Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | # |
| 2 | # USB Serial device configuration |
| 3 | # |
| 4 | |
| 5 | menu "USB Serial Converter support" |
| 6 | depends on USB!=n |
| 7 | |
| 8 | config USB_SERIAL |
| 9 | tristate "USB Serial Converter support" |
| 10 | depends on USB |
| 11 | ---help--- |
| 12 | Say Y here if you have a USB device that provides normal serial |
| 13 | ports, or acts like a serial device, and you want to connect it to |
| 14 | your USB bus. |
| 15 | |
| 16 | Please read <file:Documentation/usb/usb-serial.txt> for more |
| 17 | information on the specifics of the different devices that are |
| 18 | supported, and on how to use them. |
| 19 | |
| 20 | To compile this driver as a module, choose M here: the |
| 21 | module will be called usbserial. |
| 22 | |
| 23 | config USB_SERIAL_CONSOLE |
| 24 | bool "USB Serial Console device support (EXPERIMENTAL)" |
| 25 | depends on USB_SERIAL=y && EXPERIMENTAL |
| 26 | ---help--- |
| 27 | If you say Y here, it will be possible to use a USB to serial |
| 28 | converter port as the system console (the system console is the |
| 29 | device which receives all kernel messages and warnings and which |
| 30 | allows logins in single user mode). This could be useful if some |
| 31 | terminal or printer is connected to that serial port. |
| 32 | |
| 33 | Even if you say Y here, the currently visible virtual console |
| 34 | (/dev/tty0) will still be used as the system console by default, but |
| 35 | you can alter that using a kernel command line option such as |
| 36 | "console=ttyUSB0". (Try "man bootparam" or see the documentation of |
| 37 | your boot loader (lilo or loadlin) about how to pass options to the |
| 38 | kernel at boot time.) |
| 39 | |
| 40 | If you don't have a VGA card installed and you say Y here, the |
| 41 | kernel will automatically use the first USB to serial converter |
| 42 | port, /dev/ttyUSB0, as system console. |
| 43 | |
| 44 | If unsure, say N. |
| 45 | |
| 46 | config USB_SERIAL_GENERIC |
| 47 | bool "USB Generic Serial Driver" |
| 48 | depends on USB_SERIAL |
| 49 | help |
| 50 | Say Y here if you want to use the generic USB serial driver. Please |
| 51 | read <file:Documentation/usb/usb-serial.txt> for more information on |
| 52 | using this driver. It is recommended that the "USB Serial converter |
| 53 | support" be compiled as a module for this driver to be used |
| 54 | properly. |
| 55 | |
Greg KH | 3b86b20 | 2005-04-25 21:46:29 -0700 | [diff] [blame] | 56 | config USB_SERIAL_AIRPRIME |
| 57 | tristate "USB AirPrime CDMA Wireless Driver" |
| 58 | depends on USB_SERIAL |
| 59 | help |
| 60 | Say Y here if you want to use a AirPrime CDMA Wireless PC card. |
| 61 | |
| 62 | To compile this driver as a module, choose M here: the |
| 63 | module will be called airprime. |
| 64 | |
Greg Kroah-Hartman | bb83398 | 2005-11-17 09:48:18 -0800 | [diff] [blame] | 65 | config USB_SERIAL_ANYDATA |
| 66 | tristate "USB AnyData CDMA Wireless Driver" |
| 67 | depends on USB_SERIAL |
| 68 | help |
| 69 | Say Y here if you want to use a AnyData CDMA device. |
| 70 | |
| 71 | To compile this driver as a module, choose M here: the |
| 72 | module will be called anydata. |
| 73 | |
Greg Kroah-Hartman | 815ddc9 | 2006-05-12 11:05:29 -0700 | [diff] [blame] | 74 | config USB_SERIAL_ARK3116 |
| 75 | tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)" |
| 76 | depends on USB_SERIAL && EXPERIMENTAL |
| 77 | help |
| 78 | Say Y here if you want to use a ARK Micro 3116 USB to Serial |
| 79 | device. |
| 80 | |
| 81 | To compile this driver as a module, choose M here: the |
| 82 | module will be called ark3116 |
| 83 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 84 | config USB_SERIAL_BELKIN |
| 85 | tristate "USB Belkin and Peracom Single Port Serial Driver" |
| 86 | depends on USB_SERIAL |
| 87 | help |
| 88 | Say Y here if you want to use a Belkin USB Serial single port |
| 89 | adaptor (F5U103 is one of the model numbers) or the Peracom single |
| 90 | port USB to serial adapter. |
| 91 | |
| 92 | To compile this driver as a module, choose M here: the |
| 93 | module will be called belkin_sa. |
| 94 | |
| 95 | config USB_SERIAL_WHITEHEAT |
| 96 | tristate "USB ConnectTech WhiteHEAT Serial Driver" |
Alan Cox | 33f0f88 | 2006-01-09 20:54:13 -0800 | [diff] [blame] | 97 | depends on USB_SERIAL |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 98 | help |
| 99 | Say Y here if you want to use a ConnectTech WhiteHEAT 4 port |
| 100 | USB to serial converter device. |
| 101 | |
| 102 | To compile this driver as a module, choose M here: the |
| 103 | module will be called whiteheat. |
| 104 | |
| 105 | config USB_SERIAL_DIGI_ACCELEPORT |
| 106 | tristate "USB Digi International AccelePort USB Serial Driver" |
| 107 | depends on USB_SERIAL |
| 108 | ---help--- |
| 109 | Say Y here if you want to use Digi AccelePort USB 2 or 4 devices, |
| 110 | 2 port (plus parallel port) and 4 port USB serial converters. The |
| 111 | parallel port on the USB 2 appears as a third serial port on Linux. |
| 112 | The Digi Acceleport USB 8 is not yet supported by this driver. |
| 113 | |
| 114 | This driver works under SMP with the usb-uhci driver. It does not |
| 115 | work under SMP with the uhci driver. |
| 116 | |
| 117 | To compile this driver as a module, choose M here: the |
| 118 | module will be called digi_acceleport. |
| 119 | |
| 120 | config USB_SERIAL_CP2101 |
| 121 | tristate "USB CP2101 UART Bridge Controller" |
| 122 | depends on USB_SERIAL && EXPERIMENTAL |
| 123 | help |
| 124 | Say Y here if you want to use a CP2101/CP2102 based USB to RS232 |
| 125 | converter. |
| 126 | |
| 127 | To compile this driver as a module, choose M here: the |
| 128 | module will be called cp2101. |
| 129 | |
| 130 | config USB_SERIAL_CYPRESS_M8 |
| 131 | tristate "USB Cypress M8 USB Serial Driver" |
| 132 | depends on USB_SERIAL && EXPERIMENTAL |
| 133 | help |
| 134 | Say Y here if you want to use a device that contains the Cypress |
| 135 | USB to Serial microcontroller, such as the DeLorme Earthmate GPS. |
| 136 | |
| 137 | Attempted SMP support... send bug reports! |
| 138 | |
| 139 | Supported microcontrollers in the CY4601 family are: |
| 140 | CY7C63741 CY7C63742 CY7C63743 CY7C64013 |
| 141 | |
| 142 | To compile this driver as a module, choose M here: the |
| 143 | module will be called cypress_m8. |
| 144 | |
| 145 | config USB_SERIAL_EMPEG |
| 146 | tristate "USB Empeg empeg-car Mark I/II Driver" |
| 147 | depends on USB_SERIAL |
| 148 | help |
| 149 | Say Y here if you want to connect to your Empeg empeg-car Mark I/II |
| 150 | mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...} |
| 151 | device node. See <file:Documentation/usb/usb-serial.txt> for more |
| 152 | tidbits of information. |
| 153 | |
| 154 | To compile this driver as a module, choose M here: the |
| 155 | module will be called empeg. |
| 156 | |
| 157 | config USB_SERIAL_FTDI_SIO |
| 158 | tristate "USB FTDI Single Port Serial Driver (EXPERIMENTAL)" |
| 159 | depends on USB_SERIAL && EXPERIMENTAL |
| 160 | ---help--- |
| 161 | Say Y here if you want to use a FTDI SIO single port USB to serial |
| 162 | converter device. The implementation I have is called the USC-1000. |
| 163 | This driver has also be tested with the 245 and 232 devices. |
| 164 | |
| 165 | See <http://ftdi-usb-sio.sourceforge.net/> for more |
| 166 | information on this driver and the device. |
| 167 | |
| 168 | To compile this driver as a module, choose M here: the |
| 169 | module will be called ftdi_sio. |
| 170 | |
Greg Kroah-Hartman | f981480 | 2006-04-13 08:09:52 -0700 | [diff] [blame] | 171 | config USB_SERIAL_FUNSOFT |
| 172 | tristate "USB Fundamental Software Dongle Driver" |
| 173 | depends on USB_SERIAL |
| 174 | ---help--- |
| 175 | Say Y here if you want to use the Fundamental Software dongle. |
| 176 | |
| 177 | To compile this driver as a module, choose M here: the |
| 178 | module will be called funsoft. |
| 179 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 180 | config USB_SERIAL_VISOR |
| 181 | tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver" |
| 182 | depends on USB_SERIAL |
| 183 | help |
| 184 | Say Y here if you want to connect to your HandSpring Visor, Palm |
| 185 | m500 or m505 through its USB docking station. See |
| 186 | <http://usbvisor.sourceforge.net/> for more information on using this |
| 187 | driver. |
| 188 | |
| 189 | To compile this driver as a module, choose M here: the |
| 190 | module will be called visor. |
| 191 | |
| 192 | config USB_SERIAL_IPAQ |
| 193 | tristate "USB PocketPC PDA Driver" |
| 194 | depends on USB_SERIAL |
| 195 | help |
| 196 | Say Y here if you want to connect to your Compaq iPAQ, HP Jornada |
| 197 | or any other PDA running Windows CE 3.0 or PocketPC 2002 |
| 198 | using a USB cradle/cable. For information on using the driver, |
| 199 | read <file:Documentation/usb/usb-serial.txt>. |
| 200 | |
| 201 | To compile this driver as a module, choose M here: the |
| 202 | module will be called ipaq. |
| 203 | |
| 204 | config USB_SERIAL_IR |
| 205 | tristate "USB IR Dongle Serial Driver (EXPERIMENTAL)" |
| 206 | depends on USB_SERIAL && EXPERIMENTAL |
| 207 | help |
| 208 | Say Y here if you want to enable simple serial support for USB IrDA |
| 209 | devices. This is useful if you do not want to use the full IrDA |
| 210 | stack. |
| 211 | |
| 212 | To compile this driver as a module, choose M here: the |
| 213 | module will be called ir-usb. |
| 214 | |
| 215 | config USB_SERIAL_EDGEPORT |
| 216 | tristate "USB Inside Out Edgeport Serial Driver" |
| 217 | depends on USB_SERIAL |
| 218 | ---help--- |
| 219 | Say Y here if you want to use any of the following devices from |
| 220 | Inside Out Networks (Digi): |
| 221 | Edgeport/4 |
| 222 | Rapidport/4 |
| 223 | Edgeport/4t |
| 224 | Edgeport/2 |
| 225 | Edgeport/4i |
| 226 | Edgeport/2i |
| 227 | Edgeport/421 |
| 228 | Edgeport/21 |
| 229 | Edgeport/8 |
| 230 | Edgeport/8 Dual |
| 231 | Edgeport/2D8 |
| 232 | Edgeport/4D8 |
| 233 | Edgeport/8i |
| 234 | Edgeport/2 DIN |
| 235 | Edgeport/4 DIN |
| 236 | Edgeport/16 Dual |
| 237 | |
| 238 | To compile this driver as a module, choose M here: the |
| 239 | module will be called io_edgeport. |
| 240 | |
| 241 | config USB_SERIAL_EDGEPORT_TI |
| 242 | tristate "USB Inside Out Edgeport Serial Driver (TI devices)" |
| 243 | depends on USB_SERIAL |
| 244 | help |
| 245 | Say Y here if you want to use any of the devices from Inside Out |
| 246 | Networks (Digi) that are not supported by the io_edgeport driver. |
| 247 | This includes the Edgeport/1 device. |
| 248 | |
| 249 | To compile this driver as a module, choose M here: the |
| 250 | module will be called io_ti. |
| 251 | |
| 252 | config USB_SERIAL_GARMIN |
| 253 | tristate "USB Garmin GPS driver" |
| 254 | depends on USB_SERIAL |
| 255 | help |
| 256 | Say Y here if you want to connect to your Garmin GPS. |
| 257 | Should work with most Garmin GPS devices which have a native USB port. |
| 258 | |
| 259 | See <http://sourceforge.net/projects/garmin-gps> for the latest |
| 260 | version of the driver. |
| 261 | |
| 262 | To compile this driver as a module, choose M here: the |
| 263 | module will be called garmin_gps. |
| 264 | |
| 265 | config USB_SERIAL_IPW |
| 266 | tristate "USB IPWireless (3G UMTS TDD) Driver (EXPERIMENTAL)" |
| 267 | depends on USB_SERIAL && EXPERIMENTAL |
| 268 | help |
| 269 | Say Y here if you want to use a IPWireless USB modem such as |
| 270 | the ones supplied by Axity3G/Sentech South Africa. |
| 271 | |
| 272 | To compile this driver as a module, choose M here: the |
| 273 | module will be called ipw. |
| 274 | |
| 275 | config USB_SERIAL_KEYSPAN_PDA |
| 276 | tristate "USB Keyspan PDA Single Port Serial Driver" |
| 277 | depends on USB_SERIAL |
| 278 | help |
| 279 | Say Y here if you want to use a Keyspan PDA single port USB to |
| 280 | serial converter device. This driver makes use of firmware |
| 281 | developed from scratch by Brian Warner. |
| 282 | |
| 283 | To compile this driver as a module, choose M here: the |
| 284 | module will be called keyspan_pda. |
| 285 | |
| 286 | config USB_SERIAL_KEYSPAN |
| 287 | tristate "USB Keyspan USA-xxx Serial Driver" |
| 288 | depends on USB_SERIAL |
| 289 | ---help--- |
| 290 | Say Y here if you want to use Keyspan USB to serial converter |
| 291 | devices. This driver makes use of Keyspan's official firmware |
| 292 | and was developed with their support. You must also include |
| 293 | firmware to support your particular device(s). |
| 294 | |
| 295 | See <http://misc.nu/hugh/keyspan.html> for more information. |
| 296 | |
| 297 | To compile this driver as a module, choose M here: the |
| 298 | module will be called keyspan. |
| 299 | |
| 300 | config USB_SERIAL_KEYSPAN_MPR |
| 301 | bool "USB Keyspan MPR Firmware" |
| 302 | depends on USB_SERIAL_KEYSPAN |
| 303 | help |
| 304 | Say Y here to include firmware for the Keyspan MPR converter. |
| 305 | |
| 306 | config USB_SERIAL_KEYSPAN_USA28 |
| 307 | bool "USB Keyspan USA-28 Firmware" |
| 308 | depends on USB_SERIAL_KEYSPAN |
| 309 | help |
| 310 | Say Y here to include firmware for the USA-28 converter. |
| 311 | |
| 312 | config USB_SERIAL_KEYSPAN_USA28X |
| 313 | bool "USB Keyspan USA-28X Firmware" |
| 314 | depends on USB_SERIAL_KEYSPAN |
| 315 | help |
| 316 | Say Y here to include firmware for the USA-28X converter. |
| 317 | Be sure you have a USA-28X, there are also 28XA and 28XB |
| 318 | models, the label underneath has the actual part number. |
| 319 | |
| 320 | config USB_SERIAL_KEYSPAN_USA28XA |
| 321 | bool "USB Keyspan USA-28XA Firmware" |
| 322 | depends on USB_SERIAL_KEYSPAN |
| 323 | help |
| 324 | Say Y here to include firmware for the USA-28XA converter. |
| 325 | Be sure you have a USA-28XA, there are also 28X and 28XB |
| 326 | models, the label underneath has the actual part number. |
| 327 | |
| 328 | config USB_SERIAL_KEYSPAN_USA28XB |
| 329 | bool "USB Keyspan USA-28XB Firmware" |
| 330 | depends on USB_SERIAL_KEYSPAN |
| 331 | help |
| 332 | Say Y here to include firmware for the USA-28XB converter. |
| 333 | Be sure you have a USA-28XB, there are also 28X and 28XA |
| 334 | models, the label underneath has the actual part number. |
| 335 | |
| 336 | config USB_SERIAL_KEYSPAN_USA19 |
| 337 | bool "USB Keyspan USA-19 Firmware" |
| 338 | depends on USB_SERIAL_KEYSPAN |
| 339 | help |
| 340 | Say Y here to include firmware for the USA-19 converter. |
| 341 | |
| 342 | config USB_SERIAL_KEYSPAN_USA18X |
| 343 | bool "USB Keyspan USA-18X Firmware" |
| 344 | depends on USB_SERIAL_KEYSPAN |
| 345 | help |
| 346 | Say Y here to include firmware for the USA-18X converter. |
| 347 | |
| 348 | config USB_SERIAL_KEYSPAN_USA19W |
| 349 | bool "USB Keyspan USA-19W Firmware" |
| 350 | depends on USB_SERIAL_KEYSPAN |
| 351 | help |
| 352 | Say Y here to include firmware for the USA-19W converter. |
| 353 | |
| 354 | config USB_SERIAL_KEYSPAN_USA19QW |
| 355 | bool "USB Keyspan USA-19QW Firmware" |
| 356 | depends on USB_SERIAL_KEYSPAN |
| 357 | help |
| 358 | Say Y here to include firmware for the USA-19QW converter. |
| 359 | |
| 360 | config USB_SERIAL_KEYSPAN_USA19QI |
| 361 | bool "USB Keyspan USA-19QI Firmware" |
| 362 | depends on USB_SERIAL_KEYSPAN |
| 363 | help |
| 364 | Say Y here to include firmware for the USA-19QI converter. |
| 365 | |
| 366 | config USB_SERIAL_KEYSPAN_USA49W |
| 367 | bool "USB Keyspan USA-49W Firmware" |
| 368 | depends on USB_SERIAL_KEYSPAN |
| 369 | help |
| 370 | Say Y here to include firmware for the USA-49W converter. |
| 371 | |
| 372 | config USB_SERIAL_KEYSPAN_USA49WLC |
| 373 | bool "USB Keyspan USA-49WLC Firmware" |
| 374 | depends on USB_SERIAL_KEYSPAN |
| 375 | help |
| 376 | Say Y here to include firmware for the USA-49WLC converter. |
| 377 | |
| 378 | config USB_SERIAL_KLSI |
| 379 | tristate "USB KL5KUSB105 (Palmconnect) Driver (EXPERIMENTAL)" |
| 380 | depends on USB_SERIAL && EXPERIMENTAL |
| 381 | ---help--- |
| 382 | Say Y here if you want to use a KL5KUSB105 - based single port |
| 383 | serial adapter. The most widely known -- and currently the only |
| 384 | tested -- device in this category is the PalmConnect USB Serial |
| 385 | adapter sold by Palm Inc. for use with their Palm III and Palm V |
| 386 | series PDAs. |
| 387 | |
| 388 | Please read <file:Documentation/usb/usb-serial.txt> for more |
| 389 | information. |
| 390 | |
| 391 | To compile this driver as a module, choose M here: the |
| 392 | module will be called kl5kusb105. |
| 393 | |
| 394 | config USB_SERIAL_KOBIL_SCT |
| 395 | tristate "USB KOBIL chipcard reader" |
| 396 | depends on USB_SERIAL |
| 397 | ---help--- |
| 398 | Say Y here if you want to use one of the following KOBIL USB chipcard |
| 399 | readers: |
| 400 | |
| 401 | - USB TWIN |
| 402 | - KAAN Standard Plus |
| 403 | - KAAN SIM |
| 404 | - SecOVID Reader Plus |
| 405 | - B1 Professional |
| 406 | - KAAN Professional |
| 407 | |
| 408 | Note that you need a current CT-API. |
| 409 | To compile this driver as a module, choose M here: the |
| 410 | module will be called kobil_sct. |
| 411 | |
| 412 | config USB_SERIAL_MCT_U232 |
| 413 | tristate "USB MCT Single Port Serial Driver" |
| 414 | depends on USB_SERIAL |
| 415 | ---help--- |
| 416 | Say Y here if you want to use a USB Serial single port adapter from |
| 417 | Magic Control Technology Corp. (U232 is one of the model numbers). |
| 418 | |
| 419 | This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB |
Pete Zaitcev | 6f065f7 | 2006-05-22 22:02:32 -0700 | [diff] [blame] | 420 | BAY, Belkin F5U109, and Belkin F5U409 devices. |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 421 | |
| 422 | To compile this driver as a module, choose M here: the |
| 423 | module will be called mct_u232. |
| 424 | |
Greg Kroah-Hartman | e9a66c6 | 2006-03-17 17:40:08 -0800 | [diff] [blame] | 425 | config USB_SERIAL_NAVMAN |
| 426 | tristate "USB Navman GPS device" |
| 427 | depends on USB_SERIAL |
| 428 | help |
| 429 | To compile this driver as a module, choose M here: the |
| 430 | module will be called navman. |
| 431 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 432 | config USB_SERIAL_PL2303 |
| 433 | tristate "USB Prolific 2303 Single Port Serial Driver" |
| 434 | depends on USB_SERIAL |
| 435 | help |
| 436 | Say Y here if you want to use the PL2303 USB Serial single port |
| 437 | adapter from Prolific. |
| 438 | |
| 439 | To compile this driver as a module, choose M here: the |
| 440 | module will be called pl2303. |
| 441 | |
Arthur Huillet | 36045fb | 2005-04-22 15:06:59 -0700 | [diff] [blame] | 442 | config USB_SERIAL_HP4X |
| 443 | tristate "USB HP4x Calculators support" |
| 444 | depends on USB_SERIAL |
| 445 | help |
| 446 | Say Y here if you want to use an Hewlett-Packard 4x Calculator. |
| 447 | |
| 448 | To compile this driver as a module, choose M here: the |
| 449 | module will be called hp4x. |
| 450 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 451 | config USB_SERIAL_SAFE |
| 452 | tristate "USB Safe Serial (Encapsulated) Driver (EXPERIMENTAL)" |
| 453 | depends on USB_SERIAL && EXPERIMENTAL |
| 454 | |
| 455 | config USB_SERIAL_SAFE_PADDED |
| 456 | bool "USB Secure Encapsulated Driver - Padded" |
| 457 | depends on USB_SERIAL_SAFE |
| 458 | |
| 459 | config USB_SERIAL_TI |
| 460 | tristate "USB TI 3410/5052 Serial Driver" |
| 461 | depends on USB_SERIAL |
| 462 | help |
| 463 | Say Y here if you want to use the TI USB 3410 or 5052 |
| 464 | serial devices. |
| 465 | |
| 466 | To compile this driver as a module, choose M here: the |
| 467 | module will be called ti_usb_3410_5052. |
| 468 | |
| 469 | config USB_SERIAL_CYBERJACK |
| 470 | tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader (EXPERIMENTAL)" |
| 471 | depends on USB_SERIAL && EXPERIMENTAL |
| 472 | ---help--- |
| 473 | Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard |
| 474 | reader. This is an interface to ISO 7816 compatible contactbased |
| 475 | chipcards, e.g. GSM SIMs. |
| 476 | |
| 477 | To compile this driver as a module, choose M here: the |
| 478 | module will be called cyberjack. |
| 479 | |
| 480 | If unsure, say N. |
| 481 | |
| 482 | config USB_SERIAL_XIRCOM |
| 483 | tristate "USB Xircom / Entregra Single Port Serial Driver" |
| 484 | depends on USB_SERIAL |
| 485 | help |
| 486 | Say Y here if you want to use a Xircom or Entregra single port USB to |
| 487 | serial converter device. This driver makes use of firmware |
| 488 | developed from scratch by Brian Warner. |
| 489 | |
| 490 | To compile this driver as a module, choose M here: the |
| 491 | module will be called keyspan_pda. |
| 492 | |
Matthias Urlichs | 58cfe91 | 2005-05-23 17:00:48 -0700 | [diff] [blame] | 493 | config USB_SERIAL_OPTION |
| 494 | tristate "USB Option PCMCIA serial driver" |
| 495 | depends on USB_SERIAL && USB_OHCI_HCD && PCCARD |
| 496 | help |
| 497 | Say Y here if you want to use an Option card. This is a |
| 498 | GSM card, controlled by three serial ports which are connected |
| 499 | via an OHCI adapter located on a PC card. |
| 500 | |
| 501 | To compile this driver as a module, choose M here: the |
| 502 | module will be called option. |
| 503 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 504 | config USB_SERIAL_OMNINET |
| 505 | tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)" |
| 506 | depends on USB_SERIAL && EXPERIMENTAL |
| 507 | help |
| 508 | Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA. |
| 509 | |
| 510 | To compile this driver as a module, choose M here: the |
| 511 | module will be called omninet. |
| 512 | |
| 513 | config USB_EZUSB |
| 514 | bool |
| 515 | depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT |
| 516 | default y |
| 517 | |
| 518 | endmenu |
| 519 | |