blob: cc68f5706acf6ad6bc9e1518a4fc771b3a0eb967 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
Jeff Garzikaf36d7f2005-08-28 20:18:39 -04002 * libata-core.c - helper library for ATA
3 *
4 * Maintained by: Jeff Garzik <jgarzik@pobox.com>
5 * Please ALWAYS copy linux-ide@vger.kernel.org
6 * on emails.
7 *
8 * Copyright 2003-2004 Red Hat, Inc. All rights reserved.
9 * Copyright 2003-2004 Jeff Garzik
10 *
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2, or (at your option)
15 * any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; see the file COPYING. If not, write to
24 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
25 *
26 *
27 * libata documentation is available via 'make {ps|pdf}docs',
28 * as Documentation/DocBook/libata.*
29 *
30 * Hardware documentation available from http://www.t13.org/ and
31 * http://www.sata-io.org/
32 *
Linus Torvalds1da177e2005-04-16 15:20:36 -070033 */
34
35#include <linux/config.h>
36#include <linux/kernel.h>
37#include <linux/module.h>
38#include <linux/pci.h>
39#include <linux/init.h>
40#include <linux/list.h>
41#include <linux/mm.h>
42#include <linux/highmem.h>
43#include <linux/spinlock.h>
44#include <linux/blkdev.h>
45#include <linux/delay.h>
46#include <linux/timer.h>
47#include <linux/interrupt.h>
48#include <linux/completion.h>
49#include <linux/suspend.h>
50#include <linux/workqueue.h>
51#include <scsi/scsi.h>
52#include "scsi.h"
53#include "scsi_priv.h"
54#include <scsi/scsi_host.h>
55#include <linux/libata.h>
56#include <asm/io.h>
57#include <asm/semaphore.h>
58#include <asm/byteorder.h>
59
60#include "libata.h"
61
62static unsigned int ata_busy_sleep (struct ata_port *ap,
63 unsigned long tmout_pat,
64 unsigned long tmout);
65static void ata_set_mode(struct ata_port *ap);
66static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev);
67static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift);
68static int fgb(u32 bitmap);
69static int ata_choose_xfer_mode(struct ata_port *ap,
70 u8 *xfer_mode_out,
71 unsigned int *xfer_shift_out);
72static int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat);
73static void __ata_qc_complete(struct ata_queued_cmd *qc);
74
75static unsigned int ata_unique_id = 1;
76static struct workqueue_struct *ata_wq;
77
Jeff Garzik1623c812005-08-30 03:37:42 -040078int atapi_enabled = 0;
79module_param(atapi_enabled, int, 0444);
80MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
81
Linus Torvalds1da177e2005-04-16 15:20:36 -070082MODULE_AUTHOR("Jeff Garzik");
83MODULE_DESCRIPTION("Library module for ATA devices");
84MODULE_LICENSE("GPL");
85MODULE_VERSION(DRV_VERSION);
86
87/**
88 * ata_tf_load - send taskfile registers to host controller
89 * @ap: Port to which output is sent
90 * @tf: ATA taskfile register set
91 *
92 * Outputs ATA taskfile to standard ATA host controller.
93 *
94 * LOCKING:
95 * Inherited from caller.
96 */
97
98static void ata_tf_load_pio(struct ata_port *ap, struct ata_taskfile *tf)
99{
100 struct ata_ioports *ioaddr = &ap->ioaddr;
101 unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
102
103 if (tf->ctl != ap->last_ctl) {
104 outb(tf->ctl, ioaddr->ctl_addr);
105 ap->last_ctl = tf->ctl;
106 ata_wait_idle(ap);
107 }
108
109 if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
110 outb(tf->hob_feature, ioaddr->feature_addr);
111 outb(tf->hob_nsect, ioaddr->nsect_addr);
112 outb(tf->hob_lbal, ioaddr->lbal_addr);
113 outb(tf->hob_lbam, ioaddr->lbam_addr);
114 outb(tf->hob_lbah, ioaddr->lbah_addr);
115 VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
116 tf->hob_feature,
117 tf->hob_nsect,
118 tf->hob_lbal,
119 tf->hob_lbam,
120 tf->hob_lbah);
121 }
122
123 if (is_addr) {
124 outb(tf->feature, ioaddr->feature_addr);
125 outb(tf->nsect, ioaddr->nsect_addr);
126 outb(tf->lbal, ioaddr->lbal_addr);
127 outb(tf->lbam, ioaddr->lbam_addr);
128 outb(tf->lbah, ioaddr->lbah_addr);
129 VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
130 tf->feature,
131 tf->nsect,
132 tf->lbal,
133 tf->lbam,
134 tf->lbah);
135 }
136
137 if (tf->flags & ATA_TFLAG_DEVICE) {
138 outb(tf->device, ioaddr->device_addr);
139 VPRINTK("device 0x%X\n", tf->device);
140 }
141
142 ata_wait_idle(ap);
143}
144
145/**
146 * ata_tf_load_mmio - send taskfile registers to host controller
147 * @ap: Port to which output is sent
148 * @tf: ATA taskfile register set
149 *
150 * Outputs ATA taskfile to standard ATA host controller using MMIO.
151 *
152 * LOCKING:
153 * Inherited from caller.
154 */
155
156static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf)
157{
158 struct ata_ioports *ioaddr = &ap->ioaddr;
159 unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
160
161 if (tf->ctl != ap->last_ctl) {
162 writeb(tf->ctl, (void __iomem *) ap->ioaddr.ctl_addr);
163 ap->last_ctl = tf->ctl;
164 ata_wait_idle(ap);
165 }
166
167 if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
168 writeb(tf->hob_feature, (void __iomem *) ioaddr->feature_addr);
169 writeb(tf->hob_nsect, (void __iomem *) ioaddr->nsect_addr);
170 writeb(tf->hob_lbal, (void __iomem *) ioaddr->lbal_addr);
171 writeb(tf->hob_lbam, (void __iomem *) ioaddr->lbam_addr);
172 writeb(tf->hob_lbah, (void __iomem *) ioaddr->lbah_addr);
173 VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
174 tf->hob_feature,
175 tf->hob_nsect,
176 tf->hob_lbal,
177 tf->hob_lbam,
178 tf->hob_lbah);
179 }
180
181 if (is_addr) {
182 writeb(tf->feature, (void __iomem *) ioaddr->feature_addr);
183 writeb(tf->nsect, (void __iomem *) ioaddr->nsect_addr);
184 writeb(tf->lbal, (void __iomem *) ioaddr->lbal_addr);
185 writeb(tf->lbam, (void __iomem *) ioaddr->lbam_addr);
186 writeb(tf->lbah, (void __iomem *) ioaddr->lbah_addr);
187 VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
188 tf->feature,
189 tf->nsect,
190 tf->lbal,
191 tf->lbam,
192 tf->lbah);
193 }
194
195 if (tf->flags & ATA_TFLAG_DEVICE) {
196 writeb(tf->device, (void __iomem *) ioaddr->device_addr);
197 VPRINTK("device 0x%X\n", tf->device);
198 }
199
200 ata_wait_idle(ap);
201}
202
Edward Falk0baab862005-06-02 18:17:13 -0400203
204/**
205 * ata_tf_load - send taskfile registers to host controller
206 * @ap: Port to which output is sent
207 * @tf: ATA taskfile register set
208 *
209 * Outputs ATA taskfile to standard ATA host controller using MMIO
210 * or PIO as indicated by the ATA_FLAG_MMIO flag.
211 * Writes the control, feature, nsect, lbal, lbam, and lbah registers.
212 * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect,
213 * hob_lbal, hob_lbam, and hob_lbah.
214 *
215 * This function waits for idle (!BUSY and !DRQ) after writing
216 * registers. If the control register has a new value, this
217 * function also waits for idle after writing control and before
218 * writing the remaining registers.
219 *
220 * May be used as the tf_load() entry in ata_port_operations.
221 *
222 * LOCKING:
223 * Inherited from caller.
224 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700225void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
226{
227 if (ap->flags & ATA_FLAG_MMIO)
228 ata_tf_load_mmio(ap, tf);
229 else
230 ata_tf_load_pio(ap, tf);
231}
232
233/**
Edward Falk0baab862005-06-02 18:17:13 -0400234 * ata_exec_command_pio - issue ATA command to host controller
Linus Torvalds1da177e2005-04-16 15:20:36 -0700235 * @ap: port to which command is being issued
236 * @tf: ATA taskfile register set
237 *
Edward Falk0baab862005-06-02 18:17:13 -0400238 * Issues PIO write to ATA command register, with proper
Linus Torvalds1da177e2005-04-16 15:20:36 -0700239 * synchronization with interrupt handler / other threads.
240 *
241 * LOCKING:
242 * spin_lock_irqsave(host_set lock)
243 */
244
245static void ata_exec_command_pio(struct ata_port *ap, struct ata_taskfile *tf)
246{
247 DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
248
249 outb(tf->command, ap->ioaddr.command_addr);
250 ata_pause(ap);
251}
252
253
254/**
255 * ata_exec_command_mmio - issue ATA command to host controller
256 * @ap: port to which command is being issued
257 * @tf: ATA taskfile register set
258 *
259 * Issues MMIO write to ATA command register, with proper
260 * synchronization with interrupt handler / other threads.
261 *
262 * LOCKING:
263 * spin_lock_irqsave(host_set lock)
264 */
265
266static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf)
267{
268 DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
269
270 writeb(tf->command, (void __iomem *) ap->ioaddr.command_addr);
271 ata_pause(ap);
272}
273
Edward Falk0baab862005-06-02 18:17:13 -0400274
275/**
276 * ata_exec_command - issue ATA command to host controller
277 * @ap: port to which command is being issued
278 * @tf: ATA taskfile register set
279 *
280 * Issues PIO/MMIO write to ATA command register, with proper
281 * synchronization with interrupt handler / other threads.
282 *
283 * LOCKING:
284 * spin_lock_irqsave(host_set lock)
285 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700286void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf)
287{
288 if (ap->flags & ATA_FLAG_MMIO)
289 ata_exec_command_mmio(ap, tf);
290 else
291 ata_exec_command_pio(ap, tf);
292}
293
294/**
295 * ata_exec - issue ATA command to host controller
296 * @ap: port to which command is being issued
297 * @tf: ATA taskfile register set
298 *
299 * Issues PIO/MMIO write to ATA command register, with proper
300 * synchronization with interrupt handler / other threads.
301 *
302 * LOCKING:
303 * Obtains host_set lock.
304 */
305
306static inline void ata_exec(struct ata_port *ap, struct ata_taskfile *tf)
307{
308 unsigned long flags;
309
310 DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
311 spin_lock_irqsave(&ap->host_set->lock, flags);
312 ap->ops->exec_command(ap, tf);
313 spin_unlock_irqrestore(&ap->host_set->lock, flags);
314}
315
316/**
317 * ata_tf_to_host - issue ATA taskfile to host controller
318 * @ap: port to which command is being issued
319 * @tf: ATA taskfile register set
320 *
321 * Issues ATA taskfile register set to ATA host controller,
322 * with proper synchronization with interrupt handler and
323 * other threads.
324 *
325 * LOCKING:
326 * Obtains host_set lock.
327 */
328
329static void ata_tf_to_host(struct ata_port *ap, struct ata_taskfile *tf)
330{
331 ap->ops->tf_load(ap, tf);
332
333 ata_exec(ap, tf);
334}
335
336/**
337 * ata_tf_to_host_nolock - issue ATA taskfile to host controller
338 * @ap: port to which command is being issued
339 * @tf: ATA taskfile register set
340 *
341 * Issues ATA taskfile register set to ATA host controller,
342 * with proper synchronization with interrupt handler and
343 * other threads.
344 *
345 * LOCKING:
346 * spin_lock_irqsave(host_set lock)
347 */
348
349void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf)
350{
351 ap->ops->tf_load(ap, tf);
352 ap->ops->exec_command(ap, tf);
353}
354
355/**
Edward Falk0baab862005-06-02 18:17:13 -0400356 * ata_tf_read_pio - input device's ATA taskfile shadow registers
Linus Torvalds1da177e2005-04-16 15:20:36 -0700357 * @ap: Port from which input is read
358 * @tf: ATA taskfile register set for storing input
359 *
360 * Reads ATA taskfile registers for currently-selected device
361 * into @tf.
362 *
363 * LOCKING:
364 * Inherited from caller.
365 */
366
367static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf)
368{
369 struct ata_ioports *ioaddr = &ap->ioaddr;
370
371 tf->nsect = inb(ioaddr->nsect_addr);
372 tf->lbal = inb(ioaddr->lbal_addr);
373 tf->lbam = inb(ioaddr->lbam_addr);
374 tf->lbah = inb(ioaddr->lbah_addr);
375 tf->device = inb(ioaddr->device_addr);
376
377 if (tf->flags & ATA_TFLAG_LBA48) {
378 outb(tf->ctl | ATA_HOB, ioaddr->ctl_addr);
379 tf->hob_feature = inb(ioaddr->error_addr);
380 tf->hob_nsect = inb(ioaddr->nsect_addr);
381 tf->hob_lbal = inb(ioaddr->lbal_addr);
382 tf->hob_lbam = inb(ioaddr->lbam_addr);
383 tf->hob_lbah = inb(ioaddr->lbah_addr);
384 }
385}
386
387/**
388 * ata_tf_read_mmio - input device's ATA taskfile shadow registers
389 * @ap: Port from which input is read
390 * @tf: ATA taskfile register set for storing input
391 *
392 * Reads ATA taskfile registers for currently-selected device
393 * into @tf via MMIO.
394 *
395 * LOCKING:
396 * Inherited from caller.
397 */
398
399static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf)
400{
401 struct ata_ioports *ioaddr = &ap->ioaddr;
402
403 tf->nsect = readb((void __iomem *)ioaddr->nsect_addr);
404 tf->lbal = readb((void __iomem *)ioaddr->lbal_addr);
405 tf->lbam = readb((void __iomem *)ioaddr->lbam_addr);
406 tf->lbah = readb((void __iomem *)ioaddr->lbah_addr);
407 tf->device = readb((void __iomem *)ioaddr->device_addr);
408
409 if (tf->flags & ATA_TFLAG_LBA48) {
410 writeb(tf->ctl | ATA_HOB, (void __iomem *) ap->ioaddr.ctl_addr);
411 tf->hob_feature = readb((void __iomem *)ioaddr->error_addr);
412 tf->hob_nsect = readb((void __iomem *)ioaddr->nsect_addr);
413 tf->hob_lbal = readb((void __iomem *)ioaddr->lbal_addr);
414 tf->hob_lbam = readb((void __iomem *)ioaddr->lbam_addr);
415 tf->hob_lbah = readb((void __iomem *)ioaddr->lbah_addr);
416 }
417}
418
Edward Falk0baab862005-06-02 18:17:13 -0400419
420/**
421 * ata_tf_read - input device's ATA taskfile shadow registers
422 * @ap: Port from which input is read
423 * @tf: ATA taskfile register set for storing input
424 *
425 * Reads ATA taskfile registers for currently-selected device
426 * into @tf.
427 *
428 * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48
429 * is set, also reads the hob registers.
430 *
431 * May be used as the tf_read() entry in ata_port_operations.
432 *
433 * LOCKING:
434 * Inherited from caller.
435 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700436void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
437{
438 if (ap->flags & ATA_FLAG_MMIO)
439 ata_tf_read_mmio(ap, tf);
440 else
441 ata_tf_read_pio(ap, tf);
442}
443
444/**
445 * ata_check_status_pio - Read device status reg & clear interrupt
446 * @ap: port where the device is
447 *
448 * Reads ATA taskfile status register for currently-selected device
Edward Falk0baab862005-06-02 18:17:13 -0400449 * and return its value. This also clears pending interrupts
Linus Torvalds1da177e2005-04-16 15:20:36 -0700450 * from this device
451 *
452 * LOCKING:
453 * Inherited from caller.
454 */
455static u8 ata_check_status_pio(struct ata_port *ap)
456{
457 return inb(ap->ioaddr.status_addr);
458}
459
460/**
461 * ata_check_status_mmio - Read device status reg & clear interrupt
462 * @ap: port where the device is
463 *
464 * Reads ATA taskfile status register for currently-selected device
Edward Falk0baab862005-06-02 18:17:13 -0400465 * via MMIO and return its value. This also clears pending interrupts
Linus Torvalds1da177e2005-04-16 15:20:36 -0700466 * from this device
467 *
468 * LOCKING:
469 * Inherited from caller.
470 */
471static u8 ata_check_status_mmio(struct ata_port *ap)
472{
473 return readb((void __iomem *) ap->ioaddr.status_addr);
474}
475
Edward Falk0baab862005-06-02 18:17:13 -0400476
477/**
478 * ata_check_status - Read device status reg & clear interrupt
479 * @ap: port where the device is
480 *
481 * Reads ATA taskfile status register for currently-selected device
482 * and return its value. This also clears pending interrupts
483 * from this device
484 *
485 * May be used as the check_status() entry in ata_port_operations.
486 *
487 * LOCKING:
488 * Inherited from caller.
489 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700490u8 ata_check_status(struct ata_port *ap)
491{
492 if (ap->flags & ATA_FLAG_MMIO)
493 return ata_check_status_mmio(ap);
494 return ata_check_status_pio(ap);
495}
496
Edward Falk0baab862005-06-02 18:17:13 -0400497
498/**
499 * ata_altstatus - Read device alternate status reg
500 * @ap: port where the device is
501 *
502 * Reads ATA taskfile alternate status register for
503 * currently-selected device and return its value.
504 *
505 * Note: may NOT be used as the check_altstatus() entry in
506 * ata_port_operations.
507 *
508 * LOCKING:
509 * Inherited from caller.
510 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700511u8 ata_altstatus(struct ata_port *ap)
512{
513 if (ap->ops->check_altstatus)
514 return ap->ops->check_altstatus(ap);
515
516 if (ap->flags & ATA_FLAG_MMIO)
517 return readb((void __iomem *)ap->ioaddr.altstatus_addr);
518 return inb(ap->ioaddr.altstatus_addr);
519}
520
Edward Falk0baab862005-06-02 18:17:13 -0400521
522/**
523 * ata_chk_err - Read device error reg
524 * @ap: port where the device is
525 *
526 * Reads ATA taskfile error register for
527 * currently-selected device and return its value.
528 *
529 * Note: may NOT be used as the check_err() entry in
530 * ata_port_operations.
531 *
532 * LOCKING:
533 * Inherited from caller.
534 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700535u8 ata_chk_err(struct ata_port *ap)
536{
537 if (ap->ops->check_err)
538 return ap->ops->check_err(ap);
539
540 if (ap->flags & ATA_FLAG_MMIO) {
541 return readb((void __iomem *) ap->ioaddr.error_addr);
542 }
543 return inb(ap->ioaddr.error_addr);
544}
545
546/**
547 * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
548 * @tf: Taskfile to convert
549 * @fis: Buffer into which data will output
550 * @pmp: Port multiplier port
551 *
552 * Converts a standard ATA taskfile to a Serial ATA
553 * FIS structure (Register - Host to Device).
554 *
555 * LOCKING:
556 * Inherited from caller.
557 */
558
559void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp)
560{
561 fis[0] = 0x27; /* Register - Host to Device FIS */
562 fis[1] = (pmp & 0xf) | (1 << 7); /* Port multiplier number,
563 bit 7 indicates Command FIS */
564 fis[2] = tf->command;
565 fis[3] = tf->feature;
566
567 fis[4] = tf->lbal;
568 fis[5] = tf->lbam;
569 fis[6] = tf->lbah;
570 fis[7] = tf->device;
571
572 fis[8] = tf->hob_lbal;
573 fis[9] = tf->hob_lbam;
574 fis[10] = tf->hob_lbah;
575 fis[11] = tf->hob_feature;
576
577 fis[12] = tf->nsect;
578 fis[13] = tf->hob_nsect;
579 fis[14] = 0;
580 fis[15] = tf->ctl;
581
582 fis[16] = 0;
583 fis[17] = 0;
584 fis[18] = 0;
585 fis[19] = 0;
586}
587
588/**
589 * ata_tf_from_fis - Convert SATA FIS to ATA taskfile
590 * @fis: Buffer from which data will be input
591 * @tf: Taskfile to output
592 *
593 * Converts a standard ATA taskfile to a Serial ATA
594 * FIS structure (Register - Host to Device).
595 *
596 * LOCKING:
597 * Inherited from caller.
598 */
599
600void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf)
601{
602 tf->command = fis[2]; /* status */
603 tf->feature = fis[3]; /* error */
604
605 tf->lbal = fis[4];
606 tf->lbam = fis[5];
607 tf->lbah = fis[6];
608 tf->device = fis[7];
609
610 tf->hob_lbal = fis[8];
611 tf->hob_lbam = fis[9];
612 tf->hob_lbah = fis[10];
613
614 tf->nsect = fis[12];
615 tf->hob_nsect = fis[13];
616}
617
618/**
619 * ata_prot_to_cmd - determine which read/write opcodes to use
620 * @protocol: ATA_PROT_xxx taskfile protocol
621 * @lba48: true is lba48 is present
622 *
623 * Given necessary input, determine which read/write commands
624 * to use to transfer data.
625 *
626 * LOCKING:
627 * None.
628 */
629static int ata_prot_to_cmd(int protocol, int lba48)
630{
631 int rcmd = 0, wcmd = 0;
632
633 switch (protocol) {
634 case ATA_PROT_PIO:
635 if (lba48) {
636 rcmd = ATA_CMD_PIO_READ_EXT;
637 wcmd = ATA_CMD_PIO_WRITE_EXT;
638 } else {
639 rcmd = ATA_CMD_PIO_READ;
640 wcmd = ATA_CMD_PIO_WRITE;
641 }
642 break;
643
644 case ATA_PROT_DMA:
645 if (lba48) {
646 rcmd = ATA_CMD_READ_EXT;
647 wcmd = ATA_CMD_WRITE_EXT;
648 } else {
649 rcmd = ATA_CMD_READ;
650 wcmd = ATA_CMD_WRITE;
651 }
652 break;
653
654 default:
655 return -1;
656 }
657
658 return rcmd | (wcmd << 8);
659}
660
661/**
662 * ata_dev_set_protocol - set taskfile protocol and r/w commands
663 * @dev: device to examine and configure
664 *
665 * Examine the device configuration, after we have
666 * read the identify-device page and configured the
667 * data transfer mode. Set internal state related to
668 * the ATA taskfile protocol (pio, pio mult, dma, etc.)
669 * and calculate the proper read/write commands to use.
670 *
671 * LOCKING:
672 * caller.
673 */
674static void ata_dev_set_protocol(struct ata_device *dev)
675{
676 int pio = (dev->flags & ATA_DFLAG_PIO);
677 int lba48 = (dev->flags & ATA_DFLAG_LBA48);
678 int proto, cmd;
679
680 if (pio)
681 proto = dev->xfer_protocol = ATA_PROT_PIO;
682 else
683 proto = dev->xfer_protocol = ATA_PROT_DMA;
684
685 cmd = ata_prot_to_cmd(proto, lba48);
686 if (cmd < 0)
687 BUG();
688
689 dev->read_cmd = cmd & 0xff;
690 dev->write_cmd = (cmd >> 8) & 0xff;
691}
692
693static const char * xfer_mode_str[] = {
694 "UDMA/16",
695 "UDMA/25",
696 "UDMA/33",
697 "UDMA/44",
698 "UDMA/66",
699 "UDMA/100",
700 "UDMA/133",
701 "UDMA7",
702 "MWDMA0",
703 "MWDMA1",
704 "MWDMA2",
705 "PIO0",
706 "PIO1",
707 "PIO2",
708 "PIO3",
709 "PIO4",
710};
711
712/**
713 * ata_udma_string - convert UDMA bit offset to string
714 * @mask: mask of bits supported; only highest bit counts.
715 *
716 * Determine string which represents the highest speed
717 * (highest bit in @udma_mask).
718 *
719 * LOCKING:
720 * None.
721 *
722 * RETURNS:
723 * Constant C string representing highest speed listed in
724 * @udma_mask, or the constant C string "<n/a>".
725 */
726
727static const char *ata_mode_string(unsigned int mask)
728{
729 int i;
730
731 for (i = 7; i >= 0; i--)
732 if (mask & (1 << i))
733 goto out;
734 for (i = ATA_SHIFT_MWDMA + 2; i >= ATA_SHIFT_MWDMA; i--)
735 if (mask & (1 << i))
736 goto out;
737 for (i = ATA_SHIFT_PIO + 4; i >= ATA_SHIFT_PIO; i--)
738 if (mask & (1 << i))
739 goto out;
740
741 return "<n/a>";
742
743out:
744 return xfer_mode_str[i];
745}
746
747/**
748 * ata_pio_devchk - PATA device presence detection
749 * @ap: ATA channel to examine
750 * @device: Device to examine (starting at zero)
751 *
752 * This technique was originally described in
753 * Hale Landis's ATADRVR (www.ata-atapi.com), and
754 * later found its way into the ATA/ATAPI spec.
755 *
756 * Write a pattern to the ATA shadow registers,
757 * and if a device is present, it will respond by
758 * correctly storing and echoing back the
759 * ATA shadow register contents.
760 *
761 * LOCKING:
762 * caller.
763 */
764
765static unsigned int ata_pio_devchk(struct ata_port *ap,
766 unsigned int device)
767{
768 struct ata_ioports *ioaddr = &ap->ioaddr;
769 u8 nsect, lbal;
770
771 ap->ops->dev_select(ap, device);
772
773 outb(0x55, ioaddr->nsect_addr);
774 outb(0xaa, ioaddr->lbal_addr);
775
776 outb(0xaa, ioaddr->nsect_addr);
777 outb(0x55, ioaddr->lbal_addr);
778
779 outb(0x55, ioaddr->nsect_addr);
780 outb(0xaa, ioaddr->lbal_addr);
781
782 nsect = inb(ioaddr->nsect_addr);
783 lbal = inb(ioaddr->lbal_addr);
784
785 if ((nsect == 0x55) && (lbal == 0xaa))
786 return 1; /* we found a device */
787
788 return 0; /* nothing found */
789}
790
791/**
792 * ata_mmio_devchk - PATA device presence detection
793 * @ap: ATA channel to examine
794 * @device: Device to examine (starting at zero)
795 *
796 * This technique was originally described in
797 * Hale Landis's ATADRVR (www.ata-atapi.com), and
798 * later found its way into the ATA/ATAPI spec.
799 *
800 * Write a pattern to the ATA shadow registers,
801 * and if a device is present, it will respond by
802 * correctly storing and echoing back the
803 * ATA shadow register contents.
804 *
805 * LOCKING:
806 * caller.
807 */
808
809static unsigned int ata_mmio_devchk(struct ata_port *ap,
810 unsigned int device)
811{
812 struct ata_ioports *ioaddr = &ap->ioaddr;
813 u8 nsect, lbal;
814
815 ap->ops->dev_select(ap, device);
816
817 writeb(0x55, (void __iomem *) ioaddr->nsect_addr);
818 writeb(0xaa, (void __iomem *) ioaddr->lbal_addr);
819
820 writeb(0xaa, (void __iomem *) ioaddr->nsect_addr);
821 writeb(0x55, (void __iomem *) ioaddr->lbal_addr);
822
823 writeb(0x55, (void __iomem *) ioaddr->nsect_addr);
824 writeb(0xaa, (void __iomem *) ioaddr->lbal_addr);
825
826 nsect = readb((void __iomem *) ioaddr->nsect_addr);
827 lbal = readb((void __iomem *) ioaddr->lbal_addr);
828
829 if ((nsect == 0x55) && (lbal == 0xaa))
830 return 1; /* we found a device */
831
832 return 0; /* nothing found */
833}
834
835/**
836 * ata_devchk - PATA device presence detection
837 * @ap: ATA channel to examine
838 * @device: Device to examine (starting at zero)
839 *
840 * Dispatch ATA device presence detection, depending
841 * on whether we are using PIO or MMIO to talk to the
842 * ATA shadow registers.
843 *
844 * LOCKING:
845 * caller.
846 */
847
848static unsigned int ata_devchk(struct ata_port *ap,
849 unsigned int device)
850{
851 if (ap->flags & ATA_FLAG_MMIO)
852 return ata_mmio_devchk(ap, device);
853 return ata_pio_devchk(ap, device);
854}
855
856/**
857 * ata_dev_classify - determine device type based on ATA-spec signature
858 * @tf: ATA taskfile register set for device to be identified
859 *
860 * Determine from taskfile register contents whether a device is
861 * ATA or ATAPI, as per "Signature and persistence" section
862 * of ATA/PI spec (volume 1, sect 5.14).
863 *
864 * LOCKING:
865 * None.
866 *
867 * RETURNS:
868 * Device type, %ATA_DEV_ATA, %ATA_DEV_ATAPI, or %ATA_DEV_UNKNOWN
869 * the event of failure.
870 */
871
872unsigned int ata_dev_classify(struct ata_taskfile *tf)
873{
874 /* Apple's open source Darwin code hints that some devices only
875 * put a proper signature into the LBA mid/high registers,
876 * So, we only check those. It's sufficient for uniqueness.
877 */
878
879 if (((tf->lbam == 0) && (tf->lbah == 0)) ||
880 ((tf->lbam == 0x3c) && (tf->lbah == 0xc3))) {
881 DPRINTK("found ATA device by sig\n");
882 return ATA_DEV_ATA;
883 }
884
885 if (((tf->lbam == 0x14) && (tf->lbah == 0xeb)) ||
886 ((tf->lbam == 0x69) && (tf->lbah == 0x96))) {
887 DPRINTK("found ATAPI device by sig\n");
888 return ATA_DEV_ATAPI;
889 }
890
891 DPRINTK("unknown device\n");
892 return ATA_DEV_UNKNOWN;
893}
894
895/**
896 * ata_dev_try_classify - Parse returned ATA device signature
897 * @ap: ATA channel to examine
898 * @device: Device to examine (starting at zero)
899 *
900 * After an event -- SRST, E.D.D., or SATA COMRESET -- occurs,
901 * an ATA/ATAPI-defined set of values is placed in the ATA
902 * shadow registers, indicating the results of device detection
903 * and diagnostics.
904 *
905 * Select the ATA device, and read the values from the ATA shadow
906 * registers. Then parse according to the Error register value,
907 * and the spec-defined values examined by ata_dev_classify().
908 *
909 * LOCKING:
910 * caller.
911 */
912
913static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device)
914{
915 struct ata_device *dev = &ap->device[device];
916 struct ata_taskfile tf;
917 unsigned int class;
918 u8 err;
919
920 ap->ops->dev_select(ap, device);
921
922 memset(&tf, 0, sizeof(tf));
923
924 err = ata_chk_err(ap);
925 ap->ops->tf_read(ap, &tf);
926
927 dev->class = ATA_DEV_NONE;
928
929 /* see if device passed diags */
930 if (err == 1)
931 /* do nothing */ ;
932 else if ((device == 0) && (err == 0x81))
933 /* do nothing */ ;
934 else
935 return err;
936
937 /* determine if device if ATA or ATAPI */
938 class = ata_dev_classify(&tf);
939 if (class == ATA_DEV_UNKNOWN)
940 return err;
941 if ((class == ATA_DEV_ATA) && (ata_chk_status(ap) == 0))
942 return err;
943
944 dev->class = class;
945
946 return err;
947}
948
949/**
950 * ata_dev_id_string - Convert IDENTIFY DEVICE page into string
951 * @id: IDENTIFY DEVICE results we will examine
952 * @s: string into which data is output
953 * @ofs: offset into identify device page
954 * @len: length of string to return. must be an even number.
955 *
956 * The strings in the IDENTIFY DEVICE page are broken up into
957 * 16-bit chunks. Run through the string, and output each
958 * 8-bit chunk linearly, regardless of platform.
959 *
960 * LOCKING:
961 * caller.
962 */
963
964void ata_dev_id_string(u16 *id, unsigned char *s,
965 unsigned int ofs, unsigned int len)
966{
967 unsigned int c;
968
969 while (len > 0) {
970 c = id[ofs] >> 8;
971 *s = c;
972 s++;
973
974 c = id[ofs] & 0xff;
975 *s = c;
976 s++;
977
978 ofs++;
979 len -= 2;
980 }
981}
982
Edward Falk0baab862005-06-02 18:17:13 -0400983
984/**
985 * ata_noop_dev_select - Select device 0/1 on ATA bus
986 * @ap: ATA channel to manipulate
987 * @device: ATA device (numbered from zero) to select
988 *
989 * This function performs no actual function.
990 *
991 * May be used as the dev_select() entry in ata_port_operations.
992 *
993 * LOCKING:
994 * caller.
995 */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700996void ata_noop_dev_select (struct ata_port *ap, unsigned int device)
997{
998}
999
Edward Falk0baab862005-06-02 18:17:13 -04001000
Linus Torvalds1da177e2005-04-16 15:20:36 -07001001/**
1002 * ata_std_dev_select - Select device 0/1 on ATA bus
1003 * @ap: ATA channel to manipulate
1004 * @device: ATA device (numbered from zero) to select
1005 *
1006 * Use the method defined in the ATA specification to
1007 * make either device 0, or device 1, active on the
Edward Falk0baab862005-06-02 18:17:13 -04001008 * ATA channel. Works with both PIO and MMIO.
1009 *
1010 * May be used as the dev_select() entry in ata_port_operations.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001011 *
1012 * LOCKING:
1013 * caller.
1014 */
1015
1016void ata_std_dev_select (struct ata_port *ap, unsigned int device)
1017{
1018 u8 tmp;
1019
1020 if (device == 0)
1021 tmp = ATA_DEVICE_OBS;
1022 else
1023 tmp = ATA_DEVICE_OBS | ATA_DEV1;
1024
1025 if (ap->flags & ATA_FLAG_MMIO) {
1026 writeb(tmp, (void __iomem *) ap->ioaddr.device_addr);
1027 } else {
1028 outb(tmp, ap->ioaddr.device_addr);
1029 }
1030 ata_pause(ap); /* needed; also flushes, for mmio */
1031}
1032
1033/**
1034 * ata_dev_select - Select device 0/1 on ATA bus
1035 * @ap: ATA channel to manipulate
1036 * @device: ATA device (numbered from zero) to select
1037 * @wait: non-zero to wait for Status register BSY bit to clear
1038 * @can_sleep: non-zero if context allows sleeping
1039 *
1040 * Use the method defined in the ATA specification to
1041 * make either device 0, or device 1, active on the
1042 * ATA channel.
1043 *
1044 * This is a high-level version of ata_std_dev_select(),
1045 * which additionally provides the services of inserting
1046 * the proper pauses and status polling, where needed.
1047 *
1048 * LOCKING:
1049 * caller.
1050 */
1051
1052void ata_dev_select(struct ata_port *ap, unsigned int device,
1053 unsigned int wait, unsigned int can_sleep)
1054{
1055 VPRINTK("ENTER, ata%u: device %u, wait %u\n",
1056 ap->id, device, wait);
1057
1058 if (wait)
1059 ata_wait_idle(ap);
1060
1061 ap->ops->dev_select(ap, device);
1062
1063 if (wait) {
1064 if (can_sleep && ap->device[device].class == ATA_DEV_ATAPI)
1065 msleep(150);
1066 ata_wait_idle(ap);
1067 }
1068}
1069
1070/**
1071 * ata_dump_id - IDENTIFY DEVICE info debugging output
1072 * @dev: Device whose IDENTIFY DEVICE page we will dump
1073 *
1074 * Dump selected 16-bit words from a detected device's
1075 * IDENTIFY PAGE page.
1076 *
1077 * LOCKING:
1078 * caller.
1079 */
1080
1081static inline void ata_dump_id(struct ata_device *dev)
1082{
1083 DPRINTK("49==0x%04x "
1084 "53==0x%04x "
1085 "63==0x%04x "
1086 "64==0x%04x "
1087 "75==0x%04x \n",
1088 dev->id[49],
1089 dev->id[53],
1090 dev->id[63],
1091 dev->id[64],
1092 dev->id[75]);
1093 DPRINTK("80==0x%04x "
1094 "81==0x%04x "
1095 "82==0x%04x "
1096 "83==0x%04x "
1097 "84==0x%04x \n",
1098 dev->id[80],
1099 dev->id[81],
1100 dev->id[82],
1101 dev->id[83],
1102 dev->id[84]);
1103 DPRINTK("88==0x%04x "
1104 "93==0x%04x\n",
1105 dev->id[88],
1106 dev->id[93]);
1107}
1108
1109/**
1110 * ata_dev_identify - obtain IDENTIFY x DEVICE page
1111 * @ap: port on which device we wish to probe resides
1112 * @device: device bus address, starting at zero
1113 *
1114 * Following bus reset, we issue the IDENTIFY [PACKET] DEVICE
1115 * command, and read back the 512-byte device information page.
1116 * The device information page is fed to us via the standard
1117 * PIO-IN protocol, but we hand-code it here. (TODO: investigate
1118 * using standard PIO-IN paths)
1119 *
1120 * After reading the device information page, we use several
1121 * bits of information from it to initialize data structures
1122 * that will be used during the lifetime of the ata_device.
1123 * Other data from the info page is used to disqualify certain
1124 * older ATA devices we do not wish to support.
1125 *
1126 * LOCKING:
1127 * Inherited from caller. Some functions called by this function
1128 * obtain the host_set lock.
1129 */
1130
1131static void ata_dev_identify(struct ata_port *ap, unsigned int device)
1132{
1133 struct ata_device *dev = &ap->device[device];
1134 unsigned int i;
1135 u16 tmp;
1136 unsigned long xfer_modes;
1137 u8 status;
1138 unsigned int using_edd;
1139 DECLARE_COMPLETION(wait);
1140 struct ata_queued_cmd *qc;
1141 unsigned long flags;
1142 int rc;
1143
1144 if (!ata_dev_present(dev)) {
1145 DPRINTK("ENTER/EXIT (host %u, dev %u) -- nodev\n",
1146 ap->id, device);
1147 return;
1148 }
1149
1150 if (ap->flags & (ATA_FLAG_SRST | ATA_FLAG_SATA_RESET))
1151 using_edd = 0;
1152 else
1153 using_edd = 1;
1154
1155 DPRINTK("ENTER, host %u, dev %u\n", ap->id, device);
1156
1157 assert (dev->class == ATA_DEV_ATA || dev->class == ATA_DEV_ATAPI ||
1158 dev->class == ATA_DEV_NONE);
1159
1160 ata_dev_select(ap, device, 1, 1); /* select device 0/1 */
1161
1162 qc = ata_qc_new_init(ap, dev);
1163 BUG_ON(qc == NULL);
1164
1165 ata_sg_init_one(qc, dev->id, sizeof(dev->id));
1166 qc->dma_dir = DMA_FROM_DEVICE;
1167 qc->tf.protocol = ATA_PROT_PIO;
1168 qc->nsect = 1;
1169
1170retry:
1171 if (dev->class == ATA_DEV_ATA) {
1172 qc->tf.command = ATA_CMD_ID_ATA;
1173 DPRINTK("do ATA identify\n");
1174 } else {
1175 qc->tf.command = ATA_CMD_ID_ATAPI;
1176 DPRINTK("do ATAPI identify\n");
1177 }
1178
1179 qc->waiting = &wait;
1180 qc->complete_fn = ata_qc_complete_noop;
1181
1182 spin_lock_irqsave(&ap->host_set->lock, flags);
1183 rc = ata_qc_issue(qc);
1184 spin_unlock_irqrestore(&ap->host_set->lock, flags);
1185
1186 if (rc)
1187 goto err_out;
1188 else
1189 wait_for_completion(&wait);
1190
1191 status = ata_chk_status(ap);
1192 if (status & ATA_ERR) {
1193 /*
1194 * arg! EDD works for all test cases, but seems to return
1195 * the ATA signature for some ATAPI devices. Until the
1196 * reason for this is found and fixed, we fix up the mess
1197 * here. If IDENTIFY DEVICE returns command aborted
1198 * (as ATAPI devices do), then we issue an
1199 * IDENTIFY PACKET DEVICE.
1200 *
1201 * ATA software reset (SRST, the default) does not appear
1202 * to have this problem.
1203 */
1204 if ((using_edd) && (qc->tf.command == ATA_CMD_ID_ATA)) {
1205 u8 err = ata_chk_err(ap);
1206 if (err & ATA_ABORTED) {
1207 dev->class = ATA_DEV_ATAPI;
1208 qc->cursg = 0;
1209 qc->cursg_ofs = 0;
1210 qc->cursect = 0;
1211 qc->nsect = 1;
1212 goto retry;
1213 }
1214 }
1215 goto err_out;
1216 }
1217
1218 swap_buf_le16(dev->id, ATA_ID_WORDS);
1219
1220 /* print device capabilities */
1221 printk(KERN_DEBUG "ata%u: dev %u cfg "
1222 "49:%04x 82:%04x 83:%04x 84:%04x 85:%04x 86:%04x 87:%04x 88:%04x\n",
1223 ap->id, device, dev->id[49],
1224 dev->id[82], dev->id[83], dev->id[84],
1225 dev->id[85], dev->id[86], dev->id[87],
1226 dev->id[88]);
1227
1228 /*
1229 * common ATA, ATAPI feature tests
1230 */
1231
1232 /* we require LBA and DMA support (bits 8 & 9 of word 49) */
1233 if (!ata_id_has_dma(dev->id) || !ata_id_has_lba(dev->id)) {
1234 printk(KERN_DEBUG "ata%u: no dma/lba\n", ap->id);
1235 goto err_out_nosup;
1236 }
1237
1238 /* quick-n-dirty find max transfer mode; for printk only */
1239 xfer_modes = dev->id[ATA_ID_UDMA_MODES];
1240 if (!xfer_modes)
1241 xfer_modes = (dev->id[ATA_ID_MWDMA_MODES]) << ATA_SHIFT_MWDMA;
1242 if (!xfer_modes) {
1243 xfer_modes = (dev->id[ATA_ID_PIO_MODES]) << (ATA_SHIFT_PIO + 3);
1244 xfer_modes |= (0x7 << ATA_SHIFT_PIO);
1245 }
1246
1247 ata_dump_id(dev);
1248
1249 /* ATA-specific feature tests */
1250 if (dev->class == ATA_DEV_ATA) {
1251 if (!ata_id_is_ata(dev->id)) /* sanity check */
1252 goto err_out_nosup;
1253
1254 tmp = dev->id[ATA_ID_MAJOR_VER];
1255 for (i = 14; i >= 1; i--)
1256 if (tmp & (1 << i))
1257 break;
1258
1259 /* we require at least ATA-3 */
1260 if (i < 3) {
1261 printk(KERN_DEBUG "ata%u: no ATA-3\n", ap->id);
1262 goto err_out_nosup;
1263 }
1264
1265 if (ata_id_has_lba48(dev->id)) {
1266 dev->flags |= ATA_DFLAG_LBA48;
1267 dev->n_sectors = ata_id_u64(dev->id, 100);
1268 } else {
1269 dev->n_sectors = ata_id_u32(dev->id, 60);
1270 }
1271
1272 ap->host->max_cmd_len = 16;
1273
1274 /* print device info to dmesg */
1275 printk(KERN_INFO "ata%u: dev %u ATA, max %s, %Lu sectors:%s\n",
1276 ap->id, device,
1277 ata_mode_string(xfer_modes),
1278 (unsigned long long)dev->n_sectors,
1279 dev->flags & ATA_DFLAG_LBA48 ? " lba48" : "");
1280 }
1281
1282 /* ATAPI-specific feature tests */
1283 else {
1284 if (ata_id_is_ata(dev->id)) /* sanity check */
1285 goto err_out_nosup;
1286
1287 rc = atapi_cdb_len(dev->id);
1288 if ((rc < 12) || (rc > ATAPI_CDB_LEN)) {
1289 printk(KERN_WARNING "ata%u: unsupported CDB len\n", ap->id);
1290 goto err_out_nosup;
1291 }
1292 ap->cdb_len = (unsigned int) rc;
1293 ap->host->max_cmd_len = (unsigned char) ap->cdb_len;
1294
1295 /* print device info to dmesg */
1296 printk(KERN_INFO "ata%u: dev %u ATAPI, max %s\n",
1297 ap->id, device,
1298 ata_mode_string(xfer_modes));
1299 }
1300
1301 DPRINTK("EXIT, drv_stat = 0x%x\n", ata_chk_status(ap));
1302 return;
1303
1304err_out_nosup:
1305 printk(KERN_WARNING "ata%u: dev %u not supported, ignoring\n",
1306 ap->id, device);
1307err_out:
1308 dev->class++; /* converts ATA_DEV_xxx into ATA_DEV_xxx_UNSUP */
1309 DPRINTK("EXIT, err\n");
1310}
1311
Brad Campbell6f2f3812005-05-12 15:07:47 -04001312
1313static inline u8 ata_dev_knobble(struct ata_port *ap)
1314{
1315 return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(ap->device->id)));
1316}
1317
1318/**
1319 * ata_dev_config - Run device specific handlers and check for
1320 * SATA->PATA bridges
Jeff Garzik8a60a072005-07-31 13:13:24 -04001321 * @ap: Bus
Brad Campbell6f2f3812005-05-12 15:07:47 -04001322 * @i: Device
1323 *
1324 * LOCKING:
1325 */
Jeff Garzik8a60a072005-07-31 13:13:24 -04001326
Brad Campbell6f2f3812005-05-12 15:07:47 -04001327void ata_dev_config(struct ata_port *ap, unsigned int i)
1328{
1329 /* limit bridge transfers to udma5, 200 sectors */
1330 if (ata_dev_knobble(ap)) {
1331 printk(KERN_INFO "ata%u(%u): applying bridge limits\n",
1332 ap->id, ap->device->devno);
1333 ap->udma_mask &= ATA_UDMA5;
1334 ap->host->max_sectors = ATA_MAX_SECTORS;
1335 ap->host->hostt->max_sectors = ATA_MAX_SECTORS;
1336 ap->device->flags |= ATA_DFLAG_LOCK_SECTORS;
1337 }
1338
1339 if (ap->ops->dev_config)
1340 ap->ops->dev_config(ap, &ap->device[i]);
1341}
1342
Linus Torvalds1da177e2005-04-16 15:20:36 -07001343/**
1344 * ata_bus_probe - Reset and probe ATA bus
1345 * @ap: Bus to probe
1346 *
Jeff Garzik0cba6322005-05-30 19:49:12 -04001347 * Master ATA bus probing function. Initiates a hardware-dependent
1348 * bus reset, then attempts to identify any devices found on
1349 * the bus.
1350 *
Linus Torvalds1da177e2005-04-16 15:20:36 -07001351 * LOCKING:
Jeff Garzik0cba6322005-05-30 19:49:12 -04001352 * PCI/etc. bus probe sem.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001353 *
1354 * RETURNS:
1355 * Zero on success, non-zero on error.
1356 */
1357
1358static int ata_bus_probe(struct ata_port *ap)
1359{
1360 unsigned int i, found = 0;
1361
1362 ap->ops->phy_reset(ap);
1363 if (ap->flags & ATA_FLAG_PORT_DISABLED)
1364 goto err_out;
1365
1366 for (i = 0; i < ATA_MAX_DEVICES; i++) {
1367 ata_dev_identify(ap, i);
1368 if (ata_dev_present(&ap->device[i])) {
1369 found = 1;
Brad Campbell6f2f3812005-05-12 15:07:47 -04001370 ata_dev_config(ap,i);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001371 }
1372 }
1373
1374 if ((!found) || (ap->flags & ATA_FLAG_PORT_DISABLED))
1375 goto err_out_disable;
1376
1377 ata_set_mode(ap);
1378 if (ap->flags & ATA_FLAG_PORT_DISABLED)
1379 goto err_out_disable;
1380
1381 return 0;
1382
1383err_out_disable:
1384 ap->ops->port_disable(ap);
1385err_out:
1386 return -1;
1387}
1388
1389/**
Jeff Garzik0cba6322005-05-30 19:49:12 -04001390 * ata_port_probe - Mark port as enabled
1391 * @ap: Port for which we indicate enablement
Linus Torvalds1da177e2005-04-16 15:20:36 -07001392 *
Jeff Garzik0cba6322005-05-30 19:49:12 -04001393 * Modify @ap data structure such that the system
1394 * thinks that the entire port is enabled.
1395 *
1396 * LOCKING: host_set lock, or some other form of
1397 * serialization.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001398 */
1399
1400void ata_port_probe(struct ata_port *ap)
1401{
1402 ap->flags &= ~ATA_FLAG_PORT_DISABLED;
1403}
1404
1405/**
Jeff Garzik780a87f2005-05-30 15:41:05 -04001406 * __sata_phy_reset - Wake/reset a low-level SATA PHY
1407 * @ap: SATA port associated with target SATA PHY.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001408 *
Jeff Garzik780a87f2005-05-30 15:41:05 -04001409 * This function issues commands to standard SATA Sxxx
1410 * PHY registers, to wake up the phy (and device), and
1411 * clear any reset condition.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001412 *
1413 * LOCKING:
Jeff Garzik0cba6322005-05-30 19:49:12 -04001414 * PCI/etc. bus probe sem.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001415 *
1416 */
1417void __sata_phy_reset(struct ata_port *ap)
1418{
1419 u32 sstatus;
1420 unsigned long timeout = jiffies + (HZ * 5);
1421
1422 if (ap->flags & ATA_FLAG_SATA_RESET) {
Brett Russcdcca892005-03-28 15:10:27 -05001423 /* issue phy wake/reset */
1424 scr_write_flush(ap, SCR_CONTROL, 0x301);
Tejun Heo62ba2842005-06-26 23:27:19 +09001425 /* Couldn't find anything in SATA I/II specs, but
1426 * AHCI-1.1 10.4.2 says at least 1 ms. */
1427 mdelay(1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001428 }
Brett Russcdcca892005-03-28 15:10:27 -05001429 scr_write_flush(ap, SCR_CONTROL, 0x300); /* phy wake/clear reset */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001430
1431 /* wait for phy to become ready, if necessary */
1432 do {
1433 msleep(200);
1434 sstatus = scr_read(ap, SCR_STATUS);
1435 if ((sstatus & 0xf) != 1)
1436 break;
1437 } while (time_before(jiffies, timeout));
1438
1439 /* TODO: phy layer with polling, timeouts, etc. */
1440 if (sata_dev_present(ap))
1441 ata_port_probe(ap);
1442 else {
1443 sstatus = scr_read(ap, SCR_STATUS);
1444 printk(KERN_INFO "ata%u: no device found (phy stat %08x)\n",
1445 ap->id, sstatus);
1446 ata_port_disable(ap);
1447 }
1448
1449 if (ap->flags & ATA_FLAG_PORT_DISABLED)
1450 return;
1451
1452 if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
1453 ata_port_disable(ap);
1454 return;
1455 }
1456
1457 ap->cbl = ATA_CBL_SATA;
1458}
1459
1460/**
Jeff Garzik780a87f2005-05-30 15:41:05 -04001461 * sata_phy_reset - Reset SATA bus.
1462 * @ap: SATA port associated with target SATA PHY.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001463 *
Jeff Garzik780a87f2005-05-30 15:41:05 -04001464 * This function resets the SATA bus, and then probes
1465 * the bus for devices.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001466 *
1467 * LOCKING:
Jeff Garzik0cba6322005-05-30 19:49:12 -04001468 * PCI/etc. bus probe sem.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001469 *
1470 */
1471void sata_phy_reset(struct ata_port *ap)
1472{
1473 __sata_phy_reset(ap);
1474 if (ap->flags & ATA_FLAG_PORT_DISABLED)
1475 return;
1476 ata_bus_reset(ap);
1477}
1478
1479/**
Jeff Garzik780a87f2005-05-30 15:41:05 -04001480 * ata_port_disable - Disable port.
1481 * @ap: Port to be disabled.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001482 *
Jeff Garzik780a87f2005-05-30 15:41:05 -04001483 * Modify @ap data structure such that the system
1484 * thinks that the entire port is disabled, and should
1485 * never attempt to probe or communicate with devices
1486 * on this port.
1487 *
1488 * LOCKING: host_set lock, or some other form of
1489 * serialization.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001490 */
1491
1492void ata_port_disable(struct ata_port *ap)
1493{
1494 ap->device[0].class = ATA_DEV_NONE;
1495 ap->device[1].class = ATA_DEV_NONE;
1496 ap->flags |= ATA_FLAG_PORT_DISABLED;
1497}
1498
1499static struct {
1500 unsigned int shift;
1501 u8 base;
1502} xfer_mode_classes[] = {
1503 { ATA_SHIFT_UDMA, XFER_UDMA_0 },
1504 { ATA_SHIFT_MWDMA, XFER_MW_DMA_0 },
1505 { ATA_SHIFT_PIO, XFER_PIO_0 },
1506};
1507
1508static inline u8 base_from_shift(unsigned int shift)
1509{
1510 int i;
1511
1512 for (i = 0; i < ARRAY_SIZE(xfer_mode_classes); i++)
1513 if (xfer_mode_classes[i].shift == shift)
1514 return xfer_mode_classes[i].base;
1515
1516 return 0xff;
1517}
1518
1519static void ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev)
1520{
1521 int ofs, idx;
1522 u8 base;
1523
1524 if (!ata_dev_present(dev) || (ap->flags & ATA_FLAG_PORT_DISABLED))
1525 return;
1526
1527 if (dev->xfer_shift == ATA_SHIFT_PIO)
1528 dev->flags |= ATA_DFLAG_PIO;
1529
1530 ata_dev_set_xfermode(ap, dev);
1531
1532 base = base_from_shift(dev->xfer_shift);
1533 ofs = dev->xfer_mode - base;
1534 idx = ofs + dev->xfer_shift;
1535 WARN_ON(idx >= ARRAY_SIZE(xfer_mode_str));
1536
1537 DPRINTK("idx=%d xfer_shift=%u, xfer_mode=0x%x, base=0x%x, offset=%d\n",
1538 idx, dev->xfer_shift, (int)dev->xfer_mode, (int)base, ofs);
1539
1540 printk(KERN_INFO "ata%u: dev %u configured for %s\n",
1541 ap->id, dev->devno, xfer_mode_str[idx]);
1542}
1543
1544static int ata_host_set_pio(struct ata_port *ap)
1545{
1546 unsigned int mask;
1547 int x, i;
1548 u8 base, xfer_mode;
1549
1550 mask = ata_get_mode_mask(ap, ATA_SHIFT_PIO);
1551 x = fgb(mask);
1552 if (x < 0) {
1553 printk(KERN_WARNING "ata%u: no PIO support\n", ap->id);
1554 return -1;
1555 }
1556
1557 base = base_from_shift(ATA_SHIFT_PIO);
1558 xfer_mode = base + x;
1559
1560 DPRINTK("base 0x%x xfer_mode 0x%x mask 0x%x x %d\n",
1561 (int)base, (int)xfer_mode, mask, x);
1562
1563 for (i = 0; i < ATA_MAX_DEVICES; i++) {
1564 struct ata_device *dev = &ap->device[i];
1565 if (ata_dev_present(dev)) {
1566 dev->pio_mode = xfer_mode;
1567 dev->xfer_mode = xfer_mode;
1568 dev->xfer_shift = ATA_SHIFT_PIO;
1569 if (ap->ops->set_piomode)
1570 ap->ops->set_piomode(ap, dev);
1571 }
1572 }
1573
1574 return 0;
1575}
1576
1577static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode,
1578 unsigned int xfer_shift)
1579{
1580 int i;
1581
1582 for (i = 0; i < ATA_MAX_DEVICES; i++) {
1583 struct ata_device *dev = &ap->device[i];
1584 if (ata_dev_present(dev)) {
1585 dev->dma_mode = xfer_mode;
1586 dev->xfer_mode = xfer_mode;
1587 dev->xfer_shift = xfer_shift;
1588 if (ap->ops->set_dmamode)
1589 ap->ops->set_dmamode(ap, dev);
1590 }
1591 }
1592}
1593
1594/**
1595 * ata_set_mode - Program timings and issue SET FEATURES - XFER
1596 * @ap: port on which timings will be programmed
1597 *
Jeff Garzik780a87f2005-05-30 15:41:05 -04001598 * Set ATA device disk transfer mode (PIO3, UDMA6, etc.).
1599 *
Linus Torvalds1da177e2005-04-16 15:20:36 -07001600 * LOCKING:
Jeff Garzik0cba6322005-05-30 19:49:12 -04001601 * PCI/etc. bus probe sem.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001602 *
1603 */
1604static void ata_set_mode(struct ata_port *ap)
1605{
1606 unsigned int i, xfer_shift;
1607 u8 xfer_mode;
1608 int rc;
1609
1610 /* step 1: always set host PIO timings */
1611 rc = ata_host_set_pio(ap);
1612 if (rc)
1613 goto err_out;
1614
1615 /* step 2: choose the best data xfer mode */
1616 xfer_mode = xfer_shift = 0;
1617 rc = ata_choose_xfer_mode(ap, &xfer_mode, &xfer_shift);
1618 if (rc)
1619 goto err_out;
1620
1621 /* step 3: if that xfer mode isn't PIO, set host DMA timings */
1622 if (xfer_shift != ATA_SHIFT_PIO)
1623 ata_host_set_dma(ap, xfer_mode, xfer_shift);
1624
1625 /* step 4: update devices' xfer mode */
1626 ata_dev_set_mode(ap, &ap->device[0]);
1627 ata_dev_set_mode(ap, &ap->device[1]);
1628
1629 if (ap->flags & ATA_FLAG_PORT_DISABLED)
1630 return;
1631
1632 if (ap->ops->post_set_mode)
1633 ap->ops->post_set_mode(ap);
1634
1635 for (i = 0; i < 2; i++) {
1636 struct ata_device *dev = &ap->device[i];
1637 ata_dev_set_protocol(dev);
1638 }
1639
1640 return;
1641
1642err_out:
1643 ata_port_disable(ap);
1644}
1645
1646/**
1647 * ata_busy_sleep - sleep until BSY clears, or timeout
1648 * @ap: port containing status register to be polled
1649 * @tmout_pat: impatience timeout
1650 * @tmout: overall timeout
1651 *
Jeff Garzik780a87f2005-05-30 15:41:05 -04001652 * Sleep until ATA Status register bit BSY clears,
1653 * or a timeout occurs.
1654 *
1655 * LOCKING: None.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001656 *
1657 */
1658
1659static unsigned int ata_busy_sleep (struct ata_port *ap,
1660 unsigned long tmout_pat,
1661 unsigned long tmout)
1662{
1663 unsigned long timer_start, timeout;
1664 u8 status;
1665
1666 status = ata_busy_wait(ap, ATA_BUSY, 300);
1667 timer_start = jiffies;
1668 timeout = timer_start + tmout_pat;
1669 while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) {
1670 msleep(50);
1671 status = ata_busy_wait(ap, ATA_BUSY, 3);
1672 }
1673
1674 if (status & ATA_BUSY)
1675 printk(KERN_WARNING "ata%u is slow to respond, "
1676 "please be patient\n", ap->id);
1677
1678 timeout = timer_start + tmout;
1679 while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) {
1680 msleep(50);
1681 status = ata_chk_status(ap);
1682 }
1683
1684 if (status & ATA_BUSY) {
1685 printk(KERN_ERR "ata%u failed to respond (%lu secs)\n",
1686 ap->id, tmout / HZ);
1687 return 1;
1688 }
1689
1690 return 0;
1691}
1692
1693static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask)
1694{
1695 struct ata_ioports *ioaddr = &ap->ioaddr;
1696 unsigned int dev0 = devmask & (1 << 0);
1697 unsigned int dev1 = devmask & (1 << 1);
1698 unsigned long timeout;
1699
1700 /* if device 0 was found in ata_devchk, wait for its
1701 * BSY bit to clear
1702 */
1703 if (dev0)
1704 ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
1705
1706 /* if device 1 was found in ata_devchk, wait for
1707 * register access, then wait for BSY to clear
1708 */
1709 timeout = jiffies + ATA_TMOUT_BOOT;
1710 while (dev1) {
1711 u8 nsect, lbal;
1712
1713 ap->ops->dev_select(ap, 1);
1714 if (ap->flags & ATA_FLAG_MMIO) {
1715 nsect = readb((void __iomem *) ioaddr->nsect_addr);
1716 lbal = readb((void __iomem *) ioaddr->lbal_addr);
1717 } else {
1718 nsect = inb(ioaddr->nsect_addr);
1719 lbal = inb(ioaddr->lbal_addr);
1720 }
1721 if ((nsect == 1) && (lbal == 1))
1722 break;
1723 if (time_after(jiffies, timeout)) {
1724 dev1 = 0;
1725 break;
1726 }
1727 msleep(50); /* give drive a breather */
1728 }
1729 if (dev1)
1730 ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
1731
1732 /* is all this really necessary? */
1733 ap->ops->dev_select(ap, 0);
1734 if (dev1)
1735 ap->ops->dev_select(ap, 1);
1736 if (dev0)
1737 ap->ops->dev_select(ap, 0);
1738}
1739
1740/**
Jeff Garzik0cba6322005-05-30 19:49:12 -04001741 * ata_bus_edd - Issue EXECUTE DEVICE DIAGNOSTIC command.
1742 * @ap: Port to reset and probe
Linus Torvalds1da177e2005-04-16 15:20:36 -07001743 *
Jeff Garzik0cba6322005-05-30 19:49:12 -04001744 * Use the EXECUTE DEVICE DIAGNOSTIC command to reset and
1745 * probe the bus. Not often used these days.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001746 *
1747 * LOCKING:
Jeff Garzik0cba6322005-05-30 19:49:12 -04001748 * PCI/etc. bus probe sem.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001749 *
1750 */
1751
1752static unsigned int ata_bus_edd(struct ata_port *ap)
1753{
1754 struct ata_taskfile tf;
1755
1756 /* set up execute-device-diag (bus reset) taskfile */
1757 /* also, take interrupts to a known state (disabled) */
1758 DPRINTK("execute-device-diag\n");
1759 ata_tf_init(ap, &tf, 0);
1760 tf.ctl |= ATA_NIEN;
1761 tf.command = ATA_CMD_EDD;
1762 tf.protocol = ATA_PROT_NODATA;
1763
1764 /* do bus reset */
1765 ata_tf_to_host(ap, &tf);
1766
1767 /* spec says at least 2ms. but who knows with those
1768 * crazy ATAPI devices...
1769 */
1770 msleep(150);
1771
1772 return ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
1773}
1774
1775static unsigned int ata_bus_softreset(struct ata_port *ap,
1776 unsigned int devmask)
1777{
1778 struct ata_ioports *ioaddr = &ap->ioaddr;
1779
1780 DPRINTK("ata%u: bus reset via SRST\n", ap->id);
1781
1782 /* software reset. causes dev0 to be selected */
1783 if (ap->flags & ATA_FLAG_MMIO) {
1784 writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
1785 udelay(20); /* FIXME: flush */
1786 writeb(ap->ctl | ATA_SRST, (void __iomem *) ioaddr->ctl_addr);
1787 udelay(20); /* FIXME: flush */
1788 writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
1789 } else {
1790 outb(ap->ctl, ioaddr->ctl_addr);
1791 udelay(10);
1792 outb(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
1793 udelay(10);
1794 outb(ap->ctl, ioaddr->ctl_addr);
1795 }
1796
1797 /* spec mandates ">= 2ms" before checking status.
1798 * We wait 150ms, because that was the magic delay used for
1799 * ATAPI devices in Hale Landis's ATADRVR, for the period of time
1800 * between when the ATA command register is written, and then
1801 * status is checked. Because waiting for "a while" before
1802 * checking status is fine, post SRST, we perform this magic
1803 * delay here as well.
1804 */
1805 msleep(150);
1806
1807 ata_bus_post_reset(ap, devmask);
1808
1809 return 0;
1810}
1811
1812/**
1813 * ata_bus_reset - reset host port and associated ATA channel
1814 * @ap: port to reset
1815 *
1816 * This is typically the first time we actually start issuing
1817 * commands to the ATA channel. We wait for BSY to clear, then
1818 * issue EXECUTE DEVICE DIAGNOSTIC command, polling for its
1819 * result. Determine what devices, if any, are on the channel
1820 * by looking at the device 0/1 error register. Look at the signature
1821 * stored in each device's taskfile registers, to determine if
1822 * the device is ATA or ATAPI.
1823 *
1824 * LOCKING:
Jeff Garzik0cba6322005-05-30 19:49:12 -04001825 * PCI/etc. bus probe sem.
1826 * Obtains host_set lock.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001827 *
1828 * SIDE EFFECTS:
1829 * Sets ATA_FLAG_PORT_DISABLED if bus reset fails.
1830 */
1831
1832void ata_bus_reset(struct ata_port *ap)
1833{
1834 struct ata_ioports *ioaddr = &ap->ioaddr;
1835 unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
1836 u8 err;
1837 unsigned int dev0, dev1 = 0, rc = 0, devmask = 0;
1838
1839 DPRINTK("ENTER, host %u, port %u\n", ap->id, ap->port_no);
1840
1841 /* determine if device 0/1 are present */
1842 if (ap->flags & ATA_FLAG_SATA_RESET)
1843 dev0 = 1;
1844 else {
1845 dev0 = ata_devchk(ap, 0);
1846 if (slave_possible)
1847 dev1 = ata_devchk(ap, 1);
1848 }
1849
1850 if (dev0)
1851 devmask |= (1 << 0);
1852 if (dev1)
1853 devmask |= (1 << 1);
1854
1855 /* select device 0 again */
1856 ap->ops->dev_select(ap, 0);
1857
1858 /* issue bus reset */
1859 if (ap->flags & ATA_FLAG_SRST)
1860 rc = ata_bus_softreset(ap, devmask);
1861 else if ((ap->flags & ATA_FLAG_SATA_RESET) == 0) {
1862 /* set up device control */
1863 if (ap->flags & ATA_FLAG_MMIO)
1864 writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
1865 else
1866 outb(ap->ctl, ioaddr->ctl_addr);
1867 rc = ata_bus_edd(ap);
1868 }
1869
1870 if (rc)
1871 goto err_out;
1872
1873 /*
1874 * determine by signature whether we have ATA or ATAPI devices
1875 */
1876 err = ata_dev_try_classify(ap, 0);
1877 if ((slave_possible) && (err != 0x81))
1878 ata_dev_try_classify(ap, 1);
1879
1880 /* re-enable interrupts */
1881 if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */
1882 ata_irq_on(ap);
1883
1884 /* is double-select really necessary? */
1885 if (ap->device[1].class != ATA_DEV_NONE)
1886 ap->ops->dev_select(ap, 1);
1887 if (ap->device[0].class != ATA_DEV_NONE)
1888 ap->ops->dev_select(ap, 0);
1889
1890 /* if no devices were detected, disable this port */
1891 if ((ap->device[0].class == ATA_DEV_NONE) &&
1892 (ap->device[1].class == ATA_DEV_NONE))
1893 goto err_out;
1894
1895 if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) {
1896 /* set up device control for ATA_FLAG_SATA_RESET */
1897 if (ap->flags & ATA_FLAG_MMIO)
1898 writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
1899 else
1900 outb(ap->ctl, ioaddr->ctl_addr);
1901 }
1902
1903 DPRINTK("EXIT\n");
1904 return;
1905
1906err_out:
1907 printk(KERN_ERR "ata%u: disabling port\n", ap->id);
1908 ap->ops->port_disable(ap);
1909
1910 DPRINTK("EXIT\n");
1911}
1912
1913static void ata_pr_blacklisted(struct ata_port *ap, struct ata_device *dev)
1914{
1915 printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, disabling DMA\n",
1916 ap->id, dev->devno);
1917}
1918
1919static const char * ata_dma_blacklist [] = {
1920 "WDC AC11000H",
1921 "WDC AC22100H",
1922 "WDC AC32500H",
1923 "WDC AC33100H",
1924 "WDC AC31600H",
1925 "WDC AC32100H",
1926 "WDC AC23200L",
1927 "Compaq CRD-8241B",
1928 "CRD-8400B",
1929 "CRD-8480B",
1930 "CRD-8482B",
1931 "CRD-84",
1932 "SanDisk SDP3B",
1933 "SanDisk SDP3B-64",
1934 "SANYO CD-ROM CRD",
1935 "HITACHI CDR-8",
1936 "HITACHI CDR-8335",
1937 "HITACHI CDR-8435",
1938 "Toshiba CD-ROM XM-6202B",
Jeff Garzike9222562005-06-28 00:03:37 -04001939 "TOSHIBA CD-ROM XM-1702BC",
Linus Torvalds1da177e2005-04-16 15:20:36 -07001940 "CD-532E-A",
1941 "E-IDE CD-ROM CR-840",
1942 "CD-ROM Drive/F5A",
1943 "WPI CDD-820",
1944 "SAMSUNG CD-ROM SC-148C",
1945 "SAMSUNG CD-ROM SC",
1946 "SanDisk SDP3B-64",
Linus Torvalds1da177e2005-04-16 15:20:36 -07001947 "ATAPI CD-ROM DRIVE 40X MAXIMUM",
1948 "_NEC DV5800A",
1949};
1950
1951static int ata_dma_blacklisted(struct ata_port *ap, struct ata_device *dev)
1952{
1953 unsigned char model_num[40];
1954 char *s;
1955 unsigned int len;
1956 int i;
1957
1958 ata_dev_id_string(dev->id, model_num, ATA_ID_PROD_OFS,
1959 sizeof(model_num));
1960 s = &model_num[0];
1961 len = strnlen(s, sizeof(model_num));
1962
1963 /* ATAPI specifies that empty space is blank-filled; remove blanks */
1964 while ((len > 0) && (s[len - 1] == ' ')) {
1965 len--;
1966 s[len] = 0;
1967 }
1968
1969 for (i = 0; i < ARRAY_SIZE(ata_dma_blacklist); i++)
1970 if (!strncmp(ata_dma_blacklist[i], s, len))
1971 return 1;
1972
1973 return 0;
1974}
1975
1976static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift)
1977{
1978 struct ata_device *master, *slave;
1979 unsigned int mask;
1980
1981 master = &ap->device[0];
1982 slave = &ap->device[1];
1983
1984 assert (ata_dev_present(master) || ata_dev_present(slave));
1985
1986 if (shift == ATA_SHIFT_UDMA) {
1987 mask = ap->udma_mask;
1988 if (ata_dev_present(master)) {
1989 mask &= (master->id[ATA_ID_UDMA_MODES] & 0xff);
1990 if (ata_dma_blacklisted(ap, master)) {
1991 mask = 0;
1992 ata_pr_blacklisted(ap, master);
1993 }
1994 }
1995 if (ata_dev_present(slave)) {
1996 mask &= (slave->id[ATA_ID_UDMA_MODES] & 0xff);
1997 if (ata_dma_blacklisted(ap, slave)) {
1998 mask = 0;
1999 ata_pr_blacklisted(ap, slave);
2000 }
2001 }
2002 }
2003 else if (shift == ATA_SHIFT_MWDMA) {
2004 mask = ap->mwdma_mask;
2005 if (ata_dev_present(master)) {
2006 mask &= (master->id[ATA_ID_MWDMA_MODES] & 0x07);
2007 if (ata_dma_blacklisted(ap, master)) {
2008 mask = 0;
2009 ata_pr_blacklisted(ap, master);
2010 }
2011 }
2012 if (ata_dev_present(slave)) {
2013 mask &= (slave->id[ATA_ID_MWDMA_MODES] & 0x07);
2014 if (ata_dma_blacklisted(ap, slave)) {
2015 mask = 0;
2016 ata_pr_blacklisted(ap, slave);
2017 }
2018 }
2019 }
2020 else if (shift == ATA_SHIFT_PIO) {
2021 mask = ap->pio_mask;
2022 if (ata_dev_present(master)) {
2023 /* spec doesn't return explicit support for
2024 * PIO0-2, so we fake it
2025 */
2026 u16 tmp_mode = master->id[ATA_ID_PIO_MODES] & 0x03;
2027 tmp_mode <<= 3;
2028 tmp_mode |= 0x7;
2029 mask &= tmp_mode;
2030 }
2031 if (ata_dev_present(slave)) {
2032 /* spec doesn't return explicit support for
2033 * PIO0-2, so we fake it
2034 */
2035 u16 tmp_mode = slave->id[ATA_ID_PIO_MODES] & 0x03;
2036 tmp_mode <<= 3;
2037 tmp_mode |= 0x7;
2038 mask &= tmp_mode;
2039 }
2040 }
2041 else {
2042 mask = 0xffffffff; /* shut up compiler warning */
2043 BUG();
2044 }
2045
2046 return mask;
2047}
2048
2049/* find greatest bit */
2050static int fgb(u32 bitmap)
2051{
2052 unsigned int i;
2053 int x = -1;
2054
2055 for (i = 0; i < 32; i++)
2056 if (bitmap & (1 << i))
2057 x = i;
2058
2059 return x;
2060}
2061
2062/**
2063 * ata_choose_xfer_mode - attempt to find best transfer mode
2064 * @ap: Port for which an xfer mode will be selected
2065 * @xfer_mode_out: (output) SET FEATURES - XFER MODE code
2066 * @xfer_shift_out: (output) bit shift that selects this mode
2067 *
Jeff Garzik0cba6322005-05-30 19:49:12 -04002068 * Based on host and device capabilities, determine the
2069 * maximum transfer mode that is amenable to all.
2070 *
Linus Torvalds1da177e2005-04-16 15:20:36 -07002071 * LOCKING:
Jeff Garzik0cba6322005-05-30 19:49:12 -04002072 * PCI/etc. bus probe sem.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002073 *
2074 * RETURNS:
2075 * Zero on success, negative on error.
2076 */
2077
2078static int ata_choose_xfer_mode(struct ata_port *ap,
2079 u8 *xfer_mode_out,
2080 unsigned int *xfer_shift_out)
2081{
2082 unsigned int mask, shift;
2083 int x, i;
2084
2085 for (i = 0; i < ARRAY_SIZE(xfer_mode_classes); i++) {
2086 shift = xfer_mode_classes[i].shift;
2087 mask = ata_get_mode_mask(ap, shift);
2088
2089 x = fgb(mask);
2090 if (x >= 0) {
2091 *xfer_mode_out = xfer_mode_classes[i].base + x;
2092 *xfer_shift_out = shift;
2093 return 0;
2094 }
2095 }
2096
2097 return -1;
2098}
2099
2100/**
2101 * ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command
2102 * @ap: Port associated with device @dev
2103 * @dev: Device to which command will be sent
2104 *
Jeff Garzik780a87f2005-05-30 15:41:05 -04002105 * Issue SET FEATURES - XFER MODE command to device @dev
2106 * on port @ap.
2107 *
Linus Torvalds1da177e2005-04-16 15:20:36 -07002108 * LOCKING:
Jeff Garzik0cba6322005-05-30 19:49:12 -04002109 * PCI/etc. bus probe sem.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002110 */
2111
2112static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev)
2113{
2114 DECLARE_COMPLETION(wait);
2115 struct ata_queued_cmd *qc;
2116 int rc;
2117 unsigned long flags;
2118
2119 /* set up set-features taskfile */
2120 DPRINTK("set features - xfer mode\n");
2121
2122 qc = ata_qc_new_init(ap, dev);
2123 BUG_ON(qc == NULL);
2124
2125 qc->tf.command = ATA_CMD_SET_FEATURES;
2126 qc->tf.feature = SETFEATURES_XFER;
2127 qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
2128 qc->tf.protocol = ATA_PROT_NODATA;
2129 qc->tf.nsect = dev->xfer_mode;
2130
2131 qc->waiting = &wait;
2132 qc->complete_fn = ata_qc_complete_noop;
2133
2134 spin_lock_irqsave(&ap->host_set->lock, flags);
2135 rc = ata_qc_issue(qc);
2136 spin_unlock_irqrestore(&ap->host_set->lock, flags);
2137
2138 if (rc)
2139 ata_port_disable(ap);
2140 else
2141 wait_for_completion(&wait);
2142
2143 DPRINTK("EXIT\n");
2144}
2145
2146/**
Jeff Garzik0cba6322005-05-30 19:49:12 -04002147 * ata_sg_clean - Unmap DMA memory associated with command
2148 * @qc: Command containing DMA memory to be released
2149 *
2150 * Unmap all mapped DMA memory associated with this command.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002151 *
2152 * LOCKING:
Jeff Garzik0cba6322005-05-30 19:49:12 -04002153 * spin_lock_irqsave(host_set lock)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002154 */
2155
2156static void ata_sg_clean(struct ata_queued_cmd *qc)
2157{
2158 struct ata_port *ap = qc->ap;
2159 struct scatterlist *sg = qc->sg;
2160 int dir = qc->dma_dir;
2161
2162 assert(qc->flags & ATA_QCFLAG_DMAMAP);
2163 assert(sg != NULL);
2164
2165 if (qc->flags & ATA_QCFLAG_SINGLE)
2166 assert(qc->n_elem == 1);
2167
2168 DPRINTK("unmapping %u sg elements\n", qc->n_elem);
2169
2170 if (qc->flags & ATA_QCFLAG_SG)
2171 dma_unmap_sg(ap->host_set->dev, sg, qc->n_elem, dir);
2172 else
2173 dma_unmap_single(ap->host_set->dev, sg_dma_address(&sg[0]),
2174 sg_dma_len(&sg[0]), dir);
2175
2176 qc->flags &= ~ATA_QCFLAG_DMAMAP;
2177 qc->sg = NULL;
2178}
2179
2180/**
2181 * ata_fill_sg - Fill PCI IDE PRD table
2182 * @qc: Metadata associated with taskfile to be transferred
2183 *
Jeff Garzik780a87f2005-05-30 15:41:05 -04002184 * Fill PCI IDE PRD (scatter-gather) table with segments
2185 * associated with the current disk command.
2186 *
Linus Torvalds1da177e2005-04-16 15:20:36 -07002187 * LOCKING:
Jeff Garzik780a87f2005-05-30 15:41:05 -04002188 * spin_lock_irqsave(host_set lock)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002189 *
2190 */
2191static void ata_fill_sg(struct ata_queued_cmd *qc)
2192{
2193 struct scatterlist *sg = qc->sg;
2194 struct ata_port *ap = qc->ap;
2195 unsigned int idx, nelem;
2196
2197 assert(sg != NULL);
2198 assert(qc->n_elem > 0);
2199
2200 idx = 0;
2201 for (nelem = qc->n_elem; nelem; nelem--,sg++) {
2202 u32 addr, offset;
2203 u32 sg_len, len;
2204
2205 /* determine if physical DMA addr spans 64K boundary.
2206 * Note h/w doesn't support 64-bit, so we unconditionally
2207 * truncate dma_addr_t to u32.
2208 */
2209 addr = (u32) sg_dma_address(sg);
2210 sg_len = sg_dma_len(sg);
2211
2212 while (sg_len) {
2213 offset = addr & 0xffff;
2214 len = sg_len;
2215 if ((offset + sg_len) > 0x10000)
2216 len = 0x10000 - offset;
2217
2218 ap->prd[idx].addr = cpu_to_le32(addr);
2219 ap->prd[idx].flags_len = cpu_to_le32(len & 0xffff);
2220 VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len);
2221
2222 idx++;
2223 sg_len -= len;
2224 addr += len;
2225 }
2226 }
2227
2228 if (idx)
2229 ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
2230}
2231/**
2232 * ata_check_atapi_dma - Check whether ATAPI DMA can be supported
2233 * @qc: Metadata associated with taskfile to check
2234 *
Jeff Garzik780a87f2005-05-30 15:41:05 -04002235 * Allow low-level driver to filter ATA PACKET commands, returning
2236 * a status indicating whether or not it is OK to use DMA for the
2237 * supplied PACKET command.
2238 *
Linus Torvalds1da177e2005-04-16 15:20:36 -07002239 * LOCKING:
Jeff Garzik0cba6322005-05-30 19:49:12 -04002240 * spin_lock_irqsave(host_set lock)
2241 *
Linus Torvalds1da177e2005-04-16 15:20:36 -07002242 * RETURNS: 0 when ATAPI DMA can be used
2243 * nonzero otherwise
2244 */
2245int ata_check_atapi_dma(struct ata_queued_cmd *qc)
2246{
2247 struct ata_port *ap = qc->ap;
2248 int rc = 0; /* Assume ATAPI DMA is OK by default */
2249
2250 if (ap->ops->check_atapi_dma)
2251 rc = ap->ops->check_atapi_dma(qc);
2252
2253 return rc;
2254}
2255/**
2256 * ata_qc_prep - Prepare taskfile for submission
2257 * @qc: Metadata associated with taskfile to be prepared
2258 *
Jeff Garzik780a87f2005-05-30 15:41:05 -04002259 * Prepare ATA taskfile for submission.
2260 *
Linus Torvalds1da177e2005-04-16 15:20:36 -07002261 * LOCKING:
2262 * spin_lock_irqsave(host_set lock)
2263 */
2264void ata_qc_prep(struct ata_queued_cmd *qc)
2265{
2266 if (!(qc->flags & ATA_QCFLAG_DMAMAP))
2267 return;
2268
2269 ata_fill_sg(qc);
2270}
2271
Jeff Garzik0cba6322005-05-30 19:49:12 -04002272/**
2273 * ata_sg_init_one - Associate command with memory buffer
2274 * @qc: Command to be associated
2275 * @buf: Memory buffer
2276 * @buflen: Length of memory buffer, in bytes.
2277 *
2278 * Initialize the data-related elements of queued_cmd @qc
2279 * to point to a single memory buffer, @buf of byte length @buflen.
2280 *
2281 * LOCKING:
2282 * spin_lock_irqsave(host_set lock)
2283 */
2284
Linus Torvalds1da177e2005-04-16 15:20:36 -07002285void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
2286{
2287 struct scatterlist *sg;
2288
2289 qc->flags |= ATA_QCFLAG_SINGLE;
2290
2291 memset(&qc->sgent, 0, sizeof(qc->sgent));
2292 qc->sg = &qc->sgent;
2293 qc->n_elem = 1;
2294 qc->buf_virt = buf;
2295
2296 sg = qc->sg;
2297 sg->page = virt_to_page(buf);
2298 sg->offset = (unsigned long) buf & ~PAGE_MASK;
Albert Lee32529e02005-05-26 03:49:42 -04002299 sg->length = buflen;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002300}
2301
Jeff Garzik0cba6322005-05-30 19:49:12 -04002302/**
2303 * ata_sg_init - Associate command with scatter-gather table.
2304 * @qc: Command to be associated
2305 * @sg: Scatter-gather table.
2306 * @n_elem: Number of elements in s/g table.
2307 *
2308 * Initialize the data-related elements of queued_cmd @qc
2309 * to point to a scatter-gather table @sg, containing @n_elem
2310 * elements.
2311 *
2312 * LOCKING:
2313 * spin_lock_irqsave(host_set lock)
2314 */
2315
Linus Torvalds1da177e2005-04-16 15:20:36 -07002316void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
2317 unsigned int n_elem)
2318{
2319 qc->flags |= ATA_QCFLAG_SG;
2320 qc->sg = sg;
2321 qc->n_elem = n_elem;
2322}
2323
2324/**
Jeff Garzik0cba6322005-05-30 19:49:12 -04002325 * ata_sg_setup_one - DMA-map the memory buffer associated with a command.
2326 * @qc: Command with memory buffer to be mapped.
2327 *
2328 * DMA-map the memory buffer associated with queued_cmd @qc.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002329 *
2330 * LOCKING:
2331 * spin_lock_irqsave(host_set lock)
2332 *
2333 * RETURNS:
Jeff Garzik0cba6322005-05-30 19:49:12 -04002334 * Zero on success, negative on error.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002335 */
2336
2337static int ata_sg_setup_one(struct ata_queued_cmd *qc)
2338{
2339 struct ata_port *ap = qc->ap;
2340 int dir = qc->dma_dir;
2341 struct scatterlist *sg = qc->sg;
2342 dma_addr_t dma_address;
2343
2344 dma_address = dma_map_single(ap->host_set->dev, qc->buf_virt,
Albert Lee32529e02005-05-26 03:49:42 -04002345 sg->length, dir);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002346 if (dma_mapping_error(dma_address))
2347 return -1;
2348
2349 sg_dma_address(sg) = dma_address;
Albert Lee32529e02005-05-26 03:49:42 -04002350 sg_dma_len(sg) = sg->length;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002351
2352 DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg),
2353 qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
2354
2355 return 0;
2356}
2357
2358/**
Jeff Garzik0cba6322005-05-30 19:49:12 -04002359 * ata_sg_setup - DMA-map the scatter-gather table associated with a command.
2360 * @qc: Command with scatter-gather table to be mapped.
2361 *
2362 * DMA-map the scatter-gather table associated with queued_cmd @qc.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002363 *
2364 * LOCKING:
2365 * spin_lock_irqsave(host_set lock)
2366 *
2367 * RETURNS:
Jeff Garzik0cba6322005-05-30 19:49:12 -04002368 * Zero on success, negative on error.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002369 *
2370 */
2371
2372static int ata_sg_setup(struct ata_queued_cmd *qc)
2373{
2374 struct ata_port *ap = qc->ap;
2375 struct scatterlist *sg = qc->sg;
2376 int n_elem, dir;
2377
2378 VPRINTK("ENTER, ata%u\n", ap->id);
2379 assert(qc->flags & ATA_QCFLAG_SG);
2380
2381 dir = qc->dma_dir;
2382 n_elem = dma_map_sg(ap->host_set->dev, sg, qc->n_elem, dir);
2383 if (n_elem < 1)
2384 return -1;
2385
2386 DPRINTK("%d sg elements mapped\n", n_elem);
2387
2388 qc->n_elem = n_elem;
2389
2390 return 0;
2391}
2392
2393/**
Tejun Heo40e8c822005-08-22 17:12:45 +09002394 * ata_poll_qc_complete - turn irq back on and finish qc
2395 * @qc: Command to complete
2396 * @drv_stat: ATA status register content
2397 *
2398 * LOCKING:
2399 * None. (grabs host lock)
2400 */
2401
2402void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
2403{
2404 struct ata_port *ap = qc->ap;
Jeff Garzikb8f61532005-08-25 22:01:20 -04002405 unsigned long flags;
Tejun Heo40e8c822005-08-22 17:12:45 +09002406
Jeff Garzikb8f61532005-08-25 22:01:20 -04002407 spin_lock_irqsave(&ap->host_set->lock, flags);
Tejun Heo40e8c822005-08-22 17:12:45 +09002408 ap->flags &= ~ATA_FLAG_NOINTR;
2409 ata_irq_on(ap);
2410 ata_qc_complete(qc, drv_stat);
Jeff Garzikb8f61532005-08-25 22:01:20 -04002411 spin_unlock_irqrestore(&ap->host_set->lock, flags);
Tejun Heo40e8c822005-08-22 17:12:45 +09002412}
2413
2414/**
Linus Torvalds1da177e2005-04-16 15:20:36 -07002415 * ata_pio_poll -
2416 * @ap:
2417 *
2418 * LOCKING:
Jeff Garzik0cba6322005-05-30 19:49:12 -04002419 * None. (executing in kernel thread context)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002420 *
2421 * RETURNS:
2422 *
2423 */
2424
2425static unsigned long ata_pio_poll(struct ata_port *ap)
2426{
2427 u8 status;
2428 unsigned int poll_state = PIO_ST_UNKNOWN;
2429 unsigned int reg_state = PIO_ST_UNKNOWN;
2430 const unsigned int tmout_state = PIO_ST_TMOUT;
2431
2432 switch (ap->pio_task_state) {
2433 case PIO_ST:
2434 case PIO_ST_POLL:
2435 poll_state = PIO_ST_POLL;
2436 reg_state = PIO_ST;
2437 break;
2438 case PIO_ST_LAST:
2439 case PIO_ST_LAST_POLL:
2440 poll_state = PIO_ST_LAST_POLL;
2441 reg_state = PIO_ST_LAST;
2442 break;
2443 default:
2444 BUG();
2445 break;
2446 }
2447
2448 status = ata_chk_status(ap);
2449 if (status & ATA_BUSY) {
2450 if (time_after(jiffies, ap->pio_task_timeout)) {
2451 ap->pio_task_state = tmout_state;
2452 return 0;
2453 }
2454 ap->pio_task_state = poll_state;
2455 return ATA_SHORT_PAUSE;
2456 }
2457
2458 ap->pio_task_state = reg_state;
2459 return 0;
2460}
2461
2462/**
2463 * ata_pio_complete -
2464 * @ap:
2465 *
2466 * LOCKING:
Jeff Garzik0cba6322005-05-30 19:49:12 -04002467 * None. (executing in kernel thread context)
Jeff Garzik7fb6ec22005-09-16 06:01:48 -04002468 *
2469 * RETURNS:
2470 * Non-zero if qc completed, zero otherwise.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002471 */
2472
Jeff Garzik7fb6ec22005-09-16 06:01:48 -04002473static int ata_pio_complete (struct ata_port *ap)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002474{
2475 struct ata_queued_cmd *qc;
2476 u8 drv_stat;
2477
2478 /*
Alan Cox31433ea2005-08-26 15:56:47 +01002479 * This is purely heuristic. This is a fast path. Sometimes when
2480 * we enter, BSY will be cleared in a chk-status or two. If not,
2481 * the drive is probably seeking or something. Snooze for a couple
2482 * msecs, then chk-status again. If still busy, fall back to
Linus Torvalds1da177e2005-04-16 15:20:36 -07002483 * PIO_ST_POLL state.
2484 */
2485 drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10);
2486 if (drv_stat & (ATA_BUSY | ATA_DRQ)) {
2487 msleep(2);
2488 drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10);
2489 if (drv_stat & (ATA_BUSY | ATA_DRQ)) {
2490 ap->pio_task_state = PIO_ST_LAST_POLL;
2491 ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO;
Jeff Garzik7fb6ec22005-09-16 06:01:48 -04002492 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002493 }
2494 }
2495
2496 drv_stat = ata_wait_idle(ap);
2497 if (!ata_ok(drv_stat)) {
2498 ap->pio_task_state = PIO_ST_ERR;
Jeff Garzik7fb6ec22005-09-16 06:01:48 -04002499 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002500 }
2501
2502 qc = ata_qc_from_tag(ap, ap->active_tag);
2503 assert(qc != NULL);
2504
2505 ap->pio_task_state = PIO_ST_IDLE;
2506
Tejun Heo40e8c822005-08-22 17:12:45 +09002507 ata_poll_qc_complete(qc, drv_stat);
Jeff Garzik7fb6ec22005-09-16 06:01:48 -04002508
2509 /* another command may start at this point */
2510
2511 return 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002512}
2513
Edward Falk0baab862005-06-02 18:17:13 -04002514
2515/**
2516 * swap_buf_le16 -
2517 * @buf: Buffer to swap
2518 * @buf_words: Number of 16-bit words in buffer.
2519 *
2520 * Swap halves of 16-bit words if needed to convert from
2521 * little-endian byte order to native cpu byte order, or
2522 * vice-versa.
2523 *
2524 * LOCKING:
2525 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002526void swap_buf_le16(u16 *buf, unsigned int buf_words)
2527{
2528#ifdef __BIG_ENDIAN
2529 unsigned int i;
2530
2531 for (i = 0; i < buf_words; i++)
2532 buf[i] = le16_to_cpu(buf[i]);
2533#endif /* __BIG_ENDIAN */
2534}
2535
Albert Lee6ae4cfb2005-08-12 14:15:34 +08002536/**
2537 * ata_mmio_data_xfer - Transfer data by MMIO
2538 * @ap: port to read/write
2539 * @buf: data buffer
2540 * @buflen: buffer length
Jeff Garzik344baba2005-09-07 01:15:17 -04002541 * @write_data: read/write
Albert Lee6ae4cfb2005-08-12 14:15:34 +08002542 *
2543 * Transfer data from/to the device data register by MMIO.
2544 *
2545 * LOCKING:
2546 * Inherited from caller.
2547 *
2548 */
2549
Linus Torvalds1da177e2005-04-16 15:20:36 -07002550static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf,
2551 unsigned int buflen, int write_data)
2552{
2553 unsigned int i;
2554 unsigned int words = buflen >> 1;
2555 u16 *buf16 = (u16 *) buf;
2556 void __iomem *mmio = (void __iomem *)ap->ioaddr.data_addr;
2557
Albert Lee6ae4cfb2005-08-12 14:15:34 +08002558 /* Transfer multiple of 2 bytes */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002559 if (write_data) {
2560 for (i = 0; i < words; i++)
2561 writew(le16_to_cpu(buf16[i]), mmio);
2562 } else {
2563 for (i = 0; i < words; i++)
2564 buf16[i] = cpu_to_le16(readw(mmio));
2565 }
Albert Lee6ae4cfb2005-08-12 14:15:34 +08002566
2567 /* Transfer trailing 1 byte, if any. */
2568 if (unlikely(buflen & 0x01)) {
2569 u16 align_buf[1] = { 0 };
2570 unsigned char *trailing_buf = buf + buflen - 1;
2571
2572 if (write_data) {
2573 memcpy(align_buf, trailing_buf, 1);
2574 writew(le16_to_cpu(align_buf[0]), mmio);
2575 } else {
2576 align_buf[0] = cpu_to_le16(readw(mmio));
2577 memcpy(trailing_buf, align_buf, 1);
2578 }
2579 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07002580}
2581
Albert Lee6ae4cfb2005-08-12 14:15:34 +08002582/**
2583 * ata_pio_data_xfer - Transfer data by PIO
2584 * @ap: port to read/write
2585 * @buf: data buffer
2586 * @buflen: buffer length
Jeff Garzik344baba2005-09-07 01:15:17 -04002587 * @write_data: read/write
Albert Lee6ae4cfb2005-08-12 14:15:34 +08002588 *
2589 * Transfer data from/to the device data register by PIO.
2590 *
2591 * LOCKING:
2592 * Inherited from caller.
2593 *
2594 */
2595
Linus Torvalds1da177e2005-04-16 15:20:36 -07002596static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf,
2597 unsigned int buflen, int write_data)
2598{
Albert Lee6ae4cfb2005-08-12 14:15:34 +08002599 unsigned int words = buflen >> 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002600
Albert Lee6ae4cfb2005-08-12 14:15:34 +08002601 /* Transfer multiple of 2 bytes */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002602 if (write_data)
Albert Lee6ae4cfb2005-08-12 14:15:34 +08002603 outsw(ap->ioaddr.data_addr, buf, words);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002604 else
Albert Lee6ae4cfb2005-08-12 14:15:34 +08002605 insw(ap->ioaddr.data_addr, buf, words);
2606
2607 /* Transfer trailing 1 byte, if any. */
2608 if (unlikely(buflen & 0x01)) {
2609 u16 align_buf[1] = { 0 };
2610 unsigned char *trailing_buf = buf + buflen - 1;
2611
2612 if (write_data) {
2613 memcpy(align_buf, trailing_buf, 1);
2614 outw(le16_to_cpu(align_buf[0]), ap->ioaddr.data_addr);
2615 } else {
2616 align_buf[0] = cpu_to_le16(inw(ap->ioaddr.data_addr));
2617 memcpy(trailing_buf, align_buf, 1);
2618 }
2619 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07002620}
2621
Albert Lee6ae4cfb2005-08-12 14:15:34 +08002622/**
2623 * ata_data_xfer - Transfer data from/to the data register.
2624 * @ap: port to read/write
2625 * @buf: data buffer
2626 * @buflen: buffer length
2627 * @do_write: read/write
2628 *
2629 * Transfer data from/to the device data register.
2630 *
2631 * LOCKING:
2632 * Inherited from caller.
2633 *
2634 */
2635
Linus Torvalds1da177e2005-04-16 15:20:36 -07002636static void ata_data_xfer(struct ata_port *ap, unsigned char *buf,
2637 unsigned int buflen, int do_write)
2638{
2639 if (ap->flags & ATA_FLAG_MMIO)
2640 ata_mmio_data_xfer(ap, buf, buflen, do_write);
2641 else
2642 ata_pio_data_xfer(ap, buf, buflen, do_write);
2643}
2644
Albert Lee6ae4cfb2005-08-12 14:15:34 +08002645/**
2646 * ata_pio_sector - Transfer ATA_SECT_SIZE (512 bytes) of data.
2647 * @qc: Command on going
2648 *
2649 * Transfer ATA_SECT_SIZE of data from/to the ATA device.
2650 *
2651 * LOCKING:
2652 * Inherited from caller.
2653 */
2654
Linus Torvalds1da177e2005-04-16 15:20:36 -07002655static void ata_pio_sector(struct ata_queued_cmd *qc)
2656{
2657 int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
2658 struct scatterlist *sg = qc->sg;
2659 struct ata_port *ap = qc->ap;
2660 struct page *page;
2661 unsigned int offset;
2662 unsigned char *buf;
2663
2664 if (qc->cursect == (qc->nsect - 1))
2665 ap->pio_task_state = PIO_ST_LAST;
2666
2667 page = sg[qc->cursg].page;
2668 offset = sg[qc->cursg].offset + qc->cursg_ofs * ATA_SECT_SIZE;
2669
2670 /* get the current page and offset */
2671 page = nth_page(page, (offset >> PAGE_SHIFT));
2672 offset %= PAGE_SIZE;
2673
2674 buf = kmap(page) + offset;
2675
2676 qc->cursect++;
2677 qc->cursg_ofs++;
2678
Albert Lee32529e02005-05-26 03:49:42 -04002679 if ((qc->cursg_ofs * ATA_SECT_SIZE) == (&sg[qc->cursg])->length) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002680 qc->cursg++;
2681 qc->cursg_ofs = 0;
2682 }
2683
2684 DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
2685
2686 /* do the actual data transfer */
2687 do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
2688 ata_data_xfer(ap, buf, ATA_SECT_SIZE, do_write);
2689
2690 kunmap(page);
2691}
2692
Albert Lee6ae4cfb2005-08-12 14:15:34 +08002693/**
2694 * __atapi_pio_bytes - Transfer data from/to the ATAPI device.
2695 * @qc: Command on going
2696 * @bytes: number of bytes
2697 *
2698 * Transfer Transfer data from/to the ATAPI device.
2699 *
2700 * LOCKING:
2701 * Inherited from caller.
2702 *
2703 */
2704
Linus Torvalds1da177e2005-04-16 15:20:36 -07002705static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes)
2706{
2707 int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
2708 struct scatterlist *sg = qc->sg;
2709 struct ata_port *ap = qc->ap;
2710 struct page *page;
2711 unsigned char *buf;
2712 unsigned int offset, count;
2713
Albert Lee563a6e12005-08-12 14:17:50 +08002714 if (qc->curbytes + bytes >= qc->nbytes)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002715 ap->pio_task_state = PIO_ST_LAST;
2716
2717next_sg:
Albert Lee563a6e12005-08-12 14:17:50 +08002718 if (unlikely(qc->cursg >= qc->n_elem)) {
Jeff Garzik7fb6ec22005-09-16 06:01:48 -04002719 /*
Albert Lee563a6e12005-08-12 14:17:50 +08002720 * The end of qc->sg is reached and the device expects
2721 * more data to transfer. In order not to overrun qc->sg
2722 * and fulfill length specified in the byte count register,
2723 * - for read case, discard trailing data from the device
2724 * - for write case, padding zero data to the device
2725 */
2726 u16 pad_buf[1] = { 0 };
2727 unsigned int words = bytes >> 1;
2728 unsigned int i;
2729
2730 if (words) /* warning if bytes > 1 */
Jeff Garzik7fb6ec22005-09-16 06:01:48 -04002731 printk(KERN_WARNING "ata%u: %u bytes trailing data\n",
Albert Lee563a6e12005-08-12 14:17:50 +08002732 ap->id, bytes);
2733
2734 for (i = 0; i < words; i++)
2735 ata_data_xfer(ap, (unsigned char*)pad_buf, 2, do_write);
2736
2737 ap->pio_task_state = PIO_ST_LAST;
2738 return;
2739 }
2740
Linus Torvalds1da177e2005-04-16 15:20:36 -07002741 sg = &qc->sg[qc->cursg];
2742
Linus Torvalds1da177e2005-04-16 15:20:36 -07002743 page = sg->page;
2744 offset = sg->offset + qc->cursg_ofs;
2745
2746 /* get the current page and offset */
2747 page = nth_page(page, (offset >> PAGE_SHIFT));
2748 offset %= PAGE_SIZE;
2749
Albert Lee6952df02005-06-06 15:56:03 +08002750 /* don't overrun current sg */
Albert Lee32529e02005-05-26 03:49:42 -04002751 count = min(sg->length - qc->cursg_ofs, bytes);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002752
2753 /* don't cross page boundaries */
2754 count = min(count, (unsigned int)PAGE_SIZE - offset);
2755
2756 buf = kmap(page) + offset;
2757
2758 bytes -= count;
2759 qc->curbytes += count;
2760 qc->cursg_ofs += count;
2761
Albert Lee32529e02005-05-26 03:49:42 -04002762 if (qc->cursg_ofs == sg->length) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002763 qc->cursg++;
2764 qc->cursg_ofs = 0;
2765 }
2766
2767 DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
2768
2769 /* do the actual data transfer */
2770 ata_data_xfer(ap, buf, count, do_write);
2771
2772 kunmap(page);
2773
Albert Lee563a6e12005-08-12 14:17:50 +08002774 if (bytes)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002775 goto next_sg;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002776}
2777
Albert Lee6ae4cfb2005-08-12 14:15:34 +08002778/**
2779 * atapi_pio_bytes - Transfer data from/to the ATAPI device.
2780 * @qc: Command on going
2781 *
2782 * Transfer Transfer data from/to the ATAPI device.
2783 *
2784 * LOCKING:
2785 * Inherited from caller.
2786 *
2787 */
2788
Linus Torvalds1da177e2005-04-16 15:20:36 -07002789static void atapi_pio_bytes(struct ata_queued_cmd *qc)
2790{
2791 struct ata_port *ap = qc->ap;
2792 struct ata_device *dev = qc->dev;
2793 unsigned int ireason, bc_lo, bc_hi, bytes;
2794 int i_write, do_write = (qc->tf.flags & ATA_TFLAG_WRITE) ? 1 : 0;
2795
2796 ap->ops->tf_read(ap, &qc->tf);
2797 ireason = qc->tf.nsect;
2798 bc_lo = qc->tf.lbam;
2799 bc_hi = qc->tf.lbah;
2800 bytes = (bc_hi << 8) | bc_lo;
2801
2802 /* shall be cleared to zero, indicating xfer of data */
2803 if (ireason & (1 << 0))
2804 goto err_out;
2805
2806 /* make sure transfer direction matches expected */
2807 i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0;
2808 if (do_write != i_write)
2809 goto err_out;
2810
2811 __atapi_pio_bytes(qc, bytes);
2812
2813 return;
2814
2815err_out:
2816 printk(KERN_INFO "ata%u: dev %u: ATAPI check failed\n",
2817 ap->id, dev->devno);
2818 ap->pio_task_state = PIO_ST_ERR;
2819}
2820
2821/**
2822 * ata_pio_sector -
2823 * @ap:
2824 *
2825 * LOCKING:
Jeff Garzik0cba6322005-05-30 19:49:12 -04002826 * None. (executing in kernel thread context)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002827 */
2828
2829static void ata_pio_block(struct ata_port *ap)
2830{
2831 struct ata_queued_cmd *qc;
2832 u8 status;
2833
2834 /*
2835 * This is purely hueristic. This is a fast path.
2836 * Sometimes when we enter, BSY will be cleared in
2837 * a chk-status or two. If not, the drive is probably seeking
2838 * or something. Snooze for a couple msecs, then
2839 * chk-status again. If still busy, fall back to
2840 * PIO_ST_POLL state.
2841 */
2842 status = ata_busy_wait(ap, ATA_BUSY, 5);
2843 if (status & ATA_BUSY) {
2844 msleep(2);
2845 status = ata_busy_wait(ap, ATA_BUSY, 10);
2846 if (status & ATA_BUSY) {
2847 ap->pio_task_state = PIO_ST_POLL;
2848 ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO;
2849 return;
2850 }
2851 }
2852
2853 qc = ata_qc_from_tag(ap, ap->active_tag);
2854 assert(qc != NULL);
2855
2856 if (is_atapi_taskfile(&qc->tf)) {
2857 /* no more data to transfer or unsupported ATAPI command */
2858 if ((status & ATA_DRQ) == 0) {
Jeff Garzik7fb6ec22005-09-16 06:01:48 -04002859 ap->pio_task_state = PIO_ST_LAST;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002860 return;
2861 }
2862
2863 atapi_pio_bytes(qc);
2864 } else {
2865 /* handle BSY=0, DRQ=0 as error */
2866 if ((status & ATA_DRQ) == 0) {
2867 ap->pio_task_state = PIO_ST_ERR;
2868 return;
2869 }
2870
2871 ata_pio_sector(qc);
2872 }
2873}
2874
2875static void ata_pio_error(struct ata_port *ap)
2876{
2877 struct ata_queued_cmd *qc;
2878 u8 drv_stat;
2879
2880 qc = ata_qc_from_tag(ap, ap->active_tag);
2881 assert(qc != NULL);
2882
2883 drv_stat = ata_chk_status(ap);
2884 printk(KERN_WARNING "ata%u: PIO error, drv_stat 0x%x\n",
2885 ap->id, drv_stat);
2886
2887 ap->pio_task_state = PIO_ST_IDLE;
2888
Tejun Heo40e8c822005-08-22 17:12:45 +09002889 ata_poll_qc_complete(qc, drv_stat | ATA_ERR);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002890}
2891
2892static void ata_pio_task(void *_data)
2893{
2894 struct ata_port *ap = _data;
Jeff Garzik7fb6ec22005-09-16 06:01:48 -04002895 unsigned long timeout;
2896 int qc_completed;
2897
2898fsm_start:
2899 timeout = 0;
2900 qc_completed = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002901
2902 switch (ap->pio_task_state) {
2903 case PIO_ST_IDLE:
2904 return;
2905
2906 case PIO_ST:
2907 ata_pio_block(ap);
2908 break;
2909
2910 case PIO_ST_LAST:
Jeff Garzik7fb6ec22005-09-16 06:01:48 -04002911 qc_completed = ata_pio_complete(ap);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002912 break;
2913
2914 case PIO_ST_POLL:
2915 case PIO_ST_LAST_POLL:
2916 timeout = ata_pio_poll(ap);
2917 break;
2918
2919 case PIO_ST_TMOUT:
2920 case PIO_ST_ERR:
2921 ata_pio_error(ap);
2922 return;
2923 }
2924
2925 if (timeout)
Jeff Garzik7fb6ec22005-09-16 06:01:48 -04002926 queue_delayed_work(ata_wq, &ap->pio_task, timeout);
2927 else if (!qc_completed)
2928 goto fsm_start;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002929}
2930
2931static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
2932 struct scsi_cmnd *cmd)
2933{
2934 DECLARE_COMPLETION(wait);
2935 struct ata_queued_cmd *qc;
2936 unsigned long flags;
2937 int rc;
2938
2939 DPRINTK("ATAPI request sense\n");
2940
2941 qc = ata_qc_new_init(ap, dev);
2942 BUG_ON(qc == NULL);
2943
2944 /* FIXME: is this needed? */
2945 memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
2946
2947 ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer));
2948 qc->dma_dir = DMA_FROM_DEVICE;
2949
Albert Lee21b1ed72005-04-29 17:34:59 +08002950 memset(&qc->cdb, 0, ap->cdb_len);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002951 qc->cdb[0] = REQUEST_SENSE;
2952 qc->cdb[4] = SCSI_SENSE_BUFFERSIZE;
2953
2954 qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
2955 qc->tf.command = ATA_CMD_PACKET;
2956
2957 qc->tf.protocol = ATA_PROT_ATAPI;
2958 qc->tf.lbam = (8 * 1024) & 0xff;
2959 qc->tf.lbah = (8 * 1024) >> 8;
2960 qc->nbytes = SCSI_SENSE_BUFFERSIZE;
2961
2962 qc->waiting = &wait;
2963 qc->complete_fn = ata_qc_complete_noop;
2964
2965 spin_lock_irqsave(&ap->host_set->lock, flags);
2966 rc = ata_qc_issue(qc);
2967 spin_unlock_irqrestore(&ap->host_set->lock, flags);
2968
2969 if (rc)
2970 ata_port_disable(ap);
2971 else
2972 wait_for_completion(&wait);
2973
2974 DPRINTK("EXIT\n");
2975}
2976
2977/**
2978 * ata_qc_timeout - Handle timeout of queued command
2979 * @qc: Command that timed out
2980 *
2981 * Some part of the kernel (currently, only the SCSI layer)
2982 * has noticed that the active command on port @ap has not
2983 * completed after a specified length of time. Handle this
2984 * condition by disabling DMA (if necessary) and completing
2985 * transactions, with error if necessary.
2986 *
2987 * This also handles the case of the "lost interrupt", where
2988 * for some reason (possibly hardware bug, possibly driver bug)
2989 * an interrupt was not delivered to the driver, even though the
2990 * transaction completed successfully.
2991 *
2992 * LOCKING:
Jeff Garzik0cba6322005-05-30 19:49:12 -04002993 * Inherited from SCSI layer (none, can sleep)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002994 */
2995
2996static void ata_qc_timeout(struct ata_queued_cmd *qc)
2997{
2998 struct ata_port *ap = qc->ap;
Jeff Garzikb8f61532005-08-25 22:01:20 -04002999 struct ata_host_set *host_set = ap->host_set;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003000 struct ata_device *dev = qc->dev;
3001 u8 host_stat = 0, drv_stat;
Jeff Garzikb8f61532005-08-25 22:01:20 -04003002 unsigned long flags;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003003
3004 DPRINTK("ENTER\n");
3005
3006 /* FIXME: doesn't this conflict with timeout handling? */
3007 if (qc->dev->class == ATA_DEV_ATAPI && qc->scsicmd) {
3008 struct scsi_cmnd *cmd = qc->scsicmd;
3009
Christoph Hellwig3111b0d2005-06-19 13:43:26 +02003010 if (!(cmd->eh_eflags & SCSI_EH_CANCEL_CMD)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07003011
3012 /* finish completing original command */
Jeff Garzikb8f61532005-08-25 22:01:20 -04003013 spin_lock_irqsave(&host_set->lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003014 __ata_qc_complete(qc);
Jeff Garzikb8f61532005-08-25 22:01:20 -04003015 spin_unlock_irqrestore(&host_set->lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003016
3017 atapi_request_sense(ap, dev, cmd);
3018
3019 cmd->result = (CHECK_CONDITION << 1) | (DID_OK << 16);
3020 scsi_finish_command(cmd);
3021
3022 goto out;
3023 }
3024 }
3025
Jeff Garzikb8f61532005-08-25 22:01:20 -04003026 spin_lock_irqsave(&host_set->lock, flags);
3027
Linus Torvalds1da177e2005-04-16 15:20:36 -07003028 /* hack alert! We cannot use the supplied completion
3029 * function from inside the ->eh_strategy_handler() thread.
3030 * libata is the only user of ->eh_strategy_handler() in
3031 * any kernel, so the default scsi_done() assumes it is
3032 * not being called from the SCSI EH.
3033 */
3034 qc->scsidone = scsi_finish_command;
3035
3036 switch (qc->tf.protocol) {
3037
3038 case ATA_PROT_DMA:
3039 case ATA_PROT_ATAPI_DMA:
3040 host_stat = ap->ops->bmdma_status(ap);
3041
3042 /* before we do anything else, clear DMA-Start bit */
Alan Coxb73fc892005-08-26 16:03:19 +01003043 ap->ops->bmdma_stop(qc);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003044
3045 /* fall through */
3046
3047 default:
3048 ata_altstatus(ap);
3049 drv_stat = ata_chk_status(ap);
3050
3051 /* ack bmdma irq events */
3052 ap->ops->irq_clear(ap);
3053
3054 printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n",
3055 ap->id, qc->tf.command, drv_stat, host_stat);
3056
3057 /* complete taskfile transaction */
3058 ata_qc_complete(qc, drv_stat);
3059 break;
3060 }
Jeff Garzikb8f61532005-08-25 22:01:20 -04003061
3062 spin_unlock_irqrestore(&host_set->lock, flags);
3063
Linus Torvalds1da177e2005-04-16 15:20:36 -07003064out:
3065 DPRINTK("EXIT\n");
3066}
3067
3068/**
3069 * ata_eng_timeout - Handle timeout of queued command
3070 * @ap: Port on which timed-out command is active
3071 *
3072 * Some part of the kernel (currently, only the SCSI layer)
3073 * has noticed that the active command on port @ap has not
3074 * completed after a specified length of time. Handle this
3075 * condition by disabling DMA (if necessary) and completing
3076 * transactions, with error if necessary.
3077 *
3078 * This also handles the case of the "lost interrupt", where
3079 * for some reason (possibly hardware bug, possibly driver bug)
3080 * an interrupt was not delivered to the driver, even though the
3081 * transaction completed successfully.
3082 *
3083 * LOCKING:
3084 * Inherited from SCSI layer (none, can sleep)
3085 */
3086
3087void ata_eng_timeout(struct ata_port *ap)
3088{
3089 struct ata_queued_cmd *qc;
3090
3091 DPRINTK("ENTER\n");
3092
3093 qc = ata_qc_from_tag(ap, ap->active_tag);
3094 if (!qc) {
3095 printk(KERN_ERR "ata%u: BUG: timeout without command\n",
3096 ap->id);
3097 goto out;
3098 }
3099
3100 ata_qc_timeout(qc);
3101
3102out:
3103 DPRINTK("EXIT\n");
3104}
3105
3106/**
3107 * ata_qc_new - Request an available ATA command, for queueing
3108 * @ap: Port associated with device @dev
3109 * @dev: Device from whom we request an available command structure
3110 *
3111 * LOCKING:
Jeff Garzik0cba6322005-05-30 19:49:12 -04003112 * None.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003113 */
3114
3115static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
3116{
3117 struct ata_queued_cmd *qc = NULL;
3118 unsigned int i;
3119
3120 for (i = 0; i < ATA_MAX_QUEUE; i++)
3121 if (!test_and_set_bit(i, &ap->qactive)) {
3122 qc = ata_qc_from_tag(ap, i);
3123 break;
3124 }
3125
3126 if (qc)
3127 qc->tag = i;
3128
3129 return qc;
3130}
3131
3132/**
3133 * ata_qc_new_init - Request an available ATA command, and initialize it
3134 * @ap: Port associated with device @dev
3135 * @dev: Device from whom we request an available command structure
3136 *
3137 * LOCKING:
Jeff Garzik0cba6322005-05-30 19:49:12 -04003138 * None.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003139 */
3140
3141struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
3142 struct ata_device *dev)
3143{
3144 struct ata_queued_cmd *qc;
3145
3146 qc = ata_qc_new(ap);
3147 if (qc) {
3148 qc->sg = NULL;
3149 qc->flags = 0;
3150 qc->scsicmd = NULL;
3151 qc->ap = ap;
3152 qc->dev = dev;
3153 qc->cursect = qc->cursg = qc->cursg_ofs = 0;
3154 qc->nsect = 0;
3155 qc->nbytes = qc->curbytes = 0;
3156
3157 ata_tf_init(ap, &qc->tf, dev->devno);
3158
3159 if (dev->flags & ATA_DFLAG_LBA48)
3160 qc->tf.flags |= ATA_TFLAG_LBA48;
3161 }
3162
3163 return qc;
3164}
3165
3166static int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat)
3167{
3168 return 0;
3169}
3170
3171static void __ata_qc_complete(struct ata_queued_cmd *qc)
3172{
3173 struct ata_port *ap = qc->ap;
3174 unsigned int tag, do_clear = 0;
3175
3176 qc->flags = 0;
3177 tag = qc->tag;
3178 if (likely(ata_tag_valid(tag))) {
3179 if (tag == ap->active_tag)
3180 ap->active_tag = ATA_TAG_POISON;
3181 qc->tag = ATA_TAG_POISON;
3182 do_clear = 1;
3183 }
3184
3185 if (qc->waiting) {
3186 struct completion *waiting = qc->waiting;
3187 qc->waiting = NULL;
3188 complete(waiting);
3189 }
3190
3191 if (likely(do_clear))
3192 clear_bit(tag, &ap->qactive);
3193}
3194
3195/**
3196 * ata_qc_free - free unused ata_queued_cmd
3197 * @qc: Command to complete
3198 *
3199 * Designed to free unused ata_queued_cmd object
3200 * in case something prevents using it.
3201 *
3202 * LOCKING:
Jeff Garzik0cba6322005-05-30 19:49:12 -04003203 * spin_lock_irqsave(host_set lock)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003204 *
3205 */
3206void ata_qc_free(struct ata_queued_cmd *qc)
3207{
3208 assert(qc != NULL); /* ata_qc_from_tag _might_ return NULL */
3209 assert(qc->waiting == NULL); /* nothing should be waiting */
3210
3211 __ata_qc_complete(qc);
3212}
3213
3214/**
3215 * ata_qc_complete - Complete an active ATA command
3216 * @qc: Command to complete
Jeff Garzik0cba6322005-05-30 19:49:12 -04003217 * @drv_stat: ATA Status register contents
3218 *
3219 * Indicate to the mid and upper layers that an ATA
3220 * command has completed, with either an ok or not-ok status.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003221 *
3222 * LOCKING:
Jeff Garzik0cba6322005-05-30 19:49:12 -04003223 * spin_lock_irqsave(host_set lock)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003224 *
3225 */
3226
3227void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
3228{
3229 int rc;
3230
3231 assert(qc != NULL); /* ata_qc_from_tag _might_ return NULL */
3232 assert(qc->flags & ATA_QCFLAG_ACTIVE);
3233
3234 if (likely(qc->flags & ATA_QCFLAG_DMAMAP))
3235 ata_sg_clean(qc);
3236
Albert Lee3f3791d2005-08-16 14:25:38 +08003237 /* atapi: mark qc as inactive to prevent the interrupt handler
3238 * from completing the command twice later, before the error handler
3239 * is called. (when rc != 0 and atapi request sense is needed)
3240 */
3241 qc->flags &= ~ATA_QCFLAG_ACTIVE;
3242
Linus Torvalds1da177e2005-04-16 15:20:36 -07003243 /* call completion callback */
3244 rc = qc->complete_fn(qc, drv_stat);
3245
3246 /* if callback indicates not to complete command (non-zero),
3247 * return immediately
3248 */
3249 if (rc != 0)
3250 return;
3251
3252 __ata_qc_complete(qc);
3253
3254 VPRINTK("EXIT\n");
3255}
3256
3257static inline int ata_should_dma_map(struct ata_queued_cmd *qc)
3258{
3259 struct ata_port *ap = qc->ap;
3260
3261 switch (qc->tf.protocol) {
3262 case ATA_PROT_DMA:
3263 case ATA_PROT_ATAPI_DMA:
3264 return 1;
3265
3266 case ATA_PROT_ATAPI:
3267 case ATA_PROT_PIO:
3268 case ATA_PROT_PIO_MULT:
3269 if (ap->flags & ATA_FLAG_PIO_DMA)
3270 return 1;
3271
3272 /* fall through */
3273
3274 default:
3275 return 0;
3276 }
3277
3278 /* never reached */
3279}
3280
3281/**
3282 * ata_qc_issue - issue taskfile to device
3283 * @qc: command to issue to device
3284 *
3285 * Prepare an ATA command to submission to device.
3286 * This includes mapping the data into a DMA-able
3287 * area, filling in the S/G table, and finally
3288 * writing the taskfile to hardware, starting the command.
3289 *
3290 * LOCKING:
3291 * spin_lock_irqsave(host_set lock)
3292 *
3293 * RETURNS:
3294 * Zero on success, negative on error.
3295 */
3296
3297int ata_qc_issue(struct ata_queued_cmd *qc)
3298{
3299 struct ata_port *ap = qc->ap;
3300
3301 if (ata_should_dma_map(qc)) {
3302 if (qc->flags & ATA_QCFLAG_SG) {
3303 if (ata_sg_setup(qc))
3304 goto err_out;
3305 } else if (qc->flags & ATA_QCFLAG_SINGLE) {
3306 if (ata_sg_setup_one(qc))
3307 goto err_out;
3308 }
3309 } else {
3310 qc->flags &= ~ATA_QCFLAG_DMAMAP;
3311 }
3312
3313 ap->ops->qc_prep(qc);
3314
3315 qc->ap->active_tag = qc->tag;
3316 qc->flags |= ATA_QCFLAG_ACTIVE;
3317
3318 return ap->ops->qc_issue(qc);
3319
3320err_out:
3321 return -1;
3322}
3323
Edward Falk0baab862005-06-02 18:17:13 -04003324
Linus Torvalds1da177e2005-04-16 15:20:36 -07003325/**
3326 * ata_qc_issue_prot - issue taskfile to device in proto-dependent manner
3327 * @qc: command to issue to device
3328 *
3329 * Using various libata functions and hooks, this function
3330 * starts an ATA command. ATA commands are grouped into
3331 * classes called "protocols", and issuing each type of protocol
3332 * is slightly different.
3333 *
Edward Falk0baab862005-06-02 18:17:13 -04003334 * May be used as the qc_issue() entry in ata_port_operations.
3335 *
Linus Torvalds1da177e2005-04-16 15:20:36 -07003336 * LOCKING:
3337 * spin_lock_irqsave(host_set lock)
3338 *
3339 * RETURNS:
3340 * Zero on success, negative on error.
3341 */
3342
3343int ata_qc_issue_prot(struct ata_queued_cmd *qc)
3344{
3345 struct ata_port *ap = qc->ap;
3346
3347 ata_dev_select(ap, qc->dev->devno, 1, 0);
3348
3349 switch (qc->tf.protocol) {
3350 case ATA_PROT_NODATA:
3351 ata_tf_to_host_nolock(ap, &qc->tf);
3352 break;
3353
3354 case ATA_PROT_DMA:
3355 ap->ops->tf_load(ap, &qc->tf); /* load tf registers */
3356 ap->ops->bmdma_setup(qc); /* set up bmdma */
3357 ap->ops->bmdma_start(qc); /* initiate bmdma */
3358 break;
3359
3360 case ATA_PROT_PIO: /* load tf registers, initiate polling pio */
3361 ata_qc_set_polling(qc);
3362 ata_tf_to_host_nolock(ap, &qc->tf);
3363 ap->pio_task_state = PIO_ST;
3364 queue_work(ata_wq, &ap->pio_task);
3365 break;
3366
3367 case ATA_PROT_ATAPI:
3368 ata_qc_set_polling(qc);
3369 ata_tf_to_host_nolock(ap, &qc->tf);
3370 queue_work(ata_wq, &ap->packet_task);
3371 break;
3372
3373 case ATA_PROT_ATAPI_NODATA:
Tejun Heoc1389502005-08-22 14:59:24 +09003374 ap->flags |= ATA_FLAG_NOINTR;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003375 ata_tf_to_host_nolock(ap, &qc->tf);
3376 queue_work(ata_wq, &ap->packet_task);
3377 break;
3378
3379 case ATA_PROT_ATAPI_DMA:
Tejun Heoc1389502005-08-22 14:59:24 +09003380 ap->flags |= ATA_FLAG_NOINTR;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003381 ap->ops->tf_load(ap, &qc->tf); /* load tf registers */
3382 ap->ops->bmdma_setup(qc); /* set up bmdma */
3383 queue_work(ata_wq, &ap->packet_task);
3384 break;
3385
3386 default:
3387 WARN_ON(1);
3388 return -1;
3389 }
3390
3391 return 0;
3392}
3393
3394/**
Edward Falk0baab862005-06-02 18:17:13 -04003395 * ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction
Linus Torvalds1da177e2005-04-16 15:20:36 -07003396 * @qc: Info associated with this ATA transaction.
3397 *
3398 * LOCKING:
3399 * spin_lock_irqsave(host_set lock)
3400 */
3401
3402static void ata_bmdma_setup_mmio (struct ata_queued_cmd *qc)
3403{
3404 struct ata_port *ap = qc->ap;
3405 unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
3406 u8 dmactl;
3407 void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
3408
3409 /* load PRD table addr. */
3410 mb(); /* make sure PRD table writes are visible to controller */
3411 writel(ap->prd_dma, mmio + ATA_DMA_TABLE_OFS);
3412
3413 /* specify data direction, triple-check start bit is clear */
3414 dmactl = readb(mmio + ATA_DMA_CMD);
3415 dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
3416 if (!rw)
3417 dmactl |= ATA_DMA_WR;
3418 writeb(dmactl, mmio + ATA_DMA_CMD);
3419
3420 /* issue r/w command */
3421 ap->ops->exec_command(ap, &qc->tf);
3422}
3423
3424/**
Alan Coxb73fc892005-08-26 16:03:19 +01003425 * ata_bmdma_start_mmio - Start a PCI IDE BMDMA transaction
Linus Torvalds1da177e2005-04-16 15:20:36 -07003426 * @qc: Info associated with this ATA transaction.
3427 *
3428 * LOCKING:
3429 * spin_lock_irqsave(host_set lock)
3430 */
3431
3432static void ata_bmdma_start_mmio (struct ata_queued_cmd *qc)
3433{
3434 struct ata_port *ap = qc->ap;
3435 void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
3436 u8 dmactl;
3437
3438 /* start host DMA transaction */
3439 dmactl = readb(mmio + ATA_DMA_CMD);
3440 writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD);
3441
3442 /* Strictly, one may wish to issue a readb() here, to
3443 * flush the mmio write. However, control also passes
3444 * to the hardware at this point, and it will interrupt
3445 * us when we are to resume control. So, in effect,
3446 * we don't care when the mmio write flushes.
3447 * Further, a read of the DMA status register _immediately_
3448 * following the write may not be what certain flaky hardware
3449 * is expected, so I think it is best to not add a readb()
3450 * without first all the MMIO ATA cards/mobos.
3451 * Or maybe I'm just being paranoid.
3452 */
3453}
3454
3455/**
3456 * ata_bmdma_setup_pio - Set up PCI IDE BMDMA transaction (PIO)
3457 * @qc: Info associated with this ATA transaction.
3458 *
3459 * LOCKING:
3460 * spin_lock_irqsave(host_set lock)
3461 */
3462
3463static void ata_bmdma_setup_pio (struct ata_queued_cmd *qc)
3464{
3465 struct ata_port *ap = qc->ap;
3466 unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
3467 u8 dmactl;
3468
3469 /* load PRD table addr. */
3470 outl(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS);
3471
3472 /* specify data direction, triple-check start bit is clear */
3473 dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
3474 dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
3475 if (!rw)
3476 dmactl |= ATA_DMA_WR;
3477 outb(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
3478
3479 /* issue r/w command */
3480 ap->ops->exec_command(ap, &qc->tf);
3481}
3482
3483/**
3484 * ata_bmdma_start_pio - Start a PCI IDE BMDMA transaction (PIO)
3485 * @qc: Info associated with this ATA transaction.
3486 *
3487 * LOCKING:
3488 * spin_lock_irqsave(host_set lock)
3489 */
3490
3491static void ata_bmdma_start_pio (struct ata_queued_cmd *qc)
3492{
3493 struct ata_port *ap = qc->ap;
3494 u8 dmactl;
3495
3496 /* start host DMA transaction */
3497 dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
3498 outb(dmactl | ATA_DMA_START,
3499 ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
3500}
3501
Edward Falk0baab862005-06-02 18:17:13 -04003502
3503/**
3504 * ata_bmdma_start - Start a PCI IDE BMDMA transaction
3505 * @qc: Info associated with this ATA transaction.
3506 *
3507 * Writes the ATA_DMA_START flag to the DMA command register.
3508 *
3509 * May be used as the bmdma_start() entry in ata_port_operations.
3510 *
3511 * LOCKING:
3512 * spin_lock_irqsave(host_set lock)
3513 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07003514void ata_bmdma_start(struct ata_queued_cmd *qc)
3515{
3516 if (qc->ap->flags & ATA_FLAG_MMIO)
3517 ata_bmdma_start_mmio(qc);
3518 else
3519 ata_bmdma_start_pio(qc);
3520}
3521
Edward Falk0baab862005-06-02 18:17:13 -04003522
3523/**
3524 * ata_bmdma_setup - Set up PCI IDE BMDMA transaction
3525 * @qc: Info associated with this ATA transaction.
3526 *
3527 * Writes address of PRD table to device's PRD Table Address
3528 * register, sets the DMA control register, and calls
3529 * ops->exec_command() to start the transfer.
3530 *
3531 * May be used as the bmdma_setup() entry in ata_port_operations.
3532 *
3533 * LOCKING:
3534 * spin_lock_irqsave(host_set lock)
3535 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07003536void ata_bmdma_setup(struct ata_queued_cmd *qc)
3537{
3538 if (qc->ap->flags & ATA_FLAG_MMIO)
3539 ata_bmdma_setup_mmio(qc);
3540 else
3541 ata_bmdma_setup_pio(qc);
3542}
3543
Edward Falk0baab862005-06-02 18:17:13 -04003544
3545/**
3546 * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
Jeff Garzikdecc6d02005-06-02 18:42:33 -04003547 * @ap: Port associated with this ATA transaction.
Edward Falk0baab862005-06-02 18:17:13 -04003548 *
3549 * Clear interrupt and error flags in DMA status register.
3550 *
3551 * May be used as the irq_clear() entry in ata_port_operations.
3552 *
3553 * LOCKING:
3554 * spin_lock_irqsave(host_set lock)
3555 */
3556
Linus Torvalds1da177e2005-04-16 15:20:36 -07003557void ata_bmdma_irq_clear(struct ata_port *ap)
3558{
3559 if (ap->flags & ATA_FLAG_MMIO) {
3560 void __iomem *mmio = ((void __iomem *) ap->ioaddr.bmdma_addr) + ATA_DMA_STATUS;
3561 writeb(readb(mmio), mmio);
3562 } else {
3563 unsigned long addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS;
3564 outb(inb(addr), addr);
3565 }
3566
3567}
3568
Edward Falk0baab862005-06-02 18:17:13 -04003569
3570/**
3571 * ata_bmdma_status - Read PCI IDE BMDMA status
Jeff Garzikdecc6d02005-06-02 18:42:33 -04003572 * @ap: Port associated with this ATA transaction.
Edward Falk0baab862005-06-02 18:17:13 -04003573 *
3574 * Read and return BMDMA status register.
3575 *
3576 * May be used as the bmdma_status() entry in ata_port_operations.
3577 *
3578 * LOCKING:
3579 * spin_lock_irqsave(host_set lock)
3580 */
3581
Linus Torvalds1da177e2005-04-16 15:20:36 -07003582u8 ata_bmdma_status(struct ata_port *ap)
3583{
3584 u8 host_stat;
3585 if (ap->flags & ATA_FLAG_MMIO) {
3586 void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
3587 host_stat = readb(mmio + ATA_DMA_STATUS);
3588 } else
Albert Leeee500aa2005-09-27 17:34:38 +08003589 host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003590 return host_stat;
3591}
3592
Edward Falk0baab862005-06-02 18:17:13 -04003593
3594/**
3595 * ata_bmdma_stop - Stop PCI IDE BMDMA transfer
Alan Coxb73fc892005-08-26 16:03:19 +01003596 * @qc: Command we are ending DMA for
Edward Falk0baab862005-06-02 18:17:13 -04003597 *
3598 * Clears the ATA_DMA_START flag in the dma control register
3599 *
3600 * May be used as the bmdma_stop() entry in ata_port_operations.
3601 *
3602 * LOCKING:
3603 * spin_lock_irqsave(host_set lock)
3604 */
3605
Alan Coxb73fc892005-08-26 16:03:19 +01003606void ata_bmdma_stop(struct ata_queued_cmd *qc)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003607{
Alan Coxb73fc892005-08-26 16:03:19 +01003608 struct ata_port *ap = qc->ap;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003609 if (ap->flags & ATA_FLAG_MMIO) {
3610 void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
3611
3612 /* clear start/stop bit */
3613 writeb(readb(mmio + ATA_DMA_CMD) & ~ATA_DMA_START,
3614 mmio + ATA_DMA_CMD);
3615 } else {
3616 /* clear start/stop bit */
3617 outb(inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD) & ~ATA_DMA_START,
3618 ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
3619 }
3620
3621 /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
3622 ata_altstatus(ap); /* dummy read */
3623}
3624
3625/**
3626 * ata_host_intr - Handle host interrupt for given (port, task)
3627 * @ap: Port on which interrupt arrived (possibly...)
3628 * @qc: Taskfile currently active in engine
3629 *
3630 * Handle host interrupt for given queued command. Currently,
3631 * only DMA interrupts are handled. All other commands are
3632 * handled via polling with interrupts disabled (nIEN bit).
3633 *
3634 * LOCKING:
3635 * spin_lock_irqsave(host_set lock)
3636 *
3637 * RETURNS:
3638 * One if interrupt was handled, zero if not (shared irq).
3639 */
3640
3641inline unsigned int ata_host_intr (struct ata_port *ap,
3642 struct ata_queued_cmd *qc)
3643{
3644 u8 status, host_stat;
3645
3646 switch (qc->tf.protocol) {
3647
3648 case ATA_PROT_DMA:
3649 case ATA_PROT_ATAPI_DMA:
3650 case ATA_PROT_ATAPI:
3651 /* check status of DMA engine */
3652 host_stat = ap->ops->bmdma_status(ap);
3653 VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat);
3654
3655 /* if it's not our irq... */
3656 if (!(host_stat & ATA_DMA_INTR))
3657 goto idle_irq;
3658
3659 /* before we do anything else, clear DMA-Start bit */
Alan Coxb73fc892005-08-26 16:03:19 +01003660 ap->ops->bmdma_stop(qc);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003661
3662 /* fall through */
3663
3664 case ATA_PROT_ATAPI_NODATA:
3665 case ATA_PROT_NODATA:
3666 /* check altstatus */
3667 status = ata_altstatus(ap);
3668 if (status & ATA_BUSY)
3669 goto idle_irq;
3670
3671 /* check main status, clearing INTRQ */
3672 status = ata_chk_status(ap);
3673 if (unlikely(status & ATA_BUSY))
3674 goto idle_irq;
3675 DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
3676 ap->id, qc->tf.protocol, status);
3677
3678 /* ack bmdma irq events */
3679 ap->ops->irq_clear(ap);
3680
3681 /* complete taskfile transaction */
3682 ata_qc_complete(qc, status);
3683 break;
3684
3685 default:
3686 goto idle_irq;
3687 }
3688
3689 return 1; /* irq handled */
3690
3691idle_irq:
3692 ap->stats.idle_irq++;
3693
3694#ifdef ATA_IRQ_TRAP
3695 if ((ap->stats.idle_irq % 1000) == 0) {
3696 handled = 1;
3697 ata_irq_ack(ap, 0); /* debug trap */
3698 printk(KERN_WARNING "ata%d: irq trap\n", ap->id);
3699 }
3700#endif
3701 return 0; /* irq not handled */
3702}
3703
3704/**
3705 * ata_interrupt - Default ATA host interrupt handler
Jeff Garzik0cba6322005-05-30 19:49:12 -04003706 * @irq: irq line (unused)
3707 * @dev_instance: pointer to our ata_host_set information structure
Linus Torvalds1da177e2005-04-16 15:20:36 -07003708 * @regs: unused
3709 *
Jeff Garzik0cba6322005-05-30 19:49:12 -04003710 * Default interrupt handler for PCI IDE devices. Calls
3711 * ata_host_intr() for each port that is not disabled.
3712 *
Linus Torvalds1da177e2005-04-16 15:20:36 -07003713 * LOCKING:
Jeff Garzik0cba6322005-05-30 19:49:12 -04003714 * Obtains host_set lock during operation.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003715 *
3716 * RETURNS:
Jeff Garzik0cba6322005-05-30 19:49:12 -04003717 * IRQ_NONE or IRQ_HANDLED.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003718 *
3719 */
3720
3721irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
3722{
3723 struct ata_host_set *host_set = dev_instance;
3724 unsigned int i;
3725 unsigned int handled = 0;
3726 unsigned long flags;
3727
3728 /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */
3729 spin_lock_irqsave(&host_set->lock, flags);
3730
3731 for (i = 0; i < host_set->n_ports; i++) {
3732 struct ata_port *ap;
3733
3734 ap = host_set->ports[i];
Tejun Heoc1389502005-08-22 14:59:24 +09003735 if (ap &&
3736 !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07003737 struct ata_queued_cmd *qc;
3738
3739 qc = ata_qc_from_tag(ap, ap->active_tag);
Albert Lee21b1ed72005-04-29 17:34:59 +08003740 if (qc && (!(qc->tf.ctl & ATA_NIEN)) &&
3741 (qc->flags & ATA_QCFLAG_ACTIVE))
Linus Torvalds1da177e2005-04-16 15:20:36 -07003742 handled |= ata_host_intr(ap, qc);
3743 }
3744 }
3745
3746 spin_unlock_irqrestore(&host_set->lock, flags);
3747
3748 return IRQ_RETVAL(handled);
3749}
3750
3751/**
3752 * atapi_packet_task - Write CDB bytes to hardware
3753 * @_data: Port to which ATAPI device is attached.
3754 *
3755 * When device has indicated its readiness to accept
3756 * a CDB, this function is called. Send the CDB.
3757 * If DMA is to be performed, exit immediately.
3758 * Otherwise, we are in polling mode, so poll
3759 * status under operation succeeds or fails.
3760 *
3761 * LOCKING:
3762 * Kernel thread context (may sleep)
3763 */
3764
3765static void atapi_packet_task(void *_data)
3766{
3767 struct ata_port *ap = _data;
3768 struct ata_queued_cmd *qc;
3769 u8 status;
3770
3771 qc = ata_qc_from_tag(ap, ap->active_tag);
3772 assert(qc != NULL);
3773 assert(qc->flags & ATA_QCFLAG_ACTIVE);
3774
3775 /* sleep-wait for BSY to clear */
3776 DPRINTK("busy wait\n");
3777 if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB))
3778 goto err_out;
3779
3780 /* make sure DRQ is set */
3781 status = ata_chk_status(ap);
3782 if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ)
3783 goto err_out;
3784
3785 /* send SCSI cdb */
3786 DPRINTK("send cdb\n");
3787 assert(ap->cdb_len >= 12);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003788
Tejun Heoc1389502005-08-22 14:59:24 +09003789 if (qc->tf.protocol == ATA_PROT_ATAPI_DMA ||
3790 qc->tf.protocol == ATA_PROT_ATAPI_NODATA) {
3791 unsigned long flags;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003792
Tejun Heoc1389502005-08-22 14:59:24 +09003793 /* Once we're done issuing command and kicking bmdma,
3794 * irq handler takes over. To not lose irq, we need
3795 * to clear NOINTR flag before sending cdb, but
3796 * interrupt handler shouldn't be invoked before we're
3797 * finished. Hence, the following locking.
3798 */
3799 spin_lock_irqsave(&ap->host_set->lock, flags);
3800 ap->flags &= ~ATA_FLAG_NOINTR;
3801 ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1);
3802 if (qc->tf.protocol == ATA_PROT_ATAPI_DMA)
3803 ap->ops->bmdma_start(qc); /* initiate bmdma */
3804 spin_unlock_irqrestore(&ap->host_set->lock, flags);
3805 } else {
3806 ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003807
Tejun Heoc1389502005-08-22 14:59:24 +09003808 /* PIO commands are handled by polling */
Linus Torvalds1da177e2005-04-16 15:20:36 -07003809 ap->pio_task_state = PIO_ST;
3810 queue_work(ata_wq, &ap->pio_task);
3811 }
3812
3813 return;
3814
3815err_out:
Tejun Heo40e8c822005-08-22 17:12:45 +09003816 ata_poll_qc_complete(qc, ATA_ERR);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003817}
3818
Edward Falk0baab862005-06-02 18:17:13 -04003819
3820/**
3821 * ata_port_start - Set port up for dma.
3822 * @ap: Port to initialize
3823 *
3824 * Called just after data structures for each port are
3825 * initialized. Allocates space for PRD table.
3826 *
3827 * May be used as the port_start() entry in ata_port_operations.
3828 *
3829 * LOCKING:
3830 */
3831
Linus Torvalds1da177e2005-04-16 15:20:36 -07003832int ata_port_start (struct ata_port *ap)
3833{
3834 struct device *dev = ap->host_set->dev;
3835
3836 ap->prd = dma_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma, GFP_KERNEL);
3837 if (!ap->prd)
3838 return -ENOMEM;
3839
3840 DPRINTK("prd alloc, virt %p, dma %llx\n", ap->prd, (unsigned long long) ap->prd_dma);
3841
3842 return 0;
3843}
3844
Edward Falk0baab862005-06-02 18:17:13 -04003845
3846/**
3847 * ata_port_stop - Undo ata_port_start()
3848 * @ap: Port to shut down
3849 *
3850 * Frees the PRD table.
3851 *
3852 * May be used as the port_stop() entry in ata_port_operations.
3853 *
3854 * LOCKING:
3855 */
3856
Linus Torvalds1da177e2005-04-16 15:20:36 -07003857void ata_port_stop (struct ata_port *ap)
3858{
3859 struct device *dev = ap->host_set->dev;
3860
3861 dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma);
3862}
3863
Jeff Garzikaa8f0dc2005-05-26 21:54:27 -04003864void ata_host_stop (struct ata_host_set *host_set)
3865{
3866 if (host_set->mmio_base)
3867 iounmap(host_set->mmio_base);
3868}
3869
3870
Linus Torvalds1da177e2005-04-16 15:20:36 -07003871/**
3872 * ata_host_remove - Unregister SCSI host structure with upper layers
3873 * @ap: Port to unregister
3874 * @do_unregister: 1 if we fully unregister, 0 to just stop the port
3875 *
3876 * LOCKING:
3877 */
3878
3879static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister)
3880{
3881 struct Scsi_Host *sh = ap->host;
3882
3883 DPRINTK("ENTER\n");
3884
3885 if (do_unregister)
3886 scsi_remove_host(sh);
3887
3888 ap->ops->port_stop(ap);
3889}
3890
3891/**
3892 * ata_host_init - Initialize an ata_port structure
3893 * @ap: Structure to initialize
3894 * @host: associated SCSI mid-layer structure
3895 * @host_set: Collection of hosts to which @ap belongs
3896 * @ent: Probe information provided by low-level driver
3897 * @port_no: Port number associated with this ata_port
3898 *
Jeff Garzik0cba6322005-05-30 19:49:12 -04003899 * Initialize a new ata_port structure, and its associated
3900 * scsi_host.
3901 *
Linus Torvalds1da177e2005-04-16 15:20:36 -07003902 * LOCKING:
Jeff Garzik0cba6322005-05-30 19:49:12 -04003903 * Inherited from caller.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003904 *
3905 */
3906
3907static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
3908 struct ata_host_set *host_set,
3909 struct ata_probe_ent *ent, unsigned int port_no)
3910{
3911 unsigned int i;
3912
3913 host->max_id = 16;
3914 host->max_lun = 1;
3915 host->max_channel = 1;
3916 host->unique_id = ata_unique_id++;
3917 host->max_cmd_len = 12;
Christoph Hellwig12413192005-06-11 01:05:01 +02003918
Linus Torvalds1da177e2005-04-16 15:20:36 -07003919 scsi_assign_lock(host, &host_set->lock);
3920
3921 ap->flags = ATA_FLAG_PORT_DISABLED;
3922 ap->id = host->unique_id;
3923 ap->host = host;
3924 ap->ctl = ATA_DEVCTL_OBS;
3925 ap->host_set = host_set;
3926 ap->port_no = port_no;
3927 ap->hard_port_no =
3928 ent->legacy_mode ? ent->hard_port_no : port_no;
3929 ap->pio_mask = ent->pio_mask;
3930 ap->mwdma_mask = ent->mwdma_mask;
3931 ap->udma_mask = ent->udma_mask;
3932 ap->flags |= ent->host_flags;
3933 ap->ops = ent->port_ops;
3934 ap->cbl = ATA_CBL_NONE;
3935 ap->active_tag = ATA_TAG_POISON;
3936 ap->last_ctl = 0xFF;
3937
3938 INIT_WORK(&ap->packet_task, atapi_packet_task, ap);
3939 INIT_WORK(&ap->pio_task, ata_pio_task, ap);
3940
3941 for (i = 0; i < ATA_MAX_DEVICES; i++)
3942 ap->device[i].devno = i;
3943
3944#ifdef ATA_IRQ_TRAP
3945 ap->stats.unhandled_irq = 1;
3946 ap->stats.idle_irq = 1;
3947#endif
3948
3949 memcpy(&ap->ioaddr, &ent->port[port_no], sizeof(struct ata_ioports));
3950}
3951
3952/**
3953 * ata_host_add - Attach low-level ATA driver to system
3954 * @ent: Information provided by low-level driver
3955 * @host_set: Collections of ports to which we add
3956 * @port_no: Port number associated with this host
3957 *
Jeff Garzik0cba6322005-05-30 19:49:12 -04003958 * Attach low-level ATA driver to system.
3959 *
Linus Torvalds1da177e2005-04-16 15:20:36 -07003960 * LOCKING:
Jeff Garzik0cba6322005-05-30 19:49:12 -04003961 * PCI/etc. bus probe sem.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003962 *
3963 * RETURNS:
Jeff Garzik0cba6322005-05-30 19:49:12 -04003964 * New ata_port on success, for NULL on error.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003965 *
3966 */
3967
3968static struct ata_port * ata_host_add(struct ata_probe_ent *ent,
3969 struct ata_host_set *host_set,
3970 unsigned int port_no)
3971{
3972 struct Scsi_Host *host;
3973 struct ata_port *ap;
3974 int rc;
3975
3976 DPRINTK("ENTER\n");
3977 host = scsi_host_alloc(ent->sht, sizeof(struct ata_port));
3978 if (!host)
3979 return NULL;
3980
3981 ap = (struct ata_port *) &host->hostdata[0];
3982
3983 ata_host_init(ap, host, host_set, ent, port_no);
3984
3985 rc = ap->ops->port_start(ap);
3986 if (rc)
3987 goto err_out;
3988
3989 return ap;
3990
3991err_out:
3992 scsi_host_put(host);
3993 return NULL;
3994}
3995
3996/**
Jeff Garzik0cba6322005-05-30 19:49:12 -04003997 * ata_device_add - Register hardware device with ATA and SCSI layers
3998 * @ent: Probe information describing hardware device to be registered
3999 *
4000 * This function processes the information provided in the probe
4001 * information struct @ent, allocates the necessary ATA and SCSI
4002 * host information structures, initializes them, and registers
4003 * everything with requisite kernel subsystems.
4004 *
4005 * This function requests irqs, probes the ATA bus, and probes
4006 * the SCSI bus.
Linus Torvalds1da177e2005-04-16 15:20:36 -07004007 *
4008 * LOCKING:
Jeff Garzik0cba6322005-05-30 19:49:12 -04004009 * PCI/etc. bus probe sem.
Linus Torvalds1da177e2005-04-16 15:20:36 -07004010 *
4011 * RETURNS:
Jeff Garzik0cba6322005-05-30 19:49:12 -04004012 * Number of ports registered. Zero on error (no ports registered).
Linus Torvalds1da177e2005-04-16 15:20:36 -07004013 *
4014 */
4015
4016int ata_device_add(struct ata_probe_ent *ent)
4017{
4018 unsigned int count = 0, i;
4019 struct device *dev = ent->dev;
4020 struct ata_host_set *host_set;
4021
4022 DPRINTK("ENTER\n");
4023 /* alloc a container for our list of ATA ports (buses) */
4024 host_set = kmalloc(sizeof(struct ata_host_set) +
4025 (ent->n_ports * sizeof(void *)), GFP_KERNEL);
4026 if (!host_set)
4027 return 0;
4028 memset(host_set, 0, sizeof(struct ata_host_set) + (ent->n_ports * sizeof(void *)));
4029 spin_lock_init(&host_set->lock);
4030
4031 host_set->dev = dev;
4032 host_set->n_ports = ent->n_ports;
4033 host_set->irq = ent->irq;
4034 host_set->mmio_base = ent->mmio_base;
4035 host_set->private_data = ent->private_data;
4036 host_set->ops = ent->port_ops;
4037
4038 /* register each port bound to this device */
4039 for (i = 0; i < ent->n_ports; i++) {
4040 struct ata_port *ap;
4041 unsigned long xfer_mode_mask;
4042
4043 ap = ata_host_add(ent, host_set, i);
4044 if (!ap)
4045 goto err_out;
4046
4047 host_set->ports[i] = ap;
4048 xfer_mode_mask =(ap->udma_mask << ATA_SHIFT_UDMA) |
4049 (ap->mwdma_mask << ATA_SHIFT_MWDMA) |
4050 (ap->pio_mask << ATA_SHIFT_PIO);
4051
4052 /* print per-port info to dmesg */
4053 printk(KERN_INFO "ata%u: %cATA max %s cmd 0x%lX ctl 0x%lX "
4054 "bmdma 0x%lX irq %lu\n",
4055 ap->id,
4056 ap->flags & ATA_FLAG_SATA ? 'S' : 'P',
4057 ata_mode_string(xfer_mode_mask),
4058 ap->ioaddr.cmd_addr,
4059 ap->ioaddr.ctl_addr,
4060 ap->ioaddr.bmdma_addr,
4061 ent->irq);
4062
4063 ata_chk_status(ap);
4064 host_set->ops->irq_clear(ap);
4065 count++;
4066 }
4067
4068 if (!count) {
4069 kfree(host_set);
4070 return 0;
4071 }
4072
4073 /* obtain irq, that is shared between channels */
4074 if (request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags,
4075 DRV_NAME, host_set))
4076 goto err_out;
4077
4078 /* perform each probe synchronously */
4079 DPRINTK("probe begin\n");
4080 for (i = 0; i < count; i++) {
4081 struct ata_port *ap;
4082 int rc;
4083
4084 ap = host_set->ports[i];
4085
4086 DPRINTK("ata%u: probe begin\n", ap->id);
4087 rc = ata_bus_probe(ap);
4088 DPRINTK("ata%u: probe end\n", ap->id);
4089
4090 if (rc) {
4091 /* FIXME: do something useful here?
4092 * Current libata behavior will
4093 * tear down everything when
4094 * the module is removed
4095 * or the h/w is unplugged.
4096 */
4097 }
4098
4099 rc = scsi_add_host(ap->host, dev);
4100 if (rc) {
4101 printk(KERN_ERR "ata%u: scsi_add_host failed\n",
4102 ap->id);
4103 /* FIXME: do something useful here */
4104 /* FIXME: handle unconditional calls to
4105 * scsi_scan_host and ata_host_remove, below,
4106 * at the very least
4107 */
4108 }
4109 }
4110
4111 /* probes are done, now scan each port's disk(s) */
4112 DPRINTK("probe begin\n");
4113 for (i = 0; i < count; i++) {
4114 struct ata_port *ap = host_set->ports[i];
4115
4116 scsi_scan_host(ap->host);
4117 }
4118
4119 dev_set_drvdata(dev, host_set);
4120
4121 VPRINTK("EXIT, returning %u\n", ent->n_ports);
4122 return ent->n_ports; /* success */
4123
4124err_out:
4125 for (i = 0; i < count; i++) {
4126 ata_host_remove(host_set->ports[i], 1);
4127 scsi_host_put(host_set->ports[i]->host);
4128 }
4129 kfree(host_set);
4130 VPRINTK("EXIT, returning 0\n");
4131 return 0;
4132}
4133
4134/**
Alan Cox17b14452005-09-15 15:44:00 +01004135 * ata_host_set_remove - PCI layer callback for device removal
4136 * @host_set: ATA host set that was removed
4137 *
4138 * Unregister all objects associated with this host set. Free those
4139 * objects.
4140 *
4141 * LOCKING:
4142 * Inherited from calling layer (may sleep).
4143 */
4144
4145
4146void ata_host_set_remove(struct ata_host_set *host_set)
4147{
4148 struct ata_port *ap;
4149 unsigned int i;
4150
4151 for (i = 0; i < host_set->n_ports; i++) {
4152 ap = host_set->ports[i];
4153 scsi_remove_host(ap->host);
4154 }
4155
4156 free_irq(host_set->irq, host_set);
4157
4158 for (i = 0; i < host_set->n_ports; i++) {
4159 ap = host_set->ports[i];
4160
4161 ata_scsi_release(ap->host);
4162
4163 if ((ap->flags & ATA_FLAG_NO_LEGACY) == 0) {
4164 struct ata_ioports *ioaddr = &ap->ioaddr;
4165
4166 if (ioaddr->cmd_addr == 0x1f0)
4167 release_region(0x1f0, 8);
4168 else if (ioaddr->cmd_addr == 0x170)
4169 release_region(0x170, 8);
4170 }
4171
4172 scsi_host_put(ap->host);
4173 }
4174
4175 if (host_set->ops->host_stop)
4176 host_set->ops->host_stop(host_set);
4177
4178 kfree(host_set);
4179}
4180
4181/**
Linus Torvalds1da177e2005-04-16 15:20:36 -07004182 * ata_scsi_release - SCSI layer callback hook for host unload
4183 * @host: libata host to be unloaded
4184 *
4185 * Performs all duties necessary to shut down a libata port...
4186 * Kill port kthread, disable port, and release resources.
4187 *
4188 * LOCKING:
4189 * Inherited from SCSI layer.
4190 *
4191 * RETURNS:
4192 * One.
4193 */
4194
4195int ata_scsi_release(struct Scsi_Host *host)
4196{
4197 struct ata_port *ap = (struct ata_port *) &host->hostdata[0];
4198
4199 DPRINTK("ENTER\n");
4200
4201 ap->ops->port_disable(ap);
4202 ata_host_remove(ap, 0);
4203
4204 DPRINTK("EXIT\n");
4205 return 1;
4206}
4207
4208/**
4209 * ata_std_ports - initialize ioaddr with standard port offsets.
4210 * @ioaddr: IO address structure to be initialized
Edward Falk0baab862005-06-02 18:17:13 -04004211 *
4212 * Utility function which initializes data_addr, error_addr,
4213 * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr,
4214 * device_addr, status_addr, and command_addr to standard offsets
4215 * relative to cmd_addr.
4216 *
4217 * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr.
Linus Torvalds1da177e2005-04-16 15:20:36 -07004218 */
Edward Falk0baab862005-06-02 18:17:13 -04004219
Linus Torvalds1da177e2005-04-16 15:20:36 -07004220void ata_std_ports(struct ata_ioports *ioaddr)
4221{
4222 ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA;
4223 ioaddr->error_addr = ioaddr->cmd_addr + ATA_REG_ERR;
4224 ioaddr->feature_addr = ioaddr->cmd_addr + ATA_REG_FEATURE;
4225 ioaddr->nsect_addr = ioaddr->cmd_addr + ATA_REG_NSECT;
4226 ioaddr->lbal_addr = ioaddr->cmd_addr + ATA_REG_LBAL;
4227 ioaddr->lbam_addr = ioaddr->cmd_addr + ATA_REG_LBAM;
4228 ioaddr->lbah_addr = ioaddr->cmd_addr + ATA_REG_LBAH;
4229 ioaddr->device_addr = ioaddr->cmd_addr + ATA_REG_DEVICE;
4230 ioaddr->status_addr = ioaddr->cmd_addr + ATA_REG_STATUS;
4231 ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD;
4232}
4233
4234static struct ata_probe_ent *
4235ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port)
4236{
4237 struct ata_probe_ent *probe_ent;
4238
4239 probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
4240 if (!probe_ent) {
4241 printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
4242 kobject_name(&(dev->kobj)));
4243 return NULL;
4244 }
4245
4246 memset(probe_ent, 0, sizeof(*probe_ent));
4247
4248 INIT_LIST_HEAD(&probe_ent->node);
4249 probe_ent->dev = dev;
4250
4251 probe_ent->sht = port->sht;
4252 probe_ent->host_flags = port->host_flags;
4253 probe_ent->pio_mask = port->pio_mask;
4254 probe_ent->mwdma_mask = port->mwdma_mask;
4255 probe_ent->udma_mask = port->udma_mask;
4256 probe_ent->port_ops = port->port_ops;
4257
4258 return probe_ent;
4259}
4260
Edward Falk0baab862005-06-02 18:17:13 -04004261
4262
Jeff Garzik374b1872005-08-30 05:42:52 -04004263#ifdef CONFIG_PCI
4264
4265void ata_pci_host_stop (struct ata_host_set *host_set)
4266{
4267 struct pci_dev *pdev = to_pci_dev(host_set->dev);
4268
4269 pci_iounmap(pdev, host_set->mmio_base);
4270}
4271
Edward Falk0baab862005-06-02 18:17:13 -04004272/**
4273 * ata_pci_init_native_mode - Initialize native-mode driver
4274 * @pdev: pci device to be initialized
4275 * @port: array[2] of pointers to port info structures.
4276 *
4277 * Utility function which allocates and initializes an
4278 * ata_probe_ent structure for a standard dual-port
4279 * PIO-based IDE controller. The returned ata_probe_ent
4280 * structure can be passed to ata_device_add(). The returned
4281 * ata_probe_ent structure should then be freed with kfree().
4282 */
4283
Linus Torvalds1da177e2005-04-16 15:20:36 -07004284struct ata_probe_ent *
4285ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port)
4286{
4287 struct ata_probe_ent *probe_ent =
4288 ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
4289 if (!probe_ent)
4290 return NULL;
4291
4292 probe_ent->n_ports = 2;
4293 probe_ent->irq = pdev->irq;
4294 probe_ent->irq_flags = SA_SHIRQ;
4295
4296 probe_ent->port[0].cmd_addr = pci_resource_start(pdev, 0);
4297 probe_ent->port[0].altstatus_addr =
4298 probe_ent->port[0].ctl_addr =
4299 pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
4300 probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4);
4301
4302 probe_ent->port[1].cmd_addr = pci_resource_start(pdev, 2);
4303 probe_ent->port[1].altstatus_addr =
4304 probe_ent->port[1].ctl_addr =
4305 pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS;
4306 probe_ent->port[1].bmdma_addr = pci_resource_start(pdev, 4) + 8;
4307
4308 ata_std_ports(&probe_ent->port[0]);
4309 ata_std_ports(&probe_ent->port[1]);
4310
4311 return probe_ent;
4312}
4313
4314static struct ata_probe_ent *
4315ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port,
4316 struct ata_probe_ent **ppe2)
4317{
4318 struct ata_probe_ent *probe_ent, *probe_ent2;
4319
4320 probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
4321 if (!probe_ent)
4322 return NULL;
4323 probe_ent2 = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[1]);
4324 if (!probe_ent2) {
4325 kfree(probe_ent);
4326 return NULL;
4327 }
4328
4329 probe_ent->n_ports = 1;
4330 probe_ent->irq = 14;
4331
4332 probe_ent->hard_port_no = 0;
4333 probe_ent->legacy_mode = 1;
4334
4335 probe_ent2->n_ports = 1;
4336 probe_ent2->irq = 15;
4337
4338 probe_ent2->hard_port_no = 1;
4339 probe_ent2->legacy_mode = 1;
4340
4341 probe_ent->port[0].cmd_addr = 0x1f0;
4342 probe_ent->port[0].altstatus_addr =
4343 probe_ent->port[0].ctl_addr = 0x3f6;
4344 probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4);
4345
4346 probe_ent2->port[0].cmd_addr = 0x170;
4347 probe_ent2->port[0].altstatus_addr =
4348 probe_ent2->port[0].ctl_addr = 0x376;
4349 probe_ent2->port[0].bmdma_addr = pci_resource_start(pdev, 4)+8;
4350
4351 ata_std_ports(&probe_ent->port[0]);
4352 ata_std_ports(&probe_ent2->port[0]);
4353
4354 *ppe2 = probe_ent2;
4355 return probe_ent;
4356}
4357
4358/**
4359 * ata_pci_init_one - Initialize/register PCI IDE host controller
4360 * @pdev: Controller to be initialized
4361 * @port_info: Information from low-level host driver
4362 * @n_ports: Number of ports attached to host controller
4363 *
Edward Falk0baab862005-06-02 18:17:13 -04004364 * This is a helper function which can be called from a driver's
4365 * xxx_init_one() probe function if the hardware uses traditional
4366 * IDE taskfile registers.
4367 *
4368 * This function calls pci_enable_device(), reserves its register
4369 * regions, sets the dma mask, enables bus master mode, and calls
4370 * ata_device_add()
4371 *
Linus Torvalds1da177e2005-04-16 15:20:36 -07004372 * LOCKING:
4373 * Inherited from PCI layer (may sleep).
4374 *
4375 * RETURNS:
Jeff Garzik0cba6322005-05-30 19:49:12 -04004376 * Zero on success, negative on errno-based value on error.
Linus Torvalds1da177e2005-04-16 15:20:36 -07004377 *
4378 */
4379
4380int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
4381 unsigned int n_ports)
4382{
4383 struct ata_probe_ent *probe_ent, *probe_ent2 = NULL;
4384 struct ata_port_info *port[2];
4385 u8 tmp8, mask;
4386 unsigned int legacy_mode = 0;
4387 int disable_dev_on_err = 1;
4388 int rc;
4389
4390 DPRINTK("ENTER\n");
4391
4392 port[0] = port_info[0];
4393 if (n_ports > 1)
4394 port[1] = port_info[1];
4395 else
4396 port[1] = port[0];
4397
4398 if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0
4399 && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
4400 /* TODO: support transitioning to native mode? */
4401 pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8);
4402 mask = (1 << 2) | (1 << 0);
4403 if ((tmp8 & mask) != mask)
4404 legacy_mode = (1 << 3);
4405 }
4406
4407 /* FIXME... */
4408 if ((!legacy_mode) && (n_ports > 1)) {
4409 printk(KERN_ERR "ata: BUG: native mode, n_ports > 1\n");
4410 return -EINVAL;
4411 }
4412
4413 rc = pci_enable_device(pdev);
4414 if (rc)
4415 return rc;
4416
4417 rc = pci_request_regions(pdev, DRV_NAME);
4418 if (rc) {
4419 disable_dev_on_err = 0;
4420 goto err_out;
4421 }
4422
4423 if (legacy_mode) {
4424 if (!request_region(0x1f0, 8, "libata")) {
4425 struct resource *conflict, res;
4426 res.start = 0x1f0;
4427 res.end = 0x1f0 + 8 - 1;
4428 conflict = ____request_resource(&ioport_resource, &res);
4429 if (!strcmp(conflict->name, "libata"))
4430 legacy_mode |= (1 << 0);
4431 else {
4432 disable_dev_on_err = 0;
4433 printk(KERN_WARNING "ata: 0x1f0 IDE port busy\n");
4434 }
4435 } else
4436 legacy_mode |= (1 << 0);
4437
4438 if (!request_region(0x170, 8, "libata")) {
4439 struct resource *conflict, res;
4440 res.start = 0x170;
4441 res.end = 0x170 + 8 - 1;
4442 conflict = ____request_resource(&ioport_resource, &res);
4443 if (!strcmp(conflict->name, "libata"))
4444 legacy_mode |= (1 << 1);
4445 else {
4446 disable_dev_on_err = 0;
4447 printk(KERN_WARNING "ata: 0x170 IDE port busy\n");
4448 }
4449 } else
4450 legacy_mode |= (1 << 1);
4451 }
4452
4453 /* we have legacy mode, but all ports are unavailable */
4454 if (legacy_mode == (1 << 3)) {
4455 rc = -EBUSY;
4456 goto err_out_regions;
4457 }
4458
4459 rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
4460 if (rc)
4461 goto err_out_regions;
4462 rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
4463 if (rc)
4464 goto err_out_regions;
4465
4466 if (legacy_mode) {
4467 probe_ent = ata_pci_init_legacy_mode(pdev, port, &probe_ent2);
4468 } else
4469 probe_ent = ata_pci_init_native_mode(pdev, port);
4470 if (!probe_ent) {
4471 rc = -ENOMEM;
4472 goto err_out_regions;
4473 }
4474
4475 pci_set_master(pdev);
4476
4477 /* FIXME: check ata_device_add return */
4478 if (legacy_mode) {
4479 if (legacy_mode & (1 << 0))
4480 ata_device_add(probe_ent);
4481 if (legacy_mode & (1 << 1))
4482 ata_device_add(probe_ent2);
4483 } else
4484 ata_device_add(probe_ent);
4485
4486 kfree(probe_ent);
4487 kfree(probe_ent2);
4488
4489 return 0;
4490
4491err_out_regions:
4492 if (legacy_mode & (1 << 0))
4493 release_region(0x1f0, 8);
4494 if (legacy_mode & (1 << 1))
4495 release_region(0x170, 8);
4496 pci_release_regions(pdev);
4497err_out:
4498 if (disable_dev_on_err)
4499 pci_disable_device(pdev);
4500 return rc;
4501}
4502
4503/**
4504 * ata_pci_remove_one - PCI layer callback for device removal
4505 * @pdev: PCI device that was removed
4506 *
4507 * PCI layer indicates to libata via this hook that
4508 * hot-unplug or module unload event has occured.
4509 * Handle this by unregistering all objects associated
4510 * with this PCI device. Free those objects. Then finally
4511 * release PCI resources and disable device.
4512 *
4513 * LOCKING:
4514 * Inherited from PCI layer (may sleep).
4515 */
4516
4517void ata_pci_remove_one (struct pci_dev *pdev)
4518{
4519 struct device *dev = pci_dev_to_dev(pdev);
4520 struct ata_host_set *host_set = dev_get_drvdata(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004521
Alan Cox17b14452005-09-15 15:44:00 +01004522 ata_host_set_remove(host_set);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004523 pci_release_regions(pdev);
4524 pci_disable_device(pdev);
4525 dev_set_drvdata(dev, NULL);
4526}
4527
4528/* move to PCI subsystem */
4529int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits)
4530{
4531 unsigned long tmp = 0;
4532
4533 switch (bits->width) {
4534 case 1: {
4535 u8 tmp8 = 0;
4536 pci_read_config_byte(pdev, bits->reg, &tmp8);
4537 tmp = tmp8;
4538 break;
4539 }
4540 case 2: {
4541 u16 tmp16 = 0;
4542 pci_read_config_word(pdev, bits->reg, &tmp16);
4543 tmp = tmp16;
4544 break;
4545 }
4546 case 4: {
4547 u32 tmp32 = 0;
4548 pci_read_config_dword(pdev, bits->reg, &tmp32);
4549 tmp = tmp32;
4550 break;
4551 }
4552
4553 default:
4554 return -EINVAL;
4555 }
4556
4557 tmp &= bits->mask;
4558
4559 return (tmp == bits->val) ? 1 : 0;
4560}
4561#endif /* CONFIG_PCI */
4562
4563
Linus Torvalds1da177e2005-04-16 15:20:36 -07004564static int __init ata_init(void)
4565{
4566 ata_wq = create_workqueue("ata");
4567 if (!ata_wq)
4568 return -ENOMEM;
4569
4570 printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n");
4571 return 0;
4572}
4573
4574static void __exit ata_exit(void)
4575{
4576 destroy_workqueue(ata_wq);
4577}
4578
4579module_init(ata_init);
4580module_exit(ata_exit);
4581
4582/*
4583 * libata is essentially a library of internal helper functions for
4584 * low-level ATA host controller drivers. As such, the API/ABI is
4585 * likely to change as new drivers are added and updated.
4586 * Do not depend on ABI/API stability.
4587 */
4588
4589EXPORT_SYMBOL_GPL(ata_std_bios_param);
4590EXPORT_SYMBOL_GPL(ata_std_ports);
4591EXPORT_SYMBOL_GPL(ata_device_add);
Alan Cox17b14452005-09-15 15:44:00 +01004592EXPORT_SYMBOL_GPL(ata_host_set_remove);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004593EXPORT_SYMBOL_GPL(ata_sg_init);
4594EXPORT_SYMBOL_GPL(ata_sg_init_one);
4595EXPORT_SYMBOL_GPL(ata_qc_complete);
4596EXPORT_SYMBOL_GPL(ata_qc_issue_prot);
4597EXPORT_SYMBOL_GPL(ata_eng_timeout);
4598EXPORT_SYMBOL_GPL(ata_tf_load);
4599EXPORT_SYMBOL_GPL(ata_tf_read);
4600EXPORT_SYMBOL_GPL(ata_noop_dev_select);
4601EXPORT_SYMBOL_GPL(ata_std_dev_select);
4602EXPORT_SYMBOL_GPL(ata_tf_to_fis);
4603EXPORT_SYMBOL_GPL(ata_tf_from_fis);
4604EXPORT_SYMBOL_GPL(ata_check_status);
4605EXPORT_SYMBOL_GPL(ata_altstatus);
4606EXPORT_SYMBOL_GPL(ata_chk_err);
4607EXPORT_SYMBOL_GPL(ata_exec_command);
4608EXPORT_SYMBOL_GPL(ata_port_start);
4609EXPORT_SYMBOL_GPL(ata_port_stop);
Jeff Garzikaa8f0dc2005-05-26 21:54:27 -04004610EXPORT_SYMBOL_GPL(ata_host_stop);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004611EXPORT_SYMBOL_GPL(ata_interrupt);
4612EXPORT_SYMBOL_GPL(ata_qc_prep);
4613EXPORT_SYMBOL_GPL(ata_bmdma_setup);
4614EXPORT_SYMBOL_GPL(ata_bmdma_start);
4615EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
4616EXPORT_SYMBOL_GPL(ata_bmdma_status);
4617EXPORT_SYMBOL_GPL(ata_bmdma_stop);
4618EXPORT_SYMBOL_GPL(ata_port_probe);
4619EXPORT_SYMBOL_GPL(sata_phy_reset);
4620EXPORT_SYMBOL_GPL(__sata_phy_reset);
4621EXPORT_SYMBOL_GPL(ata_bus_reset);
4622EXPORT_SYMBOL_GPL(ata_port_disable);
4623EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
4624EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
4625EXPORT_SYMBOL_GPL(ata_scsi_error);
4626EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
4627EXPORT_SYMBOL_GPL(ata_scsi_release);
4628EXPORT_SYMBOL_GPL(ata_host_intr);
4629EXPORT_SYMBOL_GPL(ata_dev_classify);
4630EXPORT_SYMBOL_GPL(ata_dev_id_string);
Brad Campbell6f2f3812005-05-12 15:07:47 -04004631EXPORT_SYMBOL_GPL(ata_dev_config);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004632EXPORT_SYMBOL_GPL(ata_scsi_simulate);
4633
4634#ifdef CONFIG_PCI
4635EXPORT_SYMBOL_GPL(pci_test_config_bits);
Jeff Garzik374b1872005-08-30 05:42:52 -04004636EXPORT_SYMBOL_GPL(ata_pci_host_stop);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004637EXPORT_SYMBOL_GPL(ata_pci_init_native_mode);
4638EXPORT_SYMBOL_GPL(ata_pci_init_one);
4639EXPORT_SYMBOL_GPL(ata_pci_remove_one);
4640#endif /* CONFIG_PCI */