| /* |
| * Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater) |
| * 1-Cell Li-Ion Charger connected via GPIOs. |
| * |
| * Copyright (c) 2008 Philipp Zabel |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/err.h> |
| #include <linux/gpio.h> |
| #include <linux/regulator/bq24022.h> |
| #include <linux/regulator/driver.h> |
| |
| |
| static int bq24022_set_current_limit(struct regulator_dev *rdev, |
| int min_uA, int max_uA) |
| { |
| struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev); |
| |
| dev_dbg(rdev_get_dev(rdev), "setting current limit to %s mA\n", |
| max_uA >= 500000 ? "500" : "100"); |
| |
| /* REVISIT: maybe return error if min_uA != 0 ? */ |
| gpio_set_value(pdata->gpio_iset2, max_uA >= 500000); |
| return 0; |
| } |
| |
| static int bq24022_get_current_limit(struct regulator_dev *rdev) |
| { |
| struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev); |
| |
| return gpio_get_value(pdata->gpio_iset2) ? 500000 : 100000; |
| } |
| |
| static int bq24022_enable(struct regulator_dev *rdev) |
| { |
| struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev); |
| |
| dev_dbg(rdev_get_dev(rdev), "enabling charger\n"); |
| |
| gpio_set_value(pdata->gpio_nce, 0); |
| return 0; |
| } |
| |
| static int bq24022_disable(struct regulator_dev *rdev) |
| { |
| struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev); |
| |
| dev_dbg(rdev_get_dev(rdev), "disabling charger\n"); |
| |
| gpio_set_value(pdata->gpio_nce, 1); |
| return 0; |
| } |
| |
| static int bq24022_is_enabled(struct regulator_dev *rdev) |
| { |
| struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev); |
| |
| return !gpio_get_value(pdata->gpio_nce); |
| } |
| |
| static struct regulator_ops bq24022_ops = { |
| .set_current_limit = bq24022_set_current_limit, |
| .get_current_limit = bq24022_get_current_limit, |
| .enable = bq24022_enable, |
| .disable = bq24022_disable, |
| .is_enabled = bq24022_is_enabled, |
| }; |
| |
| static struct regulator_desc bq24022_desc = { |
| .name = "bq24022", |
| .ops = &bq24022_ops, |
| .type = REGULATOR_CURRENT, |
| }; |
| |
| static int __init bq24022_probe(struct platform_device *pdev) |
| { |
| struct bq24022_mach_info *pdata = pdev->dev.platform_data; |
| struct regulator_dev *bq24022; |
| int ret; |
| |
| if (!pdata || !pdata->gpio_nce || !pdata->gpio_iset2) |
| return -EINVAL; |
| |
| ret = gpio_request(pdata->gpio_nce, "ncharge_en"); |
| if (ret) { |
| dev_dbg(&pdev->dev, "couldn't request nCE GPIO: %d\n", |
| pdata->gpio_nce); |
| goto err_ce; |
| } |
| ret = gpio_request(pdata->gpio_iset2, "charge_mode"); |
| if (ret) { |
| dev_dbg(&pdev->dev, "couldn't request ISET2 GPIO: %d\n", |
| pdata->gpio_iset2); |
| goto err_iset2; |
| } |
| ret = gpio_direction_output(pdata->gpio_iset2, 0); |
| ret = gpio_direction_output(pdata->gpio_nce, 1); |
| |
| bq24022 = regulator_register(&bq24022_desc, &pdev->dev, |
| pdata->init_data, pdata); |
| if (IS_ERR(bq24022)) { |
| dev_dbg(&pdev->dev, "couldn't register regulator\n"); |
| ret = PTR_ERR(bq24022); |
| goto err_reg; |
| } |
| platform_set_drvdata(pdev, bq24022); |
| dev_dbg(&pdev->dev, "registered regulator\n"); |
| |
| return 0; |
| err_reg: |
| gpio_free(pdata->gpio_iset2); |
| err_iset2: |
| gpio_free(pdata->gpio_nce); |
| err_ce: |
| return ret; |
| } |
| |
| static int __devexit bq24022_remove(struct platform_device *pdev) |
| { |
| struct bq24022_mach_info *pdata = pdev->dev.platform_data; |
| struct regulator_dev *bq24022 = platform_get_drvdata(pdev); |
| |
| regulator_unregister(bq24022); |
| gpio_free(pdata->gpio_iset2); |
| gpio_free(pdata->gpio_nce); |
| |
| return 0; |
| } |
| |
| static struct platform_driver bq24022_driver = { |
| .driver = { |
| .name = "bq24022", |
| }, |
| .remove = __devexit_p(bq24022_remove), |
| }; |
| |
| static int __init bq24022_init(void) |
| { |
| return platform_driver_probe(&bq24022_driver, bq24022_probe); |
| } |
| |
| static void __exit bq24022_exit(void) |
| { |
| platform_driver_unregister(&bq24022_driver); |
| } |
| |
| module_init(bq24022_init); |
| module_exit(bq24022_exit); |
| |
| MODULE_AUTHOR("Philipp Zabel"); |
| MODULE_DESCRIPTION("TI bq24022 Li-Ion Charger driver"); |
| MODULE_LICENSE("GPL"); |