| /* |
| * PS3 interrupt routines. |
| * |
| * Copyright (C) 2006 Sony Computer Entertainment Inc. |
| * Copyright 2006 Sony Corp. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/irq.h> |
| |
| #include <asm/machdep.h> |
| #include <asm/udbg.h> |
| #include <asm/ps3.h> |
| #include <asm/lv1call.h> |
| |
| #include "platform.h" |
| |
| #if defined(DEBUG) |
| #define DBG(fmt...) udbg_printf(fmt) |
| #else |
| #define DBG(fmt...) do{if(0)printk(fmt);}while(0) |
| #endif |
| |
| /** |
| * ps3_alloc_io_irq - Assign a virq to a system bus device. |
| * interrupt_id: The device interrupt id read from the system repository. |
| * @virq: The assigned Linux virq. |
| * |
| * An io irq represents a non-virtualized device interrupt. interrupt_id |
| * coresponds to the interrupt number of the interrupt controller. |
| */ |
| |
| int ps3_alloc_io_irq(unsigned int interrupt_id, unsigned int *virq) |
| { |
| int result; |
| unsigned long outlet; |
| |
| result = lv1_construct_io_irq_outlet(interrupt_id, &outlet); |
| |
| if (result) { |
| pr_debug("%s:%d: lv1_construct_io_irq_outlet failed: %s\n", |
| __func__, __LINE__, ps3_result(result)); |
| return result; |
| } |
| |
| *virq = irq_create_mapping(NULL, outlet); |
| |
| pr_debug("%s:%d: interrupt_id %u => outlet %lu, virq %u\n", |
| __func__, __LINE__, interrupt_id, outlet, *virq); |
| |
| return 0; |
| } |
| |
| int ps3_free_io_irq(unsigned int virq) |
| { |
| int result; |
| |
| result = lv1_destruct_io_irq_outlet(virq_to_hw(virq)); |
| |
| if (result) |
| pr_debug("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n", |
| __func__, __LINE__, ps3_result(result)); |
| |
| irq_dispose_mapping(virq); |
| |
| return result; |
| } |
| |
| /** |
| * ps3_alloc_event_irq - Allocate a virq for use with a system event. |
| * @virq: The assigned Linux virq. |
| * |
| * The virq can be used with lv1_connect_interrupt_event_receive_port() to |
| * arrange to receive events, or with ps3_send_event_locally() to signal |
| * events. |
| */ |
| |
| int ps3_alloc_event_irq(unsigned int *virq) |
| { |
| int result; |
| unsigned long outlet; |
| |
| result = lv1_construct_event_receive_port(&outlet); |
| |
| if (result) { |
| pr_debug("%s:%d: lv1_construct_event_receive_port failed: %s\n", |
| __func__, __LINE__, ps3_result(result)); |
| *virq = NO_IRQ; |
| return result; |
| } |
| |
| *virq = irq_create_mapping(NULL, outlet); |
| |
| pr_debug("%s:%d: outlet %lu, virq %u\n", __func__, __LINE__, outlet, |
| *virq); |
| |
| return 0; |
| } |
| |
| int ps3_free_event_irq(unsigned int virq) |
| { |
| int result; |
| |
| pr_debug(" -> %s:%d\n", __func__, __LINE__); |
| |
| result = lv1_destruct_event_receive_port(virq_to_hw(virq)); |
| |
| if (result) |
| pr_debug("%s:%d: lv1_destruct_event_receive_port failed: %s\n", |
| __func__, __LINE__, ps3_result(result)); |
| |
| irq_dispose_mapping(virq); |
| |
| pr_debug(" <- %s:%d\n", __func__, __LINE__); |
| return result; |
| } |
| |
| int ps3_send_event_locally(unsigned int virq) |
| { |
| return lv1_send_event_locally(virq_to_hw(virq)); |
| } |
| |
| /** |
| * ps3_connect_event_irq - Assign a virq to a system bus device. |
| * @did: The HV device identifier read from the system repository. |
| * @interrupt_id: The device interrupt id read from the system repository. |
| * @virq: The assigned Linux virq. |
| * |
| * An event irq represents a virtual device interrupt. The interrupt_id |
| * coresponds to the software interrupt number. |
| */ |
| |
| int ps3_connect_event_irq(const struct ps3_device_id *did, |
| unsigned int interrupt_id, unsigned int *virq) |
| { |
| int result; |
| |
| result = ps3_alloc_event_irq(virq); |
| |
| if (result) |
| return result; |
| |
| result = lv1_connect_interrupt_event_receive_port(did->bus_id, |
| did->dev_id, virq_to_hw(*virq), interrupt_id); |
| |
| if (result) { |
| pr_debug("%s:%d: lv1_connect_interrupt_event_receive_port" |
| " failed: %s\n", __func__, __LINE__, |
| ps3_result(result)); |
| ps3_free_event_irq(*virq); |
| *virq = NO_IRQ; |
| return result; |
| } |
| |
| pr_debug("%s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__, |
| interrupt_id, *virq); |
| |
| return 0; |
| } |
| |
| int ps3_disconnect_event_irq(const struct ps3_device_id *did, |
| unsigned int interrupt_id, unsigned int virq) |
| { |
| int result; |
| |
| pr_debug(" -> %s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__, |
| interrupt_id, virq); |
| |
| result = lv1_disconnect_interrupt_event_receive_port(did->bus_id, |
| did->dev_id, virq_to_hw(virq), interrupt_id); |
| |
| if (result) |
| pr_debug("%s:%d: lv1_disconnect_interrupt_event_receive_port" |
| " failed: %s\n", __func__, __LINE__, |
| ps3_result(result)); |
| |
| ps3_free_event_irq(virq); |
| |
| pr_debug(" <- %s:%d\n", __func__, __LINE__); |
| return result; |
| } |
| |
| /** |
| * ps3_alloc_vuart_irq - Configure the system virtual uart virq. |
| * @virt_addr_bmp: The caller supplied virtual uart interrupt bitmap. |
| * @virq: The assigned Linux virq. |
| * |
| * The system supports only a single virtual uart, so multiple calls without |
| * freeing the interrupt will return a wrong state error. |
| */ |
| |
| int ps3_alloc_vuart_irq(void* virt_addr_bmp, unsigned int *virq) |
| { |
| int result; |
| unsigned long outlet; |
| unsigned long lpar_addr; |
| |
| BUG_ON(!is_kernel_addr((unsigned long)virt_addr_bmp)); |
| |
| lpar_addr = ps3_mm_phys_to_lpar(__pa(virt_addr_bmp)); |
| |
| result = lv1_configure_virtual_uart_irq(lpar_addr, &outlet); |
| |
| if (result) { |
| pr_debug("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n", |
| __func__, __LINE__, ps3_result(result)); |
| return result; |
| } |
| |
| *virq = irq_create_mapping(NULL, outlet); |
| |
| pr_debug("%s:%d: outlet %lu, virq %u\n", __func__, __LINE__, |
| outlet, *virq); |
| |
| return 0; |
| } |
| |
| int ps3_free_vuart_irq(unsigned int virq) |
| { |
| int result; |
| |
| result = lv1_deconfigure_virtual_uart_irq(); |
| |
| if (result) { |
| pr_debug("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n", |
| __func__, __LINE__, ps3_result(result)); |
| return result; |
| } |
| |
| irq_dispose_mapping(virq); |
| |
| return result; |
| } |
| |
| /** |
| * ps3_alloc_spe_irq - Configure an spe virq. |
| * @spe_id: The spe_id returned from lv1_construct_logical_spe(). |
| * @class: The spe interrupt class {0,1,2}. |
| * @virq: The assigned Linux virq. |
| * |
| */ |
| |
| int ps3_alloc_spe_irq(unsigned long spe_id, unsigned int class, |
| unsigned int *virq) |
| { |
| int result; |
| unsigned long outlet; |
| |
| BUG_ON(class > 2); |
| |
| result = lv1_get_spe_irq_outlet(spe_id, class, &outlet); |
| |
| if (result) { |
| pr_debug("%s:%d: lv1_get_spe_irq_outlet failed: %s\n", |
| __func__, __LINE__, ps3_result(result)); |
| return result; |
| } |
| |
| *virq = irq_create_mapping(NULL, outlet); |
| |
| pr_debug("%s:%d: spe_id %lu, class %u, outlet %lu, virq %u\n", |
| __func__, __LINE__, spe_id, class, outlet, *virq); |
| |
| return 0; |
| } |
| |
| int ps3_free_spe_irq(unsigned int virq) |
| { |
| irq_dispose_mapping(virq); |
| return 0; |
| } |
| |
| #define PS3_INVALID_OUTLET ((irq_hw_number_t)-1) |
| #define PS3_PLUG_MAX 63 |
| |
| /** |
| * struct bmp - a per cpu irq status and mask bitmap structure |
| * @status: 256 bit status bitmap indexed by plug |
| * @unused_1: |
| * @mask: 256 bit mask bitmap indexed by plug |
| * @unused_2: |
| * @lock: |
| * @ipi_debug_brk_mask: |
| * |
| * The HV mantains per SMT thread mappings of HV outlet to HV plug on |
| * behalf of the guest. These mappings are implemented as 256 bit guest |
| * supplied bitmaps indexed by plug number. The address of the bitmaps are |
| * registered with the HV through lv1_configure_irq_state_bitmap(). |
| * |
| * The HV supports 256 plugs per thread, assigned as {0..255}, for a total |
| * of 512 plugs supported on a processor. To simplify the logic this |
| * implementation equates HV plug value to linux virq value, constrains each |
| * interrupt to have a system wide unique plug number, and limits the range |
| * of the plug values to map into the first dword of the bitmaps. This |
| * gives a usable range of plug values of {NUM_ISA_INTERRUPTS..63}. Note |
| * that there is no constraint on how many in this set an individual thread |
| * can aquire. |
| */ |
| |
| struct bmp { |
| struct { |
| unsigned long status; |
| unsigned long unused_1[3]; |
| unsigned long mask; |
| unsigned long unused_2[3]; |
| } __attribute__ ((packed)); |
| spinlock_t lock; |
| unsigned long ipi_debug_brk_mask; |
| }; |
| |
| /** |
| * struct private - a per cpu data structure |
| * @node: HV node id |
| * @cpu: HV thread id |
| * @bmp: an HV bmp structure |
| */ |
| |
| struct private { |
| unsigned long node; |
| unsigned int cpu; |
| struct bmp bmp; |
| }; |
| |
| #if defined(DEBUG) |
| static void _dump_64_bmp(const char *header, const unsigned long *p, unsigned cpu, |
| const char* func, int line) |
| { |
| pr_debug("%s:%d: %s %u {%04lx_%04lx_%04lx_%04lx}\n", |
| func, line, header, cpu, |
| *p >> 48, (*p >> 32) & 0xffff, (*p >> 16) & 0xffff, |
| *p & 0xffff); |
| } |
| |
| static void __attribute__ ((unused)) _dump_256_bmp(const char *header, |
| const unsigned long *p, unsigned cpu, const char* func, int line) |
| { |
| pr_debug("%s:%d: %s %u {%016lx:%016lx:%016lx:%016lx}\n", |
| func, line, header, cpu, p[0], p[1], p[2], p[3]); |
| } |
| |
| #define dump_bmp(_x) _dump_bmp(_x, __func__, __LINE__) |
| static void _dump_bmp(struct private* pd, const char* func, int line) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pd->bmp.lock, flags); |
| _dump_64_bmp("stat", &pd->bmp.status, pd->cpu, func, line); |
| _dump_64_bmp("mask", &pd->bmp.mask, pd->cpu, func, line); |
| spin_unlock_irqrestore(&pd->bmp.lock, flags); |
| } |
| |
| #define dump_mask(_x) _dump_mask(_x, __func__, __LINE__) |
| static void __attribute__ ((unused)) _dump_mask(struct private* pd, |
| const char* func, int line) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pd->bmp.lock, flags); |
| _dump_64_bmp("mask", &pd->bmp.mask, pd->cpu, func, line); |
| spin_unlock_irqrestore(&pd->bmp.lock, flags); |
| } |
| #else |
| static void dump_bmp(struct private* pd) {}; |
| #endif /* defined(DEBUG) */ |
| |
| static void chip_mask(unsigned int virq) |
| { |
| unsigned long flags; |
| struct private *pd = get_irq_chip_data(virq); |
| |
| pr_debug("%s:%d: cpu %u, virq %d\n", __func__, __LINE__, pd->cpu, virq); |
| |
| BUG_ON(virq < NUM_ISA_INTERRUPTS); |
| BUG_ON(virq > PS3_PLUG_MAX); |
| |
| spin_lock_irqsave(&pd->bmp.lock, flags); |
| pd->bmp.mask &= ~(0x8000000000000000UL >> virq); |
| spin_unlock_irqrestore(&pd->bmp.lock, flags); |
| |
| lv1_did_update_interrupt_mask(pd->node, pd->cpu); |
| } |
| |
| static void chip_unmask(unsigned int virq) |
| { |
| unsigned long flags; |
| struct private *pd = get_irq_chip_data(virq); |
| |
| pr_debug("%s:%d: cpu %u, virq %d\n", __func__, __LINE__, pd->cpu, virq); |
| |
| BUG_ON(virq < NUM_ISA_INTERRUPTS); |
| BUG_ON(virq > PS3_PLUG_MAX); |
| |
| spin_lock_irqsave(&pd->bmp.lock, flags); |
| pd->bmp.mask |= (0x8000000000000000UL >> virq); |
| spin_unlock_irqrestore(&pd->bmp.lock, flags); |
| |
| lv1_did_update_interrupt_mask(pd->node, pd->cpu); |
| } |
| |
| static void chip_eoi(unsigned int virq) |
| { |
| lv1_end_of_interrupt(virq); |
| } |
| |
| static struct irq_chip irq_chip = { |
| .typename = "ps3", |
| .mask = chip_mask, |
| .unmask = chip_unmask, |
| .eoi = chip_eoi, |
| }; |
| |
| static void host_unmap(struct irq_host *h, unsigned int virq) |
| { |
| int result; |
| |
| pr_debug("%s:%d: virq %d\n", __func__, __LINE__, virq); |
| |
| lv1_disconnect_irq_plug(virq); |
| |
| result = set_irq_chip_data(virq, NULL); |
| BUG_ON(result); |
| } |
| |
| static DEFINE_PER_CPU(struct private, private); |
| |
| static int host_map(struct irq_host *h, unsigned int virq, |
| irq_hw_number_t hwirq) |
| { |
| int result; |
| unsigned int cpu; |
| |
| pr_debug(" -> %s:%d\n", __func__, __LINE__); |
| pr_debug("%s:%d: hwirq %lu => virq %u\n", __func__, __LINE__, hwirq, |
| virq); |
| |
| /* bind this virq to a cpu */ |
| |
| preempt_disable(); |
| cpu = smp_processor_id(); |
| result = lv1_connect_irq_plug(virq, hwirq); |
| preempt_enable(); |
| |
| if (result) { |
| pr_info("%s:%d: lv1_connect_irq_plug failed:" |
| " %s\n", __func__, __LINE__, ps3_result(result)); |
| return -EPERM; |
| } |
| |
| result = set_irq_chip_data(virq, &per_cpu(private, cpu)); |
| BUG_ON(result); |
| |
| set_irq_chip_and_handler(virq, &irq_chip, handle_fasteoi_irq); |
| |
| pr_debug(" <- %s:%d\n", __func__, __LINE__); |
| return result; |
| } |
| |
| static struct irq_host_ops host_ops = { |
| .map = host_map, |
| .unmap = host_unmap, |
| }; |
| |
| void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq) |
| { |
| struct private *pd = &per_cpu(private, cpu); |
| |
| pd->bmp.ipi_debug_brk_mask = 0x8000000000000000UL >> virq; |
| |
| pr_debug("%s:%d: cpu %u, virq %u, mask %lxh\n", __func__, __LINE__, |
| cpu, virq, pd->bmp.ipi_debug_brk_mask); |
| } |
| |
| static int bmp_get_and_clear_status_bit(struct bmp *m) |
| { |
| unsigned long flags; |
| unsigned int bit; |
| unsigned long x; |
| |
| spin_lock_irqsave(&m->lock, flags); |
| |
| /* check for ipi break first to stop this cpu ASAP */ |
| |
| if (m->status & m->ipi_debug_brk_mask) { |
| m->status &= ~m->ipi_debug_brk_mask; |
| spin_unlock_irqrestore(&m->lock, flags); |
| return __ilog2(m->ipi_debug_brk_mask); |
| } |
| |
| x = (m->status & m->mask); |
| |
| for (bit = NUM_ISA_INTERRUPTS, x <<= bit; x; bit++, x <<= 1) |
| if (x & 0x8000000000000000UL) { |
| m->status &= ~(0x8000000000000000UL >> bit); |
| spin_unlock_irqrestore(&m->lock, flags); |
| return bit; |
| } |
| |
| spin_unlock_irqrestore(&m->lock, flags); |
| |
| pr_debug("%s:%d: not found\n", __func__, __LINE__); |
| return -1; |
| } |
| |
| unsigned int ps3_get_irq(void) |
| { |
| int plug; |
| |
| struct private *pd = &__get_cpu_var(private); |
| |
| plug = bmp_get_and_clear_status_bit(&pd->bmp); |
| |
| if (plug < 1) { |
| pr_debug("%s:%d: no plug found: cpu %u\n", __func__, __LINE__, |
| pd->cpu); |
| dump_bmp(&per_cpu(private, 0)); |
| dump_bmp(&per_cpu(private, 1)); |
| return NO_IRQ; |
| } |
| |
| #if defined(DEBUG) |
| if (plug < NUM_ISA_INTERRUPTS || plug > PS3_PLUG_MAX) { |
| dump_bmp(&per_cpu(private, 0)); |
| dump_bmp(&per_cpu(private, 1)); |
| BUG(); |
| } |
| #endif |
| return plug; |
| } |
| |
| void __init ps3_init_IRQ(void) |
| { |
| int result; |
| unsigned long node; |
| unsigned cpu; |
| struct irq_host *host; |
| |
| lv1_get_logical_ppe_id(&node); |
| |
| host = irq_alloc_host(IRQ_HOST_MAP_NOMAP, 0, &host_ops, |
| PS3_INVALID_OUTLET); |
| irq_set_default_host(host); |
| irq_set_virq_count(PS3_PLUG_MAX + 1); |
| |
| for_each_possible_cpu(cpu) { |
| struct private *pd = &per_cpu(private, cpu); |
| |
| pd->node = node; |
| pd->cpu = cpu; |
| spin_lock_init(&pd->bmp.lock); |
| |
| result = lv1_configure_irq_state_bitmap(node, cpu, |
| ps3_mm_phys_to_lpar(__pa(&pd->bmp.status))); |
| |
| if (result) |
| pr_debug("%s:%d: lv1_configure_irq_state_bitmap failed:" |
| " %s\n", __func__, __LINE__, |
| ps3_result(result)); |
| } |
| |
| ppc_md.get_irq = ps3_get_irq; |
| } |