blob: db655002671f3e0d11139563aeb9ad7adc004b28 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2** -----------------------------------------------------------------------------
3**
4** Perle Specialix driver for Linux
5** Ported from existing RIO Driver for SCO sources.
6 *
7 * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22**
23** Module : riotty.c
24** SID : 1.3
25** Last Modified : 11/6/98 10:33:47
26** Retrieved : 11/6/98 10:33:50
27**
28** ident @(#)riotty.c 1.3
29**
30** -----------------------------------------------------------------------------
31*/
32#ifdef SCCS_LABELS
33static char *_riotty_c_sccs_ = "@(#)riotty.c 1.3";
34#endif
35
36
37#define __EXPLICIT_DEF_H__
38
39#include <linux/module.h>
40#include <linux/slab.h>
41#include <linux/errno.h>
42#include <linux/tty.h>
43#include <linux/string.h>
44#include <asm/io.h>
45#include <asm/system.h>
46#include <asm/string.h>
47#include <asm/semaphore.h>
48#include <asm/uaccess.h>
49
50#include <linux/termios.h>
51
52#include <linux/serial.h>
53
54#include <linux/generic_serial.h>
55
56
57#include "linux_compat.h"
58#include "rio_linux.h"
59#include "typdef.h"
60#include "pkt.h"
61#include "daemon.h"
62#include "rio.h"
63#include "riospace.h"
64#include "top.h"
65#include "cmdpkt.h"
66#include "map.h"
67#include "riotypes.h"
68#include "rup.h"
69#include "port.h"
70#include "riodrvr.h"
71#include "rioinfo.h"
72#include "func.h"
73#include "errors.h"
74#include "pci.h"
75
76#include "parmmap.h"
77#include "unixrup.h"
78#include "board.h"
79#include "host.h"
80#include "error.h"
81#include "phb.h"
82#include "link.h"
83#include "cmdblk.h"
84#include "route.h"
85#include "control.h"
86#include "cirrus.h"
87#include "rioioctl.h"
88#include "param.h"
89#include "list.h"
90#include "sam.h"
91
92#if 0
93static void ttyseth_pv(struct Port *, struct ttystatics *,
94 struct termios *sg, int);
95#endif
96
97static void RIOClearUp(struct Port *PortP);
98int RIOShortCommand(struct rio_info *p, struct Port *PortP,
99 int command, int len, int arg);
100
101#if 0
102static int RIOCookMode(struct ttystatics *);
103#endif
104
105extern int conv_vb[]; /* now defined in ttymgr.c */
106extern int conv_bv[]; /* now defined in ttymgr.c */
107
108/*
109** 16.09.1998 ARG - Fix to build riotty.k.o for Modular Kernel Support
110**
111** ep.def.h is necessary for Modular Kernel Support
112** DO NOT place any kernel 'extern's after this line
113** or this source file will not build riotty.k.o
114*/
115#ifdef uLYNX
116#include <ep.def.h>
117#endif
118
119#ifdef NEED_THIS2
120static struct old_sgttyb
121default_sg =
122{
123 B19200, B19200, /* input and output speed */
124 'H' - '@', /* erase char */
125 -1, /* 2nd erase char */
126 'U' - '@', /* kill char */
127 ECHO | CRMOD, /* mode */
128 'C' - '@', /* interrupt character */
129 '\\' - '@', /* quit char */
130 'Q' - '@', /* start char */
131 'S' - '@', /* stop char */
132 'D' - '@', /* EOF */
133 -1, /* brk */
134 (LCRTBS | LCRTERA | LCRTKIL | LCTLECH), /* local mode word */
135 'Z' - '@', /* process stop */
136 'Y' - '@', /* delayed stop */
137 'R' - '@', /* reprint line */
138 'O' - '@', /* flush output */
139 'W' - '@', /* word erase */
140 'V' - '@' /* literal next char */
141};
142#endif
143
144
145extern struct rio_info *p;
146
147
148int
149riotopen(struct tty_struct * tty, struct file * filp)
150{
151 register uint SysPort;
152 int Modem;
153 int repeat_this = 250;
154 struct Port *PortP; /* pointer to the port structure */
155 unsigned long flags;
156 int retval = 0;
157
158 func_enter ();
159
160 /* Make sure driver_data is NULL in case the rio isn't booted jet. Else gs_close
161 is going to oops.
162 */
163 tty->driver_data = NULL;
164
165 SysPort = rio_minor(tty);
166 Modem = rio_ismodem(tty);
167
168 if ( p->RIOFailed ) {
169 rio_dprintk (RIO_DEBUG_TTY, "System initialisation failed\n");
170 pseterr(ENXIO);
171 func_exit ();
172 return -ENXIO;
173 }
174
175 rio_dprintk (RIO_DEBUG_TTY, "port open SysPort %d (%s) (mapped:%d)\n",
176 SysPort, Modem ? "Modem" : "tty",
177 p->RIOPortp[SysPort]->Mapped);
178
179 /*
180 ** Validate that we have received a legitimate request.
181 ** Currently, just check that we are opening a port on
182 ** a host card that actually exists, and that the port
183 ** has been mapped onto a host.
184 */
185 if (SysPort >= RIO_PORTS) { /* out of range ? */
186 rio_dprintk (RIO_DEBUG_TTY, "Illegal port number %d\n",SysPort);
187 pseterr(ENXIO);
188 func_exit();
189 return -ENXIO;
190 }
191
192 /*
193 ** Grab pointer to the port stucture
194 */
195 PortP = p->RIOPortp[SysPort]; /* Get control struc */
196 rio_dprintk (RIO_DEBUG_TTY, "PortP: %p\n", PortP);
197 if ( !PortP->Mapped ) { /* we aren't mapped yet! */
198 /*
199 ** The system doesn't know which RTA this port
200 ** corresponds to.
201 */
202 rio_dprintk (RIO_DEBUG_TTY, "port not mapped into system\n");
203 func_exit ();
204 pseterr(ENXIO);
205 return -ENXIO;
206 }
207
208 tty->driver_data = PortP;
209
210 PortP->gs.tty = tty;
211 PortP->gs.count++;
212
213 rio_dprintk (RIO_DEBUG_TTY, "%d bytes in tx buffer\n",
214 PortP->gs.xmit_cnt);
215
216 retval = gs_init_port (&PortP->gs);
217 if (retval) {
218 PortP->gs.count--;
219 return -ENXIO;
220 }
221 /*
222 ** If the host hasn't been booted yet, then
223 ** fail
224 */
225 if ( (PortP->HostP->Flags & RUN_STATE) != RC_RUNNING ) {
226 rio_dprintk (RIO_DEBUG_TTY, "Host not running\n");
227 pseterr(ENXIO);
228 func_exit ();
229 return -ENXIO;
230 }
231
232 /*
233 ** If the RTA has not booted yet and the user has choosen to block
234 ** until the RTA is present then we must spin here waiting for
235 ** the RTA to boot.
236 */
237#if 0
238 if (!(PortP->HostP->Mapping[PortP->RupNum].Flags & RTA_BOOTED)) {
239 if (PortP->WaitUntilBooted) {
240 rio_dprintk (RIO_DEBUG_TTY, "Waiting for RTA to boot\n");
241 do {
242 if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) {
243 rio_dprintk (RIO_DEBUG_TTY, "RTA EINTR in delay \n");
244 func_exit ();
245 return -EINTR;
246 }
247 if (repeat_this -- <= 0) {
248 rio_dprintk (RIO_DEBUG_TTY, "Waiting for RTA to boot timeout\n");
249 RIOPreemptiveCmd(p, PortP, FCLOSE );
250 pseterr(EINTR);
251 func_exit ();
252 return -EIO;
253 }
254 } while(!(PortP->HostP->Mapping[PortP->RupNum].Flags & RTA_BOOTED));
255 rio_dprintk (RIO_DEBUG_TTY, "RTA has been booted\n");
256 } else {
257 rio_dprintk (RIO_DEBUG_TTY, "RTA never booted\n");
258 pseterr(ENXIO);
259 func_exit ();
260 return 0;
261 }
262 }
263#else
264 /* I find the above code a bit hairy. I find the below code
265 easier to read and shorter. Now, if it works too that would
266 be great... -- REW
267 */
268 rio_dprintk (RIO_DEBUG_TTY, "Checking if RTA has booted... \n");
269 while (!(PortP->HostP->Mapping[PortP->RupNum].Flags & RTA_BOOTED)) {
270 if (!PortP->WaitUntilBooted) {
271 rio_dprintk (RIO_DEBUG_TTY, "RTA never booted\n");
272 func_exit ();
273 return -ENXIO;
274 }
275
276 /* Under Linux you'd normally use a wait instead of this
277 busy-waiting. I'll stick with the old implementation for
278 now. --REW
279 */
280 if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) {
281 rio_dprintk (RIO_DEBUG_TTY, "RTA_wait_for_boot: EINTR in delay \n");
282 func_exit ();
283 return -EINTR;
284 }
285 if (repeat_this -- <= 0) {
286 rio_dprintk (RIO_DEBUG_TTY, "Waiting for RTA to boot timeout\n");
287 func_exit ();
288 return -EIO;
289 }
290 }
291 rio_dprintk (RIO_DEBUG_TTY, "RTA has been booted\n");
292#endif
293#if 0
294 tp = PortP->TtyP; /* get tty struct */
295#endif
296 rio_spin_lock_irqsave(&PortP->portSem, flags);
297 if ( p->RIOHalted ) {
298 goto bombout;
299 }
300#if 0
301 retval = gs_init_port(&PortP->gs);
302 if (retval){
303 func_exit ();
304 return retval;
305 }
306#endif
307
308 /*
309 ** If the port is in the final throws of being closed,
310 ** we should wait here (politely), waiting
311 ** for it to finish, so that it doesn't close us!
312 */
313 while ( (PortP->State & RIO_CLOSING) && !p->RIOHalted ) {
314 rio_dprintk (RIO_DEBUG_TTY, "Waiting for RIO_CLOSING to go away\n");
315 if (repeat_this -- <= 0) {
316 rio_dprintk (RIO_DEBUG_TTY, "Waiting for not idle closed broken by signal\n");
317 RIOPreemptiveCmd(p, PortP, FCLOSE );
318 retval = -EINTR;
319 goto bombout;
320 }
321 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
322 if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) {
323 rio_spin_lock_irqsave(&PortP->portSem, flags);
324 retval = -EINTR;
325 goto bombout;
326 }
327 rio_spin_lock_irqsave(&PortP->portSem, flags);
328 }
329
330 if ( !PortP->Mapped ) {
331 rio_dprintk (RIO_DEBUG_TTY, "Port unmapped while closing!\n");
332 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
333 retval = -ENXIO;
334 func_exit ();
335 return retval;
336 }
337
338 if ( p->RIOHalted ) {
339 goto bombout;
340 }
341
342/*
343** 15.10.1998 ARG - ESIL 0761 part fix
344** RIO has it's own CTSFLOW and RTSFLOW flags in 'Config' in the port structure,
345** we need to make sure that the flags are clear when the port is opened.
346*/
347 /* Uh? Suppose I turn these on and then another process opens
348 the port again? The flags get cleared! Not good. -- REW */
349 if ( !(PortP->State & (RIO_LOPEN | RIO_MOPEN)) ) {
350 PortP->Config &= ~(RIO_CTSFLOW|RIO_RTSFLOW);
351 }
352
353 if (!(PortP->firstOpen)) { /* First time ? */
354 rio_dprintk (RIO_DEBUG_TTY, "First open for this port\n");
355
356
357 PortP->firstOpen++;
358 PortP->CookMode = 0; /* XXX RIOCookMode(tp); */
359 PortP->InUse = NOT_INUSE;
360
361 /* Tentative fix for bug PR27. Didn't work. */
362 /* PortP->gs.xmit_cnt = 0; */
363
364 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
365#ifdef NEED_THIS
366 ttyseth(PortP, tp, (struct old_sgttyb *)&default_sg);
367#endif
368
369 /* Someone explain to me why this delay/config is
370 here. If I read the docs correctly the "open"
371 command piggybacks the parameters immediately.
372 -- REW */
373 RIOParam(PortP,OPEN,Modem,OK_TO_SLEEP); /* Open the port */
374#if 0
375 /* This delay of 1 second was annoying. I removed it. -- REW */
376 RIODelay(PortP, HUNDRED_MS*10);
377 RIOParam(PortP,CONFIG,Modem,OK_TO_SLEEP); /* Config the port */
378#endif
379 rio_spin_lock_irqsave(&PortP->portSem, flags);
380
381 /*
382 ** wait for the port to be not closed.
383 */
384 while ( !(PortP->PortState & PORT_ISOPEN) && !p->RIOHalted ) {
385 rio_dprintk (RIO_DEBUG_TTY, "Waiting for PORT_ISOPEN-currently %x\n",PortP->PortState);
386/*
387** 15.10.1998 ARG - ESIL 0759
388** (Part) fix for port being trashed when opened whilst RTA "disconnected"
389** Take out the limited wait - now wait for ever or until user
390** bangs us out.
391**
392 if (repeat_this -- <= 0) {
393 rio_dprint(RIO_DEBUG_TTY, ("Waiting for open to finish timed out.\n"));
394 RIOPreemptiveCmd(p, PortP, FCLOSE );
395 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
396 return -EINTR;
397 }
398**
399*/
400 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
401 if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) {
402 rio_dprintk (RIO_DEBUG_TTY, "Waiting for open to finish broken by signal\n");
403 RIOPreemptiveCmd(p, PortP, FCLOSE );
404 func_exit ();
405 return -EINTR;
406 }
407 rio_spin_lock_irqsave(&PortP->portSem, flags);
408 }
409
410 if ( p->RIOHalted ) {
411 retval = -EIO;
412bombout:
413 /* RIOClearUp( PortP ); */
414 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
415 return retval;
416 }
417 rio_dprintk (RIO_DEBUG_TTY, "PORT_ISOPEN found\n");
418 }
419
420#ifdef MODEM_SUPPORT
421 if (Modem) {
422 rio_dprintk (RIO_DEBUG_TTY, "Modem - test for carrier\n");
423 /*
424 ** ACTION
425 ** insert test for carrier here. -- ???
426 ** I already see that test here. What's the deal? -- REW
427 */
428 if ((PortP->gs.tty->termios->c_cflag & CLOCAL) || (PortP->ModemState & MSVR1_CD))
429 {
430 rio_dprintk (RIO_DEBUG_TTY, "open(%d) Modem carr on\n", SysPort);
431 /*
432 tp->tm.c_state |= CARR_ON;
433 wakeup((caddr_t) &tp->tm.c_canq);
434 */
435 PortP->State |= RIO_CARR_ON;
436 wake_up_interruptible (&PortP->gs.open_wait);
437 }
438 else /* no carrier - wait for DCD */
439 {
440 /*
441 while (!(PortP->gs.tty->termios->c_state & CARR_ON) &&
442 !(filp->f_flags & O_NONBLOCK) && !p->RIOHalted )
443 */
444 while (!(PortP->State & RIO_CARR_ON) &&
445 !(filp->f_flags & O_NONBLOCK) && !p->RIOHalted ) {
446
447 rio_dprintk (RIO_DEBUG_TTY, "open(%d) sleeping for carr on\n",SysPort);
448 /*
449 PortP->gs.tty->termios->c_state |= WOPEN;
450 */
451 PortP->State |= RIO_WOPEN;
452 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
453 if (RIODelay (PortP, HUNDRED_MS) == RIO_FAIL)
454#if 0
455 if ( sleep((caddr_t)&tp->tm.c_canqo, TTIPRI|PCATCH))
456#endif
457 {
458 /*
459 ** ACTION: verify that this is a good thing
460 ** to do here. -- ???
461 ** I think it's OK. -- REW
462 */
463 rio_dprintk (RIO_DEBUG_TTY, "open(%d) sleeping for carr broken by signal\n",
464 SysPort);
465 RIOPreemptiveCmd( p, PortP, FCLOSE );
466 /*
467 tp->tm.c_state &= ~WOPEN;
468 */
469 PortP->State &= ~RIO_WOPEN;
470 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
471 func_exit ();
472 return -EINTR;
473 }
474 }
475 PortP->State &= ~RIO_WOPEN;
476 }
477 if ( p->RIOHalted )
478 goto bombout;
479 rio_dprintk (RIO_DEBUG_TTY, "Setting RIO_MOPEN\n");
480 PortP->State |= RIO_MOPEN;
481 }
482 else
483#endif
484 {
485 /*
486 ** ACTION
487 ** Direct line open - force carrier (will probably mean
488 ** that sleeping Modem line fubar)
489 */
490 PortP->State |= RIO_LOPEN;
491 }
492
493 if ( p->RIOHalted ) {
494 goto bombout;
495 }
496
497 rio_dprintk (RIO_DEBUG_TTY, "high level open done\n");
498
499#ifdef STATS
500 PortP->Stat.OpenCnt++;
501#endif
502 /*
503 ** Count opens for port statistics reporting
504 */
505 if (PortP->statsGather)
506 PortP->opens++;
507
508 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
509 rio_dprintk (RIO_DEBUG_TTY, "Returning from open\n");
510 func_exit ();
511 return 0;
512}
513
514/*
515** RIOClose the port.
516** The operating system thinks that this is last close for the device.
517** As there are two interfaces to the port (Modem and tty), we need to
518** check that both are closed before we close the device.
519*/
520int
521riotclose(void *ptr)
522{
523#if 0
524 register uint SysPort = dev;
525 struct ttystatics *tp; /* pointer to our ttystruct */
526#endif
527 struct Port *PortP =ptr; /* pointer to the port structure */
528 int deleted = 0;
529 int try = -1; /* Disable the timeouts by setting them to -1 */
530 int repeat_this = -1; /* Congrats to those having 15 years of
531 uptime! (You get to break the driver.) */
532 long end_time;
533 struct tty_struct * tty;
534 unsigned long flags;
535 int Modem;
536 int rv =0;
537
538 rio_dprintk (RIO_DEBUG_TTY, "port close SysPort %d\n",PortP->PortNum);
539
540 /* PortP = p->RIOPortp[SysPort]; */
541 rio_dprintk (RIO_DEBUG_TTY, "Port is at address 0x%x\n",(int)PortP);
542 /* tp = PortP->TtyP;*/ /* Get tty */
543 tty = PortP->gs.tty;
544 rio_dprintk (RIO_DEBUG_TTY, "TTY is at address 0x%x\n",(int)tty);
545
546 if (PortP->gs.closing_wait)
547 end_time = jiffies + PortP->gs.closing_wait;
548 else
549 end_time = jiffies + MAX_SCHEDULE_TIMEOUT;
550
551 Modem = rio_ismodem(tty);
552#if 0
553 /* What F.CKING cache? Even then, a higly idle multiprocessor,
554 system with large caches this won't work . Better find out when
555 this doesn't work asap, and fix the cause. -- REW */
556
557 RIODelay(PortP, HUNDRED_MS*10); /* To flush the cache */
558#endif
559 rio_spin_lock_irqsave(&PortP->portSem, flags);
560
561 /*
562 ** Setting this flag will make any process trying to open
563 ** this port block until we are complete closing it.
564 */
565 PortP->State |= RIO_CLOSING;
566
567 if ( (PortP->State & RIO_DELETED) ) {
568 rio_dprintk (RIO_DEBUG_TTY, "Close on deleted RTA\n");
569 deleted = 1;
570 }
571
572 if ( p->RIOHalted ) {
573 RIOClearUp( PortP );
574 rv = -EIO;
575 goto close_end;
576 }
577
578 rio_dprintk (RIO_DEBUG_TTY, "Clear bits\n");
579 /*
580 ** clear the open bits for this device
581 */
582 PortP->State &= (Modem ? ~RIO_MOPEN : ~RIO_LOPEN);
583 PortP->State &= ~RIO_CARR_ON;
584 PortP->ModemState &= ~MSVR1_CD;
585 /*
586 ** If the device was open as both a Modem and a tty line
587 ** then we need to wimp out here, as the port has not really
588 ** been finally closed (gee, whizz!) The test here uses the
589 ** bit for the OTHER mode of operation, to see if THAT is
590 ** still active!
591 */
592 if ( (PortP->State & (RIO_LOPEN|RIO_MOPEN)) ) {
593 /*
594 ** The port is still open for the other task -
595 ** return, pretending that we are still active.
596 */
597 rio_dprintk (RIO_DEBUG_TTY, "Channel %d still open !\n",PortP->PortNum);
598 PortP->State &= ~RIO_CLOSING;
599 if (PortP->firstOpen)
600 PortP->firstOpen--;
601 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
602 return -EIO;
603 }
604
605 rio_dprintk (RIO_DEBUG_TTY, "Closing down - everything must go!\n");
606
607 PortP->State &= ~RIO_DYNOROD;
608
609 /*
610 ** This is where we wait for the port
611 ** to drain down before closing. Bye-bye....
612 ** (We never meant to do this)
613 */
614 rio_dprintk (RIO_DEBUG_TTY, "Timeout 1 starts\n");
615
616 if (!deleted)
617 while ( (PortP->InUse != NOT_INUSE) && !p->RIOHalted &&
618 (PortP->TxBufferIn != PortP->TxBufferOut) ) {
619 cprintf("Need to flush the ttyport\n");
620 if (repeat_this -- <= 0) {
621 rv = -EINTR;
622 rio_dprintk (RIO_DEBUG_TTY, "Waiting for not idle closed broken by signal\n");
623 RIOPreemptiveCmd(p, PortP, FCLOSE );
624 goto close_end;
625 }
626 rio_dprintk (RIO_DEBUG_TTY, "Calling timeout to flush in closing\n");
627 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
628 if (RIODelay_ni(PortP, HUNDRED_MS*10) == RIO_FAIL) {
629 rio_dprintk (RIO_DEBUG_TTY, "RTA EINTR in delay \n");
630 rv = -EINTR;
631 rio_spin_lock_irqsave(&PortP->portSem, flags);
632 goto close_end;
633 }
634 rio_spin_lock_irqsave(&PortP->portSem, flags);
635 }
636
637 PortP->TxBufferIn = PortP->TxBufferOut = 0;
638 repeat_this = 0xff;
639
640 PortP->InUse = 0;
641 if ( (PortP->State & (RIO_LOPEN|RIO_MOPEN)) ) {
642 /*
643 ** The port has been re-opened for the other task -
644 ** return, pretending that we are still active.
645 */
646 rio_dprintk (RIO_DEBUG_TTY, "Channel %d re-open!\n", PortP->PortNum);
647 PortP->State &= ~RIO_CLOSING;
648 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
649 if (PortP->firstOpen)
650 PortP->firstOpen--;
651 return -EIO;
652 }
653
654 if ( p->RIOHalted ) {
655 RIOClearUp( PortP );
656 goto close_end;
657 }
658
659
660
661 /* Can't call RIOShortCommand with the port locked. */
662 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
663
664 if (RIOShortCommand(p, PortP, CLOSE, 1, 0) == RIO_FAIL) {
665 RIOPreemptiveCmd(p, PortP,FCLOSE);
666 goto close_end;
667 }
668
669 if (!deleted)
670 while (try && (PortP->PortState & PORT_ISOPEN)) {
671 try--;
672 if (time_after (jiffies, end_time)) {
673 rio_dprintk (RIO_DEBUG_TTY, "Run out of tries - force the bugger shut!\n" );
674 RIOPreemptiveCmd(p, PortP,FCLOSE);
675 break;
676 }
677 rio_dprintk (RIO_DEBUG_TTY, "Close: PortState:ISOPEN is %d\n",
678 PortP->PortState & PORT_ISOPEN);
679
680 if ( p->RIOHalted ) {
681 RIOClearUp( PortP );
682 goto close_end;
683 }
684 if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) {
685 rio_dprintk (RIO_DEBUG_TTY, "RTA EINTR in delay \n");
686 RIOPreemptiveCmd(p, PortP,FCLOSE);
687 break;
688 }
689 }
690 rio_spin_lock_irqsave(&PortP->portSem, flags);
691 rio_dprintk (RIO_DEBUG_TTY, "Close: try was %d on completion\n", try );
692
693 /* RIOPreemptiveCmd(p, PortP, FCLOSE); */
694
695/*
696** 15.10.1998 ARG - ESIL 0761 part fix
697** RIO has it's own CTSFLOW and RTSFLOW flags in 'Config' in the port structure,** we need to make sure that the flags are clear when the port is opened.
698*/
699 PortP->Config &= ~(RIO_CTSFLOW|RIO_RTSFLOW);
700
701
702#ifdef STATS
703 PortP->Stat.CloseCnt++;
704#endif
705 /*
706 ** Count opens for port statistics reporting
707 */
708 if (PortP->statsGather)
709 PortP->closes++;
710
711close_end:
712 /* XXX: Why would a "DELETED" flag be reset here? I'd have
713 thought that a "deleted" flag means that the port was
714 permanently gone, but here we can make it reappear by it
715 being in close during the "deletion".
716 */
717 PortP->State &= ~(RIO_CLOSING|RIO_DELETED);
718 if (PortP->firstOpen)
719 PortP->firstOpen--;
720 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
721 rio_dprintk (RIO_DEBUG_TTY, "Return from close\n");
722 return rv;
723}
724
725
726/*
727** decide if we need to use the line discipline.
728** This routine can return one of three values:
729** COOK_RAW if no processing has to be done by the line discipline or the card
730** COOK_WELL if the line discipline must be used to do the processing
731** COOK_MEDIUM if the card can do all the processing necessary.
732*/
733#if 0
734static int
735RIOCookMode(struct ttystatics *tp)
736{
737 /*
738 ** We can't handle tm.c_mstate != 0 on SCO
739 ** We can't handle mapping
740 ** We can't handle non-ttwrite line disc.
741 ** We can't handle lflag XCASE
742 ** We can handle oflag OPOST & (OCRNL, ONLCR, TAB3)
743 */
744
745#ifdef CHECK
746 CheckTtyP( tp );
747#endif
748 if (!(tp->tm.c_oflag & OPOST)) /* No post processing */
749 return COOK_RAW; /* Raw mode o/p */
750
751 if ( tp->tm.c_lflag & XCASE )
752 return COOK_WELL; /* Use line disc */
753
754 if (tp->tm.c_oflag & ~(OPOST | ONLCR | OCRNL | TAB3 ) )
755 return COOK_WELL; /* Use line disc for strange modes */
756
757 if ( tp->tm.c_oflag == OPOST ) /* If only OPOST is set, do RAW */
758 return COOK_RAW;
759
760 /*
761 ** So, we need to output process!
762 */
763 return COOK_MEDIUM;
764}
765#endif
766
767static void
768RIOClearUp(PortP)
769struct Port *PortP;
770{
771 rio_dprintk (RIO_DEBUG_TTY, "RIOHalted set\n");
772 PortP->Config = 0; /* Direct semaphore */
773 PortP->PortState = 0;
774 PortP->firstOpen = 0;
775 PortP->FlushCmdBodge = 0;
776 PortP->ModemState = PortP->CookMode = 0;
777 PortP->Mapped = 0;
778 PortP->WflushFlag = 0;
779 PortP->MagicFlags = 0;
780 PortP->RxDataStart = 0;
781 PortP->TxBufferIn = 0;
782 PortP->TxBufferOut = 0;
783}
784
785/*
786** Put a command onto a port.
787** The PortPointer, command, length and arg are passed.
788** The len is the length *inclusive* of the command byte,
789** and so for a command that takes no data, len==1.
790** The arg is a single byte, and is only used if len==2.
791** Other values of len aren't allowed, and will cause
792** a panic.
793*/
794int RIOShortCommand(struct rio_info *p, struct Port *PortP,
795 int command, int len, int arg)
796{
797 PKT *PacketP;
798 int retries = 20; /* at 10 per second -> 2 seconds */
799 unsigned long flags;
800
801 rio_dprintk (RIO_DEBUG_TTY, "entering shortcommand.\n");
802#ifdef CHECK
803 CheckPortP( PortP );
804 if ( len < 1 || len > 2 )
805 cprintf(("STUPID LENGTH %d\n",len));
806#endif
807
808 if ( PortP->State & RIO_DELETED ) {
809 rio_dprintk (RIO_DEBUG_TTY, "Short command to deleted RTA ignored\n");
810 return RIO_FAIL;
811 }
812 rio_spin_lock_irqsave(&PortP->portSem, flags);
813
814 /*
815 ** If the port is in use for pre-emptive command, then wait for it to
816 ** be free again.
817 */
818 while ( (PortP->InUse != NOT_INUSE) && !p->RIOHalted ) {
819 rio_dprintk (RIO_DEBUG_TTY, "Waiting for not in use (%d)\n",
820 retries);
821 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
822 if (retries-- <= 0) {
823 return RIO_FAIL;
824 }
825 if (RIODelay_ni(PortP, HUNDRED_MS) == RIO_FAIL) {
826 return RIO_FAIL;
827 }
828 rio_spin_lock_irqsave(&PortP->portSem, flags);
829 }
830 if ( PortP->State & RIO_DELETED ) {
831 rio_dprintk (RIO_DEBUG_TTY, "Short command to deleted RTA ignored\n");
832 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
833 return RIO_FAIL;
834 }
835
836 while ( !can_add_transmit(&PacketP,PortP) && !p->RIOHalted ) {
837 rio_dprintk (RIO_DEBUG_TTY, "Waiting to add short command to queue (%d)\n", retries);
838 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
839 if (retries-- <= 0) {
840 rio_dprintk (RIO_DEBUG_TTY, "out of tries. Failing\n");
841 return RIO_FAIL;
842 }
843 if ( RIODelay_ni(PortP, HUNDRED_MS)==RIO_FAIL ) {
844 return RIO_FAIL;
845 }
846 rio_spin_lock_irqsave(&PortP->portSem, flags);
847 }
848
849 if ( p->RIOHalted ) {
850 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
851 return RIO_FAIL;
852 }
853
854 /*
855 ** set the command byte and the argument byte
856 */
857 WBYTE(PacketP->data[0] , command);
858
859 if ( len==2 )
860 WBYTE(PacketP->data[1] , arg);
861
862 /*
863 ** set the length of the packet and set the command bit.
864 */
865 WBYTE(PacketP->len , PKT_CMD_BIT | len);
866
867 add_transmit(PortP);
868 /*
869 ** Count characters transmitted for port statistics reporting
870 */
871 if (PortP->statsGather)
872 PortP->txchars += len;
873
874 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
875 return p->RIOHalted ? RIO_FAIL : ~RIO_FAIL;
876}
877
878
879#if 0
880/*
881** This is an ioctl interface. This is the twentieth century. You know what
882** its all about.
883*/
884int
885riotioctl(struct rio_info *p, struct tty_struct *tty, int cmd, caddr_t arg)
886{
887 register struct Port *PortP;
888 register struct ttystatics *tp;
889 int current;
890 int ParamSemIncremented = 0;
891 int old_oflag, old_cflag, old_iflag, changed, oldcook;
892 int i;
893 unsigned char sio_regs[5]; /* Here be magic */
894 short vpix_cflag;
895 short divisor;
896 int baud;
897 uint SysPort = rio_minor(tty);
898 int Modem = rio_ismodem(tty);
899 int ioctl_processed;
900
901 rio_dprintk (RIO_DEBUG_TTY, "port ioctl SysPort %d command 0x%x argument 0x%x %s\n",
902 SysPort, cmd, arg, Modem?"Modem":"tty") ;
903
904 if ( SysPort >= RIO_PORTS ) {
905 rio_dprintk (RIO_DEBUG_TTY, "Bad port number %d\n", SysPort);
906 return -ENXIO;
907 }
908
909 PortP = p->RIOPortp[SysPort];
910 tp = PortP->TtyP;
911
912 rio_spin_lock_irqsave(&PortP->portSem, flags);
913
914#ifdef STATS
915 PortP->Stat.IoctlCnt++;
916#endif
917
918 if ( PortP->State & RIO_DELETED ) {
919 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
920 return -EIO;
921 }
922
923
924 if ( p->RIOHalted ) {
925 RIOClearUp( PortP );
926 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
927 return -EIO;
928 }
929
930 /*
931 ** Count ioctls for port statistics reporting
932 */
933 if (PortP->statsGather)
934 PortP->ioctls++;
935
936 /*
937 ** Specialix RIO Ioctl calls
938 */
939 switch (cmd) {
940
941 case TCRIOTRIAD:
942 if ( arg )
943 PortP->State |= RIO_TRIAD_MODE;
944 else
945 PortP->State &= ~RIO_TRIAD_MODE;
946 /*
947 ** Normally, when istrip is set on a port, a config is
948 ** sent to the RTA instructing the CD1400 to do the
949 ** stripping. In TRIAD mode, the interrupt receive routine
950 ** must do the stripping instead, since it has to detect
951 ** an 8 bit function key sequence. If istrip is set with
952 ** TRIAD mode on(off), and 8 bit data is being read by
953 ** the port, the user then turns TRIAD mode off(on), the RTA
954 ** must be reconfigured (not) to do the stripping.
955 ** Hence we call RIOParam here.
956 */
957 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
958 RIOParam(PortP,CONFIG,Modem,OK_TO_SLEEP);
959 return 0;
960
961 case TCRIOTSTATE:
962 rio_dprintk (RIO_DEBUG_TTY, "tbusy/tstop monitoring %sabled\n",
963 arg ? "en" : "dis");
964 /* MonitorTstate = 0 ;*/
965 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
966 RIOParam(PortP, CONFIG, Modem, OK_TO_SLEEP);
967 return 0;
968
969 case TCRIOSTATE: /* current state of Modem input pins */
970 rio_dprintk (RIO_DEBUG_TTY, "TCRIOSTATE\n");
971 if (RIOPreemptiveCmd(p, PortP, MGET) == RIO_FAIL)
972 rio_dprintk (RIO_DEBUG_TTY, "TCRIOSTATE command failed\n");
973 PortP->State |= RIO_BUSY;
974 current = PortP->ModemState;
975 if ( copyout((caddr_t)&current, (int)arg,
976 sizeof(current))==COPYFAIL ) {
977 rio_dprintk (RIO_DEBUG_TTY, "Copyout failed\n");
978 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
979 pseterr(EFAULT);
980 }
981 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
982 return 0;
983
984 case TCRIOMBIS: /* Set modem lines */
985 case TCRIOMBIC: /* Clear modem lines */
986 rio_dprintk (RIO_DEBUG_TTY, "TCRIOMBIS/TCRIOMBIC\n");
987 if (cmd == TCRIOMBIS) {
988 uint state;
989 state = (uint)arg;
990 PortP->ModemState |= (ushort)state;
991 PortP->ModemLines = (ulong) arg;
992 if (RIOPreemptiveCmd(p, PortP, MBIS) == RIO_FAIL)
993 rio_dprintk (RIO_DEBUG_TTY,
994 "TCRIOMBIS command failed\n");
995 }
996 else {
997 uint state;
998
999 state = (uint)arg;
1000 PortP->ModemState &= ~(ushort)state;
1001 PortP->ModemLines = (ulong) arg;
1002 if (RIOPreemptiveCmd(p, PortP, MBIC) == RIO_FAIL)
1003 rio_dprintk (RIO_DEBUG_TTY, "TCRIOMBIC command failed\n");
1004 }
1005 PortP->State |= RIO_BUSY;
1006 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
1007 return 0;
1008
1009 case TCRIOXPON: /* set Xprint ON string */
1010 rio_dprintk (RIO_DEBUG_TTY, "TCRIOXPON\n");
1011 if ( copyin((int)arg, (caddr_t)PortP->Xprint.XpOn,
1012 MAX_XP_CTRL_LEN)==COPYFAIL ) {
1013 rio_dprintk (RIO_DEBUG_TTY, "Copyin failed\n");
1014 PortP->Xprint.XpOn[0] = '\0';
1015 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
1016 pseterr(EFAULT);
1017 }
1018 PortP->Xprint.XpOn[MAX_XP_CTRL_LEN-1] = '\0';
1019 PortP->Xprint.XpLen = strlen(PortP->Xprint.XpOn)+
1020 strlen(PortP->Xprint.XpOff);
1021 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
1022 return 0;
1023
1024 case TCRIOXPOFF: /* set Xprint OFF string */
1025 rio_dprintk (RIO_DEBUG_TTY, "TCRIOXPOFF\n");
1026 if ( copyin( (int)arg, (caddr_t)PortP->Xprint.XpOff,
1027 MAX_XP_CTRL_LEN)==COPYFAIL ) {
1028 rio_dprintk (RIO_DEBUG_TTY, "Copyin failed\n");
1029 PortP->Xprint.XpOff[0] = '\0';
1030 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
1031 pseterr(EFAULT);
1032 }
1033 PortP->Xprint.XpOff[MAX_XP_CTRL_LEN-1] = '\0';
1034 PortP->Xprint.XpLen = strlen(PortP->Xprint.XpOn)+
1035 strlen(PortP->Xprint.XpOff);
1036 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
1037 return 0;
1038
1039 case TCRIOXPCPS: /* set Xprint CPS string */
1040 rio_dprintk (RIO_DEBUG_TTY, "TCRIOXPCPS\n");
1041 if ( (uint)arg > p->RIOConf.MaxXpCps ||
1042 (uint)arg < p->RIOConf.MinXpCps ) {
1043 rio_dprintk (RIO_DEBUG_TTY, "%d CPS out of range\n",arg);
1044 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
1045 pseterr(EINVAL);
1046 return 0;
1047 }
1048 PortP->Xprint.XpCps = (uint)arg;
1049 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
1050 return 0;
1051
1052 case TCRIOXPRINT:
1053 rio_dprintk (RIO_DEBUG_TTY, "TCRIOXPRINT\n");
1054 if ( copyout((caddr_t)&PortP->Xprint, (int)arg,
1055 sizeof(struct Xprint))==COPYFAIL ) {
1056 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
1057 pseterr(EFAULT);
1058 }
1059 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
1060 return 0;
1061
1062 case TCRIOIXANYON:
1063 rio_dprintk (RIO_DEBUG_TTY, "TCRIOIXANYON\n");
1064 PortP->Config |= RIO_IXANY;
1065 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
1066 return 0;
1067
1068 case TCRIOIXANYOFF:
1069 rio_dprintk (RIO_DEBUG_TTY, "TCRIOIXANYOFF\n");
1070 PortP->Config &= ~RIO_IXANY;
1071 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
1072 return 0;
1073
1074 case TCRIOIXONON:
1075 rio_dprintk (RIO_DEBUG_TTY, "TCRIOIXONON\n");
1076 PortP->Config |= RIO_IXON;
1077 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
1078 return 0;
1079
1080 case TCRIOIXONOFF:
1081 rio_dprintk (RIO_DEBUG_TTY, "TCRIOIXONOFF\n");
1082 PortP->Config &= ~RIO_IXON;
1083 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
1084 return 0;
1085
1086/*
1087** 15.10.1998 ARG - ESIL 0761 part fix
1088** Added support for CTS and RTS flow control ioctls :
1089*/
1090 case TCRIOCTSFLOWEN:
1091 rio_dprintk (RIO_DEBUG_TTY, "TCRIOCTSFLOWEN\n");
1092 PortP->Config |= RIO_CTSFLOW;
1093 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
1094 RIOParam(PortP,CONFIG,Modem,OK_TO_SLEEP);
1095 return 0;
1096
1097 case TCRIOCTSFLOWDIS:
1098 rio_dprintk (RIO_DEBUG_TTY, "TCRIOCTSFLOWDIS\n");
1099 PortP->Config &= ~RIO_CTSFLOW;
1100 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
1101 RIOParam(PortP,CONFIG,Modem,OK_TO_SLEEP);
1102 return 0;
1103
1104 case TCRIORTSFLOWEN:
1105 rio_dprintk (RIO_DEBUG_TTY, "TCRIORTSFLOWEN\n");
1106 PortP->Config |= RIO_RTSFLOW;
1107 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
1108 RIOParam(PortP,CONFIG,Modem,OK_TO_SLEEP);
1109 return 0;
1110
1111 case TCRIORTSFLOWDIS:
1112 rio_dprintk (RIO_DEBUG_TTY, "TCRIORTSFLOWDIS\n");
1113 PortP->Config &= ~RIO_RTSFLOW;
1114 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
1115 RIOParam(PortP,CONFIG,Modem,OK_TO_SLEEP);
1116 return 0;
1117
1118/* end ESIL 0761 part fix */
1119
1120 }
1121
1122
1123 /* Lynx IOCTLS */
1124 switch (cmd) {
1125 case TIOCSETP:
1126 case TIOCSETN:
1127 case OTIOCSETP:
1128 case OTIOCSETN:
1129 ioctl_processed++;
1130 ttyseth(PortP, tp, (struct old_sgttyb *)arg);
1131 break;
1132 case TCSETA:
1133 case TCSETAW:
1134 case TCSETAF:
1135 ioctl_processed++;
1136 rio_dprintk (RIO_DEBUG_TTY, "NON POSIX ioctl\n");
1137 ttyseth_pv(PortP, tp, (struct termios *)arg, 0);
1138 break;
1139 case TCSETAP: /* posix tcsetattr() */
1140 case TCSETAWP: /* posix tcsetattr() */
1141 case TCSETAFP: /* posix tcsetattr() */
1142 rio_dprintk (RIO_DEBUG_TTY, "NON POSIX SYSV ioctl\n");
1143 ttyseth_pv(PortP, tp, (struct termios *)arg, 1);
1144 ioctl_processed++;
1145 break;
1146 }
1147
1148 /*
1149 ** If its any of the commands that require the port to be in the
1150 ** non-busy state wait until all output has drained
1151 */
1152 if (!ioctl_processed)
1153 switch(cmd) {
1154 case TCSETAW:
1155 case TCSETAF:
1156 case TCSETA:
1157 case TCSBRK:
1158#define OLD_POSIX ('x' << 8)
1159#define OLD_POSIX_SETA (OLD_POSIX | 2)
1160#define OLD_POSIX_SETAW (OLD_POSIX | 3)
1161#define OLD_POSIX_SETAF (OLD_POSIX | 4)
1162#define NEW_POSIX (('i' << 24) | ('X' << 16))
1163#define NEW_POSIX_SETA (NEW_POSIX | 2)
1164#define NEW_POSIX_SETAW (NEW_POSIX | 3)
1165#define NEW_POSIX_SETAF (NEW_POSIX | 4)
1166 case OLD_POSIX_SETA:
1167 case OLD_POSIX_SETAW:
1168 case OLD_POSIX_SETAF:
1169 case NEW_POSIX_SETA:
1170 case NEW_POSIX_SETAW:
1171 case NEW_POSIX_SETAF:
1172#ifdef TIOCSETP
1173 case TIOCSETP:
1174#endif
1175 case TIOCSETD:
1176 case TIOCSETN:
1177 rio_dprintk (RIO_DEBUG_TTY, "wait for non-BUSY, semaphore set\n");
1178 /*
1179 ** Wait for drain here, at least as far as the double buffer
1180 ** being empty.
1181 */
1182 /* XXX Does the above comment mean that this has
1183 still to be implemented? -- REW */
1184 /* XXX Is the locking OK together with locking
1185 in txenable? (Deadlock?) -- REW */
1186
1187 RIOTxEnable((char *)PortP);
1188 break;
1189 default:
1190 break;
1191 }
1192
1193 old_cflag = tp->tm.c_cflag;
1194 old_iflag = tp->tm.c_iflag;
1195 old_oflag = tp->tm.c_oflag;
1196 oldcook = PortP->CookMode;
1197
1198 if ( p->RIOHalted ) {
1199 RIOClearUp( PortP );
1200 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
1201 pseterr(EIO);
1202 return 0;
1203 }
1204
1205 PortP->FlushCmdBodge = 0;
1206
1207 /*
1208 ** If the port is locked, and it is reconfigured, we want
1209 ** to restore the state of the tty structure so the change is NOT
1210 ** made.
1211 */
1212 if (PortP->Lock) {
1213 tp->tm.c_iflag = PortP->StoredTty.iflag;
1214 tp->tm.c_oflag = PortP->StoredTty.oflag;
1215 tp->tm.c_cflag = PortP->StoredTty.cflag;
1216 tp->tm.c_lflag = PortP->StoredTty.lflag;
1217 tp->tm.c_line = PortP->StoredTty.line;
1218 for (i = 0; i < NCC + 1; i++)
1219 tp->tm.c_cc[i] = PortP->StoredTty.cc[i];
1220 }
1221 else {
1222 /*
1223 ** If the port is set to store the parameters, and it is
1224 ** reconfigured, we want to save the current tty struct so it
1225 ** may be restored on the next open.
1226 */
1227 if (PortP->Store) {
1228 PortP->StoredTty.iflag = tp->tm.c_iflag;
1229 PortP->StoredTty.oflag = tp->tm.c_oflag;
1230 PortP->StoredTty.cflag = tp->tm.c_cflag;
1231 PortP->StoredTty.lflag = tp->tm.c_lflag;
1232 PortP->StoredTty.line = tp->tm.c_line;
1233 for (i = 0; i < NCC + 1; i++)
1234 PortP->StoredTty.cc[i] = tp->tm.c_cc[i];
1235 }
1236 }
1237
1238 changed = (tp->tm.c_cflag != old_cflag) ||
1239 (tp->tm.c_iflag != old_iflag) ||
1240 (tp->tm.c_oflag != old_oflag);
1241
1242 PortP->CookMode = RIOCookMode(tp); /* Set new cooking mode */
1243
1244 rio_dprintk (RIO_DEBUG_TTY, "RIOIoctl changed %d newcook %d oldcook %d\n",
1245 changed,PortP->CookMode,oldcook);
1246
1247#ifdef MODEM_SUPPORT
1248 /*
1249 ** kludge to force CARR_ON if CLOCAL set
1250 */
1251 if ((tp->tm.c_cflag & CLOCAL) || (PortP->ModemState & MSVR1_CD)) {
1252 tp->tm.c_state |= CARR_ON;
1253 wakeup ((caddr_t)&tp->tm.c_canq);
1254 }
1255#endif
1256
1257 if ( p->RIOHalted ) {
1258 RIOClearUp( PortP );
1259 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
1260 pseterr(EIO);
1261 return 0;
1262 }
1263 /*
1264 ** Re-configure if modes or cooking have changed
1265 */
1266 if (changed || oldcook != PortP->CookMode || (ioctl_processed)) {
1267 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
1268 rio_dprintk (RIO_DEBUG_TTY, "Ioctl changing the PORT settings\n");
1269 RIOParam(PortP,CONFIG,Modem,OK_TO_SLEEP);
1270 rio_spin_lock_irqsave(&PortP->portSem, flags);
1271 }
1272
1273 if (p->RIOHalted) {
1274 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
1275 RIOClearUp( PortP );
1276 pseterr(EIO);
1277 return 0;
1278 }
1279 rio_spin_unlock_irqrestore(&PortP->portSem, flags);
1280 return 0;
1281}
1282
1283/*
1284 ttyseth -- set hardware dependent tty settings
1285*/
1286void
1287ttyseth(PortP, s, sg)
1288struct Port * PortP;
1289struct ttystatics * s;
1290struct old_sgttyb *sg;
1291{
1292 struct old_sgttyb * tsg;
1293 struct termios *tp = &s->tm;
1294
1295 tsg = &s->sg;
1296
1297 if (sg->sg_flags & (EVENP|ODDP)) {
1298 tp->c_cflag &= PARENB;
1299 if (sg->sg_flags & EVENP) {
1300 if (sg->sg_flags & ODDP) {
1301 tp->c_cflag &= V_CS7;
1302 tp->c_cflag &= ~PARENB;
1303 }
1304 else {
1305 tp->c_cflag &= V_CS7;
1306 tp->c_cflag &= PARENB;
1307 tp->c_cflag &= PARODD;
1308 }
1309 }
1310 else if (sg->sg_flags & ODDP) {
1311 tp->c_cflag &= V_CS7;
1312 tp->c_cflag &= PARENB;
1313 tp->c_cflag &= PARODD;
1314 }
1315 else {
1316 tp->c_cflag &= V_CS7;
1317 tp->c_cflag &= PARENB;
1318 }
1319 }
1320/*
1321 * Use ispeed as the desired speed. Most implementations don't handle
1322 * separate input and output speeds very well. If the RIO handles this,
1323 * I will have to use separate sets of flags to store them in the
1324 * Port structure.
1325 */
1326 if ( !sg->sg_ospeed )
1327 sg->sg_ospeed = sg->sg_ispeed;
1328 else
1329 sg->sg_ispeed = sg->sg_ospeed;
1330 if (sg->sg_ispeed > V_EXTB )
1331 sg->sg_ispeed = V_EXTB;
1332 if (sg->sg_ispeed < V_B0)
1333 sg->sg_ispeed = V_B0;
1334 *tsg = *sg;
1335 tp->c_cflag = (tp->c_cflag & ~V_CBAUD) | conv_bv[(int)sg->sg_ispeed];
1336}
1337
1338/*
1339 ttyseth_pv -- set hardware dependent tty settings using either the
1340 POSIX termios structure or the System V termio structure.
1341 sysv = 0 => (POSIX): struct termios *sg
1342 sysv != 0 => (System V): struct termio *sg
1343*/
1344static void
1345ttyseth_pv(PortP, s, sg, sysv)
1346struct Port *PortP;
1347struct ttystatics *s;
1348struct termios *sg;
1349int sysv;
1350{
1351 int speed;
1352 unsigned char csize;
1353 unsigned char cread;
1354 unsigned int lcr_flags;
1355 int ps;
1356
1357 if (sysv) {
1358 /* sg points to a System V termio structure */
1359 csize = ((struct termio *)sg)->c_cflag & CSIZE;
1360 cread = ((struct termio *)sg)->c_cflag & CREAD;
1361 speed = conv_vb[((struct termio *)sg)->c_cflag & V_CBAUD];
1362 }
1363 else {
1364 /* sg points to a POSIX termios structure */
1365 csize = sg->c_cflag & CSIZE;
1366 cread = sg->c_cflag & CREAD;
1367 speed = conv_vb[sg->c_cflag & V_CBAUD];
1368 }
1369 if (s->sg.sg_ispeed != speed || s->sg.sg_ospeed != speed) {
1370 s->sg.sg_ispeed = speed;
1371 s->sg.sg_ospeed = speed;
1372 s->tm.c_cflag = (s->tm.c_cflag & ~V_CBAUD) |
1373 conv_bv[(int)s->sg.sg_ispeed];
1374 }
1375}
1376#endif