ASoC: Add s3c64xx-i2s support
Add the initial code to support the S3C64XX I2S hardware using the
s3c-i2s-v2 core code.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
index 25d4058..a5600b3 100644
--- a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
+++ b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
@@ -33,6 +33,9 @@
#define S3C2412_IISCON_RXDMA_ACTIVE (1 << 1)
#define S3C2412_IISCON_IIS_ACTIVE (1 << 0)
+#define S3C64XX_IISMOD_IMS_PCLK (0 << 10)
+#define S3C64XX_IISMOD_IMS_SYSMUX (1 << 10)
+
#define S3C2412_IISMOD_MASTER_INTERNAL (0 << 10)
#define S3C2412_IISMOD_MASTER_EXTERNAL (1 << 10)
#define S3C2412_IISMOD_SLAVE (2 << 10)
diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index bd98ada..036a496 100644
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -1,6 +1,6 @@
config SND_S3C24XX_SOC
tristate "SoC Audio for the Samsung S3C24XX chips"
- depends on ARCH_S3C2410
+ depends on ARCH_S3C2410 || ARCH_S3C64XX
help
Say Y or M if you want to add support for codecs attached to
the S3C24XX AC97, I2S or SSP interface. You will also need
@@ -16,6 +16,10 @@
tristate
select SND_S3C_I2SV2_SOC
+config SND_S3C64XX_SOC_I2S
+ tristate
+ select SND_S3C_I2SV2_SOC
+
config SND_S3C2443_SOC_AC97
tristate
select AC97_BUS
diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile
index 848981e..07a93a2 100644
--- a/sound/soc/s3c24xx/Makefile
+++ b/sound/soc/s3c24xx/Makefile
@@ -2,6 +2,7 @@
snd-soc-s3c24xx-objs := s3c24xx-pcm.o
snd-soc-s3c24xx-i2s-objs := s3c24xx-i2s.o
snd-soc-s3c2412-i2s-objs := s3c2412-i2s.o
+snd-soc-s3c64xx-i2s-objs := s3c64xx-i2s.o
snd-soc-s3c2443-ac97-objs := s3c2443-ac97.o
snd-soc-s3c-i2s-v2-objs := s3c-i2s-v2.o
@@ -9,6 +10,7 @@
obj-$(CONFIG_SND_S3C24XX_SOC_I2S) += snd-soc-s3c24xx-i2s.o
obj-$(CONFIG_SND_S3C2443_SOC_AC97) += snd-soc-s3c2443-ac97.o
obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd-soc-s3c2412-i2s.o
+obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += snd-soc-s3c64xx-i2s.o
obj-$(CONFIG_SND_S3C_I2SV2_SOC) += snd-soc-s3c-i2s-v2.o
# S3C24XX Machine Support
diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.c b/sound/soc/s3c24xx/s3c64xx-i2s.c
new file mode 100644
index 0000000..6e1e85d
--- /dev/null
+++ b/sound/soc/s3c24xx/s3c64xx-i2s.c
@@ -0,0 +1,220 @@
+/* sound/soc/s3c24xx/s3c64xx-i2s.c
+ *
+ * ALSA SoC Audio Layer - S3C64XX I2S driver
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include <plat/regs-s3c2412-iis.h>
+#include <plat/gpio-bank-d.h>
+#include <plat/gpio-bank-e.h>
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/map.h>
+#include <mach/dma.h>
+
+#include "s3c24xx-pcm.h"
+#include "s3c64xx-i2s.h"
+
+static struct s3c2410_dma_client s3c64xx_dma_client_out = {
+ .name = "I2S PCM Stereo out"
+};
+
+static struct s3c2410_dma_client s3c64xx_dma_client_in = {
+ .name = "I2S PCM Stereo in"
+};
+
+static struct s3c24xx_pcm_dma_params s3c64xx_i2s_pcm_stereo_out[2] = {
+ [0] = {
+ .channel = DMACH_I2S0_OUT,
+ .client = &s3c64xx_dma_client_out,
+ .dma_addr = S3C64XX_PA_IIS0 + S3C2412_IISTXD,
+ .dma_size = 4,
+ },
+ [1] = {
+ .channel = DMACH_I2S1_OUT,
+ .client = &s3c64xx_dma_client_out,
+ .dma_addr = S3C64XX_PA_IIS1 + S3C2412_IISTXD,
+ .dma_size = 4,
+ },
+};
+
+static struct s3c24xx_pcm_dma_params s3c64xx_i2s_pcm_stereo_in[2] = {
+ [0] = {
+ .channel = DMACH_I2S0_IN,
+ .client = &s3c64xx_dma_client_in,
+ .dma_addr = S3C64XX_PA_IIS0 + S3C2412_IISRXD,
+ .dma_size = 4,
+ },
+ [1] = {
+ .channel = DMACH_I2S1_IN,
+ .client = &s3c64xx_dma_client_in,
+ .dma_addr = S3C64XX_PA_IIS1 + S3C2412_IISRXD,
+ .dma_size = 4,
+ },
+};
+
+static struct s3c_i2sv2_info s3c64xx_i2s[2];
+
+static inline struct s3c_i2sv2_info *to_info(struct snd_soc_dai *cpu_dai)
+{
+ return cpu_dai->private_data;
+}
+
+static int s3c64xx_i2s_set_sysclk(struct snd_soc_dai *cpu_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct s3c_i2sv2_info *i2s = to_info(cpu_dai);
+ u32 iismod = readl(i2s->regs + S3C2412_IISMOD);
+
+ switch (clk_id) {
+ case S3C64XX_CLKSRC_PCLK:
+ iismod &= ~S3C64XX_IISMOD_IMS_SYSMUX;
+ break;
+
+ case S3C64XX_CLKSRC_MUX:
+ iismod |= S3C64XX_IISMOD_IMS_SYSMUX;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ writel(iismod, i2s->regs + S3C2412_IISMOD);
+
+ return 0;
+}
+
+
+unsigned long s3c64xx_i2s_get_clockrate(struct snd_soc_dai *dai)
+{
+ struct s3c_i2sv2_info *i2s = to_info(dai);
+
+ return clk_get_rate(i2s->iis_cclk);
+}
+EXPORT_SYMBOL_GPL(s3c64xx_i2s_get_clockrate);
+
+static int s3c64xx_i2s_probe(struct platform_device *pdev,
+ struct snd_soc_dai *dai)
+{
+ struct device *dev = &pdev->dev;
+ struct s3c_i2sv2_info *i2s;
+ int ret;
+
+ dev_dbg(dev, "%s: probing dai %d\n", __func__, pdev->id);
+
+ if (pdev->id < 0 || pdev->id > ARRAY_SIZE(s3c64xx_i2s)) {
+ dev_err(dev, "id %d out of range\n", pdev->id);
+ return -EINVAL;
+ }
+
+ i2s = &s3c64xx_i2s[pdev->id];
+
+ ret = s3c_i2sv2_probe(pdev, dai, i2s,
+ pdev->id ? S3C64XX_PA_IIS1 : S3C64XX_PA_IIS0);
+ if (ret)
+ return ret;
+
+ i2s->dma_capture = &s3c64xx_i2s_pcm_stereo_in[pdev->id];
+ i2s->dma_playback = &s3c64xx_i2s_pcm_stereo_out[pdev->id];
+
+ i2s->iis_cclk = clk_get(dev, "audio-bus");
+ if (IS_ERR(i2s->iis_cclk)) {
+ dev_err(dev, "failed to get audio-bus");
+ iounmap(i2s->regs);
+ return -ENODEV;
+ }
+
+ /* configure GPIO for i2s port */
+ switch (pdev->id) {
+ case 0:
+ s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_I2S0_CLK);
+ s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_I2S0_CDCLK);
+ s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_I2S0_LRCLK);
+ s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_I2S0_DI);
+ s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_I2S0_D0);
+ break;
+ case 1:
+ s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_I2S1_CLK);
+ s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_I2S1_CDCLK);
+ s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_I2S1_LRCLK);
+ s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_I2S1_DI);
+ s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_I2S1_D0);
+ }
+
+ return 0;
+}
+
+
+#define S3C64XX_I2S_RATES \
+ (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
+ SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
+
+#define S3C64XX_I2S_FMTS \
+ (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE)
+
+struct snd_soc_dai s3c64xx_i2s_dai = {
+ .name = "s3c64xx-i2s",
+ .id = 0,
+ .probe = s3c64xx_i2s_probe,
+ .playback = {
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = S3C64XX_I2S_RATES,
+ .formats = S3C64XX_I2S_FMTS,
+ },
+ .capture = {
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = S3C64XX_I2S_RATES,
+ .formats = S3C64XX_I2S_FMTS,
+ },
+ .ops = {
+ .set_sysclk = s3c64xx_i2s_set_sysclk,
+ },
+};
+EXPORT_SYMBOL_GPL(s3c64xx_i2s_dai);
+
+static int __init s3c64xx_i2s_init(void)
+{
+ return s3c_i2sv2_register_dai(&s3c64xx_i2s_dai);
+}
+module_init(s3c64xx_i2s_init);
+
+static void __exit s3c64xx_i2s_exit(void)
+{
+ snd_soc_unregister_dai(&s3c64xx_i2s_dai);
+}
+module_exit(s3c64xx_i2s_exit);
+
+/* Module information */
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("S3C64XX I2S SoC Interface");
+MODULE_LICENSE("GPL");
+
+
+
diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.h b/sound/soc/s3c24xx/s3c64xx-i2s.h
new file mode 100644
index 0000000..b7ffe3c
--- /dev/null
+++ b/sound/soc/s3c24xx/s3c64xx-i2s.h
@@ -0,0 +1,31 @@
+/* sound/soc/s3c24xx/s3c64xx-i2s.h
+ *
+ * ALSA SoC Audio Layer - S3C64XX I2S driver
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SND_SOC_S3C24XX_S3C64XX_I2S_H
+#define __SND_SOC_S3C24XX_S3C64XX_I2S_H __FILE__
+
+#include "s3c-i2s-v2.h"
+
+#define S3C64XX_DIV_BCLK S3C_I2SV2_DIV_BCLK
+#define S3C64XX_DIV_RCLK S3C_I2SV2_DIV_RCLK
+#define S3C64XX_DIV_PRESCALER S3C_I2SV2_DIV_PRESCALER
+
+#define S3C64XX_CLKSRC_PCLK (0)
+#define S3C64XX_CLKSRC_MUX (1)
+
+extern struct snd_soc_dai s3c64xx_i2s_dai;
+
+extern unsigned long s3c64xx_i2s_get_clockrate(struct snd_soc_dai *cpu_dai);
+
+#endif /* __SND_SOC_S3C24XX_S3C64XX_I2S_H */