Colin Cross | 6659a74 | 2010-04-20 19:54:09 -0700 | [diff] [blame] | 1 | /* drivers/misc/akm8975.c - akm8975 compass driver |
| 2 | * |
| 3 | * Copyright (C) 2007-2008 HTC Corporation. |
| 4 | * Author: Hou-Kun Chen <houkun.chen@gmail.com> |
| 5 | * |
| 6 | * This software is licensed under the terms of the GNU General Public |
| 7 | * License version 2, as published by the Free Software Foundation, and |
| 8 | * may be copied, distributed, and modified under those terms. |
| 9 | * |
| 10 | * This program is distributed in the hope that it will be useful, |
| 11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 13 | * GNU General Public License for more details. |
| 14 | * |
| 15 | */ |
| 16 | |
| 17 | /* |
| 18 | * Revised by AKM 2009/04/02 |
| 19 | * Revised by Motorola 2010/05/27 |
| 20 | * |
| 21 | */ |
| 22 | |
| 23 | #include <linux/interrupt.h> |
| 24 | #include <linux/i2c.h> |
| 25 | #include <linux/slab.h> |
| 26 | #include <linux/irq.h> |
| 27 | #include <linux/miscdevice.h> |
| 28 | #include <linux/gpio.h> |
| 29 | #include <linux/uaccess.h> |
| 30 | #include <linux/delay.h> |
| 31 | #include <linux/input.h> |
| 32 | #include <linux/workqueue.h> |
| 33 | #include <linux/freezer.h> |
| 34 | #include <linux/akm8975.h> |
| 35 | #include <linux/earlysuspend.h> |
| 36 | |
| 37 | #define AK8975DRV_CALL_DBG 0 |
| 38 | #if AK8975DRV_CALL_DBG |
| 39 | #define FUNCDBG(msg) pr_err("%s:%s\n", __func__, msg); |
| 40 | #else |
| 41 | #define FUNCDBG(msg) |
| 42 | #endif |
| 43 | |
| 44 | #define AK8975DRV_DATA_DBG 0 |
| 45 | #define MAX_FAILURE_COUNT 10 |
| 46 | |
| 47 | struct akm8975_data { |
| 48 | struct i2c_client *this_client; |
| 49 | struct akm8975_platform_data *pdata; |
| 50 | struct input_dev *input_dev; |
| 51 | struct work_struct work; |
| 52 | struct mutex flags_lock; |
| 53 | #ifdef CONFIG_HAS_EARLYSUSPEND |
| 54 | struct early_suspend early_suspend; |
| 55 | #endif |
| 56 | }; |
| 57 | |
| 58 | /* |
| 59 | * Because misc devices can not carry a pointer from driver register to |
| 60 | * open, we keep this global. This limits the driver to a single instance. |
| 61 | */ |
| 62 | struct akm8975_data *akmd_data; |
| 63 | |
| 64 | static DECLARE_WAIT_QUEUE_HEAD(open_wq); |
| 65 | |
| 66 | static atomic_t open_flag; |
| 67 | |
| 68 | static short m_flag; |
| 69 | static short a_flag; |
| 70 | static short t_flag; |
| 71 | static short mv_flag; |
| 72 | |
| 73 | static short akmd_delay; |
| 74 | |
| 75 | static ssize_t akm8975_show(struct device *dev, struct device_attribute *attr, |
| 76 | char *buf) |
| 77 | { |
| 78 | struct i2c_client *client = to_i2c_client(dev); |
| 79 | return sprintf(buf, "%u\n", i2c_smbus_read_byte_data(client, |
| 80 | AK8975_REG_CNTL)); |
| 81 | } |
| 82 | static ssize_t akm8975_store(struct device *dev, struct device_attribute *attr, |
| 83 | const char *buf, size_t count) |
| 84 | { |
| 85 | struct i2c_client *client = to_i2c_client(dev); |
| 86 | unsigned long val; |
| 87 | strict_strtoul(buf, 10, &val); |
| 88 | if (val > 0xff) |
| 89 | return -EINVAL; |
| 90 | i2c_smbus_write_byte_data(client, AK8975_REG_CNTL, val); |
| 91 | return count; |
| 92 | } |
| 93 | static DEVICE_ATTR(akm_ms1, S_IWUSR | S_IRUGO, akm8975_show, akm8975_store); |
| 94 | |
| 95 | static int akm8975_i2c_rxdata(struct akm8975_data *akm, char *buf, int length) |
| 96 | { |
| 97 | struct i2c_msg msgs[] = { |
| 98 | { |
| 99 | .addr = akm->this_client->addr, |
| 100 | .flags = 0, |
| 101 | .len = 1, |
| 102 | .buf = buf, |
| 103 | }, |
| 104 | { |
| 105 | .addr = akm->this_client->addr, |
| 106 | .flags = I2C_M_RD, |
| 107 | .len = length, |
| 108 | .buf = buf, |
| 109 | }, |
| 110 | }; |
| 111 | |
| 112 | FUNCDBG("called"); |
| 113 | |
| 114 | if (i2c_transfer(akm->this_client->adapter, msgs, 2) < 0) { |
| 115 | pr_err("akm8975_i2c_rxdata: transfer error\n"); |
| 116 | return EIO; |
| 117 | } else |
| 118 | return 0; |
| 119 | } |
| 120 | |
| 121 | static int akm8975_i2c_txdata(struct akm8975_data *akm, char *buf, int length) |
| 122 | { |
| 123 | struct i2c_msg msgs[] = { |
| 124 | { |
| 125 | .addr = akm->this_client->addr, |
| 126 | .flags = 0, |
| 127 | .len = length, |
| 128 | .buf = buf, |
| 129 | }, |
| 130 | }; |
| 131 | |
| 132 | FUNCDBG("called"); |
| 133 | |
| 134 | if (i2c_transfer(akm->this_client->adapter, msgs, 1) < 0) { |
| 135 | pr_err("akm8975_i2c_txdata: transfer error\n"); |
| 136 | return -EIO; |
| 137 | } else |
| 138 | return 0; |
| 139 | } |
| 140 | |
| 141 | static void akm8975_ecs_report_value(struct akm8975_data *akm, short *rbuf) |
| 142 | { |
| 143 | struct akm8975_data *data = i2c_get_clientdata(akm->this_client); |
| 144 | |
| 145 | FUNCDBG("called"); |
| 146 | |
| 147 | #if AK8975DRV_DATA_DBG |
| 148 | pr_info("akm8975_ecs_report_value: yaw = %d, pitch = %d, roll = %d\n", |
| 149 | rbuf[0], rbuf[1], rbuf[2]); |
| 150 | pr_info("tmp = %d, m_stat= %d, g_stat=%d\n", rbuf[3], rbuf[4], rbuf[5]); |
| 151 | pr_info("Acceleration: x = %d LSB, y = %d LSB, z = %d LSB\n", |
| 152 | rbuf[6], rbuf[7], rbuf[8]); |
| 153 | pr_info("Magnetic: x = %d LSB, y = %d LSB, z = %d LSB\n\n", |
| 154 | rbuf[9], rbuf[10], rbuf[11]); |
| 155 | #endif |
| 156 | mutex_lock(&akm->flags_lock); |
| 157 | /* Report magnetic sensor information */ |
| 158 | if (m_flag) { |
| 159 | input_report_abs(data->input_dev, ABS_RX, rbuf[0]); |
| 160 | input_report_abs(data->input_dev, ABS_RY, rbuf[1]); |
| 161 | input_report_abs(data->input_dev, ABS_RZ, rbuf[2]); |
| 162 | input_report_abs(data->input_dev, ABS_RUDDER, rbuf[4]); |
| 163 | } |
| 164 | |
| 165 | /* Report acceleration sensor information */ |
| 166 | if (a_flag) { |
| 167 | input_report_abs(data->input_dev, ABS_X, rbuf[6]); |
| 168 | input_report_abs(data->input_dev, ABS_Y, rbuf[7]); |
| 169 | input_report_abs(data->input_dev, ABS_Z, rbuf[8]); |
| 170 | input_report_abs(data->input_dev, ABS_WHEEL, rbuf[5]); |
| 171 | } |
| 172 | |
| 173 | /* Report temperature information */ |
| 174 | if (t_flag) |
| 175 | input_report_abs(data->input_dev, ABS_THROTTLE, rbuf[3]); |
| 176 | |
| 177 | if (mv_flag) { |
| 178 | input_report_abs(data->input_dev, ABS_HAT0X, rbuf[9]); |
| 179 | input_report_abs(data->input_dev, ABS_HAT0Y, rbuf[10]); |
| 180 | input_report_abs(data->input_dev, ABS_BRAKE, rbuf[11]); |
| 181 | } |
| 182 | mutex_unlock(&akm->flags_lock); |
| 183 | |
| 184 | input_sync(data->input_dev); |
| 185 | } |
| 186 | |
| 187 | static void akm8975_ecs_close_done(struct akm8975_data *akm) |
| 188 | { |
| 189 | FUNCDBG("called"); |
| 190 | mutex_lock(&akm->flags_lock); |
| 191 | m_flag = 1; |
| 192 | a_flag = 1; |
| 193 | t_flag = 1; |
| 194 | mv_flag = 1; |
| 195 | mutex_unlock(&akm->flags_lock); |
| 196 | } |
| 197 | |
| 198 | static int akm_aot_open(struct inode *inode, struct file *file) |
| 199 | { |
| 200 | int ret = -1; |
| 201 | |
| 202 | FUNCDBG("called"); |
| 203 | if (atomic_cmpxchg(&open_flag, 0, 1) == 0) { |
| 204 | wake_up(&open_wq); |
| 205 | ret = 0; |
| 206 | } |
| 207 | |
| 208 | ret = nonseekable_open(inode, file); |
| 209 | if (ret) |
| 210 | return ret; |
| 211 | |
| 212 | file->private_data = akmd_data; |
| 213 | |
| 214 | return ret; |
| 215 | } |
| 216 | |
| 217 | static int akm_aot_release(struct inode *inode, struct file *file) |
| 218 | { |
| 219 | FUNCDBG("called"); |
| 220 | atomic_set(&open_flag, 0); |
| 221 | wake_up(&open_wq); |
| 222 | return 0; |
| 223 | } |
| 224 | |
| 225 | static int akm_aot_ioctl(struct inode *inode, struct file *file, |
| 226 | unsigned int cmd, unsigned long arg) |
| 227 | { |
| 228 | void __user *argp = (void __user *) arg; |
| 229 | short flag; |
| 230 | struct akm8975_data *akm = file->private_data; |
| 231 | |
| 232 | FUNCDBG("called"); |
| 233 | |
| 234 | switch (cmd) { |
| 235 | case ECS_IOCTL_APP_SET_MFLAG: |
| 236 | case ECS_IOCTL_APP_SET_AFLAG: |
| 237 | case ECS_IOCTL_APP_SET_MVFLAG: |
| 238 | if (copy_from_user(&flag, argp, sizeof(flag))) |
| 239 | return -EFAULT; |
| 240 | if (flag < 0 || flag > 1) |
| 241 | return -EINVAL; |
| 242 | break; |
| 243 | case ECS_IOCTL_APP_SET_DELAY: |
| 244 | if (copy_from_user(&flag, argp, sizeof(flag))) |
| 245 | return -EFAULT; |
| 246 | break; |
| 247 | default: |
| 248 | break; |
| 249 | } |
| 250 | |
| 251 | mutex_lock(&akm->flags_lock); |
| 252 | switch (cmd) { |
| 253 | case ECS_IOCTL_APP_SET_MFLAG: |
| 254 | m_flag = flag; |
| 255 | break; |
| 256 | case ECS_IOCTL_APP_GET_MFLAG: |
| 257 | flag = m_flag; |
| 258 | break; |
| 259 | case ECS_IOCTL_APP_SET_AFLAG: |
| 260 | a_flag = flag; |
| 261 | break; |
| 262 | case ECS_IOCTL_APP_GET_AFLAG: |
| 263 | flag = a_flag; |
| 264 | break; |
| 265 | case ECS_IOCTL_APP_SET_MVFLAG: |
| 266 | mv_flag = flag; |
| 267 | break; |
| 268 | case ECS_IOCTL_APP_GET_MVFLAG: |
| 269 | flag = mv_flag; |
| 270 | break; |
| 271 | case ECS_IOCTL_APP_SET_DELAY: |
| 272 | akmd_delay = flag; |
| 273 | break; |
| 274 | case ECS_IOCTL_APP_GET_DELAY: |
| 275 | flag = akmd_delay; |
| 276 | break; |
| 277 | default: |
| 278 | return -ENOTTY; |
| 279 | } |
| 280 | mutex_unlock(&akm->flags_lock); |
| 281 | |
| 282 | switch (cmd) { |
| 283 | case ECS_IOCTL_APP_GET_MFLAG: |
| 284 | case ECS_IOCTL_APP_GET_AFLAG: |
| 285 | case ECS_IOCTL_APP_GET_MVFLAG: |
| 286 | case ECS_IOCTL_APP_GET_DELAY: |
| 287 | if (copy_to_user(argp, &flag, sizeof(flag))) |
| 288 | return -EFAULT; |
| 289 | break; |
| 290 | default: |
| 291 | break; |
| 292 | } |
| 293 | |
| 294 | return 0; |
| 295 | } |
| 296 | |
| 297 | static int akmd_open(struct inode *inode, struct file *file) |
| 298 | { |
| 299 | int err = 0; |
| 300 | |
| 301 | FUNCDBG("called"); |
| 302 | err = nonseekable_open(inode, file); |
| 303 | if (err) |
| 304 | return err; |
| 305 | |
| 306 | file->private_data = akmd_data; |
| 307 | return 0; |
| 308 | } |
| 309 | |
| 310 | static int akmd_release(struct inode *inode, struct file *file) |
| 311 | { |
| 312 | struct akm8975_data *akm = file->private_data; |
| 313 | |
| 314 | FUNCDBG("called"); |
| 315 | akm8975_ecs_close_done(akm); |
| 316 | return 0; |
| 317 | } |
| 318 | |
| 319 | static int akmd_ioctl(struct inode *inode, struct file *file, unsigned int cmd, |
| 320 | unsigned long arg) |
| 321 | { |
| 322 | void __user *argp = (void __user *) arg; |
| 323 | |
| 324 | char rwbuf[16]; |
| 325 | int ret = -1; |
| 326 | int status; |
| 327 | short value[12]; |
| 328 | short delay; |
| 329 | struct akm8975_data *akm = file->private_data; |
| 330 | |
| 331 | FUNCDBG("called"); |
| 332 | |
| 333 | switch (cmd) { |
| 334 | case ECS_IOCTL_READ: |
| 335 | case ECS_IOCTL_WRITE: |
| 336 | if (copy_from_user(&rwbuf, argp, sizeof(rwbuf))) |
| 337 | return -EFAULT; |
| 338 | break; |
| 339 | |
| 340 | case ECS_IOCTL_SET_YPR: |
| 341 | if (copy_from_user(&value, argp, sizeof(value))) |
| 342 | return -EFAULT; |
| 343 | break; |
| 344 | |
| 345 | default: |
| 346 | break; |
| 347 | } |
| 348 | |
| 349 | switch (cmd) { |
| 350 | case ECS_IOCTL_READ: |
| 351 | if (rwbuf[0] < 1) |
| 352 | return -EINVAL; |
| 353 | |
| 354 | ret = akm8975_i2c_rxdata(akm, &rwbuf[1], rwbuf[0]); |
| 355 | if (ret < 0) |
| 356 | return ret; |
| 357 | break; |
| 358 | |
| 359 | case ECS_IOCTL_WRITE: |
| 360 | if (rwbuf[0] < 2) |
| 361 | return -EINVAL; |
| 362 | |
| 363 | ret = akm8975_i2c_txdata(akm, &rwbuf[1], rwbuf[0]); |
| 364 | if (ret < 0) |
| 365 | return ret; |
| 366 | break; |
| 367 | case ECS_IOCTL_SET_YPR: |
| 368 | akm8975_ecs_report_value(akm, value); |
| 369 | break; |
| 370 | |
| 371 | case ECS_IOCTL_GET_OPEN_STATUS: |
| 372 | wait_event_interruptible(open_wq, |
| 373 | (atomic_read(&open_flag) != 0)); |
| 374 | status = atomic_read(&open_flag); |
| 375 | break; |
| 376 | case ECS_IOCTL_GET_CLOSE_STATUS: |
| 377 | wait_event_interruptible(open_wq, |
| 378 | (atomic_read(&open_flag) == 0)); |
| 379 | status = atomic_read(&open_flag); |
| 380 | break; |
| 381 | |
| 382 | case ECS_IOCTL_GET_DELAY: |
| 383 | delay = akmd_delay; |
| 384 | break; |
| 385 | |
| 386 | default: |
| 387 | FUNCDBG("Unknown cmd\n"); |
| 388 | return -ENOTTY; |
| 389 | } |
| 390 | |
| 391 | switch (cmd) { |
| 392 | case ECS_IOCTL_READ: |
| 393 | if (copy_to_user(argp, &rwbuf, sizeof(rwbuf))) |
| 394 | return -EFAULT; |
| 395 | break; |
| 396 | case ECS_IOCTL_GET_OPEN_STATUS: |
| 397 | case ECS_IOCTL_GET_CLOSE_STATUS: |
| 398 | if (copy_to_user(argp, &status, sizeof(status))) |
| 399 | return -EFAULT; |
| 400 | break; |
| 401 | case ECS_IOCTL_GET_DELAY: |
| 402 | if (copy_to_user(argp, &delay, sizeof(delay))) |
| 403 | return -EFAULT; |
| 404 | break; |
| 405 | default: |
| 406 | break; |
| 407 | } |
| 408 | |
| 409 | return 0; |
| 410 | } |
| 411 | |
| 412 | /* needed to clear the int. pin */ |
| 413 | static void akm_work_func(struct work_struct *work) |
| 414 | { |
| 415 | struct akm8975_data *akm = |
| 416 | container_of(work, struct akm8975_data, work); |
| 417 | |
| 418 | FUNCDBG("called"); |
| 419 | enable_irq(akm->this_client->irq); |
| 420 | } |
| 421 | |
| 422 | static irqreturn_t akm8975_interrupt(int irq, void *dev_id) |
| 423 | { |
| 424 | struct akm8975_data *akm = dev_id; |
| 425 | FUNCDBG("called"); |
| 426 | |
| 427 | disable_irq_nosync(akm->this_client->irq); |
| 428 | schedule_work(&akm->work); |
| 429 | return IRQ_HANDLED; |
| 430 | } |
| 431 | |
| 432 | static int akm8975_power_off(struct akm8975_data *akm) |
| 433 | { |
| 434 | #if AK8975DRV_CALL_DBG |
| 435 | pr_info("%s\n", __func__); |
| 436 | #endif |
| 437 | if (akm->pdata->power_off) |
| 438 | akm->pdata->power_off(); |
| 439 | |
| 440 | return 0; |
| 441 | } |
| 442 | |
| 443 | static int akm8975_power_on(struct akm8975_data *akm) |
| 444 | { |
| 445 | int err; |
| 446 | |
| 447 | #if AK8975DRV_CALL_DBG |
| 448 | pr_info("%s\n", __func__); |
| 449 | #endif |
| 450 | if (akm->pdata->power_on) { |
| 451 | err = akm->pdata->power_on(); |
| 452 | if (err < 0) |
| 453 | return err; |
| 454 | } |
| 455 | return 0; |
| 456 | } |
| 457 | |
| 458 | static int akm8975_suspend(struct i2c_client *client, pm_message_t mesg) |
| 459 | { |
| 460 | struct akm8975_data *akm = i2c_get_clientdata(client); |
| 461 | |
| 462 | #if AK8975DRV_CALL_DBG |
| 463 | pr_info("%s\n", __func__); |
| 464 | #endif |
| 465 | /* TO DO: might need more work after power mgmt |
| 466 | is enabled */ |
| 467 | return akm8975_power_off(akm); |
| 468 | } |
| 469 | |
| 470 | static int akm8975_resume(struct i2c_client *client) |
| 471 | { |
| 472 | struct akm8975_data *akm = i2c_get_clientdata(client); |
| 473 | |
| 474 | #if AK8975DRV_CALL_DBG |
| 475 | pr_info("%s\n", __func__); |
| 476 | #endif |
| 477 | /* TO DO: might need more work after power mgmt |
| 478 | is enabled */ |
| 479 | return akm8975_power_on(akm); |
| 480 | } |
| 481 | |
| 482 | #ifdef CONFIG_HAS_EARLYSUSPEND |
| 483 | static void akm8975_early_suspend(struct early_suspend *handler) |
| 484 | { |
| 485 | struct akm8975_data *akm; |
| 486 | akm = container_of(handler, struct akm8975_data, early_suspend); |
| 487 | |
| 488 | #if AK8975DRV_CALL_DBG |
| 489 | pr_info("%s\n", __func__); |
| 490 | #endif |
| 491 | akm8975_suspend(akm->this_client, PMSG_SUSPEND); |
| 492 | } |
| 493 | |
| 494 | static void akm8975_early_resume(struct early_suspend *handler) |
| 495 | { |
| 496 | struct akm8975_data *akm; |
| 497 | akm = container_of(handler, struct akm8975_data, early_suspend); |
| 498 | |
| 499 | #if AK8975DRV_CALL_DBG |
| 500 | pr_info("%s\n", __func__); |
| 501 | #endif |
| 502 | akm8975_resume(akm->this_client); |
| 503 | } |
| 504 | #endif |
| 505 | |
| 506 | |
| 507 | static int akm8975_init_client(struct i2c_client *client) |
| 508 | { |
| 509 | struct akm8975_data *data; |
| 510 | int ret; |
| 511 | |
| 512 | data = i2c_get_clientdata(client); |
| 513 | |
| 514 | ret = request_irq(client->irq, akm8975_interrupt, IRQF_TRIGGER_RISING, |
| 515 | "akm8975", data); |
| 516 | |
| 517 | if (ret < 0) { |
| 518 | pr_err("akm8975_init_client: request irq failed\n"); |
| 519 | goto err; |
| 520 | } |
| 521 | |
| 522 | init_waitqueue_head(&open_wq); |
| 523 | |
| 524 | mutex_lock(&data->flags_lock); |
| 525 | m_flag = 1; |
| 526 | a_flag = 1; |
| 527 | t_flag = 1; |
| 528 | mv_flag = 1; |
| 529 | mutex_unlock(&data->flags_lock); |
| 530 | |
| 531 | return 0; |
| 532 | err: |
| 533 | return ret; |
| 534 | } |
| 535 | |
| 536 | static const struct file_operations akmd_fops = { |
| 537 | .owner = THIS_MODULE, |
| 538 | .open = akmd_open, |
| 539 | .release = akmd_release, |
| 540 | .ioctl = akmd_ioctl, |
| 541 | }; |
| 542 | |
| 543 | static const struct file_operations akm_aot_fops = { |
| 544 | .owner = THIS_MODULE, |
| 545 | .open = akm_aot_open, |
| 546 | .release = akm_aot_release, |
| 547 | .ioctl = akm_aot_ioctl, |
| 548 | }; |
| 549 | |
| 550 | static struct miscdevice akm_aot_device = { |
| 551 | .minor = MISC_DYNAMIC_MINOR, |
| 552 | .name = "akm8975_aot", |
| 553 | .fops = &akm_aot_fops, |
| 554 | }; |
| 555 | |
| 556 | static struct miscdevice akmd_device = { |
| 557 | .minor = MISC_DYNAMIC_MINOR, |
| 558 | .name = "akm8975_dev", |
| 559 | .fops = &akmd_fops, |
| 560 | }; |
| 561 | |
| 562 | int akm8975_probe(struct i2c_client *client, |
| 563 | const struct i2c_device_id *devid) |
| 564 | { |
| 565 | struct akm8975_data *akm; |
| 566 | int err; |
| 567 | FUNCDBG("called"); |
| 568 | |
| 569 | if (client->dev.platform_data == NULL) { |
| 570 | dev_err(&client->dev, "platform data is NULL. exiting.\n"); |
| 571 | err = -ENODEV; |
| 572 | goto exit_platform_data_null; |
| 573 | } |
| 574 | |
| 575 | if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { |
| 576 | dev_err(&client->dev, "platform data is NULL. exiting.\n"); |
| 577 | err = -ENODEV; |
| 578 | goto exit_check_functionality_failed; |
| 579 | } |
| 580 | |
| 581 | akm = kzalloc(sizeof(struct akm8975_data), GFP_KERNEL); |
| 582 | if (!akm) { |
| 583 | dev_err(&client->dev, |
| 584 | "failed to allocate memory for module data\n"); |
| 585 | err = -ENOMEM; |
| 586 | goto exit_alloc_data_failed; |
| 587 | } |
| 588 | |
| 589 | akm->pdata = client->dev.platform_data; |
| 590 | |
| 591 | mutex_init(&akm->flags_lock); |
| 592 | INIT_WORK(&akm->work, akm_work_func); |
| 593 | i2c_set_clientdata(client, akm); |
| 594 | |
| 595 | err = akm8975_power_on(akm); |
| 596 | if (err < 0) |
| 597 | goto exit_power_on_failed; |
| 598 | |
| 599 | akm8975_init_client(client); |
| 600 | akm->this_client = client; |
| 601 | akmd_data = akm; |
| 602 | |
| 603 | akm->input_dev = input_allocate_device(); |
| 604 | if (!akm->input_dev) { |
| 605 | err = -ENOMEM; |
| 606 | dev_err(&akm->this_client->dev, |
| 607 | "input device allocate failed\n"); |
| 608 | goto exit_input_dev_alloc_failed; |
| 609 | } |
| 610 | |
| 611 | set_bit(EV_ABS, akm->input_dev->evbit); |
| 612 | |
| 613 | /* yaw */ |
| 614 | input_set_abs_params(akm->input_dev, ABS_RX, 0, 23040, 0, 0); |
| 615 | /* pitch */ |
| 616 | input_set_abs_params(akm->input_dev, ABS_RY, -11520, 11520, 0, 0); |
| 617 | /* roll */ |
| 618 | input_set_abs_params(akm->input_dev, ABS_RZ, -5760, 5760, 0, 0); |
| 619 | /* x-axis acceleration */ |
| 620 | input_set_abs_params(akm->input_dev, ABS_X, -5760, 5760, 0, 0); |
| 621 | /* y-axis acceleration */ |
| 622 | input_set_abs_params(akm->input_dev, ABS_Y, -5760, 5760, 0, 0); |
| 623 | /* z-axis acceleration */ |
| 624 | input_set_abs_params(akm->input_dev, ABS_Z, -5760, 5760, 0, 0); |
| 625 | /* temparature */ |
| 626 | input_set_abs_params(akm->input_dev, ABS_THROTTLE, -30, 85, 0, 0); |
| 627 | /* status of magnetic sensor */ |
| 628 | input_set_abs_params(akm->input_dev, ABS_RUDDER, 0, 3, 0, 0); |
| 629 | /* status of acceleration sensor */ |
| 630 | input_set_abs_params(akm->input_dev, ABS_WHEEL, 0, 3, 0, 0); |
| 631 | /* x-axis of raw magnetic vector */ |
| 632 | input_set_abs_params(akm->input_dev, ABS_HAT0X, -20480, 20479, 0, 0); |
| 633 | /* y-axis of raw magnetic vector */ |
| 634 | input_set_abs_params(akm->input_dev, ABS_HAT0Y, -20480, 20479, 0, 0); |
| 635 | /* z-axis of raw magnetic vector */ |
| 636 | input_set_abs_params(akm->input_dev, ABS_BRAKE, -20480, 20479, 0, 0); |
| 637 | |
| 638 | akm->input_dev->name = "compass"; |
| 639 | |
| 640 | err = input_register_device(akm->input_dev); |
| 641 | if (err) { |
| 642 | pr_err("akm8975_probe: Unable to register input device: %s\n", |
| 643 | akm->input_dev->name); |
| 644 | goto exit_input_register_device_failed; |
| 645 | } |
| 646 | |
| 647 | err = misc_register(&akmd_device); |
| 648 | if (err) { |
| 649 | pr_err("akm8975_probe: akmd_device register failed\n"); |
| 650 | goto exit_misc_device_register_failed; |
| 651 | } |
| 652 | |
| 653 | err = misc_register(&akm_aot_device); |
| 654 | if (err) { |
| 655 | pr_err("akm8975_probe: akm_aot_device register failed\n"); |
| 656 | goto exit_misc_device_register_failed; |
| 657 | } |
| 658 | |
| 659 | err = device_create_file(&client->dev, &dev_attr_akm_ms1); |
| 660 | |
| 661 | #ifdef CONFIG_HAS_EARLYSUSPEND |
| 662 | akm->early_suspend.suspend = akm8975_early_suspend; |
| 663 | akm->early_suspend.resume = akm8975_early_resume; |
| 664 | register_early_suspend(&akm->early_suspend); |
| 665 | #endif |
| 666 | return 0; |
| 667 | |
| 668 | exit_misc_device_register_failed: |
| 669 | exit_input_register_device_failed: |
| 670 | input_free_device(akm->input_dev); |
| 671 | exit_input_dev_alloc_failed: |
| 672 | akm8975_power_off(akm); |
| 673 | exit_power_on_failed: |
| 674 | kfree(akm); |
| 675 | exit_alloc_data_failed: |
| 676 | exit_check_functionality_failed: |
| 677 | exit_platform_data_null: |
| 678 | return err; |
| 679 | } |
| 680 | |
| 681 | static int __devexit akm8975_remove(struct i2c_client *client) |
| 682 | { |
| 683 | struct akm8975_data *akm = i2c_get_clientdata(client); |
| 684 | FUNCDBG("called"); |
| 685 | free_irq(client->irq, NULL); |
| 686 | input_unregister_device(akm->input_dev); |
| 687 | misc_deregister(&akmd_device); |
| 688 | misc_deregister(&akm_aot_device); |
| 689 | akm8975_power_off(akm); |
| 690 | kfree(akm); |
| 691 | return 0; |
| 692 | } |
| 693 | |
| 694 | static const struct i2c_device_id akm8975_id[] = { |
| 695 | { "akm8975", 0 }, |
| 696 | { } |
| 697 | }; |
| 698 | |
| 699 | MODULE_DEVICE_TABLE(i2c, akm8975_id); |
| 700 | |
| 701 | static struct i2c_driver akm8975_driver = { |
| 702 | .probe = akm8975_probe, |
| 703 | .remove = akm8975_remove, |
| 704 | #ifndef CONFIG_HAS_EARLYSUSPEND |
| 705 | .resume = akm8975_resume, |
| 706 | .suspend = akm8975_suspend, |
| 707 | #endif |
| 708 | .id_table = akm8975_id, |
| 709 | .driver = { |
| 710 | .name = "akm8975", |
| 711 | }, |
| 712 | }; |
| 713 | |
| 714 | static int __init akm8975_init(void) |
| 715 | { |
| 716 | pr_info("AK8975 compass driver: init\n"); |
| 717 | FUNCDBG("AK8975 compass driver: init\n"); |
| 718 | return i2c_add_driver(&akm8975_driver); |
| 719 | } |
| 720 | |
| 721 | static void __exit akm8975_exit(void) |
| 722 | { |
| 723 | FUNCDBG("AK8975 compass driver: exit\n"); |
| 724 | i2c_del_driver(&akm8975_driver); |
| 725 | } |
| 726 | |
| 727 | module_init(akm8975_init); |
| 728 | module_exit(akm8975_exit); |
| 729 | |
| 730 | MODULE_AUTHOR("Hou-Kun Chen <hk_chen@htc.com>"); |
| 731 | MODULE_DESCRIPTION("AK8975 compass driver"); |
| 732 | MODULE_LICENSE("GPL"); |