Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm / 3de31551403af9320a3a2bf578227f145287c920 / . / arch / arm / mach-msm / Kconfig
blob: 0eecffd2573837e4e6b421e9f8c2706710654a4d [file] [log] [blame]
Brian Swetland1637de02008-09-09 07:13:33 -0700[diff] [blame]1if ARCH_MSM
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]2
Stepan Moskovchenko1cd286f2011-08-03 19:03:02 -0700[diff] [blame]3menu "MSM SoC Type"
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]4
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]5config ARCH_MSM7X01A
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]6 bool "MSM7x00A / MSM7x01A"
7 select ARCH_MSM_ARM11
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]8 select MSM_VIC
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]9 select CPU_V6
David Brown74d10d72011-05-16 13:57:39 -0700[diff] [blame]10 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]11 select MSM_REMOTE_SPINLOCK_SWP
12
13config ARCH_MSM7X25
14 bool "MSM7x25"
15 select ARCH_MSM_ARM11
16 select MSM_VIC
17 select CPU_V6
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]18 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]19 select MSM_REMOTE_SPINLOCK_SWP
Taniya Dasbe561a02011-10-12 09:53:11 +0530[diff] [blame]20 select MULTI_IRQ_HANDLER
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]21
22config ARCH_MSM7X27
23 bool "MSM7x27"
24 select ARCH_MSM_ARM11 if MSM_SOC_REV_NONE
Trilok Soni7ff06e02012-10-15 01:05:24 +0530[diff] [blame]25 select ARCH_HAS_BARRIERS
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]26 select ARCH_MSM_CORTEX_A5 if MSM_SOC_REV_A
27 select MSM_VIC
28 select CPU_V6 if MSM_SOC_REV_NONE
29 select CPU_V7 if MSM_SOC_REV_A
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]30 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]31 select MSM_REMOTE_SPINLOCK_SWP if MSM_SOC_REV_NONE
32 select MSM_GPIOMUX
33 select REGULATOR
Taniya Dasbe561a02011-10-12 09:53:11 +0530[diff] [blame]34 select MULTI_IRQ_HANDLER
Pankaj Kumar75c86fd2011-10-01 18:51:09 +0530[diff] [blame]35 select MSM_PROC_COMM_REGULATOR
Laura Abbott1fbd2e62011-12-18 10:26:46 -0800[diff] [blame]36 select CLEANCACHE
37 select QCACHE
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]38 select MSM_PM2 if PM
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]39 select MSM_RUN_QUEUE_STATS if MSM_SOC_REV_A
Taniya Dasd4c39f92012-05-14 17:41:49 +0530[diff] [blame]40 select DONT_MAP_HOLE_AFTER_MEMBANK0
Trilok Sonib856ab92012-06-26 14:33:28 +0530[diff] [blame]41 select MIGHT_HAVE_CACHE_L2X0
Taniya Dascd1d0232012-07-03 17:50:47 +0530[diff] [blame]42 select MSM_MODEM_RESTART
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]43
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]44config ARCH_MSM7X30
45 bool "MSM7x30"
46 select ARCH_MSM_SCORPION
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]47 select MSM_VIC
48 select CPU_V7
David Brown74d10d72011-05-16 13:57:39 -0700[diff] [blame]49 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]50 select MSM_REMOTE_SPINLOCK_DEKKERS
51 select ARCH_SPARSEMEM_ENABLE
Laura Abbott78593b52011-09-26 18:48:14 -0700[diff] [blame]52 select ARCH_HAS_HOLES_MEMORYMODEL
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]53 select MIGRATION
Gregory Beanab78cde2010-09-01 16:26:12 -0700[diff] [blame]54 select MSM_GPIOMUX
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]55 select RESERVE_FIRST_PAGE
56 select MSM_DALRPC
57 select MSM_SPM_V1
58 select REGULATOR
Justin Paupore637a25d2011-07-14 17:11:04 -0700[diff] [blame]59 select MSM_PROC_COMM_REGULATOR
Taniya Dasbae99fb2011-10-12 09:55:13 +0530[diff] [blame]60 select MULTI_IRQ_HANDLER
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]61 select MSM_PM2 if PM
Chintan Pandyabb021762012-06-21 15:03:29 +0530[diff] [blame]62 select HOLES_IN_ZONE if SPARSEMEM
Taniya Dascd1d0232012-07-03 17:50:47 +0530[diff] [blame]63 select MSM_MODEM_RESTART
Chintan Pandya62a2f7c2012-10-30 12:00:40 +0530[diff] [blame]64 select ARM_HAS_SG_CHAIN
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]65
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]66config ARCH_QSD8X50
67 bool "QSD8X50"
68 select ARCH_MSM_SCORPION
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]69 select MSM_VIC
70 select CPU_V7
David Brown74d10d72011-05-16 13:57:39 -0700[diff] [blame]71 select GPIO_MSM_V1
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]72 select MSM_REMOTE_SPINLOCK_LDREX
73 select CPU_USE_DOMAINS
74 select EMULATE_DOMAIN_MANAGER_V7
Gregory Beanab78cde2010-09-01 16:26:12 -0700[diff] [blame]75 select MSM_GPIOMUX
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]76 select MSM_DALRPC
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]77 select MSM_PM2 if PM
Taniya Dascd1d0232012-07-03 17:50:47 +0530[diff] [blame]78 select MSM_MODEM_RESTART
Daniel Walker46fe5f22010-08-18 11:00:25 -0700[diff] [blame]79
Jeff Ohlstein569fb6e2010-08-12 13:02:56 -0700[diff] [blame]80config ARCH_MSM8X60
81 bool "MSM8X60"
Jeff Ohlsteine14411d2010-11-30 13:06:36 -0800[diff] [blame]82 select ARCH_MSM_SCORPIONMP
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]83 select SMP_PARALLEL_START if SMP
Jeff Ohlstein569fb6e2010-08-12 13:02:56 -0700[diff] [blame]84 select ARM_GIC
85 select CPU_V7
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]86 select MSM_REMOTE_SPINLOCK_LDREX
87 select ARCH_REQUIRE_GPIOLIB
88 select MSM_ADM3
89 select REGULATOR
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]90 select MSM_RPM_REGULATOR
David Brown1a5ab4b2011-05-16 15:53:38 -0700[diff] [blame]91 select GPIO_MSM_V2
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]92 select MSM_PIL
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]93 select ARCH_HAS_CPU_IDLE_WAIT
94 select MSM_DIRECT_SCLK_ACCESS
95 select MSM_RPM
96 select MSM_XO
Jeff Ohlstein569fb6e2010-08-12 13:02:56 -0700[diff] [blame]97 select MSM_GPIOMUX
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]98 select MSM_BUS_SCALING
99 select MSM_SECURE_IO
100 select MSM_DALRPC
101 select MSM_QDSP6_APR
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]102 select MSM_QDSP6_CODECS
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]103 select MSM_NATIVE_RESTART
104 select ARCH_INLINE_SPIN_TRYLOCK
105 select ARCH_INLINE_SPIN_TRYLOCK_BH
106 select ARCH_INLINE_SPIN_LOCK
107 select ARCH_INLINE_SPIN_LOCK_BH
108 select ARCH_INLINE_SPIN_LOCK_IRQ
109 select ARCH_INLINE_SPIN_LOCK_IRQSAVE
110 select ARCH_INLINE_SPIN_UNLOCK
111 select ARCH_INLINE_SPIN_UNLOCK_BH
112 select ARCH_INLINE_SPIN_UNLOCK_IRQ
113 select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE
114 select ARCH_INLINE_READ_TRYLOCK
115 select ARCH_INLINE_READ_LOCK
116 select ARCH_INLINE_READ_LOCK_BH
117 select ARCH_INLINE_READ_LOCK_IRQ
118 select ARCH_INLINE_READ_LOCK_IRQSAVE
119 select ARCH_INLINE_READ_UNLOCK
120 select ARCH_INLINE_READ_UNLOCK_BH
121 select ARCH_INLINE_READ_UNLOCK_IRQ
122 select ARCH_INLINE_READ_UNLOCK_IRQRESTORE
123 select ARCH_INLINE_WRITE_TRYLOCK
124 select ARCH_INLINE_WRITE_LOCK
125 select ARCH_INLINE_WRITE_LOCK_BH
126 select ARCH_INLINE_WRITE_LOCK_IRQ
127 select ARCH_INLINE_WRITE_LOCK_IRQSAVE
128 select ARCH_INLINE_WRITE_UNLOCK
129 select ARCH_INLINE_WRITE_UNLOCK_BH
130 select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
131 select CPU_HAS_L2_PMU
132 select MSM_SPM_V1
Stephen Boyd2a1eb582010-08-27 10:01:23 -0700[diff] [blame]133 select MSM_SCM if SMP
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]134 select MULTI_IRQ_HANDLER
Laura Abbott46505f62011-11-02 18:06:55 -0700[diff] [blame]135 select MSM_MULTIMEDIA_USE_ION
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]136 select MSM_PM8X60 if PM
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]137 select MSM_RUN_QUEUE_STATS
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]138 select ARM_HAS_SG_CHAIN
Sidipotu Ashokbf84d4d2012-11-06 17:13:28 +0530[diff] [blame]139 select USE_DEV_CTRL_VOLUME
Jeff Ohlstein569fb6e2010-08-12 13:02:56 -0700[diff] [blame]140
Stepan Moskovchenkof441ca22010-12-01 19:31:16 -0800[diff] [blame]141config ARCH_MSM8960
142 bool "MSM8960"
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]143 select ARCH_MSM_KRAITMP
Stepan Moskovchenkof441ca22010-12-01 19:31:16 -0800[diff] [blame]144 select ARM_GIC
145 select CPU_V7
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]146 select GPIO_MSM_V2
Stepan Moskovchenkof441ca22010-12-01 19:31:16 -0800[diff] [blame]147 select MSM_GPIOMUX
148 select MSM_SCM if SMP
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]149 select MSM_DIRECT_SCLK_ACCESS
150 select REGULATOR
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]151 select MSM_RPM_REGULATOR
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]152 select MSM_RPM
153 select MSM_XO
154 select MSM_QDSP6_APR
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]155 select MSM_QDSP6_CODECS
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]156 select MSM_PIL
157 select MSM_AUDIO_QDSP6 if SND_SOC
158 select CPU_HAS_L2_PMU
159 select MSM_SPM_V2
160 select MSM_L2_SPM
161 select MSM_NATIVE_RESTART
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]162 select DONT_MAP_HOLE_AFTER_MEMBANK0
163 select MSM_REMOTE_SPINLOCK_SFPB
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]164 select ARCH_HAS_HOLES_MEMORYMODEL
Larry Basseld4d82c92011-12-07 09:52:49 -0800[diff] [blame]165 select CLEANCACHE
166 select QCACHE
Laura Abbott6d61a912011-10-27 16:44:14 -0700[diff] [blame]167 select MSM_MULTIMEDIA_USE_ION
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]168 select MULTI_IRQ_HANDLER
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]169 select MSM_PM8X60 if PM
Laura Abbott085dd202012-03-30 14:02:34 -0700[diff] [blame]170 select HOLES_IN_ZONE if SPARSEMEM
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]171 select MSM_RUN_QUEUE_STATS
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]172 select ARM_HAS_SG_CHAIN
Stepan Moskovchenko196f86e2012-07-13 20:40:46 -0700[diff] [blame]173 select MSM_KRAIT_WFE_FIXUP
Baruch Eruchimovitch258b3472012-10-14 21:46:35 +0200[diff] [blame]174 select MSM_ULTRASOUND_A
Olav Haugan5e728722012-11-05 17:45:26 -0800[diff] [blame]175 select MSM_IOMMU_GPU_SYNC
Greg Reidb1d240a2012-10-12 12:20:31 -0400[diff] [blame]176 select GENERIC_TIME_VSYSCALL
177 select USE_USER_ACCESSIBLE_TIMERS
178 select ARM_USE_USER_ACCESSIBLE_TIMERS
179 select MSM_USE_USER_ACCESSIBLE_TIMERS
Jay Chokshi06e444f2012-12-06 20:48:23 -0800[diff] [blame]180 select MSM_CPU_PWRCTL
Priyanka Mathurdcaaaa9f2012-12-05 18:51:03 -0800[diff] [blame]181 select MSM_LPM_TEST
Stepan Moskovchenkof441ca22010-12-01 19:31:16 -0800[diff] [blame]182
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]183config ARCH_MSM8930
184 bool "MSM8930"
185 select ARCH_MSM_KRAITMP
186 select ARM_GIC
187 select CPU_V7
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]188 select GPIO_MSM_V2
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]189 select MSM_GPIOMUX
190 select MSM_SCM if SMP
191 select MSM_DIRECT_SCLK_ACCESS
192 select REGULATOR
David Collins5779cea2012-01-05 15:09:21 -0800[diff] [blame]193 select MSM_RPM_REGULATOR
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]194 select MSM_RPM
195 select MSM_XO
196 select MSM_QDSP6_APR
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]197 select MSM_QDSP6_CODECS
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]198 select MSM_PIL
199 select MSM_AUDIO_QDSP6 if SND_SOC
200 select CPU_HAS_L2_PMU
201 select MSM_SPM_V2
202 select MSM_L2_SPM
203 select MSM_NATIVE_RESTART
204 select DONT_MAP_HOLE_AFTER_MEMBANK0
Eric Holmbergeab10732011-09-23 19:44:43 -0600[diff] [blame]205 select MSM_REMOTE_SPINLOCK_SFPB
Larry Basself74479e2011-09-08 11:07:52 -0700[diff] [blame]206 select ARCH_HAS_HOLES_MEMORYMODEL
Baruch Eruchimovitch258b3472012-10-14 21:46:35 +0200[diff] [blame]207 select MSM_ULTRASOUND_A
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]208 select MULTI_IRQ_HANDLER
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]209 select MSM_PM8X60 if PM
Laura Abbott085dd202012-03-30 14:02:34 -0700[diff] [blame]210 select HOLES_IN_ZONE if SPARSEMEM
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]211 select ARM_HAS_SG_CHAIN
Stepan Moskovchenko196f86e2012-07-13 20:40:46 -0700[diff] [blame]212 select MSM_KRAIT_WFE_FIXUP
Olav Haugan5e728722012-11-05 17:45:26 -0800[diff] [blame]213 select MSM_IOMMU_GPU_SYNC
Greg Reidb1d240a2012-10-12 12:20:31 -0400[diff] [blame]214 select GENERIC_TIME_VSYSCALL
215 select USE_USER_ACCESSIBLE_TIMERS
216 select ARM_USE_USER_ACCESSIBLE_TIMERS
217 select MSM_USE_USER_ACCESSIBLE_TIMERS
Jay Chokshi06e444f2012-12-06 20:48:23 -0800[diff] [blame]218 select MSM_CPU_PWRCTL
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]219
220config ARCH_APQ8064
221 bool "APQ8064"
222 select ARCH_MSM_KRAITMP
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]223 select GPIO_MSM_V2
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]224 select ARM_GIC
225 select CPU_V7
226 select MSM_SCM if SMP
Joel King4ebccc62011-07-22 09:43:22 -0700[diff] [blame]227 select MSM_GPIOMUX
Eric Holmberg40d21882011-09-27 09:42:03 -0600[diff] [blame]228 select MSM_REMOTE_SPINLOCK_SFPB
Swaminathan Sathappan47e5d932011-12-05 14:48:07 -0800[diff] [blame]229 select MSM_PIL
Swaminathan Sathappan2f51a752011-12-05 12:51:19 -0800[diff] [blame]230 select MSM_QDSP6_APR
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]231 select MSM_QDSP6_CODECS
Swaminathan Sathappan2f51a752011-12-05 12:51:19 -0800[diff] [blame]232 select MSM_AUDIO_QDSP6 if SND_SOC
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]233 select MULTI_IRQ_HANDLER
Praveen Chidambaram78499012011-11-01 17:15:17 -0600[diff] [blame]234 select MSM_RPM
235 select MSM_SPM_V2
236 select MSM_L2_SPM
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]237 select MSM_PM8X60 if PM
Neil Leeder814d3d32012-01-19 17:21:43 -0500[diff] [blame]238 select CPU_HAS_L2_PMU
Laura Abbott085dd202012-03-30 14:02:34 -0700[diff] [blame]239 select HOLES_IN_ZONE if SPARSEMEM
Larry Bassel67b921d2012-04-06 10:23:27 -0700[diff] [blame]240 select CLEANCACHE
241 select QCACHE
Niranjana Vishwanathapuraf1427ac2012-05-03 14:28:21 -0600[diff] [blame]242 select MIGHT_HAVE_PCI
243 select ARCH_SUPPORTS_MSI
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]244 select ARM_HAS_SG_CHAIN
Stepan Moskovchenko196f86e2012-07-13 20:40:46 -0700[diff] [blame]245 select MSM_KRAIT_WFE_FIXUP
Baruch Eruchimovitch258b3472012-10-14 21:46:35 +0200[diff] [blame]246 select MSM_ULTRASOUND_A
Olav Haugan5e728722012-11-05 17:45:26 -0800[diff] [blame]247 select MSM_IOMMU_GPU_SYNC
Greg Reidb1d240a2012-10-12 12:20:31 -0400[diff] [blame]248 select GENERIC_TIME_VSYSCALL
249 select USE_USER_ACCESSIBLE_TIMERS
250 select ARM_USE_USER_ACCESSIBLE_TIMERS
251 select MSM_USE_USER_ACCESSIBLE_TIMERS
Jay Chokshi06e444f2012-12-06 20:48:23 -0800[diff] [blame]252 select MSM_CPU_PWRCTL
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]253
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]254config ARCH_MSM8974
255 bool "MSM8974"
Sathish Ambleyd4efc762011-10-09 22:19:22 -0700[diff] [blame]256 select ARCH_MSM_KRAITMP
Sathish Ambley4149e842012-03-23 11:53:55 -0700[diff] [blame]257 select GPIO_MSM_V3
Sathish Ambleyd4efc762011-10-09 22:19:22 -0700[diff] [blame]258 select ARM_GIC
259 select CPU_V7
260 select MSM_SCM if SMP
261 select MSM_GPIOMUX
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]262 select MULTI_IRQ_HANDLER
Olav Hauganb800c8c2012-01-30 08:50:45 -0800[diff] [blame]263 select MSM_MULTIMEDIA_USE_ION
Matt Wagantallc2bbdc32012-03-21 19:44:50 -0700[diff] [blame]264 select MSM_PIL
Praveen Chidambaramaa9d52b2012-04-02 11:09:47 -0600[diff] [blame]265 select MSM_SPM_V2
266 select MSM_L2_SPM
Stepan Moskovchenkoa000d132012-08-14 21:05:14 -0700[diff] [blame]267 select MSM_NATIVE_RESTART
268 select MSM_RESTART_V2
Praveen Chidambaram85b7b282012-04-16 13:45:15 -0600[diff] [blame]269 select MSM_PM8X60 if PM
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]270 select MAY_HAVE_SPARSE_IRQ
271 select SPARSE_IRQ
Mahesh Sivasubramaniancb668712012-04-04 13:03:25 -0600[diff] [blame]272 select MSM_RPM_SMD
David Collinsc7642322012-04-04 10:19:12 -0700[diff] [blame]273 select REGULATOR
Joonwoo Park91d95462012-08-02 10:55:54 -0700[diff] [blame]274 select MSM_QDSP6_APRV2
Harmandeep Singhe5ddfe32012-05-26 09:39:25 -0700[diff] [blame]275 select MSM_QDSP6V2_CODECS
276 select MSM_AUDIO_QDSP6V2 if SND_SOC
David Collins1c91ea72012-05-03 16:17:35 -0700[diff] [blame]277 select MSM_RPM_REGULATOR_SMD
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]278 select ARM_HAS_SG_CHAIN
Karthik Parsha404fb8f2012-07-30 19:14:05 -0700[diff] [blame]279 select MSM_RUN_QUEUE_STATS
Neeti Desai92eab922012-10-22 15:14:48 -0700[diff] [blame]280 select MEMORY_HOLE_CARVEOUT
Priyanka Mathur1af9d4b2012-10-30 14:55:44 -0700[diff] [blame]281 select MSM_RPM_STATS_LOG
Karthikeyan Ramasubramanian1edce9e2012-11-08 18:26:10 -0700[diff] [blame]282 select QMI_ENCDEC
Neeti Desai1b2cb552012-11-01 21:57:36 -0700[diff] [blame]283 select DONT_MAP_HOLE_AFTER_MEMBANK0
Baruch Eruchimovitch8c3f7802013-01-05 22:48:04 +0200[diff] [blame]284 select MSM_ULTRASOUND_B
Priyanka Mathur5d5b0a82013-01-17 10:54:29 -0800[diff] [blame]285 select MSM_LPM_TEST
Priyanka Mathur94abc462012-12-11 16:34:52 -0800[diff] [blame]286 select MSM_RPM_LOG
Laura Abbottb46c18d2013-04-12 09:36:44 -0700[diff] [blame]287 select ARCH_WANT_KMAP_ATOMIC_FLUSH
Sathish Ambleyd4efc762011-10-09 22:19:22 -0700[diff] [blame]288
Stepan Moskovchenkoe90cd652013-04-18 12:54:47 -0700[diff] [blame]289config ARCH_APQ8084
290 bool "APQ8084"
Stepan Moskovchenkob6ae7882013-01-24 15:47:18 -0800[diff] [blame]291 select ARCH_MSM_KRAITMP
292 select GPIO_MSM_V3
293 select ARM_GIC
294 select CPU_V7
295 select MSM_SCM if SMP
296 select MSM_GPIOMUX
297 select MULTI_IRQ_HANDLER
298 select MSM_NATIVE_RESTART
299 select MSM_RESTART_V2
300 select MSM_PM8X60 if PM
301 select MAY_HAVE_SPARSE_IRQ
302 select SPARSE_IRQ
303 select REGULATOR
304 select ARM_HAS_SG_CHAIN
Stepan Moskovchenko3a5ae972013-03-08 16:46:29 -0800[diff] [blame]305 select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
Laura Abbottb46c18d2013-04-12 09:36:44 -0700[diff] [blame]306 select ARCH_WANT_KMAP_ATOMIC_FLUSH
Stepan Moskovchenkob6ae7882013-01-24 15:47:18 -0800[diff] [blame]307
Ravi Kumar Vb31dbba2012-08-31 22:40:22 +0530[diff] [blame]308config ARCH_MPQ8092
309 bool "MPQ8092"
310 select ARCH_MSM_KRAITMP
311 select GPIO_MSM_V3
312 select ARM_GIC
313 select MULTI_IRQ_HANDLER
314 select CPU_V7
315 select MSM_GPIOMUX
316 select MAY_HAVE_SPARSE_IRQ
317 select SPARSE_IRQ
318 select MSM_NOPM
319
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]320config ARCH_FSM9XXX
321 bool "FSM9XXX"
322 select ARCH_MSM_SCORPION
323 select MSM_VIC
324 select CPU_V7
325 select MSM_REMOTE_SPINLOCK_LDREX
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]326 select GPIO_FSM9XXX
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]327 select MULTI_IRQ_HANDLER
Bryan Huntsman18b3c0c2011-11-23 15:12:58 -0800[diff] [blame]328 select MSM_DALRPC
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]329
Rohit Vaswaniddeb52a2011-08-16 12:26:32 -0700[diff] [blame]330config ARCH_MSM9615
331 bool "MSM9615"
332 select ARM_GIC
Taniya Dasb241bd82012-03-19 17:58:06 +0530[diff] [blame]333 select GIC_SECURE
Rohit Vaswaniddeb52a2011-08-16 12:26:32 -0700[diff] [blame]334 select ARCH_MSM_CORTEX_A5
335 select CPU_V7
Rohit Vaswani4307c842012-10-11 15:50:05 -0700[diff] [blame]336 select MIGHT_HAVE_CACHE_L2X0
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]337 select GPIO_MSM_V2
Rohit Vaswaniddeb52a2011-08-16 12:26:32 -0700[diff] [blame]338 select MSM_GPIOMUX
Praveen Chidambaramab3b1c42011-08-25 08:44:05 -0600[diff] [blame]339 select MSM_RPM
Maheshkumar Sivasubramanian738b4582011-09-06 17:26:24 -0600[diff] [blame]340 select MSM_SPM_V2
Rohit Vaswanif688fa62011-10-13 18:13:10 -0700[diff] [blame]341 select MSM_NATIVE_RESTART
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]342 select REGULATOR
343 select MSM_RPM_REGULATOR
Marc Zyngier89bdafd12011-12-22 11:39:20 +0530[diff] [blame]344 select MULTI_IRQ_HANDLER
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]345 select MSM_PM8X60 if PM
Vikram Mulukutla2021c002011-12-16 12:32:59 -0800[diff] [blame]346 select MSM_XO
Olav Haugane6a0acd2012-04-05 09:29:12 -0700[diff] [blame]347 select MSM_MULTIMEDIA_USE_ION
Shiv Maliyappanahalli9ec55e92012-01-09 14:44:59 -0800[diff] [blame]348 select MSM_QDSP6_APR
349 select MSM_AUDIO_QDSP6 if SND_SOC
Rohit Vaswaniead426f2012-01-05 20:24:52 -0800[diff] [blame]350 select FIQ
Laura Abbottb14ed962012-01-30 14:18:08 -0800[diff] [blame]351 select ARM_HAS_SG_CHAIN
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]352
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]353config ARCH_MSM8625
354 bool "MSM8625"
355 select ARCH_MSM_CORTEX_A5
356 select CPU_V7
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]357 select GPIO_MSM_V1
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]358 select MSM_GPIOMUX
359 select ARM_GIC
360 select ARCH_MSM_CORTEXMP
361 select MULTI_IRQ_HANDLER
Trilok Soni3a453992012-03-06 18:46:22 +0530[diff] [blame]362 select ARM_TICKET_LOCKS
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]363 select MSM_RUN_QUEUE_STATS
Trilok Sonib856ab92012-06-26 14:33:28 +0530[diff] [blame]364 select MIGHT_HAVE_CACHE_L2X0
Chintan Pandya3544e742012-08-30 19:39:59 +0530[diff] [blame]365 select ARM_HAS_SG_CHAIN
Ashwin Chaugule3deb6b82012-12-21 13:09:48 -0500[diff] [blame]366 select CPU_HAS_L2_PMU
Rohit Vaswanifafe2492012-04-23 18:54:12 -0700[diff] [blame]367
368config ARCH_MSM9625
369 bool "MSM9625"
370 select ARM_GIC
Abhimanyu Kapur490d20c2012-06-22 17:34:20 -0700[diff] [blame]371 select MIGHT_HAVE_CACHE_L2X0
Rohit Vaswanifafe2492012-04-23 18:54:12 -0700[diff] [blame]372 select ARCH_MSM_CORTEX_A5
Rohit Vaswanifafe2492012-04-23 18:54:12 -0700[diff] [blame]373 select CPU_V7
Abhimanyu Kapur37398ac2013-03-26 14:58:49 -0700[diff] [blame]374 select MSM_SCM
Jin Hong690e3352012-05-02 09:25:05 -0700[diff] [blame]375 select MSM_GPIOMUX
Girish Mahadevanf1c20a42012-09-19 11:44:36 -0600[diff] [blame]376 select MSM_RPM_SMD
Abhimanyu Kapur46e5e2b2012-10-02 20:45:37 -0700[diff] [blame]377 select MSM_NATIVE_RESTART
378 select MSM_RESTART_V2
Girish Mahadevan6e419562012-09-19 12:50:05 -0600[diff] [blame]379 select MSM_SPM_V2
380 select MSM_PM8X60 if PM
381 select MSM_SCM if SMP
Rohit Vaswanifafe2492012-04-23 18:54:12 -0700[diff] [blame]382 select MULTI_IRQ_HANDLER
Rohit Vaswani61cf6ef2012-07-27 13:51:48 -0700[diff] [blame]383 select GPIO_MSM_V3
David Collins1cc6e402012-09-17 16:02:24 -0700[diff] [blame]384 select MAY_HAVE_SPARSE_IRQ
385 select SPARSE_IRQ
Mitchel Humpherys92e9b8a2012-10-08 18:12:47 -0700[diff] [blame]386 select MSM_MULTIMEDIA_USE_ION
Girish Mahadevane3be9302012-11-07 16:21:52 -0700[diff] [blame]387 select MSM_RPM_STATS_LOG
Venkat Sudhir0620e982012-11-15 16:04:36 -0800[diff] [blame]388 select MSM_QDSP6_APRV2
389 select MSM_QDSP6V2_CODECS
390 select MSM_AUDIO_QDSP6V2 if SND_SOC
Ashwin Chaugule8b459cc2012-11-26 15:20:54 -0500[diff] [blame]391 select CPU_HAS_L2_PMU
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]392 select MSM_JTAG_MM if CORESIGHT_ETM
Neeti Desai5f3b0312012-11-07 11:20:03 -0800[diff] [blame]393 select MEMORY_HOLE_CARVEOUT
Priyanka Mathurdc424552013-02-22 16:30:53 -0800[diff] [blame]394 select MSM_RPM_LOG
Syed Rameez Mustafa9232e5b2012-09-21 18:22:49 -0700[diff] [blame]395
Abhimanyu Kapur17284802013-03-18 17:00:49 -0700[diff] [blame]396config ARCH_MSMKRYPTON
397 bool "MSMKRYPTON"
398 select ARM_GIC
399 select CPU_V7
400 select MSM_GPIOMUX
401 select MSM_RPM_SMD
402 select MSM_NATIVE_RESTART
403 select MSM_RESTART_V2
404 select MSM_SPM_V2
405 select MSM_PM8X60 if PM
406 select MULTI_IRQ_HANDLER
407 select GPIO_MSM_V3
408 select MAY_HAVE_SPARSE_IRQ
409 select SPARSE_IRQ
410
Syed Rameez Mustafa3971c142013-01-09 19:04:53 -0800[diff] [blame]411config ARCH_MSM8610
412 bool "MSM8610"
Syed Rameez Mustafa9232e5b2012-09-21 18:22:49 -0700[diff] [blame]413 select ARM_GIC
414 select GIC_SECURE
Syed Rameez Mustafa9232e5b2012-09-21 18:22:49 -0700[diff] [blame]415 select ARCH_MSM_CORTEXMP
416 select CPU_V7
417 select MSM_SCM if SMP
418 select MAY_HAVE_SPARSE_IRQ
419 select SPARSE_IRQ
420 select MULTI_IRQ_HANDLER
Syed Rameez Mustafafe1d1a82013-05-03 14:24:42 -0700[diff] [blame]421 select ARM_TICKET_LOCKS
Syed Rameez Mustafa9232e5b2012-09-21 18:22:49 -0700[diff] [blame]422 select GPIO_MSM_V3
423 select MSM_GPIOMUX
Hanumant Singhe4271312012-10-24 13:27:57 -0700[diff] [blame]424 select MSM_NATIVE_RESTART
425 select MSM_RESTART_V2
Arun Menon7d2f1732013-01-16 15:20:56 -0800[diff] [blame]426 select MSM_QDSP6_APRV2
427 select MSM_QDSP6V2_CODECS
428 select MSM_AUDIO_QDSP6V2 if SND_SOC
Syed Rameez Mustafa03ea34e2013-03-13 12:18:59 -0700[diff] [blame]429 select QMI_ENCDEC
Praveen Chidambaramee7b1652012-11-29 09:52:53 -0700[diff] [blame]430 select MSM_RPM_SMD
431 select MSM_SPM_V2
432 select MSM_L2_SPM
433 select MSM_PM8X60 if PM
Syed Rameez Mustafa03ea34e2013-03-13 12:18:59 -0700[diff] [blame]434 select MEMORY_HOLE_CARVEOUT
435 select DONT_MAP_HOLE_AFTER_MEMBANK0
436 select MSM_BUS_SCALING
Patrick Dalyd3ad9ff2012-11-06 11:07:27 -0800[diff] [blame]437 select CPU_FREQ_MSM
438 select CPU_FREQ
439 select CPU_FREQ_GOV_USERSPACE
440 select CPU_FREQ_GOV_ONDEMAND
Patrick Dalyd3bb1712013-04-19 19:17:48 -0700[diff] [blame]441 select CPU_FREQ_GOV_POWERSAVE
Patrick Daly9e3fca92013-01-30 13:53:57 -0800[diff] [blame]442 select MSM_PIL
Siddharth Vermaead71842013-02-27 14:25:27 -0800[diff] [blame]443 select MSM_RUN_QUEUE_STATS
Mitchel Humpherys3537e672013-03-04 20:21:19 -0800[diff] [blame]444 select ARM_HAS_SG_CHAIN
Syed Rameez Mustafa03ea34e2013-03-13 12:18:59 -0700[diff] [blame]445 select REGULATOR
446 select MSM_RPM_REGULATOR_SMD
David Collinsf2de39b2013-03-15 14:34:20 -0700[diff] [blame]447 select MSM_SPM_REGULATOR
Aparna Das258c1722013-03-28 17:20:50 -0700[diff] [blame]448 select MSM_JTAG_MM if CORESIGHT_ETM
Willie Ruande543ba2013-03-26 14:52:11 -0700[diff] [blame]449 select MSM_CPR_REGULATOR
Priyanka Mathur6e0e2112013-04-03 12:58:52 -0700[diff] [blame]450 select MSM_RPM_LOG
Priyanka Mathur6c469162013-04-03 13:04:13 -0700[diff] [blame]451 select MSM_RPM_STATS_LOG
Syed Rameez Mustafa9ee80102012-11-02 14:41:04 -0700[diff] [blame]452
453config ARCH_MSM8226
454 bool "MSM8226"
455 select ARM_GIC
456 select GIC_SECURE
Syed Rameez Mustafa9ee80102012-11-02 14:41:04 -0700[diff] [blame]457 select ARCH_MSM_CORTEXMP
458 select CPU_V7
459 select MSM_SCM if SMP
460 select MAY_HAVE_SPARSE_IRQ
461 select SPARSE_IRQ
462 select MULTI_IRQ_HANDLER
Syed Rameez Mustafafe1d1a82013-05-03 14:24:42 -0700[diff] [blame]463 select ARM_TICKET_LOCKS
Syed Rameez Mustafa9ee80102012-11-02 14:41:04 -0700[diff] [blame]464 select GPIO_MSM_V3
465 select MSM_GPIOMUX
Syed Rameez Mustafaf1bdd712012-11-20 14:56:44 -0800[diff] [blame]466 select MSM_NATIVE_RESTART
467 select MSM_RESTART_V2
Bhalchandra Gajare4e08f632012-12-18 11:54:35 -0800[diff] [blame]468 select MSM_QDSP6_APRV2
469 select MSM_QDSP6V2_CODECS
470 select MSM_AUDIO_QDSP6V2 if SND_SOC
Karthikeyan Ramasubramaniand04c8652013-01-16 09:03:51 -0700[diff] [blame]471 select QMI_ENCDEC
Praveen Chidambarama06f60d2012-11-29 09:52:53 -0700[diff] [blame]472 select MSM_RPM_SMD
473 select MSM_SPM_V2
474 select MSM_L2_SPM
475 select MSM_PM8X60 if PM
Neeti Desaibfedbd32012-11-21 13:19:36 -0800[diff] [blame]476 select MEMORY_HOLE_CARVEOUT
477 select DONT_MAP_HOLE_AFTER_MEMBANK0
Gagan Mace1ec9522013-02-01 12:10:21 -0700[diff] [blame]478 select MSM_BUS_SCALING
Syed Rameez Mustafa03ea34e2013-03-13 12:18:59 -0700[diff] [blame]479 select CPU_FREQ_MSM
480 select CPU_FREQ
481 select CPU_FREQ_GOV_USERSPACE
482 select CPU_FREQ_GOV_ONDEMAND
483 select MSM_PIL
484 select MSM_RUN_QUEUE_STATS
Mitchel Humpherys3537e672013-03-04 20:21:19 -0800[diff] [blame]485 select ARM_HAS_SG_CHAIN
David Keitelc0092e12013-03-07 12:09:48 -0800[diff] [blame]486 select REGULATOR
487 select MSM_RPM_REGULATOR_SMD
David Collinsf2de39b2013-03-15 14:34:20 -0700[diff] [blame]488 select MSM_SPM_REGULATOR
Pushkar Joshi1bea8372013-03-06 18:26:37 -0800[diff] [blame]489 select MSM_JTAG_MM if CORESIGHT_ETM
Willie Ruan679eaf32013-03-21 13:30:40 -0700[diff] [blame]490 select MSM_CPR_REGULATOR
Priyanka Mathur6e0e2112013-04-03 12:58:52 -0700[diff] [blame]491 select MSM_RPM_LOG
Priyanka Mathur6c469162013-04-03 13:04:13 -0700[diff] [blame]492 select MSM_RPM_STATS_LOG
Laura Abbottb46c18d2013-04-12 09:36:44 -0700[diff] [blame]493 select ARCH_WANT_KMAP_ATOMIC_FLUSH
Stepan Moskovchenko1cd286f2011-08-03 19:03:02 -0700[diff] [blame]494endmenu
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]495
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]496choice
497 prompt "MSM SoC Revision"
498 default MSM_SOC_REV_NONE
499config MSM_SOC_REV_NONE
500 bool "N/A"
501 select EMULATE_DOMAIN_MANAGER_V7 if ARCH_QSD8X50
502 select VERIFY_PERMISSION_FAULT if ARCH_QSD8X50
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]503config MSM_SOC_REV_A
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]504 bool "Rev. A"
505 select ARCH_MSM7X27A if ARCH_MSM7X27
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]506endchoice
507
Stepan Moskovchenko00da0742011-07-08 14:06:44 -0700[diff] [blame]508config MSM_KRAIT_TBB_ABORT_HANDLER
509 bool "Krait TBB/TBH data abort handler"
510 depends on ARCH_MSM_KRAIT
511 depends on ARM_THUMB
512 help
513 Certain early samples of the Krait processor may generate data
514 aborts for TBB / TBH instructions that fail their condition code
515 checks. Enabling this option will ignore these erroneous data aborts,
516 at the expense of a very small performance penalty.
Stephen Boyda3d3ef92011-11-08 10:33:04 -0800[diff] [blame]517
Stepan Moskovchenko00da0742011-07-08 14:06:44 -0700[diff] [blame]518 If unsure, say N.
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]519
520config ARCH_MSM_ARM11
521 bool
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]522
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]523config ARCH_MSM_SCORPION
524 bool
525
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]526config ARCH_MSM_KRAIT
Daniel Walker46fe5f22010-08-18 11:00:25 -0700[diff] [blame]527 bool
Stephen Boyd51cabbe2011-12-02 13:28:56 -0800[diff] [blame]528 select ARM_L1_CACHE_SHIFT_6
Daniel Walker46fe5f22010-08-18 11:00:25 -0700[diff] [blame]529
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]530config MSM_SMP
Steve Mucklef132c6c2012-06-06 18:30:57 -0700[diff] [blame]531 select HAVE_SMP
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]532 bool
533
534config ARCH_MSM_SCORPIONMP
535 select ARCH_MSM_SCORPION
536 select MSM_SMP
Taniya Dasc43e6872012-03-21 16:41:14 +0530[diff] [blame]537 select HAVE_ARCH_HAS_CURRENT_TIMER
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]538 select MSM_JTAG if CORESIGHT_ETM
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]539 bool
540
541config ARCH_MSM_KRAITMP
542 select ARCH_MSM_KRAIT
543 select MSM_SMP
Taniya Dasc43e6872012-03-21 16:41:14 +0530[diff] [blame]544 select HAVE_ARCH_HAS_CURRENT_TIMER
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]545 select MSM_JTAG if CORESIGHT_ETM
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]546 bool
547
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]548config ARCH_MSM_CORTEXMP
549 select MSM_SMP
550 bool
551
Stepan Moskovchenko196f86e2012-07-13 20:40:46 -0700[diff] [blame]552config MSM_KRAIT_WFE_FIXUP
553 bool
554
Stepan Moskovchenkoa000d132012-08-14 21:05:14 -0700[diff] [blame]555config MSM_RESTART_V2
556 bool
557
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]558config ARCH_MSM_CORTEX_A5
Bryan Huntsman239ef1e2011-11-23 15:09:13 -0800[diff] [blame]559 bool
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]560
561config ARCH_MSM7X27A
562 bool
563 select MSM_DALRPC
Justin Pauporeb3a33b72011-08-23 15:30:32 -0700[diff] [blame]564 select MSM_PROC_COMM_REGULATOR
Taniya Das86e0e132011-10-19 11:32:00 +0530[diff] [blame]565 select MULTI_IRQ_HANDLER
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]566 select ARM_GIC
567 select ARCH_MSM_CORTEXMP
Trilok Sonib856ab92012-06-26 14:33:28 +0530[diff] [blame]568 select MIGHT_HAVE_CACHE_L2X0
Chintan Pandya3544e742012-08-30 19:39:59 +0530[diff] [blame]569 select ARM_HAS_SG_CHAIN
Ashwin Chaugule3deb6b82012-12-21 13:09:48 -0500[diff] [blame]570 select CPU_HAS_L2_PMU
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]571
Gregory Beanf9f3d312010-04-30 22:06:50 -0700[diff] [blame]572config MSM_VIC
573 bool
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]574
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]575config MSM_RPM
576 bool "Resource Power Manager"
577 select MSM_MPM
578
Mahesh Sivasubramaniana8ff9922012-03-27 17:50:42 -0600[diff] [blame]579config MSM_RPM_SMD
580 depends on MSM_SMD
Mahesh Sivasubramanian102e5962012-06-20 13:12:11 -0600[diff] [blame]581 select MSM_MPM_OF
582 bool "RPM driver using SMD protocol"
583 help
584 RPM is the dedicated hardware engine for managing shared SoC
585 resources. This config adds driver support for using SMD as a
586 transport layer communication with RPM hardware. It also selects
587 the MSM_MPM config that programs the MPM module to monitor interrupts
588 during sleep modes.
Mahesh Sivasubramaniana8ff9922012-03-27 17:50:42 -0600[diff] [blame]589
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]590config MSM_MPM
591 bool "Modem Power Manager"
Mahesh Sivasubramanian102e5962012-06-20 13:12:11 -0600[diff] [blame]592 help
593 MPM is a dedicated hardware resource responsible for entering and
594 waking up from a system wide low power mode. The MPM driver tracks
595 the wakeup interrupts and configures the MPM to monitor the wakeup
596 interrupts when going to a system wide sleep mode.
597
598config MSM_MPM_OF
599 bool "Modem Power Manager"
Subbaraman Narayanamurthy0b148fc2012-11-28 12:14:12 -0800[diff] [blame]600 depends on OF
Mahesh Sivasubramanian102e5962012-06-20 13:12:11 -0600[diff] [blame]601 help
602 MPM is a dedicated hardware resource responsible for entering and
603 waking up from a system wide low power mode. The MPM driver tracks
604 the wakeup interrupts and configures the MPM to monitor the wakeup
605 interrupts when going to a system wide sleep mode. This config option
606 enables the MPM driver that supports initialization from a device
607 tree
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]608
Priyanka Mathur9a75ec52012-12-07 16:02:40 -0800[diff] [blame]609config MSM_LPM_TEST
610 bool "Low Power Mode test framework"
Priyanka Mathur3abfd442013-01-11 12:58:51 -0800[diff] [blame]611 depends on MSM_RPM || MSM_RPM_SMD
Priyanka Mathur9a75ec52012-12-07 16:02:40 -0800[diff] [blame]612 depends on MSM_PM8X60
613 help
614 LPM_TEST is a test framework that assists in exercising the low
615 power mode algorithm on MSM targets. This test framework tracks
616 notifications sent during entry/exit of the low power modes and
617 processes them to measure various stats including latency
618 measurement.
619
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]620config MSM_XO
621 bool
622
623config MSM_REMOTE_SPINLOCK_DEKKERS
624 bool
625config MSM_REMOTE_SPINLOCK_SWP
626 bool
627config MSM_REMOTE_SPINLOCK_LDREX
628 bool
Eric Holmbergeab10732011-09-23 19:44:43 -0600[diff] [blame]629config MSM_REMOTE_SPINLOCK_SFPB
630 bool
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]631config MSM_ADM3
632 bool
633
634menu "MSM Board Selection"
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]635
636config MACH_HALIBUT
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]637 depends on ARCH_MSM7X01A
638 depends on MSM_STACKED_MEMORY
639 default y
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]640 bool "Halibut Board (QCT SURF7201A)"
641 help
642 Support for the Qualcomm SURF7201A eval board.
643
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]644config MACH_MSM7201A_SURF
645 depends on ARCH_MSM7X01A
646 depends on MSM_STACKED_MEMORY
647 default y
648 bool "MSM7201A SURF"
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]649 help
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]650 Support for the Qualcomm MSM7201A SURF eval board.
651
652config MACH_MSM7201A_FFA
653 depends on ARCH_MSM7X01A
654 depends on MSM_STACKED_MEMORY
655 default y
656 bool "MSM7201A FFA"
657 help
658 Support for the Qualcomm MSM7201A FFA eval board.
659
660config MACH_TROUT
661 depends on ARCH_MSM7X01A
662 depends on MSM_STACKED_MEMORY
663 default y
664 bool "Trout"
665
666config MACH_MSM7X27_SURF
667 depends on ARCH_MSM7X27
668 depends on !MSM_STACKED_MEMORY
669 default y
670 bool "MSM7x27 SURF"
671 help
672 Support for the Qualcomm MSM7x27 SURF eval board.
673
674config MACH_MSM7X27_FFA
675 depends on ARCH_MSM7X27
676 depends on !MSM_STACKED_MEMORY
677 default y
678 bool "MSM7x27 FFA"
679 help
680 Support for the Qualcomm MSM7x27 FFA eval board.
681
682config MACH_MSM7X27A_RUMI3
683 depends on ARCH_MSM7X27A
684 depends on !MSM_STACKED_MEMORY
685 default y
686 bool "MSM7x27A RUMI3"
687 help
688 Support for the Qualcomm MSM7x27A RUMI3 Emulation Platform.
689
690config MACH_MSM7X27A_SURF
691 depends on ARCH_MSM7X27A
692 depends on !MSM_STACKED_MEMORY
693 default y
694 bool "MSM7x27A SURF"
695 help
696 Support for the Qualcomm MSM7x27A SURF.
697
698config MACH_MSM7X27A_FFA
699 depends on ARCH_MSM7X27A
700 depends on !MSM_STACKED_MEMORY
701 default y
702 bool "MSM7x27A FFA"
703 help
704 Support for the Qualcomm MSM7x27A FFA.
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]705
Trilok Soni3d0f6c52011-07-26 16:06:58 +0530[diff] [blame]706config MACH_MSM7625A_SURF
707 depends on ARCH_MSM7X27A
708 depends on !MSM_STACKED_MEMORY
709 default y
710 bool "MSM7625A SURF"
711 help
712 Support for the Qualcomm MSM7625A SURF.
713
714config MACH_MSM7625A_FFA
715 depends on ARCH_MSM7X27A
716 depends on !MSM_STACKED_MEMORY
717 default y
718 bool "MSM7625A FFA"
719 help
720 Support for the Qualcomm MSM7625A FFA.
721
Taniya Dasc98bfbc2011-08-23 09:58:55 +0530[diff] [blame]722config MACH_MSM7627A_QRD1
723 depends on ARCH_MSM7X27A
724 depends on !MSM_STACKED_MEMORY
725 default y
726 bool "MSM7627A QRD1"
727 help
Chintan Pandyab1bad0e2012-02-06 19:04:51 +0530[diff] [blame]728 Support for the Qualcomm MSM7627A Reference Design.
729
730config MACH_MSM7627A_QRD3
731 depends on ARCH_MSM7X27A
732 depends on !MSM_STACKED_MEMORY
733 default y
734 bool "MSM7627A QRD3"
735 help
736 Support for the Qualcomm MSM7627A Reference Design.
Taniya Dasc98bfbc2011-08-23 09:58:55 +0530[diff] [blame]737
Taniya Dasc868a2e2012-01-03 10:18:47 +0530[diff] [blame]738config MACH_MSM7627A_EVB
739 depends on ARCH_MSM7X27A
740 depends on !MSM_STACKED_MEMORY
741 default y
742 bool "MSM7627A EVB"
743 help
744 Support for the Qualcomm MSM7627A Reference Design.
745
Taniya Das43bcdd62011-12-02 17:33:27 +0530[diff] [blame]746config MACH_MSM8625_RUMI3
747 depends on ARCH_MSM8625
748 depends on !MSM_STACKED_MEMORY
749 default y
750 bool "MSM8625 RUMI3"
751 help
752 Support for the Qualcomm MSM8625 RUMI3 Emulation Platform.
753
Taniya Dase3027e22012-02-27 16:32:27 +0530[diff] [blame]754config MACH_MSM8625_SURF
755 depends on ARCH_MSM8625
756 depends on !MSM_STACKED_MEMORY
757 default y
758 bool "MSM8625 SURF"
759 help
760 Support for the Qualcomm MSM8625 SURF.
761
Aparna Mallavarapu9f000a72012-04-20 15:37:57 +0530[diff] [blame]762config MACH_MSM8625_FFA
763 depends on ARCH_MSM8625
764 depends on !MSM_STACKED_MEMORY
765 default y
766 bool "MSM8625 FFA"
767 help
768 Support for the Qualcomm MSM8625 FFA.
769
Chintan Pandyaf4ad4002012-02-28 19:49:03 +0530[diff] [blame]770config MACH_MSM8625_EVB
771 depends on ARCH_MSM8625
772 depends on !MSM_STACKED_MEMORY
773 default y
774 bool "MSM8625 EVB"
775 help
776 Support for the Qualcomm MSM8625 Reference Design.
777
Taniya Dasbd096542012-03-15 17:43:45 +0530[diff] [blame]778config MACH_MSM8625_QRD7
779 depends on ARCH_MSM8625
780 depends on !MSM_STACKED_MEMORY
781 default y
782 bool "MSM8625 QRD7"
783 help
784 Support for the Qualcomm MSM8625 Reference Design.
785
Aparna Mallavarapu5a326242012-05-09 19:49:02 +0530[diff] [blame]786config MACH_MSM8625_EVT
787 depends on ARCH_MSM8625
788 depends on !MSM_STACKED_MEMORY
789 default y
790 bool "MSM8625 EVT"
791 help
792 Support for the Qualcomm MSM8625 Reference Design.
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]793
Channagoud Kadabi2bd65c82012-10-12 15:14:23 +0530[diff] [blame]794config MACH_QRD_SKUD_PRIME
795 depends on ARCH_MSM8625
796 depends on !MSM_STACKED_MEMORY
797 default y
798 bool "MSM8625 SKUD PRIME"
799 help
800 Support for the Qualcomm MSM8625 SKUD prime Reference Design.
801 Add support for a SKUD prime reference design based on MSM8x25
802 chipset. This device is much closer to a phone than regular form
803 factor devices, with new touch, display panel and other hardware
804 configurations.
805
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]806config MACH_MSM7X30_SURF
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]807 depends on ARCH_MSM7X30
808 depends on !MSM_STACKED_MEMORY
809 default y
810 bool "MSM7x30 SURF"
811 help
812 Support for the Qualcomm MSM7x30 SURF eval board.
813
814config MACH_MSM7X30_FFA
815 depends on ARCH_MSM7X30
816 depends on !MSM_STACKED_MEMORY
817 default y
818 bool "MSM7x30 FFA"
819 help
820 Support for the Qualcomm MSM7x30 FFA eval board.
821
822config MACH_MSM7X30_FLUID
823 depends on ARCH_MSM7X30
824 depends on !MSM_STACKED_MEMORY
825 default y
826 bool "MSM7x30 FLUID"
827 help
828 Support for the Qualcomm MSM7x30 FLUID eval board.
829
830config MACH_SAPPHIRE
831 depends on ARCH_MSM7X01A
832 default n
833 bool "Sapphire"
Daniel Walker7b521612010-05-06 12:44:57 -0700[diff] [blame]834
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]835config MACH_QSD8X50_SURF
836 depends on ARCH_QSD8X50
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]837 depends on MSM_SOC_REV_NONE
838 depends on MSM_STACKED_MEMORY
839 default y
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]840 bool "QSD8x50 SURF"
841 help
842 Support for the Qualcomm QSD8x50 SURF eval board.
843
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]844config MACH_QSD8X50_FFA
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]845 depends on ARCH_QSD8X50
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]846 depends on MSM_SOC_REV_NONE
847 depends on MSM_STACKED_MEMORY
848 default y
849 bool "QSD8x50 FFA"
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]850 help
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]851 Support for the Qualcomm QSD8x50 FFA eval board.
852
853config MACH_MSM7X25_SURF
854 depends on ARCH_MSM7X25
855 depends on !MSM_STACKED_MEMORY
856 default y
857 bool "MSM7x25 SURF"
858 help
859 Support for the Qualcomm MSM7x25 SURF eval board.
860
861config MACH_MSM7X25_FFA
862 depends on ARCH_MSM7X25
863 depends on !MSM_STACKED_MEMORY
864 default y
865 bool "MSM7x25 FFA"
866 help
867 Support for the Qualcomm MSM7x25 FFA eval board.
868
869config MACH_MSM8X55_SURF
870 depends on ARCH_MSM7X30
871 depends on !MSM_STACKED_MEMORY
872 default y
873 bool "MSM8X55 SURF"
874 help
875 Support for the Qualcomm MSM8x55 SURF eval board.
876
877config MACH_MSM8X55_FFA
878 depends on ARCH_MSM7X30
879 depends on !MSM_STACKED_MEMORY
880 default y
881 bool "MSM8X55 FFA"
882 help
883 Support for the Qualcomm MSM8x55 FFA eval board.
884
885config MACH_MSM8X55_SVLTE_FFA
886 depends on ARCH_MSM7X30
887 depends on !MSM_STACKED_MEMORY
888 default y
889 bool "MSM8X55 SVLTE FFA"
890 help
891 Support for the Qualcomm MSM8x55 SVLTE FFA eval board.
892
893config MACH_MSM8X55_SVLTE_SURF
894 depends on ARCH_MSM7X30
895 depends on !MSM_STACKED_MEMORY
896 default y
897 bool "MSM8X55 SVLTE SURF"
898 help
899 Support for the Qualcomm MSM8x55 SVLTE SURF eval board.
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]900
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]901config MACH_MSM8X60_SURF
902 depends on ARCH_MSM8X60
903 default n
904 bool "MSM8x60 SURF"
905 help
906 Support for the Qualcomm MSM8x60 SURF eval board.
907
Gregory Bean69b7f6f2010-04-04 22:29:02 -0700[diff] [blame]908config MACH_MSM8X60_FFA
909 depends on ARCH_MSM8X60
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]910 default n
Gregory Bean69b7f6f2010-04-04 22:29:02 -0700[diff] [blame]911 bool "MSM8x60 FFA"
912 help
913 Support for the Qualcomm MSM8x60 FFA eval board.
914
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]915config MACH_MSM8X60_FLUID
916 depends on ARCH_MSM8X60
917 default n
918 bool "MSM8x60 FLUID"
919 help
920 Support for the Qualcomm MSM8x60 FLUID platform. The FLUID is an
921 8x60 target which has a form factor that is much closer to that
922 of a phone than other targets. It also has a new display and
923 touchscreen controller.
924
925config MACH_MSM8X60_FUSION
926 depends on ARCH_MSM8X60
927 default n
928 bool "MSM8x60 FUSION"
929 help
930 Support for the Qualcomm MSM8x60 Fusion SURF device.
931
932config MACH_MSM8X60_FUSN_FFA
933 depends on ARCH_MSM8X60
934 default n
935 bool "MSM8x60 FUSN FFA"
936 help
937 Support for the Qualcomm MSM8x60 Fusion FFA device.
938
Zhang Chang Kenef05b172011-07-27 15:28:13 -0400[diff] [blame]939config MACH_MSM8X60_DRAGON
940 depends on ARCH_MSM8X60
941 default n
942 bool "MSM8x60 DRAGON"
943 help
944 Support for the Qualcomm MSM8x60 Dragon board.
945
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]946config MACH_MSM8960_CDP
947 depends on ARCH_MSM8960
948 bool "MSM8960 CDP"
949 help
950 Support for the Qualcomm MSM8960 CDP device.
951
952config MACH_MSM8960_MTP
953 depends on ARCH_MSM8960
954 bool "MSM8960 MTP"
955 help
956 Support for the Qualcomm MSM8960 MTP device.
957
958config MACH_MSM8960_FLUID
959 depends on ARCH_MSM8960
960 bool "MSM8960 FLUID"
961 help
962 Support for the Qualcomm MSM8960 FLUID device.
963
Amir Samuelov0d1f8ae2011-07-28 11:13:58 +0300[diff] [blame]964config MACH_MSM8960_LIQUID
965 depends on ARCH_MSM8960
966 bool "MSM8960 LIQUID"
967 help
968 Support for the Qualcomm MSM8960 LIQUID device.
969
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]970config MACH_MSM8930_CDP
971 depends on ARCH_MSM8930
972 bool "MSM8930 CDP"
973 help
974 Support for the Qualcomm MSM8930 CDP device.
975
976config MACH_MSM8930_MTP
977 depends on ARCH_MSM8930
978 bool "MSM8930 MTP"
979 help
980 Support for the Qualcomm MSM8930 MTP device.
981
982config MACH_MSM8930_FLUID
983 depends on ARCH_MSM8930
984 bool "MSM8930 FLUID"
985 help
986 Support for the Qualcomm MSM8930 FLUID device.
987
Stepan Moskovchenko8768eff2011-12-01 18:55:07 -0800[diff] [blame]988config MACH_MSM8627_CDP
989 depends on ARCH_MSM8930
990 bool "MSM8627 CDP"
991 help
992 Support for the Qualcomm MSM8627 CDP device.
993
994config MACH_MSM8627_MTP
995 depends on ARCH_MSM8930
996 bool "MSM8627 MTP"
997 help
998 Support for the Qualcomm MSM8627 MTP device.
999
Rohit Vaswania8e7a832011-09-28 21:00:05 -0700[diff] [blame]1000config MACH_MSM9615_CDP
1001 depends on ARCH_MSM9615
1002 bool "MSM9615 CDP"
1003 help
1004 Support for the Qualcomm MSM9615 CDP device.
1005
1006config MACH_MSM9615_MTP
1007 depends on ARCH_MSM9615
1008 bool "MSM9615 MTP"
1009 help
1010 Support for the Qualcomm MSM9615 MTP device.
1011
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1012config MSM_USE_TSIF1
1013 depends on ARCH_MSM8X60
1014 bool "MSM8x60 use TSIF1"
1015 help
1016 Selects TSIF1 core to be used rather than TSIF0.
1017 The two TSIF cores share the same DM configuration
1018 so they cannot be used simultaneously.
1019
Joel King82b7e3f2012-01-05 10:03:27 -0800[diff] [blame]1020config MACH_APQ8064_CDP
1021 depends on ARCH_APQ8064
1022 bool "APQ8064 CDP"
1023 help
1024 Support for the Qualcomm APQ8064 CDP device.
1025
Rohit Vaswani4375c802013-01-09 13:38:19 -0800[diff] [blame]1026config MACH_FSM8064_EP
1027 depends on ARCH_APQ8064
1028 bool "FSM8064 EP"
1029 help
1030 Support for the Qualcomm FSM8064 EP device.
1031 This board also known as Femto development platform (FDP)
1032 is based on APQ8064 chipset. This board does not support
1033 keyboard, display or multimedia.
1034
Joel King82b7e3f2012-01-05 10:03:27 -0800[diff] [blame]1035config MACH_APQ8064_MTP
1036 depends on ARCH_APQ8064
1037 bool "APQ8064 MTP"
1038 help
1039 Support for the Qualcomm APQ8064 MTP device.
1040
1041config MACH_APQ8064_LIQUID
1042 depends on ARCH_APQ8064
1043 bool "APQ8064 LIQUID"
1044 help
1045 Support for the Qualcomm APQ8064 LIQUID device.
1046
Joel King064bbf82012-04-01 13:23:39 -0700[diff] [blame]1047config MACH_MPQ8064_CDP
1048 depends on ARCH_APQ8064
1049 bool "MPQ8064 CDP"
1050 help
1051 Support for the Qualcomm MPQ8064 CDP device.
1052
Joel King11ca8202012-02-13 16:19:03 -0800[diff] [blame]1053config MACH_MPQ8064_HRD
1054 depends on ARCH_APQ8064
1055 bool "MPQ8064 HRD"
1056 help
1057 Support for the Qualcomm MPQ8064 HRD device.
1058
1059config MACH_MPQ8064_DTV
1060 depends on ARCH_APQ8064
1061 bool "MPQ8064 DTV"
1062 help
1063 Support for the Qualcomm MPQ8064 DTV device.
1064
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1065config MACH_FSM9XXX_SURF
1066 depends on ARCH_FSM9XXX
1067 depends on !MSM_STACKED_MEMORY
1068 default y
1069 bool "FSM9XXX SURF"
1070 help
1071 Support for the Qualcomm FSM9xxx femtocell
1072 chipset based SURF evaluation board and
1073 FFA board.
1074
Daniel Walker4ad15e62010-05-06 13:54:17 -0700[diff] [blame]1075endmenu
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1076
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1077config MSM_STACKED_MEMORY
1078 bool "Stacked Memory"
1079 default y
Stepan Moskovchenko24f61732011-02-11 12:28:16 -0800[diff] [blame]1080 help
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1081 This option is used to indicate the presence of on-die stacked
1082 memory. When present this memory bank is used for a high speed
1083 shared memory interface. When not present regular RAM is used.
Stepan Moskovchenko24f61732011-02-11 12:28:16 -0800[diff] [blame]1084
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1085config PHYS_OFFSET
1086 hex
Rohit Vaswaniddeb52a2011-08-16 12:26:32 -0700[diff] [blame]1087 default "0x40800000" if ARCH_MSM9615
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1088 default "0x80200000" if ARCH_APQ8064
1089 default "0x80200000" if ARCH_MSM8960
Stepan Moskovchenko082952d2011-10-18 17:27:08 -0700[diff] [blame]1090 default "0x80200000" if ARCH_MSM8930
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]1091 default "0x00000000" if ARCH_MSM8974
Stepan Moskovchenkoe90cd652013-04-18 12:54:47 -0700[diff] [blame]1092 default "0x00000000" if ARCH_APQ8084
Ravi Kumar Vb31dbba2012-08-31 22:40:22 +0530[diff] [blame]1093 default "0x00000000" if ARCH_MPQ8092
Syed Rameez Mustafa1c99fd32013-03-05 22:11:17 -0800[diff] [blame]1094 default "0x00000000" if ARCH_MSM8226
1095 default "0x00000000" if ARCH_MSM8610
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1096 default "0x10000000" if ARCH_FSM9XXX
Abhimanyu Kapur20ac2ad2012-09-25 04:23:59 -0700[diff] [blame]1097 default "0x00200000" if ARCH_MSM9625
Abhimanyu Kapur38226352013-04-23 17:14:57 -0700[diff] [blame]1098 default "0x00000000" if ARCH_MSMKRYPTON
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1099 default "0x00200000" if !MSM_STACKED_MEMORY
1100 default "0x00000000" if ARCH_QSD8X50 && MSM_SOC_REV_A
1101 default "0x20000000" if ARCH_QSD8X50
1102 default "0x40200000" if ARCH_MSM8X60
1103 default "0x10000000"
Stepan Moskovchenko24f61732011-02-11 12:28:16 -0800[diff] [blame]1104
Mitchel Humpherys05e58812012-08-13 14:24:13 -0700[diff] [blame]1105config KERNEL_MSM_CONTIG_MEM_REGION
1106 bool "Enable in-kernel contiguous memory region"
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1107 default y if ARCH_MSM8X60
Laura Abbottc1fa75b2013-04-02 14:29:53 -0700[diff] [blame]1108 depends on ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM8974
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1109 help
Mitchel Humpherys05e58812012-08-13 14:24:13 -0700[diff] [blame]1110 Enable the in-kernel contiguous memory allocator. Sets up a
1111 region of physically contiguous memory. This memory is
1112 reserved during initialization, and can be used
1113 generically.
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1114
1115config KERNEL_PMEM_SMI_REGION
1116 bool "Enable in-kernel PMEM region for SMI"
1117 default y if ARCH_MSM8X60
Laura Abbott0913ebc2013-04-29 12:56:14 -0700[diff] [blame]1118 depends on (ARCH_QSD8X50 && !PMEM_GPU0) || (ARCH_MSM8X60 && !VCM)
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1119 help
1120 Enable the in-kernel PMEM allocator to use SMI memory.
1121
1122config PMEM_GPU0
1123 bool "Enable PMEM GPU0 region"
1124 default y
Laura Abbott0913ebc2013-04-29 12:56:14 -0700[diff] [blame]1125 depends on ARCH_QSD8X50
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1126 help
1127 Enable the PMEM GPU0 device on SMI Memory.
1128
1129config MSM_AMSS_VERSION
1130 int
1131 default 6210 if MSM_AMSS_VERSION_6210
1132 default 6220 if MSM_AMSS_VERSION_6220
1133 default 6225 if MSM_AMSS_VERSION_6225
1134
1135choice
1136 prompt "AMSS modem firmware version"
1137
1138 default MSM_AMSS_VERSION_6225
1139
1140 config MSM_AMSS_VERSION_6210
1141 bool "6.2.10"
1142
1143 config MSM_AMSS_VERSION_6220
1144 bool "6.2.20"
1145
1146 config MSM_AMSS_VERSION_6225
1147 bool "6.2.20 + New ADSP"
1148endchoice
Stepan Moskovchenko2607b0a2010-11-15 17:46:10 -0800[diff] [blame]1149
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1150config MSM_HAS_DEBUG_UART_HS
Daniel Walkerbf83de42010-03-16 16:29:44 -0700[diff] [blame]1151 bool
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1152 help
1153 Say Y here if high speed MSM UART is present.
1154
1155config MSM_HAS_DEBUG_UART_HS_V14
1156 bool
1157 select MSM_HAS_DEBUG_UART_HS
1158 help
1159 Say Y here if high speed MSM UART v1.4 is present.
1160
Taniya Dasfa4ee7f2012-02-21 15:04:51 +0530[diff] [blame]1161config MSM_DEBUG_UART_PHYS
1162 hex
1163 default 0xA9A00000 if (ARCH_MSM7X27 || ARCH_QSD8X50) && DEBUG_MSM_UART1
1164 default 0xACA00000 if ARCH_MSM7X30 && DEBUG_MSM_UART1
1165 default 0x94000000 if ARCH_FSM9XXX && DEBUG_MSM_UART1
1166 default 0xA9B00000 if (ARCH_MSM7X27 || ARCH_QSD8X50) && DEBUG_MSM_UART2
1167 default 0xACB00000 if ARCH_MSM7X30 && DEBUG_MSM_UART2
1168 default 0x94100000 if ARCH_FSM9XXX && DEBUG_MSM_UART2
1169 default 0xA9C00000 if (ARCH_MSM7X27 || ARCH_QSD8X50) && DEBUG_MSM_UART3
1170 default 0xACC00000 if ARCH_MSM7X30 && DEBUG_MSM_UART3
1171
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1172choice
1173 prompt "Debug UART"
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1174 depends on DEBUG_LL
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1175
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1176 config DEBUG_MSM_UART1
1177 bool "Kernel low-level debugging messages via MSM UART1"
Taniya Dasfa4ee7f2012-02-21 15:04:51 +0530[diff] [blame]1178 depends on ARCH_MSM7X27 || ARCH_MSM7X30 || ARCH_QSD8X50 || ARCH_FSM9XXX
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1179 help
1180 Say Y here if you want the debug print routines to direct
1181 their output to the first serial port on MSM devices.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1182
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1183 config DEBUG_MSM_UART2
1184 bool "Kernel low-level debugging messages via MSM UART2"
Taniya Dasfa4ee7f2012-02-21 15:04:51 +0530[diff] [blame]1185 depends on ARCH_MSM7X27 || ARCH_MSM7X30 || ARCH_QSD8X50 || ARCH_FSM9XXX
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1186 help
1187 Say Y here if you want the debug print routines to direct
1188 their output to the second serial port on MSM devices.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1189
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1190 config DEBUG_MSM_UART3
1191 bool "Kernel low-level debugging messages via MSM UART3"
Taniya Dasfa4ee7f2012-02-21 15:04:51 +0530[diff] [blame]1192 depends on ARCH_MSM7X27 || ARCH_MSM7X30 || ARCH_QSD8X50
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1193 help
1194 Say Y here if you want the debug print routines to direct
1195 their output to the third serial port on MSM devices.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1196
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1197 config DEBUG_MSM8660_UART
1198 bool "Kernel low-level debugging messages via MSM 8660 UART"
1199 depends on ARCH_MSM8X60
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1200 select MSM_HAS_DEBUG_UART_HS
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1201 help
1202 Say Y here if you want the debug print routines to direct
1203 their output to the serial port on MSM 8660 devices.
Steve Mucklec8aabae2010-04-21 16:20:27 -0700[diff] [blame]1204
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1205 config DEBUG_MSM8960_UART
1206 bool "Kernel low-level debugging messages via MSM 8960 UART"
Stepan Moskovchenko824db172012-05-29 18:05:09 -0700[diff] [blame]1207 depends on ARCH_MSM8960 && DEBUG_LL
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1208 select MSM_HAS_DEBUG_UART_HS
Sathish Ambleybb87d5f2011-11-08 15:14:01 -0800[diff] [blame]1209 help
1210 Say Y here if you want the debug print routines to direct
1211 their output to the serial port on MSM 8960 devices.
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1212
Stepan Moskovchenko824db172012-05-29 18:05:09 -0700[diff] [blame]1213 config DEBUG_MSM8930_UART
1214 bool "Kernel low-level debugging messages via MSM 8930 UART"
1215 depends on ARCH_MSM8930 && DEBUG_LL
1216 select MSM_HAS_DEBUG_UART_HS
1217 help
1218 Say Y here if you want the debug print routines to direct
1219 their output to the serial port on MSM 8930 devices.
1220
1221 config DEBUG_APQ8064_UART
1222 bool "Kernel low-level debugging messages via APQ 8064 UART"
1223 depends on ARCH_APQ8064 && DEBUG_LL
1224 select MSM_HAS_DEBUG_UART_HS
1225 help
1226 Say Y here if you want the debug print routines to direct
1227 their output to the serial port on APQ 8064 devices.
1228
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]1229 config DEBUG_MSM8974_UART
1230 bool "Kernel low-level debugging messages via MSM 8974 UART"
1231 depends on ARCH_MSM8974
Sathish Ambleyf5bebd62011-11-03 23:36:36 -0700[diff] [blame]1232 select MSM_HAS_DEBUG_UART_HS_V14
1233 help
1234 Say Y here if you want the debug print routines to direct
Abhimanyu Kapur90ced6e2012-06-26 17:41:25 -0700[diff] [blame]1235 their output to the serial port on MSM 8974 devices.
Ravi Kumar Vb31dbba2012-08-31 22:40:22 +0530[diff] [blame]1236
1237 config DEBUG_MPQ8092_UART
1238 bool "Kernel low-level debugging messages via MPQ8092 UART"
1239 depends on ARCH_MPQ8092
1240 select MSM_HAS_DEBUG_UART_HS_V14
1241 help
1242 Say Y here if you want the debug print routines to direct
1243 their output to the serial port on MPQ8092 devices.
Stepan Moskovchenko80064f32013-03-05 16:58:39 -0800[diff] [blame]1244
Stepan Moskovchenkoe90cd652013-04-18 12:54:47 -0700[diff] [blame]1245 config DEBUG_APQ8084_UART
1246 bool "Kernel low-level debugging messages via APQ8084 UART"
1247 depends on ARCH_APQ8084
Stepan Moskovchenko80064f32013-03-05 16:58:39 -0800[diff] [blame]1248 select MSM_HAS_DEBUG_UART_HS_V14
1249 help
1250 Say Y here if you want the debug print routines to direct
Stepan Moskovchenkoe90cd652013-04-18 12:54:47 -0700[diff] [blame]1251 their output to the serial port on APQ8084 devices.
Stephen Boydb9dedc62013-04-19 15:29:30 -0700[diff] [blame]1252
1253 config DEBUG_MSM9625_UART
1254 bool "Kernel low-level debugging messages via MSM9625 UART"
1255 depends on ARCH_MSM9625
1256 select MSM_HAS_DEBUG_UART_HS_V14
1257 help
1258 Say Y here if you want the debug print routines to direct
1259 their output to the serial port on MSM9625 devices.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1260endchoice
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1261
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1262choice
1263 prompt "Default Timer"
1264 default MSM7X00A_USE_GP_TIMER
1265
1266 config MSM7X00A_USE_GP_TIMER
1267 bool "GP Timer"
1268 help
1269 Low resolution timer that allows power collapse from idle.
1270
1271 config MSM7X00A_USE_DG_TIMER
1272 bool "DG Timer"
1273 help
1274 High resolution timer.
1275endchoice
1276
1277choice
1278 prompt "Suspend sleep mode"
1279 default MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1280 help
1281 Allows overriding the sleep mode used. Leave at power
1282 collapse suspend unless the arm9 image has problems.
1283
1284 config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1285 bool "Power collapse suspend"
1286 help
1287 Lowest sleep state. Returns through reset vector.
1288
1289 config MSM7X00A_SLEEP_MODE_POWER_COLLAPSE
1290 bool "Power collapse"
1291 help
1292 Sleep state that returns through reset vector.
1293
1294 config MSM7X00A_SLEEP_MODE_APPS_SLEEP
1295 bool "Apps Sleep"
1296
1297 config MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
1298 bool "Ramp down cpu clock and wait for interrupt"
1299
1300 config MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT
1301 bool "Wait for interrupt"
1302endchoice
1303
1304config MSM7X00A_SLEEP_MODE
1305 int
1306 default 0 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1307 default 1 if MSM7X00A_SLEEP_MODE_POWER_COLLAPSE
1308 default 2 if MSM7X00A_SLEEP_MODE_APPS_SLEEP
1309 default 3 if MSM7X00A_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
1310 default 4 if MSM7X00A_SLEEP_WAIT_FOR_INTERRUPT
1311
1312choice
1313 prompt "Idle sleep mode"
1314 default MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
1315 help
1316 Allows overriding the sleep mode used from idle. Leave at power
1317 collapse suspend unless the arm9 image has problems.
1318
1319 config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1320 bool "Power collapse suspend"
1321 help
1322 Lowest sleep state. Returns through reset vector.
1323
1324 config MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
1325 bool "Power collapse"
1326 help
1327 Sleep state that returns through reset vector.
1328
1329 config MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP
1330 bool "Apps Sleep"
1331
1332 config MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
1333 bool "Ramp down cpu clock and wait for interrupt"
1334
1335 config MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT
1336 bool "Wait for interrupt"
1337endchoice
1338
1339config MSM7X00A_IDLE_SLEEP_MODE
1340 int
1341 default 0 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE_SUSPEND
1342 default 1 if MSM7X00A_IDLE_SLEEP_MODE_POWER_COLLAPSE
1343 default 2 if MSM7X00A_IDLE_SLEEP_MODE_APPS_SLEEP
1344 default 3 if MSM7X00A_IDLE_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT
1345 default 4 if MSM7X00A_IDLE_SLEEP_WAIT_FOR_INTERRUPT
1346
1347config MSM7X00A_IDLE_SLEEP_MIN_TIME
1348 int "Minimum idle time before sleep"
1349 default 20000000
1350 help
1351 Minimum idle time in nanoseconds before entering low power mode.
1352
1353config MSM7X00A_IDLE_SPIN_TIME
1354 int "Idle spin time before cpu ramp down"
1355 default 80000
1356 help
1357 Spin time in nanoseconds before ramping down cpu clock and entering
1358 any low power state.
1359
1360menuconfig MSM_IDLE_STATS
1361 bool "Collect idle statistics"
1362 default y
1363 help
1364 Collect idle statistics and export them in proc/msm_pm_stats.
1365
1366if MSM_IDLE_STATS
1367
1368config MSM_IDLE_STATS_FIRST_BUCKET
1369 int "First bucket time"
1370 default 62500
1371 help
1372 Upper time limit in nanoseconds of first bucket.
1373
1374config MSM_IDLE_STATS_BUCKET_SHIFT
1375 int "Bucket shift"
1376 default 2
1377
1378config MSM_IDLE_STATS_BUCKET_COUNT
1379 int "Bucket count"
1380 default 10
1381
1382config MSM_SUSPEND_STATS_FIRST_BUCKET
1383 int "First bucket time for suspend"
1384 default 1000000000
1385 help
1386 Upper time limit in nanoseconds of first bucket of the
1387 histogram. This is for collecting statistics on suspend.
1388
1389endif # MSM_IDLE_STATS
1390
1391config CPU_HAS_L2_PMU
1392 bool "L2CC PMU Support"
1393 help
1394 Select this if the L2 cache controller has a Performance Monitoring Unit.
1395
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1396config HTC_HEADSET
1397 tristate "HTC 2 Wire detection driver"
1398 default n
1399 help
1400 Provides support for detecting HTC 2 wire devices, such as wired
1401 headset, on the trout platform. Can be used with the msm serial
1402 debugger, but not with serial console.
1403
1404config TROUT_BATTCHG
1405 depends on MACH_TROUT && POWER_SUPPLY
1406 default y
1407 bool "Trout battery / charger driver"
1408
1409config HTC_PWRSINK
1410 depends on MSM_SMD
1411 default n
1412 bool "HTC Power Sink Driver"
1413
1414config QSD_SVS
1415 bool "QSD Static Voltage Scaling"
1416 depends on (MACH_QSD8X50_SURF || MACH_QSD8X50_FFA)
1417 default y
1418 select TPS65023
1419 help
1420 Enables static voltage scaling using the TPS65023 PMIC.
1421
1422config QSD_PMIC_DEFAULT_DCDC1
1423 int "PMIC default output voltage"
1424 depends on (MACH_QSD8X50_SURF || MACH_QSD8X50_FFA)
1425 default 1250
1426 help
1427 This is the PMIC voltage at Linux kernel boot.
1428
1429config MSM_FIQ_SUPPORT
1430 default y
1431 bool "Enable installation of an FIQ handler."
1432
1433config MSM_SERIAL_DEBUGGER
1434 select MSM_FIQ_SUPPORT
1435 select KERNEL_DEBUGGER_CORE
1436 default n
1437 bool "FIQ Mode Serial Debugger"
1438 help
1439 The FIQ serial debugger can accept commands even when the
1440 kernel is unresponsive due to being stuck with interrupts
1441 disabled. Depends on the kernel debugger core in drivers/misc.
1442
1443config MSM_SERIAL_DEBUGGER_CONSOLE
1444 depends on MSM_SERIAL_DEBUGGER
1445 default n
1446 bool "Console on FIQ Serial Debugger port"
1447 help
1448 Enables a console so that printk messages are displayed on
1449 the debugger serial port as the occur.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]1450
Gregory Beanab78cde2010-09-01 16:26:12 -0700[diff] [blame]1451config MSM_PROC_COMM
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1452 default y
1453 bool "Proc-Comm RPC Interface"
1454 help
1455 Enables a lightweight communications interface to the
1456 baseband processor.
Gregory Beanab78cde2010-09-01 16:26:12 -0700[diff] [blame]1457
Gregory Bean1963a2a2010-08-28 10:05:44 -0700[diff] [blame]1458config MSM_SMD
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1459 bool "MSM Shared Memory Driver (SMD)"
1460 help
1461 Support for the shared memory interface between the apps
1462 processor and the baseband processor. Provides access to
1463 the "shared heap", as well as virtual serial channels
1464 used to communicate with various services on the baseband
1465 processor.
1466
1467choice
1468 prompt "MSM Shared memory interface version"
1469 depends on MSM_SMD
1470 default MSM_SMD_PKG3 if ARCH_MSM_ARM11
1471 default MSM_SMD_PKG4 if ARCH_MSM_SCORPION
1472
1473 config MSM_SMD_PKG3
1474 bool
1475 prompt "Package 3"
1476
1477 config MSM_SMD_PKG4
1478 bool
1479 prompt "Package 4"
1480endchoice
1481
Niranjana Vishwanathapuraf1427ac2012-05-03 14:28:21 -0600[diff] [blame]1482config MSM_PCIE
1483 bool "MSM PCIe Controller driver"
1484 depends on PCI && PCI_MSI
1485 help
1486 Enables the PCIe functionality by configures PCIe core on
1487 MSM chipset and by enabling the ARM PCI framework extension.
1488
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1489config MSM_RPC_SDIO_XPRT
1490 depends on MSM_SDIO_AL
1491 default y
1492 bool "MSM SDIO XPRT Layer"
1493 help
1494 SDIO Transport Layer for RPC Rouer
1495
1496config MSM_RPC_SDIO_DEBUG
1497 depends on MSM_RPC_SDIO_XPRT
1498 default y
1499 bool "MSM SDIO XPRT debug support"
1500 help
1501 Support for debugging SDIO XPRT
1502
1503config MSM_SMD_DEBUG
1504 depends on MSM_SMD
1505 default y
1506 bool "MSM SMD debug support"
1507 help
1508 Support for debugging the SMD for communication
1509 between the ARM9 and ARM11
1510
1511config MSM_SDIO_AL
1512 depends on ((ARCH_MSM7X30 || MACH_MSM8X60_FUSN_FFA || MACH_TYPE_MSM8X60_FUSION) && HAS_WAKELOCK)
1513 default y
1514 tristate "SDIO-Abstraction-Layer"
1515 help
1516 Support MSM<->MDM Communication over SDIO bus.
1517 MDM SDIO-Client should have pipes support.
1518
1519config MSM_SDIO_DMUX
1520 bool "SDIO Data Mux Driver"
1521 depends on MSM_SDIO_AL
1522 default n
1523 help
1524 Support Muxed Data Channels over SDIO interface.
1525
1526config MSM_BAM_DMUX
1527 bool "BAM Data Mux Driver"
1528 depends on SPS
1529 default n
1530 help
1531 Support Muxed Data Channels over BAM interface.
1532 BAM has a limited number of pipes. This driver
1533 provides a means to support more logical channels
1534 via muxing than BAM could without muxing.
1535
1536config MSM_N_WAY_SMD
Jeff Hugo0c0f5e92011-09-28 13:55:45 -0600[diff] [blame]1537 depends on (MSM_SMD && !(ARCH_MSM7X01A))
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1538 default y
1539 bool "MSM N-WAY SMD support"
1540 help
1541 Supports APPS-QDSP SMD communication along with
1542 normal APPS-MODEM SMD communication.
1543
1544config MSM_N_WAY_SMSM
Jeff Hugo0c0f5e92011-09-28 13:55:45 -0600[diff] [blame]1545 depends on (MSM_SMD && !(ARCH_MSM7X01A))
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1546 default y
1547 bool "MSM N-WAY SMSM support"
1548 help
1549 Supports APPS-QDSP SMSM communication along with
1550 normal APPS-MODEM SMSM communication.
1551
Eric Holmberg6275b602012-11-19 13:05:04 -0700[diff] [blame]1552config MSM_SMP2P
1553 bool "SMSM Point-to-Point (SMP2P)"
1554 depends on MSM_SMD
1555 help
1556 Provide point-to-point remote signaling support.
1557 SMP2P enables transferring 32-bit values between
1558 the local and a remote system using shared
1559 memory and interrupts. A client can open multiple
1560 32-bit values by specifying a unique string and
1561 remote processor ID.
1562
1563config MSM_SMP2P_TEST
1564 bool "SMSM Point-to-Point Test"
1565 depends on MSM_SMP2P
1566 help
1567 Enables loopback and unit testing support for
1568 SMP2P. Loopback support is used by other
1569 processors to do unit testing. Unit tests
1570 are used to verify the local and remote
1571 implementations.
1572
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1573config MSM_RESET_MODEM
1574 tristate "Reset Modem Driver"
1575 depends on MSM_SMD
1576 default m
1577 help
1578 Allows the user to reset the modem through a device node.
1579
1580config MSM_SMD_LOGGING
1581 depends on MSM_SMD
1582 default y
1583 bool "MSM Shared Memory Logger"
1584 help
1585 This option exposes the shared memory logger at /dev/smem_log
1586 and a debugfs node named smem_log.
1587
1588 If in doubt, say yes.
1589
Karthikeyan Ramasubramaniane1f4f732011-08-08 13:34:47 -0600[diff] [blame]1590config MSM_IPC_LOGGING
1591 bool "MSM Debug Logging for IPC Drivers"
1592 help
1593 This option allows the debug logging for IPC Drivers.
1594
1595 If in doubt, say no.
1596
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1597config MSM_SMD_NMEA
1598 bool "NMEA GPS Driver"
1599 depends on MSM_SMD
1600 default y
1601 help
1602 Enable this to support the NMEA GPS device.
1603
1604 If in doubt, say yes.
1605
1606config MSM_SDIO_TTY
1607 bool "SDIO TTY Driver"
1608 depends on MSM_SDIO_AL
1609 default n
1610 help
1611 Provides a TTY driver SDIO TTY
1612 This driver can be used by user space
1613 applications for passing data through the
1614 SDIO interface.
1615
1616config MSM_SMD_TTY
1617 bool "SMD TTY Driver"
1618 depends on MSM_SMD
1619 default y
1620 help
1621 Provides TTY interfaces to interact with the modem.
1622
1623 If in doubt, say yes.
1624
1625config MSM_SMD_QMI
1626 bool "SMD QMI Driver"
1627 depends on MSM_SMD
1628 default y
1629 help
1630 Manages network data connections.
1631
1632 If in doubt, say yes.
1633
1634config MSM_SMD_PKT
1635 bool "SMD Packet Driver"
1636 depends on MSM_SMD
1637 default y
1638 help
1639 Provides a binary SMD non-muxed packet port interface.
1640
1641 If in doubt, say yes.
1642
1643config MSM_SDIO_CMUX
1644 bool "SDIO CMUX Driver"
1645 depends on MSM_SDIO_AL
1646 default n
1647 help
1648 Provides a Muxed port interface over SDIO QMI
1649
1650config MSM_DSPS
1651 bool "Sensors DSPS driver"
1652 depends on (MSM_PIL && (ARCH_MSM8X60 || ARCH_MSM8960))
1653 default n
1654 help
1655 Provides user-space interface to the sensors manager
1656 to turn on/off the Sensors Processor system clocks.
1657 It is the DSPS responsibility to turn on/off the sensors
1658 themself.
1659 The number of clocks and their name may vary between targets.
1660 It also triggers the PIL to load the DSPS firmware.
1661
1662config MSM_SDIO_CTL
1663 bool "SDIO CTL Driver"
1664 depends on MSM_SDIO_CMUX
1665 default n
1666 help
1667 Provides a binary SDIO control port interface.
1668
1669config MSM_ONCRPCROUTER
1670 depends on MSM_SMD
1671 default n
1672 bool "MSM ONCRPC router support"
1673 help
1674 Support for the MSM ONCRPC router for communication between
1675 the ARM9 and ARM11
1676
1677config MSM_IPC_ROUTER
Karthikeyan Ramasubramanianda45b432011-09-23 14:39:30 -0600[diff] [blame]1678 depends on NET
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1679 default n
1680 bool "MSM IPC Router support"
1681 help
1682 Support for the MSM IPC Router for communication between
1683 the APPs and the MODEM
1684
Karthikeyan Ramasubramanianda45b432011-09-23 14:39:30 -0600[diff] [blame]1685config MSM_IPC_ROUTER_SMD_XPRT
1686 depends on MSM_SMD
1687 depends on MSM_IPC_ROUTER
1688 default n
1689 bool "MSM SMD XPRT Layer"
1690 help
1691 SMD Transport Layer for IPC Router
1692
Karthikeyan Ramasubramanian5b502d3642012-09-23 22:23:36 -0600[diff] [blame]1693config MSM_IPC_ROUTER_SECURITY
1694 depends on MSM_IPC_ROUTER
1695 bool "MSM IPC Router Security support"
1696 help
1697 This feature of IPC Router will enforce security rules
1698 configured by a security script from the user-space. IPC Router
1699 once configured with the security rules will ensure that the
1700 sender of the message to a service belongs to the relevant
1701 Linux group as configured by the security script.
1702
Karthikeyan Ramasubramanianfec77ff2012-10-26 20:03:26 -0600[diff] [blame]1703config MSM_QMI_INTERFACE
1704 depends on MSM_IPC_ROUTER
1705 depends on QMI_ENCDEC
1706 default n
1707 bool "MSM QMI Interface Library"
1708 help
1709 Library to send and receive QMI messages over IPC Router.
1710 This library provides interface functions to the kernel drivers
1711 to perform QMI message marshaling and transport them over IPC
1712 Router.
1713
Karthikeyan Ramasubramaniana9859e82012-07-12 13:10:42 -0600[diff] [blame]1714config MSM_TEST_QMI_CLIENT
1715 depends on MSM_QMI_INTERFACE
1716 bool "MSM TEST QMI CLIENT"
1717 help
1718 The sample QMI client provides a test code for QMI usage. The
1719 test_service client driver uses QMI interface library to send
1720 and receive QMI messages over IPC Router. The test code sends
1721 a synchronous QMI request to the test_service and handles the
1722 QMI responses.
1723
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1724config MSM_ONCRPCROUTER_DEBUG
1725 depends on MSM_ONCRPCROUTER
1726 default y
1727 bool "MSM debug ONCRPC router support"
1728 help
1729 Support for debugging the ONCRPC router for communication
1730 between the ARM9 and ARM11
1731
1732config MSM_RPC_LOOPBACK_XPRT
1733 depends on MSM_ONCRPCROUTER
1734 default n
1735 bool "MSM RPC local routing support"
1736 help
1737 Support for routing RPC messages between APPS clients
1738 and APPS servers. Helps in testing APPS RPC framework.
1739
1740config MSM_RPCSERVER_TIME_REMOTE
1741 depends on MSM_ONCRPCROUTER && RTC_HCTOSYS
1742 default y
1743 bool "Time remote RPC server"
1744 help
1745 The time remote server receives notification of time bases and
1746 reports these events to registered callback functions.
1747
1748config MSM_RPCSERVER_WATCHDOG
1749 depends on MSM_ONCRPCROUTER
1750 default y
1751 bool "Watchdog RPC server"
1752 help
1753 The dog_keepalive server handles watchdog events.
1754
1755config MSM_RPC_WATCHDOG
1756 depends on MSM_ONCRPCROUTER
1757 default n
1758 bool "Watchdog RPC client"
1759 help
1760 The dog_keepalive client module.
1761
1762config MSM_RPC_PING
1763 depends on MSM_ONCRPCROUTER && DEBUG_FS
1764 default m
1765 bool "MSM rpc ping"
1766 help
1767 Implements MSM rpc ping test module.
1768
1769config MSM_RPC_PROC_COMM_TEST
1770 depends on DEBUG_FS && MSM_PROC_COMM
1771 default m
1772 bool "MSM rpc proc comm test"
1773 help
1774 Implements MSM rpc proc comm test module.
1775
1776config MSM_RPC_OEM_RAPI
1777 depends on MSM_ONCRPCROUTER
1778 default m
1779 bool "MSM oem rapi"
1780 help
1781 Implements MSM oem rapi client module.
1782
1783config MSM_RPCSERVER_HANDSET
1784 depends on MSM_ONCRPCROUTER
1785 default y
1786 bool "Handset events RPC server"
1787 help
1788 Support for receiving handset events like headset detect,
1789 headset switch and clamshell state.
1790
1791config MSM_RMT_STORAGE_CLIENT
1792 depends on (ARCH_MSM && MSM_ONCRPCROUTER)
1793 default n
1794 bool "Remote Storage RPC client"
1795 help
1796 Provide RPC mechanism for remote processors to access storage
1797 device on apps processor.
1798
1799config MSM_RMT_STORAGE_CLIENT_STATS
1800 depends on (MSM_RMT_STORAGE_CLIENT && DEBUG_FS)
1801 default n
1802 bool "Remote storage RPC client performance statistics"
1803 help
1804 Collects performance statistics and shows this information
1805 through a debugfs file rmt_storage_stats.
1806
1807config MSM_SDIO_SMEM
1808 depends on MSM_SDIO_AL
1809 default n
1810 bool "SDIO SMEM for remote storage"
1811 help
1812 Copies data from remote MDM9K memory to local MSM8x60
1813 memory. Used by remote storage client to shadow
1814 MDM9K filesystem.
1815
1816config MSM_DALRPC
1817 bool "DAL RPC support"
Bryan Huntsman18b3c0c2011-11-23 15:12:58 -0800[diff] [blame]1818 default n
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1819 help
1820 Supports RPC calls to DAL devices on remote processor cores.
1821
1822config MSM_DALRPC_TEST
1823 tristate "DAL RPC test module"
1824 depends on (MSM_DALRPC && DEBUG_FS)
1825 default m
1826 help
1827 Exercises DAL RPC calls to QDSP6.
1828
1829if CPU_FREQ_MSM
1830
1831config MSM_CPU_FREQ_SET_MIN_MAX
1832 bool "Set Min/Max CPU frequencies."
1833 default n
1834 help
1835 Allow setting min and max CPU frequencies. Sysfs can be used
1836 to override these values.
1837
1838config MSM_CPU_FREQ_MAX
1839 int "Max CPU Frequency"
1840 depends on MSM_CPU_FREQ_SET_MIN_MAX
1841 default 384000
1842
1843config MSM_CPU_FREQ_MIN
1844 int "Min CPU Frequency"
1845 depends on MSM_CPU_FREQ_SET_MIN_MAX
1846 default 245760
1847
1848endif # CPU_FREQ_MSM
1849
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1850config MSM_AVS_HW
1851 bool "Enable Adaptive Voltage Scaling (AVS)"
1852 default n
1853 help
1854 Enable AVS hardware to fine tune voltage at each frequency. The
1855 AVS hardware blocks associated with each Qualcomm ARMv7 cores can
1856 fine tune the voltages based on the feedback from the ring
1857 oscillators.
1858
1859config MSM_HW3D
1860 tristate "MSM Hardware 3D Register Driver"
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1861 help
1862 Provides access to registers needed by the userspace OpenGL|ES
1863 library.
1864
1865config MSM_ADSP
1866 depends on (ARCH_MSM7X01A || ARCH_MSM7X25 || ARCH_MSM7X27)
1867 tristate "MSM ADSP driver"
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1868 default y
1869 help
1870 Provides access to registers needed by the userspace aDSP library.
1871
1872config ADSP_RPC_VER
1873 hex
1874 default 0x30002 if (ARCH_MSM7X27 || (ARCH_MSM7X25 && AMSS_7X25_VERSION_2009))
1875 default 0x30001 if (ARCH_MSM7X01A || (ARCH_MSM7X25 && AMSS_7X25_VERSION_2008))
1876 depends on MSM_ADSP
1877 help
1878 Select proper ADSP RPC version
1879choice
1880 prompt "ADSP RPC version"
1881
1882 default AMSS_7X25_VERSION_2009
1883
1884 config AMSS_7X25_VERSION_2009
1885 bool "2.0.09"
1886
1887 config AMSS_7X25_VERSION_2008
1888 bool "2.0.08"
1889endchoice
1890
1891config MSM7KV2_AUDIO
1892 bool "MSM7K v2 audio"
Laura Abbott0913ebc2013-04-29 12:56:14 -0700[diff] [blame]1893 depends on ARCH_MSM7X30
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1894 default y
1895 help
1896 Enables QDSP5V2-based audio drivers for audio playbacks and
1897 voice call.
1898
1899config MSM_ADSP_REPORT_EVENTS
1900 bool "Report modem events from the DSP"
1901 default y
1902 depends on (MSM_ADSP || MSM7KV2_AUDIO)
1903 help
1904 Normally, only messages from the aDSP are reported to userspace.
1905 With this option, we report events from the aDSP as well.
1906
1907config MSM_QDSP6
1908 tristate "QDSP6 support"
Laura Abbott0913ebc2013-04-29 12:56:14 -0700[diff] [blame]1909 depends on ARCH_QSD8X50
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1910 default y
1911 help
1912 Enable support for qdsp6. This provides audio and video functionality.
1913
1914config MSM8X60_AUDIO
1915 tristate "MSM8X60 audio support"
Laura Abbott0913ebc2013-04-29 12:56:14 -0700[diff] [blame]1916 depends on ARCH_MSM8X60
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1917 default y
1918 help
1919 Enable support for qdsp6v2. This provides audio functionality.
1920
1921config MSM8X60_FTM_AUDIO_DEVICES
1922 bool "MSM8X60 audio factory test mode support"
1923 depends on MSM8X60_AUDIO
1924 help
1925 Enable support audio factory test mode devices. This is used
1926 in a production line environment.
1927
Ben Romberger45b351c2011-07-20 22:37:27 -0700[diff] [blame]1928config RTAC
1929 bool "MSM8K real-time audio calibration support"
1930 default y
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1931 help
Ben Romberger45b351c2011-07-20 22:37:27 -0700[diff] [blame]1932 Enable support for rtac. This enables calibration during
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1933 audio operation
1934
1935config MSM7X27A_AUDIO
1936 bool "MSM7X27A audio support"
1937 depends on ARCH_MSM7X27A && MSM_ADSP
1938 default n
1939 help
1940 Enable support for 7x27a. This provides audio functionality.
1941
Justin Pauporea6cd2092011-06-22 16:19:45 -0700[diff] [blame]1942config MSM_PROC_COMM_REGULATOR
Gregory Bean1963a2a2010-08-28 10:05:44 -0700[diff] [blame]1943 bool
Justin Pauporea6cd2092011-06-22 16:19:45 -0700[diff] [blame]1944 depends on MSM_PROC_COMM && REGULATOR
1945 help
1946 Enable regulator framework support for regulators managed by PMLIB
1947 on the modem, and controlled through proccomm calls.
1948
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1949config MSM_VREG_SWITCH_INVERTED
1950 bool "Reverse vreg switch polarity"
1951 default n
1952 help
1953 Reverses the enable and disable for vreg switch.
1954
1955config MSM_DMA_TEST
1956 tristate "MSM DMA test module"
1957 default m
1958 help
1959 Intended to be compiled as a module. Provides a device node
1960 and ioctls for testing the MSM dma system.
1961
1962config WIFI_CONTROL_FUNC
1963 bool "Enable WiFi control function abstraction"
1964 help
1965 Enables Power/Reset/Carddetect function abstraction
1966
1967config WIFI_MEM_PREALLOC
1968 depends on WIFI_CONTROL_FUNC
1969 bool "Preallocate memory for WiFi buffers"
1970 help
1971 Preallocates memory buffers for WiFi driver
1972
1973config QSD_AUDIO
1974 bool "QSD audio"
Laura Abbott0913ebc2013-04-29 12:56:14 -0700[diff] [blame]1975 depends on ARCH_MSM_SCORPION && MSM_DALRPC && !MSM_SMP
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]1976 default y
1977 help
1978 Provides PCM, MP3, and AAC audio playback.
1979
1980config AUDIO_AAC_PLUS
1981 depends on (MSM_ADSP || QSD_AUDIO || MSM7KV2_AUDIO)
1982 bool "AAC+ Audio"
1983 default y
1984 help
1985 Provides AAC+ decoding
1986
1987config AUDIO_ENHANCED_AAC_PLUS
1988 depends on AUDIO_AAC_PLUS
1989 bool "Enhanced AAC+ Audio"
1990 default y
1991 help
1992 Provides Enhanced AAC+ decoding
1993
1994config SURF_FFA_GPIO_KEYPAD
1995 bool "MSM SURF/FFA GPIO keypad"
1996 depends on INPUT_GPIO = "y"
1997 default y
1998 help
1999 Select if the GPIO keypad is attached.
2000
2001config MSM_SLEEP_TIME_OVERRIDE
2002 bool "Allow overriding suspend/sleep time with PM module parameter"
2003 default y
2004 help
2005 Enable the module parameter sleep_time_override. Specified
2006 in units of seconds, it overwrites the normal sleep time of
2007 suspend. The feature is required for automated power management
2008 testing.
2009
2010config MSM_MEMORY_LOW_POWER_MODE
2011 bool "Control the low power modes of memory"
2012 default n
2013 help
2014 The application processor controls whether memory should enter
2015 which low power mode.
2016
2017choice
2018 prompt "Default Memory Low Power Mode during Idle"
2019 depends on MSM_MEMORY_LOW_POWER_MODE
2020 default MSM_MEMORY_LOW_POWER_MODE_IDLE_ACTIVE
2021 help
2022 Selects the default low power mode of the memory during idle
2023 sleep.
2024
2025 config MSM_MEMORY_LOW_POWER_MODE_IDLE_ACTIVE
2026 bool "Memory active"
2027
2028 config MSM_MEMORY_LOW_POWER_MODE_IDLE_RETENTION
2029 bool "Memory in retention"
2030
2031 config MSM_MEMORY_LOW_POWER_MODE_IDLE_DEEP_POWER_DOWN
2032 bool "Memory in deep power down"
2033endchoice
2034
2035choice
2036 prompt "Default Memory Low Power Mode during Suspend"
2037 depends on MSM_MEMORY_LOW_POWER_MODE
2038 default MSM_MEMORY_LOW_POWER_MODE_SUSPEND_ACTIVE
2039 help
2040 Selects the default low power mode of the memory during suspend
2041 sleep.
2042
2043 config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_ACTIVE
2044 bool "Memory active"
2045
2046 config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_RETENTION
2047 bool "Memory in retention"
2048
2049 config MSM_MEMORY_LOW_POWER_MODE_SUSPEND_DEEP_POWER_DOWN
2050 bool "Memory in deep power down"
2051endchoice
2052
2053choice
2054 prompt "Power management timeout action"
2055 default MSM_PM_TIMEOUT_HALT
2056 help
2057 Selects the Application Processor's action when Power Management
2058 times out waiting for Modem's handshake.
2059
2060 config MSM_PM_TIMEOUT_HALT
2061 bool "Halt the Application Processor"
2062
2063 config MSM_PM_TIMEOUT_RESET_MODEM
2064 bool "Reset the Modem Processor"
2065
2066 config MSM_PM_TIMEOUT_RESET_CHIP
2067 bool "Reset the entire chip"
2068endchoice
2069
2070config MSM_IDLE_WAIT_ON_MODEM
2071 int "Wait for Modem to become ready for idle power collapse"
2072 default 0
2073 help
2074 If Modem is not ready to handle Application Processor's request
2075 for idle power collapse, wait the number of microseconds in case
2076 Modem becomes ready soon.
2077
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]2078config MSM_RPM_REGULATOR
2079 bool "RPM regulator driver"
Matt Wagantall32dc71e2012-01-04 11:13:11 -0800[diff] [blame]2080 depends on MSM_RPM && REGULATOR
Matt Wagantall9274df92011-12-15 11:11:05 -0800[diff] [blame]2081 help
2082 Compile in support for the RPM regulator driver, used for setting
2083 voltages and other parameters of the various power rails supplied
2084 by some Qualcomm PMICs.
2085
David Collinsc7642322012-04-04 10:19:12 -0700[diff] [blame]2086config MSM_RPM_REGULATOR_SMD
2087 bool "SMD RPM regulator driver"
2088 depends on REGULATOR
2089 depends on OF
2090 depends on MSM_RPM_SMD
2091 help
2092 Compile in support for the SMD RPM regulator driver which is used for
2093 setting voltages and other parameters of the various power rails
2094 supplied by some Qualcomm PMICs. The SMD RPM regulator driver should
2095 be used on systems which contain an RPM which communicates with the
2096 application processor over SMD.
2097
David Collins037d6482013-03-14 16:53:33 -0700[diff] [blame]2098config MSM_SPM_REGULATOR
2099 bool "SPM regulator driver"
2100 depends on REGULATOR && SPMI && OF_SPMI
2101 help
2102 Enable support for the SPM regulator driver which is used for
2103 setting voltages of processor supply regulators via the SPM module
2104 found inside of the MSM chips. The SPM regulator driver can be used
2105 on MSM systems where the APSS processor cores are supplied by their
2106 own PMIC regulator.
2107
Rohit Vaswani5fd759e2012-11-07 07:05:08 -0800[diff] [blame]2108config MSM_SMCMOD
2109 tristate "Secure Monitor Call (SMC) Module"
2110 default n
2111 depends on (ARCH_FSM9XXX && ION && ION_MSM && MSM_SCM)
2112 help
2113 Enable support for smcmod driver. This driver provides a mechanism
2114 to execute the Secure Monitor Call (SMC) to switch from non-secure
2115 to secure execution in the fsm9xxx targets. This module utilizes Ion
2116 for buffer management.
2117
Stephen Boyd01710582012-07-09 13:40:05 -0700[diff] [blame]2118config MSM_SUBSYSTEM_RESTART
2119 bool "MSM Subsystem Restart"
2120 help
2121 This option enables the MSM subsystem restart framework.
2122
2123 The MSM subsystem restart framework provides support to boot,
2124 shutdown, and restart subsystems with a reference counted API.
2125 It also notifies userspace of transitions between these states via
2126 sysfs.
2127
2128config MSM_SYSMON_COMM
2129 bool "MSM System Monitor communication support"
2130 depends on MSM_SMD && MSM_SUBSYSTEM_RESTART
2131 help
2132 This option adds support for MSM System Monitor library, which
2133 provides an API that may be used for notifying subsystems within
2134 the SoC about other subsystems' power-up/down state-changes.
2135
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2136config MSM_PIL
2137 bool "Peripheral image loading"
2138 select FW_LOADER
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2139 default n
2140 help
2141 Some peripherals need to be loaded into memory before they can be
2142 brought out of reset.
2143
2144 Say yes to support these devices.
2145
Stephen Boyd4eb885b2011-09-29 01:16:03 -0700[diff] [blame]2146config MSM_PIL_MODEM
2147 tristate "Modem (ARM11) Boot Support"
Stephen Boyd3ac20732012-05-03 18:46:08 -0700[diff] [blame]2148 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boyd4eb885b2011-09-29 01:16:03 -0700[diff] [blame]2149 help
2150 Support for booting and shutting down ARM11 Modem processors.
2151
Stephen Boyd3acc9e42011-09-28 16:46:40 -0700[diff] [blame]2152config MSM_PIL_QDSP6V3
2153 tristate "QDSP6v3 (Hexagon) Boot Support"
Stephen Boyd2e19d932012-05-09 17:36:04 -0700[diff] [blame]2154 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boyd3acc9e42011-09-28 16:46:40 -0700[diff] [blame]2155 help
2156 Support for booting and shutting down QDSP6v3 processors (hexagon).
2157 The QDSP6 is a low power DSP used in audio software applications.
2158
Stephen Boydbdb53f32012-06-05 18:39:47 -0700[diff] [blame]2159config MSM_PIL_LPASS_QDSP6V4
2160 tristate "LPASS QDSP6v4 (Hexagon) Boot Support"
Stephen Boyda1cf76b2012-06-13 12:05:35 -0700[diff] [blame]2161 depends on MSM_SUBSYSTEM_RESTART
Stephen Boydeb819882011-08-29 14:46:30 -0700[diff] [blame]2162 help
Stephen Boydbdb53f32012-06-05 18:39:47 -0700[diff] [blame]2163 Support for booting and shutting down QDSP6v4 processors (hexagon)
2164 in low power audio subsystems. If you would like to record or
2165 play audio then say Y here.
2166
2167 If unsure, say N.
2168
2169config MSM_PIL_MODEM_QDSP6V4
2170 tristate "Modem QDSP6v4 (Hexagon) Boot Support"
Stephen Boyd2efa9962012-06-12 14:20:12 -0700[diff] [blame]2171 depends on MSM_SUBSYSTEM_RESTART
Stephen Boydbdb53f32012-06-05 18:39:47 -0700[diff] [blame]2172 help
2173 Support for booting and shutting down QDSP6v4 processors (hexagon)
2174 in modem subsystems. If you would like to make or receive phone
2175 calls then say Y here.
2176
2177 If unsure, say N.
Stephen Boydeb819882011-08-29 14:46:30 -0700[diff] [blame]2178
Matt Wagantallc2bbdc32012-03-21 19:44:50 -0700[diff] [blame]2179config MSM_PIL_LPASS_QDSP6V5
Stephen Boyd633eb622012-06-13 12:05:35 -0700[diff] [blame]2180 tristate "LPASS QDSP6v5 (Hexagon) Boot Support"
2181 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
2182 help
2183 Support for booting and shutting down QDSP6v5 (Hexagon) processors
2184 in low power audio subsystems. This driver also monitors the ADSP
2185 SMSM status bits and the ADSP's watchdog interrupt and restarts the
2186 ADSP if the processor encounters a fatal error.
Matt Wagantall4e2599e2012-03-21 22:31:35 -0700[diff] [blame]2187
2188config MSM_PIL_MSS_QDSP6V5
Stephen Boyd3da4fd02012-07-06 10:00:12 -0700[diff] [blame]2189 tristate "MSS QDSP6v5 (Hexagon) Boot Support"
2190 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Matt Wagantalle6e00d52012-03-08 17:39:07 -0800[diff] [blame]2191 help
Stephen Boyd3da4fd02012-07-06 10:00:12 -0700[diff] [blame]2192 Support for booting and shutting down QDSP6v5 (Hexagon) processors
2193 in modem subsystems. If you would like to make or receive phone
2194 calls then say Y here.
2195
2196 If unsure, say N.
Matt Wagantallc2bbdc32012-03-21 19:44:50 -0700[diff] [blame]2197
Stephen Boyd322a9922011-09-20 01:05:54 -0700[diff] [blame]2198config MSM_PIL_RIVA
2199 tristate "RIVA (WCNSS) Boot Support"
Stephen Boydfdec00d2012-05-10 17:04:49 -0700[diff] [blame]2200 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boyd322a9922011-09-20 01:05:54 -0700[diff] [blame]2201 help
2202 Support for booting and shutting down the RIVA processor (WCNSS).
2203 Riva is the wireless subsystem processor used in bluetooth, wireless
2204 LAN, and FM software applications.
2205
Stephen Boydd89eebe2011-09-28 23:28:11 -0700[diff] [blame]2206config MSM_PIL_TZAPPS
2207 tristate "TZApps Boot Support"
Stephen Boyd046013f2012-06-28 20:24:17 -0700[diff] [blame]2208 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boydd89eebe2011-09-28 23:28:11 -0700[diff] [blame]2209 help
2210 Support for booting and shutting down TZApps.
2211
2212 TZApps is an image that runs in the secure processor state. It is
2213 used to decrypt data and perform secure operations on the behalf of
2214 the kernel.
2215
Stephen Boyd25c4a0b2011-09-20 00:12:36 -0700[diff] [blame]2216config MSM_PIL_DSPS
2217 tristate "DSPS Boot Support"
Stephen Boydf169b4b2012-05-10 17:55:55 -0700[diff] [blame]2218 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boyd25c4a0b2011-09-20 00:12:36 -0700[diff] [blame]2219 help
2220 Support for booting and shutting down ARM7 DSPS processors.
2221
2222 DSPS is a sensors offloading processor used for applications such
2223 as rotation detection, temperature, etc.
2224
Stephen Boyd7b973de2012-03-09 12:26:16 -0800[diff] [blame]2225config MSM_PIL_VIDC
2226 tristate "Video Core Secure Boot Support"
Stephen Boyd046013f2012-06-28 20:24:17 -0700[diff] [blame]2227 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Stephen Boyd7b973de2012-03-09 12:26:16 -0800[diff] [blame]2228 help
2229 Support for authenticating the video core image.
2230
Tianyi Gou828798d2012-05-02 21:12:38 -0700[diff] [blame]2231config MSM_PIL_VENUS
2232 tristate "VENUS (Video) Boot Support"
Stephen Boyd046013f2012-06-28 20:24:17 -0700[diff] [blame]2233 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Tianyi Gou828798d2012-05-02 21:12:38 -0700[diff] [blame]2234 help
2235 Support for booting and shutting down the VENUS processor (Video).
2236 Venus is the Video subsystem processor used for video codecs.
2237
Matt Wagantall292aace2012-01-26 19:12:34 -0800[diff] [blame]2238config MSM_PIL_GSS
Stephen Boydd86214b2012-05-10 15:26:35 -0700[diff] [blame]2239 tristate "GSS (Cortex A5) Boot Support"
2240 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Matt Wagantall292aace2012-01-26 19:12:34 -0800[diff] [blame]2241 help
2242 Support for booting and shutting down Cortex A5 processors which run
2243 GPS subsystem firmware.
2244
Tianyi Gouc1e049f82011-11-23 14:20:16 -0800[diff] [blame]2245config MSM_PIL_PRONTO
2246 tristate "PRONTO (WCNSS) Boot Support"
Stephen Boyd581fe852012-06-13 12:05:35 -0700[diff] [blame]2247 depends on MSM_PIL && MSM_SUBSYSTEM_RESTART
Tianyi Gouc1e049f82011-11-23 14:20:16 -0800[diff] [blame]2248 help
2249 Support for booting and shutting down the PRONTO processor (WCNSS).
2250 PRONTO is the wireless subsystem processor used in bluetooth, wireless
2251 LAN, and FM software applications.
2252
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2253config MSM_SCM
2254 bool "Secure Channel Manager (SCM) support"
2255 default n
2256
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2257config SCORPION_Uni_45nm_BUG
2258 bool "Scorpion Uni 45nm(SC45U): Workaround for ICIMVAU and BPIMVA"
2259 depends on ARCH_MSM7X30 || (ARCH_QSD8X50 && MSM_SOC_REV_A)
2260 default y
2261 help
2262 Invalidating the Instruction Cache by Modified Virtual Address to PoU and
2263 invalidating the Branch Predictor Array by Modified Virtual Address can
2264 create invalid entries in the TLB with the wrong ASID values on Scorpion
2265 Uniprocessor 45nm (SC45U) cores. This option enables the recommended software
2266 workaround for Scorpion Uniprocessor 45nm cores.
2267
2268 This bug is not applicable to any ScorpionMP or Scorpion Uni 65nm(SC65U) cores.
2269
Harini Jayaramanef7805f2011-09-28 12:45:31 -0600[diff] [blame]2270config MSM_BUSPM_DEV
2271 tristate "MSM Bus Performance Monitor Kernel Module"
Gagan Mac0d5d49e2012-08-28 19:41:37 -0600[diff] [blame]2272 depends on (ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM8974)
Harini Jayaramanef7805f2011-09-28 12:45:31 -0600[diff] [blame]2273 default m
2274 help
2275 This kernel module is used to mmap() hardware registers for the
2276 performance monitors, counters, etc. The module can also be used to
2277 allocate physical memory which is used by bus performance hardware to
2278 dump performance data.
2279
Mona Hossain11c03ac2011-10-26 12:42:10 -0700[diff] [blame]2280config MSM_TZ_LOG
2281 tristate "MSM Trust Zone (TZ) Log Driver"
2282 depends on DEBUG_FS
2283 help
2284 This option enables a driver with a debugfs interface for messages
2285 produced by the Secure code (Trust zone). These messages provide
2286 diagnostic information about TZ operation.
2287
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2288config MSM_RPM_LOG
2289 tristate "MSM Resource Power Manager Log Driver"
2290 depends on DEBUG_FS
Priyanka Mathur49c60802012-12-13 12:53:58 -0800[diff] [blame]2291 depends on MSM_RPM || MSM_RPM_SMD
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2292 default n
2293 help
2294 This option enables a driver which can read from a circular buffer
2295 of messages produced by the RPM. These messages provide diagnostic
2296 information about RPM operation. The driver outputs the messages
2297 via a debugfs node.
2298
2299config MSM_RPM_STATS_LOG
2300 tristate "MSM Resource Power Manager Stat Driver"
2301 depends on DEBUG_FS
Priyanka Mathur1af9d4b2012-10-30 14:55:44 -0700[diff] [blame]2302 depends on MSM_RPM || MSM_RPM_SMD
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2303 default n
2304 help
2305 This option enables a driver which reads RPM messages from a shared
2306 memory location. These messages provide statistical information about
2307 the low power modes that RPM enters. The drivers outputs the message
2308 via a debugfs node.
2309
Girish Mahadevan898c56d2012-06-05 16:09:19 -0600[diff] [blame]2310config MSM_RPM_RBCPR_STATS_LOG
2311 tristate "MSM Resource Power Manager RPBCPR Stat Driver"
2312 depends on DEBUG_FS
2313 depends on MSM_RPM
2314 help
2315 This option enables a driver which reads RPM messages from a shared
2316 memory location. These messages provide statistical information about
2317 RBCPR (Rapid Bridge Core Power Reduction) information . The drivers
2318 outputs the message via a debugfs node.
2319
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2320config MSM_DIRECT_SCLK_ACCESS
2321 bool "Direct access to the SCLK timer"
2322 default n
2323
2324config IOMMU_API
2325 bool
Gregory Bean1963a2a2010-08-28 10:05:44 -0700[diff] [blame]2326
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]2327config MSM_GPIOMUX
2328 bool
2329
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2330config MSM_SECURE_IO
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]2331 bool
Stepan Moskovchenko0ab847452010-11-12 19:29:57 -0800[diff] [blame]2332
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2333config MSM_NATIVE_RESTART
Stephen Boyd2a1eb582010-08-27 10:01:23 -0700[diff] [blame]2334 bool
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2335
Taniya Dascd1d0232012-07-03 17:50:47 +0530[diff] [blame]2336config MSM_MODEM_RESTART
2337 bool
2338
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]2339config MSM_PM2
2340 depends on PM
2341 bool
2342
2343config MSM_PM8X60
2344 depends on PM
2345 bool
2346
Girish Mahadevan388c3082012-09-10 15:30:36 -0600[diff] [blame]2347config MSM_EVENT_TIMER
2348 bool "Event timer"
2349 help
2350 This option enables a modules that manages a list of event timers that
2351 need to be monitored by the PM. The enables the PM code to monitor
2352 events that require the core to be awake and ready to handle the
2353 event.
2354
Matt Wagantall88b86312012-01-31 16:53:03 -0800[diff] [blame]2355config MSM_NOPM
2356 default y if !PM
2357 bool
2358
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2359config MSM_BUS_SCALING
2360 bool "Bus scaling driver"
2361 default n
2362
Gagan Mac85c70492011-06-10 16:07:47 -0600[diff] [blame]2363config MSM_BUS_RPM_MULTI_TIER_ENABLED
2364 bool "RPM Multi-tiering Configuration"
2365 depends on MSM_BUS_SCALING
2366
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2367config MSM_WATCHDOG
2368 bool "MSM Watchdog Support"
Rohit Vaswanie897f842012-03-19 14:19:34 -0700[diff] [blame]2369 depends on ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM9615 || ARCH_FSM9XXX
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2370 help
2371 This enables the watchdog as is present on 8x60. Currently we use
2372 core 0's watchdog, and reset the entire SoC if it times out. It does
2373 not run during the bootup process, so it will not catch any early
2374 lockups.
2375
Hanumant Singhd1f01022012-07-05 14:21:53 -0700[diff] [blame]2376config MSM_WATCHDOG_V2
2377 bool "MSM Watchdog Support"
2378 help
2379 This enables the watchdog module. It causes kernel panic if the
2380 watchdog times out. It allows for detection of cpu hangs and
2381 deadlocks. It does not run during the bootup process, so it will
2382 not catch any early lockups.
2383
Hanumant Singh5e2541c2012-07-31 14:41:14 -0700[diff] [blame]2384config MSM_MEMORY_DUMP
2385 bool "MSM Memory Dump Support"
2386 help
2387 This enables memory dump feature. It allows various client
2388 subsystems to register respective dump regions. At the time
2389 of deadlocks or cpu hangs these dump regions are captured to
2390 give a snapshot of the system at the time of the crash.
2391
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2392config MSM_DLOAD_MODE
2393 bool "Enable download mode on crashes"
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2394 default n
2395 help
2396 This makes the SoC enter download mode when it resets
2397 due to a kernel panic. Note that this doesn't by itself
2398 make the kernel reboot on a kernel panic - that must be
2399 enabled via another mechanism.
2400
Pratik Patel17f3b822011-11-21 12:41:47 -0800[diff] [blame]2401config MSM_JTAG
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2402 bool "Debug and ETM trace support across power collapse"
Pratik Patelfd6f56a2011-10-10 17:47:55 -0700[diff] [blame]2403 help
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2404 Enables support for debugging (specifically breakpoints) and ETM
Pratik Patel2963de42012-05-17 12:43:40 -0700[diff] [blame]2405 processor tracing across power collapse both for JTag and OS hosted
2406 software running on the target. Enabling this will ensure debug
2407 and ETM registers are saved and restored across power collapse.
2408
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2409 If unsure, say 'N' here to avoid potential power, performance and
2410 memory penalty.
Pratik Patel7831c082011-06-08 21:44:37 -0700[diff] [blame]2411
Pushkar Joshi64cae782012-12-15 18:59:03 -0800[diff] [blame]2412config MSM_JTAG_MM
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2413 bool "Debug and ETM trace support across power collapse using memory mapped access"
Pushkar Joshi64cae782012-12-15 18:59:03 -0800[diff] [blame]2414 help
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2415 Enables support for debugging (specifically breakpoints) and ETM
2416 processor tracing across power collapse both for JTag and OS hosted
2417 software running on the target. Enabling this will ensure debug
2418 and ETM registers are saved and restored across power collapse.
Pushkar Joshi64cae782012-12-15 18:59:03 -0800[diff] [blame]2419
Pratik Patel61e91702013-01-27 20:30:42 -0800[diff] [blame]2420 Required on targets on which cp14 access to debug and ETM registers is
2421 not permitted and so memory mapped access is necessary.
2422
2423 If unsure, say 'N' here to avoid potential power, performance and
2424 memory penalty.
Pushkar Joshi64cae782012-12-15 18:59:03 -0800[diff] [blame]2425
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2426config MSM_ETM
2427 tristate "Enable MSM ETM and ETB"
Pratik Patel17f3b822011-11-21 12:41:47 -0800[diff] [blame]2428 depends on ARCH_MSM8X60
2429 select MSM_JTAG
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2430 help
Pratik Patel17f3b822011-11-21 12:41:47 -0800[diff] [blame]2431 Enables embedded trace collection on MSM8660
Pratik Patel7831c082011-06-08 21:44:37 -0700[diff] [blame]2432
Lynus Vazdde09ee2012-01-05 13:28:22 +0530[diff] [blame]2433config MSM_SLEEP_STATS_DEVICE
2434 bool "Enable exporting of MSM sleep device stats to userspace"
2435
Krishna Vanka7f563ff2012-03-20 22:04:19 +0530[diff] [blame]2436config MSM_RUN_QUEUE_STATS
2437 bool "Enable collection and exporting of MSM Run Queue stats to userspace"
Subbaraman Narayanamurthy0b148fc2012-11-28 12:14:12 -0800[diff] [blame]2438 default n
Krishna Vankae2922052012-03-02 09:59:12 +0530[diff] [blame]2439 help
2440 This option enalbes statistics collection on Run Queue. A daemon
2441 in user mode, called MPDecision will be using this data to decide
2442 on when to switch off/on the other cores.
Krishna Vanka7f563ff2012-03-20 22:04:19 +0530[diff] [blame]2443
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2444config MSM_STANDALONE_POWER_COLLAPSE
2445 bool "Enable standalone power collapse"
2446 default n
2447
2448config MSM_GSBI9_UART
2449 bool "Enable GSBI9 UART device"
2450 default n
2451 help
2452 This enables GSBI9 configured into UART.
2453
2454config MSM_SHARED_GPIO_FOR_UART2DM
2455 bool "Use shared GPIOs into UART mode"
2456 depends on (ARCH_MSM7X27A && !MMC_MSM_SDC3_8_BIT_SUPPORT && !MMC_MSM_SDC4_SUPPORT)
2457 help
2458 This option configures GPIO muxed with SDC4/MMC3
2459 8-bit mode into UART mode. It is used for serial
2460 console on UART2DM. Say Y if you want to have
2461 serial console on UART2DM.
2462
2463config MSM_SHOW_RESUME_IRQ
2464 bool "Enable logging of interrupts that could have caused resume"
Bryan Huntsmancc147032011-11-23 13:03:56 -0800[diff] [blame]2465 depends on (ARM_GIC || PMIC8058)
2466 default y if PMIC8058
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2467 default n
2468 help
2469 This option logs wake up interrupts that have triggered just before
2470 the resume loop unrolls. Say Y if you want to debug why the system
2471 resumed.
2472
2473config BT_MSM_PINTEST
2474 tristate "MSM Bluetooth Pin Connectivity Test"
2475 depends on ((ARCH_MSM8X60 || ARCH_MSM7X27A) && DEBUG_FS)
2476 default n
2477 help
2478 Bluetooth MSM Pin Connectivity test module.
2479 This driver provides support for verifying the MSM to BT pin
2480 connectivity.
2481
2482config MSM_FAKE_BATTERY
2483 depends on POWER_SUPPLY
2484 default n
2485 bool "MSM Fake Battery"
2486 help
2487 Enables MSM fake battery driver.
2488
2489config MSM_QDSP6_APR
2490 bool "Audio QDSP6 APR support"
2491 depends on MSM_SMD
2492 default n
2493 help
2494 Enable APR IPC protocol support between
2495 application processor and QDSP6. APR is
2496 used by audio driver to configure QDSP6's
2497 ASM, ADM and AFE.
2498
Joonwoo Park91d95462012-08-02 10:55:54 -0700[diff] [blame]2499config MSM_QDSP6_APRV2
2500 bool "Audio QDSP6 APRv2 support"
2501 depends on MSM_SMD
2502 default n
2503 help
2504 Enable APRv2 IPC protocol support between
2505 application processor and QDSP6. APR is
2506 used by audio driver to configure QDSP6's
2507 ASM, ADM and AFE.
2508
Harmandeep Singhc35fa07d2012-05-31 07:08:59 -0700[diff] [blame]2509config MSM_QDSP6_CODECS
2510 bool "Audio Codecs on QDSP6 APR "
2511 depends on MSM_SMD
2512 default n
2513 help
2514 Enable Audio codecs with APR IPC protocol support between
2515 application processor and QDSP6. APR is
2516 used by audio driver to configure QDSP6's
2517 ASM, ADM and AFE.
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2518
Harmandeep Singhe5ddfe32012-05-26 09:39:25 -0700[diff] [blame]2519config MSM_QDSP6V2_CODECS
2520 bool "Audio QDSP6V2 APR support"
2521 depends on MSM_SMD
2522 help
2523 Enable Audio codecs with APR IPC protocol support between
2524 application processor and QDSP6 for B-family. APR is
2525 used by audio driver to configure QDSP6's
2526 ASM, ADM and AFE.
2527
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2528config MSM_AUDIO_QDSP6
2529 bool "QDSP6 HW Audio support"
2530 select SND_SOC_MSM_QDSP6_INTF
2531 default n
2532 help
2533 Enable HW audio support in QDSP6.
2534 QDSP6 can support HW encoder & decoder and audio processing
2535
Harmandeep Singhe5ddfe32012-05-26 09:39:25 -0700[diff] [blame]2536config MSM_AUDIO_QDSP6V2
2537 bool "QDSP6V2 HW Audio support"
2538 select SND_SOC_MSM_QDSP6V2_INTF
2539 help
2540 Enable HW audio support in QDSP6V2.
2541 QDSP6V2 can support HW encoder & decoder and
2542 audio processing. It will enable support for
2543 AAC, AMRNB, AMRWB, EVRC, MP3, QCELP among
2544 others.
2545
Joonwoo Park4a14a552012-08-02 11:03:21 -0700[diff] [blame]2546config MSM_ADSP_LOADER
2547 tristate "ADSP loader support"
2548 select SND_SOC_MSM_APRV2_INTF
2549 depends on MSM_AUDIO_QDSP6V2 && m
2550 help
2551 Enable ADSP image loader.
2552 The ADSP loader brings ADSP out of reset
2553 for the platforms that use APRv2.
2554 Say M if you want to enable this module.
2555
Baruch Eruchimovitch258b3472012-10-14 21:46:35 +0200[diff] [blame]2556config MSM_ULTRASOUND_A
2557 bool "QDSP6 HW Ultrasound support"
Baruch Eruchimovitche9cbfc12011-10-09 19:47:08 +0200[diff] [blame]2558 help
Baruch Eruchimovitch258b3472012-10-14 21:46:35 +0200[diff] [blame]2559 Enable HW ultrasound support in QDSP6.
2560 QDSP6 can support HW encoder & decoder and
2561 ultrasound processing. It will enable
2562 ultrasound data paths between
2563 HW and services, calculating input events
2564 upon the ultrasound data.
Baruch Eruchimovitche9cbfc12011-10-09 19:47:08 +0200[diff] [blame]2565
Baruch Eruchimovitch8c3f7802013-01-05 22:48:04 +0200[diff] [blame]2566config MSM_ULTRASOUND_B
2567 bool "QDSP6V2 HW Ultrasound support"
2568 help
2569 Enable HW Ultrasound support in QDSP6V2.
2570 QDSP6V2 can support HW encoder & decoder and
2571 ultrasound processing. It will enable
2572 ultrasound data paths between
2573 HW and services, calculating input events
2574 upon the ultrasound data.
2575
Bryan Huntsman3f2bc4d2011-08-16 17:27:22 -0700[diff] [blame]2576config MSM_RPC_VIBRATOR
2577 bool "RPC based MSM Vibrator Support"
2578 depends on MSM_ONCRPCROUTER
2579 help
2580 Enable the vibrator support on MSM over RPC. The vibrator
2581 is connected on the PMIC. Say Y if you want to enable this
2582 feature.
2583
2584config PM8XXX_RPC_VIBRATOR
2585 bool "RPC based Vibrator on PM8xxx PMICs"
2586 depends on MSM_RPC_VIBRATOR
2587 help
2588 Enable the vibrator support on MSM over RPC. The vibrator
2589 is connected on the PM8XXX PMIC. Say Y if you want to enable
2590 this feature.
2591
2592config MSM_SPM_V1
2593 bool "Driver support for SPM Version 1"
2594 help
2595 Enables the support for Version 1 of the SPM driver. SPM hardware is
2596 used to manage the processor power during sleep. The driver allows
2597 configuring SPM to allow different power modes.
2598
2599config MSM_SPM_V2
2600 bool "Driver support for SPM Version 2"
2601 help
2602 Enables the support for Version 2 of the SPM driver. SPM hardware is
2603 used to manage the processor power during sleep. The driver allows
2604 configuring SPM to allow different power modes.
2605
2606config MSM_L2_SPM
2607 bool "SPM support for L2 cache"
2608 depends on MSM_SPM_V2
2609 help
2610 Enable SPM driver support for L2 cache. Some MSM chipsets allow
2611 control of L2 cache low power mode with a Subsystem Power manager.
2612 Enabling this driver allows configuring L2 SPM for low power modes
2613 on supported chipsets.
2614
Laura Abbott2d1760b2011-09-29 21:31:24 -0700[diff] [blame]2615config MSM_MULTIMEDIA_USE_ION
2616 bool "Multimedia suport using Ion"
2617 depends on ION_MSM
2618 help
2619 Enable support for multimedia drivers using Ion for buffer management
2620 instead of pmem. Selecting this may also involve userspace
2621 dependencies as well.
2622
Naveen Ramaraj51f5e8b2012-04-09 15:58:40 -0700[diff] [blame]2623config MSM_OCMEM
2624 bool "MSM On-Chip memory driver (OCMEM)"
2625 help
2626 Enable support for On-Chip Memory available on certain MSM chipsets.
2627 OCMEM is a low latency, high performance pool shared by subsystems.
2628
Naveen Ramaraj99b07562012-05-28 20:57:09 -0700[diff] [blame]2629config MSM_OCMEM_LOCAL_POWER_CTRL
2630 bool "OCMEM Local Power Control"
2631 depends on MSM_OCMEM
2632 help
2633 Enable direct power management of the OCMEM core by the
2634 OCMEM driver. By default power management is delegated to
2635 the RPM. Selecting this option causes the OCMEM driver to
2636 directly handle the various macro power transitions.
2637
2638config MSM_OCMEM_DEBUG
2639 bool "OCMEM Debug Support"
2640 depends on MSM_OCMEM
2641 help
2642 Enable debug options for On-chip Memory (OCMEM) driver.
2643 Various debug options include memory, power and latency.
2644 Choosing one of these options allows debugging of each
2645 individual subsystem separately.
2646
Naveen Ramarajc71b2de2012-08-20 12:35:52 -0700[diff] [blame]2647config MSM_OCMEM_NONSECURE
2648 bool "OCMEM Non Secure Mode"
2649 depends on MSM_OCMEM_DEBUG
2650 help
2651 Disable OCMEM interaction with secure processor.
2652 By default OCMEM is secured and accesses for each master
2653 is requested by the OCMEM driver. Selecting this option
2654 causes the OCMEM memory to be in non-secure state unless
2655 its locked down by the secure processor.
2656
Naveen Ramaraj99b07562012-05-28 20:57:09 -0700[diff] [blame]2657config MSM_OCMEM_POWER_DEBUG
2658 bool "OCMEM Power Debug Support"
2659 depends on MSM_OCMEM_DEBUG
2660 help
2661 Enable debug support for OCMEM power management.
2662 This adds support for verifying all power management
2663 related operations of OCMEM. Both local power management
2664 and RPM assisted power management operations are supported.
2665
Naveen Ramaraj4b1d9392012-08-06 21:05:14 -0700[diff] [blame]2666config MSM_OCMEM_POWER_DISABLE
2667 bool "OCMEM Disable Power Control"
2668 depends on MSM_OCMEM_DEBUG
2669 help
2670 Disable all OCMEM power management.
2671 This keeps all OCMEM macros turned ON at all times thus
2672 never allowing them to be turned OFF. Both local power
2673 management and RPM assisted power modes are supported.
2674
Naveen Ramaraj88f23632012-10-10 12:23:29 -0700[diff] [blame]2675config SENSORS_ADSP
2676 bool "Enable Sensors Driver Support for ADSP"
2677 help
2678 Add support for sensors ADSP driver.
2679 This driver is used for exercising different sensors use cases,
2680 such as for lower-power OCMEM use cases, and for time syncing
2681 with ADSP clock.
2682
Laura Abbottad340ff2012-01-04 14:23:48 -0800[diff] [blame]2683config MSM_RTB
2684 bool "Register tracing"
2685 help
2686 Add support for logging different events to a small uncached
2687 region. This is designed to aid in debugging reset cases where the
2688 caches may not be flushed before the target resets.
2689
2690config MSM_RTB_SEPARATE_CPUS
2691 bool "Separate entries for each cpu"
2692 depends on MSM_RTB
Laura Abbott9959f982012-02-28 11:30:50 -0800[diff] [blame]2693 depends on SMP
Laura Abbottad340ff2012-01-04 14:23:48 -0800[diff] [blame]2694 help
2695 Under some circumstances, it may be beneficial to give dedicated space
2696 for each cpu to log accesses. Selecting this option will log each cpu
2697 separately. This will guarantee that the last acesses for each cpu
2698 will be logged but there will be fewer entries per cpu
2699
Stepan Moskovchenko57884842012-06-07 17:35:49 -0700[diff] [blame]2700config MSM_EBI_ERP
2701 bool "External Bus Interface (EBI) error reporting"
2702 help
2703 Say 'Y' here to enable reporting of external bus interface errors to
2704 the kernel log. Information such as the offending address and
2705 transaction type will be logged. This may be useful for debugging
2706 seemingly broken memory accesses.
2707
2708 For production builds, you should probably say 'N' here.
2709
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2710config MSM_CACHE_ERP
2711 bool "Cache / CPU error reporting"
2712 depends on ARCH_MSM_KRAIT
2713 help
2714 Say 'Y' here to enable reporting of cache and TLB errors to the kernel
2715 log. Enabling this feature can be used as a system debugging technique
2716 if cache corruption is suspected. Cache error statistics will also be
2717 reported in /proc/cpu/msm_cache_erp.
2718
2719 For production builds, you should probably say 'N' here.
2720
2721config MSM_L1_ERR_PANIC
Stepan Moskovchenko1b0c1742012-04-30 14:53:16 -0700[diff] [blame]2722 bool "Panic on L1 cache errors"
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2723 depends on MSM_CACHE_ERP
2724 help
Stepan Moskovchenko1b0c1742012-04-30 14:53:16 -0700[diff] [blame]2725 To cause the kernel to panic whenever an L1 cache error is detected, say
2726 'Y' here. This may be useful as a debugging technique if general system
2727 instability is suspected.
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2728
2729 For production builds, you should probably say 'N' here.
2730
Stepan Moskovchenkoe1aba3d2012-12-06 18:40:25 -0800[diff] [blame]2731config MSM_L1_RECOV_ERR_PANIC
2732 bool "Panic on recoverable L1 cache errors"
2733 depends on MSM_CACHE_ERP && MSM_L1_ERR_PANIC
2734 help
2735 Certain CPU designs may be able to automatically recover from certain
2736 kinds of L1 cache errors, even though the L1 cache itself may not
2737 support error correction. These errors should not result in any kind
2738 of corruption, but their presence is nevertheless an indication of
2739 poor system health. To cause the kernel to panic whenever a
2740 recoverable L1 cache error is detected, say 'Y' here. This may be
2741 useful as a debugging technique if general system instability is
2742 suspected.
2743
2744 For production builds, you should definitely say 'N' here.
2745
Stepan Moskovchenko7035f652012-05-31 17:48:01 -0700[diff] [blame]2746config MSM_L1_ERR_LOG
2747 bool "Log CPU ERP events to system memory"
2748 depends on MSM_CACHE_ERP
2749 help
2750 Enable logging CPU ERP events to an area of memory that will be
2751 preserved across a system reset. This may be useful for detecting and
2752 troubleshooting ERP-related system crashes in the field.
2753
2754 For production builds, you may want to say 'Y' here.
2755
Stepan Moskovchenkoe9a5dc12012-04-03 20:25:49 -0700[diff] [blame]2756config MSM_L2_ERP_PRINT_ACCESS_ERRORS
2757 bool "Report L2 master port slave/decode errors in kernel log"
2758 depends on MSM_CACHE_ERP
2759 help
2760 Master port errors can occur when a memory request is not properly
2761 handled by the destination slave. This can occur if the destination
2762 register does not exist or is inaccessible due to security
2763 restrictions or (in some cases) clock configuration. Enabling this
2764 option will cause a backtrace to be printed to the kernel log whenever
2765 such an error is encountered. Note that the error is reported as an
2766 interrupt rather than as an exception, meaning that the backtrace may
2767 have some skid. This option may help with debugging, though production
2768 builds should probably say 'N' here.
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2769
2770config MSM_L2_ERP_PORT_PANIC
2771 bool "Panic on L2 master port errors"
Stepan Moskovchenkoe9a5dc12012-04-03 20:25:49 -0700[diff] [blame]2772 depends on MSM_CACHE_ERP && MSM_L2_ERP_PRINT_ACCESS_ERRORS
Stepan Moskovchenko07552e12012-02-29 20:09:32 -0800[diff] [blame]2773 help
2774 Master port errors can occur when a memory request is not properly
2775 handled by the destination slave. Enable this option to catch drivers
2776 which attempt to access bad areas of the address space, or access
2777 hardware registers in an improper state (such as certain clocks not
2778 being on). This option may help with debugging, though production
2779 builds should probably say 'N' here.
2780
2781config MSM_L2_ERP_1BIT_PANIC
2782 bool "Panic on recoverable L2 soft errors"
2783 depends on MSM_CACHE_ERP
2784 help
2785 Enable this option to cause a kernel panic whenever the L2 cache
2786 encounters a single-bit (correctable) soft error. This option should
2787 only be enabled when doing low-level debugging where cache corruption
2788 is suspected.
2789
2790 For production builds, you should definitely say 'N' here.
2791
2792config MSM_L2_ERP_2BIT_PANIC
2793 bool "Panic on unrecoverable L2 soft errors"
2794 depends on MSM_CACHE_ERP
2795 help
2796 Enable this option to cause a kernel panic whenever the L2 cache
2797 encounters a double-bit (non-correctable) soft error. Debug builds
2798 will likely benefit from having this option enabled to catch cache
2799 problems as soon as possible.
2800
2801 For production builds, it may be acceptable to say 'N' here, since
2802 an uncorrectable error might not necessarily cause further problems.
Laura Abbottad340ff2012-01-04 14:23:48 -0800[diff] [blame]2803
Praveen Chidambaramf53ef1b2011-12-06 08:27:49 -0700[diff] [blame]2804config MSM_DCVS
2805 bool "Use MSM DCVS for CPU/GPU Frequency control"
2806 depends on MSM_SCM
2807 help
2808 Enable support for MSM DCVS to control all CPU and GPU core frequencies.
2809 The DCVS manager allows idle driver to feed the idle information to the
2810 algorithm and the algorithm returns a frequency for the core which is
2811 passed to the frequency change driver.
2812
Pankaj Kumar32ce1ea2012-04-04 20:29:29 +0530[diff] [blame]2813config MSM_CPR
2814 tristate "Use MSM CPR in S/W mode"
2815 help
2816 Enable CPR (core power reduction) in S/W mode, where the processor
2817 get's the notification from CPR block and programs the PMIC.
2818
2819config MSM_VP_REGULATOR
2820 tristate "Use MSM PMIC8029 C2 regulator"
2821 depends on ARCH_MSM8625
2822 help
2823 Enable MSM PMIC8029 C2 regulator support using APC_PLEVEL access
2824 for MSMs like 8625.
2825
Taniya Dasc43e6872012-03-21 16:41:14 +0530[diff] [blame]2826config HAVE_ARCH_HAS_CURRENT_TIMER
2827 bool
Laura Abbott306bcc22012-03-08 11:24:53 -0800[diff] [blame]2828
2829config MSM_CACHE_DUMP
2830 bool "Cache dumping support"
2831 help
2832 Add infrastructure to dump the L1 and L2 caches to an allocated buffer.
2833 This allows for analysis of the caches in case cache corruption is
2834 suspected.
2835
Laura Abbott7b637362012-03-29 16:43:49 -0700[diff] [blame]2836config MSM_CACHE_DUMP_ON_PANIC
2837 bool "Dump caches on panic"
2838 depends on MSM_CACHE_DUMP
2839 help
2840 By default, the caches are flushed on panic. This means that trying to
2841 look at them in a RAM dump will give useless data. Select this if you
2842 want to dump the L1 and L2 caches on panic before any flush occurs.
2843 If unsure, say N
2844
Jack Phamccbbfab2012-04-09 19:50:20 -0700[diff] [blame]2845config MSM_HSIC_SYSMON
2846 tristate "MSM HSIC system monitor driver"
2847 depends on USB
2848 help
2849 Add support for bridging with the system monitor interface of MDM
2850 over HSIC. This driver allows the local system monitor to
2851 communicate with the remote system monitor interface.
2852
2853config MSM_HSIC_SYSMON_TEST
2854 tristate "MSM HSIC system monitor bridge test"
2855 depends on USB && MSM_HSIC_SYSMON && DEBUG_FS
2856 help
2857 Enable the test hook for the Qualcomm system monitor HSIC driver.
2858 This will create a debugfs file entry named "hsic_sysmon_test" which
2859 can be read and written to send character data to the sysmon port of
2860 the modem over USB.
2861
Anirudh Ghayal0d2291a2012-09-20 21:31:41 +0530[diff] [blame]2862config MSM_RPC_PMIC
2863 tristate "MSM RPC PMIC driver"
2864 depends on MSM_ONCRPCROUTER
2865 help
2866 This driver supports the PMIC functionality over RPC for those MSM's
2867 which do not have a direct access to PMIC. It supports ability to
2868 configure MPP, GPIO and all the other supported peripherals of the
2869 PMIC.
2870
Anirudh Ghayald3a63732012-09-20 22:13:13 +0530[diff] [blame]2871config MSM_RPC_USB
2872 tristate "MSM RPC USB driver"
2873 depends on MSM_ONCRPCROUTER
2874 help
2875 This driver supports the USB configuration support over the RPC
2876 interface. It support the HS USB module connected to the MSM
2877 and FS USB which is connected over the PMIC. This support is
2878 required for MSMs on which the APPS does not have a direct access
2879 to the PMIC.
2880
2881config MSM_RPC_PMAPP
2882 tristate "MSM RPC PMIC APP driver"
2883 depends on MSM_ONCRPCROUTER
2884 help
2885 This driver supports the configuration of various PMIC APP modules
2886 such as display backlight, vreg pin-ctrl, smps clock over the RPC
2887 interface. This support is required for MSMs on which the APPS
2888 does not have a direct access to the PMIC.
Pushkar Joshi0fc73462012-09-26 17:59:31 -0700[diff] [blame]2889
2890config MSM_ENABLE_WDOG_DEBUG_CONTROL
Pratik Patele08204d2013-03-12 17:43:56 -0700[diff] [blame]2891 bool "Enable control of watchdog debug and boot partition select"
Pushkar Joshi0fc73462012-09-26 17:59:31 -0700[diff] [blame]2892 help
Pratik Patele08204d2013-03-12 17:43:56 -0700[diff] [blame]2893 Enables support for controlling watchdog debug and boot partition
2894 select. This is currently used to bypass debug image for PS_HOLD reset
2895 by disabling watchdog debug and boot partition select. This allows
2896 for a clean MSM reset for reboot scenarios.
Taniya Dasea4263f92012-08-22 18:52:51 +0530[diff] [blame]2897
2898config MSM_FIQ
2899 bool "Enable FIQ for debugging"
2900 depends on ARCH_MSM8625
2901 select FIQ
Taniya Das36e4aa12012-07-04 18:27:16 +0530[diff] [blame]2902 select GIC_SECURE
Taniya Dasea4263f92012-08-22 18:52:51 +0530[diff] [blame]2903 help
2904 Enable any line to be used as an FIQ. This will help debugging
2905 if apps is not responding and holding lock with irqs disabled.
2906 Modem will then generate an raise a FIQ on this line before sending
2907 SMSM reset.
Greg Reidb1d240a2012-10-12 12:20:31 -0400[diff] [blame]2908
2909config MSM_USE_USER_ACCESSIBLE_TIMERS
2910 bool "Enables mapping an MSM timer counter page to user space."
2911 depends on ARM_USE_USER_ACCESSIBLE_TIMERS
2912 help
2913 Enables MSM-specific user accessible timers via a shared
2914 memory page containing the cycle counter.
2915
Sidipotu Ashokbf84d4d2012-11-06 17:13:28 +0530[diff] [blame]2916config USE_DEV_CTRL_VOLUME
2917 bool "Use Device Control Volume"
2918 help
2919 Use Device Control Volume as opposed to ALSA volume control.
2920
Jay Chokshi06e444f2012-12-06 20:48:23 -0800[diff] [blame]2921config MSM_CPU_PWRCTL
2922 bool "Ensures that krait droop detectors are always off"
2923 help
2924 Droop detector mechanism can adversely affect krait plls during
2925 stand alone power collapse operation. Selecting this option
2926 ensures that they are always off.
2927
Saket Saurabh6089f952012-12-07 15:49:13 +0530[diff] [blame]2928config MSM_UARTDM_Core_v14
2929 bool "Use MSM BLSP based HSUART Core v1.4"
2930 depends on SERIAL_MSM_HS
2931 help
2932 Select if BLSP based UART Core v.14 or higher is present.
Abhimanyu Kapurcf3ed152013-03-01 19:32:19 -0800[diff] [blame]2933
2934config MSM_BOOT_STATS
2935 bool "Use MSM boot stats reporting"
2936 help
2937 Use this to report msm boot stats such as bootloader throughput,
2938 display init, total boot time.
2939 This figures are reported in mpm sleep clock cycles and have a
2940 resolution of 31 bits as 1 bit is used as an overflow check.
Syed Rameez Mustafa37f93472013-03-18 15:49:48 -0700[diff] [blame]2941
2942config MSM_XPU_ERR_FATAL
2943 bool "Configure XPU violations as fatal errors"
2944 help
2945 Select if XPU violations have to be configured as fatal errors.
Willie Ruan2635a852013-03-17 16:33:42 -0700[diff] [blame]2946
2947config MSM_CPR_REGULATOR
2948 bool "RBCPR regulator driver for APC"
2949 depends on REGULATOR
2950 depends on OF
2951 help
2952 Compile in RBCPR (RapidBridge Core Power Reduction) driver to support
2953 corner vote for APC power rail. The driver takes PTE process voltage
2954 suggestions in efuse as initial settings. It converts corner vote
2955 to voltage value before writing to a voltage regulator API, such as
2956 that provided by spm-regulator driver.
Brian Swetland9e73c842007-11-26 04:12:13 -0800[diff] [blame]2957endif