blob: f3c4a3b910bb0d1c16620695662b86136a6cd061 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001
2#
3# Network device configuration
4#
5
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07006menuconfig NETDEVICES
Paolo 'Blaisorblade' Giarrussoce2d2ae2006-01-18 17:42:59 -08007 default y if UML
Jan Engelhardte0009822007-07-21 19:11:35 -07008 depends on NET
Linus Torvalds1da177e2005-04-16 15:20:36 -07009 bool "Network device support"
10 ---help---
11 You can say N here if you don't intend to connect your Linux box to
12 any other computer at all.
13
14 You'll have to say Y if your computer contains a network card that
15 you want to use under Linux. If you are going to run SLIP or PPP over
16 telephone line or null modem cable you need say Y here. Connecting
17 two machines with parallel ports using PLIP needs this, as well as
18 AX.25/KISS for sending Internet traffic over amateur radio links.
19
20 See also "The Linux Network Administrator's Guide" by Olaf Kirch and
21 Terry Dawson. Available at <http://www.tldp.org/guides.html>.
22
23 If unsure, say Y.
24
Randy Dunlap1618cb02006-09-25 23:11:21 -070025# All the following symbols are dependent on NETDEVICES - do not repeat
26# that for each of the symbols.
27if NETDEVICES
Randy Dunlapcbcd2a42005-07-27 13:04:35 -070028
Stephen Hemmingerd44c3a22009-03-20 19:36:44 +000029config COMPAT_NET_DEV_OPS
30 default y
Marcin Slusarzeb39c572009-04-19 07:24:24 +000031 bool "Enable older network device API compatibility"
Stephen Hemmingerd44c3a22009-03-20 19:36:44 +000032 ---help---
Marcin Slusarzeb39c572009-04-19 07:24:24 +000033 This option enables kernel compatibility with older network devices
Stephen Hemmingerd44c3a22009-03-20 19:36:44 +000034 that do not use net_device_ops interface.
35
36 If unsure, say Y.
37
Jamal Hadi Salim253af422006-01-08 22:34:25 -080038config IFB
39 tristate "Intermediate Functional Block support"
40 depends on NET_CLS_ACT
41 ---help---
Matt LaPlante3cb2fcc2006-11-30 05:22:59 +010042 This is an intermediate driver that allows sharing of
Jamal Hadi Salim253af422006-01-08 22:34:25 -080043 resources.
44 To compile this driver as a module, choose M here: the module
45 will be called ifb. If you want to use more than one ifb
46 device at a time, you need to compile this driver as a module.
47 Instead of 'ifb', the devices will then be called 'ifb0',
48 'ifb1' etc.
49 Look at the iproute2 documentation directory for usage etc
50
Linus Torvalds1da177e2005-04-16 15:20:36 -070051config DUMMY
52 tristate "Dummy net driver support"
Linus Torvalds1da177e2005-04-16 15:20:36 -070053 ---help---
54 This is essentially a bit-bucket device (i.e. traffic you send to
55 this device is consigned into oblivion) with a configurable IP
56 address. It is most commonly used in order to make your currently
57 inactive SLIP address seem like a real address for local programs.
58 If you use SLIP or PPP, you might want to say Y here. Since this
59 thing often comes in handy, the default is Y. It won't enlarge your
60 kernel either. What a deal. Read about it in the Network
61 Administrator's Guide, available from
62 <http://www.tldp.org/docs.html#guide>.
63
64 To compile this driver as a module, choose M here: the module
65 will be called dummy. If you want to use more than one dummy
66 device at a time, you need to compile this driver as a module.
67 Instead of 'dummy', the devices will then be called 'dummy0',
68 'dummy1' etc.
69
70config BONDING
71 tristate "Bonding driver support"
Linus Torvalds1da177e2005-04-16 15:20:36 -070072 depends on INET
Brian Haley305d5522008-11-04 17:51:14 -080073 depends on IPV6 || IPV6=n
Linus Torvalds1da177e2005-04-16 15:20:36 -070074 ---help---
75 Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
76 Channels together. This is called 'Etherchannel' by Cisco,
77 'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
78
79 The driver supports multiple bonding modes to allow for both high
Jon Mason47c51432006-02-12 11:53:04 -060080 performance and high availability operation.
Linus Torvalds1da177e2005-04-16 15:20:36 -070081
82 Refer to <file:Documentation/networking/bonding.txt> for more
83 information.
84
85 To compile this driver as a module, choose M here: the module
86 will be called bonding.
87
Patrick McHardyb863ceb2007-07-14 18:55:06 -070088config MACVLAN
89 tristate "MAC-VLAN support (EXPERIMENTAL)"
90 depends on EXPERIMENTAL
91 ---help---
92 This allows one to create virtual interfaces that map packets to
93 or from specific MAC addresses to a particular interface.
94
Patrick McHardy3dbf8d52008-02-26 17:52:05 -080095 Macvlan devices can be added using the "ip" command from the
96 iproute2 package starting with the iproute2-2.6.23 release:
97
98 "ip link add link <real dev> [ address MAC ] [ NAME ] type macvlan"
99
Patrick McHardyb863ceb2007-07-14 18:55:06 -0700100 To compile this driver as a module, choose M here: the module
101 will be called macvlan.
102
Linus Torvalds1da177e2005-04-16 15:20:36 -0700103config EQUALIZER
104 tristate "EQL (serial line load balancing) support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700105 ---help---
106 If you have two serial connections to some other computer (this
107 usually requires two modems and two telephone lines) and you use
108 SLIP (the protocol for sending Internet traffic over telephone
109 lines) or PPP (a better SLIP) on them, you can make them behave like
110 one double speed connection using this driver. Naturally, this has
111 to be supported at the other end as well, either with a similar EQL
112 Linux driver or with a Livingston Portmaster 2e.
113
114 Say Y if you want this and read
115 <file:Documentation/networking/eql.txt>. You may also want to read
116 section 6.2 of the NET-3-HOWTO, available from
117 <http://www.tldp.org/docs.html#howto>.
118
119 To compile this driver as a module, choose M here: the module
120 will be called eql. If unsure, say N.
121
122config TUN
123 tristate "Universal TUN/TAP device driver support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700124 select CRC32
125 ---help---
126 TUN/TAP provides packet reception and transmission for user space
127 programs. It can be viewed as a simple Point-to-Point or Ethernet
128 device, which instead of receiving packets from a physical media,
129 receives them from user space program and instead of sending packets
130 via physical media writes them to the user space program.
131
132 When a program opens /dev/net/tun, driver creates and registers
133 corresponding net device tunX or tapX. After a program closed above
134 devices, driver will automatically delete tunXX or tapXX device and
135 all routes corresponding to it.
136
137 Please read <file:Documentation/networking/tuntap.txt> for more
138 information.
139
140 To compile this driver as a module, choose M here: the module
141 will be called tun.
142
143 If you don't know what to use this for, you don't need it.
144
Pavel Emelyanove314dbd2007-09-25 16:14:46 -0700145config VETH
Rusty Russell6a9a0252007-11-06 20:35:55 -0800146 tristate "Virtual ethernet pair device"
Pavel Emelyanove314dbd2007-09-25 16:14:46 -0700147 ---help---
Rusty Russell6a9a0252007-11-06 20:35:55 -0800148 This device is a local ethernet tunnel. Devices are created in pairs.
149 When one end receives the packet it appears on its pair and vice
150 versa.
Pavel Emelyanove314dbd2007-09-25 16:14:46 -0700151
Linus Torvalds1da177e2005-04-16 15:20:36 -0700152config NET_SB1000
153 tristate "General Instruments Surfboard 1000"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -0700154 depends on PNP
Linus Torvalds1da177e2005-04-16 15:20:36 -0700155 ---help---
156 This is a driver for the General Instrument (also known as
157 NextLevel) SURFboard 1000 internal
158 cable modem. This is an ISA card which is used by a number of cable
159 TV companies to provide cable modem access. It's a one-way
160 downstream-only cable modem, meaning that your upstream net link is
161 provided by your regular phone modem.
162
163 At present this driver only compiles as a module, so say M here if
164 you have this card. The module will be called sb1000. Then read
165 <file:Documentation/networking/README.sb1000> for information on how
166 to use this module, as it needs special ppp scripts for establishing
167 a connection. Further documentation and the necessary scripts can be
168 found at:
169
170 <http://www.jacksonville.net/~fventuri/>
171 <http://home.adelphia.net/~siglercm/sb1000.html>
172 <http://linuxpower.cx/~cable/>
173
174 If you don't have this card, of course say N.
175
Adrian Bunkf65fd8f2006-01-05 22:45:41 -0800176source "drivers/net/arcnet/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700177
Andy Fleming00db8182005-07-30 19:31:23 -0400178source "drivers/net/phy/Kconfig"
179
Linus Torvalds1da177e2005-04-16 15:20:36 -0700180#
181# Ethernet
182#
183
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700184menuconfig NET_ETHERNET
Linus Torvalds1da177e2005-04-16 15:20:36 -0700185 bool "Ethernet (10 or 100Mbit)"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700186 depends on !UML
Linus Torvalds1da177e2005-04-16 15:20:36 -0700187 ---help---
188 Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
189 type of Local Area Network (LAN) in universities and companies.
190
191 Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over
192 coaxial cable, linking computers in a chain), 10BASE-T or twisted
193 pair (10 Mbps over twisted pair cable, linking computers to central
194 hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs),
195 100BASE-TX (100 Mbps over two twisted pair cables, using hubs),
196 100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair
197 cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links)
198 [the 100BASE varieties are also known as Fast Ethernet], and Gigabit
199 Ethernet (1 Gbps over optical fiber or short copper links).
200
201 If your Linux machine will be connected to an Ethernet and you have
202 an Ethernet network interface card (NIC) installed in your computer,
203 say Y here and read the Ethernet-HOWTO, available from
204 <http://www.tldp.org/docs.html#howto>. You will then also have
205 to say Y to the driver for your particular NIC.
206
207 Note that the answer to this question won't directly affect the
208 kernel: saying N will just cause the configurator to skip all
209 the questions about Ethernet network cards. If unsure, say N.
210
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700211if NET_ETHERNET
212
Linus Torvalds1da177e2005-04-16 15:20:36 -0700213config MII
214 tristate "Generic Media Independent Interface device support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700215 help
216 Most ethernet controllers have MII transceiver either as an external
217 or internal device. It is safe to say Y or M here even if your
218 ethernet card lack MII.
219
Haavard Skinnemoen89e57852006-11-09 14:51:17 +0100220config MACB
221 tristate "Atmel MACB support"
sedji gaouaou61352662008-07-10 10:15:35 +0100222 depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91CAP9
frederic RODO6c36a702007-07-12 19:07:24 +0200223 select PHYLIB
Haavard Skinnemoen89e57852006-11-09 14:51:17 +0100224 help
225 The Atmel MACB ethernet interface is found on many AT32 and AT91
226 parts. Say Y to include support for the MACB chip.
227
228 To compile this driver as a module, choose M here: the module
229 will be called macb.
230
Linus Torvalds1da177e2005-04-16 15:20:36 -0700231source "drivers/net/arm/Kconfig"
232
Ben Dooks825a2ff2007-07-03 16:53:09 +0100233config AX88796
234 tristate "ASIX AX88796 NE2000 clone support"
Magnus Damm86879912007-11-08 16:31:05 +0900235 depends on ARM || MIPS || SUPERH
Ben Dooks825a2ff2007-07-03 16:53:09 +0100236 select CRC32
237 select MII
238 help
239 AX88796 driver, using platform bus to provide
240 chip detection and resources
241
Magnus Damm89e536a2007-09-28 22:42:16 -0700242config AX88796_93CX6
243 bool "ASIX AX88796 external 93CX6 eeprom support"
244 depends on AX88796
245 select EEPROM_93CX6
246 help
247 Select this if your platform comes with an external 93CX6 eeprom.
248
Linus Torvalds1da177e2005-04-16 15:20:36 -0700249config MACE
250 tristate "MACE (Power Mac ethernet) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700251 depends on PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700252 select CRC32
253 help
254 Power Macintoshes and clones with Ethernet built-in on the
255 motherboard will usually use a MACE (Medium Access Control for
256 Ethernet) interface. Say Y to include support for the MACE chip.
257
258 To compile this driver as a module, choose M here: the module
259 will be called mace.
260
261config MACE_AAUI_PORT
262 bool "Use AAUI port instead of TP by default"
263 depends on MACE
264 help
265 Some Apple machines (notably the Apple Network Server) which use the
266 MACE ethernet chip have an Apple AUI port (small 15-pin connector),
267 instead of an 8-pin RJ45 connector for twisted-pair ethernet. Say
268 Y here if you have such a machine. If unsure, say N.
269 The driver will default to AAUI on ANS anyway, and if you use it as
270 a module, you can provide the port_aaui=0|1 to force the driver.
271
272config BMAC
273 tristate "BMAC (G3 ethernet) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700274 depends on PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700275 select CRC32
276 help
277 Say Y for support of BMAC Ethernet interfaces. These are used on G3
278 computers.
279
280 To compile this driver as a module, choose M here: the module
281 will be called bmac.
282
Linus Torvalds1da177e2005-04-16 15:20:36 -0700283config ARIADNE
284 tristate "Ariadne support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700285 depends on ZORRO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700286 help
287 If you have a Village Tronic Ariadne Ethernet adapter, say Y.
288 Otherwise, say N.
289
290 To compile this driver as a module, choose M here: the module
291 will be called ariadne.
292
293config A2065
294 tristate "A2065 support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700295 depends on ZORRO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700296 select CRC32
297 help
298 If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
299 say N.
300
301 To compile this driver as a module, choose M here: the module
302 will be called a2065.
303
304config HYDRA
305 tristate "Hydra support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700306 depends on ZORRO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700307 select CRC32
308 help
309 If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
310
311 To compile this driver as a module, choose M here: the module
312 will be called hydra.
313
314config ZORRO8390
315 tristate "Zorro NS8390-based Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700316 depends on ZORRO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700317 select CRC32
318 help
319 This driver is for Zorro Ethernet cards using an NS8390-compatible
320 chipset, like the Village Tronic Ariadne II and the Individual
321 Computers X-Surf Ethernet cards. If you have such a card, say Y.
322 Otherwise, say N.
323
324 To compile this driver as a module, choose M here: the module
325 will be called zorro8390.
326
327config APNE
328 tristate "PCMCIA NE2000 support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700329 depends on AMIGA_PCMCIA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700330 select CRC32
331 help
332 If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
333 say N.
334
335 To compile this driver as a module, choose M here: the module
336 will be called apne.
337
Linus Torvalds1da177e2005-04-16 15:20:36 -0700338config MAC8390
339 bool "Macintosh NS 8390 based ethernet cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700340 depends on MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700341 select CRC32
342 help
343 If you want to include a driver to support Nubus or LC-PDS
344 Ethernet cards using an NS8390 chipset or its equivalent, say Y
345 and read the Ethernet-HOWTO, available from
346 <http://www.tldp.org/docs.html#howto>.
347
348config MAC89x0
349 tristate "Macintosh CS89x0 based ethernet cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700350 depends on MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700351 ---help---
352 Support for CS89x0 chipset based Ethernet cards. If you have a
353 Nubus or LC-PDS network (Ethernet) card of this type, say Y and
354 read the Ethernet-HOWTO, available from
355 <http://www.tldp.org/docs.html#howto>.
356
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800357 To compile this driver as a module, choose M here. This module will
Linus Torvalds1da177e2005-04-16 15:20:36 -0700358 be called mac89x0.
359
360config MACSONIC
361 tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700362 depends on MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700363 ---help---
364 Support for NatSemi SONIC based Ethernet devices. This includes
365 the onboard Ethernet in many Quadras as well as some LC-PDS,
366 a few Nubus and all known Comm Slot Ethernet cards. If you have
367 one of these say Y and read the Ethernet-HOWTO, available from
368 <http://www.tldp.org/docs.html#howto>.
369
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800370 To compile this driver as a module, choose M here. This module will
Linus Torvalds1da177e2005-04-16 15:20:36 -0700371 be called macsonic.
372
373config MACMACE
Finn Thain8b6aaab2007-05-01 22:33:01 +0200374 bool "Macintosh (AV) onboard MACE ethernet"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700375 depends on MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700376 select CRC32
377 help
378 Support for the onboard AMD 79C940 MACE Ethernet controller used in
379 the 660AV and 840AV Macintosh. If you have one of these Macintoshes
380 say Y and read the Ethernet-HOWTO, available from
381 <http://www.tldp.org/docs.html#howto>.
382
383config MVME147_NET
384 tristate "MVME147 (Lance) Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700385 depends on MVME147
Linus Torvalds1da177e2005-04-16 15:20:36 -0700386 select CRC32
387 help
388 Support for the on-board Ethernet interface on the Motorola MVME147
389 single-board computer. Say Y here to include the
390 driver for this chip in your kernel.
391 To compile this driver as a module, choose M here.
392
393config MVME16x_NET
394 tristate "MVME16x Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700395 depends on MVME16x
Linus Torvalds1da177e2005-04-16 15:20:36 -0700396 help
397 This is the driver for the Ethernet interface on the Motorola
398 MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
399 driver for this chip in your kernel.
400 To compile this driver as a module, choose M here.
401
402config BVME6000_NET
403 tristate "BVME6000 Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700404 depends on BVME6000
Linus Torvalds1da177e2005-04-16 15:20:36 -0700405 help
406 This is the driver for the Ethernet interface on BVME4000 and
407 BVME6000 VME boards. Say Y here to include the driver for this chip
408 in your kernel.
409 To compile this driver as a module, choose M here.
410
411config ATARILANCE
412 tristate "Atari Lance support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700413 depends on ATARI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700414 help
415 Say Y to include support for several Atari Ethernet adapters based
416 on the AMD Lance chipset: RieblCard (with or without battery), or
417 PAMCard VME (also the version by Rhotron, with different addresses).
418
Linus Torvalds1da177e2005-04-16 15:20:36 -0700419config SUN3LANCE
420 tristate "Sun3/Sun3x on-board LANCE support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700421 depends on SUN3 || SUN3X
Linus Torvalds1da177e2005-04-16 15:20:36 -0700422 help
423 Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
424 featured an AMD Lance 10Mbit Ethernet controller on board; say Y
425 here to compile in the Linux driver for this and enable Ethernet.
426 General Linux information on the Sun 3 and 3x series (now
427 discontinued) is at
428 <http://www.angelfire.com/ca2/tech68k/sun3.html>.
429
430 If you're not building a kernel for a Sun 3, say N.
431
432config SUN3_82586
Al Viro9a482202005-08-25 06:24:56 +0100433 bool "Sun3 on-board Intel 82586 support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700434 depends on SUN3
Linus Torvalds1da177e2005-04-16 15:20:36 -0700435 help
436 This driver enables support for the on-board Intel 82586 based
437 Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
438 that this driver does not support 82586-based adapters on additional
439 VME boards.
440
441config HPLANCE
442 bool "HP on-board LANCE support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700443 depends on DIO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700444 select CRC32
445 help
446 If you want to use the builtin "LANCE" Ethernet controller on an
447 HP300 machine, say Y here.
448
449config LASI_82596
450 tristate "Lasi ethernet"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700451 depends on GSC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700452 help
Matthew Wilcox6de187e2006-11-18 10:05:16 -0700453 Say Y here to support the builtin Intel 82596 ethernet controller
454 found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700455
Thomas Bogendoerferf2ec8032007-06-28 00:49:06 +0200456config SNI_82596
457 tristate "SNI RM ethernet"
458 depends on NET_ETHERNET && SNI_RM
459 help
460 Say Y here to support the on-board Intel 82596 ethernet controller
461 built into SNI RM machines.
462
Florian Fainellief112912008-03-19 17:14:51 +0100463config KORINA
464 tristate "Korina (IDT RC32434) Ethernet support"
Ralf Baechlef57b2062008-04-28 12:48:40 +0100465 depends on NET_ETHERNET && MIKROTIK_RB532
Florian Fainellief112912008-03-19 17:14:51 +0100466 help
467 If you have a Mikrotik RouterBoard 500 or IDT RC32434
468 based system say Y. Otherwise say N.
469
Linus Torvalds1da177e2005-04-16 15:20:36 -0700470config MIPS_JAZZ_SONIC
471 tristate "MIPS JAZZ onboard SONIC Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700472 depends on MACH_JAZZ
Linus Torvalds1da177e2005-04-16 15:20:36 -0700473 help
474 This is the driver for the onboard card of MIPS Magnum 4000,
475 Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
476
Chris Zankel74f2a5f02008-05-05 23:36:35 -0700477config XTENSA_XT2000_SONIC
478 tristate "Xtensa XT2000 onboard SONIC Ethernet support"
479 depends on XTENSA_PLATFORM_XT2000
480 help
481 This is the driver for the onboard card of the Xtensa XT2000 board.
482
Linus Torvalds1da177e2005-04-16 15:20:36 -0700483config MIPS_AU1X00_ENET
484 bool "MIPS AU1000 Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700485 depends on SOC_AU1X00
Herbert Valerio Riedel0638dec2006-06-01 09:41:04 +0200486 select PHYLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -0700487 select CRC32
488 help
489 If you have an Alchemy Semi AU1X00 based system
490 say Y. Otherwise, say N.
491
Linus Torvalds1da177e2005-04-16 15:20:36 -0700492config SGI_IOC3_ETH
493 bool "SGI IOC3 Ethernet"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700494 depends on PCI && SGI_IP27
Linus Torvalds1da177e2005-04-16 15:20:36 -0700495 select CRC32
496 select MII
497 help
498 If you have a network (Ethernet) card of this type, say Y and read
499 the Ethernet-HOWTO, available from
500 <http://www.tldp.org/docs.html#howto>.
501
Ralf Baechledcbf8472005-10-10 14:51:27 +0100502config MIPS_SIM_NET
Ralf Baechle1e2b9802007-03-18 23:21:22 +0000503 tristate "MIPS simulator Network device"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700504 depends on MIPS_SIM
Ralf Baechledcbf8472005-10-10 14:51:27 +0100505 help
506 The MIPSNET device is a simple Ethernet network device which is
507 emulated by the MIPS Simulator.
508 If you are not using a MIPSsim or are unsure, say N.
509
Linus Torvalds1da177e2005-04-16 15:20:36 -0700510config SGI_O2MACE_ETH
511 tristate "SGI O2 MACE Fast Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700512 depends on SGI_IP32=y
Linus Torvalds1da177e2005-04-16 15:20:36 -0700513
514config STNIC
515 tristate "National DP83902AV support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700516 depends on SUPERH
Linus Torvalds1da177e2005-04-16 15:20:36 -0700517 select CRC32
518 help
519 Support for cards based on the National Semiconductor DP83902AV
520 ST-NIC Serial Network Interface Controller for Twisted Pair. This
521 is a 10Mbit/sec Ethernet controller. Product overview and specs at
522 <http://www.national.com/pf/DP/DP83902A.html>.
523
524 If unsure, say N.
525
Nobuhiro Iwamatsu86a74ff2008-06-09 16:33:56 -0700526config SH_ETH
527 tristate "Renesas SuperH Ethernet support"
528 depends on SUPERH && \
Yoshinori Sato71557a32008-08-06 19:49:00 -0400529 (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763 || \
530 CPU_SUBTYPE_SH7619)
Nobuhiro Iwamatsu86a74ff2008-06-09 16:33:56 -0700531 select CRC32
532 select MII
533 select MDIO_BITBANG
534 select PHYLIB
535 help
536 Renesas SuperH Ethernet device driver.
Yoshinori Sato71557a32008-08-06 19:49:00 -0400537 This driver support SH7710, SH7712, SH7763 and SH7619.
Nobuhiro Iwamatsu86a74ff2008-06-09 16:33:56 -0700538
Linus Torvalds1da177e2005-04-16 15:20:36 -0700539config SUNLANCE
540 tristate "Sun LANCE support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700541 depends on SBUS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700542 select CRC32
543 help
544 This driver supports the "le" interface present on all 32-bit Sparc
545 systems, on some older Ultra systems and as an Sbus option. These
546 cards are based on the AMD Lance chipset, which is better known
547 via the NE2100 cards.
548
549 To compile this driver as a module, choose M here: the module
550 will be called sunlance.
551
552config HAPPYMEAL
553 tristate "Sun Happy Meal 10/100baseT support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700554 depends on SBUS || PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700555 select CRC32
556 help
557 This driver supports the "hme" interface present on most Ultra
558 systems and as an option on older Sbus systems. This driver supports
559 both PCI and Sbus devices. This driver also supports the "qfe" quad
560 100baseT device available in both PCI and Sbus configurations.
561
562 To compile this driver as a module, choose M here: the module
563 will be called sunhme.
564
565config SUNBMAC
566 tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700567 depends on SBUS && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -0700568 select CRC32
569 help
570 This driver supports the "be" interface available as an Sbus option.
571 This is Sun's older 100baseT Ethernet device.
572
573 To compile this driver as a module, choose M here: the module
574 will be called sunbmac.
575
576config SUNQE
577 tristate "Sun QuadEthernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700578 depends on SBUS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700579 select CRC32
580 help
581 This driver supports the "qe" 10baseT Ethernet device, available as
582 an Sbus option. Note that this is not the same as Quad FastEthernet
583 "qfe" which is supported by the Happy Meal driver instead.
584
585 To compile this driver as a module, choose M here: the module
586 will be called sunqe.
587
588config SUNGEM
589 tristate "Sun GEM support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700590 depends on PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700591 select CRC32
592 help
593 Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also
594 <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>.
595
David S. Miller1f26dac2005-09-27 15:24:13 -0700596config CASSINI
597 tristate "Sun Cassini support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700598 depends on PCI
David S. Miller1f26dac2005-09-27 15:24:13 -0700599 select CRC32
600 help
601 Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
602 <http://www.sun.com/products-n-solutions/hardware/docs/pdf/817-4341-10.pdf>
603
David S. Miller4c521e42007-07-09 22:23:51 -0700604config SUNVNET
605 tristate "Sun Virtual Network support"
606 depends on SUN_LDOMS
607 help
608 Support for virtual network devices under Sun Logical Domains.
609
Linus Torvalds1da177e2005-04-16 15:20:36 -0700610config NET_VENDOR_3COM
611 bool "3COM cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700612 depends on ISA || EISA || MCA || PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700613 help
614 If you have a network (Ethernet) card belonging to this class, say Y
615 and read the Ethernet-HOWTO, available from
616 <http://www.tldp.org/docs.html#howto>.
617
618 Note that the answer to this question doesn't directly affect the
619 kernel: saying N will just cause the configurator to skip all
620 the questions about 3COM cards. If you say Y, you will be asked for
621 your specific card in the following questions.
622
623config EL1
624 tristate "3c501 \"EtherLink\" support"
625 depends on NET_VENDOR_3COM && ISA
626 ---help---
627 If you have a network (Ethernet) card of this type, say Y and read
628 the Ethernet-HOWTO, available from
629 <http://www.tldp.org/docs.html#howto>. Also, consider buying a
630 new card, since the 3c501 is slow, broken, and obsolete: you will
631 have problems. Some people suggest to ping ("man ping") a nearby
632 machine every minute ("man cron") when using this card.
633
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800634 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700635 will be called 3c501.
636
637config EL2
638 tristate "3c503 \"EtherLink II\" support"
639 depends on NET_VENDOR_3COM && ISA
640 select CRC32
641 help
642 If you have a network (Ethernet) card of this type, say Y and read
643 the Ethernet-HOWTO, available from
644 <http://www.tldp.org/docs.html#howto>.
645
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800646 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700647 will be called 3c503.
648
649config ELPLUS
650 tristate "3c505 \"EtherLink Plus\" support"
Al Viroa5532602005-05-04 05:39:42 +0100651 depends on NET_VENDOR_3COM && ISA && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700652 ---help---
653 Information about this network (Ethernet) card can be found in
654 <file:Documentation/networking/3c505.txt>. If you have a card of
655 this type, say Y and read the Ethernet-HOWTO, available from
656 <http://www.tldp.org/docs.html#howto>.
657
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800658 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700659 will be called 3c505.
660
661config EL16
662 tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
663 depends on NET_VENDOR_3COM && ISA && EXPERIMENTAL
664 help
665 If you have a network (Ethernet) card of this type, say Y and read
666 the Ethernet-HOWTO, available from
667 <http://www.tldp.org/docs.html#howto>.
668
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800669 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700670 will be called 3c507.
671
672config EL3
673 tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
674 depends on NET_VENDOR_3COM && (ISA || EISA || MCA)
675 ---help---
676 If you have a network (Ethernet) card belonging to the 3Com
677 EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
678 from <http://www.tldp.org/docs.html#howto>.
679
680 If your card is not working you may need to use the DOS
681 setup disk to disable Plug & Play mode, and to select the default
682 media type.
683
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800684 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700685 will be called 3c509.
686
687config 3C515
688 tristate "3c515 ISA \"Fast EtherLink\""
Al Viroa5532602005-05-04 05:39:42 +0100689 depends on NET_VENDOR_3COM && (ISA || EISA) && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700690 help
691 If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
692 network card, say Y and read the Ethernet-HOWTO, available from
693 <http://www.tldp.org/docs.html#howto>.
694
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800695 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700696 will be called 3c515.
697
698config ELMC
699 tristate "3c523 \"EtherLink/MC\" support"
700 depends on NET_VENDOR_3COM && MCA_LEGACY
701 help
702 If you have a network (Ethernet) card of this type, say Y and read
703 the Ethernet-HOWTO, available from
704 <http://www.tldp.org/docs.html#howto>.
705
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800706 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700707 will be called 3c523.
708
709config ELMC_II
710 tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
711 depends on NET_VENDOR_3COM && MCA && MCA_LEGACY
712 help
713 If you have a network (Ethernet) card of this type, say Y and read
714 the Ethernet-HOWTO, available from
715 <http://www.tldp.org/docs.html#howto>.
716
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800717 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700718 will be called 3c527.
719
720config VORTEX
721 tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
722 depends on NET_VENDOR_3COM && (PCI || EISA)
723 select MII
724 ---help---
Jon Mason47c51432006-02-12 11:53:04 -0600725 This option enables driver support for a large number of 10Mbps and
726 10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700727
728 "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
729 "Boomerang" (EtherLink XL 3c900 or 3c905) PCI
730 "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus
731 "Tornado" (3c905) PCI
732 "Hurricane" (3c555/3cSOHO) PCI
733
734 If you have such a card, say Y and read the Ethernet-HOWTO,
735 available from <http://www.tldp.org/docs.html#howto>. More
736 specific information is in
737 <file:Documentation/networking/vortex.txt> and in the comments at
738 the beginning of <file:drivers/net/3c59x.c>.
739
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800740 To compile this support as a module, choose M here.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700741
742config TYPHOON
743 tristate "3cr990 series \"Typhoon\" support"
744 depends on NET_VENDOR_3COM && PCI
745 select CRC32
746 ---help---
747 This option enables driver support for the 3cr990 series of cards:
748
749 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
750 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
751 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
752
753 If you have a network (Ethernet) card of this type, say Y and read
754 the Ethernet-HOWTO, available from
755 <http://www.tldp.org/docs.html#howto>.
756
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800757 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700758 will be called typhoon.
759
760config LANCE
761 tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700762 depends on ISA && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700763 help
764 If you have a network (Ethernet) card of this type, say Y and read
765 the Ethernet-HOWTO, available from
766 <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
767 of this type.
768
769 To compile this driver as a module, choose M here: the module
770 will be called lance. This is recommended.
771
772config NET_VENDOR_SMC
773 bool "Western Digital/SMC cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700774 depends on ISA || MCA || EISA || MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700775 help
776 If you have a network (Ethernet) card belonging to this class, say Y
777 and read the Ethernet-HOWTO, available from
778 <http://www.tldp.org/docs.html#howto>.
779
780 Note that the answer to this question doesn't directly affect the
781 kernel: saying N will just cause the configurator to skip all
782 the questions about Western Digital cards. If you say Y, you will be
783 asked for your specific card in the following questions.
784
785config WD80x3
786 tristate "WD80*3 support"
787 depends on NET_VENDOR_SMC && ISA
788 select CRC32
789 help
790 If you have a network (Ethernet) card of this type, say Y and read
791 the Ethernet-HOWTO, available from
792 <http://www.tldp.org/docs.html#howto>.
793
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800794 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700795 will be called wd.
796
797config ULTRAMCA
798 tristate "SMC Ultra MCA support"
799 depends on NET_VENDOR_SMC && MCA
800 select CRC32
801 help
802 If you have a network (Ethernet) card of this type and are running
803 an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
804 available from <http://www.tldp.org/docs.html#howto>.
805
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800806 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700807 will be called smc-mca.
808
809config ULTRA
810 tristate "SMC Ultra support"
811 depends on NET_VENDOR_SMC && ISA
812 select CRC32
813 ---help---
814 If you have a network (Ethernet) card of this type, say Y and read
815 the Ethernet-HOWTO, available from
816 <http://www.tldp.org/docs.html#howto>.
817
818 Important: There have been many reports that, with some motherboards
819 mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
820 such as some BusLogic models) causes corruption problems with many
821 operating systems. The Linux smc-ultra driver has a work-around for
822 this but keep it in mind if you have such a SCSI card and have
823 problems.
824
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800825 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700826 will be called smc-ultra.
827
828config ULTRA32
829 tristate "SMC Ultra32 EISA support"
830 depends on NET_VENDOR_SMC && EISA
831 select CRC32
832 help
833 If you have a network (Ethernet) card of this type, say Y and read
834 the Ethernet-HOWTO, available from
835 <http://www.tldp.org/docs.html#howto>.
836
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800837 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700838 will be called smc-ultra32.
839
Bryan Wue190d6b2007-07-17 14:43:44 +0800840config BFIN_MAC
Mike Frysinger736783b2008-08-27 11:47:57 +0800841 tristate "Blackfin on-chip MAC support"
Sonic Zhang33a2a2b2009-01-08 10:52:26 -0800842 depends on NET_ETHERNET && (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
Bryan Wue190d6b2007-07-17 14:43:44 +0800843 select CRC32
Bryan Wueeb70af2007-09-19 23:37:41 +0800844 select MII
845 select PHYLIB
Bryan Wue190d6b2007-07-17 14:43:44 +0800846 select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
847 help
Mike Frysinger736783b2008-08-27 11:47:57 +0800848 This is the driver for Blackfin on-chip mac device. Say Y if you want it
Bryan Wue190d6b2007-07-17 14:43:44 +0800849 compiled into the kernel. This driver is also available as a module
850 ( = code which can be inserted in and removed from the running kernel
851 whenever you want). The module will be called bfin_mac.
852
853config BFIN_MAC_USE_L1
854 bool "Use L1 memory for rx/tx packets"
Michael Hennerich6893ff12008-01-30 16:52:25 +0800855 depends on BFIN_MAC && (BF527 || BF537)
Bryan Wue190d6b2007-07-17 14:43:44 +0800856 default y
857 help
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200858 To get maximum network performance, you should use L1 memory as rx/tx buffers.
Bryan Wue190d6b2007-07-17 14:43:44 +0800859 Say N here if you want to reserve L1 memory for other uses.
860
861config BFIN_TX_DESC_NUM
862 int "Number of transmit buffer packets"
863 depends on BFIN_MAC
864 range 6 10 if BFIN_MAC_USE_L1
865 range 10 100
866 default "10"
867 help
868 Set the number of buffer packets used in driver.
869
870config BFIN_RX_DESC_NUM
871 int "Number of receive buffer packets"
872 depends on BFIN_MAC
873 range 20 100 if BFIN_MAC_USE_L1
874 range 20 800
875 default "20"
876 help
877 Set the number of buffer packets used in driver.
878
879config BFIN_MAC_RMII
880 bool "RMII PHY Interface (EXPERIMENTAL)"
881 depends on BFIN_MAC && EXPERIMENTAL
Michael Hennerich6893ff12008-01-30 16:52:25 +0800882 default y if BFIN527_EZKIT
883 default n if BFIN537_STAMP
Bryan Wue190d6b2007-07-17 14:43:44 +0800884 help
885 Use Reduced PHY MII Interface
886
Linus Torvalds1da177e2005-04-16 15:20:36 -0700887config SMC9194
888 tristate "SMC 9194 support"
889 depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
890 select CRC32
891 ---help---
892 This is support for the SMC9xxx based Ethernet cards. Choose this
893 option if you have a DELL laptop with the docking station, or
894 another SMC9192/9194 based chipset. Say Y if you want it compiled
895 into the kernel, and read the file
896 <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
897 available from <http://www.tldp.org/docs.html#howto>.
898
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800899 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700900 will be called smc9194.
901
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700902config SMC91X
903 tristate "SMC 91C9x/91C1xxx support"
904 select CRC32
905 select MII
David Howellsb920de12008-02-08 04:19:31 -0800906 depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \
Atsushi Nemotocde0d912008-10-21 00:00:29 +0900907 MIPS || BLACKFIN || MN10300
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700908 help
909 This is a driver for SMC's 91x series of Ethernet chipsets,
910 including the SMC91C94 and the SMC91C111. Say Y if you want it
911 compiled into the kernel, and read the file
912 <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
913 available from <http://www.linuxdoc.org/docs.html#howto>.
914
915 This driver is also available as a module ( = code which can be
916 inserted in and removed from the running kernel whenever you want).
917 The module will be called smc91x. If you want to compile it as a
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800918 module, say M here and read <file:Documentation/kbuild/modules.txt>.
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700919
Sascha Hauer92aa6742006-06-22 07:11:13 +0200920config NET_NETX
921 tristate "NetX Ethernet support"
922 select MII
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700923 depends on ARCH_NETX
Sascha Hauer92aa6742006-06-22 07:11:13 +0200924 help
925 This is support for the Hilscher netX builtin Ethernet ports
926
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800927 To compile this driver as a module, choose M here. The module
Sascha Hauer92aa6742006-06-22 07:11:13 +0200928 will be called netx-eth.
929
Sascha Hauera1365272005-05-05 15:14:15 -0700930config DM9000
931 tristate "DM9000 support"
Alex Landauf40d24d2007-07-12 12:11:48 +0800932 depends on ARM || BLACKFIN || MIPS
Sascha Hauera1365272005-05-05 15:14:15 -0700933 select CRC32
934 select MII
935 ---help---
936 Support for DM9000 chipset.
937
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800938 To compile this driver as a module, choose M here. The module
939 will be called dm9000.
Sascha Hauera1365272005-05-05 15:14:15 -0700940
Ben Dooks485ca222008-06-24 22:16:06 +0100941config DM9000_DEBUGLEVEL
942 int "DM9000 maximum debug level"
943 depends on DM9000
944 default 4
945 help
946 The maximum level of debugging code compiled into the DM9000
947 driver.
948
Ben Dooksf8dd0ec2008-06-24 22:16:04 +0100949config DM9000_FORCE_SIMPLE_PHY_POLL
950 bool "Force simple NSR based PHY polling"
951 depends on DM9000
952 ---help---
953 This configuration forces the DM9000 to use the NSR's LinkStatus
954 bit to determine if the link is up or down instead of the more
955 costly MII PHY reads. Note, this will not work if the chip is
956 operating with an external PHY.
957
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +0100958config ENC28J60
959 tristate "ENC28J60 support"
960 depends on EXPERIMENTAL && SPI && NET_ETHERNET
961 select CRC32
962 ---help---
963 Support for the Microchip EN28J60 ethernet chip.
964
Johann Felix Soden2bfc79d2008-02-05 03:13:58 -0800965 To compile this driver as a module, choose M here. The module will be
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +0100966 called enc28j60.
967
968config ENC28J60_WRITEVERIFY
969 bool "Enable write verify"
970 depends on ENC28J60
971 ---help---
972 Enable the verify after the buffer write useful for debugging purpose.
973 If unsure, say N.
974
Thierry Redinga1702852009-03-27 00:12:24 -0700975config ETHOC
976 tristate "OpenCores 10/100 Mbps Ethernet MAC support"
Heiko Carstenseeb5f5c2009-03-31 14:41:02 -0700977 depends on NET_ETHERNET && HAS_IOMEM
Thierry Redinga1702852009-03-27 00:12:24 -0700978 select MII
979 select PHYLIB
Randy Dunlapc5cacb32009-04-08 15:41:25 -0700980 select CRC32
981 select BITREVERSE
Thierry Redinga1702852009-03-27 00:12:24 -0700982 help
983 Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
984
Dustin McIntire0a0c72c2006-04-19 20:24:51 -0700985config SMC911X
986 tristate "SMSC LAN911[5678] support"
987 select CRC32
988 select MII
Catalin Marinasbd2c4972008-10-20 18:15:17 +0100989 depends on ARM || SUPERH
Dustin McIntire0a0c72c2006-04-19 20:24:51 -0700990 help
991 This is a driver for SMSC's LAN911x series of Ethernet chipsets
992 including the new LAN9115, LAN9116, LAN9117, and LAN9118.
993 Say Y if you want it compiled into the kernel,
994 and read the Ethernet-HOWTO, available from
995 <http://www.linuxdoc.org/docs.html#howto>.
996
997 This driver is also available as a module. The module will be
998 called smc911x. If you want to compile it as a module, say M
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +0500999 here and read <file:Documentation/kbuild/modules.txt>
Dustin McIntire0a0c72c2006-04-19 20:24:51 -07001000
Steve Glendinningfd9abb32008-11-05 00:35:37 +00001001config SMSC911X
1002 tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
1003 depends on ARM || SUPERH
1004 select CRC32
1005 select MII
1006 select PHYLIB
1007 ---help---
1008 Say Y here if you want support for SMSC LAN911x and LAN921x families
1009 of ethernet controllers.
1010
1011 To compile this driver as a module, choose M here and read
1012 <file:Documentation/networking/net-modules.txt>. The module
1013 will be called smsc911x.
1014
Linus Torvalds1da177e2005-04-16 15:20:36 -07001015config NET_VENDOR_RACAL
1016 bool "Racal-Interlan (Micom) NI cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001017 depends on ISA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001018 help
1019 If you have a network (Ethernet) card belonging to this class, such
1020 as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
1021 available from <http://www.tldp.org/docs.html#howto>.
1022
1023 Note that the answer to this question doesn't directly affect the
1024 kernel: saying N will just cause the configurator to skip all
1025 the questions about NI cards. If you say Y, you will be asked for
1026 your specific card in the following questions.
1027
1028config NI5010
1029 tristate "NI5010 support (EXPERIMENTAL)"
1030 depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL && BROKEN_ON_SMP
1031 ---help---
1032 If you have a network (Ethernet) card of this type, say Y and read
1033 the Ethernet-HOWTO, available from
1034 <http://www.tldp.org/docs.html#howto>. Note that this is still
1035 experimental code.
1036
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001037 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001038 will be called ni5010.
1039
1040config NI52
1041 tristate "NI5210 support"
1042 depends on NET_VENDOR_RACAL && ISA
1043 help
1044 If you have a network (Ethernet) card of this type, say Y and read
1045 the Ethernet-HOWTO, available from
1046 <http://www.tldp.org/docs.html#howto>.
1047
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001048 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001049 will be called ni52.
1050
1051config NI65
1052 tristate "NI6510 support"
Al Viroa5532602005-05-04 05:39:42 +01001053 depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -07001054 help
1055 If you have a network (Ethernet) card of this type, say Y and read
1056 the Ethernet-HOWTO, available from
1057 <http://www.tldp.org/docs.html#howto>.
1058
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001059 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001060 will be called ni65.
1061
Ilya Yanok47964172009-03-11 23:26:02 -07001062config DNET
1063 tristate "Dave ethernet support (DNET)"
Ilya Yanok4b979262009-03-21 16:58:47 -07001064 depends on NET_ETHERNET && HAS_IOMEM
Ilya Yanok47964172009-03-11 23:26:02 -07001065 select PHYLIB
1066 help
1067 The Dave ethernet interface (DNET) is found on Qong Board FPGA.
1068 Say Y to include support for the DNET chip.
1069
1070 To compile this driver as a module, choose M here: the module
1071 will be called dnet.
1072
Linus Torvalds1da177e2005-04-16 15:20:36 -07001073source "drivers/net/tulip/Kconfig"
1074
1075config AT1700
1076 tristate "AT1700/1720 support (EXPERIMENTAL)"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001077 depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001078 select CRC32
1079 ---help---
1080 If you have a network (Ethernet) card of this type, say Y and read
1081 the Ethernet-HOWTO, available from
1082 <http://www.tldp.org/docs.html#howto>.
1083
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001084 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001085 will be called at1700.
1086
1087config DEPCA
1088 tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001089 depends on ISA || EISA || MCA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001090 select CRC32
1091 ---help---
1092 If you have a network (Ethernet) card of this type, say Y and read
1093 the Ethernet-HOWTO, available from
1094 <http://www.tldp.org/docs.html#howto> as well as
1095 <file:drivers/net/depca.c>.
1096
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001097 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001098 will be called depca.
1099
1100config HP100
1101 tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001102 depends on ISA || EISA || PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001103 help
1104 If you have a network (Ethernet) card of this type, say Y and read
1105 the Ethernet-HOWTO, available from
1106 <http://www.tldp.org/docs.html#howto>.
1107
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001108 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001109 will be called hp100.
1110
1111config NET_ISA
1112 bool "Other ISA cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001113 depends on ISA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001114 ---help---
1115 If your network (Ethernet) card hasn't been mentioned yet and its
1116 bus system (that's the way the cards talks to the other components
1117 of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y.
1118 Make sure you know the name of your card. Read the Ethernet-HOWTO,
1119 available from <http://www.tldp.org/docs.html#howto>.
1120
1121 If unsure, say Y.
1122
1123 Note that the answer to this question doesn't directly affect the
1124 kernel: saying N will just cause the configurator to skip all
1125 the remaining ISA network card questions. If you say Y, you will be
1126 asked for your specific card in the following questions.
1127
1128config E2100
1129 tristate "Cabletron E21xx support"
1130 depends on NET_ISA
1131 select CRC32
1132 help
1133 If you have a network (Ethernet) card of this type, say Y and read
1134 the Ethernet-HOWTO, available from
1135 <http://www.tldp.org/docs.html#howto>.
1136
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001137 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001138 will be called e2100.
1139
1140config EWRK3
1141 tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
1142 depends on NET_ISA
1143 select CRC32
1144 ---help---
1145 This driver supports the DE203, DE204 and DE205 network (Ethernet)
1146 cards. If this is for you, say Y and read
1147 <file:Documentation/networking/ewrk3.txt> in the kernel source as
1148 well as the Ethernet-HOWTO, available from
1149 <http://www.tldp.org/docs.html#howto>.
1150
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001151 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001152 will be called ewrk3.
1153
1154config EEXPRESS
1155 tristate "EtherExpress 16 support"
1156 depends on NET_ISA
1157 ---help---
1158 If you have an EtherExpress16 network (Ethernet) card, say Y and
1159 read the Ethernet-HOWTO, available from
1160 <http://www.tldp.org/docs.html#howto>. Note that the Intel
1161 EtherExpress16 card used to be regarded as a very poor choice
1162 because the driver was very unreliable. We now have a new driver
1163 that should do better.
1164
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001165 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001166 will be called eexpress.
1167
1168config EEXPRESS_PRO
1169 tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
1170 depends on NET_ISA
1171 ---help---
1172 If you have a network (Ethernet) card of this type, say Y. This
Jon Mason47c51432006-02-12 11:53:04 -06001173 driver supports Intel i82595{FX,TX} based boards. Note however
Linus Torvalds1da177e2005-04-16 15:20:36 -07001174 that the EtherExpress PRO/100 Ethernet card has its own separate
1175 driver. Please read the Ethernet-HOWTO, available from
1176 <http://www.tldp.org/docs.html#howto>.
1177
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001178 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001179 will be called eepro.
1180
Linus Torvalds1da177e2005-04-16 15:20:36 -07001181config HPLAN_PLUS
1182 tristate "HP PCLAN+ (27247B and 27252A) support"
1183 depends on NET_ISA
1184 select CRC32
1185 help
1186 If you have a network (Ethernet) card of this type, say Y and read
1187 the Ethernet-HOWTO, available from
1188 <http://www.tldp.org/docs.html#howto>.
1189
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001190 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001191 will be called hp-plus.
1192
1193config HPLAN
1194 tristate "HP PCLAN (27245 and other 27xxx series) support"
1195 depends on NET_ISA
1196 select CRC32
1197 help
1198 If you have a network (Ethernet) card of this type, say Y and read
1199 the Ethernet-HOWTO, available from
1200 <http://www.tldp.org/docs.html#howto>.
1201
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001202 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001203 will be called hp.
1204
1205config LP486E
1206 tristate "LP486E on board Ethernet"
1207 depends on NET_ISA
1208 help
1209 Say Y here to support the 82596-based on-board Ethernet controller
1210 for the Panther motherboard, which is one of the two shipped in the
1211 Intel Professional Workstation.
1212
1213config ETH16I
1214 tristate "ICL EtherTeam 16i/32 support"
1215 depends on NET_ISA
1216 help
1217 If you have a network (Ethernet) card of this type, say Y and read
1218 the Ethernet-HOWTO, available from
1219 <http://www.tldp.org/docs.html#howto>.
1220
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001221 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001222 will be called eth16i.
1223
1224config NE2000
1225 tristate "NE2000/NE1000 support"
Atsushi Nemotoc7e65c12008-08-08 00:55:17 +09001226 depends on NET_ISA || (Q40 && m) || M32R || MACH_TX49XX
Linus Torvalds1da177e2005-04-16 15:20:36 -07001227 select CRC32
1228 ---help---
1229 If you have a network (Ethernet) card of this type, say Y and read
1230 the Ethernet-HOWTO, available from
1231 <http://www.tldp.org/docs.html#howto>. Many Ethernet cards
1232 without a specific driver are compatible with NE2000.
1233
1234 If you have a PCI NE2000 card however, say N here and Y to "PCI
Jesper Juhl28beaf62006-03-08 00:06:31 -08001235 NE2000 and clone support" under "EISA, VLB, PCI and on board
1236 controllers" below. If you have a NE2000 card and are running on
Linus Torvalds1da177e2005-04-16 15:20:36 -07001237 an MCA system (a bus system used on some IBM PS/2 computers and
1238 laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
1239 below.
1240
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001241 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001242 will be called ne.
1243
1244config ZNET
1245 tristate "Zenith Z-Note support (EXPERIMENTAL)"
Al Viroa5532602005-05-04 05:39:42 +01001246 depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -07001247 help
1248 The Zenith Z-Note notebook computer has a built-in network
1249 (Ethernet) card, and this is the Linux driver for it. Note that the
1250 IBM Thinkpad 300 is compatible with the Z-Note and is also supported
1251 by this driver. Read the Ethernet-HOWTO, available from
1252 <http://www.tldp.org/docs.html#howto>.
1253
1254config SEEQ8005
1255 tristate "SEEQ8005 support (EXPERIMENTAL)"
1256 depends on NET_ISA && EXPERIMENTAL
1257 help
1258 This is a driver for the SEEQ 8005 network (Ethernet) card. If this
1259 is for you, read the Ethernet-HOWTO, available from
1260 <http://www.tldp.org/docs.html#howto>.
1261
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001262 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001263 will be called seeq8005.
1264
Linus Torvalds1da177e2005-04-16 15:20:36 -07001265config NE2_MCA
1266 tristate "NE/2 (ne2000 MCA version) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001267 depends on MCA_LEGACY
Linus Torvalds1da177e2005-04-16 15:20:36 -07001268 select CRC32
1269 help
1270 If you have a network (Ethernet) card of this type, say Y and read
1271 the Ethernet-HOWTO, available from
1272 <http://www.tldp.org/docs.html#howto>.
1273
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001274 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001275 will be called ne2.
1276
1277config IBMLANA
1278 tristate "IBM LAN Adapter/A support"
Adrian Bunke6353f32008-01-30 22:02:35 +02001279 depends on MCA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001280 ---help---
1281 This is a Micro Channel Ethernet adapter. You need to set
1282 CONFIG_MCA to use this driver. It is both available as an in-kernel
1283 driver and as a module.
1284
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001285 To compile this driver as a module, choose M here. The only
Linus Torvalds1da177e2005-04-16 15:20:36 -07001286 currently supported card is the IBM LAN Adapter/A for Ethernet. It
1287 will both support 16K and 32K memory windows, however a 32K window
1288 gives a better security against packet losses. Usage of multiple
1289 boards with this driver should be possible, but has not been tested
1290 up to now due to lack of hardware.
1291
1292config IBMVETH
1293 tristate "IBM LAN Virtual Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001294 depends on PPC_PSERIES
Linus Torvalds1da177e2005-04-16 15:20:36 -07001295 ---help---
1296 This driver supports virtual ethernet adapters on newer IBM iSeries
1297 and pSeries systems.
1298
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001299 To compile this driver as a module, choose M here. The module will
Linus Torvalds1da177e2005-04-16 15:20:36 -07001300 be called ibmveth.
1301
David Gibson1d3bb992007-08-23 13:56:01 +10001302source "drivers/net/ibm_newemac/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001303
1304config NET_PCI
1305 bool "EISA, VLB, PCI and on board controllers"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001306 depends on ISA || EISA || PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001307 help
1308 This is another class of network cards which attach directly to the
1309 bus. If you have one of those, say Y and read the Ethernet-HOWTO,
1310 available from <http://www.tldp.org/docs.html#howto>.
1311
1312 Note that the answer to this question doesn't directly affect the
1313 kernel: saying N will just cause the configurator to skip all
1314 the questions about this class of network cards. If you say Y, you
1315 will be asked for your specific card in the following questions. If
1316 you are unsure, say Y.
1317
1318config PCNET32
1319 tristate "AMD PCnet32 PCI support"
1320 depends on NET_PCI && PCI
1321 select CRC32
1322 select MII
1323 help
1324 If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
1325 answer Y here and read the Ethernet-HOWTO, available from
1326 <http://www.tldp.org/docs.html#howto>.
1327
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001328 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001329 will be called pcnet32.
1330
1331config AMD8111_ETH
1332 tristate "AMD 8111 (new PCI lance) support"
1333 depends on NET_PCI && PCI
1334 select CRC32
1335 select MII
1336 help
1337 If you have an AMD 8111-based PCI lance ethernet card,
1338 answer Y here and read the Ethernet-HOWTO, available from
1339 <http://www.tldp.org/docs.html#howto>.
1340
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001341 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001342 will be called amd8111e.
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001343
Linus Torvalds1da177e2005-04-16 15:20:36 -07001344config ADAPTEC_STARFIRE
1345 tristate "Adaptec Starfire/DuraLAN support"
1346 depends on NET_PCI && PCI
1347 select CRC32
1348 select MII
1349 help
1350 Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
1351 adapter. The DuraLAN chip is used on the 64 bit PCI boards from
1352 Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
1353 driver.
1354
1355 To compile this driver as a module, choose M here: the module
1356 will be called starfire. This is recommended.
1357
Linus Torvalds1da177e2005-04-16 15:20:36 -07001358config AC3200
1359 tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
1360 depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL
1361 select CRC32
1362 help
1363 If you have a network (Ethernet) card of this type, say Y and read
1364 the Ethernet-HOWTO, available from
1365 <http://www.tldp.org/docs.html#howto>.
1366
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001367 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001368 will be called ac3200.
1369
1370config APRICOT
1371 tristate "Apricot Xen-II on board Ethernet"
1372 depends on NET_PCI && ISA
1373 help
1374 If you have a network (Ethernet) controller of this type, say Y and
1375 read the Ethernet-HOWTO, available from
1376 <http://www.tldp.org/docs.html#howto>.
1377
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001378 To compile this driver as a module, choose M here. The module
1379 will be called apricot.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001380
1381config B44
Michael Buesch753f4922007-09-19 14:20:30 -07001382 tristate "Broadcom 440x/47xx ethernet support"
Al Viro46cb69c2008-05-21 06:32:11 +01001383 depends on SSB_POSSIBLE && HAS_DMA
Michael Buesch753f4922007-09-19 14:20:30 -07001384 select SSB
Linus Torvalds1da177e2005-04-16 15:20:36 -07001385 select MII
1386 help
Michael Buesch753f4922007-09-19 14:20:30 -07001387 If you have a network (Ethernet) controller of this type, say Y
1388 or M and read the Ethernet-HOWTO, available from
Linus Torvalds1da177e2005-04-16 15:20:36 -07001389 <http://www.tldp.org/docs.html#howto>.
1390
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001391 To compile this driver as a module, choose M here. The module
1392 will be called b44.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001393
Michael Buesch753f4922007-09-19 14:20:30 -07001394# Auto-select SSB PCI-HOST support, if possible
1395config B44_PCI_AUTOSELECT
1396 bool
1397 depends on B44 && SSB_PCIHOST_POSSIBLE
1398 select SSB_PCIHOST
1399 default y
1400
1401# Auto-select SSB PCICORE driver, if possible
1402config B44_PCICORE_AUTOSELECT
1403 bool
1404 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
1405 select SSB_DRIVER_PCICORE
1406 default y
1407
1408config B44_PCI
1409 bool
1410 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
1411 default y
1412
Linus Torvalds1da177e2005-04-16 15:20:36 -07001413config FORCEDETH
Adrian Bunk82770082006-03-08 00:06:30 -08001414 tristate "nForce Ethernet support"
1415 depends on NET_PCI && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001416 help
1417 If you have a network (Ethernet) controller of this type, say Y and
1418 read the Ethernet-HOWTO, available from
1419 <http://www.tldp.org/docs.html#howto>.
1420
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001421 To compile this driver as a module, choose M here. The module
1422 will be called forcedeth.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001423
Stephen Hemmingere27cdba2006-07-31 20:37:19 -07001424config FORCEDETH_NAPI
Randy Dunlapbf45abe2007-10-18 17:16:20 -07001425 bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
Stephen Hemmingere27cdba2006-07-31 20:37:19 -07001426 depends on FORCEDETH && EXPERIMENTAL
1427 help
1428 NAPI is a new driver API designed to reduce CPU and interrupt load
1429 when the driver is receiving lots of packets from the card. It is
1430 still somewhat experimental and thus not yet enabled by default.
1431
1432 If your estimated Rx load is 10kpps or more, or if the card will be
1433 deployed on potentially unfriendly networks (e.g. in a firewall),
1434 then say Y here.
1435
Stephen Hemmingere27cdba2006-07-31 20:37:19 -07001436 If in doubt, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001437
1438config CS89x0
1439 tristate "CS89x0 support"
Gilles Chanteperdrix0ac4ed92008-09-26 15:44:43 +01001440 depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \
1441 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001442 ---help---
1443 Support for CS89x0 chipset based Ethernet cards. If you have a
1444 network (Ethernet) card of this type, say Y and read the
1445 Ethernet-HOWTO, available from
1446 <http://www.tldp.org/docs.html#howto> as well as
1447 <file:Documentation/networking/cs89x0.txt>.
1448
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001449 To compile this driver as a module, choose M here. The module
1450 will be called cs89x0.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001451
Gilles Chanteperdrix0ac4ed92008-09-26 15:44:43 +01001452config CS89x0_NONISA_IRQ
1453 def_bool y
1454 depends on CS89x0 != n
1455 depends on MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS
1456
Linus Torvalds1da177e2005-04-16 15:20:36 -07001457config TC35815
1458 tristate "TOSHIBA TC35815 Ethernet support"
Atsushi Nemotoeea221c2007-03-03 23:54:59 +09001459 depends on NET_PCI && PCI && MIPS
Atsushi Nemotoc6686fe2008-04-12 00:47:46 +09001460 select PHYLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -07001461
Linus Torvalds1da177e2005-04-16 15:20:36 -07001462config E100
1463 tristate "Intel(R) PRO/100+ support"
1464 depends on NET_PCI && PCI
1465 select MII
1466 ---help---
1467 This driver supports Intel(R) PRO/100 family of adapters.
1468 To verify that your adapter is supported, find the board ID number
1469 on the adapter. Look for a label that has a barcode and a number
1470 in the format 123456-001 (six digits hyphen three digits).
1471
1472 Use the above information and the Adapter & Driver ID Guide at:
1473
1474 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
1475
1476 to identify the adapter.
1477
1478 For the latest Intel PRO/100 network driver for Linux, see:
1479
1480 <http://appsr.intel.com/scripts-df/support_intel.asp>
1481
1482 More specific information on configuring the driver is in
1483 <file:Documentation/networking/e100.txt>.
1484
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001485 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001486 will be called e100.
1487
1488config LNE390
1489 tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
1490 depends on NET_PCI && EISA && EXPERIMENTAL
1491 select CRC32
1492 help
1493 If you have a network (Ethernet) card of this type, say Y and read
1494 the Ethernet-HOWTO, available from
1495 <http://www.tldp.org/docs.html#howto>.
1496
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001497 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001498 will be called lne390.
1499
1500config FEALNX
1501 tristate "Myson MTD-8xx PCI Ethernet support"
1502 depends on NET_PCI && PCI
1503 select CRC32
1504 select MII
1505 help
1506 Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
1507 cards. Specifications and data at
1508 <http://www.myson.com.hk/mtd/datasheet/>.
1509
1510config NATSEMI
1511 tristate "National Semiconductor DP8381x series PCI Ethernet support"
1512 depends on NET_PCI && PCI
1513 select CRC32
1514 help
1515 This driver is for the National Semiconductor DP83810 series,
1516 which is used in cards from PureData, NetGear, Linksys
1517 and others, including the 83815 chip.
1518 More specific information and updates are available from
1519 <http://www.scyld.com/network/natsemi.html>.
1520
1521config NE2K_PCI
1522 tristate "PCI NE2000 and clones support (see help)"
1523 depends on NET_PCI && PCI
1524 select CRC32
1525 ---help---
1526 This driver is for NE2000 compatible PCI cards. It will not work
1527 with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
1528 support" below). If you have a PCI NE2000 network (Ethernet) card,
1529 say Y and read the Ethernet-HOWTO, available from
1530 <http://www.tldp.org/docs.html#howto>.
1531
1532 This driver also works for the following NE2000 clone cards:
1533 RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
1534 NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
1535 Holtek HT80232 Holtek HT80229
1536
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001537 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001538 will be called ne2k-pci.
1539
1540config NE3210
1541 tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
1542 depends on NET_PCI && EISA && EXPERIMENTAL
1543 select CRC32
1544 ---help---
1545 If you have a network (Ethernet) card of this type, say Y and read
1546 the Ethernet-HOWTO, available from
1547 <http://www.tldp.org/docs.html#howto>. Note that this driver
1548 will NOT WORK for NE3200 cards as they are completely different.
1549
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001550 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001551 will be called ne3210.
1552
1553config ES3210
1554 tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
1555 depends on NET_PCI && EISA && EXPERIMENTAL
1556 select CRC32
1557 help
1558 If you have a network (Ethernet) card of this type, say Y and read
1559 the Ethernet-HOWTO, available from
1560 <http://www.tldp.org/docs.html#howto>.
1561
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001562 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001563 will be called es3210.
1564
1565config 8139CP
1566 tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
1567 depends on NET_PCI && PCI && EXPERIMENTAL
1568 select CRC32
1569 select MII
1570 help
1571 This is a driver for the Fast Ethernet PCI network cards based on
1572 the RTL8139C+ chips. If you have one of those, say Y and read
1573 the Ethernet-HOWTO, available from
1574 <http://www.tldp.org/docs.html#howto>.
1575
1576 To compile this driver as a module, choose M here: the module
1577 will be called 8139cp. This is recommended.
1578
1579config 8139TOO
Adrian Bunkf04e3f02005-05-16 21:13:03 +02001580 tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001581 depends on NET_PCI && PCI
1582 select CRC32
1583 select MII
1584 ---help---
1585 This is a driver for the Fast Ethernet PCI network cards based on
Adrian Bunkf04e3f02005-05-16 21:13:03 +02001586 the RTL 8129/8130/8139 chips. If you have one of those, say Y and
1587 read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001588
1589 To compile this driver as a module, choose M here: the module
1590 will be called 8139too. This is recommended.
1591
1592config 8139TOO_PIO
1593 bool "Use PIO instead of MMIO"
1594 default y
1595 depends on 8139TOO
1596 help
1597 This instructs the driver to use programmed I/O ports (PIO) instead
1598 of PCI shared memory (MMIO). This can possibly solve some problems
1599 in case your mainboard has memory consistency issues. If unsure,
1600 say N.
1601
1602config 8139TOO_TUNE_TWISTER
1603 bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
1604 depends on 8139TOO
1605 help
1606 This implements a function which might come in handy in case you
1607 are using low quality on long cabling. It is required for RealTek
1608 RTL-8139 revision K boards, and totally unused otherwise. It tries
1609 to match the transceiver to the cable characteristics. This is
1610 experimental since hardly documented by the manufacturer.
1611 If unsure, say Y.
1612
1613config 8139TOO_8129
1614 bool "Support for older RTL-8129/8130 boards"
1615 depends on 8139TOO
1616 help
1617 This enables support for the older and uncommon RTL-8129 and
1618 RTL-8130 chips, which support MII via an external transceiver,
1619 instead of an internal one. Disabling this option will save some
1620 memory by making the code size smaller. If unsure, say Y.
1621
1622config 8139_OLD_RX_RESET
1623 bool "Use older RX-reset method"
1624 depends on 8139TOO
1625 help
1626 The 8139too driver was recently updated to contain a more rapid
1627 reset sequence, in the face of severe receive errors. This "new"
1628 RX-reset method should be adequate for all boards. But if you
1629 experience problems, you can enable this option to restore the
1630 old RX-reset behavior. If unsure, say N.
1631
Sten Wang7a47dd72007-11-12 21:31:11 -08001632config R6040
Florian Fainelli68334112009-01-08 15:04:50 +00001633 tristate "RDC R6040 Fast Ethernet Adapter support"
Sten Wang7a47dd72007-11-12 21:31:11 -08001634 depends on NET_PCI && PCI
1635 select CRC32
1636 select MII
1637 help
1638 This is a driver for the R6040 Fast Ethernet MACs found in the
1639 the RDC R-321x System-on-chips.
1640
1641 To compile this driver as a module, choose M here: the module
1642 will be called r6040. This is recommended.
1643
Linus Torvalds1da177e2005-04-16 15:20:36 -07001644config SIS900
1645 tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
1646 depends on NET_PCI && PCI
1647 select CRC32
Adrian Bunk6da0f682005-04-30 13:52:49 +02001648 select MII
Linus Torvalds1da177e2005-04-16 15:20:36 -07001649 ---help---
1650 This is a driver for the Fast Ethernet PCI network cards based on
1651 the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
Adrian Bunkc3cf5602006-03-04 17:07:57 +01001652 SiS 630 and SiS 540 chipsets.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001653
1654 This driver also supports AMD 79C901 HomePNA so that you can use
1655 your phone line as a network cable.
1656
1657 To compile this driver as a module, choose M here: the module
1658 will be called sis900. This is recommended.
1659
1660config EPIC100
1661 tristate "SMC EtherPower II"
1662 depends on NET_PCI && PCI
1663 select CRC32
1664 select MII
1665 help
1666 This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
1667 which is based on the SMC83c17x (EPIC/100).
1668 More specific information and updates are available from
1669 <http://www.scyld.com/network/epic100.html>.
1670
Steve Glendinning2cb37722008-12-11 20:54:30 -08001671config SMSC9420
1672 tristate "SMSC LAN9420 PCI ethernet adapter support"
1673 depends on NET_PCI && PCI
1674 select CRC32
1675 select PHYLIB
1676 select SMSC_PHY
1677 help
1678 This is a driver for SMSC's LAN9420 PCI ethernet adapter.
1679 Say Y if you want it compiled into the kernel,
1680 and read the Ethernet-HOWTO, available from
1681 <http://www.linuxdoc.org/docs.html#howto>.
1682
1683 This driver is also available as a module. The module will be
1684 called smsc9420. If you want to compile it as a module, say M
1685 here and read <file:Documentation/kbuild/modules.txt>
1686
Linus Torvalds1da177e2005-04-16 15:20:36 -07001687config SUNDANCE
1688 tristate "Sundance Alta support"
1689 depends on NET_PCI && PCI
1690 select CRC32
1691 select MII
1692 help
1693 This driver is for the Sundance "Alta" chip.
1694 More specific information and updates are available from
1695 <http://www.scyld.com/network/sundance.html>.
1696
1697config SUNDANCE_MMIO
1698 bool "Use MMIO instead of PIO"
1699 depends on SUNDANCE
1700 help
1701 Enable memory-mapped I/O for interaction with Sundance NIC registers.
1702 Do NOT enable this by default, PIO (enabled when MMIO is disabled)
1703 is known to solve bugs on certain chips.
1704
1705 If unsure, say N.
1706
1707config TLAN
1708 tristate "TI ThunderLAN support"
Stephen Hemminger93e16842008-05-30 09:49:55 -07001709 depends on NET_PCI && (PCI || EISA)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001710 ---help---
1711 If you have a PCI Ethernet network card based on the ThunderLAN chip
1712 which is supported by this driver, say Y and read the
1713 Ethernet-HOWTO, available from
1714 <http://www.tldp.org/docs.html#howto>.
1715
1716 Devices currently supported by this driver are Compaq Netelligent,
1717 Compaq NetFlex and Olicom cards. Please read the file
1718 <file:Documentation/networking/tlan.txt> for more details.
1719
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001720 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001721 will be called tlan.
1722
1723 Please email feedback to <torben.mathiasen@compaq.com>.
1724
1725config VIA_RHINE
1726 tristate "VIA Rhine support"
1727 depends on NET_PCI && PCI
1728 select CRC32
1729 select MII
1730 help
1731 If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
1732 Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
1733 Ethernet functions can also be found integrated on South Bridges
1734 (e.g. VT8235).
1735
1736 To compile this driver as a module, choose M here. The module
1737 will be called via-rhine.
1738
1739config VIA_RHINE_MMIO
1740 bool "Use MMIO instead of PIO"
1741 depends on VIA_RHINE
1742 help
1743 This instructs the driver to use PCI shared memory (MMIO) instead of
1744 programmed I/O ports (PIO). Enabling this gives an improvement in
1745 processing time in parts of the driver.
1746
1747 If unsure, say Y.
1748
Cesar Eduardo Barrosbf345702006-12-19 13:08:47 -08001749config SC92031
1750 tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
1751 depends on NET_PCI && PCI && EXPERIMENTAL
1752 select CRC32
1753 ---help---
1754 This is a driver for the Fast Ethernet PCI network cards based on
1755 the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
1756 have one of these, say Y here.
1757
1758 To compile this driver as a module, choose M here: the module
1759 will be called sc92031. This is recommended.
1760
Matteo Croced95b39c2007-10-14 18:10:13 +02001761config CPMAC
1762 tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
Anton Vorontsov8353ec72008-01-21 23:49:53 +03001763 depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN
Matteo Croced95b39c2007-10-14 18:10:13 +02001764 select PHYLIB
Matteo Croced95b39c2007-10-14 18:10:13 +02001765 help
1766 TI AR7 CPMAC Ethernet support
1767
Linus Torvalds1da177e2005-04-16 15:20:36 -07001768config NET_POCKET
1769 bool "Pocket and portable adapters"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001770 depends on PARPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001771 ---help---
1772 Cute little network (Ethernet) devices which attach to the parallel
1773 port ("pocket adapters"), commonly used with laptops. If you have
1774 one of those, say Y and read the Ethernet-HOWTO, available from
1775 <http://www.tldp.org/docs.html#howto>.
1776
1777 If you want to plug a network (or some other) card into the PCMCIA
1778 (or PC-card) slot of your laptop instead (PCMCIA is the standard for
1779 credit card size extension cards used by all modern laptops), you
1780 need the pcmcia-cs package (location contained in the file
1781 <file:Documentation/Changes>) and you can say N here.
1782
1783 Laptop users should read the Linux Laptop home page at
1784 <http://www.linux-on-laptops.com/> or
1785 Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>.
1786
1787 Note that the answer to this question doesn't directly affect the
1788 kernel: saying N will just cause the configurator to skip all
1789 the questions about this class of network devices. If you say Y, you
1790 will be asked for your specific device in the following questions.
1791
1792config ATP
1793 tristate "AT-LAN-TEC/RealTek pocket adapter support"
Grant Coady32fa2bf2005-09-10 00:14:05 +10001794 depends on NET_POCKET && PARPORT && X86
Linus Torvalds1da177e2005-04-16 15:20:36 -07001795 select CRC32
1796 ---help---
1797 This is a network (Ethernet) device which attaches to your parallel
1798 port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
1799 available from <http://www.tldp.org/docs.html#howto>, if you
1800 want to use this. If you intend to use this driver, you should have
1801 said N to the "Parallel printer support", because the two drivers
1802 don't like each other.
1803
1804 To compile this driver as a module, choose M here: the module
1805 will be called atp.
1806
1807config DE600
1808 tristate "D-Link DE600 pocket adapter support"
Grant Coady32fa2bf2005-09-10 00:14:05 +10001809 depends on NET_POCKET && PARPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001810 ---help---
1811 This is a network (Ethernet) device which attaches to your parallel
1812 port. Read <file:Documentation/networking/DLINK.txt> as well as the
1813 Ethernet-HOWTO, available from
1814 <http://www.tldp.org/docs.html#howto>, if you want to use
1815 this. It is possible to have several devices share a single parallel
1816 port and it is safe to compile the corresponding drivers into the
1817 kernel.
1818
1819 To compile this driver as a module, choose M here: the module
1820 will be called de600.
1821
1822config DE620
1823 tristate "D-Link DE620 pocket adapter support"
Grant Coady32fa2bf2005-09-10 00:14:05 +10001824 depends on NET_POCKET && PARPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001825 ---help---
1826 This is a network (Ethernet) device which attaches to your parallel
1827 port. Read <file:Documentation/networking/DLINK.txt> as well as the
1828 Ethernet-HOWTO, available from
1829 <http://www.tldp.org/docs.html#howto>, if you want to use
1830 this. It is possible to have several devices share a single parallel
1831 port and it is safe to compile the corresponding drivers into the
1832 kernel.
1833
1834 To compile this driver as a module, choose M here: the module
1835 will be called de620.
1836
1837config SGISEEQ
1838 tristate "SGI Seeq ethernet controller support"
Thomas Bogendoerfer49b11bc2007-12-19 13:42:36 +01001839 depends on SGI_HAS_SEEQ
Linus Torvalds1da177e2005-04-16 15:20:36 -07001840 help
1841 Say Y here if you have an Seeq based Ethernet network card. This is
1842 used in many Silicon Graphics machines.
1843
1844config DECLANCE
1845 tristate "DEC LANCE ethernet controller support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001846 depends on MACH_DECSTATION
Linus Torvalds1da177e2005-04-16 15:20:36 -07001847 select CRC32
1848 help
1849 This driver is for the series of Ethernet controllers produced by
1850 DEC (now Compaq) based on the AMD Lance chipset, including the
1851 DEPCA series. (This chipset is better known via the NE2100 cards.)
1852
1853config 68360_ENET
1854 bool "Motorola 68360 ethernet controller"
1855 depends on M68360
1856 help
1857 Say Y here if you want to use the built-in ethernet controller of
1858 the Motorola 68360 processor.
1859
1860config FEC
Greg Ungerer2af69212005-09-12 11:18:10 +10001861 bool "FEC ethernet controller (of ColdFire CPUs)"
David S. Millerb3ff29d2009-02-03 00:15:35 -08001862 depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27
Linus Torvalds1da177e2005-04-16 15:20:36 -07001863 help
1864 Say Y here if you want to use the built-in 10/100 Fast ethernet
Sascha Hauer196719e2009-01-28 23:03:10 +00001865 controller on some Motorola ColdFire and Freescale i.MX processors.
Greg Ungerer2af69212005-09-12 11:18:10 +10001866
1867config FEC2
1868 bool "Second FEC ethernet controller (on some ColdFire CPUs)"
1869 depends on FEC
1870 help
1871 Say Y here if you want to use the second built-in 10/100 Fast
1872 ethernet controller on some Motorola ColdFire processors.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001873
Domen Puncer5d031e92007-10-26 18:07:49 +02001874config FEC_MPC52xx
1875 tristate "MPC52xx FEC driver"
Grant Likely847cdf42008-11-14 05:19:00 -07001876 depends on PPC_MPC52xx && PPC_BESTCOMM
Domen Puncer5d031e92007-10-26 18:07:49 +02001877 select CRC32
1878 select PHYLIB
Grant Likely847cdf42008-11-14 05:19:00 -07001879 select PPC_BESTCOMM_FEC
Domen Puncer5d031e92007-10-26 18:07:49 +02001880 ---help---
1881 This option enables support for the MPC5200's on-chip
1882 Fast Ethernet Controller
1883 If compiled as module, it will be called 'fec_mpc52xx.ko'.
1884
1885config FEC_MPC52xx_MDIO
1886 bool "MPC52xx FEC MDIO bus driver"
1887 depends on FEC_MPC52xx
1888 default y
1889 ---help---
1890 The MPC5200's FEC can connect to the Ethernet either with
1891 an external MII PHY chip or 10 Mbps 7-wire interface
1892 (Motorola? industry standard).
1893 If your board uses an external PHY connected to FEC, enable this.
1894 If not sure, enable.
1895 If compiled as module, it will be called 'fec_mpc52xx_phy.ko'.
1896
Linus Torvalds1da177e2005-04-16 15:20:36 -07001897config NE_H8300
1898 tristate "NE2000 compatible support for H8/300"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001899 depends on H8300
Linus Torvalds1da177e2005-04-16 15:20:36 -07001900 help
1901 Say Y here if you want to use the NE2000 compatible
1902 controller on the Renesas H8/300 processor.
1903
Chris Snook452c1ce2008-09-14 19:56:10 -05001904config ATL2
1905 tristate "Atheros L2 Fast Ethernet support"
1906 depends on PCI
1907 select CRC32
1908 select MII
1909 help
1910 This driver supports the Atheros L2 fast ethernet adapter.
1911
1912 To compile this driver as a module, choose M here. The module
1913 will be called atl2.
1914
Pantelis Antoniou48257c42005-10-28 16:25:58 -04001915source "drivers/net/fs_enet/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001916
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001917endif # NET_ETHERNET
Linus Torvalds1da177e2005-04-16 15:20:36 -07001918
1919#
1920# Gigabit Ethernet
1921#
1922
Jan Engelhardtf30486d2007-05-10 22:52:56 -07001923menuconfig NETDEV_1000
1924 bool "Ethernet (1000 Mbit)"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07001925 depends on !UML
Jan Engelhardtf30486d2007-05-10 22:52:56 -07001926 default y
Jan Engelhardt06bfb7e2007-08-18 12:56:21 +02001927 ---help---
1928 Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
1929 type of Local Area Network (LAN) in universities and companies.
1930
1931 Say Y here to get to see options for Gigabit Ethernet drivers.
1932 This option alone does not add any kernel code.
1933 Note that drivers supporting both 100 and 1000 MBit may be listed
1934 under "Ethernet (10 or 100MBit)" instead.
1935
1936 If you say N, all options in this submenu will be skipped and disabled.
Jan Engelhardtf30486d2007-05-10 22:52:56 -07001937
1938if NETDEV_1000
Linus Torvalds1da177e2005-04-16 15:20:36 -07001939
1940config ACENIC
1941 tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
1942 depends on PCI
1943 ---help---
1944 Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
1945 GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
1946 adapter. The driver allows for using the Jumbo Frame option (9000
1947 bytes/frame) however it requires that your switches can handle this
1948 as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
1949 line.
1950
1951 To compile this driver as a module, choose M here: the
1952 module will be called acenic.
1953
1954config ACENIC_OMIT_TIGON_I
1955 bool "Omit support for old Tigon I based AceNICs"
1956 depends on ACENIC
1957 help
1958 Say Y here if you only have Tigon II based AceNICs and want to leave
1959 out support for the older Tigon I based cards which are no longer
1960 being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
1961 version)). This will reduce the size of the driver object by
1962 app. 100KB. If you are not sure whether your card is a Tigon I or a
1963 Tigon II, say N here.
1964
1965 The safe and default value for this is N.
1966
1967config DL2K
Komurodf950822007-08-13 09:45:41 +09001968 tristate "DL2000/TC902x-based Gigabit Ethernet support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001969 depends on PCI
1970 select CRC32
1971 help
Komurodf950822007-08-13 09:45:41 +09001972 This driver supports DL2000/TC902x-based Gigabit ethernet cards,
1973 which includes
Linus Torvalds1da177e2005-04-16 15:20:36 -07001974 D-Link DGE-550T Gigabit Ethernet Adapter.
1975 D-Link DL2000-based Gigabit Ethernet Adapter.
Komurodf950822007-08-13 09:45:41 +09001976 Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001977
1978 To compile this driver as a module, choose M here: the
1979 module will be called dl2k.
1980
1981config E1000
1982 tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
1983 depends on PCI
1984 ---help---
1985 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
1986 adapters. For more information on how to identify your adapter, go
1987 to the Adapter & Driver ID Guide at:
1988
1989 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
1990
1991 For general information and support, go to the Intel support
1992 website at:
1993
1994 <http://support.intel.com>
1995
1996 More specific information on configuring the driver is in
1997 <file:Documentation/networking/e1000.txt>.
1998
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001999 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07002000 will be called e1000.
2001
Auke Kokbc7f75f2007-09-17 12:30:59 -07002002config E1000E
2003 tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
Al Viro7ac86bf2008-04-27 06:15:42 +01002004 depends on PCI && (!SPARC32 || BROKEN)
Auke Kokbc7f75f2007-09-17 12:30:59 -07002005 ---help---
2006 This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
2007 ethernet family of adapters. For PCI or PCI-X e1000 adapters,
2008 use the regular e1000 driver For more information on how to
2009 identify your adapter, go to the Adapter & Driver ID Guide at:
2010
2011 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
2012
2013 For general information and support, go to the Intel support
2014 website at:
2015
2016 <http://support.intel.com>
2017
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002018 To compile this driver as a module, choose M here. The module
Auke Kokbc7f75f2007-09-17 12:30:59 -07002019 will be called e1000e.
2020
Stephen Hemmingerab7a9832008-01-01 09:27:58 -08002021config IP1000
2022 tristate "IP1000 Gigabit Ethernet support"
2023 depends on PCI && EXPERIMENTAL
2024 select MII
2025 ---help---
2026 This driver supports IP1000 gigabit Ethernet cards.
2027
2028 To compile this driver as a module, choose M here: the module
2029 will be called ipg. This is recommended.
2030
Auke Kok9d5c8242008-01-24 02:22:38 -08002031config IGB
Alexander Duyck3ef6b232008-11-20 00:46:57 -08002032 tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
Auke Kok9d5c8242008-01-24 02:22:38 -08002033 depends on PCI
2034 ---help---
Alexander Duyck3ef6b232008-11-20 00:46:57 -08002035 This driver supports Intel(R) 82575/82576 gigabit ethernet family of
Auke Kok9d5c8242008-01-24 02:22:38 -08002036 adapters. For more information on how to identify your adapter, go
2037 to the Adapter & Driver ID Guide at:
2038
2039 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
2040
2041 For general information and support, go to the Intel support
2042 website at:
2043
2044 <http://support.intel.com>
2045
2046 More specific information on configuring the driver is in
2047 <file:Documentation/networking/e1000.txt>.
2048
Johann Felix Soden2bfc79d2008-02-05 03:13:58 -08002049 To compile this driver as a module, choose M here. The module
Auke Kok9d5c8242008-01-24 02:22:38 -08002050 will be called igb.
2051
Jeff Kirsher421e02f2008-10-17 11:08:31 -07002052config IGB_DCA
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002053 bool "Direct Cache Access (DCA) Support"
Jeff Kirsher421e02f2008-10-17 11:08:31 -07002054 default y
2055 depends on IGB && DCA && !(IGB=y && DCA=m)
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002056 ---help---
2057 Say Y here if you want to use Direct Cache Access (DCA) in the
2058 driver. DCA is a method for warming the CPU cache before data
2059 is used, with the intent of lessening the impact of cache misses.
Jeff Kirsher421e02f2008-10-17 11:08:31 -07002060
Alexander Duyckd4e0fe02009-04-07 14:37:34 +00002061config IGBVF
2062 tristate "Intel(R) 82576 Virtual Function Ethernet support"
2063 depends on PCI
2064 ---help---
2065 This driver supports Intel(R) 82576 virtual functions. For more
2066 information on how to identify your adapter, go to the Adapter &
2067 Driver ID Guide at:
2068
2069 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
2070
2071 For general information and support, go to the Intel support
2072 website at:
2073
2074 <http://support.intel.com>
2075
2076 More specific information on configuring the driver is in
2077 <file:Documentation/networking/e1000.txt>.
2078
2079 To compile this driver as a module, choose M here. The module
2080 will be called igbvf.
2081
Lennert Buytenhek15d014d2005-11-11 18:23:13 +01002082source "drivers/net/ixp2000/Kconfig"
2083
Linus Torvalds1da177e2005-04-16 15:20:36 -07002084config MYRI_SBUS
2085 tristate "MyriCOM Gigabit Ethernet support"
2086 depends on SBUS
2087 help
2088 This driver supports MyriCOM Sbus gigabit Ethernet cards.
2089
2090 To compile this driver as a module, choose M here: the module
2091 will be called myri_sbus. This is recommended.
2092
2093config NS83820
Jon Mason47c51432006-02-12 11:53:04 -06002094 tristate "National Semiconductor DP83820 support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07002095 depends on PCI
2096 help
2097 This is a driver for the National Semiconductor DP83820 series
2098 of gigabit ethernet MACs. Cards using this chipset include
2099 the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
2100 SOHO-GA2000T, SOHO-GA2500T. The driver supports the use of
2101 zero copy.
2102
2103config HAMACHI
2104 tristate "Packet Engines Hamachi GNIC-II support"
2105 depends on PCI
2106 select MII
2107 help
2108 If you have a Gigabit Ethernet card of this type, say Y and read
2109 the Ethernet-HOWTO, available from
2110 <http://www.tldp.org/docs.html#howto>.
2111
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002112 To compile this driver as a module, choose M here. The module will be
Linus Torvalds1da177e2005-04-16 15:20:36 -07002113 called hamachi.
2114
2115config YELLOWFIN
2116 tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
2117 depends on PCI && EXPERIMENTAL
2118 select CRC32
2119 ---help---
2120 Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
2121 adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
2122 used by the Beowulf Linux cluster project. See
2123 <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
2124 information about this driver in particular and Beowulf in general.
2125
2126 To compile this driver as a module, choose M here: the module
2127 will be called yellowfin. This is recommended.
2128
2129config R8169
2130 tristate "Realtek 8169 gigabit ethernet support"
2131 depends on PCI
2132 select CRC32
Francois Romieub7372492008-09-13 15:04:38 +02002133 select MII
Linus Torvalds1da177e2005-04-16 15:20:36 -07002134 ---help---
2135 Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
2136
2137 To compile this driver as a module, choose M here: the module
2138 will be called r8169. This is recommended.
2139
Linus Torvalds1da177e2005-04-16 15:20:36 -07002140config R8169_VLAN
2141 bool "VLAN support"
2142 depends on R8169 && VLAN_8021Q
2143 ---help---
2144 Say Y here for the r8169 driver to support the functions required
2145 by the kernel 802.1Q code.
Francois Romieu865c6522008-05-11 14:51:00 +02002146
Linus Torvalds1da177e2005-04-16 15:20:36 -07002147 If in doubt, say Y.
2148
Maciej W. Rozycki1a9e8542007-09-14 12:05:00 +01002149config SB1250_MAC
Maciej W. Rozycki25a72df2007-09-14 11:57:33 +01002150 tristate "SB1250 Gigabit Ethernet support"
2151 depends on SIBYTE_SB1xxx_SOC
Maciej W. Rozyckif5279ff2007-09-21 12:52:10 +01002152 select PHYLIB
Maciej W. Rozycki25a72df2007-09-14 11:57:33 +01002153 ---help---
2154 This driver supports Gigabit Ethernet interfaces based on the
2155 Broadcom SiByte family of System-On-a-Chip parts. They include
2156 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
2157 and BCM1480 chips.
2158
2159 To compile this driver as a module, choose M here: the module
2160 will be called sb1250-mac.
2161
Francois Romieu890e8d02005-07-30 13:08:43 +02002162config SIS190
Francois Romieue7976372005-09-03 00:57:51 +02002163 tristate "SiS190/SiS191 gigabit ethernet support"
Adrian Bunke9985d52005-08-09 02:41:00 +02002164 depends on PCI
2165 select CRC32
2166 select MII
2167 ---help---
Francois Romieue7976372005-09-03 00:57:51 +02002168 Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
2169 a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
2170 appear in lan on motherboard designs which are based on SiS 965
2171 and SiS 966 south bridge.
Francois Romieu890e8d02005-07-30 13:08:43 +02002172
Adrian Bunke9985d52005-08-09 02:41:00 +02002173 To compile this driver as a module, choose M here: the module
2174 will be called sis190. This is recommended.
Francois Romieu890e8d02005-07-30 13:08:43 +02002175
Stephen Hemmingerbaef58b2005-05-12 20:14:36 -04002176config SKGE
Stephen Hemminger7a160c72006-02-13 15:48:08 -08002177 tristate "New SysKonnect GigaEthernet support"
2178 depends on PCI
Stephen Hemmingerbaef58b2005-05-12 20:14:36 -04002179 select CRC32
2180 ---help---
2181 This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
2182 and related Gigabit Ethernet adapters. It is a new smaller driver
Stephen Hemminger46a60f22005-09-09 12:54:56 -07002183 with better performance and more complete ethtool support.
Stephen Hemmingerbaef58b2005-05-12 20:14:36 -04002184
2185 It does not support the link failover and network management
Stephen Hemminger5ad887f2007-09-15 19:35:14 -04002186 features that "portable" vendor supplied sk98lin driver does.
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002187
Daniel Drakec6f0d752006-01-21 19:35:34 +00002188 This driver supports adapters based on the original Yukon chipset:
2189 Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
2190 Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
2191
2192 It does not support the newer Yukon2 chipset: a separate driver,
2193 sky2, is provided for Yukon2-based adapters.
2194
2195 To compile this driver as a module, choose M here: the module
2196 will be called skge. This is recommended.
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002197
Stephen Hemminger678aa1f2007-10-16 12:15:54 -07002198config SKGE_DEBUG
2199 bool "Debugging interface"
2200 depends on SKGE && DEBUG_FS
2201 help
2202 This option adds the ability to dump driver state for debugging.
2203 The file debugfs/skge/ethX displays the state of the internal
2204 transmit and receive rings.
2205
2206 If unsure, say N.
2207
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002208config SKY2
Stephen Hemminger8a3e3bf2007-07-09 15:33:38 -07002209 tristate "SysKonnect Yukon2 support"
Stephen Hemmingerf479b322006-10-27 10:22:10 -07002210 depends on PCI
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002211 select CRC32
2212 ---help---
Matt LaPlantecab00892006-10-03 22:36:44 +02002213 This driver supports Gigabit Ethernet adapters based on the
Daniel Drakec6f0d752006-01-21 19:35:34 +00002214 Marvell Yukon 2 chipset:
2215 Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
2216 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
2217
Stephen Hemmingerf479b322006-10-27 10:22:10 -07002218 There is companion driver for the older Marvell Yukon and
2219 Genesis based adapters: skge.
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002220
2221 To compile this driver as a module, choose M here: the module
2222 will be called sky2. This is recommended.
2223
Stephen Hemminger3cf26752007-07-09 15:33:35 -07002224config SKY2_DEBUG
2225 bool "Debugging interface"
2226 depends on SKY2 && DEBUG_FS
2227 help
2228 This option adds the ability to dump driver state for debugging.
2229 The file debugfs/sky2/ethX displays the state of the internal
2230 transmit and receive rings.
Daniel Drakec6f0d752006-01-21 19:35:34 +00002231
Stephen Hemminger3cf26752007-07-09 15:33:35 -07002232 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002233
2234config VIA_VELOCITY
2235 tristate "VIA Velocity support"
Yoichi Yuasa73815532007-05-24 16:12:27 +09002236 depends on PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07002237 select CRC32
2238 select CRC_CCITT
2239 select MII
2240 help
2241 If you have a VIA "Velocity" based network card say Y here.
2242
2243 To compile this driver as a module, choose M here. The module
2244 will be called via-velocity.
2245
2246config TIGON3
2247 tristate "Broadcom Tigon3 support"
2248 depends on PCI
Matt Carlson158d7ab2008-05-29 01:37:54 -07002249 select PHYLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -07002250 help
2251 This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
2252
2253 To compile this driver as a module, choose M here: the module
2254 will be called tg3. This is recommended.
2255
Michael Chanb6016b72005-05-26 13:03:09 -07002256config BNX2
2257 tristate "Broadcom NetXtremeII support"
2258 depends on PCI
Michael Chanfba9fe92006-06-12 22:21:25 -07002259 select CRC32
Michael Chan57579f72009-04-04 16:51:14 -07002260 select FW_LOADER
Michael Chanb6016b72005-05-26 13:03:09 -07002261 help
2262 This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
2263
2264 To compile this driver as a module, choose M here: the module
2265 will be called bnx2. This is recommended.
2266
Michael Chana4636962009-06-08 18:14:43 -07002267config CNIC
2268 tristate "Broadcom CNIC support"
2269 depends on BNX2
2270 depends on UIO
2271 help
2272 This driver supports offload features of Broadcom NetXtremeII
2273 gigabit Ethernet cards.
2274
2275 To compile this driver as a module, choose M here: the module
2276 will be called cnic. This is recommended.
2277
Jens Osterkampaaec0fa2005-09-05 15:19:29 -07002278config SPIDER_NET
2279 tristate "Spider Gigabit Ethernet driver"
Kou Ishizaki3342cf02007-02-20 16:36:14 -06002280 depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
Christoph Hellwig9b158792006-03-15 11:30:44 +01002281 select FW_LOADER
Jens Osterkampaaec0fa2005-09-05 15:19:29 -07002282 help
2283 This driver supports the Gigabit Ethernet chips present on the
2284 Cell Processor-Based Blades from IBM.
2285
Zang Roy-r619115e123b82006-11-08 19:49:13 -08002286config TSI108_ETH
2287 tristate "Tundra TSI108 gigabit Ethernet support"
2288 depends on TSI108_BRIDGE
2289 help
2290 This driver supports Tundra TSI108 gigabit Ethernet ports.
2291 To compile this driver as a module, choose M here: the module
2292 will be called tsi108_eth.
2293
Masakazu Mokuno02c18892007-07-05 20:11:16 +09002294config GELIC_NET
2295 tristate "PS3 Gigabit Ethernet driver"
2296 depends on PPC_PS3
Geoff Levand1d32e212008-04-10 07:01:53 +10002297 select PS3_SYS_MANAGER
Masakazu Mokuno02c18892007-07-05 20:11:16 +09002298 help
2299 This driver supports the network device on the PS3 game
2300 console. This driver has built-in support for Ethernet.
2301
2302 To compile this driver as a module, choose M here: the
2303 module will be called ps3_gelic.
2304
Masakazu Mokuno09dde542008-02-07 19:58:57 +09002305config GELIC_WIRELESS
John W. Linville97ed8392008-03-06 13:08:09 -05002306 bool "PS3 Wireless support"
2307 depends on GELIC_NET
2308 select WIRELESS_EXT
2309 help
2310 This option adds the support for the wireless feature of PS3.
2311 If you have the wireless-less model of PS3 or have no plan to
2312 use wireless feature, disabling this option saves memory. As
2313 the driver automatically distinguishes the models, you can
2314 safely enable this option even if you have a wireless-less model.
Masakazu Mokuno09dde542008-02-07 19:58:57 +09002315
Masakazu Mokunof409e342008-05-30 16:52:55 +09002316config GELIC_WIRELESS_OLD_PSK_INTERFACE
2317 bool "PS3 Wireless private PSK interface (OBSOLETE)"
2318 depends on GELIC_WIRELESS
2319 help
2320 This option retains the obsolete private interface to pass
2321 the PSK from user space programs to the driver. The PSK
2322 stands for 'Pre Shared Key' and is used for WPA[2]-PSK
2323 (WPA-Personal) environment.
2324 If WPA[2]-PSK is used and you need to use old programs that
2325 support only this old interface, say Y. Otherwise N.
2326
2327 If unsure, say N.
2328
Andy Fleming1577ece2009-02-04 16:42:12 -08002329config FSL_PQ_MDIO
2330 tristate "Freescale PQ MDIO"
2331 depends on FSL_SOC
2332 select PHYLIB
2333 help
2334 This driver supports the MDIO bus used by the gianfar and UCC drivers.
2335
Linus Torvalds1da177e2005-04-16 15:20:36 -07002336config GIANFAR
2337 tristate "Gianfar Ethernet"
Kumar Gala3a831562008-01-28 10:24:30 -06002338 depends on FSL_SOC
Andy Fleming1577ece2009-02-04 16:42:12 -08002339 select FSL_PQ_MDIO
Andy Flemingbb40dcb2005-09-23 22:54:21 -04002340 select PHYLIB
Dave Jiangbf41a7c2007-04-12 10:57:06 -07002341 select CRC32
Linus Torvalds1da177e2005-04-16 15:20:36 -07002342 help
Jon Loeligeref82a302006-06-17 17:52:55 -05002343 This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
2344 and MPC86xx family of chips, and the FEC on the 8540.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002345
Li Yangce973b12006-08-14 23:00:11 -07002346config UCC_GETH
Timur Tabi7d776cb2007-03-12 15:40:27 -05002347 tristate "Freescale QE Gigabit Ethernet"
2348 depends on QUICC_ENGINE
Andy Fleming1577ece2009-02-04 16:42:12 -08002349 select FSL_PQ_MDIO
Jan Altenberg296baae2007-06-01 00:46:29 -07002350 select PHYLIB
Li Yangce973b12006-08-14 23:00:11 -07002351 help
Timur Tabi7d776cb2007-03-12 15:40:27 -05002352 This driver supports the Gigabit Ethernet mode of the QUICC Engine,
2353 which is available on some Freescale SOCs.
Li Yangce973b12006-08-14 23:00:11 -07002354
Li Yangce973b12006-08-14 23:00:11 -07002355config UGETH_MAGIC_PACKET
2356 bool "Magic Packet detection support"
2357 depends on UCC_GETH
2358
Michael Reissd5b90492007-04-13 01:26:19 -05002359config UGETH_TX_ON_DEMAND
2360 bool "Transmit on Demand support"
Li Yangce973b12006-08-14 23:00:11 -07002361 depends on UCC_GETH
2362
Linus Torvalds1da177e2005-04-16 15:20:36 -07002363config MV643XX_ETH
Lennert Buytenhek9c1bbdf2007-10-19 04:11:03 +02002364 tristate "Marvell Discovery (643XX) and Orion ethernet support"
Lennert Buytenhek83aac8a2008-03-27 14:51:40 -04002365 depends on MV64360 || MV64X60 || (PPC_MULTIPLATFORM && PPC32) || PLAT_ORION
Lennert Buytenhekab307a32009-02-24 15:41:32 +00002366 select INET_LRO
Lennert Buytenheked944932008-08-26 13:34:19 +02002367 select PHYLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -07002368 help
Lennert Buytenhek9c1bbdf2007-10-19 04:11:03 +02002369 This driver supports the gigabit ethernet MACs in the
2370 Marvell Discovery PPC/MIPS chipset family (MV643XX) and
2371 in the Marvell Orion ARM SoC family.
2372
2373 Some boards that use the Discovery chipset are the Momenco
2374 Ocelot C and Jaguar ATX and Pegasos II.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002375
Ron Mercer5a4faa82006-07-25 00:40:21 -07002376config QLA3XXX
2377 tristate "QLogic QLA3XXX Network Driver Support"
2378 depends on PCI
2379 help
2380 This driver supports QLogic ISP3XXX gigabit Ethernet cards.
2381
2382 To compile this driver as a module, choose M here: the module
2383 will be called qla3xxx.
2384
Jay Cliburnf3cc28c2007-02-08 10:42:37 -05002385config ATL1
Jay Cliburna6d1f362008-09-27 04:17:22 +00002386 tristate "Atheros/Attansic L1 Gigabit Ethernet support"
2387 depends on PCI
Jay Cliburnf3cc28c2007-02-08 10:42:37 -05002388 select CRC32
2389 select MII
2390 help
Jay Cliburna6d1f362008-09-27 04:17:22 +00002391 This driver supports the Atheros/Attansic L1 gigabit ethernet
2392 adapter.
Jay Cliburnf3cc28c2007-02-08 10:42:37 -05002393
2394 To compile this driver as a module, choose M here. The module
2395 will be called atl1.
2396
Jie Yanga6a53252008-07-18 11:37:13 +08002397config ATL1E
2398 tristate "Atheros L1E Gigabit Ethernet support (EXPERIMENTAL)"
2399 depends on PCI && EXPERIMENTAL
2400 select CRC32
2401 select MII
2402 help
2403 This driver supports the Atheros L1E gigabit ethernet adapter.
2404
2405 To compile this driver as a module, choose M here. The module
2406 will be called atl1e.
2407
Jie Yang43250dd2009-02-18 17:24:15 -08002408config ATL1C
2409 tristate "Atheros L1C Gigabit Ethernet support (EXPERIMENTAL)"
2410 depends on PCI && EXPERIMENTAL
2411 select CRC32
2412 select MII
2413 help
2414 This driver supports the Atheros L1C gigabit ethernet adapter.
2415
2416 To compile this driver as a module, choose M here. The module
2417 will be called atl1c.
2418
Guo-Fu Tseng95252232008-09-16 01:00:11 +08002419config JME
2420 tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
2421 depends on PCI
2422 select CRC32
2423 select MII
2424 ---help---
2425 This driver supports the PCI-Express gigabit ethernet adapters
2426 based on JMicron JMC250 chipset.
2427
2428 To compile this driver as a module, choose M here. The module
2429 will be called jme.
2430
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002431endif # NETDEV_1000
Linus Torvalds1da177e2005-04-16 15:20:36 -07002432
2433#
2434# 10 Gigabit Ethernet
2435#
2436
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002437menuconfig NETDEV_10000
2438 bool "Ethernet (10000 Mbit)"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07002439 depends on !UML
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002440 default y
Jan Engelhardt06bfb7e2007-08-18 12:56:21 +02002441 ---help---
2442 Say Y here to get to see options for 10 Gigabit Ethernet drivers.
2443 This option alone does not add any kernel code.
2444
2445 If you say N, all options in this submenu will be skipped and disabled.
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002446
2447if NETDEV_10000
Linus Torvalds1da177e2005-04-16 15:20:36 -07002448
Christoph Lameter8199d3a2005-03-30 13:34:31 -08002449config CHELSIO_T1
2450 tristate "Chelsio 10Gb Ethernet support"
2451 depends on PCI
Stephen Hemminger57834ca2006-12-01 16:36:19 -08002452 select CRC32
Christoph Lameter8199d3a2005-03-30 13:34:31 -08002453 help
Stephen Hemmingerf1d3d382006-12-01 16:36:16 -08002454 This driver supports Chelsio gigabit and 10-gigabit
2455 Ethernet cards. More information about adapter features and
2456 performance tuning is in <file:Documentation/networking/cxgb.txt>.
Christoph Lameter8199d3a2005-03-30 13:34:31 -08002457
2458 For general information about Chelsio and our products, visit
2459 our website at <http://www.chelsio.com>.
2460
2461 For customer support, please visit our customer support page at
2462 <http://www.chelsio.com/support.htm>.
2463
2464 Please send feedback to <linux-bugs@chelsio.com>.
2465
2466 To compile this driver as a module, choose M here: the module
2467 will be called cxgb.
2468
Stephen Hemminger352c4172006-12-01 16:36:17 -08002469config CHELSIO_T1_1G
2470 bool "Chelsio gigabit Ethernet support"
2471 depends on CHELSIO_T1
2472 help
2473 Enables support for Chelsio's gigabit Ethernet PCI cards. If you
2474 are using only 10G cards say 'N' here.
2475
James Bottomley58daa682008-12-30 10:20:24 -06002476config CHELSIO_T3_DEPENDS
2477 tristate
2478 depends on PCI && INET
2479 default y
2480
Divy Le Ray4d22de32007-01-18 22:04:14 -05002481config CHELSIO_T3
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002482 tristate "Chelsio Communications T3 10Gb Ethernet support"
James Bottomley58daa682008-12-30 10:20:24 -06002483 depends on CHELSIO_T3_DEPENDS
Divy Le Ray2e283962007-03-18 13:10:06 -07002484 select FW_LOADER
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002485 help
2486 This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
2487 adapters.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002488
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002489 For general information about Chelsio and our products, visit
2490 our website at <http://www.chelsio.com>.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002491
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002492 For customer support, please visit our customer support page at
2493 <http://www.chelsio.com/support.htm>.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002494
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002495 Please send feedback to <linux-bugs@chelsio.com>.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002496
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002497 To compile this driver as a module, choose M here: the module
2498 will be called cxgb3.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002499
Jan-Bernd Themann7a291082006-09-13 17:44:31 +02002500config EHEA
2501 tristate "eHEA Ethernet support"
Nathan Lynch60d50192008-06-04 08:31:28 +10002502 depends on IBMEBUS && INET && SPARSEMEM
Jan-Bernd Themannd4dc4ec2007-09-25 16:16:34 -07002503 select INET_LRO
Jan-Bernd Themann7a291082006-09-13 17:44:31 +02002504 ---help---
2505 This driver supports the IBM pSeries eHEA ethernet adapter.
2506
2507 To compile the driver as a module, choose M here. The module
2508 will be called ehea.
2509
Scott Feldman01f2e4e2008-09-15 09:17:11 -07002510config ENIC
Roland Dreiereb8a4cb2008-10-13 18:53:05 -07002511 tristate "Cisco 10G Ethernet NIC support"
Scott Feldman01f2e4e2008-09-15 09:17:11 -07002512 depends on PCI && INET
2513 select INET_LRO
2514 help
2515 This enables the support for the Cisco 10G Ethernet card.
2516
Auke Kok9a799d72007-09-15 14:07:45 -07002517config IXGBE
2518 tristate "Intel(R) 10GbE PCI Express adapters support"
Mallikarjuna R Chilakala177db6f2008-06-18 15:32:19 -07002519 depends on PCI && INET
Auke Kok9a799d72007-09-15 14:07:45 -07002520 ---help---
2521 This driver supports Intel(R) 10GbE PCI Express family of
2522 adapters. For more information on how to identify your adapter, go
2523 to the Adapter & Driver ID Guide at:
2524
2525 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
2526
2527 For general information and support, go to the Intel support
2528 website at:
2529
2530 <http://support.intel.com>
2531
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002532 To compile this driver as a module, choose M here. The module
Auke Kok9a799d72007-09-15 14:07:45 -07002533 will be called ixgbe.
2534
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002535config IXGBE_DCA
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002536 bool "Direct Cache Access (DCA) Support"
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002537 default y
2538 depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002539 ---help---
2540 Say Y here if you want to use Direct Cache Access (DCA) in the
2541 driver. DCA is a method for warming the CPU cache before data
2542 is used, with the intent of lessening the impact of cache misses.
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002543
Jeff Kirsher7a6b6f52008-11-25 01:02:08 -08002544config IXGBE_DCB
Alexander Duyck2f90b862008-11-20 20:52:10 -08002545 bool "Data Center Bridging (DCB) Support"
2546 default n
Jeff Kirsher7a6b6f52008-11-25 01:02:08 -08002547 depends on IXGBE && DCB
Alexander Duyck2f90b862008-11-20 20:52:10 -08002548 ---help---
2549 Say Y here if you want to use Data Center Bridging (DCB) in the
2550 driver.
2551
2552 If unsure, say N.
2553
Linus Torvalds1da177e2005-04-16 15:20:36 -07002554config IXGB
2555 tristate "Intel(R) PRO/10GbE support"
2556 depends on PCI
2557 ---help---
Auke Kok9a799d72007-09-15 14:07:45 -07002558 This driver supports Intel(R) PRO/10GbE family of adapters for
2559 PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
2560 instead. For more information on how to identify your adapter, go
Linus Torvalds1da177e2005-04-16 15:20:36 -07002561 to the Adapter & Driver ID Guide at:
2562
2563 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
2564
2565 For general information and support, go to the Intel support
2566 website at:
2567
2568 <http://support.intel.com>
2569
2570 More specific information on configuring the driver is in
2571 <file:Documentation/networking/ixgb.txt>.
2572
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002573 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07002574 will be called ixgb.
2575
Linus Torvalds1da177e2005-04-16 15:20:36 -07002576config S2IO
2577 tristate "S2IO 10Gbe XFrame NIC"
2578 depends on PCI
2579 ---help---
2580 This driver supports the 10Gbe XFrame NIC of S2IO.
Akinobu Mita9eb343a2005-10-21 19:06:42 +09002581 More specific information on configuring the driver is in
2582 <file:Documentation/networking/s2io.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002583
Ramkrishna Vepaf1782852009-04-01 18:15:24 +00002584config VXGE
2585 tristate "Neterion X3100 Series 10GbE PCIe Server Adapter"
2586 depends on PCI && INET
2587 ---help---
2588 This driver supports Neterion Inc's X3100 Series 10 GbE PCIe
2589 I/O Virtualized Server Adapter.
2590 More specific information on configuring the driver is in
2591 <file:Documentation/networking/vxge.txt>.
2592
2593config VXGE_DEBUG_TRACE_ALL
2594 bool "Enabling All Debug trace statments in driver"
2595 default n
2596 depends on VXGE
2597 ---help---
2598 Say Y here if you want to enabling all the debug trace statements in
2599 driver. By default only few debug trace statements are enabled.
2600
Brice Goglin0da34b62006-05-23 06:10:15 -04002601config MYRI10GE
2602 tristate "Myricom Myri-10G Ethernet support"
Randy Dunlape0d5dab2007-10-18 21:53:50 -07002603 depends on PCI && INET
Brice Goglin0da34b62006-05-23 06:10:15 -04002604 select FW_LOADER
2605 select CRC32
Andrew Gallatin1e6e9342007-09-17 11:37:42 -07002606 select INET_LRO
Brice Goglin0da34b62006-05-23 06:10:15 -04002607 ---help---
2608 This driver supports Myricom Myri-10G Dual Protocol interface in
2609 Ethernet mode. If the eeprom on your board is not recent enough,
2610 you will need a newer firmware image.
2611 You may get this image or more information, at:
2612
Brice Goglind2794902006-09-05 21:58:50 -04002613 <http://www.myri.com/scs/download-Myri10GE.html>
Brice Goglin0da34b62006-05-23 06:10:15 -04002614
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002615 To compile this driver as a module, choose M here. The module
Brice Goglin0da34b62006-05-23 06:10:15 -04002616 will be called myri10ge.
2617
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002618config MYRI10GE_DCA
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002619 bool "Direct Cache Access (DCA) Support"
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002620 default y
2621 depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m)
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002622 ---help---
2623 Say Y here if you want to use Direct Cache Access (DCA) in the
2624 driver. DCA is a method for warming the CPU cache before data
2625 is used, with the intent of lessening the impact of cache misses.
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002626
Amit S. Kale3d396eb2006-10-21 15:33:03 -04002627config NETXEN_NIC
2628 tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
Randy Dunlap5ac36612006-11-16 21:39:11 -08002629 depends on PCI
Amit S. Kale3d396eb2006-10-21 15:33:03 -04002630 help
2631 This enables the support for NetXen's Gigabit Ethernet card.
2632
David S. Millera3138df2007-10-09 01:54:01 -07002633config NIU
2634 tristate "Sun Neptune 10Gbit Ethernet support"
2635 depends on PCI
2636 help
2637 This enables support for cards based upon Sun's
2638 Neptune chipset.
2639
Olof Johanssonf5cd7872007-01-31 21:43:54 -06002640config PASEMI_MAC
2641 tristate "PA Semi 1/10Gbit MAC"
Michael Ellerman5beaf7d2008-03-28 12:17:33 +11002642 depends on PPC_PASEMI && PCI
Olof Johanssonbb6e9592007-05-08 00:47:54 -05002643 select PHYLIB
Olof Johansson28ae79f2007-11-28 20:57:27 -06002644 select INET_LRO
Olof Johanssonf5cd7872007-01-31 21:43:54 -06002645 help
2646 This driver supports the on-chip 1/10Gbit Ethernet controller on
2647 PA Semi's PWRficient line of chips.
2648
Yevgeny Petrilinc27a02c2008-10-22 15:47:49 -07002649config MLX4_EN
2650 tristate "Mellanox Technologies 10Gbit Ethernet support"
2651 depends on PCI && INET
2652 select MLX4_CORE
2653 select INET_LRO
2654 help
2655 This driver supports Mellanox Technologies ConnectX Ethernet
2656 devices.
2657
Roland Dreier225c7b12007-05-08 18:00:38 -07002658config MLX4_CORE
2659 tristate
2660 depends on PCI
2661 default n
2662
2663config MLX4_DEBUG
2664 bool "Verbose debugging output" if (MLX4_CORE && EMBEDDED)
Paul Mundtf550d942007-05-10 12:50:28 +09002665 depends on MLX4_CORE
Roland Dreier225c7b12007-05-08 18:00:38 -07002666 default y
2667 ---help---
2668 This option causes debugging code to be compiled into the
2669 mlx4_core driver. The output can be turned on via the
2670 debug_level module parameter (which can also be set after
2671 the driver is loaded through sysfs).
2672
Andy Gospodarek1a348cc2007-09-17 18:50:36 -07002673config TEHUTI
2674 tristate "Tehuti Networks 10G Ethernet"
2675 depends on PCI
2676 help
2677 Tehuti Networks 10G Ethernet NIC
2678
Eliezer Tamira2fbb9e2007-11-15 20:09:02 +02002679config BNX2X
2680 tristate "Broadcom NetXtremeII 10Gb support"
2681 depends on PCI
Lee Schermerhorn07b270e2007-12-13 16:02:59 -08002682 select ZLIB_INFLATE
Eilon Greenstein34f80b02008-06-23 20:33:01 -07002683 select LIBCRC32C
Eliezer Tamira2fbb9e2007-11-15 20:09:02 +02002684 help
2685 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
2686 To compile this driver as a module, choose M here: the module
2687 will be called bnx2x. This is recommended.
2688
Ron Mercerc4e84bd2008-09-18 11:56:28 -04002689config QLGE
2690 tristate "QLogic QLGE 10Gb Ethernet Driver Support"
2691 depends on PCI
2692 help
2693 This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
2694
2695 To compile this driver as a module, choose M here: the module
2696 will be called qlge.
2697
Ben Hutchings8ceee662008-04-27 12:55:59 +01002698source "drivers/net/sfc/Kconfig"
Eliezer Tamira2fbb9e2007-11-15 20:09:02 +02002699
Sathya Perla6b7c5b92009-03-11 23:32:03 -07002700source "drivers/net/benet/Kconfig"
2701
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002702endif # NETDEV_10000
Linus Torvalds1da177e2005-04-16 15:20:36 -07002703
Linus Torvalds1da177e2005-04-16 15:20:36 -07002704source "drivers/net/tokenring/Kconfig"
2705
2706source "drivers/net/wireless/Kconfig"
2707
Inaky Perez-Gonzalez143ee2d2008-12-23 16:18:48 -08002708source "drivers/net/wimax/Kconfig"
2709
Jeff Garzik5b2fc492007-05-09 21:31:55 -04002710source "drivers/net/usb/Kconfig"
2711
Linus Torvalds1da177e2005-04-16 15:20:36 -07002712source "drivers/net/pcmcia/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -07002713
2714source "drivers/net/wan/Kconfig"
2715
2716source "drivers/atm/Kconfig"
2717
2718source "drivers/s390/net/Kconfig"
2719
Jeremy Fitzhardinge0d160212007-07-17 18:37:06 -07002720config XEN_NETDEV_FRONTEND
2721 tristate "Xen network device frontend driver"
2722 depends on XEN
2723 default y
2724 help
2725 The network device frontend driver allows the kernel to
2726 access network devices exported exported by a virtual
2727 machine containing a physical network device driver. The
2728 frontend driver is intended for unprivileged guest domains;
2729 if you are compiling a kernel for a Xen guest, you almost
2730 certainly want to enable this.
2731
Linus Torvalds1da177e2005-04-16 15:20:36 -07002732config ISERIES_VETH
2733 tristate "iSeries Virtual Ethernet driver support"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07002734 depends on PPC_ISERIES
Linus Torvalds1da177e2005-04-16 15:20:36 -07002735
Matt Porterf89efd52005-09-09 12:10:10 -07002736config RIONET
2737 tristate "RapidIO Ethernet over messaging driver support"
Randy Dunlapa81c52a2006-11-01 21:18:58 -08002738 depends on RAPIDIO
Matt Porterf89efd52005-09-09 12:10:10 -07002739
2740config RIONET_TX_SIZE
2741 int "Number of outbound queue entries"
2742 depends on RIONET
2743 default "128"
2744
2745config RIONET_RX_SIZE
2746 int "Number of inbound queue entries"
2747 depends on RIONET
2748 default "128"
2749
Linus Torvalds1da177e2005-04-16 15:20:36 -07002750config FDDI
Dave Joneseb560922008-12-27 20:43:48 -08002751 tristate "FDDI driver support"
Maciej W. Rozyckie89a2cf2007-02-05 16:28:27 -08002752 depends on (PCI || EISA || TC)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002753 help
2754 Fiber Distributed Data Interface is a high speed local area network
2755 design; essentially a replacement for high speed Ethernet. FDDI can
2756 run over copper or fiber. If you are connected to such a network and
2757 want a driver for the FDDI card in your computer, say Y here (and
2758 then also Y to the driver for your FDDI card, below). Most people
2759 will say N.
2760
2761config DEFXX
Maciej W. Rozyckie89a2cf2007-02-05 16:28:27 -08002762 tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
2763 depends on FDDI && (PCI || EISA || TC)
2764 ---help---
2765 This is support for the DIGITAL series of TURBOchannel (DEFTA),
2766 EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
2767 to a local FDDI network.
2768
2769 To compile this driver as a module, choose M here: the module
2770 will be called defxx. If unsure, say N.
2771
2772config DEFXX_MMIO
2773 bool
2774 prompt "Use MMIO instead of PIO" if PCI || EISA
2775 depends on DEFXX
2776 default n if PCI || EISA
2777 default y
2778 ---help---
2779 This instructs the driver to use EISA or PCI memory-mapped I/O
2780 (MMIO) as appropriate instead of programmed I/O ports (PIO).
2781 Enabling this gives an improvement in processing time in parts
2782 of the driver, but it may cause problems with EISA (DEFEA)
2783 adapters. TURBOchannel does not have the concept of I/O ports,
2784 so MMIO is always used for these (DEFTA) adapters.
2785
2786 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002787
2788config SKFP
2789 tristate "SysKonnect FDDI PCI support"
2790 depends on FDDI && PCI
Akinobu Mitabc63eb92006-12-19 13:09:08 -08002791 select BITREVERSE
Linus Torvalds1da177e2005-04-16 15:20:36 -07002792 ---help---
2793 Say Y here if you have a SysKonnect FDDI PCI adapter.
2794 The following adapters are supported by this driver:
2795 - SK-5521 (SK-NET FDDI-UP)
2796 - SK-5522 (SK-NET FDDI-UP DAS)
2797 - SK-5541 (SK-NET FDDI-FP)
2798 - SK-5543 (SK-NET FDDI-LP)
2799 - SK-5544 (SK-NET FDDI-LP DAS)
2800 - SK-5821 (SK-NET FDDI-UP64)
2801 - SK-5822 (SK-NET FDDI-UP64 DAS)
2802 - SK-5841 (SK-NET FDDI-FP64)
2803 - SK-5843 (SK-NET FDDI-LP64)
2804 - SK-5844 (SK-NET FDDI-LP64 DAS)
2805 - Netelligent 100 FDDI DAS Fibre SC
2806 - Netelligent 100 FDDI SAS Fibre SC
2807 - Netelligent 100 FDDI DAS UTP
2808 - Netelligent 100 FDDI SAS UTP
2809 - Netelligent 100 FDDI SAS Fibre MIC
2810
2811 Read <file:Documentation/networking/skfp.txt> for information about
2812 the driver.
2813
2814 Questions concerning this driver can be addressed to:
2815 <linux@syskonnect.de>
2816
2817 To compile this driver as a module, choose M here: the module
2818 will be called skfp. This is recommended.
2819
2820config HIPPI
2821 bool "HIPPI driver support (EXPERIMENTAL)"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07002822 depends on EXPERIMENTAL && INET && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07002823 help
2824 HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
2825 1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
2826 can run over copper (25m) or fiber (300m on multi-mode or 10km on
2827 single-mode). HIPPI networks are commonly used for clusters and to
2828 connect to super computers. If you are connected to a HIPPI network
2829 and have a HIPPI network card in your computer that you want to use
2830 under Linux, say Y here (you must also remember to enable the driver
2831 for your HIPPI card below). Most people will say N here.
2832
2833config ROADRUNNER
2834 tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)"
2835 depends on HIPPI && PCI
2836 help
2837 Say Y here if this is your PCI HIPPI network card.
2838
2839 To compile this driver as a module, choose M here: the module
2840 will be called rrunner. If unsure, say N.
2841
2842config ROADRUNNER_LARGE_RINGS
2843 bool "Use large TX/RX rings (EXPERIMENTAL)"
2844 depends on ROADRUNNER
2845 help
2846 If you say Y here, the RoadRunner driver will preallocate up to 2 MB
2847 of additional memory to allow for fastest operation, both for
2848 transmitting and receiving. This memory cannot be used by any other
2849 kernel code or by user space programs. Say Y here only if you have
2850 the memory.
2851
2852config PLIP
2853 tristate "PLIP (parallel port) support"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07002854 depends on PARPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -07002855 ---help---
2856 PLIP (Parallel Line Internet Protocol) is used to create a
2857 reasonably fast mini network consisting of two (or, rarely, more)
2858 local machines. A PLIP link from a Linux box is a popular means to
2859 install a Linux distribution on a machine which doesn't have a
2860 CD-ROM drive (a minimal system has to be transferred with floppies
2861 first). The kernels on both machines need to have this PLIP option
2862 enabled for this to work.
2863
2864 The PLIP driver has two modes, mode 0 and mode 1. The parallel
2865 ports (the connectors at the computers with 25 holes) are connected
2866 with "null printer" or "Turbo Laplink" cables which can transmit 4
2867 bits at a time (mode 0) or with special PLIP cables, to be used on
2868 bidirectional parallel ports only, which can transmit 8 bits at a
2869 time (mode 1); you can find the wiring of these cables in
2870 <file:Documentation/networking/PLIP.txt>. The cables can be up to
2871 15m long. Mode 0 works also if one of the machines runs DOS/Windows
2872 and has some PLIP software installed, e.g. the Crynwr PLIP packet
2873 driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
2874 and winsock or NCSA's telnet.
2875
2876 If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
2877 as the NET-3-HOWTO, both available from
2878 <http://www.tldp.org/docs.html#howto>. Note that the PLIP
2879 protocol has been changed and this PLIP driver won't work together
2880 with the PLIP support in Linux versions 1.0.x. This option enlarges
2881 your kernel by about 8 KB.
2882
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002883 To compile this driver as a module, choose M here. The module
2884 will be called plip. If unsure, say Y or M, in case you buy
2885 a laptop later.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002886
2887config PPP
2888 tristate "PPP (point-to-point protocol) support"
Ralf Baechleb6e37e52006-07-14 12:15:40 +01002889 select SLHC
Linus Torvalds1da177e2005-04-16 15:20:36 -07002890 ---help---
2891 PPP (Point to Point Protocol) is a newer and better SLIP. It serves
2892 the same purpose: sending Internet traffic over telephone (and other
2893 serial) lines. Ask your access provider if they support it, because
2894 otherwise you can't use it; most Internet access providers these
2895 days support PPP rather than SLIP.
2896
2897 To use PPP, you need an additional program called pppd as described
2898 in the PPP-HOWTO, available at
2899 <http://www.tldp.org/docs.html#howto>. Make sure that you have
2900 the version of pppd recommended in <file:Documentation/Changes>.
2901 The PPP option enlarges your kernel by about 16 KB.
2902
2903 There are actually two versions of PPP: the traditional PPP for
2904 asynchronous lines, such as regular analog phone lines, and
2905 synchronous PPP which can be used over digital ISDN lines for
2906 example. If you want to use PPP over phone lines or other
2907 asynchronous serial lines, you need to say Y (or M) here and also to
2908 the next option, "PPP support for async serial ports". For PPP over
2909 synchronous lines, you should say Y (or M) here and to "Support
2910 synchronous PPP", below.
2911
2912 If you said Y to "Version information on all symbols" above, then
2913 you cannot compile the PPP driver into the kernel; you can then only
2914 compile it as a module. To compile this driver as a module, choose M
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002915 here. The module will be called ppp_generic.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002916
2917config PPP_MULTILINK
2918 bool "PPP multilink support (EXPERIMENTAL)"
2919 depends on PPP && EXPERIMENTAL
2920 help
2921 PPP multilink is a protocol (defined in RFC 1990) which allows you
2922 to combine several (logical or physical) lines into one logical PPP
2923 connection, so that you can utilize your full bandwidth.
2924
2925 This has to be supported at the other end as well and you need a
2926 version of the pppd daemon which understands the multilink protocol.
2927
2928 If unsure, say N.
2929
2930config PPP_FILTER
2931 bool "PPP filtering"
2932 depends on PPP
2933 help
2934 Say Y here if you want to be able to filter the packets passing over
2935 PPP interfaces. This allows you to control which packets count as
2936 activity (i.e. which packets will reset the idle timer or bring up
Jon Mason47c51432006-02-12 11:53:04 -06002937 a demand-dialed link) and which packets are to be dropped entirely.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002938 You need to say Y here if you wish to use the pass-filter and
2939 active-filter options to pppd.
2940
2941 If unsure, say N.
2942
2943config PPP_ASYNC
2944 tristate "PPP support for async serial ports"
2945 depends on PPP
2946 select CRC_CCITT
2947 ---help---
2948 Say Y (or M) here if you want to be able to use PPP over standard
2949 asynchronous serial ports, such as COM1 or COM2 on a PC. If you use
2950 a modem (not a synchronous or ISDN modem) to contact your ISP, you
2951 need this option.
2952
2953 To compile this driver as a module, choose M here.
2954
2955 If unsure, say Y.
2956
2957config PPP_SYNC_TTY
2958 tristate "PPP support for sync tty ports"
2959 depends on PPP
2960 help
2961 Say Y (or M) here if you want to be able to use PPP over synchronous
2962 (HDLC) tty devices, such as the SyncLink adapter. These devices
2963 are often used for high-speed leased lines like T1/E1.
2964
2965 To compile this driver as a module, choose M here.
2966
2967config PPP_DEFLATE
2968 tristate "PPP Deflate compression"
2969 depends on PPP
2970 select ZLIB_INFLATE
2971 select ZLIB_DEFLATE
2972 ---help---
2973 Support for the Deflate compression method for PPP, which uses the
2974 Deflate algorithm (the same algorithm that gzip uses) to compress
2975 each PPP packet before it is sent over the wire. The machine at the
2976 other end of the PPP link (usually your ISP) has to support the
2977 Deflate compression method as well for this to be useful. Even if
2978 they don't support it, it is safe to say Y here.
2979
2980 To compile this driver as a module, choose M here.
2981
2982config PPP_BSDCOMP
2983 tristate "PPP BSD-Compress compression"
2984 depends on PPP
2985 ---help---
2986 Support for the BSD-Compress compression method for PPP, which uses
2987 the LZW compression method to compress each PPP packet before it is
2988 sent over the wire. The machine at the other end of the PPP link
2989 (usually your ISP) has to support the BSD-Compress compression
2990 method as well for this to be useful. Even if they don't support it,
2991 it is safe to say Y here.
2992
2993 The PPP Deflate compression method ("PPP Deflate compression",
2994 above) is preferable to BSD-Compress, because it compresses better
2995 and is patent-free.
2996
2997 Note that the BSD compression code will always be compiled as a
2998 module; it is called bsd_comp and will show up in the directory
2999 modules once you have said "make modules". If unsure, say N.
3000
Matt Domschb3f9b922005-11-08 09:40:47 -08003001config PPP_MPPE
3002 tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
3003 depends on PPP && EXPERIMENTAL
3004 select CRYPTO
3005 select CRYPTO_SHA1
3006 select CRYPTO_ARC4
Patrick McHardybcbaecb2006-10-25 16:49:36 +10003007 select CRYPTO_ECB
Matt Domschb3f9b922005-11-08 09:40:47 -08003008 ---help---
3009 Support for the MPPE Encryption protocol, as employed by the
3010 Microsoft Point-to-Point Tunneling Protocol.
3011
3012 See http://pptpclient.sourceforge.net/ for information on
3013 configuring PPTP clients and servers to utilize this method.
3014
Linus Torvalds1da177e2005-04-16 15:20:36 -07003015config PPPOE
3016 tristate "PPP over Ethernet (EXPERIMENTAL)"
3017 depends on EXPERIMENTAL && PPP
3018 help
3019 Support for PPP over Ethernet.
3020
3021 This driver requires the latest version of pppd from the CVS
3022 repository at cvs.samba.org. Alternatively, see the
3023 RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
3024 which contains instruction on how to use this driver (under
3025 the heading "Kernel mode PPPoE").
3026
3027config PPPOATM
3028 tristate "PPP over ATM"
3029 depends on ATM && PPP
3030 help
3031 Support PPP (Point to Point Protocol) encapsulated in ATM frames.
3032 This implementation does not yet comply with section 8 of RFC2364,
3033 which can lead to bad results if the ATM peer loses state and
3034 changes its encapsulation unilaterally.
3035
James Chapman3557baa2007-06-27 15:49:24 -07003036config PPPOL2TP
3037 tristate "PPP over L2TP (EXPERIMENTAL)"
James Chapman143cf352007-07-30 18:51:48 -07003038 depends on EXPERIMENTAL && PPP && INET
James Chapman3557baa2007-06-27 15:49:24 -07003039 help
3040 Support for PPP-over-L2TP socket family. L2TP is a protocol
3041 used by ISPs and enterprises to tunnel PPP traffic over UDP
3042 tunnels. L2TP is replacing PPTP for VPN uses.
3043
3044 This kernel component handles only L2TP data packets: a
3045 userland daemon handles L2TP the control protocol (tunnel
3046 and session setup). One such daemon is OpenL2TP
3047 (http://openl2tp.sourceforge.net/).
3048
Linus Torvalds1da177e2005-04-16 15:20:36 -07003049config SLIP
3050 tristate "SLIP (serial line) support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07003051 ---help---
3052 Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
3053 connect to your Internet service provider or to connect to some
3054 other local Unix box or if you want to configure your Linux box as a
3055 Slip/CSlip server for other people to dial in. SLIP (Serial Line
3056 Internet Protocol) is a protocol used to send Internet traffic over
3057 serial connections such as telephone lines or null modem cables;
3058 nowadays, the protocol PPP is more commonly used for this same
3059 purpose.
3060
3061 Normally, your access provider has to support SLIP in order for you
3062 to be able to use it, but there is now a SLIP emulator called SLiRP
3063 around (available from
3064 <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
3065 allows you to use SLIP over a regular dial up shell connection. If
3066 you plan to use SLiRP, make sure to say Y to CSLIP, below. The
3067 NET-3-HOWTO, available from
3068 <http://www.tldp.org/docs.html#howto>, explains how to
3069 configure SLIP. Note that you don't need this option if you just
3070 want to run term (term is a program which gives you almost full
3071 Internet connectivity if you have a regular dial up shell account on
3072 some Internet connected Unix computer. Read
3073 <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
3074 support will enlarge your kernel by about 4 KB. If unsure, say N.
3075
Adrian Bunk57ce45d2007-11-12 21:03:58 -08003076 To compile this driver as a module, choose M here. The module
3077 will be called slip.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003078
3079config SLIP_COMPRESSED
3080 bool "CSLIP compressed headers"
3081 depends on SLIP
Ralf Baechleb6e37e52006-07-14 12:15:40 +01003082 select SLHC
Linus Torvalds1da177e2005-04-16 15:20:36 -07003083 ---help---
3084 This protocol is faster than SLIP because it uses compression on the
3085 TCP/IP headers (not on the data itself), but it has to be supported
3086 on both ends. Ask your access provider if you are not sure and
3087 answer Y, just in case. You will still be able to use plain SLIP. If
3088 you plan to use SLiRP, the SLIP emulator (available from
3089 <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
3090 allows you to use SLIP over a regular dial up shell connection, you
3091 definitely want to say Y here. The NET-3-HOWTO, available from
3092 <http://www.tldp.org/docs.html#howto>, explains how to configure
3093 CSLIP. This won't enlarge your kernel.
3094
Ralf Baechleb6e37e52006-07-14 12:15:40 +01003095config SLHC
3096 tristate
3097 help
3098 This option enables Van Jacobsen serial line header compression
3099 routines.
3100
Linus Torvalds1da177e2005-04-16 15:20:36 -07003101config SLIP_SMART
3102 bool "Keepalive and linefill"
3103 depends on SLIP
3104 help
3105 Adds additional capabilities to the SLIP driver to support the
3106 RELCOM line fill and keepalive monitoring. Ideal on poor quality
3107 analogue lines.
3108
3109config SLIP_MODE_SLIP6
3110 bool "Six bit SLIP encapsulation"
3111 depends on SLIP
3112 help
3113 Just occasionally you may need to run IP over hostile serial
3114 networks that don't pass all control characters or are only seven
3115 bit. Saying Y here adds an extra mode you can use with SLIP:
3116 "slip6". In this mode, SLIP will only send normal ASCII symbols over
3117 the serial device. Naturally, this has to be supported at the other
3118 end of the link as well. It's good enough, for example, to run IP
3119 over the async ports of a Camtec JNT Pad. If unsure, say N.
3120
3121config NET_FC
3122 bool "Fibre Channel driver support"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07003123 depends on SCSI && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07003124 help
3125 Fibre Channel is a high speed serial protocol mainly used to connect
3126 large storage devices to the computer; it is compatible with and
3127 intended to replace SCSI.
3128
3129 If you intend to use Fibre Channel, you need to have a Fibre channel
3130 adaptor card in your computer; say Y here and to the driver for your
3131 adaptor below. You also should have said Y to "SCSI support" and
3132 "SCSI generic support".
3133
Linus Torvalds1da177e2005-04-16 15:20:36 -07003134config NETCONSOLE
3135 tristate "Network console logging support (EXPERIMENTAL)"
Matt Mackall5e43db72005-07-27 15:24:42 -07003136 depends on EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07003137 ---help---
3138 If you want to log kernel messages over the network, enable this.
3139 See <file:Documentation/networking/netconsole.txt> for details.
3140
Satyam Sharma0bcc1812007-08-10 15:35:05 -07003141config NETCONSOLE_DYNAMIC
3142 bool "Dynamic reconfiguration of logging targets (EXPERIMENTAL)"
3143 depends on NETCONSOLE && SYSFS && EXPERIMENTAL
3144 select CONFIGFS_FS
3145 help
3146 This option enables the ability to dynamically reconfigure target
3147 parameters (interface, IP addresses, port numbers, MAC addresses)
3148 at runtime through a userspace interface exported using configfs.
3149 See <file:Documentation/networking/netconsole.txt> for details.
3150
Randy Dunlap54208992005-07-18 13:45:12 -07003151config NETPOLL
3152 def_bool NETCONSOLE
3153
Randy Dunlap54208992005-07-18 13:45:12 -07003154config NETPOLL_TRAP
3155 bool "Netpoll traffic trapping"
3156 default n
3157 depends on NETPOLL
3158
3159config NET_POLL_CONTROLLER
3160 def_bool NETPOLL
3161
Rusty Russell296f96f2007-10-22 11:03:37 +10003162config VIRTIO_NET
3163 tristate "Virtio network driver (EXPERIMENTAL)"
3164 depends on EXPERIMENTAL && VIRTIO
3165 ---help---
Anthony Liguori0ad07ec2007-11-07 20:46:31 -06003166 This is the virtual network driver for virtio. It can be used with
3167 lguest or QEMU based VMMs (like KVM or Xen). Say Y or M.
Rusty Russell296f96f2007-10-22 11:03:37 +10003168
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07003169endif # NETDEVICES