blob: b9d11a899b8861576be26f883882c969d170701f [file] [log] [blame]
Roman Zippelface4372006-06-08 22:12:45 -07001config DEFCONFIG_LIST
2 string
Paolo 'Blaisorblade' Giarrussob2670ea2006-10-19 23:28:23 -07003 depends on !UML
Roman Zippelface4372006-06-08 22:12:45 -07004 option defconfig_list
5 default "/lib/modules/$UNAME_RELEASE/.config"
6 default "/etc/kernel-config"
7 default "/boot/config-$UNAME_RELEASE"
8 default "arch/$ARCH/defconfig"
9
Al Boldiff0cfc62007-07-31 00:39:23 -070010menu "General setup"
Linus Torvalds1da177e2005-04-16 15:20:36 -070011
12config EXPERIMENTAL
13 bool "Prompt for development and/or incomplete code/drivers"
14 ---help---
15 Some of the various things that Linux supports (such as network
16 drivers, file systems, network protocols, etc.) can be in a state
17 of development where the functionality, stability, or the level of
18 testing is not yet high enough for general use. This is usually
19 known as the "alpha-test" phase among developers. If a feature is
20 currently in alpha-test, then the developers usually discourage
21 uninformed widespread use of this feature by the general public to
22 avoid "Why doesn't this work?" type mail messages. However, active
23 testing and use of these systems is welcomed. Just be aware that it
24 may not meet the normal level of reliability or it may fail to work
25 in some special cases. Detailed bug reports from people familiar
26 with the kernel internals are usually welcomed by the developers
27 (before submitting bug reports, please read the documents
28 <file:README>, <file:MAINTAINERS>, <file:REPORTING-BUGS>,
29 <file:Documentation/BUG-HUNTING>, and
30 <file:Documentation/oops-tracing.txt> in the kernel source).
31
32 This option will also make obsoleted drivers available. These are
33 drivers that have been replaced by something else, and/or are
34 scheduled to be removed in a future kernel release.
35
36 Unless you intend to help test and develop a feature or driver that
37 falls into this category, or you have a situation that requires
38 using these features, you should probably say N here, which will
39 cause the configurator to present you with fewer choices. If
40 you say Y here, you will be offered the choice of using features or
41 drivers that are currently considered to be in the alpha-test phase.
42
Linus Torvalds1da177e2005-04-16 15:20:36 -070043config BROKEN
44 bool
Linus Torvalds1da177e2005-04-16 15:20:36 -070045
46config BROKEN_ON_SMP
47 bool
48 depends on BROKEN || !SMP
49 default y
50
51config LOCK_KERNEL
52 bool
53 depends on SMP || PREEMPT
54 default y
55
56config INIT_ENV_ARG_LIMIT
57 int
Adrian Bunkdd673bc2006-06-30 01:55:51 -070058 default 32 if !UML
59 default 128 if UML
Linus Torvalds1da177e2005-04-16 15:20:36 -070060 help
Randy Dunlap34ad92c2005-10-30 15:01:46 -080061 Maximum of each of the number of arguments and environment
62 variables passed to init from the kernel command line.
Linus Torvalds1da177e2005-04-16 15:20:36 -070063
Linus Torvalds1da177e2005-04-16 15:20:36 -070064
65config LOCALVERSION
66 string "Local version - append to kernel release"
67 help
68 Append an extra string to the end of your kernel version.
69 This will show up when you type uname, for example.
70 The string you set here will be appended after the contents of
71 any files with a filename matching localversion* in your
72 object and source tree, in that order. Your total string can
73 be a maximum of 64 characters.
74
Ryan Andersonaaebf432005-07-31 04:57:49 -040075config LOCALVERSION_AUTO
76 bool "Automatically append version information to the version string"
77 default y
78 help
79 This will try to automatically determine if the current tree is a
Robert P. J. Day6e5a5422007-05-01 23:08:11 +020080 release tree by looking for git tags that belong to the current
81 top of tree revision.
Ryan Andersonaaebf432005-07-31 04:57:49 -040082
83 A string of the format -gxxxxxxxx will be added to the localversion
Robert P. J. Day6e5a5422007-05-01 23:08:11 +020084 if a git-based tree is found. The string generated by this will be
Ryan Andersonaaebf432005-07-31 04:57:49 -040085 appended after any matching localversion* files, and after the value
Robert P. J. Day6e5a5422007-05-01 23:08:11 +020086 set in CONFIG_LOCALVERSION.
Ryan Andersonaaebf432005-07-31 04:57:49 -040087
Robert P. J. Day6e5a5422007-05-01 23:08:11 +020088 (The actual string used here is the first eight characters produced
89 by running the command:
90
91 $ git rev-parse --verify HEAD
92
93 which is done within the script "scripts/setlocalversion".)
Ryan Andersonaaebf432005-07-31 04:57:49 -040094
Linus Torvalds1da177e2005-04-16 15:20:36 -070095config SWAP
96 bool "Support for paging of anonymous memory (swap)"
David Howells93614012006-09-30 20:45:40 +020097 depends on MMU && BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -070098 default y
99 help
100 This option allows you to choose whether you want to have support
Jesper Juhl92c35042006-01-15 02:40:08 +0100101 for so called swap devices or swap files in your kernel that are
Linus Torvalds1da177e2005-04-16 15:20:36 -0700102 used to provide more virtual memory than the actual RAM present
103 in your computer. If unsure say Y.
104
105config SYSVIPC
106 bool "System V IPC"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700107 ---help---
108 Inter Process Communication is a suite of library functions and
109 system calls which let processes (running programs) synchronize and
110 exchange information. It is generally considered to be a good thing,
111 and some programs won't run unless you say Y here. In particular, if
112 you want to run the DOS emulator dosemu under Linux (read the
113 DOSEMU-HOWTO, available from <http://www.tldp.org/docs.html#howto>),
114 you'll need to say Y here.
115
116 You can find documentation about IPC with "info ipc" and also in
117 section 6.4 of the Linux Programmer's Guide, available from
118 <http://www.tldp.org/guides.html>.
119
Eric W. Biedermana5494dc2007-02-14 00:34:06 -0800120config SYSVIPC_SYSCTL
121 bool
122 depends on SYSVIPC
123 depends on SYSCTL
124 default y
125
Linus Torvalds1da177e2005-04-16 15:20:36 -0700126config POSIX_MQUEUE
127 bool "POSIX Message Queues"
128 depends on NET && EXPERIMENTAL
129 ---help---
130 POSIX variant of message queues is a part of IPC. In POSIX message
131 queues every message has a priority which decides about succession
132 of receiving it by a process. If you want to compile and run
133 programs written e.g. for Solaris with use of its POSIX message
Robert P. J. Dayb0e37652007-05-09 07:25:13 +0200134 queues (functions mq_*) say Y here.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700135
136 POSIX message queues are visible as a filesystem called 'mqueue'
137 and can be mounted somewhere if you want to do filesystem
138 operations on message queues.
139
140 If unsure, say Y.
141
142config BSD_PROCESS_ACCT
143 bool "BSD Process Accounting"
144 help
145 If you say Y here, a user level program will be able to instruct the
146 kernel (via a special system call) to write process accounting
147 information to a file: whenever a process exits, information about
148 that process will be appended to the file by the kernel. The
149 information includes things such as creation time, owning user,
150 command name, memory usage, controlling terminal etc. (the complete
151 list is in the struct acct in <file:include/linux/acct.h>). It is
152 up to the user level program to do useful things with this
153 information. This is generally a good idea, so say Y.
154
155config BSD_PROCESS_ACCT_V3
156 bool "BSD Process Accounting version 3 file format"
157 depends on BSD_PROCESS_ACCT
158 default n
159 help
160 If you say Y here, the process accounting information is written
161 in a new file format that also logs the process IDs of each
162 process and it's parent. Note that this file format is incompatible
163 with previous v0/v1/v2 file formats, so you will need updated tools
164 for processing it. A preliminary version of these tools is available
165 at <http://www.physik3.uni-rostock.de/tim/kernel/utils/acct/>.
166
Shailabh Nagarc7572492006-07-14 00:24:40 -0700167config TASKSTATS
168 bool "Export task/process statistics through netlink (EXPERIMENTAL)"
169 depends on NET
170 default n
171 help
172 Export selected statistics for tasks/processes through the
173 generic netlink interface. Unlike BSD process accounting, the
174 statistics are available during the lifetime of tasks/processes as
175 responses to commands. Like BSD accounting, they are sent to user
176 space on task exit.
177
178 Say N if unsure.
179
Shailabh Nagarca74e922006-07-14 00:24:36 -0700180config TASK_DELAY_ACCT
181 bool "Enable per-task delay accounting (EXPERIMENTAL)"
Shailabh Nagar6f449932006-07-14 00:24:41 -0700182 depends on TASKSTATS
Shailabh Nagarca74e922006-07-14 00:24:36 -0700183 help
184 Collect information on time spent by a task waiting for system
185 resources like cpu, synchronous block I/O completion and swapping
186 in pages. Such statistics can help in setting a task's priorities
187 relative to other tasks for cpu, io, rss limits etc.
188
189 Say N if unsure.
190
Alexey Dobriyan18f705f2007-02-10 01:46:44 -0800191config TASK_XACCT
192 bool "Enable extended accounting over taskstats (EXPERIMENTAL)"
193 depends on TASKSTATS
194 help
195 Collect extended task accounting data and send the data
196 to userland for processing over the taskstats interface.
197
198 Say N if unsure.
199
200config TASK_IO_ACCOUNTING
201 bool "Enable per-task storage I/O accounting (EXPERIMENTAL)"
202 depends on TASK_XACCT
203 help
204 Collect information on the number of bytes of storage I/O which this
205 task has caused.
206
207 Say N if unsure.
208
Cedric Le Goateracce2922007-07-15 23:40:59 -0700209config USER_NS
210 bool "User Namespaces (EXPERIMENTAL)"
211 default n
212 depends on EXPERIMENTAL
213 help
214 Support user namespaces. This allows containers, i.e.
215 vservers, to use user namespaces to provide different
216 user info for different servers. If unsure, say N.
217
Eric W. Biederman57d5f662007-11-14 17:00:13 -0800218config PID_NS
219 bool "PID Namespaces (EXPERIMENTAL)"
220 default n
221 depends on EXPERIMENTAL
222 help
223 Suport process id namespaces. This allows having multiple
224 process with the same pid as long as they are in different
225 pid namespaces. This is a building block of containers.
226
227 Unless you want to work with an experimental feature
228 say N here.
229
Linus Torvalds1da177e2005-04-16 15:20:36 -0700230config AUDIT
231 bool "Auditing support"
Chris Wright804a6a42005-05-11 10:52:45 +0100232 depends on NET
Linus Torvalds1da177e2005-04-16 15:20:36 -0700233 help
234 Enable auditing infrastructure that can be used with another
235 kernel subsystem, such as SELinux (which requires this for
236 logging of avc messages output). Does not do system-call
237 auditing without CONFIG_AUDITSYSCALL.
238
239config AUDITSYSCALL
240 bool "Enable system-call auditing support"
Martin Schwidefsky347a8dc2006-01-06 00:19:28 -0800241 depends on AUDIT && (X86 || PPC || PPC64 || S390 || IA64 || UML || SPARC64)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700242 default y if SECURITY_SELINUX
243 help
244 Enable low-overhead system-call auditing infrastructure that
245 can be used independently or with another kernel subsystem,
Amy Griffisf368c07d2006-04-07 16:55:56 -0400246 such as SELinux. To use audit's filesystem watch feature, please
247 ensure that INOTIFY is configured.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700248
Al Viro74c3cbe2007-07-22 08:04:18 -0400249config AUDIT_TREE
250 def_bool y
251 depends on AUDITSYSCALL && INOTIFY
252
Linus Torvalds1da177e2005-04-16 15:20:36 -0700253config IKCONFIG
Ross Birof2443ab2006-09-30 23:27:25 -0700254 tristate "Kernel .config support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700255 ---help---
256 This option enables the complete Linux kernel ".config" file
257 contents to be saved in the kernel. It provides documentation
258 of which kernel options are used in a running kernel or in an
259 on-disk kernel. This information can be extracted from the kernel
260 image file with the script scripts/extract-ikconfig and used as
261 input to rebuild the current kernel or to build another kernel.
262 It can also be extracted from a running kernel by reading
263 /proc/config.gz if enabled (below).
264
265config IKCONFIG_PROC
266 bool "Enable access to .config through /proc/config.gz"
267 depends on IKCONFIG && PROC_FS
268 ---help---
269 This option enables access to the kernel configuration file
270 through /proc/config.gz.
271
Alistair John Strachan794543a2007-05-08 00:31:15 -0700272config LOG_BUF_SHIFT
273 int "Kernel log buffer size (16 => 64KB, 17 => 128KB)"
274 range 12 21
275 default 17 if S390 || LOCKDEP
276 default 16 if X86_NUMAQ || IA64
277 default 15 if SMP
278 default 14
279 help
280 Select kernel log buffer size as a power of 2.
281 Defaults and Examples:
282 17 => 128 KB for S/390
283 16 => 64 KB for x86 NUMAQ or IA-64
284 15 => 32 KB for SMP
285 14 => 16 KB for uniprocessor
286 13 => 8 KB
287 12 => 4 KB
288
Paul Menageddbcc7e2007-10-18 23:39:30 -0700289config CGROUPS
290 bool "Control Group support"
291 help
292 This option will let you use process cgroup subsystems
293 such as Cpusets
294
295 Say N if unsure.
296
Paul Menage006cb992007-10-18 23:39:43 -0700297config CGROUP_DEBUG
298 bool "Example debug cgroup subsystem"
299 depends on CGROUPS
300 help
301 This option enables a simple cgroup subsystem that
302 exports useful debugging information about the cgroups
303 framework
304
305 Say N if unsure
306
Serge E. Hallyn858d72e2007-10-18 23:39:45 -0700307config CGROUP_NS
308 bool "Namespace cgroup subsystem"
309 depends on CGROUPS
310 help
311 Provides a simple namespace cgroup subsystem to
312 provide hierarchical naming of sets of namespaces,
313 for instance virtual servers and checkpoint/restart
314 jobs.
315
Linus Torvalds1da177e2005-04-16 15:20:36 -0700316config CPUSETS
317 bool "Cpuset support"
Paul Menage8793d852007-10-18 23:39:39 -0700318 depends on SMP && CGROUPS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700319 help
Randy Dunlapd9fd8a62005-07-27 11:45:11 -0700320 This option will let you create and manage CPUSETs which
Linus Torvalds1da177e2005-04-16 15:20:36 -0700321 allow dynamically partitioning a system into sets of CPUs and
322 Memory Nodes and assigning tasks to run only within those sets.
323 This is primarily useful on large SMP or NUMA systems.
324
325 Say N if unsure.
326
Srivatsa Vaddagiri29f59db2007-10-15 17:00:07 +0200327config FAIR_GROUP_SCHED
Srivatsa Vaddagirifb615582007-10-15 17:00:12 +0200328 bool "Fair group CPU scheduler"
Ingo Molnarde8d5852007-10-15 17:00:09 +0200329 default y
Srivatsa Vaddagiri29f59db2007-10-15 17:00:07 +0200330 help
Srivatsa Vaddagirifb615582007-10-15 17:00:12 +0200331 This feature lets CPU scheduler recognize task groups and control CPU
Srivatsa Vaddagiri9b5b7752007-10-15 17:00:09 +0200332 bandwidth allocation to such task groups.
Srivatsa Vaddagiri29f59db2007-10-15 17:00:07 +0200333
Srivatsa Vaddagiri24e377a2007-10-15 17:00:09 +0200334choice
335 depends on FAIR_GROUP_SCHED
336 prompt "Basis for grouping tasks"
337 default FAIR_USER_SCHED
338
Srivatsa Vaddagirifb615582007-10-15 17:00:12 +0200339config FAIR_USER_SCHED
340 bool "user id"
341 help
342 This option will choose userid as the basis for grouping
343 tasks, thus providing equal CPU bandwidth to each user.
Srivatsa Vaddagiri24e377a2007-10-15 17:00:09 +0200344
Srivatsa Vaddagiri68318b82007-10-18 23:41:03 -0700345config FAIR_CGROUP_SCHED
346 bool "Control groups"
347 depends on CGROUPS
348 help
349 This option allows you to create arbitrary task groups
350 using the "cgroup" pseudo filesystem and control
351 the cpu bandwidth allocated to each such task group.
352 Refer to Documentation/cgroups.txt for more information
353 on "cgroup" pseudo filesystem.
354
Srivatsa Vaddagiri24e377a2007-10-15 17:00:09 +0200355endchoice
356
Srivatsa Vaddagirid842de82007-12-02 20:04:49 +0100357config CGROUP_CPUACCT
358 bool "Simple CPU accounting cgroup subsystem"
359 depends on CGROUPS
360 help
361 Provides a simple Resource Controller for monitoring the
362 total CPU consumed by the tasks in a cgroup
363
Kay Sievers88a22c92006-09-14 11:23:28 +0200364config SYSFS_DEPRECATED
365 bool "Create deprecated sysfs files"
366 default y
367 help
368 This option creates deprecated symlinks such as the
369 "device"-link, the <subsystem>:<name>-link, and the
370 "bus"-link. It may also add deprecated key in the
371 uevent environment.
372 None of these features or values should be used today, as
373 they export driver core implementation details to userspace
374 or export properties which can't be kept stable across kernel
375 releases.
376
377 If enabled, this option will also move any device structures
David Sterba3dde6ad2007-05-09 07:12:20 +0200378 that belong to a class, back into the /sys/class hierarchy, in
Kay Sievers88a22c92006-09-14 11:23:28 +0200379 order to support older versions of udev.
380
381 If you are using a distro that was released in 2006 or later,
382 it should be safe to say N here.
383
Paul Menage8793d852007-10-18 23:39:39 -0700384config PROC_PID_CPUSET
385 bool "Include legacy /proc/<pid>/cpuset file"
386 depends on CPUSETS
387 default y
388
Jens Axboeb86ff982006-03-23 19:56:55 +0100389config RELAY
390 bool "Kernel->user space relay support (formerly relayfs)"
391 help
392 This option enables support for relay interface support in
393 certain file systems (such as debugfs).
394 It is designed to provide an efficient mechanism for tools and
395 facilities to relay large amounts of data from kernel space to
396 user space.
397
398 If unsure, say N.
399
Dimitri Gorokhovikf9916332007-03-06 01:42:17 -0800400config BLK_DEV_INITRD
401 bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
402 depends on BROKEN || !FRV
403 help
404 The initial RAM filesystem is a ramfs which is loaded by the
405 boot loader (loadlin or lilo) and that is mounted as root
406 before the normal boot procedure. It is typically used to
407 load modules needed to mount the "real" root file system,
408 etc. See <file:Documentation/initrd.txt> for details.
409
410 If RAM disk support (BLK_DEV_RAM) is also included, this
411 also enables initial RAM disk (initrd) support and adds
412 15 Kbytes (more on some other architectures) to the kernel size.
413
414 If unsure say Y.
415
Jean-Paul Samanc33df4e2007-02-10 01:44:43 -0800416if BLK_DEV_INITRD
417
Sam Ravnborgdbec4862005-08-10 20:44:50 +0200418source "usr/Kconfig"
419
Jean-Paul Samanc33df4e2007-02-10 01:44:43 -0800420endif
421
Linus Torvaldsc45b4f12005-12-14 18:52:21 -0800422config CC_OPTIMIZE_FOR_SIZE
423 bool "Optimize for size (Look out for broken compilers!)"
424 default y
Paul Mundt32582fa2007-07-25 11:27:05 +0900425 depends on ARM || H8300 || SUPERH || EXPERIMENTAL
Linus Torvaldsc45b4f12005-12-14 18:52:21 -0800426 help
427 Enabling this option will pass "-Os" instead of "-O2" to gcc
428 resulting in a smaller kernel.
429
430 WARNING: some versions of gcc may generate incorrect code with this
431 option. If problems are observed, a gcc upgrade may be needed.
432
433 If unsure, say N.
434
Randy Dunlap08470622006-09-30 23:28:13 -0700435config SYSCTL
436 bool
437
Linus Torvalds1da177e2005-04-16 15:20:36 -0700438menuconfig EMBEDDED
439 bool "Configure standard kernel features (for small systems)"
440 help
441 This option allows certain base kernel options and settings
442 to be disabled or tweaked. This is for specialized
443 environments which can tolerate a "non-standard" kernel.
444 Only use this if you really know what you are doing.
445
Chuck Ebbertae81f9e2006-09-16 12:15:53 -0700446config UID16
447 bool "Enable 16-bit UID system calls" if EMBEDDED
Mike Frysinger529a73f2007-11-23 14:28:44 +0800448 depends on ARM || BLACKFIN || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && SPARC32_COMPAT) || UML || (X86_64 && IA32_EMULATION)
Chuck Ebbertae81f9e2006-09-16 12:15:53 -0700449 default y
450 help
451 This enables the legacy 16-bit UID syscall wrappers.
452
Eric W. Biedermanb89a8172006-09-27 01:51:04 -0700453config SYSCTL_SYSCALL
Randy Dunlap08470622006-09-30 23:28:13 -0700454 bool "Sysctl syscall support" if EMBEDDED
Eric W. Biederman13bb7e32006-11-08 17:44:51 -0800455 default y
Eric W. Biedermanb89a8172006-09-27 01:51:04 -0700456 select SYSCTL
457 ---help---
Eric W. Biederman13bb7e32006-11-08 17:44:51 -0800458 sys_sysctl uses binary paths that have been found challenging
459 to properly maintain and use. The interface in /proc/sys
460 using paths with ascii names is now the primary path to this
461 information.
Eric W. Biedermanb89a8172006-09-27 01:51:04 -0700462
Eric W. Biederman13bb7e32006-11-08 17:44:51 -0800463 Almost nothing using the binary sysctl interface so if you are
464 trying to save some space it is probably safe to disable this,
465 making your kernel marginally smaller.
Eric W. Biedermanb89a8172006-09-27 01:51:04 -0700466
Eric W. Biederman13bb7e32006-11-08 17:44:51 -0800467 If unsure say Y here.
Chuck Ebbertae81f9e2006-09-16 12:15:53 -0700468
Linus Torvalds1da177e2005-04-16 15:20:36 -0700469config KALLSYMS
Jesper Juhl979c6a12006-12-12 19:25:11 +0100470 bool "Load all symbols for debugging/ksymoops" if EMBEDDED
Linus Torvalds1da177e2005-04-16 15:20:36 -0700471 default y
472 help
473 Say Y here to let the kernel print out symbolic crash information and
474 symbolic stack backtraces. This increases the size of the kernel
475 somewhat, as all symbols have to be loaded into the kernel image.
476
477config KALLSYMS_ALL
478 bool "Include all symbols in kallsyms"
479 depends on DEBUG_KERNEL && KALLSYMS
480 help
481 Normally kallsyms only contains the symbols of functions, for nicer
482 OOPS messages. Some debuggers can use kallsyms for other
Jesper Juhlf9f97bc2005-07-20 05:43:05 +0200483 symbols too: say Y here to include all symbols, if you need them
484 and you don't care about adding 300k to the size of your kernel.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700485
486 Say N.
487
488config KALLSYMS_EXTRA_PASS
489 bool "Do an extra kallsyms pass"
490 depends on KALLSYMS
491 help
492 If kallsyms is not working correctly, the build will fail with
493 inconsistent kallsyms data. If that occurs, log a bug report and
494 turn on KALLSYMS_EXTRA_PASS which should result in a stable build.
495 Always say N here unless you find a bug in kallsyms, which must be
496 reported. KALLSYMS_EXTRA_PASS is only a temporary workaround while
497 you wait for kallsyms to be fixed.
498
Matt Mackalld59745c2005-05-01 08:59:02 -0700499
Greg Kroah-Hartman712f47c2005-11-16 11:27:07 -0800500config HOTPLUG
501 bool "Support for hot-pluggable devices" if EMBEDDED
502 default y
503 help
504 This option is provided for the case where no hotplug or uevent
505 capabilities is wanted by the kernel. You should only consider
506 disabling this option for embedded systems that do not use modules, a
507 dynamic /dev tree, or dynamic device discovery. Just say Y.
508
Matt Mackalld59745c2005-05-01 08:59:02 -0700509config PRINTK
510 default y
511 bool "Enable support for printk" if EMBEDDED
512 help
513 This option enables normal printk support. Removing it
514 eliminates most of the message strings from the kernel image
515 and makes the kernel more or less silent. As this makes it
516 very difficult to diagnose system problems, saying N here is
517 strongly discouraged.
518
Matt Mackallc8538a72005-05-01 08:59:01 -0700519config BUG
520 bool "BUG() support" if EMBEDDED
521 default y
522 help
523 Disabling this option eliminates support for BUG and WARN, reducing
524 the size of your kernel image and potentially quietly ignoring
525 numerous fatal conditions. You should only consider disabling this
526 option for embedded systems with no facilities for reporting errors.
527 Just say Y.
528
Matt Mackall708e9a72006-01-08 01:05:25 -0800529config ELF_CORE
530 default y
531 bool "Enable ELF core dumps" if EMBEDDED
532 help
533 Enable support for generating core dumps. Disabling saves about 4k.
534
Linus Torvalds1da177e2005-04-16 15:20:36 -0700535config BASE_FULL
536 default y
537 bool "Enable full-sized data structures for core" if EMBEDDED
538 help
539 Disabling this option reduces the size of miscellaneous core
540 kernel data structures. This saves memory on small machines,
541 but may reduce performance.
542
543config FUTEX
544 bool "Enable futex support" if EMBEDDED
545 default y
Ingo Molnar23f78d42006-06-27 02:54:53 -0700546 select RT_MUTEXES
Linus Torvalds1da177e2005-04-16 15:20:36 -0700547 help
548 Disabling this option will cause the kernel to be built without
549 support for "fast userspace mutexes". The resulting kernel may not
550 run glibc-based applications correctly.
551
Davide Libenzi5dc8bf82007-05-10 22:23:11 -0700552config ANON_INODES
Adrian Bunk448e3ce2007-07-31 00:39:10 -0700553 bool
Davide Libenzi5dc8bf82007-05-10 22:23:11 -0700554
Linus Torvalds1da177e2005-04-16 15:20:36 -0700555config EPOLL
556 bool "Enable eventpoll support" if EMBEDDED
557 default y
Adrian Bunk448e3ce2007-07-31 00:39:10 -0700558 select ANON_INODES
Linus Torvalds1da177e2005-04-16 15:20:36 -0700559 help
560 Disabling this option will cause the kernel to be built without
561 support for epoll family of system calls.
562
Davide Libenzifba2afa2007-05-10 22:23:13 -0700563config SIGNALFD
564 bool "Enable signalfd() system call" if EMBEDDED
Adrian Bunk448e3ce2007-07-31 00:39:10 -0700565 select ANON_INODES
Davide Libenzifba2afa2007-05-10 22:23:13 -0700566 default y
567 help
568 Enable the signalfd() system call that allows to receive signals
569 on a file descriptor.
570
571 If unsure, say Y.
572
Davide Libenzib215e282007-05-10 22:23:16 -0700573config TIMERFD
574 bool "Enable timerfd() system call" if EMBEDDED
Adrian Bunk448e3ce2007-07-31 00:39:10 -0700575 select ANON_INODES
Andrew Mortone4260192007-09-18 22:46:41 -0700576 depends on BROKEN
Davide Libenzib215e282007-05-10 22:23:16 -0700577 default y
578 help
579 Enable the timerfd() system call that allows to receive timer
580 events on a file descriptor.
581
582 If unsure, say Y.
583
Davide Libenzie1ad7462007-05-10 22:23:19 -0700584config EVENTFD
585 bool "Enable eventfd() system call" if EMBEDDED
Adrian Bunk448e3ce2007-07-31 00:39:10 -0700586 select ANON_INODES
Davide Libenzie1ad7462007-05-10 22:23:19 -0700587 default y
588 help
589 Enable the eventfd() system call that allows to receive both
590 kernel notification (ie. KAIO) or userspace notifications.
591
592 If unsure, say Y.
593
Linus Torvalds1da177e2005-04-16 15:20:36 -0700594config SHMEM
595 bool "Use full shmem filesystem" if EMBEDDED
596 default y
597 depends on MMU
598 help
599 The shmem is an internal filesystem used to manage shared memory.
600 It is backed by swap and manages resource limits. It is also exported
601 to userspace as tmpfs if TMPFS is enabled. Disabling this
602 option replaces shmem and tmpfs with the much simpler ramfs code,
603 which may be appropriate on small systems without swap.
604
Christoph Lameterf8891e52006-06-30 01:55:45 -0700605config VM_EVENT_COUNTERS
606 default y
607 bool "Enable VM event counters for /proc/vmstat" if EMBEDDED
608 help
Paul Jackson2aea4fb2006-12-22 01:06:10 -0800609 VM event counters are needed for event counts to be shown.
610 This option allows the disabling of the VM event counters
611 on EMBEDDED systems. /proc/vmstat will only show page counts
612 if VM event counters are disabled.
Christoph Lameterf8891e52006-06-30 01:55:45 -0700613
Christoph Lameter41ecc552007-05-09 02:32:44 -0700614config SLUB_DEBUG
615 default y
616 bool "Enable SLUB debugging support" if EMBEDDED
Christoph Lameterd4751a22007-05-10 03:15:40 -0700617 depends on SLUB
Christoph Lameter41ecc552007-05-09 02:32:44 -0700618 help
619 SLUB has extensive debug support features. Disabling these can
620 result in significant savings in code size. This also disables
621 SLUB sysfs support. /sys/slab will not exist and there will be
622 no support for cache validation etc.
623
Christoph Lameter81819f02007-05-06 14:49:36 -0700624choice
625 prompt "Choose SLAB allocator"
Christoph Lametera0acd822007-07-17 04:03:32 -0700626 default SLUB
Christoph Lameter81819f02007-05-06 14:49:36 -0700627 help
628 This option allows to select a slab allocator.
629
630config SLAB
631 bool "SLAB"
632 help
633 The regular slab allocator that is established and known to work
Christoph Lameter34013882007-05-09 02:32:47 -0700634 well in all environments. It organizes cache hot objects in
Christoph Lameter81819f02007-05-06 14:49:36 -0700635 per cpu and per node queues. SLAB is the default choice for
Christoph Lameter34013882007-05-09 02:32:47 -0700636 a slab allocator.
Christoph Lameter81819f02007-05-06 14:49:36 -0700637
638config SLUB
Christoph Lameter81819f02007-05-06 14:49:36 -0700639 bool "SLUB (Unqueued Allocator)"
640 help
641 SLUB is a slab allocator that minimizes cache line usage
642 instead of managing queues of cached objects (SLAB approach).
643 Per cpu caching is realized using slabs of objects instead
644 of queues of objects. SLUB can use memory efficiently
Christoph Lameter34013882007-05-09 02:32:47 -0700645 and has enhanced diagnostics.
Christoph Lameter81819f02007-05-06 14:49:36 -0700646
647config SLOB
Paul Mundt84a01c22007-07-15 23:38:24 -0700648 depends on EMBEDDED
Christoph Lameter81819f02007-05-06 14:49:36 -0700649 bool "SLOB (Simple Allocator)"
650 help
651 SLOB replaces the SLAB allocator with a drastically simpler
Nick Pigginafc0ced2007-05-16 22:10:49 -0700652 allocator. SLOB is more space efficient than SLAB but does not
Christoph Lameter34013882007-05-09 02:32:47 -0700653 scale well (single lock for all operations) and is also highly
654 susceptible to fragmentation. SLUB can accomplish a higher object
655 density. It is usually better to use SLUB instead of SLOB.
Christoph Lameter81819f02007-05-06 14:49:36 -0700656
657endchoice
658
Linus Torvalds1da177e2005-04-16 15:20:36 -0700659endmenu # General setup
660
Linus Torvalds158a9622008-01-02 13:04:48 -0800661config SLABINFO
662 bool
663 depends on PROC_FS
664 depends on SLAB || SLUB
665 default y
666
Chuck Ebbertae81f9e2006-09-16 12:15:53 -0700667config RT_MUTEXES
668 boolean
669 select PLIST
670
Linus Torvalds1da177e2005-04-16 15:20:36 -0700671config TINY_SHMEM
672 default !SHMEM
673 bool
674
675config BASE_SMALL
676 int
677 default 0 if BASE_FULL
678 default 1 if !BASE_FULL
679
Jan Engelhardt66da5732007-07-15 23:39:29 -0700680menuconfig MODULES
Linus Torvalds1da177e2005-04-16 15:20:36 -0700681 bool "Enable loadable module support"
682 help
683 Kernel modules are small pieces of compiled code which can
684 be inserted in the running kernel, rather than being
685 permanently built into the kernel. You use the "modprobe"
686 tool to add (and sometimes remove) them. If you say Y here,
687 many parts of the kernel can be built as modules (by
688 answering M instead of Y where indicated): this is most
689 useful for infrequently used options which are not required
690 for booting. For more information, see the man pages for
691 modprobe, lsmod, modinfo, insmod and rmmod.
692
693 If you say Y here, you will need to run "make
694 modules_install" to put the modules under /lib/modules/
695 where modprobe can find them (you may need to be root to do
696 this).
697
698 If unsure, say Y.
699
700config MODULE_UNLOAD
701 bool "Module unloading"
702 depends on MODULES
703 help
704 Without this option you will not be able to unload any
705 modules (note that some modules may not be unloadable
706 anyway), which makes your kernel slightly smaller and
707 simpler. If unsure, say Y.
708
709config MODULE_FORCE_UNLOAD
710 bool "Forced module unloading"
711 depends on MODULE_UNLOAD && EXPERIMENTAL
712 help
713 This option allows you to force a module to unload, even if the
714 kernel believes it is unsafe: the kernel will remove the module
715 without waiting for anyone to stop using it (using the -f option to
716 rmmod). This is mainly for kernel developers and desperate users.
717 If unsure, say N.
718
Linus Torvalds1da177e2005-04-16 15:20:36 -0700719config MODVERSIONS
Sam Ravnborg0d541642005-12-26 23:04:02 +0100720 bool "Module versioning support"
721 depends on MODULES
Linus Torvalds1da177e2005-04-16 15:20:36 -0700722 help
723 Usually, you have to use modules compiled with your kernel.
724 Saying Y here makes it sometimes possible to use modules
725 compiled for different kernels, by adding enough information
726 to the modules to (hopefully) spot any changes which would
727 make them incompatible with the kernel you are running. If
728 unsure, say N.
729
730config MODULE_SRCVERSION_ALL
731 bool "Source checksum for all modules"
732 depends on MODULES
733 help
734 Modules which contain a MODULE_VERSION get an extra "srcversion"
735 field inserted into their modinfo section, which contains a
736 sum of the source files which made it. This helps maintainers
737 see exactly which source was used to build a module (since
738 others sometimes change the module source without updating
739 the version). With this option, such a "srcversion" field
740 will be created for all modules. If unsure, say N.
741
742config KMOD
743 bool "Automatic kernel module loading"
744 depends on MODULES
745 help
746 Normally when you have selected some parts of the kernel to
747 be created as kernel modules, you must load them (using the
748 "modprobe" command) before you can use them. If you say Y
749 here, some parts of the kernel will be able to load modules
750 automatically: when a part of the kernel needs a module, it
751 runs modprobe with the appropriate arguments, thereby
752 loading the module if it is available. If unsure, say Y.
753
754config STOP_MACHINE
755 bool
756 default y
757 depends on (SMP && MODULE_UNLOAD) || HOTPLUG_CPU
758 help
759 Need stop_machine() primitive.
Jens Axboe3a65dfe2005-11-04 08:43:35 +0100760
Jens Axboe3a65dfe2005-11-04 08:43:35 +0100761source "block/Kconfig"
Avi Kivitye98c3202007-10-16 23:27:31 -0700762
763config PREEMPT_NOTIFIERS
764 bool