blob: edd4c88ca7d8d1a68e88922bc8466200e59d6214 [file] [log] [blame]
Andy Fleming00db8182005-07-30 19:31:23 -04001/*
2 * include/linux/phy.h
3 *
4 * Framework and drivers for configuring and reading different PHYs
5 * Based on code in sungem_phy.c and gianfar_phy.c
6 *
7 * Author: Andy Fleming
8 *
9 * Copyright (c) 2004 Freescale Semiconductor, Inc.
10 *
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2 of the License, or (at your
14 * option) any later version.
15 *
16 */
17
18#ifndef __PHY_H
19#define __PHY_H
20
21#include <linux/spinlock.h>
22#include <linux/device.h>
Maciej W. Rozycki13df29f2006-10-03 16:18:28 +010023#include <linux/ethtool.h>
24#include <linux/mii.h>
25#include <linux/timer.h>
26#include <linux/workqueue.h>
Andy Fleming00db8182005-07-30 19:31:23 -040027
28#define PHY_BASIC_FEATURES (SUPPORTED_10baseT_Half | \
29 SUPPORTED_10baseT_Full | \
30 SUPPORTED_100baseT_Half | \
31 SUPPORTED_100baseT_Full | \
32 SUPPORTED_Autoneg | \
33 SUPPORTED_TP | \
34 SUPPORTED_MII)
35
36#define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \
37 SUPPORTED_1000baseT_Half | \
38 SUPPORTED_1000baseT_Full)
39
40/* Set phydev->irq to PHY_POLL if interrupts are not supported,
41 * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if
42 * the attached driver handles the interrupt
43 */
44#define PHY_POLL -1
45#define PHY_IGNORE_INTERRUPT -2
46
47#define PHY_HAS_INTERRUPT 0x00000001
48#define PHY_HAS_MAGICANEG 0x00000002
49
Andy Fleminge8a2b6a2006-12-01 12:01:06 -060050/* Interface Mode definitions */
51typedef enum {
52 PHY_INTERFACE_MODE_MII,
53 PHY_INTERFACE_MODE_GMII,
54 PHY_INTERFACE_MODE_SGMII,
55 PHY_INTERFACE_MODE_TBI,
56 PHY_INTERFACE_MODE_RMII,
57 PHY_INTERFACE_MODE_RGMII,
58 PHY_INTERFACE_MODE_RTBI
59} phy_interface_t;
60
Andy Fleming00db8182005-07-30 19:31:23 -040061#define MII_BUS_MAX 4
62
63
Andy Fleminge8a2b6a2006-12-01 12:01:06 -060064#define PHY_INIT_TIMEOUT 100000
Andy Fleming00db8182005-07-30 19:31:23 -040065#define PHY_STATE_TIME 1
66#define PHY_FORCE_TIMEOUT 10
67#define PHY_AN_TIMEOUT 10
68
Andy Fleminge8a2b6a2006-12-01 12:01:06 -060069#define PHY_MAX_ADDR 32
Andy Fleming00db8182005-07-30 19:31:23 -040070
Kumar Galaa4d00f12006-01-11 11:27:33 -080071/* Used when trying to connect to a specific phy (mii bus id:phy device id) */
72#define PHY_ID_FMT "%x:%02x"
73
Andy Fleming00db8182005-07-30 19:31:23 -040074/* The Bus class for PHYs. Devices which provide access to
75 * PHYs should register using this structure */
76struct mii_bus {
77 const char *name;
78 int id;
79 void *priv;
80 int (*read)(struct mii_bus *bus, int phy_id, int regnum);
81 int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val);
82 int (*reset)(struct mii_bus *bus);
83
84 /* A lock to ensure that only one thing can read/write
85 * the MDIO bus at a time */
86 spinlock_t mdio_lock;
87
88 struct device *dev;
89
90 /* list of all PHYs on bus */
91 struct phy_device *phy_map[PHY_MAX_ADDR];
92
Matt Porterf8964242005-11-02 16:13:06 -070093 /* Phy addresses to be ignored when probing */
94 u32 phy_mask;
95
Andy Fleming00db8182005-07-30 19:31:23 -040096 /* Pointer to an array of interrupts, each PHY's
97 * interrupt at the index matching its address */
98 int *irq;
99};
100
Andy Fleminge8a2b6a2006-12-01 12:01:06 -0600101#define PHY_INTERRUPT_DISABLED 0x0
102#define PHY_INTERRUPT_ENABLED 0x80000000
Andy Fleming00db8182005-07-30 19:31:23 -0400103
104/* PHY state machine states:
105 *
106 * DOWN: PHY device and driver are not ready for anything. probe
107 * should be called if and only if the PHY is in this state,
108 * given that the PHY device exists.
109 * - PHY driver probe function will, depending on the PHY, set
110 * the state to STARTING or READY
111 *
112 * STARTING: PHY device is coming up, and the ethernet driver is
113 * not ready. PHY drivers may set this in the probe function.
114 * If they do, they are responsible for making sure the state is
115 * eventually set to indicate whether the PHY is UP or READY,
116 * depending on the state when the PHY is done starting up.
117 * - PHY driver will set the state to READY
118 * - start will set the state to PENDING
119 *
120 * READY: PHY is ready to send and receive packets, but the
121 * controller is not. By default, PHYs which do not implement
122 * probe will be set to this state by phy_probe(). If the PHY
123 * driver knows the PHY is ready, and the PHY state is STARTING,
124 * then it sets this STATE.
125 * - start will set the state to UP
126 *
127 * PENDING: PHY device is coming up, but the ethernet driver is
128 * ready. phy_start will set this state if the PHY state is
129 * STARTING.
130 * - PHY driver will set the state to UP when the PHY is ready
131 *
132 * UP: The PHY and attached device are ready to do work.
133 * Interrupts should be started here.
134 * - timer moves to AN
135 *
136 * AN: The PHY is currently negotiating the link state. Link is
137 * therefore down for now. phy_timer will set this state when it
138 * detects the state is UP. config_aneg will set this state
139 * whenever called with phydev->autoneg set to AUTONEG_ENABLE.
140 * - If autonegotiation finishes, but there's no link, it sets
141 * the state to NOLINK.
142 * - If aneg finishes with link, it sets the state to RUNNING,
143 * and calls adjust_link
144 * - If autonegotiation did not finish after an arbitrary amount
145 * of time, autonegotiation should be tried again if the PHY
146 * supports "magic" autonegotiation (back to AN)
147 * - If it didn't finish, and no magic_aneg, move to FORCING.
148 *
149 * NOLINK: PHY is up, but not currently plugged in.
150 * - If the timer notes that the link comes back, we move to RUNNING
151 * - config_aneg moves to AN
152 * - phy_stop moves to HALTED
153 *
154 * FORCING: PHY is being configured with forced settings
155 * - if link is up, move to RUNNING
156 * - If link is down, we drop to the next highest setting, and
157 * retry (FORCING) after a timeout
158 * - phy_stop moves to HALTED
159 *
160 * RUNNING: PHY is currently up, running, and possibly sending
161 * and/or receiving packets
162 * - timer will set CHANGELINK if we're polling (this ensures the
163 * link state is polled every other cycle of this state machine,
164 * which makes it every other second)
165 * - irq will set CHANGELINK
166 * - config_aneg will set AN
167 * - phy_stop moves to HALTED
168 *
169 * CHANGELINK: PHY experienced a change in link state
170 * - timer moves to RUNNING if link
171 * - timer moves to NOLINK if the link is down
172 * - phy_stop moves to HALTED
173 *
174 * HALTED: PHY is up, but no polling or interrupts are done. Or
175 * PHY is in an error state.
176 *
177 * - phy_start moves to RESUMING
178 *
179 * RESUMING: PHY was halted, but now wants to run again.
180 * - If we are forcing, or aneg is done, timer moves to RUNNING
181 * - If aneg is not done, timer moves to AN
182 * - phy_stop moves to HALTED
183 */
184enum phy_state {
185 PHY_DOWN=0,
186 PHY_STARTING,
187 PHY_READY,
188 PHY_PENDING,
189 PHY_UP,
190 PHY_AN,
191 PHY_RUNNING,
192 PHY_NOLINK,
193 PHY_FORCING,
194 PHY_CHANGELINK,
195 PHY_HALTED,
196 PHY_RESUMING
197};
198
199/* phy_device: An instance of a PHY
200 *
201 * drv: Pointer to the driver for this PHY instance
202 * bus: Pointer to the bus this PHY is on
203 * dev: driver model device structure for this PHY
204 * phy_id: UID for this device found during discovery
205 * state: state of the PHY for management purposes
206 * dev_flags: Device-specific flags used by the PHY driver.
207 * addr: Bus address of PHY
208 * link_timeout: The number of timer firings to wait before the
209 * giving up on the current attempt at acquiring a link
210 * irq: IRQ number of the PHY's interrupt (-1 if none)
211 * phy_timer: The timer for handling the state machine
212 * phy_queue: A work_queue for the interrupt
213 * attached_dev: The attached enet driver's device instance ptr
214 * adjust_link: Callback for the enet controller to respond to
215 * changes in the link state.
216 * adjust_state: Callback for the enet driver to respond to
217 * changes in the state machine.
218 *
219 * speed, duplex, pause, supported, advertising, and
220 * autoneg are used like in mii_if_info
221 *
222 * interrupts currently only supports enabled or disabled,
223 * but could be changed in the future to support enabling
224 * and disabling specific interrupts
225 *
226 * Contains some infrastructure for polling and interrupt
227 * handling, as well as handling shifts in PHY hardware state
228 */
229struct phy_device {
230 /* Information about the PHY type */
231 /* And management functions */
232 struct phy_driver *drv;
233
234 struct mii_bus *bus;
235
236 struct device dev;
237
238 u32 phy_id;
239
240 enum phy_state state;
241
242 u32 dev_flags;
243
Andy Fleminge8a2b6a2006-12-01 12:01:06 -0600244 phy_interface_t interface;
245
Andy Fleming00db8182005-07-30 19:31:23 -0400246 /* Bus address of the PHY (0-32) */
247 int addr;
248
249 /* forced speed & duplex (no autoneg)
250 * partner speed & duplex & pause (autoneg)
251 */
252 int speed;
253 int duplex;
254 int pause;
255 int asym_pause;
256
257 /* The most recently read link state */
258 int link;
259
260 /* Enabled Interrupts */
261 u32 interrupts;
262
263 /* Union of PHY and Attached devices' supported modes */
264 /* See mii.h for more info */
265 u32 supported;
266 u32 advertising;
267
268 int autoneg;
269
270 int link_timeout;
271
272 /* Interrupt number for this PHY
273 * -1 means no interrupt */
274 int irq;
275
276 /* private data pointer */
277 /* For use by PHYs to maintain extra state */
278 void *priv;
279
280 /* Interrupt and Polling infrastructure */
281 struct work_struct phy_queue;
282 struct timer_list phy_timer;
283
284 spinlock_t lock;
285
286 struct net_device *attached_dev;
287
288 void (*adjust_link)(struct net_device *dev);
289
290 void (*adjust_state)(struct net_device *dev);
291};
292#define to_phy_device(d) container_of(d, struct phy_device, dev)
293
294/* struct phy_driver: Driver structure for a particular PHY type
295 *
296 * phy_id: The result of reading the UID registers of this PHY
297 * type, and ANDing them with the phy_id_mask. This driver
298 * only works for PHYs with IDs which match this field
299 * name: The friendly name of this PHY type
300 * phy_id_mask: Defines the important bits of the phy_id
301 * features: A list of features (speed, duplex, etc) supported
302 * by this PHY
303 * flags: A bitfield defining certain other features this PHY
304 * supports (like interrupts)
305 *
306 * The drivers must implement config_aneg and read_status. All
307 * other functions are optional. Note that none of these
308 * functions should be called from interrupt time. The goal is
309 * for the bus read/write functions to be able to block when the
310 * bus transaction is happening, and be freed up by an interrupt
311 * (The MPC85xx has this ability, though it is not currently
312 * supported in the driver).
313 */
314struct phy_driver {
315 u32 phy_id;
316 char *name;
317 unsigned int phy_id_mask;
318 u32 features;
319 u32 flags;
320
321 /* Called to initialize the PHY,
322 * including after a reset */
323 int (*config_init)(struct phy_device *phydev);
324
325 /* Called during discovery. Used to set
326 * up device-specific structures, if any */
327 int (*probe)(struct phy_device *phydev);
328
329 /* PHY Power Management */
330 int (*suspend)(struct phy_device *phydev);
331 int (*resume)(struct phy_device *phydev);
332
333 /* Configures the advertisement and resets
334 * autonegotiation if phydev->autoneg is on,
335 * forces the speed to the current settings in phydev
336 * if phydev->autoneg is off */
337 int (*config_aneg)(struct phy_device *phydev);
338
339 /* Determines the negotiated speed and duplex */
340 int (*read_status)(struct phy_device *phydev);
341
342 /* Clears any pending interrupts */
343 int (*ack_interrupt)(struct phy_device *phydev);
344
345 /* Enables or disables interrupts */
346 int (*config_intr)(struct phy_device *phydev);
347
348 /* Clears up any memory if needed */
349 void (*remove)(struct phy_device *phydev);
350
351 struct device_driver driver;
352};
353#define to_phy_driver(d) container_of(d, struct phy_driver, driver)
354
355int phy_read(struct phy_device *phydev, u16 regnum);
356int phy_write(struct phy_device *phydev, u16 regnum, u16 val);
357struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
358int phy_clear_interrupt(struct phy_device *phydev);
359int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
Andy Fleminge1393452005-08-24 18:46:21 -0500360struct phy_device * phy_attach(struct net_device *dev,
Andy Fleminge8a2b6a2006-12-01 12:01:06 -0600361 const char *phy_id, u32 flags, phy_interface_t interface);
Andy Fleminge1393452005-08-24 18:46:21 -0500362struct phy_device * phy_connect(struct net_device *dev, const char *phy_id,
Andy Fleminge8a2b6a2006-12-01 12:01:06 -0600363 void (*handler)(struct net_device *), u32 flags,
364 phy_interface_t interface);
Andy Fleminge1393452005-08-24 18:46:21 -0500365void phy_disconnect(struct phy_device *phydev);
366void phy_detach(struct phy_device *phydev);
367void phy_start(struct phy_device *phydev);
368void phy_stop(struct phy_device *phydev);
369int phy_start_aneg(struct phy_device *phydev);
370
371int mdiobus_register(struct mii_bus *bus);
372void mdiobus_unregister(struct mii_bus *bus);
373void phy_sanitize_settings(struct phy_device *phydev);
374int phy_stop_interrupts(struct phy_device *phydev);
Andy Fleming00db8182005-07-30 19:31:23 -0400375
376static inline int phy_read_status(struct phy_device *phydev) {
377 return phydev->drv->read_status(phydev);
378}
379
Andy Fleminge1393452005-08-24 18:46:21 -0500380int genphy_config_advert(struct phy_device *phydev);
Andy Fleming00db8182005-07-30 19:31:23 -0400381int genphy_setup_forced(struct phy_device *phydev);
382int genphy_restart_aneg(struct phy_device *phydev);
383int genphy_config_aneg(struct phy_device *phydev);
384int genphy_update_link(struct phy_device *phydev);
385int genphy_read_status(struct phy_device *phydev);
386void phy_driver_unregister(struct phy_driver *drv);
387int phy_driver_register(struct phy_driver *new_driver);
388void phy_prepare_link(struct phy_device *phydev,
389 void (*adjust_link)(struct net_device *));
390void phy_start_machine(struct phy_device *phydev,
391 void (*handler)(struct net_device *));
392void phy_stop_machine(struct phy_device *phydev);
393int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
394int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
395int phy_mii_ioctl(struct phy_device *phydev,
396 struct mii_ioctl_data *mii_data, int cmd);
Andy Fleminge1393452005-08-24 18:46:21 -0500397int phy_start_interrupts(struct phy_device *phydev);
398void phy_print_status(struct phy_device *phydev);
Vitaly Bordug11b0bac2006-08-14 23:00:29 -0700399struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id);
Andy Fleming00db8182005-07-30 19:31:23 -0400400
401extern struct bus_type mdio_bus_type;
Andy Fleming00db8182005-07-30 19:31:23 -0400402#endif /* __PHY_H */