Merge "ASoC: msm8x10: Update the codec name for msm8x10 platform"
diff --git a/Documentation/devicetree/bindings/arm/msm/memory-reserve.txt b/Documentation/devicetree/bindings/arm/msm/memory-reserve.txt
index 6dac1b7..bf5e544 100644
--- a/Documentation/devicetree/bindings/arm/msm/memory-reserve.txt
+++ b/Documentation/devicetree/bindings/arm/msm/memory-reserve.txt
@@ -26,12 +26,13 @@
add the appropriate binding:
Required parameters:
-- qcom,memblock-remove: base and size of block to be removed
+- qcom,memblock-remove: array of the base and size of blocks to be removed
qcom,a-driver {
compatible = "qcom,a-driver";
- /* Remove 4MB at 0x200000*/
- qcom,memblock-remove = <0x200000 0x400000>;
+ /* Remove 4MB at 0x200000 and 2MB at 0x800000*/
+ qcom,memblock-remove = <0x200000 0x400000
+ 0x800000 0x200000>;
};
In order to ensure memory is only reserved when a driver is actually enabled,
diff --git a/Documentation/devicetree/bindings/fb/mdss-dsi-ctrl.txt b/Documentation/devicetree/bindings/fb/mdss-dsi-ctrl.txt
index ce4972a..4cec0cd 100644
--- a/Documentation/devicetree/bindings/fb/mdss-dsi-ctrl.txt
+++ b/Documentation/devicetree/bindings/fb/mdss-dsi-ctrl.txt
@@ -12,21 +12,41 @@
- vdda-supply: Phandle for vreg regulator device node.
- qcom,mdss-fb-map: pHandle that specifies the framebuffer to which the
interface is mapped.
+- qcom,platform-regulator-settings: An array of length 7 that specifies the PHY
+ regulator settings.
+- qcom,platform-strength-ctrl: An array of length 2 that specifies the PHY
+ strengthCtrl settings.
+- qcom,platform-bist-ctrl: An array of length 6 that specifies the PHY
+ BIST ctrl settings.
+- qcom,platform-lane-config: An array of length 45 that specifies the PHY
+ lane configuration settings.
Optional properties:
- label: A string used to describe the controller used.
-- qcom,supply-names: A list of strings that lists the names of the
- regulator supplies.
-- qcom,supply-min-voltage-level: A list that specifies minimum voltage level
- of supply(ies) mentioned above. This list maps
- in the order of the supply names listed above.
-- qcom,supply-max-voltage-level: A list that specifies maximum voltage level of
- supply(ies) mentioned above. This list maps in
- the order of the supply names listed above.
-- qcom,supply-peak-current: A list that specifies the peak current that will
- be drawn from the supply(ies) mentioned above. This
- list maps in the order of the supply names listed above.
+- qcom,platform-supply-entry<1..n>: A node that lists the elements of the supply. There
+ can be more than one instance of this binding,
+ in which case the entry would be appended with
+ the supply entry index.
+ e.g. qcom,platform-supply-entry1
+ -- qcom,supply-name: name of the supply (vdd/vdda/vddio)
+ -- qcom,supply-min-voltage: minimum voltage level (uV)
+ -- qcom,supply-max-voltage: maximum voltage level (uV)
+ -- qcom,supply-enable-load: load drawn (uA) from enabled supply
+ -- qcom,supply-disable-load: load drawn (uA) from disabled supply
+ -- qcom,supply-pre-on-sleep: time to sleep (ms) before turning on
+ -- qcom,supply-post-on-sleep: time to sleep (ms) after turning on
+ -- qcom,supply-pre-off-sleep: time to sleep (ms) before turning off
+ -- qcom,supply-post-off-sleep: time to sleep (ms) after turning off
+- qcom,platform-enable-gpio: Specifies the panel lcd/display enable gpio.
+- qcom,platform-reset-gpio: Specifies the panel reset gpio.
+- qcom,platform-te-gpio: Specifies the gpio used for TE.
+- qcom,platform-reset-sequence: An array that lists the
+ sequence of reset gpio values and sleeps
+ Each command will have the format defined
+ as below:
+ --> Reset GPIO value
+ --> Sleep value (in ms)
Example:
mdss_dsi0: qcom,mdss_dsi@fd922800 {
@@ -37,9 +57,50 @@
vdd-supply = <&pm8226_l15>;
vddio-supply = <&pm8226_l8>;
vdda-supply = <&pm8226_l4>;
- qcom,supply-names = "vdd", "vddio", "vdda";
- qcom,supply-min-voltage-level = <2800000 1800000 1200000>;
- qcom,supply-max-voltage-level = <2800000 1800000 1200000>;
- qcom,supply-peak-current = <150000 100000 100000>;
+ qcom,platform-strength-ctrl = [ff 06];
+ qcom,platform-bist-ctrl = [00 00 b1 ff 00 00];
+ qcom,platform-regulator-settings = [07 09 03 00 20 00 01];
+ qcom,platform-lane-config = [00 00 00 00 00 00 00 01 97
+ 00 00 00 00 05 00 00 01 97
+ 00 00 00 00 0a 00 00 01 97
+ 00 00 00 00 0f 00 00 01 97
+ 00 c0 00 00 00 00 00 01 bb];
qcom,mdss-fb-map = <&mdss_fb0>;
+ qcom,platform-reset-gpio = <&msmgpio 25 1>;
+ qcom,platform-te-gpio = <&msmgpio 24 0>;
+ qcom,platform-enable-gpio = <&msmgpio 58 1>;
+ qcom,platform-reset-sequence = <1 25 0 20 1 10>;
+ qcom,platform-supply-entry1 {
+ qcom,supply-name = "vdd";
+ qcom,supply-min-voltage = <2800000>;
+ qcom,supply-max-voltage = <2800000>;
+ qcom,supply-enable-load = <100000>;
+ qcom,supply-disable-load = <100>;
+ qcom,supply-pre-on-sleep = <0>;
+ qcom,supply-post-on-sleep = <20>;
+ qcom,supply-pre-off-sleep = <0>;
+ qcom,supply-post-off-sleep = <20>;
+ };
+ qcom,platform-supply-entry2 {
+ qcom,supply-name = "vddio";
+ qcom,supply-min-voltage = <1800000>;
+ qcom,supply-max-voltage = <1800000>;
+ qcom,supply-enable-load = <100000>;
+ qcom,supply-disable-load = <100>;
+ qcom,supply-pre-on-sleep = <0>;
+ qcom,supply-post-on-sleep = <30>;
+ qcom,supply-pre-off-sleep = <0>;
+ qcom,supply-post-off-sleep = <30>;
+ };
+ qcom,platform-supply-entry3 {
+ qcom,supply-name = "vdda";
+ qcom,supply-min-voltage = <1200000>;
+ qcom,supply-max-voltage = <1200000>;
+ qcom,supply-enable-load = <100000>;
+ qcom,supply-disable-load = <100>;
+ qcom,supply-pre-on-sleep = <0>;
+ qcom,supply-post-on-sleep = <20>;
+ qcom,supply-pre-off-sleep = <0>;
+ qcom,supply-post-off-sleep = <30>;
+ };
};
diff --git a/Documentation/devicetree/bindings/fb/mdss-dsi-panel.txt b/Documentation/devicetree/bindings/fb/mdss-dsi-panel.txt
index 8c87eac..44134f8 100644
--- a/Documentation/devicetree/bindings/fb/mdss-dsi-panel.txt
+++ b/Documentation/devicetree/bindings/fb/mdss-dsi-panel.txt
@@ -12,140 +12,173 @@
the panel driver. By default this property will be
set to "disable". Will be set to "ok/okay" status
for specific platforms.
-- qcom,dsi-ctrl-phandle: Specifies the phandle for the DSI controller that
+- qcom,mdss-dsi-panel-controller: Specifies the phandle for the DSI controller that
this panel will be mapped to.
-- qcom,mdss-pan-res: A two dimensional array that specifies the panel
- resolution.
-- qcom,mdss-pan-bpp: Specifies the panel bits per pixel. Default value is 24(rgb888).
- 18 = for rgb666
+- qcom,mdss-dsi-panel-width: Specifies panel width in pixels.
+- qcom,mdss-dsi-panel-height: Specifies panel height in pixels.
+- qcom,mdss-dsi-bpp: Specifies the panel bits per pixel.
+ 3 = for rgb111
+ 8 = for rgb332
+ 12 = for rgb444
16 = for rgb565
-- qcom,mdss-pan-dest: A string that specifies the destination display for the panel.
- Default is "display_1".
+ 18 = for rgb666
+ 24 = for rgb888
+- qcom,mdss-dsi-panel-destination: A string that specifies the destination display for the panel.
"display_1" = DISPLAY_1
"display_2" = DISPLAY_2
-- qcom,panel-phy-regulatorSettings: An array of length 7 that specifies the PHY
- regulator settings for the panel.
-- qcom,panel-phy-timingSettings: An array of length 12 that specifies the PHY
+- qcom,mdss-dsi-panel-timings: An array of length 12 that specifies the PHY
timing settings for the panel.
-- qcom,panel-phy-strengthCtrl: An array of length 2 that specifies the PHY
- strengthCtrl settings for the panel.
-- qcom,panel-phy-bistCtrl: An array of length 6 that specifies the PHY
- BIST ctrl settings for the panel.
-- qcom,panel-phy-laneConfig: An array of length 45 that specifies the PHY
- lane configuration settings for the panel.
-- qcom,mdss-panel-on-cmds: An array of variable length that lists the init commands
- of the panel. Each command will have the format specified
- as below:
- --> data type of the command
- --> specifies whether this command packet is last.
- --> virtual channel
- --> Needs acknowledge from the panel or not.
- --> wait time after the command is transmitter.
- --> size of payload
- --> payload.
-- qcom,mdss-panel-off-cmds: An array of variable length that lists the panel off
- commands. Each command will have the format specified
- as below:
- --> data type of the command
- --> specifies whether this command packet is last.
- --> virtual channel
- --> Needs acknowledge from the panel or not.
- --> wait time after the command is transmitter.
- --> size of payload
- --> payload.
+- qcom,mdss-dsi-on-command: A byte stream formed by multiple dcs packets base on
+ qcom dsi controller protocol.
+ byte 0: dcs data type
+ byte 1: set to indicate this is an individual packet
+ (no chain)
+ byte 2: virtual channel number
+ byte 3: expect ack from client (dcs read command)
+ byte 4: wait number of specified ms after dcs command
+ transmitted
+ byte 5, 6: 16 bits length in network byte order
+ byte 7 and beyond: number byte of payload
+- qcom,mdss-dsi-off-command: A byte stream formed by multiple dcs packets base on
+ qcom dsi controller protocol.
+ byte 0: dcs data type
+ byte 1: set to indicate this is an individual packet
+ (no chain)
+ byte 2: virtual channel number
+ byte 3: expect ack from client (dcs read command)
+ byte 4: wait number of specified ms after dcs command
+ transmitted
+ byte 5, 6: 16 bits length in network byte order
+ byte 7 and beyond: number byte of payload
Optional properties:
-- label: A string used as a descriptive name of the panel
-- qcom,enable-gpio: Specifies the panel lcd/display enable gpio.
-- qcom,rst-gpio: Specifies the panel reset gpio.
-- qcom,te-gpio: Specifies the gpio used for TE.
-- qcom,pwm-lpg-channel: LPG channel for backlight.
-- qcom,pwm-period: PWM period in microseconds.
-- qcom,pwm-pmic-gpio: PMIC gpio binding to backlight.
-- qcom,mdss-pan-broadcast-mode: Boolean used to enable broadcast mode.
+- qcom,mdss-dsi-panel-name: A string used as a descriptive name of the panel
- qcom,cont-splash-enabled: Boolean used to enable continuous splash mode.
-- qcom,fbc-enabled: Boolean used to enable frame buffer compression mode.
-- qcom,fbc-mode-select: An array of length 7 that specifies the fbc mode supported
- by the panel. FBC enabled panels may or may not support
- the modes specified here. Each entry will
- have the format specified below:
- --> compressed bpp supported by the panel
- --> component packing
- --> enable/disable quantization error calculation
- --> Bias for CD
- --> enable/disable PAT mode
- --> enable/disable VLC mode
- --> enable/disable BFLC mode
-- qcom,fbc-budget-ctl: An array of length 3 that specifies the budget control settings
- supported by the fbc enabled panel. Each entry will have the format
- specified below:
- --> per line extra budget
- --> extra budget level
- --> per block budget
-- qcom,fbc-lossy-mode: An array of 3 that specifies the lossy mode settings
- supported by the fbc enabled panel. Each entry will
- have the format specified below:
- --> lossless mode threshold
- --> lossy mode threshold
- --> lossy RGB threshold
-- qcom,mdss-pan-porch-values: An array of size 6 that specifies the panel blanking values.
-- qcom,mdss-pan-underflow-clr: Specifies the controller settings for the panel underflow clear
- settings. Default value is 0xff.
-- qcom,mdss-pan-bl-ctrl: A string that specifies the implementation of backlight
+- qcom,mdss-dsi-panel-broadcast-mode: Boolean used to enable broadcast mode.
+- qcom,mdss-dsi-fbc-enable: Boolean used to enable frame buffer compression mode.
+- qcom,mdss-dsi-fbc-bpp: Compressed bpp supported by the panel.
+ Specified color order is used as default value.
+- qcom,mdss-dsi-fbc-packing: Component packing.
+ 0 = default value.
+- qcom,mdss-dsi-fbc-quant-error: Boolean used to enable quantization error calculation.
+- qcom,mdss-dsi-fbc-bias: Bias for CD.
+ 0 = default value.
+- qcom,mdss-dsi-fbc-pat-mode: Boolean used to enable PAT mode.
+- qcom,mdss-dsi-fbc-vlc-mode: Boolean used to enable VLC mode.
+- qcom,mdss-dsi-fbc-bflc-mode: Boolean used to enable BFLC mode.
+- qcom,mdss-dsi-fbc-h-line-budget: Per line extra budget.
+ 0 = default value.
+- qcom,mdss-dsi-fbc-budget-ctrl: Extra budget level.
+ 0 = default value.
+- qcom,mdss-dsi-fbc-block-budget: Per block budget.
+ 0 = default value.
+- qcom,mdss-dsi-fbc-lossless-threshold: Lossless mode threshold.
+ 0 = default value.
+- qcom,mdss-dsi-fbc-lossy-threshold: Lossy mode threshold.
+ 0 = default value.
+- qcom,mdss-dsi-fbc-rgb-threshold: Lossy RGB threshold.
+ 0 = default value.
+- qcom,mdss-dsi-fbc-lossy-mode-idx: Lossy mode index value.
+ 0 = default value.
+- qcom,mdss-dsi-h-back-porch: Horizontal back porch value in pixel.
+ 6 = default value.
+- qcom,mdss-dsi-h-front-porch: Horizontal front porch value in pixel.
+ 6 = default value.
+- qcom,mdss-dsi-h-pulse-width: Horizontal pulse width.
+ 2 = default value.
+- qcom,mdss-dsi-h-sync-skew: Horizontal sync skew value.
+ 0 = default value.
+- qcom,mdss-dsi-v-back-porch: Vertical back porch value in pixel.
+ 6 = default value.
+- qcom,mdss-dsi-v-front-porch: Vertical front porch value in pixel.
+ 6 = default value.
+- qcom,mdss-dsi-v-pulse-width: Vertical pulse width.
+ 2 = default value.
+- qcom,mdss-dsi-h-left-border: Horizontal left border in pixel.
+ 0 = default value
+- qcom,mdss-dsi-h-right-border: Horizontal right border in pixel.
+ 0 = default value
+- qcom,mdss-dsi-v-top-border: Vertical top border in pixel.
+ 0 = default value
+- qcom,mdss-dsi-v-bottom-border: Vertical bottom border in pixel.
+ 0 = default value
+- qcom,mdss-dsi-underflow-color: Specifies the controller settings for the
+ panel under flow color.
+ 0xff = default value.
+- qcom,mdss-dsi-border-color: Defines the border color value if border is present.
+ 0 = default value.
+- qcom,mdss-dsi-bl-pmic-control-type: A string that specifies the implementation of backlight
control for this panel.
"bl_ctrl_pwm" = Backlight controlled by PWM gpio.
"bl_ctrl_wled" = Backlight controlled by WLED.
- "bl_ctrl_dcs_cmds" = Backlight controlled by DCS commands.
-- qcom,mdss-pan-bl-levels: Specifies the backlight levels supported by the panel.
- Default range is 1 to 255.
-
-- qcom,mdss-pan-dsi-mode: Specifies the panel operating mode.
- 0 = enable video mode(default mode).
- 1 = enable command mode.
-- qcom,mdss-vsync-enable: Specifies Tear Check configuration.
- 0 = TE disable.
- 1 = TE enable.
-- qcom,mdss-hw-vsync-mode: Specifies TE type.
- 0 = software vsync.
- 1 = hardware vsync (TE gpio pin).
-- qcom,mdss-pan-te-sel: Specifies TE operating mode.
+ "bl_ctrl_dcs" = Backlight controlled by DCS commands.
+ other: Unknown backlight control. (default)
+- qcom,mdss-dsi-bl-pmic-bank-select: LPG channel for backlight.
+ Requred if blpmiccontroltype is PWM
+- qcom,mdss-dsi-bl-pmic-pwm-frequency: PWM period in microseconds.
+ Requred if blpmiccontroltype is PWM
+- qcom,mdss-dsi-pwm-gpio: PMIC gpio binding to backlight.
+ Requred if blpmiccontroltype is PWM
+- qcom,mdss-dsi-bl-min-level: Specifies the min backlight level supported by the panel.
+ 0 = default value.
+- qcom,mdss-dsi-bl-max-level: Specifies the max backlight level supported by the panel.
+ 255 = default value.
+- qcom,mdss-dsi-interleave-mode: Specifies interleave mode.
+ 0 = default value.
+- qcom,mdss-dsi-panel-type: Specifies the panel operating mode.
+ "dsi_video_mode" = enable video mode (default).
+ "dsi_cmd_mode" = enable command mode.
+- qcom,mdss-dsi-te-check-enable: Boolean to enable Tear Check configuration.
+- qcom,mdss-dsi-te-using-te-pin: Boolean to specify whether using hardware vsync.
+- qcom,mdss-dsi-te-pin-select: Specifies TE operating mode.
0 = TE through embedded dcs command
- 1 = TE through TE gpio pin.
-- qcom,mdss-pan-dsi-h-pulse-mode: Specifies the pulse mode option for the panel.
+ 1 = TE through TE gpio pin. (default)
+- qcom,mdss-dsi-te-dcs-command: Inserts the dcs command.
+ 1 = default value.
+- qcom,mdss-dsi-te-v-sync-rd-ptr-irq-line: Configures the scan line number that the dsi
+ pixel transfer will start on. Rasing this number
+ will result in delaying the start of the pixel
+ transfer.
+ 0x2c = default value.
+- qcom,mdss-dsi-te-v-sync-continue-lines: Represents the difference in number of lines
+ between estimated read pointer and write pointer
+ to allow the updating of all the lines except
+ the first line of the frame.
+ 0x3c = default value.
+- qcom,mdss-dsi-h-sync-pulse: Specifies the pulse mode option for the panel.
0 = Don't send hsa/he following vs/ve packet(default)
1 = Send hsa/he following vs/ve packet
-- qcom,mdss-pan-dsi-h-power-stop: An Array of size 3 that specifies the power mode
- during horizontal porch and sync periods of the panel.
- 0 = high speed mode(default mode).
- 1 = Low power mode for horizontal porches and sync pulse.
-- qcom,mdss-pan-dsi-bllp-power-stop: An Array of size 2 that specifies the power mode
- during blanking period and after EOF(end of frame).
- 0 = high speed mode(default mode).
- 1 = Low power mode during blanking and EOF.
-- qcom,mdss-pan-dsi-traffic-mode: Specifies the panel traffic mode.
+- qcom,mdss-dsi-hfp-power-mode: Boolean to determine DSI lane state during
+ horizontal front porch (HFP) blanking period.
+- qcom,mdss-dsi-hbp-power-mode: Boolean to determine DSI lane state during
+ horizontal back porch (HBP) blanking period.
+- qcom,mdss-dsi-hsa-power-mode: Boolean to determine DSI lane state during
+ horizontal sync active (HSA) mode.
+- qcom,mdss-dsi-bllp-eof-power-mode: Boolean to determine DSI lane state during
+ blanking low power period (BLLP) EOF mode.
+- qcom,mdss-dsi-bllp-power-mode: Boolean to determine DSI lane state during
+ blanking low power period (BLLP) mode.
+- qcom,mdss-dsi-traffic-mode: Specifies the panel traffic mode.
0 = non burst with sync pulses (default mode).
1 = non burst with sync start event.
2 = burst mode.
-- qcom,mdss-pan-dsi-dst-format: Specifies the destination format.
- 0 = DSI_VIDEO_DST_FORMAT_RGB565.
- 1 = DSI_VIDEO_DST_FORMAT_RGB666.
- 2 = DSI_VIDEO_DST_FORMAT_RGB666_LOOSE.
- 3 = DSI_VIDEO_DST_FORMAT_RGB888 (Default format)
- 6 = DSI_CMD_DST_FORMAT_RGB565
- 7 = DSI_CMD_DST_FORMAT_RGB666
- 8 = DSI_CMD_DST_FORMAT_RGB888
-- qcom,mdss-pan-dsi-vc: Specifies the virtual channel identefier.
+- qcom,mdss-dsi-pixel-packing: Specifies if pixel packing is used (in case of RGB666).
+ 0 = Tight packing (default value).
+ 1 = Loose packing.
+- qcom,mdss-dsi-virtual-channel-id: Specifies the virtual channel identefier.
0 = default value.
-- qcom,mdss-pan-dsi-rgb-swap: Specifies the R, G and B channel ordering.
+- qcom,mdss-dsi-color-order: Specifies the R, G and B channel ordering.
0 = DSI_RGB_SWAP_RGB (default value)
1 = DSI_RGB_SWAP_RBG
2 = DSI_RGB_SWAP_BGR
3 = DSI_RGB_SWAP_BRG
4 = DSI_RGB_SWAP_GRB
5 = DSI_RGB_SWAP_GBR
-- qcom,mdss-pan-dsi-data-lanes: An array that specifies the data lanes enabled.
- <1 1 0 0> = data lanes 1 and 2 are enabled.(default).
-- qcom,mdss-pan-dsi-dlane-swap: Specifies the data lane swap configuration.
+- qcom,mdss-dsi-lane-0-state: Boolean that specifies whether data lane 0 is enabled.
+- qcom,mdss-dsi-lane-1-state: Boolean that specifies whether data lane 1 is enabled.
+- qcom,mdss-dsi-lane-2-state: Boolean that specifies whether data lane 2 is enabled.
+- qcom,mdss-dsi-lane-3-state: Boolean that specifies whether data lane 3 is enabled.
+- qcom,mdss-dsi-lane-map: Specifies the data lane swap configuration.
0 = <0 1 2 3> (default value)
1 = <3 0 1 2>
2 = <2 3 0 1>
@@ -154,79 +187,121 @@
5 = <1 0 3 2>
6 = <2 1 0 3>
7 = <3 2 1 0>
-- qcom,mdss-pan-dsi-t-clk: An array that specifies the byte clock cycles
- before and after each mode switch.
-- qcom,mdss-pan-dsi-stream: Specifies the packet stream to be used.
+- qcom,mdss-dsi-t-clk-post: Specifies the byte clock cycles after mode switch.
+ 0x03 = default value.
+- qcom,mdss-dsi-t-clk-pre: Specifies the byte clock cycles before mode switch.
+ 0x24 = default value.
+- qcom,mdss-dsi-stream: Specifies the packet stream to be used.
0 = stream 0 (default)
1 = stream 1
-- qcom,mdss-pan-dsi-mdp-tr: Specifies the trigger mechanism to be used for MDP path.
+- qcom,mdss-dsi-mdp-trigger: Specifies the trigger mechanism to be used for MDP path.
0 = no trigger
2 = Tear check signal line used for trigger
- 4 = Triggered by software (default mode)
+ 4 = Triggered by software (default)
6 = Software trigger and TE
-- qcom,mdss-pan-dsi-dma-tr: Specifies the trigger mechanism to be used for DMA path.
+- qcom,mdss-dsi-dma-trigger: Specifies the trigger mechanism to be used for DMA path.
0 = no trigger
2 = Tear check signal line used for trigger
- 4 = Triggered by software (default mode)
+ 4 = Triggered by software (default)
5 = Software trigger and start/end of frame trigger.
6 = Software trigger and TE
-- qcom,mdss-pan-dsi-frame-rate: Specifies the frame rate for the panel.
+- qcom,mdss-dsi-panel-framerate: Specifies the frame rate for the panel.
60 = 60 frames per second (default)
-- qcom,on-cmds-dsi-state: A string that Specifies the ctrl state for sending ON commands.
- Supported modes are "DSI_LP_MODE" and "DSI_HS_MODE".
-- qcom,off-cmds-dsi-state: A string that Specifies the ctrl state for sending ON commands.
- Supported modes are "DSI_LP_MODE" and "DSI_HS_MODE".
+- qcom,mdss-dsi-panel-clockrate: Specifies the panel clock speed in Hz.
+ 0 = default value.
+- qcom,mdss-dsi-on-command-state: String that specifies the ctrl state for sending ON commands.
+ "dsi_lp_mode" = DSI low power mode (default)
+ "dsi_hs_mode" = DSI high speed mode
+- qcom,mdss-dsi-off-command-state: String that specifies the ctrl state for sending OFF commands.
+ "dsi_lp_mode" = DSI low power mode (default)
+ "dsi_hs_mode" = DSI high speed mode
-- qcom,panel-on-cmds: A byte stream formed by multiple dcs packets base on
- qcom dsi controller protocol.
- byte 0 : dcs data type
- byte 1 : set to indicate this is an individual packet
- (no chain).
- byte 2 : virtual channel number
- byte 3 : expect ack from client (dcs read command)
- byte 4 : wait number of specified ms after dcs command
- transmitted
- byte 5, 6: 16 bits length in network byte order
- byte 7 and beyond: number byte of payload
-
Note, if a given optional qcom,* binding is not present, then the driver will configure
the default values specified.
Example:
-/ {
+&soc {
qcom,mdss_dsi_sim_video {
compatible = "qcom,mdss-dsi-panel";
- label = "simulator video mode dsi panel";
+ qcom,mdss-dsi-panel-name = "simulator video mode dsi panel";
status = "disable";
- qcom,dsi-ctrl-phandle = <&mdss_dsi0>;
- qcom,mdss-pan-res = <640 480>;
- qcom,mdss-pan-bpp = <24>;
- qcom,mdss-pan-dest = "display_1";
- qcom,mdss-pan-porch-values = <6 2 6 6 2 6>;
- qcom,mdss-pan-underflow-clr = <0xff>;
- qcom,mdss-pan-bl-levels = <1 15>;
- qcom,mdss-pan-dsi-mode = <0>;
- qcom,mdss-pan-dsi-h-pulse-mode = <1>;
- qcom,mdss-pan-dsi-h-power-stop = <1 1 1>;
- qcom,mdss-pan-dsi-bllp-power-stop = <1 1>;
- qcom,mdss-pan-dsi-traffic-mode = <0>;
- qcom,mdss-pan-dsi-dst-format = <3>;
- qcom,mdss-pan-dsi-vc = <0>;
- qcom,mdss-pan-dsi-rgb-swap = <0>;
- qcom,mdss-pan-dsi-data-lanes = <1 1 0 0>;
- qcom,mdss-pan-dsi-t-clk = <0x24 0x03>;
- qcom,mdss-pan-dsi-stream = <0>;
- qcom,mdss-pan-dsi-mdp-tr = <0x04>;
- qcom,mdss-pan-dsi-dma-tr = <0x04>;
- qcom,mdss-pan-frame-rate = <60>;
- qcom,panel-on-cmds = [32 01 00 00 00 00 02 00 00];
- qcom,on-cmds-dsi-state = "DSI_LP_MODE";
- qcom,panel-off-cmds = [22 01 00 00 00 00 00];
- qcom,off-cmds-dsi-state = "DSI LP MODE";
- qcom,fbc-enabled;
- qcom,fbc-mode = <12 0 1 2 1 1 1>;
- qcom,fbc-budget-ctl = <675 5 91>;
- qcom,fbc-lossy-mode = <0 0xc0 0 3>;
+ qcom,mdss-dsi-panel-controller = <&mdss_dsi0>;
+ qcom,mdss-dsi-panel-height = <1280>;
+ qcom,mdss-dsi-panel-width = <720>;
+ qcom,mdss-dsi-bpp = <24>;
+ qcom,mdss-dsi-pixel-packing = <0>;
+ qcom,mdss-dsi-panel-destination = "display_1";
+ qcom,mdss-dsi-panel-broadcast-mode;
+ qcom,mdss-dsi-fbc-enable;
+ qcom,mdss-dsi-fbc-bpp = <0>;
+ qcom,mdss-dsi-fbc-packing = <0>;
+ qcom,mdss-dsi-fbc-quant-error;
+ qcom,mdss-dsi-fbc-bias = <0>;
+ qcom,mdss-dsi-fbc-pat-mode;
+ qcom,mdss-dsi-fbc-vlc-mode;
+ qcom,mdss-dsi-fbc-bflc-mode;
+ qcom,mdss-dsi-fbc-h-line-budget = <0>;
+ qcom,mdss-dsi-fbc-budget-ctrl = <0>;
+ qcom,mdss-dsi-fbc-block-budget = <0>;
+ qcom,mdss-dsi-fbc-lossless-threshold = <0>;
+ qcom,mdss-dsi-fbc-lossy-threshold = <0>;
+ qcom,mdss-dsi-fbc-rgb-threshold = <0>;
+ qcom,mdss-dsi-fbc-lossy-mode-idx = <0>;
+ qcom,mdss-dsi-h-front-porch = <140>;
+ qcom,mdss-dsi-h-back-porch = <164>;
+ qcom,mdss-dsi-h-pulse-width = <8>;
+ qcom,mdss-dsi-h-sync-skew = <0>;
+ qcom,mdss-dsi-v-back-porch = <6>;
+ qcom,mdss-dsi-v-front-porch = <1>;
+ qcom,mdss-dsi-v-pulse-width = <1>;
+ qcom,mdss-dsi-h-left-border = <0>;
+ qcom,mdss-dsi-h-right-border = <0>;
+ qcom,mdss-dsi-v-top-border = <0>;
+ qcom,mdss-dsi-v-bottom-border = <0>;
+ qcom,mdss-dsi-border-color = <0>;
+ qcom,mdss-dsi-underflow-color = <0xff>;
+ qcom,mdss-dsi-bl-min-level = <1>;
+ qcom,mdss-dsi-bl-max-level = < 15>;
+ qcom,mdss-dsi-interleave-mode = <0>;
+ qcom,mdss-dsi-panel-type = "dsi_video_mode";
+ qcom,mdss-dsi-te-check-enable;
+ qcom,mdss-dsi-te-using-te-pin;
+ qcom,mdss-dsi-te-dcs-command = <1>;
+ qcom,mdss-dsi-te-v-sync-continue-lines = <0x3c>;
+ qcom,mdss-dsi-te-v-sync-rd-ptr-irq-line = <0x2c>;
+ qcom,mdss-dsi-te-pin-select = <1>;
+ qcom,mdss-dsi-h-sync-pulse = <1>;
+ qcom,mdss-dsi-hfp-power-mode;
+ qcom,mdss-dsi-hbp-power-mode;
+ qcom,mdss-dsi-hsa-power-mode;
+ qcom,mdss-dsi-bllp-eof-power-mode;
+ qcom,mdss-dsi-bllp-power-mode;
+ qcom,mdss-dsi-traffic-mode = <0>;
+ qcom,mdss-dsi-virtual-channel-id = <0>;
+ qcom,mdss-dsi-color-order = <0>;
+ qcom,mdss-dsi-lane-0-state;
+ qcom,mdss-dsi-lane-1-state;
+ qcom,mdss-dsi-lane-2-state;
+ qcom,mdss-dsi-lane-3-state;
+ qcom,mdss-dsi-lane-map = <0>;
+ qcom,mdss-dsi-t-clk-post = <0x20>;
+ qcom,mdss-dsi-t-clk-pre = <0x2c>;
+ qcom,mdss-dsi-stream = <0>;
+ qcom,mdss-dsi-mdp-trigger = <0>;
+ qcom,mdss-dsi-dma-trigger = <0>;
+ qcom,mdss-dsi-panel-framerate = <60>;
+ qcom,mdss-dsi-panel-clockrate = <424000000>;
+ qcom,mdss-dsi-panel-timings = [7d 25 1d 00 37 33
+ 22 27 1e 03 04 00];
+ qcom,mdss-dsi-on-command = [32 01 00 00 00 00 02 00 00
+ 29 01 00 00 10 00 02 FF 99];
+ qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
+ qcom,mdss-dsi-off-command = [22 01 00 00 00 00 00];
+ qcom,mdss-dsi-off-command-state = "dsi_hs_mode";
+ qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
+ qcom,mdss-dsi-bl-pmic-bank-select = <0>;
+ qcom,mdss-dsi-bl-pmic-pwm-frequency = <0>;
+ qcom,mdss-dsi-pwm-gpio = <&pm8941_mpps 5 0>;
};
};
diff --git a/Documentation/devicetree/bindings/pil/pil-pronto.txt b/Documentation/devicetree/bindings/pil/pil-pronto.txt
index de54b24..2cbf22c 100644
--- a/Documentation/devicetree/bindings/pil/pil-pronto.txt
+++ b/Documentation/devicetree/bindings/pil/pil-pronto.txt
@@ -13,12 +13,12 @@
- interrupts: WCNSS to Apps watchdog bite interrupt
- vdd_pronto_pll-supply: regulator to supply pronto pll.
- qcom,firmware-name: Base name of the firmware image. Ex. "wcnss"
-- qcom,gpio-proxy-unvote: GPIO used by the wcnss to trigger proxy unvoting in
- the Apps
Optional properties:
- qcom,gpio-err-fatal: GPIO used by the wcnss to indicate error fatal to the Apps.
- qcom,gpio-err-ready: GPIO used by the wcnss to indicate error ready to the Apps.
+- qcom,gpio-proxy-unvote: GPIO used by the wcnss to trigger proxy unvoting in
+ the Apps
- qcom,gpio-force-stop: GPIO used by the Apps to force the wcnss to shutdown.
Example:
diff --git a/Documentation/devicetree/bindings/pil/pil-q6v5-lpass.txt b/Documentation/devicetree/bindings/pil/pil-q6v5-lpass.txt
index f421d1b..d32279d 100644
--- a/Documentation/devicetree/bindings/pil/pil-q6v5-lpass.txt
+++ b/Documentation/devicetree/bindings/pil/pil-q6v5-lpass.txt
@@ -14,13 +14,13 @@
- interrupts: The lpass watchdog interrupt
- vdd_cx-supply: Reference to the regulator that supplies the vdd_cx domain.
- qcom,firmware-name: Base name of the firmware image. Ex. "lpass"
-- qcom,gpio-proxy-unvote: GPIO used by the lpass to indicate apps clock is ready.
Optional properties:
- vdd_pll-supply: Reference to the regulator that supplies the PLL's rail.
- qcom,vdd_pll: Voltage to be set for the PLL's rail.
- qcom,gpio-err-fatal: GPIO used by the lpass to indicate error fatal to the apps.
- qcom,gpio-err-ready: GPIO used by the lpass to indicate apps error service is ready.
+- qcom,gpio-proxy-unvote: GPIO used by the lpass to indicate apps clock is ready.
- qcom,gpio-force-stop: GPIO used by the apps to force the lpass to shutdown.
Example:
diff --git a/Documentation/devicetree/bindings/pil/pil-q6v5-mss.txt b/Documentation/devicetree/bindings/pil/pil-q6v5-mss.txt
index 596e590..0a3789a 100644
--- a/Documentation/devicetree/bindings/pil/pil-q6v5-mss.txt
+++ b/Documentation/devicetree/bindings/pil/pil-q6v5-mss.txt
@@ -15,8 +15,6 @@
- vdd_cx-supply: Reference to the regulator that supplies the vdd_cx domain.
- vdd_mx-supply: Reference to the regulator that supplies the memory rail.
- qcom,firmware-name: Base name of the firmware image. Ex. "mdsp"
-- qcom,gpio-proxy-unvote: GPIO used by the modem to trigger proxy unvoting in
- the apps.
Optional properties:
- vdd_mss-supply: Reference to the regulator that supplies the processor.
@@ -32,6 +30,8 @@
- qcom,pil-self-auth: Boolean- True if authentication is required.
- qcom,gpio-err-fatal: GPIO used by the modem to indicate error fatal to the apps.
- qcom,gpio-err-ready: GPIO used by the modem to indicate error ready to the apps.
+- qcom,gpio-proxy-unvote: GPIO used by the modem to trigger proxy unvoting in
+ the apps.
- qcom,gpio-force-stop: GPIO used by the apps to force the modem to shutdown.
- qcom,gpio-stop-ack: GPIO used by the modem to ack force stop or a graceful stop
to the apps.
diff --git a/arch/arm/boot/dts/apq8084-mdss.dtsi b/arch/arm/boot/dts/apq8084-mdss.dtsi
index 07dffe1..5c5cd1b 100644
--- a/arch/arm/boot/dts/apq8084-mdss.dtsi
+++ b/arch/arm/boot/dts/apq8084-mdss.dtsi
@@ -19,6 +19,8 @@
interrupts = <0 72 0>;
vdd-supply = <&gdsc_mdss>;
+ status = "disabled";
+
qcom,max-clk-rate = <320000000>;
qcom,mdss-pipe-vig-off = <0x00001200 0x00001600
diff --git a/arch/arm/boot/dts/dsi-panel-hx8394a-720p-video.dtsi b/arch/arm/boot/dts/dsi-panel-hx8394a-720p-video.dtsi
index 25c1851..c8d150a 100644
--- a/arch/arm/boot/dts/dsi-panel-hx8394a-720p-video.dtsi
+++ b/arch/arm/boot/dts/dsi-panel-hx8394a-720p-video.dtsi
@@ -10,98 +10,76 @@
* GNU General Public License for more details.
*/
+/*---------------------------------------------------------------------------
+ * This file is autogenerated file using gcdb parser. Please do not edit it.
+ * Update input XML file to add a new entry or update variable in this file
+ * VERSION = "1.0"
+ *---------------------------------------------------------------------------*/
&soc {
qcom,mdss_dsi_hx8394a_720p_video {
compatible = "qcom,mdss-dsi-panel";
- label = "hx8394a 720p video mode dsi panel";
status = "disable";
- qcom,dsi-ctrl-phandle = <&mdss_dsi0>;
- qcom,rst-gpio = <&msmgpio 25 0>;
- qcom,mdss-pan-res = <720 1280>;
- qcom,mdss-pan-bpp = <24>;
- qcom,mdss-pan-dest = "display_1";
- qcom,mdss-pan-porch-values = <59 60 79 10 2 7>;
- qcom,mdss-pan-underflow-clr = <0xff>;
- qcom,mdss-pan-bl-ctrl = "bl_ctrl_wled";
- qcom,mdss-pan-bl-levels = <1 4095>;
- qcom,mdss-pan-dsi-mode = <0>;
- qcom,mdss-pan-dsi-h-pulse-mode = <1>;
- qcom,mdss-pan-dsi-h-power-stop = <0 0 0>;
- qcom,mdss-pan-dsi-bllp-power-stop = <1 1>;
- qcom,mdss-pan-dsi-traffic-mode = <2>;
- qcom,mdss-pan-dsi-dst-format = <3>;
- qcom,mdss-pan-dsi-vc = <0>;
- qcom,mdss-pan-dsi-rgb-swap = <0>;
- qcom,mdss-pan-dsi-data-lanes = <1 1 1 1>; /* 4 lanes */
- qcom,mdss-pan-dsi-dlane-swap = <0>;
- qcom,mdss-pan-dsi-t-clk = <0x2d 0x1f>;
- qcom,mdss-pan-dsi-stream = <0>;
- qcom,mdss-pan-dsi-mdp-tr = <0x0>;
- qcom,mdss-pan-dsi-dma-tr = <0x04>;
- qcom,mdss-pan-dsi-frame-rate = <60>;
- qcom,panel-phy-regulatorSettings = [07 09 03 00 /* Regualotor settings */
- 20 00 01];
- qcom,panel-phy-timingSettings = [8d 24 19 00 34 34
- 1d 26 2a 03 04 00];
- qcom,panel-phy-strengthCtrl = [ff 06];
- qcom,panel-phy-bistCtrl = [00 00 b1 ff /* BIST Ctrl settings */
- 00 00];
- qcom,panel-phy-laneConfig = [00 00 00 00 00 00 00 01 97 /* lane0 config */
- 00 00 00 00 05 00 00 01 97 /* lane1 config */
- 00 00 00 00 0a 00 00 01 97 /* lane2 config */
- 00 00 00 00 0f 00 00 01 97 /* lane3 config */
- 00 c0 00 00 00 00 00 01 bb]; /* Clk ln config */
- qcom,panel-on-cmds = [39 01 00 00 00 00 04
- b9 ff 83 94
- 39 01 00 00 00 00 05
- c7 00 10 00 10
- 39 01 00 00 00 00 02
- bc 07
- 39 01 00 00 00 00 02
- ba 13
- 39 01 00 00 00 00 10
- b1 01 00 07 83 01
- 12 0f 32 38 29 29
- 50 02 00 00
- 39 01 00 00 00 00 07
- b2 00 c8 09 05 00
- 71
- 39 01 00 00 00 00 02
- cc 05
- 05 01 00 00 00 00 02 00 00
- 39 01 00 00 00 00 35
- d5 00 00 00 00 0a
- 00 01 00 00 00 33
- 00 23 45 67 01 01
- 23 88 88 88 88 88
- 88 88 99 99 99 88
- 88 99 88 54 32 10
- 76 32 10 88 88 88
- 88 88 88 88 99 99
- 99 88 88 88 99
- 39 01 00 00 00 00 17
- b4 80 08 32 10 00
- 32 15 08 32 12 20
- 33 05 4c 05 37 05
- 3f 1e 5f 5f 06
- 39 01 00 00 00 00 02
- b6 00
- 39 01 00 00 00 00 23
- e0 01 05 07 25 35
- 3f 0b 32 04 09 0e
- 10 13 10 14 16 1b
- 01 05 07 25 35 3f
- 0b 32 04 09 0e 10
- 13 10 14 16 1b
- 05 01 00 00 00 00 02 00 00
- 39 01 00 00 00 00 04
- bf 06 00 10
- 05 01 00 00 c8 00 02 11 00
- 05 01 00 00 32 00 02 29 00];
+ qcom,mdss-dsi-panel-name = "hx8394a 720p video mode dsi panel";
+ qcom,mdss-dsi-panel-controller = <&mdss_dsi0>;
+ qcom,mdss-dsi-panel-type = "dsi_video_mode";
+ qcom,mdss-dsi-panel-destination = "display_1";
+ qcom,mdss-dsi-panel-framerate = <60>;
+ qcom,mdss-dsi-virtual-channel-id = <0>;
+ qcom,mdss-dsi-stream = <0>;
+ qcom,mdss-dsi-panel-width = <720>;
+ qcom,mdss-dsi-panel-height = <1280>;
+ qcom,mdss-dsi-h-front-porch = <79>;
+ qcom,mdss-dsi-h-back-porch = <59>;
+ qcom,mdss-dsi-h-pulse-width = <60>;
+ qcom,mdss-dsi-h-sync-skew = <0>;
+ qcom,mdss-dsi-v-back-porch = <10>;
+ qcom,mdss-dsi-v-front-porch = <7>;
+ qcom,mdss-dsi-v-pulse-width = <2>;
+ qcom,mdss-dsi-h-left-border = <0>;
+ qcom,mdss-dsi-h-right-border = <0>;
+ qcom,mdss-dsi-v-top-border = <0>;
+ qcom,mdss-dsi-v-bottom-border = <0>;
+ qcom,mdss-dsi-bpp = <24>;
+ qcom,mdss-dsi-color-order = <0>;
+ qcom,mdss-dsi-underflow-color = <0xff>;
+ qcom,mdss-dsi-border-color = <0>;
+ qcom,mdss-dsi-on-command = [39 01 00 00 00 00 04 b9 ff 83 94
+ 39 01 00 00 00 00 05 c7 00 10 00 10
+ 39 01 00 00 00 00 02 bc 07
+ 39 01 00 00 00 00 02 ba 13
+ 39 01 00 00 00 00 10 b1 01 00 07 83 01 12 0f 32 38 29 29 50 02 00 00
+ 39 01 00 00 00 00 07 b2 00 c8 09 05 00 71
+ 39 01 00 00 00 00 02 cc 05
+ 05 01 00 00 00 00 02 00 00
+ 39 01 00 00 00 00 35 d5 00 00 00 00 0a 00 01 00 00 00 33 00 23 45 67 01 01 23 88 88 88 88 88 88 88 99 99 99 88 88 99 88 54 32 10 76 32 10 88 88 88 88 88 88 88 99 99 99 88 88 88 99
+ 39 01 00 00 00 00 17 b4 80 08 32 10 00 32 15 08 32 12 20 33 05 4c 05 37 05 3f 1e 5f 5f 06
+ 39 01 00 00 00 00 02 b6 00
+ 39 01 00 00 00 00 23 e0 01 05 07 25 35 3f 0b 32 04 09 0e 10 13 10 14 16 1b 01 05 07 25 35 3f 0b 32 04 09 0e 10 13 10 14 16 1b
+ 05 01 00 00 00 00 02 00 00
+ 39 01 00 00 00 00 04 bf 06 00 10
+ 05 01 00 00 c8 00 02 11 00
+ 05 01 00 00 32 00 02 29 00];
+ qcom,mdss-dsi-off-command = [05 01 00 00 0a 00 02 28 00
+ 05 01 00 00 96 00 02 10 00];
+ qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
+ qcom,mdss-dsi-off-command-state = "dsi_hs_mode";
+ qcom,mdss-dsi-h-sync-pulse = <1>;
+ qcom,mdss-dsi-traffic-mode = <2>;
+ qcom,mdss-dsi-lane-map = <0>;
+ qcom,mdss-dsi-bllp-eof-power-mode;
+ qcom,mdss-dsi-bllp-power-mode;
+ qcom,mdss-dsi-lane-0-state;
+ qcom,mdss-dsi-lane-1-state;
+ qcom,mdss-dsi-lane-2-state;
+ qcom,mdss-dsi-lane-3-state;
+ qcom,mdss-dsi-panel-timings = [8d 24 19 00 34 34 1d 26 2a 03 04 00];
+ qcom,mdss-dsi-t-clk-post = <0x1f>;
+ qcom,mdss-dsi-t-clk-pre = <0x2d>;
+ qcom,mdss-dsi-bl-min-level = <1>;
+ qcom,mdss-dsi-bl-max-level = <4095>;
+ qcom,mdss-dsi-dma-trigger = <4>;
+ qcom,mdss-dsi-mdp-trigger = <0>;
+ qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
- qcom,on-cmds-dsi-state = "DSI_LP_MODE";
- qcom,panel-off-cmds = [05 01 00 00 0a 00 02 28 00
- 05 01 00 00 96 00 02 10 00];
- qcom,off-cmds-dsi-state = "DSI_HS_MODE";
};
};
diff --git a/arch/arm/boot/dts/dsi-panel-nt35590-720p-cmd.dtsi b/arch/arm/boot/dts/dsi-panel-nt35590-720p-cmd.dtsi
index 2a6bbf9..d0b4da8 100644
--- a/arch/arm/boot/dts/dsi-panel-nt35590-720p-cmd.dtsi
+++ b/arch/arm/boot/dts/dsi-panel-nt35590-720p-cmd.dtsi
@@ -10,55 +10,40 @@
* GNU General Public License for more details.
*/
+/*---------------------------------------------------------------------------
+ * This file is autogenerated file using gcdb parser. Please do not edit it.
+ * Update input XML file to add a new entry or update variable in this file
+ * VERSION = "1.0"
+ *---------------------------------------------------------------------------*/
&soc {
qcom,mdss_dsi_nt35590_720p_cmd {
compatible = "qcom,mdss-dsi-panel";
- label = "nt35590 720p command mode dsi panel";
status = "disable";
- qcom,dsi-ctrl-phandle = <&mdss_dsi0>;
- qcom,rst-gpio = <&msmgpio 25 0>;
- qcom,te-gpio = <&msmgpio 24 0>;
- qcom,mdss-pan-res = <720 1280>;
- qcom,mdss-pan-bpp = <24>;
- qcom,mdss-pan-dest = "display_1";
- qcom,mdss-pan-porch-values = <164 8 140 1 1 6>;
- qcom,mdss-pan-underflow-clr = <0xff>;
- qcom,mdss-pan-bl-ctrl = "bl_ctrl_wled";
- qcom,mdss-pan-bl-levels = <1 4095>;
- qcom,mdss-pan-dsi-mode = <1>;
- qcom,mdss-vsync-enable = <1>;
- qcom,mdss-hw-vsync-mode = <1>;
- qcom,mdss-pan-dsi-h-pulse-mode = <1>;
- qcom,mdss-pan-dsi-h-power-stop = <0 0 0>;
- qcom,mdss-pan-dsi-bllp-power-stop = <1 1>;
- qcom,mdss-pan-dsi-traffic-mode = <2>;
- qcom,mdss-pan-dsi-dst-format = <8>;
- qcom,mdss-pan-insert-dcs-cmd = <1>;
- qcom,mdss-pan-wr-mem-continue = <0x3c>;
- qcom,mdss-pan-wr-mem-start = <0x2c>;
- qcom,mdss-pan-te-sel = <1>;
- qcom,mdss-pan-dsi-vc = <0>;
- qcom,mdss-pan-dsi-rgb-swap = <0>;
- qcom,mdss-pan-dsi-data-lanes = <1 1 1 1>; /* 4 lanes */
- qcom,mdss-pan-dsi-dlane-swap = <0>;
- qcom,mdss-pan-dsi-t-clk = <0x2c 0x20>;
- qcom,mdss-pan-dsi-stream = <0>;
- qcom,mdss-pan-dsi-mdp-tr = <0x0>;
- qcom,mdss-pan-dsi-dma-tr = <0x04>;
- qcom,mdss-pan-dsi-frame-rate = <60>;
- qcom,panel-phy-regulatorSettings = [07 09 03 00 /* Regualotor settings */
- 20 00 01];
- qcom,panel-phy-timingSettings = [7d 25 1d 00 37 33
- 22 27 1e 03 04 00];
- qcom,panel-phy-strengthCtrl = [ff 06];
- qcom,panel-phy-bistCtrl = [00 00 b1 ff /* BIST Ctrl settings */
- 00 00];
- qcom,panel-phy-laneConfig = [00 00 00 00 00 00 00 01 97 /* lane0 config */
- 00 00 00 00 05 00 00 01 97 /* lane1 config */
- 00 00 00 00 0a 00 00 01 97 /* lane2 config */
- 00 00 00 00 0f 00 00 01 97 /* lane3 config */
- 00 c0 00 00 00 00 00 01 bb]; /* Clk ln config */
- qcom,panel-on-cmds = [29 01 00 00 00 00 02 FF EE
+ qcom,mdss-dsi-panel-name = "nt35590 720p command mode dsi panel";
+ qcom,mdss-dsi-panel-controller = <&mdss_dsi0>;
+ qcom,mdss-dsi-panel-type = "dsi_cmd_mode";
+ qcom,mdss-dsi-panel-destination = "display_1";
+ qcom,mdss-dsi-panel-framerate = <60>;
+ qcom,mdss-dsi-virtual-channel-id = <0>;
+ qcom,mdss-dsi-stream = <0>;
+ qcom,mdss-dsi-panel-width = <720>;
+ qcom,mdss-dsi-panel-height = <1280>;
+ qcom,mdss-dsi-h-front-porch = <140>;
+ qcom,mdss-dsi-h-back-porch = <164>;
+ qcom,mdss-dsi-h-pulse-width = <8>;
+ qcom,mdss-dsi-h-sync-skew = <0>;
+ qcom,mdss-dsi-v-back-porch = <1>;
+ qcom,mdss-dsi-v-front-porch = <6>;
+ qcom,mdss-dsi-v-pulse-width = <1>;
+ qcom,mdss-dsi-h-left-border = <0>;
+ qcom,mdss-dsi-h-right-border = <0>;
+ qcom,mdss-dsi-v-top-border = <0>;
+ qcom,mdss-dsi-v-bottom-border = <0>;
+ qcom,mdss-dsi-bpp = <24>;
+ qcom,mdss-dsi-color-order = <0>;
+ qcom,mdss-dsi-underflow-color = <0xff>;
+ qcom,mdss-dsi-border-color = <0>;
+ qcom,mdss-dsi-on-command = [29 01 00 00 00 00 02 FF EE
29 01 00 00 00 00 02 26 08
29 01 00 00 00 00 02 26 00
29 01 00 00 10 00 02 FF 00
@@ -522,10 +507,32 @@
29 01 00 00 00 00 02 6A 60
29 01 00 00 00 00 02 FF 00
29 01 00 00 78 00 02 29 00];
-
- qcom,on-cmds-dsi-state = "DSI_LP_MODE";
- qcom,panel-off-cmds = [05 01 00 00 32 00 02 28 00
+ qcom,mdss-dsi-off-command = [05 01 00 00 32 00 02 28 00
05 01 00 00 78 00 02 10 00];
- qcom,off-cmds-dsi-state = "DSI_HS_MODE";
+ qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
+ qcom,mdss-dsi-off-command-state = "dsi_hs_mode";
+ qcom,mdss-dsi-h-sync-pulse = <1>;
+ qcom,mdss-dsi-traffic-mode = <2>;
+ qcom,mdss-dsi-lane-map = <0>;
+ qcom,mdss-dsi-bllp-eof-power-mode;
+ qcom,mdss-dsi-bllp-power-mode;
+ qcom,mdss-dsi-lane-0-state;
+ qcom,mdss-dsi-lane-1-state;
+ qcom,mdss-dsi-lane-2-state;
+ qcom,mdss-dsi-lane-3-state;
+ qcom,mdss-dsi-te-pin-select = <1>;
+ qcom,mdss-dsi-te-v-sync-rd-ptr-irq-line = <0x2c>;
+ qcom,mdss-dsi-te-dcs-command = <1>;
+ qcom,mdss-dsi-te-check-enable;
+ qcom,mdss-dsi-te-using-te-pin;
+ qcom,mdss-dsi-panel-timings = [7d 25 1d 00 37 33 22 27 1e 03 04 00];
+ qcom,mdss-dsi-t-clk-post = <0x20>;
+ qcom,mdss-dsi-t-clk-pre = <0x2c>;
+ qcom,mdss-dsi-bl-min-level = <1>;
+ qcom,mdss-dsi-bl-max-level = <4095>;
+ qcom,mdss-dsi-dma-trigger = <4>;
+ qcom,mdss-dsi-mdp-trigger = <0>;
+ qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
+
};
};
diff --git a/arch/arm/boot/dts/dsi-panel-nt35590-720p-video.dtsi b/arch/arm/boot/dts/dsi-panel-nt35590-720p-video.dtsi
index d742b30..a171a5c 100644
--- a/arch/arm/boot/dts/dsi-panel-nt35590-720p-video.dtsi
+++ b/arch/arm/boot/dts/dsi-panel-nt35590-720p-video.dtsi
@@ -10,48 +10,40 @@
* GNU General Public License for more details.
*/
+/*---------------------------------------------------------------------------
+ * This file is autogenerated file using gcdb parser. Please do not edit it.
+ * Update input XML file to add a new entry or update variable in this file
+ * VERSION = "1.0"
+ *---------------------------------------------------------------------------*/
&soc {
qcom,mdss_dsi_nt35590_720p_video {
compatible = "qcom,mdss-dsi-panel";
- label = "nt35590 720p video mode dsi panel";
status = "disable";
- qcom,dsi-ctrl-phandle = <&mdss_dsi0>;
- qcom,rst-gpio = <&msmgpio 25 0>;
- qcom,mdss-pan-res = <720 1280>;
- qcom,mdss-pan-bpp = <24>;
- qcom,mdss-pan-dest = "display_1";
- qcom,mdss-pan-porch-values = <164 8 140 1 1 6>;
- qcom,mdss-pan-underflow-clr = <0xff>;
- qcom,mdss-pan-bl-ctrl = "bl_ctrl_wled";
- qcom,mdss-pan-bl-levels = <1 4095>;
- qcom,mdss-pan-dsi-mode = <0>;
- qcom,mdss-pan-dsi-h-pulse-mode = <1>;
- qcom,mdss-pan-dsi-h-power-stop = <0 0 0>;
- qcom,mdss-pan-dsi-bllp-power-stop = <1 1>;
- qcom,mdss-pan-dsi-traffic-mode = <2>;
- qcom,mdss-pan-dsi-dst-format = <3>;
- qcom,mdss-pan-dsi-vc = <0>;
- qcom,mdss-pan-dsi-rgb-swap = <0>;
- qcom,mdss-pan-dsi-data-lanes = <1 1 1 1>; /* 4 lanes */
- qcom,mdss-pan-dsi-dlane-swap = <0>;
- qcom,mdss-pan-dsi-t-clk = <0x2c 0x20>;
- qcom,mdss-pan-dsi-stream = <0>;
- qcom,mdss-pan-dsi-mdp-tr = <0x0>;
- qcom,mdss-pan-dsi-dma-tr = <0x04>;
- qcom,mdss-pan-dsi-frame-rate = <60>;
- qcom,panel-phy-regulatorSettings = [07 09 03 00 /* Regualotor settings */
- 20 00 01];
- qcom,panel-phy-timingSettings = [7d 25 1d 00 37 33
- 22 27 1e 03 04 00];
- qcom,panel-phy-strengthCtrl = [ff 06];
- qcom,panel-phy-bistCtrl = [00 00 b1 ff /* BIST Ctrl settings */
- 00 00];
- qcom,panel-phy-laneConfig = [00 00 00 00 00 00 00 01 97 /* lane0 config */
- 00 00 00 00 05 00 00 01 97 /* lane1 config */
- 00 00 00 00 0a 00 00 01 97 /* lane2 config */
- 00 00 00 00 0f 00 00 01 97 /* lane3 config */
- 00 c0 00 00 00 00 00 01 bb]; /* Clk ln config */
- qcom,panel-on-cmds = [29 01 00 00 00 00 02 FF EE
+ qcom,mdss-dsi-panel-name = "nt35590 720p video mode dsi panel";
+ qcom,mdss-dsi-panel-controller = <&mdss_dsi0>;
+ qcom,mdss-dsi-panel-type = "dsi_video_mode";
+ qcom,mdss-dsi-panel-destination = "display_1";
+ qcom,mdss-dsi-panel-framerate = <60>;
+ qcom,mdss-dsi-virtual-channel-id = <0>;
+ qcom,mdss-dsi-stream = <0>;
+ qcom,mdss-dsi-panel-width = <720>;
+ qcom,mdss-dsi-panel-height = <1280>;
+ qcom,mdss-dsi-h-front-porch = <140>;
+ qcom,mdss-dsi-h-back-porch = <164>;
+ qcom,mdss-dsi-h-pulse-width = <8>;
+ qcom,mdss-dsi-h-sync-skew = <0>;
+ qcom,mdss-dsi-v-back-porch = <1>;
+ qcom,mdss-dsi-v-front-porch = <6>;
+ qcom,mdss-dsi-v-pulse-width = <1>;
+ qcom,mdss-dsi-h-left-border = <0>;
+ qcom,mdss-dsi-h-right-border = <0>;
+ qcom,mdss-dsi-v-top-border = <0>;
+ qcom,mdss-dsi-v-bottom-border = <0>;
+ qcom,mdss-dsi-bpp = <24>;
+ qcom,mdss-dsi-color-order = <0>;
+ qcom,mdss-dsi-underflow-color = <0xff>;
+ qcom,mdss-dsi-border-color = <0>;
+ qcom,mdss-dsi-on-command = [29 01 00 00 00 00 02 FF EE
29 01 00 00 00 00 02 26 08
29 01 00 00 00 00 02 26 00
29 01 00 00 10 00 02 FF 00
@@ -516,10 +508,27 @@
29 01 00 00 00 00 02 FF 00
29 01 00 00 78 00 02 29 00
29 01 00 00 78 00 02 53 2C];
-
- qcom,on-cmds-dsi-state = "DSI_LP_MODE";
- qcom,panel-off-cmds = [05 01 00 00 32 00 02 28 00
+ qcom,mdss-dsi-off-command = [05 01 00 00 32 00 02 28 00
05 01 00 00 78 00 02 10 00];
- qcom,off-cmds-dsi-state = "DSI_HS_MODE";
+ qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
+ qcom,mdss-dsi-off-command-state = "dsi_hs_mode";
+ qcom,mdss-dsi-h-sync-pulse = <1>;
+ qcom,mdss-dsi-traffic-mode = <2>;
+ qcom,mdss-dsi-lane-map = <0>;
+ qcom,mdss-dsi-bllp-eof-power-mode;
+ qcom,mdss-dsi-bllp-power-mode;
+ qcom,mdss-dsi-lane-0-state;
+ qcom,mdss-dsi-lane-1-state;
+ qcom,mdss-dsi-lane-2-state;
+ qcom,mdss-dsi-lane-3-state;
+ qcom,mdss-dsi-panel-timings = [7d 25 1d 00 37 33 22 27 1e 03 04 00];
+ qcom,mdss-dsi-t-clk-post = <0x20>;
+ qcom,mdss-dsi-t-clk-pre = <0x2c>;
+ qcom,mdss-dsi-bl-min-level = <1>;
+ qcom,mdss-dsi-bl-max-level = <4095>;
+ qcom,mdss-dsi-dma-trigger = <4>;
+ qcom,mdss-dsi-mdp-trigger = <0>;
+ qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
+
};
};
diff --git a/arch/arm/boot/dts/dsi-panel-nt35596-1080p-video.dtsi b/arch/arm/boot/dts/dsi-panel-nt35596-1080p-video.dtsi
index 1ecad71..998799a 100644
--- a/arch/arm/boot/dts/dsi-panel-nt35596-1080p-video.dtsi
+++ b/arch/arm/boot/dts/dsi-panel-nt35596-1080p-video.dtsi
@@ -10,48 +10,40 @@
* GNU General Public License for more details.
*/
+/*---------------------------------------------------------------------------
+ * This file is autogenerated file using gcdb parser. Please do not edit it.
+ * Update input XML file to add a new entry or update variable in this file
+ * VERSION = "1.0"
+ *---------------------------------------------------------------------------*/
&soc {
qcom,mdss_dsi_nt35596_1080p_video {
compatible = "qcom,mdss-dsi-panel";
- label = "nt35596 1080p video mode dsi panel";
status = "disable";
- qcom,dsi-ctrl-phandle = <&mdss_dsi0>;
- qcom,rst-gpio = <&msmgpio 25 0>;
- qcom,mdss-pan-res = <1080 1920>;
- qcom,mdss-pan-bpp = <24>;
- qcom,mdss-pan-dest = "display_1";
- qcom,mdss-pan-porch-values = <32 8 32 18 2 2>;
- qcom,mdss-pan-underflow-clr = <0xff>;
- qcom,mdss-pan-bl-ctrl = "bl_ctrl_wled";
- qcom,mdss-pan-bl-levels = <1 4095>;
- qcom,mdss-pan-dsi-mode = <0>;
- qcom,mdss-pan-dsi-h-pulse-mode = <1>;
- qcom,mdss-pan-dsi-h-power-stop = <0 0 0>;
- qcom,mdss-pan-dsi-bllp-power-stop = <1 1>;
- qcom,mdss-pan-dsi-traffic-mode = <2>;
- qcom,mdss-pan-dsi-dst-format = <3>;
- qcom,mdss-pan-dsi-vc = <0>;
- qcom,mdss-pan-dsi-rgb-swap = <0>;
- qcom,mdss-pan-dsi-data-lanes = <1 1 1 1>; /* 4 lanes */
- qcom,mdss-pan-dsi-dlane-swap = <0>;
- qcom,mdss-pan-dsi-t-clk = <0x38 0x1e>;
- qcom,mdss-pan-dsi-stream = <0>;
- qcom,mdss-pan-dsi-mdp-tr = <0x0>;
- qcom,mdss-pan-dsi-dma-tr = <0x04>;
- qcom,mdss-pan-dsi-frame-rate = <60>;
- qcom,panel-phy-regulatorSettings = [07 09 03 00 /* Regualotor settings */
- 20 00 01];
- qcom,panel-phy-timingSettings = [f9 3d 34 00 58 4d
- 36 3f 53 03 04 00];
- qcom,panel-phy-strengthCtrl = [ff 06];
- qcom,panel-phy-bistCtrl = [00 00 b1 ff /* BIST Ctrl settings */
- 00 00];
- qcom,panel-phy-laneConfig = [00 00 00 00 00 00 00 01 97 /* lane0 config */
- 00 00 00 00 05 00 00 01 97 /* lane1 config */
- 00 00 00 00 0a 00 00 01 97 /* lane2 config */
- 00 00 00 00 0f 00 00 01 97 /* lane3 config */
- 00 c0 00 00 00 00 00 01 bb]; /* Clk ln config */
- qcom,panel-on-cmds = [29 01 00 00 00 00 02 FF EE
+ qcom,mdss-dsi-panel-name = "nt35596 1080p video mode dsi panel";
+ qcom,mdss-dsi-panel-controller = <&mdss_dsi0>;
+ qcom,mdss-dsi-panel-type = "dsi_video_mode";
+ qcom,mdss-dsi-panel-destination = "display_1";
+ qcom,mdss-dsi-panel-framerate = <60>;
+ qcom,mdss-dsi-virtual-channel-id = <0>;
+ qcom,mdss-dsi-stream = <0>;
+ qcom,mdss-dsi-panel-width = <1080>;
+ qcom,mdss-dsi-panel-height = <1920>;
+ qcom,mdss-dsi-h-front-porch = <32>;
+ qcom,mdss-dsi-h-back-porch = <32>;
+ qcom,mdss-dsi-h-pulse-width = <8>;
+ qcom,mdss-dsi-h-sync-skew = <0>;
+ qcom,mdss-dsi-v-back-porch = <18>;
+ qcom,mdss-dsi-v-front-porch = <2>;
+ qcom,mdss-dsi-v-pulse-width = <2>;
+ qcom,mdss-dsi-h-left-border = <0>;
+ qcom,mdss-dsi-h-right-border = <0>;
+ qcom,mdss-dsi-v-top-border = <0>;
+ qcom,mdss-dsi-v-bottom-border = <0>;
+ qcom,mdss-dsi-bpp = <24>;
+ qcom,mdss-dsi-color-order = <0>;
+ qcom,mdss-dsi-underflow-color = <0xff>;
+ qcom,mdss-dsi-border-color = <0>;
+ qcom,mdss-dsi-on-command = [29 01 00 00 00 00 02 FF EE
29 01 00 00 00 00 02 FB 01
29 01 00 00 00 00 02 1F 45
29 01 00 00 00 00 02 24 4F
@@ -571,10 +563,27 @@
29 01 00 00 00 00 02 FF 00
29 01 00 00 00 00 02 35 00
29 01 00 00 78 00 02 29 00];
-
- qcom,on-cmds-dsi-state = "DSI_LP_MODE";
- qcom,panel-off-cmds = [05 01 00 00 32 00 02 28 00
+ qcom,mdss-dsi-off-command = [05 01 00 00 32 00 02 28 00
05 01 00 00 78 00 02 10 00];
- qcom,off-cmds-dsi-state = "DSI_HS_MODE";
+ qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
+ qcom,mdss-dsi-off-command-state = "dsi_hs_mode";
+ qcom,mdss-dsi-h-sync-pulse = <1>;
+ qcom,mdss-dsi-traffic-mode = <2>;
+ qcom,mdss-dsi-lane-map = <0>;
+ qcom,mdss-dsi-bllp-eof-power-mode;
+ qcom,mdss-dsi-bllp-power-mode;
+ qcom,mdss-dsi-lane-0-state;
+ qcom,mdss-dsi-lane-1-state;
+ qcom,mdss-dsi-lane-2-state;
+ qcom,mdss-dsi-lane-3-state;
+ qcom,mdss-dsi-panel-timings = [f9 3d 34 00 58 4d 36 3f 53 03 04 00];
+ qcom,mdss-dsi-t-clk-post = <0x1e>;
+ qcom,mdss-dsi-t-clk-pre = <0x38>;
+ qcom,mdss-dsi-bl-min-level = <1>;
+ qcom,mdss-dsi-bl-max-level = <4095>;
+ qcom,mdss-dsi-dma-trigger = <4>;
+ qcom,mdss-dsi-mdp-trigger = <0>;
+ qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
+
};
};
diff --git a/arch/arm/boot/dts/dsi-panel-sharp-qhd-video.dtsi b/arch/arm/boot/dts/dsi-panel-sharp-qhd-video.dtsi
index 45d396c..7fe0f7f 100644
--- a/arch/arm/boot/dts/dsi-panel-sharp-qhd-video.dtsi
+++ b/arch/arm/boot/dts/dsi-panel-sharp-qhd-video.dtsi
@@ -10,58 +10,65 @@
* GNU General Public License for more details.
*/
+/*---------------------------------------------------------------------------
+ * This file is autogenerated file using gcdb parser. Please do not edit it.
+ * Update input XML file to add a new entry or update variable in this file
+ * VERSION = "1.0"
+ *---------------------------------------------------------------------------*/
&soc {
qcom,mdss_dsi_sharp_qhd_video {
compatible = "qcom,mdss-dsi-panel";
- label = "sharp QHD LS043T1LE01 video mode dsi panel";
status = "disable";
- qcom,dsi-ctrl-phandle = <&mdss_dsi0>;
- qcom,enable-gpio = <&msmgpio 58 0>;
- qcom,rst-gpio = <&pm8941_gpios 19 0>;
- qcom,mdss-pan-res = <540 960>;
- qcom,mdss-pan-bpp = <24>;
- qcom,mdss-pan-dest = "display_1";
- qcom,mdss-pan-porch-values = <80 32 48 15 10 3>; /* HBP, HPW, HFP, VBP, VPW, VFP */
- qcom,mdss-pan-underflow-clr = <0xff>;
- qcom,mdss-pan-bl-ctrl = "bl_ctrl_wled";
- qcom,mdss-pan-bl-levels = <1 4095>;
- qcom,mdss-pan-dsi-mode = <0>;
- qcom,mdss-pan-dsi-h-pulse-mode = <1>;
- qcom,mdss-pan-dsi-h-power-stop = <0 0 0>;
- qcom,mdss-pan-dsi-bllp-power-stop = <1 1>;
- qcom,mdss-pan-dsi-traffic-mode = <0>;
- qcom,mdss-pan-dsi-dst-format = <3>;
- qcom,mdss-pan-dsi-vc = <0>;
- qcom,mdss-pan-dsi-rgb-swap = <2>;
- qcom,mdss-pan-dsi-data-lanes = <1 1 0 0>;
- qcom,mdss-pan-dsi-dlane-swap = <0>;
- qcom,mdss-pan-dsi-t-clk = <0x1c 0x04>;
- qcom,mdss-pan-dsi-stream = <0>;
- qcom,mdss-pan-dsi-mdp-tr = <0x04>;
- qcom,mdss-pan-dsi-dma-tr = <0x04>;
- qcom,mdss-pan-frame-rate = <60>;
- qcom,panel-phy-regulatorSettings = [07 09 03 00 /* Regulator settings */
- 20 00 01];
- qcom,panel-phy-timingSettings = [46 1d 20 00 39 3a
- 21 21 32 03 04 00];
- qcom,panel-phy-strengthCtrl = [ff 06];
- qcom,panel-phy-bistCtrl = [00 00 b1 ff /* BIST Ctrl settings */
- 00 00];
- qcom,panel-phy-laneConfig = [00 00 00 00 00 00 00 01 97 /* lane0 config */
- 00 00 00 00 05 00 00 01 97 /* lane1 config */
- 00 00 00 00 0a 00 00 01 97 /* lane2 config */
- 00 00 00 00 0f 00 00 01 97 /* lane3 config */
- 00 c0 00 00 00 00 00 01 bb]; /* Clk ln config */
- qcom,panel-on-cmds = [05 01 00 00 32 00 02 01 00 /* sw reset */
- 05 01 00 00 0a 00 02 11 00 /* exit sleep */
- 15 01 00 00 0a 00 02 53 2c /* backlight on */
- 15 01 00 00 0a 00 02 51 ff /* brightness max */
- 05 01 00 00 0a 00 02 29 00 /* display on */
- 15 01 00 00 0a 00 02 ae 03 /* set num of lanes */
- 15 01 00 00 0a 00 02 3a 77 /* rgb_888 */];
- qcom,on-cmds-dsi-state = "DSI_LP_MODE";
- qcom,panel-off-cmds = [05 01 00 00 0a 00 02 28 00 /* display off */
- 05 01 00 00 78 00 02 10 00 /* enter sleep */];
- qcom,off-cmds-dsi-state = "DSI_HS_MODE";
+ qcom,mdss-dsi-panel-name = "sharp QHD LS043T1LE01 video mode dsi panel";
+ qcom,mdss-dsi-panel-controller = <&mdss_dsi0>;
+ qcom,mdss-dsi-panel-type = "dsi_video_mode";
+ qcom,mdss-dsi-panel-destination = "display_1";
+ qcom,mdss-dsi-panel-framerate = <60>;
+ qcom,mdss-dsi-virtual-channel-id = <0>;
+ qcom,mdss-dsi-stream = <0>;
+ qcom,mdss-dsi-panel-width = <540>;
+ qcom,mdss-dsi-panel-height = <960>;
+ qcom,mdss-dsi-h-front-porch = <48>;
+ qcom,mdss-dsi-h-back-porch = <80>;
+ qcom,mdss-dsi-h-pulse-width = <32>;
+ qcom,mdss-dsi-h-sync-skew = <0>;
+ qcom,mdss-dsi-v-back-porch = <15>;
+ qcom,mdss-dsi-v-front-porch = <3>;
+ qcom,mdss-dsi-v-pulse-width = <10>;
+ qcom,mdss-dsi-h-left-border = <0>;
+ qcom,mdss-dsi-h-right-border = <0>;
+ qcom,mdss-dsi-v-top-border = <0>;
+ qcom,mdss-dsi-v-bottom-border = <0>;
+ qcom,mdss-dsi-bpp = <24>;
+ qcom,mdss-dsi-color-order = <2>;
+ qcom,mdss-dsi-underflow-color = <0xff>;
+ qcom,mdss-dsi-border-color = <0>;
+ qcom,mdss-dsi-on-command = [05 01 00 00 32 00 02 01 00
+ 05 01 00 00 0a 00 02 11 00
+ 15 01 00 00 0a 00 02 53 2c
+ 15 01 00 00 0a 00 02 51 ff
+ 05 01 00 00 0a 00 02 29 00
+ 15 01 00 00 0a 00 02 ae 03
+ 15 01 00 00 0a 00 02 3a 77];
+ qcom,mdss-dsi-off-command = [05 01 00 00 0a 00 02 28 00
+ 05 01 00 00 78 00 02 10 00];
+ qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
+ qcom,mdss-dsi-off-command-state = "dsi_hs_mode";
+ qcom,mdss-dsi-h-sync-pulse = <1>;
+ qcom,mdss-dsi-traffic-mode = <0>;
+ qcom,mdss-dsi-lane-map = <0>;
+ qcom,mdss-dsi-bllp-eof-power-mode;
+ qcom,mdss-dsi-bllp-power-mode;
+ qcom,mdss-dsi-lane-0-state;
+ qcom,mdss-dsi-lane-1-state;
+ qcom,mdss-dsi-panel-timings = [46 1d 20 00 39 3a 21 21 32 03 04 00];
+ qcom,mdss-dsi-t-clk-post = <0x04>;
+ qcom,mdss-dsi-t-clk-pre = <0x1c>;
+ qcom,mdss-dsi-bl-min-level = <1>;
+ qcom,mdss-dsi-bl-max-level = <4095>;
+ qcom,mdss-dsi-dma-trigger = <4>;
+ qcom,mdss-dsi-mdp-trigger = <4>;
+ qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
+
};
};
diff --git a/arch/arm/boot/dts/dsi-panel-toshiba-720p-video.dtsi b/arch/arm/boot/dts/dsi-panel-toshiba-720p-video.dtsi
index 5c37cf8..a824d45 100644
--- a/arch/arm/boot/dts/dsi-panel-toshiba-720p-video.dtsi
+++ b/arch/arm/boot/dts/dsi-panel-toshiba-720p-video.dtsi
@@ -10,115 +10,88 @@
* GNU General Public License for more details.
*/
+/*---------------------------------------------------------------------------
+ * This file is autogenerated file using gcdb parser. Please do not edit it.
+ * Update input XML file to add a new entry or update variable in this file
+ * VERSION = "1.0"
+ *---------------------------------------------------------------------------*/
&soc {
-
qcom,mdss_dsi_toshiba_720p_video {
compatible = "qcom,mdss-dsi-panel";
- label = "toshiba 720p video mode dsi panel";
status = "disable";
- qcom,dsi-ctrl-phandle = <&mdss_dsi0>;
- qcom,enable-gpio = <&msmgpio 58 0>;
- qcom,rst-gpio = <&pm8941_gpios 19 0>;
- qcom,mdss-pan-res = <720 1280>;
- qcom,mdss-pan-bpp = <24>;
- qcom,mdss-pan-dest = "display_1";
- qcom,mdss-pan-porch-values = <32 12 144 3 4 9>;
- qcom,mdss-pan-underflow-clr = <0xff>;
- qcom,mdss-pan-bl-ctrl = "bl_ctrl_wled";
- qcom,mdss-pan-bl-levels = <1 4095>;
- qcom,mdss-pan-dsi-mode = <0>;
- qcom,mdss-pan-dsi-h-pulse-mode = <0>;
- qcom,mdss-pan-dsi-h-power-stop = <0 0 0>;
- qcom,mdss-pan-dsi-bllp-power-stop = <1 1>;
- qcom,mdss-pan-dsi-traffic-mode = <1>;
- qcom,mdss-pan-dsi-dst-format = <3>;
- qcom,mdss-pan-dsi-vc = <0>;
- qcom,mdss-pan-dsi-rgb-swap = <0>;
- qcom,mdss-pan-dsi-data-lanes = <1 1 1 1>;
- qcom,mdss-pan-dsi-dlane-swap = <0>;
- qcom,mdss-pan-dsi-t-clk = <0x1b 0x04>;
- qcom,mdss-pan-dsi-stream = <0>;
- qcom,mdss-pan-dsi-mdp-tr = <0x0>;
- qcom,mdss-pan-dsi-dma-tr = <0x04>;
- qcom,mdss-pan-dsi-frame-rate = <60>;
- qcom,panel-phy-regulatorSettings = [07 09 03 00 /* Regualotor settings */
- 20 00 01];
- qcom,panel-phy-timingSettings = [b0 23 1b 00 94 93
- 1e 25 15 03 04 00];
- qcom,panel-phy-strengthCtrl = [ff 06];
- qcom,panel-phy-bistCtrl = [00 00 b1 ff /* BIST Ctrl settings */
- 00 00];
- qcom,panel-phy-laneConfig = [00 00 00 00 00 00 00 01 97 /* lane0 config */
- 00 00 00 00 05 00 00 01 97 /* lane1 config */
- 00 00 00 00 0a 00 00 01 97 /* lane2 config */
- 00 00 00 00 0f 00 00 01 97 /* lane3 config */
- 00 c0 00 00 00 00 00 01 bb]; /* Clk ln config */
+ qcom,mdss-dsi-panel-name = "toshiba 720p video mode dsi panel";
+ qcom,mdss-dsi-panel-controller = <&mdss_dsi0>;
+ qcom,mdss-dsi-panel-type = "dsi_video_mode";
+ qcom,mdss-dsi-panel-destination = "display_1";
+ qcom,mdss-dsi-panel-framerate = <60>;
+ qcom,mdss-dsi-virtual-channel-id = <0>;
+ qcom,mdss-dsi-stream = <0>;
+ qcom,mdss-dsi-panel-width = <720>;
+ qcom,mdss-dsi-panel-height = <1280>;
+ qcom,mdss-dsi-h-front-porch = <144>;
+ qcom,mdss-dsi-h-back-porch = <32>;
+ qcom,mdss-dsi-h-pulse-width = <12>;
+ qcom,mdss-dsi-h-sync-skew = <0>;
+ qcom,mdss-dsi-v-back-porch = <3>;
+ qcom,mdss-dsi-v-front-porch = <9>;
+ qcom,mdss-dsi-v-pulse-width = <4>;
+ qcom,mdss-dsi-h-left-border = <0>;
+ qcom,mdss-dsi-h-right-border = <0>;
+ qcom,mdss-dsi-v-top-border = <0>;
+ qcom,mdss-dsi-v-bottom-border = <0>;
+ qcom,mdss-dsi-bpp = <24>;
+ qcom,mdss-dsi-color-order = <0>;
+ qcom,mdss-dsi-underflow-color = <0xff>;
+ qcom,mdss-dsi-border-color = <0>;
+ qcom,mdss-dsi-on-command = [23 01 00 00 0a 00 02 b0 00
+ 23 01 00 00 0a 00 02 b2 00
+ 23 01 00 00 0a 00 02 b3 0c
+ 23 01 00 00 0a 00 02 b4 02
+ 29 01 00 00 00 00 06 c0 40 02 7f c8 08
+ 29 01 00 00 00 00 10 c1 00 a8 00 00 00 00 00 9d 08 27 00 00 00 00 00
+ 29 01 00 00 00 00 06 c2 00 00 09 00 00
+ 23 01 00 00 0a 00 02 c3 04
+ 29 01 00 00 00 00 04 c4 4d 83 00
+ 29 01 00 00 00 00 0b c6 12 00 08 71 00 00 00 80 00 04
+ 23 01 00 00 0a 00 02 c7 22
+ 29 01 00 00 00 00 05 c8 4c 0c 0c 0c
+ 29 01 00 00 00 00 0e c9 00 40 00 16 32 2e 3a 43 3e 3c 45 79 3f
+ 29 01 00 00 00 00 0e ca 00 46 1a 23 21 1c 25 31 2d 49 5f 7f 3f
+ 29 01 00 00 00 00 0e cb 00 4c 20 3a 42 40 47 4b 42 3e 46 7e 3f
+ 29 01 00 00 00 00 0e cc 00 41 19 21 1d 14 18 1f 1d 25 3f 73 3f
+ 29 01 00 00 00 00 0e cd 23 79 5a 5f 57 4c 51 51 45 3f 4b 7f 3f
+ 29 01 00 00 00 00 0e ce 00 40 14 20 1a 0e 0e 13 08 00 05 46 1c
+ 29 01 00 00 00 00 04 d0 6a 64 01
+ 29 01 00 00 00 00 03 d1 77 d4
+ 23 01 00 00 0a 00 02 d3 33
+ 29 01 00 00 00 00 03 d5 0f 0f
+ 29 01 00 00 00 00 07 d8 34 64 23 25 62 32
+ 29 01 00 00 00 00 0c de 10 7b 11 0a 00 00 00 00 00 00 00
+ 29 01 00 00 00 00 09 fd 04 55 53 00 70 ff 10 73
+ 23 01 00 00 0a 00 02 e2 00
+ 05 01 00 00 78 00 02 11 00
+ 05 01 00 00 32 00 02 29 00];
+ qcom,mdss-dsi-off-command = [05 01 00 00 32 00 02 28 00
+ 05 01 00 00 78 00 02 10 00];
+ qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
+ qcom,mdss-dsi-off-command-state = "dsi_hs_mode";
+ qcom,mdss-dsi-h-sync-pulse = <0>;
+ qcom,mdss-dsi-traffic-mode = <1>;
+ qcom,mdss-dsi-lane-map = <0>;
+ qcom,mdss-dsi-bllp-eof-power-mode;
+ qcom,mdss-dsi-bllp-power-mode;
+ qcom,mdss-dsi-lane-0-state;
+ qcom,mdss-dsi-lane-1-state;
+ qcom,mdss-dsi-lane-2-state;
+ qcom,mdss-dsi-lane-3-state;
+ qcom,mdss-dsi-panel-timings = [b0 23 1b 00 94 93 1e 25 15 03 04 00];
+ qcom,mdss-dsi-t-clk-post = <0x04>;
+ qcom,mdss-dsi-t-clk-pre = <0x1b>;
+ qcom,mdss-dsi-bl-min-level = <1>;
+ qcom,mdss-dsi-bl-max-level = <4095>;
+ qcom,mdss-dsi-dma-trigger = <0x04>;
+ qcom,mdss-dsi-mdp-trigger = <0x0>;
+ qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
- qcom,panel-on-cmds = [23 01 00 00 0a 00 02 b0 00
- 23 01 00 00 0a 00 02 b2 00
- 23 01 00 00 0a 00 02 b3 0c
- 23 01 00 00 0a 00 02 b4 02
- 29 01 00 00 00 00 06
- c0 40 02 7f c8 08
- 29 01 00 00 00 00 10
- c1 00 a8 00 00 00
- 00 00 9d 08 27 00
- 00 00 00 00
- 29 01 00 00 00 00 06
- c2 00 00 09 00 00
- 23 01 00 00 0a 00 02 c3 04
- 29 01 00 00 00 00 04
- c4 4d 83 00
- 29 01 00 00 00 00 0b
- c6 12 00 08 71 00
- 00 00 80 00 04
- 23 01 00 00 0a 00 02 c7 22
- 29 01 00 00 00 00 05
- c8 4c 0c 0c 0c
- 29 01 00 00 00 00 0e
- c9 00 40 00 16 32
- 2e 3a 43 3e 3c 45
- 79 3f
- 29 01 00 00 00 00 0e
- ca 00 46 1a 23 21
- 1c 25 31 2d 49 5f
- 7f 3f
- 29 01 00 00 00 00 0e
- cb 00 4c 20 3a 42
- 40 47 4b 42 3e 46
- 7e 3f
- 29 01 00 00 00 00 0e
- cc 00 41 19 21 1d
- 14 18 1f 1d 25 3f
- 73 3f
- 29 01 00 00 00 00 0e
- cd 23 79 5a 5f 57
- 4c 51 51 45 3f 4b
- 7f 3f
- 29 01 00 00 00 00 0e
- ce 00 40 14 20 1a
- 0e 0e 13 08 00 05
- 46 1c
- 29 01 00 00 00 00 04
- d0 6a 64 01
- 29 01 00 00 00 00 03 d1 77 d4
- 23 01 00 00 0a 00 02 d3 33
- 29 01 00 00 00 00 03 d5 0f 0f
- 29 01 00 00 00 00 07
- d8 34 64 23 25 62
- 32
- 29 01 00 00 00 00 0c
- de 10 7b 11 0a 00
- 00 00 00 00 00 00
- 29 01 00 00 00 00 09
- fd 04 55 53 00 70
- ff 10 73
- 23 01 00 00 0a 00 02 e2 00
- 05 01 00 00 78 00 02 11 00
- 05 01 00 00 32 00 02 29 00];
- qcom,on-cmds-dsi-state = "DSI_LP_MODE";
- qcom,panel-off-cmds = [05 01 00 00 32 00 02 28 00
- 05 01 00 00 78 00 02 10 00];
- qcom,off-cmds-dsi-state = "DSI_HS_MODE";
};
};
diff --git a/arch/arm/boot/dts/msm8226-camera-sensor-qrd.dtsi b/arch/arm/boot/dts/msm8226-camera-sensor-qrd.dtsi
index 83b6ea6..fb24a25 100644
--- a/arch/arm/boot/dts/msm8226-camera-sensor-qrd.dtsi
+++ b/arch/arm/boot/dts/msm8226-camera-sensor-qrd.dtsi
@@ -156,4 +156,45 @@
qcom,cci-master = <0>;
status = "ok";
};
+
+ qcom,camera@6a {
+ compatible = "qcom,ov5648";
+ reg = <0x6a>;
+ qcom,slave-id = <0x6c 0x300a 0x5648>;
+ qcom,csiphy-sd-index = <1>;
+ qcom,csid-sd-index = <1>;
+ qcom,mount-angle = <270>;
+ qcom,sensor-name = "skuf_ov5648_p5v23c";
+ cam_vdig-supply = <&pm8226_l5>;
+ cam_vana-supply = <&pm8226_l19>;
+ cam_vio-supply = <&pm8226_lvs1>;
+ qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
+ qcom,cam-vreg-type = <0 1 0>;
+ qcom,cam-vreg-min-voltage = <1200000 0 2850000>;
+ qcom,cam-vreg-max-voltage = <1200000 0 2850000>;
+ qcom,cam-vreg-op-mode = <200000 0 80000>;
+ qcom,gpio-no-mux = <0>;
+ gpios = <&msmgpio 26 0>,
+ <&msmgpio 28 0>,
+ <&msmgpio 35 0>,
+ <&msmgpio 21 0>;
+ qcom,gpio-reset = <1>;
+ qcom,gpio-standby = <2>;
+ qcom,gpio-vdig = <3>;
+ qcom,gpio-req-tbl-num = <0 1 2 3>;
+ qcom,gpio-req-tbl-flags = <1 0 0 0>;
+ qcom,gpio-req-tbl-label = "CAMIF_MCLK",
+ "CAM_RESET",
+ "CAM_STANDBY",
+ "CAM_VDIG";
+ qcom,gpio-set-tbl-num = <1 1>;
+ qcom,gpio-set-tbl-flags = <0 2>;
+ qcom,gpio-set-tbl-delay = <1000 4000>;
+ qcom,csi-lane-assign = <0x4320>;
+ qcom,csi-lane-mask = <0x3>;
+ qcom,sensor-position = <0>;
+ qcom,sensor-mode = <1>;
+ qcom,cci-master = <0>;
+ status = "ok";
+ };
};
diff --git a/arch/arm/boot/dts/msm8226-mdss.dtsi b/arch/arm/boot/dts/msm8226-mdss.dtsi
index b895c64..5f991fb 100644
--- a/arch/arm/boot/dts/msm8226-mdss.dtsi
+++ b/arch/arm/boot/dts/msm8226-mdss.dtsi
@@ -62,14 +62,54 @@
label = "MDSS DSI CTRL->0";
cell-index = <0>;
reg = <0xfd922800 0x600>;
+ qcom,mdss-fb-map = <&mdss_fb0>;
vdd-supply = <&pm8226_l15>;
vddio-supply = <&pm8226_l8>;
vdda-supply = <&pm8226_l4>;
- qcom,supply-names = "vdd", "vddio", "vdda";
- qcom,supply-min-voltage-level = <2800000 1800000 1200000>;
- qcom,supply-max-voltage-level = <2800000 1800000 1200000>;
- qcom,supply-peak-current = <150000 100000 100000>;
- qcom,mdss-fb-map = <&mdss_fb0>;
+ qcom,platform-reset-gpio = <&msmgpio 25 1>;
+ qcom,platform-te-gpio = <&msmgpio 24 0>;
+ qcom,platform-strength-ctrl = [ff 06];
+ qcom,platform-bist-ctrl = [00 00 b1 ff 00 00];
+ qcom,platform-regulator-settings = [07 09 03 00 20 00 01];
+ qcom,platform-lane-config = [00 00 00 00 00 00 00 01 97
+ 00 00 00 00 05 00 00 01 97
+ 00 00 00 00 0a 00 00 01 97
+ 00 00 00 00 0f 00 00 01 97
+ 00 c0 00 00 00 00 00 01 bb];
+ qcom,platform-reset-sequence = <1 20 0 1 1 20>;
+ qcom,platform-supply-entry1 {
+ qcom,supply-name = "vdd";
+ qcom,supply-min-voltage = <2800000>;
+ qcom,supply-max-voltage = <2800000>;
+ qcom,supply-enable-load = <100000>;
+ qcom,supply-disable-load = <100>;
+ qcom,supply-pre-on-sleep = <0>;
+ qcom,supply-post-on-sleep = <0>;
+ qcom,supply-pre-off-sleep = <0>;
+ qcom,supply-post-off-sleep = <0>;
+ };
+ qcom,platform-supply-entry2 {
+ qcom,supply-name = "vddio";
+ qcom,supply-min-voltage = <1800000>;
+ qcom,supply-max-voltage = <1800000>;
+ qcom,supply-enable-load = <100000>;
+ qcom,supply-disable-load = <100>;
+ qcom,supply-pre-on-sleep = <0>;
+ qcom,supply-post-on-sleep = <0>;
+ qcom,supply-pre-off-sleep = <0>;
+ qcom,supply-post-off-sleep = <0>;
+ };
+ qcom,platform-supply-entry3 {
+ qcom,supply-name = "vdda";
+ qcom,supply-min-voltage = <1200000>;
+ qcom,supply-max-voltage = <1200000>;
+ qcom,supply-enable-load = <100000>;
+ qcom,supply-disable-load = <100>;
+ qcom,supply-pre-on-sleep = <0>;
+ qcom,supply-post-on-sleep = <20>;
+ qcom,supply-pre-off-sleep = <0>;
+ qcom,supply-post-off-sleep = <0>;
+ };
};
qcom,mdss_wb_panel {
diff --git a/arch/arm/boot/dts/msm8226-regulator.dtsi b/arch/arm/boot/dts/msm8226-regulator.dtsi
index 571ddc3..d587b77 100644
--- a/arch/arm/boot/dts/msm8226-regulator.dtsi
+++ b/arch/arm/boot/dts/msm8226-regulator.dtsi
@@ -43,7 +43,7 @@
qcom,pvs-bin-process = <0 0 0 0 0 1 1 1 1 1 2 2 2 2 2 2
2 2 2 2 3 3 3 3 3 3 3 3 0 0 0 0>;
- qcom,pvs-corner-ceiling-slow = <1155000 1160000 1275000>;
+ qcom,pvs-corner-ceiling-slow = <1050000 1160000 1275000>;
qcom,pvs-corner-ceiling-nom = <1050000 1075000 1200000>;
qcom,pvs-corner-ceiling-fast = <1050000 1050000 1140000>;
vdd-apc-supply = <&pm8226_s2>;
diff --git a/arch/arm/boot/dts/msm8226-v1-qrd-skuf.dts b/arch/arm/boot/dts/msm8226-v1-qrd-skuf.dts
index cb5e299..936f87f 100644
--- a/arch/arm/boot/dts/msm8226-v1-qrd-skuf.dts
+++ b/arch/arm/boot/dts/msm8226-v1-qrd-skuf.dts
@@ -56,3 +56,60 @@
qcom,cdc-us-euro-gpios;
};
};
+
+&spmi_bus {
+ qcom,pm8226@0 {
+ qcom,leds@a300 {
+ status = "disabled";
+ };
+
+ qcom,leds@a500 {
+ status = "disabled";
+ };
+ };
+};
+
+&pm8226_mpps {
+ mpp@a300 { /* MPP 4 */
+ /* camera2_id */
+ qcom,mode = <4>; /* AIN input */
+ qcom,invert = <1>; /* Enable MPP */
+ qcom,ain-route = <3>; /* AMUX 8 */
+ qcom,master-en = <1>;
+ qcom,src-sel = <0>; /* Function constant */
+ };
+
+ mpp@a500 { /* MPP 6 */
+ /* camera_id */
+ qcom,mode = <4>; /* AIN input */
+ qcom,invert = <1>; /* Enable MPP */
+ qcom,ain-route = <1>; /* AMUX 6 */
+ qcom,master-en = <1>;
+ qcom,src-sel = <0>; /* Function constant */
+ };
+
+};
+
+&pm8226_vadc {
+ chan@13 {
+ label = "camera2_id";
+ reg = <0x13>;
+ qcom,decimation = <0>;
+ qcom,pre-div-channel-scaling = <0>;
+ qcom,calibration-type = "absolute";
+ qcom,scale-function = <0>;
+ qcom,hw-settle-time = <0>;
+ qcom,fast-avg-setup = <0>;
+ };
+
+ chan@15 {
+ label = "camera_id";
+ reg = <0x15>;
+ qcom,decimation = <0>;
+ qcom,pre-div-channel-scaling = <0>;
+ qcom,calibration-type = "absolute";
+ qcom,scale-function = <0>;
+ qcom,hw-settle-time = <0>;
+ qcom,fast-avg-setup = <0>;
+ };
+};
diff --git a/arch/arm/boot/dts/msm8226-v2-qrd-skuf.dts b/arch/arm/boot/dts/msm8226-v2-qrd-skuf.dts
index ac8b437..b34fb94 100644
--- a/arch/arm/boot/dts/msm8226-v2-qrd-skuf.dts
+++ b/arch/arm/boot/dts/msm8226-v2-qrd-skuf.dts
@@ -57,3 +57,60 @@
qcom,cdc-us-euro-gpios;
};
};
+
+&spmi_bus {
+ qcom,pm8226@0 {
+ qcom,leds@a300 {
+ status = "disabled";
+ };
+
+ qcom,leds@a500 {
+ status = "disabled";
+ };
+ };
+};
+
+&pm8226_mpps {
+ mpp@a300 { /* MPP 4 */
+ /* camera2_id */
+ qcom,mode = <4>; /* AIN input */
+ qcom,invert = <1>; /* Enable MPP */
+ qcom,ain-route = <3>; /* AMUX 8 */
+ qcom,master-en = <1>;
+ qcom,src-sel = <0>; /* Function constant */
+ };
+
+ mpp@a500 { /* MPP 6 */
+ /* camera_id */
+ qcom,mode = <4>; /* AIN input */
+ qcom,invert = <1>; /* Enable MPP */
+ qcom,ain-route = <1>; /* AMUX 6 */
+ qcom,master-en = <1>;
+ qcom,src-sel = <0>; /* Function constant */
+ };
+
+};
+
+&pm8226_vadc {
+ chan@13 {
+ label = "camera2_id";
+ reg = <0x13>;
+ qcom,decimation = <0>;
+ qcom,pre-div-channel-scaling = <0>;
+ qcom,calibration-type = "absolute";
+ qcom,scale-function = <0>;
+ qcom,hw-settle-time = <0>;
+ qcom,fast-avg-setup = <0>;
+ };
+
+ chan@15 {
+ label = "camera_id";
+ reg = <0x15>;
+ qcom,decimation = <0>;
+ qcom,pre-div-channel-scaling = <0>;
+ qcom,calibration-type = "absolute";
+ qcom,scale-function = <0>;
+ qcom,hw-settle-time = <0>;
+ qcom,fast-avg-setup = <0>;
+ };
+};
diff --git a/arch/arm/boot/dts/msm8226-v2.dtsi b/arch/arm/boot/dts/msm8226-v2.dtsi
index b44cb681..1dab78a 100644
--- a/arch/arm/boot/dts/msm8226-v2.dtsi
+++ b/arch/arm/boot/dts/msm8226-v2.dtsi
@@ -42,7 +42,7 @@
&apc_vreg_corner {
qcom,pvs-bin-process = <1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2
2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3>;
- qcom,pvs-corner-ceiling-slow = <1160000 1160000 1280000>;
+ qcom,pvs-corner-ceiling-slow = <1050000 1160000 1280000>;
qcom,pvs-corner-ceiling-nom = <1050000 1080000 1200000>;
qcom,pvs-corner-ceiling-fast = <1050000 1050000 1140000>;
qcom,cpr-step-quotient = <30>;
diff --git a/arch/arm/boot/dts/msm8610-regulator.dtsi b/arch/arm/boot/dts/msm8610-regulator.dtsi
index cf54098..34cbd99 100644
--- a/arch/arm/boot/dts/msm8610-regulator.dtsi
+++ b/arch/arm/boot/dts/msm8610-regulator.dtsi
@@ -43,9 +43,9 @@
qcom,pvs-bin-process = <1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1>;
- qcom,pvs-corner-ceiling-slow = <1150000 1150000 1275000>;
- qcom,pvs-corner-ceiling-nom = <1075000 1075000 1200000>;
- qcom,pvs-corner-ceiling-fast = <1000000 1000000 1140000>;
+ qcom,pvs-corner-ceiling-slow = <1050000 1150000 1275000>;
+ qcom,pvs-corner-ceiling-nom = <1050000 1075000 1200000>;
+ qcom,pvs-corner-ceiling-fast = <1050000 1050000 1140000>;
vdd-apc-supply = <&pm8110_s2>;
vdd-mx-supply = <&pm8110_l3_ao>;
@@ -54,12 +54,12 @@
qcom,cpr-ref-clk = <19200>;
qcom,cpr-timer-delay = <5000>;
- qcom,cpr-timer-cons-up = <1>;
+ qcom,cpr-timer-cons-up = <0>;
qcom,cpr-timer-cons-down = <2>;
qcom,cpr-irq-line = <0>;
qcom,cpr-step-quotient = <15>;
- qcom,cpr-up-threshold = <1>;
- qcom,cpr-down-threshold = <2>;
+ qcom,cpr-up-threshold = <0>;
+ qcom,cpr-down-threshold = <10>;
qcom,cpr-idle-clocks = <5>;
qcom,cpr-gcnt-time = <1>;
qcom,vdd-apc-step-up-limit = <1>;
@@ -77,6 +77,8 @@
qcom,cpr-fuse-redun-bp-scheme = <25>;
qcom,cpr-fuse-redun-target-quot = <32 12 0>;
qcom,cpr-fuse-redun-ro-sel = <44 26 29>;
+
+ qcom,cpr-enable;
};
};
diff --git a/arch/arm/boot/dts/msm8974-mdss.dtsi b/arch/arm/boot/dts/msm8974-mdss.dtsi
index 46bb71a..52d730d 100644
--- a/arch/arm/boot/dts/msm8974-mdss.dtsi
+++ b/arch/arm/boot/dts/msm8974-mdss.dtsi
@@ -86,6 +86,50 @@
vddio-supply = <&pm8941_l12>;
vdda-supply = <&pm8941_l2>;
qcom,mdss-fb-map = <&mdss_fb0>;
+ qcom,platform-reset-gpio = <&pm8941_gpios 19 1>;
+ qcom,platform-enable-gpio = <&msmgpio 58 1>;
+ qcom,platform-reset-sequence = <1 20 0 200 1 20 2>;
+ qcom,platform-strength-ctrl = [ff 06];
+ qcom,platform-bist-ctrl = [00 00 b1 ff 00 00];
+ qcom,platform-regulator-settings = [07 09 03 00 20 00 01];
+ qcom,platform-lane-config = [00 00 00 00 00 00 00 01 97
+ 00 00 00 00 05 00 00 01 97
+ 00 00 00 00 0a 00 00 01 97
+ 00 00 00 00 0f 00 00 01 97
+ 00 c0 00 00 00 00 00 01 bb];
+ qcom,platform-supply-entry1 {
+ qcom,supply-name = "vdd";
+ qcom,supply-min-voltage = <3000000>;
+ qcom,supply-max-voltage = <3000000>;
+ qcom,supply-enable-load = <100000>;
+ qcom,supply-disable-load = <100>;
+ qcom,supply-pre-on-sleep = <0>;
+ qcom,supply-post-on-sleep = <20>;
+ qcom,supply-pre-off-sleep = <0>;
+ qcom,supply-post-off-sleep = <0>;
+ };
+ qcom,platform-supply-entry2 {
+ qcom,supply-name = "vddio";
+ qcom,supply-min-voltage = <1800000>;
+ qcom,supply-max-voltage = <1800000>;
+ qcom,supply-enable-load = <100000>;
+ qcom,supply-disable-load = <100>;
+ qcom,supply-pre-on-sleep = <0>;
+ qcom,supply-post-on-sleep = <20>;
+ qcom,supply-pre-off-sleep = <0>;
+ qcom,supply-post-off-sleep = <0>;
+ };
+ qcom,platform-supply-entry3 {
+ qcom,supply-name = "vdda";
+ qcom,supply-min-voltage = <1200000>;
+ qcom,supply-max-voltage = <1200000>;
+ qcom,supply-enable-load = <100000>;
+ qcom,supply-disable-load = <100>;
+ qcom,supply-pre-on-sleep = <0>;
+ qcom,supply-post-on-sleep = <0>;
+ qcom,supply-pre-off-sleep = <0>;
+ qcom,supply-post-off-sleep = <0>;
+ };
};
mdss_dsi1: qcom,mdss_dsi@fd922e00 {
diff --git a/arch/arm/boot/dts/msm9625-regulator.dtsi b/arch/arm/boot/dts/msm9625-regulator.dtsi
index ee48b7f..eb56d1c 100644
--- a/arch/arm/boot/dts/msm9625-regulator.dtsi
+++ b/arch/arm/boot/dts/msm9625-regulator.dtsi
@@ -194,6 +194,15 @@
qcom,use-voltage-corner;
status = "okay";
};
+ pm8019_l10_floor_corner: regulator-l10-floor-corner {
+ compatible = "qcom,rpm-regulator-smd";
+ regulator-name = "8019_l10_floor_corner";
+ qcom,set = <3>;
+ regulator-min-microvolt = <1>;
+ regulator-max-microvolt = <7>;
+ qcom,use-voltage-floor-corner;
+ qcom,always-send-voltage;
+ };
};
rpm-regulator-ldoa11 {
diff --git a/arch/arm/boot/dts/msm9625.dtsi b/arch/arm/boot/dts/msm9625.dtsi
index 5520401..59d7ba0 100644
--- a/arch/arm/boot/dts/msm9625.dtsi
+++ b/arch/arm/boot/dts/msm9625.dtsi
@@ -529,10 +529,10 @@
qcom,freq-control-mask = <0x0>;
qcom,vdd-restriction-temp = <5>;
qcom,vdd-restriction-temp-hysteresis = <10>;
- vdd_dig-supply = <&pm8019_l10_corner>;
+ vdd-dig-supply = <&pm8019_l10_floor_corner>;
qcom,vdd-dig-rstr{
- qcom,vdd-rstr-reg = "vdd_dig";
+ qcom,vdd-rstr-reg = "vdd-dig";
qcom,levels = <5 7 7>; /* Nominal, Super Turbo, Super Turbo */
qcom,min-level = <1>; /* No Request */
};
diff --git a/arch/arm/boot/dts/msmkrypton-smp2p.dtsi b/arch/arm/boot/dts/msmkrypton-smp2p.dtsi
new file mode 100644
index 0000000..fcd2880
--- /dev/null
+++ b/arch/arm/boot/dts/msmkrypton-smp2p.dtsi
@@ -0,0 +1,122 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+&soc {
+ qcom,smp2p-modem {
+ compatible = "qcom,smp2p";
+ reg = <0xf9011008 0x4>;
+ qcom,remote-pid = <1>;
+ qcom,irq-bitmask = <0x4000>;
+ interrupts = <0 27 1>;
+ };
+
+ qcom,smp2p-adsp {
+ compatible = "qcom,smp2p";
+ reg = <0xf9011008 0x4>;
+ qcom,remote-pid = <2>;
+ qcom,irq-bitmask = <0x400>;
+ interrupts = <0 158 1>;
+ };
+
+ smp2pgpio_smp2p_7_in: qcom,smp2pgpio-smp2p-7-in {
+ compatible = "qcom,smp2pgpio";
+ qcom,entry-name = "smp2p";
+ qcom,remote-pid = <7>;
+ qcom,is-inbound;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ qcom,smp2pgpio_test_smp2p_7_in {
+ compatible = "qcom,smp2pgpio_test_smp2p_7_in";
+ gpios = <&smp2pgpio_smp2p_7_in 0 0>;
+ };
+
+ smp2pgpio_smp2p_7_out: qcom,smp2pgpio-smp2p-7-out {
+ compatible = "qcom,smp2pgpio";
+ qcom,entry-name = "smp2p";
+ qcom,remote-pid = <7>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ qcom,smp2pgpio_test_smp2p_7_out {
+ compatible = "qcom,smp2pgpio_test_smp2p_7_out";
+ gpios = <&smp2pgpio_smp2p_7_out 0 0>;
+ };
+
+ smp2pgpio_smp2p_1_in: qcom,smp2pgpio-smp2p-1-in {
+ compatible = "qcom,smp2pgpio";
+ qcom,entry-name = "smp2p";
+ qcom,remote-pid = <1>;
+ qcom,is-inbound;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ qcom,smp2pgpio_test_smp2p_1_in {
+ compatible = "qcom,smp2pgpio_test_smp2p_1_in";
+ gpios = <&smp2pgpio_smp2p_1_in 0 0>;
+ };
+
+ smp2pgpio_smp2p_1_out: qcom,smp2pgpio-smp2p-1-out {
+ compatible = "qcom,smp2pgpio";
+ qcom,entry-name = "smp2p";
+ qcom,remote-pid = <1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ qcom,smp2pgpio_test_smp2p_1_out {
+ compatible = "qcom,smp2pgpio_test_smp2p_1_out";
+ gpios = <&smp2pgpio_smp2p_1_out 0 0>;
+ };
+
+ smp2pgpio_smp2p_2_in: qcom,smp2pgpio-smp2p-2-in {
+ compatible = "qcom,smp2pgpio";
+ qcom,entry-name = "smp2p";
+ qcom,remote-pid = <2>;
+ qcom,is-inbound;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ qcom,smp2pgpio_test_smp2p_2_in {
+ compatible = "qcom,smp2pgpio_test_smp2p_2_in";
+ gpios = <&smp2pgpio_smp2p_2_in 0 0>;
+ };
+
+ smp2pgpio_smp2p_2_out: qcom,smp2pgpio-smp2p-2-out {
+ compatible = "qcom,smp2pgpio";
+ qcom,entry-name = "smp2p";
+ qcom,remote-pid = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ qcom,smp2pgpio_test_smp2p_2_out {
+ compatible = "qcom,smp2pgpio_test_smp2p_2_out";
+ gpios = <&smp2pgpio_smp2p_2_out 0 0>;
+ };
+
+};
diff --git a/arch/arm/boot/dts/msmkrypton.dtsi b/arch/arm/boot/dts/msmkrypton.dtsi
index 75930c1..dd5b7a0 100644
--- a/arch/arm/boot/dts/msmkrypton.dtsi
+++ b/arch/arm/boot/dts/msmkrypton.dtsi
@@ -20,6 +20,8 @@
soc: soc { };
};
+/include/ "msmkrypton-smp2p.dtsi"
+
&soc {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/configs/msm8226-perf_defconfig b/arch/arm/configs/msm8226-perf_defconfig
index 5c1f6a5..7615eb2 100644
--- a/arch/arm/configs/msm8226-perf_defconfig
+++ b/arch/arm/configs/msm8226-perf_defconfig
@@ -56,6 +56,7 @@
CONFIG_MSM_PIL_VENUS=y
CONFIG_MSM_PIL_PRONTO=y
CONFIG_MSM_TZ_LOG=y
+CONFIG_MSM_SMCMOD=y
CONFIG_MSM_DIRECT_SCLK_ACCESS=y
CONFIG_MSM_WATCHDOG_V2=y
CONFIG_MSM_MEMORY_DUMP=y
@@ -298,6 +299,7 @@
CONFIG_MSMB_CAMERA=y
CONFIG_OV9724=y
CONFIG_MT9M114=y
+CONFIG_OV5648=y
CONFIG_MSMB_JPEG=y
CONFIG_MSM_VIDC_V4L2=y
CONFIG_MSM_WFD=y
diff --git a/arch/arm/configs/msm8226_defconfig b/arch/arm/configs/msm8226_defconfig
index 7cf2b20..7b2d38b 100644
--- a/arch/arm/configs/msm8226_defconfig
+++ b/arch/arm/configs/msm8226_defconfig
@@ -56,6 +56,7 @@
CONFIG_MSM_PIL_VENUS=y
CONFIG_MSM_PIL_PRONTO=y
CONFIG_MSM_TZ_LOG=y
+CONFIG_MSM_SMCMOD=y
CONFIG_MSM_DIRECT_SCLK_ACCESS=y
CONFIG_MSM_WATCHDOG_V2=y
CONFIG_MSM_MEMORY_DUMP=y
@@ -302,6 +303,7 @@
CONFIG_MSMB_CAMERA=y
CONFIG_OV9724=y
CONFIG_MT9M114=y
+CONFIG_OV5648=y
CONFIG_MSMB_JPEG=y
CONFIG_MSM_VIDC_V4L2=y
CONFIG_MSM_WFD=y
diff --git a/arch/arm/configs/msm8610-perf_defconfig b/arch/arm/configs/msm8610-perf_defconfig
index d7a50a0..0db08db 100644
--- a/arch/arm/configs/msm8610-perf_defconfig
+++ b/arch/arm/configs/msm8610-perf_defconfig
@@ -279,6 +279,7 @@
CONFIG_s5k4e1=y
CONFIG_HI256=y
CONFIG_OV12830=y
+CONFIG_OV5648=y
CONFIG_MSM_CAMERA_SENSOR=y
# CONFIG_MSM_CPP is not set
CONFIG_MSM_CCI=y
diff --git a/arch/arm/configs/msm8610_defconfig b/arch/arm/configs/msm8610_defconfig
index f50c073..2a8bc91 100644
--- a/arch/arm/configs/msm8610_defconfig
+++ b/arch/arm/configs/msm8610_defconfig
@@ -71,6 +71,7 @@
CONFIG_MSM_RTB_SEPARATE_CPUS=y
CONFIG_MSM_ENABLE_WDOG_DEBUG_CONTROL=y
CONFIG_MSM_BOOT_STATS=y
+CONFIG_MSM_XPU_ERR_FATAL=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
@@ -288,6 +289,7 @@
CONFIG_OV9724=y
CONFIG_SP1628=y
CONFIG_GC0339=y
+CONFIG_OV5648=y
CONFIG_MSMB_JPEG=y
CONFIG_MSM_VIDC_V4L2=y
CONFIG_MSM_WFD=y
diff --git a/arch/arm/configs/msmkrypton_defconfig b/arch/arm/configs/msmkrypton_defconfig
index 6609c32..b04acb5 100644
--- a/arch/arm/configs/msmkrypton_defconfig
+++ b/arch/arm/configs/msmkrypton_defconfig
@@ -38,7 +38,12 @@
# CONFIG_MSM_PROC_COMM is not set
CONFIG_MSM_SMD=y
CONFIG_MSM_SMD_PKG4=y
+CONFIG_MSM_SMP2P=y
+CONFIG_MSM_SMP2P_TEST=y
CONFIG_MSM_IPC_LOGGING=y
+CONFIG_MSM_IPC_ROUTER=y
+CONFIG_MSM_IPC_ROUTER_SMD_XPRT=y
+CONFIG_MSM_QMI_INTERFACE=y
CONFIG_MSM_WATCHDOG_V2=y
CONFIG_MSM_UARTDM_Core_v14=y
CONFIG_NO_HZ=y
diff --git a/arch/arm/include/asm/smcmod.h b/arch/arm/include/asm/smcmod.h
index 06918c4..6225c1e 100644
--- a/arch/arm/include/asm/smcmod.h
+++ b/arch/arm/include/asm/smcmod.h
@@ -108,6 +108,45 @@
uint32_t return_val; /* out */
} __packed;
+/**
+ * struct smcmod_decrypt_req - used to decrypt image fragments.
+ * @service_id - requested service.
+ * @command_id - requested command.
+ * @operation - specifies metadata parsing or image fragment decrypting.
+ * @request - describes request parameters depending on operation.
+ * @response - this is the response of the request.
+ */
+struct smcmod_decrypt_req {
+ uint32_t service_id;
+ uint32_t command_id;
+#define SMCMOD_DECRYPT_REQ_OP_METADATA 1
+#define SMCMOD_DECRYPT_REQ_OP_IMG_FRAG 2
+ uint32_t operation;
+ union {
+ struct {
+ uint32_t len;
+ uint32_t ion_fd;
+ } metadata;
+ struct {
+ uint32_t ctx_id;
+ uint32_t last_frag;
+ uint32_t frag_len;
+ uint32_t ion_fd;
+ uint32_t offset;
+ } img_frag;
+ } request;
+ union {
+ struct {
+ uint32_t status;
+ uint32_t ctx_id;
+ uint32_t end_offset;
+ } metadata;
+ struct {
+ uint32_t status;
+ } img_frag;
+ } response;
+};
+
#define SMCMOD_IOC_MAGIC 0x97
/* Number chosen to avoid any conflicts */
@@ -120,4 +159,7 @@
#define SMCMOD_IOCTL_SEND_MSG_DIGEST_CMD \
_IOWR(SMCMOD_IOC_MAGIC, 35, struct smcmod_msg_digest_req)
#define SMCMOD_IOCTL_GET_VERSION _IOWR(SMCMOD_IOC_MAGIC, 36, uint32_t)
+#define SMCMOD_IOCTL_SEND_DECRYPT_CMD \
+ _IOWR(SMCMOD_IOC_MAGIC, 37, struct smcmod_decrypt_req)
+
#endif /* __SMCMOD_H_ */
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index a8eee29..10e580b 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -2173,12 +2173,12 @@
config MSM_SMCMOD
tristate "Secure Monitor Call (SMC) Module"
default n
- depends on (ARCH_FSM9XXX && ION && ION_MSM && MSM_SCM)
+ depends on (ION && ION_MSM && MSM_SCM)
help
Enable support for smcmod driver. This driver provides a mechanism
to execute the Secure Monitor Call (SMC) to switch from non-secure
- to secure execution in the fsm9xxx targets. This module utilizes Ion
- for buffer management.
+ to secure execution in the fsm9xxx and msm8x26 targets. This module
+ utilizes Ion for buffer management.
config MSM_SUBSYSTEM_RESTART
bool "MSM Subsystem Restart"
diff --git a/arch/arm/mach-msm/board-8064-storage.c b/arch/arm/mach-msm/board-8064-storage.c
index dd6c9ec..094765f 100644
--- a/arch/arm/mach-msm/board-8064-storage.c
+++ b/arch/arm/mach-msm/board-8064-storage.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2011-2012, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -21,6 +21,7 @@
#include <mach/msm_bus_board.h>
#include <mach/board.h>
#include <mach/gpiomux.h>
+#include <mach/socinfo.h>
#include "devices.h"
#include "board-8064.h"
#include "board-storage-common-a.h"
@@ -238,6 +239,10 @@
400000, 24000000, 48000000, 96000000
};
+static unsigned int sdc1_sup_clk_rates_all[] = {
+ 400000, 24000000, 48000000, 96000000, 192000000
+};
+
static struct mmc_platform_data sdc1_data = {
.ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
#ifdef CONFIG_MMC_MSM_SDC1_8_BIT_SUPPORT
@@ -331,8 +336,16 @@
void __init apq8064_init_mmc(void)
{
- if (apq8064_sdc1_pdata)
+ if (apq8064_sdc1_pdata) {
+ /* 8064 v2 supports upto 200MHz clock on SDC1 slot */
+ if (SOCINFO_VERSION_MAJOR(socinfo_get_version()) >= 2) {
+ apq8064_sdc1_pdata->sup_clk_table =
+ sdc1_sup_clk_rates_all;
+ apq8064_sdc1_pdata->sup_clk_cnt =
+ ARRAY_SIZE(sdc1_sup_clk_rates_all);
+ }
apq8064_add_sdcc(1, apq8064_sdc1_pdata);
+ }
if (apq8064_sdc2_pdata)
apq8064_add_sdcc(2, apq8064_sdc2_pdata);
diff --git a/arch/arm/mach-msm/board-8226-gpiomux.c b/arch/arm/mach-msm/board-8226-gpiomux.c
index fd831fc..78a73c4 100644
--- a/arch/arm/mach-msm/board-8226-gpiomux.c
+++ b/arch/arm/mach-msm/board-8226-gpiomux.c
@@ -85,12 +85,6 @@
.pull = GPIOMUX_PULL_DOWN,
};
-static struct gpiomux_setting gpio_spi_cs_eth_config = {
- .func = GPIOMUX_FUNC_4,
- .drv = GPIOMUX_DRV_6MA,
- .pull = GPIOMUX_PULL_DOWN,
-};
-
static struct gpiomux_setting wcnss_5wire_suspend_cfg = {
.func = GPIOMUX_FUNC_GPIO,
.drv = GPIOMUX_DRV_2MA,
@@ -205,12 +199,6 @@
[GPIOMUX_SUSPENDED] = &gpio_i2c_config,
},
},
- {
- .gpio = 22, /* BLSP1 QUP1 SPI_CS_ETH */
- .settings = {
- [GPIOMUX_SUSPENDED] = &gpio_spi_cs_eth_config,
- },
- },
{ /* NFC */
.gpio = 10, /* BLSP1 QUP3 I2C_DAT */
.settings = {
@@ -394,6 +382,20 @@
},
},
{
+ .gpio = 22, /* CAM1_VDD */
+ .settings = {
+ [GPIOMUX_ACTIVE] = &cam_settings[3],
+ [GPIOMUX_SUSPENDED] = &cam_settings[4],
+ },
+ },
+ {
+ .gpio = 34, /* CAM1 VCM_PWDN */
+ .settings = {
+ [GPIOMUX_ACTIVE] = &cam_settings[3],
+ [GPIOMUX_SUSPENDED] = &cam_settings[4],
+ },
+ },
+ {
.gpio = 35, /* CAM2_STANDBY_N */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
diff --git a/arch/arm/mach-msm/board-8930-gpiomux.c b/arch/arm/mach-msm/board-8930-gpiomux.c
index 4298d96..62e8122 100644
--- a/arch/arm/mach-msm/board-8930-gpiomux.c
+++ b/arch/arm/mach-msm/board-8930-gpiomux.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2011-2012, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -726,6 +726,96 @@
}
};
+#ifdef CONFIG_MMC_MSM_SDC2_SUPPORT
+static struct gpiomux_setting sdcc2_clk_actv_cfg = {
+ .func = GPIOMUX_FUNC_2,
+ .drv = GPIOMUX_DRV_8MA,
+ .pull = GPIOMUX_PULL_NONE,
+};
+
+static struct gpiomux_setting sdcc2_cmd_data_0_3_actv_cfg = {
+ .func = GPIOMUX_FUNC_2,
+ .drv = GPIOMUX_DRV_8MA,
+ .pull = GPIOMUX_PULL_UP,
+};
+
+static struct gpiomux_setting sdcc2_suspend_cfg = {
+ .func = GPIOMUX_FUNC_GPIO,
+ .drv = GPIOMUX_DRV_2MA,
+ .pull = GPIOMUX_PULL_DOWN,
+};
+
+static struct gpiomux_setting sdcc2_data_1_suspend_cfg = {
+ .func = GPIOMUX_FUNC_GPIO,
+ .drv = GPIOMUX_DRV_8MA,
+ .pull = GPIOMUX_PULL_UP,
+};
+
+/**
+ * DAT_0 to DAT_3 lines (gpio 89 - 92) are shared with ethernet
+ * CMD line (gpio 97) is shared with USB
+ * CLK line (gpio 98) is shared with battery alarm in
+ */
+static struct msm_gpiomux_config msm8960_sdcc2_configs[] __initdata = {
+ {
+ /* DATA_3 */
+ .gpio = 92,
+ .settings = {
+ [GPIOMUX_ACTIVE] = &sdcc2_cmd_data_0_3_actv_cfg,
+ [GPIOMUX_SUSPENDED] = &sdcc2_suspend_cfg,
+ },
+ },
+ {
+ /* DATA_2 */
+ .gpio = 91,
+ .settings = {
+ [GPIOMUX_ACTIVE] = &sdcc2_cmd_data_0_3_actv_cfg,
+ [GPIOMUX_SUSPENDED] = &sdcc2_suspend_cfg,
+ },
+ },
+ {
+ /* DATA_1 */
+ .gpio = 90,
+ .settings = {
+ [GPIOMUX_ACTIVE] = &sdcc2_cmd_data_0_3_actv_cfg,
+ [GPIOMUX_SUSPENDED] = &sdcc2_data_1_suspend_cfg,
+ },
+ },
+ {
+ /* DATA_0 */
+ .gpio = 89,
+ .settings = {
+ [GPIOMUX_ACTIVE] = &sdcc2_cmd_data_0_3_actv_cfg,
+ [GPIOMUX_SUSPENDED] = &sdcc2_suspend_cfg,
+ },
+ },
+ {
+ /* CMD */
+ .gpio = 97,
+ .settings = {
+ [GPIOMUX_ACTIVE] = &sdcc2_cmd_data_0_3_actv_cfg,
+ [GPIOMUX_SUSPENDED] = &sdcc2_suspend_cfg,
+ },
+ },
+ {
+ /* CLK */
+ .gpio = 98,
+ .settings = {
+ [GPIOMUX_ACTIVE] = &sdcc2_clk_actv_cfg,
+ [GPIOMUX_SUSPENDED] = &sdcc2_suspend_cfg,
+ },
+ },
+};
+
+static void msm_gpiomux_sdc2_install(void)
+{
+ msm_gpiomux_install(msm8960_sdcc2_configs,
+ ARRAY_SIZE(msm8960_sdcc2_configs));
+}
+#else
+static void msm_gpiomux_sdc2_install(void) {}
+#endif /* CONFIG_MMC_MSM_SDC2_SUPPORT */
+
int __init msm8930_init_gpiomux(void)
{
int rc = msm_gpiomux_init(NR_GPIO_IRQS);
@@ -802,5 +892,7 @@
msm_gpiomux_install(msm_sitar_config, ARRAY_SIZE(msm_sitar_config));
+ msm_gpiomux_sdc2_install();
+
return 0;
}
diff --git a/arch/arm/mach-msm/board-8930-regulator-pm8038.c b/arch/arm/mach-msm/board-8930-regulator-pm8038.c
index 8ed93ea..8e04003 100644
--- a/arch/arm/mach-msm/board-8930-regulator-pm8038.c
+++ b/arch/arm/mach-msm/board-8930-regulator-pm8038.c
@@ -99,6 +99,7 @@
REGULATOR_SUPPLY("mhl_iovcc18", "0-0039"),
REGULATOR_SUPPLY("vdd-io", "spi0.0"),
REGULATOR_SUPPLY("vdd-phy", "spi0.0"),
+ REGULATOR_SUPPLY("sdc_vdd", "msm_sdcc.2"),
};
VREG_CONSUMERS(L12) = {
REGULATOR_SUPPLY("8038_l12", NULL),
diff --git a/arch/arm/mach-msm/board-8930-regulator-pm8917.c b/arch/arm/mach-msm/board-8930-regulator-pm8917.c
index cdc419f..e63fbdd 100644
--- a/arch/arm/mach-msm/board-8930-regulator-pm8917.c
+++ b/arch/arm/mach-msm/board-8930-regulator-pm8917.c
@@ -81,6 +81,7 @@
REGULATOR_SUPPLY("cam_vana", "4-006c"),
REGULATOR_SUPPLY("cam_vana", "4-0048"),
REGULATOR_SUPPLY("cam_vana", "4-0020"),
+ REGULATOR_SUPPLY("sdc_vdd", "msm_sdcc.2"),
};
VREG_CONSUMERS(L12) = {
REGULATOR_SUPPLY("8917_l12", NULL),
diff --git a/arch/arm/mach-msm/board-8930-storage.c b/arch/arm/mach-msm/board-8930-storage.c
index d045040..fec87ae 100644
--- a/arch/arm/mach-msm/board-8930-storage.c
+++ b/arch/arm/mach-msm/board-8930-storage.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2011-2012, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -49,6 +49,13 @@
.lpm_uA = 9000,
.hpm_uA = 200000, /* 200mA */
},
+ /* SDCC2 : SDIO slot connected */
+ [SDCC2] = {
+ .name = "sdc_vdd",
+ .high_vol_level = 1800000,
+ .low_vol_level = 1800000,
+ .hpm_uA = 200000, /* 200mA */
+ },
/* SDCC3 : External card slot connected */
[SDCC3] = {
.name = "sdc_vdd",
@@ -94,7 +101,7 @@
* during sleep.
*/
.lpm_uA = 2000,
- }
+ },
};
static struct msm_mmc_slot_reg_data mmc_slot_vreg_data[MAX_SDCC_CONTROLLER] = {
@@ -103,6 +110,10 @@
.vdd_data = &mmc_vdd_reg_data[SDCC1],
.vdd_io_data = &mmc_vdd_io_reg_data[SDCC1],
},
+ /* SDCC2 : SDIO card slot connected */
+ [SDCC2] = {
+ .vdd_data = &mmc_vdd_reg_data[SDCC2],
+ },
/* SDCC3 : External card slot connected */
[SDCC3] = {
.vdd_data = &mmc_vdd_reg_data[SDCC3],
@@ -170,6 +181,15 @@
{TLMM_PULL_SDC3_DATA, GPIO_CFG_PULL_UP}
};
+static struct msm_mmc_gpio sdc2_gpio[] = {
+ {92, "sdc2_dat_3"},
+ {91, "sdc2_dat_2"},
+ {90, "sdc2_dat_1"},
+ {89, "sdc2_dat_0"},
+ {97, "sdc2_cmd"},
+ {98, "sdc2_clk"}
+};
+
static struct msm_mmc_pad_pull_data mmc_pad_pull_data[MAX_SDCC_CONTROLLER] = {
[SDCC1] = {
.on = sdc1_pad_pull_on_cfg,
@@ -207,10 +227,21 @@
},
};
+static struct msm_mmc_gpio_data mmc_gpio_data[MAX_SDCC_CONTROLLER] = {
+ [SDCC2] = {
+ .gpio = sdc2_gpio,
+ .size = ARRAY_SIZE(sdc2_gpio),
+ },
+};
+
static struct msm_mmc_pin_data mmc_slot_pin_data[MAX_SDCC_CONTROLLER] = {
[SDCC1] = {
.pad_data = &mmc_pad_data[SDCC1],
},
+ [SDCC2] = {
+ .is_gpio = true,
+ .gpio_data = &mmc_gpio_data[SDCC2],
+ },
[SDCC3] = {
.pad_data = &mmc_pad_data[SDCC3],
},
@@ -248,6 +279,23 @@
};
#endif
+#ifdef CONFIG_MMC_MSM_SDC2_SUPPORT
+static unsigned int sdc2_sup_clk_rates[] = {
+ 400000, 24000000, 48000000
+};
+
+static struct mmc_platform_data msm8960_sdc2_data = {
+ .ocr_mask = MMC_VDD_165_195 | MMC_VDD_27_28 | MMC_VDD_28_29,
+ .mmc_bus_width = MMC_CAP_4_BIT_DATA,
+ .sup_clk_table = sdc2_sup_clk_rates,
+ .sup_clk_cnt = ARRAY_SIZE(sdc2_sup_clk_rates),
+ .vreg_data = &mmc_slot_vreg_data[SDCC2],
+ .pin_data = &mmc_slot_pin_data[SDCC2],
+ .sdiowakeup_irq = MSM_GPIO_TO_INT(90),
+ .msm_bus_voting_data = &sps_to_ddr_bus_voting_data,
+};
+#endif
+
#ifdef CONFIG_MMC_MSM_SDC3_SUPPORT
static struct mmc_platform_data msm8960_sdc3_data = {
.ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
@@ -300,6 +348,10 @@
/* SDC1 : eMMC card connected */
msm_add_sdcc(1, &msm8960_sdc1_data);
#endif
+#ifdef CONFIG_MMC_MSM_SDC2_SUPPORT
+ /* SDC2: SDIO slot for WLAN */
+ msm_add_sdcc(2, &msm8960_sdc2_data);
+#endif
#ifdef CONFIG_MMC_MSM_SDC3_SUPPORT
/*
* All 8930 platform boards using the 1.2 SoC have been reworked so that
diff --git a/arch/arm/mach-msm/clock-8960.c b/arch/arm/mach-msm/clock-8960.c
index 1514bba..0677525 100644
--- a/arch/arm/mach-msm/clock-8960.c
+++ b/arch/arm/mach-msm/clock-8960.c
@@ -1547,7 +1547,7 @@
F_END
};
-static CLK_SDC(sdc1_clk, 1, 6, 52000000, 104000000);
+static CLK_SDC(sdc1_clk, 1, 6, 52000000, 208000000);
static CLK_SDC(sdc2_clk, 2, 5, 52000000, 104000000);
static CLK_SDC(sdc3_clk, 3, 4, 104000000, 208000000);
static CLK_SDC(sdc4_clk, 4, 3, 33000000, 67000000);
diff --git a/arch/arm/mach-msm/cpr-regulator.c b/arch/arm/mach-msm/cpr-regulator.c
index a2936c2..60a62ec 100644
--- a/arch/arm/mach-msm/cpr-regulator.c
+++ b/arch/arm/mach-msm/cpr-regulator.c
@@ -125,6 +125,8 @@
#define CPR_FUSE_RO_SEL_BITS 3
#define CPR_FUSE_RO_SEL_BITS_MASK ((1<<CPR_FUSE_RO_SEL_BITS)-1)
+#define CPR_FUSE_MIN_QUOT_DIFF 100
+
#define BYTES_PER_FUSE_ROW 8
enum voltage_change_dir {
@@ -200,16 +202,26 @@
u32 vdd_apc_step_down_limit;
};
-static int cpr_debug_enable;
+#define CPR_DEBUG_MASK_IRQ BIT(0)
+#define CPR_DEBUG_MASK_API BIT(1)
+
+static int cpr_debug_enable = CPR_DEBUG_MASK_IRQ;
static int cpr_enable;
static struct cpr_regulator *the_cpr;
module_param_named(debug_enable, cpr_debug_enable, int, S_IRUGO | S_IWUSR);
#define cpr_debug(message, ...) \
do { \
- if (cpr_debug_enable) \
+ if (cpr_debug_enable & CPR_DEBUG_MASK_API) \
pr_info(message, ##__VA_ARGS__); \
} while (0)
+#define cpr_debug_irq(message, ...) \
+ do { \
+ if (cpr_debug_enable & CPR_DEBUG_MASK_IRQ) \
+ pr_info(message, ##__VA_ARGS__); \
+ else \
+ pr_debug(message, ##__VA_ARGS__); \
+ } while (0)
static bool cpr_is_allowed(struct cpr_regulator *cpr_vreg)
{
@@ -267,11 +279,12 @@
cpr_masked_write(cpr_vreg, REG_RBCPR_CTL, mask, value);
}
-static void cpr_ctl_enable(struct cpr_regulator *cpr_vreg)
+static void cpr_ctl_enable(struct cpr_regulator *cpr_vreg, int corner)
{
u32 val;
- if (cpr_is_allowed(cpr_vreg))
+ if (cpr_is_allowed(cpr_vreg) &&
+ (cpr_vreg->ceiling_volt[corner] > cpr_vreg->floor_volt[corner]))
val = RBCPR_CTL_LOOP_EN;
else
val = 0;
@@ -369,7 +382,7 @@
cpr_ctl_disable(the_cpr);
cpr_irq_clr(the_cpr);
cpr_corner_restore(the_cpr, the_cpr->corner);
- cpr_ctl_enable(the_cpr);
+ cpr_ctl_enable(the_cpr, the_cpr->corner);
} else {
cpr_ctl_disable(the_cpr);
cpr_irq_set(the_cpr, 0);
@@ -485,16 +498,16 @@
& RBCPR_RESULT0_ERROR_STEPS_MASK;
last_volt = cpr_vreg->last_volt[corner];
- cpr_debug("last_volt[corner:%d] = %d uV\n", corner, last_volt);
+ cpr_debug_irq("last_volt[corner:%d] = %d uV\n", corner, last_volt);
if (dir == UP) {
- cpr_debug("Up: cpr status = 0x%08x (error_steps=%d)\n",
- reg_val, error_steps);
+ cpr_debug_irq("Up: cpr status = 0x%08x (error_steps=%d)\n",
+ reg_val, error_steps);
if (last_volt >= cpr_vreg->ceiling_volt[corner]) {
- cpr_debug("[corn:%d] @ ceiling: %d >= %d: NACK\n",
- corner, last_volt,
- cpr_vreg->ceiling_volt[corner]);
+ cpr_debug_irq("[corn:%d] @ ceiling: %d >= %d: NACK\n",
+ corner, last_volt,
+ cpr_vreg->ceiling_volt[corner]);
cpr_irq_clr_nack(cpr_vreg);
/* Maximize the UP threshold */
@@ -506,17 +519,18 @@
}
if (error_steps > cpr_vreg->vdd_apc_step_up_limit) {
- cpr_debug("%d is over up-limit(%d): Clamp\n",
- error_steps,
- cpr_vreg->vdd_apc_step_up_limit);
+ cpr_debug_irq("%d is over up-limit(%d): Clamp\n",
+ error_steps,
+ cpr_vreg->vdd_apc_step_up_limit);
error_steps = cpr_vreg->vdd_apc_step_up_limit;
}
/* Calculate new voltage */
new_volt = last_volt + (error_steps * cpr_vreg->step_volt);
if (new_volt > cpr_vreg->ceiling_volt[corner]) {
- cpr_debug("new_volt(%d) >= ceiling_volt(%d): Clamp\n",
- new_volt, cpr_vreg->ceiling_volt[corner]);
+ cpr_debug_irq("new_volt(%d) >= ceiling(%d): Clamp\n",
+ new_volt,
+ cpr_vreg->ceiling_volt[corner]);
new_volt = cpr_vreg->ceiling_volt[corner];
}
@@ -542,15 +556,16 @@
/* Ack */
cpr_irq_clr_ack(cpr_vreg);
- cpr_debug("UP: -> new_volt = %d uV\n", new_volt);
+ cpr_debug_irq("UP: -> new_volt[corner:%d] = %d uV\n",
+ corner, new_volt);
} else if (dir == DOWN) {
- cpr_debug("Down: cpr status = 0x%08x (error_steps=%d)\n",
- reg_val, error_steps);
+ cpr_debug_irq("Down: cpr status = 0x%08x (error_steps=%d)\n",
+ reg_val, error_steps);
if (last_volt <= cpr_vreg->floor_volt[corner]) {
- cpr_debug("[corn:%d] @ floor: %d <= %d: NACK\n",
- corner, last_volt,
- cpr_vreg->floor_volt[corner]);
+ cpr_debug_irq("[corn:%d] @ floor: %d <= %d: NACK\n",
+ corner, last_volt,
+ cpr_vreg->floor_volt[corner]);
cpr_irq_clr_nack(cpr_vreg);
/* Maximize the DOWN threshold */
@@ -571,17 +586,18 @@
}
if (error_steps > cpr_vreg->vdd_apc_step_down_limit) {
- cpr_debug("%d is over down-limit(%d): Clamp\n",
- error_steps,
- cpr_vreg->vdd_apc_step_down_limit);
+ cpr_debug_irq("%d is over down-limit(%d): Clamp\n",
+ error_steps,
+ cpr_vreg->vdd_apc_step_down_limit);
error_steps = cpr_vreg->vdd_apc_step_down_limit;
}
/* Calculte new voltage */
new_volt = last_volt - (error_steps * cpr_vreg->step_volt);
if (new_volt < cpr_vreg->floor_volt[corner]) {
- cpr_debug("new_volt(%d) < floor_volt(%d): Clamp\n",
- new_volt, cpr_vreg->floor_volt[corner]);
+ cpr_debug_irq("new_volt(%d) < floor(%d): Clamp\n",
+ new_volt,
+ cpr_vreg->floor_volt[corner]);
new_volt = cpr_vreg->floor_volt[corner];
}
@@ -601,7 +617,8 @@
/* Ack */
cpr_irq_clr_ack(cpr_vreg);
- cpr_debug("DOWN: -> new_volt = %d uV\n", new_volt);
+ cpr_debug_irq("DOWN: -> new_volt[corner:%d] = %d uV\n",
+ corner, new_volt);
}
}
@@ -613,7 +630,7 @@
mutex_lock(&cpr_vreg->cpr_mutex);
reg_val = cpr_read(cpr_vreg, REG_RBIF_IRQ_STATUS);
- cpr_debug("IRQ_STATUS = 0x%02X\n", reg_val);
+ cpr_debug_irq("IRQ_STATUS = 0x%02X\n", reg_val);
if (!cpr_is_allowed(cpr_vreg)) {
reg_val = cpr_read(cpr_vreg, REG_RBCPR_CTL);
@@ -632,7 +649,7 @@
cpr_irq_clr_nack(cpr_vreg);
} else if (reg_val & CPR_INT_MID) {
/* RBCPR_CTL_SW_AUTO_CONT_ACK_EN is enabled */
- cpr_debug("IRQ occured for Mid Flag\n");
+ cpr_debug_irq("IRQ occured for Mid Flag\n");
} else {
pr_err("IRQ occured for unknown flag (0x%08x)\n", reg_val);
}
@@ -678,7 +695,7 @@
if (cpr_is_allowed(cpr_vreg) && cpr_vreg->corner) {
cpr_irq_clr(cpr_vreg);
cpr_corner_switch(cpr_vreg, cpr_vreg->corner);
- cpr_ctl_enable(cpr_vreg);
+ cpr_ctl_enable(cpr_vreg, cpr_vreg->corner);
}
mutex_unlock(&cpr_vreg->cpr_mutex);
@@ -744,7 +761,7 @@
if (cpr_is_allowed(cpr_vreg) && cpr_vreg->vreg_enabled) {
cpr_irq_clr(cpr_vreg);
cpr_corner_switch(cpr_vreg, corner);
- cpr_ctl_enable(cpr_vreg);
+ cpr_ctl_enable(cpr_vreg, corner);
}
cpr_vreg->corner = corner;
@@ -793,7 +810,7 @@
cpr_irq_clr(cpr_vreg);
enable_irq(cpr_vreg->cpr_irq);
- cpr_ctl_enable(cpr_vreg);
+ cpr_ctl_enable(cpr_vreg, cpr_vreg->corner);
return 0;
}
@@ -1194,6 +1211,29 @@
if (!cpr_vreg->cpr_fuse_bits) {
cpr_vreg->cpr_fuse_disable = 1;
pr_err("cpr_fuse_bits = 0: set cpr_fuse_disable = 1\n");
+ } else {
+ /* Check if the target quotients are too close together */
+ int *quot = cpr_vreg->cpr_fuse_target_quot;
+ bool valid_fuse = true;
+
+ if ((quot[CPR_CORNER_TURBO] > quot[CPR_CORNER_NORMAL]) &&
+ (quot[CPR_CORNER_NORMAL] > quot[CPR_CORNER_SVS])) {
+ if ((quot[CPR_CORNER_TURBO] -
+ quot[CPR_CORNER_NORMAL])
+ <= CPR_FUSE_MIN_QUOT_DIFF)
+ valid_fuse = false;
+ else if ((quot[CPR_CORNER_NORMAL] -
+ quot[CPR_CORNER_SVS])
+ <= CPR_FUSE_MIN_QUOT_DIFF)
+ valid_fuse = false;
+ } else {
+ valid_fuse = false;
+ }
+
+ if (!valid_fuse) {
+ cpr_vreg->cpr_fuse_disable = 1;
+ pr_err("invalid quotient values\n");
+ }
}
return 0;
diff --git a/arch/arm/mach-msm/include/mach/sps.h b/arch/arm/mach-msm/include/mach/sps.h
index 3332701..6cd4a2e 100644
--- a/arch/arm/mach-msm/include/mach/sps.h
+++ b/arch/arm/mach-msm/include/mach/sps.h
@@ -17,6 +17,34 @@
#include <linux/types.h> /* u32 */
+#ifdef CONFIG_ARM_LPAE
+
+/* Returns upper 4bits of 36bits physical address */
+#define SPS_GET_UPPER_ADDR(addr) ((addr & 0xF00000000ULL) >> 32)
+
+/* Returns 36bits physical address from 32bit address &
+ * flags word */
+#define DESC_FULL_ADDR(flags, addr) (((flags & 0xF) << 32) | addr)
+
+/* Returns flags word with flags and 4bit upper address
+ * from flags and 36bit physical address */
+#define DESC_FLAG_WORD(flags, addr) (((addr & 0xF00000000ULL) >> 32) | flags)
+
+#else
+
+#define SPS_GET_UPPER_ADDR(addr) (0)
+#define DESC_FULL_ADDR(flags, addr) (addr)
+#define DESC_FLAG_WORD(flags, addr) (flags)
+
+#endif
+
+/* Returns upper 4bits of 36bits physical address from
+ * flags word */
+#define DESC_UPPER_ADDR(flags) ((flags & 0xF))
+
+/* Returns lower 32bits of 36bits physical address */
+#define SPS_GET_LOWER_ADDR(addr) ((u32)(addr & 0xFFFFFFFF))
+
/* SPS device handle indicating use of system memory */
#define SPS_DEV_HANDLE_MEM ((u32)0x7ffffffful)
@@ -56,8 +84,8 @@
#define SPS_IOVEC_FLAG_LOCK 0x0400 /* pipe lock */
#define SPS_IOVEC_FLAG_UNLOCK 0x0200 /* pipe unlock */
#define SPS_IOVEC_FLAG_IMME 0x0100 /* immediate command descriptor */
-#define SPS_IOVEC_FLAG_NO_SUBMIT 0x0002 /* Do not submit descriptor to HW */
-#define SPS_IOVEC_FLAG_DEFAULT 0x0001 /* Use driver default */
+#define SPS_IOVEC_FLAG_NO_SUBMIT 0x0020 /* Do not submit descriptor to HW */
+#define SPS_IOVEC_FLAG_DEFAULT 0x0010 /* Use driver default */
/* Maximum descriptor/iovec size */
#define SPS_IOVEC_MAX_SIZE (32 * 1024 - 1) /* 32K-1 bytes due to HW limit */
@@ -79,6 +107,9 @@
#define SPS_BAM_NO_EXT_P_RST (1UL << 4)
/* Don't enable local clock gating */
#define SPS_BAM_NO_LOCAL_CLK_GATING (1UL << 5)
+/* Don't enable writeback cancel*/
+#define SPS_BAM_CANCEL_WB (1UL << 6)
+
/* BAM device management flags */
@@ -137,6 +168,8 @@
SPS_O_OUT_OF_DESC = 0x00000008,/* Out of descriptors */
SPS_O_ERROR = 0x00000010, /* Error */
SPS_O_EOT = 0x00000020, /* End-of-transfer */
+ SPS_O_RST_ERROR = 0x00000040, /* Pipe reset unsucessful error */
+ SPS_O_HRESP_ERROR = 0x00000080,/* Errorneous Hresponse by AHB MASTER */
/* Options to enable hardware features */
SPS_O_STREAMING = 0x00010000, /* Enable streaming mode (no EOT) */
@@ -200,6 +233,8 @@
SPS_EVENT_FLOWOFF, /* Graceful halt (idle) */
SPS_EVENT_INACTIVE, /* Inactivity timeout */
SPS_EVENT_ERROR, /* Error */
+ SPS_EVENT_RST_ERROR, /* Pipe Reset unsuccessful */
+ SPS_EVENT_HRESP_ERROR, /* Errorneous Hresponse by AHB Master*/
SPS_EVENT_MAX,
};
@@ -429,7 +464,7 @@
*/
struct sps_mem_buffer {
void *base;
- u32 phys_base;
+ phys_addr_t phys_base;
u32 size;
u32 min_size;
};
@@ -646,7 +681,7 @@
*
*/
struct sps_transfer {
- u32 iovec_phys;
+ phys_addr_t iovec_phys;
struct sps_iovec *iovec;
u32 iovec_count;
void *user;
@@ -938,7 +973,7 @@
* @return 0 on success, negative value on error
*
*/
-int sps_transfer_one(struct sps_pipe *h, u32 addr, u32 size,
+int sps_transfer_one(struct sps_pipe *h, phys_addr_t addr, u32 size,
void *user, u32 flags);
/**
@@ -1335,8 +1370,8 @@
return -EPERM;
}
-static inline int sps_transfer_one(struct sps_pipe *h, u32 addr, u32 size,
- void *user, u32 flags)
+static inline int sps_transfer_one(struct sps_pipe *h, phys_addr_t addr,
+ u32 size, void *user, u32 flags)
{
return -EPERM;
}
diff --git a/arch/arm/mach-msm/memory.c b/arch/arm/mach-msm/memory.c
index 2ce4fa0..a974018 100644
--- a/arch/arm/mach-msm/memory.c
+++ b/arch/arm/mach-msm/memory.c
@@ -308,6 +308,8 @@
unsigned long memory_reserve_prop_length;
unsigned int memory_size;
unsigned int memory_start;
+ unsigned int num_holes = 0;
+ int i;
int ret;
memory_name_prop = of_get_flat_dt_prop(node,
@@ -358,21 +360,27 @@
mem_remove:
if (memory_remove_prop) {
- if (memory_remove_prop_length != (2*sizeof(unsigned int))) {
+ if (!memory_remove_prop_length || (memory_remove_prop_length %
+ (2 * sizeof(unsigned int)) != 0)) {
WARN(1, "Memory remove malformed\n");
goto mem_reserve;
}
- memory_start = be32_to_cpu(memory_remove_prop[0]);
- memory_size = be32_to_cpu(memory_remove_prop[1]);
+ num_holes = memory_remove_prop_length /
+ (2 * sizeof(unsigned int));
- ret = memblock_remove(memory_start, memory_size);
- if (ret)
- WARN(1, "Failed to remove memory %x-%x\n",
+ for (i = 0; i < (num_holes * 2); i += 2) {
+ memory_start = be32_to_cpu(memory_remove_prop[i]);
+ memory_size = be32_to_cpu(memory_remove_prop[i+1]);
+
+ ret = memblock_remove(memory_start, memory_size);
+ if (ret)
+ WARN(1, "Failed to remove memory %x-%x\n",
memory_start, memory_start+memory_size);
- else
- pr_info("Node %s removed memory %x-%x\n", uname,
+ else
+ pr_info("Node %s removed memory %x-%x\n", uname,
memory_start, memory_start+memory_size);
+ }
}
mem_reserve:
@@ -428,6 +436,8 @@
unsigned long memory_remove_prop_length;
unsigned long hole_start;
unsigned long hole_size;
+ unsigned int num_holes = 0;
+ int i = 0;
memory_remove_prop = of_get_flat_dt_prop(node,
"qcom,memblock-remove",
@@ -441,15 +451,21 @@
}
if (memory_remove_prop) {
- if (memory_remove_prop_length != (2*sizeof(unsigned int))) {
+ if (!memory_remove_prop_length || (memory_remove_prop_length %
+ (2 * sizeof(unsigned int)) != 0)) {
WARN(1, "Memory remove malformed\n");
goto out;
}
- hole_start = be32_to_cpu(memory_remove_prop[0]);
- hole_size = be32_to_cpu(memory_remove_prop[1]);
+ num_holes = memory_remove_prop_length /
+ (2 * sizeof(unsigned int));
- adjust_meminfo(hole_start, hole_size);
+ for (i = 0; i < (num_holes * 2); i += 2) {
+ hole_start = be32_to_cpu(memory_remove_prop[i]);
+ hole_size = be32_to_cpu(memory_remove_prop[i+1]);
+
+ adjust_meminfo(hole_start, hole_size);
+ }
}
out:
diff --git a/arch/arm/mach-msm/peripheral-loader.c b/arch/arm/mach-msm/peripheral-loader.c
index ff1fd4f..4adbdc0 100644
--- a/arch/arm/mach-msm/peripheral-loader.c
+++ b/arch/arm/mach-msm/peripheral-loader.c
@@ -30,6 +30,7 @@
#include <linux/list_sort.h>
#include <linux/idr.h>
#include <linux/interrupt.h>
+#include <linux/of_gpio.h>
#include <asm/uaccess.h>
#include <asm/setup.h>
@@ -251,6 +252,7 @@
struct pil_desc *desc = dev_id;
struct pil_priv *priv = desc->priv;
+ pil_info(desc, "Power/Clock ready interrupt received\n");
if (!desc->priv->unvoted_flag) {
desc->priv->unvoted_flag = 1;
__pil_proxy_unvote(priv);
@@ -586,6 +588,34 @@
return ret;
}
+static void pil_parse_devicetree(struct pil_desc *desc)
+{
+ int clk_ready = 0;
+
+ if (of_find_property(desc->dev->of_node,
+ "qcom,gpio-proxy-unvote",
+ NULL)) {
+ clk_ready = of_get_named_gpio(desc->dev->of_node,
+ "qcom,gpio-proxy-unvote", 0);
+
+ if (clk_ready < 0) {
+ dev_err(desc->dev,
+ "[%s]: Error getting proxy unvoting gpio\n",
+ desc->name);
+ return;
+ }
+
+ clk_ready = gpio_to_irq(clk_ready);
+ if (clk_ready < 0) {
+ dev_err(desc->dev,
+ "[%s]: Error getting proxy unvote IRQ\n",
+ desc->name);
+ return;
+ }
+ }
+ desc->proxy_unvote_irq = clk_ready;
+}
+
/* Synchronize request_firmware() with suspend */
static DECLARE_RWSEM(pil_pm_rwsem);
@@ -741,12 +771,6 @@
void __iomem *addr;
char buf[sizeof(priv->info->name)];
- /* Ignore users who don't make any sense */
- WARN(desc->ops->proxy_unvote && desc->proxy_unvote_irq == 0
- && !desc->proxy_timeout,
- "Invalid proxy unvote callback or a proxy timeout of 0"
- " was specified or no proxy unvote IRQ was specified.\n");
-
if (WARN(desc->ops->proxy_unvote && !desc->ops->proxy_vote,
"Invalid proxy voting. Ignoring\n"))
((struct pil_reset_ops *)desc->ops)->proxy_unvote = NULL;
@@ -767,7 +791,15 @@
strncpy(buf, desc->name, sizeof(buf));
__iowrite32_copy(priv->info->name, buf, sizeof(buf) / 4);
- if (desc->proxy_unvote_irq > 0) {
+ pil_parse_devicetree(desc);
+
+ /* Ignore users who don't make any sense */
+ WARN(desc->ops->proxy_unvote && desc->proxy_unvote_irq == 0
+ && !desc->proxy_timeout,
+ "Invalid proxy unvote callback or a proxy timeout of 0"
+ " was specified or no proxy unvote IRQ was specified.\n");
+
+ if (desc->proxy_unvote_irq > 0 && desc->ops->proxy_unvote) {
ret = request_threaded_irq(desc->proxy_unvote_irq,
NULL,
proxy_unvote_intr_handler,
diff --git a/arch/arm/mach-msm/pil-pronto.c b/arch/arm/mach-msm/pil-pronto.c
index 4b14efb..620ab5c 100644
--- a/arch/arm/mach-msm/pil-pronto.c
+++ b/arch/arm/mach-msm/pil-pronto.c
@@ -411,15 +411,6 @@
int ret;
uint32_t regval;
- int clk_ready = of_get_named_gpio(pdev->dev.of_node,
- "qcom,gpio-proxy-unvote", 0);
- if (clk_ready < 0)
- return clk_ready;
-
- clk_ready = gpio_to_irq(clk_ready);
- if (clk_ready < 0)
- return clk_ready;
-
drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL);
if (!drv)
return -ENOMEM;
@@ -449,7 +440,6 @@
desc->dev = &pdev->dev;
desc->owner = THIS_MODULE;
desc->proxy_timeout = 10000;
- desc->proxy_unvote_irq = clk_ready;
if (pas_supported(PAS_WCNSS) > 0) {
desc->ops = &pil_pronto_ops_trusted;
diff --git a/arch/arm/mach-msm/pil-q6v5-lpass.c b/arch/arm/mach-msm/pil-q6v5-lpass.c
index f8e1759..a9a6942 100644
--- a/arch/arm/mach-msm/pil-q6v5-lpass.c
+++ b/arch/arm/mach-msm/pil-q6v5-lpass.c
@@ -403,18 +403,13 @@
struct q6v5_data *q6;
struct pil_desc *desc;
struct resource *res;
- int ret, gpio_clk_ready;
+ int ret;
drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL);
if (!drv)
return -ENOMEM;
platform_set_drvdata(pdev, drv);
- ret = gpio_to_irq(of_get_named_gpio(pdev->dev.of_node,
- "qcom,gpio-proxy-unvote", 0));
- if (ret < 0)
- return ret;
- gpio_clk_ready = ret;
q6 = pil_q6v5_init(pdev);
if (IS_ERR(q6))
return PTR_ERR(q6);
@@ -423,7 +418,6 @@
desc = &q6->desc;
desc->owner = THIS_MODULE;
desc->proxy_timeout = PROXY_TIMEOUT_MS;
- desc->proxy_unvote_irq = gpio_clk_ready;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "restart_reg");
q6->restart_reg = devm_request_and_ioremap(&pdev->dev, res);
diff --git a/arch/arm/mach-msm/pil-q6v5-mss.c b/arch/arm/mach-msm/pil-q6v5-mss.c
index 5833db9..56047ff 100644
--- a/arch/arm/mach-msm/pil-q6v5-mss.c
+++ b/arch/arm/mach-msm/pil-q6v5-mss.c
@@ -298,15 +298,6 @@
struct property *prop;
int ret;
- int clk_ready = of_get_named_gpio(pdev->dev.of_node,
- "qcom,gpio-proxy-unvote", 0);
- if (clk_ready < 0)
- return clk_ready;
-
- clk_ready = gpio_to_irq(clk_ready);
- if (clk_ready < 0)
- return clk_ready;
-
mba = devm_kzalloc(&pdev->dev, sizeof(*mba), GFP_KERNEL);
if (IS_ERR(mba))
return PTR_ERR(mba);
@@ -322,7 +313,6 @@
q6_desc->ops = &pil_msa_pbl_ops;
q6_desc->owner = THIS_MODULE;
q6_desc->proxy_timeout = PROXY_TIMEOUT_MS;
- q6_desc->proxy_unvote_irq = clk_ready;
q6->self_auth = of_property_read_bool(pdev->dev.of_node,
"qcom,pil-self-auth");
diff --git a/arch/arm/mach-msm/smcmod.c b/arch/arm/mach-msm/smcmod.c
index 221a522..683fb32 100644
--- a/arch/arm/mach-msm/smcmod.c
+++ b/arch/arm/mach-msm/smcmod.c
@@ -29,6 +29,7 @@
#include <linux/msm_ion.h>
#include <asm/smcmod.h>
#include <mach/scm.h>
+#include <mach/socinfo.h>
static DEFINE_MUTEX(ioctl_lock);
@@ -513,6 +514,110 @@
return ret;
}
+static int smcmod_send_dec_cmd(struct smcmod_decrypt_req *reqp)
+{
+ struct ion_client *ion_clientp;
+ struct ion_handle *ion_handlep = NULL;
+ int ion_fd;
+ int ret;
+ u32 pa;
+ size_t size;
+ struct {
+ u32 args[4];
+ } req;
+ struct {
+ u32 args[3];
+ } rsp;
+
+ ion_clientp = msm_ion_client_create(UINT_MAX, "smcmod");
+ if (IS_ERR_OR_NULL(ion_clientp))
+ return PTR_ERR(ion_clientp);
+
+ switch (reqp->operation) {
+ case SMCMOD_DECRYPT_REQ_OP_METADATA: {
+ ion_fd = reqp->request.metadata.ion_fd;
+ ret = smcmod_ion_fd_to_phys(ion_fd, ion_clientp,
+ &ion_handlep, &pa, &size);
+ if (ret)
+ goto error;
+
+ req.args[0] = reqp->request.metadata.len;
+ req.args[1] = pa;
+ break;
+ }
+ case SMCMOD_DECRYPT_REQ_OP_IMG_FRAG: {
+ ion_fd = reqp->request.img_frag.ion_fd;
+ ret = smcmod_ion_fd_to_phys(ion_fd, ion_clientp,
+ &ion_handlep, &pa, &size);
+ if (ret)
+ goto error;
+
+ req.args[0] = reqp->request.img_frag.ctx_id;
+ req.args[1] = reqp->request.img_frag.last_frag;
+ req.args[2] = reqp->request.img_frag.frag_len;
+ req.args[3] = pa + reqp->request.img_frag.offset;
+ break;
+ }
+ default:
+ ret = -EINVAL;
+ goto error;
+ }
+
+ /*
+ * scm_call does cache maintenance over request and response buffers.
+ * The userspace must flush/invalidate ion input/output buffers itself.
+ */
+
+ ret = scm_call(reqp->service_id, reqp->command_id,
+ &req, sizeof(req), &rsp, sizeof(rsp));
+ if (ret)
+ goto error;
+
+ switch (reqp->operation) {
+ case SMCMOD_DECRYPT_REQ_OP_METADATA:
+ reqp->response.metadata.status = rsp.args[0];
+ reqp->response.metadata.ctx_id = rsp.args[1];
+ reqp->response.metadata.end_offset = rsp.args[2] - pa;
+ break;
+ case SMCMOD_DECRYPT_REQ_OP_IMG_FRAG: {
+ reqp->response.img_frag.status = rsp.args[0];
+ break;
+ }
+ default:
+ break;
+ }
+
+error:
+ if (!IS_ERR_OR_NULL(ion_clientp)) {
+ if (!IS_ERR_OR_NULL(ion_handlep))
+ ion_free(ion_clientp, ion_handlep);
+ ion_client_destroy(ion_clientp);
+ }
+ return ret;
+}
+
+static int smcmod_ioctl_check(unsigned cmd)
+{
+ switch (cmd) {
+ case SMCMOD_IOCTL_SEND_REG_CMD:
+ case SMCMOD_IOCTL_SEND_BUF_CMD:
+ case SMCMOD_IOCTL_SEND_CIPHER_CMD:
+ case SMCMOD_IOCTL_SEND_MSG_DIGEST_CMD:
+ case SMCMOD_IOCTL_GET_VERSION:
+ if (!cpu_is_fsm9xxx())
+ return -EINVAL;
+ break;
+ case SMCMOD_IOCTL_SEND_DECRYPT_CMD:
+ if (!cpu_is_msm8226())
+ return -EINVAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static long smcmod_ioctl(struct file *file, unsigned cmd, unsigned long arg)
{
void __user *argp = (void __user *)arg;
@@ -531,6 +636,10 @@
*/
mutex_lock(&ioctl_lock);
+ ret = smcmod_ioctl_check(cmd);
+ if (ret)
+ goto cleanup;
+
switch (cmd) {
case SMCMOD_IOCTL_SEND_REG_CMD:
{
@@ -652,6 +761,26 @@
}
break;
+ case SMCMOD_IOCTL_SEND_DECRYPT_CMD:
+ {
+ struct smcmod_decrypt_req req;
+
+ if (copy_from_user((void *)&req, argp, sizeof(req))) {
+ ret = -EFAULT;
+ goto cleanup;
+ }
+
+ ret = smcmod_send_dec_cmd(&req);
+ if (ret < 0)
+ goto cleanup;
+
+ if (copy_to_user(argp, (void *)&req, sizeof(req))) {
+ ret = -EFAULT;
+ goto cleanup;
+ }
+ }
+ break;
+
default:
ret = -EINVAL;
}
diff --git a/arch/arm/mach-msm/subsystem_restart.c b/arch/arm/mach-msm/subsystem_restart.c
index ffa00c9..01e0985 100644
--- a/arch/arm/mach-msm/subsystem_restart.c
+++ b/arch/arm/mach-msm/subsystem_restart.c
@@ -503,8 +503,10 @@
if (ret)
return ret;
- if (subsys->desc->is_not_loadable)
+ if (subsys->desc->is_not_loadable) {
+ subsys_set_state(subsys, SUBSYS_ONLINE);
return 0;
+ }
ret = wait_for_err_ready(subsys);
if (ret)
diff --git a/drivers/char/diag/diagchar.h b/drivers/char/diag/diagchar.h
index 3ae56c5..7154942 100644
--- a/drivers/char/diag/diagchar.h
+++ b/drivers/char/diag/diagchar.h
@@ -27,7 +27,7 @@
/* Size of the USB buffers used for read and write*/
#define USB_MAX_OUT_BUF 4096
-#define APPS_BUF_SIZE 2000
+#define APPS_BUF_SIZE 4096
#define IN_BUF_SIZE 16384
#define MAX_IN_BUF_SIZE 32768
#define MAX_SYNC_OBJ_NAME_SIZE 32
diff --git a/drivers/char/diag/diagfwd.c b/drivers/char/diag/diagfwd.c
index de4433b..379dc4d 100644
--- a/drivers/char/diag/diagfwd.c
+++ b/drivers/char/diag/diagfwd.c
@@ -69,6 +69,13 @@
void encode_rsp_and_send(int buf_length)
{
struct diag_smd_info *data = &(driver->smd_data[MODEM_DATA]);
+
+ if (buf_length > APPS_BUF_SIZE) {
+ pr_err("diag: In %s, invalid len %d, permissible len %d\n",
+ __func__, buf_length, APPS_BUF_SIZE);
+ return;
+ }
+
send.state = DIAG_STATE_START;
send.pkt = driver->apps_rsp_buf;
send.last = (void *)(driver->apps_rsp_buf + buf_length);
@@ -1315,10 +1322,12 @@
{
int i;
- if (index > 490) {
- pr_err("diag: error response too huge, aborting\n");
+ /* -1 to accomodate the first byte 0x13 */
+ if (index > APPS_BUF_SIZE-1) {
+ pr_err("diag: cannot send err rsp, huge length: %d\n", index);
return;
}
+
driver->apps_rsp_buf[0] = 0x13; /* error code 13 */
for (i = 0; i < index; i++)
driver->apps_rsp_buf[i+1] = *(driver->hdlc_buf+i);
diff --git a/drivers/gpu/msm/kgsl_pwrctrl.c b/drivers/gpu/msm/kgsl_pwrctrl.c
index 20391be..5479ae9 100644
--- a/drivers/gpu/msm/kgsl_pwrctrl.c
+++ b/drivers/gpu/msm/kgsl_pwrctrl.c
@@ -79,6 +79,7 @@
static void kgsl_pwrctrl_clk(struct kgsl_device *device, int state,
int requested_state);
static void kgsl_pwrctrl_axi(struct kgsl_device *device, int state);
+static void kgsl_pwrctrl_pwrrail(struct kgsl_device *device, int state);
/* Update the elapsed time at a particular clock level
* if the device is active(on_time = true).Otherwise
@@ -643,6 +644,9 @@
case KGSL_PWRFLAGS_AXI_ON:
kgsl_pwrctrl_axi(device, KGSL_PWRFLAGS_ON);
break;
+ case KGSL_PWRFLAGS_POWER_ON:
+ kgsl_pwrctrl_pwrrail(device, KGSL_PWRFLAGS_ON);
+ break;
}
set_bit(flag, &device->pwrctrl.ctrl_flags);
} else {
@@ -713,6 +717,20 @@
return __force_on_store(dev, attr, buf, count, KGSL_PWRFLAGS_AXI_ON);
}
+static int kgsl_pwrctrl_force_rail_on_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return __force_on_show(dev, attr, buf, KGSL_PWRFLAGS_POWER_ON);
+}
+
+static int kgsl_pwrctrl_force_rail_on_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return __force_on_store(dev, attr, buf, count, KGSL_PWRFLAGS_POWER_ON);
+}
+
DEVICE_ATTR(gpuclk, 0644, kgsl_pwrctrl_gpuclk_show, kgsl_pwrctrl_gpuclk_store);
DEVICE_ATTR(max_gpuclk, 0644, kgsl_pwrctrl_max_gpuclk_show,
kgsl_pwrctrl_max_gpuclk_store);
@@ -749,6 +767,9 @@
DEVICE_ATTR(force_bus_on, 0644,
kgsl_pwrctrl_force_bus_on_show,
kgsl_pwrctrl_force_bus_on_store);
+DEVICE_ATTR(force_rail_on, 0644,
+ kgsl_pwrctrl_force_rail_on_show,
+ kgsl_pwrctrl_force_rail_on_store);
static const struct device_attribute *pwrctrl_attr_list[] = {
&dev_attr_gpuclk,
@@ -765,6 +786,7 @@
&dev_attr_reset_count,
&dev_attr_force_clk_on,
&dev_attr_force_bus_on,
+ &dev_attr_force_rail_on,
NULL
};
@@ -917,6 +939,9 @@
{
struct kgsl_pwrctrl *pwr = &device->pwrctrl;
+ if (test_bit(KGSL_PWRFLAGS_POWER_ON, &pwr->ctrl_flags))
+ return;
+
if (state == KGSL_PWRFLAGS_OFF) {
if (test_and_clear_bit(KGSL_PWRFLAGS_POWER_ON,
&pwr->power_flags)) {
diff --git a/drivers/media/platform/msm/camera_v2/pproc/cpp/msm_cpp.c b/drivers/media/platform/msm/camera_v2/pproc/cpp/msm_cpp.c
index b8c1367..8b0f6f1 100644
--- a/drivers/media/platform/msm/camera_v2/pproc/cpp/msm_cpp.c
+++ b/drivers/media/platform/msm/camera_v2/pproc/cpp/msm_cpp.c
@@ -1465,6 +1465,13 @@
return -EINVAL;
}
+ if (u_stream_buff_info->num_buffs == 0) {
+ pr_err("%s:%d: Invalid number of buffers\n", __func__,
+ __LINE__);
+ kfree(u_stream_buff_info);
+ mutex_unlock(&cpp_dev->mutex);
+ return -EINVAL;
+ }
k_stream_buff_info.num_buffs = u_stream_buff_info->num_buffs;
k_stream_buff_info.identity = u_stream_buff_info->identity;
diff --git a/drivers/media/platform/msm/vidc/vidc_hfi.h b/drivers/media/platform/msm/vidc/vidc_hfi.h
index 406ede1..874738b 100644
--- a/drivers/media/platform/msm/vidc/vidc_hfi.h
+++ b/drivers/media/platform/msm/vidc/vidc_hfi.h
@@ -409,7 +409,7 @@
u32 input_tag;
u8 *packet_buffer;
u8 *extra_data_buffer;
- u32 rgData[0];
+ u32 rgData[1];
};
struct hfi_cmd_session_empty_buffer_uncompressed_plane0_packet {
@@ -428,7 +428,7 @@
u32 input_tag;
u8 *packet_buffer;
u8 *extra_data_buffer;
- u32 rgData[0];
+ u32 rgData[1];
};
struct hfi_cmd_session_empty_buffer_uncompressed_plane1_packet {
@@ -437,7 +437,7 @@
u32 filled_len;
u32 offset;
u8 *packet_buffer2;
- u32 rgData[0];
+ u32 rgData[1];
};
struct hfi_cmd_session_empty_buffer_uncompressed_plane2_packet {
@@ -446,7 +446,7 @@
u32 filled_len;
u32 offset;
u8 *packet_buffer3;
- u32 rgData[0];
+ u32 rgData[1];
};
struct hfi_cmd_session_fill_buffer_packet {
@@ -460,7 +460,7 @@
u32 output_tag;
u8 *packet_buffer;
u8 *extra_data_buffer;
- u32 rgData[0];
+ u32 rgData[1];
};
struct hfi_cmd_session_flush_packet {
diff --git a/drivers/media/platform/msm/wfd/vsg-subdev.c b/drivers/media/platform/msm/wfd/vsg-subdev.c
index e0a46cc..6ffaffa 100644
--- a/drivers/media/platform/msm/wfd/vsg-subdev.c
+++ b/drivers/media/platform/msm/wfd/vsg-subdev.c
@@ -462,8 +462,16 @@
static long vsg_return_ip_buffer(struct v4l2_subdev *sd, void *arg)
{
struct vsg_context *context = NULL;
- struct vsg_buf_info *buf_info = NULL, *last_buffer = NULL,
- *expected_buffer = NULL;
+ struct vsg_buf_info *buf_info = NULL, *temp = NULL,
+ /* last buffer sent for encoding */
+ *last_buffer = NULL,
+ /* buffer we expected to get back, ideally ==
+ * last_buffer, but might not be if sequence is
+ * encode, encode, return */
+ *expected_buffer = NULL,
+ /* buffer that we've sent for encoding at some point */
+ *known_buffer = NULL;
+ bool is_last_buffer = false;
int rc = 0;
if (!arg || !sd) {
@@ -477,41 +485,47 @@
buf_info = (struct vsg_buf_info *)arg;
last_buffer = context->last_buffer;
+ WFD_MSG_DBG("Return frame with paddr %p\n",
+ (void *)buf_info->mdp_buf_info.paddr);
+
if (!list_empty(&context->busy_queue.node)) {
expected_buffer = list_first_entry(&context->busy_queue.node,
struct vsg_buf_info, node);
}
- WFD_MSG_DBG("Return frame with paddr %p\n",
- (void *)buf_info->mdp_buf_info.paddr);
-
- if (!expected_buffer) {
- WFD_MSG_ERR("Unexpectedly received buffer from enc with "
- "paddr %p\n", (void *)buf_info->mdp_buf_info.paddr);
- goto return_ip_buf_bad_buf;
+ list_for_each_entry(temp, &context->busy_queue.node, node) {
+ if (mdp_buf_info_equals(&temp->mdp_buf_info,
+ &buf_info->mdp_buf_info)) {
+ known_buffer = temp;
+ break;
+ }
}
- expected_buffer->flags &= ~VSG_BUF_BEING_ENCODED;
- if (mdp_buf_info_equals(&expected_buffer->mdp_buf_info,
- &buf_info->mdp_buf_info)) {
- bool is_same_buffer = context->last_buffer &&
- mdp_buf_info_equals(
- &context->last_buffer->mdp_buf_info,
- &expected_buffer->mdp_buf_info);
-
- list_del(&expected_buffer->node);
- if (!is_same_buffer &&
- !(expected_buffer->flags & VSG_NEVER_RELEASE)) {
- vsg_release_input_buffer(context, expected_buffer);
- kfree(expected_buffer);
- }
- } else {
- WFD_MSG_ERR("Returned buffer %p is not latest buffer, "
- "expected %p\n",
- (void *)buf_info->mdp_buf_info.paddr,
- (void *)expected_buffer->mdp_buf_info.paddr);
- rc = -EINVAL;
+ if (!expected_buffer || !known_buffer) {
+ WFD_MSG_ERR("Unexpectedly received buffer from enc with "
+ "paddr %p\n", (void *)buf_info->mdp_buf_info.paddr);
+ rc = -EBADHANDLE;
goto return_ip_buf_bad_buf;
+ } else if (known_buffer != expected_buffer) {
+ /* Buffers can come back out of order if encoder decides to drop
+ * a frame */
+ WFD_MSG_DBG(
+ "Got a buffer (%p) out of order. Preferred to get %p\n",
+ (void *)known_buffer->mdp_buf_info.paddr,
+ (void *)expected_buffer->mdp_buf_info.paddr);
+ }
+
+ known_buffer->flags &= ~VSG_BUF_BEING_ENCODED;
+ is_last_buffer = context->last_buffer &&
+ mdp_buf_info_equals(
+ &context->last_buffer->mdp_buf_info,
+ &known_buffer->mdp_buf_info);
+
+ list_del(&known_buffer->node);
+ if (!is_last_buffer &&
+ !(known_buffer->flags & VSG_NEVER_RELEASE)) {
+ vsg_release_input_buffer(context, known_buffer);
+ kfree(known_buffer);
}
return_ip_buf_bad_buf:
diff --git a/drivers/platform/msm/sps/bam.c b/drivers/platform/msm/sps/bam.c
index 6412fc0..d6af279 100644
--- a/drivers/platform/msm/sps/bam.c
+++ b/drivers/platform/msm/sps/bam.c
@@ -53,6 +53,7 @@
#define IRQ_EN (0x1c)
#define AHB_MASTER_ERR_CTRLS (0x24)
#define AHB_MASTER_ERR_ADDR (0x28)
+#define AHB_MASTER_ERR_ADDR_MSB (0x104)
#define AHB_MASTER_ERR_DATA (0x2c)
#define TRUST_REG (0x70)
#define TEST_BUS_SEL (0x74)
@@ -61,6 +62,7 @@
#define IRQ_SRCS_EE(n) (0x800 + 128 * (n))
#define IRQ_SRCS_MSK_EE(n) (0x804 + 128 * (n))
#define IRQ_SRCS_UNMASKED_EE(n) (0x808 + 128 * (n))
+#define PIPE_ATTR_EE(n) (0x80c + 128 * (n))
#define P_CTRL(n) (0x1000 + 4096 * (n))
#define P_RST(n) (0x1004 + 4096 * (n))
@@ -74,10 +76,13 @@
#define P_CNSMR_SDBND(n) (0x1028 + 4096 * (n))
#define P_TRUST_REG(n) (0x1030 + 4096 * (n))
#define P_EVNT_DEST_ADDR(n) (0x182c + 4096 * (n))
+#define P_EVNT_DEST_ADDR_MSB(n) (0x1934 + 4096 * (n))
#define P_EVNT_REG(n) (0x1818 + 4096 * (n))
#define P_SW_OFSTS(n) (0x1800 + 4096 * (n))
#define P_DATA_FIFO_ADDR(n) (0x1824 + 4096 * (n))
+#define P_DATA_FIFO_ADDR_MSB(n) (0x1924 + 4096 * (n))
#define P_DESC_FIFO_ADDR(n) (0x181c + 4096 * (n))
+#define P_DESC_FIFO_ADDR_MSB(n) (0x1914 + 4096 * (n))
#define P_EVNT_GEN_TRSHLD(n) (0x1828 + 4096 * (n))
#define P_FIFO_SIZES(n) (0x1820 + 4096 * (n))
#define P_RETR_CNTXT(n) (0x1834 + 4096 * (n))
@@ -86,6 +91,7 @@
#define P_AU_PSM_CNTXT_1(n) (0x1804 + 4096 * (n))
#define P_PSM_CNTXT_2(n) (0x1808 + 4096 * (n))
#define P_PSM_CNTXT_3(n) (0x180c + 4096 * (n))
+#define P_PSM_CNTXT_3_MSB(n) (0x1904 + 4096 * (n))
#define P_PSM_CNTXT_4(n) (0x1810 + 4096 * (n))
#define P_PSM_CNTXT_5(n) (0x1814 + 4096 * (n))
@@ -95,6 +101,7 @@
*
*/
/* CTRL */
+#define BAM_MESS_ONLY_CANCEL_WB 0x100000
#define CACHE_MISS_ERR_RESP_EN 0x80000
#define LOCAL_CLK_GATING 0x60000
#define IBC_DISABLE 0x10000
@@ -115,7 +122,7 @@
#define BAM_SECURED 0x10000
#define BAM_USE_VMIDMT 0x8000
#define BAM_AXI_ACTIVE 0x4000
-#define BAM_CE_BUFFER_SIZE 0x2000
+#define BAM_CE_BUFFER_SIZE 0x3000
#define BAM_NUM_EES 0xf00
#define BAM_REVISION 0xff
@@ -127,6 +134,7 @@
/* NUM_PIPES */
#define BAM_NON_PIPE_GRP 0xff000000
#define BAM_PERIPH_NON_PIPE_GRP 0xff0000
+#define BAM_DATA_ADDR_BUS_WIDTH 0xC000
#define BAM_NUM_PIPES 0xff
/* TIMER */
@@ -188,6 +196,7 @@
#define BAM_TESTBUS_SEL 0x7f
/* CNFG_BITS */
+#define CNFG_BITS_AOS_OVERFLOW_PRVNT 0x80000000
#define CNFG_BITS_MULTIPLE_EVENTS_DESC_AVAIL_EN 0x40000000
#define CNFG_BITS_MULTIPLE_EVENTS_SIZE_EN 0x20000000
#define CNFG_BITS_BAM_ZLT_W_CD_SUPPORT 0x10000000
@@ -210,6 +219,10 @@
#define CNFG_BITS_BAM_FULL_PIPE 0x800
#define CNFG_BITS_BAM_PIPE_CNFG 0x4
+/* PIPE_ATTR_EEn*/
+#define BAM_ENABLED 0x80000000
+#define P_ATTR 0x7fffffff
+
/* P_ctrln */
#define P_LOCK_GROUP 0x1f0000
#define P_WRITE_NWD 0x800
@@ -234,6 +247,8 @@
#define BAM_P_EE 0x7
/* P_IRQ_STTSn */
+#define P_IRQ_STTS_P_HRESP_ERR_IRQ 0x80
+#define P_IRQ_STTS_P_PIPE_RST_ERR_IRQ 0x40
#define P_IRQ_STTS_P_TRNSFR_END_IRQ 0x20
#define P_IRQ_STTS_P_ERR_IRQ 0x10
#define P_IRQ_STTS_P_OUT_OF_DESC_IRQ 0x8
@@ -242,6 +257,8 @@
#define P_IRQ_STTS_P_PRCSD_DESC_IRQ 0x1
/* P_IRQ_CLRn */
+#define P_IRQ_CLR_P_HRESP_ERR_CLR 0x80
+#define P_IRQ_CLR_P_PIPE_RST_ERR_CLR 0x40
#define P_IRQ_CLR_P_TRNSFR_END_CLR 0x20
#define P_IRQ_CLR_P_ERR_CLR 0x10
#define P_IRQ_CLR_P_OUT_OF_DESC_CLR 0x8
@@ -250,6 +267,8 @@
#define P_IRQ_CLR_P_PRCSD_DESC_CLR 0x1
/* P_IRQ_ENn */
+#define P_IRQ_EN_P_HRESP_ERR_EN 0x80
+#define P_IRQ_EN_P_PIPE_RST_ERR_EN 0x40
#define P_IRQ_EN_P_TRNSFR_END_EN 0x20
#define P_IRQ_EN_P_ERR_EN 0x10
#define P_IRQ_EN_P_OUT_OF_DESC_EN 0x8
@@ -404,6 +423,7 @@
/* NUM_PIPES */
#define BAM_NON_PIPE_GRP 0xff000000
#define BAM_PERIPH_NON_PIPE_GRP 0xff0000
+#define BAM_DATA_ADDR_BUS_WIDTH 0xC000
#define BAM_NUM_PIPES 0xff
/* DESC_CNT_TRSHLD */
@@ -686,8 +706,16 @@
bam_write_reg_field(base, CTRL, LOCAL_CLK_GATING, 0);
else
bam_write_reg_field(base, CTRL, LOCAL_CLK_GATING, 1);
-#endif
+ if (enhd_pipe) {
+ if (options & SPS_BAM_CANCEL_WB)
+ bam_write_reg_field(base, CTRL,
+ BAM_MESS_ONLY_CANCEL_WB, 1);
+ else
+ bam_write_reg_field(base, CTRL,
+ BAM_MESS_ONLY_CANCEL_WB, 0);
+ }
+#endif
bam_write_reg(base, DESC_CNT_TRSHLD, summing_threshold);
bam_write_reg(base, CNFG_BITS, cfg_bits);
@@ -786,18 +814,43 @@
return 0;
}
+#ifdef CONFIG_SPS_SUPPORT_NDP_BAM
+static inline u32 bam_get_pipe_attr(void *base, u32 ee, bool global)
+{
+ u32 val;
+
+ if (global)
+ val = bam_read_reg_field(base, PIPE_ATTR_EE(ee), BAM_ENABLED);
+ else
+ val = bam_read_reg_field(base, PIPE_ATTR_EE(ee), P_ATTR);
+
+ return val;
+}
+#else
+static inline u32 bam_get_pipe_attr(void *base, u32 ee, bool global)
+{
+ return 0;
+}
+#endif
+
/**
* Verify that a BAM device is enabled and gathers the hardware
* configuration.
*
*/
-int bam_check(void *base, u32 *version, u32 *num_pipes)
+int bam_check(void *base, u32 *version, u32 ee, u32 *num_pipes)
{
u32 ver = 0;
+ u32 enabled = 0;
SPS_DBG2("sps:%s:bam=0x%x(va).", __func__, (u32) base);
- if (!bam_read_reg_field(base, CTRL, BAM_EN)) {
+ if (!enhd_pipe)
+ enabled = bam_read_reg_field(base, CTRL, BAM_EN);
+ else
+ enabled = bam_get_pipe_attr(base, ee, true);
+
+ if (!enabled) {
SPS_ERR("sps:%s:bam 0x%x(va) is not enabled.\n",
__func__, (u32) base);
return -ENODEV;
@@ -843,10 +896,11 @@
* including the TEST_BUS register content under
* different TEST_BUS_SEL values.
*/
-static void bam_output_register_content(void *base)
+void bam_output_register_content(void *base, u32 ee)
{
u32 num_pipes;
u32 i;
+ u32 pipe_attr = 0;
print_bam_test_bus_reg(base, 0);
@@ -857,8 +911,18 @@
SPS_INFO("sps:bam 0x%x(va) has %d pipes.",
(u32) base, num_pipes);
- for (i = 0; i < num_pipes; i++)
- print_bam_pipe_selected_reg(base, i);
+ pipe_attr = enhd_pipe ?
+ bam_get_pipe_attr(base, ee, false) : 0x0;
+
+ if (!enhd_pipe || !pipe_attr)
+ for (i = 0; i < num_pipes; i++)
+ print_bam_pipe_selected_reg(base, i);
+ else {
+ for (i = 0; i < num_pipes; i++) {
+ if (pipe_attr & (1UL << i))
+ print_bam_pipe_selected_reg(base, i);
+ }
+ }
}
/**
@@ -878,13 +942,13 @@
SPS_ERR("sps:bam 0x%x(va);bam irq status="
"0x%x.\nsps: BAM_ERROR_IRQ\n",
(u32) base, status);
- bam_output_register_content(base);
+ bam_output_register_content(base, ee);
*cb_case = SPS_CALLBACK_BAM_ERROR_IRQ;
} else if (status & IRQ_STTS_BAM_HRESP_ERR_IRQ) {
SPS_ERR("sps:bam 0x%x(va);bam irq status="
"0x%x.\nsps: BAM_HRESP_ERR_IRQ\n",
(u32) base, status);
- bam_output_register_content(base);
+ bam_output_register_content(base, ee);
*cb_case = SPS_CALLBACK_BAM_HRESP_ERR_IRQ;
#ifdef CONFIG_SPS_SUPPORT_NDP_BAM
} else if (status & IRQ_STTS_BAM_TIMER_IRQ) {
@@ -926,7 +990,8 @@
bam_write_reg(base, P_EVNT_GEN_TRSHLD(pipe), param->event_threshold);
- bam_write_reg(base, P_DESC_FIFO_ADDR(pipe), param->desc_base);
+ bam_write_reg(base, P_DESC_FIFO_ADDR(pipe),
+ SPS_GET_LOWER_ADDR(param->desc_base));
bam_write_reg_field(base, P_FIFO_SIZES(pipe), P_DESC_FIFO_SIZE,
param->desc_size);
@@ -934,6 +999,10 @@
param->stream_mode);
#ifdef CONFIG_SPS_SUPPORT_NDP_BAM
+ if (SPS_LPAE)
+ bam_write_reg(base, P_DESC_FIFO_ADDR_MSB(pipe),
+ SPS_GET_UPPER_ADDR(param->desc_base));
+
bam_write_reg_field(base, P_CTRL(pipe), P_LOCK_GROUP,
param->lock_group);
@@ -946,7 +1015,7 @@
P_EVNT_REG(param->peer_pipe);
bam_write_reg(base, P_DATA_FIFO_ADDR(pipe),
- param->data_base);
+ SPS_GET_LOWER_ADDR(param->data_base));
bam_write_reg_field(base, P_FIFO_SIZES(pipe),
P_DATA_FIFO_SIZE, param->data_size);
@@ -959,6 +1028,12 @@
param->peer_pipe);
#ifdef CONFIG_SPS_SUPPORT_NDP_BAM
+ if (SPS_LPAE) {
+ bam_write_reg(base, P_EVNT_DEST_ADDR_MSB(pipe), 0x0);
+ bam_write_reg(base, P_DATA_FIFO_ADDR_MSB(pipe),
+ SPS_GET_UPPER_ADDR(param->data_base));
+ }
+
bam_write_reg_field(base, P_CTRL(pipe), P_WRITE_NWD,
param->write_nwd);
@@ -1033,6 +1108,24 @@
u32 src_mask, u32 ee)
{
SPS_DBG2("sps:%s:bam=0x%x(va).pipe=%d.", __func__, (u32) base, pipe);
+ if (src_mask & BAM_PIPE_IRQ_RST_ERROR) {
+ if (enhd_pipe)
+ bam_write_reg_field(base, IRQ_EN,
+ IRQ_EN_BAM_ERROR_EN, 0);
+ else {
+ src_mask &= ~BAM_PIPE_IRQ_RST_ERROR;
+ SPS_DBG2("sps: SPS_O_RST_ERROR is not supported\n");
+ }
+ }
+ if (src_mask & BAM_PIPE_IRQ_HRESP_ERROR) {
+ if (enhd_pipe)
+ bam_write_reg_field(base, IRQ_EN,
+ IRQ_EN_BAM_HRESP_ERR_EN, 0);
+ else {
+ src_mask &= ~BAM_PIPE_IRQ_HRESP_ERROR;
+ SPS_DBG2("sps: SPS_O_HRESP_ERROR is not supported\n");
+ }
+ }
bam_write_reg(base, P_IRQ_EN(pipe), src_mask);
bam_write_reg_field(base, IRQ_SRCS_MSK_EE(ee), (1 << pipe), irq_en);
@@ -1294,6 +1387,7 @@
u32 bam_num_pipes;
u32 bam_pipe_num;
+ u32 bam_data_addr_bus_width;
u32 bam_desc_cnt_trshld;
u32 bam_desc_cnt_trd_val;
@@ -1304,6 +1398,7 @@
u32 bam_irq_src_ee = 0;
u32 bam_irq_msk_ee = 0;
u32 bam_irq_unmsk_ee = 0;
+ u32 bam_pipe_attr_ee = 0;
u32 bam_ahb_err_ctrl;
u32 bam_ahb_err_addr;
@@ -1313,6 +1408,7 @@
u32 bam_sw_rev = 0;
u32 bam_timer = 0;
u32 bam_timer_ctrl = 0;
+ u32 bam_ahb_err_addr_msb = 0;
if (base == NULL)
return;
@@ -1324,6 +1420,8 @@
bam_num_pipes = bam_read_reg(base, NUM_PIPES);
bam_pipe_num = bam_read_reg_field(base, NUM_PIPES, BAM_NUM_PIPES);
+ bam_data_addr_bus_width = bam_read_reg_field(base, NUM_PIPES,
+ BAM_DATA_ADDR_BUS_WIDTH);
bam_desc_cnt_trshld = bam_read_reg(base, DESC_CNT_TRSHLD);
bam_desc_cnt_trd_val = bam_read_reg_field(base, DESC_CNT_TRSHLD,
@@ -1347,6 +1445,11 @@
bam_sw_rev = bam_read_reg(base, SW_REVISION);
bam_timer = bam_read_reg(base, TIMER);
bam_timer_ctrl = bam_read_reg(base, TIMER_CTRL);
+ bam_ahb_err_addr_msb = SPS_LPAE ?
+ bam_read_reg(base, AHB_MASTER_ERR_ADDR_MSB) : 0;
+ if (ee < BAM_MAX_EES)
+ bam_pipe_attr_ee = enhd_pipe ?
+ bam_read_reg(base, PIPE_ATTR_EE(ee)) : 0x0;
#endif
@@ -1358,6 +1461,8 @@
SPS_INFO(" NUM_EES: %d\n", bam_rev_ee_num);
SPS_INFO("BAM_SW_REVISION: 0x%x\n", bam_sw_rev);
SPS_INFO("BAM_NUM_PIPES: %d\n", bam_num_pipes);
+ SPS_INFO("BAM_DATA_ADDR_BUS_WIDTH: %d\n",
+ ((bam_data_addr_bus_width == 0x0) ? 32 : 36));
SPS_INFO(" NUM_PIPES: %d\n", bam_pipe_num);
SPS_INFO("BAM_DESC_CNT_TRSHLD: 0x%x\n", bam_desc_cnt_trshld);
SPS_INFO(" DESC_CNT_TRSHLD: 0x%x (%d)\n", bam_desc_cnt_trd_val,
@@ -1371,10 +1476,12 @@
SPS_INFO("BAM_IRQ_SRCS_MSK_EE(%d): 0x%x\n", ee, bam_irq_msk_ee);
SPS_INFO("BAM_IRQ_SRCS_UNMASKED_EE(%d): 0x%x\n", ee,
bam_irq_unmsk_ee);
+ SPS_INFO("BAM_PIPE_ATTR_EE(%d): 0x%x\n", ee, bam_pipe_attr_ee);
}
SPS_INFO("BAM_AHB_MASTER_ERR_CTRLS: 0x%x\n", bam_ahb_err_ctrl);
SPS_INFO("BAM_AHB_MASTER_ERR_ADDR: 0x%x\n", bam_ahb_err_addr);
+ SPS_INFO("BAM_AHB_MASTER_ERR_ADDR_MSB: 0x%x\n", bam_ahb_err_addr_msb);
SPS_INFO("BAM_AHB_MASTER_ERR_DATA: 0x%x\n", bam_ahb_err_data);
SPS_INFO("BAM_CNFG_BITS: 0x%x\n", bam_cnfg_bits);
@@ -1421,9 +1528,12 @@
u32 p_write_pointer;
u32 p_evnt_dest;
+ u32 p_evnt_dest_msb = 0;
u32 p_desc_fifo_addr;
+ u32 p_desc_fifo_addr_msb = 0;
u32 p_desc_fifo_size;
u32 p_data_fifo_addr;
+ u32 p_data_fifo_addr_msb = 0;
u32 p_data_fifo_size;
u32 p_fifo_sizes;
@@ -1439,6 +1549,7 @@
u32 p_au_ct1;
u32 p_psm_ct2;
u32 p_psm_ct3;
+ u32 p_psm_ct3_msb = 0;
u32 p_psm_ct4;
u32 p_psm_ct5;
@@ -1520,6 +1631,15 @@
p_timer_ctrl = bam_read_reg(base, P_TIMER_CTRL(pipe));
#ifdef CONFIG_SPS_SUPPORT_NDP_BAM
+ p_evnt_dest_msb = SPS_LPAE ?
+ bam_read_reg(base, P_EVNT_DEST_ADDR_MSB(pipe)) : 0;
+
+ p_desc_fifo_addr_msb = SPS_LPAE ?
+ bam_read_reg(base, P_DESC_FIFO_ADDR_MSB(pipe)) : 0;
+ p_data_fifo_addr_msb = SPS_LPAE ?
+ bam_read_reg(base, P_DATA_FIFO_ADDR_MSB(pipe)) : 0;
+
+ p_psm_ct3_msb = SPS_LPAE ? bam_read_reg(base, P_PSM_CNTXT_3(pipe)) : 0;
p_lock_group = bam_read_reg_field(base, P_CTRL(pipe), P_LOCK_GROUP);
p_df_ct = bam_read_reg(base, P_DF_CNTXT(pipe));
p_df_offset = bam_read_reg_field(base, P_DF_CNTXT(pipe),
@@ -1568,7 +1688,9 @@
SPS_INFO(" DF_OFFSET: 0x%x\n", p_df_offset);
SPS_INFO("BAM_P_DESC_FIFO_ADDR: 0x%x\n", p_desc_fifo_addr);
+ SPS_INFO("BAM_P_DESC_FIFO_ADDR_MSB: 0x%x\n", p_desc_fifo_addr_msb);
SPS_INFO("BAM_P_DATA_FIFO_ADDR: 0x%x\n", p_data_fifo_addr);
+ SPS_INFO("BAM_P_DATA_FIFO_ADDR_MSB: 0x%x\n", p_data_fifo_addr_msb);
SPS_INFO("BAM_P_FIFO_SIZES: 0x%x\n", p_fifo_sizes);
SPS_INFO(" DESC_FIFO_SIZE: 0x%x (%d)\n", p_desc_fifo_size,
p_desc_fifo_size);
@@ -1576,6 +1698,7 @@
p_data_fifo_size);
SPS_INFO("BAM_P_EVNT_DEST_ADDR: 0x%x\n", p_evnt_dest);
+ SPS_INFO("BAM_P_EVNT_DEST_ADDR_MSB: 0x%x\n", p_evnt_dest_msb);
SPS_INFO("BAM_P_EVNT_GEN_TRSHLD: 0x%x\n", p_evnt_trd);
SPS_INFO(" EVNT_GEN_TRSHLD: 0x%x (%d)\n", p_evnt_trd_val,
p_evnt_trd_val);
@@ -1583,6 +1706,7 @@
SPS_INFO("BAM_P_AU_PSM_CNTXT_1: 0x%x\n", p_au_ct1);
SPS_INFO("BAM_P_PSM_CNTXT_2: 0x%x\n", p_psm_ct2);
SPS_INFO("BAM_P_PSM_CNTXT_3: 0x%x\n", p_psm_ct3);
+ SPS_INFO("BAM_P_PSM_CNTXT_3_MSB: 0x%x\n", p_psm_ct3_msb);
SPS_INFO("BAM_P_PSM_CNTXT_4: 0x%x\n", p_psm_ct4);
SPS_INFO("BAM_P_PSM_CNTXT_5: 0x%x\n", p_psm_ct5);
SPS_INFO("BAM_P_TIMER: 0x%x\n", p_timer);
diff --git a/drivers/platform/msm/sps/bam.h b/drivers/platform/msm/sps/bam.h
index 2a7f05b..d34a7d3 100644
--- a/drivers/platform/msm/sps/bam.h
+++ b/drivers/platform/msm/sps/bam.h
@@ -1,4 +1,4 @@
-/* Copyright (c) 2011-2012, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -72,7 +72,7 @@
enum bam_pipe_dir dir;
enum bam_pipe_mode mode;
enum bam_write_nwd write_nwd;
- u32 desc_base; /* Physical address of descriptor FIFO */
+ phys_addr_t desc_base; /* Physical address of descriptor FIFO */
u32 desc_size; /* Size (bytes) of descriptor FIFO */
u32 lock_group; /* The lock group this pipe belongs to */
enum bam_stream_mode stream_mode;
@@ -81,7 +81,7 @@
/* The following are only valid if mode is BAM2BAM */
u32 peer_phys_addr;
u32 peer_pipe;
- u32 data_base; /* Physical address of data FIFO */
+ phys_addr_t data_base; /* Physical address of data FIFO */
u32 data_size; /* Size (bytes) of data FIFO */
};
@@ -139,12 +139,14 @@
*
* @version - return BAM hardware version
*
+ * @ee - BAM execution environment index
+ *
* @num_pipes - return number of pipes
*
* @return 0 on success, negative value on error
*
*/
-int bam_check(void *base, u32 *version, u32 *num_pipes);
+int bam_check(void *base, u32 *version, u32 ee, u32 *num_pipes);
/**
* Disable a BAM device
@@ -159,6 +161,17 @@
void bam_exit(void *base, u32 ee);
/**
+ * This function prints BAM register content
+ * including TEST_BUS and PIPE register content.
+ *
+ * @base - BAM virtual base address.
+ *
+ * @ee - BAM execution environment index
+ */
+void bam_output_register_content(void *base, u32 ee);
+
+
+/**
* Get BAM IRQ source and clear global IRQ status
*
* This function gets BAM IRQ source.
@@ -178,6 +191,7 @@
u32 bam_check_irq_source(void *base, u32 ee, u32 mask,
enum sps_callback_case *cb_case);
+
/**
* Initialize a BAM pipe
*
diff --git a/drivers/platform/msm/sps/sps.c b/drivers/platform/msm/sps/sps.c
index 2e77114..6ccfd29 100644
--- a/drivers/platform/msm/sps/sps.c
+++ b/drivers/platform/msm/sps/sps.c
@@ -80,6 +80,7 @@
static struct sps_drv *sps;
u32 d_type;
+bool enhd_pipe;
static void sps_device_de_init(void);
@@ -1610,7 +1611,7 @@
* Perform a single DMA transfer on an SPS connection end point
*
*/
-int sps_transfer_one(struct sps_pipe *h, u32 addr, u32 size,
+int sps_transfer_one(struct sps_pipe *h, phys_addr_t addr, u32 size,
void *user, u32 flags)
{
struct sps_pipe *pipe = h;
@@ -1632,7 +1633,8 @@
return SPS_ERROR;
result = sps_bam_pipe_transfer_one(bam, pipe->pipe_index,
- addr, size, user, flags);
+ SPS_GET_LOWER_ADDR(addr), size, user,
+ DESC_FLAG_WORD(flags, addr));
sps_bam_unlock(bam);
@@ -2454,6 +2456,11 @@
} else
SPS_DBG("sps:device type is %d.", d_type);
+ enhd_pipe = of_property_read_bool((&pdev->dev)->of_node,
+ "qcom,pipe-attr-ee");
+ SPS_DBG2("sps:PIPE_ATTR_EE is %s supported.\n",
+ (enhd_pipe ? "" : "not"));
+
return 0;
}
diff --git a/drivers/platform/msm/sps/sps_bam.c b/drivers/platform/msm/sps/sps_bam.c
index 80056f5..d972e7b 100644
--- a/drivers/platform/msm/sps/sps_bam.c
+++ b/drivers/platform/msm/sps/sps_bam.c
@@ -76,7 +76,9 @@
{SPS_EVENT_INACTIVE, SPS_O_INACTIVE, BAM_PIPE_IRQ_TIMER},
{SPS_EVENT_OUT_OF_DESC, SPS_O_OUT_OF_DESC,
BAM_PIPE_IRQ_OUT_OF_DESC},
- {SPS_EVENT_ERROR, SPS_O_ERROR, BAM_PIPE_IRQ_ERROR}
+ {SPS_EVENT_ERROR, SPS_O_ERROR, BAM_PIPE_IRQ_ERROR},
+ {SPS_EVENT_RST_ERROR, SPS_O_RST_ERROR, BAM_PIPE_IRQ_RST_ERROR},
+ {SPS_EVENT_HRESP_ERROR, SPS_O_HRESP_ERROR, BAM_PIPE_IRQ_HRESP_ERROR}
};
/* Pipe event source handler */
@@ -260,7 +262,8 @@
dev->props.options);
else
/* No, so just verify that it is enabled */
- rc = bam_check(dev->base, &dev->version, &num_pipes);
+ rc = bam_check(dev->base, &dev->version,
+ dev->props.ee, &num_pipes);
if (rc) {
SPS_ERR("sps:Fail to init BAM 0x%x IRQ %d\n",
@@ -1283,14 +1286,19 @@
desc->addr = addr;
desc->size = size;
+
if ((flags & SPS_IOVEC_FLAG_DEFAULT) == 0) {
- desc->flags = flags & BAM_IOVEC_FLAG_MASK;
+ desc->flags = (flags & BAM_IOVEC_FLAG_MASK)
+ | DESC_UPPER_ADDR(flags);
} else {
if (pipe->mode == SPS_MODE_SRC)
- desc->flags = SPS_IOVEC_FLAG_INT;
+ desc->flags = SPS_IOVEC_FLAG_INT
+ | DESC_UPPER_ADDR(flags);
else
- desc->flags = SPS_IOVEC_FLAG_INT | SPS_IOVEC_FLAG_EOT;
+ desc->flags = (SPS_IOVEC_FLAG_INT | SPS_IOVEC_FLAG_EOT)
+ | DESC_UPPER_ADDR(flags);
}
+
#ifdef SPS_BAM_STATISTICS
if ((flags & SPS_IOVEC_FLAG_INT))
pipe->sys.int_flags++;
@@ -1763,6 +1771,30 @@
return;
}
+ if ((status & SPS_O_RST_ERROR) && enhd_pipe) {
+ SPS_ERR("sps:bam 0x%x ;pipe 0x%x irq status=0x%x.\n"
+ "sps: BAM_PIPE_IRQ_RST_ERROR\n",
+ BAM_ID(dev), pipe_index, status);
+ bam_output_register_content(dev->base, dev->props.ee);
+ pipe_handler_generic(dev, pipe,
+ SPS_EVENT_RST_ERROR);
+ status &= ~SPS_O_RST_ERROR;
+ if (status == 0)
+ return;
+ }
+
+ if ((status & SPS_O_HRESP_ERROR) && enhd_pipe) {
+ SPS_ERR("sps:bam 0x%x ;pipe 0x%x irq status=0x%x.\n"
+ "sps: BAM_PIPE_IRQ_HRESP_ERROR\n",
+ BAM_ID(dev), pipe_index, status);
+ bam_output_register_content(dev->base, dev->props.ee);
+ pipe_handler_generic(dev, pipe,
+ SPS_EVENT_HRESP_ERROR);
+ status &= ~SPS_O_HRESP_ERROR;
+ if (status == 0)
+ return;
+ }
+
if ((status & SPS_EVENT_ERROR))
pipe_handler_generic(dev, pipe, SPS_EVENT_ERROR);
}
diff --git a/drivers/platform/msm/sps/sps_bam.h b/drivers/platform/msm/sps/sps_bam.h
index dede487..da5dafd 100644
--- a/drivers/platform/msm/sps/sps_bam.h
+++ b/drivers/platform/msm/sps/sps_bam.h
@@ -50,6 +50,10 @@
BAM_PIPE_IRQ_ERROR = 0x00000010,
/* End-Of-Transfer */
BAM_PIPE_IRQ_EOT = 0x00000020,
+ /* Pipe RESET unsuccessful */
+ BAM_PIPE_IRQ_RST_ERROR = 0x00000040,
+ /* Errorneous Hresponse by AHB MASTER */
+ BAM_PIPE_IRQ_HRESP_ERROR = 0x00000080,
};
/* Halt Type */
diff --git a/drivers/platform/msm/sps/sps_map.c b/drivers/platform/msm/sps/sps_map.c
index d007b31..70735c3 100644
--- a/drivers/platform/msm/sps/sps_map.c
+++ b/drivers/platform/msm/sps/sps_map.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2011-2012, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -96,16 +96,16 @@
*/
desc = spsi_get_mem_ptr(map->desc_base);
if (desc == NULL) {
- SPS_ERR("sps:Cannot get virt addr for I/O buffer: 0x%x",
- map->desc_base);
+ SPS_ERR("sps:Cannot get virt addr for I/O buffer: %pa\n",
+ &map->desc_base);
return SPS_ERROR;
}
if (map->data_size > 0 && map->data_base != SPS_ADDR_INVALID) {
data = spsi_get_mem_ptr(map->data_base);
if (data == NULL) {
- SPS_ERR("sps:Can't get virt addr for I/O buffer: 0x%x",
- map->data_base);
+ SPS_ERR("sps:Can't get virt addr for I/O buffer: %pa",
+ &map->data_base);
return SPS_ERROR;
}
} else {
diff --git a/drivers/platform/msm/sps/sps_map.h b/drivers/platform/msm/sps/sps_map.h
index 7db8043..7ee4713 100644
--- a/drivers/platform/msm/sps/sps_map.h
+++ b/drivers/platform/msm/sps/sps_map.h
@@ -1,4 +1,4 @@
-/* Copyright (c) 2011, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2011,2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -36,9 +36,9 @@
/* Resource parameters */
u32 config; /* Configuration (stream) identifier */
- u32 desc_base; /* Physical address of descriptor FIFO */
+ phys_addr_t desc_base; /* Physical address of descriptor FIFO */
u32 desc_size; /* Size (bytes) of descriptor FIFO */
- u32 data_base; /* Physical address of data FIFO */
+ phys_addr_t data_base; /* Physical address of data FIFO */
u32 data_size; /* Size (bytes) of data FIFO */
};
diff --git a/drivers/platform/msm/sps/sps_mem.c b/drivers/platform/msm/sps/sps_mem.c
index b44e3c4..faa1618 100644
--- a/drivers/platform/msm/sps/sps_mem.c
+++ b/drivers/platform/msm/sps/sps_mem.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2011-2012, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -25,7 +25,7 @@
#include "sps_bam.h"
#include "spsi.h"
-static u32 iomem_phys;
+static phys_addr_t iomem_phys;
static void *iomem_virt;
static u32 iomem_size;
static u32 iomem_offset;
@@ -40,7 +40,7 @@
* Translate physical to virtual address
*
*/
-void *spsi_get_mem_ptr(u32 phys_addr)
+void *spsi_get_mem_ptr(phys_addr_t phys_addr)
{
void *virt = NULL;
@@ -49,8 +49,8 @@
virt = (u8 *) iomem_virt + (phys_addr - iomem_phys);
} else {
virt = phys_to_virt(phys_addr);
- SPS_ERR("sps:spsi_get_mem_ptr.invalid phys addr=0x%x.",
- phys_addr);
+ SPS_ERR("sps:spsi_get_mem_ptr.invalid phys addr=0x%pa.",
+ &phys_addr);
}
return virt;
}
@@ -59,9 +59,9 @@
* Allocate I/O (pipe) memory
*
*/
-u32 sps_mem_alloc_io(u32 bytes)
+phys_addr_t sps_mem_alloc_io(u32 bytes)
{
- u32 phys_addr = SPS_ADDR_INVALID;
+ phys_addr_t phys_addr = SPS_ADDR_INVALID;
u32 virt_addr = 0;
virt_addr = gen_pool_alloc(pool, bytes);
@@ -74,8 +74,8 @@
return SPS_ADDR_INVALID;
}
- SPS_DBG2("sps:sps_mem_alloc_io.phys=0x%x.virt=0x%x.size=0x%x.",
- phys_addr, virt_addr, bytes);
+ SPS_DBG2("sps:sps_mem_alloc_io.phys=%pa.virt=0x%x.size=0x%x.",
+ &phys_addr, virt_addr, bytes);
return phys_addr;
}
@@ -84,15 +84,15 @@
* Free I/O memory
*
*/
-void sps_mem_free_io(u32 phys_addr, u32 bytes)
+void sps_mem_free_io(phys_addr_t phys_addr, u32 bytes)
{
u32 virt_addr = 0;
iomem_offset = phys_addr - iomem_phys;
virt_addr = (u32) iomem_virt + iomem_offset;
- SPS_DBG2("sps:sps_mem_free_io.phys=0x%x.virt=0x%x.size=0x%x.",
- phys_addr, virt_addr, bytes);
+ SPS_DBG2("sps:sps_mem_free_io.phys=%pa.virt=0x%x.size=0x%x.",
+ &phys_addr, virt_addr, bytes);
gen_pool_free(pool, virt_addr, bytes);
total_free += bytes;
@@ -102,7 +102,7 @@
* Initialize driver memory module
*
*/
-int sps_mem_init(u32 pipemem_phys_base, u32 pipemem_size)
+int sps_mem_init(phys_addr_t pipemem_phys_base, u32 pipemem_size)
{
int res;
@@ -125,8 +125,8 @@
}
iomem_offset = 0;
- SPS_DBG("sps:sps_mem_init.iomem_phys=0x%x,iomem_virt=0x%x.",
- iomem_phys, (u32) iomem_virt);
+ SPS_DBG("sps:sps_mem_init.iomem_phys=%pa,iomem_virt=0x%x.",
+ &iomem_phys, (u32) iomem_virt);
}
pool = gen_pool_create(min_alloc_order, nid);
diff --git a/drivers/platform/msm/sps/sps_rm.c b/drivers/platform/msm/sps/sps_rm.c
index 2b46203..7d7e1a6 100644
--- a/drivers/platform/msm/sps/sps_rm.c
+++ b/drivers/platform/msm/sps/sps_rm.c
@@ -499,8 +499,8 @@
map->desc.phys_base = map->alloc_desc_base;
map->desc.base = spsi_get_mem_ptr(map->desc.phys_base);
if (map->desc.base == NULL) {
- SPS_ERR("sps:Cannot get virt addr for I/O buffer:0x%x",
- map->desc.phys_base);
+ SPS_ERR("sps:Cannot get virt addr for I/O buffer:%pa",
+ &map->desc.phys_base);
goto exit_err;
}
}
@@ -516,8 +516,8 @@
map->data.phys_base = map->alloc_data_base;
map->data.base = spsi_get_mem_ptr(map->data.phys_base);
if (map->data.base == NULL) {
- SPS_ERR("sps:Cannot get virt addr for I/O buffer:0x%x",
- map->data.phys_base);
+ SPS_ERR("sps:Cannot get virt addr for I/O buffer:%pa",
+ &map->data.phys_base);
goto exit_err;
}
}
diff --git a/drivers/platform/msm/sps/spsi.h b/drivers/platform/msm/sps/spsi.h
index 8da3b40..f65fef7 100644
--- a/drivers/platform/msm/sps/spsi.h
+++ b/drivers/platform/msm/sps/spsi.h
@@ -27,6 +27,12 @@
#include "sps_map.h"
+#ifdef CONFIG_ARM_LPAE
+#define SPS_LPAE (true)
+#else
+#define SPS_LPAE (false)
+#endif
+
#define BAM_MAX_PIPES 31
#define BAM_MAX_P_LOCK_GROUP_NUM 31
@@ -43,6 +49,7 @@
#define MAX_MSG_LEN 80
extern u32 d_type;
+extern bool enhd_pipe;
#ifdef CONFIG_DEBUG_FS
extern u8 debugfs_record_enabled;
@@ -165,8 +172,9 @@
/* Dynamically allocated resouces, if required */
u32 alloc_src_pipe; /* Source pipe index */
u32 alloc_dest_pipe; /* Destination pipe index */
- u32 alloc_desc_base; /* Physical address of descriptor FIFO */
- u32 alloc_data_base; /* Physical address of data FIFO */
+ /* Physical address of descriptor FIFO */
+ phys_addr_t alloc_desc_base;
+ phys_addr_t alloc_data_base; /* Physical address of data FIFO */
};
/* Event bookkeeping descriptor struct */
@@ -218,7 +226,7 @@
* @return virtual memory pointer
*
*/
-void *spsi_get_mem_ptr(u32 phys_addr);
+void *spsi_get_mem_ptr(phys_addr_t phys_addr);
/**
* Allocate I/O (pipe) memory
@@ -229,7 +237,7 @@
*
* @return physical address of allocated memory, or SPS_ADDR_INVALID on error
*/
-u32 sps_mem_alloc_io(u32 bytes);
+phys_addr_t sps_mem_alloc_io(u32 bytes);
/**
* Free I/O (pipe) memory
@@ -240,7 +248,7 @@
*
* @bytes - number of bytes to free.
*/
-void sps_mem_free_io(u32 phys_addr, u32 bytes);
+void sps_mem_free_io(phys_addr_t phys_addr, u32 bytes);
/**
* Find matching connection mapping
@@ -324,7 +332,7 @@
* @return 0 on success, negative value on error
*
*/
-int sps_mem_init(u32 pipemem_phys_base, u32 pipemem_size);
+int sps_mem_init(phys_addr_t pipemem_phys_base, u32 pipemem_size);
/**
* De-initialize driver memory module
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index bb2879b..db6fec9 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -264,7 +264,7 @@
*
* Returns 0 on success otherwise negative errno.
*/
-static int dwc3_event_buffers_setup(struct dwc3 *dwc)
+int dwc3_event_buffers_setup(struct dwc3 *dwc)
{
struct dwc3_event_buffer *evt;
int n;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 5db7420..2064c13 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -920,6 +920,7 @@
void dwc3_gadget_restart(struct dwc3 *dwc);
void dwc3_post_host_reset_core_init(struct dwc3 *dwc);
+int dwc3_event_buffers_setup(struct dwc3 *dwc);
extern int dwc3_get_device_id(void);
extern void dwc3_put_device_id(int id);
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 63698de..acda980 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -43,6 +43,7 @@
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <linux/ratelimit.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/list.h>
@@ -1487,10 +1488,12 @@
return 0;
}
+#define DWC3_SOFT_RESET_TIMEOUT 10 /* 10 msec */
static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on)
{
u32 reg;
u32 timeout = 500;
+ ktime_t start, diff;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
if (is_on) {
@@ -1501,6 +1504,29 @@
if (dwc->revision >= DWC3_REVISION_194A)
reg &= ~DWC3_DCTL_KEEP_CONNECT;
+
+ start = ktime_get();
+ /* issue device SoftReset */
+ dwc3_writel(dwc->regs, DWC3_DCTL, reg | DWC3_DCTL_CSFTRST);
+ do {
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ if (!(reg & DWC3_DCTL_CSFTRST))
+ break;
+
+ diff = ktime_sub(ktime_get(), start);
+ /* poll for max. 10ms */
+ if (ktime_to_ms(diff) > DWC3_SOFT_RESET_TIMEOUT) {
+ printk_ratelimited(KERN_ERR
+ "%s:core Reset Timed Out\n", __func__);
+ break;
+ }
+ cpu_relax();
+ } while (true);
+
+
+ dwc3_event_buffers_setup(dwc);
+ dwc3_gadget_restart(dwc);
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
reg |= DWC3_DCTL_RUN_STOP;
} else {
reg &= ~DWC3_DCTL_RUN_STOP;
@@ -1754,6 +1780,7 @@
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
dep = dwc->eps[0];
+ dep->endpoint.maxburst = 1;
ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false);
if (ret) {
dev_err(dwc->dev, "failed to enable %s\n", dep->name);
@@ -1761,6 +1788,7 @@
}
dep = dwc->eps[1];
+ dep->endpoint.maxburst = 1;
ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false);
if (ret) {
dev_err(dwc->dev, "failed to enable %s\n", dep->name);
diff --git a/drivers/usb/gadget/u_ctrl_hsuart.c b/drivers/usb/gadget/u_ctrl_hsuart.c
index a9bd53e..3443d12 100644
--- a/drivers/usb/gadget/u_ctrl_hsuart.c
+++ b/drivers/usb/gadget/u_ctrl_hsuart.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -18,11 +18,13 @@
#include <linux/termios.h>
#include <linux/debugfs.h>
#include <linux/smux.h>
+#include <linux/completion.h>
#include <mach/usb_gadget_xport.h>
#define CH_OPENED 0
#define CH_READY 1
+#define CH_CONNECTED 2
static unsigned int num_ctrl_ports;
@@ -37,6 +39,7 @@
enum gadget_type gtype;
spinlock_t port_lock;
void *port_usb;
+ struct completion close_complete;
/* work queue*/
struct workqueue_struct *wq;
struct work_struct connect_w;
@@ -74,6 +77,10 @@
size_t len;
switch (event_type) {
+ case SMUX_LOCAL_CLOSED:
+ clear_bit(CH_OPENED, &port->channel_sts);
+ complete(&port->close_complete);
+ break;
case SMUX_CONNECTED:
spin_lock_irqsave(&port->port_lock, flags);
if (!port->port_usb) {
@@ -81,7 +88,7 @@
return;
}
spin_unlock_irqrestore(&port->port_lock, flags);
- set_bit(CH_OPENED, &port->channel_sts);
+ set_bit(CH_CONNECTED, &port->channel_sts);
if (port->gtype == USB_GADGET_RMNET) {
gr = port->port_usb;
if (gr && gr->connect)
@@ -89,7 +96,7 @@
}
break;
case SMUX_DISCONNECTED:
- clear_bit(CH_OPENED, &port->channel_sts);
+ clear_bit(CH_CONNECTED, &port->channel_sts);
break;
case SMUX_READ_DONE:
len = ((struct smux_meta_read *)metadata)->len;
@@ -163,7 +170,7 @@
return -ENODEV;
}
/* drop cpkt if ch is not open */
- if (!test_bit(CH_OPENED, &port->channel_sts)) {
+ if (!test_bit(CH_CONNECTED, &port->channel_sts)) {
port->drp_cpkt_cnt++;
return 0;
}
@@ -209,7 +216,7 @@
port->cbits_tomodem = cbits;
- if (!test_bit(CH_OPENED, &port->channel_sts))
+ if (!test_bit(CH_CONNECTED, &port->channel_sts))
return;
pr_debug("%s: ctrl_tomodem:%d\n", __func__, cbits);
@@ -228,12 +235,21 @@
pr_debug("%s: port:%p\n", __func__, port);
+ if (test_bit(CH_OPENED, &port->channel_sts)) {
+ retval = wait_for_completion_timeout(
+ &port->close_complete, 3 * HZ);
+ if (retval == 0) {
+ pr_err("%s: smux close timedout\n", __func__);
+ return;
+ }
+ }
retval = msm_smux_open(port->ch_id, port->ctxt, smux_control_event,
rx_control_buffer);
if (retval < 0) {
pr_err(" %s smux_open failed\n", __func__);
return;
}
+ set_bit(CH_OPENED, &port->channel_sts);
}
@@ -283,8 +299,9 @@
if (!test_bit(CH_OPENED, &port->channel_sts))
return;
+ INIT_COMPLETION(port->close_complete);
msm_smux_close(port->ch_id);
- clear_bit(CH_OPENED, &port->channel_sts);
+ clear_bit(CH_CONNECTED, &port->channel_sts);
}
void ghsuart_ctrl_disconnect(void *gptr, int port_num)
@@ -363,6 +380,7 @@
gr->disconnect(gr);
clear_bit(CH_OPENED, &port->channel_sts);
+ clear_bit(CH_CONNECTED, &port->channel_sts);
not_ready:
clear_bit(CH_READY, &port->channel_sts);
@@ -403,6 +421,7 @@
spin_lock_init(&port->port_lock);
+ init_completion(&port->close_complete);
INIT_WORK(&port->connect_w, ghsuart_ctrl_connect_w);
INIT_WORK(&port->disconnect_w, ghsuart_ctrl_disconnect_w);
diff --git a/drivers/usb/gadget/u_data_hsuart.c b/drivers/usb/gadget/u_data_hsuart.c
index 8005a4a..c342437 100644
--- a/drivers/usb/gadget/u_data_hsuart.c
+++ b/drivers/usb/gadget/u_data_hsuart.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -20,6 +20,7 @@
#include <linux/debugfs.h>
#include <linux/bitops.h>
#include <linux/smux.h>
+#include <linux/completion.h>
#include <mach/usb_gadget_xport.h>
@@ -72,6 +73,7 @@
#define CH_OPENED 0
#define CH_READY 1
+#define CH_CONNECTED 2
struct ghsuart_data_port {
/* port */
@@ -86,6 +88,7 @@
spinlock_t port_lock;
void *port_usb;
+ struct completion close_complete;
/* data transfer queues */
unsigned int tx_q_size;
struct list_head tx_idle;
@@ -502,8 +505,12 @@
pr_debug("%s: event type: %s ", __func__, event_string(event_type));
switch (event_type) {
+ case SMUX_LOCAL_CLOSED:
+ clear_bit(CH_OPENED, &port->channel_sts);
+ complete(&port->close_complete);
+ break;
case SMUX_CONNECTED:
- set_bit(CH_OPENED, &port->channel_sts);
+ set_bit(CH_CONNECTED, &port->channel_sts);
if (port->gtype == USB_GADGET_SERIAL) {
cbits = msm_smux_tiocm_get(port->ch_id);
if (cbits & ACM_CTRL_DCD) {
@@ -515,7 +522,7 @@
ghsuart_data_start_io(port);
break;
case SMUX_DISCONNECTED:
- clear_bit(CH_OPENED, &port->channel_sts);
+ clear_bit(CH_CONNECTED, &port->channel_sts);
break;
case SMUX_READ_DONE:
skb = meta_read->pkt_priv;
@@ -589,6 +596,14 @@
pr_debug("%s: port:%p\n", __func__, port);
+ if (test_bit(CH_OPENED, &port->channel_sts)) {
+ ret = wait_for_completion_timeout(
+ &port->close_complete, 3 * HZ);
+ if (ret == 0) {
+ pr_err("%s: smux close timedout\n", __func__);
+ return;
+ }
+ }
ret = msm_smux_open(port->ch_id, port, &ghsuart_notify_event,
&ghsuart_get_rx_buffer);
if (ret) {
@@ -596,6 +611,7 @@
__func__, port->ch_id, ret);
return;
}
+ set_bit(CH_OPENED, &port->channel_sts);
}
static void ghsuart_data_disconnect_w(struct work_struct *w)
@@ -606,8 +622,9 @@
if (!test_bit(CH_OPENED, &port->channel_sts))
return;
+ INIT_COMPLETION(port->close_complete);
msm_smux_close(port->ch_id);
- clear_bit(CH_OPENED, &port->channel_sts);
+ clear_bit(CH_CONNECTED, &port->channel_sts);
}
static void ghsuart_data_free_buffers(struct ghsuart_data_port *port)
@@ -710,6 +727,7 @@
clear_bit(CH_READY, &port->channel_sts);
clear_bit(CH_OPENED, &port->channel_sts);
+ clear_bit(CH_CONNECTED, &port->channel_sts);
return 0;
}
@@ -747,7 +765,7 @@
port->cbits_tomodem = cbits;
- if (!test_bit(CH_OPENED, &port->channel_sts))
+ if (!test_bit(CH_CONNECTED, &port->channel_sts))
return;
/* if DTR is high, update latest modem info to Host */
@@ -786,6 +804,7 @@
spin_lock_init(&port->rx_lock);
spin_lock_init(&port->tx_lock);
+ init_completion(&port->close_complete);
INIT_WORK(&port->connect_w, ghsuart_data_connect_w);
INIT_WORK(&port->disconnect_w, ghsuart_data_disconnect_w);
INIT_WORK(&port->write_tohost_w, ghsuart_data_write_tohost);
@@ -994,6 +1013,7 @@
"#PORT:%d port#: %p\n"
"data_ch_open: %d\n"
"data_ch_ready: %d\n"
+ "data_ch_connected: %d\n"
"\n******UL INFO*****\n\n"
"dpkts_to_modem: %lu\n"
"tomodem_drp_cnt: %u\n"
@@ -1003,6 +1023,7 @@
i, port,
test_bit(CH_OPENED, &port->channel_sts),
test_bit(CH_READY, &port->channel_sts),
+ test_bit(CH_CONNECTED, &port->channel_sts),
port->to_modem,
port->tomodem_drp_cnt,
port->rx_skb_q.qlen,
diff --git a/drivers/video/msm/mdss/mdss_dsi.c b/drivers/video/msm/mdss/mdss_dsi.c
index 44a5e62..3b0cd20 100644
--- a/drivers/video/msm/mdss/mdss_dsi.c
+++ b/drivers/video/msm/mdss/mdss_dsi.c
@@ -31,9 +31,7 @@
static int mdss_dsi_regulator_init(struct platform_device *pdev)
{
- int ret = 0;
struct mdss_dsi_ctrl_pdata *ctrl_pdata = NULL;
- struct dsi_drv_cm_data *dsi_drv = NULL;
if (!pdev) {
pr_err("%s: invalid input\n", __func__);
@@ -46,59 +44,9 @@
return -EINVAL;
}
- dsi_drv = &(ctrl_pdata->shared_pdata);
- if (ctrl_pdata->power_data.num_vreg > 0) {
- ret = msm_dss_config_vreg(&pdev->dev,
- ctrl_pdata->power_data.vreg_config,
- ctrl_pdata->power_data.num_vreg, 1);
- } else {
- dsi_drv->vdd_vreg = devm_regulator_get(&pdev->dev, "vdd");
- if (IS_ERR(dsi_drv->vdd_vreg)) {
- pr_err("%s: could not get vdda vreg, rc=%ld\n",
- __func__, PTR_ERR(dsi_drv->vdd_vreg));
- return PTR_ERR(dsi_drv->vdd_vreg);
- }
-
- ret = regulator_set_voltage(dsi_drv->vdd_vreg, 3000000,
- 3000000);
- if (ret) {
- pr_err("%s: set voltage failed on vdda vreg, rc=%d\n",
- __func__, ret);
- return ret;
- }
-
- dsi_drv->vdd_io_vreg = devm_regulator_get(&pdev->dev, "vddio");
- if (IS_ERR(dsi_drv->vdd_io_vreg)) {
- pr_err("%s: could not get vddio reg, rc=%ld\n",
- __func__, PTR_ERR(dsi_drv->vdd_io_vreg));
- return PTR_ERR(dsi_drv->vdd_io_vreg);
- }
-
- ret = regulator_set_voltage(dsi_drv->vdd_io_vreg, 1800000,
- 1800000);
- if (ret) {
- pr_err("%s: set voltage failed on vddio vreg, rc=%d\n",
- __func__, ret);
- return ret;
- }
-
- dsi_drv->vdda_vreg = devm_regulator_get(&pdev->dev, "vdda");
- if (IS_ERR(dsi_drv->vdda_vreg)) {
- pr_err("%s: could not get vdda vreg, rc=%ld\n",
- __func__, PTR_ERR(dsi_drv->vdda_vreg));
- return PTR_ERR(dsi_drv->vdda_vreg);
- }
-
- ret = regulator_set_voltage(dsi_drv->vdda_vreg, 1200000,
- 1200000);
- if (ret) {
- pr_err("%s: set voltage failed on vdda vreg, rc=%d\n",
- __func__, ret);
- return ret;
- }
- }
-
- return 0;
+ return msm_dss_config_vreg(&pdev->dev,
+ ctrl_pdata->power_data.vreg_config,
+ ctrl_pdata->power_data.num_vreg, 1);
}
static int mdss_dsi_panel_power_on(struct mdss_panel_data *pdata, int enable)
@@ -108,7 +56,8 @@
if (pdata == NULL) {
pr_err("%s: Invalid input data\n", __func__);
- return -EINVAL;
+ ret = -EINVAL;
+ goto error;
}
ctrl_pdata = container_of(pdata, struct mdss_dsi_ctrl_pdata,
@@ -116,71 +65,13 @@
pr_debug("%s: enable=%d\n", __func__, enable);
if (enable) {
- if (ctrl_pdata->power_data.num_vreg > 0) {
- ret = msm_dss_enable_vreg(
- ctrl_pdata->power_data.vreg_config,
- ctrl_pdata->power_data.num_vreg, 1);
- if (ret) {
- pr_err("%s:Failed to enable regulators.rc=%d\n",
- __func__, ret);
- return ret;
- }
-
- /*
- * A small delay is needed here after enabling
- * all regulators and before issuing panel reset
- */
- msleep(20);
- } else {
- ret = regulator_set_optimum_mode(
- (ctrl_pdata->shared_pdata).vdd_vreg, 100000);
- if (ret < 0) {
- pr_err("%s: vdd_vreg set opt mode failed.\n",
- __func__);
- return ret;
- }
-
- ret = regulator_set_optimum_mode(
- (ctrl_pdata->shared_pdata).vdd_io_vreg, 100000);
- if (ret < 0) {
- pr_err("%s: vdd_io_vreg set opt mode failed.\n",
- __func__);
- return ret;
- }
-
- ret = regulator_set_optimum_mode
- ((ctrl_pdata->shared_pdata).vdda_vreg, 100000);
- if (ret < 0) {
- pr_err("%s: vdda_vreg set opt mode failed.\n",
- __func__);
- return ret;
- }
-
- ret = regulator_enable(
- (ctrl_pdata->shared_pdata).vdd_io_vreg);
- if (ret) {
- pr_err("%s: Failed to enable regulator.\n",
- __func__);
- return ret;
- }
- msleep(20);
-
- ret = regulator_enable(
- (ctrl_pdata->shared_pdata).vdd_vreg);
- if (ret) {
- pr_err("%s: Failed to enable regulator.\n",
- __func__);
- return ret;
- }
- msleep(20);
-
- ret = regulator_enable(
- (ctrl_pdata->shared_pdata).vdda_vreg);
- if (ret) {
- pr_err("%s: Failed to enable regulator.\n",
- __func__);
- return ret;
- }
+ ret = msm_dss_enable_vreg(
+ ctrl_pdata->power_data.vreg_config,
+ ctrl_pdata->power_data.num_vreg, 1);
+ if (ret) {
+ pr_err("%s:Failed to enable vregs.rc=%d\n",
+ __func__, ret);
+ goto error;
}
if (pdata->panel_info.panel_power_on == 0)
@@ -190,65 +81,16 @@
mdss_dsi_panel_reset(pdata, 0);
- if (ctrl_pdata->power_data.num_vreg > 0) {
- ret = msm_dss_enable_vreg(
- ctrl_pdata->power_data.vreg_config,
- ctrl_pdata->power_data.num_vreg, 0);
- if (ret) {
- pr_err("%s: Failed to disable regs.rc=%d\n",
- __func__, ret);
- return ret;
- }
- } else {
- ret = regulator_disable(
- (ctrl_pdata->shared_pdata).vdd_vreg);
- if (ret) {
- pr_err("%s: Failed to disable regulator.\n",
- __func__);
- return ret;
- }
-
- ret = regulator_disable(
- (ctrl_pdata->shared_pdata).vdda_vreg);
- if (ret) {
- pr_err("%s: Failed to disable regulator.\n",
- __func__);
- return ret;
- }
-
- ret = regulator_disable(
- (ctrl_pdata->shared_pdata).vdd_io_vreg);
- if (ret) {
- pr_err("%s: Failed to disable regulator.\n",
- __func__);
- return ret;
- }
-
- ret = regulator_set_optimum_mode(
- (ctrl_pdata->shared_pdata).vdd_vreg, 100);
- if (ret < 0) {
- pr_err("%s: vdd_vreg set opt mode failed.\n",
- __func__);
- return ret;
- }
-
- ret = regulator_set_optimum_mode(
- (ctrl_pdata->shared_pdata).vdd_io_vreg, 100);
- if (ret < 0) {
- pr_err("%s: vdd_io_vreg set opt mode failed.\n",
- __func__);
- return ret;
- }
- ret = regulator_set_optimum_mode(
- (ctrl_pdata->shared_pdata).vdda_vreg, 100);
- if (ret < 0) {
- pr_err("%s: vdda_vreg set opt mode failed.\n",
- __func__);
- return ret;
- }
+ ret = msm_dss_enable_vreg(
+ ctrl_pdata->power_data.vreg_config,
+ ctrl_pdata->power_data.num_vreg, 0);
+ if (ret) {
+ pr_err("%s: Failed to disable vregs.rc=%d\n",
+ __func__, ret);
}
}
- return 0;
+error:
+ return ret;
}
static void mdss_dsi_put_dt_vreg_data(struct device *dev,
@@ -269,10 +111,9 @@
static int mdss_dsi_get_dt_vreg_data(struct device *dev,
struct dss_module_power *mp)
{
- int i, rc = 0;
- int dt_vreg_total = 0;
- u32 *val_array = NULL;
- struct device_node *of_node = NULL;
+ int i = 0, rc = 0;
+ u32 tmp = 0;
+ struct device_node *of_node = NULL, *supply_node = NULL;
if (!dev || !mp) {
pr_err("%s: invalid input\n", __func__);
@@ -283,94 +124,131 @@
of_node = dev->of_node;
mp->num_vreg = 0;
- dt_vreg_total = of_property_count_strings(of_node, "qcom,supply-names");
- if (dt_vreg_total < 0) {
- pr_debug("%s: vreg not found. rc=%d\n", __func__,
- dt_vreg_total);
- rc = 0;
- goto error;
- } else {
- pr_debug("%s: vreg found. count=%d\n", __func__, dt_vreg_total);
+ for_each_child_of_node(of_node, supply_node) {
+ if (!strncmp(supply_node->name, "qcom,platform-supply-entry",
+ 26))
+ ++mp->num_vreg;
}
-
- if (dt_vreg_total > 0) {
- mp->num_vreg = dt_vreg_total;
- mp->vreg_config = devm_kzalloc(dev, sizeof(struct dss_vreg) *
- dt_vreg_total, GFP_KERNEL);
- if (!mp->vreg_config) {
- pr_err("%s: can't alloc vreg mem\n", __func__);
- goto error;
- }
- } else {
+ if (mp->num_vreg == 0) {
pr_debug("%s: no vreg\n", __func__);
- return 0;
+ goto novreg;
+ } else {
+ pr_debug("%s: vreg found. count=%d\n", __func__, mp->num_vreg);
}
- val_array = devm_kzalloc(dev, sizeof(u32) * dt_vreg_total, GFP_KERNEL);
- if (!val_array) {
- pr_err("%s: can't allocate vreg scratch mem\n", __func__);
+ mp->vreg_config = devm_kzalloc(dev, sizeof(struct dss_vreg) *
+ mp->num_vreg, GFP_KERNEL);
+ if (!mp->vreg_config) {
+ pr_err("%s: can't alloc vreg mem\n", __func__);
rc = -ENOMEM;
goto error;
}
- for (i = 0; i < dt_vreg_total; i++) {
- const char *st = NULL;
- /* vreg-name */
- rc = of_property_read_string_index(of_node, "qcom,supply-names",
- i, &st);
- if (rc) {
- pr_err("%s: error reading name. i=%d, rc=%d\n",
- __func__, i, rc);
- goto error;
- }
- snprintf(mp->vreg_config[i].vreg_name,
- ARRAY_SIZE((mp->vreg_config[i].vreg_name)), "%s", st);
+ for_each_child_of_node(of_node, supply_node) {
+ if (!strncmp(supply_node->name, "qcom,platform-supply-entry",
+ 26)) {
+ const char *st = NULL;
+ /* vreg-name */
+ rc = of_property_read_string(supply_node,
+ "qcom,supply-name", &st);
+ if (rc) {
+ pr_err("%s: error reading name. rc=%d\n",
+ __func__, rc);
+ goto error;
+ }
+ snprintf(mp->vreg_config[i].vreg_name,
+ ARRAY_SIZE((mp->vreg_config[i].vreg_name)),
+ "%s", st);
+ /* vreg-min-voltage */
+ rc = of_property_read_u32(supply_node,
+ "qcom,supply-min-voltage", &tmp);
+ if (rc) {
+ pr_err("%s: error reading min volt. rc=%d\n",
+ __func__, rc);
+ goto error;
+ }
+ mp->vreg_config[i].min_voltage = tmp;
- /* vreg-min-voltage */
- memset(val_array, 0, sizeof(u32) * dt_vreg_total);
- rc = of_property_read_u32_array(of_node,
- "qcom,supply-min-voltage-level", val_array,
- dt_vreg_total);
- if (rc) {
- pr_err("%s: error reading min volt. rc=%d\n",
- __func__, rc);
- goto error;
- }
- mp->vreg_config[i].min_voltage = val_array[i];
+ /* vreg-max-voltage */
+ rc = of_property_read_u32(supply_node,
+ "qcom,supply-max-voltage", &tmp);
+ if (rc) {
+ pr_err("%s: error reading max volt. rc=%d\n",
+ __func__, rc);
+ goto error;
+ }
+ mp->vreg_config[i].max_voltage = tmp;
- /* vreg-max-voltage */
- memset(val_array, 0, sizeof(u32) * dt_vreg_total);
- rc = of_property_read_u32_array(of_node,
- "qcom,supply-max-voltage-level", val_array,
- dt_vreg_total);
- if (rc) {
- pr_err("%s: error reading max volt. rc=%d\n",
- __func__, rc);
- goto error;
- }
- mp->vreg_config[i].max_voltage = val_array[i];
+ /* enable-load */
+ rc = of_property_read_u32(supply_node,
+ "qcom,supply-enable-load", &tmp);
+ if (rc) {
+ pr_err("%s: error reading enable load. rc=%d\n",
+ __func__, rc);
+ goto error;
+ }
+ mp->vreg_config[i].enable_load = tmp;
- /* vreg-peak-current*/
- memset(val_array, 0, sizeof(u32) * dt_vreg_total);
- rc = of_property_read_u32_array(of_node,
- "qcom,supply-peak-current", val_array,
- dt_vreg_total);
- if (rc) {
- pr_err("%s: error reading peak current. rc=%d\n",
- __func__, rc);
- goto error;
- }
- mp->vreg_config[i].enable_load = val_array[i];
+ /* disable-load */
+ rc = of_property_read_u32(supply_node,
+ "qcom,supply-disable-load", &tmp);
+ if (rc) {
+ pr_err("%s: error reading disable load. rc=%d\n",
+ __func__, rc);
+ goto error;
+ }
+ mp->vreg_config[i].disable_load = tmp;
- pr_debug("%s: %s min=%d, max=%d, pc=%d\n", __func__,
- mp->vreg_config[i].vreg_name,
- mp->vreg_config[i].min_voltage,
- mp->vreg_config[i].max_voltage,
- mp->vreg_config[i].enable_load);
+ /* pre-sleep */
+ rc = of_property_read_u32(supply_node,
+ "qcom,supply-pre-on-sleep", &tmp);
+ if (rc) {
+ pr_debug("%s: error reading supply pre sleep value. rc=%d\n",
+ __func__, rc);
+ }
+ mp->vreg_config[i].pre_on_sleep = (!rc ? tmp : 0);
+
+ rc = of_property_read_u32(supply_node,
+ "qcom,supply-pre-off-sleep", &tmp);
+ if (rc) {
+ pr_debug("%s: error reading supply pre sleep value. rc=%d\n",
+ __func__, rc);
+ }
+ mp->vreg_config[i].pre_off_sleep = (!rc ? tmp : 0);
+
+ /* post-sleep */
+ rc = of_property_read_u32(supply_node,
+ "qcom,supply-post-on-sleep", &tmp);
+ if (rc) {
+ pr_debug("%s: error reading supply post sleep value. rc=%d\n",
+ __func__, rc);
+ }
+ mp->vreg_config[i].post_on_sleep = (!rc ? tmp : 0);
+
+ rc = of_property_read_u32(supply_node,
+ "qcom,supply-post-off-sleep", &tmp);
+ if (rc) {
+ pr_debug("%s: error reading supply post sleep value. rc=%d\n",
+ __func__, rc);
+ }
+ mp->vreg_config[i].post_off_sleep = (!rc ? tmp : 0);
+
+ pr_debug("%s: %s min=%d, max=%d, enable=%d, disable=%d, preonsleep=%d, postonsleep=%d, preoffsleep=%d, postoffsleep=%d\n",
+ __func__,
+ mp->vreg_config[i].vreg_name,
+ mp->vreg_config[i].min_voltage,
+ mp->vreg_config[i].max_voltage,
+ mp->vreg_config[i].enable_load,
+ mp->vreg_config[i].disable_load,
+ mp->vreg_config[i].pre_on_sleep,
+ mp->vreg_config[i].post_on_sleep,
+ mp->vreg_config[i].pre_off_sleep,
+ mp->vreg_config[i].post_off_sleep
+ );
+ ++i;
+ }
}
- devm_kfree(dev, val_array);
-
return rc;
error:
@@ -378,10 +256,9 @@
devm_kfree(dev, mp->vreg_config);
mp->vreg_config = NULL;
}
+novreg:
mp->num_vreg = 0;
- if (val_array)
- devm_kfree(dev, val_array);
return rc;
}
@@ -937,14 +814,14 @@
struct mdss_panel_common_pdata *panel_data)
{
struct mipi_panel_info *mipi;
- int rc;
+ int rc, i, len;
u8 lanes = 0, bpp;
- u32 h_period, v_period, dsi_pclk_rate;
+ u32 h_period, v_period, dsi_pclk_rate, tmp[9];
struct mdss_dsi_ctrl_pdata *ctrl_pdata;
struct device_node *dsi_ctrl_np = NULL;
struct platform_device *ctrl_pdev = NULL;
- bool broadcast;
bool cont_splash_enabled = false;
+ const char *data;
h_period = ((panel_data->panel_info.lcdc.h_pulse_width)
+ (panel_data->panel_info.lcdc.h_back_porch)
@@ -1010,7 +887,7 @@
mipi->dsi_pclk_rate = dsi_pclk_rate;
dsi_ctrl_np = of_parse_phandle(pdev->dev.of_node,
- "qcom,dsi-ctrl-phandle", 0);
+ "qcom,mdss-dsi-panel-controller", 0);
if (!dsi_ctrl_np) {
pr_err("%s: Dsi controller node not initialized\n", __func__);
return -EPROBE_DEFER;
@@ -1031,13 +908,57 @@
return rc;
}
- broadcast = of_property_read_bool(pdev->dev.of_node,
- "qcom,mdss-pan-broadcast-mode");
- if (broadcast)
- ctrl_pdata->shared_pdata.broadcast_enable = 1;
+ data = of_get_property(ctrl_pdev->dev.of_node,
+ "qcom,platform-strength-ctrl", &len);
+ if ((!data) || (len != 2)) {
+ pr_err("%s:%d, Unable to read Phy Strength ctrl settings",
+ __func__, __LINE__);
+ return -EINVAL;
+ }
+ (panel_data->panel_info.mipi.dsi_phy_db)->strength[0] = data[0];
+ (panel_data->panel_info.mipi.dsi_phy_db)->strength[1] = data[1];
- ctrl_pdata->disp_en_gpio = of_get_named_gpio(pdev->dev.of_node,
- "qcom,enable-gpio", 0);
+ data = of_get_property(ctrl_pdev->dev.of_node,
+ "qcom,platform-regulator-settings", &len);
+ if ((!data) || (len != 7)) {
+ pr_err("%s:%d, Unable to read Phy regulator settings",
+ __func__, __LINE__);
+ return -EINVAL;
+ }
+ for (i = 0; i < len; i++) {
+ (panel_data->panel_info.mipi.dsi_phy_db)->regulator[i]
+ = data[i];
+ }
+
+ data = of_get_property(ctrl_pdev->dev.of_node,
+ "qcom,platform-bist-ctrl", &len);
+ if ((!data) || (len != 6)) {
+ pr_err("%s:%d, Unable to read Phy Bist Ctrl settings",
+ __func__, __LINE__);
+ return -EINVAL;
+ }
+ for (i = 0; i < len; i++) {
+ (panel_data->panel_info.mipi.dsi_phy_db)->bistCtrl[i]
+ = data[i];
+ }
+
+ data = of_get_property(ctrl_pdev->dev.of_node,
+ "qcom,platform-lane-config", &len);
+ if ((!data) || (len != 45)) {
+ pr_err("%s:%d, Unable to read Phy lane configure settings",
+ __func__, __LINE__);
+ return -EINVAL;
+ }
+ for (i = 0; i < len; i++) {
+ (panel_data->panel_info.mipi.dsi_phy_db)->laneCfg[i] =
+ data[i];
+ }
+
+ ctrl_pdata->shared_pdata.broadcast_enable = of_property_read_bool(
+ pdev->dev.of_node, "qcom,mdss-dsi-panel-broadcast-mode");
+
+ ctrl_pdata->disp_en_gpio = of_get_named_gpio(ctrl_pdev->dev.of_node,
+ "qcom,platform-enable-gpio", 0);
if (!gpio_is_valid(ctrl_pdata->disp_en_gpio)) {
pr_err("%s:%d, Disp_en gpio not specified\n",
__func__, __LINE__);
@@ -1051,8 +972,8 @@
}
}
- ctrl_pdata->disp_te_gpio = of_get_named_gpio(pdev->dev.of_node,
- "qcom,te-gpio", 0);
+ ctrl_pdata->disp_te_gpio = of_get_named_gpio(ctrl_pdev->dev.of_node,
+ "qcom,platform-te-gpio", 0);
if (!gpio_is_valid(ctrl_pdata->disp_te_gpio)) {
pr_err("%s:%d, Disp_te gpio not specified\n",
__func__, __LINE__);
@@ -1089,9 +1010,17 @@
ctrl_pdata->disp_te_gpio);
}
+ rc = of_property_read_u32_array(ctrl_pdev->dev.of_node,
+ "qcom,platform-reset-sequence", tmp, MDSS_DSI_RST_SEQ_LEN);
+ if (rc)
+ pr_err("%s:%d, unable to read gpio reset sequence\n",
+ __func__, __LINE__);
+ else
+ for (i = 0; i < MDSS_DSI_RST_SEQ_LEN; ++i)
+ ctrl_pdata->rst_seq[i] = tmp[i];
- ctrl_pdata->rst_gpio = of_get_named_gpio(pdev->dev.of_node,
- "qcom,rst-gpio", 0);
+ ctrl_pdata->rst_gpio = of_get_named_gpio(ctrl_pdev->dev.of_node,
+ "qcom,platform-reset-gpio", 0);
if (!gpio_is_valid(ctrl_pdata->rst_gpio)) {
pr_err("%s:%d, reset gpio not specified\n",
__func__, __LINE__);
diff --git a/drivers/video/msm/mdss/mdss_dsi.h b/drivers/video/msm/mdss/mdss_dsi.h
index 8a8e4ca..2603648 100644
--- a/drivers/video/msm/mdss/mdss_dsi.h
+++ b/drivers/video/msm/mdss/mdss_dsi.h
@@ -194,6 +194,8 @@
#define MDSS_DSI_LEN 8 /* 4 x 4 - 6 - 2, bytes dcs header+crc-align */
+#define MDSS_DSI_RST_SEQ_LEN 6
+
struct dsi_buf {
u32 *hdr; /* dsi host header */
char *start; /* buffer start addr */
@@ -346,6 +348,7 @@
u32 pclk_rate;
u32 byte_clk_rate;
struct dss_module_power power_data;
+ int rst_seq[MDSS_DSI_RST_SEQ_LEN];
u32 dsi_irq_mask;
struct mdss_hw *dsi_hw;
diff --git a/drivers/video/msm/mdss/mdss_dsi_panel.c b/drivers/video/msm/mdss/mdss_dsi_panel.c
index 05a84e3..9a019f9 100644
--- a/drivers/video/msm/mdss/mdss_dsi_panel.c
+++ b/drivers/video/msm/mdss/mdss_dsi_panel.c
@@ -158,6 +158,7 @@
void mdss_dsi_panel_reset(struct mdss_panel_data *pdata, int enable)
{
struct mdss_dsi_ctrl_pdata *ctrl_pdata = NULL;
+ int i;
if (pdata == NULL) {
pr_err("%s: Invalid input data\n", __func__);
@@ -181,12 +182,11 @@
pr_debug("%s: enable = %d\n", __func__, enable);
if (enable) {
- gpio_set_value((ctrl_pdata->rst_gpio), 1);
- msleep(20);
- gpio_set_value((ctrl_pdata->rst_gpio), 0);
- udelay(200);
- gpio_set_value((ctrl_pdata->rst_gpio), 1);
- msleep(20);
+ for (i = 0; i < MDSS_DSI_RST_SEQ_LEN; ++i) {
+ gpio_set_value((ctrl_pdata->rst_gpio),
+ ctrl_pdata->rst_seq[i]);
+ msleep(ctrl_pdata->rst_seq[++i]);
+ }
if (gpio_is_valid(ctrl_pdata->disp_en_gpio))
gpio_set_value((ctrl_pdata->disp_en_gpio), 1);
if (ctrl_pdata->ctrl_state & CTRL_STATE_PANEL_INIT) {
@@ -348,11 +348,11 @@
len -= dchdr->dlen;
}
- pcmds->link_state = DSI_LP_MODE; /* default */
-
data = of_get_property(np, link_key, NULL);
- if (!strncmp(data, "DSI_HS_MODE", 11))
+ if (!strncmp(data, "dsi_hs_mode", 11))
pcmds->link_state = DSI_HS_MODE;
+ else
+ pcmds->link_state = DSI_LP_MODE;
pr_debug("%s: dcs_cmd=%x len=%d, cmd_cnt=%d link_state=%d\n", __func__,
pcmds->buf[0], pcmds->blen, pcmds->cmd_cnt, pcmds->link_state);
@@ -361,44 +361,188 @@
}
+static int mdss_panel_dt_get_dst_fmt(u32 bpp, char mipi_mode, u32 pixel_packing,
+ char *dst_format)
+{
+ int rc = 0;
+ switch (bpp) {
+ case 3:
+ *dst_format = DSI_CMD_DST_FORMAT_RGB111;
+ break;
+ case 8:
+ *dst_format = DSI_CMD_DST_FORMAT_RGB332;
+ break;
+ case 12:
+ *dst_format = DSI_CMD_DST_FORMAT_RGB444;
+ break;
+ case 16:
+ switch (mipi_mode) {
+ case DSI_VIDEO_MODE:
+ *dst_format = DSI_VIDEO_DST_FORMAT_RGB565;
+ break;
+ case DSI_CMD_MODE:
+ *dst_format = DSI_CMD_DST_FORMAT_RGB565;
+ break;
+ default:
+ *dst_format = DSI_VIDEO_DST_FORMAT_RGB565;
+ break;
+ }
+ break;
+ case 18:
+ switch (mipi_mode) {
+ case DSI_VIDEO_MODE:
+ if (pixel_packing == 0)
+ *dst_format = DSI_VIDEO_DST_FORMAT_RGB666;
+ else
+ *dst_format = DSI_VIDEO_DST_FORMAT_RGB666_LOOSE;
+ break;
+ case DSI_CMD_MODE:
+ *dst_format = DSI_CMD_DST_FORMAT_RGB666;
+ break;
+ default:
+ if (pixel_packing == 0)
+ *dst_format = DSI_VIDEO_DST_FORMAT_RGB666;
+ else
+ *dst_format = DSI_VIDEO_DST_FORMAT_RGB666_LOOSE;
+ break;
+ }
+ break;
+ case 24:
+ switch (mipi_mode) {
+ case DSI_VIDEO_MODE:
+ *dst_format = DSI_VIDEO_DST_FORMAT_RGB888;
+ break;
+ case DSI_CMD_MODE:
+ *dst_format = DSI_CMD_DST_FORMAT_RGB888;
+ break;
+ default:
+ *dst_format = DSI_VIDEO_DST_FORMAT_RGB888;
+ break;
+ }
+ break;
+ default:
+ rc = -EINVAL;
+ break;
+ }
+ return rc;
+}
+
+
+static int mdss_dsi_parse_fbc_params(struct device_node *np,
+ struct mdss_panel_info *panel_info)
+{
+ int rc, fbc_enabled = 0;
+ u32 tmp;
+
+ fbc_enabled = of_property_read_bool(np, "qcom,mdss-dsi-fbc-enable");
+ if (fbc_enabled) {
+ pr_debug("%s:%d FBC panel enabled.\n", __func__, __LINE__);
+ panel_info->fbc.enabled = 1;
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-fbc-bpp", &tmp);
+ panel_info->fbc.target_bpp = (!rc ? tmp : panel_info->bpp);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-fbc-packing",
+ &tmp);
+ panel_info->fbc.comp_mode = (!rc ? tmp : 0);
+ panel_info->fbc.qerr_enable = of_property_read_bool(np,
+ "qcom,mdss-dsi-fbc-quant-error");
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-fbc-bias", &tmp);
+ panel_info->fbc.cd_bias = (!rc ? tmp : 0);
+ panel_info->fbc.pat_enable = of_property_read_bool(np,
+ "qcom,mdss-dsi-fbc-pat-mode");
+ panel_info->fbc.vlc_enable = of_property_read_bool(np,
+ "qcom,mdss-dsi-fbc-vlc-mode");
+ panel_info->fbc.bflc_enable = of_property_read_bool(np,
+ "qcom,mdss-dsi-fbc-bflc-mode");
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-fbc-h-line-budget",
+ &tmp);
+ panel_info->fbc.line_x_budget = (!rc ? tmp : 0);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-fbc-budget-ctrl",
+ &tmp);
+ panel_info->fbc.block_x_budget = (!rc ? tmp : 0);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-fbc-block-budget",
+ &tmp);
+ panel_info->fbc.block_budget = (!rc ? tmp : 0);
+ rc = of_property_read_u32(np,
+ "qcom,mdss-dsi-fbc-lossless-threshold", &tmp);
+ panel_info->fbc.lossless_mode_thd = (!rc ? tmp : 0);
+ rc = of_property_read_u32(np,
+ "qcom,mdss-dsi-fbc-lossy-threshold", &tmp);
+ panel_info->fbc.lossy_mode_thd = (!rc ? tmp : 0);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-fbc-rgb-threshold",
+ &tmp);
+ panel_info->fbc.lossy_rgb_thd = (!rc ? tmp : 0);
+ rc = of_property_read_u32(np,
+ "qcom,mdss-dsi-fbc-lossy-mode-idx", &tmp);
+ panel_info->fbc.lossy_mode_idx = (!rc ? tmp : 0);
+ } else {
+ pr_debug("%s:%d Panel does not support FBC.\n",
+ __func__, __LINE__);
+ panel_info->fbc.enabled = 0;
+ panel_info->fbc.target_bpp =
+ panel_info->bpp;
+ }
+ return 0;
+}
+
+
static int mdss_panel_parse_dt(struct platform_device *pdev,
- struct mdss_panel_common_pdata *panel_data)
+ struct mdss_panel_common_pdata *panel_data)
{
struct device_node *np = pdev->dev.of_node;
- u32 res[6], tmp;
- u32 fbc_res[7];
+ u32 tmp;
int rc, i, len;
const char *data;
- static const char *bl_ctrl_type, *pdest;
- bool fbc_enabled = false;
+ static const char *pdest;
- rc = of_property_read_u32_array(np, "qcom,mdss-pan-res", res, 2);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-panel-width", &tmp);
if (rc) {
- pr_err("%s:%d, panel resolution not specified\n",
+ pr_err("%s:%d, panel width not specified\n",
__func__, __LINE__);
return -EINVAL;
}
- panel_data->panel_info.xres = (!rc ? res[0] : 640);
- panel_data->panel_info.yres = (!rc ? res[1] : 480);
+ panel_data->panel_info.xres = (!rc ? tmp : 640);
- rc = of_property_read_u32_array(np, "qcom,mdss-pan-active-res", res, 2);
- if (rc == 0) {
- panel_data->panel_info.lcdc.xres_pad =
- panel_data->panel_info.xres - res[0];
- panel_data->panel_info.lcdc.yres_pad =
- panel_data->panel_info.yres - res[1];
- }
-
- rc = of_property_read_u32(np, "qcom,mdss-pan-bpp", &tmp);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-panel-height", &tmp);
if (rc) {
- pr_err("%s:%d, panel bpp not specified\n",
+ pr_err("%s:%d, panel height not specified\n",
__func__, __LINE__);
return -EINVAL;
}
+ panel_data->panel_info.yres = (!rc ? tmp : 480);
+
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-h-left-border", &tmp);
+ panel_data->panel_info.lcdc.xres_pad = (!rc ? tmp : 0);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-h-right-border", &tmp);
+ if (!rc)
+ panel_data->panel_info.lcdc.xres_pad += tmp;
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-v-top-border", &tmp);
+ panel_data->panel_info.lcdc.yres_pad = (!rc ? tmp : 0);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-v-bottom-border", &tmp);
+ if (!rc)
+ panel_data->panel_info.lcdc.yres_pad += tmp;
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-bpp", &tmp);
+ if (rc) {
+ pr_err("%s:%d, bpp not specified\n", __func__, __LINE__);
+ return -EINVAL;
+ }
panel_data->panel_info.bpp = (!rc ? tmp : 24);
-
+ panel_data->panel_info.mipi.mode = DSI_VIDEO_MODE;
+ data = of_get_property(np, "qcom,mdss-dsi-panel-type", NULL);
+ if (data && !strncmp(data, "dsi_cmd_mode", 12))
+ panel_data->panel_info.mipi.mode = DSI_CMD_MODE;
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-pixel-packing", &tmp);
+ tmp = (!rc ? tmp : 0);
+ rc = mdss_panel_dt_get_dst_fmt(panel_data->panel_info.bpp,
+ panel_data->panel_info.mipi.mode, tmp,
+ &(panel_data->panel_info.mipi.dst_format));
+ if (rc) {
+ pr_debug("%s: problem determining dst format. Set Default\n",
+ __func__);
+ panel_data->panel_info.mipi.dst_format =
+ DSI_VIDEO_DST_FORMAT_RGB888;
+ }
pdest = of_get_property(pdev->dev.of_node,
- "qcom,mdss-pan-dest", NULL);
+ "qcom,mdss-dsi-panel-destination", NULL);
if (strlen(pdest) != 9) {
pr_err("%s: Unknown pdest specified\n", __func__);
return -EINVAL;
@@ -412,141 +556,132 @@
__func__);
panel_data->panel_info.pdest = DISPLAY_1;
}
-
- rc = of_property_read_u32_array(np,
- "qcom,mdss-pan-porch-values", res, 6);
- panel_data->panel_info.lcdc.h_back_porch = (!rc ? res[0] : 6);
- panel_data->panel_info.lcdc.h_pulse_width = (!rc ? res[1] : 2);
- panel_data->panel_info.lcdc.h_front_porch = (!rc ? res[2] : 6);
- panel_data->panel_info.lcdc.v_back_porch = (!rc ? res[3] : 6);
- panel_data->panel_info.lcdc.v_pulse_width = (!rc ? res[4] : 2);
- panel_data->panel_info.lcdc.v_front_porch = (!rc ? res[5] : 6);
-
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-h-front-porch", &tmp);
+ panel_data->panel_info.lcdc.h_front_porch = (!rc ? tmp : 6);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-h-back-porch", &tmp);
+ panel_data->panel_info.lcdc.h_back_porch = (!rc ? tmp : 6);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-h-pulse-width", &tmp);
+ panel_data->panel_info.lcdc.h_pulse_width = (!rc ? tmp : 2);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-h-sync-skew", &tmp);
+ panel_data->panel_info.lcdc.hsync_skew = (!rc ? tmp : 0);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-v-back-porch", &tmp);
+ panel_data->panel_info.lcdc.v_back_porch = (!rc ? tmp : 6);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-v-front-porch", &tmp);
+ panel_data->panel_info.lcdc.v_front_porch = (!rc ? tmp : 6);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-v-pulse-width", &tmp);
+ panel_data->panel_info.lcdc.v_pulse_width = (!rc ? tmp : 2);
rc = of_property_read_u32(np,
- "qcom,mdss-pan-underflow-clr", &tmp);
+ "qcom,mdss-dsi-underflow-color", &tmp);
panel_data->panel_info.lcdc.underflow_clr = (!rc ? tmp : 0xff);
-
- bl_ctrl_type = of_get_property(pdev->dev.of_node,
- "qcom,mdss-pan-bl-ctrl", NULL);
- if ((bl_ctrl_type) && (!strncmp(bl_ctrl_type, "bl_ctrl_wled", 12))) {
- led_trigger_register_simple("bkl-trigger", &bl_led_trigger);
- pr_debug("%s: SUCCESS-> WLED TRIGGER register\n", __func__);
-
- panel_data->panel_info.bklt_ctrl = BL_WLED;
- } else if (!strncmp(bl_ctrl_type, "bl_ctrl_pwm", 11)) {
- panel_data->panel_info.bklt_ctrl = BL_PWM;
-
- rc = of_property_read_u32(np, "qcom,pwm-period", &tmp);
- if (rc) {
- pr_err("%s:%d, Error, panel pwm_period\n",
+ rc = of_property_read_u32(np,
+ "qcom,mdss-dsi-border-color", &tmp);
+ panel_data->panel_info.lcdc.border_clr = (!rc ? tmp : 0);
+ panel_data->panel_info.bklt_ctrl = UNKNOWN_CTRL;
+ data = of_get_property(np, "qcom,mdss-dsi-bl-pmic-control-type", NULL);
+ if (data) {
+ if (!strncmp(data, "bl_ctrl_wled", 12)) {
+ led_trigger_register_simple("bkl-trigger",
+ &bl_led_trigger);
+ pr_debug("%s: SUCCESS-> WLED TRIGGER register\n",
+ __func__);
+ panel_data->panel_info.bklt_ctrl = BL_WLED;
+ } else if (!strncmp(data, "bl_ctrl_pwm", 11)) {
+ panel_data->panel_info.bklt_ctrl = BL_PWM;
+ rc = of_property_read_u32(np,
+ "qcom,mdss-dsi-bl-pmic-pwm-frequency", &tmp);
+ if (rc) {
+ pr_err("%s:%d, Error, panel pwm_period\n",
__func__, __LINE__);
- return -EINVAL;
- }
- panel_data->panel_info.pwm_period = tmp;
-
- rc = of_property_read_u32(np, "qcom,pwm-lpg-channel", &tmp);
- if (rc) {
- pr_err("%s:%d, Error, dsi lpg channel\n",
+ return -EINVAL;
+ }
+ panel_data->panel_info.pwm_period = tmp;
+ rc = of_property_read_u32(np,
+ "qcom,mdss-dsi-bl-pmic-bank-select", &tmp);
+ if (rc) {
+ pr_err("%s:%d, Error, dsi lpg channel\n",
__func__, __LINE__);
- return -EINVAL;
+ return -EINVAL;
+ }
+ panel_data->panel_info.pwm_lpg_chan = tmp;
+ tmp = of_get_named_gpio(np,
+ "qcom,mdss-dsi-pwm-gpio", 0);
+ panel_data->panel_info.pwm_pmic_gpio = tmp;
+ } else if (!strncmp(data, "bl_ctrl_dcs", 11)) {
+ panel_data->panel_info.bklt_ctrl = BL_DCS_CMD;
}
- panel_data->panel_info.pwm_lpg_chan = tmp;
-
- tmp = of_get_named_gpio(np, "qcom,pwm-pmic-gpio", 0);
- panel_data->panel_info.pwm_pmic_gpio = tmp;
- } else if (!strncmp(bl_ctrl_type, "bl_ctrl_dcs", 11)) {
- panel_data->panel_info.bklt_ctrl = BL_DCS_CMD;
- } else {
- pr_debug("%s: Unknown backlight control\n", __func__);
- panel_data->panel_info.bklt_ctrl = UNKNOWN_CTRL;
}
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-bl-min-level", &tmp);
+ panel_data->panel_info.bl_min = (!rc ? tmp : 0);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-bl-max-level", &tmp);
+ panel_data->panel_info.bl_max = (!rc ? tmp : 255);
- rc = of_property_read_u32_array(np,
- "qcom,mdss-pan-bl-levels", res, 2);
- panel_data->panel_info.bl_min = (!rc ? res[0] : 0);
- panel_data->panel_info.bl_max = (!rc ? res[1] : 255);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-interleave-mode", &tmp);
+ panel_data->panel_info.mipi.interleave_mode = (!rc ? tmp : 0);
- rc = of_property_read_u32(np, "qcom,mdss-pan-dsi-mode", &tmp);
- panel_data->panel_info.mipi.mode = (!rc ? tmp : DSI_VIDEO_MODE);
-
- rc = of_property_read_u32(np, "qcom,mdss-vsync-enable", &tmp);
- panel_data->panel_info.mipi.vsync_enable = (!rc ? tmp : 0);
-
- rc = of_property_read_u32(np, "qcom,mdss-hw-vsync-mode", &tmp);
- panel_data->panel_info.mipi.hw_vsync_mode = (!rc ? tmp : 0);
-
+ panel_data->panel_info.mipi.vsync_enable = of_property_read_bool(np,
+ "qcom,mdss-dsi-te-check-enable");
+ panel_data->panel_info.mipi.hw_vsync_mode = of_property_read_bool(np,
+ "qcom,mdss-dsi-te-using-te-pin");
rc = of_property_read_u32(np,
- "qcom,mdss-pan-dsi-h-pulse-mode", &tmp);
+ "qcom,mdss-dsi-h-sync-pulse", &tmp);
panel_data->panel_info.mipi.pulse_mode_hsa_he = (!rc ? tmp : false);
- rc = of_property_read_u32_array(np,
- "qcom,mdss-pan-dsi-h-power-stop", res, 3);
- panel_data->panel_info.mipi.hbp_power_stop = (!rc ? res[0] : false);
- panel_data->panel_info.mipi.hsa_power_stop = (!rc ? res[1] : false);
- panel_data->panel_info.mipi.hfp_power_stop = (!rc ? res[2] : false);
-
- rc = of_property_read_u32_array(np,
- "qcom,mdss-pan-dsi-bllp-power-stop", res, 2);
- panel_data->panel_info.mipi.bllp_power_stop =
- (!rc ? res[0] : false);
- panel_data->panel_info.mipi.eof_bllp_power_stop =
- (!rc ? res[1] : false);
-
+ panel_data->panel_info.mipi.hfp_power_stop = of_property_read_bool(np,
+ "qcom,mdss-dsi-hfp-power-mode");
+ panel_data->panel_info.mipi.hsa_power_stop = of_property_read_bool(np,
+ "qcom,mdss-dsi-hsa-power-mode");
+ panel_data->panel_info.mipi.hbp_power_stop = of_property_read_bool(np,
+ "qcom,mdss-dsi-hbp-power-mode");
+ panel_data->panel_info.mipi.bllp_power_stop = of_property_read_bool(np,
+ "qcom,mdss-dsi-bllp-power-mode");
+ panel_data->panel_info.mipi.eof_bllp_power_stop = of_property_read_bool(
+ np, "qcom,mdss-dsi-bllp-eof-power-mode");
rc = of_property_read_u32(np,
- "qcom,mdss-pan-dsi-traffic-mode", &tmp);
+ "qcom,mdss-dsi-traffic-mode", &tmp);
panel_data->panel_info.mipi.traffic_mode =
(!rc ? tmp : DSI_NON_BURST_SYNCH_PULSE);
-
rc = of_property_read_u32(np,
- "qcom,mdss-pan-insert-dcs-cmd", &tmp);
+ "qcom,mdss-dsi-te-dcs-command", &tmp);
panel_data->panel_info.mipi.insert_dcs_cmd =
(!rc ? tmp : 1);
-
rc = of_property_read_u32(np,
- "qcom,mdss-pan-wr-mem-continue", &tmp);
+ "qcom,mdss-dsi-te-v-sync-continue-lines", &tmp);
panel_data->panel_info.mipi.wr_mem_continue =
(!rc ? tmp : 0x3c);
-
rc = of_property_read_u32(np,
- "qcom,mdss-pan-wr-mem-start", &tmp);
+ "qcom,mdss-dsi-te-v-sync-rd-ptr-irq-line", &tmp);
panel_data->panel_info.mipi.wr_mem_start =
(!rc ? tmp : 0x2c);
-
rc = of_property_read_u32(np,
- "qcom,mdss-pan-te-sel", &tmp);
+ "qcom,mdss-dsi-te-pin-select", &tmp);
panel_data->panel_info.mipi.te_sel =
(!rc ? tmp : 1);
-
- rc = of_property_read_u32(np,
- "qcom,mdss-pan-dsi-dst-format", &tmp);
- panel_data->panel_info.mipi.dst_format =
- (!rc ? tmp : DSI_VIDEO_DST_FORMAT_RGB888);
-
- rc = of_property_read_u32(np, "qcom,mdss-pan-dsi-vc", &tmp);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-virtual-channel-id", &tmp);
panel_data->panel_info.mipi.vc = (!rc ? tmp : 0);
-
- rc = of_property_read_u32(np, "qcom,mdss-pan-dsi-rgb-swap", &tmp);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-color-order", &tmp);
panel_data->panel_info.mipi.rgb_swap = (!rc ? tmp : DSI_RGB_SWAP_RGB);
+ panel_data->panel_info.mipi.data_lane0 = of_property_read_bool(np,
+ "qcom,mdss-dsi-lane-0-state");
+ panel_data->panel_info.mipi.data_lane1 = of_property_read_bool(np,
+ "qcom,mdss-dsi-lane-1-state");
+ panel_data->panel_info.mipi.data_lane2 = of_property_read_bool(np,
+ "qcom,mdss-dsi-lane-2-state");
+ panel_data->panel_info.mipi.data_lane3 = of_property_read_bool(np,
+ "qcom,mdss-dsi-lane-3-state");
- rc = of_property_read_u32_array(np,
- "qcom,mdss-pan-dsi-data-lanes", res, 4);
- panel_data->panel_info.mipi.data_lane0 = (!rc ? res[0] : true);
- panel_data->panel_info.mipi.data_lane1 = (!rc ? res[1] : false);
- panel_data->panel_info.mipi.data_lane2 = (!rc ? res[2] : false);
- panel_data->panel_info.mipi.data_lane3 = (!rc ? res[3] : false);
-
- rc = of_property_read_u32(np, "qcom,mdss-pan-dsi-dlane-swap", &tmp);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-lane-map", &tmp);
panel_data->panel_info.mipi.dlane_swap = (!rc ? tmp : 0);
- rc = of_property_read_u32_array(np, "qcom,mdss-pan-dsi-t-clk", res, 2);
- panel_data->panel_info.mipi.t_clk_pre = (!rc ? res[0] : 0x24);
- panel_data->panel_info.mipi.t_clk_post = (!rc ? res[1] : 0x03);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-t-clk-pre", &tmp);
+ panel_data->panel_info.mipi.t_clk_pre = (!rc ? tmp : 0x24);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-t-clk-post", &tmp);
+ panel_data->panel_info.mipi.t_clk_post = (!rc ? tmp : 0x03);
- rc = of_property_read_u32(np, "qcom,mdss-pan-dsi-stream", &tmp);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-stream", &tmp);
panel_data->panel_info.mipi.stream = (!rc ? tmp : 0);
- rc = of_property_read_u32(np, "qcom,mdss-pan-dsi-mdp-tr", &tmp);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-mdp-trigger", &tmp);
panel_data->panel_info.mipi.mdp_trigger =
(!rc ? tmp : DSI_CMD_TRIGGER_SW);
if (panel_data->panel_info.mipi.mdp_trigger > 6) {
@@ -556,7 +691,7 @@
DSI_CMD_TRIGGER_SW;
}
- rc = of_property_read_u32(np, "qcom,mdss-pan-dsi-dma-tr", &tmp);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-dma-trigger", &tmp);
panel_data->panel_info.mipi.dma_trigger =
(!rc ? tmp : DSI_CMD_TRIGGER_SW);
if (panel_data->panel_info.mipi.dma_trigger > 6) {
@@ -565,23 +700,11 @@
panel_data->panel_info.mipi.dma_trigger =
DSI_CMD_TRIGGER_SW;
}
-
- rc = of_property_read_u32(np, "qcom,mdss-pan-dsi-frame-rate", &tmp);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-panel-frame-rate", &tmp);
panel_data->panel_info.mipi.frame_rate = (!rc ? tmp : 60);
-
- rc = of_property_read_u32(np, "qcom,mdss-pan-clk-rate", &tmp);
+ rc = of_property_read_u32(np, "qcom,mdss-dsi-panel-clock-rate", &tmp);
panel_data->panel_info.clk_rate = (!rc ? tmp : 0);
-
- data = of_get_property(np, "qcom,panel-phy-regulatorSettings", &len);
- if ((!data) || (len != 7)) {
- pr_err("%s:%d, Unable to read Phy regulator settings",
- __func__, __LINE__);
- goto error;
- }
- for (i = 0; i < len; i++)
- phy_params.regulator[i] = data[i];
-
- data = of_get_property(np, "qcom,panel-phy-timingSettings", &len);
+ data = of_get_property(np, "qcom,mdss-dsi-panel-timings", &len);
if ((!data) || (len != 12)) {
pr_err("%s:%d, Unable to read Phy timing settings",
__func__, __LINE__);
@@ -590,87 +713,15 @@
for (i = 0; i < len; i++)
phy_params.timing[i] = data[i];
- data = of_get_property(np, "qcom,panel-phy-strengthCtrl", &len);
- if ((!data) || (len != 2)) {
- pr_err("%s:%d, Unable to read Phy Strength ctrl settings",
- __func__, __LINE__);
- goto error;
- }
- phy_params.strength[0] = data[0];
- phy_params.strength[1] = data[1];
-
- data = of_get_property(np, "qcom,panel-phy-bistCtrl", &len);
- if ((!data) || (len != 6)) {
- pr_err("%s:%d, Unable to read Phy Bist Ctrl settings",
- __func__, __LINE__);
- goto error;
- }
- for (i = 0; i < len; i++)
- phy_params.bistCtrl[i] = data[i];
-
- data = of_get_property(np, "qcom,panel-phy-laneConfig", &len);
- if ((!data) || (len != 45)) {
- pr_err("%s:%d, Unable to read Phy lane configure settings",
- __func__, __LINE__);
- goto error;
- }
- for (i = 0; i < len; i++)
- phy_params.laneCfg[i] = data[i];
-
panel_data->panel_info.mipi.dsi_phy_db = &phy_params;
- fbc_enabled = of_property_read_bool(np,
- "qcom,fbc-enabled");
- if (fbc_enabled) {
- pr_debug("%s:%d FBC panel enabled.\n", __func__, __LINE__);
- panel_data->panel_info.fbc.enabled = 1;
-
- rc = of_property_read_u32_array(np,
- "qcom,fbc-mode", fbc_res, 7);
- panel_data->panel_info.fbc.target_bpp =
- (!rc ? fbc_res[0] : panel_data->panel_info.bpp);
- panel_data->panel_info.fbc.comp_mode = (!rc ? fbc_res[1] : 0);
- panel_data->panel_info.fbc.qerr_enable =
- (!rc ? fbc_res[2] : 0);
- panel_data->panel_info.fbc.cd_bias = (!rc ? fbc_res[3] : 0);
- panel_data->panel_info.fbc.pat_enable = (!rc ? fbc_res[4] : 0);
- panel_data->panel_info.fbc.vlc_enable = (!rc ? fbc_res[5] : 0);
- panel_data->panel_info.fbc.bflc_enable =
- (!rc ? fbc_res[6] : 0);
-
- rc = of_property_read_u32_array(np,
- "qcom,fbc-budget-ctl", fbc_res, 3);
- panel_data->panel_info.fbc.line_x_budget =
- (!rc ? fbc_res[0] : 0);
- panel_data->panel_info.fbc.block_x_budget =
- (!rc ? fbc_res[1] : 0);
- panel_data->panel_info.fbc.block_budget =
- (!rc ? fbc_res[2] : 0);
-
- rc = of_property_read_u32_array(np,
- "qcom,fbc-lossy-mode", fbc_res, 4);
- panel_data->panel_info.fbc.lossless_mode_thd =
- (!rc ? fbc_res[0] : 0);
- panel_data->panel_info.fbc.lossy_mode_thd =
- (!rc ? fbc_res[1] : 0);
- panel_data->panel_info.fbc.lossy_rgb_thd =
- (!rc ? fbc_res[2] : 0);
- panel_data->panel_info.fbc.lossy_mode_idx =
- (!rc ? fbc_res[3] : 0);
-
- } else {
- pr_debug("%s:%d Panel does not support FBC.\n",
- __func__, __LINE__);
- panel_data->panel_info.fbc.enabled = 0;
- panel_data->panel_info.fbc.target_bpp =
- panel_data->panel_info.bpp;
- }
+ mdss_dsi_parse_fbc_params(np, &panel_data->panel_info);
mdss_dsi_parse_dcs_cmds(np, &panel_data->on_cmds,
- "qcom,panel-on-cmds", "qcom,on-cmds-dsi-state");
+ "qcom,mdss-dsi-on-command", "qcom,mdss-dsi-on-command-state");
mdss_dsi_parse_dcs_cmds(np, &panel_data->off_cmds,
- "qcom,panel-off-cmds", "qcom,off-cmds-dsi-state");
+ "qcom,mdss-dsi-off-command", "qcom,mdss-dsi-off-command-state");
return 0;
@@ -683,12 +734,12 @@
int rc = 0;
static struct mdss_panel_common_pdata vendor_pdata;
static const char *panel_name;
-
pr_debug("%s:%d, debug info id=%d", __func__, __LINE__, pdev->id);
if (!pdev->dev.of_node)
return -ENODEV;
- panel_name = of_get_property(pdev->dev.of_node, "label", NULL);
+ panel_name = of_get_property(pdev->dev.of_node,
+ "qcom,mdss-dsi-panel-name", NULL);
if (!panel_name)
pr_info("%s:%d, panel name not specified\n",
__func__, __LINE__);
diff --git a/drivers/video/msm/mdss/mdss_mdp.h b/drivers/video/msm/mdss/mdss_mdp.h
index 950fd27..aba77e3 100644
--- a/drivers/video/msm/mdss/mdss_mdp.h
+++ b/drivers/video/msm/mdss/mdss_mdp.h
@@ -579,6 +579,10 @@
struct mdss_mdp_ctl *mdss_mdp_ctl_mixer_switch(struct mdss_mdp_ctl *ctl,
u32 return_type);
+int mdss_mdp_wb_set_format(struct msm_fb_data_type *mfd, int dst_format);
+int mdss_mdp_wb_get_format(struct msm_fb_data_type *mfd,
+ struct mdp_mixer_cfg *mixer_cfg);
+
#define mfd_to_mdp5_data(mfd) (mfd->mdp.private1)
#define mfd_to_mdata(mfd) (((struct mdss_overlay_private *)\
(mfd->mdp.private1))->mdata)
diff --git a/drivers/video/msm/mdss/mdss_mdp_intf_cmd.c b/drivers/video/msm/mdss/mdss_mdp_intf_cmd.c
index d0c1818..cb4c1f2 100644
--- a/drivers/video/msm/mdss/mdss_mdp_intf_cmd.c
+++ b/drivers/video/msm/mdss/mdss_mdp_intf_cmd.c
@@ -224,7 +224,6 @@
mdss_mdp_ctl_intf_event
(ctx->ctl, MDSS_EVENT_PANEL_CLK_CTRL, (void *)0);
mdss_mdp_clk_ctrl(MDP_BLOCK_POWER_OFF, false);
- complete(&ctx->stop_comp);
}
mutex_unlock(&ctx->clk_mtx);
}
@@ -255,6 +254,7 @@
if (ctx->rdptr_enabled == 0) {
mdss_mdp_irq_disable_nosync
(MDSS_MDP_IRQ_PING_PONG_RD_PTR, ctx->pp_num);
+ complete(&ctx->stop_comp);
schedule_work(&ctx->clk_work);
}
@@ -456,7 +456,7 @@
struct mdss_mdp_cmd_ctx *ctx;
unsigned long flags;
int need_wait = 0;
- int ret;
+ int ret = 0;
ctx = (struct mdss_mdp_cmd_ctx *) ctl->priv_data;
if (!ctx) {
@@ -474,13 +474,15 @@
}
spin_unlock_irqrestore(&ctx->clk_lock, flags);
- if (need_wait) {
+ if (need_wait)
if (wait_for_completion_timeout(&ctx->stop_comp, STOP_TIMEOUT)
- <= 0) {
+ <= 0)
WARN(1, "stop cmd time out\n");
- mdss_mdp_cmd_clk_off(ctx);
- }
- }
+
+ if (cancel_work_sync(&ctx->clk_work))
+ pr_debug("no pending clk work\n");
+
+ mdss_mdp_cmd_clk_off(ctx);
ctx->panel_on = 0;
diff --git a/drivers/video/msm/mdss/mdss_mdp_overlay.c b/drivers/video/msm/mdss/mdss_mdp_overlay.c
index 8aee5d6..c4f274f 100644
--- a/drivers/video/msm/mdss/mdss_mdp_overlay.c
+++ b/drivers/video/msm/mdss/mdss_mdp_overlay.c
@@ -1757,6 +1757,10 @@
return -EPERM;
ret = mdss_misr_crc_set(mdata, &metadata->data.misr_request);
break;
+ case metadata_op_wb_format:
+ ret = mdss_mdp_wb_set_format(mfd,
+ metadata->data.mixer_cfg.writeback_format);
+ break;
default:
pr_warn("unsupported request to MDP META IOCTL\n");
ret = -EINVAL;
@@ -1798,6 +1802,9 @@
return -EPERM;
ret = mdss_misr_crc_get(mdata, &metadata->data.misr_request);
break;
+ case metadata_op_wb_format:
+ ret = mdss_mdp_wb_get_format(mfd, &metadata->data.mixer_cfg);
+ break;
default:
pr_warn("Unsupported request to MDP META IOCTL.\n");
ret = -EINVAL;
diff --git a/drivers/video/msm/mdss/mdss_mdp_wb.c b/drivers/video/msm/mdss/mdss_mdp_wb.c
index ff54067..9ae41df 100644
--- a/drivers/video/msm/mdss/mdss_mdp_wb.c
+++ b/drivers/video/msm/mdss/mdss_mdp_wb.c
@@ -577,6 +577,74 @@
}
}
+int mdss_mdp_wb_get_format(struct msm_fb_data_type *mfd,
+ struct mdp_mixer_cfg *mixer_cfg)
+{
+ int dst_format;
+ struct mdss_mdp_ctl *ctl = mfd_to_ctl(mfd);
+
+ if (!ctl) {
+ pr_err("No panel data!\n");
+ return -EINVAL;
+ }
+
+ switch (ctl->dst_format) {
+ case MDP_RGB_888:
+ dst_format = WB_FORMAT_RGB_888;
+ break;
+ case MDP_RGB_565:
+ dst_format = WB_FORMAT_RGB_565;
+ break;
+ case MDP_XRGB_8888:
+ dst_format = WB_FORMAT_xRGB_8888;
+ break;
+ case MDP_ARGB_8888:
+ dst_format = WB_FORMAT_ARGB_8888;
+ break;
+ case MDP_Y_CBCR_H2V2_VENUS:
+ dst_format = WB_FORMAT_NV12;
+ break;
+ default:
+ return -EINVAL;
+ }
+ mixer_cfg->writeback_format = dst_format;
+ return 0;
+}
+
+int mdss_mdp_wb_set_format(struct msm_fb_data_type *mfd, int dst_format)
+{
+ struct mdss_mdp_ctl *ctl = mfd_to_ctl(mfd);
+
+ if (!ctl) {
+ pr_err("No panel data!\n");
+ return -EINVAL;
+ }
+
+ switch (dst_format) {
+ case WB_FORMAT_RGB_888:
+ ctl->dst_format = MDP_RGB_888;
+ break;
+ case WB_FORMAT_RGB_565:
+ ctl->dst_format = MDP_RGB_565;
+ break;
+ case WB_FORMAT_xRGB_8888:
+ ctl->dst_format = MDP_XRGB_8888;
+ break;
+ case WB_FORMAT_ARGB_8888:
+ ctl->dst_format = MDP_ARGB_8888;
+ break;
+ case WB_FORMAT_NV12:
+ ctl->dst_format = MDP_Y_CBCR_H2V2_VENUS;
+ break;
+ default:
+ pr_err("wfd format not supported\n");
+ return -EINVAL;
+ }
+
+ pr_debug("wfd format %d\n", ctl->dst_format);
+ return 0;
+}
+
int mdss_mdp_wb_ioctl_handler(struct msm_fb_data_type *mfd, u32 cmd,
void *arg)
{
diff --git a/sound/soc/codecs/wcd9306.c b/sound/soc/codecs/wcd9306.c
index 7b896c2..f5975d2 100644
--- a/sound/soc/codecs/wcd9306.c
+++ b/sound/soc/codecs/wcd9306.c
@@ -4575,7 +4575,7 @@
rco_clk_rate = TAPAN_MCLK_CLK_9P6MHZ;
ret = wcd9xxx_mbhc_init(&tapan->mbhc, &tapan->resmgr, codec, NULL,
- &mbhc_cb, rco_clk_rate);
+ &mbhc_cb, rco_clk_rate, false);
if (ret)
pr_err("%s: mbhc init failed %d\n", __func__, ret);
else
@@ -4677,7 +4677,7 @@
rco_clk_rate = TAPAN_MCLK_CLK_9P6MHZ;
ret = wcd9xxx_mbhc_init(&tapan->mbhc, &tapan->resmgr, codec, NULL,
- &mbhc_cb, rco_clk_rate);
+ &mbhc_cb, rco_clk_rate, false);
if (ret) {
pr_err("%s: mbhc init failed %d\n", __func__, ret);
diff --git a/sound/soc/codecs/wcd9320.c b/sound/soc/codecs/wcd9320.c
index 59354a3..149ea5c 100644
--- a/sound/soc/codecs/wcd9320.c
+++ b/sound/soc/codecs/wcd9320.c
@@ -6254,7 +6254,7 @@
ret = wcd9xxx_mbhc_init(&taiko->mbhc, &taiko->resmgr, codec,
taiko_enable_mbhc_micbias,
- NULL, rco_clk_rate);
+ NULL, rco_clk_rate, true);
if (ret) {
pr_err("%s: mbhc init failed %d\n", __func__, ret);
} else {
@@ -6436,7 +6436,7 @@
/* init and start mbhc */
ret = wcd9xxx_mbhc_init(&taiko->mbhc, &taiko->resmgr, codec,
taiko_enable_mbhc_micbias,
- NULL, rco_clk_rate);
+ NULL, rco_clk_rate, true);
if (ret) {
pr_err("%s: mbhc init failed %d\n", __func__, ret);
goto err_init;
diff --git a/sound/soc/codecs/wcd9xxx-mbhc.c b/sound/soc/codecs/wcd9xxx-mbhc.c
index d0c00a7..6fdebe6 100644
--- a/sound/soc/codecs/wcd9xxx-mbhc.c
+++ b/sound/soc/codecs/wcd9xxx-mbhc.c
@@ -799,8 +799,8 @@
pr_debug("%s: Enabling micbias\n", __func__);
mbhc->micbias_enable_cb(mbhc->codec, true);
}
-
- wcd9xxx_detect_impedance(mbhc, &mbhc->zl, &mbhc->zr);
+ if (mbhc->impedance_detect)
+ wcd9xxx_detect_impedance(mbhc, &mbhc->zl, &mbhc->zr);
pr_debug("%s: Reporting insertion %d(%x)\n", __func__,
jack_type, mbhc->hph_status);
wcd9xxx_jack_report(mbhc, &mbhc->headset_jack,
@@ -3938,7 +3938,8 @@
int wcd9xxx_mbhc_init(struct wcd9xxx_mbhc *mbhc, struct wcd9xxx_resmgr *resmgr,
struct snd_soc_codec *codec,
int (*micbias_enable_cb) (struct snd_soc_codec*, bool),
- const struct wcd9xxx_mbhc_cb *mbhc_cb, int rco_clk_rate)
+ const struct wcd9xxx_mbhc_cb *mbhc_cb, int rco_clk_rate,
+ bool impedance_det_en)
{
int ret;
void *core;
@@ -3964,6 +3965,7 @@
mbhc->micbias_enable_cb = micbias_enable_cb;
mbhc->rco_clk_rate = rco_clk_rate;
mbhc->mbhc_cb = mbhc_cb;
+ mbhc->impedance_detect = impedance_det_en;
if (mbhc->headset_jack.jack == NULL) {
ret = snd_soc_jack_new(codec, "Headset Jack", WCD9XXX_JACK_MASK,
diff --git a/sound/soc/codecs/wcd9xxx-mbhc.h b/sound/soc/codecs/wcd9xxx-mbhc.h
index 1f6502f..0599ccb 100644
--- a/sound/soc/codecs/wcd9xxx-mbhc.h
+++ b/sound/soc/codecs/wcd9xxx-mbhc.h
@@ -291,6 +291,7 @@
bool micbias_enable;
int (*micbias_enable_cb) (struct snd_soc_codec*, bool);
+ bool impedance_detect;
/* impedance of hphl and hphr */
uint32_t zl, zr;
@@ -363,7 +364,8 @@
struct snd_soc_codec *codec,
int (*micbias_enable_cb) (struct snd_soc_codec*, bool),
const struct wcd9xxx_mbhc_cb *mbhc_cb,
- int rco_clk_rate);
+ int rco_clk_rate,
+ bool impedance_det_en);
void wcd9xxx_mbhc_deinit(struct wcd9xxx_mbhc *mbhc);
void *wcd9xxx_mbhc_cal_btn_det_mp(
const struct wcd9xxx_mbhc_btn_detect_cfg *btn_det,