V4L/DVB (13979): [STV090x] Added possibility to set a fixed TS output clock.
This could be useful for p.e. Common Interface applications where data rate is limited.
Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/dvb/frontends/stv090x.c b/drivers/media/dvb/frontends/stv090x.c
index 2a25dd1..93be76c 100644
--- a/drivers/media/dvb/frontends/stv090x.c
+++ b/drivers/media/dvb/frontends/stv090x.c
@@ -4199,6 +4199,71 @@
default:
break;
}
+
+ if (state->config->ts1_clk > 0) {
+ u32 speed;
+
+ switch (state->config->ts1_mode) {
+ case STV090x_TSMODE_PARALLEL_PUNCTURED:
+ case STV090x_TSMODE_DVBCI:
+ default:
+ speed = state->internal->mclk /
+ (state->config->ts1_clk / 4);
+ if (speed < 0x08)
+ speed = 0x08;
+ if (speed > 0xFF)
+ speed = 0xFF;
+ break;
+ case STV090x_TSMODE_SERIAL_PUNCTURED:
+ case STV090x_TSMODE_SERIAL_CONTINUOUS:
+ speed = state->internal->mclk /
+ (state->config->ts1_clk / 32);
+ if (speed < 0x20)
+ speed = 0x20;
+ if (speed > 0xFF)
+ speed = 0xFF;
+ break;
+ }
+ reg = stv090x_read_reg(state, STV090x_P1_TSCFGM);
+ STV090x_SETFIELD_Px(reg, TSFIFO_MANSPEED_FIELD, 3);
+ if (stv090x_write_reg(state, STV090x_P1_TSCFGM, reg) < 0)
+ goto err;
+ if (stv090x_write_reg(state, STV090x_P1_TSSPEED, speed) < 0)
+ goto err;
+ }
+
+ if (state->config->ts2_clk > 0) {
+ u32 speed;
+
+ switch (state->config->ts2_mode) {
+ case STV090x_TSMODE_PARALLEL_PUNCTURED:
+ case STV090x_TSMODE_DVBCI:
+ default:
+ speed = state->internal->mclk /
+ (state->config->ts2_clk / 4);
+ if (speed < 0x08)
+ speed = 0x08;
+ if (speed > 0xFF)
+ speed = 0xFF;
+ break;
+ case STV090x_TSMODE_SERIAL_PUNCTURED:
+ case STV090x_TSMODE_SERIAL_CONTINUOUS:
+ speed = state->internal->mclk /
+ (state->config->ts2_clk / 32);
+ if (speed < 0x20)
+ speed = 0x20;
+ if (speed > 0xFF)
+ speed = 0xFF;
+ break;
+ }
+ reg = stv090x_read_reg(state, STV090x_P2_TSCFGM);
+ STV090x_SETFIELD_Px(reg, TSFIFO_MANSPEED_FIELD, 3);
+ if (stv090x_write_reg(state, STV090x_P2_TSCFGM, reg) < 0)
+ goto err;
+ if (stv090x_write_reg(state, STV090x_P2_TSSPEED, speed) < 0)
+ goto err;
+ }
+
reg = stv090x_read_reg(state, STV090x_P2_TSCFGH);
STV090x_SETFIELD_Px(reg, RST_HWARE_FIELD, 0x01);
if (stv090x_write_reg(state, STV090x_P2_TSCFGH, reg) < 0)
diff --git a/drivers/media/dvb/frontends/stv090x.h b/drivers/media/dvb/frontends/stv090x.h
index e009183..96e3dc7 100644
--- a/drivers/media/dvb/frontends/stv090x.h
+++ b/drivers/media/dvb/frontends/stv090x.h
@@ -70,6 +70,8 @@
u8 ts1_mode;
u8 ts2_mode;
+ u32 ts1_clk;
+ u32 ts2_clk;
enum stv090x_i2crpt repeater_level;