ARM: Add Versatile Express CA9x4 processor support
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 751858c..3f19b66 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -1,4 +1,9 @@
menu "Versatile Express platform type"
depends on ARCH_VEXPRESS
+config ARCH_VEXPRESS_CA9X4
+ bool "Versatile Express Cortex-A9x4 tile"
+ select CPU_V7
+ select ARM_GIC
+
endmenu
diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
index b47cf73..3c5e160 100644
--- a/arch/arm/mach-vexpress/Makefile
+++ b/arch/arm/mach-vexpress/Makefile
@@ -3,3 +3,4 @@
#
obj-y := v2m.o
+obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
new file mode 100644
index 0000000..5a0449c
--- /dev/null
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -0,0 +1,215 @@
+/*
+ * Versatile Express Core Tile Cortex A9x4 Support
+ */
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+
+#include <asm/clkdev.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach-types.h>
+
+#include <mach/clkdev.h>
+#include <mach/ct-ca9x4.h>
+
+#include <plat/timer-sp.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include "core.h"
+
+#include <mach/motherboard.h>
+
+#define V2M_PA_CS7 0x10000000
+
+static struct map_desc ct_ca9x4_io_desc[] __initdata = {
+ {
+ .virtual = __MMIO_P2V(CT_CA9X4_MPIC),
+ .pfn = __phys_to_pfn(CT_CA9X4_MPIC),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = __MMIO_P2V(CT_CA9X4_SP804_TIMER),
+ .pfn = __phys_to_pfn(CT_CA9X4_SP804_TIMER),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = __MMIO_P2V(CT_CA9X4_L2CC),
+ .pfn = __phys_to_pfn(CT_CA9X4_L2CC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init ct_ca9x4_map_io(void)
+{
+ v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
+}
+
+void __iomem *gic_cpu_base_addr;
+
+static void __init ct_ca9x4_init_irq(void)
+{
+ gic_cpu_base_addr = MMIO_P2V(A9_MPCORE_GIC_CPU);
+ gic_dist_init(0, MMIO_P2V(A9_MPCORE_GIC_DIST), 29);
+ gic_cpu_init(0, gic_cpu_base_addr);
+}
+
+#if 0
+static void ct_ca9x4_timer_init(void)
+{
+ writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL);
+ writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL);
+
+ sp804_clocksource_init(MMIO_P2V(CT_CA9X4_TIMER1));
+ sp804_clockevents_init(MMIO_P2V(CT_CA9X4_TIMER0), IRQ_CT_CA9X4_TIMER0);
+}
+
+static struct sys_timer ct_ca9x4_timer = {
+ .init = ct_ca9x4_timer_init,
+};
+#endif
+
+static struct clcd_panel xvga_panel = {
+ .mode = {
+ .name = "XVGA",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15384,
+ .left_margin = 168,
+ .right_margin = 8,
+ .upper_margin = 29,
+ .lower_margin = 3,
+ .hsync_len = 144,
+ .vsync_len = 6,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_BCD | TIM2_IPC,
+ .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
+ .bpp = 16,
+};
+
+static void ct_ca9x4_clcd_enable(struct clcd_fb *fb)
+{
+ v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE_DB1, 0);
+ v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE_DB1, 2);
+}
+
+static int ct_ca9x4_clcd_setup(struct clcd_fb *fb)
+{
+ unsigned long framesize = 1024 * 768 * 2;
+ dma_addr_t dma;
+
+ fb->panel = &xvga_panel;
+
+ fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
+ &dma, GFP_KERNEL);
+ if (!fb->fb.screen_base) {
+ printk(KERN_ERR "CLCD: unable to map frame buffer\n");
+ return -ENOMEM;
+ }
+ fb->fb.fix.smem_start = dma;
+ fb->fb.fix.smem_len = framesize;
+
+ return 0;
+}
+
+static int ct_ca9x4_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+ return dma_mmap_writecombine(&fb->dev->dev, vma, fb->fb.screen_base,
+ fb->fb.fix.smem_start, fb->fb.fix.smem_len);
+}
+
+static void ct_ca9x4_clcd_remove(struct clcd_fb *fb)
+{
+ dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
+ fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+
+static struct clcd_board ct_ca9x4_clcd_data = {
+ .name = "CT-CA9X4",
+ .check = clcdfb_check,
+ .decode = clcdfb_decode,
+ .enable = ct_ca9x4_clcd_enable,
+ .setup = ct_ca9x4_clcd_setup,
+ .mmap = ct_ca9x4_clcd_mmap,
+ .remove = ct_ca9x4_clcd_remove,
+};
+
+static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
+static AMBA_DEVICE(dmc, "ct:dmc", CT_CA9X4_DMC, NULL);
+static AMBA_DEVICE(smc, "ct:smc", CT_CA9X4_SMC, NULL);
+static AMBA_DEVICE(gpio, "ct:gpio", CT_CA9X4_GPIO, NULL);
+
+static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
+ &clcd_device,
+ &dmc_device,
+ &smc_device,
+ &gpio_device,
+};
+
+
+static long ct_round(struct clk *clk, unsigned long rate)
+{
+ return rate;
+}
+
+static int ct_set(struct clk *clk, unsigned long rate)
+{
+ return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_DB1 | 1, rate);
+}
+
+static const struct clk_ops osc1_clk_ops = {
+ .round = ct_round,
+ .set = ct_set,
+};
+
+static struct clk osc1_clk = {
+ .ops = &osc1_clk_ops,
+ .rate = 24000000,
+};
+
+static struct clk_lookup lookups[] = {
+ { /* CLCD */
+ .dev_id = "ct:clcd",
+ .clk = &osc1_clk,
+ },
+};
+
+static void ct_ca9x4_init(void)
+{
+ int i;
+
+#ifdef CONFIG_CACHE_L2X0
+ l2x0_init(MMIO_P2V(CT_CA9X4_L2CC), 0x00000000, 0xfe0fffff);
+#endif
+
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+ for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++)
+ amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource);
+}
+
+MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4")
+ .phys_io = V2M_UART0,
+ .io_pg_offst = (__MMIO_P2V(V2M_UART0) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x00000100,
+ .map_io = ct_ca9x4_map_io,
+ .init_irq = ct_ca9x4_init_irq,
+#if 0
+ .timer = &ct_ca9x4_timer,
+#else
+ .timer = &v2m_timer,
+#endif
+ .init_machine = ct_ca9x4_init,
+MACHINE_END
diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
new file mode 100644
index 0000000..10718e6
--- /dev/null
+++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
@@ -0,0 +1,43 @@
+#ifndef __MACH_CT_CA9X4_H
+#define __MACH_CT_CA9X4_H
+
+/*
+ * Physical base addresses
+ */
+#define CT_CA9X4_CLCDC (0x10020000)
+#define CT_CA9X4_AXIRAM (0x10060000)
+#define CT_CA9X4_DMC (0x100e0000)
+#define CT_CA9X4_SMC (0x100e1000)
+#define CT_CA9X4_SCC (0x100e2000)
+#define CT_CA9X4_SP804_TIMER (0x100e4000)
+#define CT_CA9X4_SP805_WDT (0x100e5000)
+#define CT_CA9X4_TZPC (0x100e6000)
+#define CT_CA9X4_GPIO (0x100e8000)
+#define CT_CA9X4_FASTAXI (0x100e9000)
+#define CT_CA9X4_SLOWAXI (0x100ea000)
+#define CT_CA9X4_TZASC (0x100ec000)
+#define CT_CA9X4_CORESIGHT (0x10200000)
+#define CT_CA9X4_MPIC (0x1e000000)
+#define CT_CA9X4_SYSTIMER (0x1e004000)
+#define CT_CA9X4_SYSWDT (0x1e007000)
+#define CT_CA9X4_L2CC (0x1e00a000)
+
+#define CT_CA9X4_TIMER0 (CT_CA9X4_SP804_TIMER + 0x000)
+#define CT_CA9X4_TIMER1 (CT_CA9X4_SP804_TIMER + 0x020)
+
+#define A9_MPCORE_SCU (CT_CA9X4_MPIC + 0x0000)
+#define A9_MPCORE_GIC_CPU (CT_CA9X4_MPIC + 0x0100)
+#define A9_MPCORE_GIT (CT_CA9X4_MPIC + 0x0200)
+#define A9_MPCORE_GIC_DIST (CT_CA9X4_MPIC + 0x1000)
+
+/*
+ * Interrupts. Those in {} are for AMBA devices
+ */
+#define IRQ_CT_CA9X4_CLCDC { 76 }
+#define IRQ_CT_CA9X4_DMC { -1 }
+#define IRQ_CT_CA9X4_SMC { 77, 78 }
+#define IRQ_CT_CA9X4_TIMER0 80
+#define IRQ_CT_CA9X4_TIMER1 81
+#define IRQ_CT_CA9X4_GPIO { 82 }
+
+#endif
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c4ed9f9..270c8e2 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -754,7 +754,8 @@
config CACHE_L2X0
bool "Enable the L2x0 outer cache controller"
depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
- REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK || ARCH_OMAP4
+ REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \
+ ARCH_NOMADIK || ARCH_OMAP4 || ARCH_VEXPRESS_CA9X4
default y
select OUTER_CACHE
help