| /* |
| * driver.h -- SoC Regulator driver support. |
| * |
| * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC. |
| * |
| * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Regulator Driver Interface. |
| */ |
| |
| #ifndef __LINUX_REGULATOR_DRIVER_H_ |
| #define __LINUX_REGULATOR_DRIVER_H_ |
| |
| #include <linux/device.h> |
| #include <linux/regulator/consumer.h> |
| |
| struct regulator_dev; |
| struct regulator_init_data; |
| |
| /** |
| * struct regulator_ops - regulator operations. |
| * |
| * This struct describes regulator operations which can be implemented by |
| * regulator chip drivers. |
| * |
| * @enable: Enable the regulator. |
| * @disable: Disable the regulator. |
| * @is_enabled: Return 1 if the regulator is enabled, 0 otherwise. |
| * |
| * @set_voltage: Set the voltage for the regulator within the range specified. |
| * The driver should select the voltage closest to min_uV. |
| * @get_voltage: Return the currently configured voltage for the regulator. |
| * |
| * @set_current_limit: Configure a limit for a current-limited regulator. |
| * @get_current_limit: Get the limit for a current-limited regulator. |
| * |
| * @set_mode: Set the operating mode for the regulator. |
| * @get_mode: Get the current operating mode for the regulator. |
| * @get_optimum_mode: Get the most efficient operating mode for the regulator |
| * when running with the specified parameters. |
| * |
| * @set_suspend_voltage: Set the voltage for the regulator when the system |
| * is suspended. |
| * @set_suspend_enable: Mark the regulator as enabled when the system is |
| * suspended. |
| * @set_suspend_disable: Mark the regulator as disabled when the system is |
| * suspended. |
| * @set_suspend_mode: Set the operating mode for the regulator when the |
| * system is suspended. |
| */ |
| struct regulator_ops { |
| |
| /* get/set regulator voltage */ |
| int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV); |
| int (*get_voltage) (struct regulator_dev *); |
| |
| /* get/set regulator current */ |
| int (*set_current_limit) (struct regulator_dev *, |
| int min_uA, int max_uA); |
| int (*get_current_limit) (struct regulator_dev *); |
| |
| /* enable/disable regulator */ |
| int (*enable) (struct regulator_dev *); |
| int (*disable) (struct regulator_dev *); |
| int (*is_enabled) (struct regulator_dev *); |
| |
| /* get/set regulator operating mode (defined in regulator.h) */ |
| int (*set_mode) (struct regulator_dev *, unsigned int mode); |
| unsigned int (*get_mode) (struct regulator_dev *); |
| |
| /* get most efficient regulator operating mode for load */ |
| unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV, |
| int output_uV, int load_uA); |
| |
| /* the operations below are for configuration of regulator state when |
| * its parent PMIC enters a global STANDBY/HIBERNATE state */ |
| |
| /* set regulator suspend voltage */ |
| int (*set_suspend_voltage) (struct regulator_dev *, int uV); |
| |
| /* enable/disable regulator in suspend state */ |
| int (*set_suspend_enable) (struct regulator_dev *); |
| int (*set_suspend_disable) (struct regulator_dev *); |
| |
| /* set regulator suspend operating mode (defined in regulator.h) */ |
| int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode); |
| }; |
| |
| /* |
| * Regulators can either control voltage or current. |
| */ |
| enum regulator_type { |
| REGULATOR_VOLTAGE, |
| REGULATOR_CURRENT, |
| }; |
| |
| /** |
| * struct regulator_desc - Regulator descriptor |
| * |
| * Each regulator registered with the core is described with a structure of |
| * this type. |
| * |
| * @name: Identifying name for the regulator. |
| * @id: Numerical identifier for the regulator. |
| * @ops: Regulator operations table. |
| * @irq: Interrupt number for the regulator. |
| * @type: Indicates if the regulator is a voltage or current regulator. |
| * @owner: Module providing the regulator, used for refcounting. |
| */ |
| struct regulator_desc { |
| const char *name; |
| int id; |
| struct regulator_ops *ops; |
| int irq; |
| enum regulator_type type; |
| struct module *owner; |
| }; |
| |
| struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, |
| struct device *dev, void *driver_data); |
| void regulator_unregister(struct regulator_dev *rdev); |
| |
| int regulator_notifier_call_chain(struct regulator_dev *rdev, |
| unsigned long event, void *data); |
| |
| void *rdev_get_drvdata(struct regulator_dev *rdev); |
| struct device *rdev_get_dev(struct regulator_dev *rdev); |
| int rdev_get_id(struct regulator_dev *rdev); |
| |
| void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data); |
| |
| #endif |