| /* |
| * MachZ ZF-Logic Watchdog Timer driver for Linux |
| * |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * The author does NOT admit liability nor provide warranty for |
| * any of this software. This material is provided "AS-IS" in |
| * the hope that it may be useful for others. |
| * |
| * Author: Fernando Fuganti <fuganti@conectiva.com.br> |
| * |
| * Based on sbc60xxwdt.c by Jakob Oestergaard |
| * |
| * |
| * We have two timers (wd#1, wd#2) driven by a 32 KHz clock with the |
| * following periods: |
| * wd#1 - 2 seconds; |
| * wd#2 - 7.2 ms; |
| * After the expiration of wd#1, it can generate a NMI, SCI, SMI, or |
| * a system RESET and it starts wd#2 that unconditionaly will RESET |
| * the system when the counter reaches zero. |
| * |
| * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> |
| * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/types.h> |
| #include <linux/timer.h> |
| #include <linux/jiffies.h> |
| #include <linux/miscdevice.h> |
| #include <linux/watchdog.h> |
| #include <linux/fs.h> |
| #include <linux/ioport.h> |
| #include <linux/notifier.h> |
| #include <linux/reboot.h> |
| #include <linux/init.h> |
| |
| #include <asm/io.h> |
| #include <asm/uaccess.h> |
| #include <asm/system.h> |
| |
| /* ports */ |
| #define ZF_IOBASE 0x218 |
| #define INDEX 0x218 |
| #define DATA_B 0x219 |
| #define DATA_W 0x21A |
| #define DATA_D 0x21A |
| |
| /* indexes */ /* size */ |
| #define ZFL_VERSION 0x02 /* 16 */ |
| #define CONTROL 0x10 /* 16 */ |
| #define STATUS 0x12 /* 8 */ |
| #define COUNTER_1 0x0C /* 16 */ |
| #define COUNTER_2 0x0E /* 8 */ |
| #define PULSE_LEN 0x0F /* 8 */ |
| |
| /* controls */ |
| #define ENABLE_WD1 0x0001 |
| #define ENABLE_WD2 0x0002 |
| #define RESET_WD1 0x0010 |
| #define RESET_WD2 0x0020 |
| #define GEN_SCI 0x0100 |
| #define GEN_NMI 0x0200 |
| #define GEN_SMI 0x0400 |
| #define GEN_RESET 0x0800 |
| |
| |
| /* utilities */ |
| |
| #define WD1 0 |
| #define WD2 1 |
| |
| #define zf_writew(port, data) { outb(port, INDEX); outw(data, DATA_W); } |
| #define zf_writeb(port, data) { outb(port, INDEX); outb(data, DATA_B); } |
| #define zf_get_ZFL_version() zf_readw(ZFL_VERSION) |
| |
| |
| static unsigned short zf_readw(unsigned char port) |
| { |
| outb(port, INDEX); |
| return inw(DATA_W); |
| } |
| |
| |
| MODULE_AUTHOR("Fernando Fuganti <fuganti@conectiva.com.br>"); |
| MODULE_DESCRIPTION("MachZ ZF-Logic Watchdog driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |
| |
| #ifdef CONFIG_WATCHDOG_NOWAYOUT |
| static int nowayout = 1; |
| #else |
| static int nowayout = 0; |
| #endif |
| |
| module_param(nowayout, int, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); |
| |
| #define PFX "machzwd" |
| |
| static struct watchdog_info zf_info = { |
| .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, |
| .firmware_version = 1, |
| .identity = "ZF-Logic watchdog", |
| }; |
| |
| |
| /* |
| * action refers to action taken when watchdog resets |
| * 0 = GEN_RESET |
| * 1 = GEN_SMI |
| * 2 = GEN_NMI |
| * 3 = GEN_SCI |
| * defaults to GEN_RESET (0) |
| */ |
| static int action = 0; |
| module_param(action, int, 0); |
| MODULE_PARM_DESC(action, "after watchdog resets, generate: 0 = RESET(*) 1 = SMI 2 = NMI 3 = SCI"); |
| |
| static int zf_action = GEN_RESET; |
| static unsigned long zf_is_open; |
| static char zf_expect_close; |
| static spinlock_t zf_lock; |
| static spinlock_t zf_port_lock; |
| static struct timer_list zf_timer; |
| static unsigned long next_heartbeat = 0; |
| |
| |
| /* timeout for user land heart beat (10 seconds) */ |
| #define ZF_USER_TIMEO (HZ*10) |
| |
| /* timeout for hardware watchdog (~500ms) */ |
| #define ZF_HW_TIMEO (HZ/2) |
| |
| /* number of ticks on WD#1 (driven by a 32KHz clock, 2s) */ |
| #define ZF_CTIMEOUT 0xffff |
| |
| #ifndef ZF_DEBUG |
| # define dprintk(format, args...) |
| #else |
| # define dprintk(format, args...) printk(KERN_DEBUG PFX ":%s:%d: " format, __FUNCTION__, __LINE__ , ## args) |
| #endif |
| |
| |
| static inline void zf_set_status(unsigned char new) |
| { |
| zf_writeb(STATUS, new); |
| } |
| |
| |
| /* CONTROL register functions */ |
| |
| static inline unsigned short zf_get_control(void) |
| { |
| return zf_readw(CONTROL); |
| } |
| |
| static inline void zf_set_control(unsigned short new) |
| { |
| zf_writew(CONTROL, new); |
| } |
| |
| |
| /* WD#? counter functions */ |
| /* |
| * Just set counter value |
| */ |
| |
| static inline void zf_set_timer(unsigned short new, unsigned char n) |
| { |
| switch(n){ |
| case WD1: |
| zf_writew(COUNTER_1, new); |
| case WD2: |
| zf_writeb(COUNTER_2, new > 0xff ? 0xff : new); |
| default: |
| return; |
| } |
| } |
| |
| /* |
| * stop hardware timer |
| */ |
| static void zf_timer_off(void) |
| { |
| unsigned int ctrl_reg = 0; |
| unsigned long flags; |
| |
| /* stop internal ping */ |
| del_timer_sync(&zf_timer); |
| |
| spin_lock_irqsave(&zf_port_lock, flags); |
| /* stop watchdog timer */ |
| ctrl_reg = zf_get_control(); |
| ctrl_reg |= (ENABLE_WD1|ENABLE_WD2); /* disable wd1 and wd2 */ |
| ctrl_reg &= ~(ENABLE_WD1|ENABLE_WD2); |
| zf_set_control(ctrl_reg); |
| spin_unlock_irqrestore(&zf_port_lock, flags); |
| |
| printk(KERN_INFO PFX ": Watchdog timer is now disabled\n"); |
| } |
| |
| |
| /* |
| * start hardware timer |
| */ |
| static void zf_timer_on(void) |
| { |
| unsigned int ctrl_reg = 0; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&zf_port_lock, flags); |
| |
| zf_writeb(PULSE_LEN, 0xff); |
| |
| zf_set_timer(ZF_CTIMEOUT, WD1); |
| |
| /* user land ping */ |
| next_heartbeat = jiffies + ZF_USER_TIMEO; |
| |
| /* start the timer for internal ping */ |
| zf_timer.expires = jiffies + ZF_HW_TIMEO; |
| |
| add_timer(&zf_timer); |
| |
| /* start watchdog timer */ |
| ctrl_reg = zf_get_control(); |
| ctrl_reg |= (ENABLE_WD1|zf_action); |
| zf_set_control(ctrl_reg); |
| spin_unlock_irqrestore(&zf_port_lock, flags); |
| |
| printk(KERN_INFO PFX ": Watchdog timer is now enabled\n"); |
| } |
| |
| |
| static void zf_ping(unsigned long data) |
| { |
| unsigned int ctrl_reg = 0; |
| unsigned long flags; |
| |
| zf_writeb(COUNTER_2, 0xff); |
| |
| if(time_before(jiffies, next_heartbeat)){ |
| |
| dprintk("time_before: %ld\n", next_heartbeat - jiffies); |
| |
| /* |
| * reset event is activated by transition from 0 to 1 on |
| * RESET_WD1 bit and we assume that it is already zero... |
| */ |
| |
| spin_lock_irqsave(&zf_port_lock, flags); |
| ctrl_reg = zf_get_control(); |
| ctrl_reg |= RESET_WD1; |
| zf_set_control(ctrl_reg); |
| |
| /* ...and nothing changes until here */ |
| ctrl_reg &= ~(RESET_WD1); |
| zf_set_control(ctrl_reg); |
| spin_unlock_irqrestore(&zf_port_lock, flags); |
| |
| zf_timer.expires = jiffies + ZF_HW_TIMEO; |
| add_timer(&zf_timer); |
| }else{ |
| printk(KERN_CRIT PFX ": I will reset your machine\n"); |
| } |
| } |
| |
| static ssize_t zf_write(struct file *file, const char __user *buf, size_t count, |
| loff_t *ppos) |
| { |
| /* See if we got the magic character */ |
| if(count){ |
| |
| /* |
| * no need to check for close confirmation |
| * no way to disable watchdog ;) |
| */ |
| if (!nowayout) { |
| size_t ofs; |
| |
| /* |
| * note: just in case someone wrote the magic character |
| * five months ago... |
| */ |
| zf_expect_close = 0; |
| |
| /* now scan */ |
| for (ofs = 0; ofs != count; ofs++){ |
| char c; |
| if (get_user(c, buf + ofs)) |
| return -EFAULT; |
| if (c == 'V'){ |
| zf_expect_close = 42; |
| dprintk("zf_expect_close = 42\n"); |
| } |
| } |
| } |
| |
| /* |
| * Well, anyhow someone wrote to us, |
| * we should return that favour |
| */ |
| next_heartbeat = jiffies + ZF_USER_TIMEO; |
| dprintk("user ping at %ld\n", jiffies); |
| |
| } |
| |
| return count; |
| } |
| |
| static int zf_ioctl(struct inode *inode, struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| void __user *argp = (void __user *)arg; |
| int __user *p = argp; |
| switch(cmd){ |
| case WDIOC_GETSUPPORT: |
| if (copy_to_user(argp, &zf_info, sizeof(zf_info))) |
| return -EFAULT; |
| break; |
| |
| case WDIOC_GETSTATUS: |
| return put_user(0, p); |
| |
| case WDIOC_KEEPALIVE: |
| zf_ping(0); |
| break; |
| |
| default: |
| return -ENOIOCTLCMD; |
| } |
| |
| return 0; |
| } |
| |
| static int zf_open(struct inode *inode, struct file *file) |
| { |
| spin_lock(&zf_lock); |
| if(test_and_set_bit(0, &zf_is_open)) { |
| spin_unlock(&zf_lock); |
| return -EBUSY; |
| } |
| |
| if (nowayout) |
| __module_get(THIS_MODULE); |
| |
| spin_unlock(&zf_lock); |
| |
| zf_timer_on(); |
| |
| return nonseekable_open(inode, file); |
| } |
| |
| static int zf_close(struct inode *inode, struct file *file) |
| { |
| if(zf_expect_close == 42){ |
| zf_timer_off(); |
| } else { |
| del_timer(&zf_timer); |
| printk(KERN_ERR PFX ": device file closed unexpectedly. Will not stop the WDT!\n"); |
| } |
| |
| spin_lock(&zf_lock); |
| clear_bit(0, &zf_is_open); |
| spin_unlock(&zf_lock); |
| |
| zf_expect_close = 0; |
| |
| return 0; |
| } |
| |
| /* |
| * Notifier for system down |
| */ |
| |
| static int zf_notify_sys(struct notifier_block *this, unsigned long code, |
| void *unused) |
| { |
| if(code == SYS_DOWN || code == SYS_HALT){ |
| zf_timer_off(); |
| } |
| |
| return NOTIFY_DONE; |
| } |
| |
| |
| |
| |
| static struct file_operations zf_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .write = zf_write, |
| .ioctl = zf_ioctl, |
| .open = zf_open, |
| .release = zf_close, |
| }; |
| |
| static struct miscdevice zf_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &zf_fops, |
| }; |
| |
| |
| /* |
| * The device needs to learn about soft shutdowns in order to |
| * turn the timebomb registers off. |
| */ |
| static struct notifier_block zf_notifier = { |
| .notifier_call = zf_notify_sys, |
| }; |
| |
| static void __init zf_show_action(int act) |
| { |
| char *str[] = { "RESET", "SMI", "NMI", "SCI" }; |
| |
| printk(KERN_INFO PFX ": Watchdog using action = %s\n", str[act]); |
| } |
| |
| static int __init zf_init(void) |
| { |
| int ret; |
| |
| printk(KERN_INFO PFX ": MachZ ZF-Logic Watchdog driver initializing.\n"); |
| |
| ret = zf_get_ZFL_version(); |
| printk("%#x\n", ret); |
| if((!ret) || (ret != 0xffff)){ |
| printk(KERN_WARNING PFX ": no ZF-Logic found\n"); |
| return -ENODEV; |
| } |
| |
| if((action <= 3) && (action >= 0)){ |
| zf_action = zf_action>>action; |
| } else |
| action = 0; |
| |
| zf_show_action(action); |
| |
| spin_lock_init(&zf_lock); |
| spin_lock_init(&zf_port_lock); |
| |
| ret = misc_register(&zf_miscdev); |
| if (ret){ |
| printk(KERN_ERR "can't misc_register on minor=%d\n", |
| WATCHDOG_MINOR); |
| goto out; |
| } |
| |
| if(!request_region(ZF_IOBASE, 3, "MachZ ZFL WDT")){ |
| printk(KERN_ERR "cannot reserve I/O ports at %d\n", |
| ZF_IOBASE); |
| ret = -EBUSY; |
| goto no_region; |
| } |
| |
| ret = register_reboot_notifier(&zf_notifier); |
| if(ret){ |
| printk(KERN_ERR "can't register reboot notifier (err=%d)\n", |
| ret); |
| goto no_reboot; |
| } |
| |
| zf_set_status(0); |
| zf_set_control(0); |
| |
| /* this is the timer that will do the hard work */ |
| init_timer(&zf_timer); |
| zf_timer.function = zf_ping; |
| zf_timer.data = 0; |
| |
| return 0; |
| |
| no_reboot: |
| release_region(ZF_IOBASE, 3); |
| no_region: |
| misc_deregister(&zf_miscdev); |
| out: |
| return ret; |
| } |
| |
| |
| static void __exit zf_exit(void) |
| { |
| zf_timer_off(); |
| |
| misc_deregister(&zf_miscdev); |
| unregister_reboot_notifier(&zf_notifier); |
| release_region(ZF_IOBASE, 3); |
| } |
| |
| module_init(zf_init); |
| module_exit(zf_exit); |