blob: 5987da857103ea461e6abd692a84de8959fe03e3 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * scsi_lib.c Copyright (C) 1999 Eric Youngdale
3 *
4 * SCSI queueing library.
5 * Initial versions: Eric Youngdale (eric@andante.org).
6 * Based upon conversations with large numbers
7 * of people at Linux Expo.
8 */
9
10#include <linux/bio.h>
James Bottomleyd3f46f32008-01-15 11:11:46 -060011#include <linux/bitops.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070012#include <linux/blkdev.h>
13#include <linux/completion.h>
14#include <linux/kernel.h>
15#include <linux/mempool.h>
16#include <linux/slab.h>
17#include <linux/init.h>
18#include <linux/pci.h>
19#include <linux/delay.h>
James Bottomleyfaead262006-02-14 10:42:07 -060020#include <linux/hardirq.h>
Jens Axboec6132da2007-10-16 11:08:49 +020021#include <linux/scatterlist.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070022
23#include <scsi/scsi.h>
Christoph Hellwigbeb40482006-06-10 18:01:03 +020024#include <scsi/scsi_cmnd.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070025#include <scsi/scsi_dbg.h>
26#include <scsi/scsi_device.h>
27#include <scsi/scsi_driver.h>
28#include <scsi/scsi_eh.h>
29#include <scsi/scsi_host.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070030
31#include "scsi_priv.h"
32#include "scsi_logging.h"
33
34
Tobias Klauser6391a112006-06-08 22:23:48 -070035#define SG_MEMPOOL_NR ARRAY_SIZE(scsi_sg_pools)
Jens Axboe59725112007-04-02 10:06:42 +020036#define SG_MEMPOOL_SIZE 2
Linus Torvalds1da177e2005-04-16 15:20:36 -070037
38struct scsi_host_sg_pool {
39 size_t size;
Jens Axboea8474ce2007-08-07 09:02:51 +020040 char *name;
Christoph Lametere18b8902006-12-06 20:33:20 -080041 struct kmem_cache *slab;
Linus Torvalds1da177e2005-04-16 15:20:36 -070042 mempool_t *pool;
43};
44
James Bottomleyd3f46f32008-01-15 11:11:46 -060045#define SP(x) { x, "sgpool-" __stringify(x) }
46#if (SCSI_MAX_SG_SEGMENTS < 32)
47#error SCSI_MAX_SG_SEGMENTS is too small (must be 32 or greater)
48#endif
Adrian Bunk52c1da32005-06-23 22:05:33 -070049static struct scsi_host_sg_pool scsi_sg_pools[] = {
Linus Torvalds1da177e2005-04-16 15:20:36 -070050 SP(8),
51 SP(16),
FUJITA Tomonorifd820f42007-09-18 12:14:37 +020052#if (SCSI_MAX_SG_SEGMENTS > 32)
James Bottomleyd3f46f32008-01-15 11:11:46 -060053 SP(32),
FUJITA Tomonorifd820f42007-09-18 12:14:37 +020054#if (SCSI_MAX_SG_SEGMENTS > 64)
James Bottomleyd3f46f32008-01-15 11:11:46 -060055 SP(64),
56#if (SCSI_MAX_SG_SEGMENTS > 128)
Linus Torvalds1da177e2005-04-16 15:20:36 -070057 SP(128),
James Bottomleyd3f46f32008-01-15 11:11:46 -060058#if (SCSI_MAX_SG_SEGMENTS > 256)
59#error SCSI_MAX_SG_SEGMENTS is too large (256 MAX)
FUJITA Tomonorifd820f42007-09-18 12:14:37 +020060#endif
61#endif
62#endif
James Bottomleyd3f46f32008-01-15 11:11:46 -060063#endif
64 SP(SCSI_MAX_SG_SEGMENTS)
Jens Axboea8474ce2007-08-07 09:02:51 +020065};
Linus Torvalds1da177e2005-04-16 15:20:36 -070066#undef SP
67
Martin K. Petersen7027ad72008-07-17 17:08:48 -040068struct kmem_cache *scsi_sdb_cache;
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +020069
Tejun Heo a1bf9d12005-04-24 02:08:52 -050070static void scsi_run_queue(struct request_queue *q);
James Bottomleye91442b2005-09-09 10:44:16 -050071
72/*
73 * Function: scsi_unprep_request()
74 *
75 * Purpose: Remove all preparation done for a request, including its
76 * associated scsi_cmnd, so that it can be requeued.
77 *
78 * Arguments: req - request to unprepare
79 *
80 * Lock status: Assumed that no locks are held upon entry.
81 *
82 * Returns: Nothing.
83 */
84static void scsi_unprep_request(struct request *req)
85{
86 struct scsi_cmnd *cmd = req->special;
87
Jens Axboe4aff5e22006-08-10 08:44:47 +020088 req->cmd_flags &= ~REQ_DONTPREP;
Christoph Hellwigbeb40482006-06-10 18:01:03 +020089 req->special = NULL;
James Bottomleye91442b2005-09-09 10:44:16 -050090
James Bottomleye91442b2005-09-09 10:44:16 -050091 scsi_put_command(cmd);
92}
Tejun Heo a1bf9d12005-04-24 02:08:52 -050093
James Bottomley4f5299a2009-01-02 10:42:21 -060094/**
95 * __scsi_queue_insert - private queue insertion
96 * @cmd: The SCSI command being requeued
97 * @reason: The reason for the requeue
98 * @unbusy: Whether the queue should be unbusied
Linus Torvalds1da177e2005-04-16 15:20:36 -070099 *
James Bottomley4f5299a2009-01-02 10:42:21 -0600100 * This is a private queue insertion. The public interface
101 * scsi_queue_insert() always assumes the queue should be unbusied
102 * because it's always called before the completion. This function is
103 * for a requeue after completion, which should only occur in this
104 * file.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700105 */
James Bottomley4f5299a2009-01-02 10:42:21 -0600106static int __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700107{
108 struct Scsi_Host *host = cmd->device->host;
109 struct scsi_device *device = cmd->device;
Mike Christief0c0a372008-08-17 15:24:38 -0500110 struct scsi_target *starget = scsi_target(device);
Tejun Heo a1bf9d12005-04-24 02:08:52 -0500111 struct request_queue *q = device->request_queue;
112 unsigned long flags;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700113
114 SCSI_LOG_MLQUEUE(1,
115 printk("Inserting command %p into mlqueue\n", cmd));
116
117 /*
Tejun Heo d8c37e72005-05-14 00:46:08 +0900118 * Set the appropriate busy bit for the device/host.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700119 *
120 * If the host/device isn't busy, assume that something actually
121 * completed, and that we should be able to queue a command now.
122 *
123 * Note that the prior mid-layer assumption that any host could
124 * always queue at least one command is now broken. The mid-layer
125 * will implement a user specifiable stall (see
126 * scsi_host.max_host_blocked and scsi_device.max_device_blocked)
127 * if a command is requeued with no other commands outstanding
128 * either for the device or for the host.
129 */
Mike Christief0c0a372008-08-17 15:24:38 -0500130 switch (reason) {
131 case SCSI_MLQUEUE_HOST_BUSY:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700132 host->host_blocked = host->max_host_blocked;
Mike Christief0c0a372008-08-17 15:24:38 -0500133 break;
134 case SCSI_MLQUEUE_DEVICE_BUSY:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700135 device->device_blocked = device->max_device_blocked;
Mike Christief0c0a372008-08-17 15:24:38 -0500136 break;
137 case SCSI_MLQUEUE_TARGET_BUSY:
138 starget->target_blocked = starget->max_target_blocked;
139 break;
140 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700141
142 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700143 * Decrement the counters, since these commands are no longer
144 * active on the host/device.
145 */
James Bottomley4f5299a2009-01-02 10:42:21 -0600146 if (unbusy)
147 scsi_device_unbusy(device);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700148
149 /*
Tejun Heo a1bf9d12005-04-24 02:08:52 -0500150 * Requeue this command. It will go before all other commands
151 * that are already in the queue.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700152 *
153 * NOTE: there is magic here about the way the queue is plugged if
154 * we have no outstanding commands.
155 *
Tejun Heo a1bf9d12005-04-24 02:08:52 -0500156 * Although we *don't* plug the queue, we call the request
Linus Torvalds1da177e2005-04-16 15:20:36 -0700157 * function. The SCSI request function detects the blocked condition
158 * and plugs the queue appropriately.
Tejun Heo a1bf9d12005-04-24 02:08:52 -0500159 */
160 spin_lock_irqsave(q->queue_lock, flags);
James Bottomley59897da2005-09-14 12:57:42 -0400161 blk_requeue_request(q, cmd->request);
Tejun Heo a1bf9d12005-04-24 02:08:52 -0500162 spin_unlock_irqrestore(q->queue_lock, flags);
163
164 scsi_run_queue(q);
165
Linus Torvalds1da177e2005-04-16 15:20:36 -0700166 return 0;
167}
168
James Bottomley4f5299a2009-01-02 10:42:21 -0600169/*
170 * Function: scsi_queue_insert()
171 *
172 * Purpose: Insert a command in the midlevel queue.
173 *
174 * Arguments: cmd - command that we are adding to queue.
175 * reason - why we are inserting command to queue.
176 *
177 * Lock status: Assumed that lock is not held upon entry.
178 *
179 * Returns: Nothing.
180 *
181 * Notes: We do this for one of two cases. Either the host is busy
182 * and it cannot accept any more commands for the time being,
183 * or the device returned QUEUE_FULL and can accept no more
184 * commands.
185 * Notes: This could be called either from an interrupt context or a
186 * normal process context.
187 */
188int scsi_queue_insert(struct scsi_cmnd *cmd, int reason)
189{
190 return __scsi_queue_insert(cmd, reason, 1);
191}
James Bottomley39216032005-06-15 18:48:29 -0500192/**
James Bottomley33aa6872005-08-28 11:31:14 -0500193 * scsi_execute - insert request and wait for the result
James Bottomley39216032005-06-15 18:48:29 -0500194 * @sdev: scsi device
195 * @cmd: scsi command
196 * @data_direction: data direction
197 * @buffer: data buffer
198 * @bufflen: len of buffer
199 * @sense: optional sense buffer
200 * @timeout: request timeout in seconds
201 * @retries: number of times to retry request
James Bottomley33aa6872005-08-28 11:31:14 -0500202 * @flags: or into request flags;
FUJITA Tomonorif4f4e472008-12-04 14:24:39 +0900203 * @resid: optional residual length
James Bottomley39216032005-06-15 18:48:29 -0500204 *
Michael Opdenacker59c51592007-05-09 08:57:56 +0200205 * returns the req->errors value which is the scsi_cmnd result
James Bottomleyea73a9f2005-08-28 11:33:52 -0500206 * field.
Rob Landleyeb448202007-11-03 13:30:39 -0500207 */
James Bottomley33aa6872005-08-28 11:31:14 -0500208int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
209 int data_direction, void *buffer, unsigned bufflen,
FUJITA Tomonorif4f4e472008-12-04 14:24:39 +0900210 unsigned char *sense, int timeout, int retries, int flags,
211 int *resid)
James Bottomley39216032005-06-15 18:48:29 -0500212{
213 struct request *req;
214 int write = (data_direction == DMA_TO_DEVICE);
215 int ret = DRIVER_ERROR << 24;
216
217 req = blk_get_request(sdev->request_queue, write, __GFP_WAIT);
218
219 if (bufflen && blk_rq_map_kern(sdev->request_queue, req,
220 buffer, bufflen, __GFP_WAIT))
221 goto out;
222
223 req->cmd_len = COMMAND_SIZE(cmd[0]);
224 memcpy(req->cmd, cmd, req->cmd_len);
225 req->sense = sense;
226 req->sense_len = 0;
Mike Christie17e01f22005-11-11 05:31:37 -0600227 req->retries = retries;
James Bottomley39216032005-06-15 18:48:29 -0500228 req->timeout = timeout;
Jens Axboe4aff5e22006-08-10 08:44:47 +0200229 req->cmd_type = REQ_TYPE_BLOCK_PC;
230 req->cmd_flags |= flags | REQ_QUIET | REQ_PREEMPT;
James Bottomley39216032005-06-15 18:48:29 -0500231
232 /*
233 * head injection *required* here otherwise quiesce won't work
234 */
235 blk_execute_rq(req->q, NULL, req, 1);
236
Alan Sternbdb2b8c2008-06-24 14:03:14 -0400237 /*
238 * Some devices (USB mass-storage in particular) may transfer
239 * garbage data together with a residue indicating that the data
240 * is invalid. Prevent the garbage from being misinterpreted
241 * and prevent security leaks by zeroing out the excess data.
242 */
Tejun Heoc3a4d782009-05-07 22:24:37 +0900243 if (unlikely(req->resid_len > 0 && req->resid_len <= bufflen))
244 memset(buffer + (bufflen - req->resid_len), 0, req->resid_len);
Alan Sternbdb2b8c2008-06-24 14:03:14 -0400245
FUJITA Tomonorif4f4e472008-12-04 14:24:39 +0900246 if (resid)
Tejun Heoc3a4d782009-05-07 22:24:37 +0900247 *resid = req->resid_len;
James Bottomley39216032005-06-15 18:48:29 -0500248 ret = req->errors;
249 out:
250 blk_put_request(req);
251
252 return ret;
253}
James Bottomley33aa6872005-08-28 11:31:14 -0500254EXPORT_SYMBOL(scsi_execute);
James Bottomley39216032005-06-15 18:48:29 -0500255
James Bottomleyea73a9f2005-08-28 11:33:52 -0500256
257int scsi_execute_req(struct scsi_device *sdev, const unsigned char *cmd,
258 int data_direction, void *buffer, unsigned bufflen,
FUJITA Tomonorif4f4e472008-12-04 14:24:39 +0900259 struct scsi_sense_hdr *sshdr, int timeout, int retries,
260 int *resid)
James Bottomleyea73a9f2005-08-28 11:33:52 -0500261{
262 char *sense = NULL;
akpm@osdl.org1ccb48b2005-06-26 00:12:51 -0700263 int result;
264
James Bottomleyea73a9f2005-08-28 11:33:52 -0500265 if (sshdr) {
Jes Sorensen24669f752006-01-16 10:31:18 -0500266 sense = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO);
James Bottomleyea73a9f2005-08-28 11:33:52 -0500267 if (!sense)
268 return DRIVER_ERROR << 24;
James Bottomleyea73a9f2005-08-28 11:33:52 -0500269 }
akpm@osdl.org1ccb48b2005-06-26 00:12:51 -0700270 result = scsi_execute(sdev, cmd, data_direction, buffer, bufflen,
FUJITA Tomonorif4f4e472008-12-04 14:24:39 +0900271 sense, timeout, retries, 0, resid);
James Bottomleyea73a9f2005-08-28 11:33:52 -0500272 if (sshdr)
James Bottomleye5143852005-08-09 11:55:36 -0500273 scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, sshdr);
James Bottomleyea73a9f2005-08-28 11:33:52 -0500274
275 kfree(sense);
276 return result;
277}
278EXPORT_SYMBOL(scsi_execute_req);
279
Linus Torvalds1da177e2005-04-16 15:20:36 -0700280/*
281 * Function: scsi_init_cmd_errh()
282 *
283 * Purpose: Initialize cmd fields related to error handling.
284 *
285 * Arguments: cmd - command that is ready to be queued.
286 *
Linus Torvalds1da177e2005-04-16 15:20:36 -0700287 * Notes: This function has the job of initializing a number of
288 * fields related to error handling. Typically this will
289 * be called once for each command, as required.
290 */
Christoph Hellwig631c2282006-07-08 20:42:15 +0200291static void scsi_init_cmd_errh(struct scsi_cmnd *cmd)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700292{
Linus Torvalds1da177e2005-04-16 15:20:36 -0700293 cmd->serial_number = 0;
Boaz Harrosh30b0c372007-12-13 13:47:40 +0200294 scsi_set_resid(cmd, 0);
FUJITA Tomonorib80ca4f2008-01-13 15:46:13 +0900295 memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700296 if (cmd->cmd_len == 0)
Boaz Harroshdb4742d2008-04-30 11:27:26 +0300297 cmd->cmd_len = scsi_command_size(cmd->cmnd);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700298}
299
300void scsi_device_unbusy(struct scsi_device *sdev)
301{
302 struct Scsi_Host *shost = sdev->host;
Mike Christief0c0a372008-08-17 15:24:38 -0500303 struct scsi_target *starget = scsi_target(sdev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700304 unsigned long flags;
305
306 spin_lock_irqsave(shost->host_lock, flags);
307 shost->host_busy--;
Mike Christief0c0a372008-08-17 15:24:38 -0500308 starget->target_busy--;
James Bottomley939647e2005-09-18 15:05:20 -0500309 if (unlikely(scsi_host_in_recovery(shost) &&
Tejun Heoee7863b2006-05-15 20:57:20 +0900310 (shost->host_failed || shost->host_eh_scheduled)))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700311 scsi_eh_wakeup(shost);
312 spin_unlock(shost->host_lock);
152587d2005-04-12 16:22:06 -0500313 spin_lock(sdev->request_queue->queue_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700314 sdev->device_busy--;
152587d2005-04-12 16:22:06 -0500315 spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700316}
317
318/*
319 * Called for single_lun devices on IO completion. Clear starget_sdev_user,
320 * and call blk_run_queue for all the scsi_devices on the target -
321 * including current_sdev first.
322 *
323 * Called with *no* scsi locks held.
324 */
325static void scsi_single_lun_run(struct scsi_device *current_sdev)
326{
327 struct Scsi_Host *shost = current_sdev->host;
328 struct scsi_device *sdev, *tmp;
329 struct scsi_target *starget = scsi_target(current_sdev);
330 unsigned long flags;
331
332 spin_lock_irqsave(shost->host_lock, flags);
333 starget->starget_sdev_user = NULL;
334 spin_unlock_irqrestore(shost->host_lock, flags);
335
336 /*
337 * Call blk_run_queue for all LUNs on the target, starting with
338 * current_sdev. We race with others (to set starget_sdev_user),
339 * but in most cases, we will be first. Ideally, each LU on the
340 * target would get some limited time or requests on the target.
341 */
342 blk_run_queue(current_sdev->request_queue);
343
344 spin_lock_irqsave(shost->host_lock, flags);
345 if (starget->starget_sdev_user)
346 goto out;
347 list_for_each_entry_safe(sdev, tmp, &starget->devices,
348 same_target_siblings) {
349 if (sdev == current_sdev)
350 continue;
351 if (scsi_device_get(sdev))
352 continue;
353
354 spin_unlock_irqrestore(shost->host_lock, flags);
355 blk_run_queue(sdev->request_queue);
356 spin_lock_irqsave(shost->host_lock, flags);
357
358 scsi_device_put(sdev);
359 }
360 out:
361 spin_unlock_irqrestore(shost->host_lock, flags);
362}
363
Kiyoshi Ueda9d112512008-10-04 14:11:06 -0400364static inline int scsi_device_is_busy(struct scsi_device *sdev)
365{
366 if (sdev->device_busy >= sdev->queue_depth || sdev->device_blocked)
367 return 1;
368
369 return 0;
370}
371
Mike Christief0c0a372008-08-17 15:24:38 -0500372static inline int scsi_target_is_busy(struct scsi_target *starget)
373{
374 return ((starget->can_queue > 0 &&
375 starget->target_busy >= starget->can_queue) ||
376 starget->target_blocked);
377}
378
Kiyoshi Ueda9d112512008-10-04 14:11:06 -0400379static inline int scsi_host_is_busy(struct Scsi_Host *shost)
380{
381 if ((shost->can_queue > 0 && shost->host_busy >= shost->can_queue) ||
382 shost->host_blocked || shost->host_self_blocked)
383 return 1;
384
385 return 0;
386}
387
Linus Torvalds1da177e2005-04-16 15:20:36 -0700388/*
389 * Function: scsi_run_queue()
390 *
391 * Purpose: Select a proper request queue to serve next
392 *
393 * Arguments: q - last request's queue
394 *
395 * Returns: Nothing
396 *
397 * Notes: The previous command was completely finished, start
398 * a new one if possible.
399 */
400static void scsi_run_queue(struct request_queue *q)
401{
Mike Christie2a3a59e2008-11-11 13:42:35 -0600402 struct scsi_device *sdev = q->queuedata;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700403 struct Scsi_Host *shost = sdev->host;
Mike Christie2a3a59e2008-11-11 13:42:35 -0600404 LIST_HEAD(starved_list);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700405 unsigned long flags;
406
Tony Battersby25d7c362007-11-12 10:00:44 -0500407 if (scsi_target(sdev)->single_lun)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700408 scsi_single_lun_run(sdev);
409
410 spin_lock_irqsave(shost->host_lock, flags);
Mike Christie2a3a59e2008-11-11 13:42:35 -0600411 list_splice_init(&shost->starved_list, &starved_list);
412
413 while (!list_empty(&starved_list)) {
Nick Piggin75ad23b2008-04-29 14:48:33 +0200414 int flagset;
415
Linus Torvalds1da177e2005-04-16 15:20:36 -0700416 /*
417 * As long as shost is accepting commands and we have
418 * starved queues, call blk_run_queue. scsi_request_fn
419 * drops the queue_lock and can add us back to the
420 * starved_list.
421 *
422 * host_lock protects the starved_list and starved_entry.
423 * scsi_request_fn must get the host_lock before checking
424 * or modifying starved_list or starved_entry.
425 */
Mike Christie2a3a59e2008-11-11 13:42:35 -0600426 if (scsi_host_is_busy(shost))
Mike Christief0c0a372008-08-17 15:24:38 -0500427 break;
Mike Christief0c0a372008-08-17 15:24:38 -0500428
Mike Christie2a3a59e2008-11-11 13:42:35 -0600429 sdev = list_entry(starved_list.next,
430 struct scsi_device, starved_entry);
431 list_del_init(&sdev->starved_entry);
Mike Christief0c0a372008-08-17 15:24:38 -0500432 if (scsi_target_is_busy(scsi_target(sdev))) {
433 list_move_tail(&sdev->starved_entry,
434 &shost->starved_list);
435 continue;
436 }
437
Nick Piggin75ad23b2008-04-29 14:48:33 +0200438 spin_unlock(shost->host_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700439
Nick Piggin75ad23b2008-04-29 14:48:33 +0200440 spin_lock(sdev->request_queue->queue_lock);
441 flagset = test_bit(QUEUE_FLAG_REENTER, &q->queue_flags) &&
442 !test_bit(QUEUE_FLAG_REENTER,
443 &sdev->request_queue->queue_flags);
444 if (flagset)
445 queue_flag_set(QUEUE_FLAG_REENTER, sdev->request_queue);
446 __blk_run_queue(sdev->request_queue);
447 if (flagset)
448 queue_flag_clear(QUEUE_FLAG_REENTER, sdev->request_queue);
449 spin_unlock(sdev->request_queue->queue_lock);
Andreas Herrmann04846f22006-08-09 17:31:16 +0200450
Nick Piggin75ad23b2008-04-29 14:48:33 +0200451 spin_lock(shost->host_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700452 }
Mike Christie2a3a59e2008-11-11 13:42:35 -0600453 /* put any unprocessed entries back */
454 list_splice(&starved_list, &shost->starved_list);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700455 spin_unlock_irqrestore(shost->host_lock, flags);
456
457 blk_run_queue(q);
458}
459
460/*
461 * Function: scsi_requeue_command()
462 *
463 * Purpose: Handle post-processing of completed commands.
464 *
465 * Arguments: q - queue to operate on
466 * cmd - command that may need to be requeued.
467 *
468 * Returns: Nothing
469 *
470 * Notes: After command completion, there may be blocks left
471 * over which weren't finished by the previous command
472 * this can be for a number of reasons - the main one is
473 * I/O errors in the middle of the request, in which case
474 * we need to request the blocks that come after the bad
475 * sector.
James Bottomleye91442b2005-09-09 10:44:16 -0500476 * Notes: Upon return, cmd is a stale pointer.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700477 */
478static void scsi_requeue_command(struct request_queue *q, struct scsi_cmnd *cmd)
479{
James Bottomleye91442b2005-09-09 10:44:16 -0500480 struct request *req = cmd->request;
Tejun Heo 283369c2005-04-24 02:06:36 -0500481 unsigned long flags;
482
Tejun Heo 283369c2005-04-24 02:06:36 -0500483 spin_lock_irqsave(q->queue_lock, flags);
James Bottomley02bd3492008-12-12 13:28:29 -0600484 scsi_unprep_request(req);
James Bottomleye91442b2005-09-09 10:44:16 -0500485 blk_requeue_request(q, req);
Tejun Heo 283369c2005-04-24 02:06:36 -0500486 spin_unlock_irqrestore(q->queue_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700487
488 scsi_run_queue(q);
489}
490
491void scsi_next_command(struct scsi_cmnd *cmd)
492{
Linus Torvalds49d7bc62005-12-12 11:25:04 -0800493 struct scsi_device *sdev = cmd->device;
494 struct request_queue *q = sdev->request_queue;
495
496 /* need to hold a reference on the device before we let go of the cmd */
497 get_device(&sdev->sdev_gendev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700498
499 scsi_put_command(cmd);
500 scsi_run_queue(q);
Linus Torvalds49d7bc62005-12-12 11:25:04 -0800501
502 /* ok to remove device now */
503 put_device(&sdev->sdev_gendev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700504}
505
506void scsi_run_host_queues(struct Scsi_Host *shost)
507{
508 struct scsi_device *sdev;
509
510 shost_for_each_device(sdev, shost)
511 scsi_run_queue(sdev->request_queue);
512}
513
James Bottomley79ed2422009-01-06 13:15:20 -0600514static void __scsi_release_buffers(struct scsi_cmnd *, int);
515
Linus Torvalds1da177e2005-04-16 15:20:36 -0700516/*
517 * Function: scsi_end_request()
518 *
519 * Purpose: Post-processing of completed commands (usually invoked at end
520 * of upper level post-processing and scsi_io_completion).
521 *
522 * Arguments: cmd - command that is complete.
Kiyoshi Ueda610d8b02007-12-11 17:52:09 -0500523 * error - 0 if I/O indicates success, < 0 for I/O error.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700524 * bytes - number of bytes of completed I/O
525 * requeue - indicates whether we should requeue leftovers.
526 *
527 * Lock status: Assumed that lock is not held upon entry.
528 *
James Bottomleye91442b2005-09-09 10:44:16 -0500529 * Returns: cmd if requeue required, NULL otherwise.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700530 *
531 * Notes: This is called for block device requests in order to
532 * mark some number of sectors as complete.
533 *
534 * We are guaranteeing that the request queue will be goosed
535 * at some point during this call.
James Bottomleye91442b2005-09-09 10:44:16 -0500536 * Notes: If cmd was requeued, upon return it will be a stale pointer.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700537 */
Kiyoshi Ueda610d8b02007-12-11 17:52:09 -0500538static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int error,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700539 int bytes, int requeue)
540{
Jens Axboe165125e2007-07-24 09:28:11 +0200541 struct request_queue *q = cmd->device->request_queue;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700542 struct request *req = cmd->request;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700543
544 /*
545 * If there are blocks left over at the end, set up the command
546 * to queue the remainder of them.
547 */
Kiyoshi Ueda610d8b02007-12-11 17:52:09 -0500548 if (blk_end_request(req, error, bytes)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700549 /* kill remainder if no retrys */
Mike Christie4a274462008-08-19 18:45:31 -0500550 if (error && scsi_noretry_cmd(cmd))
Tejun Heoe4588242009-05-12 08:49:32 +0200551 blk_end_request_all(req, error);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700552 else {
James Bottomleye91442b2005-09-09 10:44:16 -0500553 if (requeue) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700554 /*
555 * Bleah. Leftovers again. Stick the
556 * leftovers in the front of the
557 * queue, and goose the queue again.
558 */
James Bottomley79ed2422009-01-06 13:15:20 -0600559 scsi_release_buffers(cmd);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700560 scsi_requeue_command(q, cmd);
James Bottomleye91442b2005-09-09 10:44:16 -0500561 cmd = NULL;
562 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700563 return cmd;
564 }
565 }
566
Linus Torvalds1da177e2005-04-16 15:20:36 -0700567 /*
568 * This will goose the queue request function at the end, so we don't
569 * need to worry about launching another command.
570 */
James Bottomley79ed2422009-01-06 13:15:20 -0600571 __scsi_release_buffers(cmd, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700572 scsi_next_command(cmd);
573 return NULL;
574}
575
Jens Axboea8474ce2007-08-07 09:02:51 +0200576static inline unsigned int scsi_sgtable_index(unsigned short nents)
577{
578 unsigned int index;
579
James Bottomleyd3f46f32008-01-15 11:11:46 -0600580 BUG_ON(nents > SCSI_MAX_SG_SEGMENTS);
581
582 if (nents <= 8)
Jens Axboea8474ce2007-08-07 09:02:51 +0200583 index = 0;
James Bottomleyd3f46f32008-01-15 11:11:46 -0600584 else
585 index = get_count_order(nents) - 3;
Jens Axboea8474ce2007-08-07 09:02:51 +0200586
587 return index;
588}
589
Jens Axboe5ed79592007-11-15 09:13:11 +0100590static void scsi_sg_free(struct scatterlist *sgl, unsigned int nents)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700591{
592 struct scsi_host_sg_pool *sgp;
Jens Axboe5ed79592007-11-15 09:13:11 +0100593
594 sgp = scsi_sg_pools + scsi_sgtable_index(nents);
595 mempool_free(sgl, sgp->pool);
596}
597
598static struct scatterlist *scsi_sg_alloc(unsigned int nents, gfp_t gfp_mask)
599{
600 struct scsi_host_sg_pool *sgp;
601
602 sgp = scsi_sg_pools + scsi_sgtable_index(nents);
603 return mempool_alloc(sgp->pool, gfp_mask);
604}
605
Boaz Harrosh30b0c372007-12-13 13:47:40 +0200606static int scsi_alloc_sgtable(struct scsi_data_buffer *sdb, int nents,
607 gfp_t gfp_mask)
Jens Axboe5ed79592007-11-15 09:13:11 +0100608{
609 int ret;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700610
Boaz Harrosh30b0c372007-12-13 13:47:40 +0200611 BUG_ON(!nents);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700612
Boaz Harrosh30b0c372007-12-13 13:47:40 +0200613 ret = __sg_alloc_table(&sdb->table, nents, SCSI_MAX_SG_SEGMENTS,
614 gfp_mask, scsi_sg_alloc);
Jens Axboe5ed79592007-11-15 09:13:11 +0100615 if (unlikely(ret))
Boaz Harrosh30b0c372007-12-13 13:47:40 +0200616 __sg_free_table(&sdb->table, SCSI_MAX_SG_SEGMENTS,
James Bottomley7cedb1f2008-01-13 14:15:28 -0600617 scsi_sg_free);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700618
Jens Axboea8474ce2007-08-07 09:02:51 +0200619 return ret;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700620}
621
Boaz Harrosh30b0c372007-12-13 13:47:40 +0200622static void scsi_free_sgtable(struct scsi_data_buffer *sdb)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700623{
Boaz Harrosh30b0c372007-12-13 13:47:40 +0200624 __sg_free_table(&sdb->table, SCSI_MAX_SG_SEGMENTS, scsi_sg_free);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700625}
626
James Bottomley79ed2422009-01-06 13:15:20 -0600627static void __scsi_release_buffers(struct scsi_cmnd *cmd, int do_bidi_check)
628{
629
630 if (cmd->sdb.table.nents)
631 scsi_free_sgtable(&cmd->sdb);
632
633 memset(&cmd->sdb, 0, sizeof(cmd->sdb));
634
635 if (do_bidi_check && scsi_bidi_cmnd(cmd)) {
636 struct scsi_data_buffer *bidi_sdb =
637 cmd->request->next_rq->special;
638 scsi_free_sgtable(bidi_sdb);
639 kmem_cache_free(scsi_sdb_cache, bidi_sdb);
640 cmd->request->next_rq->special = NULL;
641 }
642
643 if (scsi_prot_sg_count(cmd))
644 scsi_free_sgtable(cmd->prot_sdb);
645}
646
Linus Torvalds1da177e2005-04-16 15:20:36 -0700647/*
648 * Function: scsi_release_buffers()
649 *
650 * Purpose: Completion processing for block device I/O requests.
651 *
652 * Arguments: cmd - command that we are bailing.
653 *
654 * Lock status: Assumed that no lock is held upon entry.
655 *
656 * Returns: Nothing
657 *
658 * Notes: In the event that an upper level driver rejects a
659 * command, we must release resources allocated during
660 * the __init_io() function. Primarily this would involve
661 * the scatter-gather table, and potentially any bounce
662 * buffers.
663 */
Boaz Harroshbb52d822007-12-13 16:14:27 -0800664void scsi_release_buffers(struct scsi_cmnd *cmd)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700665{
James Bottomley79ed2422009-01-06 13:15:20 -0600666 __scsi_release_buffers(cmd, 1);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700667}
Boaz Harroshbb52d822007-12-13 16:14:27 -0800668EXPORT_SYMBOL(scsi_release_buffers);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700669
670/*
671 * Function: scsi_io_completion()
672 *
673 * Purpose: Completion processing for block device I/O requests.
674 *
675 * Arguments: cmd - command that is finished.
676 *
677 * Lock status: Assumed that no lock is held upon entry.
678 *
679 * Returns: Nothing
680 *
681 * Notes: This function is matched in terms of capabilities to
682 * the function that created the scatter-gather list.
683 * In other words, if there are no bounce buffers
684 * (the normal case for most drivers), we don't need
685 * the logic to deal with cleaning up afterwards.
686 *
Alan Sternb60af5b2008-11-03 15:56:47 -0500687 * We must call scsi_end_request(). This will finish off
688 * the specified number of sectors. If we are done, the
689 * command block will be released and the queue function
690 * will be goosed. If we are not done then we have to
691 * figure out what to do next:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700692 *
Alan Sternb60af5b2008-11-03 15:56:47 -0500693 * a) We can call scsi_requeue_command(). The request
694 * will be unprepared and put back on the queue. Then
695 * a new command will be created for it. This should
696 * be used if we made forward progress, or if we want
697 * to switch from READ(10) to READ(6) for example.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700698 *
Alan Sternb60af5b2008-11-03 15:56:47 -0500699 * b) We can call scsi_queue_insert(). The request will
700 * be put back on the queue and retried using the same
701 * command as before, possibly after a delay.
702 *
703 * c) We can call blk_end_request() with -EIO to fail
704 * the remainder of the request.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700705 */
Luben Tuikov03aba2f2006-06-23 09:39:09 -0700706void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700707{
708 int result = cmd->result;
Jens Axboe165125e2007-07-24 09:28:11 +0200709 struct request_queue *q = cmd->device->request_queue;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700710 struct request *req = cmd->request;
James Bottomleyfa8e36c2008-04-02 18:11:52 -0500711 int error = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700712 struct scsi_sense_hdr sshdr;
713 int sense_valid = 0;
714 int sense_deferred = 0;
Alan Sternb60af5b2008-11-03 15:56:47 -0500715 enum {ACTION_FAIL, ACTION_REPREP, ACTION_RETRY,
716 ACTION_DELAYED_RETRY} action;
717 char *description = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700718
Linus Torvalds1da177e2005-04-16 15:20:36 -0700719 if (result) {
720 sense_valid = scsi_command_normalize_sense(cmd, &sshdr);
721 if (sense_valid)
722 sense_deferred = scsi_sense_is_deferred(&sshdr);
723 }
Christoph Hellwig631c2282006-07-08 20:42:15 +0200724
Linus Torvalds1da177e2005-04-16 15:20:36 -0700725 if (blk_pc_request(req)) { /* SG_IO ioctl from block level */
726 req->errors = result;
727 if (result) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700728 if (sense_valid && req->sense) {
729 /*
730 * SG_IO wants current and deferred errors
731 */
732 int len = 8 + cmd->sense_buffer[7];
733
734 if (len > SCSI_SENSE_BUFFERSIZE)
735 len = SCSI_SENSE_BUFFERSIZE;
736 memcpy(req->sense, cmd->sense_buffer, len);
737 req->sense_len = len;
738 }
James Bottomleyfa8e36c2008-04-02 18:11:52 -0500739 if (!sense_deferred)
740 error = -EIO;
Pete Wyckoffb22f6872007-03-13 16:53:28 -0400741 }
FUJITA Tomonorie6bb7a92009-05-11 17:56:08 +0900742
743 req->resid_len = scsi_get_resid(cmd);
744
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +0200745 if (scsi_bidi_cmnd(cmd)) {
FUJITA Tomonorie6bb7a92009-05-11 17:56:08 +0900746 /*
747 * Bidi commands Must be complete as a whole,
748 * both sides at once.
749 */
750 req->next_rq->resid_len = scsi_in(cmd)->resid;
751
752 blk_end_request_all(req, 0);
753
754 scsi_release_buffers(cmd);
755 scsi_next_command(cmd);
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +0200756 return;
757 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700758 }
759
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +0200760 BUG_ON(blk_bidi_rq(req)); /* bidi not support for !blk_pc_request yet */
Boaz Harrosh30b0c372007-12-13 13:47:40 +0200761
Linus Torvalds1da177e2005-04-16 15:20:36 -0700762 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700763 * Next deal with any sectors which we were able to correctly
764 * handle.
765 */
Tejun Heo83096eb2009-05-07 22:24:39 +0900766 SCSI_LOG_HLCOMPLETE(1, printk("%u sectors total, "
James Bottomleyd6b0c532006-07-02 10:06:28 -0500767 "%d bytes done.\n",
Tejun Heo83096eb2009-05-07 22:24:39 +0900768 blk_rq_sectors(req), good_bytes));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700769
James Bottomleya9bddd72009-03-30 16:55:51 +0000770 /*
771 * Recovered errors need reporting, but they're always treated
772 * as success, so fiddle the result code here. For BLOCK_PC
773 * we already took a copy of the original into rq->errors which
774 * is what gets returned to the user
775 */
776 if (sense_valid && sshdr.sense_key == RECOVERED_ERROR) {
777 if (!(req->cmd_flags & REQ_QUIET))
778 scsi_print_sense("", cmd);
779 result = 0;
780 /* BLOCK_PC may have set error */
781 error = 0;
782 }
783
784 /*
785 * A number of bytes were successfully read. If there
James Bottomleyd6b0c532006-07-02 10:06:28 -0500786 * are leftovers and there is some kind of error
787 * (result != 0), retry the rest.
788 */
James Bottomleyfa8e36c2008-04-02 18:11:52 -0500789 if (scsi_end_request(cmd, error, good_bytes, result == 0) == NULL)
James Bottomleyd6b0c532006-07-02 10:06:28 -0500790 return;
Luben Tuikov03aba2f2006-06-23 09:39:09 -0700791
Martin K. Petersen3e695f82009-01-04 03:04:31 -0500792 error = -EIO;
793
Alan Sternb60af5b2008-11-03 15:56:47 -0500794 if (host_byte(result) == DID_RESET) {
795 /* Third party bus reset or reset for error recovery
796 * reasons. Just retry the command and see what
797 * happens.
798 */
799 action = ACTION_RETRY;
800 } else if (sense_valid && !sense_deferred) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700801 switch (sshdr.sense_key) {
802 case UNIT_ATTENTION:
803 if (cmd->device->removable) {
Luben Tuikov03aba2f2006-06-23 09:39:09 -0700804 /* Detected disc change. Set a bit
Linus Torvalds1da177e2005-04-16 15:20:36 -0700805 * and quietly refuse further access.
806 */
807 cmd->device->changed = 1;
Alan Sternb60af5b2008-11-03 15:56:47 -0500808 description = "Media Changed";
809 action = ACTION_FAIL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700810 } else {
Luben Tuikov03aba2f2006-06-23 09:39:09 -0700811 /* Must have been a power glitch, or a
812 * bus reset. Could not have been a
813 * media change, so we just retry the
Alan Sternb60af5b2008-11-03 15:56:47 -0500814 * command and see what happens.
Luben Tuikov03aba2f2006-06-23 09:39:09 -0700815 */
Alan Sternb60af5b2008-11-03 15:56:47 -0500816 action = ACTION_RETRY;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700817 }
818 break;
819 case ILLEGAL_REQUEST:
Luben Tuikov03aba2f2006-06-23 09:39:09 -0700820 /* If we had an ILLEGAL REQUEST returned, then
821 * we may have performed an unsupported
822 * command. The only thing this should be
823 * would be a ten byte read where only a six
824 * byte read was supported. Also, on a system
825 * where READ CAPACITY failed, we may have
826 * read past the end of the disk.
827 */
Jens Axboe26a68012005-11-29 21:03:34 +0100828 if ((cmd->device->use_10_for_rw &&
829 sshdr.asc == 0x20 && sshdr.ascq == 0x00) &&
Linus Torvalds1da177e2005-04-16 15:20:36 -0700830 (cmd->cmnd[0] == READ_10 ||
831 cmd->cmnd[0] == WRITE_10)) {
Alan Sternb60af5b2008-11-03 15:56:47 -0500832 /* This will issue a new 6-byte command. */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700833 cmd->device->use_10_for_rw = 0;
Alan Sternb60af5b2008-11-03 15:56:47 -0500834 action = ACTION_REPREP;
Martin K. Petersen3e695f82009-01-04 03:04:31 -0500835 } else if (sshdr.asc == 0x10) /* DIX */ {
836 description = "Host Data Integrity Failure";
837 action = ACTION_FAIL;
838 error = -EILSEQ;
Alan Sternb60af5b2008-11-03 15:56:47 -0500839 } else
840 action = ACTION_FAIL;
841 break;
Martin K. Petersen511e44f2008-07-17 04:28:33 -0400842 case ABORTED_COMMAND:
James Bottomley126c0982009-02-19 21:48:54 +0000843 action = ACTION_FAIL;
Martin K. Petersen511e44f2008-07-17 04:28:33 -0400844 if (sshdr.asc == 0x10) { /* DIF */
Martin K. Petersen3e695f82009-01-04 03:04:31 -0500845 description = "Target Data Integrity Failure";
Martin K. Petersen3e695f82009-01-04 03:04:31 -0500846 error = -EILSEQ;
James Bottomley126c0982009-02-19 21:48:54 +0000847 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700848 break;
849 case NOT_READY:
Luben Tuikov03aba2f2006-06-23 09:39:09 -0700850 /* If the device is in the process of becoming
James Bottomleyf3e93f72006-04-25 16:48:30 -0500851 * ready, or has a temporary blockage, retry.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700852 */
James Bottomleyf3e93f72006-04-25 16:48:30 -0500853 if (sshdr.asc == 0x04) {
854 switch (sshdr.ascq) {
855 case 0x01: /* becoming ready */
856 case 0x04: /* format in progress */
857 case 0x05: /* rebuild in progress */
858 case 0x06: /* recalculation in progress */
859 case 0x07: /* operation in progress */
860 case 0x08: /* Long write in progress */
861 case 0x09: /* self test in progress */
Alan Sternb60af5b2008-11-03 15:56:47 -0500862 action = ACTION_DELAYED_RETRY;
James Bottomleyf3e93f72006-04-25 16:48:30 -0500863 break;
Alan Stern3dbf6a52008-12-15 10:31:28 -0500864 default:
865 description = "Device not ready";
866 action = ACTION_FAIL;
867 break;
James Bottomleyf3e93f72006-04-25 16:48:30 -0500868 }
Alan Sternb60af5b2008-11-03 15:56:47 -0500869 } else {
870 description = "Device not ready";
871 action = ACTION_FAIL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700872 }
Alan Sternb60af5b2008-11-03 15:56:47 -0500873 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700874 case VOLUME_OVERFLOW:
Luben Tuikov03aba2f2006-06-23 09:39:09 -0700875 /* See SSC3rXX or current. */
Alan Sternb60af5b2008-11-03 15:56:47 -0500876 action = ACTION_FAIL;
877 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700878 default:
Alan Sternb60af5b2008-11-03 15:56:47 -0500879 description = "Unhandled sense code";
880 action = ACTION_FAIL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700881 break;
882 }
Alan Sternb60af5b2008-11-03 15:56:47 -0500883 } else {
884 description = "Unhandled error code";
885 action = ACTION_FAIL;
Luben Tuikov03aba2f2006-06-23 09:39:09 -0700886 }
Alan Sternb60af5b2008-11-03 15:56:47 -0500887
888 switch (action) {
889 case ACTION_FAIL:
890 /* Give up and fail the remainder of the request */
James Bottomley79ed2422009-01-06 13:15:20 -0600891 scsi_release_buffers(cmd);
Jens Axboe4aff5e22006-08-10 08:44:47 +0200892 if (!(req->cmd_flags & REQ_QUIET)) {
Alan Sternb60af5b2008-11-03 15:56:47 -0500893 if (description)
Alan Stern3dbf6a52008-12-15 10:31:28 -0500894 scmd_printk(KERN_INFO, cmd, "%s\n",
Alan Sternb60af5b2008-11-03 15:56:47 -0500895 description);
Martin K. Petersena4d04a42007-02-27 22:40:27 -0500896 scsi_print_result(cmd);
James Bottomley3173d8c2005-09-04 11:32:05 -0500897 if (driver_byte(result) & DRIVER_SENSE)
898 scsi_print_sense("", cmd);
Martin K. Petersen002b1eb2009-05-23 11:45:07 -0400899 scsi_print_command(cmd);
James Bottomley3173d8c2005-09-04 11:32:05 -0500900 }
Tejun Heoda6c5c72009-09-11 14:26:40 +0200901 if (blk_end_request_err(req, -EIO))
902 scsi_requeue_command(q, cmd);
903 else
904 scsi_next_command(cmd);
Alan Sternb60af5b2008-11-03 15:56:47 -0500905 break;
906 case ACTION_REPREP:
907 /* Unprep the request and put it back at the head of the queue.
908 * A new command will be prepared and issued.
909 */
James Bottomley79ed2422009-01-06 13:15:20 -0600910 scsi_release_buffers(cmd);
Alan Sternb60af5b2008-11-03 15:56:47 -0500911 scsi_requeue_command(q, cmd);
912 break;
913 case ACTION_RETRY:
914 /* Retry the same command immediately */
James Bottomley4f5299a2009-01-02 10:42:21 -0600915 __scsi_queue_insert(cmd, SCSI_MLQUEUE_EH_RETRY, 0);
Alan Sternb60af5b2008-11-03 15:56:47 -0500916 break;
917 case ACTION_DELAYED_RETRY:
918 /* Retry the same command after a delay */
James Bottomley4f5299a2009-01-02 10:42:21 -0600919 __scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY, 0);
Alan Sternb60af5b2008-11-03 15:56:47 -0500920 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700921 }
922}
Linus Torvalds1da177e2005-04-16 15:20:36 -0700923
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +0200924static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb,
925 gfp_t gfp_mask)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700926{
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +0200927 int count;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700928
929 /*
Christoph Hellwig3b003152006-11-04 20:10:55 +0100930 * If sg table allocation fails, requeue request later.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700931 */
Boaz Harrosh30b0c372007-12-13 13:47:40 +0200932 if (unlikely(scsi_alloc_sgtable(sdb, req->nr_phys_segments,
933 gfp_mask))) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700934 return BLKPREP_DEFER;
Alan Stern7c72ce82005-10-14 11:23:27 -0400935 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700936
Christoph Hellwig3b003152006-11-04 20:10:55 +0100937 req->buffer = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700938
939 /*
940 * Next, walk the list, and fill in the addresses and sizes of
941 * each segment.
942 */
Boaz Harrosh30b0c372007-12-13 13:47:40 +0200943 count = blk_rq_map_sg(req->q, req, sdb->table.sgl);
944 BUG_ON(count > sdb->table.nents);
945 sdb->table.nents = count;
Tejun Heo1011c1b2009-05-07 22:24:45 +0900946 sdb->length = blk_rq_bytes(req);
Rusty Russell4a03d902007-11-19 11:28:48 +1100947 return BLKPREP_OK;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700948}
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +0200949
950/*
951 * Function: scsi_init_io()
952 *
953 * Purpose: SCSI I/O initialize function.
954 *
955 * Arguments: cmd - Command descriptor we wish to initialize
956 *
957 * Returns: 0 on success
958 * BLKPREP_DEFER if the failure is retryable
959 * BLKPREP_KILL if the failure is fatal
960 */
961int scsi_init_io(struct scsi_cmnd *cmd, gfp_t gfp_mask)
962{
963 int error = scsi_init_sgtable(cmd->request, &cmd->sdb, gfp_mask);
964 if (error)
965 goto err_exit;
966
967 if (blk_bidi_rq(cmd->request)) {
968 struct scsi_data_buffer *bidi_sdb = kmem_cache_zalloc(
Martin K. Petersen6362abd2008-06-05 23:30:03 -0400969 scsi_sdb_cache, GFP_ATOMIC);
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +0200970 if (!bidi_sdb) {
971 error = BLKPREP_DEFER;
972 goto err_exit;
973 }
974
975 cmd->request->next_rq->special = bidi_sdb;
976 error = scsi_init_sgtable(cmd->request->next_rq, bidi_sdb,
977 GFP_ATOMIC);
978 if (error)
979 goto err_exit;
980 }
981
Martin K. Petersen7027ad72008-07-17 17:08:48 -0400982 if (blk_integrity_rq(cmd->request)) {
983 struct scsi_data_buffer *prot_sdb = cmd->prot_sdb;
984 int ivecs, count;
985
986 BUG_ON(prot_sdb == NULL);
987 ivecs = blk_rq_count_integrity_sg(cmd->request);
988
989 if (scsi_alloc_sgtable(prot_sdb, ivecs, gfp_mask)) {
990 error = BLKPREP_DEFER;
991 goto err_exit;
992 }
993
994 count = blk_rq_map_integrity_sg(cmd->request,
995 prot_sdb->table.sgl);
996 BUG_ON(unlikely(count > ivecs));
997
998 cmd->prot_sdb = prot_sdb;
999 cmd->prot_sdb->table.nents = count;
1000 }
1001
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +02001002 return BLKPREP_OK ;
1003
1004err_exit:
1005 scsi_release_buffers(cmd);
1006 if (error == BLKPREP_KILL)
1007 scsi_put_command(cmd);
1008 else /* BLKPREP_DEFER */
1009 scsi_unprep_request(cmd->request);
1010
1011 return error;
1012}
Boaz Harroshbb52d822007-12-13 16:14:27 -08001013EXPORT_SYMBOL(scsi_init_io);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001014
Christoph Hellwig3b003152006-11-04 20:10:55 +01001015static struct scsi_cmnd *scsi_get_cmd_from_req(struct scsi_device *sdev,
1016 struct request *req)
1017{
1018 struct scsi_cmnd *cmd;
1019
1020 if (!req->special) {
1021 cmd = scsi_get_command(sdev, GFP_ATOMIC);
1022 if (unlikely(!cmd))
1023 return NULL;
1024 req->special = cmd;
1025 } else {
1026 cmd = req->special;
1027 }
1028
1029 /* pull a tag out of the request if we have one */
1030 cmd->tag = req->tag;
1031 cmd->request = req;
1032
Boaz Harrosh64a87b22008-04-30 11:19:47 +03001033 cmd->cmnd = req->cmd;
1034
Christoph Hellwig3b003152006-11-04 20:10:55 +01001035 return cmd;
1036}
1037
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001038int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req)
James Bottomley7b163182005-12-15 20:17:02 -06001039{
Christoph Hellwig3b003152006-11-04 20:10:55 +01001040 struct scsi_cmnd *cmd;
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001041 int ret = scsi_prep_state_check(sdev, req);
1042
1043 if (ret != BLKPREP_OK)
1044 return ret;
Christoph Hellwig3b003152006-11-04 20:10:55 +01001045
1046 cmd = scsi_get_cmd_from_req(sdev, req);
1047 if (unlikely(!cmd))
1048 return BLKPREP_DEFER;
1049
1050 /*
1051 * BLOCK_PC requests may transfer data, in which case they must
1052 * a bio attached to them. Or they might contain a SCSI command
1053 * that does not transfer data, in which case they may optionally
1054 * submit a request without an attached bio.
1055 */
1056 if (req->bio) {
1057 int ret;
1058
1059 BUG_ON(!req->nr_phys_segments);
1060
Boaz Harroshbb52d822007-12-13 16:14:27 -08001061 ret = scsi_init_io(cmd, GFP_ATOMIC);
Christoph Hellwig3b003152006-11-04 20:10:55 +01001062 if (unlikely(ret))
1063 return ret;
1064 } else {
Tejun Heob0790412009-05-07 22:24:42 +09001065 BUG_ON(blk_rq_bytes(req));
Christoph Hellwig3b003152006-11-04 20:10:55 +01001066
Boaz Harrosh30b0c372007-12-13 13:47:40 +02001067 memset(&cmd->sdb, 0, sizeof(cmd->sdb));
Christoph Hellwig3b003152006-11-04 20:10:55 +01001068 req->buffer = NULL;
1069 }
James Bottomley7b163182005-12-15 20:17:02 -06001070
James Bottomley7b163182005-12-15 20:17:02 -06001071 cmd->cmd_len = req->cmd_len;
Tejun Heob0790412009-05-07 22:24:42 +09001072 if (!blk_rq_bytes(req))
James Bottomley7b163182005-12-15 20:17:02 -06001073 cmd->sc_data_direction = DMA_NONE;
1074 else if (rq_data_dir(req) == WRITE)
1075 cmd->sc_data_direction = DMA_TO_DEVICE;
1076 else
1077 cmd->sc_data_direction = DMA_FROM_DEVICE;
1078
Tejun Heob0790412009-05-07 22:24:42 +09001079 cmd->transfersize = blk_rq_bytes(req);
James Bottomley7b163182005-12-15 20:17:02 -06001080 cmd->allowed = req->retries;
Christoph Hellwig3b003152006-11-04 20:10:55 +01001081 return BLKPREP_OK;
1082}
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001083EXPORT_SYMBOL(scsi_setup_blk_pc_cmnd);
Christoph Hellwig3b003152006-11-04 20:10:55 +01001084
1085/*
1086 * Setup a REQ_TYPE_FS command. These are simple read/write request
1087 * from filesystems that still need to be translated to SCSI CDBs from
1088 * the ULD.
1089 */
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001090int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req)
Christoph Hellwig3b003152006-11-04 20:10:55 +01001091{
1092 struct scsi_cmnd *cmd;
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001093 int ret = scsi_prep_state_check(sdev, req);
Christoph Hellwig3b003152006-11-04 20:10:55 +01001094
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001095 if (ret != BLKPREP_OK)
1096 return ret;
Chandra Seetharamana6a8d9f2008-05-01 14:49:46 -07001097
1098 if (unlikely(sdev->scsi_dh_data && sdev->scsi_dh_data->scsi_dh
1099 && sdev->scsi_dh_data->scsi_dh->prep_fn)) {
1100 ret = sdev->scsi_dh_data->scsi_dh->prep_fn(sdev, req);
1101 if (ret != BLKPREP_OK)
1102 return ret;
1103 }
1104
Christoph Hellwig3b003152006-11-04 20:10:55 +01001105 /*
1106 * Filesystem requests must transfer data.
1107 */
1108 BUG_ON(!req->nr_phys_segments);
1109
1110 cmd = scsi_get_cmd_from_req(sdev, req);
1111 if (unlikely(!cmd))
1112 return BLKPREP_DEFER;
1113
Boaz Harrosh64a87b22008-04-30 11:19:47 +03001114 memset(cmd->cmnd, 0, BLK_MAX_CDB);
Boaz Harroshbb52d822007-12-13 16:14:27 -08001115 return scsi_init_io(cmd, GFP_ATOMIC);
James Bottomley7b163182005-12-15 20:17:02 -06001116}
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001117EXPORT_SYMBOL(scsi_setup_fs_cmnd);
James Bottomley7b163182005-12-15 20:17:02 -06001118
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001119int scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001120{
Christoph Hellwig3b003152006-11-04 20:10:55 +01001121 int ret = BLKPREP_OK;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001122
1123 /*
Christoph Hellwig3b003152006-11-04 20:10:55 +01001124 * If the device is not in running state we will reject some
1125 * or all commands.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001126 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001127 if (unlikely(sdev->sdev_state != SDEV_RUNNING)) {
Christoph Hellwig3b003152006-11-04 20:10:55 +01001128 switch (sdev->sdev_state) {
1129 case SDEV_OFFLINE:
1130 /*
1131 * If the device is offline we refuse to process any
1132 * commands. The device must be brought online
1133 * before trying any recovery commands.
1134 */
1135 sdev_printk(KERN_ERR, sdev,
1136 "rejecting I/O to offline device\n");
1137 ret = BLKPREP_KILL;
1138 break;
1139 case SDEV_DEL:
1140 /*
1141 * If the device is fully deleted, we refuse to
1142 * process any commands as well.
1143 */
James Bottomley9ccfc752005-10-02 11:45:08 -05001144 sdev_printk(KERN_ERR, sdev,
1145 "rejecting I/O to dead device\n");
Christoph Hellwig3b003152006-11-04 20:10:55 +01001146 ret = BLKPREP_KILL;
1147 break;
1148 case SDEV_QUIESCE:
1149 case SDEV_BLOCK:
James Bottomley6f4267e2008-08-22 16:53:31 -05001150 case SDEV_CREATED_BLOCK:
Christoph Hellwig3b003152006-11-04 20:10:55 +01001151 /*
1152 * If the devices is blocked we defer normal commands.
1153 */
1154 if (!(req->cmd_flags & REQ_PREEMPT))
1155 ret = BLKPREP_DEFER;
1156 break;
1157 default:
1158 /*
1159 * For any other not fully online state we only allow
1160 * special commands. In particular any user initiated
1161 * command is not allowed.
1162 */
1163 if (!(req->cmd_flags & REQ_PREEMPT))
1164 ret = BLKPREP_KILL;
1165 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001166 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001167 }
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001168 return ret;
1169}
1170EXPORT_SYMBOL(scsi_prep_state_check);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001171
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001172int scsi_prep_return(struct request_queue *q, struct request *req, int ret)
1173{
1174 struct scsi_device *sdev = q->queuedata;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001175
Christoph Hellwig3b003152006-11-04 20:10:55 +01001176 switch (ret) {
1177 case BLKPREP_KILL:
1178 req->errors = DID_NO_CONNECT << 16;
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001179 /* release the command and kill it */
1180 if (req->special) {
1181 struct scsi_cmnd *cmd = req->special;
1182 scsi_release_buffers(cmd);
1183 scsi_put_command(cmd);
1184 req->special = NULL;
1185 }
Christoph Hellwig3b003152006-11-04 20:10:55 +01001186 break;
1187 case BLKPREP_DEFER:
1188 /*
Tejun Heo9934c8c2009-05-08 11:54:16 +09001189 * If we defer, the blk_peek_request() returns NULL, but the
Christoph Hellwig3b003152006-11-04 20:10:55 +01001190 * queue must be restarted, so we plug here if no returning
1191 * command will automatically do that.
1192 */
1193 if (sdev->device_busy == 0)
1194 blk_plug_device(q);
1195 break;
1196 default:
1197 req->cmd_flags |= REQ_DONTPREP;
1198 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001199
Christoph Hellwig3b003152006-11-04 20:10:55 +01001200 return ret;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001201}
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001202EXPORT_SYMBOL(scsi_prep_return);
1203
James Bottomley751bf4d2008-01-02 11:14:30 -06001204int scsi_prep_fn(struct request_queue *q, struct request *req)
James Bottomley7f9a6bc2007-08-04 10:06:25 -05001205{
1206 struct scsi_device *sdev = q->queuedata;
1207 int ret = BLKPREP_KILL;
1208
1209 if (req->cmd_type == REQ_TYPE_BLOCK_PC)
1210 ret = scsi_setup_blk_pc_cmnd(sdev, req);
1211 return scsi_prep_return(q, req, ret);
1212}
Hannes Reineckeb3912772009-06-18 09:57:18 +02001213EXPORT_SYMBOL(scsi_prep_fn);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001214
1215/*
1216 * scsi_dev_queue_ready: if we can send requests to sdev, return 1 else
1217 * return 0.
1218 *
1219 * Called with the queue_lock held.
1220 */
1221static inline int scsi_dev_queue_ready(struct request_queue *q,
1222 struct scsi_device *sdev)
1223{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001224 if (sdev->device_busy == 0 && sdev->device_blocked) {
1225 /*
1226 * unblock after device_blocked iterates to zero
1227 */
1228 if (--sdev->device_blocked == 0) {
1229 SCSI_LOG_MLQUEUE(3,
James Bottomley9ccfc752005-10-02 11:45:08 -05001230 sdev_printk(KERN_INFO, sdev,
1231 "unblocking device at zero depth\n"));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001232 } else {
1233 blk_plug_device(q);
1234 return 0;
1235 }
1236 }
Kiyoshi Ueda9d112512008-10-04 14:11:06 -04001237 if (scsi_device_is_busy(sdev))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001238 return 0;
1239
1240 return 1;
1241}
1242
Mike Christief0c0a372008-08-17 15:24:38 -05001243
1244/*
1245 * scsi_target_queue_ready: checks if there we can send commands to target
1246 * @sdev: scsi device on starget to check.
1247 *
1248 * Called with the host lock held.
1249 */
1250static inline int scsi_target_queue_ready(struct Scsi_Host *shost,
1251 struct scsi_device *sdev)
1252{
1253 struct scsi_target *starget = scsi_target(sdev);
1254
1255 if (starget->single_lun) {
1256 if (starget->starget_sdev_user &&
1257 starget->starget_sdev_user != sdev)
1258 return 0;
1259 starget->starget_sdev_user = sdev;
1260 }
1261
1262 if (starget->target_busy == 0 && starget->target_blocked) {
1263 /*
1264 * unblock after target_blocked iterates to zero
1265 */
1266 if (--starget->target_blocked == 0) {
1267 SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget,
1268 "unblocking target at zero depth\n"));
Mike Christieb4efdd52009-04-09 15:57:10 -05001269 } else
Mike Christief0c0a372008-08-17 15:24:38 -05001270 return 0;
Mike Christief0c0a372008-08-17 15:24:38 -05001271 }
1272
1273 if (scsi_target_is_busy(starget)) {
1274 if (list_empty(&sdev->starved_entry)) {
1275 list_add_tail(&sdev->starved_entry,
1276 &shost->starved_list);
1277 return 0;
1278 }
1279 }
1280
1281 /* We're OK to process the command, so we can't be starved */
1282 if (!list_empty(&sdev->starved_entry))
1283 list_del_init(&sdev->starved_entry);
1284 return 1;
1285}
1286
Linus Torvalds1da177e2005-04-16 15:20:36 -07001287/*
1288 * scsi_host_queue_ready: if we can send requests to shost, return 1 else
1289 * return 0. We must end up running the queue again whenever 0 is
1290 * returned, else IO can hang.
1291 *
1292 * Called with host_lock held.
1293 */
1294static inline int scsi_host_queue_ready(struct request_queue *q,
1295 struct Scsi_Host *shost,
1296 struct scsi_device *sdev)
1297{
James Bottomley939647e2005-09-18 15:05:20 -05001298 if (scsi_host_in_recovery(shost))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001299 return 0;
1300 if (shost->host_busy == 0 && shost->host_blocked) {
1301 /*
1302 * unblock after host_blocked iterates to zero
1303 */
1304 if (--shost->host_blocked == 0) {
1305 SCSI_LOG_MLQUEUE(3,
1306 printk("scsi%d unblocking host at zero depth\n",
1307 shost->host_no));
1308 } else {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001309 return 0;
1310 }
1311 }
Kiyoshi Ueda9d112512008-10-04 14:11:06 -04001312 if (scsi_host_is_busy(shost)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001313 if (list_empty(&sdev->starved_entry))
1314 list_add_tail(&sdev->starved_entry, &shost->starved_list);
1315 return 0;
1316 }
1317
1318 /* We're OK to process the command, so we can't be starved */
1319 if (!list_empty(&sdev->starved_entry))
1320 list_del_init(&sdev->starved_entry);
1321
1322 return 1;
1323}
1324
1325/*
Kiyoshi Ueda6c5121b2008-10-04 14:11:35 -04001326 * Busy state exporting function for request stacking drivers.
1327 *
1328 * For efficiency, no lock is taken to check the busy state of
1329 * shost/starget/sdev, since the returned value is not guaranteed and
1330 * may be changed after request stacking drivers call the function,
1331 * regardless of taking lock or not.
1332 *
1333 * When scsi can't dispatch I/Os anymore and needs to kill I/Os
1334 * (e.g. !sdev), scsi needs to return 'not busy'.
1335 * Otherwise, request stacking drivers may hold requests forever.
1336 */
1337static int scsi_lld_busy(struct request_queue *q)
1338{
1339 struct scsi_device *sdev = q->queuedata;
1340 struct Scsi_Host *shost;
1341 struct scsi_target *starget;
1342
1343 if (!sdev)
1344 return 0;
1345
1346 shost = sdev->host;
1347 starget = scsi_target(sdev);
1348
1349 if (scsi_host_in_recovery(shost) || scsi_host_is_busy(shost) ||
1350 scsi_target_is_busy(starget) || scsi_device_is_busy(sdev))
1351 return 1;
1352
1353 return 0;
1354}
1355
1356/*
James Bottomleye91442b2005-09-09 10:44:16 -05001357 * Kill a request for a dead device
Linus Torvalds1da177e2005-04-16 15:20:36 -07001358 */
Jens Axboe165125e2007-07-24 09:28:11 +02001359static void scsi_kill_request(struct request *req, struct request_queue *q)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001360{
James Bottomleye91442b2005-09-09 10:44:16 -05001361 struct scsi_cmnd *cmd = req->special;
Tejun Heoe36e0c82006-04-11 17:27:53 +09001362 struct scsi_device *sdev = cmd->device;
Mike Christief0c0a372008-08-17 15:24:38 -05001363 struct scsi_target *starget = scsi_target(sdev);
Tejun Heoe36e0c82006-04-11 17:27:53 +09001364 struct Scsi_Host *shost = sdev->host;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001365
Tejun Heo9934c8c2009-05-08 11:54:16 +09001366 blk_start_request(req);
James Bottomley788ce432005-09-09 13:40:23 -05001367
James Bottomleye91442b2005-09-09 10:44:16 -05001368 if (unlikely(cmd == NULL)) {
1369 printk(KERN_CRIT "impossible request in %s.\n",
Harvey Harrisoncadbd4a2008-07-03 23:47:27 -07001370 __func__);
James Bottomleye91442b2005-09-09 10:44:16 -05001371 BUG();
Linus Torvalds1da177e2005-04-16 15:20:36 -07001372 }
James Bottomleye91442b2005-09-09 10:44:16 -05001373
1374 scsi_init_cmd_errh(cmd);
1375 cmd->result = DID_NO_CONNECT << 16;
1376 atomic_inc(&cmd->device->iorequest_cnt);
Tejun Heoe36e0c82006-04-11 17:27:53 +09001377
1378 /*
1379 * SCSI request completion path will do scsi_device_unbusy(),
1380 * bump busy counts. To bump the counters, we need to dance
1381 * with the locks as normal issue path does.
1382 */
1383 sdev->device_busy++;
1384 spin_unlock(sdev->request_queue->queue_lock);
1385 spin_lock(shost->host_lock);
1386 shost->host_busy++;
Mike Christief0c0a372008-08-17 15:24:38 -05001387 starget->target_busy++;
Tejun Heoe36e0c82006-04-11 17:27:53 +09001388 spin_unlock(shost->host_lock);
1389 spin_lock(sdev->request_queue->queue_lock);
1390
Jens Axboe242f9dc2008-09-14 05:55:09 -07001391 blk_complete_request(req);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001392}
1393
Jens Axboe1aea6432006-01-09 16:03:03 +01001394static void scsi_softirq_done(struct request *rq)
1395{
Jens Axboe242f9dc2008-09-14 05:55:09 -07001396 struct scsi_cmnd *cmd = rq->special;
1397 unsigned long wait_for = (cmd->allowed + 1) * rq->timeout;
Jens Axboe1aea6432006-01-09 16:03:03 +01001398 int disposition;
1399
1400 INIT_LIST_HEAD(&cmd->eh_entry);
1401
Jens Axboe242f9dc2008-09-14 05:55:09 -07001402 /*
1403 * Set the serial numbers back to zero
1404 */
1405 cmd->serial_number = 0;
1406
1407 atomic_inc(&cmd->device->iodone_cnt);
1408 if (cmd->result)
1409 atomic_inc(&cmd->device->ioerr_cnt);
1410
Jens Axboe1aea6432006-01-09 16:03:03 +01001411 disposition = scsi_decide_disposition(cmd);
1412 if (disposition != SUCCESS &&
1413 time_before(cmd->jiffies_at_alloc + wait_for, jiffies)) {
1414 sdev_printk(KERN_ERR, cmd->device,
1415 "timing out command, waited %lus\n",
1416 wait_for/HZ);
1417 disposition = SUCCESS;
1418 }
1419
1420 scsi_log_completion(cmd, disposition);
1421
1422 switch (disposition) {
1423 case SUCCESS:
1424 scsi_finish_command(cmd);
1425 break;
1426 case NEEDS_RETRY:
Christoph Hellwig596f4822007-01-02 12:56:00 +01001427 scsi_queue_insert(cmd, SCSI_MLQUEUE_EH_RETRY);
Jens Axboe1aea6432006-01-09 16:03:03 +01001428 break;
1429 case ADD_TO_MLQUEUE:
1430 scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY);
1431 break;
1432 default:
1433 if (!scsi_eh_scmd_add(cmd, 0))
1434 scsi_finish_command(cmd);
1435 }
1436}
1437
Linus Torvalds1da177e2005-04-16 15:20:36 -07001438/*
1439 * Function: scsi_request_fn()
1440 *
1441 * Purpose: Main strategy routine for SCSI.
1442 *
1443 * Arguments: q - Pointer to actual queue.
1444 *
1445 * Returns: Nothing
1446 *
1447 * Lock status: IO request lock assumed to be held when called.
1448 */
1449static void scsi_request_fn(struct request_queue *q)
1450{
1451 struct scsi_device *sdev = q->queuedata;
1452 struct Scsi_Host *shost;
1453 struct scsi_cmnd *cmd;
1454 struct request *req;
1455
1456 if (!sdev) {
1457 printk("scsi: killing requests for dead queue\n");
Tejun Heo9934c8c2009-05-08 11:54:16 +09001458 while ((req = blk_peek_request(q)) != NULL)
James Bottomleye91442b2005-09-09 10:44:16 -05001459 scsi_kill_request(req, q);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001460 return;
1461 }
1462
1463 if(!get_device(&sdev->sdev_gendev))
1464 /* We must be tearing the block queue down already */
1465 return;
1466
1467 /*
1468 * To start with, we keep looping until the queue is empty, or until
1469 * the host is no longer able to accept any more requests.
1470 */
1471 shost = sdev->host;
1472 while (!blk_queue_plugged(q)) {
1473 int rtn;
1474 /*
1475 * get next queueable request. We do this early to make sure
1476 * that the request is fully prepared even if we cannot
1477 * accept it.
1478 */
Tejun Heo9934c8c2009-05-08 11:54:16 +09001479 req = blk_peek_request(q);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001480 if (!req || !scsi_dev_queue_ready(q, sdev))
1481 break;
1482
1483 if (unlikely(!scsi_device_online(sdev))) {
James Bottomley9ccfc752005-10-02 11:45:08 -05001484 sdev_printk(KERN_ERR, sdev,
1485 "rejecting I/O to offline device\n");
James Bottomleye91442b2005-09-09 10:44:16 -05001486 scsi_kill_request(req, q);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001487 continue;
1488 }
1489
1490
1491 /*
1492 * Remove the request from the request list.
1493 */
1494 if (!(blk_queue_tagged(q) && !blk_queue_start_tag(q, req)))
Tejun Heo9934c8c2009-05-08 11:54:16 +09001495 blk_start_request(req);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001496 sdev->device_busy++;
1497
1498 spin_unlock(q->queue_lock);
James Bottomleye91442b2005-09-09 10:44:16 -05001499 cmd = req->special;
1500 if (unlikely(cmd == NULL)) {
1501 printk(KERN_CRIT "impossible request in %s.\n"
1502 "please mail a stack trace to "
Jens Axboe4aff5e22006-08-10 08:44:47 +02001503 "linux-scsi@vger.kernel.org\n",
Harvey Harrisoncadbd4a2008-07-03 23:47:27 -07001504 __func__);
Jens Axboe4aff5e22006-08-10 08:44:47 +02001505 blk_dump_rq_flags(req, "foo");
James Bottomleye91442b2005-09-09 10:44:16 -05001506 BUG();
1507 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001508 spin_lock(shost->host_lock);
1509
Mike Christieecefe8a2008-07-11 19:50:35 -05001510 /*
1511 * We hit this when the driver is using a host wide
1512 * tag map. For device level tag maps the queue_depth check
1513 * in the device ready fn would prevent us from trying
1514 * to allocate a tag. Since the map is a shared host resource
1515 * we add the dev to the starved list so it eventually gets
1516 * a run when a tag is freed.
1517 */
Mike Christie6bd522f2008-07-22 15:34:38 -05001518 if (blk_queue_tagged(q) && !blk_rq_tagged(req)) {
Mike Christieecefe8a2008-07-11 19:50:35 -05001519 if (list_empty(&sdev->starved_entry))
1520 list_add_tail(&sdev->starved_entry,
1521 &shost->starved_list);
1522 goto not_ready;
1523 }
1524
Mike Christief0c0a372008-08-17 15:24:38 -05001525 if (!scsi_target_queue_ready(shost, sdev))
1526 goto not_ready;
1527
Linus Torvalds1da177e2005-04-16 15:20:36 -07001528 if (!scsi_host_queue_ready(q, shost, sdev))
1529 goto not_ready;
Mike Christief0c0a372008-08-17 15:24:38 -05001530
1531 scsi_target(sdev)->target_busy++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001532 shost->host_busy++;
1533
1534 /*
1535 * XXX(hch): This is rather suboptimal, scsi_dispatch_cmd will
1536 * take the lock again.
1537 */
1538 spin_unlock_irq(shost->host_lock);
1539
Linus Torvalds1da177e2005-04-16 15:20:36 -07001540 /*
1541 * Finally, initialize any error handling parameters, and set up
1542 * the timers for timeouts.
1543 */
1544 scsi_init_cmd_errh(cmd);
1545
1546 /*
1547 * Dispatch the command to the low-level driver.
1548 */
1549 rtn = scsi_dispatch_cmd(cmd);
1550 spin_lock_irq(q->queue_lock);
1551 if(rtn) {
1552 /* we're refusing the command; because of
1553 * the way locks get dropped, we need to
1554 * check here if plugging is required */
1555 if(sdev->device_busy == 0)
1556 blk_plug_device(q);
1557
1558 break;
1559 }
1560 }
1561
1562 goto out;
1563
1564 not_ready:
1565 spin_unlock_irq(shost->host_lock);
1566
1567 /*
1568 * lock q, handle tag, requeue req, and decrement device_busy. We
1569 * must return with queue_lock held.
1570 *
1571 * Decrementing device_busy without checking it is OK, as all such
1572 * cases (host limits or settings) should run the queue at some
1573 * later time.
1574 */
1575 spin_lock_irq(q->queue_lock);
1576 blk_requeue_request(q, req);
1577 sdev->device_busy--;
1578 if(sdev->device_busy == 0)
1579 blk_plug_device(q);
1580 out:
1581 /* must be careful here...if we trigger the ->remove() function
1582 * we cannot be holding the q lock */
1583 spin_unlock_irq(q->queue_lock);
1584 put_device(&sdev->sdev_gendev);
1585 spin_lock_irq(q->queue_lock);
1586}
1587
1588u64 scsi_calculate_bounce_limit(struct Scsi_Host *shost)
1589{
1590 struct device *host_dev;
1591 u64 bounce_limit = 0xffffffff;
1592
1593 if (shost->unchecked_isa_dma)
1594 return BLK_BOUNCE_ISA;
1595 /*
1596 * Platforms with virtual-DMA translation
1597 * hardware have no practical limit.
1598 */
1599 if (!PCI_DMA_BUS_IS_PHYS)
1600 return BLK_BOUNCE_ANY;
1601
1602 host_dev = scsi_get_device(shost);
1603 if (host_dev && host_dev->dma_mask)
1604 bounce_limit = *host_dev->dma_mask;
1605
1606 return bounce_limit;
1607}
1608EXPORT_SYMBOL(scsi_calculate_bounce_limit);
1609
FUJITA Tomonorib58d9152006-11-16 19:24:10 +09001610struct request_queue *__scsi_alloc_queue(struct Scsi_Host *shost,
1611 request_fn_proc *request_fn)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001612{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001613 struct request_queue *q;
FUJITA Tomonori860ac562008-02-04 22:28:05 -08001614 struct device *dev = shost->shost_gendev.parent;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001615
FUJITA Tomonorib58d9152006-11-16 19:24:10 +09001616 q = blk_init_queue(request_fn, NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001617 if (!q)
1618 return NULL;
1619
Jens Axboea8474ce2007-08-07 09:02:51 +02001620 /*
1621 * this limit is imposed by hardware restrictions
1622 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001623 blk_queue_max_hw_segments(q, shost->sg_tablesize);
James Bottomleyd3f46f32008-01-15 11:11:46 -06001624 blk_queue_max_phys_segments(q, SCSI_MAX_SG_CHAIN_SEGMENTS);
Jens Axboea8474ce2007-08-07 09:02:51 +02001625
Linus Torvalds1da177e2005-04-16 15:20:36 -07001626 blk_queue_max_sectors(q, shost->max_sectors);
1627 blk_queue_bounce_limit(q, scsi_calculate_bounce_limit(shost));
1628 blk_queue_segment_boundary(q, shost->dma_boundary);
FUJITA Tomonori99c84db2008-02-04 22:28:17 -08001629 dma_set_seg_boundary(dev, shost->dma_boundary);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001630
FUJITA Tomonori860ac562008-02-04 22:28:05 -08001631 blk_queue_max_segment_size(q, dma_get_max_seg_size(dev));
1632
Nick Piggin75ad23b2008-04-29 14:48:33 +02001633 /* New queue, no concurrency on queue_flags */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001634 if (!shost->use_clustering)
Nick Piggin75ad23b2008-04-29 14:48:33 +02001635 queue_flag_clear_unlocked(QUEUE_FLAG_CLUSTER, q);
James Bottomley465ff312008-01-01 10:00:10 -06001636
1637 /*
1638 * set a reasonable default alignment on word boundaries: the
1639 * host and device may alter it using
1640 * blk_queue_update_dma_alignment() later.
1641 */
1642 blk_queue_dma_alignment(q, 0x03);
1643
Linus Torvalds1da177e2005-04-16 15:20:36 -07001644 return q;
1645}
FUJITA Tomonorib58d9152006-11-16 19:24:10 +09001646EXPORT_SYMBOL(__scsi_alloc_queue);
1647
1648struct request_queue *scsi_alloc_queue(struct scsi_device *sdev)
1649{
1650 struct request_queue *q;
1651
1652 q = __scsi_alloc_queue(sdev->host, scsi_request_fn);
1653 if (!q)
1654 return NULL;
1655
1656 blk_queue_prep_rq(q, scsi_prep_fn);
FUJITA Tomonorib58d9152006-11-16 19:24:10 +09001657 blk_queue_softirq_done(q, scsi_softirq_done);
Jens Axboe242f9dc2008-09-14 05:55:09 -07001658 blk_queue_rq_timed_out(q, scsi_times_out);
Kiyoshi Ueda6c5121b2008-10-04 14:11:35 -04001659 blk_queue_lld_busy(q, scsi_lld_busy);
FUJITA Tomonorib58d9152006-11-16 19:24:10 +09001660 return q;
1661}
Linus Torvalds1da177e2005-04-16 15:20:36 -07001662
1663void scsi_free_queue(struct request_queue *q)
1664{
1665 blk_cleanup_queue(q);
1666}
1667
1668/*
1669 * Function: scsi_block_requests()
1670 *
1671 * Purpose: Utility function used by low-level drivers to prevent further
1672 * commands from being queued to the device.
1673 *
1674 * Arguments: shost - Host in question
1675 *
1676 * Returns: Nothing
1677 *
1678 * Lock status: No locks are assumed held.
1679 *
1680 * Notes: There is no timer nor any other means by which the requests
1681 * get unblocked other than the low-level driver calling
1682 * scsi_unblock_requests().
1683 */
1684void scsi_block_requests(struct Scsi_Host *shost)
1685{
1686 shost->host_self_blocked = 1;
1687}
1688EXPORT_SYMBOL(scsi_block_requests);
1689
1690/*
1691 * Function: scsi_unblock_requests()
1692 *
1693 * Purpose: Utility function used by low-level drivers to allow further
1694 * commands from being queued to the device.
1695 *
1696 * Arguments: shost - Host in question
1697 *
1698 * Returns: Nothing
1699 *
1700 * Lock status: No locks are assumed held.
1701 *
1702 * Notes: There is no timer nor any other means by which the requests
1703 * get unblocked other than the low-level driver calling
1704 * scsi_unblock_requests().
1705 *
1706 * This is done as an API function so that changes to the
1707 * internals of the scsi mid-layer won't require wholesale
1708 * changes to drivers that use this feature.
1709 */
1710void scsi_unblock_requests(struct Scsi_Host *shost)
1711{
1712 shost->host_self_blocked = 0;
1713 scsi_run_host_queues(shost);
1714}
1715EXPORT_SYMBOL(scsi_unblock_requests);
1716
1717int __init scsi_init_queue(void)
1718{
1719 int i;
1720
Martin K. Petersen6362abd2008-06-05 23:30:03 -04001721 scsi_sdb_cache = kmem_cache_create("scsi_data_buffer",
1722 sizeof(struct scsi_data_buffer),
1723 0, 0, NULL);
1724 if (!scsi_sdb_cache) {
1725 printk(KERN_ERR "SCSI: can't init scsi sdb cache\n");
FUJITA Tomonorif0787272008-12-14 01:23:45 +09001726 return -ENOMEM;
Boaz Harrosh6f9a35e2007-12-13 13:50:53 +02001727 }
1728
Linus Torvalds1da177e2005-04-16 15:20:36 -07001729 for (i = 0; i < SG_MEMPOOL_NR; i++) {
1730 struct scsi_host_sg_pool *sgp = scsi_sg_pools + i;
1731 int size = sgp->size * sizeof(struct scatterlist);
1732
1733 sgp->slab = kmem_cache_create(sgp->name, size, 0,
Paul Mundt20c2df82007-07-20 10:11:58 +09001734 SLAB_HWCACHE_ALIGN, NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001735 if (!sgp->slab) {
1736 printk(KERN_ERR "SCSI: can't init sg slab %s\n",
1737 sgp->name);
Martin K. Petersen6362abd2008-06-05 23:30:03 -04001738 goto cleanup_sdb;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001739 }
1740
Matthew Dobson93d23412006-03-26 01:37:50 -08001741 sgp->pool = mempool_create_slab_pool(SG_MEMPOOL_SIZE,
1742 sgp->slab);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001743 if (!sgp->pool) {
1744 printk(KERN_ERR "SCSI: can't init sg mempool %s\n",
1745 sgp->name);
Martin K. Petersen6362abd2008-06-05 23:30:03 -04001746 goto cleanup_sdb;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001747 }
1748 }
1749
1750 return 0;
FUJITA Tomonori3d9dd6e2008-01-25 23:25:14 +09001751
Martin K. Petersen6362abd2008-06-05 23:30:03 -04001752cleanup_sdb:
FUJITA Tomonori3d9dd6e2008-01-25 23:25:14 +09001753 for (i = 0; i < SG_MEMPOOL_NR; i++) {
1754 struct scsi_host_sg_pool *sgp = scsi_sg_pools + i;
1755 if (sgp->pool)
1756 mempool_destroy(sgp->pool);
1757 if (sgp->slab)
1758 kmem_cache_destroy(sgp->slab);
1759 }
Martin K. Petersen6362abd2008-06-05 23:30:03 -04001760 kmem_cache_destroy(scsi_sdb_cache);
FUJITA Tomonori3d9dd6e2008-01-25 23:25:14 +09001761
1762 return -ENOMEM;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001763}
1764
1765void scsi_exit_queue(void)
1766{
1767 int i;
1768
Martin K. Petersen6362abd2008-06-05 23:30:03 -04001769 kmem_cache_destroy(scsi_sdb_cache);
Mike Christieaa7b5cd2005-11-11 05:31:41 -06001770
Linus Torvalds1da177e2005-04-16 15:20:36 -07001771 for (i = 0; i < SG_MEMPOOL_NR; i++) {
1772 struct scsi_host_sg_pool *sgp = scsi_sg_pools + i;
1773 mempool_destroy(sgp->pool);
1774 kmem_cache_destroy(sgp->slab);
1775 }
1776}
James Bottomley5baba832006-03-18 14:10:35 -06001777
1778/**
1779 * scsi_mode_select - issue a mode select
1780 * @sdev: SCSI device to be queried
1781 * @pf: Page format bit (1 == standard, 0 == vendor specific)
1782 * @sp: Save page bit (0 == don't save, 1 == save)
1783 * @modepage: mode page being requested
1784 * @buffer: request buffer (may not be smaller than eight bytes)
1785 * @len: length of request buffer.
1786 * @timeout: command timeout
1787 * @retries: number of retries before failing
1788 * @data: returns a structure abstracting the mode header data
Rob Landleyeb448202007-11-03 13:30:39 -05001789 * @sshdr: place to put sense data (or NULL if no sense to be collected).
James Bottomley5baba832006-03-18 14:10:35 -06001790 * must be SCSI_SENSE_BUFFERSIZE big.
1791 *
1792 * Returns zero if successful; negative error number or scsi
1793 * status on error
1794 *
1795 */
1796int
1797scsi_mode_select(struct scsi_device *sdev, int pf, int sp, int modepage,
1798 unsigned char *buffer, int len, int timeout, int retries,
1799 struct scsi_mode_data *data, struct scsi_sense_hdr *sshdr)
1800{
1801 unsigned char cmd[10];
1802 unsigned char *real_buffer;
1803 int ret;
1804
1805 memset(cmd, 0, sizeof(cmd));
1806 cmd[1] = (pf ? 0x10 : 0) | (sp ? 0x01 : 0);
1807
1808 if (sdev->use_10_for_ms) {
1809 if (len > 65535)
1810 return -EINVAL;
1811 real_buffer = kmalloc(8 + len, GFP_KERNEL);
1812 if (!real_buffer)
1813 return -ENOMEM;
1814 memcpy(real_buffer + 8, buffer, len);
1815 len += 8;
1816 real_buffer[0] = 0;
1817 real_buffer[1] = 0;
1818 real_buffer[2] = data->medium_type;
1819 real_buffer[3] = data->device_specific;
1820 real_buffer[4] = data->longlba ? 0x01 : 0;
1821 real_buffer[5] = 0;
1822 real_buffer[6] = data->block_descriptor_length >> 8;
1823 real_buffer[7] = data->block_descriptor_length;
1824
1825 cmd[0] = MODE_SELECT_10;
1826 cmd[7] = len >> 8;
1827 cmd[8] = len;
1828 } else {
1829 if (len > 255 || data->block_descriptor_length > 255 ||
1830 data->longlba)
1831 return -EINVAL;
1832
1833 real_buffer = kmalloc(4 + len, GFP_KERNEL);
1834 if (!real_buffer)
1835 return -ENOMEM;
1836 memcpy(real_buffer + 4, buffer, len);
1837 len += 4;
1838 real_buffer[0] = 0;
1839 real_buffer[1] = data->medium_type;
1840 real_buffer[2] = data->device_specific;
1841 real_buffer[3] = data->block_descriptor_length;
1842
1843
1844 cmd[0] = MODE_SELECT;
1845 cmd[4] = len;
1846 }
1847
1848 ret = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, real_buffer, len,
FUJITA Tomonorif4f4e472008-12-04 14:24:39 +09001849 sshdr, timeout, retries, NULL);
James Bottomley5baba832006-03-18 14:10:35 -06001850 kfree(real_buffer);
1851 return ret;
1852}
1853EXPORT_SYMBOL_GPL(scsi_mode_select);
1854
Linus Torvalds1da177e2005-04-16 15:20:36 -07001855/**
Rob Landleyeb448202007-11-03 13:30:39 -05001856 * scsi_mode_sense - issue a mode sense, falling back from 10 to six bytes if necessary.
James Bottomley1cf72692005-08-28 11:27:01 -05001857 * @sdev: SCSI device to be queried
Linus Torvalds1da177e2005-04-16 15:20:36 -07001858 * @dbd: set if mode sense will allow block descriptors to be returned
1859 * @modepage: mode page being requested
1860 * @buffer: request buffer (may not be smaller than eight bytes)
1861 * @len: length of request buffer.
1862 * @timeout: command timeout
1863 * @retries: number of retries before failing
1864 * @data: returns a structure abstracting the mode header data
Rob Landleyeb448202007-11-03 13:30:39 -05001865 * @sshdr: place to put sense data (or NULL if no sense to be collected).
James Bottomley1cf72692005-08-28 11:27:01 -05001866 * must be SCSI_SENSE_BUFFERSIZE big.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001867 *
1868 * Returns zero if unsuccessful, or the header offset (either 4
1869 * or 8 depending on whether a six or ten byte command was
1870 * issued) if successful.
Rob Landleyeb448202007-11-03 13:30:39 -05001871 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001872int
James Bottomley1cf72692005-08-28 11:27:01 -05001873scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001874 unsigned char *buffer, int len, int timeout, int retries,
James Bottomley5baba832006-03-18 14:10:35 -06001875 struct scsi_mode_data *data, struct scsi_sense_hdr *sshdr)
1876{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001877 unsigned char cmd[12];
1878 int use_10_for_ms;
1879 int header_length;
James Bottomley1cf72692005-08-28 11:27:01 -05001880 int result;
James Bottomleyea73a9f2005-08-28 11:33:52 -05001881 struct scsi_sense_hdr my_sshdr;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001882
1883 memset(data, 0, sizeof(*data));
1884 memset(&cmd[0], 0, 12);
1885 cmd[1] = dbd & 0x18; /* allows DBD and LLBA bits */
1886 cmd[2] = modepage;
1887
James Bottomleyea73a9f2005-08-28 11:33:52 -05001888 /* caller might not be interested in sense, but we need it */
1889 if (!sshdr)
1890 sshdr = &my_sshdr;
1891
Linus Torvalds1da177e2005-04-16 15:20:36 -07001892 retry:
James Bottomley1cf72692005-08-28 11:27:01 -05001893 use_10_for_ms = sdev->use_10_for_ms;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001894
1895 if (use_10_for_ms) {
1896 if (len < 8)
1897 len = 8;
1898
1899 cmd[0] = MODE_SENSE_10;
1900 cmd[8] = len;
1901 header_length = 8;
1902 } else {
1903 if (len < 4)
1904 len = 4;
1905
1906 cmd[0] = MODE_SENSE;
1907 cmd[4] = len;
1908 header_length = 4;
1909 }
1910
Linus Torvalds1da177e2005-04-16 15:20:36 -07001911 memset(buffer, 0, len);
1912
James Bottomley1cf72692005-08-28 11:27:01 -05001913 result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer, len,
FUJITA Tomonorif4f4e472008-12-04 14:24:39 +09001914 sshdr, timeout, retries, NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001915
1916 /* This code looks awful: what it's doing is making sure an
1917 * ILLEGAL REQUEST sense return identifies the actual command
1918 * byte as the problem. MODE_SENSE commands can return
1919 * ILLEGAL REQUEST if the code page isn't supported */
1920
James Bottomley1cf72692005-08-28 11:27:01 -05001921 if (use_10_for_ms && !scsi_status_is_good(result) &&
1922 (driver_byte(result) & DRIVER_SENSE)) {
James Bottomleyea73a9f2005-08-28 11:33:52 -05001923 if (scsi_sense_valid(sshdr)) {
1924 if ((sshdr->sense_key == ILLEGAL_REQUEST) &&
1925 (sshdr->asc == 0x20) && (sshdr->ascq == 0)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001926 /*
1927 * Invalid command operation code
1928 */
James Bottomley1cf72692005-08-28 11:27:01 -05001929 sdev->use_10_for_ms = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001930 goto retry;
1931 }
1932 }
1933 }
1934
James Bottomley1cf72692005-08-28 11:27:01 -05001935 if(scsi_status_is_good(result)) {
Al Viro6d73c852006-02-23 02:03:16 +01001936 if (unlikely(buffer[0] == 0x86 && buffer[1] == 0x0b &&
1937 (modepage == 6 || modepage == 8))) {
1938 /* Initio breakage? */
1939 header_length = 0;
1940 data->length = 13;
1941 data->medium_type = 0;
1942 data->device_specific = 0;
1943 data->longlba = 0;
1944 data->block_descriptor_length = 0;
1945 } else if(use_10_for_ms) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001946 data->length = buffer[0]*256 + buffer[1] + 2;
1947 data->medium_type = buffer[2];
1948 data->device_specific = buffer[3];
1949 data->longlba = buffer[4] & 0x01;
1950 data->block_descriptor_length = buffer[6]*256
1951 + buffer[7];
1952 } else {
1953 data->length = buffer[0] + 1;
1954 data->medium_type = buffer[1];
1955 data->device_specific = buffer[2];
1956 data->block_descriptor_length = buffer[3];
1957 }
Al Viro6d73c852006-02-23 02:03:16 +01001958 data->header_length = header_length;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001959 }
1960
James Bottomley1cf72692005-08-28 11:27:01 -05001961 return result;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001962}
1963EXPORT_SYMBOL(scsi_mode_sense);
1964
James Bottomley001aac22007-12-02 19:10:40 +02001965/**
1966 * scsi_test_unit_ready - test if unit is ready
1967 * @sdev: scsi device to change the state of.
1968 * @timeout: command timeout
1969 * @retries: number of retries before failing
1970 * @sshdr_external: Optional pointer to struct scsi_sense_hdr for
1971 * returning sense. Make sure that this is cleared before passing
1972 * in.
1973 *
1974 * Returns zero if unsuccessful or an error if TUR failed. For
1975 * removable media, a return of NOT_READY or UNIT_ATTENTION is
1976 * translated to success, with the ->changed flag updated.
1977 **/
Linus Torvalds1da177e2005-04-16 15:20:36 -07001978int
James Bottomley001aac22007-12-02 19:10:40 +02001979scsi_test_unit_ready(struct scsi_device *sdev, int timeout, int retries,
1980 struct scsi_sense_hdr *sshdr_external)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001981{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001982 char cmd[] = {
1983 TEST_UNIT_READY, 0, 0, 0, 0, 0,
1984 };
James Bottomley001aac22007-12-02 19:10:40 +02001985 struct scsi_sense_hdr *sshdr;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001986 int result;
James Bottomley001aac22007-12-02 19:10:40 +02001987
1988 if (!sshdr_external)
1989 sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL);
1990 else
1991 sshdr = sshdr_external;
1992
1993 /* try to eat the UNIT_ATTENTION if there are enough retries */
1994 do {
1995 result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0, sshdr,
FUJITA Tomonorif4f4e472008-12-04 14:24:39 +09001996 timeout, retries, NULL);
James Bottomley32c356d2008-08-20 00:58:13 +02001997 if (sdev->removable && scsi_sense_valid(sshdr) &&
1998 sshdr->sense_key == UNIT_ATTENTION)
1999 sdev->changed = 1;
2000 } while (scsi_sense_valid(sshdr) &&
2001 sshdr->sense_key == UNIT_ATTENTION && --retries);
James Bottomley001aac22007-12-02 19:10:40 +02002002
2003 if (!sshdr)
2004 /* could not allocate sense buffer, so can't process it */
2005 return result;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002006
James Bottomley32c356d2008-08-20 00:58:13 +02002007 if (sdev->removable && scsi_sense_valid(sshdr) &&
2008 (sshdr->sense_key == UNIT_ATTENTION ||
2009 sshdr->sense_key == NOT_READY)) {
2010 sdev->changed = 1;
2011 result = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002012 }
James Bottomley001aac22007-12-02 19:10:40 +02002013 if (!sshdr_external)
2014 kfree(sshdr);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002015 return result;
2016}
2017EXPORT_SYMBOL(scsi_test_unit_ready);
2018
2019/**
Rob Landleyeb448202007-11-03 13:30:39 -05002020 * scsi_device_set_state - Take the given device through the device state model.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002021 * @sdev: scsi device to change the state of.
2022 * @state: state to change to.
2023 *
2024 * Returns zero if unsuccessful or an error if the requested
2025 * transition is illegal.
Rob Landleyeb448202007-11-03 13:30:39 -05002026 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002027int
2028scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
2029{
2030 enum scsi_device_state oldstate = sdev->sdev_state;
2031
2032 if (state == oldstate)
2033 return 0;
2034
2035 switch (state) {
2036 case SDEV_CREATED:
James Bottomley6f4267e2008-08-22 16:53:31 -05002037 switch (oldstate) {
2038 case SDEV_CREATED_BLOCK:
2039 break;
2040 default:
2041 goto illegal;
2042 }
2043 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002044
2045 case SDEV_RUNNING:
2046 switch (oldstate) {
2047 case SDEV_CREATED:
2048 case SDEV_OFFLINE:
2049 case SDEV_QUIESCE:
2050 case SDEV_BLOCK:
2051 break;
2052 default:
2053 goto illegal;
2054 }
2055 break;
2056
2057 case SDEV_QUIESCE:
2058 switch (oldstate) {
2059 case SDEV_RUNNING:
2060 case SDEV_OFFLINE:
2061 break;
2062 default:
2063 goto illegal;
2064 }
2065 break;
2066
2067 case SDEV_OFFLINE:
2068 switch (oldstate) {
2069 case SDEV_CREATED:
2070 case SDEV_RUNNING:
2071 case SDEV_QUIESCE:
2072 case SDEV_BLOCK:
2073 break;
2074 default:
2075 goto illegal;
2076 }
2077 break;
2078
2079 case SDEV_BLOCK:
2080 switch (oldstate) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002081 case SDEV_RUNNING:
James Bottomley6f4267e2008-08-22 16:53:31 -05002082 case SDEV_CREATED_BLOCK:
2083 break;
2084 default:
2085 goto illegal;
2086 }
2087 break;
2088
2089 case SDEV_CREATED_BLOCK:
2090 switch (oldstate) {
2091 case SDEV_CREATED:
Linus Torvalds1da177e2005-04-16 15:20:36 -07002092 break;
2093 default:
2094 goto illegal;
2095 }
2096 break;
2097
2098 case SDEV_CANCEL:
2099 switch (oldstate) {
2100 case SDEV_CREATED:
2101 case SDEV_RUNNING:
Alan Stern9ea72902006-06-23 14:25:34 -04002102 case SDEV_QUIESCE:
Linus Torvalds1da177e2005-04-16 15:20:36 -07002103 case SDEV_OFFLINE:
2104 case SDEV_BLOCK:
2105 break;
2106 default:
2107 goto illegal;
2108 }
2109 break;
2110
2111 case SDEV_DEL:
2112 switch (oldstate) {
Brian King309bd272006-06-27 11:10:43 -05002113 case SDEV_CREATED:
2114 case SDEV_RUNNING:
2115 case SDEV_OFFLINE:
Linus Torvalds1da177e2005-04-16 15:20:36 -07002116 case SDEV_CANCEL:
2117 break;
2118 default:
2119 goto illegal;
2120 }
2121 break;
2122
2123 }
2124 sdev->sdev_state = state;
2125 return 0;
2126
2127 illegal:
2128 SCSI_LOG_ERROR_RECOVERY(1,
James Bottomley9ccfc752005-10-02 11:45:08 -05002129 sdev_printk(KERN_ERR, sdev,
2130 "Illegal state transition %s->%s\n",
2131 scsi_device_state_name(oldstate),
2132 scsi_device_state_name(state))
Linus Torvalds1da177e2005-04-16 15:20:36 -07002133 );
2134 return -EINVAL;
2135}
2136EXPORT_SYMBOL(scsi_device_set_state);
2137
2138/**
Jeff Garzika341cd02007-10-29 17:15:22 -04002139 * sdev_evt_emit - emit a single SCSI device uevent
2140 * @sdev: associated SCSI device
2141 * @evt: event to emit
2142 *
2143 * Send a single uevent (scsi_event) to the associated scsi_device.
2144 */
2145static void scsi_evt_emit(struct scsi_device *sdev, struct scsi_event *evt)
2146{
2147 int idx = 0;
2148 char *envp[3];
2149
2150 switch (evt->evt_type) {
2151 case SDEV_EVT_MEDIA_CHANGE:
2152 envp[idx++] = "SDEV_MEDIA_CHANGE=1";
2153 break;
2154
2155 default:
2156 /* do nothing */
2157 break;
2158 }
2159
2160 envp[idx++] = NULL;
2161
2162 kobject_uevent_env(&sdev->sdev_gendev.kobj, KOBJ_CHANGE, envp);
2163}
2164
2165/**
2166 * sdev_evt_thread - send a uevent for each scsi event
2167 * @work: work struct for scsi_device
2168 *
2169 * Dispatch queued events to their associated scsi_device kobjects
2170 * as uevents.
2171 */
2172void scsi_evt_thread(struct work_struct *work)
2173{
2174 struct scsi_device *sdev;
2175 LIST_HEAD(event_list);
2176
2177 sdev = container_of(work, struct scsi_device, event_work);
2178
2179 while (1) {
2180 struct scsi_event *evt;
2181 struct list_head *this, *tmp;
2182 unsigned long flags;
2183
2184 spin_lock_irqsave(&sdev->list_lock, flags);
2185 list_splice_init(&sdev->event_list, &event_list);
2186 spin_unlock_irqrestore(&sdev->list_lock, flags);
2187
2188 if (list_empty(&event_list))
2189 break;
2190
2191 list_for_each_safe(this, tmp, &event_list) {
2192 evt = list_entry(this, struct scsi_event, node);
2193 list_del(&evt->node);
2194 scsi_evt_emit(sdev, evt);
2195 kfree(evt);
2196 }
2197 }
2198}
2199
2200/**
2201 * sdev_evt_send - send asserted event to uevent thread
2202 * @sdev: scsi_device event occurred on
2203 * @evt: event to send
2204 *
2205 * Assert scsi device event asynchronously.
2206 */
2207void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt)
2208{
2209 unsigned long flags;
2210
Kay Sievers4d1566e2008-03-19 13:04:47 +01002211#if 0
2212 /* FIXME: currently this check eliminates all media change events
2213 * for polled devices. Need to update to discriminate between AN
2214 * and polled events */
Jeff Garzika341cd02007-10-29 17:15:22 -04002215 if (!test_bit(evt->evt_type, sdev->supported_events)) {
2216 kfree(evt);
2217 return;
2218 }
Kay Sievers4d1566e2008-03-19 13:04:47 +01002219#endif
Jeff Garzika341cd02007-10-29 17:15:22 -04002220
2221 spin_lock_irqsave(&sdev->list_lock, flags);
2222 list_add_tail(&evt->node, &sdev->event_list);
2223 schedule_work(&sdev->event_work);
2224 spin_unlock_irqrestore(&sdev->list_lock, flags);
2225}
2226EXPORT_SYMBOL_GPL(sdev_evt_send);
2227
2228/**
2229 * sdev_evt_alloc - allocate a new scsi event
2230 * @evt_type: type of event to allocate
2231 * @gfpflags: GFP flags for allocation
2232 *
2233 * Allocates and returns a new scsi_event.
2234 */
2235struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
2236 gfp_t gfpflags)
2237{
2238 struct scsi_event *evt = kzalloc(sizeof(struct scsi_event), gfpflags);
2239 if (!evt)
2240 return NULL;
2241
2242 evt->evt_type = evt_type;
2243 INIT_LIST_HEAD(&evt->node);
2244
2245 /* evt_type-specific initialization, if any */
2246 switch (evt_type) {
2247 case SDEV_EVT_MEDIA_CHANGE:
2248 default:
2249 /* do nothing */
2250 break;
2251 }
2252
2253 return evt;
2254}
2255EXPORT_SYMBOL_GPL(sdev_evt_alloc);
2256
2257/**
2258 * sdev_evt_send_simple - send asserted event to uevent thread
2259 * @sdev: scsi_device event occurred on
2260 * @evt_type: type of event to send
2261 * @gfpflags: GFP flags for allocation
2262 *
2263 * Assert scsi device event asynchronously, given an event type.
2264 */
2265void sdev_evt_send_simple(struct scsi_device *sdev,
2266 enum scsi_device_event evt_type, gfp_t gfpflags)
2267{
2268 struct scsi_event *evt = sdev_evt_alloc(evt_type, gfpflags);
2269 if (!evt) {
2270 sdev_printk(KERN_ERR, sdev, "event %d eaten due to OOM\n",
2271 evt_type);
2272 return;
2273 }
2274
2275 sdev_evt_send(sdev, evt);
2276}
2277EXPORT_SYMBOL_GPL(sdev_evt_send_simple);
2278
2279/**
Linus Torvalds1da177e2005-04-16 15:20:36 -07002280 * scsi_device_quiesce - Block user issued commands.
2281 * @sdev: scsi device to quiesce.
2282 *
2283 * This works by trying to transition to the SDEV_QUIESCE state
2284 * (which must be a legal transition). When the device is in this
2285 * state, only special requests will be accepted, all others will
2286 * be deferred. Since special requests may also be requeued requests,
2287 * a successful return doesn't guarantee the device will be
2288 * totally quiescent.
2289 *
2290 * Must be called with user context, may sleep.
2291 *
2292 * Returns zero if unsuccessful or an error if not.
Rob Landleyeb448202007-11-03 13:30:39 -05002293 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002294int
2295scsi_device_quiesce(struct scsi_device *sdev)
2296{
2297 int err = scsi_device_set_state(sdev, SDEV_QUIESCE);
2298 if (err)
2299 return err;
2300
2301 scsi_run_queue(sdev->request_queue);
2302 while (sdev->device_busy) {
2303 msleep_interruptible(200);
2304 scsi_run_queue(sdev->request_queue);
2305 }
2306 return 0;
2307}
2308EXPORT_SYMBOL(scsi_device_quiesce);
2309
2310/**
2311 * scsi_device_resume - Restart user issued commands to a quiesced device.
2312 * @sdev: scsi device to resume.
2313 *
2314 * Moves the device from quiesced back to running and restarts the
2315 * queues.
2316 *
2317 * Must be called with user context, may sleep.
Rob Landleyeb448202007-11-03 13:30:39 -05002318 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002319void
2320scsi_device_resume(struct scsi_device *sdev)
2321{
2322 if(scsi_device_set_state(sdev, SDEV_RUNNING))
2323 return;
2324 scsi_run_queue(sdev->request_queue);
2325}
2326EXPORT_SYMBOL(scsi_device_resume);
2327
2328static void
2329device_quiesce_fn(struct scsi_device *sdev, void *data)
2330{
2331 scsi_device_quiesce(sdev);
2332}
2333
2334void
2335scsi_target_quiesce(struct scsi_target *starget)
2336{
2337 starget_for_each_device(starget, NULL, device_quiesce_fn);
2338}
2339EXPORT_SYMBOL(scsi_target_quiesce);
2340
2341static void
2342device_resume_fn(struct scsi_device *sdev, void *data)
2343{
2344 scsi_device_resume(sdev);
2345}
2346
2347void
2348scsi_target_resume(struct scsi_target *starget)
2349{
2350 starget_for_each_device(starget, NULL, device_resume_fn);
2351}
2352EXPORT_SYMBOL(scsi_target_resume);
2353
2354/**
Rob Landleyeb448202007-11-03 13:30:39 -05002355 * scsi_internal_device_block - internal function to put a device temporarily into the SDEV_BLOCK state
Linus Torvalds1da177e2005-04-16 15:20:36 -07002356 * @sdev: device to block
2357 *
2358 * Block request made by scsi lld's to temporarily stop all
2359 * scsi commands on the specified device. Called from interrupt
2360 * or normal process context.
2361 *
2362 * Returns zero if successful or error if not
2363 *
2364 * Notes:
2365 * This routine transitions the device to the SDEV_BLOCK state
2366 * (which must be a legal transition). When the device is in this
2367 * state, all commands are deferred until the scsi lld reenables
2368 * the device with scsi_device_unblock or device_block_tmo fires.
2369 * This routine assumes the host_lock is held on entry.
Rob Landleyeb448202007-11-03 13:30:39 -05002370 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002371int
2372scsi_internal_device_block(struct scsi_device *sdev)
2373{
Jens Axboe165125e2007-07-24 09:28:11 +02002374 struct request_queue *q = sdev->request_queue;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002375 unsigned long flags;
2376 int err = 0;
2377
2378 err = scsi_device_set_state(sdev, SDEV_BLOCK);
James Bottomley6f4267e2008-08-22 16:53:31 -05002379 if (err) {
2380 err = scsi_device_set_state(sdev, SDEV_CREATED_BLOCK);
2381
2382 if (err)
2383 return err;
2384 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07002385
2386 /*
2387 * The device has transitioned to SDEV_BLOCK. Stop the
2388 * block layer from calling the midlayer with this device's
2389 * request queue.
2390 */
2391 spin_lock_irqsave(q->queue_lock, flags);
2392 blk_stop_queue(q);
2393 spin_unlock_irqrestore(q->queue_lock, flags);
2394
2395 return 0;
2396}
2397EXPORT_SYMBOL_GPL(scsi_internal_device_block);
2398
2399/**
2400 * scsi_internal_device_unblock - resume a device after a block request
2401 * @sdev: device to resume
2402 *
2403 * Called by scsi lld's or the midlayer to restart the device queue
2404 * for the previously suspended scsi device. Called from interrupt or
2405 * normal process context.
2406 *
2407 * Returns zero if successful or error if not.
2408 *
2409 * Notes:
2410 * This routine transitions the device to the SDEV_RUNNING state
2411 * (which must be a legal transition) allowing the midlayer to
2412 * goose the queue for this device. This routine assumes the
2413 * host_lock is held upon entry.
Rob Landleyeb448202007-11-03 13:30:39 -05002414 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002415int
2416scsi_internal_device_unblock(struct scsi_device *sdev)
2417{
Jens Axboe165125e2007-07-24 09:28:11 +02002418 struct request_queue *q = sdev->request_queue;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002419 unsigned long flags;
2420
2421 /*
2422 * Try to transition the scsi device to SDEV_RUNNING
2423 * and goose the device queue if successful.
2424 */
Takahiro Yasui5c10e632009-04-29 12:13:02 -04002425 if (sdev->sdev_state == SDEV_BLOCK)
2426 sdev->sdev_state = SDEV_RUNNING;
2427 else if (sdev->sdev_state == SDEV_CREATED_BLOCK)
2428 sdev->sdev_state = SDEV_CREATED;
2429 else
2430 return -EINVAL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002431
2432 spin_lock_irqsave(q->queue_lock, flags);
2433 blk_start_queue(q);
2434 spin_unlock_irqrestore(q->queue_lock, flags);
2435
2436 return 0;
2437}
2438EXPORT_SYMBOL_GPL(scsi_internal_device_unblock);
2439
2440static void
2441device_block(struct scsi_device *sdev, void *data)
2442{
2443 scsi_internal_device_block(sdev);
2444}
2445
2446static int
2447target_block(struct device *dev, void *data)
2448{
2449 if (scsi_is_target_device(dev))
2450 starget_for_each_device(to_scsi_target(dev), NULL,
2451 device_block);
2452 return 0;
2453}
2454
2455void
2456scsi_target_block(struct device *dev)
2457{
2458 if (scsi_is_target_device(dev))
2459 starget_for_each_device(to_scsi_target(dev), NULL,
2460 device_block);
2461 else
2462 device_for_each_child(dev, NULL, target_block);
2463}
2464EXPORT_SYMBOL_GPL(scsi_target_block);
2465
2466static void
2467device_unblock(struct scsi_device *sdev, void *data)
2468{
2469 scsi_internal_device_unblock(sdev);
2470}
2471
2472static int
2473target_unblock(struct device *dev, void *data)
2474{
2475 if (scsi_is_target_device(dev))
2476 starget_for_each_device(to_scsi_target(dev), NULL,
2477 device_unblock);
2478 return 0;
2479}
2480
2481void
2482scsi_target_unblock(struct device *dev)
2483{
2484 if (scsi_is_target_device(dev))
2485 starget_for_each_device(to_scsi_target(dev), NULL,
2486 device_unblock);
2487 else
2488 device_for_each_child(dev, NULL, target_unblock);
2489}
2490EXPORT_SYMBOL_GPL(scsi_target_unblock);
Guennadi Liakhovetskicdb8c2a2006-04-02 21:57:43 +02002491
2492/**
2493 * scsi_kmap_atomic_sg - find and atomically map an sg-elemnt
Rob Landleyeb448202007-11-03 13:30:39 -05002494 * @sgl: scatter-gather list
Guennadi Liakhovetskicdb8c2a2006-04-02 21:57:43 +02002495 * @sg_count: number of segments in sg
2496 * @offset: offset in bytes into sg, on return offset into the mapped area
2497 * @len: bytes to map, on return number of bytes mapped
2498 *
2499 * Returns virtual address of the start of the mapped page
2500 */
Jens Axboec6132da2007-10-16 11:08:49 +02002501void *scsi_kmap_atomic_sg(struct scatterlist *sgl, int sg_count,
Guennadi Liakhovetskicdb8c2a2006-04-02 21:57:43 +02002502 size_t *offset, size_t *len)
2503{
2504 int i;
2505 size_t sg_len = 0, len_complete = 0;
Jens Axboec6132da2007-10-16 11:08:49 +02002506 struct scatterlist *sg;
Guennadi Liakhovetskicdb8c2a2006-04-02 21:57:43 +02002507 struct page *page;
2508
Andrew Morton22cfefb2007-02-05 16:39:03 -08002509 WARN_ON(!irqs_disabled());
2510
Jens Axboec6132da2007-10-16 11:08:49 +02002511 for_each_sg(sgl, sg, sg_count, i) {
Guennadi Liakhovetskicdb8c2a2006-04-02 21:57:43 +02002512 len_complete = sg_len; /* Complete sg-entries */
Jens Axboec6132da2007-10-16 11:08:49 +02002513 sg_len += sg->length;
Guennadi Liakhovetskicdb8c2a2006-04-02 21:57:43 +02002514 if (sg_len > *offset)
2515 break;
2516 }
2517
2518 if (unlikely(i == sg_count)) {
Andrew Morton169e1a22006-04-18 21:09:08 -07002519 printk(KERN_ERR "%s: Bytes in sg: %zu, requested offset %zu, "
2520 "elements %d\n",
Harvey Harrisoncadbd4a2008-07-03 23:47:27 -07002521 __func__, sg_len, *offset, sg_count);
Guennadi Liakhovetskicdb8c2a2006-04-02 21:57:43 +02002522 WARN_ON(1);
2523 return NULL;
2524 }
2525
2526 /* Offset starting from the beginning of first page in this sg-entry */
Jens Axboec6132da2007-10-16 11:08:49 +02002527 *offset = *offset - len_complete + sg->offset;
Guennadi Liakhovetskicdb8c2a2006-04-02 21:57:43 +02002528
2529 /* Assumption: contiguous pages can be accessed as "page + i" */
Jens Axboe45711f12007-10-22 21:19:53 +02002530 page = nth_page(sg_page(sg), (*offset >> PAGE_SHIFT));
Guennadi Liakhovetskicdb8c2a2006-04-02 21:57:43 +02002531 *offset &= ~PAGE_MASK;
2532
2533 /* Bytes in this sg-entry from *offset to the end of the page */
2534 sg_len = PAGE_SIZE - *offset;
2535 if (*len > sg_len)
2536 *len = sg_len;
2537
2538 return kmap_atomic(page, KM_BIO_SRC_IRQ);
2539}
2540EXPORT_SYMBOL(scsi_kmap_atomic_sg);
2541
2542/**
Rob Landleyeb448202007-11-03 13:30:39 -05002543 * scsi_kunmap_atomic_sg - atomically unmap a virtual address, previously mapped with scsi_kmap_atomic_sg
Guennadi Liakhovetskicdb8c2a2006-04-02 21:57:43 +02002544 * @virt: virtual address to be unmapped
2545 */
2546void scsi_kunmap_atomic_sg(void *virt)
2547{
2548 kunmap_atomic(virt, KM_BIO_SRC_IRQ);
2549}
2550EXPORT_SYMBOL(scsi_kunmap_atomic_sg);