;
+	u8 hsync_offset_hi:2;
 	u8 width_mm_lo;
 	u8 height_mm_lo;
 	u8 height_mm_hi:4;
@@ -69,8 +69,8 @@
 	u8 hborder;
 	u8 vborder;
 	u8 unknown0:1;
-	u8 vsync_positive:1;
 	u8 hsync_positive:1;
+	u8 vsync_positive:1;
 	u8 separate_sync:2;
 	u8 stereo:1;
 	u8 unknown6:1;
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index b97cdc5..106c3ba 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -52,6 +52,7 @@
 header-y += cgroupstats.h
 header-y += cramfs_fs.h
 header-y += cycx_cfm.h
+header-y += dcbnl.h
 header-y += dlmconstants.h
 header-y += dlm_device.h
 header-y += dlm_netlink.h
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 08a86d5..9a061ac 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -89,6 +89,8 @@
 	ATA_ID_DLF		= 128,
 	ATA_ID_CSFO		= 129,
 	ATA_ID_CFA_POWER	= 160,
+	ATA_ID_CFA_KEY_MGMT	= 162,
+	ATA_ID_CFA_MODES	= 163,
 	ATA_ID_ROT_SPEED	= 217,
 	ATA_ID_PIO4		= (1 << 1),
 
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index dcaa0fd..465d6ba 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -708,6 +708,8 @@
 };
 
 /* This should not be used directly - use rq_for_each_segment */
+#define for_each_bio(_bio)		\
+	for (; _bio; _bio = _bio->bi_next)
 #define __rq_for_each_bio(_bio, rq)	\
 	if ((rq->bio))			\
 		for (_bio = (rq)->bio; _bio; _bio = _bio->bi_next)
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 384b38d..1610427 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -234,7 +234,6 @@
 	int	(*suspend)	(struct cpufreq_policy *policy, pm_message_t pmsg);
 	int	(*resume)	(struct cpufreq_policy *policy);
 	struct freq_attr	**attr;
-	bool			hide_interface;
 };
 
 /* flags */
diff --git a/include/linux/dcbnl.h b/include/linux/dcbnl.h
index b0ef274..7d2e100 100644
--- a/include/linux/dcbnl.h
+++ b/include/linux/dcbnl.h
@@ -20,10 +20,12 @@
 #ifndef __LINUX_DCBNL_H__
 #define __LINUX_DCBNL_H__
 
+#include <linux/types.h>
+
 #define DCB_PROTO_VERSION 1
 
 struct dcbmsg {
-	unsigned char      dcb_family;
+	__u8               dcb_family;
 	__u8               cmd;
 	__u16              dcb_pad;
 };
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index f041384..1956c8d 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -97,7 +97,6 @@
 
 /**
  * struct dma_chan_percpu - the per-CPU part of struct dma_chan
- * @refcount: local_t used for open-coded "bigref" counting
  * @memcpy_count: transaction counter
  * @bytes_transferred: byte counter
  */
@@ -114,9 +113,6 @@
  * @cookie: last cookie value returned to client
  * @chan_id: channel ID for sysfs
  * @dev: class device for sysfs
- * @refcount: kref, used in "bigref" slow-mode
- * @slow_ref: indicates that the DMA channel is free
- * @rcu: the DMA channel's RCU head
  * @device_node: used to add this to the device chan list
  * @local: per-cpu pointer to a struct dma_chan_percpu
  * @client-count: how many clients are using this channel
@@ -213,8 +209,6 @@
  * @global_node: list_head for global dma_device_list
  * @cap_mask: one or more dma_capability flags
  * @max_xor: maximum number of xor sources, 0 if no capability
- * @refcount: reference count
- * @done: IO completion struct
  * @dev_id: unique device ID
  * @dev: struct device reference for dma mapping api
  * @device_alloc_chan_resources: allocate resources and return the
@@ -227,6 +221,7 @@
  * @device_prep_dma_interrupt: prepares an end of chain interrupt operation
  * @device_prep_slave_sg: prepares a slave dma operation
  * @device_terminate_all: terminate all pending operations
+ * @device_is_tx_complete: poll for transaction completion
  * @device_issue_pending: push pending transactions to hardware
  */
 struct dma_device {
diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h
index c37e924..ed21bd3 100644
--- a/include/linux/hdreg.h
+++ b/include/linux/hdreg.h
@@ -511,7 +511,6 @@
 	unsigned short	words69_70[2];	/* reserved words 69-70
 					 * future command overlap and queuing
 					 */
-	/* HDIO_GET_IDENTITY currently returns only words 0 through 70 */
 	unsigned short	words71_74[4];	/* reserved words 71-74
 					 * for IDENTIFY PACKET DEVICE command
 					 */
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 194da5a..e0cedfe 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -663,7 +663,7 @@
 #define to_ide_device(dev)		container_of(dev, ide_drive_t, gendev)
 
 #define to_ide_drv(obj, cont_type)	\
-	container_of(obj, struct cont_type, kref)
+	container_of(obj, struct cont_type, dev)
 
 #define ide_drv_g(disk, cont_type)	\
 	container_of((disk)->private_data, struct cont_type, driver)
@@ -866,6 +866,7 @@
 	unsigned int	n_ports;
 	struct device	*dev[2];
 	unsigned int	(*init_chipset)(struct pci_dev *);
+	irq_handler_t	irq_handler;
 	unsigned long	host_flags;
 	void		*host_priv;
 	ide_hwif_t	*cur_port;	/* for hosts requiring serialization */
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index e752d97..af1de95 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -147,6 +147,7 @@
 		.nr_cpus_allowed = NR_CPUS,				\
 	},								\
 	.tasks		= LIST_HEAD_INIT(tsk.tasks),			\
+	.pushable_tasks = PLIST_NODE_INIT(tsk.pushable_tasks, MAX_PRIO), \
 	.ptraced	= LIST_HEAD_INIT(tsk.ptraced),			\
 	.ptrace_entry	= LIST_HEAD_INIT(tsk.ptrace_entry),		\
 	.real_parent	= &tsk,						\
diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
index c4f6c10..d2e3cbf 100644
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -194,6 +194,7 @@
 /* FSTS_REG */
 #define DMA_FSTS_PPF ((u32)2)
 #define DMA_FSTS_PFO ((u32)1)
+#define DMA_FSTS_IQE (1 << 4)
 #define dma_fsts_fault_record_index(s) (((s) >> 8) & 0xff)
 
 /* FRCD_REG, 32 bits access */
@@ -328,7 +329,7 @@
 			  unsigned int size_order, u64 type,
 			  int non_present_entry_flush);
 
-extern void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu);
+extern int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu);
 
 extern void *intel_alloc_coherent(struct device *, size_t, dma_addr_t *, gfp_t);
 extern void intel_free_coherent(struct device *, size_t, void *, dma_addr_t);
diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h
index 82df317..0adb0f9 100644
--- a/include/linux/io-mapping.h
+++ b/include/linux/io-mapping.h
@@ -30,11 +30,14 @@
  * See Documentation/io_mapping.txt
  */
 
-/* this struct isn't actually defined anywhere */
-struct io_mapping;
-
 #ifdef CONFIG_HAVE_ATOMIC_IOMAP
 
+struct io_mapping {
+	resource_size_t base;
+	unsigned long size;
+	pgprot_t prot;
+};
+
 /*
  * For small address space machines, mapping large objects
  * into the kernel virtual space isn't practical. Where
@@ -43,23 +46,40 @@
  */
 
 static inline struct io_mapping *
-io_mapping_create_wc(unsigned long base, unsigned long size)
+io_mapping_create_wc(resource_size_t base, unsigned long size)
 {
-	return (struct io_mapping *) base;
+	struct io_mapping *iomap;
+
+	if (!is_io_mapping_possible(base, size))
+		return NULL;
+
+	iomap = kmalloc(sizeof(*iomap), GFP_KERNEL);
+	if (!iomap)
+		return NULL;
+
+	iomap->base = base;
+	iomap->size = size;
+	iomap->prot = pgprot_writecombine(__pgprot(__PAGE_KERNEL));
+	return iomap;
 }
 
 static inline void
 io_mapping_free(struct io_mapping *mapping)
 {
+	kfree(mapping);
 }
 
 /* Atomic map/unmap */
 static inline void *
 io_mapping_map_atomic_wc(struct io_mapping *mapping, unsigned long offset)
 {
-	offset += (unsigned long) mapping;
-	return iomap_atomic_prot_pfn(offset >> PAGE_SHIFT, KM_USER0,
-				     __pgprot(__PAGE_KERNEL_WC));
+	resource_size_t phys_addr;
+	unsigned long pfn;
+
+	BUG_ON(offset >= mapping->size);
+	phys_addr = mapping->base + offset;
+	pfn = (unsigned long) (phys_addr >> PAGE_SHIFT);
+	return iomap_atomic_prot_pfn(pfn, KM_USER0, mapping->prot);
 }
 
 static inline void
@@ -71,8 +91,12 @@
 static inline void *
 io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset)
 {
-	offset += (unsigned long) mapping;
-	return ioremap_wc(offset, PAGE_SIZE);
+	resource_size_t phys_addr;
+
+	BUG_ON(offset >= mapping->size);
+	phys_addr = mapping->base + offset;
+
+	return ioremap_wc(phys_addr, PAGE_SIZE);
 }
 
 static inline void
@@ -83,9 +107,12 @@
 
 #else
 
+/* this struct isn't actually defined anywhere */
+struct io_mapping;
+
 /* Create the io_mapping object*/
 static inline struct io_mapping *
-io_mapping_create_wc(unsigned long base, unsigned long size)
+io_mapping_create_wc(resource_size_t base, unsigned long size)
 {
 	return (struct io_mapping *) ioremap_wc(base, size);
 }
diff --git a/include/linux/latencytop.h b/include/linux/latencytop.h
index 901c2d6..b0e9989 100644
--- a/include/linux/latencytop.h
+++ b/include/linux/latencytop.h
@@ -9,6 +9,7 @@
 #ifndef _INCLUDE_GUARD_LATENCYTOP_H_
 #define _INCLUDE_GUARD_LATENCYTOP_H_
 
+#include <linux/compiler.h>
 #ifdef CONFIG_LATENCYTOP
 
 #define LT_SAVECOUNT		32
@@ -24,7 +25,14 @@
 
 struct task_struct;
 
-void account_scheduler_latency(struct task_struct *task, int usecs, int inter);
+extern int latencytop_enabled;
+void __account_scheduler_latency(struct task_struct *task, int usecs, int inter);
+static inline void
+account_scheduler_latency(struct task_struct *task, int usecs, int inter)
+{
+	if (unlikely(latencytop_enabled))
+		__account_scheduler_latency(task, usecs, inter);
+}
 
 void clear_all_latency_tracing(struct task_struct *p);
 
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 5d87bc0..dc18b87 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -275,7 +275,7 @@
 	 * advised to wait only for the following duration before
 	 * doing SRST.
 	 */
-	ATA_TMOUT_PMP_SRST_WAIT	= 1000,
+	ATA_TMOUT_PMP_SRST_WAIT	= 5000,
 
 	/* ATA bus states */
 	BUS_UNKNOWN		= 0,
@@ -530,6 +530,7 @@
 	unsigned long		flags;		/* ATA_QCFLAG_xxx */
 	unsigned int		tag;
 	unsigned int		n_elem;
+	unsigned int		orig_n_elem;
 
 	int			dma_dir;
 
@@ -750,7 +751,8 @@
 	acpi_handle		acpi_handle;
 	struct ata_acpi_gtm	__acpi_init_gtm; /* use ata_acpi_init_gtm() */
 #endif
-	u8			sector_buf[ATA_SECT_SIZE]; /* owned by EH */
+	/* owned by EH */
+	u8			sector_buf[ATA_SECT_SIZE] ____cacheline_aligned;
 };
 
 /* The following initializer overrides a method to NULL whether one of
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 92915e8..d84feb7 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -276,4 +276,7 @@
 #endif
 };
 
+/* Future-safe accessor for struct mm_struct's cpu_vm_mask. */
+#define mm_cpumask(mm) (&(mm)->cpu_vm_mask)
+
 #endif /* _LINUX_MM_TYPES_H */
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index ec54785..6593667 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1079,6 +1079,7 @@
 extern int 		register_netdevice_notifier(struct notifier_block *nb);
 extern int		unregister_netdevice_notifier(struct notifier_block *nb);
 extern int		init_dummy_netdev(struct net_device *dev);
+extern void		netdev_resync_ops(struct net_device *dev);
 
 extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev);
 extern struct net_device	*dev_get_by_index(struct net *net, int ifindex);
diff --git a/include/linux/netfilter/xt_NFLOG.h b/include/linux/netfilter/xt_NFLOG.h
index cdcd0ed..4b36aeb 100644
--- a/include/linux/netfilter/xt_NFLOG.h
+++ b/include/linux/netfilter/xt_NFLOG.h
@@ -2,7 +2,7 @@
 #define _XT_NFLOG_TARGET
 
 #define XT_NFLOG_DEFAULT_GROUP		0x1
-#define XT_NFLOG_DEFAULT_THRESHOLD	1
+#define XT_NFLOG_DEFAULT_THRESHOLD	0
 
 #define XT_NFLOG_MASK			0x0
 
diff --git a/include/linux/plist.h b/include/linux/plist.h
index 85de2f0..45926d7 100644
--- a/include/linux/plist.h
+++ b/include/linux/plist.h
@@ -96,6 +96,10 @@
 # define PLIST_HEAD_LOCK_INIT(_lock)
 #endif
 
+#define _PLIST_HEAD_INIT(head)				\
+	.prio_list = LIST_HEAD_INIT((head).prio_list),	\
+	.node_list = LIST_HEAD_INIT((head).node_list)
+
 /**
  * PLIST_HEAD_INIT - static struct plist_head initializer
  * @head:	struct plist_head variable name
@@ -103,8 +107,7 @@
  */
 #define PLIST_HEAD_INIT(head, _lock)			\
 {							\
-	.prio_list = LIST_HEAD_INIT((head).prio_list),	\
-	.node_list = LIST_HEAD_INIT((head).node_list),	\
+        _PLIST_HEAD_INIT(head),                         \
 	PLIST_HEAD_LOCK_INIT(&(_lock))			\
 }
 
@@ -116,7 +119,7 @@
 #define PLIST_NODE_INIT(node, __prio)			\
 {							\
 	.prio  = (__prio),				\
-	.plist = PLIST_HEAD_INIT((node).plist, NULL),	\
+	.plist = { _PLIST_HEAD_INIT((node).plist) }, 	\
 }
 
 /**
diff --git a/include/linux/rcuclassic.h b/include/linux/rcuclassic.h
index f3f697d..80044a4 100644
--- a/include/linux/rcuclassic.h
+++ b/include/linux/rcuclassic.h
@@ -181,4 +181,10 @@
 #define rcu_enter_nohz()	do { } while (0)
 #define rcu_exit_nohz()		do { } while (0)
 
+/* A context switch is a grace period for rcuclassic. */
+static inline int rcu_blocking_is_gp(void)
+{
+	return num_online_cpus() == 1;
+}
+
 #endif /* __LINUX_RCUCLASSIC_H */
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 921340a..528343e 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -52,6 +52,9 @@
 	void (*func)(struct rcu_head *head);
 };
 
+/* Internal to kernel, but needed by rcupreempt.h. */
+extern int rcu_scheduler_active;
+
 #if defined(CONFIG_CLASSIC_RCU)
 #include <linux/rcuclassic.h>
 #elif defined(CONFIG_TREE_RCU)
@@ -265,6 +268,7 @@
 
 /* Internal to kernel */
 extern void rcu_init(void);
+extern void rcu_scheduler_starting(void);
 extern int rcu_needs_cpu(int cpu);
 
 #endif /* __LINUX_RCUPDATE_H */
diff --git a/include/linux/rcupreempt.h b/include/linux/rcupreempt.h
index 3e05c09..74304b4 100644
--- a/include/linux/rcupreempt.h
+++ b/include/linux/rcupreempt.h
@@ -142,4 +142,19 @@
 #define rcu_exit_nohz()		do { } while (0)
 #endif /* CONFIG_NO_HZ */
 
+/*
+ * A context switch is a grace period for rcupreempt synchronize_rcu()
+ * only during early boot, before the scheduler has been initialized.
+ * So, how the heck do we get a context switch?  Well, if the caller
+ * invokes synchronize_rcu(), they are willing to accept a context
+ * switch, so we simply pretend that one happened.
+ *
+ * After boot, there might be a blocked or preempted task in an RCU
+ * read-side critical section, so we cannot then take the fastpath.
+ */
+static inline int rcu_blocking_is_gp(void)
+{
+	return num_online_cpus() == 1 && !rcu_scheduler_active;
+}
+
 #endif /* __LINUX_RCUPREEMPT_H */
diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
index d4368b7..a722fb6 100644
--- a/include/linux/rcutree.h
+++ b/include/linux/rcutree.h
@@ -326,4 +326,10 @@
 }
 #endif /* CONFIG_NO_HZ */
 
+/* A context switch is a grace period for rcutree. */
+static inline int rcu_blocking_is_gp(void)
+{
+	return num_online_cpus() == 1;
+}
+
 #endif /* __LINUX_RCUTREE_H */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index a063d19..d94ebc8 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -998,6 +998,7 @@
 			      struct rq *busiest, struct sched_domain *sd,
 			      enum cpu_idle_type idle);
 	void (*pre_schedule) (struct rq *this_rq, struct task_struct *task);
+	int (*needs_post_schedule) (struct rq *this_rq);
 	void (*post_schedule) (struct rq *this_rq);
 	void (*task_wake_up) (struct rq *this_rq, struct task_struct *task);
 
@@ -1052,6 +1053,10 @@
 	u64			last_wakeup;
 	u64			avg_overlap;
 
+	u64			start_runtime;
+	u64			avg_wakeup;
+	u64			nr_migrations;
+
 #ifdef CONFIG_SCHEDSTATS
 	u64			wait_start;
 	u64			wait_max;
@@ -1067,7 +1072,6 @@
 	u64			exec_max;
 	u64			slice_max;
 
-	u64			nr_migrations;
 	u64			nr_migrations_cold;
 	u64			nr_failed_migrations_affine;
 	u64			nr_failed_migrations_running;
@@ -1164,6 +1168,7 @@
 #endif
 
 	struct list_head tasks;
+	struct plist_node pushable_tasks;
 
 	struct mm_struct *mm, *active_mm;
 
@@ -1419,6 +1424,9 @@
 #endif
 };
 
+/* Future-safe accessor for struct task_struct's cpus_allowed. */
+#define tsk_cpumask(tsk) (&(tsk)->cpus_allowed)
+
 /*
  * Priority of a process goes from 0..MAX_PRIO-1, valid RT
  * priority is 0..MAX_RT_PRIO-1, and SCHED_NORMAL/SCHED_BATCH
@@ -2301,9 +2309,13 @@
 extern int sched_group_set_rt_period(struct task_group *tg,
 				      long rt_period_us);
 extern long sched_group_rt_period(struct task_group *tg);
+extern int sched_rt_can_attach(struct task_group *tg, struct task_struct *tsk);
 #endif
 #endif
 
+extern int task_can_switch_user(struct user_struct *up,
+					struct task_struct *tsk);
+
 #ifdef CONFIG_TASK_XACCT
 static inline void add_rchar(struct task_struct *tsk, ssize_t amt)
 {
diff --git a/include/linux/serio.h b/include/linux/serio.h
index 1bcb357..e0417e4 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -212,7 +212,7 @@
 #define SERIO_FUJITSU	0x35
 #define SERIO_ZHENHUA	0x36
 #define SERIO_INEXIO	0x37
-#define SERIO_TOUCHIT213	0x37
+#define SERIO_TOUCHIT213	0x38
 #define SERIO_W8001	0x39
 
 #endif
diff --git a/include/linux/user_namespace.h b/include/linux/user_namespace.h
index 315bcd3..cc4f453 100644
--- a/include/linux/user_namespace.h
+++ b/include/linux/user_namespace.h
@@ -13,6 +13,7 @@
 	struct kref		kref;
 	struct hlist_head	uidhash_table[UIDHASH_SZ];
 	struct user_struct	*creator;
+	struct work_struct	destroyer;
 };
 
 extern struct user_namespace init_user_ns;
diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
index 6fc13d9..ded434b 100644
--- a/include/net/net_namespace.h
+++ b/include/net/net_namespace.h
@@ -109,11 +109,6 @@
 #ifdef CONFIG_NET_NS
 extern void __put_net(struct net *net);
 
-static inline int net_alive(struct net *net)
-{
-	return net && atomic_read(&net->count);
-}
-
 static inline struct net *get_net(struct net *net)
 {
 	atomic_inc(&net->count);
@@ -145,11 +140,6 @@
 }
 #else
 
-static inline int net_alive(struct net *net)
-{
-	return 1;
-}
-
 static inline struct net *get_net(struct net *net)
 {
 	return net;
@@ -234,6 +224,23 @@
 	void (*exit)(struct net *net);
 };
 
+/*
+ * Use these carefully.  If you implement a network device and it
+ * needs per network namespace operations use device pernet operations,
+ * otherwise use pernet subsys operations.
+ *
+ * This is critically important.  Most of the network code cleanup
+ * runs with the assumption that dev_remove_pack has been called so no
+ * new packets will arrive during and after the cleanup functions have
+ * been called.  dev_remove_pack is not per namespace so instead the
+ * guarantee of no more packets arriving in a network namespace is
+ * provided by ensuring that all network devices and all sockets have
+ * left the network namespace before the cleanup methods are called.
+ *
+ * For the longest time the ipv4 icmp code was registered as a pernet
+ * device which caused kernel oops, and panics during network
+ * namespace cleanup.   So please don't get this wrong.
+ */
 extern int register_pernet_subsys(struct pernet_operations *);
 extern void unregister_pernet_subsys(struct pernet_operations *);
 extern int register_pernet_gen_subsys(int *id, struct pernet_operations *);
diff --git a/include/net/netfilter/nf_conntrack_core.h b/include/net/netfilter/nf_conntrack_core.h
index e78afe7..c25068e 100644
--- a/include/net/netfilter/nf_conntrack_core.h
+++ b/include/net/netfilter/nf_conntrack_core.h
@@ -59,7 +59,7 @@
 	struct nf_conn *ct = (struct nf_conn *)skb->nfct;
 	int ret = NF_ACCEPT;
 
-	if (ct) {
+	if (ct && ct != &nf_conntrack_untracked) {
 		if (!nf_ct_is_confirmed(ct) && !nf_ct_is_dying(ct))
 			ret = __nf_conntrack_confirm(skb);
 		nf_ct_deliver_cached_events(ct);
diff --git a/init/Kconfig b/init/Kconfig
index f068071..6869913 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -675,6 +675,9 @@
 config SYSCTL
 	bool
 
+config ANON_INODES
+	bool
+
 menuconfig EMBEDDED
 	bool "Configure standard kernel features (for small systems)"
 	help
@@ -780,18 +783,6 @@
           This option allows to disable the internal PC-Speaker
           support, saving some memory.
 
-config COMPAT_BRK
-	bool "Disable heap randomization"
-	default y
-	help
-	  Randomizing heap placement makes heap exploits harder, but it
-	  also breaks ancient binaries (including anything libc5 based).
-	  This option changes the bootup default to heap randomization
-	  disabled, and can be overriden runtime by setting
-	  /proc/sys/kernel/randomize_va_space to 2.
-
-	  On non-ancient distros (post-2000 ones) N is usually a safe choice.
-
 config BASE_FULL
 	default y
 	bool "Enable full-sized data structures for core" if EMBEDDED
@@ -809,9 +800,6 @@
 	  support for "fast userspace mutexes".  The resulting kernel may not
 	  run glibc-based applications correctly.
 
-config ANON_INODES
-	bool
-
 config EPOLL
 	bool "Enable eventpoll support" if EMBEDDED
 	default y
@@ -897,6 +885,18 @@
 	  SLUB sysfs support. /sys/slab will not exist and there will be
 	  no support for cache validation etc.
 
+config COMPAT_BRK
+	bool "Disable heap randomization"
+	default y
+	help
+	  Randomizing heap placement makes heap exploits harder, but it
+	  also breaks ancient binaries (including anything libc5 based).
+	  This option changes the bootup default to heap randomization
+	  disabled, and can be overriden runtime by setting
+	  /proc/sys/kernel/randomize_va_space to 2.
+
+	  On non-ancient distros (post-2000 ones) N is usually a safe choice.
+
 choice
 	prompt "Choose SLAB allocator"
 	default SLUB
@@ -966,7 +966,6 @@
 
 config RT_MUTEXES
 	boolean
-	select PLIST
 
 config BASE_SMALL
 	int
diff --git a/init/main.c b/init/main.c
index 8442094..83697e1 100644
--- a/init/main.c
+++ b/init/main.c
@@ -97,7 +97,7 @@
 extern void tc_init(void);
 #endif
 
-enum system_states system_state;
+enum system_states system_state __read_mostly;
 EXPORT_SYMBOL(system_state);
 
 /*
@@ -463,6 +463,7 @@
 	 * at least once to get things moving:
 	 */
 	init_idle_bootup_task(current);
+	rcu_scheduler_starting();
 	preempt_enable_no_resched();
 	schedule();
 	preempt_disable();
diff --git a/kernel/fork.c b/kernel/fork.c
index a66fbde..4854c2c 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1179,10 +1179,6 @@
 #endif
 	clear_all_latency_tracing(p);
 
-	/* Our parent execution domain becomes current domain
-	   These must match for thread signalling to apply */
-	p->parent_exec_id = p->self_exec_id;
-
 	/* ok, now we should be set up.. */
 	p->exit_signal = (clone_flags & CLONE_THREAD) ? -1 : (clone_flags & CSIGNAL);
 	p->pdeath_signal = 0;
@@ -1220,10 +1216,13 @@
 		set_task_cpu(p, smp_processor_id());
 
 	/* CLONE_PARENT re-uses the old parent */
-	if (clone_flags & (CLONE_PARENT|CLONE_THREAD))
+	if (clone_flags & (CLONE_PARENT|CLONE_THREAD)) {
 		p->real_parent = current->real_parent;
-	else
+		p->parent_exec_id = current->parent_exec_id;
+	} else {
 		p->real_parent = current;
+		p->parent_exec_id = current->self_exec_id;
+	}
 
 	spin_lock(&current->sighand->siglock);
 
diff --git a/kernel/latencytop.c b/kernel/latencytop.c
index 449db46..ca07c5c 100644
--- a/kernel/latencytop.c
+++ b/kernel/latencytop.c
@@ -9,6 +9,44 @@
  * as published by the Free Software Foundation; version 2
  * of the License.
  */
+
+/*
+ * CONFIG_LATENCYTOP enables a kernel latency tracking infrastructure that is
+ * used by the "latencytop" userspace tool. The latency that is tracked is not
+ * the 'traditional' interrupt latency (which is primarily caused by something
+ * else consuming CPU), but instead, it is the latency an application encounters
+ * because the kernel sleeps on its behalf for various reasons.
+ *
+ * This code tracks 2 levels of statistics:
+ * 1) System level latency
+ * 2) Per process latency
+ *
+ * The latency is stored in fixed sized data structures in an accumulated form;
+ * if the "same" latency cause is hit twice, this will be tracked as one entry
+ * in the data structure. Both the count, total accumulated latency and maximum
+ * latency are tracked in this data structure. When the fixed size structure is
+ * full, no new causes are tracked until the buffer is flushed by writing to
+ * the /proc file; the userspace tool does this on a regular basis.
+ *
+ * A latency cause is identified by a stringified backtrace at the point that
+ * the scheduler gets invoked. The userland tool will use this string to
+ * identify the cause of the latency in human readable form.
+ *
+ * The information is exported via /proc/latency_stats and /proc/<pid>/latency.
+ * These files look like this:
+ *
+ * Latency Top version : v0.1
+ * 70 59433 4897 i915_irq_wait drm_ioctl vfs_ioctl do_vfs_ioctl sys_ioctl
+ * |    |    |    |
+ * |    |    |    +----> the stringified backtrace
+ * |    |    +---------> The maximum latency for this entry in microseconds
+ * |    +--------------> The accumulated latency for this entry (microseconds)
+ * +-------------------> The number of times this entry is hit
+ *
+ * (note: the average latency is the accumulated latency divided by the number
+ * of times)
+ */
+
 #include <linux/latencytop.h>
 #include <linux/kallsyms.h>
 #include <linux/seq_file.h>
@@ -72,7 +110,7 @@
 				firstnonnull = i;
 			continue;
 		}
-		for (q = 0 ; q < LT_BACKTRACEDEPTH ; q++) {
+		for (q = 0; q < LT_BACKTRACEDEPTH; q++) {
 			unsigned long record = lat->backtrace[q];
 
 			if (latency_record[i].backtrace[q] != record) {
@@ -101,31 +139,52 @@
 	memcpy(&latency_record[i], lat, sizeof(struct latency_record));
 }
 
-static inline void store_stacktrace(struct task_struct *tsk, struct latency_record *lat)
+/*
+ * Iterator to store a backtrace into a latency record entry
+ */
+static inline void store_stacktrace(struct task_struct *tsk,
+					struct latency_record *lat)
 {
 	struct stack_trace trace;
 
 	memset(&trace, 0, sizeof(trace));
 	trace.max_entries = LT_BACKTRACEDEPTH;
 	trace.entries = &lat->backtrace[0];
-	trace.skip = 0;
 	save_stack_trace_tsk(tsk, &trace);
 }
 
+/**
+ * __account_scheduler_latency - record an occured latency
+ * @tsk - the task struct of the task hitting the latency
+ * @usecs - the duration of the latency in microseconds
+ * @inter - 1 if the sleep was interruptible, 0 if uninterruptible
+ *
+ * This function is the main entry point for recording latency entries
+ * as called by the scheduler.
+ *
+ * This function has a few special cases to deal with normal 'non-latency'
+ * sleeps: specifically, interruptible sleep longer than 5 msec is skipped
+ * since this usually is caused by waiting for events via select() and co.
+ *
+ * Negative latencies (caused by time going backwards) are also explicitly
+ * skipped.
+ */
 void __sched
-account_scheduler_latency(struct task_struct *tsk, int usecs, int inter)
+__account_scheduler_latency(struct task_struct *tsk, int usecs, int inter)
 {
 	unsigned long flags;
 	int i, q;
 	struct latency_record lat;
 
-	if (!latencytop_enabled)
-		return;
-
 	/* Long interruptible waits are generally user requested... */
 	if (inter && usecs > 5000)
 		return;
 
+	/* Negative sleeps are time going backwards */
+	/* Zero-time sleeps are non-interesting */
+	if (usecs <= 0)
+		return;
+
 	memset(&lat, 0, sizeof(lat));
 	lat.count = 1;
 	lat.time = usecs;
@@ -143,12 +202,12 @@
 	if (tsk->latency_record_count >= LT_SAVECOUNT)
 		goto out_unlock;
 
-	for (i = 0; i < LT_SAVECOUNT ; i++) {
+	for (i = 0; i < LT_SAVECOUNT; i++) {
 		struct latency_record *mylat;
 		int same = 1;
 
 		mylat = &tsk->latency_record[i];
-		for (q = 0 ; q < LT_BACKTRACEDEPTH ; q++) {
+		for (q = 0; q < LT_BACKTRACEDEPTH; q++) {
 			unsigned long record = lat.backtrace[q];
 
 			if (mylat->backtrace[q] != record) {
@@ -186,7 +245,7 @@
 	for (i = 0; i < MAXLR; i++) {
 		if (latency_record[i].backtrace[0]) {
 			int q;
-			seq_printf(m, "%i %li %li ",
+			seq_printf(m, "%i %lu %lu ",
 				latency_record[i].count,
 				latency_record[i].time,
 				latency_record[i].max);
@@ -223,7 +282,7 @@
 	return single_open(filp, lstats_show, NULL);
 }
 
-static struct file_operations lstats_fops = {
+static const struct file_operations lstats_fops = {
 	.open		= lstats_open,
 	.read		= seq_read,
 	.write		= lstats_write,
@@ -236,4 +295,4 @@
 	proc_create("latency_stats", 0644, NULL, &lstats_fops);
 	return 0;
 }
-__initcall(init_lstats_procfs);
+device_initcall(init_lstats_procfs);
diff --git a/kernel/rcuclassic.c b/kernel/rcuclassic.c
index bd5a900..654c640 100644
--- a/kernel/rcuclassic.c
+++ b/kernel/rcuclassic.c
@@ -679,8 +679,8 @@
 void rcu_check_callbacks(int cpu, int user)
 {
 	if (user ||
-	    (idle_cpu(cpu) && !in_softirq() &&
-				hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
+	    (idle_cpu(cpu) && rcu_scheduler_active &&
+	     !in_softirq() && hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
 
 		/*
 		 * Get here if this CPU took its interrupt from user
diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index d92a76a..cae8a05 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c
@@ -44,6 +44,7 @@
 #include <linux/cpu.h>
 #include <linux/mutex.h>
 #include <linux/module.h>
+#include <linux/kernel_stat.h>
 
 enum rcu_barrier {
 	RCU_BARRIER_STD,
@@ -55,6 +56,7 @@
 static atomic_t rcu_barrier_cpu_count;
 static DEFINE_MUTEX(rcu_barrier_mutex);
 static struct completion rcu_barrier_completion;
+int rcu_scheduler_active __read_mostly;
 
 /*
  * Awaken the corresponding synchronize_rcu() instance now that a
@@ -80,6 +82,10 @@
 void synchronize_rcu(void)
 {
 	struct rcu_synchronize rcu;
+
+	if (rcu_blocking_is_gp())
+		return;
+
 	init_completion(&rcu.completion);
 	/* Will wake me after RCU finished. */
 	call_rcu(&rcu.head, wakeme_after_rcu);
@@ -175,3 +181,9 @@
 	__rcu_init();
 }
 
+void rcu_scheduler_starting(void)
+{
+	WARN_ON(num_online_cpus() != 1);
+	WARN_ON(nr_context_switches() > 0);
+	rcu_scheduler_active = 1;
+}
diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c
index 33cfc50..5d59e85 100644
--- a/kernel/rcupreempt.c
+++ b/kernel/rcupreempt.c
@@ -1181,6 +1181,9 @@
 {
 	struct rcu_synchronize rcu;
 
+	if (num_online_cpus() == 1)
+		return;  /* blocking is gp if only one CPU! */
+
 	init_completion(&rcu.completion);
 	/* Will wake me after RCU finished. */
 	call_rcu_sched(&rcu.head, wakeme_after_rcu);
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index b2fd602..97ce315 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -948,8 +948,8 @@
 void rcu_check_callbacks(int cpu, int user)
 {
 	if (user ||
-	    (idle_cpu(cpu) && !in_softirq() &&
-				hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
+	    (idle_cpu(cpu) && rcu_scheduler_active &&
+	     !in_softirq() && hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
 
 		/*
 		 * Get here if this CPU took its interrupt from user
diff --git a/kernel/sched.c b/kernel/sched.c
index 410eec4..2f28351 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -223,7 +223,7 @@
 {
 	ktime_t now;
 
-	if (rt_bandwidth_enabled() && rt_b->rt_runtime == RUNTIME_INF)
+	if (!rt_bandwidth_enabled() || rt_b->rt_runtime == RUNTIME_INF)
 		return;
 
 	if (hrtimer_active(&rt_b->rt_period_timer))
@@ -331,6 +331,13 @@
  */
 static DEFINE_SPINLOCK(task_group_lock);
 
+#ifdef CONFIG_SMP
+static int root_task_group_empty(void)
+{
+	return list_empty(&root_task_group.children);
+}
+#endif
+
 #ifdef CONFIG_FAIR_GROUP_SCHED
 #ifdef CONFIG_USER_SCHED
 # define INIT_TASK_GROUP_LOAD	(2*NICE_0_LOAD)
@@ -391,6 +398,13 @@
 
 #else
 
+#ifdef CONFIG_SMP
+static int root_task_group_empty(void)
+{
+	return 1;
+}
+#endif
+
 static inline void set_task_rq(struct task_struct *p, unsigned int cpu) { }
 static inline struct task_group *task_group(struct task_struct *p)
 {
@@ -467,11 +481,17 @@
 	struct rt_prio_array active;
 	unsigned long rt_nr_running;
 #if defined CONFIG_SMP || defined CONFIG_RT_GROUP_SCHED
-	int highest_prio; /* highest queued rt task prio */
+	struct {
+		int curr; /* highest queued rt task prio */
+#ifdef CONFIG_SMP
+		int next; /* next highest */
+#endif
+	} highest_prio;
 #endif
 #ifdef CONFIG_SMP
 	unsigned long rt_nr_migratory;
 	int overloaded;
+	struct plist_head pushable_tasks;
 #endif
 	int rt_throttled;
 	u64 rt_time;
@@ -549,7 +569,6 @@
 	unsigned long nr_running;
 	#define CPU_LOAD_IDX_MAX 5
 	unsigned long cpu_load[CPU_LOAD_IDX_MAX];
-	unsigned char idle_at_tick;
 #ifdef CONFIG_NO_HZ
 	unsigned long last_tick_seen;
 	unsigned char in_nohz_recently;
@@ -590,6 +609,7 @@
 	struct root_domain *rd;
 	struct sched_domain *sd;
 
+	unsigned char idle_at_tick;
 	/* For active balancing */
 	int active_balance;
 	int push_cpu;
@@ -1183,10 +1203,10 @@
 
 	assert_spin_locked(&task_rq(p)->lock);
 
-	if (unlikely(test_tsk_thread_flag(p, TIF_NEED_RESCHED)))
+	if (test_tsk_need_resched(p))
 		return;
 
-	set_tsk_thread_flag(p, TIF_NEED_RESCHED);
+	set_tsk_need_resched(p);
 
 	cpu = task_cpu(p);
 	if (cpu == smp_processor_id())
@@ -1242,7 +1262,7 @@
 	 * lockless. The worst case is that the other CPU runs the
 	 * idle task through an additional NOOP schedule()
 	 */
-	set_tsk_thread_flag(rq->idle, TIF_NEED_RESCHED);
+	set_tsk_need_resched(rq->idle);
 
 	/* NEED_RESCHED must be visible before we test polling */
 	smp_mb();
@@ -1610,21 +1630,42 @@
 
 #endif
 
+#ifdef CONFIG_PREEMPT
+
 /*
- * double_lock_balance - lock the busiest runqueue, this_rq is locked already.
+ * fair double_lock_balance: Safely acquires both rq->locks in a fair
+ * way at the expense of forcing extra atomic operations in all
+ * invocations.  This assures that the double_lock is acquired using the
+ * same underlying policy as the spinlock_t on this architecture, which
+ * reduces latency compared to the unfair variant below.  However, it
+ * also adds more overhead and therefore may reduce throughput.
  */
-static int double_lock_balance(struct rq *this_rq, struct rq *busiest)
+static inline int _double_lock_balance(struct rq *this_rq, struct rq *busiest)
+	__releases(this_rq->lock)
+	__acquires(busiest->lock)
+	__acquires(this_rq->lock)
+{
+	spin_unlock(&this_rq->lock);
+	double_rq_lock(this_rq, busiest);
+
+	return 1;
+}
+
+#else
+/*
+ * Unfair double_lock_balance: Optimizes throughput at the expense of
+ * latency by eliminating extra atomic operations when the locks are
+ * already in proper order on entry.  This favors lower cpu-ids and will
+ * grant the double lock to lower cpus over higher ids under contention,
+ * regardless of entry order into the function.
+ */
+static int _double_lock_balance(struct rq *this_rq, struct rq *busiest)
 	__releases(this_rq->lock)
 	__acquires(busiest->lock)
 	__acquires(this_rq->lock)
 {
 	int ret = 0;
 
-	if (unlikely(!irqs_disabled())) {
-		/* printk() doesn't work good under rq->lock */
-		spin_unlock(&this_rq->lock);
-		BUG_ON(1);
-	}
 	if (unlikely(!spin_trylock(&busiest->lock))) {
 		if (busiest < this_rq) {
 			spin_unlock(&this_rq->lock);
@@ -1637,6 +1678,22 @@
 	return ret;
 }
 
+#endif /* CONFIG_PREEMPT */
+
+/*
+ * double_lock_balance - lock the busiest runqueue, this_rq is locked already.
+ */
+static int double_lock_balance(struct rq *this_rq, struct rq *busiest)
+{
+	if (unlikely(!irqs_disabled())) {
+		/* printk() doesn't work good under rq->lock */
+		spin_unlock(&this_rq->lock);
+		BUG_ON(1);
+	}
+
+	return _double_lock_balance(this_rq, busiest);
+}
+
 static inline void double_unlock_balance(struct rq *this_rq, struct rq *busiest)
 	__releases(busiest->lock)
 {
@@ -1705,6 +1762,9 @@
 
 static void enqueue_task(struct rq *rq, struct task_struct *p, int wakeup)
 {
+	if (wakeup)
+		p->se.start_runtime = p->se.sum_exec_runtime;
+
 	sched_info_queued(p);
 	p->sched_class->enqueue_task(rq, p, wakeup);
 	p->se.on_rq = 1;
@@ -1712,10 +1772,15 @@
 
 static void dequeue_task(struct rq *rq, struct task_struct *p, int sleep)
 {
-	if (sleep && p->se.last_wakeup) {
-		update_avg(&p->se.avg_overlap,
-			   p->se.sum_exec_runtime - p->se.last_wakeup);
-		p->se.last_wakeup = 0;
+	if (sleep) {
+		if (p->se.last_wakeup) {
+			update_avg(&p->se.avg_overlap,
+				p->se.sum_exec_runtime - p->se.last_wakeup);
+			p->se.last_wakeup = 0;
+		} else {
+			update_avg(&p->se.avg_wakeup,
+				sysctl_sched_wakeup_granularity);
+		}
 	}
 
 	sched_info_dequeued(p);
@@ -2267,7 +2332,7 @@
 		sync = 0;
 
 #ifdef CONFIG_SMP
-	if (sched_feat(LB_WAKEUP_UPDATE)) {
+	if (sched_feat(LB_WAKEUP_UPDATE) && !root_task_group_empty()) {
 		struct sched_domain *sd;
 
 		this_cpu = raw_smp_processor_id();
@@ -2345,6 +2410,22 @@
 	activate_task(rq, p, 1);
 	success = 1;
 
+	/*
+	 * Only attribute actual wakeups done by this task.
+	 */
+	if (!in_interrupt()) {
+		struct sched_entity *se = &current->se;
+		u64 sample = se->sum_exec_runtime;
+
+		if (se->last_wakeup)
+			sample -= se->last_wakeup;
+		else
+			sample -= se->start_runtime;
+		update_avg(&se->avg_wakeup, sample);
+
+		se->last_wakeup = se->sum_exec_runtime;
+	}
+
 out_running:
 	trace_sched_wakeup(rq, p, success);
 	check_preempt_curr(rq, p, sync);
@@ -2355,8 +2436,6 @@
 		p->sched_class->task_wake_up(rq, p);
 #endif
 out:
-	current->se.last_wakeup = current->se.sum_exec_runtime;
-
 	task_rq_unlock(rq, &flags);
 
 	return success;
@@ -2386,6 +2465,8 @@
 	p->se.prev_sum_exec_runtime	= 0;
 	p->se.last_wakeup		= 0;
 	p->se.avg_overlap		= 0;
+	p->se.start_runtime		= 0;
+	p->se.avg_wakeup		= sysctl_sched_wakeup_granularity;
 
 #ifdef CONFIG_SCHEDSTATS
 	p->se.wait_start		= 0;
@@ -2448,6 +2529,8 @@
 	/* Want to start with kernel preemption disabled. */
 	task_thread_info(p)->preempt_count = 1;
 #endif
+	plist_node_init(&p->pushable_tasks, MAX_PRIO);
+
 	put_cpu();
 }
 
@@ -2588,6 +2671,12 @@
 {
 	struct mm_struct *mm = rq->prev_mm;
 	long prev_state;
+#ifdef CONFIG_SMP
+	int post_schedule = 0;
+
+	if (current->sched_class->needs_post_schedule)
+		post_schedule = current->sched_class->needs_post_schedule(rq);
+#endif
 
 	rq->prev_mm = NULL;
 
@@ -2606,7 +2695,7 @@
 	finish_arch_switch(prev);
 	finish_lock_switch(rq, prev);
 #ifdef CONFIG_SMP
-	if (current->sched_class->post_schedule)
+	if (post_schedule)
 		current->sched_class->post_schedule(rq);
 #endif
 
@@ -2987,6 +3076,16 @@
 	pulled++;
 	rem_load_move -= p->se.load.weight;
 
+#ifdef CONFIG_PREEMPT
+	/*
+	 * NEWIDLE balancing is a source of latency, so preemptible kernels
+	 * will stop after the first task is pulled to minimize the critical
+	 * section.
+	 */
+	if (idle == CPU_NEWLY_IDLE)
+		goto out;
+#endif
+
 	/*
 	 * We only want to steal up to the prescribed amount of weighted load.
 	 */
@@ -3033,9 +3132,15 @@
 				sd, idle, all_pinned, &this_best_prio);
 		class = class->next;
 
+#ifdef CONFIG_PREEMPT
+		/*
+		 * NEWIDLE balancing is a source of latency, so preemptible
+		 * kernels will stop after the first task is pulled to minimize
+		 * the critical section.
+		 */
 		if (idle == CPU_NEWLY_IDLE && this_rq->nr_running)
 			break;
-
+#endif
 	} while (class && max_load_move > total_load_moved);
 
 	return total_load_moved > 0;
@@ -4057,6 +4162,11 @@
 #endif
 }
 
+static inline int on_null_domain(int cpu)
+{
+	return !rcu_dereference(cpu_rq(cpu)->sd);
+}
+
 /*
  * Trigger the SCHED_SOFTIRQ if it is time to do periodic load balancing.
  *
@@ -4114,7 +4224,9 @@
 	    cpumask_test_cpu(cpu, nohz.cpu_mask))
 		return;
 #endif
-	if (time_after_eq(jiffies, rq->next_balance))
+	/* Don't need to rebalance while attached to NULL domain */
+	if (time_after_eq(jiffies, rq->next_balance) &&
+	    likely(!on_null_domain(cpu)))
 		raise_softirq(SCHED_SOFTIRQ);
 }
 
@@ -4508,11 +4620,33 @@
 #endif
 }
 
+static void put_prev_task(struct rq *rq, struct task_struct *prev)
+{
+	if (prev->state == TASK_RUNNING) {
+		u64 runtime = prev->se.sum_exec_runtime;
+
+		runtime -= prev->se.prev_sum_exec_runtime;
+		runtime = min_t(u64, runtime, 2*sysctl_sched_migration_cost);
+
+		/*
+		 * In order to avoid avg_overlap growing stale when we are
+		 * indeed overlapping and hence not getting put to sleep, grow
+		 * the avg_overlap on preemption.
+		 *
+		 * We use the average preemption runtime because that
+		 * correlates to the amount of cache footprint a task can
+		 * build up.
+		 */
+		update_avg(&prev->se.avg_overlap, runtime);
+	}
+	prev->sched_class->put_prev_task(rq, prev);
+}
+
 /*
  * Pick up the highest-prio task:
  */
 static inline struct task_struct *
-pick_next_task(struct rq *rq, struct task_struct *prev)
+pick_next_task(struct rq *rq)
 {
 	const struct sched_class *class;
 	struct task_struct *p;
@@ -4586,8 +4720,8 @@
 	if (unlikely(!rq->nr_running))
 		idle_balance(cpu, rq);
 
-	prev->sched_class->put_prev_task(rq, prev);
-	next = pick_next_task(rq, prev);
+	put_prev_task(rq, prev);
+	next = pick_next_task(rq);
 
 	if (likely(prev != next)) {
 		sched_info_switch(prev, next);
@@ -4642,7 +4776,7 @@
 		 * between schedule and now.
 		 */
 		barrier();
-	} while (unlikely(test_thread_flag(TIF_NEED_RESCHED)));
+	} while (need_resched());
 }
 EXPORT_SYMBOL(preempt_schedule);
 
@@ -4671,7 +4805,7 @@
 		 * between schedule and now.
 		 */
 		barrier();
-	} while (unlikely(test_thread_flag(TIF_NEED_RESCHED)));
+	} while (need_resched());
 }
 
 #endif /* CONFIG_PREEMPT */
@@ -5145,7 +5279,7 @@
 	if (increment > 40)
 		increment = 40;
 
-	nice = PRIO_TO_NICE(current->static_prio) + increment;
+	nice = TASK_NICE(current) + increment;
 	if (nice < -20)
 		nice = -20;
 	if (nice > 19)
@@ -6423,7 +6557,7 @@
 		if (!rq->nr_running)
 			break;
 		update_rq_clock(rq);
-		next = pick_next_task(rq, rq->curr);
+		next = pick_next_task(rq);
 		if (!next)
 			break;
 		next->sched_class->put_prev_task(rq, next);
@@ -8218,11 +8352,15 @@
 	__set_bit(MAX_RT_PRIO, array->bitmap);
 
 #if defined CONFIG_SMP || defined CONFIG_RT_GROUP_SCHED
-	rt_rq->highest_prio = MAX_RT_PRIO;
+	rt_rq->highest_prio.curr = MAX_RT_PRIO;
+#ifdef CONFIG_SMP
+	rt_rq->highest_prio.next = MAX_RT_PRIO;
+#endif
 #endif
 #ifdef CONFIG_SMP
 	rt_rq->rt_nr_migratory = 0;
 	rt_rq->overloaded = 0;
+	plist_head_init(&rq->rt.pushable_tasks, &rq->lock);
 #endif
 
 	rt_rq->rt_time = 0;
@@ -9224,6 +9362,16 @@
 
 	return ret;
 }
+
+int sched_rt_can_attach(struct task_group *tg, struct task_struct *tsk)
+{
+	/* Don't accept realtime tasks when there is no way for them to run */
+	if (rt_task(tsk) && tg->rt_bandwidth.rt_runtime == 0)
+		return 0;
+
+	return 1;
+}
+
 #else /* !CONFIG_RT_GROUP_SCHED */
 static int sched_rt_global_constraints(void)
 {
@@ -9317,8 +9465,7 @@
 		      struct task_struct *tsk)
 {
 #ifdef CONFIG_RT_GROUP_SCHED
-	/* Don't accept realtime tasks when there is no way for them to run */
-	if (rt_task(tsk) && cgroup_tg(cgrp)->rt_bandwidth.rt_runtime == 0)
+	if (!sched_rt_can_attach(cgroup_tg(cgrp), tsk))
 		return -EINVAL;
 #else
 	/* We don't support RT-tasks being in separate groups */
@@ -9589,7 +9736,7 @@
 	struct cpuacct *ca;
 	int cpu;
 
-	if (!cpuacct_subsys.active)
+	if (unlikely(!cpuacct_subsys.active))
 		return;
 
 	cpu = task_cpu(tsk);
diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c
index 16eeba4e..2b1260f 100644
--- a/kernel/sched_debug.c
+++ b/kernel/sched_debug.c
@@ -397,6 +397,7 @@
 	PN(se.vruntime);
 	PN(se.sum_exec_runtime);
 	PN(se.avg_overlap);
+	PN(se.avg_wakeup);
 
 	nr_switches = p->nvcsw + p->nivcsw;
 
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 0566f2a..3816f21 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -1314,16 +1314,63 @@
 }
 #endif /* CONFIG_SMP */
 
-static unsigned long wakeup_gran(struct sched_entity *se)
+/*
+ * Adaptive granularity
+ *
+ * se->avg_wakeup gives the average time a task runs until it does a wakeup,
+ * with the limit of wakeup_gran -- when it never does a wakeup.
+ *
+ * So the smaller avg_wakeup is the faster we want this task to preempt,
+ * but we don't want to treat the preemptee unfairly and therefore allow it
+ * to run for at least the amount of time we'd like to run.
+ *
+ * NOTE: we use 2*avg_wakeup to increase the probability of actually doing one
+ *
+ * NOTE: we use *nr_running to scale with load, this nicely matches the
+ *       degrading latency on load.
+ */
+static unsigned long
+adaptive_gran(struct sched_entity *curr, struct sched_entity *se)
+{
+	u64 this_run = curr->sum_exec_runtime - curr->prev_sum_exec_runtime;
+	u64 expected_wakeup = 2*se->avg_wakeup * cfs_rq_of(se)->nr_running;
+	u64 gran = 0;
+
+	if (this_run < expected_wakeup)
+		gran = expected_wakeup - this_run;
+
+	return min_t(s64, gran, sysctl_sched_wakeup_granularity);
+}
+
+static unsigned long
+wakeup_gran(struct sched_entity *curr, struct sched_entity *se)
 {
 	unsigned long gran = sysctl_sched_wakeup_granularity;
 
+	if (cfs_rq_of(curr)->curr && sched_feat(ADAPTIVE_GRAN))
+		gran = adaptive_gran(curr, se);
+
 	/*
-	 * More easily preempt - nice tasks, while not making it harder for
-	 * + nice tasks.
+	 * Since its curr running now, convert the gran from real-time
+	 * to virtual-time in his units.
 	 */
-	if (!sched_feat(ASYM_GRAN) || se->load.weight > NICE_0_LOAD)
-		gran = calc_delta_fair(sysctl_sched_wakeup_granularity, se);
+	if (sched_feat(ASYM_GRAN)) {
+		/*
+		 * By using 'se' instead of 'curr' we penalize light tasks, so
+		 * they get preempted easier. That is, if 'se' < 'curr' then
+		 * the resulting gran will be larger, therefore penalizing the
+		 * lighter, if otoh 'se' > 'curr' then the resulting gran will
+		 * be smaller, again penalizing the lighter task.
+		 *
+		 * This is especially important for buddies when the leftmost
+		 * task is higher priority than the buddy.
+		 */
+		if (unlikely(se->load.weight != NICE_0_LOAD))
+			gran = calc_delta_fair(gran, se);
+	} else {
+		if (unlikely(curr->load.weight != NICE_0_LOAD))
+			gran = calc_delta_fair(gran, curr);
+	}
 
 	return gran;
 }
@@ -1350,7 +1397,7 @@
 	if (vdiff <= 0)
 		return -1;
 
-	gran = wakeup_gran(curr);
+	gran = wakeup_gran(curr, se);
 	if (vdiff > gran)
 		return 1;
 
diff --git a/kernel/sched_features.h b/kernel/sched_features.h
index da5d93b..76f6175 100644
--- a/kernel/sched_features.h
+++ b/kernel/sched_features.h
@@ -1,5 +1,6 @@
 SCHED_FEAT(NEW_FAIR_SLEEPERS, 1)
-SCHED_FEAT(NORMALIZED_SLEEPER, 1)
+SCHED_FEAT(NORMALIZED_SLEEPER, 0)
+SCHED_FEAT(ADAPTIVE_GRAN, 1)
 SCHED_FEAT(WAKEUP_PREEMPT, 1)
 SCHED_FEAT(START_DEBIT, 1)
 SCHED_FEAT(AFFINE_WAKEUPS, 1)
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index bac1061..c79dc78 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -3,6 +3,40 @@
  * policies)
  */
 
+static inline struct task_struct *rt_task_of(struct sched_rt_entity *rt_se)
+{
+	return container_of(rt_se, struct task_struct, rt);
+}
+
+#ifdef CONFIG_RT_GROUP_SCHED
+
+static inline struct rq *rq_of_rt_rq(struct rt_rq *rt_rq)
+{
+	return rt_rq->rq;
+}
+
+static inline struct rt_rq *rt_rq_of_se(struct sched_rt_entity *rt_se)
+{
+	return rt_se->rt_rq;
+}
+
+#else /* CONFIG_RT_GROUP_SCHED */
+
+static inline struct rq *rq_of_rt_rq(struct rt_rq *rt_rq)
+{
+	return container_of(rt_rq, struct rq, rt);
+}
+
+static inline struct rt_rq *rt_rq_of_se(struct sched_rt_entity *rt_se)
+{
+	struct task_struct *p = rt_task_of(rt_se);
+	struct rq *rq = task_rq(p);
+
+	return &rq->rt;
+}
+
+#endif /* CONFIG_RT_GROUP_SCHED */
+
 #ifdef CONFIG_SMP
 
 static inline int rt_overloaded(struct rq *rq)
@@ -37,25 +71,69 @@
 	cpumask_clear_cpu(rq->cpu, rq->rd->rto_mask);
 }
 
-static void update_rt_migration(struct rq *rq)
+static void update_rt_migration(struct rt_rq *rt_rq)
 {
-	if (rq->rt.rt_nr_migratory && (rq->rt.rt_nr_running > 1)) {
-		if (!rq->rt.overloaded) {
-			rt_set_overload(rq);
-			rq->rt.overloaded = 1;
+	if (rt_rq->rt_nr_migratory && (rt_rq->rt_nr_running > 1)) {
+		if (!rt_rq->overloaded) {
+			rt_set_overload(rq_of_rt_rq(rt_rq));
+			rt_rq->overloaded = 1;
 		}
-	} else if (rq->rt.overloaded) {
-		rt_clear_overload(rq);
-		rq->rt.overloaded = 0;
+	} else if (rt_rq->overloaded) {
+		rt_clear_overload(rq_of_rt_rq(rt_rq));
+		rt_rq->overloaded = 0;
 	}
 }
-#endif /* CONFIG_SMP */
 
-static inline struct task_struct *rt_task_of(struct sched_rt_entity *rt_se)
+static void inc_rt_migration(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
 {
-	return container_of(rt_se, struct task_struct, rt);
+	if (rt_se->nr_cpus_allowed > 1)
+		rt_rq->rt_nr_migratory++;
+
+	update_rt_migration(rt_rq);
 }
 
+static void dec_rt_migration(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
+{
+	if (rt_se->nr_cpus_allowed > 1)
+		rt_rq->rt_nr_migratory--;
+
+	update_rt_migration(rt_rq);
+}
+
+static void enqueue_pushable_task(struct rq *rq, struct task_struct *p)
+{
+	plist_del(&p->pushable_tasks, &rq->rt.pushable_tasks);
+	plist_node_init(&p->pushable_tasks, p->prio);
+	plist_add(&p->pushable_tasks, &rq->rt.pushable_tasks);
+}
+
+static void dequeue_pushable_task(struct rq *rq, struct task_struct *p)
+{
+	plist_del(&p->pushable_tasks, &rq->rt.pushable_tasks);
+}
+
+#else
+
+static inline void enqueue_pushable_task(struct rq *rq, struct task_struct *p)
+{
+}
+
+static inline void dequeue_pushable_task(struct rq *rq, struct task_struct *p)
+{
+}
+
+static inline
+void inc_rt_migration(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
+{
+}
+
+static inline
+void dec_rt_migration(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
+{
+}
+
+#endif /* CONFIG_SMP */
+
 static inline int on_rt_rq(struct sched_rt_entity *rt_se)
 {
 	return !list_empty(&rt_se->run_list);
@@ -79,16 +157,6 @@
 #define for_each_leaf_rt_rq(rt_rq, rq) \
 	list_for_each_entry_rcu(rt_rq, &rq->leaf_rt_rq_list, leaf_rt_rq_list)
 
-static inline struct rq *rq_of_rt_rq(struct rt_rq *rt_rq)
-{
-	return rt_rq->rq;
-}
-
-static inline struct rt_rq *rt_rq_of_se(struct sched_rt_entity *rt_se)
-{
-	return rt_se->rt_rq;
-}
-
 #define for_each_sched_rt_entity(rt_se) \
 	for (; rt_se; rt_se = rt_se->parent)
 
@@ -108,7 +176,7 @@
 	if (rt_rq->rt_nr_running) {
 		if (rt_se && !on_rt_rq(rt_se))
 			enqueue_rt_entity(rt_se);
-		if (rt_rq->highest_prio < curr->prio)
+		if (rt_rq->highest_prio.curr < curr->prio)
 			resched_task(curr);
 	}
 }
@@ -176,19 +244,6 @@
 #define for_each_leaf_rt_rq(rt_rq, rq) \
 	for (rt_rq = &rq->rt; rt_rq; rt_rq = NULL)
 
-static inline struct rq *rq_of_rt_rq(struct rt_rq *rt_rq)
-{
-	return container_of(rt_rq, struct rq, rt);
-}
-
-static inline struct rt_rq *rt_rq_of_se(struct sched_rt_entity *rt_se)
-{
-	struct task_struct *p = rt_task_of(rt_se);
-	struct rq *rq = task_rq(p);
-
-	return &rq->rt;
-}
-
 #define for_each_sched_rt_entity(rt_se) \
 	for (; rt_se; rt_se = NULL)
 
@@ -473,7 +528,7 @@
 	struct rt_rq *rt_rq = group_rt_rq(rt_se);
 
 	if (rt_rq)
-		return rt_rq->highest_prio;
+		return rt_rq->highest_prio.curr;
 #endif
 
 	return rt_task_of(rt_se)->prio;
@@ -547,91 +602,174 @@
 	}
 }
 
-static inline
-void inc_rt_tasks(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
+#if defined CONFIG_SMP
+
+static struct task_struct *pick_next_highest_task_rt(struct rq *rq, int cpu);
+
+static inline int next_prio(struct rq *rq)
 {
-	WARN_ON(!rt_prio(rt_se_prio(rt_se)));
-	rt_rq->rt_nr_running++;
-#if defined CONFIG_SMP || defined CONFIG_RT_GROUP_SCHED
-	if (rt_se_prio(rt_se) < rt_rq->highest_prio) {
-#ifdef CONFIG_SMP
-		struct rq *rq = rq_of_rt_rq(rt_rq);
-#endif
+	struct task_struct *next = pick_next_highest_task_rt(rq, rq->cpu);
 
-		rt_rq->highest_prio = rt_se_prio(rt_se);
-#ifdef CONFIG_SMP
+	if (next && rt_prio(next->prio))
+		return next->prio;
+	else
+		return MAX_RT_PRIO;
+}
+
+static void
+inc_rt_prio_smp(struct rt_rq *rt_rq, int prio, int prev_prio)
+{
+	struct rq *rq = rq_of_rt_rq(rt_rq);
+
+	if (prio < prev_prio) {
+
+		/*
+		 * If the new task is higher in priority than anything on the
+		 * run-queue, we know that the previous high becomes our
+		 * next-highest.
+		 */
+		rt_rq->highest_prio.next = prev_prio;
+
 		if (rq->online)
-			cpupri_set(&rq->rd->cpupri, rq->cpu,
-				   rt_se_prio(rt_se));
-#endif
-	}
-#endif
-#ifdef CONFIG_SMP
-	if (rt_se->nr_cpus_allowed > 1) {
-		struct rq *rq = rq_of_rt_rq(rt_rq);
+			cpupri_set(&rq->rd->cpupri, rq->cpu, prio);
 
-		rq->rt.rt_nr_migratory++;
-	}
+	} else if (prio == rt_rq->highest_prio.curr)
+		/*
+		 * If the next task is equal in priority to the highest on
+		 * the run-queue, then we implicitly know that the next highest
+		 * task cannot be any lower than current
+		 */
+		rt_rq->highest_prio.next = prio;
+	else if (prio < rt_rq->highest_prio.next)
+		/*
+		 * Otherwise, we need to recompute next-highest
+		 */
+		rt_rq->highest_prio.next = next_prio(rq);
+}
 
-	update_rt_migration(rq_of_rt_rq(rt_rq));
-#endif
+static void
+dec_rt_prio_smp(struct rt_rq *rt_rq, int prio, int prev_prio)
+{
+	struct rq *rq = rq_of_rt_rq(rt_rq);
+
+	if (rt_rq->rt_nr_running && (prio <= rt_rq->highest_prio.next))
+		rt_rq->highest_prio.next = next_prio(rq);
+
+	if (rq->online && rt_rq->highest_prio.curr != prev_prio)
+		cpupri_set(&rq->rd->cpupri, rq->cpu, rt_rq->highest_prio.curr);
+}
+
+#else /* CONFIG_SMP */
+
+static inline
+void inc_rt_prio_smp(struct rt_rq *rt_rq, int prio, int prev_prio) {}
+static inline
+void dec_rt_prio_smp(struct rt_rq *rt_rq, int prio, int prev_prio) {}
+
+#endif /* CONFIG_SMP */
+
+#if defined CONFIG_SMP || defined CONFIG_RT_GROUP_SCHED
+static void
+inc_rt_prio(struct rt_rq *rt_rq, int prio)
+{
+	int prev_prio = rt_rq->highest_prio.curr;
+
+	if (prio < prev_prio)
+		rt_rq->highest_prio.curr = prio;
+
+	inc_rt_prio_smp(rt_rq, prio, prev_prio);
+}
+
+static void
+dec_rt_prio(struct rt_rq *rt_rq, int prio)
+{
+	int prev_prio = rt_rq->highest_prio.curr;
+
+	if (rt_rq->rt_nr_running) {
+
+		WARN_ON(prio < prev_prio);
+
+		/*
+		 * This may have been our highest task, and therefore
+		 * we may have some recomputation to do
+		 */
+		if (prio == prev_prio) {
+			struct rt_prio_array *array = &rt_rq->active;
+
+			rt_rq->highest_prio.curr =
+				sched_find_first_bit(array->bitmap);
+		}
+
+	} else
+		rt_rq->highest_prio.curr = MAX_RT_PRIO;
+
+	dec_rt_prio_smp(rt_rq, prio, prev_prio);
+}
+
+#else
+
+static inline void inc_rt_prio(struct rt_rq *rt_rq, int prio) {}
+static inline void dec_rt_prio(struct rt_rq *rt_rq, int prio) {}
+
+#endif /* CONFIG_SMP || CONFIG_RT_GROUP_SCHED */
+
 #ifdef CONFIG_RT_GROUP_SCHED
+
+static void
+inc_rt_group(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
+{
 	if (rt_se_boosted(rt_se))
 		rt_rq->rt_nr_boosted++;
 
 	if (rt_rq->tg)
 		start_rt_bandwidth(&rt_rq->tg->rt_bandwidth);
-#else
+}
+
+static void
+dec_rt_group(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
+{
+	if (rt_se_boosted(rt_se))
+		rt_rq->rt_nr_boosted--;
+
+	WARN_ON(!rt_rq->rt_nr_running && rt_rq->rt_nr_boosted);
+}
+
+#else /* CONFIG_RT_GROUP_SCHED */
+
+static void
+inc_rt_group(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
+{
 	start_rt_bandwidth(&def_rt_bandwidth);
-#endif
+}
+
+static inline
+void dec_rt_group(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq) {}
+
+#endif /* CONFIG_RT_GROUP_SCHED */
+
+static inline
+void inc_rt_tasks(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
+{
+	int prio = rt_se_prio(rt_se);
+
+	WARN_ON(!rt_prio(prio));
+	rt_rq->rt_nr_running++;
+
+	inc_rt_prio(rt_rq, prio);
+	inc_rt_migration(rt_se, rt_rq);
+	inc_rt_group(rt_se, rt_rq);
 }
 
 static inline
 void dec_rt_tasks(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
 {
-#ifdef CONFIG_SMP
-	int highest_prio = rt_rq->highest_prio;
-#endif
-
 	WARN_ON(!rt_prio(rt_se_prio(rt_se)));
 	WARN_ON(!rt_rq->rt_nr_running);
 	rt_rq->rt_nr_running--;
-#if defined CONFIG_SMP || defined CONFIG_RT_GROUP_SCHED
-	if (rt_rq->rt_nr_running) {
-		struct rt_prio_array *array;
 
-		WARN_ON(rt_se_prio(rt_se) < rt_rq->highest_prio);
-		if (rt_se_prio(rt_se) == rt_rq->highest_prio) {
-			/* recalculate */
-			array = &rt_rq->active;
-			rt_rq->highest_prio =
-				sched_find_first_bit(array->bitmap);
-		} /* otherwise leave rq->highest prio alone */
-	} else
-		rt_rq->highest_prio = MAX_RT_PRIO;
-#endif
-#ifdef CONFIG_SMP
-	if (rt_se->nr_cpus_allowed > 1) {
-		struct rq *rq = rq_of_rt_rq(rt_rq);
-		rq->rt.rt_nr_migratory--;
-	}
-
-	if (rt_rq->highest_prio != highest_prio) {
-		struct rq *rq = rq_of_rt_rq(rt_rq);
-
-		if (rq->online)
-			cpupri_set(&rq->rd->cpupri, rq->cpu,
-				   rt_rq->highest_prio);
-	}
-
-	update_rt_migration(rq_of_rt_rq(rt_rq));
-#endif /* CONFIG_SMP */
-#ifdef CONFIG_RT_GROUP_SCHED
-	if (rt_se_boosted(rt_se))
-		rt_rq->rt_nr_boosted--;
-
-	WARN_ON(!rt_rq->rt_nr_running && rt_rq->rt_nr_boosted);
-#endif
+	dec_rt_prio(rt_rq, rt_se_prio(rt_se));
+	dec_rt_migration(rt_se, rt_rq);
+	dec_rt_group(rt_se, rt_rq);
 }
 
 static void __enqueue_rt_entity(struct sched_rt_entity *rt_se)
@@ -718,6 +856,9 @@
 
 	enqueue_rt_entity(rt_se);
 
+	if (!task_current(rq, p) && p->rt.nr_cpus_allowed > 1)
+		enqueue_pushable_task(rq, p);
+
 	inc_cpu_load(rq, p->se.load.weight);
 }
 
@@ -728,6 +869,8 @@
 	update_curr_rt(rq);
 	dequeue_rt_entity(rt_se);
 
+	dequeue_pushable_task(rq, p);
+
 	dec_cpu_load(rq, p->se.load.weight);
 }
 
@@ -878,7 +1021,7 @@
 	return next;
 }
 
-static struct task_struct *pick_next_task_rt(struct rq *rq)
+static struct task_struct *_pick_next_task_rt(struct rq *rq)
 {
 	struct sched_rt_entity *rt_se;
 	struct task_struct *p;
@@ -900,6 +1043,18 @@
 
 	p = rt_task_of(rt_se);
 	p->se.exec_start = rq->clock;
+
+	return p;
+}
+
+static struct task_struct *pick_next_task_rt(struct rq *rq)
+{
+	struct task_struct *p = _pick_next_task_rt(rq);
+
+	/* The running task is never eligible for pushing */
+	if (p)
+		dequeue_pushable_task(rq, p);
+
 	return p;
 }
 
@@ -907,6 +1062,13 @@
 {
 	update_curr_rt(rq);
 	p->se.exec_start = 0;
+
+	/*
+	 * The previous task needs to be made eligible for pushing
+	 * if it is still active
+	 */
+	if (p->se.on_rq && p->rt.nr_cpus_allowed > 1)
+		enqueue_pushable_task(rq, p);
 }
 
 #ifdef CONFIG_SMP
@@ -1072,7 +1234,7 @@
 		}
 
 		/* If this rq is still suitable use it. */
-		if (lowest_rq->rt.highest_prio > task->prio)
+		if (lowest_rq->rt.highest_prio.curr > task->prio)
 			break;
 
 		/* try again */
@@ -1083,6 +1245,31 @@
 	return lowest_rq;
 }
 
+static inline int has_pushable_tasks(struct rq *rq)
+{
+	return !plist_head_empty(&rq->rt.pushable_tasks);
+}
+
+static struct task_struct *pick_next_pushable_task(struct rq *rq)
+{
+	struct task_struct *p;
+
+	if (!has_pushable_tasks(rq))
+		return NULL;
+
+	p = plist_first_entry(&rq->rt.pushable_tasks,
+			      struct task_struct, pushable_tasks);
+
+	BUG_ON(rq->cpu != task_cpu(p));
+	BUG_ON(task_current(rq, p));
+	BUG_ON(p->rt.nr_cpus_allowed <= 1);
+
+	BUG_ON(!p->se.on_rq);
+	BUG_ON(!rt_task(p));
+
+	return p;
+}
+
 /*
  * If the current CPU has more than one RT task, see if the non
  * running task can migrate over to a CPU that is running a task
@@ -1092,13 +1279,11 @@
 {
 	struct task_struct *next_task;
 	struct rq *lowest_rq;
-	int ret = 0;
-	int paranoid = RT_MAX_TRIES;
 
 	if (!rq->rt.overloaded)
 		return 0;
 
-	next_task = pick_next_highest_task_rt(rq, -1);
+	next_task = pick_next_pushable_task(rq);
 	if (!next_task)
 		return 0;
 
@@ -1127,16 +1312,34 @@
 		struct task_struct *task;
 		/*
 		 * find lock_lowest_rq releases rq->lock
-		 * so it is possible that next_task has changed.
-		 * If it has, then try again.
+		 * so it is possible that next_task has migrated.
+		 *
+		 * We need to make sure that the task is still on the same
+		 * run-queue and is also still the next task eligible for
+		 * pushing.
 		 */
-		task = pick_next_highest_task_rt(rq, -1);
-		if (unlikely(task != next_task) && task && paranoid--) {
-			put_task_struct(next_task);
-			next_task = task;
-			goto retry;
+		task = pick_next_pushable_task(rq);
+		if (task_cpu(next_task) == rq->cpu && task == next_task) {
+			/*
+			 * If we get here, the task hasnt moved at all, but
+			 * it has failed to push.  We will not try again,
+			 * since the other cpus will pull from us when they
+			 * are ready.
+			 */
+			dequeue_pushable_task(rq, next_task);
+			goto out;
 		}
-		goto out;
+
+		if (!task)
+			/* No more tasks, just exit */
+			goto out;
+
+		/*
+		 * Something has shifted, try again.
+		 */
+		put_task_struct(next_task);
+		next_task = task;
+		goto retry;
 	}
 
 	deactivate_task(rq, next_task, 0);
@@ -1147,23 +1350,12 @@
 
 	double_unlock_balance(rq, lowest_rq);
 
-	ret = 1;
 out:
 	put_task_struct(next_task);
 
-	return ret;
+	return 1;
 }
 
-/*
- * TODO: Currently we just use the second highest prio task on
- *       the queue, and stop when it can't migrate (or there's
- *       no more RT tasks).  There may be a case where a lower
- *       priority RT task has a different affinity than the
- *       higher RT task. In this case the lower RT task could
- *       possibly be able to migrate where as the higher priority
- *       RT task could not.  We currently ignore this issue.
- *       Enhancements are welcome!
- */
 static void push_rt_tasks(struct rq *rq)
 {
 	/* push_rt_task will return true if it moved an RT */
@@ -1174,33 +1366,35 @@
 static int pull_rt_task(struct rq *this_rq)
 {
 	int this_cpu = this_rq->cpu, ret = 0, cpu;
-	struct task_struct *p, *next;
+	struct task_struct *p;
 	struct rq *src_rq;
 
 	if (likely(!rt_overloaded(this_rq)))
 		return 0;
 
-	next = pick_next_task_rt(this_rq);
-
 	for_each_cpu(cpu, this_rq->rd->rto_mask) {
 		if (this_cpu == cpu)
 			continue;
 
 		src_rq = cpu_rq(cpu);
+
+		/*
+		 * Don't bother taking the src_rq->lock if the next highest
+		 * task is known to be lower-priority than our current task.
+		 * This may look racy, but if this value is about to go
+		 * logically higher, the src_rq will push this task away.
+		 * And if its going logically lower, we do not care
+		 */
+		if (src_rq->rt.highest_prio.next >=
+		    this_rq->rt.highest_prio.curr)
+			continue;
+
 		/*
 		 * We can potentially drop this_rq's lock in
 		 * double_lock_balance, and another CPU could
-		 * steal our next task - hence we must cause
-		 * the caller to recalculate the next task
-		 * in that case:
+		 * alter this_rq
 		 */
-		if (double_lock_balance(this_rq, src_rq)) {
-			struct task_struct *old_next = next;
-
-			next = pick_next_task_rt(this_rq);
-			if (next != old_next)
-				ret = 1;
-		}
+		double_lock_balance(this_rq, src_rq);
 
 		/*
 		 * Are there still pullable RT tasks?
@@ -1214,7 +1408,7 @@
 		 * Do we have an RT task that preempts
 		 * the to-be-scheduled task?
 		 */
-		if (p && (!next || (p->prio < next->prio))) {
+		if (p && (p->prio < this_rq->rt.highest_prio.curr)) {
 			WARN_ON(p == src_rq->curr);
 			WARN_ON(!p->se.on_rq);
 
@@ -1224,12 +1418,9 @@
 			 * This is just that p is wakeing up and hasn't
 			 * had a chance to schedule. We only pull
 			 * p if it is lower in priority than the
-			 * current task on the run queue or
-			 * this_rq next task is lower in prio than
-			 * the current task on that rq.
+			 * current task on the run queue
 			 */
-			if (p->prio < src_rq->curr->prio ||
-			    (next && next->prio < src_rq->curr->prio))
+			if (p->prio < src_rq->curr->prio)
 				goto skip;
 
 			ret = 1;
@@ -1242,13 +1433,7 @@
 			 * case there's an even higher prio task
 			 * in another runqueue. (low likelyhood
 			 * but possible)
-			 *
-			 * Update next so that we won't pick a task
-			 * on another cpu with a priority lower (or equal)
-			 * than the one we just picked.
 			 */
-			next = p;
-
 		}
  skip:
 		double_unlock_balance(this_rq, src_rq);
@@ -1260,24 +1445,27 @@
 static void pre_schedule_rt(struct rq *rq, struct task_struct *prev)
 {
 	/* Try to pull RT tasks here if we lower this rq's prio */
-	if (unlikely(rt_task(prev)) && rq->rt.highest_prio > prev->prio)
+	if (unlikely(rt_task(prev)) && rq->rt.highest_prio.curr > prev->prio)
 		pull_rt_task(rq);
 }
 
+/*
+ * assumes rq->lock is held
+ */
+static int needs_post_schedule_rt(struct rq *rq)
+{
+	return has_pushable_tasks(rq);
+}
+
 static void post_schedule_rt(struct rq *rq)
 {
 	/*
-	 * If we have more than one rt_task queued, then
-	 * see if we can push the other rt_tasks off to other CPUS.
-	 * Note we may release the rq lock, and since
-	 * the lock was owned by prev, we need to release it
-	 * first via finish_lock_switch and then reaquire it here.
+	 * This is only called if needs_post_schedule_rt() indicates that
+	 * we need to push tasks away
 	 */
-	if (unlikely(rq->rt.overloaded)) {
-		spin_lock_irq(&rq->lock);
-		push_rt_tasks(rq);
-		spin_unlock_irq(&rq->lock);
-	}
+	spin_lock_irq(&rq->lock);
+	push_rt_tasks(rq);
+	spin_unlock_irq(&rq->lock);
 }
 
 /*
@@ -1288,7 +1476,8 @@
 {
 	if (!task_running(rq, p) &&
 	    !test_tsk_need_resched(rq->curr) &&
-	    rq->rt.overloaded)
+	    has_pushable_tasks(rq) &&
+	    p->rt.nr_cpus_allowed > 1)
 		push_rt_tasks(rq);
 }
 
@@ -1324,6 +1513,24 @@
 	if (p->se.on_rq && (weight != p->rt.nr_cpus_allowed)) {
 		struct rq *rq = task_rq(p);
 
+		if (!task_current(rq, p)) {
+			/*
+			 * Make sure we dequeue this task from the pushable list
+			 * before going further.  It will either remain off of
+			 * the list because we are no longer pushable, or it
+			 * will be requeued.
+			 */
+			if (p->rt.nr_cpus_allowed > 1)
+				dequeue_pushable_task(rq, p);
+
+			/*
+			 * Requeue if our weight is changing and still > 1
+			 */
+			if (weight > 1)
+				enqueue_pushable_task(rq, p);
+
+		}
+
 		if ((p->rt.nr_cpus_allowed <= 1) && (weight > 1)) {
 			rq->rt.rt_nr_migratory++;
 		} else if ((p->rt.nr_cpus_allowed > 1) && (weight <= 1)) {
@@ -1331,7 +1538,7 @@
 			rq->rt.rt_nr_migratory--;
 		}
 
-		update_rt_migration(rq);
+		update_rt_migration(&rq->rt);
 	}
 
 	cpumask_copy(&p->cpus_allowed, new_mask);
@@ -1346,7 +1553,7 @@
 
 	__enable_runtime(rq);
 
-	cpupri_set(&rq->rd->cpupri, rq->cpu, rq->rt.highest_prio);
+	cpupri_set(&rq->rd->cpupri, rq->cpu, rq->rt.highest_prio.curr);
 }
 
 /* Assumes rq->lock is held */
@@ -1438,7 +1645,7 @@
 		 * can release the rq lock and p could migrate.
 		 * Only reschedule if p is still on the same runqueue.
 		 */
-		if (p->prio > rq->rt.highest_prio && rq->curr == p)
+		if (p->prio > rq->rt.highest_prio.curr && rq->curr == p)
 			resched_task(p);
 #else
 		/* For UP simply resched on drop of prio */
@@ -1509,6 +1716,9 @@
 	struct task_struct *p = rq->curr;
 
 	p->se.exec_start = rq->clock;
+
+	/* The running task is never eligible for pushing */
+	dequeue_pushable_task(rq, p);
 }
 
 static const struct sched_class rt_sched_class = {
@@ -1531,6 +1741,7 @@
 	.rq_online              = rq_online_rt,
 	.rq_offline             = rq_offline_rt,
 	.pre_schedule		= pre_schedule_rt,
+	.needs_post_schedule	= needs_post_schedule_rt,
 	.post_schedule		= post_schedule_rt,
 	.task_wake_up		= task_wake_up_rt,
 	.switched_from		= switched_from_rt,
diff --git a/kernel/seccomp.c b/kernel/seccomp.c
index ad64fcb..57d4b13 100644
--- a/kernel/seccomp.c
+++ b/kernel/seccomp.c
@@ -8,6 +8,7 @@
 
 #include <linux/seccomp.h>
 #include <linux/sched.h>
+#include <linux/compat.h>
 
 /* #define SECCOMP_DEBUG 1 */
 #define NR_SECCOMP_MODES 1
@@ -22,7 +23,7 @@
 	0, /* null terminated */
 };
 
-#ifdef TIF_32BIT
+#ifdef CONFIG_COMPAT
 static int mode1_syscalls_32[] = {
 	__NR_seccomp_read_32, __NR_seccomp_write_32, __NR_seccomp_exit_32, __NR_seccomp_sigreturn_32,
 	0, /* null terminated */
@@ -37,8 +38,8 @@
 	switch (mode) {
 	case 1:
 		syscall = mode1_syscalls;
-#ifdef TIF_32BIT
-		if (test_thread_flag(TIF_32BIT))
+#ifdef CONFIG_COMPAT
+		if (is_compat_task())
 			syscall = mode1_syscalls_32;
 #endif
 		do {
diff --git a/kernel/softirq.c b/kernel/softirq.c
index bdbe9de..9041ea7 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -626,6 +626,7 @@
 			preempt_enable_no_resched();
 			cond_resched();
 			preempt_disable();
+			rcu_qsctr_inc((long)__bind_cpu);
 		}
 		preempt_enable();
 		set_current_state(TASK_INTERRUPTIBLE);
diff --git a/kernel/sys.c b/kernel/sys.c
index f145c41..37f458e 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -559,7 +559,7 @@
 	abort_creds(new);
 	return retval;
 }
-  
+
 /*
  * change the user struct in a credentials set to match the new UID
  */
@@ -571,6 +571,11 @@
 	if (!new_user)
 		return -EAGAIN;
 
+	if (!task_can_switch_user(new_user, current)) {
+		free_uid(new_user);
+		return -EINVAL;
+	}
+
 	if (atomic_read(&new_user->processes) >=
 				current->signal->rlim[RLIMIT_NPROC].rlim_cur &&
 			new_user != INIT_USER) {
@@ -631,10 +636,11 @@
 			goto error;
 	}
 
-	retval = -EAGAIN;
-	if (new->uid != old->uid && set_user(new) < 0)
-		goto error;
-
+	if (new->uid != old->uid) {
+		retval = set_user(new);
+		if (retval < 0)
+			goto error;
+	}
 	if (ruid != (uid_t) -1 ||
 	    (euid != (uid_t) -1 && euid != old->uid))
 		new->suid = new->euid;
@@ -680,9 +686,10 @@
 	retval = -EPERM;
 	if (capable(CAP_SETUID)) {
 		new->suid = new->uid = uid;
-		if (uid != old->uid && set_user(new) < 0) {
-			retval = -EAGAIN;
-			goto error;
+		if (uid != old->uid) {
+			retval = set_user(new);
+			if (retval < 0)
+				goto error;
 		}
 	} else if (uid != old->uid && uid != new->suid) {
 		goto error;
@@ -734,11 +741,13 @@
 			goto error;
 	}
 
-	retval = -EAGAIN;
 	if (ruid != (uid_t) -1) {
 		new->uid = ruid;
-		if (ruid != old->uid && set_user(new) < 0)
-			goto error;
+		if (ruid != old->uid) {
+			retval = set_user(new);
+			if (retval < 0)
+				goto error;
+		}
 	}
 	if (euid != (uid_t) -1)
 		new->euid = euid;
diff --git a/kernel/tsacct.c b/kernel/tsacct.c
index 43f891b..00d59d0 100644
--- a/kernel/tsacct.c
+++ b/kernel/tsacct.c
@@ -122,8 +122,10 @@
 	if (likely(tsk->mm)) {
 		cputime_t time, dtime;
 		struct timeval value;
+		unsigned long flags;
 		u64 delta;
 
+		local_irq_save(flags);
 		time = tsk->stime + tsk->utime;
 		dtime = cputime_sub(time, tsk->acct_timexpd);
 		jiffies_to_timeval(cputime_to_jiffies(dtime), &value);
@@ -131,10 +133,12 @@
 		delta = delta * USEC_PER_SEC + value.tv_usec;
 
 		if (delta == 0)
-			return;
+			goto out;
 		tsk->acct_timexpd = time;
 		tsk->acct_rss_mem1 += delta * get_mm_rss(tsk->mm);
 		tsk->acct_vm_mem1 += delta * tsk->mm->total_vm;
+	out:
+		local_irq_restore(flags);
 	}
 }
 
diff --git a/kernel/user.c b/kernel/user.c
index 3551ac7..fbb300e 100644
--- a/kernel/user.c
+++ b/kernel/user.c
@@ -286,14 +286,12 @@
 /* work function to remove sysfs directory for a user and free up
  * corresponding structures.
  */
-static void remove_user_sysfs_dir(struct work_struct *w)
+static void cleanup_user_struct(struct work_struct *w)
 {
 	struct user_struct *up = container_of(w, struct user_struct, work);
 	unsigned long flags;
 	int remove_user = 0;
 
-	if (up->user_ns != &init_user_ns)
-		return;
 	/* Make uid_hash_remove() + sysfs_remove_file() + kobject_del()
 	 * atomic.
 	 */
@@ -312,9 +310,11 @@
 	if (!remove_user)
 		goto done;
 
-	kobject_uevent(&up->kobj, KOBJ_REMOVE);
-	kobject_del(&up->kobj);
-	kobject_put(&up->kobj);
+	if (up->user_ns == &init_user_ns) {
+		kobject_uevent(&up->kobj, KOBJ_REMOVE);
+		kobject_del(&up->kobj);
+		kobject_put(&up->kobj);
+	}
 
 	sched_destroy_user(up);
 	key_put(up->uid_keyring);
@@ -335,7 +335,7 @@
 	atomic_inc(&up->__count);
 	spin_unlock_irqrestore(&uidhash_lock, flags);
 
-	INIT_WORK(&up->work, remove_user_sysfs_dir);
+	INIT_WORK(&up->work, cleanup_user_struct);
 	schedule_work(&up->work);
 }
 
@@ -362,6 +362,24 @@
 
 #endif
 
+#if defined(CONFIG_RT_GROUP_SCHED) && defined(CONFIG_USER_SCHED)
+/*
+ * We need to check if a setuid can take place. This function should be called
+ * before successfully completing the setuid.
+ */
+int task_can_switch_user(struct user_struct *up, struct task_struct *tsk)
+{
+
+	return sched_rt_can_attach(up->tg, tsk);
+
+}
+#else
+int task_can_switch_user(struct user_struct *up, struct task_struct *tsk)
+{
+	return 1;
+}
+#endif
+
 /*
  * Locate the user_struct for the passed UID.  If found, take a ref on it.  The
  * caller must undo that ref with free_uid().
diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c
index 7908431..076c7c8 100644
--- a/kernel/user_namespace.c
+++ b/kernel/user_namespace.c
@@ -60,12 +60,25 @@
 	return 0;
 }
 
-void free_user_ns(struct kref *kref)
+/*
+ * Deferred destructor for a user namespace.  This is required because
+ * free_user_ns() may be called with uidhash_lock held, but we need to call
+ * back to free_uid() which will want to take the lock again.
+ */
+static void free_user_ns_work(struct work_struct *work)
 {
-	struct user_namespace *ns;
-
-	ns = container_of(kref, struct user_namespace, kref);
+	struct user_namespace *ns =
+		container_of(work, struct user_namespace, destroyer);
 	free_uid(ns->creator);
 	kfree(ns);
 }
+
+void free_user_ns(struct kref *kref)
+{
+	struct user_namespace *ns =
+		container_of(kref, struct user_namespace, kref);
+
+	INIT_WORK(&ns->destroyer, free_user_ns_work);
+	schedule_work(&ns->destroyer);
+}
 EXPORT_SYMBOL(free_user_ns);
diff --git a/lib/Kconfig b/lib/Kconfig
index 03c2c24..fc8ea1c 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -136,12 +136,6 @@
 config TEXTSEARCH_FSM
 	tristate
 
-#
-# plist support is select#ed if needed
-#
-config PLIST
-	boolean
-
 config HAS_IOMEM
 	boolean
 	depends on !NO_IOMEM
diff --git a/lib/Makefile b/lib/Makefile
index 32b0e64..902d738 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -11,7 +11,8 @@
 	 rbtree.o radix-tree.o dump_stack.o \
 	 idr.o int_sqrt.o extable.o prio_tree.o \
 	 sha1.o irq_regs.o reciprocal_div.o argv_split.o \
-	 proportions.o prio_heap.o ratelimit.o show_mem.o is_single_threaded.o
+	 proportions.o prio_heap.o ratelimit.o show_mem.o \
+	 is_single_threaded.o plist.o
 
 lib-$(CONFIG_MMU) += ioremap.o
 lib-$(CONFIG_SMP) += cpumask.o
@@ -40,7 +41,6 @@
 lib-$(CONFIG_GENERIC_FIND_LAST_BIT) += find_last_bit.o
 obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
 obj-$(CONFIG_LOCK_KERNEL) += kernel_lock.o
-obj-$(CONFIG_PLIST) += plist.o
 obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o
 obj-$(CONFIG_DEBUG_LIST) += list_debug.o
 obj-$(CONFIG_DEBUG_OBJECTS) += debugobjects.o
diff --git a/lib/idr.c b/lib/idr.c
index c11c576..dab4bca 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -449,6 +449,7 @@
 
 	n = idp->layers * IDR_BITS;
 	p = idp->top;
+	rcu_assign_pointer(idp->top, NULL);
 	max = 1 << n;
 
 	id = 0;
@@ -467,7 +468,6 @@
 			p = *--paa;
 		}
 	}
-	rcu_assign_pointer(idp->top, NULL);
 	idp->layers = 0;
 }
 EXPORT_SYMBOL(idr_remove_all);
diff --git a/lib/kernel_lock.c b/lib/kernel_lock.c
index 01a3c22..39f1029 100644
--- a/lib/kernel_lock.c
+++ b/lib/kernel_lock.c
@@ -39,7 +39,7 @@
 int __lockfunc __reacquire_kernel_lock(void)
 {
 	while (!_raw_spin_trylock(&kernel_flag)) {
-		if (test_thread_flag(TIF_NEED_RESCHED))
+		if (need_resched())
 			return -EAGAIN;
 		cpu_relax();
 	}
diff --git a/mm/shmem.c b/mm/shmem.c
index 19d566c..4103a23 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -169,13 +169,13 @@
  */
 static inline int shmem_acct_size(unsigned long flags, loff_t size)
 {
-	return (flags & VM_ACCOUNT) ?
-		security_vm_enough_memory_kern(VM_ACCT(size)) : 0;
+	return (flags & VM_NORESERVE) ?
+		0 : security_vm_enough_memory_kern(VM_ACCT(size));
 }
 
 static inline void shmem_unacct_size(unsigned long flags, loff_t size)
 {
-	if (flags & VM_ACCOUNT)
+	if (!(flags & VM_NORESERVE))
 		vm_unacct_memory(VM_ACCT(size));
 }
 
@@ -187,13 +187,13 @@
  */
 static inline int shmem_acct_block(unsigned long flags)
 {
-	return (flags & VM_ACCOUNT) ?
-		0 : security_vm_enough_memory_kern(VM_ACCT(PAGE_CACHE_SIZE));
+	return (flags & VM_NORESERVE) ?
+		security_vm_enough_memory_kern(VM_ACCT(PAGE_CACHE_SIZE)) : 0;
 }
 
 static inline void shmem_unacct_blocks(unsigned long flags, long pages)
 {
-	if (!(flags & VM_ACCOUNT))
+	if (flags & VM_NORESERVE)
 		vm_unacct_memory(pages * VM_ACCT(PAGE_CACHE_SIZE));
 }
 
@@ -1515,8 +1515,8 @@
 	return 0;
 }
 
-static struct inode *
-shmem_get_inode(struct super_block *sb, int mode, dev_t dev)
+static struct inode *shmem_get_inode(struct super_block *sb, int mode,
+					dev_t dev, unsigned long flags)
 {
 	struct inode *inode;
 	struct shmem_inode_info *info;
@@ -1537,6 +1537,7 @@
 		info = SHMEM_I(inode);
 		memset(info, 0, (char *)inode - (char *)info);
 		spin_lock_init(&info->lock);
+		info->flags = flags & VM_NORESERVE;
 		INIT_LIST_HEAD(&info->swaplist);
 
 		switch (mode & S_IFMT) {
@@ -1779,9 +1780,10 @@
 static int
 shmem_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev)
 {
-	struct inode *inode = shmem_get_inode(dir->i_sb, mode, dev);
+	struct inode *inode;
 	int error = -ENOSPC;
 
+	inode = shmem_get_inode(dir->i_sb, mode, dev, VM_NORESERVE);
 	if (inode) {
 		error = security_inode_init_security(inode, dir, NULL, NULL,
 						     NULL);
@@ -1920,7 +1922,7 @@
 	if (len > PAGE_CACHE_SIZE)
 		return -ENAMETOOLONG;
 
-	inode = shmem_get_inode(dir->i_sb, S_IFLNK|S_IRWXUGO, 0);
+	inode = shmem_get_inode(dir->i_sb, S_IFLNK|S_IRWXUGO, 0, VM_NORESERVE);
 	if (!inode)
 		return -ENOSPC;
 
@@ -2332,7 +2334,7 @@
 	sb->s_flags |= MS_POSIXACL;
 #endif
 
-	inode = shmem_get_inode(sb, S_IFDIR | sbinfo->mode, 0);
+	inode = shmem_get_inode(sb, S_IFDIR | sbinfo->mode, 0, VM_NORESERVE);
 	if (!inode)
 		goto failed;
 	inode->i_uid = sbinfo->uid;
@@ -2574,12 +2576,12 @@
 	return 0;
 }
 
-#define shmem_file_operations ramfs_file_operations
-#define shmem_vm_ops generic_file_vm_ops
-#define shmem_get_inode ramfs_get_inode
-#define shmem_acct_size(a, b) 0
-#define shmem_unacct_size(a, b) do {} while (0)
-#define SHMEM_MAX_BYTES LLONG_MAX
+#define shmem_vm_ops				generic_file_vm_ops
+#define shmem_file_operations			ramfs_file_operations
+#define shmem_get_inode(sb, mode, dev, flags)	ramfs_get_inode(sb, mode, dev)
+#define shmem_acct_size(flags, size)		0
+#define shmem_unacct_size(flags, size)		do {} while (0)
+#define SHMEM_MAX_BYTES				LLONG_MAX
 
 #endif /* CONFIG_SHMEM */
 
@@ -2589,7 +2591,7 @@
  * shmem_file_setup - get an unlinked file living in tmpfs
  * @name: name for dentry (to be seen in /proc/<pid>/maps
  * @size: size to be set for the file
- * @flags: vm_flags
+ * @flags: VM_NORESERVE suppresses pre-accounting of the entire object size
  */
 struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags)
 {
@@ -2623,13 +2625,10 @@
 		goto put_dentry;
 
 	error = -ENOSPC;
-	inode = shmem_get_inode(root->d_sb, S_IFREG | S_IRWXUGO, 0);
+	inode = shmem_get_inode(root->d_sb, S_IFREG | S_IRWXUGO, 0, flags);
 	if (!inode)
 		goto close_file;
 
-#ifdef CONFIG_SHMEM
-	SHMEM_I(inode)->flags = (flags & VM_NORESERVE) ? 0 : VM_ACCOUNT;
-#endif
 	d_instantiate(dentry, inode);
 	inode->i_size = size;
 	inode->i_nlink = 0;	/* It is unlinked */
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 903cad4..520a759 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -323,6 +323,7 @@
 	unsigned long addr;
 	int purged = 0;
 
+	BUG_ON(!size);
 	BUG_ON(size & ~PAGE_MASK);
 
 	va = kmalloc_node(sizeof(struct vmap_area),
@@ -334,6 +335,9 @@
 	addr = ALIGN(vstart, align);
 
 	spin_lock(&vmap_area_lock);
+	if (addr + size - 1 < addr)
+		goto overflow;
+
 	/* XXX: could have a last_hole cache */
 	n = vmap_area_root.rb_node;
 	if (n) {
@@ -365,6 +369,8 @@
 
 		while (addr + size > first->va_start && addr + size <= vend) {
 			addr = ALIGN(first->va_end + PAGE_SIZE, align);
+			if (addr + size - 1 < addr)
+				goto overflow;
 
 			n = rb_next(&first->rb_node);
 			if (n)
@@ -375,6 +381,7 @@
 	}
 found:
 	if (addr + size > vend) {
+overflow:
 		spin_unlock(&vmap_area_lock);
 		if (!purged) {
 			purge_vmap_area_lazy();
@@ -498,6 +505,7 @@
 	static DEFINE_SPINLOCK(purge_lock);
 	LIST_HEAD(valist);
 	struct vmap_area *va;
+	struct vmap_area *n_va;
 	int nr = 0;
 
 	/*
@@ -537,7 +545,7 @@
 
 	if (nr) {
 		spin_lock(&vmap_area_lock);
-		list_for_each_entry(va, &valist, purge_list)
+		list_for_each_entry_safe(va, n_va, &valist, purge_list)
 			__free_vmap_area(va);
 		spin_unlock(&vmap_area_lock);
 	}
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 6177e3b..e895171 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1469,7 +1469,7 @@
 		int file = is_file_lru(l);
 		int scan;
 
-		scan = zone_page_state(zone, NR_LRU_BASE + l);
+		scan = zone_nr_pages(zone, sc, l);
 		if (priority) {
 			scan >>= priority;
 			scan = (scan * percent[file]) / 100;
diff --git a/net/802/tr.c b/net/802/tr.c
index 158150f..f47ae28 100644
--- a/net/802/tr.c
+++ b/net/802/tr.c
@@ -668,3 +668,5 @@
 
 EXPORT_SYMBOL(tr_type_trans);
 EXPORT_SYMBOL(alloc_trdev);
+
+MODULE_LICENSE("GPL");
diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index e9db889..2886d2f 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -1,12 +1,16 @@
 #include <linux/skbuff.h>
 #include <linux/netdevice.h>
 #include <linux/if_vlan.h>
+#include <linux/netpoll.h>
 #include "vlan.h"
 
 /* VLAN rx hw acceleration helper.  This acts like netif_{rx,receive_skb}(). */
 int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp,
 		      u16 vlan_tci, int polling)
 {
+	if (netpoll_rx(skb))
+		return NET_RX_DROP;
+
 	if (skb_bond_should_drop(skb))
 		goto drop;
 
@@ -100,6 +104,9 @@
 {
 	int err = NET_RX_SUCCESS;
 
+	if (netpoll_receive_skb(skb))
+		return NET_RX_DROP;
+
 	switch (vlan_gro_common(napi, grp, vlan_tci, skb)) {
 	case -1:
 		return netif_receive_skb(skb);
@@ -126,6 +133,9 @@
 	if (!skb)
 		goto out;
 
+	if (netpoll_receive_skb(skb))
+		goto out;
+
 	err = NET_RX_SUCCESS;
 
 	switch (vlan_gro_common(napi, grp, vlan_tci, skb)) {
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index 4a19acd..1b34135 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -553,7 +553,7 @@
 	int err = 0;
 
 	if (netif_device_present(real_dev) && ops->ndo_neigh_setup)
-		err = ops->ndo_neigh_setup(dev, pa);
+		err = ops->ndo_neigh_setup(real_dev, pa);
 
 	return err;
 }
@@ -639,6 +639,7 @@
 		dev->hard_header_len = real_dev->hard_header_len + VLAN_HLEN;
 		dev->netdev_ops         = &vlan_netdev_ops;
 	}
+	netdev_resync_ops(dev);
 
 	if (is_vlan_dev(real_dev))
 		subclass = 1;
diff --git a/net/core/dev.c b/net/core/dev.c
index a17e006..f112970 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2267,12 +2267,6 @@
 
 	rcu_read_lock();
 
-	/* Don't receive packets in an exiting network namespace */
-	if (!net_alive(dev_net(skb->dev))) {
-		kfree_skb(skb);
-		goto out;
-	}
-
 #ifdef CONFIG_NET_CLS_ACT
 	if (skb->tc_verd & TC_NCLS) {
 		skb->tc_verd = CLR_TC_NCLS(skb->tc_verd);
@@ -2488,6 +2482,9 @@
 
 int napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
 {
+	if (netpoll_receive_skb(skb))
+		return NET_RX_DROP;
+
 	switch (__napi_gro_receive(napi, skb)) {
 	case -1:
 		return netif_receive_skb(skb);
@@ -2558,6 +2555,9 @@
 	if (!skb)
 		goto out;
 
+	if (netpoll_receive_skb(skb))
+		goto out;
+
 	err = NET_RX_SUCCESS;
 
 	switch (__napi_gro_receive(napi, skb)) {
@@ -4282,6 +4282,39 @@
 }
 EXPORT_SYMBOL(netdev_fix_features);
 
+/* Some devices need to (re-)set their netdev_ops inside
+ * ->init() or similar.  If that happens, we have to setup
+ * the compat pointers again.
+ */
+void netdev_resync_ops(struct net_device *dev)
+{
+#ifdef CONFIG_COMPAT_NET_DEV_OPS
+	const struct net_device_ops *ops = dev->netdev_ops;
+
+	dev->init = ops->ndo_init;
+	dev->uninit = ops->ndo_uninit;
+	dev->open = ops->ndo_open;
+	dev->change_rx_flags = ops->ndo_change_rx_flags;
+	dev->set_rx_mode = ops->ndo_set_rx_mode;
+	dev->set_multicast_list = ops->ndo_set_multicast_list;
+	dev->set_mac_address = ops->ndo_set_mac_address;
+	dev->validate_addr = ops->ndo_validate_addr;
+	dev->do_ioctl = ops->ndo_do_ioctl;
+	dev->set_config = ops->ndo_set_config;
+	dev->change_mtu = ops->ndo_change_mtu;
+	dev->neigh_setup = ops->ndo_neigh_setup;
+	dev->tx_timeout = ops->ndo_tx_timeout;
+	dev->get_stats = ops->ndo_get_stats;
+	dev->vlan_rx_register = ops->ndo_vlan_rx_register;
+	dev->vlan_rx_add_vid = ops->ndo_vlan_rx_add_vid;
+	dev->vlan_rx_kill_vid = ops->ndo_vlan_rx_kill_vid;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	dev->poll_controller = ops->ndo_poll_controller;
+#endif
+#endif
+}
+EXPORT_SYMBOL(netdev_resync_ops);
+
 /**
  *	register_netdevice	- register a network device
  *	@dev: device to register
@@ -4326,27 +4359,7 @@
 	 * This is temporary until all network devices are converted.
 	 */
 	if (dev->netdev_ops) {
-		const struct net_device_ops *ops = dev->netdev_ops;
-
-		dev->init = ops->ndo_init;
-		dev->uninit = ops->ndo_uninit;
-		dev->open = ops->ndo_open;
-		dev->change_rx_flags = ops->ndo_change_rx_flags;
-		dev->set_rx_mode = ops->ndo_set_rx_mode;
-		dev->set_multicast_list = ops->ndo_set_multicast_list;
-		dev->set_mac_address = ops->ndo_set_mac_address;
-		dev->validate_addr = ops->ndo_validate_addr;
-		dev->do_ioctl = ops->ndo_do_ioctl;
-		dev->set_config = ops->ndo_set_config;
-		dev->change_mtu = ops->ndo_change_mtu;
-		dev->tx_timeout = ops->ndo_tx_timeout;
-		dev->get_stats = ops->ndo_get_stats;
-		dev->vlan_rx_register = ops->ndo_vlan_rx_register;
-		dev->vlan_rx_add_vid = ops->ndo_vlan_rx_add_vid;
-		dev->vlan_rx_kill_vid = ops->ndo_vlan_rx_kill_vid;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-		dev->poll_controller = ops->ndo_poll_controller;
-#endif
+		netdev_resync_ops(dev);
 	} else {
 		char drivername[64];
 		pr_info("%s (%s): not using net_device_ops yet\n",
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 6ac29a4..484f587 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -77,7 +77,9 @@
 	if (endp == buf)
 		goto err;
 
-	rtnl_lock();
+	if (!rtnl_trylock())
+		return -ERESTARTSYS;
+
 	if (dev_isalive(net)) {
 		if ((ret = (*set)(net, new)) == 0)
 			ret = len;
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 2adb1a7..e3bebd3 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -157,9 +157,6 @@
 	struct pernet_operations *ops;
 	struct net *net;
 
-	/* Be very certain incoming network packets will not find us */
-	rcu_barrier();
-
 	net = container_of(work, struct net, work);
 
 	mutex_lock(&net_mutex);
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 705b33b..fc562d2 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -1205,7 +1205,7 @@
 
 int __init icmp_init(void)
 {
-	return register_pernet_device(&icmp_sk_ops);
+	return register_pernet_subsys(&icmp_sk_ops);
 }
 
 EXPORT_SYMBOL(icmp_err_convert);
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index a6961d7..c28976a7 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1374,7 +1374,8 @@
 
 static int tcp_shifted_skb(struct sock *sk, struct sk_buff *skb,
 			   struct tcp_sacktag_state *state,
-			   unsigned int pcount, int shifted, int mss)
+			   unsigned int pcount, int shifted, int mss,
+			   int dup_sack)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 	struct sk_buff *prev = tcp_write_queue_prev(sk, skb);
@@ -1410,7 +1411,7 @@
 	}
 
 	/* We discard results */
-	tcp_sacktag_one(skb, sk, state, 0, pcount);
+	tcp_sacktag_one(skb, sk, state, dup_sack, pcount);
 
 	/* Difference in this won't matter, both ACKed by the same cumul. ACK */
 	TCP_SKB_CB(prev)->sacked |= (TCP_SKB_CB(skb)->sacked & TCPCB_EVER_RETRANS);
@@ -1561,7 +1562,7 @@
 
 	if (!skb_shift(prev, skb, len))
 		goto fallback;
-	if (!tcp_shifted_skb(sk, skb, state, pcount, len, mss))
+	if (!tcp_shifted_skb(sk, skb, state, pcount, len, mss, dup_sack))
 		goto out;
 
 	/* Hole filled allows collapsing with the next as well, this is very
@@ -1580,7 +1581,7 @@
 	len = skb->len;
 	if (skb_shift(prev, skb, len)) {
 		pcount += tcp_skb_pcount(skb);
-		tcp_shifted_skb(sk, skb, state, tcp_skb_pcount(skb), len, mss);
+		tcp_shifted_skb(sk, skb, state, tcp_skb_pcount(skb), len, mss, 0);
 	}
 
 out:
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 19d7b42..cf74c41 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -2443,7 +2443,7 @@
 void __init tcp_v4_init(void)
 {
 	inet_hashinfo_init(&tcp_hashinfo);
-	if (register_pernet_device(&tcp_sk_ops))
+	if (register_pernet_subsys(&tcp_sk_ops))
 		panic("Failed to create the TCP control socket.\n");
 }
 
diff --git a/net/ipv4/tcp_scalable.c b/net/ipv4/tcp_scalable.c
index 2747ec7..4660b08 100644
--- a/net/ipv4/tcp_scalable.c
+++ b/net/ipv4/tcp_scalable.c
@@ -1,6 +1,6 @@
 /* Tom Kelly's Scalable TCP
  *
- * See htt://www-lce.eng.cam.ac.uk/~ctk21/scalable/
+ * See http://www.deneholme.net/tom/scalable/
  *
  * John Heffner <jheffner@sc.edu>
  */
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index f9afb45..1220e2c 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -493,15 +493,17 @@
 	read_unlock(&dev_base_lock);
 }
 
-static void addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
+static int addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
 {
 	struct net *net;
 
 	net = (struct net *)table->extra2;
 	if (p == &net->ipv6.devconf_dflt->forwarding)
-		return;
+		return 0;
 
-	rtnl_lock();
+	if (!rtnl_trylock())
+		return -ERESTARTSYS;
+
 	if (p == &net->ipv6.devconf_all->forwarding) {
 		__s32 newf = net->ipv6.devconf_all->forwarding;
 		net->ipv6.devconf_dflt->forwarding = newf;
@@ -512,6 +514,7 @@
 
 	if (*p)
 		rt6_purge_dflt_routers(net);
+	return 1;
 }
 #endif
 
@@ -2608,9 +2611,6 @@
 
 	ASSERT_RTNL();
 
-	if ((dev->flags & IFF_LOOPBACK) && how == 1)
-		how = 0;
-
 	rt6_ifdown(net, dev);
 	neigh_ifdown(&nd_tbl, dev);
 
@@ -3983,7 +3983,7 @@
 	ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
 
 	if (write)
-		addrconf_fixup_forwarding(ctl, valp, val);
+		ret = addrconf_fixup_forwarding(ctl, valp, val);
 	return ret;
 }
 
@@ -4019,8 +4019,7 @@
 	}
 
 	*valp = new;
-	addrconf_fixup_forwarding(table, valp, val);
-	return 1;
+	return addrconf_fixup_forwarding(table, valp, val);
 }
 
 static struct addrconf_sysctl_table
@@ -4446,25 +4445,6 @@
 
 EXPORT_SYMBOL(unregister_inet6addr_notifier);
 
-static void addrconf_net_exit(struct net *net)
-{
-	struct net_device *dev;
-
-	rtnl_lock();
-	/* clean dev list */
-	for_each_netdev(net, dev) {
-		if (__in6_dev_get(dev) == NULL)
-			continue;
-		addrconf_ifdown(dev, 1);
-	}
-	addrconf_ifdown(net->loopback_dev, 2);
-	rtnl_unlock();
-}
-
-static struct pernet_operations addrconf_net_ops = {
-	.exit = addrconf_net_exit,
-};
-
 /*
  *	Init / cleanup code
  */
@@ -4506,10 +4486,6 @@
 	if (err)
 		goto errlo;
 
-	err = register_pernet_device(&addrconf_net_ops);
-	if (err)
-		return err;
-
 	register_netdevice_notifier(&ipv6_dev_notf);
 
 	addrconf_verify(0);
@@ -4539,15 +4515,22 @@
 void addrconf_cleanup(void)
 {
 	struct inet6_ifaddr *ifa;
+	struct net_device *dev;
 	int i;
 
 	unregister_netdevice_notifier(&ipv6_dev_notf);
-	unregister_pernet_device(&addrconf_net_ops);
-
 	unregister_pernet_subsys(&addrconf_ops);
 
 	rtnl_lock();
 
+	/* clean dev list */
+	for_each_netdev(&init_net, dev) {
+		if (__in6_dev_get(dev) == NULL)
+			continue;
+		addrconf_ifdown(dev, 1);
+	}
+	addrconf_ifdown(init_net.loopback_dev, 2);
+
 	/*
 	 *	Check hash table.
 	 */
@@ -4568,6 +4551,4 @@
 
 	del_timer(&addr_chk_timer);
 	rtnl_unlock();
-
-	unregister_pernet_subsys(&addrconf_net_ops);
 }
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index c802bc1..da944ec 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -72,6 +72,10 @@
 static struct list_head inetsw6[SOCK_MAX];
 static DEFINE_SPINLOCK(inetsw6_lock);
 
+static int disable_ipv6 = 0;
+module_param_named(disable, disable_ipv6, int, 0);
+MODULE_PARM_DESC(disable, "Disable IPv6 such that it is non-functional");
+
 static __inline__ struct ipv6_pinfo *inet6_sk_generic(struct sock *sk)
 {
 	const int offset = sk->sk_prot->obj_size - sizeof(struct ipv6_pinfo);
@@ -991,10 +995,21 @@
 {
 	struct sk_buff *dummy_skb;
 	struct list_head *r;
-	int err;
+	int err = 0;
 
 	BUILD_BUG_ON(sizeof(struct inet6_skb_parm) > sizeof(dummy_skb->cb));
 
+	/* Register the socket-side information for inet6_create.  */
+	for(r = &inetsw6[0]; r < &inetsw6[SOCK_MAX]; ++r)
+		INIT_LIST_HEAD(r);
+
+	if (disable_ipv6) {
+		printk(KERN_INFO
+		       "IPv6: Loaded, but administratively disabled, "
+		       "reboot required to enable\n");
+		goto out;
+	}
+
 	err = proto_register(&tcpv6_prot, 1);
 	if (err)
 		goto out;
@@ -1012,10 +1027,6 @@
 		goto out_unregister_udplite_proto;
 
 
-	/* Register the socket-side information for inet6_create.  */
-	for(r = &inetsw6[0]; r < &inetsw6[SOCK_MAX]; ++r)
-		INIT_LIST_HEAD(r);
-
 	/* We MUST register RAW sockets before we create the ICMP6,
 	 * IGMP6, or NDISC control sockets.
 	 */
diff --git a/net/ipv6/inet6_hashtables.c b/net/ipv6/inet6_hashtables.c
index 8fe267f..1bcc343 100644
--- a/net/ipv6/inet6_hashtables.c
+++ b/net/ipv6/inet6_hashtables.c
@@ -258,11 +258,11 @@
 
 	if (twp != NULL) {
 		*twp = tw;
-		NET_INC_STATS_BH(twsk_net(tw), LINUX_MIB_TIMEWAITRECYCLED);
+		NET_INC_STATS_BH(net, LINUX_MIB_TIMEWAITRECYCLED);
 	} else if (tw != NULL) {
 		/* Silly. Should hash-dance instead... */
 		inet_twsk_deschedule(tw, death_row);
-		NET_INC_STATS_BH(twsk_net(tw), LINUX_MIB_TIMEWAITRECYCLED);
+		NET_INC_STATS_BH(net, LINUX_MIB_TIMEWAITRECYCLED);
 
 		inet_twsk_put(tw);
 	}
diff --git a/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c b/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
index c323643..72dbb6d 100644
--- a/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
+++ b/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
@@ -201,8 +201,9 @@
 
 	if (net->ct.sysctl_checksum && hooknum == NF_INET_PRE_ROUTING &&
 	    nf_ip6_checksum(skb, hooknum, dataoff, IPPROTO_ICMPV6)) {
-		nf_log_packet(PF_INET6, 0, skb, NULL, NULL, NULL,
-			      "nf_ct_icmpv6: ICMPv6 checksum failed\n");
+		if (LOG_INVALID(net, IPPROTO_ICMPV6))
+			nf_log_packet(PF_INET6, 0, skb, NULL, NULL, NULL,
+				      "nf_ct_icmpv6: ICMPv6 checksum failed ");
 		return -NF_ACCEPT;
 	}
 
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index fa49dc7..c712e9f 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -39,7 +39,7 @@
 #endif
 
 #define NFULNL_NLBUFSIZ_DEFAULT	NLMSG_GOODSIZE
-#define NFULNL_TIMEOUT_DEFAULT 	HZ	/* every second */
+#define NFULNL_TIMEOUT_DEFAULT 	100	/* every second */
 #define NFULNL_QTHRESH_DEFAULT 	100	/* 100 packets */
 #define NFULNL_COPY_RANGE_MAX	0xFFFF	/* max packet size is limited by 16-bit struct nfattr nfa_len field */
 
@@ -590,8 +590,10 @@
 
 	qthreshold = inst->qthreshold;
 	/* per-rule qthreshold overrides per-instance */
-	if (qthreshold > li->u.ulog.qthreshold)
-		qthreshold = li->u.ulog.qthreshold;
+	if (li->u.ulog.qthreshold)
+		if (qthreshold > li->u.ulog.qthreshold)
+			qthreshold = li->u.ulog.qthreshold;
+
 
 	switch (inst->copy_mode) {
 	case NFULNL_COPY_META:
diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c
index bfbf521..5baccfa 100644
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -827,59 +827,143 @@
 	.release = seq_release_net,
 };
 
+/*
+ * Traverse state for ip{,6}_{tables,matches} for helping crossing
+ * the multi-AF mutexes.
+ */
+struct nf_mttg_trav {
+	struct list_head *head, *curr;
+	uint8_t class, nfproto;
+};
+
+enum {
+	MTTG_TRAV_INIT,
+	MTTG_TRAV_NFP_UNSPEC,
+	MTTG_TRAV_NFP_SPEC,
+	MTTG_TRAV_DONE,
+};
+
+static void *xt_mttg_seq_next(struct seq_file *seq, void *v, loff_t *ppos,
+    bool is_target)
+{
+	static const uint8_t next_class[] = {
+		[MTTG_TRAV_NFP_UNSPEC] = MTTG_TRAV_NFP_SPEC,
+		[MTTG_TRAV_NFP_SPEC]   = MTTG_TRAV_DONE,
+	};
+	struct nf_mttg_trav *trav = seq->private;
+
+	switch (trav->class) {
+	case MTTG_TRAV_INIT:
+		trav->class = MTTG_TRAV_NFP_UNSPEC;
+		mutex_lock(&xt[NFPROTO_UNSPEC].mutex);
+		trav->head = trav->curr = is_target ?
+			&xt[NFPROTO_UNSPEC].target : &xt[NFPROTO_UNSPEC].match;
+ 		break;
+	case MTTG_TRAV_NFP_UNSPEC:
+		trav->curr = trav->curr->next;
+		if (trav->curr != trav->head)
+			break;
+		mutex_unlock(&xt[NFPROTO_UNSPEC].mutex);
+		mutex_lock(&xt[trav->nfproto].mutex);
+		trav->head = trav->curr = is_target ?
+			&xt[trav->nfproto].target : &xt[trav->nfproto].match;
+		trav->class = next_class[trav->class];
+		break;
+	case MTTG_TRAV_NFP_SPEC:
+		trav->curr = trav->curr->next;
+		if (trav->curr != trav->head)
+			break;
+		/* fallthru, _stop will unlock */
+	default:
+		return NULL;
+	}
+
+	if (ppos != NULL)
+		++*ppos;
+	return trav;
+}
+
+static void *xt_mttg_seq_start(struct seq_file *seq, loff_t *pos,
+    bool is_target)
+{
+	struct nf_mttg_trav *trav = seq->private;
+	unsigned int j;
+
+	trav->class = MTTG_TRAV_INIT;
+	for (j = 0; j < *pos; ++j)
+		if (xt_mttg_seq_next(seq, NULL, NULL, is_target) == NULL)
+			return NULL;
+	return trav;
+}
+
+static void xt_mttg_seq_stop(struct seq_file *seq, void *v)
+{
+	struct nf_mttg_trav *trav = seq->private;
+
+	switch (trav->class) {
+	case MTTG_TRAV_NFP_UNSPEC:
+		mutex_unlock(&xt[NFPROTO_UNSPEC].mutex);
+		break;
+	case MTTG_TRAV_NFP_SPEC:
+		mutex_unlock(&xt[trav->nfproto].mutex);
+		break;
+	}
+}
+
 static void *xt_match_seq_start(struct seq_file *seq, loff_t *pos)
 {
-	struct proc_dir_entry *pde = (struct proc_dir_entry *)seq->private;
-	u_int16_t af = (unsigned long)pde->data;
-
-	mutex_lock(&xt[af].mutex);
-	return seq_list_start(&xt[af].match, *pos);
+	return xt_mttg_seq_start(seq, pos, false);
 }
 
-static void *xt_match_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+static void *xt_match_seq_next(struct seq_file *seq, void *v, loff_t *ppos)
 {
-	struct proc_dir_entry *pde = (struct proc_dir_entry *)seq->private;
-	u_int16_t af = (unsigned long)pde->data;
-
-	return seq_list_next(v, &xt[af].match, pos);
-}
-
-static void xt_match_seq_stop(struct seq_file *seq, void *v)
-{
-	struct proc_dir_entry *pde = seq->private;
-	u_int16_t af = (unsigned long)pde->data;
-
-	mutex_unlock(&xt[af].mutex);
+	return xt_mttg_seq_next(seq, v, ppos, false);
 }
 
 static int xt_match_seq_show(struct seq_file *seq, void *v)
 {
-	struct xt_match *match = list_entry(v, struct xt_match, list);
+	const struct nf_mttg_trav *trav = seq->private;
+	const struct xt_match *match;
 
-	if (strlen(match->name))
-		return seq_printf(seq, "%s\n", match->name);
-	else
-		return 0;
+	switch (trav->class) {
+	case MTTG_TRAV_NFP_UNSPEC:
+	case MTTG_TRAV_NFP_SPEC:
+		if (trav->curr == trav->head)
+			return 0;
+		match = list_entry(trav->curr, struct xt_match, list);
+		return (*match->name == '\0') ? 0 :
+		       seq_printf(seq, "%s\n", match->name);
+	}
+	return 0;
 }
 
 static const struct seq_operations xt_match_seq_ops = {
 	.start	= xt_match_seq_start,
 	.next	= xt_match_seq_next,
-	.stop	= xt_match_seq_stop,
+	.stop	= xt_mttg_seq_stop,
 	.show	= xt_match_seq_show,
 };
 
 static int xt_match_open(struct inode *inode, struct file *file)
 {
+	struct seq_file *seq;
+	struct nf_mttg_trav *trav;
 	int ret;
 
-	ret = seq_open(file, &xt_match_seq_ops);
-	if (!ret) {
-		struct seq_file *seq = file->private_data;
+	trav = kmalloc(sizeof(*trav), GFP_KERNEL);
+	if (trav == NULL)
+		return -ENOMEM;
 
-		seq->private = PDE(inode);
+	ret = seq_open(file, &xt_match_seq_ops);
+	if (ret < 0) {
+		kfree(trav);
+		return ret;
 	}
-	return ret;
+
+	seq = file->private_data;
+	seq->private = trav;
+	trav->nfproto = (unsigned long)PDE(inode)->data;
+	return 0;
 }
 
 static const struct file_operations xt_match_ops = {
@@ -887,62 +971,63 @@
 	.open	 = xt_match_open,
 	.read	 = seq_read,
 	.llseek	 = seq_lseek,
-	.release = seq_release,
+	.release = seq_release_private,
 };
 
 static void *xt_target_seq_start(struct seq_file *seq, loff_t *pos)
 {
-	struct proc_dir_entry *pde = (struct proc_dir_entry *)seq->private;
-	u_int16_t af = (unsigned long)pde->data;
-
-	mutex_lock(&xt[af].mutex);
-	return seq_list_start(&xt[af].target, *pos);
+	return xt_mttg_seq_start(seq, pos, true);
 }
 
-static void *xt_target_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+static void *xt_target_seq_next(struct seq_file *seq, void *v, loff_t *ppos)
 {
-	struct proc_dir_entry *pde = (struct proc_dir_entry *)seq->private;
-	u_int16_t af = (unsigned long)pde->data;
-
-	return seq_list_next(v, &xt[af].target, pos);
-}
-
-static void xt_target_seq_stop(struct seq_file *seq, void *v)
-{
-	struct proc_dir_entry *pde = seq->private;
-	u_int16_t af = (unsigned long)pde->data;
-
-	mutex_unlock(&xt[af].mutex);
+	return xt_mttg_seq_next(seq, v, ppos, true);
 }
 
 static int xt_target_seq_show(struct seq_file *seq, void *v)
 {
-	struct xt_target *target = list_entry(v, struct xt_target, list);
+	const struct nf_mttg_trav *trav = seq->private;
+	const struct xt_target *target;
 
-	if (strlen(target->name))
-		return seq_printf(seq, "%s\n", target->name);
-	else
-		return 0;
+	switch (trav->class) {
+	case MTTG_TRAV_NFP_UNSPEC:
+	case MTTG_TRAV_NFP_SPEC:
+		if (trav->curr == trav->head)
+			return 0;
+		target = list_entry(trav->curr, struct xt_target, list);
+		return (*target->name == '\0') ? 0 :
+		       seq_printf(seq, "%s\n", target->name);
+	}
+	return 0;
 }
 
 static const struct seq_operations xt_target_seq_ops = {
 	.start	= xt_target_seq_start,
 	.next	= xt_target_seq_next,
-	.stop	= xt_target_seq_stop,
+	.stop	= xt_mttg_seq_stop,
 	.show	= xt_target_seq_show,
 };
 
 static int xt_target_open(struct inode *inode, struct file *file)
 {
+	struct seq_file *seq;
+	struct nf_mttg_trav *trav;
 	int ret;
 
-	ret = seq_open(file, &xt_target_seq_ops);
-	if (!ret) {
-		struct seq_file *seq = file->private_data;
+	trav = kmalloc(sizeof(*trav), GFP_KERNEL);
+	if (trav == NULL)
+		return -ENOMEM;
 
-		seq->private = PDE(inode);
+	ret = seq_open(file, &xt_target_seq_ops);
+	if (ret < 0) {
+		kfree(trav);
+		return ret;
 	}
-	return ret;
+
+	seq = file->private_data;
+	seq->private = trav;
+	trav->nfproto = (unsigned long)PDE(inode)->data;
+	return 0;
 }
 
 static const struct file_operations xt_target_ops = {
@@ -950,7 +1035,7 @@
 	.open	 = xt_target_open,
 	.read	 = seq_read,
 	.llseek	 = seq_lseek,
-	.release = seq_release,
+	.release = seq_release_private,
 };
 
 #define FORMAT_TABLES	"_tables_names"
diff --git a/net/netfilter/xt_recent.c b/net/netfilter/xt_recent.c
index fe80b61..791e030 100644
--- a/net/netfilter/xt_recent.c
+++ b/net/netfilter/xt_recent.c
@@ -542,7 +542,7 @@
 	struct recent_entry *e;
 	char buf[sizeof("+b335:1d35:1e55:dead:c0de:1715:5afe:c0de")];
 	const char *c = buf;
-	union nf_inet_addr addr;
+	union nf_inet_addr addr = {};
 	u_int16_t family;
 	bool add, succ;
 
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 9eb895c..3ae3cb8 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1084,6 +1084,13 @@
 	return 0;
 }
 
+/**
+ * netlink_set_err - report error to broadcast listeners
+ * @ssk: the kernel netlink socket, as returned by netlink_kernel_create()
+ * @pid: the PID of a process that we want to skip (if any)
+ * @groups: the broadcast group that will notice the error
+ * @code: error code, must be negative (as usual in kernelspace)
+ */
 void netlink_set_err(struct sock *ssk, u32 pid, u32 group, int code)
 {
 	struct netlink_set_err_data info;
@@ -1093,7 +1100,8 @@
 	info.exclude_sk = ssk;
 	info.pid = pid;
 	info.group = group;
-	info.code = code;
+	/* sk->sk_err wants a positive error value */
+	info.code = -code;
 
 	read_lock(&nl_table_lock);
 
diff --git a/net/sched/act_police.c b/net/sched/act_police.c
index 5c72a11..f8f047b 100644
--- a/net/sched/act_police.c
+++ b/net/sched/act_police.c
@@ -183,13 +183,6 @@
 		if (R_tab == NULL)
 			goto failure;
 
-		if (!est && (ret == ACT_P_CREATED ||
-			     !gen_estimator_active(&police->tcf_bstats,
-						   &police->tcf_rate_est))) {
-			err = -EINVAL;
-			goto failure;
-		}
-
 		if (parm->peakrate.rate) {
 			P_tab = qdisc_get_rtab(&parm->peakrate,
 					       tb[TCA_POLICE_PEAKRATE]);
@@ -205,6 +198,12 @@
 					    &police->tcf_lock, est);
 		if (err)
 			goto failure_unlock;
+	} else if (tb[TCA_POLICE_AVRATE] &&
+		   (ret == ACT_P_CREATED ||
+		    !gen_estimator_active(&police->tcf_bstats,
+					  &police->tcf_rate_est))) {
+		err = -EINVAL;
+		goto failure_unlock;
 	}
 
 	/* No failure allowed after this point */
diff --git a/net/sched/sch_drr.c b/net/sched/sch_drr.c
index f6b4fa9..e36e94a 100644
--- a/net/sched/sch_drr.c
+++ b/net/sched/sch_drr.c
@@ -66,11 +66,15 @@
 {
 	struct drr_sched *q = qdisc_priv(sch);
 	struct drr_class *cl = (struct drr_class *)*arg;
+	struct nlattr *opt = tca[TCA_OPTIONS];
 	struct nlattr *tb[TCA_DRR_MAX + 1];
 	u32 quantum;
 	int err;
 
-	err = nla_parse_nested(tb, TCA_DRR_MAX, tca[TCA_OPTIONS], drr_policy);
+	if (!opt)
+		return -EINVAL;
+
+	err = nla_parse_nested(tb, TCA_DRR_MAX, opt, drr_policy);
 	if (err < 0)
 		return err;
 
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index b78e3be..c4986d0 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -717,15 +717,20 @@
 static int sctp_ctl_sock_init(void)
 {
 	int err;
-	sa_family_t family;
+	sa_family_t family = PF_INET;
 
 	if (sctp_get_pf_specific(PF_INET6))
 		family = PF_INET6;
-	else
-		family = PF_INET;
 
 	err = inet_ctl_sock_create(&sctp_ctl_sock, family,
 				   SOCK_SEQPACKET, IPPROTO_SCTP, &init_net);
+
+	/* If IPv6 socket could not be created, try the IPv4 socket */
+	if (err < 0 && family == PF_INET6)
+		err = inet_ctl_sock_create(&sctp_ctl_sock, AF_INET,
+					   SOCK_SEQPACKET, IPPROTO_SCTP,
+					   &init_net);
+
 	if (err < 0) {
 		printk(KERN_ERR
 		       "SCTP: Failed to create the SCTP control socket.\n");
@@ -1322,9 +1327,8 @@
 out:
 	return status;
 err_v6_add_protocol:
-	sctp_v6_del_protocol();
-err_add_protocol:
 	sctp_v4_del_protocol();
+err_add_protocol:
 	inet_ctl_sock_destroy(sctp_ctl_sock);
 err_ctl_sock_init:
 	sctp_v6_protosw_exit();
@@ -1335,7 +1339,6 @@
 	sctp_v4_pf_exit();
 	sctp_v6_pf_exit();
 	sctp_sysctl_unregister();
-	list_del(&sctp_af_inet.list);
 	free_pages((unsigned long)sctp_port_hashtable,
 		   get_order(sctp_port_hashsize *
 			     sizeof(struct sctp_bind_hashbucket)));
@@ -1383,7 +1386,6 @@
 	sctp_v4_pf_exit();
 
 	sctp_sysctl_unregister();
-	list_del(&sctp_af_inet.list);
 
 	free_pages((unsigned long)sctp_assoc_hashtable,
 		   get_order(sctp_assoc_hashsize *
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index e1d6076..b5495ae 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -787,36 +787,48 @@
 				   struct sctp_association *asoc,
 				   struct sctp_chunk *chunk)
 {
-	struct sctp_operr_chunk *operr_chunk;
 	struct sctp_errhdr *err_hdr;
+	struct sctp_ulpevent *ev;
 
-	operr_chunk = (struct sctp_operr_chunk *)chunk->chunk_hdr;
-	err_hdr = &operr_chunk->err_hdr;
+	while (chunk->chunk_end > chunk->skb->data) {
+		err_hdr = (struct sctp_errhdr *)(chunk->skb->data);
 
-	switch (err_hdr->cause) {
-	case SCTP_ERROR_UNKNOWN_CHUNK:
-	{
-		struct sctp_chunkhdr *unk_chunk_hdr;
+		ev = sctp_ulpevent_make_remote_error(asoc, chunk, 0,
+						     GFP_ATOMIC);
+		if (!ev)
+			return;
 
-		unk_chunk_hdr = (struct sctp_chunkhdr *)err_hdr->variable;
-		switch (unk_chunk_hdr->type) {
-		/* ADDIP 4.1 A9) If the peer responds to an ASCONF with an
-		 * ERROR chunk reporting that it did not recognized the ASCONF
-		 * chunk type, the sender of the ASCONF MUST NOT send any
-		 * further ASCONF chunks and MUST stop its T-4 timer.
-		 */
-		case SCTP_CID_ASCONF:
-			asoc->peer.asconf_capable = 0;
-			sctp_add_cmd_sf(cmds, SCTP_CMD_TIMER_STOP,
+		sctp_ulpq_tail_event(&asoc->ulpq, ev);
+
+		switch (err_hdr->cause) {
+		case SCTP_ERROR_UNKNOWN_CHUNK:
+		{
+			sctp_chunkhdr_t *unk_chunk_hdr;
+
+			unk_chunk_hdr = (sctp_chunkhdr_t *)err_hdr->variable;
+			switch (unk_chunk_hdr->type) {
+			/* ADDIP 4.1 A9) If the peer responds to an ASCONF with
+			 * an ERROR chunk reporting that it did not recognized
+			 * the ASCONF chunk type, the sender of the ASCONF MUST
+			 * NOT send any further ASCONF chunks and MUST stop its
+			 * T-4 timer.
+			 */
+			case SCTP_CID_ASCONF:
+				if (asoc->peer.asconf_capable == 0)
+					break;
+
+				asoc->peer.asconf_capable = 0;
+				sctp_add_cmd_sf(cmds, SCTP_CMD_TIMER_STOP,
 					SCTP_TO(SCTP_EVENT_TIMEOUT_T4_RTO));
+				break;
+			default:
+				break;
+			}
 			break;
+		}
 		default:
 			break;
 		}
-		break;
-	}
-	default:
-		break;
 	}
 }
 
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 3a0cd07..f88dfde 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -3163,7 +3163,6 @@
 					sctp_cmd_seq_t *commands)
 {
 	struct sctp_chunk *chunk = arg;
-	struct sctp_ulpevent *ev;
 
 	if (!sctp_vtag_verify(chunk, asoc))
 		return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
@@ -3173,21 +3172,10 @@
 		return sctp_sf_violation_chunklen(ep, asoc, type, arg,
 						  commands);
 
-	while (chunk->chunk_end > chunk->skb->data) {
-		ev = sctp_ulpevent_make_remote_error(asoc, chunk, 0,
-						     GFP_ATOMIC);
-		if (!ev)
-			goto nomem;
+	sctp_add_cmd_sf(commands, SCTP_CMD_PROCESS_OPERR,
+			SCTP_CHUNK(chunk));
 
-		sctp_add_cmd_sf(commands, SCTP_CMD_EVENT_ULP,
-				SCTP_ULPEVENT(ev));
-		sctp_add_cmd_sf(commands, SCTP_CMD_PROCESS_OPERR,
-				SCTP_CHUNK(chunk));
-	}
 	return SCTP_DISPOSITION_CONSUME;
-
-nomem:
-	return SCTP_DISPOSITION_NOMEM;
 }
 
 /*
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 85c9034..bd0a16c 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -380,7 +380,8 @@
 
 	freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz;
 
-	if (freq_diff <= 0 || freq_range->max_bandwidth_khz > freq_diff)
+	if (freq_range->end_freq_khz <= freq_range->start_freq_khz ||
+			freq_range->max_bandwidth_khz > freq_diff)
 		return false;
 
 	return true;
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 45eb0ae..2d5ece7 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -10,7 +10,7 @@
 my $P = $0;
 $P =~ s@.*/@@g;
 
-my $V = '0.27';
+my $V = '0.28';
 
 use Getopt::Long qw(:config no_auto_abbrev);
 
@@ -110,7 +110,8 @@
 			__iomem|
 			__must_check|
 			__init_refok|
-			__kprobes
+			__kprobes|
+			__ref
 		}x;
 our $Attribute	= qr{
 			const|
@@ -1240,7 +1241,8 @@
 			$realfile =~ s@^([^/]*)/@@;
 
 			$p1_prefix = $1;
-			if ($tree && $p1_prefix ne '' && -e "$root/$p1_prefix") {
+			if (!$file && $tree && $p1_prefix ne '' &&
+			    -e "$root/$p1_prefix") {
 				WARN("patch prefix '$p1_prefix' exists, appears to be a -p0 patch\n");
 			}
 
@@ -1583,9 +1585,9 @@
 		}
 # TEST: allow direct testing of the attribute matcher.
 		if ($dbg_attr) {
-			if ($line =~ /^.\s*$Attribute\s*$/) {
+			if ($line =~ /^.\s*$Modifier\s*$/) {
 				ERROR("TEST: is attr\n" . $herecurr);
-			} elsif ($dbg_attr > 1 && $line =~ /^.+($Attribute)/) {
+			} elsif ($dbg_attr > 1 && $line =~ /^.+($Modifier)/) {
 				ERROR("TEST: is not attr ($1 is)\n". $herecurr);
 			}
 			next;
@@ -1657,7 +1659,7 @@
 
 # * goes on variable not on type
 		# (char*[ const])
-		if ($line =~ m{\($NonptrType(\s*\*[\s\*]*(?:$Modifier\s*)*)\)}) {
+		if ($line =~ m{\($NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)\)}) {
 			my ($from, $to) = ($1, $1);
 
 			# Should start with a space.
@@ -1672,7 +1674,7 @@
 			if ($from ne $to) {
 				ERROR("\"(foo$from)\" should be \"(foo$to)\"\n" .  $herecurr);
 			}
-		} elsif ($line =~ m{\b$NonptrType(\s*\*[\s\*]*(?:$Modifier\s*)?)($Ident)}) {
+		} elsif ($line =~ m{\b$NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)($Ident)}) {
 			my ($from, $to, $ident) = ($1, $1, $2);
 
 			# Should start with a space.
@@ -1685,8 +1687,8 @@
 			# Modifiers should have spaces.
 			$to =~ s/(\b$Modifier$)/$1 /;
 
-			#print "from<$from> to<$to>\n";
-			if ($from ne $to) {
+			#print "from<$from> to<$to> ident<$ident>\n";
+			if ($from ne $to && $ident !~ /^$Modifier$/) {
 				ERROR("\"foo${from}bar\" should be \"foo${to}bar\"\n" .  $herecurr);
 			}
 		}
@@ -1885,11 +1887,11 @@
 					if ($ctx !~ /[WEBC]x./ && $ca !~ /(?:\)|!|~|\*|-|\&|\||\+\+|\-\-|\{)$/) {
 						ERROR("space required before that '$op' $at\n" . $hereptr);
 					}
-					if ($op eq '*' && $cc =~/\s*const\b/) {
+					if ($op eq '*' && $cc =~/\s*$Modifier\b/) {
 						# A unary '*' may be const
 
 					} elsif ($ctx =~ /.xW/) {
-						ERROR("space prohibited after that '$op' $at\n" . $hereptr);
+						ERROR("Aspace prohibited after that '$op' $at\n" . $hereptr);
 					}
 
 				# unary ++ and unary -- are allowed no space on one side.
@@ -2560,7 +2562,7 @@
 		if ($line =~ /\bin_atomic\s*\(/) {
 			if ($realfile =~ m@^drivers/@) {
 				ERROR("do not use in_atomic in drivers\n" . $herecurr);
-			} else {
+			} elsif ($realfile !~ m@^kernel/@) {
 				WARN("use of in_atomic() is incorrect outside core kernel code\n" . $herecurr);
 			}
 		}
diff --git a/scripts/package/Makefile b/scripts/package/Makefile
index 8c6b7b0..fa4a0a1 100644
--- a/scripts/package/Makefile
+++ b/scripts/package/Makefile
@@ -35,9 +35,10 @@
 rpm-pkg rpm: $(objtree)/kernel.spec FORCE
 	$(MAKE) clean
 	$(PREV) ln -sf $(srctree) $(KERNELPATH)
+	$(CONFIG_SHELL) $(srctree)/scripts/setlocalversion > $(objtree)/.scmversion
 	$(PREV) tar -cz $(RCS_TAR_IGNORE) -f $(KERNELPATH).tar.gz $(KERNELPATH)/.
 	$(PREV) rm $(KERNELPATH)
-
+	rm -f $(objtree)/.scmversion
 	set -e; \
 	$(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version
 	set -e; \
diff --git a/scripts/package/mkspec b/scripts/package/mkspec
index ee448cd..3d93f8c 100755
--- a/scripts/package/mkspec
+++ b/scripts/package/mkspec
@@ -96,7 +96,7 @@
 
 echo ""
 echo "%clean"
-echo '#echo -rf $RPM_BUILD_ROOT'
+echo 'rm -rf $RPM_BUILD_ROOT'
 echo ""
 echo "%files"
 echo '%defattr (-, root, root)'
diff --git a/scripts/unifdef.c b/scripts/unifdef.c
index 552025e..05a31a6 100644
--- a/scripts/unifdef.c
+++ b/scripts/unifdef.c
@@ -206,7 +206,7 @@
 static void             error(const char *);
 static int              findsym(const char *);
 static void             flushline(bool);
-static Linetype         getline(void);
+static Linetype         get_line(void);
 static Linetype         ifeval(const char **);
 static void             ignoreoff(void);
 static void             ignoreon(void);
@@ -512,7 +512,7 @@
 
 	for (;;) {
 		linenum++;
-		lineval = getline();
+		lineval = get_line();
 		trans_table[ifstate[depth]][lineval]();
 		debug("process %s -> %s depth %d",
 		    linetype_name[lineval],
@@ -526,7 +526,7 @@
  * help from skipcomment().
  */
 static Linetype
-getline(void)
+get_line(void)
 {
 	const char *cp;
 	int cursym;
diff --git a/security/selinux/netlabel.c b/security/selinux/netlabel.c
index 3f4b266..350794a 100644
--- a/security/selinux/netlabel.c
+++ b/security/selinux/netlabel.c
@@ -386,11 +386,12 @@
 	if (!S_ISSOCK(inode->i_mode) ||
 	    ((mask & (MAY_WRITE | MAY_APPEND)) == 0))
 		return 0;
-
 	sock = SOCKET_I(inode);
 	sk = sock->sk;
+	if (sk == NULL)
+		return 0;
 	sksec = sk->sk_security;
-	if (sksec->nlbl_state != NLBL_REQUIRE)
+	if (sksec == NULL || sksec->nlbl_state != NLBL_REQUIRE)
 		return 0;
 
 	local_bh_disable();
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 0278bc0..e7ded13 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -1498,58 +1498,31 @@
  * looks for host based access restrictions
  *
  * This version will only be appropriate for really small
- * sets of single label hosts. Because of the masking
- * it cannot shortcut out on the first match. There are
- * numerious ways to address the problem, but none of them
- * have been applied here.
+ * sets of single label hosts.
  *
  * Returns the label of the far end or NULL if it's not special.
  */
 static char *smack_host_label(struct sockaddr_in *sip)
 {
 	struct smk_netlbladdr *snp;
-	char *bestlabel = NULL;
 	struct in_addr *siap = &sip->sin_addr;
-	struct in_addr *liap;
-	struct in_addr *miap;
-	struct in_addr bestmask;
 
 	if (siap->s_addr == 0)
 		return NULL;
 
-	bestmask.s_addr = 0;
-
 	for (snp = smack_netlbladdrs; snp != NULL; snp = snp->smk_next) {
-		liap = &snp->smk_host.sin_addr;
-		miap = &snp->smk_mask;
 		/*
-		 * If the addresses match after applying the list entry mask
-		 * the entry matches the address. If it doesn't move along to
-		 * the next entry.
+		 * we break after finding the first match because
+		 * the list is sorted from longest to shortest mask
+		 * so we have found the most specific match
 		 */
-		if ((liap->s_addr & miap->s_addr) !=
-		    (siap->s_addr & miap->s_addr))
-			continue;
-		/*
-		 * If the list entry mask identifies a single address
-		 * it can't get any more specific.
-		 */
-		if (miap->s_addr == 0xffffffff)
+		if ((&snp->smk_host.sin_addr)->s_addr  ==
+			(siap->s_addr & (&snp->smk_mask)->s_addr)) {
 			return snp->smk_label;
-		/*
-		 * If the list entry mask is less specific than the best
-		 * already found this entry is uninteresting.
-		 */
-		if ((miap->s_addr | bestmask.s_addr) == bestmask.s_addr)
-			continue;
-		/*
-		 * This is better than any entry found so far.
-		 */
-		bestmask.s_addr = miap->s_addr;
-		bestlabel = snp->smk_label;
+		}
 	}
 
-	return bestlabel;
+	return NULL;
 }
 
 /**
diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c
index 8e42800..51f0efc 100644
--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -650,10 +650,6 @@
 
 	return skp;
 }
-/*
-#define BEMASK	0x80000000
-*/
-#define BEMASK	0x00000001
 #define BEBITS	(sizeof(__be32) * 8)
 
 /*
@@ -663,12 +659,10 @@
 {
 	struct smk_netlbladdr *skp = (struct smk_netlbladdr *) v;
 	unsigned char *hp = (char *) &skp->smk_host.sin_addr.s_addr;
-	__be32 bebits;
-	int maskn = 0;
+	int maskn;
+	u32 temp_mask = be32_to_cpu(skp->smk_mask.s_addr);
 
-	for (bebits = BEMASK; bebits != 0; maskn++, bebits <<= 1)
-		if ((skp->smk_mask.s_addr & bebits) == 0)
-			break;
+	for (maskn = 0; temp_mask; temp_mask <<= 1, maskn++);
 
 	seq_printf(s, "%u.%u.%u.%u/%d %s\n",
 		hp[0], hp[1], hp[2], hp[3], maskn, skp->smk_label);
@@ -702,6 +696,42 @@
 }
 
 /**
+ * smk_netlbladdr_insert
+ * @new : netlabel to insert
+ *
+ * This helper insert netlabel in the smack_netlbladdrs list
+ * sorted by netmask length (longest to smallest)
+ */
+static void smk_netlbladdr_insert(struct smk_netlbladdr *new)
+{
+	struct smk_netlbladdr *m;
+
+	if (smack_netlbladdrs == NULL) {
+		smack_netlbladdrs = new;
+		return;
+	}
+
+	/* the comparison '>' is a bit hacky, but works */
+	if (new->smk_mask.s_addr > smack_netlbladdrs->smk_mask.s_addr) {
+		new->smk_next = smack_netlbladdrs;
+		smack_netlbladdrs = new;
+		return;
+	}
+	for (m = smack_netlbladdrs; m != NULL; m = m->smk_next) {
+		if (m->smk_next == NULL) {
+			m->smk_next = new;
+			return;
+		}
+		if (new->smk_mask.s_addr > m->smk_next->smk_mask.s_addr) {
+			new->smk_next = m->smk_next;
+			m->smk_next = new;
+			return;
+		}
+	}
+}
+
+
+/**
  * smk_write_netlbladdr - write() for /smack/netlabel
  * @filp: file pointer, not actually used
  * @buf: where to get the data from
@@ -724,8 +754,9 @@
 	struct netlbl_audit audit_info;
 	struct in_addr mask;
 	unsigned int m;
-	__be32 bebits = BEMASK;
+	u32 mask_bits = (1<<31);
 	__be32 nsa;
+	u32 temp_mask;
 
 	/*
 	 * Must have privilege.
@@ -761,10 +792,13 @@
 	if (sp == NULL)
 		return -EINVAL;
 
-	for (mask.s_addr = 0; m > 0; m--) {
-		mask.s_addr |= bebits;
-		bebits <<= 1;
+	for (temp_mask = 0; m > 0; m--) {
+		temp_mask |= mask_bits;
+		mask_bits >>= 1;
 	}
+	mask.s_addr = cpu_to_be32(temp_mask);
+
+	newname.sin_addr.s_addr &= mask.s_addr;
 	/*
 	 * Only allow one writer at a time. Writes should be
 	 * quite rare and small in any case.
@@ -772,6 +806,7 @@
 	mutex_lock(&smk_netlbladdr_lock);
 
 	nsa = newname.sin_addr.s_addr;
+	/* try to find if the prefix is already in the list */
 	for (skp = smack_netlbladdrs; skp != NULL; skp = skp->smk_next)
 		if (skp->smk_host.sin_addr.s_addr == nsa &&
 		    skp->smk_mask.s_addr == mask.s_addr)
@@ -787,9 +822,8 @@
 			rc = 0;
 			skp->smk_host.sin_addr.s_addr = newname.sin_addr.s_addr;
 			skp->smk_mask.s_addr = mask.s_addr;
-			skp->smk_next = smack_netlbladdrs;
 			skp->smk_label = sp;
-			smack_netlbladdrs = skp;
+			smk_netlbladdr_insert(skp);
 		}
 	} else {
 		rc = netlbl_cfg_unlbl_static_del(&init_net, NULL,
diff --git a/sound/core/oss/rate.c b/sound/core/oss/rate.c
index a466443..2fa9299 100644
--- a/sound/core/oss/rate.c
+++ b/sound/core/oss/rate.c
@@ -157,7 +157,7 @@
 		while (dst_frames1 > 0) {
 			S1 = S2;
 			if (src_frames1-- > 0) {
-				S1 = *src;
+				S2 = *src;
 				src += src_step;
 			}
 			if (pos & ~R_MASK) {
diff --git a/sound/pci/aw2/aw2-alsa.c b/sound/pci/aw2/aw2-alsa.c
index 3f00ddf..c7c54e7 100644
--- a/sound/pci/aw2/aw2-alsa.c
+++ b/sound/pci/aw2/aw2-alsa.c
@@ -165,7 +165,7 @@
 MODULE_PARM_DESC(enable, "Enable Audiowerk2 soundcard.");
 
 static struct pci_device_id snd_aw2_ids[] = {
-	{PCI_VENDOR_ID_SAA7146, PCI_DEVICE_ID_SAA7146, PCI_ANY_ID, PCI_ANY_ID,
+	{PCI_VENDOR_ID_SAA7146, PCI_DEVICE_ID_SAA7146, 0, 0,
 	 0, 0, 0},
 	{0}
 };
diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c
index 7958006..101a1c1 100644
--- a/sound/pci/emu10k1/emu10k1_main.c
+++ b/sound/pci/emu10k1/emu10k1_main.c
@@ -1528,6 +1528,7 @@
 	 .ca0151_chip = 1,
 	 .spk71 = 1,
 	 .spdif_bug = 1,
+	 .invert_shared_spdif = 1,	/* digital/analog switch swapped */
 	 .ac97_chip = 1} ,
 	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10021102,
 	 .driver = "Audigy2", .name = "SB Audigy 2 Platinum [SB0240P]",
diff --git a/sound/pci/hda/hda_hwdep.c b/sound/pci/hda/hda_hwdep.c
index 482fb03..4ae51dc 100644
--- a/sound/pci/hda/hda_hwdep.c
+++ b/sound/pci/hda/hda_hwdep.c
@@ -277,18 +277,19 @@
 {
 	struct snd_hwdep *hwdep = dev_get_drvdata(dev);
 	struct hda_codec *codec = hwdep->private_data;
-	char *p;
-	struct hda_verb verb, *v;
+	struct hda_verb *v;
+	int nid, verb, param;
 
-	verb.nid = simple_strtoul(buf, &p, 0);
-	verb.verb = simple_strtoul(p, &p, 0);
-	verb.param = simple_strtoul(p, &p, 0);
-	if (!verb.nid || !verb.verb || !verb.param)
+	if (sscanf(buf, "%i %i %i", &nid, &verb, &param) != 3)
+		return -EINVAL;
+	if (!nid || !verb)
 		return -EINVAL;
 	v = snd_array_new(&codec->init_verbs);
 	if (!v)
 		return -ENOMEM;
-	*v = verb;
+	v->nid = nid;
+	v->verb = verb;
+	v->param = param;
 	return count;
 }
 
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index c8d9178..5e909e0 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2095,6 +2095,8 @@
 	SND_PCI_QUIRK(0x1028, 0x20ac, "Dell Studio Desktop", 0x01),
 	/* including bogus ALC268 in slot#2 that conflicts with ALC888 */
 	SND_PCI_QUIRK(0x17c0, 0x4085, "Medion MD96630", 0x01),
+	/* conflict of ALC268 in slot#3 (digital I/O); a temporary fix */
+	SND_PCI_QUIRK(0x1179, 0xff00, "Toshiba laptop", 0x03),
 	{}
 };
 
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index ed8fcbd..6c26afc 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7017,6 +7017,7 @@
 		case 0x106b3e00: /* iMac 24 Aluminium */
 			board_config = ALC885_IMAC24;
 			break;
+		case 0x106b00a0: /* MacBookPro3,1 - Another revision */
 		case 0x106b00a1: /* Macbook (might be wrong - PCI SSID?) */
 		case 0x106b00a4: /* MacbookPro4,1 */
 		case 0x106b2c00: /* Macbook Pro rev3 */
@@ -8469,6 +8470,8 @@
 		ALC888_ACER_ASPIRE_4930G),
 	SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G",
 		ALC888_ACER_ASPIRE_4930G),
+	SND_PCI_QUIRK(0x1025, 0x0166, "Acer Aspire 6530G",
+		ALC888_ACER_ASPIRE_4930G),
 	SND_PCI_QUIRK(0x1025, 0, "Acer laptop", ALC883_ACER), /* default Acer */
 	SND_PCI_QUIRK(0x1028, 0x020d, "Dell Inspiron 530", ALC888_6ST_DELL),
 	SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavillion", ALC883_6ST_DIG),
@@ -10554,6 +10557,7 @@
 	SND_PCI_QUIRK(0x103c, 0x1309, "HP xw4*00", ALC262_HP_BPC),
 	SND_PCI_QUIRK(0x103c, 0x130a, "HP xw6*00", ALC262_HP_BPC),
 	SND_PCI_QUIRK(0x103c, 0x130b, "HP xw8*00", ALC262_HP_BPC),
+	SND_PCI_QUIRK(0x103c, 0x170b, "HP xw*", ALC262_HP_BPC),
 	SND_PCI_QUIRK(0x103c, 0x2800, "HP D7000", ALC262_HP_BPC_D7000_WL),
 	SND_PCI_QUIRK(0x103c, 0x2801, "HP D7000", ALC262_HP_BPC_D7000_WF),
 	SND_PCI_QUIRK(0x103c, 0x2802, "HP D7000", ALC262_HP_BPC_D7000_WL),
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 8027edf..6094344 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1207,7 +1207,7 @@
 	"LFE Playback Volume",
 	"Side Playback Volume",
 	"Headphone Playback Volume",
-	"Headphone Playback Volume",
+	"Headphone2 Playback Volume",
 	"Speaker Playback Volume",
 	"External Speaker Playback Volume",
 	"Speaker2 Playback Volume",
@@ -1221,7 +1221,7 @@
 	"LFE Playback Switch",
 	"Side Playback Switch",
 	"Headphone Playback Switch",
-	"Headphone Playback Switch",
+	"Headphone2 Playback Switch",
 	"Speaker Playback Switch",
 	"External Speaker Playback Switch",
 	"Speaker2 Playback Switch",
@@ -3516,6 +3516,7 @@
 	if (! spec->autocfg.line_outs)
 		return 0; /* can't find valid pin config */
 
+#if 0 /* FIXME: temporarily disabled */
 	/* If we have no real line-out pin and multiple hp-outs, HPs should
 	 * be set up as multi-channel outputs.
 	 */
@@ -3535,6 +3536,7 @@
 		spec->autocfg.line_out_type = AUTO_PIN_HP_OUT;
 		spec->autocfg.hp_outs = 0;
 	}
+#endif /* FIXME: temporarily disabled */
 	if (spec->autocfg.mono_out_pin) {
 		int dir = get_wcaps(codec, spec->autocfg.mono_out_pin) &
 			(AC_WCAP_OUT_AMP | AC_WCAP_IN_AMP);
@@ -4989,7 +4991,7 @@
 	case STAC_DELL_M4_3:
 		spec->num_dmics = 1;
 		spec->num_smuxes = 0;
-		spec->num_dmuxes = 0;
+		spec->num_dmuxes = 1;
 		break;
 	default:
 		spec->num_dmics = STAC92HD71BXX_NUM_DMICS;
diff --git a/sound/pci/pcxhr/pcxhr.h b/sound/pci/pcxhr/pcxhr.h
index 84131a9..69d87de 100644
--- a/sound/pci/pcxhr/pcxhr.h
+++ b/sound/pci/pcxhr/pcxhr.h
@@ -97,12 +97,12 @@
 	int capture_chips;
 	int fw_file_set;
 	int firmware_num;
-	int is_hr_stereo:1;
-	int board_has_aes1:1;	/* if 1 board has AES1 plug and SRC */
-	int board_has_analog:1;	/* if 0 the board is digital only */
-	int board_has_mic:1;	/* if 1 the board has microphone input */
-	int board_aes_in_192k:1;/* if 1 the aes input plugs do support 192kHz */
-	int mono_capture:1;	/* if 1 the board does mono capture */
+	unsigned int is_hr_stereo:1;
+	unsigned int board_has_aes1:1;	/* if 1 board has AES1 plug and SRC */
+	unsigned int board_has_analog:1; /* if 0 the board is digital only */
+	unsigned int board_has_mic:1; /* if 1 the board has microphone input */
+	unsigned int board_aes_in_192k:1;/* if 1 the aes input plugs do support 192kHz */
+	unsigned int mono_capture:1; /* if 1 the board does mono capture */
 
 	struct snd_dma_buffer hostport;