| /* |
| * builtin-stat.c |
| * |
| * Builtin stat command: Give a precise performance counters summary |
| * overview about any workload, CPU or specific PID. |
| * |
| * Sample output: |
| |
| $ perf stat ./hackbench 10 |
| |
| Time: 0.118 |
| |
| Performance counter stats for './hackbench 10': |
| |
| 1708.761321 task-clock # 11.037 CPUs utilized |
| 41,190 context-switches # 0.024 M/sec |
| 6,735 CPU-migrations # 0.004 M/sec |
| 17,318 page-faults # 0.010 M/sec |
| 5,205,202,243 cycles # 3.046 GHz |
| 3,856,436,920 stalled-cycles-frontend # 74.09% frontend cycles idle |
| 1,600,790,871 stalled-cycles-backend # 30.75% backend cycles idle |
| 2,603,501,247 instructions # 0.50 insns per cycle |
| # 1.48 stalled cycles per insn |
| 484,357,498 branches # 283.455 M/sec |
| 6,388,934 branch-misses # 1.32% of all branches |
| |
| 0.154822978 seconds time elapsed |
| |
| * |
| * Copyright (C) 2008-2011, Red Hat Inc, Ingo Molnar <mingo@redhat.com> |
| * |
| * Improvements and fixes by: |
| * |
| * Arjan van de Ven <arjan@linux.intel.com> |
| * Yanmin Zhang <yanmin.zhang@intel.com> |
| * Wu Fengguang <fengguang.wu@intel.com> |
| * Mike Galbraith <efault@gmx.de> |
| * Paul Mackerras <paulus@samba.org> |
| * Jaswinder Singh Rajput <jaswinder@kernel.org> |
| * |
| * Released under the GPL v2. (and only v2, not any later version) |
| */ |
| |
| #include "perf.h" |
| #include "builtin.h" |
| #include "util/util.h" |
| #include "util/parse-options.h" |
| #include "util/parse-events.h" |
| #include "util/event.h" |
| #include "util/evlist.h" |
| #include "util/evsel.h" |
| #include "util/debug.h" |
| #include "util/color.h" |
| #include "util/header.h" |
| #include "util/cpumap.h" |
| #include "util/thread.h" |
| #include "util/thread_map.h" |
| |
| #include <sys/prctl.h> |
| #include <math.h> |
| #include <locale.h> |
| |
| #define DEFAULT_SEPARATOR " " |
| #define CNTR_NOT_SUPPORTED "<not supported>" |
| #define CNTR_NOT_COUNTED "<not counted>" |
| |
| static struct perf_event_attr default_attrs[] = { |
| |
| { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK }, |
| { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES }, |
| { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS }, |
| { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS }, |
| |
| { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES }, |
| { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_STALLED_CYCLES_FRONTEND }, |
| { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_STALLED_CYCLES_BACKEND }, |
| { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS }, |
| { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS }, |
| { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES }, |
| |
| }; |
| |
| /* |
| * Detailed stats (-d), covering the L1 and last level data caches: |
| */ |
| static struct perf_event_attr detailed_attrs[] = { |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_L1D << 0 | |
| (PERF_COUNT_HW_CACHE_OP_READ << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) }, |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_L1D << 0 | |
| (PERF_COUNT_HW_CACHE_OP_READ << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) }, |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_LL << 0 | |
| (PERF_COUNT_HW_CACHE_OP_READ << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) }, |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_LL << 0 | |
| (PERF_COUNT_HW_CACHE_OP_READ << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) }, |
| }; |
| |
| /* |
| * Very detailed stats (-d -d), covering the instruction cache and the TLB caches: |
| */ |
| static struct perf_event_attr very_detailed_attrs[] = { |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_L1I << 0 | |
| (PERF_COUNT_HW_CACHE_OP_READ << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) }, |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_L1I << 0 | |
| (PERF_COUNT_HW_CACHE_OP_READ << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) }, |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_DTLB << 0 | |
| (PERF_COUNT_HW_CACHE_OP_READ << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) }, |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_DTLB << 0 | |
| (PERF_COUNT_HW_CACHE_OP_READ << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) }, |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_ITLB << 0 | |
| (PERF_COUNT_HW_CACHE_OP_READ << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) }, |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_ITLB << 0 | |
| (PERF_COUNT_HW_CACHE_OP_READ << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) }, |
| |
| }; |
| |
| /* |
| * Very, very detailed stats (-d -d -d), adding prefetch events: |
| */ |
| static struct perf_event_attr very_very_detailed_attrs[] = { |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_L1D << 0 | |
| (PERF_COUNT_HW_CACHE_OP_PREFETCH << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16) }, |
| |
| { .type = PERF_TYPE_HW_CACHE, |
| .config = |
| PERF_COUNT_HW_CACHE_L1D << 0 | |
| (PERF_COUNT_HW_CACHE_OP_PREFETCH << 8) | |
| (PERF_COUNT_HW_CACHE_RESULT_MISS << 16) }, |
| }; |
| |
| |
| |
| struct perf_evlist *evsel_list; |
| |
| static bool system_wide = false; |
| static int run_idx = 0; |
| |
| static int run_count = 1; |
| static bool no_inherit = false; |
| static bool scale = true; |
| static bool no_aggr = false; |
| static pid_t target_pid = -1; |
| static pid_t target_tid = -1; |
| static pid_t child_pid = -1; |
| static bool null_run = false; |
| static int detailed_run = 0; |
| static bool sync_run = false; |
| static bool big_num = true; |
| static int big_num_opt = -1; |
| static const char *cpu_list; |
| static const char *csv_sep = NULL; |
| static bool csv_output = false; |
| static bool group = false; |
| static const char *output_name = NULL; |
| static FILE *output = NULL; |
| static int output_fd; |
| |
| static volatile int done = 0; |
| |
| struct stats |
| { |
| double n, mean, M2; |
| }; |
| |
| struct perf_stat { |
| struct stats res_stats[3]; |
| }; |
| |
| static int perf_evsel__alloc_stat_priv(struct perf_evsel *evsel) |
| { |
| evsel->priv = zalloc(sizeof(struct perf_stat)); |
| return evsel->priv == NULL ? -ENOMEM : 0; |
| } |
| |
| static void perf_evsel__free_stat_priv(struct perf_evsel *evsel) |
| { |
| free(evsel->priv); |
| evsel->priv = NULL; |
| } |
| |
| static void update_stats(struct stats *stats, u64 val) |
| { |
| double delta; |
| |
| stats->n++; |
| delta = val - stats->mean; |
| stats->mean += delta / stats->n; |
| stats->M2 += delta*(val - stats->mean); |
| } |
| |
| static double avg_stats(struct stats *stats) |
| { |
| return stats->mean; |
| } |
| |
| /* |
| * http://en.wikipedia.org/wiki/Algorithms_for_calculating_variance |
| * |
| * (\Sum n_i^2) - ((\Sum n_i)^2)/n |
| * s^2 = ------------------------------- |
| * n - 1 |
| * |
| * http://en.wikipedia.org/wiki/Stddev |
| * |
| * The std dev of the mean is related to the std dev by: |
| * |
| * s |
| * s_mean = ------- |
| * sqrt(n) |
| * |
| */ |
| static double stddev_stats(struct stats *stats) |
| { |
| double variance, variance_mean; |
| |
| if (!stats->n) |
| return 0.0; |
| |
| variance = stats->M2 / (stats->n - 1); |
| variance_mean = variance / stats->n; |
| |
| return sqrt(variance_mean); |
| } |
| |
| struct stats runtime_nsecs_stats[MAX_NR_CPUS]; |
| struct stats runtime_cycles_stats[MAX_NR_CPUS]; |
| struct stats runtime_stalled_cycles_front_stats[MAX_NR_CPUS]; |
| struct stats runtime_stalled_cycles_back_stats[MAX_NR_CPUS]; |
| struct stats runtime_branches_stats[MAX_NR_CPUS]; |
| struct stats runtime_cacherefs_stats[MAX_NR_CPUS]; |
| struct stats runtime_l1_dcache_stats[MAX_NR_CPUS]; |
| struct stats runtime_l1_icache_stats[MAX_NR_CPUS]; |
| struct stats runtime_ll_cache_stats[MAX_NR_CPUS]; |
| struct stats runtime_itlb_cache_stats[MAX_NR_CPUS]; |
| struct stats runtime_dtlb_cache_stats[MAX_NR_CPUS]; |
| struct stats walltime_nsecs_stats; |
| |
| static int create_perf_stat_counter(struct perf_evsel *evsel, |
| struct perf_evsel *first) |
| { |
| struct perf_event_attr *attr = &evsel->attr; |
| struct xyarray *group_fd = NULL; |
| |
| if (group && evsel != first) |
| group_fd = first->fd; |
| |
| if (scale) |
| attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED | |
| PERF_FORMAT_TOTAL_TIME_RUNNING; |
| |
| attr->inherit = !no_inherit; |
| |
| if (system_wide) |
| return perf_evsel__open_per_cpu(evsel, evsel_list->cpus, |
| group, group_fd); |
| if (target_pid == -1 && target_tid == -1) { |
| attr->disabled = 1; |
| attr->enable_on_exec = 1; |
| } |
| |
| return perf_evsel__open_per_thread(evsel, evsel_list->threads, |
| group, group_fd); |
| } |
| |
| /* |
| * Does the counter have nsecs as a unit? |
| */ |
| static inline int nsec_counter(struct perf_evsel *evsel) |
| { |
| if (perf_evsel__match(evsel, SOFTWARE, SW_CPU_CLOCK) || |
| perf_evsel__match(evsel, SOFTWARE, SW_TASK_CLOCK)) |
| return 1; |
| |
| return 0; |
| } |
| |
| /* |
| * Update various tracking values we maintain to print |
| * more semantic information such as miss/hit ratios, |
| * instruction rates, etc: |
| */ |
| static void update_shadow_stats(struct perf_evsel *counter, u64 *count) |
| { |
| if (perf_evsel__match(counter, SOFTWARE, SW_TASK_CLOCK)) |
| update_stats(&runtime_nsecs_stats[0], count[0]); |
| else if (perf_evsel__match(counter, HARDWARE, HW_CPU_CYCLES)) |
| update_stats(&runtime_cycles_stats[0], count[0]); |
| else if (perf_evsel__match(counter, HARDWARE, HW_STALLED_CYCLES_FRONTEND)) |
| update_stats(&runtime_stalled_cycles_front_stats[0], count[0]); |
| else if (perf_evsel__match(counter, HARDWARE, HW_STALLED_CYCLES_BACKEND)) |
| update_stats(&runtime_stalled_cycles_back_stats[0], count[0]); |
| else if (perf_evsel__match(counter, HARDWARE, HW_BRANCH_INSTRUCTIONS)) |
| update_stats(&runtime_branches_stats[0], count[0]); |
| else if (perf_evsel__match(counter, HARDWARE, HW_CACHE_REFERENCES)) |
| update_stats(&runtime_cacherefs_stats[0], count[0]); |
| else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_L1D)) |
| update_stats(&runtime_l1_dcache_stats[0], count[0]); |
| else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_L1I)) |
| update_stats(&runtime_l1_icache_stats[0], count[0]); |
| else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_LL)) |
| update_stats(&runtime_ll_cache_stats[0], count[0]); |
| else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_DTLB)) |
| update_stats(&runtime_dtlb_cache_stats[0], count[0]); |
| else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_ITLB)) |
| update_stats(&runtime_itlb_cache_stats[0], count[0]); |
| } |
| |
| /* |
| * Read out the results of a single counter: |
| * aggregate counts across CPUs in system-wide mode |
| */ |
| static int read_counter_aggr(struct perf_evsel *counter) |
| { |
| struct perf_stat *ps = counter->priv; |
| u64 *count = counter->counts->aggr.values; |
| int i; |
| |
| if (__perf_evsel__read(counter, evsel_list->cpus->nr, |
| evsel_list->threads->nr, scale) < 0) |
| return -1; |
| |
| for (i = 0; i < 3; i++) |
| update_stats(&ps->res_stats[i], count[i]); |
| |
| if (verbose) { |
| fprintf(output, "%s: %" PRIu64 " %" PRIu64 " %" PRIu64 "\n", |
| event_name(counter), count[0], count[1], count[2]); |
| } |
| |
| /* |
| * Save the full runtime - to allow normalization during printout: |
| */ |
| update_shadow_stats(counter, count); |
| |
| return 0; |
| } |
| |
| /* |
| * Read out the results of a single counter: |
| * do not aggregate counts across CPUs in system-wide mode |
| */ |
| static int read_counter(struct perf_evsel *counter) |
| { |
| u64 *count; |
| int cpu; |
| |
| for (cpu = 0; cpu < evsel_list->cpus->nr; cpu++) { |
| if (__perf_evsel__read_on_cpu(counter, cpu, 0, scale) < 0) |
| return -1; |
| |
| count = counter->counts->cpu[cpu].values; |
| |
| update_shadow_stats(counter, count); |
| } |
| |
| return 0; |
| } |
| |
| static int run_perf_stat(int argc __used, const char **argv) |
| { |
| unsigned long long t0, t1; |
| struct perf_evsel *counter, *first; |
| int status = 0; |
| int child_ready_pipe[2], go_pipe[2]; |
| const bool forks = (argc > 0); |
| char buf; |
| |
| if (forks && (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0)) { |
| perror("failed to create pipes"); |
| exit(1); |
| } |
| |
| if (forks) { |
| if ((child_pid = fork()) < 0) |
| perror("failed to fork"); |
| |
| if (!child_pid) { |
| close(child_ready_pipe[0]); |
| close(go_pipe[1]); |
| fcntl(go_pipe[0], F_SETFD, FD_CLOEXEC); |
| |
| /* |
| * Do a dummy execvp to get the PLT entry resolved, |
| * so we avoid the resolver overhead on the real |
| * execvp call. |
| */ |
| execvp("", (char **)argv); |
| |
| /* |
| * Tell the parent we're ready to go |
| */ |
| close(child_ready_pipe[1]); |
| |
| /* |
| * Wait until the parent tells us to go. |
| */ |
| if (read(go_pipe[0], &buf, 1) == -1) |
| perror("unable to read pipe"); |
| |
| execvp(argv[0], (char **)argv); |
| |
| perror(argv[0]); |
| exit(-1); |
| } |
| |
| if (target_tid == -1 && target_pid == -1 && !system_wide) |
| evsel_list->threads->map[0] = child_pid; |
| |
| /* |
| * Wait for the child to be ready to exec. |
| */ |
| close(child_ready_pipe[1]); |
| close(go_pipe[0]); |
| if (read(child_ready_pipe[0], &buf, 1) == -1) |
| perror("unable to read pipe"); |
| close(child_ready_pipe[0]); |
| } |
| |
| first = list_entry(evsel_list->entries.next, struct perf_evsel, node); |
| |
| list_for_each_entry(counter, &evsel_list->entries, node) { |
| if (create_perf_stat_counter(counter, first) < 0) { |
| if (errno == EINVAL || errno == ENOSYS || errno == ENOENT) { |
| if (verbose) |
| ui__warning("%s event is not supported by the kernel.\n", |
| event_name(counter)); |
| counter->supported = false; |
| continue; |
| } |
| |
| if (errno == EPERM || errno == EACCES) { |
| error("You may not have permission to collect %sstats.\n" |
| "\t Consider tweaking" |
| " /proc/sys/kernel/perf_event_paranoid or running as root.", |
| system_wide ? "system-wide " : ""); |
| } else { |
| error("open_counter returned with %d (%s). " |
| "/bin/dmesg may provide additional information.\n", |
| errno, strerror(errno)); |
| } |
| if (child_pid != -1) |
| kill(child_pid, SIGTERM); |
| die("Not all events could be opened.\n"); |
| return -1; |
| } |
| counter->supported = true; |
| } |
| |
| if (perf_evlist__set_filters(evsel_list)) { |
| error("failed to set filter with %d (%s)\n", errno, |
| strerror(errno)); |
| return -1; |
| } |
| |
| /* |
| * Enable counters and exec the command: |
| */ |
| t0 = rdclock(); |
| |
| if (forks) { |
| close(go_pipe[1]); |
| wait(&status); |
| if (WIFSIGNALED(status)) |
| psignal(WTERMSIG(status), argv[0]); |
| } else { |
| while(!done) sleep(1); |
| } |
| |
| t1 = rdclock(); |
| |
| update_stats(&walltime_nsecs_stats, t1 - t0); |
| |
| if (no_aggr) { |
| list_for_each_entry(counter, &evsel_list->entries, node) { |
| read_counter(counter); |
| perf_evsel__close_fd(counter, evsel_list->cpus->nr, 1); |
| } |
| } else { |
| list_for_each_entry(counter, &evsel_list->entries, node) { |
| read_counter_aggr(counter); |
| perf_evsel__close_fd(counter, evsel_list->cpus->nr, |
| evsel_list->threads->nr); |
| } |
| } |
| |
| return WEXITSTATUS(status); |
| } |
| |
| static void print_noise_pct(double total, double avg) |
| { |
| double pct = 0.0; |
| |
| if (avg) |
| pct = 100.0*total/avg; |
| |
| if (csv_output) |
| fprintf(output, "%s%.2f%%", csv_sep, pct); |
| else if (pct) |
| fprintf(output, " ( +-%6.2f%% )", pct); |
| } |
| |
| static void print_noise(struct perf_evsel *evsel, double avg) |
| { |
| struct perf_stat *ps; |
| |
| if (run_count == 1) |
| return; |
| |
| ps = evsel->priv; |
| print_noise_pct(stddev_stats(&ps->res_stats[0]), avg); |
| } |
| |
| static void nsec_printout(int cpu, struct perf_evsel *evsel, double avg) |
| { |
| double msecs = avg / 1e6; |
| char cpustr[16] = { '\0', }; |
| const char *fmt = csv_output ? "%s%.6f%s%s" : "%s%18.6f%s%-25s"; |
| |
| if (no_aggr) |
| sprintf(cpustr, "CPU%*d%s", |
| csv_output ? 0 : -4, |
| evsel_list->cpus->map[cpu], csv_sep); |
| |
| fprintf(output, fmt, cpustr, msecs, csv_sep, event_name(evsel)); |
| |
| if (evsel->cgrp) |
| fprintf(output, "%s%s", csv_sep, evsel->cgrp->name); |
| |
| if (csv_output) |
| return; |
| |
| if (perf_evsel__match(evsel, SOFTWARE, SW_TASK_CLOCK)) |
| fprintf(output, " # %8.3f CPUs utilized ", |
| avg / avg_stats(&walltime_nsecs_stats)); |
| } |
| |
| static void print_stalled_cycles_frontend(int cpu, struct perf_evsel *evsel __used, double avg) |
| { |
| double total, ratio = 0.0; |
| const char *color; |
| |
| total = avg_stats(&runtime_cycles_stats[cpu]); |
| |
| if (total) |
| ratio = avg / total * 100.0; |
| |
| color = PERF_COLOR_NORMAL; |
| if (ratio > 50.0) |
| color = PERF_COLOR_RED; |
| else if (ratio > 30.0) |
| color = PERF_COLOR_MAGENTA; |
| else if (ratio > 10.0) |
| color = PERF_COLOR_YELLOW; |
| |
| fprintf(output, " # "); |
| color_fprintf(output, color, "%6.2f%%", ratio); |
| fprintf(output, " frontend cycles idle "); |
| } |
| |
| static void print_stalled_cycles_backend(int cpu, struct perf_evsel *evsel __used, double avg) |
| { |
| double total, ratio = 0.0; |
| const char *color; |
| |
| total = avg_stats(&runtime_cycles_stats[cpu]); |
| |
| if (total) |
| ratio = avg / total * 100.0; |
| |
| color = PERF_COLOR_NORMAL; |
| if (ratio > 75.0) |
| color = PERF_COLOR_RED; |
| else if (ratio > 50.0) |
| color = PERF_COLOR_MAGENTA; |
| else if (ratio > 20.0) |
| color = PERF_COLOR_YELLOW; |
| |
| fprintf(output, " # "); |
| color_fprintf(output, color, "%6.2f%%", ratio); |
| fprintf(output, " backend cycles idle "); |
| } |
| |
| static void print_branch_misses(int cpu, struct perf_evsel *evsel __used, double avg) |
| { |
| double total, ratio = 0.0; |
| const char *color; |
| |
| total = avg_stats(&runtime_branches_stats[cpu]); |
| |
| if (total) |
| ratio = avg / total * 100.0; |
| |
| color = PERF_COLOR_NORMAL; |
| if (ratio > 20.0) |
| color = PERF_COLOR_RED; |
| else if (ratio > 10.0) |
| color = PERF_COLOR_MAGENTA; |
| else if (ratio > 5.0) |
| color = PERF_COLOR_YELLOW; |
| |
| fprintf(output, " # "); |
| color_fprintf(output, color, "%6.2f%%", ratio); |
| fprintf(output, " of all branches "); |
| } |
| |
| static void print_l1_dcache_misses(int cpu, struct perf_evsel *evsel __used, double avg) |
| { |
| double total, ratio = 0.0; |
| const char *color; |
| |
| total = avg_stats(&runtime_l1_dcache_stats[cpu]); |
| |
| if (total) |
| ratio = avg / total * 100.0; |
| |
| color = PERF_COLOR_NORMAL; |
| if (ratio > 20.0) |
| color = PERF_COLOR_RED; |
| else if (ratio > 10.0) |
| color = PERF_COLOR_MAGENTA; |
| else if (ratio > 5.0) |
| color = PERF_COLOR_YELLOW; |
| |
| fprintf(output, " # "); |
| color_fprintf(output, color, "%6.2f%%", ratio); |
| fprintf(output, " of all L1-dcache hits "); |
| } |
| |
| static void print_l1_icache_misses(int cpu, struct perf_evsel *evsel __used, double avg) |
| { |
| double total, ratio = 0.0; |
| const char *color; |
| |
| total = avg_stats(&runtime_l1_icache_stats[cpu]); |
| |
| if (total) |
| ratio = avg / total * 100.0; |
| |
| color = PERF_COLOR_NORMAL; |
| if (ratio > 20.0) |
| color = PERF_COLOR_RED; |
| else if (ratio > 10.0) |
| color = PERF_COLOR_MAGENTA; |
| else if (ratio > 5.0) |
| color = PERF_COLOR_YELLOW; |
| |
| fprintf(output, " # "); |
| color_fprintf(output, color, "%6.2f%%", ratio); |
| fprintf(output, " of all L1-icache hits "); |
| } |
| |
| static void print_dtlb_cache_misses(int cpu, struct perf_evsel *evsel __used, double avg) |
| { |
| double total, ratio = 0.0; |
| const char *color; |
| |
| total = avg_stats(&runtime_dtlb_cache_stats[cpu]); |
| |
| if (total) |
| ratio = avg / total * 100.0; |
| |
| color = PERF_COLOR_NORMAL; |
| if (ratio > 20.0) |
| color = PERF_COLOR_RED; |
| else if (ratio > 10.0) |
| color = PERF_COLOR_MAGENTA; |
| else if (ratio > 5.0) |
| color = PERF_COLOR_YELLOW; |
| |
| fprintf(output, " # "); |
| color_fprintf(output, color, "%6.2f%%", ratio); |
| fprintf(output, " of all dTLB cache hits "); |
| } |
| |
| static void print_itlb_cache_misses(int cpu, struct perf_evsel *evsel __used, double avg) |
| { |
| double total, ratio = 0.0; |
| const char *color; |
| |
| total = avg_stats(&runtime_itlb_cache_stats[cpu]); |
| |
| if (total) |
| ratio = avg / total * 100.0; |
| |
| color = PERF_COLOR_NORMAL; |
| if (ratio > 20.0) |
| color = PERF_COLOR_RED; |
| else if (ratio > 10.0) |
| color = PERF_COLOR_MAGENTA; |
| else if (ratio > 5.0) |
| color = PERF_COLOR_YELLOW; |
| |
| fprintf(output, " # "); |
| color_fprintf(output, color, "%6.2f%%", ratio); |
| fprintf(output, " of all iTLB cache hits "); |
| } |
| |
| static void print_ll_cache_misses(int cpu, struct perf_evsel *evsel __used, double avg) |
| { |
| double total, ratio = 0.0; |
| const char *color; |
| |
| total = avg_stats(&runtime_ll_cache_stats[cpu]); |
| |
| if (total) |
| ratio = avg / total * 100.0; |
| |
| color = PERF_COLOR_NORMAL; |
| if (ratio > 20.0) |
| color = PERF_COLOR_RED; |
| else if (ratio > 10.0) |
| color = PERF_COLOR_MAGENTA; |
| else if (ratio > 5.0) |
| color = PERF_COLOR_YELLOW; |
| |
| fprintf(output, " # "); |
| color_fprintf(output, color, "%6.2f%%", ratio); |
| fprintf(output, " of all LL-cache hits "); |
| } |
| |
| static void abs_printout(int cpu, struct perf_evsel *evsel, double avg) |
| { |
| double total, ratio = 0.0; |
| char cpustr[16] = { '\0', }; |
| const char *fmt; |
| |
| if (csv_output) |
| fmt = "%s%.0f%s%s"; |
| else if (big_num) |
| fmt = "%s%'18.0f%s%-25s"; |
| else |
| fmt = "%s%18.0f%s%-25s"; |
| |
| if (no_aggr) |
| sprintf(cpustr, "CPU%*d%s", |
| csv_output ? 0 : -4, |
| evsel_list->cpus->map[cpu], csv_sep); |
| else |
| cpu = 0; |
| |
| fprintf(output, fmt, cpustr, avg, csv_sep, event_name(evsel)); |
| |
| if (evsel->cgrp) |
| fprintf(output, "%s%s", csv_sep, evsel->cgrp->name); |
| |
| if (csv_output) |
| return; |
| |
| if (perf_evsel__match(evsel, HARDWARE, HW_INSTRUCTIONS)) { |
| total = avg_stats(&runtime_cycles_stats[cpu]); |
| |
| if (total) |
| ratio = avg / total; |
| |
| fprintf(output, " # %5.2f insns per cycle ", ratio); |
| |
| total = avg_stats(&runtime_stalled_cycles_front_stats[cpu]); |
| total = max(total, avg_stats(&runtime_stalled_cycles_back_stats[cpu])); |
| |
| if (total && avg) { |
| ratio = total / avg; |
| fprintf(output, "\n # %5.2f stalled cycles per insn", ratio); |
| } |
| |
| } else if (perf_evsel__match(evsel, HARDWARE, HW_BRANCH_MISSES) && |
| runtime_branches_stats[cpu].n != 0) { |
| print_branch_misses(cpu, evsel, avg); |
| } else if ( |
| evsel->attr.type == PERF_TYPE_HW_CACHE && |
| evsel->attr.config == ( PERF_COUNT_HW_CACHE_L1D | |
| ((PERF_COUNT_HW_CACHE_OP_READ) << 8) | |
| ((PERF_COUNT_HW_CACHE_RESULT_MISS) << 16)) && |
| runtime_l1_dcache_stats[cpu].n != 0) { |
| print_l1_dcache_misses(cpu, evsel, avg); |
| } else if ( |
| evsel->attr.type == PERF_TYPE_HW_CACHE && |
| evsel->attr.config == ( PERF_COUNT_HW_CACHE_L1I | |
| ((PERF_COUNT_HW_CACHE_OP_READ) << 8) | |
| ((PERF_COUNT_HW_CACHE_RESULT_MISS) << 16)) && |
| runtime_l1_icache_stats[cpu].n != 0) { |
| print_l1_icache_misses(cpu, evsel, avg); |
| } else if ( |
| evsel->attr.type == PERF_TYPE_HW_CACHE && |
| evsel->attr.config == ( PERF_COUNT_HW_CACHE_DTLB | |
| ((PERF_COUNT_HW_CACHE_OP_READ) << 8) | |
| ((PERF_COUNT_HW_CACHE_RESULT_MISS) << 16)) && |
| runtime_dtlb_cache_stats[cpu].n != 0) { |
| print_dtlb_cache_misses(cpu, evsel, avg); |
| } else if ( |
| evsel->attr.type == PERF_TYPE_HW_CACHE && |
| evsel->attr.config == ( PERF_COUNT_HW_CACHE_ITLB | |
| ((PERF_COUNT_HW_CACHE_OP_READ) << 8) | |
| ((PERF_COUNT_HW_CACHE_RESULT_MISS) << 16)) && |
| runtime_itlb_cache_stats[cpu].n != 0) { |
| print_itlb_cache_misses(cpu, evsel, avg); |
| } else if ( |
| evsel->attr.type == PERF_TYPE_HW_CACHE && |
| evsel->attr.config == ( PERF_COUNT_HW_CACHE_LL | |
| ((PERF_COUNT_HW_CACHE_OP_READ) << 8) | |
| ((PERF_COUNT_HW_CACHE_RESULT_MISS) << 16)) && |
| runtime_ll_cache_stats[cpu].n != 0) { |
| print_ll_cache_misses(cpu, evsel, avg); |
| } else if (perf_evsel__match(evsel, HARDWARE, HW_CACHE_MISSES) && |
| runtime_cacherefs_stats[cpu].n != 0) { |
| total = avg_stats(&runtime_cacherefs_stats[cpu]); |
| |
| if (total) |
| ratio = avg * 100 / total; |
| |
| fprintf(output, " # %8.3f %% of all cache refs ", ratio); |
| |
| } else if (perf_evsel__match(evsel, HARDWARE, HW_STALLED_CYCLES_FRONTEND)) { |
| print_stalled_cycles_frontend(cpu, evsel, avg); |
| } else if (perf_evsel__match(evsel, HARDWARE, HW_STALLED_CYCLES_BACKEND)) { |
| print_stalled_cycles_backend(cpu, evsel, avg); |
| } else if (perf_evsel__match(evsel, HARDWARE, HW_CPU_CYCLES)) { |
| total = avg_stats(&runtime_nsecs_stats[cpu]); |
| |
| if (total) |
| ratio = 1.0 * avg / total; |
| |
| fprintf(output, " # %8.3f GHz ", ratio); |
| } else if (runtime_nsecs_stats[cpu].n != 0) { |
| total = avg_stats(&runtime_nsecs_stats[cpu]); |
| |
| if (total) |
| ratio = 1000.0 * avg / total; |
| |
| fprintf(output, " # %8.3f M/sec ", ratio); |
| } else { |
| fprintf(output, " "); |
| } |
| } |
| |
| /* |
| * Print out the results of a single counter: |
| * aggregated counts in system-wide mode |
| */ |
| static void print_counter_aggr(struct perf_evsel *counter) |
| { |
| struct perf_stat *ps = counter->priv; |
| double avg = avg_stats(&ps->res_stats[0]); |
| int scaled = counter->counts->scaled; |
| |
| if (scaled == -1) { |
| fprintf(output, "%*s%s%*s", |
| csv_output ? 0 : 18, |
| counter->supported ? CNTR_NOT_COUNTED : CNTR_NOT_SUPPORTED, |
| csv_sep, |
| csv_output ? 0 : -24, |
| event_name(counter)); |
| |
| if (counter->cgrp) |
| fprintf(output, "%s%s", csv_sep, counter->cgrp->name); |
| |
| fputc('\n', output); |
| return; |
| } |
| |
| if (nsec_counter(counter)) |
| nsec_printout(-1, counter, avg); |
| else |
| abs_printout(-1, counter, avg); |
| |
| print_noise(counter, avg); |
| |
| if (csv_output) { |
| fputc('\n', output); |
| return; |
| } |
| |
| if (scaled) { |
| double avg_enabled, avg_running; |
| |
| avg_enabled = avg_stats(&ps->res_stats[1]); |
| avg_running = avg_stats(&ps->res_stats[2]); |
| |
| fprintf(output, " [%5.2f%%]", 100 * avg_running / avg_enabled); |
| } |
| fprintf(output, "\n"); |
| } |
| |
| /* |
| * Print out the results of a single counter: |
| * does not use aggregated count in system-wide |
| */ |
| static void print_counter(struct perf_evsel *counter) |
| { |
| u64 ena, run, val; |
| int cpu; |
| |
| for (cpu = 0; cpu < evsel_list->cpus->nr; cpu++) { |
| val = counter->counts->cpu[cpu].val; |
| ena = counter->counts->cpu[cpu].ena; |
| run = counter->counts->cpu[cpu].run; |
| if (run == 0 || ena == 0) { |
| fprintf(output, "CPU%*d%s%*s%s%*s", |
| csv_output ? 0 : -4, |
| evsel_list->cpus->map[cpu], csv_sep, |
| csv_output ? 0 : 18, |
| counter->supported ? CNTR_NOT_COUNTED : CNTR_NOT_SUPPORTED, |
| csv_sep, |
| csv_output ? 0 : -24, |
| event_name(counter)); |
| |
| if (counter->cgrp) |
| fprintf(output, "%s%s", |
| csv_sep, counter->cgrp->name); |
| |
| fputc('\n', output); |
| continue; |
| } |
| |
| if (nsec_counter(counter)) |
| nsec_printout(cpu, counter, val); |
| else |
| abs_printout(cpu, counter, val); |
| |
| if (!csv_output) { |
| print_noise(counter, 1.0); |
| |
| if (run != ena) |
| fprintf(output, " (%.2f%%)", |
| 100.0 * run / ena); |
| } |
| fputc('\n', output); |
| } |
| } |
| |
| static void print_stat(int argc, const char **argv) |
| { |
| struct perf_evsel *counter; |
| int i; |
| |
| fflush(stdout); |
| |
| if (!csv_output) { |
| fprintf(output, "\n"); |
| fprintf(output, " Performance counter stats for "); |
| if(target_pid == -1 && target_tid == -1) { |
| fprintf(output, "\'%s", argv[0]); |
| for (i = 1; i < argc; i++) |
| fprintf(output, " %s", argv[i]); |
| } else if (target_pid != -1) |
| fprintf(output, "process id \'%d", target_pid); |
| else |
| fprintf(output, "thread id \'%d", target_tid); |
| |
| fprintf(output, "\'"); |
| if (run_count > 1) |
| fprintf(output, " (%d runs)", run_count); |
| fprintf(output, ":\n\n"); |
| } |
| |
| if (no_aggr) { |
| list_for_each_entry(counter, &evsel_list->entries, node) |
| print_counter(counter); |
| } else { |
| list_for_each_entry(counter, &evsel_list->entries, node) |
| print_counter_aggr(counter); |
| } |
| |
| if (!csv_output) { |
| if (!null_run) |
| fprintf(output, "\n"); |
| fprintf(output, " %17.9f seconds time elapsed", |
| avg_stats(&walltime_nsecs_stats)/1e9); |
| if (run_count > 1) { |
| fprintf(output, " "); |
| print_noise_pct(stddev_stats(&walltime_nsecs_stats), |
| avg_stats(&walltime_nsecs_stats)); |
| } |
| fprintf(output, "\n\n"); |
| } |
| } |
| |
| static volatile int signr = -1; |
| |
| static void skip_signal(int signo) |
| { |
| if(child_pid == -1) |
| done = 1; |
| |
| signr = signo; |
| } |
| |
| static void sig_atexit(void) |
| { |
| if (child_pid != -1) |
| kill(child_pid, SIGTERM); |
| |
| if (signr == -1) |
| return; |
| |
| signal(signr, SIG_DFL); |
| kill(getpid(), signr); |
| } |
| |
| static const char * const stat_usage[] = { |
| "perf stat [<options>] [<command>]", |
| NULL |
| }; |
| |
| static int stat__set_big_num(const struct option *opt __used, |
| const char *s __used, int unset) |
| { |
| big_num_opt = unset ? 0 : 1; |
| return 0; |
| } |
| |
| static bool append_file; |
| |
| static const struct option options[] = { |
| OPT_CALLBACK('e', "event", &evsel_list, "event", |
| "event selector. use 'perf list' to list available events", |
| parse_events_option), |
| OPT_CALLBACK(0, "filter", &evsel_list, "filter", |
| "event filter", parse_filter), |
| OPT_BOOLEAN('i', "no-inherit", &no_inherit, |
| "child tasks do not inherit counters"), |
| OPT_INTEGER('p', "pid", &target_pid, |
| "stat events on existing process id"), |
| OPT_INTEGER('t', "tid", &target_tid, |
| "stat events on existing thread id"), |
| OPT_BOOLEAN('a', "all-cpus", &system_wide, |
| "system-wide collection from all CPUs"), |
| OPT_BOOLEAN('g', "group", &group, |
| "put the counters into a counter group"), |
| OPT_BOOLEAN('c', "scale", &scale, |
| "scale/normalize counters"), |
| OPT_INCR('v', "verbose", &verbose, |
| "be more verbose (show counter open errors, etc)"), |
| OPT_INTEGER('r', "repeat", &run_count, |
| "repeat command and print average + stddev (max: 100)"), |
| OPT_BOOLEAN('n', "null", &null_run, |
| "null run - dont start any counters"), |
| OPT_INCR('d', "detailed", &detailed_run, |
| "detailed run - start a lot of events"), |
| OPT_BOOLEAN('S', "sync", &sync_run, |
| "call sync() before starting a run"), |
| OPT_CALLBACK_NOOPT('B', "big-num", NULL, NULL, |
| "print large numbers with thousands\' separators", |
| stat__set_big_num), |
| OPT_STRING('C', "cpu", &cpu_list, "cpu", |
| "list of cpus to monitor in system-wide"), |
| OPT_BOOLEAN('A', "no-aggr", &no_aggr, |
| "disable CPU count aggregation"), |
| OPT_STRING('x', "field-separator", &csv_sep, "separator", |
| "print counts with custom separator"), |
| OPT_CALLBACK('G', "cgroup", &evsel_list, "name", |
| "monitor event in cgroup name only", |
| parse_cgroups), |
| OPT_STRING('o', "output", &output_name, "file", |
| "output file name"), |
| OPT_BOOLEAN(0, "append", &append_file, "append to the output file"), |
| OPT_INTEGER(0, "log-fd", &output_fd, |
| "log output to fd, instead of stderr"), |
| OPT_END() |
| }; |
| |
| /* |
| * Add default attributes, if there were no attributes specified or |
| * if -d/--detailed, -d -d or -d -d -d is used: |
| */ |
| static int add_default_attributes(void) |
| { |
| /* Set attrs if no event is selected and !null_run: */ |
| if (null_run) |
| return 0; |
| |
| if (!evsel_list->nr_entries) { |
| if (perf_evlist__add_attrs_array(evsel_list, default_attrs) < 0) |
| return -1; |
| } |
| |
| /* Detailed events get appended to the event list: */ |
| |
| if (detailed_run < 1) |
| return 0; |
| |
| /* Append detailed run extra attributes: */ |
| if (perf_evlist__add_attrs_array(evsel_list, detailed_attrs) < 0) |
| return -1; |
| |
| if (detailed_run < 2) |
| return 0; |
| |
| /* Append very detailed run extra attributes: */ |
| if (perf_evlist__add_attrs_array(evsel_list, very_detailed_attrs) < 0) |
| return -1; |
| |
| if (detailed_run < 3) |
| return 0; |
| |
| /* Append very, very detailed run extra attributes: */ |
| return perf_evlist__add_attrs_array(evsel_list, very_very_detailed_attrs); |
| } |
| |
| int cmd_stat(int argc, const char **argv, const char *prefix __used) |
| { |
| struct perf_evsel *pos; |
| int status = -ENOMEM; |
| const char *mode; |
| |
| setlocale(LC_ALL, ""); |
| |
| evsel_list = perf_evlist__new(NULL, NULL); |
| if (evsel_list == NULL) |
| return -ENOMEM; |
| |
| argc = parse_options(argc, argv, options, stat_usage, |
| PARSE_OPT_STOP_AT_NON_OPTION); |
| |
| output = stderr; |
| if (output_name && strcmp(output_name, "-")) |
| output = NULL; |
| |
| if (output_name && output_fd) { |
| fprintf(stderr, "cannot use both --output and --log-fd\n"); |
| usage_with_options(stat_usage, options); |
| } |
| if (!output) { |
| struct timespec tm; |
| mode = append_file ? "a" : "w"; |
| |
| output = fopen(output_name, mode); |
| if (!output) { |
| perror("failed to create output file"); |
| exit(-1); |
| } |
| clock_gettime(CLOCK_REALTIME, &tm); |
| fprintf(output, "# started on %s\n", ctime(&tm.tv_sec)); |
| } else if (output_fd != 2) { |
| mode = append_file ? "a" : "w"; |
| output = fdopen(output_fd, mode); |
| if (!output) { |
| perror("Failed opening logfd"); |
| return -errno; |
| } |
| } |
| |
| if (csv_sep) { |
| csv_output = true; |
| if (!strcmp(csv_sep, "\\t")) |
| csv_sep = "\t"; |
| } else |
| csv_sep = DEFAULT_SEPARATOR; |
| |
| /* |
| * let the spreadsheet do the pretty-printing |
| */ |
| if (csv_output) { |
| /* User explicitly passed -B? */ |
| if (big_num_opt == 1) { |
| fprintf(stderr, "-B option not supported with -x\n"); |
| usage_with_options(stat_usage, options); |
| } else /* Nope, so disable big number formatting */ |
| big_num = false; |
| } else if (big_num_opt == 0) /* User passed --no-big-num */ |
| big_num = false; |
| |
| if (!argc && target_pid == -1 && target_tid == -1) |
| usage_with_options(stat_usage, options); |
| if (run_count <= 0) |
| usage_with_options(stat_usage, options); |
| |
| /* no_aggr, cgroup are for system-wide only */ |
| if ((no_aggr || nr_cgroups) && !system_wide) { |
| fprintf(stderr, "both cgroup and no-aggregation " |
| "modes only available in system-wide mode\n"); |
| |
| usage_with_options(stat_usage, options); |
| } |
| |
| if (add_default_attributes()) |
| goto out; |
| |
| if (target_pid != -1) |
| target_tid = target_pid; |
| |
| evsel_list->threads = thread_map__new(target_pid, target_tid); |
| if (evsel_list->threads == NULL) { |
| pr_err("Problems finding threads of monitor\n"); |
| usage_with_options(stat_usage, options); |
| } |
| |
| if (system_wide) |
| evsel_list->cpus = cpu_map__new(cpu_list); |
| else |
| evsel_list->cpus = cpu_map__dummy_new(); |
| |
| if (evsel_list->cpus == NULL) { |
| perror("failed to parse CPUs map"); |
| usage_with_options(stat_usage, options); |
| return -1; |
| } |
| |
| list_for_each_entry(pos, &evsel_list->entries, node) { |
| if (perf_evsel__alloc_stat_priv(pos) < 0 || |
| perf_evsel__alloc_counts(pos, evsel_list->cpus->nr) < 0 || |
| perf_evsel__alloc_fd(pos, evsel_list->cpus->nr, evsel_list->threads->nr) < 0) |
| goto out_free_fd; |
| } |
| |
| /* |
| * We dont want to block the signals - that would cause |
| * child tasks to inherit that and Ctrl-C would not work. |
| * What we want is for Ctrl-C to work in the exec()-ed |
| * task, but being ignored by perf stat itself: |
| */ |
| atexit(sig_atexit); |
| signal(SIGINT, skip_signal); |
| signal(SIGALRM, skip_signal); |
| signal(SIGABRT, skip_signal); |
| |
| status = 0; |
| for (run_idx = 0; run_idx < run_count; run_idx++) { |
| if (run_count != 1 && verbose) |
| fprintf(output, "[ perf stat: executing run #%d ... ]\n", |
| run_idx + 1); |
| |
| if (sync_run) |
| sync(); |
| |
| status = run_perf_stat(argc, argv); |
| } |
| |
| if (status != -1) |
| print_stat(argc, argv); |
| out_free_fd: |
| list_for_each_entry(pos, &evsel_list->entries, node) |
| perf_evsel__free_stat_priv(pos); |
| perf_evlist__delete_maps(evsel_list); |
| out: |
| perf_evlist__delete(evsel_list); |
| return status; |
| } |