| Rod Whitby | 3145d8a | 2006-01-04 17:17:11 +0000 | [diff] [blame^] | 1 | /* |
| 2 | * arch/arm/mach-ixp4xx/nas100d-pci.c |
| 3 | * |
| 4 | * NAS 100d board-level PCI initialization |
| 5 | * |
| 6 | * based on ixdp425-pci.c: |
| 7 | * Copyright (C) 2002 Intel Corporation. |
| 8 | * Copyright (C) 2003-2004 MontaVista Software, Inc. |
| 9 | * |
| 10 | * Maintainer: http://www.nslu2-linux.org/ |
| 11 | * |
| 12 | * This program is free software; you can redistribute it and/or modify |
| 13 | * it under the terms of the GNU General Public License version 2 as |
| 14 | * published by the Free Software Foundation. |
| 15 | * |
| 16 | */ |
| 17 | |
| 18 | #include <linux/config.h> |
| 19 | #include <linux/pci.h> |
| 20 | #include <linux/init.h> |
| 21 | |
| 22 | #include <asm/mach/pci.h> |
| 23 | #include <asm/mach-types.h> |
| 24 | |
| 25 | void __init nas100d_pci_preinit(void) |
| 26 | { |
| 27 | set_irq_type(IRQ_NAS100D_PCI_INTA, IRQT_LOW); |
| 28 | set_irq_type(IRQ_NAS100D_PCI_INTB, IRQT_LOW); |
| 29 | set_irq_type(IRQ_NAS100D_PCI_INTC, IRQT_LOW); |
| 30 | set_irq_type(IRQ_NAS100D_PCI_INTD, IRQT_LOW); |
| 31 | set_irq_type(IRQ_NAS100D_PCI_INTE, IRQT_LOW); |
| 32 | |
| 33 | gpio_line_isr_clear(NAS100D_PCI_INTA_PIN); |
| 34 | gpio_line_isr_clear(NAS100D_PCI_INTB_PIN); |
| 35 | gpio_line_isr_clear(NAS100D_PCI_INTC_PIN); |
| 36 | gpio_line_isr_clear(NAS100D_PCI_INTD_PIN); |
| 37 | gpio_line_isr_clear(NAS100D_PCI_INTE_PIN); |
| 38 | |
| 39 | ixp4xx_pci_preinit(); |
| 40 | } |
| 41 | |
| 42 | static int __init nas100d_map_irq(struct pci_dev *dev, u8 slot, u8 pin) |
| 43 | { |
| 44 | static int pci_irq_table[NAS100D_PCI_MAX_DEV][NAS100D_PCI_IRQ_LINES] = |
| 45 | { |
| 46 | { IRQ_NAS100D_PCI_INTA, -1, -1 }, |
| 47 | { IRQ_NAS100D_PCI_INTB, -1, -1 }, |
| 48 | { IRQ_NAS100D_PCI_INTC, IRQ_NAS100D_PCI_INTD, IRQ_NAS100D_PCI_INTE }, |
| 49 | }; |
| 50 | |
| 51 | int irq = -1; |
| 52 | |
| 53 | if (slot >= 1 && slot <= NAS100D_PCI_MAX_DEV && |
| 54 | pin >= 1 && pin <= NAS100D_PCI_IRQ_LINES) |
| 55 | irq = pci_irq_table[slot-1][pin-1]; |
| 56 | |
| 57 | return irq; |
| 58 | } |
| 59 | |
| 60 | struct hw_pci __initdata nas100d_pci = { |
| 61 | .nr_controllers = 1, |
| 62 | .preinit = nas100d_pci_preinit, |
| 63 | .swizzle = pci_std_swizzle, |
| 64 | .setup = ixp4xx_setup, |
| 65 | .scan = ixp4xx_scan_bus, |
| 66 | .map_irq = nas100d_map_irq, |
| 67 | }; |
| 68 | |
| 69 | int __init nas100d_pci_init(void) |
| 70 | { |
| 71 | if (machine_is_nas100d()) |
| 72 | pci_common_init(&nas100d_pci); |
| 73 | |
| 74 | return 0; |
| 75 | } |
| 76 | |
| 77 | subsys_initcall(nas100d_pci_init); |