ARM: dts: msm: add sdc3 support for msm8226
Add sdc3 slot support.
CRs-Fixed: 490761
Change-Id: I89464f4162d858606d3de86ea71f9604dc64a6e7
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Krishna Konda <kkonda@codeaurora.org>
diff --git a/arch/arm/boot/dts/msm8226.dtsi b/arch/arm/boot/dts/msm8226.dtsi
index 42c1247..17bdb9c 100644
--- a/arch/arm/boot/dts/msm8226.dtsi
+++ b/arch/arm/boot/dts/msm8226.dtsi
@@ -21,6 +21,7 @@
spi0 = &spi_0;
sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
sdhc2 = &sdhc_2; /* SDC2 SD card slot */
+ sdhc3 = &sdhc_3; /* SDC3 SDIO slot */
};
memory {
@@ -762,6 +763,95 @@
status = "disabled";
};
+ sdcc3: qcom,sdcc@f9864000 {
+ cell-index = <3>;
+ compatible = "qcom,msm-sdcc";
+ reg = <0xf9864000 0x800>,
+ <0xf9864800 0x100>,
+ <0xf9844000 0x7000>;
+ reg-names = "core_mem", "dml_mem", "bam_mem";
+
+ qcom,bus-width = <4>;
+ gpios = <&msmgpio 44 0>, /* CLK */
+ <&msmgpio 43 0>, /* CMD */
+ <&msmgpio 42 0>, /* DATA0 */
+ <&msmgpio 41 0>, /* DATA1 */
+ <&msmgpio 40 0>, /* DATA2 */
+ <&msmgpio 39 0>; /* DATA3 */
+ qcom,gpio-names = "CLK", "CMD", "DAT0", "DAT1", "DAT2", "DAT3";
+
+ qcom,clk-rates = <400000 20000000 25000000 50000000 100000000>;
+
+ qcom,msm-bus,name = "sdcc3";
+ qcom,msm-bus,num-cases = <8>;
+ qcom,msm-bus,num-paths = <1>;
+ qcom,msm-bus,vectors-KBps = <79 512 0 0>, /* No vote */
+ <79 512 1600 3200>, /* 400 KB/s*/
+ <79 512 80000 160000>, /* 20 MB/s */
+ <79 512 100000 200000>, /* 25 MB/s */
+ <79 512 200000 400000>, /* 50 MB/s */
+ <79 512 400000 800000>, /* 100 MB/s */
+ <79 512 400000 800000>, /* 200 MB/s */
+ <79 512 2048000 4096000>; /* Max. bandwidth */
+ qcom,bus-bw-vectors-bps = <0 400000 20000000 25000000 50000000
+ 100000000 200000000 4294967295>;
+
+ #address-cells = <0>;
+ interrupt-parent = <&sdcc3>;
+ interrupts = <0 1 2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xffffffff>;
+ interrupt-map = <0 &intc 0 127 0
+ 1 &intc 0 223 0
+ 2 &msmgpio 41 0x8>;
+ interrupt-names = "core_irq", "bam_irq", "sdiowakeup_irq";
+
+ status = "disabled";
+ };
+
+ sdhc_3: sdhci@f9864900 {
+ compatible = "qcom,sdhci-msm";
+ reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ qcom,bus-width = <4>;
+ gpios = <&msmgpio 44 0>, /* CLK */
+ <&msmgpio 43 0>, /* CMD */
+ <&msmgpio 42 0>, /* DATA0 */
+ <&msmgpio 41 0>, /* DATA1 */
+ <&msmgpio 40 0>, /* DATA2 */
+ <&msmgpio 39 0>; /* DATA3 */
+ qcom,gpio-names = "CLK", "CMD", "DAT0", "DAT1", "DAT2", "DAT3";
+
+ qcom,clk-rates = <400000 20000000 25000000 50000000 100000000>;
+
+ qcom,msm-bus,name = "sdhc3";
+ qcom,msm-bus,num-cases = <8>;
+ qcom,msm-bus,num-paths = <1>;
+ qcom,msm-bus,vectors-KBps = <79 512 0 0>, /* No vote */
+ <79 512 1600 3200>, /* 400 KB/s*/
+ <79 512 80000 160000>, /* 20 MB/s */
+ <79 512 100000 200000>, /* 25 MB/s */
+ <79 512 200000 400000>, /* 50 MB/s */
+ <79 512 400000 800000>, /* 100 MB/s */
+ <79 512 400000 800000>, /* 200 MB/s */
+ <79 512 2048000 4096000>; /* Max. bandwidth */
+ qcom,bus-bw-vectors-bps = <0 400000 20000000 25000000 50000000
+ 100000000 200000000 4294967295>;
+
+ #address-cells = <0>;
+ interrupt-parent = <&sdhc_3>;
+ interrupts = <0 1 2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xffffffff>;
+ interrupt-map = <0 &intc 0 127 0
+ 1 &intc 0 224 0
+ 2 &msmgpio 41 0x8>;
+ interrupt-names = "hc_irq", "pwr_irq", "sdiowakeup_irq";
+
+ status = "disabled";
+ };
+
spmi_bus: qcom,spmi@fc4c0000 {
cell-index = <0>;
compatible = "qcom,spmi-pmic-arb";