powerpc/85xx: add DOZE/NAP support for e500 core
The e500 core enter DOZE/NAP power-saving modes when the core go to
cpu_idle routine.
The power management default running mode is DOZE, If the user
echo 1 > /proc/sys/kernel/powersave-nap
the system will change to NAP running mode.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 2346d27..0e8f928 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -38,6 +38,7 @@
obj-$(CONFIG_IBMEBUS) += ibmebus.o
obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
+obj-$(CONFIG_E500) += idle_e500.o
obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
obj-$(CONFIG_TAU) += tau_6xx.o
obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o \
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index aa421f5..c5397c1 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1491,7 +1491,6 @@
.pvr_mask = 0xffff0000,
.pvr_value = 0x80200000,
.cpu_name = "e500",
- /* xxx - galak: add CPU_FTR_MAYBE_CAN_DOZE */
.cpu_features = CPU_FTRS_E500,
.cpu_user_features = COMMON_USER_BOOKE |
PPC_FEATURE_HAS_SPE_COMP |
@@ -1508,7 +1507,6 @@
.pvr_mask = 0xffff0000,
.pvr_value = 0x80210000,
.cpu_name = "e500v2",
- /* xxx - galak: add CPU_FTR_MAYBE_CAN_DOZE */
.cpu_features = CPU_FTRS_E500_2,
.cpu_user_features = COMMON_USER_BOOKE |
PPC_FEATURE_HAS_SPE_COMP |
@@ -1526,7 +1524,6 @@
.pvr_mask = 0xffff0000,
.pvr_value = 0x80230000,
.cpu_name = "e500mc",
- /* xxx - galak: add CPU_FTR_MAYBE_CAN_DOZE */
.cpu_features = CPU_FTRS_E500MC,
.cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
.icache_bsize = 64,
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index fe21674..ab2d62f 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -176,14 +176,14 @@
cmplw r1,r9 /* if r1 <= ksp_limit */
ble- stack_ovf /* then the kernel stack overflowed */
5:
-#ifdef CONFIG_6xx
+#if defined(CONFIG_6xx) || defined(CONFIG_E500)
rlwinm r9,r1,0,0,31-THREAD_SHIFT
tophys(r9,r9) /* check local flags */
lwz r12,TI_LOCAL_FLAGS(r9)
mtcrf 0x01,r12
bt- 31-TLF_NAPPING,4f
bt- 31-TLF_SLEEPING,7f
-#endif /* CONFIG_6xx */
+#endif /* CONFIG_6xx || CONFIG_E500 */
.globl transfer_to_handler_cont
transfer_to_handler_cont:
3:
@@ -196,10 +196,10 @@
SYNC
RFI /* jump to handler, enable MMU */
-#ifdef CONFIG_6xx
+#if defined (CONFIG_6xx) || defined(CONFIG_E500)
4: rlwinm r12,r12,0,~_TLF_NAPPING
stw r12,TI_LOCAL_FLAGS(r9)
- b power_save_6xx_restore
+ b power_save_ppc32_restore
7: rlwinm r12,r12,0,~_TLF_SLEEPING
stw r12,TI_LOCAL_FLAGS(r9)
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 7c2b653..c426850 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -39,6 +39,7 @@
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
+#include <asm/cache.h>
#include "head_booke.h"
/* As with the other PowerPC ports, it is expected that when code
@@ -1071,6 +1072,52 @@
isync /* Force context change */
blr
+_GLOBAL(flush_dcache_L1)
+ mfspr r3,SPRN_L1CFG0
+
+ rlwinm r5,r3,9,3 /* Extract cache block size */
+ twlgti r5,1 /* Only 32 and 64 byte cache blocks
+ * are currently defined.
+ */
+ li r4,32
+ subfic r6,r5,2 /* r6 = log2(1KiB / cache block size) -
+ * log2(number of ways)
+ */
+ slw r5,r4,r5 /* r5 = cache block size */
+
+ rlwinm r7,r3,0,0xff /* Extract number of KiB in the cache */
+ mulli r7,r7,13 /* An 8-way cache will require 13
+ * loads per set.
+ */
+ slw r7,r7,r6
+
+ /* save off HID0 and set DCFA */
+ mfspr r8,SPRN_HID0
+ ori r9,r8,HID0_DCFA@l
+ mtspr SPRN_HID0,r9
+ isync
+
+ lis r4,KERNELBASE@h
+ mtctr r7
+
+1: lwz r3,0(r4) /* Load... */
+ add r4,r4,r5
+ bdnz 1b
+
+ msync
+ lis r4,KERNELBASE@h
+ mtctr r7
+
+1: dcbf 0,r4 /* ...and flush. */
+ add r4,r4,r5
+ bdnz 1b
+
+ /* restore HID0 */
+ mtspr SPRN_HID0,r8
+ isync
+
+ blr
+
/*
* We put a few things here that have to be page-aligned. This stuff
* goes at the beginning of the data segment, which is page-aligned.
diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S
index 01bcd52..019b02d 100644
--- a/arch/powerpc/kernel/idle_6xx.S
+++ b/arch/powerpc/kernel/idle_6xx.S
@@ -153,7 +153,7 @@
* address of current. R11 points to the exception frame (physical
* address). We have to preserve r10.
*/
-_GLOBAL(power_save_6xx_restore)
+_GLOBAL(power_save_ppc32_restore)
lwz r9,_LINK(r11) /* interrupted in ppc6xx_idle: */
stw r9,_NIP(r11) /* make it do a blr */
diff --git a/arch/powerpc/kernel/idle_e500.S b/arch/powerpc/kernel/idle_e500.S
new file mode 100644
index 0000000..267adec
--- /dev/null
+++ b/arch/powerpc/kernel/idle_e500.S
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
+ * Dave Liu <daveliu@freescale.com>
+ * copy from idle_6xx.S and modify for e500 based processor,
+ * implement the power_save function in idle.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/threads.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+ .text
+
+_GLOBAL(e500_idle)
+ rlwinm r3,r1,0,0,31-THREAD_SHIFT /* current thread_info */
+ lwz r4,TI_LOCAL_FLAGS(r3) /* set napping bit */
+ ori r4,r4,_TLF_NAPPING /* so when we take an exception */
+ stw r4,TI_LOCAL_FLAGS(r3) /* it will return to our caller */
+
+ /* Check if we can nap or doze, put HID0 mask in r3 */
+ lis r3,0
+BEGIN_FTR_SECTION
+ lis r3,HID0_DOZE@h
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
+
+BEGIN_FTR_SECTION
+ /* Now check if user enabled NAP mode */
+ lis r4,powersave_nap@ha
+ lwz r4,powersave_nap@l(r4)
+ cmpwi 0,r4,0
+ beq 1f
+ stwu r1,-16(r1)
+ mflr r0
+ stw r0,20(r1)
+ bl flush_dcache_L1
+ lwz r0,20(r1)
+ addi r1,r1,16
+ mtlr r0
+ lis r3,HID0_NAP@h
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+1:
+ /* Go to NAP or DOZE now */
+ mfspr r4,SPRN_HID0
+ rlwinm r4,r4,0,~(HID0_DOZE|HID0_NAP|HID0_SLEEP)
+ or r4,r4,r3
+ isync
+ mtspr SPRN_HID0,r4
+ isync
+
+ mfmsr r7
+ oris r7,r7,MSR_WE@h
+ ori r7,r7,MSR_EE
+ msync
+ mtmsr r7
+ isync
+2: b 2b
+
+/*
+ * Return from NAP/DOZE mode, restore some CPU specific registers,
+ * r2 containing physical address of current.
+ * r11 points to the exception frame (physical address).
+ * We have to preserve r10.
+ */
+_GLOBAL(power_save_ppc32_restore)
+ lwz r9,_LINK(r11) /* interrupted in e500_idle */
+ stw r9,_NIP(r11) /* make it do a blr */
+
+#ifdef CONFIG_SMP
+ mfspr r12,SPRN_SPRG3
+ lwz r11,TI_CPU(r12) /* get cpu number * 4 */
+ slwi r11,r11,2
+#else
+ li r11,0
+#endif
+ b transfer_to_handler_cont
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index bef0be3..9e83add 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -127,6 +127,11 @@
ppc_md.power_save = ppc6xx_idle;
#endif
+#ifdef CONFIG_E500
+ if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
+ cpu_has_feature(CPU_FTR_CAN_NAP))
+ ppc_md.power_save = e500_idle;
+#endif
if (ppc_md.progress)
ppc_md.progress("id mach(): done", 0x200);
}
diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h
index a3dce178..18feb63 100644
--- a/include/asm-powerpc/cputable.h
+++ b/include/asm-powerpc/cputable.h
@@ -347,12 +347,13 @@
#define CPU_FTRS_E200 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
CPU_FTR_NODSISRALIGN | CPU_FTR_COHERENT_ICACHE | \
CPU_FTR_UNIFIED_ID_CACHE)
-#define CPU_FTRS_E500 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
+#define CPU_FTRS_E500 (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
+ CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_E500_2 (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
+ CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | \
CPU_FTR_NODSISRALIGN)
-#define CPU_FTRS_E500_2 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
- CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN)
-#define CPU_FTRS_E500MC (CPU_FTR_USE_TB | CPU_FTR_BIG_PHYS | \
- CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_E500MC (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
+ CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN)
#define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
/* 64-bit CPUs */
diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h
index 54ed64d..9899226 100644
--- a/include/asm-powerpc/machdep.h
+++ b/include/asm-powerpc/machdep.h
@@ -262,6 +262,7 @@
#endif
};
+extern void e500_idle(void);
extern void power4_idle(void);
extern void power4_cpu_offline_powersave(void);
extern void ppc6xx_idle(void);
diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h
index edc0cfd..079999b 100644
--- a/include/asm-powerpc/reg.h
+++ b/include/asm-powerpc/reg.h
@@ -240,7 +240,7 @@
#define HID0_DAPUEN (1<<8) /* Debug APU enable */
#define HID0_SGE (1<<7) /* Store Gathering Enable */
#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */
-#define HID0_DFCA (1<<6) /* Data Cache Flush Assist */
+#define HID0_DCFA (1<<6) /* Data Cache Flush Assist */
#define HID0_LRSTK (1<<4) /* Link register stack - 745x */
#define HID0_BTIC (1<<5) /* Branch Target Instr Cache Enable */
#define HID0_ABE (1<<3) /* Address Broadcast Enable */
diff --git a/include/asm-powerpc/reg_booke.h b/include/asm-powerpc/reg_booke.h
index a1ab2ba..a5e8903 100644
--- a/include/asm-powerpc/reg_booke.h
+++ b/include/asm-powerpc/reg_booke.h
@@ -61,6 +61,8 @@
#define SPRN_SPEFSCR 0x200 /* SPE & Embedded FP Status & Control */
#define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */
#define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */
+#define SPRN_L1CFG0 0x203 /* L1 Cache Configure Register 0 */
+#define SPRN_L1CFG1 0x204 /* L1 Cache Configure Register 1 */
#define SPRN_ATB 0x20E /* Alternate Time Base */
#define SPRN_ATBL 0x20E /* Alternate Time Base Lower */
#define SPRN_ATBU 0x20F /* Alternate Time Base Upper */