blob: 647c7b6e675616a13fbfd16f5a368a620bf3b9ec [file] [log] [blame]
Bob Moore7db5d822008-12-30 11:04:48 +08001
2/******************************************************************************
3 *
4 * Module Name: hwxface - Public ACPICA hardware interfaces
5 *
6 *****************************************************************************/
7
8/*
9 * Copyright (C) 2000 - 2008, Intel Corp.
10 * All rights reserved.
11 *
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
14 * are met:
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions, and the following disclaimer,
17 * without modification.
18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19 * substantially similar to the "NO WARRANTY" disclaimer below
20 * ("Disclaimer") and any redistribution must be conditioned upon
21 * including a substantially similar Disclaimer requirement for further
22 * binary redistribution.
23 * 3. Neither the names of the above-listed copyright holders nor the names
24 * of any contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
26 *
27 * Alternatively, this software may be distributed under the terms of the
28 * GNU General Public License ("GPL") version 2 as published by the Free
29 * Software Foundation.
30 *
31 * NO WARRANTY
32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42 * POSSIBILITY OF SUCH DAMAGES.
43 */
44
45#include <acpi/acpi.h>
Len Browne2f7a772009-01-09 00:30:03 -050046#include "accommon.h"
47#include "acnamesp.h"
Bob Moore7db5d822008-12-30 11:04:48 +080048
49#define _COMPONENT ACPI_HARDWARE
50ACPI_MODULE_NAME("hwxface")
51
52/******************************************************************************
53 *
Bob Moored3fd9022008-12-30 11:11:57 +080054 * FUNCTION: acpi_reset
55 *
56 * PARAMETERS: None
57 *
58 * RETURN: Status
59 *
60 * DESCRIPTION: Set reset register in memory or IO space. Note: Does not
61 * support reset register in PCI config space, this must be
62 * handled separately.
63 *
64 ******************************************************************************/
65acpi_status acpi_reset(void)
66{
67 struct acpi_generic_address *reset_reg;
68 acpi_status status;
69
70 ACPI_FUNCTION_TRACE(acpi_reset);
71
72 reset_reg = &acpi_gbl_FADT.reset_register;
73
74 /* Check if the reset register is supported */
75
76 if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) ||
77 !reset_reg->address) {
78 return_ACPI_STATUS(AE_NOT_EXIST);
79 }
80
Bob Moore8a964232009-08-13 13:42:19 +080081 if (reset_reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
82 /*
83 * For I/O space, write directly to the OSL. This bypasses the port
84 * validation mechanism, which may block a valid write to the reset
85 * register.
86 */
87 status =
88 acpi_os_write_port((acpi_io_address) reset_reg->address,
89 acpi_gbl_FADT.reset_value,
90 reset_reg->bit_width);
91 } else {
92 /* Write the reset value to the reset register */
Bob Moored3fd9022008-12-30 11:11:57 +080093
Bob Moore8a964232009-08-13 13:42:19 +080094 status = acpi_hw_write(acpi_gbl_FADT.reset_value, reset_reg);
95 }
96
Bob Moored3fd9022008-12-30 11:11:57 +080097 return_ACPI_STATUS(status);
98}
99
100ACPI_EXPORT_SYMBOL(acpi_reset)
101
102/******************************************************************************
103 *
Bob Moore7db5d822008-12-30 11:04:48 +0800104 * FUNCTION: acpi_read
105 *
106 * PARAMETERS: Value - Where the value is returned
107 * Reg - GAS register structure
108 *
109 * RETURN: Status
110 *
111 * DESCRIPTION: Read from either memory or IO space.
112 *
Bob Moorec6b57742009-06-24 09:44:06 +0800113 * LIMITATIONS: <These limitations also apply to acpi_write>
114 * bit_width must be exactly 8, 16, 32, or 64.
115 * space_iD must be system_memory or system_iO.
116 * bit_offset and access_width are currently ignored, as there has
117 * not been a need to implement these.
118 *
Bob Moore7db5d822008-12-30 11:04:48 +0800119 ******************************************************************************/
Bob Moorec6b57742009-06-24 09:44:06 +0800120acpi_status acpi_read(u64 *return_value, struct acpi_generic_address *reg)
Bob Moore7db5d822008-12-30 11:04:48 +0800121{
Bob Moorec6b57742009-06-24 09:44:06 +0800122 u32 value;
Bob Moore7db5d822008-12-30 11:04:48 +0800123 u32 width;
124 u64 address;
125 acpi_status status;
126
127 ACPI_FUNCTION_NAME(acpi_read);
128
Bob Moorec6b57742009-06-24 09:44:06 +0800129 if (!return_value) {
Bob Mooreac0c8452009-02-18 14:28:02 +0800130 return (AE_BAD_PARAMETER);
Bob Moore7db5d822008-12-30 11:04:48 +0800131 }
132
Bob Moorec6b57742009-06-24 09:44:06 +0800133 /* Validate contents of the GAS register. Allow 64-bit transfers */
Bob Moore7db5d822008-12-30 11:04:48 +0800134
Bob Moorec6b57742009-06-24 09:44:06 +0800135 status = acpi_hw_validate_register(reg, 64, &address);
136 if (ACPI_FAILURE(status)) {
137 return (status);
Bob Moore7db5d822008-12-30 11:04:48 +0800138 }
139
Bob Moore7db5d822008-12-30 11:04:48 +0800140 width = reg->bit_width;
Bob Moorec6b57742009-06-24 09:44:06 +0800141 if (width == 64) {
142 width = 32; /* Break into two 32-bit transfers */
Bob Moore7db5d822008-12-30 11:04:48 +0800143 }
144
Bob Moorec6b57742009-06-24 09:44:06 +0800145 /* Initialize entire 64-bit return value to zero */
Bob Moore7db5d822008-12-30 11:04:48 +0800146
Bob Moorec6b57742009-06-24 09:44:06 +0800147 *return_value = 0;
148 value = 0;
Bob Moore7db5d822008-12-30 11:04:48 +0800149
150 /*
Bob Moore88dcb042009-02-18 16:01:04 +0800151 * Two address spaces supported: Memory or IO. PCI_Config is
152 * not supported here because the GAS structure is insufficient
Bob Moore7db5d822008-12-30 11:04:48 +0800153 */
Bob Moorec6b57742009-06-24 09:44:06 +0800154 if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
155 status = acpi_os_read_memory((acpi_physical_address)
156 address, &value, width);
157 if (ACPI_FAILURE(status)) {
158 return (status);
159 }
160 *return_value = value;
Bob Moore7db5d822008-12-30 11:04:48 +0800161
Bob Moorec6b57742009-06-24 09:44:06 +0800162 if (reg->bit_width == 64) {
Bob Moore7db5d822008-12-30 11:04:48 +0800163
Bob Moorec6b57742009-06-24 09:44:06 +0800164 /* Read the top 32 bits */
Bob Moore7db5d822008-12-30 11:04:48 +0800165
Bob Moorec6b57742009-06-24 09:44:06 +0800166 status = acpi_os_read_memory((acpi_physical_address)
167 (address + 4), &value, 32);
168 if (ACPI_FAILURE(status)) {
169 return (status);
170 }
171 *return_value |= ((u64)value << 32);
172 }
173 } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
Bob Moore7db5d822008-12-30 11:04:48 +0800174
Bob Moorec6b57742009-06-24 09:44:06 +0800175 status = acpi_hw_read_port((acpi_io_address)
176 address, &value, width);
177 if (ACPI_FAILURE(status)) {
178 return (status);
179 }
180 *return_value = value;
181
182 if (reg->bit_width == 64) {
183
184 /* Read the top 32 bits */
185
186 status = acpi_hw_read_port((acpi_io_address)
187 (address + 4), &value, 32);
188 if (ACPI_FAILURE(status)) {
189 return (status);
190 }
191 *return_value |= ((u64)value << 32);
192 }
Bob Moore7db5d822008-12-30 11:04:48 +0800193 }
194
195 ACPI_DEBUG_PRINT((ACPI_DB_IO,
Bob Moorec6b57742009-06-24 09:44:06 +0800196 "Read: %8.8X%8.8X width %2d from %8.8X%8.8X (%s)\n",
197 ACPI_FORMAT_UINT64(*return_value), reg->bit_width,
198 ACPI_FORMAT_UINT64(address),
Bob Moore7db5d822008-12-30 11:04:48 +0800199 acpi_ut_get_region_name(reg->space_id)));
200
201 return (status);
202}
203
204ACPI_EXPORT_SYMBOL(acpi_read)
205
206/******************************************************************************
207 *
208 * FUNCTION: acpi_write
209 *
Bob Moorec6b57742009-06-24 09:44:06 +0800210 * PARAMETERS: Value - Value to be written
Bob Moore7db5d822008-12-30 11:04:48 +0800211 * Reg - GAS register structure
212 *
213 * RETURN: Status
214 *
215 * DESCRIPTION: Write to either memory or IO space.
216 *
217 ******************************************************************************/
Bob Moorec6b57742009-06-24 09:44:06 +0800218acpi_status acpi_write(u64 value, struct acpi_generic_address *reg)
Bob Moore7db5d822008-12-30 11:04:48 +0800219{
220 u32 width;
221 u64 address;
222 acpi_status status;
223
224 ACPI_FUNCTION_NAME(acpi_write);
225
Bob Moorec6b57742009-06-24 09:44:06 +0800226 /* Validate contents of the GAS register. Allow 64-bit transfers */
227
228 status = acpi_hw_validate_register(reg, 64, &address);
229 if (ACPI_FAILURE(status)) {
230 return (status);
Bob Moore7db5d822008-12-30 11:04:48 +0800231 }
232
Bob Moore7db5d822008-12-30 11:04:48 +0800233 width = reg->bit_width;
Bob Moorec6b57742009-06-24 09:44:06 +0800234 if (width == 64) {
235 width = 32; /* Break into two 32-bit transfers */
Bob Moore7db5d822008-12-30 11:04:48 +0800236 }
237
238 /*
Bob Moorec6b57742009-06-24 09:44:06 +0800239 * Two address spaces supported: Memory or IO. PCI_Config is
240 * not supported here because the GAS structure is insufficient
Bob Moore7db5d822008-12-30 11:04:48 +0800241 */
Bob Moorec6b57742009-06-24 09:44:06 +0800242 if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
243 status = acpi_os_write_memory((acpi_physical_address)
244 address, ACPI_LODWORD(value),
245 width);
246 if (ACPI_FAILURE(status)) {
247 return (status);
248 }
Bob Moore7db5d822008-12-30 11:04:48 +0800249
Bob Moorec6b57742009-06-24 09:44:06 +0800250 if (reg->bit_width == 64) {
251 status = acpi_os_write_memory((acpi_physical_address)
252 (address + 4),
253 ACPI_HIDWORD(value), 32);
254 if (ACPI_FAILURE(status)) {
255 return (status);
256 }
257 }
258 } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
Bob Moore7db5d822008-12-30 11:04:48 +0800259
Bob Moorec6b57742009-06-24 09:44:06 +0800260 status = acpi_hw_write_port((acpi_io_address)
261 address, ACPI_LODWORD(value),
Bob Moore7db5d822008-12-30 11:04:48 +0800262 width);
Bob Moorec6b57742009-06-24 09:44:06 +0800263 if (ACPI_FAILURE(status)) {
264 return (status);
265 }
Bob Moore7db5d822008-12-30 11:04:48 +0800266
Bob Moorec6b57742009-06-24 09:44:06 +0800267 if (reg->bit_width == 64) {
268 status = acpi_hw_write_port((acpi_io_address)
269 (address + 4),
270 ACPI_HIDWORD(value), 32);
271 if (ACPI_FAILURE(status)) {
272 return (status);
273 }
274 }
Bob Moore7db5d822008-12-30 11:04:48 +0800275 }
276
277 ACPI_DEBUG_PRINT((ACPI_DB_IO,
Bob Moorec6b57742009-06-24 09:44:06 +0800278 "Wrote: %8.8X%8.8X width %2d to %8.8X%8.8X (%s)\n",
279 ACPI_FORMAT_UINT64(value), reg->bit_width,
280 ACPI_FORMAT_UINT64(address),
Bob Moore7db5d822008-12-30 11:04:48 +0800281 acpi_ut_get_region_name(reg->space_id)));
282
283 return (status);
284}
285
286ACPI_EXPORT_SYMBOL(acpi_write)
287
288/*******************************************************************************
289 *
Bob Moore50ffba12009-02-23 15:02:07 +0800290 * FUNCTION: acpi_read_bit_register
Bob Moore7db5d822008-12-30 11:04:48 +0800291 *
Bob Moore9892dd22009-02-18 15:10:07 +0800292 * PARAMETERS: register_id - ID of ACPI Bit Register to access
293 * return_value - Value that was read from the register,
294 * normalized to bit position zero.
Bob Moore7db5d822008-12-30 11:04:48 +0800295 *
Bob Moore9892dd22009-02-18 15:10:07 +0800296 * RETURN: Status and the value read from the specified Register. Value
Bob Moore7db5d822008-12-30 11:04:48 +0800297 * returned is normalized to bit0 (is shifted all the way right)
298 *
299 * DESCRIPTION: ACPI bit_register read function. Does not acquire the HW lock.
300 *
Bob Moore9892dd22009-02-18 15:10:07 +0800301 * SUPPORTS: Bit fields in PM1 Status, PM1 Enable, PM1 Control, and
302 * PM2 Control.
303 *
304 * Note: The hardware lock is not required when reading the ACPI bit registers
305 * since almost all of them are single bit and it does not matter that
306 * the parent hardware register can be split across two physical
307 * registers. The only multi-bit field is SLP_TYP in the PM1 control
308 * register, but this field does not cross an 8-bit boundary (nor does
309 * it make much sense to actually read this field.)
310 *
Bob Moore7db5d822008-12-30 11:04:48 +0800311 ******************************************************************************/
Bob Moore50ffba12009-02-23 15:02:07 +0800312acpi_status acpi_read_bit_register(u32 register_id, u32 *return_value)
Bob Moore7db5d822008-12-30 11:04:48 +0800313{
Bob Moore7db5d822008-12-30 11:04:48 +0800314 struct acpi_bit_register_info *bit_reg_info;
Bob Moore88dcb042009-02-18 16:01:04 +0800315 u32 register_value;
316 u32 value;
Bob Moore7db5d822008-12-30 11:04:48 +0800317 acpi_status status;
318
Bob Moore88dcb042009-02-18 16:01:04 +0800319 ACPI_FUNCTION_TRACE_U32(acpi_read_bit_register, register_id);
Bob Moore7db5d822008-12-30 11:04:48 +0800320
321 /* Get the info structure corresponding to the requested ACPI Register */
322
323 bit_reg_info = acpi_hw_get_bit_register_info(register_id);
324 if (!bit_reg_info) {
325 return_ACPI_STATUS(AE_BAD_PARAMETER);
326 }
327
Bob Moore9892dd22009-02-18 15:10:07 +0800328 /* Read the entire parent register */
Bob Moore7db5d822008-12-30 11:04:48 +0800329
330 status = acpi_hw_register_read(bit_reg_info->parent_register,
331 &register_value);
Bob Moore88dcb042009-02-18 16:01:04 +0800332 if (ACPI_FAILURE(status)) {
333 return_ACPI_STATUS(status);
Bob Moore7db5d822008-12-30 11:04:48 +0800334 }
335
Bob Moore88dcb042009-02-18 16:01:04 +0800336 /* Normalize the value that was read, mask off other bits */
337
338 value = ((register_value & bit_reg_info->access_bit_mask)
339 >> bit_reg_info->bit_position);
340
341 ACPI_DEBUG_PRINT((ACPI_DB_IO,
342 "BitReg %X, ParentReg %X, Actual %8.8X, ReturnValue %8.8X\n",
343 register_id, bit_reg_info->parent_register,
344 register_value, value));
345
346 *return_value = value;
347 return_ACPI_STATUS(AE_OK);
Bob Moore7db5d822008-12-30 11:04:48 +0800348}
349
Bob Moore50ffba12009-02-23 15:02:07 +0800350ACPI_EXPORT_SYMBOL(acpi_read_bit_register)
Bob Moore7db5d822008-12-30 11:04:48 +0800351
352/*******************************************************************************
353 *
Bob Moore50ffba12009-02-23 15:02:07 +0800354 * FUNCTION: acpi_write_bit_register
Bob Moore7db5d822008-12-30 11:04:48 +0800355 *
Bob Moore9892dd22009-02-18 15:10:07 +0800356 * PARAMETERS: register_id - ID of ACPI Bit Register to access
357 * Value - Value to write to the register, in bit
358 * position zero. The bit is automaticallly
359 * shifted to the correct position.
Bob Moore7db5d822008-12-30 11:04:48 +0800360 *
361 * RETURN: Status
362 *
Bob Moore9892dd22009-02-18 15:10:07 +0800363 * DESCRIPTION: ACPI Bit Register write function. Acquires the hardware lock
364 * since most operations require a read/modify/write sequence.
365 *
366 * SUPPORTS: Bit fields in PM1 Status, PM1 Enable, PM1 Control, and
367 * PM2 Control.
Bob Moore7db5d822008-12-30 11:04:48 +0800368 *
Bob Moore88dcb042009-02-18 16:01:04 +0800369 * Note that at this level, the fact that there may be actually two
370 * hardware registers (A and B - and B may not exist) is abstracted.
371 *
Bob Moore7db5d822008-12-30 11:04:48 +0800372 ******************************************************************************/
Bob Moore50ffba12009-02-23 15:02:07 +0800373acpi_status acpi_write_bit_register(u32 register_id, u32 value)
Bob Moore7db5d822008-12-30 11:04:48 +0800374{
Bob Moore7db5d822008-12-30 11:04:48 +0800375 struct acpi_bit_register_info *bit_reg_info;
Bob Moore7db5d822008-12-30 11:04:48 +0800376 acpi_cpu_flags lock_flags;
Bob Moore88dcb042009-02-18 16:01:04 +0800377 u32 register_value;
378 acpi_status status = AE_OK;
Bob Moore7db5d822008-12-30 11:04:48 +0800379
Bob Moore50ffba12009-02-23 15:02:07 +0800380 ACPI_FUNCTION_TRACE_U32(acpi_write_bit_register, register_id);
Bob Moore7db5d822008-12-30 11:04:48 +0800381
382 /* Get the info structure corresponding to the requested ACPI Register */
383
384 bit_reg_info = acpi_hw_get_bit_register_info(register_id);
385 if (!bit_reg_info) {
Bob Moore7db5d822008-12-30 11:04:48 +0800386 return_ACPI_STATUS(AE_BAD_PARAMETER);
387 }
388
389 lock_flags = acpi_os_acquire_lock(acpi_gbl_hardware_lock);
390
Bob Moore7db5d822008-12-30 11:04:48 +0800391 /*
Bob Moore88dcb042009-02-18 16:01:04 +0800392 * At this point, we know that the parent register is one of the
393 * following: PM1 Status, PM1 Enable, PM1 Control, or PM2 Control
Bob Moore7db5d822008-12-30 11:04:48 +0800394 */
Bob Moore88dcb042009-02-18 16:01:04 +0800395 if (bit_reg_info->parent_register != ACPI_REGISTER_PM1_STATUS) {
Bob Moore7db5d822008-12-30 11:04:48 +0800396 /*
Bob Moore88dcb042009-02-18 16:01:04 +0800397 * 1) Case for PM1 Enable, PM1 Control, and PM2 Control
398 *
399 * Perform a register read to preserve the bits that we are not
400 * interested in
Bob Moore7db5d822008-12-30 11:04:48 +0800401 */
Bob Moore88dcb042009-02-18 16:01:04 +0800402 status = acpi_hw_register_read(bit_reg_info->parent_register,
Bob Moore7db5d822008-12-30 11:04:48 +0800403 &register_value);
404 if (ACPI_FAILURE(status)) {
405 goto unlock_and_exit;
406 }
407
Bob Moore88dcb042009-02-18 16:01:04 +0800408 /*
409 * Insert the input bit into the value that was just read
410 * and write the register
411 */
Bob Moore7db5d822008-12-30 11:04:48 +0800412 ACPI_REGISTER_INSERT_VALUE(register_value,
413 bit_reg_info->bit_position,
414 bit_reg_info->access_bit_mask,
415 value);
416
Bob Moore88dcb042009-02-18 16:01:04 +0800417 status = acpi_hw_register_write(bit_reg_info->parent_register,
418 register_value);
419 } else {
420 /*
421 * 2) Case for PM1 Status
422 *
423 * The Status register is different from the rest. Clear an event
424 * by writing 1, writing 0 has no effect. So, the only relevant
425 * information is the single bit we're interested in, all others
426 * should be written as 0 so they will be left unchanged.
427 */
428 register_value = ACPI_REGISTER_PREPARE_BITS(value,
429 bit_reg_info->
430 bit_position,
431 bit_reg_info->
432 access_bit_mask);
Bob Moore7db5d822008-12-30 11:04:48 +0800433
Bob Moore88dcb042009-02-18 16:01:04 +0800434 /* No need to write the register if value is all zeros */
Bob Moore7db5d822008-12-30 11:04:48 +0800435
Bob Moore88dcb042009-02-18 16:01:04 +0800436 if (register_value) {
437 status =
438 acpi_hw_register_write(ACPI_REGISTER_PM1_STATUS,
439 register_value);
440 }
Bob Moore7db5d822008-12-30 11:04:48 +0800441 }
442
Bob Moore88dcb042009-02-18 16:01:04 +0800443 ACPI_DEBUG_PRINT((ACPI_DB_IO,
444 "BitReg %X, ParentReg %X, Value %8.8X, Actual %8.8X\n",
445 register_id, bit_reg_info->parent_register, value,
446 register_value));
447
448unlock_and_exit:
Bob Moore7db5d822008-12-30 11:04:48 +0800449
450 acpi_os_release_lock(acpi_gbl_hardware_lock, lock_flags);
Bob Moore7db5d822008-12-30 11:04:48 +0800451 return_ACPI_STATUS(status);
452}
453
Bob Moore50ffba12009-02-23 15:02:07 +0800454ACPI_EXPORT_SYMBOL(acpi_write_bit_register)
Bob Moore7db5d822008-12-30 11:04:48 +0800455
456/*******************************************************************************
457 *
458 * FUNCTION: acpi_get_sleep_type_data
459 *
460 * PARAMETERS: sleep_state - Numeric sleep state
461 * *sleep_type_a - Where SLP_TYPa is returned
462 * *sleep_type_b - Where SLP_TYPb is returned
463 *
464 * RETURN: Status - ACPI status
465 *
466 * DESCRIPTION: Obtain the SLP_TYPa and SLP_TYPb values for the requested sleep
467 * state.
468 *
469 ******************************************************************************/
470acpi_status
471acpi_get_sleep_type_data(u8 sleep_state, u8 *sleep_type_a, u8 *sleep_type_b)
472{
473 acpi_status status = AE_OK;
474 struct acpi_evaluate_info *info;
475
476 ACPI_FUNCTION_TRACE(acpi_get_sleep_type_data);
477
478 /* Validate parameters */
479
480 if ((sleep_state > ACPI_S_STATES_MAX) || !sleep_type_a || !sleep_type_b) {
481 return_ACPI_STATUS(AE_BAD_PARAMETER);
482 }
483
484 /* Allocate the evaluation information block */
485
486 info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
487 if (!info) {
488 return_ACPI_STATUS(AE_NO_MEMORY);
489 }
490
491 info->pathname =
492 ACPI_CAST_PTR(char, acpi_gbl_sleep_state_names[sleep_state]);
493
494 /* Evaluate the namespace object containing the values for this state */
495
496 status = acpi_ns_evaluate(info);
497 if (ACPI_FAILURE(status)) {
498 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
499 "%s while evaluating SleepState [%s]\n",
500 acpi_format_exception(status),
501 info->pathname));
502
503 goto cleanup;
504 }
505
506 /* Must have a return object */
507
508 if (!info->return_object) {
509 ACPI_ERROR((AE_INFO, "No Sleep State object returned from [%s]",
510 info->pathname));
511 status = AE_NOT_EXIST;
512 }
513
514 /* It must be of type Package */
515
Bob Moore3371c192009-02-18 14:44:03 +0800516 else if (info->return_object->common.type != ACPI_TYPE_PACKAGE) {
Bob Moore7db5d822008-12-30 11:04:48 +0800517 ACPI_ERROR((AE_INFO,
518 "Sleep State return object is not a Package"));
519 status = AE_AML_OPERAND_TYPE;
520 }
521
522 /*
523 * The package must have at least two elements. NOTE (March 2005): This
524 * goes against the current ACPI spec which defines this object as a
525 * package with one encoded DWORD element. However, existing practice
526 * by BIOS vendors seems to be to have 2 or more elements, at least
527 * one per sleep type (A/B).
528 */
529 else if (info->return_object->package.count < 2) {
530 ACPI_ERROR((AE_INFO,
531 "Sleep State return package does not have at least two elements"));
532 status = AE_AML_NO_OPERAND;
533 }
534
535 /* The first two elements must both be of type Integer */
536
Bob Moore3371c192009-02-18 14:44:03 +0800537 else if (((info->return_object->package.elements[0])->common.type
Bob Moore7db5d822008-12-30 11:04:48 +0800538 != ACPI_TYPE_INTEGER) ||
Bob Moore3371c192009-02-18 14:44:03 +0800539 ((info->return_object->package.elements[1])->common.type
Bob Moore7db5d822008-12-30 11:04:48 +0800540 != ACPI_TYPE_INTEGER)) {
541 ACPI_ERROR((AE_INFO,
Bob Moored4913dc2009-03-06 10:05:18 +0800542 "Sleep State return package elements are not both Integers "
543 "(%s, %s)",
Bob Moore7db5d822008-12-30 11:04:48 +0800544 acpi_ut_get_object_type_name(info->return_object->
545 package.elements[0]),
546 acpi_ut_get_object_type_name(info->return_object->
547 package.elements[1])));
548 status = AE_AML_OPERAND_TYPE;
549 } else {
550 /* Valid _Sx_ package size, type, and value */
551
552 *sleep_type_a = (u8)
553 (info->return_object->package.elements[0])->integer.value;
554 *sleep_type_b = (u8)
555 (info->return_object->package.elements[1])->integer.value;
556 }
557
558 if (ACPI_FAILURE(status)) {
559 ACPI_EXCEPTION((AE_INFO, status,
560 "While evaluating SleepState [%s], bad Sleep object %p type %s",
561 info->pathname, info->return_object,
562 acpi_ut_get_object_type_name(info->
563 return_object)));
564 }
565
566 acpi_ut_remove_reference(info->return_object);
567
568 cleanup:
569 ACPI_FREE(info);
570 return_ACPI_STATUS(status);
571}
572
573ACPI_EXPORT_SYMBOL(acpi_get_sleep_type_data)