ARM: 6085/1: ux500: reorganize i2c devices
Move common i2c devices to devices.c and DB8500-specific I2C
devices to devices-db8500.c.
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 0e595bf..cd0bd36 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -70,27 +70,8 @@
.num_chipselect = 5,
};
-#define U8500_I2C_RESOURCES(id, size) \
-static struct resource u8500_i2c_resources_##id[] = { \
- [0] = { \
- .start = U8500_I2C##id##_BASE, \
- .end = U8500_I2C##id##_BASE + size - 1, \
- .flags = IORESOURCE_MEM, \
- }, \
- [1] = { \
- .start = IRQ_I2C##id, \
- .end = IRQ_I2C##id, \
- .flags = IORESOURCE_IRQ \
- } \
-}
-
-U8500_I2C_RESOURCES(0, SZ_4K);
-U8500_I2C_RESOURCES(1, SZ_4K);
-U8500_I2C_RESOURCES(2, SZ_4K);
-U8500_I2C_RESOURCES(3, SZ_4K);
-
#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
-static struct nmk_i2c_controller u8500_i2c_##id = { \
+static struct nmk_i2c_controller u8500_i2c##id##_data = { \
/* \
* slave data setup time, which is \
* 250 ns,100ns,10ns which is 14,6,2 \
@@ -118,22 +99,6 @@
U8500_I2C_CONTROLLER(2, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
U8500_I2C_CONTROLLER(3, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
-#define U8500_I2C_PDEVICE(cid) \
-static struct platform_device i2c_controller##cid = { \
- .name = "nmk-i2c", \
- .id = cid, \
- .num_resources = 2, \
- .resource = u8500_i2c_resources_##cid, \
- .dev = { \
- .platform_data = &u8500_i2c_##cid \
- } \
-}
-
-U8500_I2C_PDEVICE(0);
-U8500_I2C_PDEVICE(1);
-U8500_I2C_PDEVICE(2);
-U8500_I2C_PDEVICE(3);
-
static struct amba_device *amba_devs[] __initdata = {
&ux500_uart0_device,
&ux500_uart1_device,
@@ -143,16 +108,21 @@
/* add any platform devices here - TODO */
static struct platform_device *platform_devs[] __initdata = {
- &i2c_controller0,
- &i2c_controller1,
- &i2c_controller2,
- &i2c_controller3,
+ &u8500_i2c0_device,
+ &ux500_i2c1_device,
+ &ux500_i2c2_device,
+ &ux500_i2c3_device,
};
static void __init u8500_init_machine(void)
{
int i;
+ u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data;
+ ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data;
+ ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data;
+ ux500_i2c3_device.dev.platform_data = &u8500_i2c3_data;
+
u8500_ssp0_device.dev.platform_data = &ssp0_platform_data;
/* Register the active AMBA devices on this board */