blob: 7b3be9ac0dda3f67032f95ac5c4f8493bf6f1895 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#ifndef __ASM_PARISC_PCI_H
2#define __ASM_PARISC_PCI_H
3
Linus Torvalds1da177e2005-04-16 15:20:36 -07004#include <asm/scatterlist.h>
5
6
7
8/*
9** HP PCI platforms generally support multiple bus adapters.
10** (workstations 1-~4, servers 2-~32)
11**
12** Newer platforms number the busses across PCI bus adapters *sparsely*.
13** E.g. 0, 8, 16, ...
14**
15** Under a PCI bus, most HP platforms support PPBs up to two or three
16** levels deep. See "Bit3" product line.
17*/
18#define PCI_MAX_BUSSES 256
19
Helge Dellercb6fc182006-01-17 12:40:40 -070020
21/* To be used as: mdelay(pci_post_reset_delay);
22 *
23 * post_reset is the time the kernel should stall to prevent anyone from
24 * accessing the PCI bus once #RESET is de-asserted.
25 * PCI spec somewhere says 1 second but with multi-PCI bus systems,
26 * this makes the boot time much longer than necessary.
27 * 20ms seems to work for all the HP PCI implementations to date.
28 */
29#define pci_post_reset_delay 50
30
31
Linus Torvalds1da177e2005-04-16 15:20:36 -070032/*
33** pci_hba_data (aka H2P_OBJECT in HP/UX)
34**
35** This is the "common" or "base" data structure which HBA drivers
36** (eg Dino or LBA) are required to place at the top of their own
37** platform_data structure. I've heard this called "C inheritance" too.
38**
39** Data needed by pcibios layer belongs here.
40*/
41struct pci_hba_data {
42 void __iomem *base_addr; /* aka Host Physical Address */
43 const struct parisc_device *dev; /* device from PA bus walk */
44 struct pci_bus *hba_bus; /* primary PCI bus below HBA */
45 int hba_num; /* I/O port space access "key" */
46 struct resource bus_num; /* PCI bus numbers */
47 struct resource io_space; /* PIOP */
48 struct resource lmmio_space; /* bus addresses < 4Gb */
49 struct resource elmmio_space; /* additional bus addresses < 4Gb */
50 struct resource gmmio_space; /* bus addresses > 4Gb */
51
52 /* NOTE: Dino code assumes it can use *all* of the lmmio_space,
53 * elmmio_space and gmmio_space as a contiguous array of
54 * resources. This #define represents the array size */
55 #define DINO_MAX_LMMIO_RESOURCES 3
56
57 unsigned long lmmio_space_offset; /* CPU view - PCI view */
58 void * iommu; /* IOMMU this device is under */
59 /* REVISIT - spinlock to protect resources? */
60
61 #define HBA_NAME_SIZE 16
62 char io_name[HBA_NAME_SIZE];
63 char lmmio_name[HBA_NAME_SIZE];
64 char elmmio_name[HBA_NAME_SIZE];
65 char gmmio_name[HBA_NAME_SIZE];
66};
67
68#define HBA_DATA(d) ((struct pci_hba_data *) (d))
69
70/*
71** We support 2^16 I/O ports per HBA. These are set up in the form
72** 0xbbxxxx, where bb is the bus number and xxxx is the I/O port
73** space address.
74*/
75#define HBA_PORT_SPACE_BITS 16
76
77#define HBA_PORT_BASE(h) ((h) << HBA_PORT_SPACE_BITS)
78#define HBA_PORT_SPACE_SIZE (1UL << HBA_PORT_SPACE_BITS)
79
80#define PCI_PORT_HBA(a) ((a) >> HBA_PORT_SPACE_BITS)
81#define PCI_PORT_ADDR(a) ((a) & (HBA_PORT_SPACE_SIZE - 1))
82
Matthew Wilcox74d13f82005-10-21 22:49:05 -040083#ifdef CONFIG_64BIT
Linus Torvalds1da177e2005-04-16 15:20:36 -070084#define PCI_F_EXTEND 0xffffffff00000000UL
85#define PCI_IS_LMMIO(hba,a) pci_is_lmmio(hba,a)
86
87/* We need to know if an address is LMMMIO or GMMIO.
88 * LMMIO requires mangling and GMMIO we must use as-is.
89 */
90static __inline__ int pci_is_lmmio(struct pci_hba_data *hba, unsigned long a)
91{
92 return(((a) & PCI_F_EXTEND) == PCI_F_EXTEND);
93}
94
95/*
96** Convert between PCI (IO_VIEW) addresses and processor (PA_VIEW) addresses.
Helge Dellercb6fc182006-01-17 12:40:40 -070097** See pci.c for more conversions used by Generic PCI code.
Grant Grundler9b9ff2e2006-01-10 20:48:00 -050098**
99** Platform characteristics/firmware guarantee that
100** (1) PA_VIEW - IO_VIEW = lmmio_offset for both LMMIO and ELMMIO
101** (2) PA_VIEW == IO_VIEW for GMMIO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700102*/
103#define PCI_BUS_ADDR(hba,a) (PCI_IS_LMMIO(hba,a) \
104 ? ((a) - hba->lmmio_space_offset) /* mangle LMMIO */ \
105 : (a)) /* GMMIO */
Grant Grundler9b9ff2e2006-01-10 20:48:00 -0500106#define PCI_HOST_ADDR(hba,a) (((a) & PCI_F_EXTEND) == 0 \
107 ? (a) + hba->lmmio_space_offset \
108 : (a))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700109
110#else /* !CONFIG_64BIT */
111
112#define PCI_BUS_ADDR(hba,a) (a)
113#define PCI_HOST_ADDR(hba,a) (a)
114#define PCI_F_EXTEND 0UL
115#define PCI_IS_LMMIO(hba,a) (1) /* 32-bit doesn't support GMMIO */
116
117#endif /* !CONFIG_64BIT */
118
119/*
120** KLUGE: linux/pci.h include asm/pci.h BEFORE declaring struct pci_bus
121** (This eliminates some of the warnings).
122*/
123struct pci_bus;
124struct pci_dev;
125
126/*
127 * If the PCI device's view of memory is the same as the CPU's view of memory,
128 * PCI_DMA_BUS_IS_PHYS is true. The networking and block device layers use
129 * this boolean for bounce buffer decisions.
130 */
131#ifdef CONFIG_PA20
132/* All PA-2.0 machines have an IOMMU. */
133#define PCI_DMA_BUS_IS_PHYS 0
134#define parisc_has_iommu() do { } while (0)
135#else
136
137#if defined(CONFIG_IOMMU_CCIO) || defined(CONFIG_IOMMU_SBA)
138extern int parisc_bus_is_phys; /* in arch/parisc/kernel/setup.c */
139#define PCI_DMA_BUS_IS_PHYS parisc_bus_is_phys
140#define parisc_has_iommu() do { parisc_bus_is_phys = 0; } while (0)
141#else
142#define PCI_DMA_BUS_IS_PHYS 1
143#define parisc_has_iommu() do { } while (0)
144#endif
145
146#endif /* !CONFIG_PA20 */
147
148
149/*
150** Most PCI devices (eg Tulip, NCR720) also export the same registers
151** to both MMIO and I/O port space. Due to poor performance of I/O Port
Matt LaPlante0779bf22006-11-30 05:24:39 +0100152** access under HP PCI bus adapters, strongly recommend the use of MMIO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700153** address space.
154**
155** While I'm at it more PA programming notes:
156**
157** 1) MMIO stores (writes) are posted operations. This means the processor
158** gets an "ACK" before the write actually gets to the device. A read
159** to the same device (or typically the bus adapter above it) will
160** force in-flight write transaction(s) out to the targeted device
161** before the read can complete.
162**
163** 2) The Programmed I/O (PIO) data may not always be strongly ordered with
164** respect to DMA on all platforms. Ie PIO data can reach the processor
165** before in-flight DMA reaches memory. Since most SMP PA platforms
166** are I/O coherent, it generally doesn't matter...but sometimes
167** it does.
168**
169** I've helped device driver writers debug both types of problems.
170*/
171struct pci_port_ops {
172 u8 (*inb) (struct pci_hba_data *hba, u16 port);
173 u16 (*inw) (struct pci_hba_data *hba, u16 port);
174 u32 (*inl) (struct pci_hba_data *hba, u16 port);
175 void (*outb) (struct pci_hba_data *hba, u16 port, u8 data);
176 void (*outw) (struct pci_hba_data *hba, u16 port, u16 data);
177 void (*outl) (struct pci_hba_data *hba, u16 port, u32 data);
178};
179
180
181struct pci_bios_ops {
182 void (*init)(void);
183 void (*fixup_bus)(struct pci_bus *bus);
184};
185
186/* pci_unmap_{single,page} is not a nop, thus... */
187#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
188 dma_addr_t ADDR_NAME;
189#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
190 __u32 LEN_NAME;
191#define pci_unmap_addr(PTR, ADDR_NAME) \
192 ((PTR)->ADDR_NAME)
193#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
194 (((PTR)->ADDR_NAME) = (VAL))
195#define pci_unmap_len(PTR, LEN_NAME) \
196 ((PTR)->LEN_NAME)
197#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
198 (((PTR)->LEN_NAME) = (VAL))
199
200/*
201** Stuff declared in arch/parisc/kernel/pci.c
202*/
203extern struct pci_port_ops *pci_port;
204extern struct pci_bios_ops *pci_bios;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700205
206#ifdef CONFIG_PCI
207extern void pcibios_register_hba(struct pci_hba_data *);
208extern void pcibios_set_master(struct pci_dev *);
209#else
210extern inline void pcibios_register_hba(struct pci_hba_data *x)
211{
212}
213#endif
214
215/*
216 * pcibios_assign_all_busses() is used in drivers/pci/pci.c:pci_do_scan_bus()
217 * 0 == check if bridge is numbered before re-numbering.
218 * 1 == pci_do_scan_bus() should automatically number all PCI-PCI bridges.
219 *
220 * We *should* set this to zero for "legacy" platforms and one
221 * for PAT platforms.
222 *
223 * But legacy platforms also need to renumber the busses below a Host
224 * Bus controller. Adding a 4-port Tulip card on the first PCI root
225 * bus of a C200 resulted in the secondary bus being numbered as 1.
226 * The second PCI host bus controller's root bus had already been
227 * assigned bus number 1 by firmware and sysfs complained.
228 *
229 * Firmware isn't doing anything wrong here since each controller
230 * is its own PCI domain. It's simpler and easier for us to renumber
231 * the busses rather than treat each Dino as a separate PCI domain.
232 * Eventually, we may want to introduce PCI domains for Superdome or
233 * rp7420/8420 boxes and then revisit this issue.
234 */
235#define pcibios_assign_all_busses() (1)
236#define pcibios_scan_all_fns(a, b) (0)
237
238#define PCIBIOS_MIN_IO 0x10
239#define PCIBIOS_MIN_MEM 0x1000 /* NBPG - but pci/setup-res.c dies */
240
241/* Don't support DAC yet. */
242#define pci_dac_dma_supported(pci_dev, mask) (0)
243
244/* export the pci_ DMA API in terms of the dma_ one */
245#include <asm-generic/pci-dma-compat.h>
246
Andrew Mortonbb4a61b2005-06-06 23:07:46 -0700247#ifdef CONFIG_PCI
David S. Millere24c2d92005-06-02 12:55:50 -0700248static inline void pci_dma_burst_advice(struct pci_dev *pdev,
249 enum pci_dma_burst_strategy *strat,
250 unsigned long *strategy_parameter)
251{
252 unsigned long cacheline_size;
253 u8 byte;
254
255 pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
256 if (byte == 0)
257 cacheline_size = 1024;
258 else
259 cacheline_size = (int) byte * 4;
260
261 *strat = PCI_DMA_BURST_MULTIPLE;
262 *strategy_parameter = cacheline_size;
263}
Andrew Mortonbb4a61b2005-06-06 23:07:46 -0700264#endif
David S. Millere24c2d92005-06-02 12:55:50 -0700265
Linus Torvalds1da177e2005-04-16 15:20:36 -0700266extern void
267pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
268 struct resource *res);
269
Dominik Brodowski43c34732005-08-04 18:06:21 -0700270extern void
271pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
272 struct pci_bus_region *region);
273
David S. Miller085ae412005-08-08 13:19:08 -0700274static inline struct resource *
275pcibios_select_root(struct pci_dev *pdev, struct resource *res)
276{
277 struct resource *root = NULL;
278
279 if (res->flags & IORESOURCE_IO)
280 root = &ioport_resource;
281 if (res->flags & IORESOURCE_MEM)
282 root = &iomem_resource;
283
284 return root;
285}
286
Linus Torvalds1da177e2005-04-16 15:20:36 -0700287static inline void pcibios_add_platform_entries(struct pci_dev *dev)
288{
289}
290
Helge Deller10267cd2006-03-26 01:54:16 -0700291static inline void pcibios_penalize_isa_irq(int irq, int active)
292{
293 /* We don't need to penalize isa irq's */
294}
295
Matthew Wilcoxf3120942006-09-19 19:37:09 -0600296static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
297{
298 return channel ? 15 : 14;
299}
300
Linus Torvalds1da177e2005-04-16 15:20:36 -0700301#endif /* __ASM_PARISC_PCI_H */