diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 1b73508..2cbde86 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -37,7 +37,7 @@
 #include <asm/prom.h>
 #include <asm/vdso_datapage.h>
 
-#define MODULE_VERS "1.6"
+#define MODULE_VERS "1.7"
 #define MODULE_NAME "lparcfg"
 
 /* #define LPARCFG_DEBUG */
@@ -149,17 +149,17 @@
 	if (rc == 0)		/* success, return */
 		return;
 /* check for null tag ? */
-	if (rc == H_Hardware)
+	if (rc == H_HARDWARE)
 		printk(KERN_INFO
 		       "plpar-hcall (%s) failed with hardware fault\n", tag);
-	else if (rc == H_Function)
+	else if (rc == H_FUNCTION)
 		printk(KERN_INFO
 		       "plpar-hcall (%s) failed; function not allowed\n", tag);
-	else if (rc == H_Authority)
+	else if (rc == H_AUTHORITY)
 		printk(KERN_INFO
-		       "plpar-hcall (%s) failed; not authorized to this function\n",
-		       tag);
-	else if (rc == H_Parameter)
+		       "plpar-hcall (%s) failed; not authorized to this"
+		       " function\n", tag);
+	else if (rc == H_PARAMETER)
 		printk(KERN_INFO "plpar-hcall (%s) failed; Bad parameter(s)\n",
 		       tag);
 	else
@@ -209,7 +209,7 @@
 	unsigned long dummy;
 	rc = plpar_hcall(H_PIC, 0, 0, 0, 0, pool_idle_time, num_procs, &dummy);
 
-	if (rc != H_Authority)
+	if (rc != H_AUTHORITY)
 		log_plpar_hcall_return(rc, "H_PIC");
 }
 
@@ -242,7 +242,7 @@
 {
 	int call_status;
 
-	char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
+	unsigned char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
 	if (!local_buffer) {
 		printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
 		       __FILE__, __FUNCTION__, __LINE__);
@@ -254,7 +254,8 @@
 	call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
 				NULL,
 				SPLPAR_CHARACTERISTICS_TOKEN,
-				__pa(rtas_data_buf));
+				__pa(rtas_data_buf),
+				RTAS_DATA_BUF_SIZE);
 	memcpy(local_buffer, rtas_data_buf, SPLPAR_MAXLENGTH);
 	spin_unlock(&rtas_data_buf_lock);
 
@@ -275,7 +276,7 @@
 #ifdef LPARCFG_DEBUG
 		printk(KERN_INFO "success calling get-system-parameter \n");
 #endif
-		splpar_strlen = local_buffer[0] * 16 + local_buffer[1];
+		splpar_strlen = local_buffer[0] * 256 + local_buffer[1];
 		local_buffer += 2;	/* step over strlen value */
 
 		memset(workbuffer, 0, SPLPAR_MAXLENGTH);
@@ -529,13 +530,13 @@
 	retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,
 				    *new_weight_ptr);
 
-	if (retval == H_Success || retval == H_Constrained) {
+	if (retval == H_SUCCESS || retval == H_CONSTRAINED) {
 		retval = count;
-	} else if (retval == H_Busy) {
+	} else if (retval == H_BUSY) {
 		retval = -EBUSY;
-	} else if (retval == H_Hardware) {
+	} else if (retval == H_HARDWARE) {
 		retval = -EIO;
-	} else if (retval == H_Parameter) {
+	} else if (retval == H_PARAMETER) {
 		retval = -EINVAL;
 	} else {
 		printk(KERN_WARNING "%s: received unknown hv return code %ld",
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 06636c9..0112318 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -578,18 +578,18 @@
 	 * We use "waiting" to indicate our state.  As long
 	 * as it is >0, we are still trying to all join up.
 	 * If it goes to 0, we have successfully joined up and
-	 * one thread got H_Continue.  If any error happens,
+	 * one thread got H_CONTINUE.  If any error happens,
 	 * we set it to <0.
 	 */
 	local_irq_save(flags);
 	do {
 		rc = plpar_hcall_norets(H_JOIN);
 		smp_rmb();
-	} while (rc == H_Success && data->waiting > 0);
-	if (rc == H_Success)
+	} while (rc == H_SUCCESS && data->waiting > 0);
+	if (rc == H_SUCCESS)
 		goto out;
 
-	if (rc == H_Continue) {
+	if (rc == H_CONTINUE) {
 		data->waiting = 0;
 		data->args->args[data->args->nargs] =
 			rtas_call(ibm_suspend_me_token, 0, 1, NULL);
@@ -597,7 +597,7 @@
 			plpar_hcall_norets(H_PROD,i);
 	} else {
 		data->waiting = -EBUSY;
-		printk(KERN_ERR "Error on H_Join hypervisor call\n");
+		printk(KERN_ERR "Error on H_JOIN hypervisor call\n");
 	}
 
 out:
@@ -624,7 +624,7 @@
 		printk(KERN_ERR "Error doing global join\n");
 
 	/* Prod each CPU.  This won't hurt, and will wake
-	 * anyone we successfully put to sleep with H_Join
+	 * anyone we successfully put to sleep with H_JOIN.
 	 */
 	for_each_possible_cpu(i)
 		plpar_hcall_norets(H_PROD, i);
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index a72bf5d..69ac257 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -50,7 +50,6 @@
 #include <asm/kgdb.h>
 #endif
 
-extern void platform_init(void);
 extern void bootx_init(unsigned long r4, unsigned long phys);
 
 boot_infos_t *boot_infos;
@@ -138,12 +137,7 @@
 		strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
 #endif /* CONFIG_CMDLINE */
 
-#ifdef CONFIG_PPC_MULTIPLATFORM
 	probe_machine();
-#else
-	/* Base init based on machine type. Obsoloete, please kill ! */
-	platform_init();
-#endif
 
 #ifdef CONFIG_6xx
 	if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 59aa92c..13e91c4 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -215,12 +215,10 @@
 	/*
 	 * Initialize stab / SLB management except on iSeries
 	 */
-	if (!firmware_has_feature(FW_FEATURE_ISERIES)) {
-		if (cpu_has_feature(CPU_FTR_SLB))
-			slb_initialize();
-		else
-			stab_initialize(get_paca()->stab_real);
-	}
+	if (cpu_has_feature(CPU_FTR_SLB))
+		slb_initialize();
+	else if (!firmware_has_feature(FW_FEATURE_ISERIES))
+		stab_initialize(get_paca()->stab_real);
 
 	DBG(" <- early_setup()\n");
 }
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 4cbde21..064a525 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -228,7 +228,7 @@
  */
 static inline int check_io_access(struct pt_regs *regs)
 {
-#ifdef CONFIG_PPC_PMAC
+#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)
 	unsigned long msr = regs->msr;
 	const struct exception_table_entry *entry;
 	unsigned int *nip = (unsigned int *)regs->nip;
@@ -261,7 +261,7 @@
 			return 1;
 		}
 	}
-#endif /* CONFIG_PPC_PMAC */
+#endif /* CONFIG_PPC_PMAC && CONFIG_PPC32 */
 	return 0;
 }
 
@@ -308,8 +308,8 @@
 
 void machine_check_exception(struct pt_regs *regs)
 {
-#ifdef CONFIG_PPC64
 	int recover = 0;
+	unsigned long reason = get_mc_reason(regs);
 
 	/* See if any machine dependent calls */
 	if (ppc_md.machine_check_exception)
@@ -317,8 +317,6 @@
 
 	if (recover)
 		return;
-#else
-	unsigned long reason = get_mc_reason(regs);
 
 	if (user_mode(regs)) {
 		regs->msr |= MSR_RI;
@@ -462,7 +460,6 @@
 	 * additional info, e.g. bus error registers.
 	 */
 	platform_machine_check(regs);
-#endif /* CONFIG_PPC64 */
 
 	if (debugger_fault_handler(regs))
 		return;
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 5aea090..fdbba42 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -177,15 +177,15 @@
 
 	/* When running in the kernel we expect faults to occur only to
 	 * addresses in user space.  All other faults represent errors in the
-	 * kernel and should generate an OOPS.  Unfortunatly, in the case of an
-	 * erroneous fault occuring in a code path which already holds mmap_sem
+	 * kernel and should generate an OOPS.  Unfortunately, in the case of an
+	 * erroneous fault occurring in a code path which already holds mmap_sem
 	 * we will deadlock attempting to validate the fault against the
 	 * address space.  Luckily the kernel only validly references user
 	 * space from well defined areas of code, which are listed in the
 	 * exceptions table.
 	 *
 	 * As the vast majority of faults will be valid we will only perform
-	 * the source reference check when there is a possibilty of a deadlock.
+	 * the source reference check when there is a possibility of a deadlock.
 	 * Attempt to lock the address space, if we cannot we then validate the
 	 * source.  If this is invalid we can skip the address space check,
 	 * thus avoiding the deadlock.
diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_sys.c
index 7c18b4c..7e789d2 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_sys.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_sys.c
@@ -158,25 +158,25 @@
 late_initcall(mpc834x_rtc_hookup);
 #endif
 
-void __init platform_init(void)
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc834x_sys_probe(void)
 {
-	/* setup the PowerPC module struct */
-	ppc_md.setup_arch = mpc834x_sys_setup_arch;
-
-	ppc_md.init_IRQ = mpc834x_sys_init_IRQ;
-	ppc_md.get_irq = ipic_get_irq;
-
-	ppc_md.restart = mpc83xx_restart;
-
-	ppc_md.time_init = mpc83xx_time_init;
-	ppc_md.set_rtc_time = NULL;
-	ppc_md.get_rtc_time = NULL;
-	ppc_md.calibrate_decr = generic_calibrate_decr;
-
-	ppc_md.progress = udbg_progress;
-
-	if (ppc_md.progress)
-		ppc_md.progress("mpc834x_sys_init(): exit", 0);
-
-	return;
+	/* We always match for now, eventually we should look at the flat
+	   dev tree to ensure this is the board we are suppose to run on
+	*/
+	return 1;
 }
+
+define_machine(mpc834x_sys) {
+	.name			= "MPC834x SYS",
+	.probe			= mpc834x_sys_probe,
+	.setup_arch		= mpc834x_sys_setup_arch,
+	.init_IRQ		= mpc834x_sys_init_IRQ,
+	.get_irq		= ipic_get_irq,
+	.restart		= mpc83xx_restart,
+	.time_init		= mpc83xx_time_init,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index b7821db..5eeff37 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -220,25 +220,25 @@
 	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
 
-void __init platform_init(void)
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mpc85xx_ads_probe(void)
 {
-	ppc_md.setup_arch = mpc85xx_ads_setup_arch;
-	ppc_md.show_cpuinfo = mpc85xx_ads_show_cpuinfo;
-
-	ppc_md.init_IRQ = mpc85xx_ads_pic_init;
-	ppc_md.get_irq = mpic_get_irq;
-
-	ppc_md.restart = mpc85xx_restart;
-	ppc_md.power_off = NULL;
-	ppc_md.halt = NULL;
-
-	ppc_md.time_init = NULL;
-	ppc_md.set_rtc_time = NULL;
-	ppc_md.get_rtc_time = NULL;
-	ppc_md.calibrate_decr = generic_calibrate_decr;
-
-	ppc_md.progress = udbg_progress;
-
-	if (ppc_md.progress)
-		ppc_md.progress("mpc85xx_ads platform_init(): exit", 0);
+	/* We always match for now, eventually we should look at the flat
+	   dev tree to ensure this is the board we are suppose to run on
+	*/
+	return 1;
 }
+
+define_machine(mpc85xx_ads) {
+	.name			= "MPC85xx ADS",
+	.probe			= mpc85xx_ads_probe,
+	.setup_arch		= mpc85xx_ads_setup_arch,
+	.init_IRQ		= mpc85xx_ads_pic_init,
+	.show_cpuinfo		= mpc85xx_ads_show_cpuinfo,
+	.get_irq		= mpic_get_irq,
+	.restart		= mpc85xx_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c
index 3a4245c..6594bec 100644
--- a/arch/powerpc/platforms/cell/spu_callbacks.c
+++ b/arch/powerpc/platforms/cell/spu_callbacks.c
@@ -316,6 +316,7 @@
 	[__NR_pselect6]			sys_ni_syscall, /* sys_pselect */
 	[__NR_ppoll]			sys_ni_syscall, /* sys_ppoll */
 	[__NR_unshare]			sys_unshare,
+	[__NR_splice]			sys_splice,
 };
 
 long spu_sys_callback(struct spu_syscall_block *s)
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index c04e078..483c8b7 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -2,6 +2,7 @@
 #include <linux/ptrace.h>
 
 #include <asm/spu.h>
+#include <asm/unistd.h>
 
 #include "spufs.h"
 
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 9b2b1cb..780fb27 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -865,7 +865,7 @@
  * on the CEC architecture, type of the device, on earlier boot
  * command-line arguments & etc.
  */
-void eeh_add_device_early(struct device_node *dn)
+static void eeh_add_device_early(struct device_node *dn)
 {
 	struct pci_controller *phb;
 	struct eeh_early_enable_info info;
@@ -882,7 +882,6 @@
 	info.buid_lo = BUID_LO(phb->buid);
 	early_enable_eeh(dn, &info);
 }
-EXPORT_SYMBOL_GPL(eeh_add_device_early);
 
 void eeh_add_device_tree_early(struct device_node *dn)
 {
@@ -893,20 +892,6 @@
 }
 EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
 
-void eeh_add_device_tree_late(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-
-	list_for_each_entry(dev, &bus->devices, bus_list) {
- 		eeh_add_device_late(dev);
- 		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- 			struct pci_bus *subbus = dev->subordinate;
- 			if (subbus)
- 				eeh_add_device_tree_late(subbus);
- 		}
-	}
-}
-
 /**
  * eeh_add_device_late - perform EEH initialization for the indicated pci device
  * @dev: pci device for which to set up EEH
@@ -914,7 +899,7 @@
  * This routine must be used to complete EEH initialization for PCI
  * devices that were added after system boot (e.g. hotplug, dlpar).
  */
-void eeh_add_device_late(struct pci_dev *dev)
+static void eeh_add_device_late(struct pci_dev *dev)
 {
 	struct device_node *dn;
 	struct pci_dn *pdn;
@@ -933,16 +918,33 @@
 
 	pci_addr_cache_insert_device (dev);
 }
-EXPORT_SYMBOL_GPL(eeh_add_device_late);
+
+void eeh_add_device_tree_late(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+ 		eeh_add_device_late(dev);
+ 		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ 			struct pci_bus *subbus = dev->subordinate;
+ 			if (subbus)
+ 				eeh_add_device_tree_late(subbus);
+ 		}
+	}
+}
+EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
 
 /**
  * eeh_remove_device - undo EEH setup for the indicated pci device
  * @dev: pci device to be removed
  *
- * This routine should be when a device is removed from a running
- * system (e.g. by hotplug or dlpar).
+ * This routine should be called when a device is removed from
+ * a running system (e.g. by hotplug or dlpar).  It unregisters
+ * the PCI device from the EEH subsystem.  I/O errors affecting
+ * this device will no longer be detected after this call; thus,
+ * i/o errors affecting this slot may leave this device unusable.
  */
-void eeh_remove_device(struct pci_dev *dev)
+static void eeh_remove_device(struct pci_dev *dev)
 {
 	struct device_node *dn;
 	if (!dev || !eeh_subsystem_enabled)
@@ -958,21 +960,17 @@
 	PCI_DN(dn)->pcidev = NULL;
 	pci_dev_put (dev);
 }
-EXPORT_SYMBOL_GPL(eeh_remove_device);
 
 void eeh_remove_bus_device(struct pci_dev *dev)
 {
+	struct pci_bus *bus = dev->subordinate;
+	struct pci_dev *child, *tmp;
+
 	eeh_remove_device(dev);
-	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-		struct pci_bus *bus = dev->subordinate;
-		struct list_head *ln;
-		if (!bus)
-			return; 
-		for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
-			struct pci_dev *pdev = pci_dev_b(ln);
-			if (pdev)
-				eeh_remove_bus_device(pdev);
-		}
+
+	if (bus && dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+		list_for_each_entry_safe(child, tmp, &bus->devices, bus_list)
+			 eeh_remove_bus_device(child);
 	}
 }
 EXPORT_SYMBOL_GPL(eeh_remove_bus_device);
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index cc2495a..1fba695 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -293,15 +293,16 @@
 	frozen_pdn = PCI_DN(frozen_dn);
 	frozen_pdn->eeh_freeze_count++;
 
-	pci_str = pci_name (frozen_pdn->pcidev);
-	drv_str = pcid_name (frozen_pdn->pcidev);
-	if (!pci_str) {
+	if (frozen_pdn->pcidev) {
+		pci_str = pci_name (frozen_pdn->pcidev);
+		drv_str = pcid_name (frozen_pdn->pcidev);
+	} else {
 		pci_str = pci_name (event->dev);
 		drv_str = pcid_name (event->dev);
 	}
 	
 	if (frozen_pdn->eeh_freeze_count > EEH_MAX_ALLOWED_FREEZES)
-		goto hard_fail;
+		goto excess_failures;
 
 	/* If the reset state is a '5' and the time to reset is 0 (infinity)
 	 * or is more then 15 seconds, then mark this as a permanent failure.
@@ -356,7 +357,7 @@
 
 	return;
 	
-hard_fail:
+excess_failures:
 	/*
 	 * About 90% of all real-life EEH failures in the field
 	 * are due to poorly seated PCI cards. Only 10% or so are
@@ -367,7 +368,15 @@
 	   "and has been permanently disabled.  Please try reseating\n"
 	   "this device or replacing it.\n",
 		drv_str, pci_str, frozen_pdn->eeh_freeze_count);
+	goto perm_error;
 
+hard_fail:
+	printk(KERN_ERR
+	   "EEH: Unable to recover from failure of PCI device %s - %s\n"
+	   "Please try reseating this device or replacing it.\n",
+		drv_str, pci_str);
+
+perm_error:
 	eeh_slot_error_detail(frozen_pdn, 2 /* Permanent Error */);
 
 	/* Notify all devices that they're about to go down. */
diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c
index 9a9961f..a1bda6f 100644
--- a/arch/powerpc/platforms/pseries/eeh_event.c
+++ b/arch/powerpc/platforms/pseries/eeh_event.c
@@ -19,7 +19,9 @@
  */
 
 #include <linux/list.h>
+#include <linux/mutex.h>
 #include <linux/pci.h>
+#include <linux/workqueue.h>
 #include <asm/eeh_event.h>
 #include <asm/ppc-pci.h>
 
@@ -37,14 +39,18 @@
 static void eeh_thread_launcher(void *);
 DECLARE_WORK(eeh_event_wq, eeh_thread_launcher, NULL);
 
+/* Serialize reset sequences for a given pci device */
+DEFINE_MUTEX(eeh_event_mutex);
+
 /**
- * eeh_event_handler - dispatch EEH events.  The detection of a frozen
- * slot can occur inside an interrupt, where it can be hard to do
- * anything about it.  The goal of this routine is to pull these
- * detection events out of the context of the interrupt handler, and
- * re-dispatch them for processing at a later time in a normal context.
- *
+ * eeh_event_handler - dispatch EEH events.
  * @dummy - unused
+ *
+ * The detection of a frozen slot can occur inside an interrupt,
+ * where it can be hard to do anything about it.  The goal of this
+ * routine is to pull these detection events out of the context
+ * of the interrupt handler, and re-dispatch them for processing
+ * at a later time in a normal context.
  */
 static int eeh_event_handler(void * dummy)
 {
@@ -64,23 +70,24 @@
 			event = list_entry(eeh_eventlist.next, struct eeh_event, list);
 			list_del(&event->list);
 		}
-		
-		if (event)
-			eeh_mark_slot(event->dn, EEH_MODE_RECOVERING);
-
 		spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
+
 		if (event == NULL)
 			break;
 
+		/* Serialize processing of EEH events */
+		mutex_lock(&eeh_event_mutex);
+		eeh_mark_slot(event->dn, EEH_MODE_RECOVERING);
+
 		printk(KERN_INFO "EEH: Detected PCI bus error on device %s\n",
 		       pci_name(event->dev));
 
 		handle_eeh_events(event);
 
 		eeh_clear_slot(event->dn, EEH_MODE_RECOVERING);
-
 		pci_dev_put(event->dev);
 		kfree(event);
+		mutex_unlock(&eeh_event_mutex);
 	}
 
 	return 0;
@@ -88,7 +95,6 @@
 
 /**
  * eeh_thread_launcher
- *
  * @dummy - unused
  */
 static void eeh_thread_launcher(void *dummy)
diff --git a/arch/powerpc/platforms/pseries/hvCall.S b/arch/powerpc/platforms/pseries/hvCall.S
index db7c19f..c9ff547 100644
--- a/arch/powerpc/platforms/pseries/hvCall.S
+++ b/arch/powerpc/platforms/pseries/hvCall.S
@@ -127,3 +127,103 @@
 
 	mtcrf	0xff,r0
 	blr				/* return r3 = status */
+
+/* plpar_hcall_7arg_7ret(unsigned long opcode,		R3
+			 unsigned long arg1,		R4
+			 unsigned long arg2,		R5
+			 unsigned long arg3,		R6
+			 unsigned long arg4,		R7
+			 unsigned long arg5,		R8
+			 unsigned long arg6,		R9
+			 unsigned long arg7,		R10
+			 unsigned long *out1,		112(R1)
+			 unsigned long *out2,		110(R1)
+			 unsigned long *out3,		108(R1)
+			 unsigned long *out4,		106(R1)
+			 unsigned long *out5,		104(R1)
+			 unsigned long *out6,		102(R1)
+			 unsigned long *out7);		100(R1)
+*/
+_GLOBAL(plpar_hcall_7arg_7ret)
+	HMT_MEDIUM
+
+	mfcr	r0
+	stw	r0,8(r1)
+
+	HVSC				/* invoke the hypervisor */
+
+	lwz	r0,8(r1)
+
+	ld	r11,STK_PARM(r11)(r1)	/* Fetch r4 ret arg */
+	std	r4,0(r11)
+	ld	r11,STK_PARM(r12)(r1)	/* Fetch r5 ret arg */
+	std	r5,0(r11)
+	ld	r11,STK_PARM(r13)(r1)	/* Fetch r6 ret arg */
+	std	r6,0(r11)
+	ld	r11,STK_PARM(r14)(r1)	/* Fetch r7 ret arg */
+	std	r7,0(r11)
+	ld	r11,STK_PARM(r15)(r1)	/* Fetch r8 ret arg */
+	std	r8,0(r11)
+	ld	r11,STK_PARM(r16)(r1)	/* Fetch r9 ret arg */
+	std	r9,0(r11)
+	ld	r11,STK_PARM(r17)(r1)	/* Fetch r10 ret arg */
+	std	r10,0(r11)
+
+	mtcrf	0xff,r0
+
+	blr				/* return r3 = status */
+
+/* plpar_hcall_9arg_9ret(unsigned long opcode,		R3
+			 unsigned long arg1,		R4
+			 unsigned long arg2,		R5
+			 unsigned long arg3,		R6
+			 unsigned long arg4,		R7
+			 unsigned long arg5,		R8
+			 unsigned long arg6,		R9
+			 unsigned long arg7,		R10
+			 unsigned long arg8,		112(R1)
+			 unsigned long arg9,		110(R1)
+			 unsigned long *out1,		108(R1)
+			 unsigned long *out2,		106(R1)
+			 unsigned long *out3,		104(R1)
+			 unsigned long *out4,		102(R1)
+			 unsigned long *out5,		100(R1)
+			 unsigned long *out6,		 98(R1)
+			 unsigned long *out7);		 96(R1)
+			 unsigned long *out8,		 94(R1)
+		         unsigned long *out9,            92(R1)
+*/
+_GLOBAL(plpar_hcall_9arg_9ret)
+	HMT_MEDIUM
+
+	mfcr	r0
+	stw	r0,8(r1)
+
+	ld	r11,STK_PARM(r11)(r1)	 /* put arg8 in R11 */
+	ld	r12,STK_PARM(r12)(r1)    /* put arg9 in R12 */
+
+	HVSC				/* invoke the hypervisor */
+
+	ld	r0,STK_PARM(r13)(r1)	/* Fetch r4 ret arg */
+	stdx	r4,r0,r0
+	ld	r0,STK_PARM(r14)(r1)	/* Fetch r5 ret arg */
+	stdx	r5,r0,r0
+	ld	r0,STK_PARM(r15)(r1)	/* Fetch r6 ret arg */
+	stdx	r6,r0,r0
+	ld	r0,STK_PARM(r16)(r1)	/* Fetch r7 ret arg */
+	stdx	r7,r0,r0
+	ld	r0,STK_PARM(r17)(r1)	/* Fetch r8 ret arg */
+	stdx	r8,r0,r0
+	ld	r0,STK_PARM(r18)(r1)	/* Fetch r9 ret arg */
+	stdx	r9,r0,r0
+	ld	r0,STK_PARM(r19)(r1)	/* Fetch r10 ret arg */
+	stdx	r10,r0,r0
+	ld	r0,STK_PARM(r20)(r1)	/* Fetch r11 ret arg */
+	stdx	r11,r0,r0
+	ld	r0,STK_PARM(r21)(r1)	/* Fetch r12 ret arg */
+	stdx	r12,r0,r0
+
+	lwz	r0,8(r1)
+	mtcrf	0xff,r0
+
+	blr				/* return r3 = status */
diff --git a/arch/powerpc/platforms/pseries/hvconsole.c b/arch/powerpc/platforms/pseries/hvconsole.c
index ba6befd..a72a987 100644
--- a/arch/powerpc/platforms/pseries/hvconsole.c
+++ b/arch/powerpc/platforms/pseries/hvconsole.c
@@ -41,7 +41,7 @@
 	unsigned long got;
 
 	if (plpar_hcall(H_GET_TERM_CHAR, vtermno, 0, 0, 0, &got,
-		(unsigned long *)buf, (unsigned long *)buf+1) == H_Success)
+		(unsigned long *)buf, (unsigned long *)buf+1) == H_SUCCESS)
 		return got;
 	return 0;
 }
@@ -69,9 +69,9 @@
 
 	ret = plpar_hcall_norets(H_PUT_TERM_CHAR, vtermno, count, lbuf[0],
 				 lbuf[1]);
-	if (ret == H_Success)
+	if (ret == H_SUCCESS)
 		return count;
-	if (ret == H_Busy)
+	if (ret == H_BUSY)
 		return 0;
 	return -EIO;
 }
diff --git a/arch/powerpc/platforms/pseries/hvcserver.c b/arch/powerpc/platforms/pseries/hvcserver.c
index 22bfb5c..fcf4b4c 100644
--- a/arch/powerpc/platforms/pseries/hvcserver.c
+++ b/arch/powerpc/platforms/pseries/hvcserver.c
@@ -43,21 +43,21 @@
 static int hvcs_convert(long to_convert)
 {
 	switch (to_convert) {
-		case H_Success:
+		case H_SUCCESS:
 			return 0;
-		case H_Parameter:
+		case H_PARAMETER:
 			return -EINVAL;
-		case H_Hardware:
+		case H_HARDWARE:
 			return -EIO;
-		case H_Busy:
-		case H_LongBusyOrder1msec:
-		case H_LongBusyOrder10msec:
-		case H_LongBusyOrder100msec:
-		case H_LongBusyOrder1sec:
-		case H_LongBusyOrder10sec:
-		case H_LongBusyOrder100sec:
+		case H_BUSY:
+		case H_LONG_BUSY_ORDER_1_MSEC:
+		case H_LONG_BUSY_ORDER_10_MSEC:
+		case H_LONG_BUSY_ORDER_100_MSEC:
+		case H_LONG_BUSY_ORDER_1_SEC:
+		case H_LONG_BUSY_ORDER_10_SEC:
+		case H_LONG_BUSY_ORDER_100_SEC:
 			return -EBUSY;
-		case H_Function: /* fall through */
+		case H_FUNCTION: /* fall through */
 		default:
 			return -EPERM;
 	}
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 8952528..634b7d0 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -54,7 +54,8 @@
 EXPORT_SYMBOL(plpar_hcall_4out);
 EXPORT_SYMBOL(plpar_hcall_norets);
 EXPORT_SYMBOL(plpar_hcall_8arg_2ret);
-
+EXPORT_SYMBOL(plpar_hcall_7arg_7ret);
+EXPORT_SYMBOL(plpar_hcall_9arg_9ret);
 extern void pSeries_find_serial_port(void);
 
 
@@ -72,7 +73,7 @@
 
 	do {
 		rc = plpar_put_term_char(vtermno, sizeof(packet), packet);
-	} while (rc == H_Busy);
+	} while (rc == H_BUSY);
 }
 
 static long hvsi_udbg_buf_len;
@@ -85,7 +86,7 @@
 
 	if (hvsi_udbg_buf_len == 0) {
 		rc = plpar_get_term_char(vtermno, &hvsi_udbg_buf_len, hvsi_udbg_buf);
-		if (rc != H_Success || hvsi_udbg_buf[0] != 0xff) {
+		if (rc != H_SUCCESS || hvsi_udbg_buf[0] != 0xff) {
 			/* bad read or non-data packet */
 			hvsi_udbg_buf_len = 0;
 		} else {
@@ -139,7 +140,7 @@
 	buf[0] = c;
 	do {
 		rc = plpar_put_term_char(vtermno, 1, buf);
-	} while(rc == H_Busy);
+	} while(rc == H_BUSY);
 }
 
 /* Buffered chars getc */
@@ -158,7 +159,7 @@
 		/* get some more chars. */
 		inbuflen = 0;
 		rc = plpar_get_term_char(vtermno, &inbuflen, buf);
-		if (rc != H_Success)
+		if (rc != H_SUCCESS)
 			inbuflen = 0;	/* otherwise inbuflen is garbage */
 	}
 	if (inbuflen <= 0 || inbuflen > 16) {
@@ -304,7 +305,7 @@
 
 	lpar_rc = plpar_hcall(H_ENTER, flags, hpte_group, hpte_v,
 			      hpte_r, &slot, &dummy0, &dummy1);
-	if (unlikely(lpar_rc == H_PTEG_Full)) {
+	if (unlikely(lpar_rc == H_PTEG_FULL)) {
 		if (!(vflags & HPTE_V_BOLTED))
 			DBG_LOW(" full\n");
 		return -1;
@@ -315,7 +316,7 @@
 	 * will fail. However we must catch the failure in hash_page
 	 * or we will loop forever, so return -2 in this case.
 	 */
-	if (unlikely(lpar_rc != H_Success)) {
+	if (unlikely(lpar_rc != H_SUCCESS)) {
 		if (!(vflags & HPTE_V_BOLTED))
 			DBG_LOW(" lpar err %d\n", lpar_rc);
 		return -2;
@@ -346,9 +347,9 @@
 		/* don't remove a bolted entry */
 		lpar_rc = plpar_pte_remove(H_ANDCOND, hpte_group + slot_offset,
 					   (0x1UL << 4), &dummy1, &dummy2);
-		if (lpar_rc == H_Success)
+		if (lpar_rc == H_SUCCESS)
 			return i;
-		BUG_ON(lpar_rc != H_Not_Found);
+		BUG_ON(lpar_rc != H_NOT_FOUND);
 
 		slot_offset++;
 		slot_offset &= 0x7;
@@ -391,14 +392,14 @@
 
 	lpar_rc = plpar_pte_protect(flags, slot, want_v & HPTE_V_AVPN);
 
-	if (lpar_rc == H_Not_Found) {
+	if (lpar_rc == H_NOT_FOUND) {
 		DBG_LOW("not found !\n");
 		return -1;
 	}
 
 	DBG_LOW("ok\n");
 
-	BUG_ON(lpar_rc != H_Success);
+	BUG_ON(lpar_rc != H_SUCCESS);
 
 	return 0;
 }
@@ -417,7 +418,7 @@
 
 	lpar_rc = plpar_pte_read(flags, slot, &dword0, &dummy_word1);
 
-	BUG_ON(lpar_rc != H_Success);
+	BUG_ON(lpar_rc != H_SUCCESS);
 
 	return dword0;
 }
@@ -468,7 +469,7 @@
 	flags = newpp & 7;
 	lpar_rc = plpar_pte_protect(flags, slot, 0);
 
-	BUG_ON(lpar_rc != H_Success);
+	BUG_ON(lpar_rc != H_SUCCESS);
 }
 
 static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
@@ -484,10 +485,10 @@
 	want_v = hpte_encode_v(va, psize);
 	lpar_rc = plpar_pte_remove(H_AVPN, slot, want_v & HPTE_V_AVPN,
 				   &dummy1, &dummy2);
-	if (lpar_rc == H_Not_Found)
+	if (lpar_rc == H_NOT_FOUND)
 		return;
 
-	BUG_ON(lpar_rc != H_Success);
+	BUG_ON(lpar_rc != H_SUCCESS);
 }
 
 /*
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index b2fbf8b..5eb55ef 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -463,7 +463,7 @@
 	 * very low priority.  The cede enables interrupts, which
 	 * doesn't matter here.
 	 */
-	if (!lppaca[cpu ^ 1].idle || poll_pending() == H_Pending)
+	if (!lppaca[cpu ^ 1].idle || poll_pending() == H_PENDING)
 		cede_processor();
 
 out:
diff --git a/arch/powerpc/platforms/pseries/vio.c b/arch/powerpc/platforms/pseries/vio.c
index 866379b..8e53e04 100644
--- a/arch/powerpc/platforms/pseries/vio.c
+++ b/arch/powerpc/platforms/pseries/vio.c
@@ -258,7 +258,7 @@
 int vio_enable_interrupts(struct vio_dev *dev)
 {
 	int rc = h_vio_signal(dev->unit_address, VIO_IRQ_ENABLE);
-	if (rc != H_Success)
+	if (rc != H_SUCCESS)
 		printk(KERN_ERR "vio: Error 0x%x enabling interrupts\n", rc);
 	return rc;
 }
@@ -267,7 +267,7 @@
 int vio_disable_interrupts(struct vio_dev *dev)
 {
 	int rc = h_vio_signal(dev->unit_address, VIO_IRQ_DISABLE);
-	if (rc != H_Success)
+	if (rc != H_SUCCESS)
 		printk(KERN_ERR "vio: Error 0x%x disabling interrupts\n", rc);
 	return rc;
 }
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index 4864cb3..2d60ea3 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -168,7 +168,7 @@
 	unsigned long return_value;
 
 	lpar_rc = plpar_xirr(&return_value);
-	if (lpar_rc != H_Success)
+	if (lpar_rc != H_SUCCESS)
 		panic(" bad return code xirr - rc = %lx \n", lpar_rc);
 	return (int)return_value;
 }
@@ -179,7 +179,7 @@
 	unsigned long val64 = value & 0xffffffff;
 
 	lpar_rc = plpar_eoi(val64);
-	if (lpar_rc != H_Success)
+	if (lpar_rc != H_SUCCESS)
 		panic("bad return code EOI - rc = %ld, value=%lx\n", lpar_rc,
 		      val64);
 }
@@ -189,7 +189,7 @@
 	unsigned long lpar_rc;
 
 	lpar_rc = plpar_cppr(value);
-	if (lpar_rc != H_Success)
+	if (lpar_rc != H_SUCCESS)
 		panic("bad return code cppr - rc = %lx\n", lpar_rc);
 }
 
@@ -198,7 +198,7 @@
 	unsigned long lpar_rc;
 
 	lpar_rc = plpar_ipi(get_hard_smp_processor_id(n_cpu), value);
-	if (lpar_rc != H_Success)
+	if (lpar_rc != H_SUCCESS)
 		panic("bad return code qirr - rc = %lx\n", lpar_rc);
 }
 
diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c
index 327b00c..8d97b39 100644
--- a/drivers/char/hvcs.c
+++ b/drivers/char/hvcs.c
@@ -904,7 +904,7 @@
 		 * It is possible the vty-server was removed after the irq was
 		 * requested but before we have time to enable interrupts.
 		 */
-		if (vio_enable_interrupts(vdev) == H_Success)
+		if (vio_enable_interrupts(vdev) == H_SUCCESS)
 			return 0;
 		else {
 			printk(KERN_ERR "HVCS: int enable failed for"
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index ceb98fd..52d0102 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -235,7 +235,7 @@
 
 		lpar_rc = h_add_logical_lan_buffer(adapter->vdev->unit_address, desc.desc);
 		    
-		if(lpar_rc != H_Success) {
+		if(lpar_rc != H_SUCCESS) {
 			pool->free_map[free_index] = index;
 			pool->skbuff[index] = NULL;
 			pool->consumer_index--;
@@ -373,7 +373,7 @@
 
 	lpar_rc = h_add_logical_lan_buffer(adapter->vdev->unit_address, desc.desc);
 		    
-	if(lpar_rc != H_Success) {
+	if(lpar_rc != H_SUCCESS) {
 		ibmveth_debug_printk("h_add_logical_lan_buffer failed during recycle rc=%ld", lpar_rc);
 		ibmveth_remove_buffer_from_pool(adapter, adapter->rx_queue.queue_addr[adapter->rx_queue.index].correlator);
 	}
@@ -511,7 +511,7 @@
 					 adapter->filter_list_dma,
 					 mac_address);
 
-	if(lpar_rc != H_Success) {
+	if(lpar_rc != H_SUCCESS) {
 		ibmveth_error_printk("h_register_logical_lan failed with %ld\n", lpar_rc);
 		ibmveth_error_printk("buffer TCE:0x%lx filter TCE:0x%lx rxq desc:0x%lx MAC:0x%lx\n",
 				     adapter->buffer_list_dma,
@@ -527,7 +527,7 @@
 		ibmveth_error_printk("unable to request irq 0x%x, rc %d\n", netdev->irq, rc);
 		do {
 			rc = h_free_logical_lan(adapter->vdev->unit_address);
-		} while (H_isLongBusy(rc) || (rc == H_Busy));
+		} while (H_IS_LONG_BUSY(rc) || (rc == H_BUSY));
 
 		ibmveth_cleanup(adapter);
 		return rc;
@@ -556,9 +556,9 @@
 
 	do {
 		lpar_rc = h_free_logical_lan(adapter->vdev->unit_address);
-	} while (H_isLongBusy(lpar_rc) || (lpar_rc == H_Busy));
+	} while (H_IS_LONG_BUSY(lpar_rc) || (lpar_rc == H_BUSY));
 
-	if(lpar_rc != H_Success)
+	if(lpar_rc != H_SUCCESS)
 	{
 		ibmveth_error_printk("h_free_logical_lan failed with %lx, continuing with close\n",
 				     lpar_rc);
@@ -693,9 +693,9 @@
 					     desc[4].desc,
 					     desc[5].desc,
 					     correlator);
-	} while ((lpar_rc == H_Busy) && (retry_count--));
+	} while ((lpar_rc == H_BUSY) && (retry_count--));
     
-	if(lpar_rc != H_Success && lpar_rc != H_Dropped) {
+	if(lpar_rc != H_SUCCESS && lpar_rc != H_DROPPED) {
 		int i;
 		ibmveth_error_printk("tx: h_send_logical_lan failed with rc=%ld\n", lpar_rc);
 		for(i = 0; i < 6; i++) {
@@ -786,14 +786,14 @@
 	/* we think we are done - reenable interrupts, then check once more to make sure we are done */
 	lpar_rc = h_vio_signal(adapter->vdev->unit_address, VIO_IRQ_ENABLE);
 
-	ibmveth_assert(lpar_rc == H_Success);
+	ibmveth_assert(lpar_rc == H_SUCCESS);
 
 	netif_rx_complete(netdev);
 
 	if(ibmveth_rxq_pending_buffer(adapter) && netif_rx_reschedule(netdev, frames_processed))
 	{
 		lpar_rc = h_vio_signal(adapter->vdev->unit_address, VIO_IRQ_DISABLE);
-		ibmveth_assert(lpar_rc == H_Success);
+		ibmveth_assert(lpar_rc == H_SUCCESS);
 		more_work = 1;
 		goto restart_poll;
 	}
@@ -813,7 +813,7 @@
 
 	if(netif_rx_schedule_prep(netdev)) {
 		lpar_rc = h_vio_signal(adapter->vdev->unit_address, VIO_IRQ_DISABLE);
-		ibmveth_assert(lpar_rc == H_Success);
+		ibmveth_assert(lpar_rc == H_SUCCESS);
 		__netif_rx_schedule(netdev);
 	}
 	return IRQ_HANDLED;
@@ -835,7 +835,7 @@
 					   IbmVethMcastEnableRecv |
 					   IbmVethMcastDisableFiltering,
 					   0);
-		if(lpar_rc != H_Success) {
+		if(lpar_rc != H_SUCCESS) {
 			ibmveth_error_printk("h_multicast_ctrl rc=%ld when entering promisc mode\n", lpar_rc);
 		}
 	} else {
@@ -847,7 +847,7 @@
 					   IbmVethMcastDisableFiltering |
 					   IbmVethMcastClearFilterTable,
 					   0);
-		if(lpar_rc != H_Success) {
+		if(lpar_rc != H_SUCCESS) {
 			ibmveth_error_printk("h_multicast_ctrl rc=%ld when attempting to clear filter table\n", lpar_rc);
 		}
 		/* add the addresses to the filter table */
@@ -858,7 +858,7 @@
 			lpar_rc = h_multicast_ctrl(adapter->vdev->unit_address,
 						   IbmVethMcastAddFilter,
 						   mcast_addr);
-			if(lpar_rc != H_Success) {
+			if(lpar_rc != H_SUCCESS) {
 				ibmveth_error_printk("h_multicast_ctrl rc=%ld when adding an entry to the filter table\n", lpar_rc);
 			}
 		}
@@ -867,7 +867,7 @@
 		lpar_rc = h_multicast_ctrl(adapter->vdev->unit_address,
 					   IbmVethMcastEnableFiltering,
 					   0);
-		if(lpar_rc != H_Success) {
+		if(lpar_rc != H_SUCCESS) {
 			ibmveth_error_printk("h_multicast_ctrl rc=%ld when enabling filtering\n", lpar_rc);
 		}
 	}
diff --git a/drivers/scsi/ibmvscsi/rpa_vscsi.c b/drivers/scsi/ibmvscsi/rpa_vscsi.c
index f47dd87..892e8ed 100644
--- a/drivers/scsi/ibmvscsi/rpa_vscsi.c
+++ b/drivers/scsi/ibmvscsi/rpa_vscsi.c
@@ -80,7 +80,7 @@
 	tasklet_kill(&hostdata->srp_task);
 	do {
 		rc = plpar_hcall_norets(H_FREE_CRQ, vdev->unit_address);
-	} while ((rc == H_Busy) || (H_isLongBusy(rc)));
+	} while ((rc == H_BUSY) || (H_IS_LONG_BUSY(rc)));
 	dma_unmap_single(hostdata->dev,
 			 queue->msg_token,
 			 queue->size * sizeof(*queue->msgs), DMA_BIDIRECTIONAL);
@@ -230,7 +230,7 @@
 	rc = plpar_hcall_norets(H_REG_CRQ,
 				vdev->unit_address,
 				queue->msg_token, PAGE_SIZE);
-	if (rc == H_Resource) 
+	if (rc == H_RESOURCE)
 		/* maybe kexecing and resource is busy. try a reset */
 		rc = ibmvscsi_reset_crq_queue(queue,
 					      hostdata);
@@ -269,7 +269,7 @@
       req_irq_failed:
 	do {
 		rc = plpar_hcall_norets(H_FREE_CRQ, vdev->unit_address);
-	} while ((rc == H_Busy) || (H_isLongBusy(rc)));
+	} while ((rc == H_BUSY) || (H_IS_LONG_BUSY(rc)));
       reg_crq_failed:
 	dma_unmap_single(hostdata->dev,
 			 queue->msg_token,
@@ -295,7 +295,7 @@
 	/* Re-enable the CRQ */
 	do {
 		rc = plpar_hcall_norets(H_ENABLE_CRQ, vdev->unit_address);
-	} while ((rc == H_InProgress) || (rc == H_Busy) || (H_isLongBusy(rc)));
+	} while ((rc == H_IN_PROGRESS) || (rc == H_BUSY) || (H_IS_LONG_BUSY(rc)));
 
 	if (rc)
 		printk(KERN_ERR "ibmvscsi: Error %d enabling adapter\n", rc);
@@ -317,7 +317,7 @@
 	/* Close the CRQ */
 	do {
 		rc = plpar_hcall_norets(H_FREE_CRQ, vdev->unit_address);
-	} while ((rc == H_Busy) || (H_isLongBusy(rc)));
+	} while ((rc == H_BUSY) || (H_IS_LONG_BUSY(rc)));
 
 	/* Clean out the queue */
 	memset(queue->msgs, 0x00, PAGE_SIZE);
diff --git a/include/asm-powerpc/eeh.h b/include/asm-powerpc/eeh.h
index 5207758..868c713 100644
--- a/include/asm-powerpc/eeh.h
+++ b/include/asm-powerpc/eeh.h
@@ -60,24 +60,10 @@
  * device (including config space i/o).  Call eeh_add_device_late
  * to finish the eeh setup for this device.
  */
-void eeh_add_device_early(struct device_node *);
-void eeh_add_device_late(struct pci_dev *dev);
 void eeh_add_device_tree_early(struct device_node *);
 void eeh_add_device_tree_late(struct pci_bus *);
 
 /**
- * eeh_remove_device - undo EEH setup for the indicated pci device
- * @dev: pci device to be removed
- *
- * This routine should be called when a device is removed from
- * a running system (e.g. by hotplug or dlpar).  It unregisters
- * the PCI device from the EEH subsystem.  I/O errors affecting
- * this device will no longer be detected after this call; thus,
- * i/o errors affecting this slot may leave this device unusable.
- */
-void eeh_remove_device(struct pci_dev *);
-
-/**
  * eeh_remove_device_recursive - undo EEH for device & children.
  * @dev: pci device to be removed
  *
@@ -116,12 +102,6 @@
 
 static inline void pci_addr_cache_build(void) { }
 
-static inline void eeh_add_device_early(struct device_node *dn) { }
-
-static inline void eeh_add_device_late(struct pci_dev *dev) { }
-
-static inline void eeh_remove_device(struct pci_dev *dev) { }
-
 static inline void eeh_add_device_tree_early(struct device_node *dn) { }
 
 static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
diff --git a/include/asm-powerpc/hvcall.h b/include/asm-powerpc/hvcall.h
index b72c04f..6cc7e1f 100644
--- a/include/asm-powerpc/hvcall.h
+++ b/include/asm-powerpc/hvcall.h
@@ -4,47 +4,88 @@
 
 #define HVSC			.long 0x44000022
 
-#define H_Success	0
-#define H_Busy		1	/* Hardware busy -- retry later */
-#define H_Closed	2	/* Resource closed */
-#define H_Constrained	4	/* Resource request constrained to max allowed */
-#define H_InProgress   14	/* Kind of like busy */
-#define H_Pending      17	/* returned from H_POLL_PENDING */
-#define H_Continue     18	/* Returned from H_Join on success */
-#define H_LongBusyStartRange   9900  /* Start of long busy range */
-#define H_LongBusyOrder1msec   9900  /* Long busy, hint that 1msec is a good time to retry */
-#define H_LongBusyOrder10msec  9901  /* Long busy, hint that 10msec is a good time to retry */
-#define H_LongBusyOrder100msec 9902  /* Long busy, hint that 100msec is a good time to retry */
-#define H_LongBusyOrder1sec    9903  /* Long busy, hint that 1sec is a good time to retry */
-#define H_LongBusyOrder10sec   9904  /* Long busy, hint that 10sec is a good time to retry */
-#define H_LongBusyOrder100sec  9905  /* Long busy, hint that 100sec is a good time to retry */
-#define H_LongBusyEndRange     9905  /* End of long busy range */
-#define H_Hardware	-1	/* Hardware error */
-#define H_Function	-2	/* Function not supported */
-#define H_Privilege	-3	/* Caller not privileged */
-#define H_Parameter	-4	/* Parameter invalid, out-of-range or conflicting */
-#define H_Bad_Mode	-5	/* Illegal msr value */
-#define H_PTEG_Full	-6	/* PTEG is full */
-#define H_Not_Found	-7	/* PTE was not found" */
-#define H_Reserved_DABR	-8	/* DABR address is reserved by the hypervisor on this processor" */
-#define H_NoMem                 -9
-#define H_Authority            -10
-#define H_Permission           -11
-#define H_Dropped              -12
-#define H_SourceParm           -13
-#define H_DestParm             -14
-#define H_RemoteParm           -15
-#define H_Resource             -16
+#define H_SUCCESS	0
+#define H_BUSY		1	/* Hardware busy -- retry later */
+#define H_CLOSED	2	/* Resource closed */
+#define H_NOT_AVAILABLE 3
+#define H_CONSTRAINED	4	/* Resource request constrained to max allowed */
+#define H_PARTIAL       5
+#define H_IN_PROGRESS	14	/* Kind of like busy */
+#define H_PAGE_REGISTERED 15
+#define H_PARTIAL_STORE   16
+#define H_PENDING	17	/* returned from H_POLL_PENDING */
+#define H_CONTINUE	18	/* Returned from H_Join on success */
+#define H_LONG_BUSY_START_RANGE		9900  /* Start of long busy range */
+#define H_LONG_BUSY_ORDER_1_MSEC	9900  /* Long busy, hint that 1msec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_MSEC	9901  /* Long busy, hint that 10msec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_MSEC 	9902  /* Long busy, hint that 100msec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_1_SEC		9903  /* Long busy, hint that 1sec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_SEC	9904  /* Long busy, hint that 10sec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_SEC	9905  /* Long busy, hint that 100sec \
+						 is a good time to retry */
+#define H_LONG_BUSY_END_RANGE		9905  /* End of long busy range */
+#define H_HARDWARE	-1	/* Hardware error */
+#define H_FUNCTION	-2	/* Function not supported */
+#define H_PRIVILEGE	-3	/* Caller not privileged */
+#define H_PARAMETER	-4	/* Parameter invalid, out-of-range or conflicting */
+#define H_BAD_MODE	-5	/* Illegal msr value */
+#define H_PTEG_FULL	-6	/* PTEG is full */
+#define H_NOT_FOUND	-7	/* PTE was not found" */
+#define H_RESERVED_DABR	-8	/* DABR address is reserved by the hypervisor on this processor" */
+#define H_NO_MEM	-9
+#define H_AUTHORITY	-10
+#define H_PERMISSION	-11
+#define H_DROPPED	-12
+#define H_SOURCE_PARM	-13
+#define H_DEST_PARM	-14
+#define H_REMOTE_PARM	-15
+#define H_RESOURCE	-16
+#define H_ADAPTER_PARM  -17
+#define H_RH_PARM       -18
+#define H_RCQ_PARM      -19
+#define H_SCQ_PARM      -20
+#define H_EQ_PARM       -21
+#define H_RT_PARM       -22
+#define H_ST_PARM       -23
+#define H_SIGT_PARM     -24
+#define H_TOKEN_PARM    -25
+#define H_MLENGTH_PARM  -27
+#define H_MEM_PARM      -28
+#define H_MEM_ACCESS_PARM -29
+#define H_ATTR_PARM     -30
+#define H_PORT_PARM     -31
+#define H_MCG_PARM      -32
+#define H_VL_PARM       -33
+#define H_TSIZE_PARM    -34
+#define H_TRACE_PARM    -35
+
+#define H_MASK_PARM     -37
+#define H_MCG_FULL      -38
+#define H_ALIAS_EXIST   -39
+#define H_P_COUNTER     -40
+#define H_TABLE_FULL    -41
+#define H_ALT_TABLE     -42
+#define H_MR_CONDITION  -43
+#define H_NOT_ENOUGH_RESOURCES -44
+#define H_R_STATE       -45
+#define H_RESCINDEND    -46
+
 
 /* Long Busy is a condition that can be returned by the firmware
  * when a call cannot be completed now, but the identical call
  * should be retried later.  This prevents calls blocking in the
- * firmware for long periods of time. Annoyingly the firmware can return
+ * firmware for long periods of time.  Annoyingly the firmware can return
  * a range of return codes, hinting at how long we should wait before
  * retrying.  If you don't care for the hint, the macro below is a good
  * way to check for the long_busy return codes
  */
-#define H_isLongBusy(x)  ((x >= H_LongBusyStartRange) && (x <= H_LongBusyEndRange))
+#define H_IS_LONG_BUSY(x)  ((x >= H_LONG_BUSY_START_RANGE) \
+			     && (x <= H_LONG_BUSY_END_RANGE))
 
 /* Flags */
 #define H_LARGE_PAGE		(1UL<<(63-16))
@@ -66,6 +107,9 @@
 #define H_DABRX_KERNEL		(1UL<<(63-62))
 #define H_DABRX_USER		(1UL<<(63-63))
 
+/* Each control block has to be on a 4K bondary */
+#define H_CB_ALIGNMENT          4096
+
 /* pSeries hypervisor opcodes */
 #define H_REMOVE		0x04
 #define H_ENTER			0x08
@@ -99,25 +143,52 @@
 #define H_PERFMON		0x7c
 #define H_MIGRATE_DMA		0x78
 #define H_REGISTER_VPA		0xDC
-#define H_CEDE		        0xE0
+#define H_CEDE			0xE0
 #define H_CONFER		0xE4
-#define H_PROD		        0xE8
+#define H_PROD			0xE8
 #define H_GET_PPP		0xEC
 #define H_SET_PPP		0xF0
 #define H_PURR			0xF4
-#define H_PIC		        0xF8
+#define H_PIC			0xF8
 #define H_REG_CRQ		0xFC
 #define H_FREE_CRQ		0x100
 #define H_VIO_SIGNAL		0x104
 #define H_SEND_CRQ		0x108
-#define H_COPY_RDMA             0x110
+#define H_COPY_RDMA		0x110
 #define H_SET_XDABR		0x134
 #define H_STUFF_TCE		0x138
 #define H_PUT_TCE_INDIRECT	0x13C
 #define H_VTERM_PARTNER_INFO	0x150
 #define H_REGISTER_VTERM	0x154
 #define H_FREE_VTERM		0x158
-#define H_POLL_PENDING	        0x1D8
+#define H_RESET_EVENTS          0x15C
+#define H_ALLOC_RESOURCE        0x160
+#define H_FREE_RESOURCE         0x164
+#define H_MODIFY_QP             0x168
+#define H_QUERY_QP              0x16C
+#define H_REREGISTER_PMR        0x170
+#define H_REGISTER_SMR          0x174
+#define H_QUERY_MR              0x178
+#define H_QUERY_MW              0x17C
+#define H_QUERY_HCA             0x180
+#define H_QUERY_PORT            0x184
+#define H_MODIFY_PORT           0x188
+#define H_DEFINE_AQP1           0x18C
+#define H_GET_TRACE_BUFFER      0x190
+#define H_DEFINE_AQP0           0x194
+#define H_RESIZE_MR             0x198
+#define H_ATTACH_MCQP           0x19C
+#define H_DETACH_MCQP           0x1A0
+#define H_CREATE_RPT            0x1A4
+#define H_REMOVE_RPT            0x1A8
+#define H_REGISTER_RPAGES       0x1AC
+#define H_DISABLE_AND_GETC      0x1B0
+#define H_ERROR_DATA            0x1B4
+#define H_GET_HCA_INFO          0x1B8
+#define H_GET_PERF_COUNT        0x1BC
+#define H_MANAGE_TRACE          0x1C0
+#define H_QUERY_INT_STATE       0x1E4
+#define H_POLL_PENDING		0x1D8
 #define H_JOIN			0x298
 #define H_ENABLE_CRQ		0x2B0
 
@@ -152,7 +223,7 @@
  */
 long plpar_hcall_8arg_2ret(unsigned long opcode,
 			   unsigned long arg1,
-		  	   unsigned long arg2,
+			   unsigned long arg2,
 			   unsigned long arg3,
 			   unsigned long arg4,
 			   unsigned long arg5,
@@ -176,6 +247,42 @@
 		      unsigned long *out3,
 		      unsigned long *out4);
 
+long plpar_hcall_7arg_7ret(unsigned long opcode,
+			   unsigned long arg1,
+			   unsigned long arg2,
+			   unsigned long arg3,
+			   unsigned long arg4,
+			   unsigned long arg5,
+			   unsigned long arg6,
+			   unsigned long arg7,
+			   unsigned long *out1,
+			   unsigned long *out2,
+			   unsigned long *out3,
+			   unsigned long *out4,
+			   unsigned long *out5,
+			   unsigned long *out6,
+			   unsigned long *out7);
+
+long plpar_hcall_9arg_9ret(unsigned long opcode,
+			   unsigned long arg1,
+			   unsigned long arg2,
+			   unsigned long arg3,
+			   unsigned long arg4,
+			   unsigned long arg5,
+			   unsigned long arg6,
+			   unsigned long arg7,
+			   unsigned long arg8,
+			   unsigned long arg9,
+			   unsigned long *out1,
+			   unsigned long *out2,
+			   unsigned long *out3,
+			   unsigned long *out4,
+			   unsigned long *out5,
+			   unsigned long *out6,
+			   unsigned long *out7,
+			   unsigned long *out8,
+			   unsigned long *out9);
+
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_HVCALL_H */