blob: 80c2e7e9622f63507c16b4ec2682709936423f45 [file] [log] [blame]
Felipe Balbi30867752008-08-18 17:39:30 -07001/*
2 * f_obex.c -- USB CDC OBEX function driver
3 *
4 * Copyright (C) 2008 Nokia Corporation
5 * Contact: Felipe Balbi <felipe.balbi@nokia.com>
6 *
7 * Based on f_acm.c by Al Borchers and David Brownell.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 */
23
24/* #define VERBOSE_DEBUG */
25
26#include <linux/kernel.h>
27#include <linux/utsname.h>
28#include <linux/device.h>
29
30#include "u_serial.h"
31#include "gadget_chips.h"
32
33
34/*
35 * This CDC OBEX function support just packages a TTY-ish byte stream.
36 * A user mode server will put it into "raw" mode and handle all the
37 * relevant protocol details ... this is just a kernel passthrough.
David Brownell21214272008-08-18 17:45:25 -070038 * When possible, we prevent gadget enumeration until that server is
39 * ready to handle the commands.
Felipe Balbi30867752008-08-18 17:39:30 -070040 */
41
42struct obex_ep_descs {
43 struct usb_endpoint_descriptor *obex_in;
44 struct usb_endpoint_descriptor *obex_out;
45};
46
47struct f_obex {
48 struct gserial port;
49 u8 ctrl_id;
50 u8 data_id;
51 u8 port_num;
David Brownell21214272008-08-18 17:45:25 -070052 u8 can_activate;
Felipe Balbi30867752008-08-18 17:39:30 -070053
54 struct obex_ep_descs fs;
55 struct obex_ep_descs hs;
56};
57
58static inline struct f_obex *func_to_obex(struct usb_function *f)
59{
60 return container_of(f, struct f_obex, port.func);
61}
62
David Brownell21214272008-08-18 17:45:25 -070063static inline struct f_obex *port_to_obex(struct gserial *p)
64{
65 return container_of(p, struct f_obex, port);
66}
67
Felipe Balbi30867752008-08-18 17:39:30 -070068/*-------------------------------------------------------------------------*/
69
70#define OBEX_CTRL_IDX 0
71#define OBEX_DATA_IDX 1
72
73static struct usb_string obex_string_defs[] = {
74 [OBEX_CTRL_IDX].s = "CDC Object Exchange (OBEX)",
75 [OBEX_DATA_IDX].s = "CDC OBEX Data",
76 { }, /* end of list */
77};
78
79static struct usb_gadget_strings obex_string_table = {
80 .language = 0x0409, /* en-US */
81 .strings = obex_string_defs,
82};
83
84static struct usb_gadget_strings *obex_strings[] = {
85 &obex_string_table,
86 NULL,
87};
88
89/*-------------------------------------------------------------------------*/
90
91static struct usb_interface_descriptor obex_control_intf __initdata = {
92 .bLength = sizeof(obex_control_intf),
93 .bDescriptorType = USB_DT_INTERFACE,
94 .bInterfaceNumber = 0,
95
96 .bAlternateSetting = 0,
97 .bNumEndpoints = 0,
98 .bInterfaceClass = USB_CLASS_COMM,
99 .bInterfaceSubClass = USB_CDC_SUBCLASS_OBEX,
100};
101
102static struct usb_interface_descriptor obex_data_nop_intf __initdata = {
103 .bLength = sizeof(obex_data_nop_intf),
104 .bDescriptorType = USB_DT_INTERFACE,
105 .bInterfaceNumber = 1,
106
107 .bAlternateSetting = 0,
108 .bNumEndpoints = 0,
109 .bInterfaceClass = USB_CLASS_CDC_DATA,
110};
111
112static struct usb_interface_descriptor obex_data_intf __initdata = {
113 .bLength = sizeof(obex_data_intf),
114 .bDescriptorType = USB_DT_INTERFACE,
115 .bInterfaceNumber = 2,
116
117 .bAlternateSetting = 1,
118 .bNumEndpoints = 2,
119 .bInterfaceClass = USB_CLASS_CDC_DATA,
120};
121
122static struct usb_cdc_header_desc obex_cdc_header_desc __initdata = {
123 .bLength = sizeof(obex_cdc_header_desc),
124 .bDescriptorType = USB_DT_CS_INTERFACE,
125 .bDescriptorSubType = USB_CDC_HEADER_TYPE,
126 .bcdCDC = __constant_cpu_to_le16(0x0120),
127};
128
129static struct usb_cdc_union_desc obex_cdc_union_desc __initdata = {
130 .bLength = sizeof(obex_cdc_union_desc),
131 .bDescriptorType = USB_DT_CS_INTERFACE,
132 .bDescriptorSubType = USB_CDC_UNION_TYPE,
133 .bMasterInterface0 = 1,
134 .bSlaveInterface0 = 2,
135};
136
137static struct usb_cdc_obex_desc obex_desc __initdata = {
138 .bLength = sizeof(obex_desc),
139 .bDescriptorType = USB_DT_CS_INTERFACE,
140 .bDescriptorSubType = USB_CDC_OBEX_TYPE,
141 .bcdVersion = __constant_cpu_to_le16(0x0100),
142};
143
144/* High-Speed Support */
145
146static struct usb_endpoint_descriptor obex_hs_ep_out_desc __initdata = {
147 .bLength = USB_DT_ENDPOINT_SIZE,
148 .bDescriptorType = USB_DT_ENDPOINT,
149
150 .bEndpointAddress = USB_DIR_OUT,
151 .bmAttributes = USB_ENDPOINT_XFER_BULK,
152 .wMaxPacketSize = __constant_cpu_to_le16(512),
153};
154
155static struct usb_endpoint_descriptor obex_hs_ep_in_desc __initdata = {
156 .bLength = USB_DT_ENDPOINT_SIZE,
157 .bDescriptorType = USB_DT_ENDPOINT,
158
159 .bEndpointAddress = USB_DIR_IN,
160 .bmAttributes = USB_ENDPOINT_XFER_BULK,
161 .wMaxPacketSize = __constant_cpu_to_le16(512),
162};
163
164static struct usb_descriptor_header *hs_function[] __initdata = {
165 (struct usb_descriptor_header *) &obex_control_intf,
166 (struct usb_descriptor_header *) &obex_cdc_header_desc,
167 (struct usb_descriptor_header *) &obex_desc,
168 (struct usb_descriptor_header *) &obex_cdc_union_desc,
169
170 (struct usb_descriptor_header *) &obex_data_nop_intf,
171 (struct usb_descriptor_header *) &obex_data_intf,
172 (struct usb_descriptor_header *) &obex_hs_ep_in_desc,
173 (struct usb_descriptor_header *) &obex_hs_ep_out_desc,
174 NULL,
175};
176
177/* Full-Speed Support */
178
179static struct usb_endpoint_descriptor obex_fs_ep_in_desc __initdata = {
180 .bLength = USB_DT_ENDPOINT_SIZE,
181 .bDescriptorType = USB_DT_ENDPOINT,
182
183 .bEndpointAddress = USB_DIR_IN,
184 .bmAttributes = USB_ENDPOINT_XFER_BULK,
185};
186
187static struct usb_endpoint_descriptor obex_fs_ep_out_desc __initdata = {
188 .bLength = USB_DT_ENDPOINT_SIZE,
189 .bDescriptorType = USB_DT_ENDPOINT,
190
191 .bEndpointAddress = USB_DIR_OUT,
192 .bmAttributes = USB_ENDPOINT_XFER_BULK,
193};
194
195static struct usb_descriptor_header *fs_function[] __initdata = {
196 (struct usb_descriptor_header *) &obex_control_intf,
197 (struct usb_descriptor_header *) &obex_cdc_header_desc,
198 (struct usb_descriptor_header *) &obex_desc,
199 (struct usb_descriptor_header *) &obex_cdc_union_desc,
200
201 (struct usb_descriptor_header *) &obex_data_nop_intf,
202 (struct usb_descriptor_header *) &obex_data_intf,
203 (struct usb_descriptor_header *) &obex_fs_ep_in_desc,
204 (struct usb_descriptor_header *) &obex_fs_ep_out_desc,
205 NULL,
206};
207
208/*-------------------------------------------------------------------------*/
209
210static int obex_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
211{
212 struct f_obex *obex = func_to_obex(f);
213 struct usb_composite_dev *cdev = f->config->cdev;
214
215 if (intf == obex->ctrl_id) {
216 if (alt != 0)
217 goto fail;
218 /* NOP */
219 DBG(cdev, "reset obex ttyGS%d control\n", obex->port_num);
220
221 } else if (intf == obex->data_id) {
222 if (alt > 1)
223 goto fail;
224
225 if (obex->port.in->driver_data) {
226 DBG(cdev, "reset obex ttyGS%d\n", obex->port_num);
227 gserial_disconnect(&obex->port);
228 }
229
230 if (!obex->port.in_desc) {
231 DBG(cdev, "init obex ttyGS%d\n", obex->port_num);
232 obex->port.in_desc = ep_choose(cdev->gadget,
233 obex->hs.obex_in, obex->fs.obex_in);
234 obex->port.out_desc = ep_choose(cdev->gadget,
235 obex->hs.obex_out, obex->fs.obex_out);
236 }
237
238 if (alt == 1) {
239 DBG(cdev, "activate obex ttyGS%d\n", obex->port_num);
240 gserial_connect(&obex->port, obex->port_num);
241 }
242
243 } else
244 goto fail;
245
246 return 0;
247
248fail:
249 return -EINVAL;
250}
251
252static int obex_get_alt(struct usb_function *f, unsigned intf)
253{
254 struct f_obex *obex = func_to_obex(f);
255
256 if (intf == obex->ctrl_id)
257 return 0;
258
259 return obex->port.in->driver_data ? 1 : 0;
260}
261
262static void obex_disable(struct usb_function *f)
263{
264 struct f_obex *obex = func_to_obex(f);
265 struct usb_composite_dev *cdev = f->config->cdev;
266
267 DBG(cdev, "obex ttyGS%d disable\n", obex->port_num);
268 gserial_disconnect(&obex->port);
269}
270
271/*-------------------------------------------------------------------------*/
272
David Brownell21214272008-08-18 17:45:25 -0700273static void obex_connect(struct gserial *g)
274{
275 struct f_obex *obex = port_to_obex(g);
276 struct usb_composite_dev *cdev = g->func.config->cdev;
277 int status;
278
279 if (!obex->can_activate)
280 return;
281
282 status = usb_function_activate(&g->func);
283 if (status)
284 DBG(cdev, "obex ttyGS%d function activate --> %d\n",
285 obex->port_num, status);
286}
287
288static void obex_disconnect(struct gserial *g)
289{
290 struct f_obex *obex = port_to_obex(g);
291 struct usb_composite_dev *cdev = g->func.config->cdev;
292 int status;
293
294 if (!obex->can_activate)
295 return;
296
297 status = usb_function_deactivate(&g->func);
298 if (status)
299 DBG(cdev, "obex ttyGS%d function deactivate --> %d\n",
300 obex->port_num, status);
301}
302
303/*-------------------------------------------------------------------------*/
304
Felipe Balbi30867752008-08-18 17:39:30 -0700305static int __init
306obex_bind(struct usb_configuration *c, struct usb_function *f)
307{
308 struct usb_composite_dev *cdev = c->cdev;
309 struct f_obex *obex = func_to_obex(f);
310 int status;
311 struct usb_ep *ep;
312
313 /* allocate instance-specific interface IDs, and patch descriptors */
314
315 status = usb_interface_id(c, f);
316 if (status < 0)
317 goto fail;
318 obex->ctrl_id = status;
319
320 obex_control_intf.bInterfaceNumber = status;
321 obex_cdc_union_desc.bMasterInterface0 = status;
322
323 status = usb_interface_id(c, f);
324 if (status < 0)
325 goto fail;
326 obex->data_id = status;
327
328 obex_data_nop_intf.bInterfaceNumber = status;
329 obex_data_intf.bInterfaceNumber = status;
330 obex_cdc_union_desc.bSlaveInterface0 = status;
331
332 /* allocate instance-specific endpoints */
333
334 ep = usb_ep_autoconfig(cdev->gadget, &obex_fs_ep_in_desc);
335 if (!ep)
336 goto fail;
337 obex->port.in = ep;
338 ep->driver_data = cdev; /* claim */
339
340 ep = usb_ep_autoconfig(cdev->gadget, &obex_fs_ep_out_desc);
341 if (!ep)
342 goto fail;
343 obex->port.out = ep;
344 ep->driver_data = cdev; /* claim */
345
346 /* copy descriptors, and track endpoint copies */
347 f->descriptors = usb_copy_descriptors(fs_function);
348
349 obex->fs.obex_in = usb_find_endpoint(fs_function,
350 f->descriptors, &obex_fs_ep_in_desc);
351 obex->fs.obex_out = usb_find_endpoint(fs_function,
352 f->descriptors, &obex_fs_ep_out_desc);
353
354 /* support all relevant hardware speeds... we expect that when
355 * hardware is dual speed, all bulk-capable endpoints work at
356 * both speeds
357 */
358 if (gadget_is_dualspeed(c->cdev->gadget)) {
359
360 obex_hs_ep_in_desc.bEndpointAddress =
361 obex_fs_ep_in_desc.bEndpointAddress;
362 obex_hs_ep_out_desc.bEndpointAddress =
363 obex_fs_ep_out_desc.bEndpointAddress;
364
365 /* copy descriptors, and track endpoint copies */
366 f->hs_descriptors = usb_copy_descriptors(hs_function);
367
368 obex->hs.obex_in = usb_find_endpoint(hs_function,
369 f->descriptors, &obex_hs_ep_in_desc);
370 obex->hs.obex_out = usb_find_endpoint(hs_function,
371 f->descriptors, &obex_hs_ep_out_desc);
372 }
373
David Brownell21214272008-08-18 17:45:25 -0700374 /* Avoid letting this gadget enumerate until the userspace
375 * OBEX server is active.
376 */
377 status = usb_function_deactivate(f);
378 if (status < 0)
379 WARNING(cdev, "obex ttyGS%d: can't prevent enumeration, %d\n",
380 obex->port_num, status);
381 else
382 obex->can_activate = true;
383
384
Felipe Balbi30867752008-08-18 17:39:30 -0700385 DBG(cdev, "obex ttyGS%d: %s speed IN/%s OUT/%s\n",
386 obex->port_num,
387 gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
388 obex->port.in->name, obex->port.out->name);
389
390 return 0;
391
392fail:
393 /* we might as well release our claims on endpoints */
394 if (obex->port.out)
395 obex->port.out->driver_data = NULL;
396 if (obex->port.in)
397 obex->port.in->driver_data = NULL;
398
399 ERROR(cdev, "%s/%p: can't bind, err %d\n", f->name, f, status);
400
401 return status;
402}
403
404static void
405obex_unbind(struct usb_configuration *c, struct usb_function *f)
406{
407 if (gadget_is_dualspeed(c->cdev->gadget))
408 usb_free_descriptors(f->hs_descriptors);
409 usb_free_descriptors(f->descriptors);
410 kfree(func_to_obex(f));
411}
412
413/* Some controllers can't support CDC OBEX ... */
414static inline bool can_support_obex(struct usb_configuration *c)
415{
416 /* Since the first interface is a NOP, we can ignore the
417 * issue of multi-interface support on most controllers.
418 *
419 * Altsettings are mandatory, however...
420 */
421 if (!gadget_supports_altsettings(c->cdev->gadget))
422 return false;
423
424 /* everything else is *probably* fine ... */
425 return true;
426}
427
428/**
429 * obex_bind_config - add a CDC OBEX function to a configuration
430 * @c: the configuration to support the CDC OBEX instance
431 * @port_num: /dev/ttyGS* port this interface will use
432 * Context: single threaded during gadget setup
433 *
434 * Returns zero on success, else negative errno.
435 *
436 * Caller must have called @gserial_setup() with enough ports to
437 * handle all the ones it binds. Caller is also responsible
438 * for calling @gserial_cleanup() before module unload.
439 */
440int __init obex_bind_config(struct usb_configuration *c, u8 port_num)
441{
442 struct f_obex *obex;
443 int status;
444
445 if (!can_support_obex(c))
446 return -EINVAL;
447
448 /* maybe allocate device-global string IDs, and patch descriptors */
449 if (obex_string_defs[OBEX_CTRL_IDX].id == 0) {
450 status = usb_string_id(c->cdev);
451 if (status < 0)
452 return status;
453 obex_string_defs[OBEX_CTRL_IDX].id = status;
454
455 obex_control_intf.iInterface = status;
456
457 status = usb_string_id(c->cdev);
458 if (status < 0)
459 return status;
460 obex_string_defs[OBEX_DATA_IDX].id = status;
461
462 obex_data_nop_intf.iInterface =
463 obex_data_intf.iInterface = status;
464 }
465
466 /* allocate and initialize one new instance */
467 obex = kzalloc(sizeof *obex, GFP_KERNEL);
468 if (!obex)
469 return -ENOMEM;
470
471 obex->port_num = port_num;
472
David Brownell21214272008-08-18 17:45:25 -0700473 obex->port.connect = obex_connect;
474 obex->port.disconnect = obex_disconnect;
475
Felipe Balbi30867752008-08-18 17:39:30 -0700476 obex->port.func.name = "obex";
477 obex->port.func.strings = obex_strings;
478 /* descriptors are per-instance copies */
479 obex->port.func.bind = obex_bind;
480 obex->port.func.unbind = obex_unbind;
481 obex->port.func.set_alt = obex_set_alt;
482 obex->port.func.get_alt = obex_get_alt;
483 obex->port.func.disable = obex_disable;
484
485 status = usb_add_function(c, &obex->port.func);
486 if (status)
487 kfree(obex);
488
489 return status;
490}
491
492MODULE_AUTHOR("Felipe Balbi");
493MODULE_LICENSE("GPL");