blob: be7e015719db057d6a3993579bb395c71586ed6b [file] [log] [blame]
David Woodhouse4d2acfb2008-05-23 13:58:12 +01001#
2# kbuild file for firmware/
3#
4
5# Create $(fwabs) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a
6# leading /, it's relative to $(srctree).
7fwdir := $(subst ",,$(CONFIG_EXTRA_FIRMWARE_DIR))
8fwabs := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir))
9
10fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE))
11
David Woodhouse88ecf812008-05-29 11:01:51 +030012# There are three cases to care about:
13# 1. Building kernel with CONFIG_FIRMWARE_IN_KERNEL=y -- $(fw-shipped-y) should
14# include the firmware files to include, according to .config
15# 2. 'make modules_install', which will install firmware for modules, and
16# _also_ for the in-kernel drivers when CONFIG_FIRMWARE_IN_KERNEL=n
17# 3. 'make firmware_install', which installs all firmware, unconditionally.
David Woodhoused172e7f2008-06-25 13:56:07 +010018
David Woodhouse88ecf812008-05-29 11:01:51 +030019# For the former two cases we want $(fw-shipped-y) and $(fw-shipped-m) to be
20# accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all).
21# But be aware that the config file might not be included at all.
22
David Woodhouse0a2a7362008-05-29 19:50:06 +030023fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
David Woodhouse0f805b82008-05-29 16:39:16 +030024fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
David Woodhouse76770662008-05-26 23:01:27 +010025fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
David Woodhousea292f402008-05-29 14:48:34 +030026fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
27 ess/maestro3_assp_minisrc.fw
David Woodhouse18ee6df2008-05-29 15:07:34 +030028fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
29 yamaha/ds1e_ctrl.fw
David Woodhouse79682492008-05-29 17:17:17 +030030fw-shipped-$(CONFIG_USB_KAWETH) += kaweth/new_code.bin kaweth/trigger_code.bin \
31 kaweth/new_code_fix.bin \
32 kaweth/trigger_code_fix.bin
David Woodhouse88ecf812008-05-29 11:01:51 +030033
34fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
35
36# Directories which we _might_ need to create, so we have a rule for them.
37firmware-dirs := $(sort $(patsubst %,$(objtree)/$(obj)/%/,$(dir $(fw-external-y) $(fw-shipped-all))))
David Woodhouse4d2acfb2008-05-23 13:58:12 +010038
39quiet_cmd_mkdir = MKDIR $(patsubst $(objtree)/%,%,$@)
40 cmd_mkdir = mkdir -p $@
41
42quiet_cmd_ihex = IHEX $@
43 cmd_ihex = $(OBJCOPY) -Iihex -Obinary $< $@
44
David Woodhouse8bd6b222008-05-31 15:07:18 +030045quiet_cmd_ihex2fw = IHEX2FW $@
46 cmd_ihex2fw = $(objtree)/$(obj)/ihex2fw $< $@
47
David Woodhouse59890f72008-06-26 13:55:30 +010048quiet_cmd_h16tofw = H16TOFW $@
49 cmd_h16tofw = $(objtree)/$(obj)/ihex2fw -w $< $@
50
David Woodhouse4d2acfb2008-05-23 13:58:12 +010051quiet_cmd_fwbin = MK_FW $@
52 cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)"; \
53 FWSTR="$(subst /,_,$(subst .,_,$(subst -,_,$(patsubst \
54 firmware/%.gen.S,%,$@))))"; \
55 ASM_WORD=$(if $(CONFIG_64BIT),.quad,.long); \
56 ASM_ALIGN=$(if $(CONFIG_64BIT),3,2); \
57 PROGBITS=$(if $(CONFIG_ARM),%,@)progbits; \
58 echo "/* Generated by firmware/Makefile */" > $@;\
59 echo " .section .rodata" >>$@;\
60 echo " .p2align $${ASM_ALIGN}" >>$@;\
61 echo "_fw_$${FWSTR}_bin:" >>$@;\
62 echo " .incbin \"$(2)\"" >>$@;\
63 echo "_fw_end:" >>$@;\
64 echo " .section .rodata.str,\"aMS\",$${PROGBITS},1" >>$@;\
65 echo " .p2align $${ASM_ALIGN}" >>$@;\
66 echo "_fw_$${FWSTR}_name:" >>$@;\
67 echo " .string \"$$FWNAME\"" >>$@;\
68 echo " .section .builtin_fw,\"a\",$${PROGBITS}" >>$@;\
69 echo " .p2align $${ASM_ALIGN}" >>$@;\
70 echo " $${ASM_WORD} _fw_$${FWSTR}_name" >>$@;\
71 echo " $${ASM_WORD} _fw_$${FWSTR}_bin" >>$@;\
72 echo " $${ASM_WORD} _fw_end - _fw_$${FWSTR}_bin" >>$@;
73
74# One of these files will change, or come into existence, whenever
75# the configuration changes between 32-bit and 64-bit. The .S files
76# need to change when that happens.
77wordsize_deps := $(wildcard include/config/64bit.h include/config/32bit.h \
78 include/config/ppc32.h include/config/ppc64.h \
79 include/config/superh32.h include/config/superh64.h \
80 include/config/x86_32.h include/config/x86_64.h)
81
82# Workaround for make < 3.81, where .SECONDEXPANSION doesn't work.
83# It'll end up depending on these targets, so make them a PHONY rule which
84# depends on _all_ the directories in $(firmware-dirs), and it'll work out OK.
85PHONY += $(objtree)/$$(%) $(objtree)/$(obj)/$$(%)
86$(objtree)/$$(%) $(objtree)/$(obj)/$$(%): $(firmware-dirs)
87 @true
88
89# For the $$(dir %) trick, where we need % to be expanded first.
90.SECONDEXPANSION:
91
92$(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) \
93 | $(objtree)/$$(dir %)
94 $(call cmd,fwbin,$(patsubst %.gen.S,%,$@))
95$(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \
96 include/config/builtin/firmware/dir.h | $(objtree)/$$(dir %)
97 $(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@))
98
99# The .o files depend on the binaries directly; the .S files don't.
100$(patsubst %,$(obj)/%.gen.o, $(fw-shipped-y)): %.gen.o: %
101$(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
102
David Woodhouse8bd6b222008-05-31 15:07:18 +0300103# .ihex is used just as a simple way to hold binary files in a source tree
104# where binaries are frowned upon. They are directly converted with objcopy.
David Woodhouse4d2acfb2008-05-23 13:58:12 +0100105$(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
106 $(call cmd,ihex)
107
David Woodhouse8bd6b222008-05-31 15:07:18 +0300108# .HEX is also Intel HEX, but where the offset and length in each record
109# is actually meaningful, because the firmware has to be loaded in a certain
110# order rather than as a single binary blob. Thus, we convert them into our
111# more compact binary representation of ihex records (<linux/ihex.h>)
112$(obj)/%.fw: $(obj)/%.HEX $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
113 $(call cmd,ihex2fw)
114
David Woodhouse59890f72008-06-26 13:55:30 +0100115# .H16 is our own modified form of Intel HEX, with 16-bit length for records.
116$(obj)/%.fw: $(obj)/%.H16 $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
117 $(call cmd,h16tofw)
118
David Woodhouse4d2acfb2008-05-23 13:58:12 +0100119$(firmware-dirs):
120 $(call cmd,mkdir)
121
David Woodhouse88ecf812008-05-29 11:01:51 +0300122obj-y += $(patsubst %,%.gen.o, $(fw-external-y))
123obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y))
David Woodhouse4d2acfb2008-05-23 13:58:12 +0100124
125# Remove .S files and binaries created from ihex
126# (during 'make clean' .config isn't included so they're all in $(fw-shipped-))
127targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \
128 $(shell find $(obj) -name \*.gen.S 2>/dev/null))
129
130# Without this, built-in.o won't be created when it's empty, and the
131# final vmlinux link will fail.
132obj-n := dummy
David Woodhouse8bd6b222008-05-31 15:07:18 +0300133
134hostprogs-y := ihex2fw