blob: 86885a445f977fdf43eb2dd5c2122b804fcaa410 [file] [log] [blame]
Jeff Garzik669a5db2006-08-29 18:12:40 -04001/*
2 * pata_optidma.c - Opti DMA PATA for new ATA layer
3 * (C) 2006 Red Hat Inc
Jeff Garzik669a5db2006-08-29 18:12:40 -04004 *
5 * The Opti DMA controllers are related to the older PIO PCI controllers
6 * and indeed the VLB ones. The main differences are that the timing
7 * numbers are now based off PCI clocks not VLB and differ, and that
8 * MWDMA is supported.
9 *
10 * This driver should support Viper-N+, FireStar, FireStar Plus.
11 *
12 * These devices support virtual DMA for read (aka the CS5520). Later
13 * chips support UDMA33, but only if the rest of the board logic does,
14 * so you have to get this right. We don't support the virtual DMA
15 * but we do handle UDMA.
16 *
17 * Bits that are worth knowing
18 * Most control registers are shadowed into I/O registers
19 * 0x1F5 bit 0 tells you if the PCI/VLB clock is 33 or 25Mhz
20 * Virtual DMA registers *move* between rev 0x02 and rev 0x10
21 * UDMA requires a 66MHz FSB
22 *
23 */
24
25#include <linux/kernel.h>
26#include <linux/module.h>
27#include <linux/pci.h>
28#include <linux/init.h>
29#include <linux/blkdev.h>
30#include <linux/delay.h>
31#include <scsi/scsi_host.h>
32#include <linux/libata.h>
33
34#define DRV_NAME "pata_optidma"
Alan Cox5c25bf02007-03-26 21:43:43 -080035#define DRV_VERSION "0.3.2"
Jeff Garzik669a5db2006-08-29 18:12:40 -040036
37enum {
38 READ_REG = 0, /* index of Read cycle timing register */
39 WRITE_REG = 1, /* index of Write cycle timing register */
40 CNTRL_REG = 3, /* index of Control register */
41 STRAP_REG = 5, /* index of Strap register */
42 MISC_REG = 6 /* index of Miscellaneous register */
43};
44
45static int pci_clock; /* 0 = 33 1 = 25 */
46
47/**
48 * optidma_pre_reset - probe begin
Tejun Heocc0680a2007-08-06 18:36:23 +090049 * @link: ATA link
Tejun Heod4b2bab2007-02-02 16:50:52 +090050 * @deadline: deadline jiffies for the operation
Jeff Garzik669a5db2006-08-29 18:12:40 -040051 *
52 * Set up cable type and use generic probe init
53 */
Jeff Garzik85cd7252006-08-31 00:03:49 -040054
Tejun Heocc0680a2007-08-06 18:36:23 +090055static int optidma_pre_reset(struct ata_link *link, unsigned long deadline)
Jeff Garzik669a5db2006-08-29 18:12:40 -040056{
Tejun Heocc0680a2007-08-06 18:36:23 +090057 struct ata_port *ap = link->ap;
Jeff Garzik669a5db2006-08-29 18:12:40 -040058 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
Jeff Garzik85cd7252006-08-31 00:03:49 -040059 static const struct pci_bits optidma_enable_bits = {
Jeff Garzik669a5db2006-08-29 18:12:40 -040060 0x40, 1, 0x08, 0x00
61 };
62
Alan Coxc9619222006-09-26 17:53:38 +010063 if (ap->port_no && !pci_test_config_bits(pdev, &optidma_enable_bits))
64 return -ENOENT;
65
Tejun Heo9363c382008-04-07 22:47:16 +090066 return ata_sff_prereset(link, deadline);
Jeff Garzik669a5db2006-08-29 18:12:40 -040067}
68
69/**
Jeff Garzik669a5db2006-08-29 18:12:40 -040070 * optidma_unlock - unlock control registers
71 * @ap: ATA port
72 *
73 * Unlock the control register block for this adapter. Registers must not
74 * be unlocked in a situation where libata might look at them.
75 */
Jeff Garzik85cd7252006-08-31 00:03:49 -040076
Jeff Garzik669a5db2006-08-29 18:12:40 -040077static void optidma_unlock(struct ata_port *ap)
78{
Tejun Heo0d5ff562007-02-01 15:06:36 +090079 void __iomem *regio = ap->ioaddr.cmd_addr;
Jeff Garzik85cd7252006-08-31 00:03:49 -040080
Jeff Garzik669a5db2006-08-29 18:12:40 -040081 /* These 3 unlock the control register access */
Tejun Heo0d5ff562007-02-01 15:06:36 +090082 ioread16(regio + 1);
83 ioread16(regio + 1);
84 iowrite8(3, regio + 2);
Jeff Garzik669a5db2006-08-29 18:12:40 -040085}
86
87/**
88 * optidma_lock - issue temporary relock
89 * @ap: ATA port
90 *
91 * Re-lock the configuration register settings.
92 */
Jeff Garzik85cd7252006-08-31 00:03:49 -040093
Jeff Garzik669a5db2006-08-29 18:12:40 -040094static void optidma_lock(struct ata_port *ap)
95{
Tejun Heo0d5ff562007-02-01 15:06:36 +090096 void __iomem *regio = ap->ioaddr.cmd_addr;
Jeff Garzik85cd7252006-08-31 00:03:49 -040097
Jeff Garzik669a5db2006-08-29 18:12:40 -040098 /* Relock */
Tejun Heo0d5ff562007-02-01 15:06:36 +090099 iowrite8(0x83, regio + 2);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400100}
101
102/**
Alan Cox5c25bf02007-03-26 21:43:43 -0800103 * optidma_mode_setup - set mode data
Jeff Garzik669a5db2006-08-29 18:12:40 -0400104 * @ap: ATA interface
105 * @adev: ATA device
106 * @mode: Mode to set
107 *
108 * Called to do the DMA or PIO mode setup. Timing numbers are all
109 * pre computed to keep the code clean. There are two tables depending
110 * on the hardware clock speed.
111 *
112 * WARNING: While we do this the IDE registers vanish. If we take an
113 * IRQ here we depend on the host set locking to avoid catastrophe.
114 */
115
Alan Cox5c25bf02007-03-26 21:43:43 -0800116static void optidma_mode_setup(struct ata_port *ap, struct ata_device *adev, u8 mode)
Jeff Garzik669a5db2006-08-29 18:12:40 -0400117{
118 struct ata_device *pair = ata_dev_pair(adev);
119 int pio = adev->pio_mode - XFER_PIO_0;
120 int dma = adev->dma_mode - XFER_MW_DMA_0;
Tejun Heo0d5ff562007-02-01 15:06:36 +0900121 void __iomem *regio = ap->ioaddr.cmd_addr;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400122 u8 addr;
123
124 /* Address table precomputed with a DCLK of 2 */
125 static const u8 addr_timing[2][5] = {
126 { 0x30, 0x20, 0x20, 0x10, 0x10 },
127 { 0x20, 0x20, 0x10, 0x10, 0x10 }
128 };
129 static const u8 data_rec_timing[2][5] = {
130 { 0x59, 0x46, 0x30, 0x20, 0x20 },
131 { 0x46, 0x32, 0x20, 0x20, 0x10 }
132 };
133 static const u8 dma_data_rec_timing[2][3] = {
134 { 0x76, 0x20, 0x20 },
135 { 0x54, 0x20, 0x10 }
136 };
137
138 /* Switch from IDE to control mode */
139 optidma_unlock(ap);
Jeff Garzik85cd7252006-08-31 00:03:49 -0400140
Jeff Garzik669a5db2006-08-29 18:12:40 -0400141
142 /*
143 * As with many controllers the address setup time is shared
144 * and must suit both devices if present. FIXME: Check if we
145 * need to look at slowest of PIO/DMA mode of either device
146 */
147
148 if (mode >= XFER_MW_DMA_0)
149 addr = 0;
150 else
151 addr = addr_timing[pci_clock][pio];
Jeff Garzik85cd7252006-08-31 00:03:49 -0400152
Jeff Garzik669a5db2006-08-29 18:12:40 -0400153 if (pair) {
154 u8 pair_addr;
155 /* Hardware constraint */
156 if (pair->dma_mode)
157 pair_addr = 0;
158 else
159 pair_addr = addr_timing[pci_clock][pair->pio_mode - XFER_PIO_0];
160 if (pair_addr > addr)
161 addr = pair_addr;
162 }
Jeff Garzik85cd7252006-08-31 00:03:49 -0400163
Jeff Garzik669a5db2006-08-29 18:12:40 -0400164 /* Commence primary programming sequence */
165 /* First we load the device number into the timing select */
Tejun Heo0d5ff562007-02-01 15:06:36 +0900166 iowrite8(adev->devno, regio + MISC_REG);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400167 /* Now we load the data timings into read data/write data */
168 if (mode < XFER_MW_DMA_0) {
Tejun Heo0d5ff562007-02-01 15:06:36 +0900169 iowrite8(data_rec_timing[pci_clock][pio], regio + READ_REG);
170 iowrite8(data_rec_timing[pci_clock][pio], regio + WRITE_REG);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400171 } else if (mode < XFER_UDMA_0) {
Tejun Heo0d5ff562007-02-01 15:06:36 +0900172 iowrite8(dma_data_rec_timing[pci_clock][dma], regio + READ_REG);
173 iowrite8(dma_data_rec_timing[pci_clock][dma], regio + WRITE_REG);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400174 }
175 /* Finally we load the address setup into the misc register */
Tejun Heo0d5ff562007-02-01 15:06:36 +0900176 iowrite8(addr | adev->devno, regio + MISC_REG);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400177
178 /* Programming sequence complete, timing 0 dev 0, timing 1 dev 1 */
Tejun Heo0d5ff562007-02-01 15:06:36 +0900179 iowrite8(0x85, regio + CNTRL_REG);
Jeff Garzik85cd7252006-08-31 00:03:49 -0400180
Jeff Garzik669a5db2006-08-29 18:12:40 -0400181 /* Switch back to IDE mode */
182 optidma_lock(ap);
Jeff Garzik85cd7252006-08-31 00:03:49 -0400183
Jeff Garzik669a5db2006-08-29 18:12:40 -0400184 /* Note: at this point our programming is incomplete. We are
185 not supposed to program PCI 0x43 "things we hacked onto the chip"
186 until we've done both sets of PIO/DMA timings */
187}
188
189/**
Alan Cox5c25bf02007-03-26 21:43:43 -0800190 * optiplus_mode_setup - DMA setup for Firestar Plus
Jeff Garzik669a5db2006-08-29 18:12:40 -0400191 * @ap: ATA port
192 * @adev: device
193 * @mode: desired mode
194 *
195 * The Firestar plus has additional UDMA functionality for UDMA0-2 and
196 * requires we do some additional work. Because the base work we must do
197 * is mostly shared we wrap the Firestar setup functionality in this
198 * one
199 */
200
Alan Cox5c25bf02007-03-26 21:43:43 -0800201static void optiplus_mode_setup(struct ata_port *ap, struct ata_device *adev, u8 mode)
Jeff Garzik669a5db2006-08-29 18:12:40 -0400202{
203 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
204 u8 udcfg;
205 u8 udslave;
206 int dev2 = 2 * adev->devno;
207 int unit = 2 * ap->port_no + adev->devno;
208 int udma = mode - XFER_UDMA_0;
Jeff Garzik85cd7252006-08-31 00:03:49 -0400209
Jeff Garzik669a5db2006-08-29 18:12:40 -0400210 pci_read_config_byte(pdev, 0x44, &udcfg);
211 if (mode <= XFER_UDMA_0) {
212 udcfg &= ~(1 << unit);
Alan Cox5c25bf02007-03-26 21:43:43 -0800213 optidma_mode_setup(ap, adev, adev->dma_mode);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400214 } else {
215 udcfg |= (1 << unit);
216 if (ap->port_no) {
217 pci_read_config_byte(pdev, 0x45, &udslave);
218 udslave &= ~(0x03 << dev2);
219 udslave |= (udma << dev2);
220 pci_write_config_byte(pdev, 0x45, udslave);
221 } else {
222 udcfg &= ~(0x30 << dev2);
223 udcfg |= (udma << dev2);
224 }
225 }
226 pci_write_config_byte(pdev, 0x44, udcfg);
227}
228
229/**
230 * optidma_set_pio_mode - PIO setup callback
231 * @ap: ATA port
232 * @adev: Device
233 *
234 * The libata core provides separate functions for handling PIO and
235 * DMA programming. The architecture of the Firestar makes it easier
236 * for us to have a common function so we provide wrappers
237 */
Jeff Garzik85cd7252006-08-31 00:03:49 -0400238
Jeff Garzik669a5db2006-08-29 18:12:40 -0400239static void optidma_set_pio_mode(struct ata_port *ap, struct ata_device *adev)
240{
Alan Cox5c25bf02007-03-26 21:43:43 -0800241 optidma_mode_setup(ap, adev, adev->pio_mode);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400242}
243
244/**
245 * optidma_set_dma_mode - DMA setup callback
246 * @ap: ATA port
247 * @adev: Device
248 *
249 * The libata core provides separate functions for handling PIO and
250 * DMA programming. The architecture of the Firestar makes it easier
251 * for us to have a common function so we provide wrappers
252 */
Jeff Garzik85cd7252006-08-31 00:03:49 -0400253
Jeff Garzik669a5db2006-08-29 18:12:40 -0400254static void optidma_set_dma_mode(struct ata_port *ap, struct ata_device *adev)
255{
Alan Cox5c25bf02007-03-26 21:43:43 -0800256 optidma_mode_setup(ap, adev, adev->dma_mode);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400257}
258
259/**
260 * optiplus_set_pio_mode - PIO setup callback
261 * @ap: ATA port
262 * @adev: Device
263 *
264 * The libata core provides separate functions for handling PIO and
265 * DMA programming. The architecture of the Firestar makes it easier
266 * for us to have a common function so we provide wrappers
267 */
Jeff Garzik85cd7252006-08-31 00:03:49 -0400268
Jeff Garzik669a5db2006-08-29 18:12:40 -0400269static void optiplus_set_pio_mode(struct ata_port *ap, struct ata_device *adev)
270{
Alan Cox5c25bf02007-03-26 21:43:43 -0800271 optiplus_mode_setup(ap, adev, adev->pio_mode);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400272}
273
274/**
275 * optiplus_set_dma_mode - DMA setup callback
276 * @ap: ATA port
277 * @adev: Device
278 *
279 * The libata core provides separate functions for handling PIO and
280 * DMA programming. The architecture of the Firestar makes it easier
281 * for us to have a common function so we provide wrappers
282 */
Jeff Garzik85cd7252006-08-31 00:03:49 -0400283
Jeff Garzik669a5db2006-08-29 18:12:40 -0400284static void optiplus_set_dma_mode(struct ata_port *ap, struct ata_device *adev)
285{
Alan Cox5c25bf02007-03-26 21:43:43 -0800286 optiplus_mode_setup(ap, adev, adev->dma_mode);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400287}
288
289/**
290 * optidma_make_bits - PCI setup helper
291 * @adev: ATA device
292 *
293 * Turn the ATA device setup into PCI configuration bits
294 * for register 0x43 and return the two bits needed.
295 */
Jeff Garzik85cd7252006-08-31 00:03:49 -0400296
Jeff Garzik669a5db2006-08-29 18:12:40 -0400297static u8 optidma_make_bits43(struct ata_device *adev)
298{
299 static const u8 bits43[5] = {
300 0, 0, 0, 1, 2
301 };
302 if (!ata_dev_enabled(adev))
303 return 0;
304 if (adev->dma_mode)
305 return adev->dma_mode - XFER_MW_DMA_0;
306 return bits43[adev->pio_mode - XFER_PIO_0];
307}
308
309/**
Alan Cox5c25bf02007-03-26 21:43:43 -0800310 * optidma_set_mode - mode setup
Tejun Heo02607312007-08-06 18:36:23 +0900311 * @link: link to set up
Jeff Garzik669a5db2006-08-29 18:12:40 -0400312 *
Alan Cox5c25bf02007-03-26 21:43:43 -0800313 * Use the standard setup to tune the chipset and then finalise the
314 * configuration by writing the nibble of extra bits of data into
315 * the chip.
Jeff Garzik669a5db2006-08-29 18:12:40 -0400316 */
Jeff Garzik85cd7252006-08-31 00:03:49 -0400317
Tejun Heo02607312007-08-06 18:36:23 +0900318static int optidma_set_mode(struct ata_link *link, struct ata_device **r_failed)
Jeff Garzik669a5db2006-08-29 18:12:40 -0400319{
Tejun Heo02607312007-08-06 18:36:23 +0900320 struct ata_port *ap = link->ap;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400321 u8 r;
322 int nybble = 4 * ap->port_no;
323 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
Tejun Heo02607312007-08-06 18:36:23 +0900324 int rc = ata_do_set_mode(link, r_failed);
Alan Cox5c25bf02007-03-26 21:43:43 -0800325 if (rc == 0) {
326 pci_read_config_byte(pdev, 0x43, &r);
Jeff Garzik85cd7252006-08-31 00:03:49 -0400327
Alan Cox5c25bf02007-03-26 21:43:43 -0800328 r &= (0x0F << nybble);
Tejun Heo02607312007-08-06 18:36:23 +0900329 r |= (optidma_make_bits43(&link->device[0]) +
330 (optidma_make_bits43(&link->device[0]) << 2)) << nybble;
Alan Cox5c25bf02007-03-26 21:43:43 -0800331 pci_write_config_byte(pdev, 0x43, r);
332 }
333 return rc;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400334}
335
336static struct scsi_host_template optidma_sht = {
Tejun Heo68d1d072008-03-25 12:22:49 +0900337 ATA_BMDMA_SHT(DRV_NAME),
Jeff Garzik669a5db2006-08-29 18:12:40 -0400338};
339
340static struct ata_port_operations optidma_port_ops = {
Tejun Heo029cfd62008-03-25 12:22:49 +0900341 .inherits = &ata_bmdma_port_ops,
342 .cable_detect = ata_cable_40wire,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400343 .set_piomode = optidma_set_pio_mode,
344 .set_dmamode = optidma_set_dma_mode,
Alan Cox5c25bf02007-03-26 21:43:43 -0800345 .set_mode = optidma_set_mode,
Tejun Heoa1efdab2008-03-25 12:22:50 +0900346 .prereset = optidma_pre_reset,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400347};
348
349static struct ata_port_operations optiplus_port_ops = {
Tejun Heo029cfd62008-03-25 12:22:49 +0900350 .inherits = &optidma_port_ops,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400351 .set_piomode = optiplus_set_pio_mode,
352 .set_dmamode = optiplus_set_dma_mode,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400353};
354
355/**
356 * optiplus_with_udma - Look for UDMA capable setup
357 * @pdev; ATA controller
358 */
Jeff Garzik85cd7252006-08-31 00:03:49 -0400359
Jeff Garzik669a5db2006-08-29 18:12:40 -0400360static int optiplus_with_udma(struct pci_dev *pdev)
361{
362 u8 r;
363 int ret = 0;
364 int ioport = 0x22;
365 struct pci_dev *dev1;
Jeff Garzik85cd7252006-08-31 00:03:49 -0400366
Jeff Garzik669a5db2006-08-29 18:12:40 -0400367 /* Find function 1 */
368 dev1 = pci_get_device(0x1045, 0xC701, NULL);
Jeff Garzikb4479162007-10-25 20:47:30 -0400369 if (dev1 == NULL)
Jeff Garzik669a5db2006-08-29 18:12:40 -0400370 return 0;
Jeff Garzik85cd7252006-08-31 00:03:49 -0400371
Jeff Garzik669a5db2006-08-29 18:12:40 -0400372 /* Rev must be >= 0x10 */
373 pci_read_config_byte(dev1, 0x08, &r);
374 if (r < 0x10)
375 goto done_nomsg;
376 /* Read the chipset system configuration to check our mode */
377 pci_read_config_byte(dev1, 0x5F, &r);
378 ioport |= (r << 8);
379 outb(0x10, ioport);
380 /* Must be 66Mhz sync */
381 if ((inb(ioport + 2) & 1) == 0)
382 goto done;
383
384 /* Check the ATA arbitration/timing is suitable */
385 pci_read_config_byte(pdev, 0x42, &r);
386 if ((r & 0x36) != 0x36)
387 goto done;
388 pci_read_config_byte(dev1, 0x52, &r);
389 if (r & 0x80) /* IDEDIR disabled */
390 ret = 1;
Jeff Garzik85cd7252006-08-31 00:03:49 -0400391done:
Jeff Garzik669a5db2006-08-29 18:12:40 -0400392 printk(KERN_WARNING "UDMA not supported in this configuration.\n");
393done_nomsg: /* Wrong chip revision */
394 pci_dev_put(dev1);
395 return ret;
396}
397
398static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
399{
Tejun Heo1626aeb2007-05-04 12:43:58 +0200400 static const struct ata_port_info info_82c700 = {
Jeff Garzik1d2808f2007-05-28 06:59:48 -0400401 .flags = ATA_FLAG_SLAVE_POSS,
Erik Inge Bolsø14bdef92009-03-14 21:38:24 +0100402 .pio_mask = ATA_PIO4,
403 .mwdma_mask = ATA_MWDMA2,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400404 .port_ops = &optidma_port_ops
405 };
Tejun Heo1626aeb2007-05-04 12:43:58 +0200406 static const struct ata_port_info info_82c700_udma = {
Jeff Garzik1d2808f2007-05-28 06:59:48 -0400407 .flags = ATA_FLAG_SLAVE_POSS,
Erik Inge Bolsø14bdef92009-03-14 21:38:24 +0100408 .pio_mask = ATA_PIO4,
409 .mwdma_mask = ATA_MWDMA2,
410 .udma_mask = ATA_UDMA2,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400411 .port_ops = &optiplus_port_ops
412 };
Tejun Heo1626aeb2007-05-04 12:43:58 +0200413 const struct ata_port_info *ppi[] = { &info_82c700, NULL };
Jeff Garzik669a5db2006-08-29 18:12:40 -0400414 static int printed_version;
Tejun Heof08048e2008-03-25 12:22:47 +0900415 int rc;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400416
417 if (!printed_version++)
418 dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
419
Tejun Heof08048e2008-03-25 12:22:47 +0900420 rc = pcim_enable_device(dev);
421 if (rc)
422 return rc;
423
Jeff Garzik669a5db2006-08-29 18:12:40 -0400424 /* Fixed location chipset magic */
425 inw(0x1F1);
426 inw(0x1F1);
427 pci_clock = inb(0x1F5) & 1; /* 0 = 33Mhz, 1 = 25Mhz */
Jeff Garzik85cd7252006-08-31 00:03:49 -0400428
Jeff Garzik669a5db2006-08-29 18:12:40 -0400429 if (optiplus_with_udma(dev))
Tejun Heo1626aeb2007-05-04 12:43:58 +0200430 ppi[0] = &info_82c700_udma;
Jeff Garzik669a5db2006-08-29 18:12:40 -0400431
Tejun Heo9363c382008-04-07 22:47:16 +0900432 return ata_pci_sff_init_one(dev, ppi, &optidma_sht, NULL);
Jeff Garzik669a5db2006-08-29 18:12:40 -0400433}
434
435static const struct pci_device_id optidma[] = {
Jeff Garzik2d2744f2006-09-28 20:21:59 -0400436 { PCI_VDEVICE(OPTI, 0xD568), }, /* Opti 82C700 */
437
438 { },
Jeff Garzik669a5db2006-08-29 18:12:40 -0400439};
440
441static struct pci_driver optidma_pci_driver = {
Jeff Garzik2d2744f2006-09-28 20:21:59 -0400442 .name = DRV_NAME,
Jeff Garzik669a5db2006-08-29 18:12:40 -0400443 .id_table = optidma,
444 .probe = optidma_init_one,
Alan30ced0f2006-11-22 16:57:36 +0000445 .remove = ata_pci_remove_one,
Tejun Heo438ac6d2007-03-02 17:31:26 +0900446#ifdef CONFIG_PM
Alan30ced0f2006-11-22 16:57:36 +0000447 .suspend = ata_pci_device_suspend,
448 .resume = ata_pci_device_resume,
Tejun Heo438ac6d2007-03-02 17:31:26 +0900449#endif
Jeff Garzik669a5db2006-08-29 18:12:40 -0400450};
451
452static int __init optidma_init(void)
453{
454 return pci_register_driver(&optidma_pci_driver);
455}
456
Jeff Garzik669a5db2006-08-29 18:12:40 -0400457static void __exit optidma_exit(void)
458{
459 pci_unregister_driver(&optidma_pci_driver);
460}
461
Jeff Garzik669a5db2006-08-29 18:12:40 -0400462MODULE_AUTHOR("Alan Cox");
463MODULE_DESCRIPTION("low-level driver for Opti Firestar/Firestar Plus");
464MODULE_LICENSE("GPL");
465MODULE_DEVICE_TABLE(pci, optidma);
466MODULE_VERSION(DRV_VERSION);
467
468module_init(optidma_init);
469module_exit(optidma_exit);