| /* |
| * TX3927 setup routines |
| * Based on linux/arch/mips/txx9/jmr3927/setup.c |
| * |
| * Copyright 2001 MontaVista Software Inc. |
| * Copyright (C) 2000-2001 Toshiba Corporation |
| * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| */ |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/serial_core.h> |
| #include <linux/param.h> |
| #include <asm/mipsregs.h> |
| #include <asm/txx9irq.h> |
| #include <asm/txx9tmr.h> |
| #include <asm/txx9pio.h> |
| #include <asm/txx9/generic.h> |
| #include <asm/txx9/tx3927.h> |
| |
| void __init tx3927_wdt_init(void) |
| { |
| txx9_wdt_init(TX3927_TMR_REG(2)); |
| } |
| |
| void __init tx3927_setup(void) |
| { |
| int i; |
| unsigned int conf; |
| |
| /* don't enable - see errata */ |
| txx9_ccfg_toeon = 0; |
| if (strstr(prom_getcmdline(), "toeon") != NULL) |
| txx9_ccfg_toeon = 1; |
| |
| txx9_reg_res_init(TX3927_REV_PCODE(), TX3927_REG_BASE, |
| TX3927_REG_SIZE); |
| |
| /* SDRAMC,ROMC are configured by PROM */ |
| for (i = 0; i < 8; i++) { |
| if (!(tx3927_romcptr->cr[i] & 0x8)) |
| continue; /* disabled */ |
| txx9_ce_res[i].start = (unsigned long)TX3927_ROMC_BA(i); |
| txx9_ce_res[i].end = |
| txx9_ce_res[i].start + TX3927_ROMC_SIZE(i) - 1; |
| request_resource(&iomem_resource, &txx9_ce_res[i]); |
| } |
| |
| /* clocks */ |
| txx9_gbus_clock = txx9_cpu_clock / 2; |
| /* change default value to udelay/mdelay take reasonable time */ |
| loops_per_jiffy = txx9_cpu_clock / HZ / 2; |
| |
| /* CCFG */ |
| /* enable Timeout BusError */ |
| if (txx9_ccfg_toeon) |
| tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE; |
| |
| /* clear BusErrorOnWrite flag */ |
| tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW; |
| if (read_c0_conf() & TX39_CONF_WBON) |
| /* Disable PCI snoop */ |
| tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP; |
| else |
| /* Enable PCI SNOOP - with write through only */ |
| tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP; |
| /* do reset on watchdog */ |
| tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR; |
| |
| printk(KERN_INFO "TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n", |
| tx3927_ccfgptr->crir, |
| tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg); |
| |
| /* TMR */ |
| for (i = 0; i < TX3927_NR_TMR; i++) |
| txx9_tmr_init(TX3927_TMR_REG(i)); |
| |
| /* DMA */ |
| tx3927_dmaptr->mcr = 0; |
| for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) { |
| /* reset channel */ |
| tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST; |
| tx3927_dmaptr->ch[i].ccr = 0; |
| } |
| /* enable DMA */ |
| #ifdef __BIG_ENDIAN |
| tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN; |
| #else |
| tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE; |
| #endif |
| |
| /* PIO */ |
| __raw_writel(0, &tx3927_pioptr->maskcpu); |
| __raw_writel(0, &tx3927_pioptr->maskext); |
| txx9_gpio_init(TX3927_PIO_REG, 0, 16); |
| |
| conf = read_c0_conf(); |
| if (!(conf & TX39_CONF_ICE)) |
| printk(KERN_INFO "TX3927 I-Cache disabled.\n"); |
| if (!(conf & TX39_CONF_DCE)) |
| printk(KERN_INFO "TX3927 D-Cache disabled.\n"); |
| else if (!(conf & TX39_CONF_WBON)) |
| printk(KERN_INFO "TX3927 D-Cache WriteThrough.\n"); |
| else if (!(conf & TX39_CONF_CWFON)) |
| printk(KERN_INFO "TX3927 D-Cache WriteBack.\n"); |
| else |
| printk(KERN_INFO "TX3927 D-Cache WriteBack (CWF) .\n"); |
| } |
| |
| void __init tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr) |
| { |
| txx9_clockevent_init(TX3927_TMR_REG(evt_tmrnr), |
| TXX9_IRQ_BASE + TX3927_IR_TMR(evt_tmrnr), |
| TXX9_IMCLK); |
| txx9_clocksource_init(TX3927_TMR_REG(src_tmrnr), TXX9_IMCLK); |
| } |
| |
| void __init tx3927_setup_serial(unsigned int cts_mask) |
| { |
| #ifdef CONFIG_SERIAL_TXX9 |
| int i; |
| struct uart_port req; |
| |
| for (i = 0; i < 2; i++) { |
| memset(&req, 0, sizeof(req)); |
| req.line = i; |
| req.iotype = UPIO_MEM; |
| req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i); |
| req.mapbase = TX3927_SIO_REG(i); |
| req.irq = TXX9_IRQ_BASE + TX3927_IR_SIO(i); |
| if (!((1 << i) & cts_mask)) |
| req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; |
| req.uartclk = TXX9_IMCLK; |
| early_serial_txx9_setup(&req); |
| } |
| #endif /* CONFIG_SERIAL_TXX9 */ |
| } |