| #include <linux/prefetch.h> |
| |
| /** |
| * iommu_fill_pdir - Insert coalesced scatter/gather chunks into the I/O Pdir. |
| * @ioc: The I/O Controller. |
| * @startsg: The scatter/gather list of coalesced chunks. |
| * @nents: The number of entries in the scatter/gather list. |
| * @hint: The DMA Hint. |
| * |
| * This function inserts the coalesced scatter/gather list chunks into the |
| * I/O Controller's I/O Pdir. |
| */ |
| static inline unsigned int |
| iommu_fill_pdir(struct ioc *ioc, struct scatterlist *startsg, int nents, |
| unsigned long hint, |
| void (*iommu_io_pdir_entry)(u64 *, space_t, unsigned long, |
| unsigned long)) |
| { |
| struct scatterlist *dma_sg = startsg; /* pointer to current DMA */ |
| unsigned int n_mappings = 0; |
| unsigned long dma_offset = 0, dma_len = 0; |
| u64 *pdirp = NULL; |
| |
| /* Horrible hack. For efficiency's sake, dma_sg starts one |
| * entry below the true start (it is immediately incremented |
| * in the loop) */ |
| dma_sg--; |
| |
| while (nents-- > 0) { |
| unsigned long vaddr; |
| long size; |
| |
| DBG_RUN_SG(" %d : %08lx/%05x %08lx/%05x\n", nents, |
| (unsigned long)sg_dma_address(startsg), cnt, |
| sg_virt_addr(startsg), startsg->length |
| ); |
| |
| |
| /* |
| ** Look for the start of a new DMA stream |
| */ |
| |
| if (sg_dma_address(startsg) & PIDE_FLAG) { |
| u32 pide = sg_dma_address(startsg) & ~PIDE_FLAG; |
| |
| BUG_ON(pdirp && (dma_len != sg_dma_len(dma_sg))); |
| |
| dma_sg++; |
| |
| dma_len = sg_dma_len(startsg); |
| sg_dma_len(startsg) = 0; |
| dma_offset = (unsigned long) pide & ~IOVP_MASK; |
| n_mappings++; |
| #if defined(ZX1_SUPPORT) |
| /* Pluto IOMMU IO Virt Address is not zero based */ |
| sg_dma_address(dma_sg) = pide | ioc->ibase; |
| #else |
| /* SBA, ccio, and dino are zero based. |
| * Trying to save a few CPU cycles for most users. |
| */ |
| sg_dma_address(dma_sg) = pide; |
| #endif |
| pdirp = &(ioc->pdir_base[pide >> IOVP_SHIFT]); |
| prefetchw(pdirp); |
| } |
| |
| BUG_ON(pdirp == NULL); |
| |
| vaddr = sg_virt_addr(startsg); |
| sg_dma_len(dma_sg) += startsg->length; |
| size = startsg->length + dma_offset; |
| dma_offset = 0; |
| #ifdef IOMMU_MAP_STATS |
| ioc->msg_pages += startsg->length >> IOVP_SHIFT; |
| #endif |
| do { |
| iommu_io_pdir_entry(pdirp, KERNEL_SPACE, |
| vaddr, hint); |
| vaddr += IOVP_SIZE; |
| size -= IOVP_SIZE; |
| pdirp++; |
| } while(unlikely(size > 0)); |
| startsg++; |
| } |
| return(n_mappings); |
| } |
| |
| |
| /* |
| ** First pass is to walk the SG list and determine where the breaks are |
| ** in the DMA stream. Allocates PDIR entries but does not fill them. |
| ** Returns the number of DMA chunks. |
| ** |
| ** Doing the fill separate from the coalescing/allocation keeps the |
| ** code simpler. Future enhancement could make one pass through |
| ** the sglist do both. |
| */ |
| |
| static inline unsigned int |
| iommu_coalesce_chunks(struct ioc *ioc, struct device *dev, |
| struct scatterlist *startsg, int nents, |
| int (*iommu_alloc_range)(struct ioc *, struct device *, size_t)) |
| { |
| struct scatterlist *contig_sg; /* contig chunk head */ |
| unsigned long dma_offset, dma_len; /* start/len of DMA stream */ |
| unsigned int n_mappings = 0; |
| unsigned int max_seg_size = min(dma_get_max_seg_size(dev), |
| (unsigned)DMA_CHUNK_SIZE); |
| unsigned int max_seg_boundary = dma_get_seg_boundary(dev) + 1; |
| if (max_seg_boundary) /* check if the addition above didn't overflow */ |
| max_seg_size = min(max_seg_size, max_seg_boundary); |
| |
| while (nents > 0) { |
| |
| /* |
| ** Prepare for first/next DMA stream |
| */ |
| contig_sg = startsg; |
| dma_len = startsg->length; |
| dma_offset = sg_virt_addr(startsg) & ~IOVP_MASK; |
| |
| /* PARANOID: clear entries */ |
| sg_dma_address(startsg) = 0; |
| sg_dma_len(startsg) = 0; |
| |
| /* |
| ** This loop terminates one iteration "early" since |
| ** it's always looking one "ahead". |
| */ |
| while(--nents > 0) { |
| unsigned long prevstartsg_end, startsg_end; |
| |
| prevstartsg_end = sg_virt_addr(startsg) + |
| startsg->length; |
| |
| startsg++; |
| startsg_end = sg_virt_addr(startsg) + |
| startsg->length; |
| |
| /* PARANOID: clear entries */ |
| sg_dma_address(startsg) = 0; |
| sg_dma_len(startsg) = 0; |
| |
| /* |
| ** First make sure current dma stream won't |
| ** exceed max_seg_size if we coalesce the |
| ** next entry. |
| */ |
| if (unlikely(ALIGN(dma_len + dma_offset + startsg->length, IOVP_SIZE) > |
| max_seg_size)) |
| break; |
| |
| /* |
| ** Next see if we can append the next chunk (i.e. |
| ** it must end on one page and begin on another |
| */ |
| if (unlikely(((prevstartsg_end | sg_virt_addr(startsg)) & ~PAGE_MASK) != 0)) |
| break; |
| |
| dma_len += startsg->length; |
| } |
| |
| /* |
| ** End of DMA Stream |
| ** Terminate last VCONTIG block. |
| ** Allocate space for DMA stream. |
| */ |
| sg_dma_len(contig_sg) = dma_len; |
| dma_len = ALIGN(dma_len + dma_offset, IOVP_SIZE); |
| sg_dma_address(contig_sg) = |
| PIDE_FLAG |
| | (iommu_alloc_range(ioc, dev, dma_len) << IOVP_SHIFT) |
| | dma_offset; |
| n_mappings++; |
| } |
| |
| return n_mappings; |
| } |
| |