arch/powerpc/platforms/pseries/setup.c

/*
 *  64-bit pSeries and RS/6000 setup code.
 *
 *  Copyright (C) 1995  Linus Torvalds
 *  Adapted from 'alpha' version by Gary Thomas
 *  Modified by Cort Dougan (cort@cs.nmt.edu)
 *  Modified by PPC64 Team, IBM Corp
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version
 * 2 of the License, or (at your option) any later version.
 */

/*
 * bootup setup stuff..
 */

#undef DEBUG

#include <linux/config.h>
#include <linux/cpu.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/user.h>
#include <linux/a.out.h>
#include <linux/tty.h>
#include <linux/major.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/console.h>
#include <linux/pci.h>
#include <linux/utsname.h>
#include <linux/adb.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>

#include <asm/mmu.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <asm/pci-bridge.h>
#include <asm/iommu.h>
#include <asm/dma.h>
#include <asm/machdep.h>
#include <asm/irq.h>
#include <asm/kexec.h>
#include <asm/time.h>
#include <asm/nvram.h>
#include "xics.h"
#include <asm/pmc.h>
#include <asm/mpic.h>
#include <asm/ppc-pci.h>
#include <asm/i8259.h>
#include <asm/udbg.h>
#include <asm/smp.h>

#include "plpar_wrappers.h"
#include "ras.h"
#include "firmware.h"

#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif

extern void find_udbg_vterm(void);

int fwnmi_active;  /* TRUE if an FWNMI handler is present */

static void pseries_shared_idle_sleep(void);
static void pseries_dedicated_idle_sleep(void);

struct mpic *pSeries_mpic;

static void pSeries_show_cpuinfo(struct seq_file *m)
{
	struct device_node *root;
	const char *model = "";

	root = of_find_node_by_path("/");
	if (root)
		model = get_property(root, "model", NULL);
	seq_printf(m, "machine\t\t: CHRP %s\n", model);
	of_node_put(root);
}

/* Initialize firmware assisted non-maskable interrupts if
 * the firmware supports this feature.
 */
static void __init fwnmi_init(void)
{
	unsigned long system_reset_addr, machine_check_addr;

	int ibm_nmi_register = rtas_token("ibm,nmi-register");
	if (ibm_nmi_register == RTAS_UNKNOWN_SERVICE)
		return;

	/* If the kernel's not linked at zero we point the firmware at low
	 * addresses anyway, and use a trampoline to get to the real code. */
	system_reset_addr  = __pa(system_reset_fwnmi) - PHYSICAL_START;
	machine_check_addr = __pa(machine_check_fwnmi) - PHYSICAL_START;

	if (0 == rtas_call(ibm_nmi_register, 2, 1, NULL, system_reset_addr,
				machine_check_addr))
		fwnmi_active = 1;
}

static void __init pSeries_init_mpic(void)
{
        unsigned int *addrp;
	struct device_node *np;
	unsigned long intack = 0;

	/* All ISUs are setup, complete initialization */
	mpic_init(pSeries_mpic);

	/* Check what kind of cascade ACK we have */
        if (!(np = of_find_node_by_name(NULL, "pci"))
            || !(addrp = (unsigned int *)
                 get_property(np, "8259-interrupt-acknowledge", NULL)))
                printk(KERN_ERR "Cannot find pci to get ack address\n");
        else
		intack = addrp[prom_n_addr_cells(np)-1];
	of_node_put(np);

	/* Setup the legacy interrupts & controller */
	i8259_init(intack, 0);

	/* Hook cascade to mpic */
	mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL);
}

static void __init pSeries_setup_mpic(void)
{
	unsigned int *opprop;
	unsigned long openpic_addr = 0;
        unsigned char senses[NR_IRQS - NUM_ISA_INTERRUPTS];
        struct device_node *root;
	int irq_count;

	/* Find the Open PIC if present */
	root = of_find_node_by_path("/");
	opprop = (unsigned int *) get_property(root, "platform-open-pic", NULL);
	if (opprop != 0) {
		int n = prom_n_addr_cells(root);

		for (openpic_addr = 0; n > 0; --n)
			openpic_addr = (openpic_addr << 32) + *opprop++;
		printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
	}
	of_node_put(root);

	BUG_ON(openpic_addr == 0);

	/* Get the sense values from OF */
	prom_get_irq_senses(senses, NUM_ISA_INTERRUPTS, NR_IRQS);
	
	/* Setup the openpic driver */
	irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */
	pSeries_mpic = mpic_alloc(openpic_addr, MPIC_PRIMARY,
				  16, 16, irq_count, /* isu size, irq offset, irq count */ 
				  NR_IRQS - 4, /* ipi offset */
				  senses, irq_count, /* sense & sense size */
				  " MPIC     ");
}

static void pseries_lpar_enable_pmcs(void)
{
	unsigned long set, reset;

	power4_enable_pmcs();

	set = 1UL << 63;
	reset = 0;
	plpar_hcall_norets(H_PERFMON, set, reset);

	/* instruct hypervisor to maintain PMCs */
	if (firmware_has_feature(FW_FEATURE_SPLPAR))
		get_lppaca()->pmcregs_in_use = 1;
}

static void __init pSeries_setup_arch(void)
{
	/* Fixup ppc_md depending on the type of interrupt controller */
	if (ppc64_interrupt_controller == IC_OPEN_PIC) {
		ppc_md.init_IRQ       = pSeries_init_mpic;
		ppc_md.get_irq        = mpic_get_irq;
		/* Allocate the mpic now, so that find_and_init_phbs() can
		 * fill the ISUs */
		pSeries_setup_mpic();
	} else {
		ppc_md.init_IRQ       = xics_init_IRQ;
		ppc_md.get_irq        = xics_get_irq;
	}

#ifdef CONFIG_SMP
	smp_init_pSeries();
#endif
	/* openpic global configuration register (64-bit format). */
	/* openpic Interrupt Source Unit pointer (64-bit format). */
	/* python0 facility area (mmio) (64-bit format) REAL address. */

	/* init to some ~sane value until calibrate_delay() runs */
	loops_per_jiffy = 50000000;

	if (ROOT_DEV == 0) {
		printk("No ramdisk, default root is /dev/sda2\n");
		ROOT_DEV = Root_SDA2;
	}

	fwnmi_init();

	/* Find and initialize PCI host bridges */
	init_pci_config_tokens();
	find_and_init_phbs();
	eeh_init();

	pSeries_nvram_init();

	/* Choose an idle loop */
	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
		vpa_init(boot_cpuid);
		if (get_lppaca()->shared_proc) {
			printk(KERN_INFO "Using shared processor idle loop\n");
			ppc_md.power_save = pseries_shared_idle_sleep;
		} else {
			printk(KERN_INFO "Using dedicated idle loop\n");
			ppc_md.power_save = pseries_dedicated_idle_sleep;
		}
	} else {
		printk(KERN_INFO "Using default idle loop\n");
	}

	if (firmware_has_feature(FW_FEATURE_LPAR))
		ppc_md.enable_pmcs = pseries_lpar_enable_pmcs;
	else
		ppc_md.enable_pmcs = power4_enable_pmcs;
}

static int __init pSeries_init_panel(void)
{
	/* Manually leave the kernel version on the panel. */
	ppc_md.progress("Linux ppc64\n", 0);
	ppc_md.progress(system_utsname.version, 0);

	return 0;
}
arch_initcall(pSeries_init_panel);

static  void __init pSeries_discover_pic(void)
{
	struct device_node *np;
	char *typep;

	/*
	 * Setup interrupt mapping options that are needed for finish_device_tree
	 * to properly parse the OF interrupt tree & do the virtual irq mapping
	 */
	__irq_offset_value = NUM_ISA_INTERRUPTS;
	ppc64_interrupt_controller = IC_INVALID;
	for (np = NULL; (np = of_find_node_by_name(np, "interrupt-controller"));) {
		typep = (char *)get_property(np, "compatible", NULL);
		if (strstr(typep, "open-pic")) {
			ppc64_interrupt_controller = IC_OPEN_PIC;
			break;
		} else if (strstr(typep, "ppc-xicp")) {
			ppc64_interrupt_controller = IC_PPC_XIC;
			break;
		}
	}
	if (ppc64_interrupt_controller == IC_INVALID)
		printk("pSeries_discover_pic: failed to recognize"
			" interrupt-controller\n");

}

static void pSeries_mach_cpu_die(void)
{
	local_irq_disable();
	idle_task_exit();
	/* Some hardware requires clearing the CPPR, while other hardware does not
	 * it is safe either way
	 */
	pSeriesLP_cppr_info(0, 0);
	rtas_stop_self();
	/* Should never get here... */
	BUG();
	for(;;);
}

static int pseries_set_dabr(unsigned long dabr)
{
	return plpar_hcall_norets(H_SET_DABR, dabr);
}

static int pseries_set_xdabr(unsigned long dabr)
{
	/* We want to catch accesses from kernel and userspace */
	return plpar_hcall_norets(H_SET_XDABR, dabr,
			H_DABRX_KERNEL | H_DABRX_USER);
}

/*
 * Early initialization.  Relocation is on but do not reference unbolted pages
 */
static void __init pSeries_init_early(void)
{
	DBG(" -> pSeries_init_early()\n");

	fw_feature_init();
	
	if (firmware_has_feature(FW_FEATURE_LPAR))
		hpte_init_lpar();
	else
		hpte_init_native();

	if (firmware_has_feature(FW_FEATURE_LPAR))
		find_udbg_vterm();

	if (firmware_has_feature(FW_FEATURE_DABR))
		ppc_md.set_dabr = pseries_set_dabr;
	else if (firmware_has_feature(FW_FEATURE_XDABR))
		ppc_md.set_dabr = pseries_set_xdabr;

	iommu_init_early_pSeries();

	pSeries_discover_pic();

	DBG(" <- pSeries_init_early()\n");
}


static int pSeries_check_legacy_ioport(unsigned int baseport)
{
	struct device_node *np;

#define I8042_DATA_REG	0x60
#define FDC_BASE	0x3f0


	switch(baseport) {
	case I8042_DATA_REG:
		np = of_find_node_by_type(NULL, "8042");
		if (np == NULL)
			return -ENODEV;
		of_node_put(np);
		break;
	case FDC_BASE:
		np = of_find_node_by_type(NULL, "fdc");
		if (np == NULL)
			return -ENODEV;
		of_node_put(np);
		break;
	}
	return 0;
}

/*
 * Called very early, MMU is off, device-tree isn't unflattened
 */

static int __init pSeries_probe_hypertas(unsigned long node,
					 const char *uname, int depth,
					 void *data)
{
	if (depth != 1 ||
	    (strcmp(uname, "rtas") != 0 && strcmp(uname, "rtas@0") != 0))
 		return 0;

	if (of_get_flat_dt_prop(node, "ibm,hypertas-functions", NULL) != NULL)
 		powerpc_firmware_features |= FW_FEATURE_LPAR;

 	return 1;
}

static int __init pSeries_probe(void)
{
 	char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(),
 					  "device_type", NULL);
 	if (dtype == NULL)
 		return 0;
 	if (strcmp(dtype, "chrp"))
		return 0;

	DBG("pSeries detected, looking for LPAR capability...\n");

	/* Now try to figure out if we are running on LPAR */
	of_scan_flat_dt(pSeries_probe_hypertas, NULL);

	DBG("Machine is%s LPAR !\n",
	    (powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not");

	return 1;
}


DECLARE_PER_CPU(unsigned long, smt_snooze_delay);

static void pseries_dedicated_idle_sleep(void)
{ 
	unsigned int cpu = smp_processor_id();
	unsigned long start_snooze;
	unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay);

	/*
	 * Indicate to the HV that we are idle. Now would be
	 * a good time to find other work to dispatch.
	 */
	get_lppaca()->idle = 1;

	/*
	 * We come in with interrupts disabled, and need_resched()
	 * has been checked recently.  If we should poll for a little
	 * while, do so.
	 */
	if (*smt_snooze_delay) {
		start_snooze = get_tb() +
			*smt_snooze_delay * tb_ticks_per_usec;
		local_irq_enable();
		set_thread_flag(TIF_POLLING_NRFLAG);

		while (get_tb() < start_snooze) {
			if (need_resched() || cpu_is_offline(cpu))
				goto out;
			ppc64_runlatch_off();
			HMT_low();
			HMT_very_low();
		}

		HMT_medium();
		clear_thread_flag(TIF_POLLING_NRFLAG);
		smp_mb();
		local_irq_disable();
		if (need_resched() || cpu_is_offline(cpu))
			goto out;
	}

	/*
	 * Cede if the other thread is not idle, so that it can
	 * go single-threaded.  If the other thread is idle,
	 * we ask the hypervisor if it has pending work it
	 * wants to do and cede if it does.  Otherwise we keep
	 * polling in order to reduce interrupt latency.
	 *
	 * Doing the cede when the other thread is active will
	 * result in this thread going dormant, meaning the other
	 * thread gets to run in single-threaded (ST) mode, which
	 * is slightly faster than SMT mode with this thread at
	 * very low priority.  The cede enables interrupts, which
	 * doesn't matter here.
	 */
	if (!lppaca[cpu ^ 1].idle || poll_pending() == H_Pending)
		cede_processor();

out:
	HMT_medium();
	get_lppaca()->idle = 0;
}

static void pseries_shared_idle_sleep(void)
{
	/*
	 * Indicate to the HV that we are idle. Now would be
	 * a good time to find other work to dispatch.
	 */
	get_lppaca()->idle = 1;

	/*
	 * Yield the processor to the hypervisor.  We return if
	 * an external interrupt occurs (which are driven prior
	 * to returning here) or if a prod occurs from another
	 * processor. When returning here, external interrupts
	 * are enabled.
	 */
	cede_processor();

	get_lppaca()->idle = 0;
}

static int pSeries_pci_probe_mode(struct pci_bus *bus)
{
	if (firmware_has_feature(FW_FEATURE_LPAR))
		return PCI_PROBE_DEVTREE;
	return PCI_PROBE_NORMAL;
}

#ifdef CONFIG_KEXEC
static void pseries_kexec_cpu_down(int crash_shutdown, int secondary)
{
	/* Don't risk a hypervisor call if we're crashing */
	if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) {
		unsigned long vpa = __pa(get_lppaca());

		if (unregister_vpa(hard_smp_processor_id(), vpa)) {
			printk("VPA deregistration of cpu %u (hw_cpu_id %d) "
					"failed\n", smp_processor_id(),
					hard_smp_processor_id());
		}
	}

	if (ppc64_interrupt_controller == IC_OPEN_PIC)
		mpic_teardown_this_cpu(secondary);
	else
		xics_teardown_cpu(secondary);
}
#endif

define_machine(pseries) {
	.name			= "pSeries",
	.probe			= pSeries_probe,
	.setup_arch		= pSeries_setup_arch,
	.init_early		= pSeries_init_early,
	.show_cpuinfo		= pSeries_show_cpuinfo,
	.log_error		= pSeries_log_error,
	.pcibios_fixup		= pSeries_final_fixup,
	.pci_probe_mode		= pSeries_pci_probe_mode,
	.irq_bus_setup		= pSeries_irq_bus_setup,
	.restart		= rtas_restart,
	.power_off		= rtas_power_off,
	.halt			= rtas_halt,
	.panic			= rtas_os_term,
	.cpu_die		= pSeries_mach_cpu_die,
	.get_boot_time		= rtas_get_boot_time,
	.get_rtc_time		= rtas_get_rtc_time,
	.set_rtc_time		= rtas_set_rtc_time,
	.calibrate_decr		= generic_calibrate_decr,
	.progress		= rtas_progress,
	.check_legacy_ioport	= pSeries_check_legacy_ioport,
	.system_reset_exception = pSeries_system_reset_exception,
	.machine_check_exception = pSeries_machine_check_exception,
#ifdef CONFIG_KEXEC
	.kexec_cpu_down		= pseries_kexec_cpu_down,
	.machine_kexec		= default_machine_kexec,
	.machine_kexec_prepare	= default_machine_kexec_prepare,
	.machine_crash_shutdown	= default_machine_crash_shutdown,
#endif
};