blob: a5ced7e08cbfc05ca9417b8dd42fd61c624ed27c [file] [log] [blame]
Paul B Schroeder3f542972006-08-31 19:41:47 -05001/*
2 * This program is free software; you can redistribute it and/or modify
3 * it under the terms of the GNU General Public License as published by
4 * the Free Software Foundation; either version 2 of the License, or
5 * (at your option) any later version.
6 *
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
11 *
12 * You should have received a copy of the GNU General Public License
13 * along with this program; if not, write to the Free Software
14 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
15 *
16 * Clean ups from Moschip version and a few ioctl implementations by:
17 * Paul B Schroeder <pschroeder "at" uplogix "dot" com>
18 *
19 * Originally based on drivers/usb/serial/io_edgeport.c which is:
20 * Copyright (C) 2000 Inside Out Networks, All rights reserved.
21 * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com>
22 *
23 */
24
25#include <linux/kernel.h>
26#include <linux/errno.h>
27#include <linux/init.h>
28#include <linux/slab.h>
29#include <linux/tty.h>
30#include <linux/tty_driver.h>
31#include <linux/tty_flip.h>
32#include <linux/module.h>
33#include <linux/serial.h>
34#include <linux/usb.h>
35#include <linux/usb/serial.h>
36#include <asm/uaccess.h>
37
38/*
39 * Version Information
40 */
41#define DRIVER_VERSION "1.3.1"
42#define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver"
43
44/*
45 * 16C50 UART register defines
46 */
47
48#define LCR_BITS_5 0x00 /* 5 bits/char */
49#define LCR_BITS_6 0x01 /* 6 bits/char */
50#define LCR_BITS_7 0x02 /* 7 bits/char */
51#define LCR_BITS_8 0x03 /* 8 bits/char */
52#define LCR_BITS_MASK 0x03 /* Mask for bits/char field */
53
54#define LCR_STOP_1 0x00 /* 1 stop bit */
55#define LCR_STOP_1_5 0x04 /* 1.5 stop bits (if 5 bits/char) */
56#define LCR_STOP_2 0x04 /* 2 stop bits (if 6-8 bits/char) */
57#define LCR_STOP_MASK 0x04 /* Mask for stop bits field */
58
59#define LCR_PAR_NONE 0x00 /* No parity */
60#define LCR_PAR_ODD 0x08 /* Odd parity */
61#define LCR_PAR_EVEN 0x18 /* Even parity */
62#define LCR_PAR_MARK 0x28 /* Force parity bit to 1 */
63#define LCR_PAR_SPACE 0x38 /* Force parity bit to 0 */
64#define LCR_PAR_MASK 0x38 /* Mask for parity field */
65
66#define LCR_SET_BREAK 0x40 /* Set Break condition */
67#define LCR_DL_ENABLE 0x80 /* Enable access to divisor latch */
68
69#define MCR_DTR 0x01 /* Assert DTR */
70#define MCR_RTS 0x02 /* Assert RTS */
71#define MCR_OUT1 0x04 /* Loopback only: Sets state of RI */
72#define MCR_MASTER_IE 0x08 /* Enable interrupt outputs */
73#define MCR_LOOPBACK 0x10 /* Set internal (digital) loopback mode */
74#define MCR_XON_ANY 0x20 /* Enable any char to exit XOFF mode */
75
76#define MOS7840_MSR_CTS 0x10 /* Current state of CTS */
77#define MOS7840_MSR_DSR 0x20 /* Current state of DSR */
78#define MOS7840_MSR_RI 0x40 /* Current state of RI */
79#define MOS7840_MSR_CD 0x80 /* Current state of CD */
80
81/*
82 * Defines used for sending commands to port
83 */
84
85#define WAIT_FOR_EVER (HZ * 0 ) /* timeout urb is wait for ever */
86#define MOS_WDR_TIMEOUT (HZ * 5 ) /* default urb timeout */
87
88#define MOS_PORT1 0x0200
89#define MOS_PORT2 0x0300
90#define MOS_VENREG 0x0000
91#define MOS_MAX_PORT 0x02
92#define MOS_WRITE 0x0E
93#define MOS_READ 0x0D
94
95/* Requests */
96#define MCS_RD_RTYPE 0xC0
97#define MCS_WR_RTYPE 0x40
98#define MCS_RDREQ 0x0D
99#define MCS_WRREQ 0x0E
100#define MCS_CTRL_TIMEOUT 500
101#define VENDOR_READ_LENGTH (0x01)
102
103#define MAX_NAME_LEN 64
104
105#define ZLP_REG1 0x3A //Zero_Flag_Reg1 58
106#define ZLP_REG5 0x3E //Zero_Flag_Reg5 62
107
108/* For higher baud Rates use TIOCEXBAUD */
109#define TIOCEXBAUD 0x5462
110
111/* vendor id and device id defines */
112
113#define USB_VENDOR_ID_MOSCHIP 0x9710
114#define MOSCHIP_DEVICE_ID_7840 0x7840
115#define MOSCHIP_DEVICE_ID_7820 0x7820
116
117/* Interrupt Rotinue Defines */
118
119#define SERIAL_IIR_RLS 0x06
120#define SERIAL_IIR_MS 0x00
121
122/*
123 * Emulation of the bit mask on the LINE STATUS REGISTER.
124 */
125#define SERIAL_LSR_DR 0x0001
126#define SERIAL_LSR_OE 0x0002
127#define SERIAL_LSR_PE 0x0004
128#define SERIAL_LSR_FE 0x0008
129#define SERIAL_LSR_BI 0x0010
130
131#define MOS_MSR_DELTA_CTS 0x10
132#define MOS_MSR_DELTA_DSR 0x20
133#define MOS_MSR_DELTA_RI 0x40
134#define MOS_MSR_DELTA_CD 0x80
135
136// Serial Port register Address
137#define INTERRUPT_ENABLE_REGISTER ((__u16)(0x01))
138#define FIFO_CONTROL_REGISTER ((__u16)(0x02))
139#define LINE_CONTROL_REGISTER ((__u16)(0x03))
140#define MODEM_CONTROL_REGISTER ((__u16)(0x04))
141#define LINE_STATUS_REGISTER ((__u16)(0x05))
142#define MODEM_STATUS_REGISTER ((__u16)(0x06))
143#define SCRATCH_PAD_REGISTER ((__u16)(0x07))
144#define DIVISOR_LATCH_LSB ((__u16)(0x00))
145#define DIVISOR_LATCH_MSB ((__u16)(0x01))
146
147#define CLK_MULTI_REGISTER ((__u16)(0x02))
148#define CLK_START_VALUE_REGISTER ((__u16)(0x03))
149
150#define SERIAL_LCR_DLAB ((__u16)(0x0080))
151
152/*
153 * URB POOL related defines
154 */
155#define NUM_URBS 16 /* URB Count */
156#define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */
157
158
159static struct usb_device_id moschip_port_id_table[] = {
160 {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
161 {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
162 {} /* terminating entry */
163};
164
165static __devinitdata struct usb_device_id moschip_id_table_combined[] = {
166 {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
167 {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
168 {} /* terminating entry */
169};
170
171MODULE_DEVICE_TABLE(usb, moschip_id_table_combined);
172
173/* This structure holds all of the local port information */
174
175struct moschip_port {
176 int port_num; /*Actual port number in the device(1,2,etc) */
177 struct urb *write_urb; /* write URB for this port */
178 struct urb *read_urb; /* read URB for this port */
Oliver Neukum0de9a702007-03-16 20:28:28 +0100179 struct urb *int_urb;
Paul B Schroeder3f542972006-08-31 19:41:47 -0500180 __u8 shadowLCR; /* last LCR value received */
181 __u8 shadowMCR; /* last MCR value received */
182 char open;
Oliver Neukum0de9a702007-03-16 20:28:28 +0100183 char open_ports;
184 char zombie;
Paul B Schroeder3f542972006-08-31 19:41:47 -0500185 wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */
186 wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */
187 int delta_msr_cond;
188 struct async_icount icount;
189 struct usb_serial_port *port; /* loop back to the owner of this object */
190
191 /*Offsets */
192 __u8 SpRegOffset;
193 __u8 ControlRegOffset;
194 __u8 DcrRegOffset;
195 //for processing control URBS in interrupt context
196 struct urb *control_urb;
Oliver Neukum0de9a702007-03-16 20:28:28 +0100197 struct usb_ctrlrequest *dr;
Paul B Schroeder3f542972006-08-31 19:41:47 -0500198 char *ctrl_buf;
199 int MsrLsr;
200
Oliver Neukum0de9a702007-03-16 20:28:28 +0100201 spinlock_t pool_lock;
Paul B Schroeder3f542972006-08-31 19:41:47 -0500202 struct urb *write_urb_pool[NUM_URBS];
Oliver Neukum0de9a702007-03-16 20:28:28 +0100203 char busy[NUM_URBS];
Paul B Schroeder3f542972006-08-31 19:41:47 -0500204};
205
206
207static int debug;
Paul B Schroeder3f542972006-08-31 19:41:47 -0500208
209/*
210 * mos7840_set_reg_sync
211 * To set the Control register by calling usb_fill_control_urb function
212 * by passing usb_sndctrlpipe function as parameter.
213 */
214
215static int mos7840_set_reg_sync(struct usb_serial_port *port, __u16 reg,
216 __u16 val)
217{
218 struct usb_device *dev = port->serial->dev;
219 val = val & 0x00ff;
220 dbg("mos7840_set_reg_sync offset is %x, value %x\n", reg, val);
221
222 return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
223 MCS_WR_RTYPE, val, reg, NULL, 0,
224 MOS_WDR_TIMEOUT);
225}
226
227/*
228 * mos7840_get_reg_sync
229 * To set the Uart register by calling usb_fill_control_urb function by
230 * passing usb_rcvctrlpipe function as parameter.
231 */
232
233static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg,
234 __u16 * val)
235{
236 struct usb_device *dev = port->serial->dev;
237 int ret = 0;
238
239 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
240 MCS_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH,
241 MOS_WDR_TIMEOUT);
242 dbg("mos7840_get_reg_sync offset is %x, return val %x\n", reg, *val);
243 *val = (*val) & 0x00ff;
244 return ret;
245}
246
247/*
248 * mos7840_set_uart_reg
249 * To set the Uart register by calling usb_fill_control_urb function by
250 * passing usb_sndctrlpipe function as parameter.
251 */
252
253static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg,
254 __u16 val)
255{
256
257 struct usb_device *dev = port->serial->dev;
258 val = val & 0x00ff;
259 // For the UART control registers, the application number need to be Or'ed
Oliver Neukum0de9a702007-03-16 20:28:28 +0100260 if (port->serial->num_ports == 4) {
Paul B Schroeder3f542972006-08-31 19:41:47 -0500261 val |=
262 (((__u16) port->number - (__u16) (port->serial->minor)) +
263 1) << 8;
264 dbg("mos7840_set_uart_reg application number is %x\n", val);
265 } else {
266 if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
267 val |=
268 (((__u16) port->number -
269 (__u16) (port->serial->minor)) + 1) << 8;
270 dbg("mos7840_set_uart_reg application number is %x\n",
271 val);
272 } else {
273 val |=
274 (((__u16) port->number -
275 (__u16) (port->serial->minor)) + 2) << 8;
276 dbg("mos7840_set_uart_reg application number is %x\n",
277 val);
278 }
279 }
280 return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
281 MCS_WR_RTYPE, val, reg, NULL, 0,
282 MOS_WDR_TIMEOUT);
283
284}
285
286/*
287 * mos7840_get_uart_reg
288 * To set the Control register by calling usb_fill_control_urb function
289 * by passing usb_rcvctrlpipe function as parameter.
290 */
291static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
292 __u16 * val)
293{
294 struct usb_device *dev = port->serial->dev;
295 int ret = 0;
296 __u16 Wval;
297
298 //dbg("application number is %4x \n",(((__u16)port->number - (__u16)(port->serial->minor))+1)<<8);
299 /*Wval is same as application number */
Oliver Neukum0de9a702007-03-16 20:28:28 +0100300 if (port->serial->num_ports == 4) {
Paul B Schroeder3f542972006-08-31 19:41:47 -0500301 Wval =
302 (((__u16) port->number - (__u16) (port->serial->minor)) +
303 1) << 8;
304 dbg("mos7840_get_uart_reg application number is %x\n", Wval);
305 } else {
306 if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
307 Wval =
308 (((__u16) port->number -
309 (__u16) (port->serial->minor)) + 1) << 8;
310 dbg("mos7840_get_uart_reg application number is %x\n",
311 Wval);
312 } else {
313 Wval =
314 (((__u16) port->number -
315 (__u16) (port->serial->minor)) + 2) << 8;
316 dbg("mos7840_get_uart_reg application number is %x\n",
317 Wval);
318 }
319 }
320 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
321 MCS_RD_RTYPE, Wval, reg, val, VENDOR_READ_LENGTH,
322 MOS_WDR_TIMEOUT);
323 *val = (*val) & 0x00ff;
324 return ret;
325}
326
327static void mos7840_dump_serial_port(struct moschip_port *mos7840_port)
328{
329
330 dbg("***************************************\n");
331 dbg("SpRegOffset is %2x\n", mos7840_port->SpRegOffset);
332 dbg("ControlRegOffset is %2x \n", mos7840_port->ControlRegOffset);
333 dbg("DCRRegOffset is %2x \n", mos7840_port->DcrRegOffset);
334 dbg("***************************************\n");
335
336}
337
338/************************************************************************/
339/************************************************************************/
340/* I N T E R F A C E F U N C T I O N S */
341/* I N T E R F A C E F U N C T I O N S */
342/************************************************************************/
343/************************************************************************/
344
345static inline void mos7840_set_port_private(struct usb_serial_port *port,
346 struct moschip_port *data)
347{
348 usb_set_serial_port_data(port, (void *)data);
349}
350
351static inline struct moschip_port *mos7840_get_port_private(struct
352 usb_serial_port
353 *port)
354{
355 return (struct moschip_port *)usb_get_serial_port_data(port);
356}
357
Oliver Neukum0de9a702007-03-16 20:28:28 +0100358static void mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr)
Paul B Schroeder3f542972006-08-31 19:41:47 -0500359{
360 struct moschip_port *mos7840_port;
361 struct async_icount *icount;
362 mos7840_port = port;
363 icount = &mos7840_port->icount;
364 if (new_msr &
365 (MOS_MSR_DELTA_CTS | MOS_MSR_DELTA_DSR | MOS_MSR_DELTA_RI |
366 MOS_MSR_DELTA_CD)) {
367 icount = &mos7840_port->icount;
368
369 /* update input line counters */
370 if (new_msr & MOS_MSR_DELTA_CTS) {
371 icount->cts++;
Oliver Neukum0de9a702007-03-16 20:28:28 +0100372 smp_wmb();
Paul B Schroeder3f542972006-08-31 19:41:47 -0500373 }
374 if (new_msr & MOS_MSR_DELTA_DSR) {
375 icount->dsr++;
Oliver Neukum0de9a702007-03-16 20:28:28 +0100376 smp_wmb();
Paul B Schroeder3f542972006-08-31 19:41:47 -0500377 }
378 if (new_msr & MOS_MSR_DELTA_CD) {
379 icount->dcd++;
Oliver Neukum0de9a702007-03-16 20:28:28 +0100380 smp_wmb();
Paul B Schroeder3f542972006-08-31 19:41:47 -0500381 }
382 if (new_msr & MOS_MSR_DELTA_RI) {
383 icount->rng++;
Oliver Neukum0de9a702007-03-16 20:28:28 +0100384 smp_wmb();
Paul B Schroeder3f542972006-08-31 19:41:47 -0500385 }
386 }
Paul B Schroeder3f542972006-08-31 19:41:47 -0500387}
388
Oliver Neukum0de9a702007-03-16 20:28:28 +0100389static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr)
Paul B Schroeder3f542972006-08-31 19:41:47 -0500390{
391 struct async_icount *icount;
392
393 dbg("%s - %02x", __FUNCTION__, new_lsr);
394
395 if (new_lsr & SERIAL_LSR_BI) {
396 //
397 // Parity and Framing errors only count if they
398 // occur exclusive of a break being
399 // received.
400 //
401 new_lsr &= (__u8) (SERIAL_LSR_OE | SERIAL_LSR_BI);
402 }
403
404 /* update input line counters */
405 icount = &port->icount;
406 if (new_lsr & SERIAL_LSR_BI) {
407 icount->brk++;
Oliver Neukum0de9a702007-03-16 20:28:28 +0100408 smp_wmb();
Paul B Schroeder3f542972006-08-31 19:41:47 -0500409 }
410 if (new_lsr & SERIAL_LSR_OE) {
411 icount->overrun++;
Oliver Neukum0de9a702007-03-16 20:28:28 +0100412 smp_wmb();
Paul B Schroeder3f542972006-08-31 19:41:47 -0500413 }
414 if (new_lsr & SERIAL_LSR_PE) {
415 icount->parity++;
Oliver Neukum0de9a702007-03-16 20:28:28 +0100416 smp_wmb();
Paul B Schroeder3f542972006-08-31 19:41:47 -0500417 }
418 if (new_lsr & SERIAL_LSR_FE) {
419 icount->frame++;
Oliver Neukum0de9a702007-03-16 20:28:28 +0100420 smp_wmb();
Paul B Schroeder3f542972006-08-31 19:41:47 -0500421 }
Paul B Schroeder3f542972006-08-31 19:41:47 -0500422}
423
424/************************************************************************/
425/************************************************************************/
426/* U S B C A L L B A C K F U N C T I O N S */
427/* U S B C A L L B A C K F U N C T I O N S */
428/************************************************************************/
429/************************************************************************/
430
David Howells7d12e782006-10-05 14:55:46 +0100431static void mos7840_control_callback(struct urb *urb)
Paul B Schroeder3f542972006-08-31 19:41:47 -0500432{
433 unsigned char *data;
434 struct moschip_port *mos7840_port;
435 __u8 regval = 0x0;
Oliver Neukum0de9a702007-03-16 20:28:28 +0100436 int result = 0;
Greg Kroah-Hartman0643c722007-06-15 15:44:13 -0700437 int status = urb->status;
Paul B Schroeder3f542972006-08-31 19:41:47 -0500438
Oliver Neukum0de9a702007-03-16 20:28:28 +0100439 mos7840_port = (struct moschip_port *)urb->context;
440
Greg Kroah-Hartman0643c722007-06-15 15:44:13 -0700441 switch (status) {
Paul B Schroeder3f542972006-08-31 19:41:47 -0500442 case 0:
443 /* success */
444 break;
445 case -ECONNRESET:
446 case -ENOENT:
447 case -ESHUTDOWN:
448 /* this urb is terminated, clean up */
449 dbg("%s - urb shutting down with status: %d", __FUNCTION__,
Greg Kroah-Hartman0643c722007-06-15 15:44:13 -0700450 status);
Paul B Schroeder3f542972006-08-31 19:41:47 -0500451 return;
452 default:
453 dbg("%s - nonzero urb status received: %d", __FUNCTION__,
Greg Kroah-Hartman0643c722007-06-15 15:44:13 -0700454 status);
Paul B Schroeder3f542972006-08-31 19:41:47 -0500455 goto exit;
456 }
457
Paul B Schroeder3f542972006-08-31 19:41:47 -0500458 dbg("%s urb buffer size is %d\n", __FUNCTION__, urb->actual_length);
459 dbg("%s mos7840_port->MsrLsr is %d port %d\n", __FUNCTION__,
460 mos7840_port->MsrLsr, mos7840_port->port_num);
461 data = urb->transfer_buffer;
462 regval = (__u8) data[0];
463 dbg("%s data is %x\n", __FUNCTION__, regval);
464 if (mos7840_port->MsrLsr == 0)
465 mos7840_handle_new_msr(mos7840_port, regval);
466 else if (mos7840_port->MsrLsr == 1)
467 mos7840_handle_new_lsr(mos7840_port, regval);
468
Oliver Neukum0de9a702007-03-16 20:28:28 +0100469exit:
470 spin_lock(&mos7840_port->pool_lock);
471 if (!mos7840_port->zombie)
472 result = usb_submit_urb(mos7840_port->int_urb, GFP_ATOMIC);
473 spin_unlock(&mos7840_port->pool_lock);
474 if (result) {
475 dev_err(&urb->dev->dev,
476 "%s - Error %d submitting interrupt urb\n",
477 __FUNCTION__, result);
478 }
Paul B Schroeder3f542972006-08-31 19:41:47 -0500479}
480
481static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
482 __u16 * val)
483{
484 struct usb_device *dev = mcs->port->serial->dev;
Oliver Neukum0de9a702007-03-16 20:28:28 +0100485 struct usb_ctrlrequest *dr = mcs->dr;
486 unsigned char *buffer = mcs->ctrl_buf;
487 int ret;
Paul B Schroeder3f542972006-08-31 19:41:47 -0500488
Paul B Schroeder3f542972006-08-31 19:41:47 -0500489 dr->bRequestType = MCS_RD_RTYPE;
490 dr->bRequest = MCS_RDREQ;
491 dr->wValue = cpu_to_le16(Wval); //0;
492 dr->wIndex = cpu_to_le16(reg);
493 dr->wLength = cpu_to_le16(2);
494
495 usb_fill_control_urb(mcs->control_urb, dev, usb_rcvctrlpipe(dev, 0),
496 (unsigned char *)dr, buffer, 2,
497 mos7840_control_callback, mcs);
498 mcs->control_urb->transfer_buffer_length = 2;
499 ret = usb_submit_urb(mcs->control_urb, GFP_ATOMIC);
500 return ret;
501}
502
503/*****************************************************************************
504 * mos7840_interrupt_callback
505 * this is the callback function for when we have received data on the
506 * interrupt endpoint.
507 *****************************************************************************/
508
David Howells7d12e782006-10-05 14:55:46 +0100509static void mos7840_interrupt_callback(struct urb *urb)
Paul B Schroeder3f542972006-08-31 19:41:47 -0500510{
511 int result;
512 int length;
513 struct moschip_port *mos7840_port;
514 struct usb_serial *serial;
515 __u16 Data;
516 unsigned char *data;
517 __u8 sp[5], st;
Oliver Neukum0de9a702007-03-16 20:28:28 +0100518 int i, rv = 0;
519 __u16 wval, wreg = 0;
Greg Kroah-Hartman0643c722007-06-15 15:44:13 -0700520 int status = urb->status;
Paul B Schroeder3f542972006-08-31 19:41:47 -0500521
522 dbg("%s", " : Entering\n");
Paul B Schroeder3f542972006-08-31 19:41:47 -0500523
Greg Kroah-Hartman0643c722007-06-15 15:44:13 -0700524 switch (status) {
Paul B Schroeder3f542972006-08-31 19:41:47 -0500525 case 0:
526 /* success */
527 break;
528 case -ECONNRESET:
529 case -ENOENT:
530 case -ESHUTDOWN:
531 /* this urb is terminated, clean up */
532 dbg("%s - urb shutting down with status: %d", __FUNCTION__,
Greg Kroah-Hartman0643c722007-06-15 15:44:13 -0700533 status);
Paul B Schroeder3f542972006-08-31 19:41:47 -0500534 return;
535 default:
536 dbg("%s - nonzero urb status received: %d", __FUNCTION__,
Greg Kroah-Hartman0643c722007-06-15 15:44:13 -0700537 status);
Paul B Schroeder3f542972006-08-31 19:41:47 -0500538 goto exit;
539 }
540
541 length = urb->actual_length;
542 data = urb->transfer_buffer;
543
544 serial = (struct usb_serial *)urb->context;
545
546 /* Moschip get 5 bytes
547 * Byte 1 IIR Port 1 (port.number is 0)
548 * Byte 2 IIR Port 2 (port.number is 1)
549 * Byte 3 IIR Port 3 (port.number is 2)
550 * Byte 4 IIR Port 4 (port.number is 3)
551 * Byte 5 FIFO status for both */
552
553 if (length && length > 5) {
554 dbg("%s \n", "Wrong data !!!");
555 return;
556 }
557
558 sp[0] = (__u8) data[0];
559 sp[1] = (__u8) data[1];
560 sp[2] = (__u8) data[2];
561 sp[3] = (__u8) data[3];
562 st = (__u8) data[4];
563
564 for (i = 0; i < serial->num_ports; i++) {
565 mos7840_port = mos7840_get_port_private(serial->port[i]);
566 wval =
567 (((__u16) serial->port[i]->number -
568 (__u16) (serial->minor)) + 1) << 8;
569 if (mos7840_port->open) {
570 if (sp[i] & 0x01) {
571 dbg("SP%d No Interrupt !!!\n", i);
572 } else {
573 switch (sp[i] & 0x0f) {
574 case SERIAL_IIR_RLS:
575 dbg("Serial Port %d: Receiver status error or ", i);
576 dbg("address bit detected in 9-bit mode\n");
577 mos7840_port->MsrLsr = 1;
Oliver Neukum0de9a702007-03-16 20:28:28 +0100578 wreg = LINE_STATUS_REGISTER;
Paul B Schroeder3f542972006-08-31 19:41:47 -0500579 break;
580 case SERIAL_IIR_MS:
581 dbg("Serial Port %d: Modem status change\n", i);
582 mos7840_port->MsrLsr = 0;
Oliver Neukum0de9a702007-03-16 20:28:28 +0100583 wreg = MODEM_STATUS_REGISTER;
Paul B Schroeder3f542972006-08-31 19:41:47 -0500584 break;
585 }
Oliver Neukum0de9a702007-03-16 20:28:28 +0100586 spin_lock(&mos7840_port->pool_lock);
587 if (!mos7840_port->zombie) {
588 rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data);
589 } else {
590 spin_unlock(&mos7840_port->pool_lock);
591 return;
592 }
593 spin_unlock(&mos7840_port->pool_lock);
Paul B Schroeder3f542972006-08-31 19:41:47 -0500594 }
595 }
596 }
Oliver Neukum0de9a702007-03-16 20:28:28 +0100597 if (!(rv < 0)) /* the completion handler for the control urb will resubmit */
598 return;
599exit:
Paul B Schroeder3f542972006-08-31 19:41:47 -0500600 result = usb_submit_urb(urb, GFP_ATOMIC);
601 if (result) {
602 dev_err(&urb->dev->dev,
603 "%s - Error %d submitting interrupt urb\n",
604 __FUNCTION__, result);
605 }
Paul B Schroeder3f542972006-08-31 19:41:47 -0500606}
607
608static int mos7840_port_paranoia_check(struct usb_serial_port *port,
609 const char *function)
610{
611 if (!port) {
612 dbg("%s - port == NULL", function);
613 return -1;
614 }
615 if (!port->serial) {
616 dbg("%s - port->serial == NULL", function);
617 return -1;
618 }
619
620 return 0;
621}
622
623/* Inline functions to check the sanity of a pointer that is passed to us */
624static int mos7840_serial_paranoia_check(struct usb_serial *serial,
625 const char *function)
626{
627 if (!serial) {
628 dbg("%s - serial == NULL", function);
629 return -1;
630 }
631 if (!serial->type) {
632 dbg("%s - serial->type == NULL!", function);
633 return -1;
634 }
635
636 return 0;
637}
638
639static struct usb_serial *mos7840_get_usb_serial(struct usb_serial_port *port,
640 const char *function)
641{
642 /* if no port was specified, or it fails a paranoia check */
643 if (!port ||
644 mos7840_port_paranoia_check(port, function) ||
645 mos7840_serial_paranoia_check(port->serial, function)) {
Oliver Neukum0de9a702007-03-16 20:28:28 +0100646 /* then say that we don't have a valid usb_serial thing, which will
647 * end up genrating -ENODEV return values */
Paul B Schroeder3f542972006-08-31 19:41:47 -0500648 return NULL;
649 }
650
651 return port->serial;
652}
653
654/*****************************************************************************
655 * mos7840_bulk_in_callback
656 * this is the callback function for when we have received data on the
657 * bulk in endpoint.
658 *****************************************************************************/
659
David Howells7d12e782006-10-05 14:55:46 +0100660static void mos7840_bulk_in_callback(struct urb *urb)
Paul B Schroeder3f542972006-08-31 19:41:47 -0500661{
Greg Kroah-Hartman0643c722007-06-15 15:44:13 -0700662 int retval;
Paul B Schroeder3f542972006-08-31 19:41:47 -0500663 unsigned char *data;
664 struct usb_serial *serial;
665 struct usb_serial_port *port;
666 struct moschip_port *mos7840_port;
667 struct tty_struct *tty;
Greg Kroah-Hartman0643c722007-06-15 15:44:13 -0700668 int status = urb->status;
Paul B Schroeder3f542972006-08-31 19:41:47 -0500669
Greg Kroah-Hartman0643c722007-06-15 15:44:13 -0700670 if (status) {
671 dbg("nonzero read bulk status received: %d", status);
Paul B Schroeder3f542972006-08-31 19:41:47 -0500672 return;
673 }
674
675 mos7840_port = (struct moschip_port *)urb->context;
676 if (!mos7840_port) {
677 dbg("%s", "NULL mos7840_port pointer \n");
678 return;
679 }
680
681 port = (struct usb_serial_port *)mos7840_port->port;
682 if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
683 dbg("%s", "Port Paranoia failed \n");
684 return;
685 }
686
687 serial = mos7840_get_usb_serial(port, __FUNCTION__);
688 if (!serial) {
689 dbg("%s\n", "Bad serial pointer ");
690 return;
691 }
692
693 dbg("%s\n", "Entering... \n");
694
695 data = urb->transfer_buffer;
696
697 dbg("%s", "Entering ........... \n");
698
699 if (urb->actual_length) {
700 tty = mos7840_port->port->tty;
701 if (tty) {
702 tty_buffer_request_room(tty, urb->actual_length);
703 tty_insert_flip_string(tty, data, urb->actual_length);
704 dbg(" %s \n", data);
705 tty_flip_buffer_push(tty);
706 }
707 mos7840_port->icount.rx += urb->actual_length;
Oliver Neukum0de9a702007-03-16 20:28:28 +0100708 smp_wmb();
Paul B Schroeder3f542972006-08-31 19:41:47 -0500709 dbg("mos7840_port->icount.rx is %d:\n",
710 mos7840_port->icount.rx);
711 }
712
713 if (!mos7840_port->read_urb) {
714 dbg("%s", "URB KILLED !!!\n");
715 return;
716 }
717
Paul B Schroeder3f542972006-08-31 19:41:47 -0500718
Oliver Neukum0de9a702007-03-16 20:28:28 +0100719 mos7840_port->read_urb->dev = serial->dev;
Paul B Schroeder3f542972006-08-31 19:41:47 -0500720
Greg Kroah-Hartman0643c722007-06-15 15:44:13 -0700721 retval = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
Oliver Neukum0de9a702007-03-16 20:28:28 +0100722
Greg Kroah-Hartman0643c722007-06-15 15:44:13 -0700723 if (retval) {
724 dbg(" usb_submit_urb(read bulk) failed, retval = %d",
725 retval);
Paul B Schroeder3f542972006-08-31 19:41:47 -0500726 }
727}
728
729/*****************************************************************************
730 * mos7840_bulk_out_data_callback
731 * this is the callback function for when we have finished sending serial data
732 * on the bulk out endpoint.
733 *****************************************************************************/
734
David Howells7d12e782006-10-05 14:55:46 +0100735static void mos7840_bulk_out_data_callback(struct urb *urb)
Paul B Schroeder3f542972006-08-31 19:41:47 -0500736{
737 struct moschip_port *mos7840_port;
738 struct tty_struct *tty;
Greg Kroah-Hartman0643c722007-06-15 15:44:13 -0700739 int status = urb->status;
Oliver Neukum0de9a702007-03-16 20:28:28 +0100740 int i;
741
Oliver Neukum0de9a702007-03-16 20:28:28 +0100742 mos7840_port = (struct moschip_port *)urb->context;
743 spin_lock(&mos7840_port->pool_lock);
744 for (i = 0; i < NUM_URBS; i++) {
745 if (urb == mos7840_port->write_urb_pool[i]) {
746 mos7840_port->busy[i] = 0;
747 break;
748 }
749 }
750 spin_unlock(&mos7840_port->pool_lock);
751
Greg Kroah-Hartman0643c722007-06-15 15:44:13 -0700752 if (status) {
753 dbg("nonzero write bulk status received:%d\n", status);
Paul B Schroeder3f542972006-08-31 19:41:47 -0500754 return;
755 }
756
Paul B Schroeder3f542972006-08-31 19:41:47 -0500757 if (mos7840_port_paranoia_check(mos7840_port->port, __FUNCTION__)) {
758 dbg("%s", "Port Paranoia failed \n");
759 return;
760 }
761
762 dbg("%s \n", "Entering .........");
763
764 tty = mos7840_port->port->tty;
765
Jiri Slabyb963a842007-02-10 01:44:55 -0800766 if (tty && mos7840_port->open)
767 tty_wakeup(tty);
Paul B Schroeder3f542972006-08-31 19:41:47 -0500768
769}
770
771/************************************************************************/
772/* D R I V E R T T Y I N T E R F A C E F U N C T I O N S */
773/************************************************************************/
774#ifdef MCSSerialProbe
775static int mos7840_serial_probe(struct usb_serial *serial,
776 const struct usb_device_id *id)
777{
778
779 /*need to implement the mode_reg reading and updating\
780 structures usb_serial_ device_type\
781 (i.e num_ports, num_bulkin,bulkout etc) */
782 /* Also we can update the changes attach */
783 return 1;
784}
785#endif
786
787/*****************************************************************************
788 * mos7840_open
789 * this function is called by the tty driver when a port is opened
790 * If successful, we return 0
791 * Otherwise we return a negative error number.
792 *****************************************************************************/
793
794static int mos7840_open(struct usb_serial_port *port, struct file *filp)
795{
796 int response;
797 int j;
798 struct usb_serial *serial;
799 struct urb *urb;
800 __u16 Data;
801 int status;
802 struct moschip_port *mos7840_port;
Oliver Neukum0de9a702007-03-16 20:28:28 +0100803 struct moschip_port *port0;
Paul B Schroeder3f542972006-08-31 19:41:47 -0500804
805 if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
806 dbg("%s", "Port Paranoia failed \n");
807 return -ENODEV;
808 }
809
Paul B Schroeder3f542972006-08-31 19:41:47 -0500810 serial = port->serial;
811
812 if (mos7840_serial_paranoia_check(serial, __FUNCTION__)) {
813 dbg("%s", "Serial Paranoia failed \n");
814 return -ENODEV;
815 }
816
817 mos7840_port = mos7840_get_port_private(port);
Oliver Neukum0de9a702007-03-16 20:28:28 +0100818 port0 = mos7840_get_port_private(serial->port[0]);
Paul B Schroeder3f542972006-08-31 19:41:47 -0500819
Oliver Neukum0de9a702007-03-16 20:28:28 +0100820 if (mos7840_port == NULL || port0 == NULL)
Paul B Schroeder3f542972006-08-31 19:41:47 -0500821 return -ENODEV;
822
823 usb_clear_halt(serial->dev, port->write_urb->pipe);
824 usb_clear_halt(serial->dev, port->read_urb->pipe);
Oliver Neukum0de9a702007-03-16 20:28:28 +0100825 port0->open_ports++;
Paul B Schroeder3f542972006-08-31 19:41:47 -0500826
827 /* Initialising the write urb pool */
828 for (j = 0; j < NUM_URBS; ++j) {
Oliver Neukum0de9a702007-03-16 20:28:28 +0100829 urb = usb_alloc_urb(0, GFP_KERNEL);
Paul B Schroeder3f542972006-08-31 19:41:47 -0500830 mos7840_port->write_urb_pool[j] = urb;
831
832 if (urb == NULL) {
833 err("No more urbs???");
834 continue;
835 }
836
Oliver Neukum0de9a702007-03-16 20:28:28 +0100837 urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
Paul B Schroeder3f542972006-08-31 19:41:47 -0500838 if (!urb->transfer_buffer) {
Oliver Neukum0de9a702007-03-16 20:28:28 +0100839 usb_free_urb(urb);
840 mos7840_port->write_urb_pool[j] = NULL;
Paul B Schroeder3f542972006-08-31 19:41:47 -0500841 err("%s-out of memory for urb buffers.", __FUNCTION__);
842 continue;
843 }
844 }
845
846/*****************************************************************************
847 * Initialize MCS7840 -- Write Init values to corresponding Registers
848 *
849 * Register Index
850 * 1 : IER
851 * 2 : FCR
852 * 3 : LCR
853 * 4 : MCR
854 *
855 * 0x08 : SP1/2 Control Reg
856 *****************************************************************************/
857
858//NEED to check the following Block
859
860 status = 0;
861 Data = 0x0;
862 status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
863 if (status < 0) {
864 dbg("Reading Spreg failed\n");
865 return -1;
866 }
867 Data |= 0x80;
868 status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
869 if (status < 0) {
870 dbg("writing Spreg failed\n");
871 return -1;
872 }
873
874 Data &= ~0x80;
875 status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
876 if (status < 0) {
877 dbg("writing Spreg failed\n");
878 return -1;
879 }
880//End of block to be checked
881
882 status = 0;
883 Data = 0x0;
884 status =
885 mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data);
886 if (status < 0) {
887 dbg("Reading Controlreg failed\n");
888 return -1;
889 }
890 Data |= 0x08; //Driver done bit
891 Data |= 0x20; //rx_disable
Oliver Neukum0de9a702007-03-16 20:28:28 +0100892 status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data);
Paul B Schroeder3f542972006-08-31 19:41:47 -0500893 if (status < 0) {
894 dbg("writing Controlreg failed\n");
895 return -1;
896 }
897 //do register settings here
898 // Set all regs to the device default values.
899 ////////////////////////////////////
900 // First Disable all interrupts.
901 ////////////////////////////////////
902
903 Data = 0x00;
Paul B Schroeder3f542972006-08-31 19:41:47 -0500904 status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
905 if (status < 0) {
906 dbg("disableing interrupts failed\n");
907 return -1;
908 }
909 // Set FIFO_CONTROL_REGISTER to the default value
910 Data = 0x00;
Paul B Schroeder3f542972006-08-31 19:41:47 -0500911 status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
912 if (status < 0) {
913 dbg("Writing FIFO_CONTROL_REGISTER failed\n");
914 return -1;
915 }
916
917 Data = 0xcf;
Paul B Schroeder3f542972006-08-31 19:41:47 -0500918 status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
919 if (status < 0) {
920 dbg("Writing FIFO_CONTROL_REGISTER failed\n");
921 return -1;
922 }
923
924 Data = 0x03;
Paul B Schroeder3f542972006-08-31 19:41:47 -0500925 status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
926 mos7840_port->shadowLCR = Data;
927
928 Data = 0x0b;
Paul B Schroeder3f542972006-08-31 19:41:47 -0500929 status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
930 mos7840_port->shadowMCR = Data;
931
932 Data = 0x00;
Paul B Schroeder3f542972006-08-31 19:41:47 -0500933 status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
934 mos7840_port->shadowLCR = Data;
935
936 Data |= SERIAL_LCR_DLAB; //data latch enable in LCR 0x80
Paul B Schroeder3f542972006-08-31 19:41:47 -0500937 status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
938
939 Data = 0x0c;
940 status = 0;
941 status = mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
942
943 Data = 0x0;
944 status = 0;
945 status = mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
946
947 Data = 0x00;
948 status = 0;
949 status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
950
951 Data = Data & ~SERIAL_LCR_DLAB;
952 status = 0;
953 status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
954 mos7840_port->shadowLCR = Data;
955
956 //clearing Bulkin and Bulkout Fifo
957 Data = 0x0;
958 status = 0;
959 status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
960
961 Data = Data | 0x0c;
962 status = 0;
963 status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
964
965 Data = Data & ~0x0c;
966 status = 0;
967 status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
968 //Finally enable all interrupts
969 Data = 0x0;
970 Data = 0x0c;
971 status = 0;
972 status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
973
974 //clearing rx_disable
975 Data = 0x0;
976 status = 0;
977 status =
978 mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data);
979 Data = Data & ~0x20;
980 status = 0;
981 status =
982 mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data);
983
984 // rx_negate
985 Data = 0x0;
986 status = 0;
987 status =
988 mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, &Data);
989 Data = Data | 0x10;
990 status = 0;
991 status =
992 mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data);
993
994 /* force low_latency on so that our tty_push actually forces *
995 * the data through,otherwise it is scheduled, and with *
996 * high data rates (like with OHCI) data can get lost. */
997
998 if (port->tty)
999 port->tty->low_latency = 1;
1000/* Check to see if we've set up our endpoint info yet *
1001 * (can't set it up in mos7840_startup as the structures *
1002 * were not set up at that time.) */
Oliver Neukum0de9a702007-03-16 20:28:28 +01001003 if (port0->open_ports == 1) {
Paul B Schroeder3f542972006-08-31 19:41:47 -05001004 if (serial->port[0]->interrupt_in_buffer == NULL) {
1005
1006 /* set up interrupt urb */
1007
1008 usb_fill_int_urb(serial->port[0]->interrupt_in_urb,
1009 serial->dev,
1010 usb_rcvintpipe(serial->dev,
1011 serial->port[0]->
1012 interrupt_in_endpointAddress),
1013 serial->port[0]->interrupt_in_buffer,
1014 serial->port[0]->interrupt_in_urb->
1015 transfer_buffer_length,
1016 mos7840_interrupt_callback,
1017 serial,
1018 serial->port[0]->interrupt_in_urb->
1019 interval);
1020
1021 /* start interrupt read for mos7840 *
1022 * will continue as long as mos7840 is connected */
1023
1024 response =
1025 usb_submit_urb(serial->port[0]->interrupt_in_urb,
1026 GFP_KERNEL);
1027 if (response) {
1028 err("%s - Error %d submitting interrupt urb",
1029 __FUNCTION__, response);
1030 }
1031
1032 }
1033
1034 }
1035
1036 /* see if we've set up our endpoint info yet *
1037 * (can't set it up in mos7840_startup as the *
1038 * structures were not set up at that time.) */
1039
1040 dbg("port number is %d \n", port->number);
1041 dbg("serial number is %d \n", port->serial->minor);
1042 dbg("Bulkin endpoint is %d \n", port->bulk_in_endpointAddress);
1043 dbg("BulkOut endpoint is %d \n", port->bulk_out_endpointAddress);
1044 dbg("Interrupt endpoint is %d \n", port->interrupt_in_endpointAddress);
1045 dbg("port's number in the device is %d\n", mos7840_port->port_num);
1046 mos7840_port->read_urb = port->read_urb;
1047
1048 /* set up our bulk in urb */
1049
1050 usb_fill_bulk_urb(mos7840_port->read_urb,
1051 serial->dev,
1052 usb_rcvbulkpipe(serial->dev,
1053 port->bulk_in_endpointAddress),
1054 port->bulk_in_buffer,
1055 mos7840_port->read_urb->transfer_buffer_length,
1056 mos7840_bulk_in_callback, mos7840_port);
1057
1058 dbg("mos7840_open: bulkin endpoint is %d\n",
1059 port->bulk_in_endpointAddress);
1060 response = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
1061 if (response) {
1062 err("%s - Error %d submitting control urb", __FUNCTION__,
1063 response);
1064 }
1065
1066 /* initialize our wait queues */
1067 init_waitqueue_head(&mos7840_port->wait_chase);
1068 init_waitqueue_head(&mos7840_port->delta_msr_wait);
1069
1070 /* initialize our icount structure */
1071 memset(&(mos7840_port->icount), 0x00, sizeof(mos7840_port->icount));
1072
1073 /* initialize our port settings */
1074 mos7840_port->shadowMCR = MCR_MASTER_IE; /* Must set to enable ints! */
1075 /* send a open port command */
1076 mos7840_port->open = 1;
1077 //mos7840_change_port_settings(mos7840_port,old_termios);
1078 mos7840_port->icount.tx = 0;
1079 mos7840_port->icount.rx = 0;
1080
Al Viro97c49652006-10-09 20:29:03 +01001081 dbg("\n\nusb_serial serial:%p mos7840_port:%p\n usb_serial_port port:%p\n\n", serial, mos7840_port, port);
Paul B Schroeder3f542972006-08-31 19:41:47 -05001082
1083 return 0;
1084
1085}
1086
1087/*****************************************************************************
1088 * mos7840_chars_in_buffer
1089 * this function is called by the tty driver when it wants to know how many
1090 * bytes of data we currently have outstanding in the port (data that has
1091 * been written, but hasn't made it out the port yet)
1092 * If successful, we return the number of bytes left to be written in the
1093 * system,
1094 * Otherwise we return a negative error number.
1095 *****************************************************************************/
1096
1097static int mos7840_chars_in_buffer(struct usb_serial_port *port)
1098{
1099 int i;
1100 int chars = 0;
Oliver Neukum0de9a702007-03-16 20:28:28 +01001101 unsigned long flags;
Paul B Schroeder3f542972006-08-31 19:41:47 -05001102 struct moschip_port *mos7840_port;
1103
1104 dbg("%s \n", " mos7840_chars_in_buffer:entering ...........");
1105
1106 if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
1107 dbg("%s", "Invalid port \n");
1108 return -1;
1109 }
1110
1111 mos7840_port = mos7840_get_port_private(port);
1112 if (mos7840_port == NULL) {
1113 dbg("%s \n", "mos7840_break:leaving ...........");
1114 return -1;
1115 }
1116
Oliver Neukum0de9a702007-03-16 20:28:28 +01001117 spin_lock_irqsave(&mos7840_port->pool_lock,flags);
Paul B Schroeder3f542972006-08-31 19:41:47 -05001118 for (i = 0; i < NUM_URBS; ++i) {
Oliver Neukum0de9a702007-03-16 20:28:28 +01001119 if (mos7840_port->busy[i]) {
Paul B Schroeder3f542972006-08-31 19:41:47 -05001120 chars += URB_TRANSFER_BUFFER_SIZE;
1121 }
1122 }
Oliver Neukum0de9a702007-03-16 20:28:28 +01001123 spin_unlock_irqrestore(&mos7840_port->pool_lock,flags);
Paul B Schroeder3f542972006-08-31 19:41:47 -05001124 dbg("%s - returns %d", __FUNCTION__, chars);
Oliver Neukum0de9a702007-03-16 20:28:28 +01001125 return chars;
Paul B Schroeder3f542972006-08-31 19:41:47 -05001126
1127}
1128
1129/************************************************************************
1130 *
1131 * mos7840_block_until_tx_empty
1132 *
1133 * This function will block the close until one of the following:
1134 * 1. TX count are 0
1135 * 2. The mos7840 has stopped
1136 * 3. A timout of 3 seconds without activity has expired
1137 *
1138 ************************************************************************/
1139static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port)
1140{
1141 int timeout = HZ / 10;
1142 int wait = 30;
1143 int count;
1144
1145 while (1) {
1146
1147 count = mos7840_chars_in_buffer(mos7840_port->port);
1148
1149 /* Check for Buffer status */
1150 if (count <= 0) {
1151 return;
1152 }
1153
1154 /* Block the thread for a while */
1155 interruptible_sleep_on_timeout(&mos7840_port->wait_chase,
1156 timeout);
1157
1158 /* No activity.. count down section */
1159 wait--;
1160 if (wait == 0) {
1161 dbg("%s - TIMEOUT", __FUNCTION__);
1162 return;
1163 } else {
1164 /* Reset timout value back to seconds */
1165 wait = 30;
1166 }
1167 }
1168}
1169
1170/*****************************************************************************
1171 * mos7840_close
1172 * this function is called by the tty driver when a port is closed
1173 *****************************************************************************/
1174
1175static void mos7840_close(struct usb_serial_port *port, struct file *filp)
1176{
1177 struct usb_serial *serial;
1178 struct moschip_port *mos7840_port;
Oliver Neukum0de9a702007-03-16 20:28:28 +01001179 struct moschip_port *port0;
Paul B Schroeder3f542972006-08-31 19:41:47 -05001180 int j;
1181 __u16 Data;
1182
1183 dbg("%s\n", "mos7840_close:entering...");
1184
1185 if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
1186 dbg("%s", "Port Paranoia failed \n");
1187 return;
1188 }
1189
1190 serial = mos7840_get_usb_serial(port, __FUNCTION__);
1191 if (!serial) {
1192 dbg("%s", "Serial Paranoia failed \n");
1193 return;
1194 }
1195
1196 mos7840_port = mos7840_get_port_private(port);
Oliver Neukum0de9a702007-03-16 20:28:28 +01001197 port0 = mos7840_get_port_private(serial->port[0]);
Paul B Schroeder3f542972006-08-31 19:41:47 -05001198
Oliver Neukum0de9a702007-03-16 20:28:28 +01001199 if (mos7840_port == NULL || port0 == NULL)
Paul B Schroeder3f542972006-08-31 19:41:47 -05001200 return;
Paul B Schroeder3f542972006-08-31 19:41:47 -05001201
1202 for (j = 0; j < NUM_URBS; ++j)
1203 usb_kill_urb(mos7840_port->write_urb_pool[j]);
1204
1205 /* Freeing Write URBs */
1206 for (j = 0; j < NUM_URBS; ++j) {
1207 if (mos7840_port->write_urb_pool[j]) {
1208 if (mos7840_port->write_urb_pool[j]->transfer_buffer)
1209 kfree(mos7840_port->write_urb_pool[j]->
1210 transfer_buffer);
1211
1212 usb_free_urb(mos7840_port->write_urb_pool[j]);
1213 }
1214 }
1215
1216 if (serial->dev) {
1217 /* flush and block until tx is empty */
1218 mos7840_block_until_tx_empty(mos7840_port);
1219 }
1220
1221 /* While closing port, shutdown all bulk read, write *
1222 * and interrupt read if they exists */
1223 if (serial->dev) {
1224
1225 if (mos7840_port->write_urb) {
1226 dbg("%s", "Shutdown bulk write\n");
1227 usb_kill_urb(mos7840_port->write_urb);
1228 }
1229
1230 if (mos7840_port->read_urb) {
1231 dbg("%s", "Shutdown bulk read\n");
1232 usb_kill_urb(mos7840_port->read_urb);
1233 }
1234 if ((&mos7840_port->control_urb)) {
1235 dbg("%s", "Shutdown control read\n");
1236 // usb_kill_urb (mos7840_port->control_urb);
1237
1238 }
1239 }
1240// if(mos7840_port->ctrl_buf != NULL)
1241// kfree(mos7840_port->ctrl_buf);
Oliver Neukum0de9a702007-03-16 20:28:28 +01001242 port0->open_ports--;
Paul B Schroeder3f542972006-08-31 19:41:47 -05001243 dbg("mos7840_num_open_ports in close%d:in port%d\n",
Oliver Neukum0de9a702007-03-16 20:28:28 +01001244 port0->open_ports, port->number);
1245 if (port0->open_ports == 0) {
Paul B Schroeder3f542972006-08-31 19:41:47 -05001246 if (serial->port[0]->interrupt_in_urb) {
1247 dbg("%s", "Shutdown interrupt_in_urb\n");
Oliver Neukum0de9a702007-03-16 20:28:28 +01001248 usb_kill_urb(serial->port[0]->interrupt_in_urb);
Paul B Schroeder3f542972006-08-31 19:41:47 -05001249 }
1250 }
1251
1252 if (mos7840_port->write_urb) {
1253 /* if this urb had a transfer buffer already (old tx) free it */
1254
1255 if (mos7840_port->write_urb->transfer_buffer != NULL) {
1256 kfree(mos7840_port->write_urb->transfer_buffer);
1257 }
1258 usb_free_urb(mos7840_port->write_urb);
1259 }
1260
1261 Data = 0x0;
1262 mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
1263
1264 Data = 0x00;
1265 mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
1266
1267 mos7840_port->open = 0;
1268
1269 dbg("%s \n", "Leaving ............");
1270}
1271
1272/************************************************************************
1273 *
1274 * mos7840_block_until_chase_response
1275 *
1276 * This function will block the close until one of the following:
1277 * 1. Response to our Chase comes from mos7840
1278 * 2. A timout of 10 seconds without activity has expired
1279 * (1K of mos7840 data @ 2400 baud ==> 4 sec to empty)
1280 *
1281 ************************************************************************/
1282
1283static void mos7840_block_until_chase_response(struct moschip_port
1284 *mos7840_port)
1285{
1286 int timeout = 1 * HZ;
1287 int wait = 10;
1288 int count;
1289
1290 while (1) {
1291 count = mos7840_chars_in_buffer(mos7840_port->port);
1292
1293 /* Check for Buffer status */
1294 if (count <= 0) {
1295 return;
1296 }
1297
1298 /* Block the thread for a while */
1299 interruptible_sleep_on_timeout(&mos7840_port->wait_chase,
1300 timeout);
1301 /* No activity.. count down section */
1302 wait--;
1303 if (wait == 0) {
1304 dbg("%s - TIMEOUT", __FUNCTION__);
1305 return;
1306 } else {
1307 /* Reset timout value back to seconds */
1308 wait = 10;
1309 }
1310 }
1311
1312}
1313
1314/*****************************************************************************
1315 * mos7840_break
1316 * this function sends a break to the port
1317 *****************************************************************************/
1318static void mos7840_break(struct usb_serial_port *port, int break_state)
1319{
1320 unsigned char data;
1321 struct usb_serial *serial;
1322 struct moschip_port *mos7840_port;
1323
1324 dbg("%s \n", "Entering ...........");
1325 dbg("mos7840_break: Start\n");
1326
1327 if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
1328 dbg("%s", "Port Paranoia failed \n");
1329 return;
1330 }
1331
1332 serial = mos7840_get_usb_serial(port, __FUNCTION__);
1333 if (!serial) {
1334 dbg("%s", "Serial Paranoia failed \n");
1335 return;
1336 }
1337
1338 mos7840_port = mos7840_get_port_private(port);
1339
1340 if (mos7840_port == NULL) {
1341 return;
1342 }
1343
1344 if (serial->dev) {
1345
1346 /* flush and block until tx is empty */
1347 mos7840_block_until_chase_response(mos7840_port);
1348 }
1349
1350 if (break_state == -1) {
1351 data = mos7840_port->shadowLCR | LCR_SET_BREAK;
1352 } else {
1353 data = mos7840_port->shadowLCR & ~LCR_SET_BREAK;
1354 }
1355
1356 mos7840_port->shadowLCR = data;
1357 dbg("mcs7840_break mos7840_port->shadowLCR is %x\n",
1358 mos7840_port->shadowLCR);
1359 mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER,
1360 mos7840_port->shadowLCR);
1361
1362 return;
1363}
1364
1365/*****************************************************************************
1366 * mos7840_write_room
1367 * this function is called by the tty driver when it wants to know how many
1368 * bytes of data we can accept for a specific port.
1369 * If successful, we return the amount of room that we have for this port
1370 * Otherwise we return a negative error number.
1371 *****************************************************************************/
1372
1373static int mos7840_write_room(struct usb_serial_port *port)
1374{
1375 int i;
1376 int room = 0;
Oliver Neukum0de9a702007-03-16 20:28:28 +01001377 unsigned long flags;
Paul B Schroeder3f542972006-08-31 19:41:47 -05001378 struct moschip_port *mos7840_port;
1379
1380 dbg("%s \n", " mos7840_write_room:entering ...........");
1381
1382 if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
1383 dbg("%s", "Invalid port \n");
1384 dbg("%s \n", " mos7840_write_room:leaving ...........");
1385 return -1;
1386 }
1387
1388 mos7840_port = mos7840_get_port_private(port);
1389 if (mos7840_port == NULL) {
1390 dbg("%s \n", "mos7840_break:leaving ...........");
1391 return -1;
1392 }
1393
Oliver Neukum0de9a702007-03-16 20:28:28 +01001394 spin_lock_irqsave(&mos7840_port->pool_lock, flags);
Paul B Schroeder3f542972006-08-31 19:41:47 -05001395 for (i = 0; i < NUM_URBS; ++i) {
Oliver Neukum0de9a702007-03-16 20:28:28 +01001396 if (!mos7840_port->busy[i]) {
Paul B Schroeder3f542972006-08-31 19:41:47 -05001397 room += URB_TRANSFER_BUFFER_SIZE;
1398 }
1399 }
Oliver Neukum0de9a702007-03-16 20:28:28 +01001400 spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
Paul B Schroeder3f542972006-08-31 19:41:47 -05001401
Oliver Neukum0de9a702007-03-16 20:28:28 +01001402 room = (room == 0) ? 0 : room - URB_TRANSFER_BUFFER_SIZE + 1;
Paul B Schroeder3f542972006-08-31 19:41:47 -05001403 dbg("%s - returns %d", __FUNCTION__, room);
Oliver Neukum0de9a702007-03-16 20:28:28 +01001404 return room;
Paul B Schroeder3f542972006-08-31 19:41:47 -05001405
1406}
1407
1408/*****************************************************************************
1409 * mos7840_write
1410 * this function is called by the tty driver when data should be written to
1411 * the port.
1412 * If successful, we return the number of bytes written, otherwise we
1413 * return a negative error number.
1414 *****************************************************************************/
1415
1416static int mos7840_write(struct usb_serial_port *port,
1417 const unsigned char *data, int count)
1418{
1419 int status;
1420 int i;
1421 int bytes_sent = 0;
1422 int transfer_size;
Oliver Neukum0de9a702007-03-16 20:28:28 +01001423 unsigned long flags;
Paul B Schroeder3f542972006-08-31 19:41:47 -05001424
1425 struct moschip_port *mos7840_port;
1426 struct usb_serial *serial;
1427 struct urb *urb;
1428 //__u16 Data;
1429 const unsigned char *current_position = data;
1430 unsigned char *data1;
1431 dbg("%s \n", "entering ...........");
1432 //dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",mos7840_port->shadowLCR);
1433
1434#ifdef NOTMOS7840
1435 Data = 0x00;
1436 status = 0;
1437 status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
1438 mos7840_port->shadowLCR = Data;
1439 dbg("mos7840_write: LINE_CONTROL_REGISTER is %x\n", Data);
1440 dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",
1441 mos7840_port->shadowLCR);
1442
1443 //Data = 0x03;
1444 //status = mos7840_set_uart_reg(port,LINE_CONTROL_REGISTER,Data);
1445 //mos7840_port->shadowLCR=Data;//Need to add later
1446
1447 Data |= SERIAL_LCR_DLAB; //data latch enable in LCR 0x80
1448 status = 0;
1449 status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
1450
1451 //Data = 0x0c;
1452 //status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data);
1453 Data = 0x00;
1454 status = 0;
1455 status = mos7840_get_uart_reg(port, DIVISOR_LATCH_LSB, &Data);
1456 dbg("mos7840_write:DLL value is %x\n", Data);
1457
1458 Data = 0x0;
1459 status = 0;
1460 status = mos7840_get_uart_reg(port, DIVISOR_LATCH_MSB, &Data);
1461 dbg("mos7840_write:DLM value is %x\n", Data);
1462
1463 Data = Data & ~SERIAL_LCR_DLAB;
1464 dbg("mos7840_write: mos7840_port->shadowLCR is %x\n",
1465 mos7840_port->shadowLCR);
1466 status = 0;
1467 status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
1468#endif
1469
1470 if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
1471 dbg("%s", "Port Paranoia failed \n");
1472 return -1;
1473 }
1474
1475 serial = port->serial;
1476 if (mos7840_serial_paranoia_check(serial, __FUNCTION__)) {
1477 dbg("%s", "Serial Paranoia failed \n");
1478 return -1;
1479 }
1480
1481 mos7840_port = mos7840_get_port_private(port);
1482 if (mos7840_port == NULL) {
1483 dbg("%s", "mos7840_port is NULL\n");
1484 return -1;
1485 }
1486
1487 /* try to find a free urb in the list */
1488 urb = NULL;
1489
Oliver Neukum0de9a702007-03-16 20:28:28 +01001490 spin_lock_irqsave(&mos7840_port->pool_lock, flags);
Paul B Schroeder3f542972006-08-31 19:41:47 -05001491 for (i = 0; i < NUM_URBS; ++i) {
Oliver Neukum0de9a702007-03-16 20:28:28 +01001492 if (!mos7840_port->busy[i]) {
1493 mos7840_port->busy[i] = 1;
Paul B Schroeder3f542972006-08-31 19:41:47 -05001494 urb = mos7840_port->write_urb_pool[i];
1495 dbg("\nURB:%d", i);
1496 break;
1497 }
1498 }
Oliver Neukum0de9a702007-03-16 20:28:28 +01001499 spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
Paul B Schroeder3f542972006-08-31 19:41:47 -05001500
1501 if (urb == NULL) {
1502 dbg("%s - no more free urbs", __FUNCTION__);
1503 goto exit;
1504 }
1505
1506 if (urb->transfer_buffer == NULL) {
1507 urb->transfer_buffer =
1508 kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
1509
1510 if (urb->transfer_buffer == NULL) {
1511 err("%s no more kernel memory...", __FUNCTION__);
1512 goto exit;
1513 }
1514 }
1515 transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
1516
Al Viro97c49652006-10-09 20:29:03 +01001517 memcpy(urb->transfer_buffer, current_position, transfer_size);
Paul B Schroeder3f542972006-08-31 19:41:47 -05001518
1519 /* fill urb with data and submit */
1520 usb_fill_bulk_urb(urb,
1521 serial->dev,
1522 usb_sndbulkpipe(serial->dev,
1523 port->bulk_out_endpointAddress),
1524 urb->transfer_buffer,
1525 transfer_size,
1526 mos7840_bulk_out_data_callback, mos7840_port);
1527
1528 data1 = urb->transfer_buffer;
1529 dbg("\nbulkout endpoint is %d", port->bulk_out_endpointAddress);
1530
1531 /* send it down the pipe */
1532 status = usb_submit_urb(urb, GFP_ATOMIC);
1533
1534 if (status) {
Oliver Neukum0de9a702007-03-16 20:28:28 +01001535 mos7840_port->busy[i] = 0;
Paul B Schroeder3f542972006-08-31 19:41:47 -05001536 err("%s - usb_submit_urb(write bulk) failed with status = %d",
1537 __FUNCTION__, status);
1538 bytes_sent = status;
1539 goto exit;
1540 }
1541 bytes_sent = transfer_size;
1542 mos7840_port->icount.tx += transfer_size;
Oliver Neukum0de9a702007-03-16 20:28:28 +01001543 smp_wmb();
Paul B Schroeder3f542972006-08-31 19:41:47 -05001544 dbg("mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx);
1545 exit:
1546
1547 return bytes_sent;
1548
1549}
1550
1551/*****************************************************************************
1552 * mos7840_throttle
1553 * this function is called by the tty driver when it wants to stop the data
1554 * being read from the port.
1555 *****************************************************************************/
1556
1557static void mos7840_throttle(struct usb_serial_port *port)
1558{
1559 struct moschip_port *mos7840_port;
1560 struct tty_struct *tty;
1561 int status;
1562
1563 if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
1564 dbg("%s", "Invalid port \n");
1565 return;
1566 }
1567
1568 dbg("- port %d\n", port->number);
1569
1570 mos7840_port = mos7840_get_port_private(port);
1571
1572 if (mos7840_port == NULL)
1573 return;
1574
1575 if (!mos7840_port->open) {
1576 dbg("%s\n", "port not opened");
1577 return;
1578 }
1579
1580 dbg("%s", "Entering .......... \n");
1581
1582 tty = port->tty;
1583 if (!tty) {
1584 dbg("%s - no tty available", __FUNCTION__);
1585 return;
1586 }
1587
1588 /* if we are implementing XON/XOFF, send the stop character */
1589 if (I_IXOFF(tty)) {
1590 unsigned char stop_char = STOP_CHAR(tty);
1591 status = mos7840_write(port, &stop_char, 1);
1592 if (status <= 0) {
1593 return;
1594 }
1595 }
1596
1597 /* if we are implementing RTS/CTS, toggle that line */
1598 if (tty->termios->c_cflag & CRTSCTS) {
1599 mos7840_port->shadowMCR &= ~MCR_RTS;
1600 status = 0;
1601 status =
1602 mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
1603 mos7840_port->shadowMCR);
1604
1605 if (status < 0) {
1606 return;
1607 }
1608 }
1609
1610 return;
1611}
1612
1613/*****************************************************************************
1614 * mos7840_unthrottle
1615 * this function is called by the tty driver when it wants to resume the data
1616 * being read from the port (called after SerialThrottle is called)
1617 *****************************************************************************/
1618static void mos7840_unthrottle(struct usb_serial_port *port)
1619{
1620 struct tty_struct *tty;
1621 int status;
1622 struct moschip_port *mos7840_port = mos7840_get_port_private(port);
1623
1624 if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
1625 dbg("%s", "Invalid port \n");
1626 return;
1627 }
1628
1629 if (mos7840_port == NULL)
1630 return;
1631
1632 if (!mos7840_port->open) {
1633 dbg("%s - port not opened", __FUNCTION__);
1634 return;
1635 }
1636
1637 dbg("%s", "Entering .......... \n");
1638
1639 tty = port->tty;
1640 if (!tty) {
1641 dbg("%s - no tty available", __FUNCTION__);
1642 return;
1643 }
1644
1645 /* if we are implementing XON/XOFF, send the start character */
1646 if (I_IXOFF(tty)) {
1647 unsigned char start_char = START_CHAR(tty);
1648 status = mos7840_write(port, &start_char, 1);
1649 if (status <= 0) {
1650 return;
1651 }
1652 }
1653
1654 /* if we are implementing RTS/CTS, toggle that line */
1655 if (tty->termios->c_cflag & CRTSCTS) {
1656 mos7840_port->shadowMCR |= MCR_RTS;
1657 status = 0;
1658 status =
1659 mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
1660 mos7840_port->shadowMCR);
1661 if (status < 0) {
1662 return;
1663 }
1664 }
1665
1666 return;
1667}
1668
1669static int mos7840_tiocmget(struct usb_serial_port *port, struct file *file)
1670{
1671 struct moschip_port *mos7840_port;
1672 unsigned int result;
1673 __u16 msr;
1674 __u16 mcr;
1675 int status = 0;
1676 mos7840_port = mos7840_get_port_private(port);
1677
1678 dbg("%s - port %d", __FUNCTION__, port->number);
1679
1680 if (mos7840_port == NULL)
1681 return -ENODEV;
1682
1683 status = mos7840_get_uart_reg(port, MODEM_STATUS_REGISTER, &msr);
1684 status = mos7840_get_uart_reg(port, MODEM_CONTROL_REGISTER, &mcr);
1685 result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)
1686 | ((mcr & MCR_RTS) ? TIOCM_RTS : 0)
1687 | ((mcr & MCR_LOOPBACK) ? TIOCM_LOOP : 0)
1688 | ((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0)
1689 | ((msr & MOS7840_MSR_CD) ? TIOCM_CAR : 0)
1690 | ((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0)
1691 | ((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0);
1692
1693 dbg("%s - 0x%04X", __FUNCTION__, result);
1694
1695 return result;
1696}
1697
1698static int mos7840_tiocmset(struct usb_serial_port *port, struct file *file,
1699 unsigned int set, unsigned int clear)
1700{
1701 struct moschip_port *mos7840_port;
1702 unsigned int mcr;
1703 unsigned int status;
1704
1705 dbg("%s - port %d", __FUNCTION__, port->number);
1706
1707 mos7840_port = mos7840_get_port_private(port);
1708
1709 if (mos7840_port == NULL)
1710 return -ENODEV;
1711
1712 mcr = mos7840_port->shadowMCR;
1713 if (clear & TIOCM_RTS)
1714 mcr &= ~MCR_RTS;
1715 if (clear & TIOCM_DTR)
1716 mcr &= ~MCR_DTR;
1717 if (clear & TIOCM_LOOP)
1718 mcr &= ~MCR_LOOPBACK;
1719
1720 if (set & TIOCM_RTS)
1721 mcr |= MCR_RTS;
1722 if (set & TIOCM_DTR)
1723 mcr |= MCR_DTR;
1724 if (set & TIOCM_LOOP)
1725 mcr |= MCR_LOOPBACK;
1726
1727 mos7840_port->shadowMCR = mcr;
1728
1729 status = 0;
1730 status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr);
1731 if (status < 0) {
1732 dbg("setting MODEM_CONTROL_REGISTER Failed\n");
1733 return -1;
1734 }
1735
1736 return 0;
1737}
1738
1739/*****************************************************************************
1740 * mos7840_calc_baud_rate_divisor
1741 * this function calculates the proper baud rate divisor for the specified
1742 * baud rate.
1743 *****************************************************************************/
1744static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor,
1745 __u16 * clk_sel_val)
1746{
1747
1748 dbg("%s - %d", __FUNCTION__, baudRate);
1749
1750 if (baudRate <= 115200) {
1751 *divisor = 115200 / baudRate;
1752 *clk_sel_val = 0x0;
1753 }
1754 if ((baudRate > 115200) && (baudRate <= 230400)) {
1755 *divisor = 230400 / baudRate;
1756 *clk_sel_val = 0x10;
1757 } else if ((baudRate > 230400) && (baudRate <= 403200)) {
1758 *divisor = 403200 / baudRate;
1759 *clk_sel_val = 0x20;
1760 } else if ((baudRate > 403200) && (baudRate <= 460800)) {
1761 *divisor = 460800 / baudRate;
1762 *clk_sel_val = 0x30;
1763 } else if ((baudRate > 460800) && (baudRate <= 806400)) {
1764 *divisor = 806400 / baudRate;
1765 *clk_sel_val = 0x40;
1766 } else if ((baudRate > 806400) && (baudRate <= 921600)) {
1767 *divisor = 921600 / baudRate;
1768 *clk_sel_val = 0x50;
1769 } else if ((baudRate > 921600) && (baudRate <= 1572864)) {
1770 *divisor = 1572864 / baudRate;
1771 *clk_sel_val = 0x60;
1772 } else if ((baudRate > 1572864) && (baudRate <= 3145728)) {
1773 *divisor = 3145728 / baudRate;
1774 *clk_sel_val = 0x70;
1775 }
1776 return 0;
1777
1778#ifdef NOTMCS7840
1779
1780 for (i = 0; i < ARRAY_SIZE(mos7840_divisor_table); i++) {
1781 if (mos7840_divisor_table[i].BaudRate == baudrate) {
1782 *divisor = mos7840_divisor_table[i].Divisor;
1783 return 0;
1784 }
1785 }
1786
1787 /* After trying for all the standard baud rates *
1788 * Try calculating the divisor for this baud rate */
1789
1790 if (baudrate > 75 && baudrate < 230400) {
1791 /* get the divisor */
1792 custom = (__u16) (230400L / baudrate);
1793
1794 /* Check for round off */
1795 round1 = (__u16) (2304000L / baudrate);
1796 round = (__u16) (round1 - (custom * 10));
1797 if (round > 4) {
1798 custom++;
1799 }
1800 *divisor = custom;
1801
1802 dbg(" Baud %d = %d\n", baudrate, custom);
1803 return 0;
1804 }
1805
1806 dbg("%s\n", " Baud calculation Failed...");
1807 return -1;
1808#endif
1809}
1810
1811/*****************************************************************************
1812 * mos7840_send_cmd_write_baud_rate
1813 * this function sends the proper command to change the baud rate of the
1814 * specified port.
1815 *****************************************************************************/
1816
1817static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
1818 int baudRate)
1819{
1820 int divisor = 0;
1821 int status;
1822 __u16 Data;
1823 unsigned char number;
1824 __u16 clk_sel_val;
1825 struct usb_serial_port *port;
1826
1827 if (mos7840_port == NULL)
1828 return -1;
1829
1830 port = (struct usb_serial_port *)mos7840_port->port;
1831 if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
1832 dbg("%s", "Invalid port \n");
1833 return -1;
1834 }
1835
1836 if (mos7840_serial_paranoia_check(port->serial, __FUNCTION__)) {
1837 dbg("%s", "Invalid Serial \n");
1838 return -1;
1839 }
1840
1841 dbg("%s", "Entering .......... \n");
1842
1843 number = mos7840_port->port->number - mos7840_port->port->serial->minor;
1844
1845 dbg("%s - port = %d, baud = %d", __FUNCTION__,
1846 mos7840_port->port->number, baudRate);
1847 //reset clk_uart_sel in spregOffset
1848 if (baudRate > 115200) {
1849#ifdef HW_flow_control
1850 //NOTE: need to see the pther register to modify
1851 //setting h/w flow control bit to 1;
1852 status = 0;
1853 Data = 0x2b;
1854 mos7840_port->shadowMCR = Data;
1855 status =
1856 mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
1857 if (status < 0) {
1858 dbg("Writing spreg failed in set_serial_baud\n");
1859 return -1;
1860 }
1861#endif
1862
1863 } else {
1864#ifdef HW_flow_control
1865 //setting h/w flow control bit to 0;
1866 status = 0;
1867 Data = 0xb;
1868 mos7840_port->shadowMCR = Data;
1869 status =
1870 mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
1871 if (status < 0) {
1872 dbg("Writing spreg failed in set_serial_baud\n");
1873 return -1;
1874 }
1875#endif
1876
1877 }
1878
1879 if (1) //baudRate <= 115200)
1880 {
1881 clk_sel_val = 0x0;
1882 Data = 0x0;
1883 status = 0;
1884 status =
1885 mos7840_calc_baud_rate_divisor(baudRate, &divisor,
1886 &clk_sel_val);
1887 status =
1888 mos7840_get_reg_sync(port, mos7840_port->SpRegOffset,
1889 &Data);
1890 if (status < 0) {
1891 dbg("reading spreg failed in set_serial_baud\n");
1892 return -1;
1893 }
1894 Data = (Data & 0x8f) | clk_sel_val;
1895 status = 0;
1896 status =
1897 mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
1898 if (status < 0) {
1899 dbg("Writing spreg failed in set_serial_baud\n");
1900 return -1;
1901 }
1902 /* Calculate the Divisor */
1903
1904 if (status) {
1905 err("%s - bad baud rate", __FUNCTION__);
1906 dbg("%s\n", "bad baud rate");
1907 return status;
1908 }
1909 /* Enable access to divisor latch */
1910 Data = mos7840_port->shadowLCR | SERIAL_LCR_DLAB;
1911 mos7840_port->shadowLCR = Data;
1912 mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
1913
1914 /* Write the divisor */
1915 Data = (unsigned char)(divisor & 0xff);
1916 dbg("set_serial_baud Value to write DLL is %x\n", Data);
1917 mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
1918
1919 Data = (unsigned char)((divisor & 0xff00) >> 8);
1920 dbg("set_serial_baud Value to write DLM is %x\n", Data);
1921 mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
1922
1923 /* Disable access to divisor latch */
1924 Data = mos7840_port->shadowLCR & ~SERIAL_LCR_DLAB;
1925 mos7840_port->shadowLCR = Data;
1926 mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
1927
1928 }
1929
1930 return status;
1931}
1932
1933/*****************************************************************************
1934 * mos7840_change_port_settings
1935 * This routine is called to set the UART on the device to match
1936 * the specified new settings.
1937 *****************************************************************************/
1938
1939static void mos7840_change_port_settings(struct moschip_port *mos7840_port,
Alan Cox606d0992006-12-08 02:38:45 -08001940 struct ktermios *old_termios)
Paul B Schroeder3f542972006-08-31 19:41:47 -05001941{
1942 struct tty_struct *tty;
1943 int baud;
1944 unsigned cflag;
1945 unsigned iflag;
1946 __u8 lData;
1947 __u8 lParity;
1948 __u8 lStop;
1949 int status;
1950 __u16 Data;
1951 struct usb_serial_port *port;
1952 struct usb_serial *serial;
1953
1954 if (mos7840_port == NULL)
1955 return;
1956
1957 port = (struct usb_serial_port *)mos7840_port->port;
1958
1959 if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
1960 dbg("%s", "Invalid port \n");
1961 return;
1962 }
1963
1964 if (mos7840_serial_paranoia_check(port->serial, __FUNCTION__)) {
1965 dbg("%s", "Invalid Serial \n");
1966 return;
1967 }
1968
1969 serial = port->serial;
1970
1971 dbg("%s - port %d", __FUNCTION__, mos7840_port->port->number);
1972
1973 if (!mos7840_port->open) {
1974 dbg("%s - port not opened", __FUNCTION__);
1975 return;
1976 }
1977
1978 tty = mos7840_port->port->tty;
1979
Paul B Schroeder3f542972006-08-31 19:41:47 -05001980 dbg("%s", "Entering .......... \n");
1981
1982 lData = LCR_BITS_8;
1983 lStop = LCR_STOP_1;
1984 lParity = LCR_PAR_NONE;
1985
1986 cflag = tty->termios->c_cflag;
1987 iflag = tty->termios->c_iflag;
1988
1989 /* Change the number of bits */
1990 if (cflag & CSIZE) {
1991 switch (cflag & CSIZE) {
1992 case CS5:
1993 lData = LCR_BITS_5;
1994 break;
1995
1996 case CS6:
1997 lData = LCR_BITS_6;
1998 break;
1999
2000 case CS7:
2001 lData = LCR_BITS_7;
2002 break;
2003 default:
2004 case CS8:
2005 lData = LCR_BITS_8;
2006 break;
2007 }
2008 }
2009 /* Change the Parity bit */
2010 if (cflag & PARENB) {
2011 if (cflag & PARODD) {
2012 lParity = LCR_PAR_ODD;
2013 dbg("%s - parity = odd", __FUNCTION__);
2014 } else {
2015 lParity = LCR_PAR_EVEN;
2016 dbg("%s - parity = even", __FUNCTION__);
2017 }
2018
2019 } else {
2020 dbg("%s - parity = none", __FUNCTION__);
2021 }
2022
2023 if (cflag & CMSPAR) {
2024 lParity = lParity | 0x20;
2025 }
2026
2027 /* Change the Stop bit */
2028 if (cflag & CSTOPB) {
2029 lStop = LCR_STOP_2;
2030 dbg("%s - stop bits = 2", __FUNCTION__);
2031 } else {
2032 lStop = LCR_STOP_1;
2033 dbg("%s - stop bits = 1", __FUNCTION__);
2034 }
2035
2036 /* Update the LCR with the correct value */
2037 mos7840_port->shadowLCR &=
2038 ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
2039 mos7840_port->shadowLCR |= (lData | lParity | lStop);
2040
2041 dbg("mos7840_change_port_settings mos7840_port->shadowLCR is %x\n",
2042 mos7840_port->shadowLCR);
2043 /* Disable Interrupts */
2044 Data = 0x00;
2045 mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
2046
2047 Data = 0x00;
2048 mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
2049
2050 Data = 0xcf;
2051 mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
2052
2053 /* Send the updated LCR value to the mos7840 */
2054 Data = mos7840_port->shadowLCR;
2055
2056 mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
2057
2058 Data = 0x00b;
2059 mos7840_port->shadowMCR = Data;
2060 mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
2061 Data = 0x00b;
2062 mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
2063
2064 /* set up the MCR register and send it to the mos7840 */
2065
2066 mos7840_port->shadowMCR = MCR_MASTER_IE;
2067 if (cflag & CBAUD) {
2068 mos7840_port->shadowMCR |= (MCR_DTR | MCR_RTS);
2069 }
2070
2071 if (cflag & CRTSCTS) {
2072 mos7840_port->shadowMCR |= (MCR_XON_ANY);
2073
2074 } else {
2075 mos7840_port->shadowMCR &= ~(MCR_XON_ANY);
2076 }
2077
2078 Data = mos7840_port->shadowMCR;
2079 mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
2080
2081 /* Determine divisor based on baud rate */
2082 baud = tty_get_baud_rate(tty);
2083
2084 if (!baud) {
2085 /* pick a default, any default... */
2086 dbg("%s\n", "Picked default baud...");
2087 baud = 9600;
2088 }
2089
2090 dbg("%s - baud rate = %d", __FUNCTION__, baud);
2091 status = mos7840_send_cmd_write_baud_rate(mos7840_port, baud);
2092
2093 /* Enable Interrupts */
2094 Data = 0x0c;
2095 mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
2096
2097 if (mos7840_port->read_urb->status != -EINPROGRESS) {
2098 mos7840_port->read_urb->dev = serial->dev;
2099
2100 status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
2101
2102 if (status) {
2103 dbg(" usb_submit_urb(read bulk) failed, status = %d",
2104 status);
2105 }
2106 }
2107 wake_up(&mos7840_port->delta_msr_wait);
2108 mos7840_port->delta_msr_cond = 1;
2109 dbg("mos7840_change_port_settings mos7840_port->shadowLCR is End %x\n",
2110 mos7840_port->shadowLCR);
2111
2112 return;
2113}
2114
2115/*****************************************************************************
2116 * mos7840_set_termios
2117 * this function is called by the tty driver when it wants to change
2118 * the termios structure
2119 *****************************************************************************/
2120
2121static void mos7840_set_termios(struct usb_serial_port *port,
Alan Cox606d0992006-12-08 02:38:45 -08002122 struct ktermios *old_termios)
Paul B Schroeder3f542972006-08-31 19:41:47 -05002123{
2124 int status;
2125 unsigned int cflag;
2126 struct usb_serial *serial;
2127 struct moschip_port *mos7840_port;
2128 struct tty_struct *tty;
2129 dbg("mos7840_set_termios: START\n");
2130 if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
2131 dbg("%s", "Invalid port \n");
2132 return;
2133 }
2134
2135 serial = port->serial;
2136
2137 if (mos7840_serial_paranoia_check(serial, __FUNCTION__)) {
2138 dbg("%s", "Invalid Serial \n");
2139 return;
2140 }
2141
2142 mos7840_port = mos7840_get_port_private(port);
2143
2144 if (mos7840_port == NULL)
2145 return;
2146
2147 tty = port->tty;
2148
Paul B Schroeder3f542972006-08-31 19:41:47 -05002149 if (!mos7840_port->open) {
2150 dbg("%s - port not opened", __FUNCTION__);
2151 return;
2152 }
2153
2154 dbg("%s\n", "setting termios - ");
2155
2156 cflag = tty->termios->c_cflag;
2157
Paul B Schroeder3f542972006-08-31 19:41:47 -05002158 dbg("%s - clfag %08x iflag %08x", __FUNCTION__,
2159 tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
Alan Cox3d3ddce2007-10-15 20:53:35 +01002160 dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__,
2161 old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
Paul B Schroeder3f542972006-08-31 19:41:47 -05002162 dbg("%s - port %d", __FUNCTION__, port->number);
2163
2164 /* change the port settings to the new ones specified */
2165
2166 mos7840_change_port_settings(mos7840_port, old_termios);
2167
2168 if (!mos7840_port->read_urb) {
2169 dbg("%s", "URB KILLED !!!!!\n");
2170 return;
2171 }
2172
2173 if (mos7840_port->read_urb->status != -EINPROGRESS) {
2174 mos7840_port->read_urb->dev = serial->dev;
2175 status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
2176 if (status) {
2177 dbg(" usb_submit_urb(read bulk) failed, status = %d",
2178 status);
2179 }
2180 }
2181 return;
2182}
2183
2184/*****************************************************************************
2185 * mos7840_get_lsr_info - get line status register info
2186 *
2187 * Purpose: Let user call ioctl() to get info when the UART physically
2188 * is emptied. On bus types like RS485, the transmitter must
2189 * release the bus after transmitting. This must be done when
2190 * the transmit shift register is empty, not be done when the
2191 * transmit holding register is empty. This functionality
2192 * allows an RS485 driver to be written in user space.
2193 *****************************************************************************/
2194
2195static int mos7840_get_lsr_info(struct moschip_port *mos7840_port,
Al Viro97c49652006-10-09 20:29:03 +01002196 unsigned int __user *value)
Paul B Schroeder3f542972006-08-31 19:41:47 -05002197{
2198 int count;
2199 unsigned int result = 0;
2200
2201 count = mos7840_chars_in_buffer(mos7840_port->port);
2202 if (count == 0) {
2203 dbg("%s -- Empty", __FUNCTION__);
2204 result = TIOCSER_TEMT;
2205 }
2206
2207 if (copy_to_user(value, &result, sizeof(int)))
2208 return -EFAULT;
2209 return 0;
2210}
2211
2212/*****************************************************************************
Paul B Schroeder3f542972006-08-31 19:41:47 -05002213 * mos7840_set_modem_info
2214 * function to set modem info
2215 *****************************************************************************/
2216
2217static int mos7840_set_modem_info(struct moschip_port *mos7840_port,
Al Viro97c49652006-10-09 20:29:03 +01002218 unsigned int cmd, unsigned int __user *value)
Paul B Schroeder3f542972006-08-31 19:41:47 -05002219{
2220 unsigned int mcr;
2221 unsigned int arg;
2222 __u16 Data;
2223 int status;
2224 struct usb_serial_port *port;
2225
2226 if (mos7840_port == NULL)
2227 return -1;
2228
2229 port = (struct usb_serial_port *)mos7840_port->port;
2230 if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
2231 dbg("%s", "Invalid port \n");
2232 return -1;
2233 }
2234
2235 mcr = mos7840_port->shadowMCR;
2236
2237 if (copy_from_user(&arg, value, sizeof(int)))
2238 return -EFAULT;
2239
2240 switch (cmd) {
2241 case TIOCMBIS:
2242 if (arg & TIOCM_RTS)
2243 mcr |= MCR_RTS;
2244 if (arg & TIOCM_DTR)
2245 mcr |= MCR_RTS;
2246 if (arg & TIOCM_LOOP)
2247 mcr |= MCR_LOOPBACK;
2248 break;
2249
2250 case TIOCMBIC:
2251 if (arg & TIOCM_RTS)
2252 mcr &= ~MCR_RTS;
2253 if (arg & TIOCM_DTR)
2254 mcr &= ~MCR_RTS;
2255 if (arg & TIOCM_LOOP)
2256 mcr &= ~MCR_LOOPBACK;
2257 break;
2258
2259 case TIOCMSET:
2260 /* turn off the RTS and DTR and LOOPBACK
2261 * and then only turn on what was asked to */
2262 mcr &= ~(MCR_RTS | MCR_DTR | MCR_LOOPBACK);
2263 mcr |= ((arg & TIOCM_RTS) ? MCR_RTS : 0);
2264 mcr |= ((arg & TIOCM_DTR) ? MCR_DTR : 0);
2265 mcr |= ((arg & TIOCM_LOOP) ? MCR_LOOPBACK : 0);
2266 break;
2267 }
2268
2269 mos7840_port->shadowMCR = mcr;
2270
2271 Data = mos7840_port->shadowMCR;
2272 status = 0;
2273 status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
2274 if (status < 0) {
2275 dbg("setting MODEM_CONTROL_REGISTER Failed\n");
2276 return -1;
2277 }
2278
2279 return 0;
2280}
2281
2282/*****************************************************************************
2283 * mos7840_get_modem_info
2284 * function to get modem info
2285 *****************************************************************************/
2286
2287static int mos7840_get_modem_info(struct moschip_port *mos7840_port,
Al Viro97c49652006-10-09 20:29:03 +01002288 unsigned int __user *value)
Paul B Schroeder3f542972006-08-31 19:41:47 -05002289{
2290 unsigned int result = 0;
2291 __u16 msr;
2292 unsigned int mcr = mos7840_port->shadowMCR;
2293 int status = 0;
2294 status =
2295 mos7840_get_uart_reg(mos7840_port->port, MODEM_STATUS_REGISTER,
2296 &msr);
2297 result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) /* 0x002 */
2298 |((mcr & MCR_RTS) ? TIOCM_RTS : 0) /* 0x004 */
2299 |((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0) /* 0x020 */
2300 |((msr & MOS7840_MSR_CD) ? TIOCM_CAR : 0) /* 0x040 */
2301 |((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0) /* 0x080 */
2302 |((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0); /* 0x100 */
2303
2304 dbg("%s -- %x", __FUNCTION__, result);
2305
2306 if (copy_to_user(value, &result, sizeof(int)))
2307 return -EFAULT;
2308 return 0;
2309}
2310
2311/*****************************************************************************
2312 * mos7840_get_serial_info
2313 * function to get information about serial port
2314 *****************************************************************************/
2315
2316static int mos7840_get_serial_info(struct moschip_port *mos7840_port,
Al Viro97c49652006-10-09 20:29:03 +01002317 struct serial_struct __user *retinfo)
Paul B Schroeder3f542972006-08-31 19:41:47 -05002318{
2319 struct serial_struct tmp;
2320
2321 if (mos7840_port == NULL)
2322 return -1;
2323
2324 if (!retinfo)
2325 return -EFAULT;
2326
2327 memset(&tmp, 0, sizeof(tmp));
2328
2329 tmp.type = PORT_16550A;
2330 tmp.line = mos7840_port->port->serial->minor;
2331 tmp.port = mos7840_port->port->number;
2332 tmp.irq = 0;
2333 tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
2334 tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE;
2335 tmp.baud_base = 9600;
2336 tmp.close_delay = 5 * HZ;
2337 tmp.closing_wait = 30 * HZ;
2338
2339 if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
2340 return -EFAULT;
2341 return 0;
2342}
2343
2344/*****************************************************************************
2345 * SerialIoctl
2346 * this function handles any ioctl calls to the driver
2347 *****************************************************************************/
2348
2349static int mos7840_ioctl(struct usb_serial_port *port, struct file *file,
2350 unsigned int cmd, unsigned long arg)
2351{
Al Viro97c49652006-10-09 20:29:03 +01002352 void __user *argp = (void __user *)arg;
Paul B Schroeder3f542972006-08-31 19:41:47 -05002353 struct moschip_port *mos7840_port;
2354 struct tty_struct *tty;
2355
2356 struct async_icount cnow;
2357 struct async_icount cprev;
2358 struct serial_icounter_struct icount;
2359 int mosret = 0;
Paul B Schroeder3f542972006-08-31 19:41:47 -05002360
2361 if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
2362 dbg("%s", "Invalid port \n");
2363 return -1;
2364 }
2365
2366 mos7840_port = mos7840_get_port_private(port);
Paul B Schroeder3f542972006-08-31 19:41:47 -05002367
2368 if (mos7840_port == NULL)
2369 return -1;
2370
Adrian Bunkad180272006-10-09 01:16:32 +02002371 tty = mos7840_port->port->tty;
2372
Paul B Schroeder3f542972006-08-31 19:41:47 -05002373 dbg("%s - port %d, cmd = 0x%x", __FUNCTION__, port->number, cmd);
2374
2375 switch (cmd) {
2376 /* return number of bytes available */
2377
Paul B Schroeder3f542972006-08-31 19:41:47 -05002378 case TIOCSERGETLSR:
2379 dbg("%s (%d) TIOCSERGETLSR", __FUNCTION__, port->number);
Al Viro97c49652006-10-09 20:29:03 +01002380 return mos7840_get_lsr_info(mos7840_port, argp);
Paul B Schroeder3f542972006-08-31 19:41:47 -05002381 return 0;
2382
2383 case TIOCMBIS:
2384 case TIOCMBIC:
2385 case TIOCMSET:
2386 dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __FUNCTION__,
2387 port->number);
2388 mosret =
Al Viro97c49652006-10-09 20:29:03 +01002389 mos7840_set_modem_info(mos7840_port, cmd, argp);
Paul B Schroeder3f542972006-08-31 19:41:47 -05002390 return mosret;
2391
2392 case TIOCMGET:
2393 dbg("%s (%d) TIOCMGET", __FUNCTION__, port->number);
Al Viro97c49652006-10-09 20:29:03 +01002394 return mos7840_get_modem_info(mos7840_port, argp);
Paul B Schroeder3f542972006-08-31 19:41:47 -05002395
2396 case TIOCGSERIAL:
2397 dbg("%s (%d) TIOCGSERIAL", __FUNCTION__, port->number);
Al Viro97c49652006-10-09 20:29:03 +01002398 return mos7840_get_serial_info(mos7840_port, argp);
Paul B Schroeder3f542972006-08-31 19:41:47 -05002399
2400 case TIOCSSERIAL:
2401 dbg("%s (%d) TIOCSSERIAL", __FUNCTION__, port->number);
2402 break;
2403
2404 case TIOCMIWAIT:
2405 dbg("%s (%d) TIOCMIWAIT", __FUNCTION__, port->number);
2406 cprev = mos7840_port->icount;
2407 while (1) {
2408 //interruptible_sleep_on(&mos7840_port->delta_msr_wait);
2409 mos7840_port->delta_msr_cond = 0;
2410 wait_event_interruptible(mos7840_port->delta_msr_wait,
2411 (mos7840_port->
2412 delta_msr_cond == 1));
2413
2414 /* see if a signal did it */
2415 if (signal_pending(current))
2416 return -ERESTARTSYS;
2417 cnow = mos7840_port->icount;
Oliver Neukum0de9a702007-03-16 20:28:28 +01002418 smp_rmb();
Paul B Schroeder3f542972006-08-31 19:41:47 -05002419 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
2420 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
2421 return -EIO; /* no change => error */
2422 if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
2423 ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
2424 ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
2425 ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
2426 return 0;
2427 }
2428 cprev = cnow;
2429 }
2430 /* NOTREACHED */
2431 break;
2432
2433 case TIOCGICOUNT:
2434 cnow = mos7840_port->icount;
Oliver Neukum0de9a702007-03-16 20:28:28 +01002435 smp_rmb();
Paul B Schroeder3f542972006-08-31 19:41:47 -05002436 icount.cts = cnow.cts;
2437 icount.dsr = cnow.dsr;
2438 icount.rng = cnow.rng;
2439 icount.dcd = cnow.dcd;
2440 icount.rx = cnow.rx;
2441 icount.tx = cnow.tx;
2442 icount.frame = cnow.frame;
2443 icount.overrun = cnow.overrun;
2444 icount.parity = cnow.parity;
2445 icount.brk = cnow.brk;
2446 icount.buf_overrun = cnow.buf_overrun;
2447
2448 dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__,
2449 port->number, icount.rx, icount.tx);
Al Viro97c49652006-10-09 20:29:03 +01002450 if (copy_to_user(argp, &icount, sizeof(icount)))
Paul B Schroeder3f542972006-08-31 19:41:47 -05002451 return -EFAULT;
2452 return 0;
2453
2454 case TIOCEXBAUD:
2455 return 0;
2456 default:
2457 break;
2458 }
2459
2460 return -ENOIOCTLCMD;
2461}
2462
2463static int mos7840_calc_num_ports(struct usb_serial *serial)
2464{
Oliver Neukum0de9a702007-03-16 20:28:28 +01002465 int mos7840_num_ports = 0;
Paul B Schroeder3f542972006-08-31 19:41:47 -05002466
2467 dbg("numberofendpoints: %d \n",
2468 (int)serial->interface->cur_altsetting->desc.bNumEndpoints);
2469 dbg("numberofendpoints: %d \n",
2470 (int)serial->interface->altsetting->desc.bNumEndpoints);
2471 if (serial->interface->cur_altsetting->desc.bNumEndpoints == 5) {
Oliver Neukum0de9a702007-03-16 20:28:28 +01002472 mos7840_num_ports = serial->num_ports = 2;
Paul B Schroeder3f542972006-08-31 19:41:47 -05002473 } else if (serial->interface->cur_altsetting->desc.bNumEndpoints == 9) {
Oliver Neukum0de9a702007-03-16 20:28:28 +01002474 serial->num_bulk_in = 4;
2475 serial->num_bulk_out = 4;
2476 mos7840_num_ports = serial->num_ports = 4;
Paul B Schroeder3f542972006-08-31 19:41:47 -05002477 }
2478
2479 return mos7840_num_ports;
2480}
2481
2482/****************************************************************************
2483 * mos7840_startup
2484 ****************************************************************************/
2485
2486static int mos7840_startup(struct usb_serial *serial)
2487{
2488 struct moschip_port *mos7840_port;
2489 struct usb_device *dev;
2490 int i, status;
2491
2492 __u16 Data;
2493 dbg("%s \n", " mos7840_startup :entering..........");
2494
2495 if (!serial) {
2496 dbg("%s\n", "Invalid Handler");
2497 return -1;
2498 }
2499
2500 dev = serial->dev;
2501
2502 dbg("%s\n", "Entering...");
2503
2504 /* we set up the pointers to the endpoints in the mos7840_open *
2505 * function, as the structures aren't created yet. */
2506
2507 /* set up port private structures */
2508 for (i = 0; i < serial->num_ports; ++i) {
Burman Yan7ac9da12006-11-22 20:54:38 +02002509 mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
Paul B Schroeder3f542972006-08-31 19:41:47 -05002510 if (mos7840_port == NULL) {
2511 err("%s - Out of memory", __FUNCTION__);
Oliver Neukum0de9a702007-03-16 20:28:28 +01002512 status = -ENOMEM;
2513 i--; /* don't follow NULL pointer cleaning up */
2514 goto error;
Paul B Schroeder3f542972006-08-31 19:41:47 -05002515 }
Paul B Schroeder3f542972006-08-31 19:41:47 -05002516
2517 /* Initialize all port interrupt end point to port 0 int endpoint *
2518 * Our device has only one interrupt end point comman to all port */
2519
2520 mos7840_port->port = serial->port[i];
2521 mos7840_set_port_private(serial->port[i], mos7840_port);
Oliver Neukum0de9a702007-03-16 20:28:28 +01002522 spin_lock_init(&mos7840_port->pool_lock);
Paul B Schroeder3f542972006-08-31 19:41:47 -05002523
2524 mos7840_port->port_num = ((serial->port[i]->number -
2525 (serial->port[i]->serial->minor)) +
2526 1);
2527
2528 if (mos7840_port->port_num == 1) {
2529 mos7840_port->SpRegOffset = 0x0;
2530 mos7840_port->ControlRegOffset = 0x1;
2531 mos7840_port->DcrRegOffset = 0x4;
2532 } else if ((mos7840_port->port_num == 2)
Oliver Neukum0de9a702007-03-16 20:28:28 +01002533 && (serial->num_ports == 4)) {
Paul B Schroeder3f542972006-08-31 19:41:47 -05002534 mos7840_port->SpRegOffset = 0x8;
2535 mos7840_port->ControlRegOffset = 0x9;
2536 mos7840_port->DcrRegOffset = 0x16;
2537 } else if ((mos7840_port->port_num == 2)
Oliver Neukum0de9a702007-03-16 20:28:28 +01002538 && (serial->num_ports == 2)) {
Paul B Schroeder3f542972006-08-31 19:41:47 -05002539 mos7840_port->SpRegOffset = 0xa;
2540 mos7840_port->ControlRegOffset = 0xb;
2541 mos7840_port->DcrRegOffset = 0x19;
2542 } else if ((mos7840_port->port_num == 3)
Oliver Neukum0de9a702007-03-16 20:28:28 +01002543 && (serial->num_ports == 4)) {
Paul B Schroeder3f542972006-08-31 19:41:47 -05002544 mos7840_port->SpRegOffset = 0xa;
2545 mos7840_port->ControlRegOffset = 0xb;
2546 mos7840_port->DcrRegOffset = 0x19;
2547 } else if ((mos7840_port->port_num == 4)
Oliver Neukum0de9a702007-03-16 20:28:28 +01002548 && (serial->num_ports == 4)) {
Paul B Schroeder3f542972006-08-31 19:41:47 -05002549 mos7840_port->SpRegOffset = 0xc;
2550 mos7840_port->ControlRegOffset = 0xd;
2551 mos7840_port->DcrRegOffset = 0x1c;
2552 }
2553 mos7840_dump_serial_port(mos7840_port);
2554
2555 mos7840_set_port_private(serial->port[i], mos7840_port);
2556
2557 //enable rx_disable bit in control register
2558
2559 status =
2560 mos7840_get_reg_sync(serial->port[i],
2561 mos7840_port->ControlRegOffset, &Data);
2562 if (status < 0) {
2563 dbg("Reading ControlReg failed status-0x%x\n", status);
2564 break;
2565 } else
2566 dbg("ControlReg Reading success val is %x, status%d\n",
2567 Data, status);
2568 Data |= 0x08; //setting driver done bit
2569 Data |= 0x04; //sp1_bit to have cts change reflect in modem status reg
2570
2571 //Data |= 0x20; //rx_disable bit
2572 status = 0;
2573 status =
2574 mos7840_set_reg_sync(serial->port[i],
2575 mos7840_port->ControlRegOffset, Data);
2576 if (status < 0) {
2577 dbg("Writing ControlReg failed(rx_disable) status-0x%x\n", status);
2578 break;
2579 } else
2580 dbg("ControlReg Writing success(rx_disable) status%d\n",
2581 status);
2582
2583 //Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2 and 0x24 in DCR3
2584 Data = 0x01;
2585 status = 0;
2586 status =
2587 mos7840_set_reg_sync(serial->port[i],
2588 (__u16) (mos7840_port->DcrRegOffset +
2589 0), Data);
2590 if (status < 0) {
2591 dbg("Writing DCR0 failed status-0x%x\n", status);
2592 break;
2593 } else
2594 dbg("DCR0 Writing success status%d\n", status);
2595
2596 Data = 0x05;
2597 status = 0;
2598 status =
2599 mos7840_set_reg_sync(serial->port[i],
2600 (__u16) (mos7840_port->DcrRegOffset +
2601 1), Data);
2602 if (status < 0) {
2603 dbg("Writing DCR1 failed status-0x%x\n", status);
2604 break;
2605 } else
2606 dbg("DCR1 Writing success status%d\n", status);
2607
2608 Data = 0x24;
2609 status = 0;
2610 status =
2611 mos7840_set_reg_sync(serial->port[i],
2612 (__u16) (mos7840_port->DcrRegOffset +
2613 2), Data);
2614 if (status < 0) {
2615 dbg("Writing DCR2 failed status-0x%x\n", status);
2616 break;
2617 } else
2618 dbg("DCR2 Writing success status%d\n", status);
2619
2620 // write values in clkstart0x0 and clkmulti 0x20
2621 Data = 0x0;
2622 status = 0;
2623 status =
2624 mos7840_set_reg_sync(serial->port[i],
2625 CLK_START_VALUE_REGISTER, Data);
2626 if (status < 0) {
2627 dbg("Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
2628 break;
2629 } else
2630 dbg("CLK_START_VALUE_REGISTER Writing success status%d\n", status);
2631
2632 Data = 0x20;
Paul B Schroeder3f542972006-08-31 19:41:47 -05002633 status =
2634 mos7840_set_reg_sync(serial->port[i], CLK_MULTI_REGISTER,
2635 Data);
2636 if (status < 0) {
2637 dbg("Writing CLK_MULTI_REGISTER failed status-0x%x\n",
2638 status);
Oliver Neukum0de9a702007-03-16 20:28:28 +01002639 goto error;
Paul B Schroeder3f542972006-08-31 19:41:47 -05002640 } else
2641 dbg("CLK_MULTI_REGISTER Writing success status%d\n",
2642 status);
2643
2644 //write value 0x0 to scratchpad register
2645 Data = 0x00;
Paul B Schroeder3f542972006-08-31 19:41:47 -05002646 status =
2647 mos7840_set_uart_reg(serial->port[i], SCRATCH_PAD_REGISTER,
2648 Data);
2649 if (status < 0) {
2650 dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x\n",
2651 status);
2652 break;
2653 } else
2654 dbg("SCRATCH_PAD_REGISTER Writing success status%d\n",
2655 status);
2656
2657 //Zero Length flag register
2658 if ((mos7840_port->port_num != 1)
Oliver Neukum0de9a702007-03-16 20:28:28 +01002659 && (serial->num_ports == 2)) {
Paul B Schroeder3f542972006-08-31 19:41:47 -05002660
2661 Data = 0xff;
2662 status = 0;
2663 status = mos7840_set_reg_sync(serial->port[i],
2664 (__u16) (ZLP_REG1 +
2665 ((__u16)
2666 mos7840_port->
2667 port_num)),
2668 Data);
2669 dbg("ZLIP offset%x\n",
2670 (__u16) (ZLP_REG1 +
2671 ((__u16) mos7840_port->port_num)));
2672 if (status < 0) {
2673 dbg("Writing ZLP_REG%d failed status-0x%x\n",
2674 i + 2, status);
2675 break;
2676 } else
2677 dbg("ZLP_REG%d Writing success status%d\n",
2678 i + 2, status);
2679 } else {
2680 Data = 0xff;
2681 status = 0;
2682 status = mos7840_set_reg_sync(serial->port[i],
2683 (__u16) (ZLP_REG1 +
2684 ((__u16)
2685 mos7840_port->
2686 port_num) -
2687 0x1), Data);
2688 dbg("ZLIP offset%x\n",
2689 (__u16) (ZLP_REG1 +
2690 ((__u16) mos7840_port->port_num) - 0x1));
2691 if (status < 0) {
2692 dbg("Writing ZLP_REG%d failed status-0x%x\n",
2693 i + 1, status);
2694 break;
2695 } else
2696 dbg("ZLP_REG%d Writing success status%d\n",
2697 i + 1, status);
2698
2699 }
Oliver Neukum0de9a702007-03-16 20:28:28 +01002700 mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL);
Paul B Schroeder3f542972006-08-31 19:41:47 -05002701 mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
Oliver Neukum0de9a702007-03-16 20:28:28 +01002702 mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
2703 if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf || !mos7840_port->dr) {
2704 status = -ENOMEM;
2705 goto error;
2706 }
Paul B Schroeder3f542972006-08-31 19:41:47 -05002707 }
2708
2709 //Zero Length flag enable
2710 Data = 0x0f;
Paul B Schroeder3f542972006-08-31 19:41:47 -05002711 status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
2712 if (status < 0) {
2713 dbg("Writing ZLP_REG5 failed status-0x%x\n", status);
2714 return -1;
2715 } else
2716 dbg("ZLP_REG5 Writing success status%d\n", status);
2717
2718 /* setting configuration feature to one */
2719 usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
Al Viro97c49652006-10-09 20:29:03 +01002720 (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5 * HZ);
Paul B Schroeder3f542972006-08-31 19:41:47 -05002721 return 0;
Oliver Neukum0de9a702007-03-16 20:28:28 +01002722error:
2723 for (/* nothing */; i >= 0; i--) {
2724 mos7840_port = mos7840_get_port_private(serial->port[i]);
2725
2726 kfree(mos7840_port->dr);
2727 kfree(mos7840_port->ctrl_buf);
2728 usb_free_urb(mos7840_port->control_urb);
2729 kfree(mos7840_port);
2730 serial->port[i] = NULL;
2731 }
2732 return status;
Paul B Schroeder3f542972006-08-31 19:41:47 -05002733}
2734
2735/****************************************************************************
2736 * mos7840_shutdown
2737 * This function is called whenever the device is removed from the usb bus.
2738 ****************************************************************************/
2739
2740static void mos7840_shutdown(struct usb_serial *serial)
2741{
2742 int i;
Oliver Neukum0de9a702007-03-16 20:28:28 +01002743 unsigned long flags;
Paul B Schroeder3f542972006-08-31 19:41:47 -05002744 struct moschip_port *mos7840_port;
2745 dbg("%s \n", " shutdown :entering..........");
2746
2747 if (!serial) {
2748 dbg("%s", "Invalid Handler \n");
2749 return;
2750 }
2751
2752 /* check for the ports to be closed,close the ports and disconnect */
2753
2754 /* free private structure allocated for serial port *
2755 * stop reads and writes on all ports */
2756
2757 for (i = 0; i < serial->num_ports; ++i) {
2758 mos7840_port = mos7840_get_port_private(serial->port[i]);
Oliver Neukum0de9a702007-03-16 20:28:28 +01002759 spin_lock_irqsave(&mos7840_port->pool_lock, flags);
2760 mos7840_port->zombie = 1;
2761 spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
Paul B Schroeder3f542972006-08-31 19:41:47 -05002762 usb_kill_urb(mos7840_port->control_urb);
Oliver Neukum0de9a702007-03-16 20:28:28 +01002763 kfree(mos7840_port->ctrl_buf);
2764 kfree(mos7840_port->dr);
Paul B Schroeder3f542972006-08-31 19:41:47 -05002765 kfree(mos7840_port);
2766 mos7840_set_port_private(serial->port[i], NULL);
2767 }
2768
2769 dbg("%s\n", "Thank u :: ");
2770
2771}
2772
Johannes Hölzld9b1b782006-12-17 21:50:24 +01002773static struct usb_driver io_driver = {
2774 .name = "mos7840",
2775 .probe = usb_serial_probe,
2776 .disconnect = usb_serial_disconnect,
2777 .id_table = moschip_id_table_combined,
2778 .no_dynamic_id = 1,
2779};
2780
Paul B Schroeder3f542972006-08-31 19:41:47 -05002781static struct usb_serial_driver moschip7840_4port_device = {
2782 .driver = {
2783 .owner = THIS_MODULE,
2784 .name = "mos7840",
2785 },
2786 .description = DRIVER_DESC,
Johannes Hölzld9b1b782006-12-17 21:50:24 +01002787 .usb_driver = &io_driver,
Paul B Schroeder3f542972006-08-31 19:41:47 -05002788 .id_table = moschip_port_id_table,
2789 .num_interrupt_in = 1, //NUM_DONT_CARE,//1,
2790#ifdef check
2791 .num_bulk_in = 4,
2792 .num_bulk_out = 4,
2793 .num_ports = 4,
2794#endif
2795 .open = mos7840_open,
2796 .close = mos7840_close,
2797 .write = mos7840_write,
2798 .write_room = mos7840_write_room,
2799 .chars_in_buffer = mos7840_chars_in_buffer,
2800 .throttle = mos7840_throttle,
2801 .unthrottle = mos7840_unthrottle,
2802 .calc_num_ports = mos7840_calc_num_ports,
2803#ifdef MCSSerialProbe
2804 .probe = mos7840_serial_probe,
2805#endif
2806 .ioctl = mos7840_ioctl,
2807 .set_termios = mos7840_set_termios,
2808 .break_ctl = mos7840_break,
2809 .tiocmget = mos7840_tiocmget,
2810 .tiocmset = mos7840_tiocmset,
2811 .attach = mos7840_startup,
2812 .shutdown = mos7840_shutdown,
2813 .read_bulk_callback = mos7840_bulk_in_callback,
2814 .read_int_callback = mos7840_interrupt_callback,
2815};
2816
Paul B Schroeder3f542972006-08-31 19:41:47 -05002817/****************************************************************************
2818 * moschip7840_init
2819 * This is called by the module subsystem, or on startup to initialize us
2820 ****************************************************************************/
2821static int __init moschip7840_init(void)
2822{
2823 int retval;
2824
2825 dbg("%s \n", " mos7840_init :entering..........");
2826
2827 /* Register with the usb serial */
2828 retval = usb_serial_register(&moschip7840_4port_device);
2829
2830 if (retval)
2831 goto failed_port_device_register;
2832
2833 dbg("%s\n", "Entring...");
2834 info(DRIVER_DESC " " DRIVER_VERSION);
2835
2836 /* Register with the usb */
2837 retval = usb_register(&io_driver);
2838
2839 if (retval)
2840 goto failed_usb_register;
2841
2842 if (retval == 0) {
2843 dbg("%s\n", "Leaving...");
2844 return 0;
2845 }
2846
2847 failed_usb_register:
2848 usb_serial_deregister(&moschip7840_4port_device);
2849
2850 failed_port_device_register:
2851
2852 return retval;
2853}
2854
2855/****************************************************************************
2856 * moschip7840_exit
2857 * Called when the driver is about to be unloaded.
2858 ****************************************************************************/
2859static void __exit moschip7840_exit(void)
2860{
2861
2862 dbg("%s \n", " mos7840_exit :entering..........");
2863
2864 usb_deregister(&io_driver);
2865
2866 usb_serial_deregister(&moschip7840_4port_device);
2867
2868 dbg("%s\n", "Entring...");
2869}
2870
2871module_init(moschip7840_init);
2872module_exit(moschip7840_exit);
2873
2874/* Module information */
2875MODULE_DESCRIPTION(DRIVER_DESC);
2876MODULE_LICENSE("GPL");
2877
2878module_param(debug, bool, S_IRUGO | S_IWUSR);
2879MODULE_PARM_DESC(debug, "Debug enabled or not");