blob: 4d9ce73ff730c8eafa6ab4a6f032ba9e54c35d5d [file] [log] [blame]
adam radford00fa2b12011-02-24 20:57:21 -08001Release Date : Thu. Feb 24, 2011 17:00:00 PST 2010 -
2 (emaild-id:megaraidlinux@lsi.com)
3 Adam Radford
4Current Version : 00.00.05.34-rc1
5Old Version : 00.00.05.29-rc1
6 1. Fix some failure gotos from megasas_probe_one(), etc.
7 2. Add missing check_and_restore_queue_depth() call in
8 complete_cmd_fusion().
9 3. Enable MSI-X before calling megasas_init_fw().
10 4. Call tasklet_schedule() even if outbound_intr_status == 0 for MFI based
11 boards in MSI-X mode.
12 5. Fix megasas_probe_one() to clear PCI_MSIX_FLAGS_ENABLE in msi control
13 register in kdump kernel.
14 6. Fix megasas_get_cmd() to only print "Command pool empty" if
15 megasas_dbg_lvl is set.
16 7. Fix megasas_build_dcdb_fusion() to not filter by TYPE_DISK.
17 8. Fix megasas_build_dcdb_fusion() to use io_request->LUN[1] field.
18 9. Add MR_EVT_CFG_CLEARED to megasas_aen_polling().
19 10. Fix tasklet_init() in megasas_init_fw() to use instancet->tasklet.
20 11. Fix fault state handling in megasas_transition_to_ready().
21 12. Fix max_sectors setting for IEEE SGL's.
22 13. Fix iMR OCR support to work correctly.
23-------------------------------------------------------------------------------
adam radford5f7bb3a2010-12-14 19:11:56 -080024Release Date : Tues. Dec 14, 2010 17:00:00 PST 2010 -
25 (emaild-id:megaraidlinux@lsi.com)
26 Adam Radford
27Current Version : 00.00.05.29-rc1
28Old Version : 00.00.04.31-rc1
29 1. Rename megaraid_sas.c to megaraid_sas_base.c.
30 2. Update GPL headers.
31 3. Add MSI-X support and 'msix_disable' module parameter.
32 4. Use lowest memory bar (for SR-IOV VF support).
33 5. Add struct megasas_instance_temlate changes, and change all code to use
34 new instance entries:
35
36 irqreturn_t (*service_isr )(int irq, void *devp);
37 void (*tasklet)(unsigned long);
38 u32 (*init_adapter)(struct megasas_instance *);
39 u32 (*build_and_issue_cmd) (struct megasas_instance *,
40 struct scsi_cmnd *);
41 void (*issue_dcmd) (struct megasas_instance *instance,
42 struct megasas_cmd *cmd);
43
44 6. Add code to support MegaRAID 9265/9285 controllers device id (0x5b).
45-------------------------------------------------------------------------------
Yang, Boe340c352010-10-12 07:21:59 -0600461 Release Date : Thur. May 03, 2010 09:12:45 PST 2009 -
47 (emaild-id:megaraidlinux@lsi.com)
48 Bo Yang
49
502 Current Version : 00.00.04.31-rc1
513 Older Version : 00.00.04.17.1-rc1
52
531. Add the Online Controller Reset (OCR) to the Driver.
54 OCR is the new feature for megaraid_sas driver which
55 will allow the fw to do the chip reset which will not
56 affact the OS behavious.
57
58 To add the OCR support, driver need to do:
59 a). reset the controller chips -- Xscale and Gen2 which
60 will change the function calls and add the reset function
61 related to this two chips.
62
63 b). during the reset, driver will store the pending cmds
64 which not returned by FW to driver's pending queue. Driver
65 will re-issue those pending cmds again to FW after the OCR
66 finished.
67
68 c). In driver's timeout routine, driver will report to
69 OS as reset. Also driver's queue routine will block the
70 cmds until the OCR finished.
71
72 d). in Driver's ISR routine, if driver get the FW state as
73 state change, FW in Failure status and FW support online controller
74 reset (OCR), driver will start to do the controller reset.
75
76 e). In driver's IOCTL routine, the application cmds will wait for the
77 OCR to finish, then issue the cmds to FW.
78
79 f). Before driver kill adapter, driver will do last chance of
80 OCR to see if driver can bring back the FW.
81
822. Add the support update flag to the driver to tell LSI megaraid_sas
83 application which driver will support the device update. So application
84 will not need to do the device update after application add/del the device
85 from the system.
863. In driver's timeout routine, driver will do three time reset if fw is in
87 failed state. Driver will kill adapter if can't bring back FW after the
88 this three times reset.
894. Add the input parameter max_sectors to 1MB support to our GEN2 controller.
90 customer can use the input paramenter max_sectors to add 1MB support to GEN2
91 controller.
92
Yang, Bo63bad452009-12-06 08:42:28 -0700931 Release Date : Thur. Oct 29, 2009 09:12:45 PST 2009 -
94 (emaild-id:megaraidlinux@lsi.com)
95 Bo Yang
96
972 Current Version : 00.00.04.17.1-rc1
983 Older Version : 00.00.04.12
99
1001. Add the pad_0 in mfi frame structure to 0 to fix the
101 context value larger than 32bit value issue.
102
1032. Add the logic drive list to the driver. Driver will
104 keep the logic drive list internal after driver load.
105
1063. driver fixed the device update issue after get the AEN
107 PD delete/ADD, LD add/delete from FW.
108
Yang, Boa0b77362009-10-06 14:55:09 -06001091 Release Date : Tues. July 28, 2009 10:12:45 PST 2009 -
110 (emaild-id:megaraidlinux@lsi.com)
111 Bo Yang
112
1132 Current Version : 00.00.04.12
1143 Older Version : 00.00.04.10
115
1161. Change the AEN sys PD update from scsi_scan to
117 scsi_add_device and scsi_remove_device.
1182. Takeoff the debug print-out in aen_polling routine.
119
1201 Release Date : Thur. July 02, 2009 10:12:45 PST 2009 -
121 (emaild-id:megaraidlinux@lsi.com)
122 Bo Yang
123
1242 Current Version : 00.00.04.10
1253 Older Version : 00.00.04.08
126
1271. Add the 3 mins timeout during the controller initialize.
1282. Add the fix for 64bit sense date errors.
129
1301 Release Date : Tues. May 05, 2009 10:12:45 PST 2009 -
131 (emaild-id:megaraidlinux@lsi.com)
132 Bo Yang
133
1342 Current Version : 00.00.04.08
1353 Older Version : 00.00.04.06
136
1371. Add the fix of pending in FW after deleted the logic drives.
1382. Add the fix of deallocating memory after get pdlist.
139
1401 Release Date : Tues. March 26, 2009 10:12:45 PST 2009 -
141 (emaild-id:megaraidlinux@lsi.com)
142 Bo Yang
143
1442 Current Version : 00.00.04.06
1453 Older Version : 00.00.04.04
146
1471. Add the fix of the driver cmd empty fix of the driver cmd empty.
1482. Add the fix of the driver MSM AEN CMD cause the system slow.
149
1501 Release Date : Tues. March 03, 2009 10:12:45 PST 2009 -
151 (emaild-id:megaraidlinux@lsi.com)
152 Bo Yang
153
1542 Current Version : 00.00.04.04
1553 Older Version : 00.00.04.01
156
1571. Add the Tape drive fix to the driver: If the command is for
158 the tape device, set the pthru timeout to the os layer timeout value.
159
1602. Add Poll_wait mechanism to Gen-2 Linux driv.
161 In the aen handler, driver needs to wakeup poll handler similar to
162 the way it raises SIGIO.
163
1643. Add new controller new SAS2 support to the driver.
165
1664. Report the unconfigured PD (system PD) to OS.
167
1685. Add the IEEE SGL support to the driver
169
1706. Reasign the Application cmds to SAS2 controller
Yang, Bo24541f92008-08-10 12:42:39 -0700171
1721 Release Date : Thur.July. 24 11:41:51 PST 2008 -
173 (emaild-id:megaraidlinux@lsi.com)
174 Sumant Patro
175 Bo Yang
176
1772 Current Version : 00.00.04.01
1783 Older Version : 00.00.03.22
179
1801. Add the new controller (0078, 0079) support to the driver
181 Those controllers are LSI's next generatation(gen2) SAS controllers.
182
1831 Release Date : Mon.June. 23 10:12:45 PST 2008 -
184 (emaild-id:megaraidlinux@lsi.com)
185 Sumant Patro
186 Bo Yang
187
1882 Current Version : 00.00.03.22
1893 Older Version : 00.00.03.20
190
1911. Add shutdown DCMD cmd to the shutdown routine to make FW shutdown proper.
1922. Unexpected interrupt occurs in HWR Linux driver, add the dumy readl pci flush will fix this issue.
193
bo yang127ce972008-04-29 03:55:33 -04001941 Release Date : Mon. March 10 11:02:31 PDT 2008 -
195 (emaild-id:megaraidlinux@lsi.com)
196 Sumant Patro
197 Bo Yang
198
1992 Current Version : 00.00.03.20-RC1
2003 Older Version : 00.00.03.16
201
2021. Rollback the sense info implementation
203 Sense buffer ptr data type in the ioctl path is reverted back
204 to u32 * as in previous versions of driver.
205
2062. Fixed the driver frame count.
207 When Driver sent wrong frame count to firmware. As this
208 particular command is sent to drive, FW is seeing continuous
209 chip resets and so the command will timeout.
210
2113. Add the new controller(1078DE) support to the driver
212 and Increase the max_wait to 60 from 10 in the controller
213 operational status. With this max_wait increase, driver will
214 make sure the FW will finish the pending cmd for KDUMP case.
215
bo yangf28cd7c2007-11-09 04:44:56 -05002161 Release Date : Thur. Nov. 07 16:30:43 PST 2007 -
217 (emaild-id:megaraidlinux@lsi.com)
218 Sumant Patro
219 Bo Yang
220
2212 Current Version : 00.00.03.16
2223 Older Version : 00.00.03.15
223
2241. Increased MFI_POLL_TIMEOUT_SECS to 60 seconds from 10. FW may take
225 a max of 60 seconds to respond to the INIT cmd.
226
2271 Release Date : Fri. Sep. 07 16:30:43 PST 2007 -
228 (emaild-id:megaraidlinux@lsi.com)
229 Sumant Patro
230 Bo Yang
231
2322 Current Version : 00.00.03.15
2333 Older Version : 00.00.03.14
234
2351. Added module parameter "poll_mode_io" to support for "polling"
236 (reduced interrupt operation). In this mode, IO completion
237 interrupts are delayed. At the end of initiating IOs, the
238 driver schedules for cmd completion if there are pending cmds
239 to be completed. A timer-based interrupt has also been added
240 to prevent IO completion processing from being delayed
241 indefinitely in the case that no new IOs are initiated.
242
2431 Release Date : Fri. Sep. 07 16:30:43 PST 2007 -
244 (emaild-id:megaraidlinux@lsi.com)
245 Sumant Patro
246 Bo Yang
247
2482 Current Version : 00.00.03.14
2493 Older Version : 00.00.03.13
250
2511. Setting the max_sectors_per_req based on max SGL supported by the
252 FW. Prior versions calculated this value from controller info
253 (max_sectors_1, max_sectors_2). For certain controllers/FW,
254 this was resulting in a value greater than max SGL supported
255 by the FW. Issue was first reported by users running LUKS+XFS
256 with megaraid_sas. Thanks to RB for providing the logs and
257 duplication steps that helped to get to the root cause of the
258 issue. 2. Increased MFI_POLL_TIMEOUT_SECS to 60 seconds from
259 10. FW may take a max of 60 seconds to respond to the INIT
260 cmd.
261
2621 Release Date : Fri. June. 15 16:30:43 PST 2007 -
263 (emaild-id:megaraidlinux@lsi.com)
264 Sumant Patro
265 Bo Yang
266
2672 Current Version : 00.00.03.13
2683 Older Version : 00.00.03.12
269
2701. Added the megasas_reset_timer routine to intercept cmd timeout and throttle io.
271
272On Fri, 2007-03-16 at 16:44 -0600, James Bottomley wrote:
273It looks like megaraid_sas at least needs this to throttle its commands
274> as they begin to time out. The code keeps the existing transport
275> template use of eh_timed_out (and allows the transport to override the
276> host if they both have this callback).
277>
278> James
279
2801 Release Date : Sat May. 12 16:30:43 PST 2007 -
281 (emaild-id:megaraidlinux@lsi.com)
282 Sumant Patro
283 Bo Yang
284
2852 Current Version : 00.00.03.12
2863 Older Version : 00.00.03.11
287
2881. When MegaSAS driver receives reset call from OS, driver waits in reset
289routine for max 3 minutes for all pending command completion. Now driver will
290call completion routine every 5 seconds from the reset routine instead of
291waiting for depending on cmd completion from isr path.
292
2931 Release Date : Mon Apr. 30 10:25:52 PST 2007 -
294 (emaild-id:megaraidlinux@lsi.com)
295 Sumant Patro
296 Bo Yang
297
2982 Current Version : 00.00.03.11
2993 Older Version : 00.00.03.09
300
301 1. Memory Manager for IOCTL removed for 2.6 kernels.
302 pci_alloc_consistent replaced by dma_alloc_coherent. With this
303 change there is no need of memory manager in the driver code
304
305 On Wed, 2007-02-07 at 13:30 -0800, Andrew Morton wrote:
306 > I suspect all this horror is due to stupidity in the DMA API.
307 >
308 > pci_alloc_consistent() just goes and assumes GFP_ATOMIC, whereas
309 > the caller (megasas_mgmt_fw_ioctl) would have been perfectly happy
310 > to use GFP_KERNEL.
311 >
312 > I bet this fixes it
313
314 It does, but the DMA API was expanded to cope with this exact case, so
315 use dma_alloc_coherent() directly in the megaraid code instead. The dev
316 is just &pci_dev->dev.
317
318 James <James.Bottomley@SteelEye.com>
319
320 3. SYNCHRONIZE_CACHE is not supported by FW and thus blocked by driver.
321 4. Hibernation support added
322 5. Performing diskdump while running IO in RHEL 4 was failing. Fixed.
323
3241 Release Date : Fri Feb. 09 14:36:28 PST 2007 -
325 (emaild-id:megaraidlinux@lsi.com)
326 Sumant Patro
327 Bo Yang
328
3292 Current Version : 00.00.03.09
3303 Older Version : 00.00.03.08
331
332i. Under heavy IO mid-layer prints "DRIVER_TIMEOUT" errors
333
334 The driver now waits for 10 seconds to elapse instead of 5 (as in
335 previous release) to resume IO.
336
3371 Release Date : Mon Feb. 05 11:35:24 PST 2007 -
338 (emaild-id:megaraidlinux@lsi.com)
339 Sumant Patro
340 Bo Yang
3412 Current Version : 00.00.03.08
3423 Older Version : 00.00.03.07
343
344i. Under heavy IO mid-layer prints "DRIVER_TIMEOUT" errors
345
346 Fix: The driver is now throttling IO.
347 Checks added in megasas_queue_command to know if FW is able to
348 process commands within timeout period. If number of retries
349 is 2 or greater,the driver stops sending cmd to FW temporarily. IO is
350 resumed if pending cmd count reduces to 16 or 5 seconds has elapsed
351 from the time cmds were last sent to FW.
352
353ii. FW enables WCE bit in Mode Sense cmd for drives that are configured
354 as WriteBack. The OS may send "SYNCHRONIZE_CACHE" cmd when Logical
355 Disks are exposed with WCE=1. User is advised to enable Write Back
356 mode only when the controller has battery backup. At this time
357 Synhronize cache is not supported by the FW. Driver will short-cycle
André Goddard Rosaaf901ca2009-11-14 13:09:05 -0200358 the cmd and return success without sending down to FW.
bo yangf28cd7c2007-11-09 04:44:56 -0500359
3601 Release Date : Sun Jan. 14 11:21:32 PDT 2007 -
361 Sumant Patro <Sumant.Patro@lsil.com>/Bo Yang
3622 Current Version : 00.00.03.07
3633 Older Version : 00.00.03.06
364
365i. bios_param entry added in scsi_host_template that returns disk geometry
366 information.
367
3681 Release Date : Fri Oct 20 11:21:32 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>/Bo Yang
3692 Current Version : 00.00.03.06
3703 Older Version : 00.00.03.05
371
3721. Added new memory management module to support the IOCTL memory allocation. For IOCTL we try to allocate from the memory pool created during driver initialization. If mem pool is empty then we allocate at run time.
3732. Added check in megasas_queue_command and dpc/isr routine to see if we have already declared adapter dead
374 (hw_crit_error=1). If hw_crit_error==1, now we donot accept any processing of pending cmds/accept any cmd from OS
Sumant Patroe4a082c2006-05-30 12:03:37 -0700375
Sumant Patro2a3681e2006-10-03 13:19:21 -07003761 Release Date : Mon Oct 02 11:21:32 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
3772 Current Version : 00.00.03.05
3783 Older Version : 00.00.03.04
379
380i. PCI_DEVICE macro used
381
382 Convert the pci_device_id-table of the megaraid_sas-driver to the PCI_DEVICE-macro, to safe some lines.
383
384 - Henrik Kretzschmar <henne@nachtwindheim.de>
385ii. All compiler warnings removed
386iii. megasas_ctrl_info struct reverted to 3.02 release
387iv. Default value of megasas_dbg_lvl set to 0
388v. Removing in megasas_exit the sysfs entry created for megasas_dbg_lvl
389vi. In megasas_teardown_frame_pool(), cmd->frame was passed instead of
390 cmd->sense to pci_pool_free. Fixed. Bug was pointed out by
391 Eric Sesterhenn
392
3931 Release Date : Wed Sep 13 14:22:51 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
3942 Current Version : 00.00.03.04
3953 Older Version : 00.00.03.03
396
397i. Added Reboot notify
398ii. Reduced by 1 max cmds sent to FW from Driver to make the reply_q_sz same
399 as Max Cmds FW can support
400
4011 Release Date : Tue Aug 22 16:33:14 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
4022 Current Version : 00.00.03.03
4033 Older Version : 00.00.03.02
404
405i. Send stop adapter to FW & Dump pending FW cmds before declaring adapter dead.
406 New varible added to set dbg level.
407ii. Disable interrupt made as fn pointer as they are different for 1068 / 1078
408iii. Frame count optimization. Main frame can contain 2 SGE for 64 bit SGLs and
409 3 SGE for 32 bit SGL
410iv. Tasklet added for cmd completion
411v. If FW in operational state before firing INIT, now we send RESET Flag to FW instead of just READY. This is used to do soft reset.
412vi. megasas_ctrl_prop structure updated (based on FW struct)
413vii. Added print : FW now in Ready State during initialization
414
4151 Release Date : Sun Aug 06 22:49:52 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
4162 Current Version : 00.00.03.02
4173 Older Version : 00.00.03.01
418
419i. Added FW tranistion state for Hotplug scenario
420
Sumant Patro0e989362006-06-20 15:32:37 -07004211 Release Date : Sun May 14 22:49:52 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
4222 Current Version : 00.00.03.01
4233 Older Version : 00.00.02.04
424
425i. Added support for ZCR controller.
426
427 New device id 0x413 added.
428
429ii. Bug fix : Disable controller interrupt before firing INIT cmd to FW.
430
431 Interrupt is enabled after required initialization is over.
432 This is done to ensure that driver is ready to handle interrupts when
433 it is generated by the controller.
434
435 -Sumant Patro <Sumant.Patro@lsil.com>
436
Sumant Patroe4a082c2006-05-30 12:03:37 -07004371 Release Date : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
4382 Current Version : 00.00.02.04
4393 Older Version : 00.00.02.04
440
441i. Remove superflous instance_lock
442
443 gets rid of the otherwise superflous instance_lock and avoids an unsave
444 unsynchronized access in the error handler.
445
446 - Christoph Hellwig <hch@lst.de>
447
448
Sumant Patrof9876f02006-02-03 15:34:35 -08004491 Release Date : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
4502 Current Version : 00.00.02.04
4513 Older Version : 00.00.02.04
452
453i. Support for 1078 type (ppc IOP) controller, device id : 0x60 added.
454 During initialization, depending on the device id, the template members
455 are initialized with function pointers specific to the ppc or
456 xscale controllers.
457
458 -Sumant Patro <Sumant.Patro@lsil.com>
459
Joshua Giles122da302006-02-03 15:34:17 -08004601 Release Date : Fri Feb 03 14:16:25 PST 2006 - Sumant Patro
461 <Sumant.Patro@lsil.com>
4622 Current Version : 00.00.02.04
4633 Older Version : 00.00.02.02
464i. Register 16 byte CDB capability with scsi midlayer
465
466 "Ths patch properly registers the 16 byte command length capability of the
467 megaraid_sas controlled hardware with the scsi midlayer. All megaraid_sas
468 hardware supports 16 byte CDB's."
469
470 -Joshua Giles <joshua_giles@dell.com>
471
Sumant Patro1341c932006-01-25 12:02:40 -08004721 Release Date : Mon Jan 23 14:09:01 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
4732 Current Version : 00.00.02.02
4743 Older Version : 00.00.02.01
475
476i. New template defined to represent each family of controllers (identified by processor used).
477 The template will have defintions that will be initialised to appropritae values for a specific family of controllers. The template definition has four function pointers. During driver initialisation the function pointers will be set based on the controller family type. This change is done to support new controllers that has different processors and thus different register set.
478
479 -Sumant Patro <Sumant.Patro@lsil.com>
480
Sumant Patrocb59aa62006-01-25 11:53:25 -08004811 Release Date : Mon Dec 19 14:36:26 PST 2005 - Sumant Patro <Sumant.Patro@lsil.com>
4822 Current Version : 00.00.02.00-rc4
4833 Older Version : 00.00.02.01
484
485i. Code reorganized to remove code duplication in megasas_build_cmd.
486
487 "There's a lot of duplicate code megasas_build_cmd. Move that out of the different codepathes and merge the reminder of megasas_build_cmd into megasas_queue_command"
488
489 - Christoph Hellwig <hch@lst.de>
490
491ii. Defined MEGASAS_IOC_FIRMWARE32 for code paths that handles 32 bit applications in 64 bit systems.
492
493 "MEGASAS_IOC_FIRMWARE can't be redefined if CONFIG_COMPAT is set, we need to define a MEGASAS_IOC_FIRMWARE32 define so native binaries continue to work"
494
495 - Christoph Hellwig <hch@lst.de>