iwlwifi: calibration command namespace renaming
Since calibration framework is not HW specific remove 5000 and 4965 prefix
This patch doesn't provide any functional changes only code renaming
and movement
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 8f8734f..56964ee 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -2875,36 +2875,25 @@
* 1-0: amount of gain, units of 1.5 dB
*/
-/* "Differential Gain" opcode used in REPLY_PHY_CALIBRATION_CMD. */
-#define PHY_CALIBRATE_DIFF_GAIN_CMD (7)
-
-struct iwl4965_calibration_cmd {
- u8 opCode; /* PHY_CALIBRATE_DIFF_GAIN_CMD (7) */
- u8 flags; /* not used */
- __le16 reserved;
- s8 diff_gain_a; /* see above */
- s8 diff_gain_b;
- s8 diff_gain_c;
- u8 reserved1;
-} __attribute__ ((packed));
-
-/* Phy calibration command for 5000 series */
+/* Phy calibration command for series */
enum {
- IWL5000_PHY_CALIBRATE_DC_CMD = 8,
- IWL5000_PHY_CALIBRATE_LO_CMD = 9,
- IWL5000_PHY_CALIBRATE_RX_BB_CMD = 10,
- IWL5000_PHY_CALIBRATE_TX_IQ_CMD = 11,
- IWL5000_PHY_CALIBRATE_RX_IQ_CMD = 12,
- IWL5000_PHY_CALIBRATION_NOISE_CMD = 13,
- IWL5000_PHY_CALIBRATE_AGC_TABLE_CMD = 14,
- IWL5000_PHY_CALIBRATE_CRYSTAL_FRQ_CMD = 15,
- IWL5000_PHY_CALIBRATE_BASE_BAND_CMD = 16,
- IWL5000_PHY_CALIBRATE_TX_IQ_PERD_CMD = 17,
- IWL5000_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD = 18,
- IWL5000_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD = 19,
+ IWL_PHY_CALIBRATE_DIFF_GAIN_CMD = 7,
+ IWL_PHY_CALIBRATE_DC_CMD = 8,
+ IWL_PHY_CALIBRATE_LO_CMD = 9,
+ IWL_PHY_CALIBRATE_RX_BB_CMD = 10,
+ IWL_PHY_CALIBRATE_TX_IQ_CMD = 11,
+ IWL_PHY_CALIBRATE_RX_IQ_CMD = 12,
+ IWL_PHY_CALIBRATION_NOISE_CMD = 13,
+ IWL_PHY_CALIBRATE_AGC_TABLE_CMD = 14,
+ IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD = 15,
+ IWL_PHY_CALIBRATE_BASE_BAND_CMD = 16,
+ IWL_PHY_CALIBRATE_TX_IQ_PERD_CMD = 17,
+ IWL_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD = 18,
+ IWL_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD = 19,
};
+
struct iwl_cal_xtal_freq {
u8 cap_pin1;
u8 cap_pin2;
@@ -2926,32 +2915,44 @@
__le32 flags;
} __attribute__ ((packed));
-struct iwl5000_calib_cfg_cmd {
+struct iwl_calib_cfg_cmd {
struct iwl_calib_cfg_status_s ucd_calib_cfg;
struct iwl_calib_cfg_status_s drv_calib_cfg;
__le32 reserved1;
} __attribute__ ((packed));
-struct iwl5000_calib_hdr {
+struct iwl_calib_hdr {
u8 op_code;
u8 first_group;
u8 groups_num;
u8 data_valid;
} __attribute__ ((packed));
-struct iwl5000_calib_cmd {
- struct iwl5000_calib_hdr hdr;
+struct iwl_calib_cmd {
+ struct iwl_calib_hdr hdr;
u8 data[0];
} __attribute__ ((packed));
-struct iwl5000_calibration_chain_noise_reset_cmd {
- u8 op_code; /* IWL5000_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD */
+/* "Differential Gain" opcode used in REPLY_PHY_CALIBRATION_CMD. */
+
+struct iwl_calib_diff_gain_cmd {
+ u8 opCode; /* IWL_PHY_CALIBRATE_DIFF_GAIN_CMD (7) */
+ u8 flags; /* not used */
+ __le16 reserved;
+ s8 diff_gain_a; /* see above */
+ s8 diff_gain_b;
+ s8 diff_gain_c;
+ u8 reserved1;
+} __attribute__ ((packed));
+
+struct iwl_calib_chain_noise_reset_cmd {
+ u8 op_code; /* IWL_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD */
u8 flags; /* not used */
__le16 reserved;
} __attribute__ ((packed));
-struct iwl5000_calibration_chain_noise_gain_cmd {
- u8 op_code; /* IWL5000_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD */
+struct iwl_calib_chain_noise_gain_cmd {
+ u8 op_code; /* IWL_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD */
u8 flags; /* not used */
__le16 reserved;
u8 delta_gain_1;