Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 1 | /* |
| 2 | |
| 3 | Broadcom B43 wireless driver |
| 4 | |
| 5 | Copyright (c) 2005 Martin Langer <martin-langer@gmx.de> |
| 6 | Copyright (c) 2005 Stefano Brivio <st3@riseup.net> |
| 7 | Copyright (c) 2005, 2006 Michael Buesch <mb@bu3sch.de> |
| 8 | Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org> |
| 9 | Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch> |
| 10 | |
| 11 | Some parts of the code in this file are derived from the ipw2200 |
| 12 | driver Copyright(c) 2003 - 2004 Intel Corporation. |
| 13 | |
| 14 | This program is free software; you can redistribute it and/or modify |
| 15 | it under the terms of the GNU General Public License as published by |
| 16 | the Free Software Foundation; either version 2 of the License, or |
| 17 | (at your option) any later version. |
| 18 | |
| 19 | This program is distributed in the hope that it will be useful, |
| 20 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 21 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 22 | GNU General Public License for more details. |
| 23 | |
| 24 | You should have received a copy of the GNU General Public License |
| 25 | along with this program; see the file COPYING. If not, write to |
| 26 | the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, |
| 27 | Boston, MA 02110-1301, USA. |
| 28 | |
| 29 | */ |
| 30 | |
| 31 | #include <linux/delay.h> |
| 32 | #include <linux/init.h> |
| 33 | #include <linux/moduleparam.h> |
| 34 | #include <linux/if_arp.h> |
| 35 | #include <linux/etherdevice.h> |
| 36 | #include <linux/version.h> |
| 37 | #include <linux/firmware.h> |
| 38 | #include <linux/wireless.h> |
| 39 | #include <linux/workqueue.h> |
| 40 | #include <linux/skbuff.h> |
| 41 | #include <linux/dma-mapping.h> |
| 42 | #include <asm/unaligned.h> |
| 43 | |
| 44 | #include "b43.h" |
| 45 | #include "main.h" |
| 46 | #include "debugfs.h" |
| 47 | #include "phy.h" |
| 48 | #include "dma.h" |
| 49 | #include "pio.h" |
| 50 | #include "sysfs.h" |
| 51 | #include "xmit.h" |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 52 | #include "lo.h" |
| 53 | #include "pcmcia.h" |
| 54 | |
| 55 | MODULE_DESCRIPTION("Broadcom B43 wireless driver"); |
| 56 | MODULE_AUTHOR("Martin Langer"); |
| 57 | MODULE_AUTHOR("Stefano Brivio"); |
| 58 | MODULE_AUTHOR("Michael Buesch"); |
| 59 | MODULE_LICENSE("GPL"); |
| 60 | |
| 61 | extern char *nvram_get(char *name); |
| 62 | |
| 63 | #if defined(CONFIG_B43_DMA) && defined(CONFIG_B43_PIO) |
| 64 | static int modparam_pio; |
| 65 | module_param_named(pio, modparam_pio, int, 0444); |
| 66 | MODULE_PARM_DESC(pio, "enable(1) / disable(0) PIO mode"); |
| 67 | #elif defined(CONFIG_B43_DMA) |
| 68 | # define modparam_pio 0 |
| 69 | #elif defined(CONFIG_B43_PIO) |
| 70 | # define modparam_pio 1 |
| 71 | #endif |
| 72 | |
| 73 | static int modparam_bad_frames_preempt; |
| 74 | module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444); |
| 75 | MODULE_PARM_DESC(bad_frames_preempt, |
| 76 | "enable(1) / disable(0) Bad Frames Preemption"); |
| 77 | |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 78 | static char modparam_fwpostfix[16]; |
| 79 | module_param_string(fwpostfix, modparam_fwpostfix, 16, 0444); |
| 80 | MODULE_PARM_DESC(fwpostfix, "Postfix for the .fw files to load."); |
| 81 | |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 82 | static int modparam_hwpctl; |
| 83 | module_param_named(hwpctl, modparam_hwpctl, int, 0444); |
| 84 | MODULE_PARM_DESC(hwpctl, "Enable hardware-side power control (default off)"); |
| 85 | |
| 86 | static int modparam_nohwcrypt; |
| 87 | module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444); |
| 88 | MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); |
| 89 | |
| 90 | static const struct ssb_device_id b43_ssb_tbl[] = { |
| 91 | SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5), |
| 92 | SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 6), |
| 93 | SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 7), |
| 94 | SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 9), |
| 95 | SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 10), |
| 96 | SSB_DEVTABLE_END |
| 97 | }; |
| 98 | |
| 99 | MODULE_DEVICE_TABLE(ssb, b43_ssb_tbl); |
| 100 | |
| 101 | /* Channel and ratetables are shared for all devices. |
| 102 | * They can't be const, because ieee80211 puts some precalculated |
| 103 | * data in there. This data is the same for all devices, so we don't |
| 104 | * get concurrency issues */ |
| 105 | #define RATETAB_ENT(_rateid, _flags) \ |
| 106 | { \ |
| 107 | .rate = B43_RATE_TO_BASE100KBPS(_rateid), \ |
| 108 | .val = (_rateid), \ |
| 109 | .val2 = (_rateid), \ |
| 110 | .flags = (_flags), \ |
| 111 | } |
| 112 | static struct ieee80211_rate __b43_ratetable[] = { |
| 113 | RATETAB_ENT(B43_CCK_RATE_1MB, IEEE80211_RATE_CCK), |
| 114 | RATETAB_ENT(B43_CCK_RATE_2MB, IEEE80211_RATE_CCK_2), |
| 115 | RATETAB_ENT(B43_CCK_RATE_5MB, IEEE80211_RATE_CCK_2), |
| 116 | RATETAB_ENT(B43_CCK_RATE_11MB, IEEE80211_RATE_CCK_2), |
| 117 | RATETAB_ENT(B43_OFDM_RATE_6MB, IEEE80211_RATE_OFDM), |
| 118 | RATETAB_ENT(B43_OFDM_RATE_9MB, IEEE80211_RATE_OFDM), |
| 119 | RATETAB_ENT(B43_OFDM_RATE_12MB, IEEE80211_RATE_OFDM), |
| 120 | RATETAB_ENT(B43_OFDM_RATE_18MB, IEEE80211_RATE_OFDM), |
| 121 | RATETAB_ENT(B43_OFDM_RATE_24MB, IEEE80211_RATE_OFDM), |
| 122 | RATETAB_ENT(B43_OFDM_RATE_36MB, IEEE80211_RATE_OFDM), |
| 123 | RATETAB_ENT(B43_OFDM_RATE_48MB, IEEE80211_RATE_OFDM), |
| 124 | RATETAB_ENT(B43_OFDM_RATE_54MB, IEEE80211_RATE_OFDM), |
| 125 | }; |
| 126 | |
| 127 | #define b43_a_ratetable (__b43_ratetable + 4) |
| 128 | #define b43_a_ratetable_size 8 |
| 129 | #define b43_b_ratetable (__b43_ratetable + 0) |
| 130 | #define b43_b_ratetable_size 4 |
| 131 | #define b43_g_ratetable (__b43_ratetable + 0) |
| 132 | #define b43_g_ratetable_size 12 |
| 133 | |
| 134 | #define CHANTAB_ENT(_chanid, _freq) \ |
| 135 | { \ |
| 136 | .chan = (_chanid), \ |
| 137 | .freq = (_freq), \ |
| 138 | .val = (_chanid), \ |
| 139 | .flag = IEEE80211_CHAN_W_SCAN | \ |
| 140 | IEEE80211_CHAN_W_ACTIVE_SCAN | \ |
| 141 | IEEE80211_CHAN_W_IBSS, \ |
| 142 | .power_level = 0xFF, \ |
| 143 | .antenna_max = 0xFF, \ |
| 144 | } |
| 145 | static struct ieee80211_channel b43_bg_chantable[] = { |
| 146 | CHANTAB_ENT(1, 2412), |
| 147 | CHANTAB_ENT(2, 2417), |
| 148 | CHANTAB_ENT(3, 2422), |
| 149 | CHANTAB_ENT(4, 2427), |
| 150 | CHANTAB_ENT(5, 2432), |
| 151 | CHANTAB_ENT(6, 2437), |
| 152 | CHANTAB_ENT(7, 2442), |
| 153 | CHANTAB_ENT(8, 2447), |
| 154 | CHANTAB_ENT(9, 2452), |
| 155 | CHANTAB_ENT(10, 2457), |
| 156 | CHANTAB_ENT(11, 2462), |
| 157 | CHANTAB_ENT(12, 2467), |
| 158 | CHANTAB_ENT(13, 2472), |
| 159 | CHANTAB_ENT(14, 2484), |
| 160 | }; |
| 161 | |
| 162 | #define b43_bg_chantable_size ARRAY_SIZE(b43_bg_chantable) |
| 163 | static struct ieee80211_channel b43_a_chantable[] = { |
| 164 | CHANTAB_ENT(36, 5180), |
| 165 | CHANTAB_ENT(40, 5200), |
| 166 | CHANTAB_ENT(44, 5220), |
| 167 | CHANTAB_ENT(48, 5240), |
| 168 | CHANTAB_ENT(52, 5260), |
| 169 | CHANTAB_ENT(56, 5280), |
| 170 | CHANTAB_ENT(60, 5300), |
| 171 | CHANTAB_ENT(64, 5320), |
| 172 | CHANTAB_ENT(149, 5745), |
| 173 | CHANTAB_ENT(153, 5765), |
| 174 | CHANTAB_ENT(157, 5785), |
| 175 | CHANTAB_ENT(161, 5805), |
| 176 | CHANTAB_ENT(165, 5825), |
| 177 | }; |
| 178 | |
| 179 | #define b43_a_chantable_size ARRAY_SIZE(b43_a_chantable) |
| 180 | |
| 181 | static void b43_wireless_core_exit(struct b43_wldev *dev); |
| 182 | static int b43_wireless_core_init(struct b43_wldev *dev); |
| 183 | static void b43_wireless_core_stop(struct b43_wldev *dev); |
| 184 | static int b43_wireless_core_start(struct b43_wldev *dev); |
| 185 | |
| 186 | static int b43_ratelimit(struct b43_wl *wl) |
| 187 | { |
| 188 | if (!wl || !wl->current_dev) |
| 189 | return 1; |
| 190 | if (b43_status(wl->current_dev) < B43_STAT_STARTED) |
| 191 | return 1; |
| 192 | /* We are up and running. |
| 193 | * Ratelimit the messages to avoid DoS over the net. */ |
| 194 | return net_ratelimit(); |
| 195 | } |
| 196 | |
| 197 | void b43info(struct b43_wl *wl, const char *fmt, ...) |
| 198 | { |
| 199 | va_list args; |
| 200 | |
| 201 | if (!b43_ratelimit(wl)) |
| 202 | return; |
| 203 | va_start(args, fmt); |
| 204 | printk(KERN_INFO "b43-%s: ", |
| 205 | (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); |
| 206 | vprintk(fmt, args); |
| 207 | va_end(args); |
| 208 | } |
| 209 | |
| 210 | void b43err(struct b43_wl *wl, const char *fmt, ...) |
| 211 | { |
| 212 | va_list args; |
| 213 | |
| 214 | if (!b43_ratelimit(wl)) |
| 215 | return; |
| 216 | va_start(args, fmt); |
| 217 | printk(KERN_ERR "b43-%s ERROR: ", |
| 218 | (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); |
| 219 | vprintk(fmt, args); |
| 220 | va_end(args); |
| 221 | } |
| 222 | |
| 223 | void b43warn(struct b43_wl *wl, const char *fmt, ...) |
| 224 | { |
| 225 | va_list args; |
| 226 | |
| 227 | if (!b43_ratelimit(wl)) |
| 228 | return; |
| 229 | va_start(args, fmt); |
| 230 | printk(KERN_WARNING "b43-%s warning: ", |
| 231 | (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); |
| 232 | vprintk(fmt, args); |
| 233 | va_end(args); |
| 234 | } |
| 235 | |
| 236 | #if B43_DEBUG |
| 237 | void b43dbg(struct b43_wl *wl, const char *fmt, ...) |
| 238 | { |
| 239 | va_list args; |
| 240 | |
| 241 | va_start(args, fmt); |
| 242 | printk(KERN_DEBUG "b43-%s debug: ", |
| 243 | (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan"); |
| 244 | vprintk(fmt, args); |
| 245 | va_end(args); |
| 246 | } |
| 247 | #endif /* DEBUG */ |
| 248 | |
| 249 | static void b43_ram_write(struct b43_wldev *dev, u16 offset, u32 val) |
| 250 | { |
| 251 | u32 macctl; |
| 252 | |
| 253 | B43_WARN_ON(offset % 4 != 0); |
| 254 | |
| 255 | macctl = b43_read32(dev, B43_MMIO_MACCTL); |
| 256 | if (macctl & B43_MACCTL_BE) |
| 257 | val = swab32(val); |
| 258 | |
| 259 | b43_write32(dev, B43_MMIO_RAM_CONTROL, offset); |
| 260 | mmiowb(); |
| 261 | b43_write32(dev, B43_MMIO_RAM_DATA, val); |
| 262 | } |
| 263 | |
| 264 | static inline |
| 265 | void b43_shm_control_word(struct b43_wldev *dev, u16 routing, u16 offset) |
| 266 | { |
| 267 | u32 control; |
| 268 | |
| 269 | /* "offset" is the WORD offset. */ |
| 270 | |
| 271 | control = routing; |
| 272 | control <<= 16; |
| 273 | control |= offset; |
| 274 | b43_write32(dev, B43_MMIO_SHM_CONTROL, control); |
| 275 | } |
| 276 | |
| 277 | u32 b43_shm_read32(struct b43_wldev *dev, u16 routing, u16 offset) |
| 278 | { |
| 279 | u32 ret; |
| 280 | |
| 281 | if (routing == B43_SHM_SHARED) { |
| 282 | B43_WARN_ON(offset & 0x0001); |
| 283 | if (offset & 0x0003) { |
| 284 | /* Unaligned access */ |
| 285 | b43_shm_control_word(dev, routing, offset >> 2); |
| 286 | ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED); |
| 287 | ret <<= 16; |
| 288 | b43_shm_control_word(dev, routing, (offset >> 2) + 1); |
| 289 | ret |= b43_read16(dev, B43_MMIO_SHM_DATA); |
| 290 | |
| 291 | return ret; |
| 292 | } |
| 293 | offset >>= 2; |
| 294 | } |
| 295 | b43_shm_control_word(dev, routing, offset); |
| 296 | ret = b43_read32(dev, B43_MMIO_SHM_DATA); |
| 297 | |
| 298 | return ret; |
| 299 | } |
| 300 | |
| 301 | u16 b43_shm_read16(struct b43_wldev * dev, u16 routing, u16 offset) |
| 302 | { |
| 303 | u16 ret; |
| 304 | |
| 305 | if (routing == B43_SHM_SHARED) { |
| 306 | B43_WARN_ON(offset & 0x0001); |
| 307 | if (offset & 0x0003) { |
| 308 | /* Unaligned access */ |
| 309 | b43_shm_control_word(dev, routing, offset >> 2); |
| 310 | ret = b43_read16(dev, B43_MMIO_SHM_DATA_UNALIGNED); |
| 311 | |
| 312 | return ret; |
| 313 | } |
| 314 | offset >>= 2; |
| 315 | } |
| 316 | b43_shm_control_word(dev, routing, offset); |
| 317 | ret = b43_read16(dev, B43_MMIO_SHM_DATA); |
| 318 | |
| 319 | return ret; |
| 320 | } |
| 321 | |
| 322 | void b43_shm_write32(struct b43_wldev *dev, u16 routing, u16 offset, u32 value) |
| 323 | { |
| 324 | if (routing == B43_SHM_SHARED) { |
| 325 | B43_WARN_ON(offset & 0x0001); |
| 326 | if (offset & 0x0003) { |
| 327 | /* Unaligned access */ |
| 328 | b43_shm_control_word(dev, routing, offset >> 2); |
| 329 | mmiowb(); |
| 330 | b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED, |
| 331 | (value >> 16) & 0xffff); |
| 332 | mmiowb(); |
| 333 | b43_shm_control_word(dev, routing, (offset >> 2) + 1); |
| 334 | mmiowb(); |
| 335 | b43_write16(dev, B43_MMIO_SHM_DATA, value & 0xffff); |
| 336 | return; |
| 337 | } |
| 338 | offset >>= 2; |
| 339 | } |
| 340 | b43_shm_control_word(dev, routing, offset); |
| 341 | mmiowb(); |
| 342 | b43_write32(dev, B43_MMIO_SHM_DATA, value); |
| 343 | } |
| 344 | |
| 345 | void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value) |
| 346 | { |
| 347 | if (routing == B43_SHM_SHARED) { |
| 348 | B43_WARN_ON(offset & 0x0001); |
| 349 | if (offset & 0x0003) { |
| 350 | /* Unaligned access */ |
| 351 | b43_shm_control_word(dev, routing, offset >> 2); |
| 352 | mmiowb(); |
| 353 | b43_write16(dev, B43_MMIO_SHM_DATA_UNALIGNED, value); |
| 354 | return; |
| 355 | } |
| 356 | offset >>= 2; |
| 357 | } |
| 358 | b43_shm_control_word(dev, routing, offset); |
| 359 | mmiowb(); |
| 360 | b43_write16(dev, B43_MMIO_SHM_DATA, value); |
| 361 | } |
| 362 | |
| 363 | /* Read HostFlags */ |
| 364 | u32 b43_hf_read(struct b43_wldev * dev) |
| 365 | { |
| 366 | u32 ret; |
| 367 | |
| 368 | ret = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI); |
| 369 | ret <<= 16; |
| 370 | ret |= b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO); |
| 371 | |
| 372 | return ret; |
| 373 | } |
| 374 | |
| 375 | /* Write HostFlags */ |
| 376 | void b43_hf_write(struct b43_wldev *dev, u32 value) |
| 377 | { |
| 378 | b43_shm_write16(dev, B43_SHM_SHARED, |
| 379 | B43_SHM_SH_HOSTFLO, (value & 0x0000FFFF)); |
| 380 | b43_shm_write16(dev, B43_SHM_SHARED, |
| 381 | B43_SHM_SH_HOSTFHI, ((value & 0xFFFF0000) >> 16)); |
| 382 | } |
| 383 | |
| 384 | void b43_tsf_read(struct b43_wldev *dev, u64 * tsf) |
| 385 | { |
| 386 | /* We need to be careful. As we read the TSF from multiple |
| 387 | * registers, we should take care of register overflows. |
| 388 | * In theory, the whole tsf read process should be atomic. |
| 389 | * We try to be atomic here, by restaring the read process, |
| 390 | * if any of the high registers changed (overflew). |
| 391 | */ |
| 392 | if (dev->dev->id.revision >= 3) { |
| 393 | u32 low, high, high2; |
| 394 | |
| 395 | do { |
| 396 | high = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_HIGH); |
| 397 | low = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_LOW); |
| 398 | high2 = b43_read32(dev, B43_MMIO_REV3PLUS_TSF_HIGH); |
| 399 | } while (unlikely(high != high2)); |
| 400 | |
| 401 | *tsf = high; |
| 402 | *tsf <<= 32; |
| 403 | *tsf |= low; |
| 404 | } else { |
| 405 | u64 tmp; |
| 406 | u16 v0, v1, v2, v3; |
| 407 | u16 test1, test2, test3; |
| 408 | |
| 409 | do { |
| 410 | v3 = b43_read16(dev, B43_MMIO_TSF_3); |
| 411 | v2 = b43_read16(dev, B43_MMIO_TSF_2); |
| 412 | v1 = b43_read16(dev, B43_MMIO_TSF_1); |
| 413 | v0 = b43_read16(dev, B43_MMIO_TSF_0); |
| 414 | |
| 415 | test3 = b43_read16(dev, B43_MMIO_TSF_3); |
| 416 | test2 = b43_read16(dev, B43_MMIO_TSF_2); |
| 417 | test1 = b43_read16(dev, B43_MMIO_TSF_1); |
| 418 | } while (v3 != test3 || v2 != test2 || v1 != test1); |
| 419 | |
| 420 | *tsf = v3; |
| 421 | *tsf <<= 48; |
| 422 | tmp = v2; |
| 423 | tmp <<= 32; |
| 424 | *tsf |= tmp; |
| 425 | tmp = v1; |
| 426 | tmp <<= 16; |
| 427 | *tsf |= tmp; |
| 428 | *tsf |= v0; |
| 429 | } |
| 430 | } |
| 431 | |
| 432 | static void b43_time_lock(struct b43_wldev *dev) |
| 433 | { |
| 434 | u32 macctl; |
| 435 | |
| 436 | macctl = b43_read32(dev, B43_MMIO_MACCTL); |
| 437 | macctl |= B43_MACCTL_TBTTHOLD; |
| 438 | b43_write32(dev, B43_MMIO_MACCTL, macctl); |
| 439 | /* Commit the write */ |
| 440 | b43_read32(dev, B43_MMIO_MACCTL); |
| 441 | } |
| 442 | |
| 443 | static void b43_time_unlock(struct b43_wldev *dev) |
| 444 | { |
| 445 | u32 macctl; |
| 446 | |
| 447 | macctl = b43_read32(dev, B43_MMIO_MACCTL); |
| 448 | macctl &= ~B43_MACCTL_TBTTHOLD; |
| 449 | b43_write32(dev, B43_MMIO_MACCTL, macctl); |
| 450 | /* Commit the write */ |
| 451 | b43_read32(dev, B43_MMIO_MACCTL); |
| 452 | } |
| 453 | |
| 454 | static void b43_tsf_write_locked(struct b43_wldev *dev, u64 tsf) |
| 455 | { |
| 456 | /* Be careful with the in-progress timer. |
| 457 | * First zero out the low register, so we have a full |
| 458 | * register-overflow duration to complete the operation. |
| 459 | */ |
| 460 | if (dev->dev->id.revision >= 3) { |
| 461 | u32 lo = (tsf & 0x00000000FFFFFFFFULL); |
| 462 | u32 hi = (tsf & 0xFFFFFFFF00000000ULL) >> 32; |
| 463 | |
| 464 | b43_write32(dev, B43_MMIO_REV3PLUS_TSF_LOW, 0); |
| 465 | mmiowb(); |
| 466 | b43_write32(dev, B43_MMIO_REV3PLUS_TSF_HIGH, hi); |
| 467 | mmiowb(); |
| 468 | b43_write32(dev, B43_MMIO_REV3PLUS_TSF_LOW, lo); |
| 469 | } else { |
| 470 | u16 v0 = (tsf & 0x000000000000FFFFULL); |
| 471 | u16 v1 = (tsf & 0x00000000FFFF0000ULL) >> 16; |
| 472 | u16 v2 = (tsf & 0x0000FFFF00000000ULL) >> 32; |
| 473 | u16 v3 = (tsf & 0xFFFF000000000000ULL) >> 48; |
| 474 | |
| 475 | b43_write16(dev, B43_MMIO_TSF_0, 0); |
| 476 | mmiowb(); |
| 477 | b43_write16(dev, B43_MMIO_TSF_3, v3); |
| 478 | mmiowb(); |
| 479 | b43_write16(dev, B43_MMIO_TSF_2, v2); |
| 480 | mmiowb(); |
| 481 | b43_write16(dev, B43_MMIO_TSF_1, v1); |
| 482 | mmiowb(); |
| 483 | b43_write16(dev, B43_MMIO_TSF_0, v0); |
| 484 | } |
| 485 | } |
| 486 | |
| 487 | void b43_tsf_write(struct b43_wldev *dev, u64 tsf) |
| 488 | { |
| 489 | b43_time_lock(dev); |
| 490 | b43_tsf_write_locked(dev, tsf); |
| 491 | b43_time_unlock(dev); |
| 492 | } |
| 493 | |
| 494 | static |
| 495 | void b43_macfilter_set(struct b43_wldev *dev, u16 offset, const u8 * mac) |
| 496 | { |
| 497 | static const u8 zero_addr[ETH_ALEN] = { 0 }; |
| 498 | u16 data; |
| 499 | |
| 500 | if (!mac) |
| 501 | mac = zero_addr; |
| 502 | |
| 503 | offset |= 0x0020; |
| 504 | b43_write16(dev, B43_MMIO_MACFILTER_CONTROL, offset); |
| 505 | |
| 506 | data = mac[0]; |
| 507 | data |= mac[1] << 8; |
| 508 | b43_write16(dev, B43_MMIO_MACFILTER_DATA, data); |
| 509 | data = mac[2]; |
| 510 | data |= mac[3] << 8; |
| 511 | b43_write16(dev, B43_MMIO_MACFILTER_DATA, data); |
| 512 | data = mac[4]; |
| 513 | data |= mac[5] << 8; |
| 514 | b43_write16(dev, B43_MMIO_MACFILTER_DATA, data); |
| 515 | } |
| 516 | |
| 517 | static void b43_write_mac_bssid_templates(struct b43_wldev *dev) |
| 518 | { |
| 519 | const u8 *mac; |
| 520 | const u8 *bssid; |
| 521 | u8 mac_bssid[ETH_ALEN * 2]; |
| 522 | int i; |
| 523 | u32 tmp; |
| 524 | |
| 525 | bssid = dev->wl->bssid; |
| 526 | mac = dev->wl->mac_addr; |
| 527 | |
| 528 | b43_macfilter_set(dev, B43_MACFILTER_BSSID, bssid); |
| 529 | |
| 530 | memcpy(mac_bssid, mac, ETH_ALEN); |
| 531 | memcpy(mac_bssid + ETH_ALEN, bssid, ETH_ALEN); |
| 532 | |
| 533 | /* Write our MAC address and BSSID to template ram */ |
| 534 | for (i = 0; i < ARRAY_SIZE(mac_bssid); i += sizeof(u32)) { |
| 535 | tmp = (u32) (mac_bssid[i + 0]); |
| 536 | tmp |= (u32) (mac_bssid[i + 1]) << 8; |
| 537 | tmp |= (u32) (mac_bssid[i + 2]) << 16; |
| 538 | tmp |= (u32) (mac_bssid[i + 3]) << 24; |
| 539 | b43_ram_write(dev, 0x20 + i, tmp); |
| 540 | } |
| 541 | } |
| 542 | |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 543 | static void b43_upload_card_macaddress(struct b43_wldev *dev) |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 544 | { |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 545 | b43_write_mac_bssid_templates(dev); |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 546 | b43_macfilter_set(dev, B43_MACFILTER_SELF, dev->wl->mac_addr); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 547 | } |
| 548 | |
| 549 | static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time) |
| 550 | { |
| 551 | /* slot_time is in usec. */ |
| 552 | if (dev->phy.type != B43_PHYTYPE_G) |
| 553 | return; |
| 554 | b43_write16(dev, 0x684, 510 + slot_time); |
| 555 | b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time); |
| 556 | } |
| 557 | |
| 558 | static void b43_short_slot_timing_enable(struct b43_wldev *dev) |
| 559 | { |
| 560 | b43_set_slot_time(dev, 9); |
| 561 | dev->short_slot = 1; |
| 562 | } |
| 563 | |
| 564 | static void b43_short_slot_timing_disable(struct b43_wldev *dev) |
| 565 | { |
| 566 | b43_set_slot_time(dev, 20); |
| 567 | dev->short_slot = 0; |
| 568 | } |
| 569 | |
| 570 | /* Enable a Generic IRQ. "mask" is the mask of which IRQs to enable. |
| 571 | * Returns the _previously_ enabled IRQ mask. |
| 572 | */ |
| 573 | static inline u32 b43_interrupt_enable(struct b43_wldev *dev, u32 mask) |
| 574 | { |
| 575 | u32 old_mask; |
| 576 | |
| 577 | old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); |
| 578 | b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask | mask); |
| 579 | |
| 580 | return old_mask; |
| 581 | } |
| 582 | |
| 583 | /* Disable a Generic IRQ. "mask" is the mask of which IRQs to disable. |
| 584 | * Returns the _previously_ enabled IRQ mask. |
| 585 | */ |
| 586 | static inline u32 b43_interrupt_disable(struct b43_wldev *dev, u32 mask) |
| 587 | { |
| 588 | u32 old_mask; |
| 589 | |
| 590 | old_mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); |
| 591 | b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, old_mask & ~mask); |
| 592 | |
| 593 | return old_mask; |
| 594 | } |
| 595 | |
| 596 | /* Synchronize IRQ top- and bottom-half. |
| 597 | * IRQs must be masked before calling this. |
| 598 | * This must not be called with the irq_lock held. |
| 599 | */ |
| 600 | static void b43_synchronize_irq(struct b43_wldev *dev) |
| 601 | { |
| 602 | synchronize_irq(dev->dev->irq); |
| 603 | tasklet_kill(&dev->isr_tasklet); |
| 604 | } |
| 605 | |
| 606 | /* DummyTransmission function, as documented on |
| 607 | * http://bcm-specs.sipsolutions.net/DummyTransmission |
| 608 | */ |
| 609 | void b43_dummy_transmission(struct b43_wldev *dev) |
| 610 | { |
| 611 | struct b43_phy *phy = &dev->phy; |
| 612 | unsigned int i, max_loop; |
| 613 | u16 value; |
| 614 | u32 buffer[5] = { |
| 615 | 0x00000000, |
| 616 | 0x00D40000, |
| 617 | 0x00000000, |
| 618 | 0x01000000, |
| 619 | 0x00000000, |
| 620 | }; |
| 621 | |
| 622 | switch (phy->type) { |
| 623 | case B43_PHYTYPE_A: |
| 624 | max_loop = 0x1E; |
| 625 | buffer[0] = 0x000201CC; |
| 626 | break; |
| 627 | case B43_PHYTYPE_B: |
| 628 | case B43_PHYTYPE_G: |
| 629 | max_loop = 0xFA; |
| 630 | buffer[0] = 0x000B846E; |
| 631 | break; |
| 632 | default: |
| 633 | B43_WARN_ON(1); |
| 634 | return; |
| 635 | } |
| 636 | |
| 637 | for (i = 0; i < 5; i++) |
| 638 | b43_ram_write(dev, i * 4, buffer[i]); |
| 639 | |
| 640 | /* Commit writes */ |
| 641 | b43_read32(dev, B43_MMIO_MACCTL); |
| 642 | |
| 643 | b43_write16(dev, 0x0568, 0x0000); |
| 644 | b43_write16(dev, 0x07C0, 0x0000); |
| 645 | value = ((phy->type == B43_PHYTYPE_A) ? 1 : 0); |
| 646 | b43_write16(dev, 0x050C, value); |
| 647 | b43_write16(dev, 0x0508, 0x0000); |
| 648 | b43_write16(dev, 0x050A, 0x0000); |
| 649 | b43_write16(dev, 0x054C, 0x0000); |
| 650 | b43_write16(dev, 0x056A, 0x0014); |
| 651 | b43_write16(dev, 0x0568, 0x0826); |
| 652 | b43_write16(dev, 0x0500, 0x0000); |
| 653 | b43_write16(dev, 0x0502, 0x0030); |
| 654 | |
| 655 | if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5) |
| 656 | b43_radio_write16(dev, 0x0051, 0x0017); |
| 657 | for (i = 0x00; i < max_loop; i++) { |
| 658 | value = b43_read16(dev, 0x050E); |
| 659 | if (value & 0x0080) |
| 660 | break; |
| 661 | udelay(10); |
| 662 | } |
| 663 | for (i = 0x00; i < 0x0A; i++) { |
| 664 | value = b43_read16(dev, 0x050E); |
| 665 | if (value & 0x0400) |
| 666 | break; |
| 667 | udelay(10); |
| 668 | } |
| 669 | for (i = 0x00; i < 0x0A; i++) { |
| 670 | value = b43_read16(dev, 0x0690); |
| 671 | if (!(value & 0x0100)) |
| 672 | break; |
| 673 | udelay(10); |
| 674 | } |
| 675 | if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5) |
| 676 | b43_radio_write16(dev, 0x0051, 0x0037); |
| 677 | } |
| 678 | |
| 679 | static void key_write(struct b43_wldev *dev, |
| 680 | u8 index, u8 algorithm, const u8 * key) |
| 681 | { |
| 682 | unsigned int i; |
| 683 | u32 offset; |
| 684 | u16 value; |
| 685 | u16 kidx; |
| 686 | |
| 687 | /* Key index/algo block */ |
| 688 | kidx = b43_kidx_to_fw(dev, index); |
| 689 | value = ((kidx << 4) | algorithm); |
| 690 | b43_shm_write16(dev, B43_SHM_SHARED, |
| 691 | B43_SHM_SH_KEYIDXBLOCK + (kidx * 2), value); |
| 692 | |
| 693 | /* Write the key to the Key Table Pointer offset */ |
| 694 | offset = dev->ktp + (index * B43_SEC_KEYSIZE); |
| 695 | for (i = 0; i < B43_SEC_KEYSIZE; i += 2) { |
| 696 | value = key[i]; |
| 697 | value |= (u16) (key[i + 1]) << 8; |
| 698 | b43_shm_write16(dev, B43_SHM_SHARED, offset + i, value); |
| 699 | } |
| 700 | } |
| 701 | |
| 702 | static void keymac_write(struct b43_wldev *dev, u8 index, const u8 * addr) |
| 703 | { |
| 704 | u32 addrtmp[2] = { 0, 0, }; |
| 705 | u8 per_sta_keys_start = 8; |
| 706 | |
| 707 | if (b43_new_kidx_api(dev)) |
| 708 | per_sta_keys_start = 4; |
| 709 | |
| 710 | B43_WARN_ON(index < per_sta_keys_start); |
| 711 | /* We have two default TX keys and possibly two default RX keys. |
| 712 | * Physical mac 0 is mapped to physical key 4 or 8, depending |
| 713 | * on the firmware version. |
| 714 | * So we must adjust the index here. |
| 715 | */ |
| 716 | index -= per_sta_keys_start; |
| 717 | |
| 718 | if (addr) { |
| 719 | addrtmp[0] = addr[0]; |
| 720 | addrtmp[0] |= ((u32) (addr[1]) << 8); |
| 721 | addrtmp[0] |= ((u32) (addr[2]) << 16); |
| 722 | addrtmp[0] |= ((u32) (addr[3]) << 24); |
| 723 | addrtmp[1] = addr[4]; |
| 724 | addrtmp[1] |= ((u32) (addr[5]) << 8); |
| 725 | } |
| 726 | |
| 727 | if (dev->dev->id.revision >= 5) { |
| 728 | /* Receive match transmitter address mechanism */ |
| 729 | b43_shm_write32(dev, B43_SHM_RCMTA, |
| 730 | (index * 2) + 0, addrtmp[0]); |
| 731 | b43_shm_write16(dev, B43_SHM_RCMTA, |
| 732 | (index * 2) + 1, addrtmp[1]); |
| 733 | } else { |
| 734 | /* RXE (Receive Engine) and |
| 735 | * PSM (Programmable State Machine) mechanism |
| 736 | */ |
| 737 | if (index < 8) { |
| 738 | /* TODO write to RCM 16, 19, 22 and 25 */ |
| 739 | } else { |
| 740 | b43_shm_write32(dev, B43_SHM_SHARED, |
| 741 | B43_SHM_SH_PSM + (index * 6) + 0, |
| 742 | addrtmp[0]); |
| 743 | b43_shm_write16(dev, B43_SHM_SHARED, |
| 744 | B43_SHM_SH_PSM + (index * 6) + 4, |
| 745 | addrtmp[1]); |
| 746 | } |
| 747 | } |
| 748 | } |
| 749 | |
| 750 | static void do_key_write(struct b43_wldev *dev, |
| 751 | u8 index, u8 algorithm, |
| 752 | const u8 * key, size_t key_len, const u8 * mac_addr) |
| 753 | { |
| 754 | u8 buf[B43_SEC_KEYSIZE] = { 0, }; |
| 755 | u8 per_sta_keys_start = 8; |
| 756 | |
| 757 | if (b43_new_kidx_api(dev)) |
| 758 | per_sta_keys_start = 4; |
| 759 | |
| 760 | B43_WARN_ON(index >= dev->max_nr_keys); |
| 761 | B43_WARN_ON(key_len > B43_SEC_KEYSIZE); |
| 762 | |
| 763 | if (index >= per_sta_keys_start) |
| 764 | keymac_write(dev, index, NULL); /* First zero out mac. */ |
| 765 | if (key) |
| 766 | memcpy(buf, key, key_len); |
| 767 | key_write(dev, index, algorithm, buf); |
| 768 | if (index >= per_sta_keys_start) |
| 769 | keymac_write(dev, index, mac_addr); |
| 770 | |
| 771 | dev->key[index].algorithm = algorithm; |
| 772 | } |
| 773 | |
| 774 | static int b43_key_write(struct b43_wldev *dev, |
| 775 | int index, u8 algorithm, |
| 776 | const u8 * key, size_t key_len, |
| 777 | const u8 * mac_addr, |
| 778 | struct ieee80211_key_conf *keyconf) |
| 779 | { |
| 780 | int i; |
| 781 | int sta_keys_start; |
| 782 | |
| 783 | if (key_len > B43_SEC_KEYSIZE) |
| 784 | return -EINVAL; |
| 785 | for (i = 0; i < dev->max_nr_keys; i++) { |
| 786 | /* Check that we don't already have this key. */ |
| 787 | B43_WARN_ON(dev->key[i].keyconf == keyconf); |
| 788 | } |
| 789 | if (index < 0) { |
| 790 | /* Either pairwise key or address is 00:00:00:00:00:00 |
| 791 | * for transmit-only keys. Search the index. */ |
| 792 | if (b43_new_kidx_api(dev)) |
| 793 | sta_keys_start = 4; |
| 794 | else |
| 795 | sta_keys_start = 8; |
| 796 | for (i = sta_keys_start; i < dev->max_nr_keys; i++) { |
| 797 | if (!dev->key[i].keyconf) { |
| 798 | /* found empty */ |
| 799 | index = i; |
| 800 | break; |
| 801 | } |
| 802 | } |
| 803 | if (index < 0) { |
| 804 | b43err(dev->wl, "Out of hardware key memory\n"); |
| 805 | return -ENOSPC; |
| 806 | } |
| 807 | } else |
| 808 | B43_WARN_ON(index > 3); |
| 809 | |
| 810 | do_key_write(dev, index, algorithm, key, key_len, mac_addr); |
| 811 | if ((index <= 3) && !b43_new_kidx_api(dev)) { |
| 812 | /* Default RX key */ |
| 813 | B43_WARN_ON(mac_addr); |
| 814 | do_key_write(dev, index + 4, algorithm, key, key_len, NULL); |
| 815 | } |
| 816 | keyconf->hw_key_idx = index; |
| 817 | dev->key[index].keyconf = keyconf; |
| 818 | |
| 819 | return 0; |
| 820 | } |
| 821 | |
| 822 | static int b43_key_clear(struct b43_wldev *dev, int index) |
| 823 | { |
| 824 | if (B43_WARN_ON((index < 0) || (index >= dev->max_nr_keys))) |
| 825 | return -EINVAL; |
| 826 | do_key_write(dev, index, B43_SEC_ALGO_NONE, |
| 827 | NULL, B43_SEC_KEYSIZE, NULL); |
| 828 | if ((index <= 3) && !b43_new_kidx_api(dev)) { |
| 829 | do_key_write(dev, index + 4, B43_SEC_ALGO_NONE, |
| 830 | NULL, B43_SEC_KEYSIZE, NULL); |
| 831 | } |
| 832 | dev->key[index].keyconf = NULL; |
| 833 | |
| 834 | return 0; |
| 835 | } |
| 836 | |
| 837 | static void b43_clear_keys(struct b43_wldev *dev) |
| 838 | { |
| 839 | int i; |
| 840 | |
| 841 | for (i = 0; i < dev->max_nr_keys; i++) |
| 842 | b43_key_clear(dev, i); |
| 843 | } |
| 844 | |
| 845 | void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags) |
| 846 | { |
| 847 | u32 macctl; |
| 848 | u16 ucstat; |
| 849 | bool hwps; |
| 850 | bool awake; |
| 851 | int i; |
| 852 | |
| 853 | B43_WARN_ON((ps_flags & B43_PS_ENABLED) && |
| 854 | (ps_flags & B43_PS_DISABLED)); |
| 855 | B43_WARN_ON((ps_flags & B43_PS_AWAKE) && (ps_flags & B43_PS_ASLEEP)); |
| 856 | |
| 857 | if (ps_flags & B43_PS_ENABLED) { |
| 858 | hwps = 1; |
| 859 | } else if (ps_flags & B43_PS_DISABLED) { |
| 860 | hwps = 0; |
| 861 | } else { |
| 862 | //TODO: If powersave is not off and FIXME is not set and we are not in adhoc |
| 863 | // and thus is not an AP and we are associated, set bit 25 |
| 864 | } |
| 865 | if (ps_flags & B43_PS_AWAKE) { |
| 866 | awake = 1; |
| 867 | } else if (ps_flags & B43_PS_ASLEEP) { |
| 868 | awake = 0; |
| 869 | } else { |
| 870 | //TODO: If the device is awake or this is an AP, or we are scanning, or FIXME, |
| 871 | // or we are associated, or FIXME, or the latest PS-Poll packet sent was |
| 872 | // successful, set bit26 |
| 873 | } |
| 874 | |
| 875 | /* FIXME: For now we force awake-on and hwps-off */ |
| 876 | hwps = 0; |
| 877 | awake = 1; |
| 878 | |
| 879 | macctl = b43_read32(dev, B43_MMIO_MACCTL); |
| 880 | if (hwps) |
| 881 | macctl |= B43_MACCTL_HWPS; |
| 882 | else |
| 883 | macctl &= ~B43_MACCTL_HWPS; |
| 884 | if (awake) |
| 885 | macctl |= B43_MACCTL_AWAKE; |
| 886 | else |
| 887 | macctl &= ~B43_MACCTL_AWAKE; |
| 888 | b43_write32(dev, B43_MMIO_MACCTL, macctl); |
| 889 | /* Commit write */ |
| 890 | b43_read32(dev, B43_MMIO_MACCTL); |
| 891 | if (awake && dev->dev->id.revision >= 5) { |
| 892 | /* Wait for the microcode to wake up. */ |
| 893 | for (i = 0; i < 100; i++) { |
| 894 | ucstat = b43_shm_read16(dev, B43_SHM_SHARED, |
| 895 | B43_SHM_SH_UCODESTAT); |
| 896 | if (ucstat != B43_SHM_SH_UCODESTAT_SLEEP) |
| 897 | break; |
| 898 | udelay(10); |
| 899 | } |
| 900 | } |
| 901 | } |
| 902 | |
| 903 | /* Turn the Analog ON/OFF */ |
| 904 | static void b43_switch_analog(struct b43_wldev *dev, int on) |
| 905 | { |
| 906 | b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4); |
| 907 | } |
| 908 | |
| 909 | void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags) |
| 910 | { |
| 911 | u32 tmslow; |
| 912 | u32 macctl; |
| 913 | |
| 914 | flags |= B43_TMSLOW_PHYCLKEN; |
| 915 | flags |= B43_TMSLOW_PHYRESET; |
| 916 | ssb_device_enable(dev->dev, flags); |
| 917 | msleep(2); /* Wait for the PLL to turn on. */ |
| 918 | |
| 919 | /* Now take the PHY out of Reset again */ |
| 920 | tmslow = ssb_read32(dev->dev, SSB_TMSLOW); |
| 921 | tmslow |= SSB_TMSLOW_FGC; |
| 922 | tmslow &= ~B43_TMSLOW_PHYRESET; |
| 923 | ssb_write32(dev->dev, SSB_TMSLOW, tmslow); |
| 924 | ssb_read32(dev->dev, SSB_TMSLOW); /* flush */ |
| 925 | msleep(1); |
| 926 | tmslow &= ~SSB_TMSLOW_FGC; |
| 927 | ssb_write32(dev->dev, SSB_TMSLOW, tmslow); |
| 928 | ssb_read32(dev->dev, SSB_TMSLOW); /* flush */ |
| 929 | msleep(1); |
| 930 | |
| 931 | /* Turn Analog ON */ |
| 932 | b43_switch_analog(dev, 1); |
| 933 | |
| 934 | macctl = b43_read32(dev, B43_MMIO_MACCTL); |
| 935 | macctl &= ~B43_MACCTL_GMODE; |
| 936 | if (flags & B43_TMSLOW_GMODE) |
| 937 | macctl |= B43_MACCTL_GMODE; |
| 938 | macctl |= B43_MACCTL_IHR_ENABLED; |
| 939 | b43_write32(dev, B43_MMIO_MACCTL, macctl); |
| 940 | } |
| 941 | |
| 942 | static void handle_irq_transmit_status(struct b43_wldev *dev) |
| 943 | { |
| 944 | u32 v0, v1; |
| 945 | u16 tmp; |
| 946 | struct b43_txstatus stat; |
| 947 | |
| 948 | while (1) { |
| 949 | v0 = b43_read32(dev, B43_MMIO_XMITSTAT_0); |
| 950 | if (!(v0 & 0x00000001)) |
| 951 | break; |
| 952 | v1 = b43_read32(dev, B43_MMIO_XMITSTAT_1); |
| 953 | |
| 954 | stat.cookie = (v0 >> 16); |
| 955 | stat.seq = (v1 & 0x0000FFFF); |
| 956 | stat.phy_stat = ((v1 & 0x00FF0000) >> 16); |
| 957 | tmp = (v0 & 0x0000FFFF); |
| 958 | stat.frame_count = ((tmp & 0xF000) >> 12); |
| 959 | stat.rts_count = ((tmp & 0x0F00) >> 8); |
| 960 | stat.supp_reason = ((tmp & 0x001C) >> 2); |
| 961 | stat.pm_indicated = !!(tmp & 0x0080); |
| 962 | stat.intermediate = !!(tmp & 0x0040); |
| 963 | stat.for_ampdu = !!(tmp & 0x0020); |
| 964 | stat.acked = !!(tmp & 0x0002); |
| 965 | |
| 966 | b43_handle_txstatus(dev, &stat); |
| 967 | } |
| 968 | } |
| 969 | |
| 970 | static void drain_txstatus_queue(struct b43_wldev *dev) |
| 971 | { |
| 972 | u32 dummy; |
| 973 | |
| 974 | if (dev->dev->id.revision < 5) |
| 975 | return; |
| 976 | /* Read all entries from the microcode TXstatus FIFO |
| 977 | * and throw them away. |
| 978 | */ |
| 979 | while (1) { |
| 980 | dummy = b43_read32(dev, B43_MMIO_XMITSTAT_0); |
| 981 | if (!(dummy & 0x00000001)) |
| 982 | break; |
| 983 | dummy = b43_read32(dev, B43_MMIO_XMITSTAT_1); |
| 984 | } |
| 985 | } |
| 986 | |
| 987 | static u32 b43_jssi_read(struct b43_wldev *dev) |
| 988 | { |
| 989 | u32 val = 0; |
| 990 | |
| 991 | val = b43_shm_read16(dev, B43_SHM_SHARED, 0x08A); |
| 992 | val <<= 16; |
| 993 | val |= b43_shm_read16(dev, B43_SHM_SHARED, 0x088); |
| 994 | |
| 995 | return val; |
| 996 | } |
| 997 | |
| 998 | static void b43_jssi_write(struct b43_wldev *dev, u32 jssi) |
| 999 | { |
| 1000 | b43_shm_write16(dev, B43_SHM_SHARED, 0x088, (jssi & 0x0000FFFF)); |
| 1001 | b43_shm_write16(dev, B43_SHM_SHARED, 0x08A, (jssi & 0xFFFF0000) >> 16); |
| 1002 | } |
| 1003 | |
| 1004 | static void b43_generate_noise_sample(struct b43_wldev *dev) |
| 1005 | { |
| 1006 | b43_jssi_write(dev, 0x7F7F7F7F); |
| 1007 | b43_write32(dev, B43_MMIO_STATUS2_BITFIELD, |
| 1008 | b43_read32(dev, B43_MMIO_STATUS2_BITFIELD) |
| 1009 | | (1 << 4)); |
| 1010 | B43_WARN_ON(dev->noisecalc.channel_at_start != dev->phy.channel); |
| 1011 | } |
| 1012 | |
| 1013 | static void b43_calculate_link_quality(struct b43_wldev *dev) |
| 1014 | { |
| 1015 | /* Top half of Link Quality calculation. */ |
| 1016 | |
| 1017 | if (dev->noisecalc.calculation_running) |
| 1018 | return; |
| 1019 | dev->noisecalc.channel_at_start = dev->phy.channel; |
| 1020 | dev->noisecalc.calculation_running = 1; |
| 1021 | dev->noisecalc.nr_samples = 0; |
| 1022 | |
| 1023 | b43_generate_noise_sample(dev); |
| 1024 | } |
| 1025 | |
| 1026 | static void handle_irq_noise(struct b43_wldev *dev) |
| 1027 | { |
| 1028 | struct b43_phy *phy = &dev->phy; |
| 1029 | u16 tmp; |
| 1030 | u8 noise[4]; |
| 1031 | u8 i, j; |
| 1032 | s32 average; |
| 1033 | |
| 1034 | /* Bottom half of Link Quality calculation. */ |
| 1035 | |
| 1036 | B43_WARN_ON(!dev->noisecalc.calculation_running); |
| 1037 | if (dev->noisecalc.channel_at_start != phy->channel) |
| 1038 | goto drop_calculation; |
Michael Buesch | 1a09404 | 2007-09-20 11:13:40 -0700 | [diff] [blame] | 1039 | *((__le32 *)noise) = cpu_to_le32(b43_jssi_read(dev)); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 1040 | if (noise[0] == 0x7F || noise[1] == 0x7F || |
| 1041 | noise[2] == 0x7F || noise[3] == 0x7F) |
| 1042 | goto generate_new; |
| 1043 | |
| 1044 | /* Get the noise samples. */ |
| 1045 | B43_WARN_ON(dev->noisecalc.nr_samples >= 8); |
| 1046 | i = dev->noisecalc.nr_samples; |
| 1047 | noise[0] = limit_value(noise[0], 0, ARRAY_SIZE(phy->nrssi_lt) - 1); |
| 1048 | noise[1] = limit_value(noise[1], 0, ARRAY_SIZE(phy->nrssi_lt) - 1); |
| 1049 | noise[2] = limit_value(noise[2], 0, ARRAY_SIZE(phy->nrssi_lt) - 1); |
| 1050 | noise[3] = limit_value(noise[3], 0, ARRAY_SIZE(phy->nrssi_lt) - 1); |
| 1051 | dev->noisecalc.samples[i][0] = phy->nrssi_lt[noise[0]]; |
| 1052 | dev->noisecalc.samples[i][1] = phy->nrssi_lt[noise[1]]; |
| 1053 | dev->noisecalc.samples[i][2] = phy->nrssi_lt[noise[2]]; |
| 1054 | dev->noisecalc.samples[i][3] = phy->nrssi_lt[noise[3]]; |
| 1055 | dev->noisecalc.nr_samples++; |
| 1056 | if (dev->noisecalc.nr_samples == 8) { |
| 1057 | /* Calculate the Link Quality by the noise samples. */ |
| 1058 | average = 0; |
| 1059 | for (i = 0; i < 8; i++) { |
| 1060 | for (j = 0; j < 4; j++) |
| 1061 | average += dev->noisecalc.samples[i][j]; |
| 1062 | } |
| 1063 | average /= (8 * 4); |
| 1064 | average *= 125; |
| 1065 | average += 64; |
| 1066 | average /= 128; |
| 1067 | tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x40C); |
| 1068 | tmp = (tmp / 128) & 0x1F; |
| 1069 | if (tmp >= 8) |
| 1070 | average += 2; |
| 1071 | else |
| 1072 | average -= 25; |
| 1073 | if (tmp == 8) |
| 1074 | average -= 72; |
| 1075 | else |
| 1076 | average -= 48; |
| 1077 | |
| 1078 | dev->stats.link_noise = average; |
| 1079 | drop_calculation: |
| 1080 | dev->noisecalc.calculation_running = 0; |
| 1081 | return; |
| 1082 | } |
| 1083 | generate_new: |
| 1084 | b43_generate_noise_sample(dev); |
| 1085 | } |
| 1086 | |
| 1087 | static void handle_irq_tbtt_indication(struct b43_wldev *dev) |
| 1088 | { |
| 1089 | if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) { |
| 1090 | ///TODO: PS TBTT |
| 1091 | } else { |
| 1092 | if (1 /*FIXME: the last PSpoll frame was sent successfully */ ) |
| 1093 | b43_power_saving_ctl_bits(dev, 0); |
| 1094 | } |
| 1095 | dev->reg124_set_0x4 = 0; |
| 1096 | if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS)) |
| 1097 | dev->reg124_set_0x4 = 1; |
| 1098 | } |
| 1099 | |
| 1100 | static void handle_irq_atim_end(struct b43_wldev *dev) |
| 1101 | { |
| 1102 | if (!dev->reg124_set_0x4 /*FIXME rename this variable */ ) |
| 1103 | return; |
| 1104 | b43_write32(dev, B43_MMIO_STATUS2_BITFIELD, |
| 1105 | b43_read32(dev, B43_MMIO_STATUS2_BITFIELD) |
| 1106 | | 0x4); |
| 1107 | } |
| 1108 | |
| 1109 | static void handle_irq_pmq(struct b43_wldev *dev) |
| 1110 | { |
| 1111 | u32 tmp; |
| 1112 | |
| 1113 | //TODO: AP mode. |
| 1114 | |
| 1115 | while (1) { |
| 1116 | tmp = b43_read32(dev, B43_MMIO_PS_STATUS); |
| 1117 | if (!(tmp & 0x00000008)) |
| 1118 | break; |
| 1119 | } |
| 1120 | /* 16bit write is odd, but correct. */ |
| 1121 | b43_write16(dev, B43_MMIO_PS_STATUS, 0x0002); |
| 1122 | } |
| 1123 | |
| 1124 | static void b43_write_template_common(struct b43_wldev *dev, |
| 1125 | const u8 * data, u16 size, |
| 1126 | u16 ram_offset, |
| 1127 | u16 shm_size_offset, u8 rate) |
| 1128 | { |
| 1129 | u32 i, tmp; |
| 1130 | struct b43_plcp_hdr4 plcp; |
| 1131 | |
| 1132 | plcp.data = 0; |
| 1133 | b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate); |
| 1134 | b43_ram_write(dev, ram_offset, le32_to_cpu(plcp.data)); |
| 1135 | ram_offset += sizeof(u32); |
| 1136 | /* The PLCP is 6 bytes long, but we only wrote 4 bytes, yet. |
| 1137 | * So leave the first two bytes of the next write blank. |
| 1138 | */ |
| 1139 | tmp = (u32) (data[0]) << 16; |
| 1140 | tmp |= (u32) (data[1]) << 24; |
| 1141 | b43_ram_write(dev, ram_offset, tmp); |
| 1142 | ram_offset += sizeof(u32); |
| 1143 | for (i = 2; i < size; i += sizeof(u32)) { |
| 1144 | tmp = (u32) (data[i + 0]); |
| 1145 | if (i + 1 < size) |
| 1146 | tmp |= (u32) (data[i + 1]) << 8; |
| 1147 | if (i + 2 < size) |
| 1148 | tmp |= (u32) (data[i + 2]) << 16; |
| 1149 | if (i + 3 < size) |
| 1150 | tmp |= (u32) (data[i + 3]) << 24; |
| 1151 | b43_ram_write(dev, ram_offset + i - 2, tmp); |
| 1152 | } |
| 1153 | b43_shm_write16(dev, B43_SHM_SHARED, shm_size_offset, |
| 1154 | size + sizeof(struct b43_plcp_hdr6)); |
| 1155 | } |
| 1156 | |
| 1157 | static void b43_write_beacon_template(struct b43_wldev *dev, |
| 1158 | u16 ram_offset, |
| 1159 | u16 shm_size_offset, u8 rate) |
| 1160 | { |
| 1161 | int len; |
| 1162 | const u8 *data; |
| 1163 | |
| 1164 | B43_WARN_ON(!dev->cached_beacon); |
| 1165 | len = min((size_t) dev->cached_beacon->len, |
| 1166 | 0x200 - sizeof(struct b43_plcp_hdr6)); |
| 1167 | data = (const u8 *)(dev->cached_beacon->data); |
| 1168 | b43_write_template_common(dev, data, |
| 1169 | len, ram_offset, shm_size_offset, rate); |
| 1170 | } |
| 1171 | |
| 1172 | static void b43_write_probe_resp_plcp(struct b43_wldev *dev, |
| 1173 | u16 shm_offset, u16 size, u8 rate) |
| 1174 | { |
| 1175 | struct b43_plcp_hdr4 plcp; |
| 1176 | u32 tmp; |
| 1177 | __le16 dur; |
| 1178 | |
| 1179 | plcp.data = 0; |
| 1180 | b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate); |
| 1181 | dur = ieee80211_generic_frame_duration(dev->wl->hw, |
| 1182 | dev->wl->if_id, size, |
| 1183 | B43_RATE_TO_BASE100KBPS(rate)); |
| 1184 | /* Write PLCP in two parts and timing for packet transfer */ |
| 1185 | tmp = le32_to_cpu(plcp.data); |
| 1186 | b43_shm_write16(dev, B43_SHM_SHARED, shm_offset, tmp & 0xFFFF); |
| 1187 | b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + 2, tmp >> 16); |
| 1188 | b43_shm_write16(dev, B43_SHM_SHARED, shm_offset + 6, le16_to_cpu(dur)); |
| 1189 | } |
| 1190 | |
| 1191 | /* Instead of using custom probe response template, this function |
| 1192 | * just patches custom beacon template by: |
| 1193 | * 1) Changing packet type |
| 1194 | * 2) Patching duration field |
| 1195 | * 3) Stripping TIM |
| 1196 | */ |
| 1197 | static u8 *b43_generate_probe_resp(struct b43_wldev *dev, |
| 1198 | u16 * dest_size, u8 rate) |
| 1199 | { |
| 1200 | const u8 *src_data; |
| 1201 | u8 *dest_data; |
| 1202 | u16 src_size, elem_size, src_pos, dest_pos; |
| 1203 | __le16 dur; |
| 1204 | struct ieee80211_hdr *hdr; |
| 1205 | |
| 1206 | B43_WARN_ON(!dev->cached_beacon); |
| 1207 | src_size = dev->cached_beacon->len; |
| 1208 | src_data = (const u8 *)dev->cached_beacon->data; |
| 1209 | |
| 1210 | if (unlikely(src_size < 0x24)) { |
| 1211 | b43dbg(dev->wl, "b43_generate_probe_resp: " "invalid beacon\n"); |
| 1212 | return NULL; |
| 1213 | } |
| 1214 | |
| 1215 | dest_data = kmalloc(src_size, GFP_ATOMIC); |
| 1216 | if (unlikely(!dest_data)) |
| 1217 | return NULL; |
| 1218 | |
| 1219 | /* 0x24 is offset of first variable-len Information-Element |
| 1220 | * in beacon frame. |
| 1221 | */ |
| 1222 | memcpy(dest_data, src_data, 0x24); |
| 1223 | src_pos = dest_pos = 0x24; |
| 1224 | for (; src_pos < src_size - 2; src_pos += elem_size) { |
| 1225 | elem_size = src_data[src_pos + 1] + 2; |
| 1226 | if (src_data[src_pos] != 0x05) { /* TIM */ |
| 1227 | memcpy(dest_data + dest_pos, src_data + src_pos, |
| 1228 | elem_size); |
| 1229 | dest_pos += elem_size; |
| 1230 | } |
| 1231 | } |
| 1232 | *dest_size = dest_pos; |
| 1233 | hdr = (struct ieee80211_hdr *)dest_data; |
| 1234 | |
| 1235 | /* Set the frame control. */ |
| 1236 | hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | |
| 1237 | IEEE80211_STYPE_PROBE_RESP); |
| 1238 | dur = ieee80211_generic_frame_duration(dev->wl->hw, |
| 1239 | dev->wl->if_id, *dest_size, |
| 1240 | B43_RATE_TO_BASE100KBPS(rate)); |
| 1241 | hdr->duration_id = dur; |
| 1242 | |
| 1243 | return dest_data; |
| 1244 | } |
| 1245 | |
| 1246 | static void b43_write_probe_resp_template(struct b43_wldev *dev, |
| 1247 | u16 ram_offset, |
| 1248 | u16 shm_size_offset, u8 rate) |
| 1249 | { |
| 1250 | u8 *probe_resp_data; |
| 1251 | u16 size; |
| 1252 | |
| 1253 | B43_WARN_ON(!dev->cached_beacon); |
| 1254 | size = dev->cached_beacon->len; |
| 1255 | probe_resp_data = b43_generate_probe_resp(dev, &size, rate); |
| 1256 | if (unlikely(!probe_resp_data)) |
| 1257 | return; |
| 1258 | |
| 1259 | /* Looks like PLCP headers plus packet timings are stored for |
| 1260 | * all possible basic rates |
| 1261 | */ |
| 1262 | b43_write_probe_resp_plcp(dev, 0x31A, size, B43_CCK_RATE_1MB); |
| 1263 | b43_write_probe_resp_plcp(dev, 0x32C, size, B43_CCK_RATE_2MB); |
| 1264 | b43_write_probe_resp_plcp(dev, 0x33E, size, B43_CCK_RATE_5MB); |
| 1265 | b43_write_probe_resp_plcp(dev, 0x350, size, B43_CCK_RATE_11MB); |
| 1266 | |
| 1267 | size = min((size_t) size, 0x200 - sizeof(struct b43_plcp_hdr6)); |
| 1268 | b43_write_template_common(dev, probe_resp_data, |
| 1269 | size, ram_offset, shm_size_offset, rate); |
| 1270 | kfree(probe_resp_data); |
| 1271 | } |
| 1272 | |
| 1273 | static int b43_refresh_cached_beacon(struct b43_wldev *dev, |
| 1274 | struct sk_buff *beacon) |
| 1275 | { |
| 1276 | if (dev->cached_beacon) |
| 1277 | kfree_skb(dev->cached_beacon); |
| 1278 | dev->cached_beacon = beacon; |
| 1279 | |
| 1280 | return 0; |
| 1281 | } |
| 1282 | |
| 1283 | static void b43_update_templates(struct b43_wldev *dev) |
| 1284 | { |
| 1285 | u32 status; |
| 1286 | |
| 1287 | B43_WARN_ON(!dev->cached_beacon); |
| 1288 | |
| 1289 | b43_write_beacon_template(dev, 0x68, 0x18, B43_CCK_RATE_1MB); |
| 1290 | b43_write_beacon_template(dev, 0x468, 0x1A, B43_CCK_RATE_1MB); |
| 1291 | b43_write_probe_resp_template(dev, 0x268, 0x4A, B43_CCK_RATE_11MB); |
| 1292 | |
| 1293 | status = b43_read32(dev, B43_MMIO_STATUS2_BITFIELD); |
| 1294 | status |= 0x03; |
| 1295 | b43_write32(dev, B43_MMIO_STATUS2_BITFIELD, status); |
| 1296 | } |
| 1297 | |
| 1298 | static void b43_refresh_templates(struct b43_wldev *dev, struct sk_buff *beacon) |
| 1299 | { |
| 1300 | int err; |
| 1301 | |
| 1302 | err = b43_refresh_cached_beacon(dev, beacon); |
| 1303 | if (unlikely(err)) |
| 1304 | return; |
| 1305 | b43_update_templates(dev); |
| 1306 | } |
| 1307 | |
| 1308 | static void b43_set_ssid(struct b43_wldev *dev, const u8 * ssid, u8 ssid_len) |
| 1309 | { |
| 1310 | u32 tmp; |
| 1311 | u16 i, len; |
| 1312 | |
| 1313 | len = min((u16) ssid_len, (u16) 0x100); |
| 1314 | for (i = 0; i < len; i += sizeof(u32)) { |
| 1315 | tmp = (u32) (ssid[i + 0]); |
| 1316 | if (i + 1 < len) |
| 1317 | tmp |= (u32) (ssid[i + 1]) << 8; |
| 1318 | if (i + 2 < len) |
| 1319 | tmp |= (u32) (ssid[i + 2]) << 16; |
| 1320 | if (i + 3 < len) |
| 1321 | tmp |= (u32) (ssid[i + 3]) << 24; |
| 1322 | b43_shm_write32(dev, B43_SHM_SHARED, 0x380 + i, tmp); |
| 1323 | } |
| 1324 | b43_shm_write16(dev, B43_SHM_SHARED, 0x48, len); |
| 1325 | } |
| 1326 | |
| 1327 | static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int) |
| 1328 | { |
| 1329 | b43_time_lock(dev); |
| 1330 | if (dev->dev->id.revision >= 3) { |
| 1331 | b43_write32(dev, 0x188, (beacon_int << 16)); |
| 1332 | } else { |
| 1333 | b43_write16(dev, 0x606, (beacon_int >> 6)); |
| 1334 | b43_write16(dev, 0x610, beacon_int); |
| 1335 | } |
| 1336 | b43_time_unlock(dev); |
| 1337 | } |
| 1338 | |
| 1339 | static void handle_irq_beacon(struct b43_wldev *dev) |
| 1340 | { |
| 1341 | u32 status; |
| 1342 | |
| 1343 | if (!b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) |
| 1344 | return; |
| 1345 | |
| 1346 | dev->irq_savedstate &= ~B43_IRQ_BEACON; |
| 1347 | status = b43_read32(dev, B43_MMIO_STATUS2_BITFIELD); |
| 1348 | |
| 1349 | if (!dev->cached_beacon || ((status & 0x1) && (status & 0x2))) { |
| 1350 | /* ACK beacon IRQ. */ |
| 1351 | b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_BEACON); |
| 1352 | dev->irq_savedstate |= B43_IRQ_BEACON; |
| 1353 | if (dev->cached_beacon) |
| 1354 | kfree_skb(dev->cached_beacon); |
| 1355 | dev->cached_beacon = NULL; |
| 1356 | return; |
| 1357 | } |
| 1358 | if (!(status & 0x1)) { |
| 1359 | b43_write_beacon_template(dev, 0x68, 0x18, B43_CCK_RATE_1MB); |
| 1360 | status |= 0x1; |
| 1361 | b43_write32(dev, B43_MMIO_STATUS2_BITFIELD, status); |
| 1362 | } |
| 1363 | if (!(status & 0x2)) { |
| 1364 | b43_write_beacon_template(dev, 0x468, 0x1A, B43_CCK_RATE_1MB); |
| 1365 | status |= 0x2; |
| 1366 | b43_write32(dev, B43_MMIO_STATUS2_BITFIELD, status); |
| 1367 | } |
| 1368 | } |
| 1369 | |
| 1370 | static void handle_irq_ucode_debug(struct b43_wldev *dev) |
| 1371 | { |
| 1372 | //TODO |
| 1373 | } |
| 1374 | |
| 1375 | /* Interrupt handler bottom-half */ |
| 1376 | static void b43_interrupt_tasklet(struct b43_wldev *dev) |
| 1377 | { |
| 1378 | u32 reason; |
| 1379 | u32 dma_reason[ARRAY_SIZE(dev->dma_reason)]; |
| 1380 | u32 merged_dma_reason = 0; |
Michael Buesch | 21954c3 | 2007-09-27 15:31:40 +0200 | [diff] [blame] | 1381 | int i; |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 1382 | unsigned long flags; |
| 1383 | |
| 1384 | spin_lock_irqsave(&dev->wl->irq_lock, flags); |
| 1385 | |
| 1386 | B43_WARN_ON(b43_status(dev) != B43_STAT_STARTED); |
| 1387 | |
| 1388 | reason = dev->irq_reason; |
| 1389 | for (i = 0; i < ARRAY_SIZE(dma_reason); i++) { |
| 1390 | dma_reason[i] = dev->dma_reason[i]; |
| 1391 | merged_dma_reason |= dma_reason[i]; |
| 1392 | } |
| 1393 | |
| 1394 | if (unlikely(reason & B43_IRQ_MAC_TXERR)) |
| 1395 | b43err(dev->wl, "MAC transmission error\n"); |
| 1396 | |
| 1397 | if (unlikely(reason & B43_IRQ_PHY_TXERR)) |
| 1398 | b43err(dev->wl, "PHY transmission error\n"); |
| 1399 | |
| 1400 | if (unlikely(merged_dma_reason & (B43_DMAIRQ_FATALMASK | |
| 1401 | B43_DMAIRQ_NONFATALMASK))) { |
| 1402 | if (merged_dma_reason & B43_DMAIRQ_FATALMASK) { |
| 1403 | b43err(dev->wl, "Fatal DMA error: " |
| 1404 | "0x%08X, 0x%08X, 0x%08X, " |
| 1405 | "0x%08X, 0x%08X, 0x%08X\n", |
| 1406 | dma_reason[0], dma_reason[1], |
| 1407 | dma_reason[2], dma_reason[3], |
| 1408 | dma_reason[4], dma_reason[5]); |
| 1409 | b43_controller_restart(dev, "DMA error"); |
| 1410 | mmiowb(); |
| 1411 | spin_unlock_irqrestore(&dev->wl->irq_lock, flags); |
| 1412 | return; |
| 1413 | } |
| 1414 | if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) { |
| 1415 | b43err(dev->wl, "DMA error: " |
| 1416 | "0x%08X, 0x%08X, 0x%08X, " |
| 1417 | "0x%08X, 0x%08X, 0x%08X\n", |
| 1418 | dma_reason[0], dma_reason[1], |
| 1419 | dma_reason[2], dma_reason[3], |
| 1420 | dma_reason[4], dma_reason[5]); |
| 1421 | } |
| 1422 | } |
| 1423 | |
| 1424 | if (unlikely(reason & B43_IRQ_UCODE_DEBUG)) |
| 1425 | handle_irq_ucode_debug(dev); |
| 1426 | if (reason & B43_IRQ_TBTT_INDI) |
| 1427 | handle_irq_tbtt_indication(dev); |
| 1428 | if (reason & B43_IRQ_ATIM_END) |
| 1429 | handle_irq_atim_end(dev); |
| 1430 | if (reason & B43_IRQ_BEACON) |
| 1431 | handle_irq_beacon(dev); |
| 1432 | if (reason & B43_IRQ_PMQ) |
| 1433 | handle_irq_pmq(dev); |
Michael Buesch | 21954c3 | 2007-09-27 15:31:40 +0200 | [diff] [blame] | 1434 | if (reason & B43_IRQ_TXFIFO_FLUSH_OK) |
| 1435 | ;/* TODO */ |
| 1436 | if (reason & B43_IRQ_NOISESAMPLE_OK) |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 1437 | handle_irq_noise(dev); |
| 1438 | |
| 1439 | /* Check the DMA reason registers for received data. */ |
| 1440 | if (dma_reason[0] & B43_DMAIRQ_RX_DONE) { |
| 1441 | if (b43_using_pio(dev)) |
| 1442 | b43_pio_rx(dev->pio.queue0); |
| 1443 | else |
| 1444 | b43_dma_rx(dev->dma.rx_ring0); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 1445 | } |
| 1446 | B43_WARN_ON(dma_reason[1] & B43_DMAIRQ_RX_DONE); |
| 1447 | B43_WARN_ON(dma_reason[2] & B43_DMAIRQ_RX_DONE); |
| 1448 | if (dma_reason[3] & B43_DMAIRQ_RX_DONE) { |
| 1449 | if (b43_using_pio(dev)) |
| 1450 | b43_pio_rx(dev->pio.queue3); |
| 1451 | else |
| 1452 | b43_dma_rx(dev->dma.rx_ring3); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 1453 | } |
| 1454 | B43_WARN_ON(dma_reason[4] & B43_DMAIRQ_RX_DONE); |
| 1455 | B43_WARN_ON(dma_reason[5] & B43_DMAIRQ_RX_DONE); |
| 1456 | |
Michael Buesch | 21954c3 | 2007-09-27 15:31:40 +0200 | [diff] [blame] | 1457 | if (reason & B43_IRQ_TX_OK) |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 1458 | handle_irq_transmit_status(dev); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 1459 | |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 1460 | b43_interrupt_enable(dev, dev->irq_savedstate); |
| 1461 | mmiowb(); |
| 1462 | spin_unlock_irqrestore(&dev->wl->irq_lock, flags); |
| 1463 | } |
| 1464 | |
| 1465 | static void pio_irq_workaround(struct b43_wldev *dev, u16 base, int queueidx) |
| 1466 | { |
| 1467 | u16 rxctl; |
| 1468 | |
| 1469 | rxctl = b43_read16(dev, base + B43_PIO_RXCTL); |
| 1470 | if (rxctl & B43_PIO_RXCTL_DATAAVAILABLE) |
| 1471 | dev->dma_reason[queueidx] |= B43_DMAIRQ_RX_DONE; |
| 1472 | else |
| 1473 | dev->dma_reason[queueidx] &= ~B43_DMAIRQ_RX_DONE; |
| 1474 | } |
| 1475 | |
| 1476 | static void b43_interrupt_ack(struct b43_wldev *dev, u32 reason) |
| 1477 | { |
| 1478 | if (b43_using_pio(dev) && |
| 1479 | (dev->dev->id.revision < 3) && |
| 1480 | (!(reason & B43_IRQ_PIO_WORKAROUND))) { |
| 1481 | /* Apply a PIO specific workaround to the dma_reasons */ |
| 1482 | pio_irq_workaround(dev, B43_MMIO_PIO1_BASE, 0); |
| 1483 | pio_irq_workaround(dev, B43_MMIO_PIO2_BASE, 1); |
| 1484 | pio_irq_workaround(dev, B43_MMIO_PIO3_BASE, 2); |
| 1485 | pio_irq_workaround(dev, B43_MMIO_PIO4_BASE, 3); |
| 1486 | } |
| 1487 | |
| 1488 | b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, reason); |
| 1489 | |
| 1490 | b43_write32(dev, B43_MMIO_DMA0_REASON, dev->dma_reason[0]); |
| 1491 | b43_write32(dev, B43_MMIO_DMA1_REASON, dev->dma_reason[1]); |
| 1492 | b43_write32(dev, B43_MMIO_DMA2_REASON, dev->dma_reason[2]); |
| 1493 | b43_write32(dev, B43_MMIO_DMA3_REASON, dev->dma_reason[3]); |
| 1494 | b43_write32(dev, B43_MMIO_DMA4_REASON, dev->dma_reason[4]); |
| 1495 | b43_write32(dev, B43_MMIO_DMA5_REASON, dev->dma_reason[5]); |
| 1496 | } |
| 1497 | |
| 1498 | /* Interrupt handler top-half */ |
| 1499 | static irqreturn_t b43_interrupt_handler(int irq, void *dev_id) |
| 1500 | { |
| 1501 | irqreturn_t ret = IRQ_NONE; |
| 1502 | struct b43_wldev *dev = dev_id; |
| 1503 | u32 reason; |
| 1504 | |
| 1505 | if (!dev) |
| 1506 | return IRQ_NONE; |
| 1507 | |
| 1508 | spin_lock(&dev->wl->irq_lock); |
| 1509 | |
| 1510 | if (b43_status(dev) < B43_STAT_STARTED) |
| 1511 | goto out; |
| 1512 | reason = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); |
| 1513 | if (reason == 0xffffffff) /* shared IRQ */ |
| 1514 | goto out; |
| 1515 | ret = IRQ_HANDLED; |
| 1516 | reason &= b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); |
| 1517 | if (!reason) |
| 1518 | goto out; |
| 1519 | |
| 1520 | dev->dma_reason[0] = b43_read32(dev, B43_MMIO_DMA0_REASON) |
| 1521 | & 0x0001DC00; |
| 1522 | dev->dma_reason[1] = b43_read32(dev, B43_MMIO_DMA1_REASON) |
| 1523 | & 0x0000DC00; |
| 1524 | dev->dma_reason[2] = b43_read32(dev, B43_MMIO_DMA2_REASON) |
| 1525 | & 0x0000DC00; |
| 1526 | dev->dma_reason[3] = b43_read32(dev, B43_MMIO_DMA3_REASON) |
| 1527 | & 0x0001DC00; |
| 1528 | dev->dma_reason[4] = b43_read32(dev, B43_MMIO_DMA4_REASON) |
| 1529 | & 0x0000DC00; |
| 1530 | dev->dma_reason[5] = b43_read32(dev, B43_MMIO_DMA5_REASON) |
| 1531 | & 0x0000DC00; |
| 1532 | |
| 1533 | b43_interrupt_ack(dev, reason); |
| 1534 | /* disable all IRQs. They are enabled again in the bottom half. */ |
| 1535 | dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL); |
| 1536 | /* save the reason code and call our bottom half. */ |
| 1537 | dev->irq_reason = reason; |
| 1538 | tasklet_schedule(&dev->isr_tasklet); |
| 1539 | out: |
| 1540 | mmiowb(); |
| 1541 | spin_unlock(&dev->wl->irq_lock); |
| 1542 | |
| 1543 | return ret; |
| 1544 | } |
| 1545 | |
| 1546 | static void b43_release_firmware(struct b43_wldev *dev) |
| 1547 | { |
| 1548 | release_firmware(dev->fw.ucode); |
| 1549 | dev->fw.ucode = NULL; |
| 1550 | release_firmware(dev->fw.pcm); |
| 1551 | dev->fw.pcm = NULL; |
| 1552 | release_firmware(dev->fw.initvals); |
| 1553 | dev->fw.initvals = NULL; |
| 1554 | release_firmware(dev->fw.initvals_band); |
| 1555 | dev->fw.initvals_band = NULL; |
| 1556 | } |
| 1557 | |
| 1558 | static void b43_print_fw_helptext(struct b43_wl *wl) |
| 1559 | { |
| 1560 | b43err(wl, "You must go to " |
Stefano Brivio | 354807e | 2007-11-19 20:21:31 +0100 | [diff] [blame] | 1561 | "http://linuxwireless.org/en/users/Drivers/b43#devicefirmware " |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 1562 | "and download the correct firmware (version 4).\n"); |
| 1563 | } |
| 1564 | |
| 1565 | static int do_request_fw(struct b43_wldev *dev, |
| 1566 | const char *name, |
| 1567 | const struct firmware **fw) |
| 1568 | { |
Michael Buesch | 1a09404 | 2007-09-20 11:13:40 -0700 | [diff] [blame] | 1569 | char path[sizeof(modparam_fwpostfix) + 32]; |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 1570 | struct b43_fw_header *hdr; |
| 1571 | u32 size; |
| 1572 | int err; |
| 1573 | |
| 1574 | if (!name) |
| 1575 | return 0; |
| 1576 | |
| 1577 | snprintf(path, ARRAY_SIZE(path), |
| 1578 | "b43%s/%s.fw", |
| 1579 | modparam_fwpostfix, name); |
| 1580 | err = request_firmware(fw, path, dev->dev->dev); |
| 1581 | if (err) { |
| 1582 | b43err(dev->wl, "Firmware file \"%s\" not found " |
| 1583 | "or load failed.\n", path); |
| 1584 | return err; |
| 1585 | } |
| 1586 | if ((*fw)->size < sizeof(struct b43_fw_header)) |
| 1587 | goto err_format; |
| 1588 | hdr = (struct b43_fw_header *)((*fw)->data); |
| 1589 | switch (hdr->type) { |
| 1590 | case B43_FW_TYPE_UCODE: |
| 1591 | case B43_FW_TYPE_PCM: |
| 1592 | size = be32_to_cpu(hdr->size); |
| 1593 | if (size != (*fw)->size - sizeof(struct b43_fw_header)) |
| 1594 | goto err_format; |
| 1595 | /* fallthrough */ |
| 1596 | case B43_FW_TYPE_IV: |
| 1597 | if (hdr->ver != 1) |
| 1598 | goto err_format; |
| 1599 | break; |
| 1600 | default: |
| 1601 | goto err_format; |
| 1602 | } |
| 1603 | |
| 1604 | return err; |
| 1605 | |
| 1606 | err_format: |
| 1607 | b43err(dev->wl, "Firmware file \"%s\" format error.\n", path); |
| 1608 | return -EPROTO; |
| 1609 | } |
| 1610 | |
| 1611 | static int b43_request_firmware(struct b43_wldev *dev) |
| 1612 | { |
| 1613 | struct b43_firmware *fw = &dev->fw; |
| 1614 | const u8 rev = dev->dev->id.revision; |
| 1615 | const char *filename; |
| 1616 | u32 tmshigh; |
| 1617 | int err; |
| 1618 | |
| 1619 | tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH); |
| 1620 | if (!fw->ucode) { |
| 1621 | if ((rev >= 5) && (rev <= 10)) |
| 1622 | filename = "ucode5"; |
| 1623 | else if ((rev >= 11) && (rev <= 12)) |
| 1624 | filename = "ucode11"; |
| 1625 | else if (rev >= 13) |
| 1626 | filename = "ucode13"; |
| 1627 | else |
| 1628 | goto err_no_ucode; |
| 1629 | err = do_request_fw(dev, filename, &fw->ucode); |
| 1630 | if (err) |
| 1631 | goto err_load; |
| 1632 | } |
| 1633 | if (!fw->pcm) { |
| 1634 | if ((rev >= 5) && (rev <= 10)) |
| 1635 | filename = "pcm5"; |
| 1636 | else if (rev >= 11) |
| 1637 | filename = NULL; |
| 1638 | else |
| 1639 | goto err_no_pcm; |
| 1640 | err = do_request_fw(dev, filename, &fw->pcm); |
| 1641 | if (err) |
| 1642 | goto err_load; |
| 1643 | } |
| 1644 | if (!fw->initvals) { |
| 1645 | switch (dev->phy.type) { |
| 1646 | case B43_PHYTYPE_A: |
| 1647 | if ((rev >= 5) && (rev <= 10)) { |
| 1648 | if (tmshigh & B43_TMSHIGH_GPHY) |
| 1649 | filename = "a0g1initvals5"; |
| 1650 | else |
| 1651 | filename = "a0g0initvals5"; |
| 1652 | } else |
| 1653 | goto err_no_initvals; |
| 1654 | break; |
| 1655 | case B43_PHYTYPE_G: |
| 1656 | if ((rev >= 5) && (rev <= 10)) |
| 1657 | filename = "b0g0initvals5"; |
| 1658 | else if (rev >= 13) |
| 1659 | filename = "lp0initvals13"; |
| 1660 | else |
| 1661 | goto err_no_initvals; |
| 1662 | break; |
| 1663 | default: |
| 1664 | goto err_no_initvals; |
| 1665 | } |
| 1666 | err = do_request_fw(dev, filename, &fw->initvals); |
| 1667 | if (err) |
| 1668 | goto err_load; |
| 1669 | } |
| 1670 | if (!fw->initvals_band) { |
| 1671 | switch (dev->phy.type) { |
| 1672 | case B43_PHYTYPE_A: |
| 1673 | if ((rev >= 5) && (rev <= 10)) { |
| 1674 | if (tmshigh & B43_TMSHIGH_GPHY) |
| 1675 | filename = "a0g1bsinitvals5"; |
| 1676 | else |
| 1677 | filename = "a0g0bsinitvals5"; |
| 1678 | } else if (rev >= 11) |
| 1679 | filename = NULL; |
| 1680 | else |
| 1681 | goto err_no_initvals; |
| 1682 | break; |
| 1683 | case B43_PHYTYPE_G: |
| 1684 | if ((rev >= 5) && (rev <= 10)) |
| 1685 | filename = "b0g0bsinitvals5"; |
| 1686 | else if (rev >= 11) |
| 1687 | filename = NULL; |
| 1688 | else |
| 1689 | goto err_no_initvals; |
| 1690 | break; |
| 1691 | default: |
| 1692 | goto err_no_initvals; |
| 1693 | } |
| 1694 | err = do_request_fw(dev, filename, &fw->initvals_band); |
| 1695 | if (err) |
| 1696 | goto err_load; |
| 1697 | } |
| 1698 | |
| 1699 | return 0; |
| 1700 | |
| 1701 | err_load: |
| 1702 | b43_print_fw_helptext(dev->wl); |
| 1703 | goto error; |
| 1704 | |
| 1705 | err_no_ucode: |
| 1706 | err = -ENODEV; |
| 1707 | b43err(dev->wl, "No microcode available for core rev %u\n", rev); |
| 1708 | goto error; |
| 1709 | |
| 1710 | err_no_pcm: |
| 1711 | err = -ENODEV; |
| 1712 | b43err(dev->wl, "No PCM available for core rev %u\n", rev); |
| 1713 | goto error; |
| 1714 | |
| 1715 | err_no_initvals: |
| 1716 | err = -ENODEV; |
| 1717 | b43err(dev->wl, "No Initial Values firmware file for PHY %u, " |
| 1718 | "core rev %u\n", dev->phy.type, rev); |
| 1719 | goto error; |
| 1720 | |
| 1721 | error: |
| 1722 | b43_release_firmware(dev); |
| 1723 | return err; |
| 1724 | } |
| 1725 | |
| 1726 | static int b43_upload_microcode(struct b43_wldev *dev) |
| 1727 | { |
| 1728 | const size_t hdr_len = sizeof(struct b43_fw_header); |
| 1729 | const __be32 *data; |
| 1730 | unsigned int i, len; |
| 1731 | u16 fwrev, fwpatch, fwdate, fwtime; |
| 1732 | u32 tmp; |
| 1733 | int err = 0; |
| 1734 | |
| 1735 | /* Upload Microcode. */ |
| 1736 | data = (__be32 *) (dev->fw.ucode->data + hdr_len); |
| 1737 | len = (dev->fw.ucode->size - hdr_len) / sizeof(__be32); |
| 1738 | b43_shm_control_word(dev, B43_SHM_UCODE | B43_SHM_AUTOINC_W, 0x0000); |
| 1739 | for (i = 0; i < len; i++) { |
| 1740 | b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i])); |
| 1741 | udelay(10); |
| 1742 | } |
| 1743 | |
| 1744 | if (dev->fw.pcm) { |
| 1745 | /* Upload PCM data. */ |
| 1746 | data = (__be32 *) (dev->fw.pcm->data + hdr_len); |
| 1747 | len = (dev->fw.pcm->size - hdr_len) / sizeof(__be32); |
| 1748 | b43_shm_control_word(dev, B43_SHM_HW, 0x01EA); |
| 1749 | b43_write32(dev, B43_MMIO_SHM_DATA, 0x00004000); |
| 1750 | /* No need for autoinc bit in SHM_HW */ |
| 1751 | b43_shm_control_word(dev, B43_SHM_HW, 0x01EB); |
| 1752 | for (i = 0; i < len; i++) { |
| 1753 | b43_write32(dev, B43_MMIO_SHM_DATA, be32_to_cpu(data[i])); |
| 1754 | udelay(10); |
| 1755 | } |
| 1756 | } |
| 1757 | |
| 1758 | b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, B43_IRQ_ALL); |
| 1759 | b43_write32(dev, B43_MMIO_MACCTL, |
| 1760 | B43_MACCTL_PSM_RUN | |
| 1761 | B43_MACCTL_IHR_ENABLED | B43_MACCTL_INFRA); |
| 1762 | |
| 1763 | /* Wait for the microcode to load and respond */ |
| 1764 | i = 0; |
| 1765 | while (1) { |
| 1766 | tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); |
| 1767 | if (tmp == B43_IRQ_MAC_SUSPENDED) |
| 1768 | break; |
| 1769 | i++; |
| 1770 | if (i >= 50) { |
| 1771 | b43err(dev->wl, "Microcode not responding\n"); |
| 1772 | b43_print_fw_helptext(dev->wl); |
| 1773 | err = -ENODEV; |
| 1774 | goto out; |
| 1775 | } |
| 1776 | udelay(10); |
| 1777 | } |
| 1778 | b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); /* dummy read */ |
| 1779 | |
| 1780 | /* Get and check the revisions. */ |
| 1781 | fwrev = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEREV); |
| 1782 | fwpatch = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEPATCH); |
| 1783 | fwdate = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODEDATE); |
| 1784 | fwtime = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_UCODETIME); |
| 1785 | |
| 1786 | if (fwrev <= 0x128) { |
| 1787 | b43err(dev->wl, "YOUR FIRMWARE IS TOO OLD. Firmware from " |
| 1788 | "binary drivers older than version 4.x is unsupported. " |
| 1789 | "You must upgrade your firmware files.\n"); |
| 1790 | b43_print_fw_helptext(dev->wl); |
| 1791 | b43_write32(dev, B43_MMIO_MACCTL, 0); |
| 1792 | err = -EOPNOTSUPP; |
| 1793 | goto out; |
| 1794 | } |
| 1795 | b43dbg(dev->wl, "Loading firmware version %u.%u " |
| 1796 | "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n", |
| 1797 | fwrev, fwpatch, |
| 1798 | (fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF, |
| 1799 | (fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F, fwtime & 0x1F); |
| 1800 | |
| 1801 | dev->fw.rev = fwrev; |
| 1802 | dev->fw.patch = fwpatch; |
| 1803 | |
| 1804 | out: |
| 1805 | return err; |
| 1806 | } |
| 1807 | |
| 1808 | static int b43_write_initvals(struct b43_wldev *dev, |
| 1809 | const struct b43_iv *ivals, |
| 1810 | size_t count, |
| 1811 | size_t array_size) |
| 1812 | { |
| 1813 | const struct b43_iv *iv; |
| 1814 | u16 offset; |
| 1815 | size_t i; |
| 1816 | bool bit32; |
| 1817 | |
| 1818 | BUILD_BUG_ON(sizeof(struct b43_iv) != 6); |
| 1819 | iv = ivals; |
| 1820 | for (i = 0; i < count; i++) { |
| 1821 | if (array_size < sizeof(iv->offset_size)) |
| 1822 | goto err_format; |
| 1823 | array_size -= sizeof(iv->offset_size); |
| 1824 | offset = be16_to_cpu(iv->offset_size); |
| 1825 | bit32 = !!(offset & B43_IV_32BIT); |
| 1826 | offset &= B43_IV_OFFSET_MASK; |
| 1827 | if (offset >= 0x1000) |
| 1828 | goto err_format; |
| 1829 | if (bit32) { |
| 1830 | u32 value; |
| 1831 | |
| 1832 | if (array_size < sizeof(iv->data.d32)) |
| 1833 | goto err_format; |
| 1834 | array_size -= sizeof(iv->data.d32); |
| 1835 | |
| 1836 | value = be32_to_cpu(get_unaligned(&iv->data.d32)); |
| 1837 | b43_write32(dev, offset, value); |
| 1838 | |
| 1839 | iv = (const struct b43_iv *)((const uint8_t *)iv + |
| 1840 | sizeof(__be16) + |
| 1841 | sizeof(__be32)); |
| 1842 | } else { |
| 1843 | u16 value; |
| 1844 | |
| 1845 | if (array_size < sizeof(iv->data.d16)) |
| 1846 | goto err_format; |
| 1847 | array_size -= sizeof(iv->data.d16); |
| 1848 | |
| 1849 | value = be16_to_cpu(iv->data.d16); |
| 1850 | b43_write16(dev, offset, value); |
| 1851 | |
| 1852 | iv = (const struct b43_iv *)((const uint8_t *)iv + |
| 1853 | sizeof(__be16) + |
| 1854 | sizeof(__be16)); |
| 1855 | } |
| 1856 | } |
| 1857 | if (array_size) |
| 1858 | goto err_format; |
| 1859 | |
| 1860 | return 0; |
| 1861 | |
| 1862 | err_format: |
| 1863 | b43err(dev->wl, "Initial Values Firmware file-format error.\n"); |
| 1864 | b43_print_fw_helptext(dev->wl); |
| 1865 | |
| 1866 | return -EPROTO; |
| 1867 | } |
| 1868 | |
| 1869 | static int b43_upload_initvals(struct b43_wldev *dev) |
| 1870 | { |
| 1871 | const size_t hdr_len = sizeof(struct b43_fw_header); |
| 1872 | const struct b43_fw_header *hdr; |
| 1873 | struct b43_firmware *fw = &dev->fw; |
| 1874 | const struct b43_iv *ivals; |
| 1875 | size_t count; |
| 1876 | int err; |
| 1877 | |
| 1878 | hdr = (const struct b43_fw_header *)(fw->initvals->data); |
| 1879 | ivals = (const struct b43_iv *)(fw->initvals->data + hdr_len); |
| 1880 | count = be32_to_cpu(hdr->size); |
| 1881 | err = b43_write_initvals(dev, ivals, count, |
| 1882 | fw->initvals->size - hdr_len); |
| 1883 | if (err) |
| 1884 | goto out; |
| 1885 | if (fw->initvals_band) { |
| 1886 | hdr = (const struct b43_fw_header *)(fw->initvals_band->data); |
| 1887 | ivals = (const struct b43_iv *)(fw->initvals_band->data + hdr_len); |
| 1888 | count = be32_to_cpu(hdr->size); |
| 1889 | err = b43_write_initvals(dev, ivals, count, |
| 1890 | fw->initvals_band->size - hdr_len); |
| 1891 | if (err) |
| 1892 | goto out; |
| 1893 | } |
| 1894 | out: |
| 1895 | |
| 1896 | return err; |
| 1897 | } |
| 1898 | |
| 1899 | /* Initialize the GPIOs |
| 1900 | * http://bcm-specs.sipsolutions.net/GPIO |
| 1901 | */ |
| 1902 | static int b43_gpio_init(struct b43_wldev *dev) |
| 1903 | { |
| 1904 | struct ssb_bus *bus = dev->dev->bus; |
| 1905 | struct ssb_device *gpiodev, *pcidev = NULL; |
| 1906 | u32 mask, set; |
| 1907 | |
| 1908 | b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL) |
| 1909 | & ~B43_MACCTL_GPOUTSMSK); |
| 1910 | |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 1911 | b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK) |
| 1912 | | 0x000F); |
| 1913 | |
| 1914 | mask = 0x0000001F; |
| 1915 | set = 0x0000000F; |
| 1916 | if (dev->dev->bus->chip_id == 0x4301) { |
| 1917 | mask |= 0x0060; |
| 1918 | set |= 0x0060; |
| 1919 | } |
| 1920 | if (0 /* FIXME: conditional unknown */ ) { |
| 1921 | b43_write16(dev, B43_MMIO_GPIO_MASK, |
| 1922 | b43_read16(dev, B43_MMIO_GPIO_MASK) |
| 1923 | | 0x0100); |
| 1924 | mask |= 0x0180; |
| 1925 | set |= 0x0180; |
| 1926 | } |
| 1927 | if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_PACTRL) { |
| 1928 | b43_write16(dev, B43_MMIO_GPIO_MASK, |
| 1929 | b43_read16(dev, B43_MMIO_GPIO_MASK) |
| 1930 | | 0x0200); |
| 1931 | mask |= 0x0200; |
| 1932 | set |= 0x0200; |
| 1933 | } |
| 1934 | if (dev->dev->id.revision >= 2) |
| 1935 | mask |= 0x0010; /* FIXME: This is redundant. */ |
| 1936 | |
| 1937 | #ifdef CONFIG_SSB_DRIVER_PCICORE |
| 1938 | pcidev = bus->pcicore.dev; |
| 1939 | #endif |
| 1940 | gpiodev = bus->chipco.dev ? : pcidev; |
| 1941 | if (!gpiodev) |
| 1942 | return 0; |
| 1943 | ssb_write32(gpiodev, B43_GPIO_CONTROL, |
| 1944 | (ssb_read32(gpiodev, B43_GPIO_CONTROL) |
| 1945 | & mask) | set); |
| 1946 | |
| 1947 | return 0; |
| 1948 | } |
| 1949 | |
| 1950 | /* Turn off all GPIO stuff. Call this on module unload, for example. */ |
| 1951 | static void b43_gpio_cleanup(struct b43_wldev *dev) |
| 1952 | { |
| 1953 | struct ssb_bus *bus = dev->dev->bus; |
| 1954 | struct ssb_device *gpiodev, *pcidev = NULL; |
| 1955 | |
| 1956 | #ifdef CONFIG_SSB_DRIVER_PCICORE |
| 1957 | pcidev = bus->pcicore.dev; |
| 1958 | #endif |
| 1959 | gpiodev = bus->chipco.dev ? : pcidev; |
| 1960 | if (!gpiodev) |
| 1961 | return; |
| 1962 | ssb_write32(gpiodev, B43_GPIO_CONTROL, 0); |
| 1963 | } |
| 1964 | |
| 1965 | /* http://bcm-specs.sipsolutions.net/EnableMac */ |
| 1966 | void b43_mac_enable(struct b43_wldev *dev) |
| 1967 | { |
| 1968 | dev->mac_suspended--; |
| 1969 | B43_WARN_ON(dev->mac_suspended < 0); |
Michael Buesch | 05b64b3 | 2007-09-28 16:19:03 +0200 | [diff] [blame] | 1970 | B43_WARN_ON(irqs_disabled()); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 1971 | if (dev->mac_suspended == 0) { |
| 1972 | b43_write32(dev, B43_MMIO_MACCTL, |
| 1973 | b43_read32(dev, B43_MMIO_MACCTL) |
| 1974 | | B43_MACCTL_ENABLED); |
| 1975 | b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, |
| 1976 | B43_IRQ_MAC_SUSPENDED); |
| 1977 | /* Commit writes */ |
| 1978 | b43_read32(dev, B43_MMIO_MACCTL); |
| 1979 | b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); |
| 1980 | b43_power_saving_ctl_bits(dev, 0); |
Michael Buesch | 05b64b3 | 2007-09-28 16:19:03 +0200 | [diff] [blame] | 1981 | |
| 1982 | /* Re-enable IRQs. */ |
| 1983 | spin_lock_irq(&dev->wl->irq_lock); |
| 1984 | b43_interrupt_enable(dev, dev->irq_savedstate); |
| 1985 | spin_unlock_irq(&dev->wl->irq_lock); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 1986 | } |
| 1987 | } |
| 1988 | |
| 1989 | /* http://bcm-specs.sipsolutions.net/SuspendMAC */ |
| 1990 | void b43_mac_suspend(struct b43_wldev *dev) |
| 1991 | { |
| 1992 | int i; |
| 1993 | u32 tmp; |
| 1994 | |
Michael Buesch | 05b64b3 | 2007-09-28 16:19:03 +0200 | [diff] [blame] | 1995 | might_sleep(); |
| 1996 | B43_WARN_ON(irqs_disabled()); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 1997 | B43_WARN_ON(dev->mac_suspended < 0); |
Michael Buesch | 05b64b3 | 2007-09-28 16:19:03 +0200 | [diff] [blame] | 1998 | |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 1999 | if (dev->mac_suspended == 0) { |
Michael Buesch | 05b64b3 | 2007-09-28 16:19:03 +0200 | [diff] [blame] | 2000 | /* Mask IRQs before suspending MAC. Otherwise |
| 2001 | * the MAC stays busy and won't suspend. */ |
| 2002 | spin_lock_irq(&dev->wl->irq_lock); |
| 2003 | tmp = b43_interrupt_disable(dev, B43_IRQ_ALL); |
| 2004 | spin_unlock_irq(&dev->wl->irq_lock); |
| 2005 | b43_synchronize_irq(dev); |
| 2006 | dev->irq_savedstate = tmp; |
| 2007 | |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2008 | b43_power_saving_ctl_bits(dev, B43_PS_AWAKE); |
| 2009 | b43_write32(dev, B43_MMIO_MACCTL, |
| 2010 | b43_read32(dev, B43_MMIO_MACCTL) |
| 2011 | & ~B43_MACCTL_ENABLED); |
| 2012 | /* force pci to flush the write */ |
| 2013 | b43_read32(dev, B43_MMIO_MACCTL); |
Michael Buesch | 05b64b3 | 2007-09-28 16:19:03 +0200 | [diff] [blame] | 2014 | for (i = 40; i; i--) { |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2015 | tmp = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); |
| 2016 | if (tmp & B43_IRQ_MAC_SUSPENDED) |
| 2017 | goto out; |
Michael Buesch | 05b64b3 | 2007-09-28 16:19:03 +0200 | [diff] [blame] | 2018 | msleep(1); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2019 | } |
| 2020 | b43err(dev->wl, "MAC suspend failed\n"); |
| 2021 | } |
Michael Buesch | 05b64b3 | 2007-09-28 16:19:03 +0200 | [diff] [blame] | 2022 | out: |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2023 | dev->mac_suspended++; |
| 2024 | } |
| 2025 | |
| 2026 | static void b43_adjust_opmode(struct b43_wldev *dev) |
| 2027 | { |
| 2028 | struct b43_wl *wl = dev->wl; |
| 2029 | u32 ctl; |
| 2030 | u16 cfp_pretbtt; |
| 2031 | |
| 2032 | ctl = b43_read32(dev, B43_MMIO_MACCTL); |
| 2033 | /* Reset status to STA infrastructure mode. */ |
| 2034 | ctl &= ~B43_MACCTL_AP; |
| 2035 | ctl &= ~B43_MACCTL_KEEP_CTL; |
| 2036 | ctl &= ~B43_MACCTL_KEEP_BADPLCP; |
| 2037 | ctl &= ~B43_MACCTL_KEEP_BAD; |
| 2038 | ctl &= ~B43_MACCTL_PROMISC; |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 2039 | ctl &= ~B43_MACCTL_BEACPROMISC; |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2040 | ctl |= B43_MACCTL_INFRA; |
| 2041 | |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 2042 | if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP)) |
| 2043 | ctl |= B43_MACCTL_AP; |
| 2044 | else if (b43_is_mode(wl, IEEE80211_IF_TYPE_IBSS)) |
| 2045 | ctl &= ~B43_MACCTL_INFRA; |
| 2046 | |
| 2047 | if (wl->filter_flags & FIF_CONTROL) |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2048 | ctl |= B43_MACCTL_KEEP_CTL; |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 2049 | if (wl->filter_flags & FIF_FCSFAIL) |
| 2050 | ctl |= B43_MACCTL_KEEP_BAD; |
| 2051 | if (wl->filter_flags & FIF_PLCPFAIL) |
| 2052 | ctl |= B43_MACCTL_KEEP_BADPLCP; |
| 2053 | if (wl->filter_flags & FIF_PROMISC_IN_BSS) |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2054 | ctl |= B43_MACCTL_PROMISC; |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 2055 | if (wl->filter_flags & FIF_BCN_PRBRESP_PROMISC) |
| 2056 | ctl |= B43_MACCTL_BEACPROMISC; |
| 2057 | |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2058 | /* Workaround: On old hardware the HW-MAC-address-filter |
| 2059 | * doesn't work properly, so always run promisc in filter |
| 2060 | * it in software. */ |
| 2061 | if (dev->dev->id.revision <= 4) |
| 2062 | ctl |= B43_MACCTL_PROMISC; |
| 2063 | |
| 2064 | b43_write32(dev, B43_MMIO_MACCTL, ctl); |
| 2065 | |
| 2066 | cfp_pretbtt = 2; |
| 2067 | if ((ctl & B43_MACCTL_INFRA) && !(ctl & B43_MACCTL_AP)) { |
| 2068 | if (dev->dev->bus->chip_id == 0x4306 && |
| 2069 | dev->dev->bus->chip_rev == 3) |
| 2070 | cfp_pretbtt = 100; |
| 2071 | else |
| 2072 | cfp_pretbtt = 50; |
| 2073 | } |
| 2074 | b43_write16(dev, 0x612, cfp_pretbtt); |
| 2075 | } |
| 2076 | |
| 2077 | static void b43_rate_memory_write(struct b43_wldev *dev, u16 rate, int is_ofdm) |
| 2078 | { |
| 2079 | u16 offset; |
| 2080 | |
| 2081 | if (is_ofdm) { |
| 2082 | offset = 0x480; |
| 2083 | offset += (b43_plcp_get_ratecode_ofdm(rate) & 0x000F) * 2; |
| 2084 | } else { |
| 2085 | offset = 0x4C0; |
| 2086 | offset += (b43_plcp_get_ratecode_cck(rate) & 0x000F) * 2; |
| 2087 | } |
| 2088 | b43_shm_write16(dev, B43_SHM_SHARED, offset + 0x20, |
| 2089 | b43_shm_read16(dev, B43_SHM_SHARED, offset)); |
| 2090 | } |
| 2091 | |
| 2092 | static void b43_rate_memory_init(struct b43_wldev *dev) |
| 2093 | { |
| 2094 | switch (dev->phy.type) { |
| 2095 | case B43_PHYTYPE_A: |
| 2096 | case B43_PHYTYPE_G: |
| 2097 | b43_rate_memory_write(dev, B43_OFDM_RATE_6MB, 1); |
| 2098 | b43_rate_memory_write(dev, B43_OFDM_RATE_12MB, 1); |
| 2099 | b43_rate_memory_write(dev, B43_OFDM_RATE_18MB, 1); |
| 2100 | b43_rate_memory_write(dev, B43_OFDM_RATE_24MB, 1); |
| 2101 | b43_rate_memory_write(dev, B43_OFDM_RATE_36MB, 1); |
| 2102 | b43_rate_memory_write(dev, B43_OFDM_RATE_48MB, 1); |
| 2103 | b43_rate_memory_write(dev, B43_OFDM_RATE_54MB, 1); |
| 2104 | if (dev->phy.type == B43_PHYTYPE_A) |
| 2105 | break; |
| 2106 | /* fallthrough */ |
| 2107 | case B43_PHYTYPE_B: |
| 2108 | b43_rate_memory_write(dev, B43_CCK_RATE_1MB, 0); |
| 2109 | b43_rate_memory_write(dev, B43_CCK_RATE_2MB, 0); |
| 2110 | b43_rate_memory_write(dev, B43_CCK_RATE_5MB, 0); |
| 2111 | b43_rate_memory_write(dev, B43_CCK_RATE_11MB, 0); |
| 2112 | break; |
| 2113 | default: |
| 2114 | B43_WARN_ON(1); |
| 2115 | } |
| 2116 | } |
| 2117 | |
| 2118 | /* Set the TX-Antenna for management frames sent by firmware. */ |
| 2119 | static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna) |
| 2120 | { |
| 2121 | u16 ant = 0; |
| 2122 | u16 tmp; |
| 2123 | |
| 2124 | switch (antenna) { |
| 2125 | case B43_ANTENNA0: |
| 2126 | ant |= B43_TX4_PHY_ANT0; |
| 2127 | break; |
| 2128 | case B43_ANTENNA1: |
| 2129 | ant |= B43_TX4_PHY_ANT1; |
| 2130 | break; |
| 2131 | case B43_ANTENNA_AUTO: |
| 2132 | ant |= B43_TX4_PHY_ANTLAST; |
| 2133 | break; |
| 2134 | default: |
| 2135 | B43_WARN_ON(1); |
| 2136 | } |
| 2137 | |
| 2138 | /* FIXME We also need to set the other flags of the PHY control field somewhere. */ |
| 2139 | |
| 2140 | /* For Beacons */ |
| 2141 | tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL); |
| 2142 | tmp = (tmp & ~B43_TX4_PHY_ANT) | ant; |
| 2143 | b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL, tmp); |
| 2144 | /* For ACK/CTS */ |
| 2145 | tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL); |
| 2146 | tmp = (tmp & ~B43_TX4_PHY_ANT) | ant; |
| 2147 | b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_ACKCTSPHYCTL, tmp); |
| 2148 | /* For Probe Resposes */ |
| 2149 | tmp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL); |
| 2150 | tmp = (tmp & ~B43_TX4_PHY_ANT) | ant; |
| 2151 | b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, tmp); |
| 2152 | } |
| 2153 | |
| 2154 | /* This is the opposite of b43_chip_init() */ |
| 2155 | static void b43_chip_exit(struct b43_wldev *dev) |
| 2156 | { |
Michael Buesch | 8e9f752 | 2007-09-27 21:35:34 +0200 | [diff] [blame] | 2157 | b43_radio_turn_off(dev, 1); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2158 | b43_gpio_cleanup(dev); |
| 2159 | /* firmware is released later */ |
| 2160 | } |
| 2161 | |
| 2162 | /* Initialize the chip |
| 2163 | * http://bcm-specs.sipsolutions.net/ChipInit |
| 2164 | */ |
| 2165 | static int b43_chip_init(struct b43_wldev *dev) |
| 2166 | { |
| 2167 | struct b43_phy *phy = &dev->phy; |
| 2168 | int err, tmp; |
| 2169 | u32 value32; |
| 2170 | u16 value16; |
| 2171 | |
| 2172 | b43_write32(dev, B43_MMIO_MACCTL, |
| 2173 | B43_MACCTL_PSM_JMP0 | B43_MACCTL_IHR_ENABLED); |
| 2174 | |
| 2175 | err = b43_request_firmware(dev); |
| 2176 | if (err) |
| 2177 | goto out; |
| 2178 | err = b43_upload_microcode(dev); |
| 2179 | if (err) |
| 2180 | goto out; /* firmware is released later */ |
| 2181 | |
| 2182 | err = b43_gpio_init(dev); |
| 2183 | if (err) |
| 2184 | goto out; /* firmware is released later */ |
Michael Buesch | 21954c3 | 2007-09-27 15:31:40 +0200 | [diff] [blame] | 2185 | |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2186 | err = b43_upload_initvals(dev); |
| 2187 | if (err) |
Larry Finger | 1a8d122 | 2007-12-14 13:59:11 +0100 | [diff] [blame] | 2188 | goto err_gpio_clean; |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2189 | b43_radio_turn_on(dev); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2190 | |
| 2191 | b43_write16(dev, 0x03E6, 0x0000); |
| 2192 | err = b43_phy_init(dev); |
| 2193 | if (err) |
| 2194 | goto err_radio_off; |
| 2195 | |
| 2196 | /* Select initial Interference Mitigation. */ |
| 2197 | tmp = phy->interfmode; |
| 2198 | phy->interfmode = B43_INTERFMODE_NONE; |
| 2199 | b43_radio_set_interference_mitigation(dev, tmp); |
| 2200 | |
| 2201 | b43_set_rx_antenna(dev, B43_ANTENNA_DEFAULT); |
| 2202 | b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT); |
| 2203 | |
| 2204 | if (phy->type == B43_PHYTYPE_B) { |
| 2205 | value16 = b43_read16(dev, 0x005E); |
| 2206 | value16 |= 0x0004; |
| 2207 | b43_write16(dev, 0x005E, value16); |
| 2208 | } |
| 2209 | b43_write32(dev, 0x0100, 0x01000000); |
| 2210 | if (dev->dev->id.revision < 5) |
| 2211 | b43_write32(dev, 0x010C, 0x01000000); |
| 2212 | |
| 2213 | b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL) |
| 2214 | & ~B43_MACCTL_INFRA); |
| 2215 | b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL) |
| 2216 | | B43_MACCTL_INFRA); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2217 | |
| 2218 | if (b43_using_pio(dev)) { |
| 2219 | b43_write32(dev, 0x0210, 0x00000100); |
| 2220 | b43_write32(dev, 0x0230, 0x00000100); |
| 2221 | b43_write32(dev, 0x0250, 0x00000100); |
| 2222 | b43_write32(dev, 0x0270, 0x00000100); |
| 2223 | b43_shm_write16(dev, B43_SHM_SHARED, 0x0034, 0x0000); |
| 2224 | } |
| 2225 | |
| 2226 | /* Probe Response Timeout value */ |
| 2227 | /* FIXME: Default to 0, has to be set by ioctl probably... :-/ */ |
| 2228 | b43_shm_write16(dev, B43_SHM_SHARED, 0x0074, 0x0000); |
| 2229 | |
| 2230 | /* Initially set the wireless operation mode. */ |
| 2231 | b43_adjust_opmode(dev); |
| 2232 | |
| 2233 | if (dev->dev->id.revision < 3) { |
| 2234 | b43_write16(dev, 0x060E, 0x0000); |
| 2235 | b43_write16(dev, 0x0610, 0x8000); |
| 2236 | b43_write16(dev, 0x0604, 0x0000); |
| 2237 | b43_write16(dev, 0x0606, 0x0200); |
| 2238 | } else { |
| 2239 | b43_write32(dev, 0x0188, 0x80000000); |
| 2240 | b43_write32(dev, 0x018C, 0x02000000); |
| 2241 | } |
| 2242 | b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, 0x00004000); |
| 2243 | b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001DC00); |
| 2244 | b43_write32(dev, B43_MMIO_DMA1_IRQ_MASK, 0x0000DC00); |
| 2245 | b43_write32(dev, B43_MMIO_DMA2_IRQ_MASK, 0x0000DC00); |
| 2246 | b43_write32(dev, B43_MMIO_DMA3_IRQ_MASK, 0x0001DC00); |
| 2247 | b43_write32(dev, B43_MMIO_DMA4_IRQ_MASK, 0x0000DC00); |
| 2248 | b43_write32(dev, B43_MMIO_DMA5_IRQ_MASK, 0x0000DC00); |
| 2249 | |
| 2250 | value32 = ssb_read32(dev->dev, SSB_TMSLOW); |
| 2251 | value32 |= 0x00100000; |
| 2252 | ssb_write32(dev->dev, SSB_TMSLOW, value32); |
| 2253 | |
| 2254 | b43_write16(dev, B43_MMIO_POWERUP_DELAY, |
| 2255 | dev->dev->bus->chipco.fast_pwrup_delay); |
| 2256 | |
| 2257 | err = 0; |
| 2258 | b43dbg(dev->wl, "Chip initialized\n"); |
Michael Buesch | 21954c3 | 2007-09-27 15:31:40 +0200 | [diff] [blame] | 2259 | out: |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2260 | return err; |
| 2261 | |
Michael Buesch | 21954c3 | 2007-09-27 15:31:40 +0200 | [diff] [blame] | 2262 | err_radio_off: |
Michael Buesch | 8e9f752 | 2007-09-27 21:35:34 +0200 | [diff] [blame] | 2263 | b43_radio_turn_off(dev, 1); |
Larry Finger | 1a8d122 | 2007-12-14 13:59:11 +0100 | [diff] [blame] | 2264 | err_gpio_clean: |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2265 | b43_gpio_cleanup(dev); |
Michael Buesch | 21954c3 | 2007-09-27 15:31:40 +0200 | [diff] [blame] | 2266 | return err; |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2267 | } |
| 2268 | |
| 2269 | static void b43_periodic_every120sec(struct b43_wldev *dev) |
| 2270 | { |
| 2271 | struct b43_phy *phy = &dev->phy; |
| 2272 | |
| 2273 | if (phy->type != B43_PHYTYPE_G || phy->rev < 2) |
| 2274 | return; |
| 2275 | |
| 2276 | b43_mac_suspend(dev); |
| 2277 | b43_lo_g_measure(dev); |
| 2278 | b43_mac_enable(dev); |
| 2279 | if (b43_has_hardware_pctl(phy)) |
| 2280 | b43_lo_g_ctl_mark_all_unused(dev); |
| 2281 | } |
| 2282 | |
| 2283 | static void b43_periodic_every60sec(struct b43_wldev *dev) |
| 2284 | { |
| 2285 | struct b43_phy *phy = &dev->phy; |
| 2286 | |
| 2287 | if (!b43_has_hardware_pctl(phy)) |
| 2288 | b43_lo_g_ctl_mark_all_unused(dev); |
| 2289 | if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_RSSI) { |
| 2290 | b43_mac_suspend(dev); |
| 2291 | b43_calc_nrssi_slope(dev); |
| 2292 | if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 8)) { |
| 2293 | u8 old_chan = phy->channel; |
| 2294 | |
| 2295 | /* VCO Calibration */ |
| 2296 | if (old_chan >= 8) |
| 2297 | b43_radio_selectchannel(dev, 1, 0); |
| 2298 | else |
| 2299 | b43_radio_selectchannel(dev, 13, 0); |
| 2300 | b43_radio_selectchannel(dev, old_chan, 0); |
| 2301 | } |
| 2302 | b43_mac_enable(dev); |
| 2303 | } |
| 2304 | } |
| 2305 | |
| 2306 | static void b43_periodic_every30sec(struct b43_wldev *dev) |
| 2307 | { |
| 2308 | /* Update device statistics. */ |
| 2309 | b43_calculate_link_quality(dev); |
| 2310 | } |
| 2311 | |
| 2312 | static void b43_periodic_every15sec(struct b43_wldev *dev) |
| 2313 | { |
| 2314 | struct b43_phy *phy = &dev->phy; |
| 2315 | |
| 2316 | if (phy->type == B43_PHYTYPE_G) { |
| 2317 | //TODO: update_aci_moving_average |
| 2318 | if (phy->aci_enable && phy->aci_wlan_automatic) { |
| 2319 | b43_mac_suspend(dev); |
| 2320 | if (!phy->aci_enable && 1 /*TODO: not scanning? */ ) { |
| 2321 | if (0 /*TODO: bunch of conditions */ ) { |
| 2322 | b43_radio_set_interference_mitigation |
| 2323 | (dev, B43_INTERFMODE_MANUALWLAN); |
| 2324 | } |
| 2325 | } else if (1 /*TODO*/) { |
| 2326 | /* |
| 2327 | if ((aci_average > 1000) && !(b43_radio_aci_scan(dev))) { |
| 2328 | b43_radio_set_interference_mitigation(dev, |
| 2329 | B43_INTERFMODE_NONE); |
| 2330 | } |
| 2331 | */ |
| 2332 | } |
| 2333 | b43_mac_enable(dev); |
| 2334 | } else if (phy->interfmode == B43_INTERFMODE_NONWLAN && |
| 2335 | phy->rev == 1) { |
| 2336 | //TODO: implement rev1 workaround |
| 2337 | } |
| 2338 | } |
| 2339 | b43_phy_xmitpower(dev); //FIXME: unless scanning? |
| 2340 | //TODO for APHY (temperature?) |
| 2341 | } |
| 2342 | |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2343 | static void do_periodic_work(struct b43_wldev *dev) |
| 2344 | { |
| 2345 | unsigned int state; |
| 2346 | |
| 2347 | state = dev->periodic_state; |
Michael Buesch | 42bb4cd | 2007-09-28 14:22:33 +0200 | [diff] [blame] | 2348 | if (state % 8 == 0) |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2349 | b43_periodic_every120sec(dev); |
Michael Buesch | 42bb4cd | 2007-09-28 14:22:33 +0200 | [diff] [blame] | 2350 | if (state % 4 == 0) |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2351 | b43_periodic_every60sec(dev); |
Michael Buesch | 42bb4cd | 2007-09-28 14:22:33 +0200 | [diff] [blame] | 2352 | if (state % 2 == 0) |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2353 | b43_periodic_every30sec(dev); |
Michael Buesch | 42bb4cd | 2007-09-28 14:22:33 +0200 | [diff] [blame] | 2354 | b43_periodic_every15sec(dev); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2355 | } |
| 2356 | |
Michael Buesch | 05b64b3 | 2007-09-28 16:19:03 +0200 | [diff] [blame] | 2357 | /* Periodic work locking policy: |
| 2358 | * The whole periodic work handler is protected by |
| 2359 | * wl->mutex. If another lock is needed somewhere in the |
| 2360 | * pwork callchain, it's aquired in-place, where it's needed. |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2361 | */ |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2362 | static void b43_periodic_work_handler(struct work_struct *work) |
| 2363 | { |
Michael Buesch | 05b64b3 | 2007-09-28 16:19:03 +0200 | [diff] [blame] | 2364 | struct b43_wldev *dev = container_of(work, struct b43_wldev, |
| 2365 | periodic_work.work); |
| 2366 | struct b43_wl *wl = dev->wl; |
| 2367 | unsigned long delay; |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2368 | |
Michael Buesch | 05b64b3 | 2007-09-28 16:19:03 +0200 | [diff] [blame] | 2369 | mutex_lock(&wl->mutex); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2370 | |
| 2371 | if (unlikely(b43_status(dev) != B43_STAT_STARTED)) |
| 2372 | goto out; |
| 2373 | if (b43_debug(dev, B43_DBG_PWORK_STOP)) |
| 2374 | goto out_requeue; |
| 2375 | |
Michael Buesch | 05b64b3 | 2007-09-28 16:19:03 +0200 | [diff] [blame] | 2376 | do_periodic_work(dev); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2377 | |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2378 | dev->periodic_state++; |
Michael Buesch | 42bb4cd | 2007-09-28 14:22:33 +0200 | [diff] [blame] | 2379 | out_requeue: |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2380 | if (b43_debug(dev, B43_DBG_PWORK_FAST)) |
| 2381 | delay = msecs_to_jiffies(50); |
| 2382 | else |
Anton Blanchard | 82cd682 | 2007-10-15 00:42:23 -0500 | [diff] [blame] | 2383 | delay = round_jiffies_relative(HZ * 15); |
Michael Buesch | 05b64b3 | 2007-09-28 16:19:03 +0200 | [diff] [blame] | 2384 | queue_delayed_work(wl->hw->workqueue, &dev->periodic_work, delay); |
Michael Buesch | 42bb4cd | 2007-09-28 14:22:33 +0200 | [diff] [blame] | 2385 | out: |
Michael Buesch | 05b64b3 | 2007-09-28 16:19:03 +0200 | [diff] [blame] | 2386 | mutex_unlock(&wl->mutex); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2387 | } |
| 2388 | |
| 2389 | static void b43_periodic_tasks_setup(struct b43_wldev *dev) |
| 2390 | { |
| 2391 | struct delayed_work *work = &dev->periodic_work; |
| 2392 | |
| 2393 | dev->periodic_state = 0; |
| 2394 | INIT_DELAYED_WORK(work, b43_periodic_work_handler); |
| 2395 | queue_delayed_work(dev->wl->hw->workqueue, work, 0); |
| 2396 | } |
| 2397 | |
| 2398 | /* Validate access to the chip (SHM) */ |
| 2399 | static int b43_validate_chipaccess(struct b43_wldev *dev) |
| 2400 | { |
| 2401 | u32 value; |
| 2402 | u32 shm_backup; |
| 2403 | |
| 2404 | shm_backup = b43_shm_read32(dev, B43_SHM_SHARED, 0); |
| 2405 | b43_shm_write32(dev, B43_SHM_SHARED, 0, 0xAA5555AA); |
| 2406 | if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0xAA5555AA) |
| 2407 | goto error; |
| 2408 | b43_shm_write32(dev, B43_SHM_SHARED, 0, 0x55AAAA55); |
| 2409 | if (b43_shm_read32(dev, B43_SHM_SHARED, 0) != 0x55AAAA55) |
| 2410 | goto error; |
| 2411 | b43_shm_write32(dev, B43_SHM_SHARED, 0, shm_backup); |
| 2412 | |
| 2413 | value = b43_read32(dev, B43_MMIO_MACCTL); |
| 2414 | if ((value | B43_MACCTL_GMODE) != |
| 2415 | (B43_MACCTL_GMODE | B43_MACCTL_IHR_ENABLED)) |
| 2416 | goto error; |
| 2417 | |
| 2418 | value = b43_read32(dev, B43_MMIO_GEN_IRQ_REASON); |
| 2419 | if (value) |
| 2420 | goto error; |
| 2421 | |
| 2422 | return 0; |
| 2423 | error: |
| 2424 | b43err(dev->wl, "Failed to validate the chipaccess\n"); |
| 2425 | return -ENODEV; |
| 2426 | } |
| 2427 | |
| 2428 | static void b43_security_init(struct b43_wldev *dev) |
| 2429 | { |
| 2430 | dev->max_nr_keys = (dev->dev->id.revision >= 5) ? 58 : 20; |
| 2431 | B43_WARN_ON(dev->max_nr_keys > ARRAY_SIZE(dev->key)); |
| 2432 | dev->ktp = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_KTP); |
| 2433 | /* KTP is a word address, but we address SHM bytewise. |
| 2434 | * So multiply by two. |
| 2435 | */ |
| 2436 | dev->ktp *= 2; |
| 2437 | if (dev->dev->id.revision >= 5) { |
| 2438 | /* Number of RCMTA address slots */ |
| 2439 | b43_write16(dev, B43_MMIO_RCMTA_COUNT, dev->max_nr_keys - 8); |
| 2440 | } |
| 2441 | b43_clear_keys(dev); |
| 2442 | } |
| 2443 | |
| 2444 | static int b43_rng_read(struct hwrng *rng, u32 * data) |
| 2445 | { |
| 2446 | struct b43_wl *wl = (struct b43_wl *)rng->priv; |
| 2447 | unsigned long flags; |
| 2448 | |
| 2449 | /* Don't take wl->mutex here, as it could deadlock with |
| 2450 | * hwrng internal locking. It's not needed to take |
| 2451 | * wl->mutex here, anyway. */ |
| 2452 | |
| 2453 | spin_lock_irqsave(&wl->irq_lock, flags); |
| 2454 | *data = b43_read16(wl->current_dev, B43_MMIO_RNG); |
| 2455 | spin_unlock_irqrestore(&wl->irq_lock, flags); |
| 2456 | |
| 2457 | return (sizeof(u16)); |
| 2458 | } |
| 2459 | |
| 2460 | static void b43_rng_exit(struct b43_wl *wl) |
| 2461 | { |
| 2462 | if (wl->rng_initialized) |
| 2463 | hwrng_unregister(&wl->rng); |
| 2464 | } |
| 2465 | |
| 2466 | static int b43_rng_init(struct b43_wl *wl) |
| 2467 | { |
| 2468 | int err; |
| 2469 | |
| 2470 | snprintf(wl->rng_name, ARRAY_SIZE(wl->rng_name), |
| 2471 | "%s_%s", KBUILD_MODNAME, wiphy_name(wl->hw->wiphy)); |
| 2472 | wl->rng.name = wl->rng_name; |
| 2473 | wl->rng.data_read = b43_rng_read; |
| 2474 | wl->rng.priv = (unsigned long)wl; |
| 2475 | wl->rng_initialized = 1; |
| 2476 | err = hwrng_register(&wl->rng); |
| 2477 | if (err) { |
| 2478 | wl->rng_initialized = 0; |
| 2479 | b43err(wl, "Failed to register the random " |
| 2480 | "number generator (%d)\n", err); |
| 2481 | } |
| 2482 | |
| 2483 | return err; |
| 2484 | } |
| 2485 | |
Michael Buesch | 40faacc | 2007-10-28 16:29:32 +0100 | [diff] [blame^] | 2486 | static int b43_op_tx(struct ieee80211_hw *hw, |
| 2487 | struct sk_buff *skb, |
| 2488 | struct ieee80211_tx_control *ctl) |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2489 | { |
| 2490 | struct b43_wl *wl = hw_to_b43_wl(hw); |
| 2491 | struct b43_wldev *dev = wl->current_dev; |
| 2492 | int err = -ENODEV; |
| 2493 | unsigned long flags; |
| 2494 | |
| 2495 | if (unlikely(!dev)) |
| 2496 | goto out; |
| 2497 | if (unlikely(b43_status(dev) < B43_STAT_STARTED)) |
| 2498 | goto out; |
| 2499 | /* DMA-TX is done without a global lock. */ |
| 2500 | if (b43_using_pio(dev)) { |
| 2501 | spin_lock_irqsave(&wl->irq_lock, flags); |
| 2502 | err = b43_pio_tx(dev, skb, ctl); |
| 2503 | spin_unlock_irqrestore(&wl->irq_lock, flags); |
| 2504 | } else |
| 2505 | err = b43_dma_tx(dev, skb, ctl); |
Michael Buesch | 40faacc | 2007-10-28 16:29:32 +0100 | [diff] [blame^] | 2506 | out: |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2507 | if (unlikely(err)) |
| 2508 | return NETDEV_TX_BUSY; |
| 2509 | return NETDEV_TX_OK; |
| 2510 | } |
| 2511 | |
Michael Buesch | 40faacc | 2007-10-28 16:29:32 +0100 | [diff] [blame^] | 2512 | static int b43_op_conf_tx(struct ieee80211_hw *hw, |
| 2513 | int queue, |
| 2514 | const struct ieee80211_tx_queue_params *params) |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2515 | { |
| 2516 | return 0; |
| 2517 | } |
| 2518 | |
Michael Buesch | 40faacc | 2007-10-28 16:29:32 +0100 | [diff] [blame^] | 2519 | static int b43_op_get_tx_stats(struct ieee80211_hw *hw, |
| 2520 | struct ieee80211_tx_queue_stats *stats) |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2521 | { |
| 2522 | struct b43_wl *wl = hw_to_b43_wl(hw); |
| 2523 | struct b43_wldev *dev = wl->current_dev; |
| 2524 | unsigned long flags; |
| 2525 | int err = -ENODEV; |
| 2526 | |
| 2527 | if (!dev) |
| 2528 | goto out; |
| 2529 | spin_lock_irqsave(&wl->irq_lock, flags); |
| 2530 | if (likely(b43_status(dev) >= B43_STAT_STARTED)) { |
| 2531 | if (b43_using_pio(dev)) |
| 2532 | b43_pio_get_tx_stats(dev, stats); |
| 2533 | else |
| 2534 | b43_dma_get_tx_stats(dev, stats); |
| 2535 | err = 0; |
| 2536 | } |
| 2537 | spin_unlock_irqrestore(&wl->irq_lock, flags); |
Michael Buesch | 40faacc | 2007-10-28 16:29:32 +0100 | [diff] [blame^] | 2538 | out: |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2539 | return err; |
| 2540 | } |
| 2541 | |
Michael Buesch | 40faacc | 2007-10-28 16:29:32 +0100 | [diff] [blame^] | 2542 | static int b43_op_get_stats(struct ieee80211_hw *hw, |
| 2543 | struct ieee80211_low_level_stats *stats) |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2544 | { |
| 2545 | struct b43_wl *wl = hw_to_b43_wl(hw); |
| 2546 | unsigned long flags; |
| 2547 | |
| 2548 | spin_lock_irqsave(&wl->irq_lock, flags); |
| 2549 | memcpy(stats, &wl->ieee_stats, sizeof(*stats)); |
| 2550 | spin_unlock_irqrestore(&wl->irq_lock, flags); |
| 2551 | |
| 2552 | return 0; |
| 2553 | } |
| 2554 | |
| 2555 | static const char *phymode_to_string(unsigned int phymode) |
| 2556 | { |
| 2557 | switch (phymode) { |
| 2558 | case B43_PHYMODE_A: |
| 2559 | return "A"; |
| 2560 | case B43_PHYMODE_B: |
| 2561 | return "B"; |
| 2562 | case B43_PHYMODE_G: |
| 2563 | return "G"; |
| 2564 | default: |
| 2565 | B43_WARN_ON(1); |
| 2566 | } |
| 2567 | return ""; |
| 2568 | } |
| 2569 | |
| 2570 | static int find_wldev_for_phymode(struct b43_wl *wl, |
| 2571 | unsigned int phymode, |
| 2572 | struct b43_wldev **dev, bool * gmode) |
| 2573 | { |
| 2574 | struct b43_wldev *d; |
| 2575 | |
| 2576 | list_for_each_entry(d, &wl->devlist, list) { |
| 2577 | if (d->phy.possible_phymodes & phymode) { |
| 2578 | /* Ok, this device supports the PHY-mode. |
| 2579 | * Now figure out how the gmode bit has to be |
| 2580 | * set to support it. */ |
| 2581 | if (phymode == B43_PHYMODE_A) |
| 2582 | *gmode = 0; |
| 2583 | else |
| 2584 | *gmode = 1; |
| 2585 | *dev = d; |
| 2586 | |
| 2587 | return 0; |
| 2588 | } |
| 2589 | } |
| 2590 | |
| 2591 | return -ESRCH; |
| 2592 | } |
| 2593 | |
| 2594 | static void b43_put_phy_into_reset(struct b43_wldev *dev) |
| 2595 | { |
| 2596 | struct ssb_device *sdev = dev->dev; |
| 2597 | u32 tmslow; |
| 2598 | |
| 2599 | tmslow = ssb_read32(sdev, SSB_TMSLOW); |
| 2600 | tmslow &= ~B43_TMSLOW_GMODE; |
| 2601 | tmslow |= B43_TMSLOW_PHYRESET; |
| 2602 | tmslow |= SSB_TMSLOW_FGC; |
| 2603 | ssb_write32(sdev, SSB_TMSLOW, tmslow); |
| 2604 | msleep(1); |
| 2605 | |
| 2606 | tmslow = ssb_read32(sdev, SSB_TMSLOW); |
| 2607 | tmslow &= ~SSB_TMSLOW_FGC; |
| 2608 | tmslow |= B43_TMSLOW_PHYRESET; |
| 2609 | ssb_write32(sdev, SSB_TMSLOW, tmslow); |
| 2610 | msleep(1); |
| 2611 | } |
| 2612 | |
| 2613 | /* Expects wl->mutex locked */ |
| 2614 | static int b43_switch_phymode(struct b43_wl *wl, unsigned int new_mode) |
| 2615 | { |
| 2616 | struct b43_wldev *up_dev; |
| 2617 | struct b43_wldev *down_dev; |
| 2618 | int err; |
| 2619 | bool gmode = 0; |
| 2620 | int prev_status; |
| 2621 | |
| 2622 | err = find_wldev_for_phymode(wl, new_mode, &up_dev, &gmode); |
| 2623 | if (err) { |
| 2624 | b43err(wl, "Could not find a device for %s-PHY mode\n", |
| 2625 | phymode_to_string(new_mode)); |
| 2626 | return err; |
| 2627 | } |
| 2628 | if ((up_dev == wl->current_dev) && |
| 2629 | (!!wl->current_dev->phy.gmode == !!gmode)) { |
| 2630 | /* This device is already running. */ |
| 2631 | return 0; |
| 2632 | } |
| 2633 | b43dbg(wl, "Reconfiguring PHYmode to %s-PHY\n", |
| 2634 | phymode_to_string(new_mode)); |
| 2635 | down_dev = wl->current_dev; |
| 2636 | |
| 2637 | prev_status = b43_status(down_dev); |
| 2638 | /* Shutdown the currently running core. */ |
| 2639 | if (prev_status >= B43_STAT_STARTED) |
| 2640 | b43_wireless_core_stop(down_dev); |
| 2641 | if (prev_status >= B43_STAT_INITIALIZED) |
| 2642 | b43_wireless_core_exit(down_dev); |
| 2643 | |
| 2644 | if (down_dev != up_dev) { |
| 2645 | /* We switch to a different core, so we put PHY into |
| 2646 | * RESET on the old core. */ |
| 2647 | b43_put_phy_into_reset(down_dev); |
| 2648 | } |
| 2649 | |
| 2650 | /* Now start the new core. */ |
| 2651 | up_dev->phy.gmode = gmode; |
| 2652 | if (prev_status >= B43_STAT_INITIALIZED) { |
| 2653 | err = b43_wireless_core_init(up_dev); |
| 2654 | if (err) { |
| 2655 | b43err(wl, "Fatal: Could not initialize device for " |
| 2656 | "newly selected %s-PHY mode\n", |
| 2657 | phymode_to_string(new_mode)); |
| 2658 | goto init_failure; |
| 2659 | } |
| 2660 | } |
| 2661 | if (prev_status >= B43_STAT_STARTED) { |
| 2662 | err = b43_wireless_core_start(up_dev); |
| 2663 | if (err) { |
| 2664 | b43err(wl, "Fatal: Coult not start device for " |
| 2665 | "newly selected %s-PHY mode\n", |
| 2666 | phymode_to_string(new_mode)); |
| 2667 | b43_wireless_core_exit(up_dev); |
| 2668 | goto init_failure; |
| 2669 | } |
| 2670 | } |
| 2671 | B43_WARN_ON(b43_status(up_dev) != prev_status); |
| 2672 | |
| 2673 | wl->current_dev = up_dev; |
| 2674 | |
| 2675 | return 0; |
| 2676 | init_failure: |
| 2677 | /* Whoops, failed to init the new core. No core is operating now. */ |
| 2678 | wl->current_dev = NULL; |
| 2679 | return err; |
| 2680 | } |
| 2681 | |
| 2682 | static int b43_antenna_from_ieee80211(u8 antenna) |
| 2683 | { |
| 2684 | switch (antenna) { |
| 2685 | case 0: /* default/diversity */ |
| 2686 | return B43_ANTENNA_DEFAULT; |
| 2687 | case 1: /* Antenna 0 */ |
| 2688 | return B43_ANTENNA0; |
| 2689 | case 2: /* Antenna 1 */ |
| 2690 | return B43_ANTENNA1; |
| 2691 | default: |
| 2692 | return B43_ANTENNA_DEFAULT; |
| 2693 | } |
| 2694 | } |
| 2695 | |
Michael Buesch | 40faacc | 2007-10-28 16:29:32 +0100 | [diff] [blame^] | 2696 | static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2697 | { |
| 2698 | struct b43_wl *wl = hw_to_b43_wl(hw); |
| 2699 | struct b43_wldev *dev; |
| 2700 | struct b43_phy *phy; |
| 2701 | unsigned long flags; |
| 2702 | unsigned int new_phymode = 0xFFFF; |
| 2703 | int antenna_tx; |
| 2704 | int antenna_rx; |
| 2705 | int err = 0; |
| 2706 | u32 savedirqs; |
| 2707 | |
| 2708 | antenna_tx = b43_antenna_from_ieee80211(conf->antenna_sel_tx); |
| 2709 | antenna_rx = b43_antenna_from_ieee80211(conf->antenna_sel_rx); |
| 2710 | |
| 2711 | mutex_lock(&wl->mutex); |
| 2712 | |
| 2713 | /* Switch the PHY mode (if necessary). */ |
| 2714 | switch (conf->phymode) { |
| 2715 | case MODE_IEEE80211A: |
| 2716 | new_phymode = B43_PHYMODE_A; |
| 2717 | break; |
| 2718 | case MODE_IEEE80211B: |
| 2719 | new_phymode = B43_PHYMODE_B; |
| 2720 | break; |
| 2721 | case MODE_IEEE80211G: |
| 2722 | new_phymode = B43_PHYMODE_G; |
| 2723 | break; |
| 2724 | default: |
| 2725 | B43_WARN_ON(1); |
| 2726 | } |
| 2727 | err = b43_switch_phymode(wl, new_phymode); |
| 2728 | if (err) |
| 2729 | goto out_unlock_mutex; |
| 2730 | dev = wl->current_dev; |
| 2731 | phy = &dev->phy; |
| 2732 | |
| 2733 | /* Disable IRQs while reconfiguring the device. |
| 2734 | * This makes it possible to drop the spinlock throughout |
| 2735 | * the reconfiguration process. */ |
| 2736 | spin_lock_irqsave(&wl->irq_lock, flags); |
| 2737 | if (b43_status(dev) < B43_STAT_STARTED) { |
| 2738 | spin_unlock_irqrestore(&wl->irq_lock, flags); |
| 2739 | goto out_unlock_mutex; |
| 2740 | } |
| 2741 | savedirqs = b43_interrupt_disable(dev, B43_IRQ_ALL); |
| 2742 | spin_unlock_irqrestore(&wl->irq_lock, flags); |
| 2743 | b43_synchronize_irq(dev); |
| 2744 | |
| 2745 | /* Switch to the requested channel. |
| 2746 | * The firmware takes care of races with the TX handler. */ |
| 2747 | if (conf->channel_val != phy->channel) |
| 2748 | b43_radio_selectchannel(dev, conf->channel_val, 0); |
| 2749 | |
| 2750 | /* Enable/Disable ShortSlot timing. */ |
| 2751 | if ((!!(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME)) != |
| 2752 | dev->short_slot) { |
| 2753 | B43_WARN_ON(phy->type != B43_PHYTYPE_G); |
| 2754 | if (conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) |
| 2755 | b43_short_slot_timing_enable(dev); |
| 2756 | else |
| 2757 | b43_short_slot_timing_disable(dev); |
| 2758 | } |
| 2759 | |
| 2760 | /* Adjust the desired TX power level. */ |
| 2761 | if (conf->power_level != 0) { |
| 2762 | if (conf->power_level != phy->power_level) { |
| 2763 | phy->power_level = conf->power_level; |
| 2764 | b43_phy_xmitpower(dev); |
| 2765 | } |
| 2766 | } |
| 2767 | |
| 2768 | /* Antennas for RX and management frame TX. */ |
| 2769 | b43_mgmtframe_txantenna(dev, antenna_tx); |
| 2770 | b43_set_rx_antenna(dev, antenna_rx); |
| 2771 | |
| 2772 | /* Update templates for AP mode. */ |
| 2773 | if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP)) |
| 2774 | b43_set_beacon_int(dev, conf->beacon_int); |
| 2775 | |
Michael Buesch | fda9abc | 2007-09-20 22:14:18 +0200 | [diff] [blame] | 2776 | if (!!conf->radio_enabled != phy->radio_on) { |
| 2777 | if (conf->radio_enabled) { |
| 2778 | b43_radio_turn_on(dev); |
| 2779 | b43info(dev->wl, "Radio turned on by software\n"); |
| 2780 | if (!dev->radio_hw_enable) { |
| 2781 | b43info(dev->wl, "The hardware RF-kill button " |
| 2782 | "still turns the radio physically off. " |
| 2783 | "Press the button to turn it on.\n"); |
| 2784 | } |
| 2785 | } else { |
Michael Buesch | 8e9f752 | 2007-09-27 21:35:34 +0200 | [diff] [blame] | 2786 | b43_radio_turn_off(dev, 0); |
Michael Buesch | fda9abc | 2007-09-20 22:14:18 +0200 | [diff] [blame] | 2787 | b43info(dev->wl, "Radio turned off by software\n"); |
| 2788 | } |
| 2789 | } |
| 2790 | |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2791 | spin_lock_irqsave(&wl->irq_lock, flags); |
| 2792 | b43_interrupt_enable(dev, savedirqs); |
| 2793 | mmiowb(); |
| 2794 | spin_unlock_irqrestore(&wl->irq_lock, flags); |
| 2795 | out_unlock_mutex: |
| 2796 | mutex_unlock(&wl->mutex); |
| 2797 | |
| 2798 | return err; |
| 2799 | } |
| 2800 | |
Michael Buesch | 40faacc | 2007-10-28 16:29:32 +0100 | [diff] [blame^] | 2801 | static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 2802 | const u8 *local_addr, const u8 *addr, |
| 2803 | struct ieee80211_key_conf *key) |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2804 | { |
| 2805 | struct b43_wl *wl = hw_to_b43_wl(hw); |
Michael Buesch | c6dfc9a | 2007-10-28 15:59:58 +0100 | [diff] [blame] | 2806 | struct b43_wldev *dev; |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2807 | unsigned long flags; |
| 2808 | u8 algorithm; |
| 2809 | u8 index; |
Michael Buesch | c6dfc9a | 2007-10-28 15:59:58 +0100 | [diff] [blame] | 2810 | int err; |
Joe Perches | 0795af5 | 2007-10-03 17:59:30 -0700 | [diff] [blame] | 2811 | DECLARE_MAC_BUF(mac); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2812 | |
| 2813 | if (modparam_nohwcrypt) |
| 2814 | return -ENOSPC; /* User disabled HW-crypto */ |
| 2815 | |
Michael Buesch | c6dfc9a | 2007-10-28 15:59:58 +0100 | [diff] [blame] | 2816 | mutex_lock(&wl->mutex); |
| 2817 | spin_lock_irqsave(&wl->irq_lock, flags); |
| 2818 | |
| 2819 | dev = wl->current_dev; |
| 2820 | err = -ENODEV; |
| 2821 | if (!dev || b43_status(dev) < B43_STAT_INITIALIZED) |
| 2822 | goto out_unlock; |
| 2823 | |
| 2824 | err = -EINVAL; |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2825 | switch (key->alg) { |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2826 | case ALG_WEP: |
| 2827 | if (key->keylen == 5) |
| 2828 | algorithm = B43_SEC_ALGO_WEP40; |
| 2829 | else |
| 2830 | algorithm = B43_SEC_ALGO_WEP104; |
| 2831 | break; |
| 2832 | case ALG_TKIP: |
| 2833 | algorithm = B43_SEC_ALGO_TKIP; |
| 2834 | break; |
| 2835 | case ALG_CCMP: |
| 2836 | algorithm = B43_SEC_ALGO_AES; |
| 2837 | break; |
| 2838 | default: |
| 2839 | B43_WARN_ON(1); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2840 | goto out_unlock; |
| 2841 | } |
Michael Buesch | c6dfc9a | 2007-10-28 15:59:58 +0100 | [diff] [blame] | 2842 | index = (u8) (key->keyidx); |
| 2843 | if (index > 3) |
| 2844 | goto out_unlock; |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2845 | |
| 2846 | switch (cmd) { |
| 2847 | case SET_KEY: |
| 2848 | if (algorithm == B43_SEC_ALGO_TKIP) { |
| 2849 | /* FIXME: No TKIP hardware encryption for now. */ |
| 2850 | err = -EOPNOTSUPP; |
| 2851 | goto out_unlock; |
| 2852 | } |
| 2853 | |
| 2854 | if (is_broadcast_ether_addr(addr)) { |
| 2855 | /* addr is FF:FF:FF:FF:FF:FF for default keys */ |
| 2856 | err = b43_key_write(dev, index, algorithm, |
| 2857 | key->key, key->keylen, NULL, key); |
| 2858 | } else { |
| 2859 | /* |
| 2860 | * either pairwise key or address is 00:00:00:00:00:00 |
| 2861 | * for transmit-only keys |
| 2862 | */ |
| 2863 | err = b43_key_write(dev, -1, algorithm, |
| 2864 | key->key, key->keylen, addr, key); |
| 2865 | } |
| 2866 | if (err) |
| 2867 | goto out_unlock; |
| 2868 | |
| 2869 | if (algorithm == B43_SEC_ALGO_WEP40 || |
| 2870 | algorithm == B43_SEC_ALGO_WEP104) { |
| 2871 | b43_hf_write(dev, b43_hf_read(dev) | B43_HF_USEDEFKEYS); |
| 2872 | } else { |
| 2873 | b43_hf_write(dev, |
| 2874 | b43_hf_read(dev) & ~B43_HF_USEDEFKEYS); |
| 2875 | } |
| 2876 | key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; |
| 2877 | break; |
| 2878 | case DISABLE_KEY: { |
| 2879 | err = b43_key_clear(dev, key->hw_key_idx); |
| 2880 | if (err) |
| 2881 | goto out_unlock; |
| 2882 | break; |
| 2883 | } |
| 2884 | default: |
| 2885 | B43_WARN_ON(1); |
| 2886 | } |
| 2887 | out_unlock: |
| 2888 | spin_unlock_irqrestore(&wl->irq_lock, flags); |
| 2889 | mutex_unlock(&wl->mutex); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2890 | if (!err) { |
| 2891 | b43dbg(wl, "%s hardware based encryption for keyidx: %d, " |
Joe Perches | 0795af5 | 2007-10-03 17:59:30 -0700 | [diff] [blame] | 2892 | "mac: %s\n", |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2893 | cmd == SET_KEY ? "Using" : "Disabling", key->keyidx, |
Joe Perches | 0795af5 | 2007-10-03 17:59:30 -0700 | [diff] [blame] | 2894 | print_mac(mac, addr)); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2895 | } |
| 2896 | return err; |
| 2897 | } |
| 2898 | |
Michael Buesch | 40faacc | 2007-10-28 16:29:32 +0100 | [diff] [blame^] | 2899 | static void b43_op_configure_filter(struct ieee80211_hw *hw, |
| 2900 | unsigned int changed, unsigned int *fflags, |
| 2901 | int mc_count, struct dev_addr_list *mc_list) |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2902 | { |
| 2903 | struct b43_wl *wl = hw_to_b43_wl(hw); |
| 2904 | struct b43_wldev *dev = wl->current_dev; |
| 2905 | unsigned long flags; |
| 2906 | |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 2907 | if (!dev) { |
| 2908 | *fflags = 0; |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2909 | return; |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2910 | } |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 2911 | |
| 2912 | spin_lock_irqsave(&wl->irq_lock, flags); |
| 2913 | *fflags &= FIF_PROMISC_IN_BSS | |
| 2914 | FIF_ALLMULTI | |
| 2915 | FIF_FCSFAIL | |
| 2916 | FIF_PLCPFAIL | |
| 2917 | FIF_CONTROL | |
| 2918 | FIF_OTHER_BSS | |
| 2919 | FIF_BCN_PRBRESP_PROMISC; |
| 2920 | |
| 2921 | changed &= FIF_PROMISC_IN_BSS | |
| 2922 | FIF_ALLMULTI | |
| 2923 | FIF_FCSFAIL | |
| 2924 | FIF_PLCPFAIL | |
| 2925 | FIF_CONTROL | |
| 2926 | FIF_OTHER_BSS | |
| 2927 | FIF_BCN_PRBRESP_PROMISC; |
| 2928 | |
| 2929 | wl->filter_flags = *fflags; |
| 2930 | |
| 2931 | if (changed && b43_status(dev) >= B43_STAT_INITIALIZED) |
| 2932 | b43_adjust_opmode(dev); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2933 | spin_unlock_irqrestore(&wl->irq_lock, flags); |
| 2934 | } |
| 2935 | |
Michael Buesch | 40faacc | 2007-10-28 16:29:32 +0100 | [diff] [blame^] | 2936 | static int b43_op_config_interface(struct ieee80211_hw *hw, |
| 2937 | int if_id, |
| 2938 | struct ieee80211_if_conf *conf) |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2939 | { |
| 2940 | struct b43_wl *wl = hw_to_b43_wl(hw); |
| 2941 | struct b43_wldev *dev = wl->current_dev; |
| 2942 | unsigned long flags; |
| 2943 | |
| 2944 | if (!dev) |
| 2945 | return -ENODEV; |
| 2946 | mutex_lock(&wl->mutex); |
| 2947 | spin_lock_irqsave(&wl->irq_lock, flags); |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 2948 | B43_WARN_ON(wl->if_id != if_id); |
| 2949 | if (conf->bssid) |
| 2950 | memcpy(wl->bssid, conf->bssid, ETH_ALEN); |
| 2951 | else |
| 2952 | memset(wl->bssid, 0, ETH_ALEN); |
| 2953 | if (b43_status(dev) >= B43_STAT_INITIALIZED) { |
| 2954 | if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP)) { |
| 2955 | B43_WARN_ON(conf->type != IEEE80211_IF_TYPE_AP); |
| 2956 | b43_set_ssid(dev, conf->ssid, conf->ssid_len); |
| 2957 | if (conf->beacon) |
| 2958 | b43_refresh_templates(dev, conf->beacon); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2959 | } |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 2960 | b43_write_mac_bssid_templates(dev); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2961 | } |
| 2962 | spin_unlock_irqrestore(&wl->irq_lock, flags); |
| 2963 | mutex_unlock(&wl->mutex); |
| 2964 | |
| 2965 | return 0; |
| 2966 | } |
| 2967 | |
| 2968 | /* Locking: wl->mutex */ |
| 2969 | static void b43_wireless_core_stop(struct b43_wldev *dev) |
| 2970 | { |
| 2971 | struct b43_wl *wl = dev->wl; |
| 2972 | unsigned long flags; |
| 2973 | |
| 2974 | if (b43_status(dev) < B43_STAT_STARTED) |
| 2975 | return; |
Stefano Brivio | a19d12d | 2007-11-07 18:16:11 +0100 | [diff] [blame] | 2976 | |
| 2977 | /* Disable and sync interrupts. We must do this before than |
| 2978 | * setting the status to INITIALIZED, as the interrupt handler |
| 2979 | * won't care about IRQs then. */ |
| 2980 | spin_lock_irqsave(&wl->irq_lock, flags); |
| 2981 | dev->irq_savedstate = b43_interrupt_disable(dev, B43_IRQ_ALL); |
| 2982 | b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* flush */ |
| 2983 | spin_unlock_irqrestore(&wl->irq_lock, flags); |
| 2984 | b43_synchronize_irq(dev); |
| 2985 | |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2986 | b43_set_status(dev, B43_STAT_INITIALIZED); |
| 2987 | |
| 2988 | mutex_unlock(&wl->mutex); |
| 2989 | /* Must unlock as it would otherwise deadlock. No races here. |
| 2990 | * Cancel the possibly running self-rearming periodic work. */ |
| 2991 | cancel_delayed_work_sync(&dev->periodic_work); |
| 2992 | mutex_lock(&wl->mutex); |
| 2993 | |
| 2994 | ieee80211_stop_queues(wl->hw); //FIXME this could cause a deadlock, as mac80211 seems buggy. |
| 2995 | |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 2996 | b43_mac_suspend(dev); |
| 2997 | free_irq(dev->dev->irq, dev); |
| 2998 | b43dbg(wl, "Wireless interface stopped\n"); |
| 2999 | } |
| 3000 | |
| 3001 | /* Locking: wl->mutex */ |
| 3002 | static int b43_wireless_core_start(struct b43_wldev *dev) |
| 3003 | { |
| 3004 | int err; |
| 3005 | |
| 3006 | B43_WARN_ON(b43_status(dev) != B43_STAT_INITIALIZED); |
| 3007 | |
| 3008 | drain_txstatus_queue(dev); |
| 3009 | err = request_irq(dev->dev->irq, b43_interrupt_handler, |
| 3010 | IRQF_SHARED, KBUILD_MODNAME, dev); |
| 3011 | if (err) { |
| 3012 | b43err(dev->wl, "Cannot request IRQ-%d\n", dev->dev->irq); |
| 3013 | goto out; |
| 3014 | } |
| 3015 | |
| 3016 | /* We are ready to run. */ |
| 3017 | b43_set_status(dev, B43_STAT_STARTED); |
| 3018 | |
| 3019 | /* Start data flow (TX/RX). */ |
| 3020 | b43_mac_enable(dev); |
| 3021 | b43_interrupt_enable(dev, dev->irq_savedstate); |
| 3022 | ieee80211_start_queues(dev->wl->hw); |
| 3023 | |
| 3024 | /* Start maintainance work */ |
| 3025 | b43_periodic_tasks_setup(dev); |
| 3026 | |
| 3027 | b43dbg(dev->wl, "Wireless interface started\n"); |
| 3028 | out: |
| 3029 | return err; |
| 3030 | } |
| 3031 | |
| 3032 | /* Get PHY and RADIO versioning numbers */ |
| 3033 | static int b43_phy_versioning(struct b43_wldev *dev) |
| 3034 | { |
| 3035 | struct b43_phy *phy = &dev->phy; |
| 3036 | u32 tmp; |
| 3037 | u8 analog_type; |
| 3038 | u8 phy_type; |
| 3039 | u8 phy_rev; |
| 3040 | u16 radio_manuf; |
| 3041 | u16 radio_ver; |
| 3042 | u16 radio_rev; |
| 3043 | int unsupported = 0; |
| 3044 | |
| 3045 | /* Get PHY versioning */ |
| 3046 | tmp = b43_read16(dev, B43_MMIO_PHY_VER); |
| 3047 | analog_type = (tmp & B43_PHYVER_ANALOG) >> B43_PHYVER_ANALOG_SHIFT; |
| 3048 | phy_type = (tmp & B43_PHYVER_TYPE) >> B43_PHYVER_TYPE_SHIFT; |
| 3049 | phy_rev = (tmp & B43_PHYVER_VERSION); |
| 3050 | switch (phy_type) { |
| 3051 | case B43_PHYTYPE_A: |
| 3052 | if (phy_rev >= 4) |
| 3053 | unsupported = 1; |
| 3054 | break; |
| 3055 | case B43_PHYTYPE_B: |
| 3056 | if (phy_rev != 2 && phy_rev != 4 && phy_rev != 6 |
| 3057 | && phy_rev != 7) |
| 3058 | unsupported = 1; |
| 3059 | break; |
| 3060 | case B43_PHYTYPE_G: |
| 3061 | if (phy_rev > 8) |
| 3062 | unsupported = 1; |
| 3063 | break; |
| 3064 | default: |
| 3065 | unsupported = 1; |
| 3066 | }; |
| 3067 | if (unsupported) { |
| 3068 | b43err(dev->wl, "FOUND UNSUPPORTED PHY " |
| 3069 | "(Analog %u, Type %u, Revision %u)\n", |
| 3070 | analog_type, phy_type, phy_rev); |
| 3071 | return -EOPNOTSUPP; |
| 3072 | } |
| 3073 | b43dbg(dev->wl, "Found PHY: Analog %u, Type %u, Revision %u\n", |
| 3074 | analog_type, phy_type, phy_rev); |
| 3075 | |
| 3076 | /* Get RADIO versioning */ |
| 3077 | if (dev->dev->bus->chip_id == 0x4317) { |
| 3078 | if (dev->dev->bus->chip_rev == 0) |
| 3079 | tmp = 0x3205017F; |
| 3080 | else if (dev->dev->bus->chip_rev == 1) |
| 3081 | tmp = 0x4205017F; |
| 3082 | else |
| 3083 | tmp = 0x5205017F; |
| 3084 | } else { |
| 3085 | b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID); |
| 3086 | tmp = b43_read16(dev, B43_MMIO_RADIO_DATA_HIGH); |
| 3087 | tmp <<= 16; |
| 3088 | b43_write16(dev, B43_MMIO_RADIO_CONTROL, B43_RADIOCTL_ID); |
| 3089 | tmp |= b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); |
| 3090 | } |
| 3091 | radio_manuf = (tmp & 0x00000FFF); |
| 3092 | radio_ver = (tmp & 0x0FFFF000) >> 12; |
| 3093 | radio_rev = (tmp & 0xF0000000) >> 28; |
| 3094 | switch (phy_type) { |
| 3095 | case B43_PHYTYPE_A: |
| 3096 | if (radio_ver != 0x2060) |
| 3097 | unsupported = 1; |
| 3098 | if (radio_rev != 1) |
| 3099 | unsupported = 1; |
| 3100 | if (radio_manuf != 0x17F) |
| 3101 | unsupported = 1; |
| 3102 | break; |
| 3103 | case B43_PHYTYPE_B: |
| 3104 | if ((radio_ver & 0xFFF0) != 0x2050) |
| 3105 | unsupported = 1; |
| 3106 | break; |
| 3107 | case B43_PHYTYPE_G: |
| 3108 | if (radio_ver != 0x2050) |
| 3109 | unsupported = 1; |
| 3110 | break; |
| 3111 | default: |
| 3112 | B43_WARN_ON(1); |
| 3113 | } |
| 3114 | if (unsupported) { |
| 3115 | b43err(dev->wl, "FOUND UNSUPPORTED RADIO " |
| 3116 | "(Manuf 0x%X, Version 0x%X, Revision %u)\n", |
| 3117 | radio_manuf, radio_ver, radio_rev); |
| 3118 | return -EOPNOTSUPP; |
| 3119 | } |
| 3120 | b43dbg(dev->wl, "Found Radio: Manuf 0x%X, Version 0x%X, Revision %u\n", |
| 3121 | radio_manuf, radio_ver, radio_rev); |
| 3122 | |
| 3123 | phy->radio_manuf = radio_manuf; |
| 3124 | phy->radio_ver = radio_ver; |
| 3125 | phy->radio_rev = radio_rev; |
| 3126 | |
| 3127 | phy->analog = analog_type; |
| 3128 | phy->type = phy_type; |
| 3129 | phy->rev = phy_rev; |
| 3130 | |
| 3131 | return 0; |
| 3132 | } |
| 3133 | |
| 3134 | static void setup_struct_phy_for_init(struct b43_wldev *dev, |
| 3135 | struct b43_phy *phy) |
| 3136 | { |
| 3137 | struct b43_txpower_lo_control *lo; |
| 3138 | int i; |
| 3139 | |
| 3140 | memset(phy->minlowsig, 0xFF, sizeof(phy->minlowsig)); |
| 3141 | memset(phy->minlowsigpos, 0, sizeof(phy->minlowsigpos)); |
| 3142 | |
| 3143 | /* Flags */ |
| 3144 | phy->locked = 0; |
| 3145 | |
| 3146 | phy->aci_enable = 0; |
| 3147 | phy->aci_wlan_automatic = 0; |
| 3148 | phy->aci_hw_rssi = 0; |
| 3149 | |
Michael Buesch | fda9abc | 2007-09-20 22:14:18 +0200 | [diff] [blame] | 3150 | phy->radio_off_context.valid = 0; |
| 3151 | |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3152 | lo = phy->lo_control; |
| 3153 | if (lo) { |
| 3154 | memset(lo, 0, sizeof(*(phy->lo_control))); |
| 3155 | lo->rebuild = 1; |
| 3156 | lo->tx_bias = 0xFF; |
| 3157 | } |
| 3158 | phy->max_lb_gain = 0; |
| 3159 | phy->trsw_rx_gain = 0; |
| 3160 | phy->txpwr_offset = 0; |
| 3161 | |
| 3162 | /* NRSSI */ |
| 3163 | phy->nrssislope = 0; |
| 3164 | for (i = 0; i < ARRAY_SIZE(phy->nrssi); i++) |
| 3165 | phy->nrssi[i] = -1000; |
| 3166 | for (i = 0; i < ARRAY_SIZE(phy->nrssi_lt); i++) |
| 3167 | phy->nrssi_lt[i] = i; |
| 3168 | |
| 3169 | phy->lofcal = 0xFFFF; |
| 3170 | phy->initval = 0xFFFF; |
| 3171 | |
| 3172 | spin_lock_init(&phy->lock); |
| 3173 | phy->interfmode = B43_INTERFMODE_NONE; |
| 3174 | phy->channel = 0xFF; |
| 3175 | |
| 3176 | phy->hardware_power_control = !!modparam_hwpctl; |
| 3177 | } |
| 3178 | |
| 3179 | static void setup_struct_wldev_for_init(struct b43_wldev *dev) |
| 3180 | { |
| 3181 | /* Flags */ |
| 3182 | dev->reg124_set_0x4 = 0; |
Michael Buesch | 6a724d6 | 2007-09-20 22:12:58 +0200 | [diff] [blame] | 3183 | /* Assume the radio is enabled. If it's not enabled, the state will |
| 3184 | * immediately get fixed on the first periodic work run. */ |
| 3185 | dev->radio_hw_enable = 1; |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3186 | |
| 3187 | /* Stats */ |
| 3188 | memset(&dev->stats, 0, sizeof(dev->stats)); |
| 3189 | |
| 3190 | setup_struct_phy_for_init(dev, &dev->phy); |
| 3191 | |
| 3192 | /* IRQ related flags */ |
| 3193 | dev->irq_reason = 0; |
| 3194 | memset(dev->dma_reason, 0, sizeof(dev->dma_reason)); |
| 3195 | dev->irq_savedstate = B43_IRQ_MASKTEMPLATE; |
| 3196 | |
| 3197 | dev->mac_suspended = 1; |
| 3198 | |
| 3199 | /* Noise calculation context */ |
| 3200 | memset(&dev->noisecalc, 0, sizeof(dev->noisecalc)); |
| 3201 | } |
| 3202 | |
| 3203 | static void b43_bluetooth_coext_enable(struct b43_wldev *dev) |
| 3204 | { |
| 3205 | struct ssb_sprom *sprom = &dev->dev->bus->sprom; |
| 3206 | u32 hf; |
| 3207 | |
| 3208 | if (!(sprom->r1.boardflags_lo & B43_BFL_BTCOEXIST)) |
| 3209 | return; |
| 3210 | if (dev->phy.type != B43_PHYTYPE_B && !dev->phy.gmode) |
| 3211 | return; |
| 3212 | |
| 3213 | hf = b43_hf_read(dev); |
| 3214 | if (sprom->r1.boardflags_lo & B43_BFL_BTCMOD) |
| 3215 | hf |= B43_HF_BTCOEXALT; |
| 3216 | else |
| 3217 | hf |= B43_HF_BTCOEX; |
| 3218 | b43_hf_write(dev, hf); |
| 3219 | //TODO |
| 3220 | } |
| 3221 | |
| 3222 | static void b43_bluetooth_coext_disable(struct b43_wldev *dev) |
| 3223 | { //TODO |
| 3224 | } |
| 3225 | |
| 3226 | static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev) |
| 3227 | { |
| 3228 | #ifdef CONFIG_SSB_DRIVER_PCICORE |
| 3229 | struct ssb_bus *bus = dev->dev->bus; |
| 3230 | u32 tmp; |
| 3231 | |
| 3232 | if (bus->pcicore.dev && |
| 3233 | bus->pcicore.dev->id.coreid == SSB_DEV_PCI && |
| 3234 | bus->pcicore.dev->id.revision <= 5) { |
| 3235 | /* IMCFGLO timeouts workaround. */ |
| 3236 | tmp = ssb_read32(dev->dev, SSB_IMCFGLO); |
| 3237 | tmp &= ~SSB_IMCFGLO_REQTO; |
| 3238 | tmp &= ~SSB_IMCFGLO_SERTO; |
| 3239 | switch (bus->bustype) { |
| 3240 | case SSB_BUSTYPE_PCI: |
| 3241 | case SSB_BUSTYPE_PCMCIA: |
| 3242 | tmp |= 0x32; |
| 3243 | break; |
| 3244 | case SSB_BUSTYPE_SSB: |
| 3245 | tmp |= 0x53; |
| 3246 | break; |
| 3247 | } |
| 3248 | ssb_write32(dev->dev, SSB_IMCFGLO, tmp); |
| 3249 | } |
| 3250 | #endif /* CONFIG_SSB_DRIVER_PCICORE */ |
| 3251 | } |
| 3252 | |
Michael Buesch | 74cfdba | 2007-10-28 16:19:44 +0100 | [diff] [blame] | 3253 | /* Write the short and long frame retry limit values. */ |
| 3254 | static void b43_set_retry_limits(struct b43_wldev *dev, |
| 3255 | unsigned int short_retry, |
| 3256 | unsigned int long_retry) |
| 3257 | { |
| 3258 | /* The retry limit is a 4-bit counter. Enforce this to avoid overflowing |
| 3259 | * the chip-internal counter. */ |
| 3260 | short_retry = min(short_retry, (unsigned int)0xF); |
| 3261 | long_retry = min(long_retry, (unsigned int)0xF); |
| 3262 | |
| 3263 | b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_SRLIMIT, |
| 3264 | short_retry); |
| 3265 | b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_LRLIMIT, |
| 3266 | long_retry); |
| 3267 | } |
| 3268 | |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3269 | /* Shutdown a wireless core */ |
| 3270 | /* Locking: wl->mutex */ |
| 3271 | static void b43_wireless_core_exit(struct b43_wldev *dev) |
| 3272 | { |
| 3273 | struct b43_phy *phy = &dev->phy; |
| 3274 | |
| 3275 | B43_WARN_ON(b43_status(dev) > B43_STAT_INITIALIZED); |
| 3276 | if (b43_status(dev) != B43_STAT_INITIALIZED) |
| 3277 | return; |
| 3278 | b43_set_status(dev, B43_STAT_UNINIT); |
| 3279 | |
Larry Finger | 1a8d122 | 2007-12-14 13:59:11 +0100 | [diff] [blame] | 3280 | b43_leds_exit(dev); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3281 | b43_rng_exit(dev->wl); |
| 3282 | b43_pio_free(dev); |
| 3283 | b43_dma_free(dev); |
| 3284 | b43_chip_exit(dev); |
Michael Buesch | 8e9f752 | 2007-09-27 21:35:34 +0200 | [diff] [blame] | 3285 | b43_radio_turn_off(dev, 1); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3286 | b43_switch_analog(dev, 0); |
| 3287 | if (phy->dyn_tssi_tbl) |
| 3288 | kfree(phy->tssi2dbm); |
| 3289 | kfree(phy->lo_control); |
| 3290 | phy->lo_control = NULL; |
| 3291 | ssb_device_disable(dev->dev, 0); |
| 3292 | ssb_bus_may_powerdown(dev->dev->bus); |
| 3293 | } |
| 3294 | |
| 3295 | /* Initialize a wireless core */ |
| 3296 | static int b43_wireless_core_init(struct b43_wldev *dev) |
| 3297 | { |
| 3298 | struct b43_wl *wl = dev->wl; |
| 3299 | struct ssb_bus *bus = dev->dev->bus; |
| 3300 | struct ssb_sprom *sprom = &bus->sprom; |
| 3301 | struct b43_phy *phy = &dev->phy; |
| 3302 | int err; |
| 3303 | u32 hf, tmp; |
| 3304 | |
| 3305 | B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT); |
| 3306 | |
| 3307 | err = ssb_bus_powerup(bus, 0); |
| 3308 | if (err) |
| 3309 | goto out; |
| 3310 | if (!ssb_device_is_enabled(dev->dev)) { |
| 3311 | tmp = phy->gmode ? B43_TMSLOW_GMODE : 0; |
| 3312 | b43_wireless_core_reset(dev, tmp); |
| 3313 | } |
| 3314 | |
| 3315 | if ((phy->type == B43_PHYTYPE_B) || (phy->type == B43_PHYTYPE_G)) { |
| 3316 | phy->lo_control = |
| 3317 | kzalloc(sizeof(*(phy->lo_control)), GFP_KERNEL); |
| 3318 | if (!phy->lo_control) { |
| 3319 | err = -ENOMEM; |
| 3320 | goto err_busdown; |
| 3321 | } |
| 3322 | } |
| 3323 | setup_struct_wldev_for_init(dev); |
| 3324 | |
| 3325 | err = b43_phy_init_tssi2dbm_table(dev); |
| 3326 | if (err) |
| 3327 | goto err_kfree_lo_control; |
| 3328 | |
| 3329 | /* Enable IRQ routing to this device. */ |
| 3330 | ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev); |
| 3331 | |
| 3332 | b43_imcfglo_timeouts_workaround(dev); |
| 3333 | b43_bluetooth_coext_disable(dev); |
| 3334 | b43_phy_early_init(dev); |
| 3335 | err = b43_chip_init(dev); |
| 3336 | if (err) |
| 3337 | goto err_kfree_tssitbl; |
| 3338 | b43_shm_write16(dev, B43_SHM_SHARED, |
| 3339 | B43_SHM_SH_WLCOREREV, dev->dev->id.revision); |
| 3340 | hf = b43_hf_read(dev); |
| 3341 | if (phy->type == B43_PHYTYPE_G) { |
| 3342 | hf |= B43_HF_SYMW; |
| 3343 | if (phy->rev == 1) |
| 3344 | hf |= B43_HF_GDCW; |
| 3345 | if (sprom->r1.boardflags_lo & B43_BFL_PACTRL) |
| 3346 | hf |= B43_HF_OFDMPABOOST; |
| 3347 | } else if (phy->type == B43_PHYTYPE_B) { |
| 3348 | hf |= B43_HF_SYMW; |
| 3349 | if (phy->rev >= 2 && phy->radio_ver == 0x2050) |
| 3350 | hf &= ~B43_HF_GDCW; |
| 3351 | } |
| 3352 | b43_hf_write(dev, hf); |
| 3353 | |
Michael Buesch | 74cfdba | 2007-10-28 16:19:44 +0100 | [diff] [blame] | 3354 | b43_set_retry_limits(dev, B43_DEFAULT_SHORT_RETRY_LIMIT, |
| 3355 | B43_DEFAULT_LONG_RETRY_LIMIT); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3356 | b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_SFFBLIM, 3); |
| 3357 | b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_LFFBLIM, 2); |
| 3358 | |
| 3359 | /* Disable sending probe responses from firmware. |
| 3360 | * Setting the MaxTime to one usec will always trigger |
| 3361 | * a timeout, so we never send any probe resp. |
| 3362 | * A timeout of zero is infinite. */ |
| 3363 | b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRMAXTIME, 1); |
| 3364 | |
| 3365 | b43_rate_memory_init(dev); |
| 3366 | |
| 3367 | /* Minimum Contention Window */ |
| 3368 | if (phy->type == B43_PHYTYPE_B) { |
| 3369 | b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0x1F); |
| 3370 | } else { |
| 3371 | b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MINCONT, 0xF); |
| 3372 | } |
| 3373 | /* Maximum Contention Window */ |
| 3374 | b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MAXCONT, 0x3FF); |
| 3375 | |
| 3376 | do { |
| 3377 | if (b43_using_pio(dev)) { |
| 3378 | err = b43_pio_init(dev); |
| 3379 | } else { |
| 3380 | err = b43_dma_init(dev); |
| 3381 | if (!err) |
| 3382 | b43_qos_init(dev); |
| 3383 | } |
| 3384 | } while (err == -EAGAIN); |
| 3385 | if (err) |
| 3386 | goto err_chip_exit; |
| 3387 | |
| 3388 | //FIXME |
| 3389 | #if 1 |
| 3390 | b43_write16(dev, 0x0612, 0x0050); |
| 3391 | b43_shm_write16(dev, B43_SHM_SHARED, 0x0416, 0x0050); |
| 3392 | b43_shm_write16(dev, B43_SHM_SHARED, 0x0414, 0x01F4); |
| 3393 | #endif |
| 3394 | |
| 3395 | b43_bluetooth_coext_enable(dev); |
| 3396 | |
| 3397 | ssb_bus_powerup(bus, 1); /* Enable dynamic PCTL */ |
| 3398 | memset(wl->bssid, 0, ETH_ALEN); |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 3399 | memset(wl->mac_addr, 0, ETH_ALEN); |
| 3400 | b43_upload_card_macaddress(dev); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3401 | b43_security_init(dev); |
| 3402 | b43_rng_init(wl); |
| 3403 | |
| 3404 | b43_set_status(dev, B43_STAT_INITIALIZED); |
| 3405 | |
Larry Finger | 1a8d122 | 2007-12-14 13:59:11 +0100 | [diff] [blame] | 3406 | b43_leds_init(dev); |
| 3407 | out: |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3408 | return err; |
| 3409 | |
| 3410 | err_chip_exit: |
| 3411 | b43_chip_exit(dev); |
| 3412 | err_kfree_tssitbl: |
| 3413 | if (phy->dyn_tssi_tbl) |
| 3414 | kfree(phy->tssi2dbm); |
| 3415 | err_kfree_lo_control: |
| 3416 | kfree(phy->lo_control); |
| 3417 | phy->lo_control = NULL; |
| 3418 | err_busdown: |
| 3419 | ssb_bus_may_powerdown(bus); |
| 3420 | B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT); |
| 3421 | return err; |
| 3422 | } |
| 3423 | |
Michael Buesch | 40faacc | 2007-10-28 16:29:32 +0100 | [diff] [blame^] | 3424 | static int b43_op_add_interface(struct ieee80211_hw *hw, |
| 3425 | struct ieee80211_if_init_conf *conf) |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3426 | { |
| 3427 | struct b43_wl *wl = hw_to_b43_wl(hw); |
| 3428 | struct b43_wldev *dev; |
| 3429 | unsigned long flags; |
| 3430 | int err = -EOPNOTSUPP; |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 3431 | |
| 3432 | /* TODO: allow WDS/AP devices to coexist */ |
| 3433 | |
| 3434 | if (conf->type != IEEE80211_IF_TYPE_AP && |
| 3435 | conf->type != IEEE80211_IF_TYPE_STA && |
| 3436 | conf->type != IEEE80211_IF_TYPE_WDS && |
| 3437 | conf->type != IEEE80211_IF_TYPE_IBSS) |
| 3438 | return -EOPNOTSUPP; |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3439 | |
| 3440 | mutex_lock(&wl->mutex); |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 3441 | if (wl->operating) |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3442 | goto out_mutex_unlock; |
| 3443 | |
| 3444 | b43dbg(wl, "Adding Interface type %d\n", conf->type); |
| 3445 | |
| 3446 | dev = wl->current_dev; |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 3447 | wl->operating = 1; |
| 3448 | wl->if_id = conf->if_id; |
| 3449 | wl->if_type = conf->type; |
| 3450 | memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3451 | |
| 3452 | spin_lock_irqsave(&wl->irq_lock, flags); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3453 | b43_adjust_opmode(dev); |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 3454 | b43_upload_card_macaddress(dev); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3455 | spin_unlock_irqrestore(&wl->irq_lock, flags); |
| 3456 | |
| 3457 | err = 0; |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 3458 | out_mutex_unlock: |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3459 | mutex_unlock(&wl->mutex); |
| 3460 | |
| 3461 | return err; |
| 3462 | } |
| 3463 | |
Michael Buesch | 40faacc | 2007-10-28 16:29:32 +0100 | [diff] [blame^] | 3464 | static void b43_op_remove_interface(struct ieee80211_hw *hw, |
| 3465 | struct ieee80211_if_init_conf *conf) |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3466 | { |
| 3467 | struct b43_wl *wl = hw_to_b43_wl(hw); |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 3468 | struct b43_wldev *dev = wl->current_dev; |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3469 | unsigned long flags; |
| 3470 | |
| 3471 | b43dbg(wl, "Removing Interface type %d\n", conf->type); |
| 3472 | |
| 3473 | mutex_lock(&wl->mutex); |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 3474 | |
| 3475 | B43_WARN_ON(!wl->operating); |
| 3476 | B43_WARN_ON(wl->if_id != conf->if_id); |
| 3477 | |
| 3478 | wl->operating = 0; |
| 3479 | |
| 3480 | spin_lock_irqsave(&wl->irq_lock, flags); |
| 3481 | b43_adjust_opmode(dev); |
| 3482 | memset(wl->mac_addr, 0, ETH_ALEN); |
| 3483 | b43_upload_card_macaddress(dev); |
| 3484 | spin_unlock_irqrestore(&wl->irq_lock, flags); |
| 3485 | |
| 3486 | mutex_unlock(&wl->mutex); |
| 3487 | } |
| 3488 | |
Michael Buesch | 40faacc | 2007-10-28 16:29:32 +0100 | [diff] [blame^] | 3489 | static int b43_op_start(struct ieee80211_hw *hw) |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 3490 | { |
| 3491 | struct b43_wl *wl = hw_to_b43_wl(hw); |
| 3492 | struct b43_wldev *dev = wl->current_dev; |
| 3493 | int did_init = 0; |
WANG Cong | 923403b | 2007-10-16 14:29:38 -0700 | [diff] [blame] | 3494 | int err = 0; |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 3495 | |
Larry Finger | 1a8d122 | 2007-12-14 13:59:11 +0100 | [diff] [blame] | 3496 | /* First register RFkill. |
| 3497 | * LEDs that are registered later depend on it. */ |
| 3498 | b43_rfkill_init(dev); |
| 3499 | |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 3500 | mutex_lock(&wl->mutex); |
| 3501 | |
| 3502 | if (b43_status(dev) < B43_STAT_INITIALIZED) { |
| 3503 | err = b43_wireless_core_init(dev); |
| 3504 | if (err) |
| 3505 | goto out_mutex_unlock; |
| 3506 | did_init = 1; |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3507 | } |
| 3508 | |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 3509 | if (b43_status(dev) < B43_STAT_STARTED) { |
| 3510 | err = b43_wireless_core_start(dev); |
| 3511 | if (err) { |
| 3512 | if (did_init) |
| 3513 | b43_wireless_core_exit(dev); |
| 3514 | goto out_mutex_unlock; |
| 3515 | } |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3516 | } |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 3517 | |
| 3518 | out_mutex_unlock: |
| 3519 | mutex_unlock(&wl->mutex); |
| 3520 | |
| 3521 | return err; |
| 3522 | } |
| 3523 | |
Michael Buesch | 40faacc | 2007-10-28 16:29:32 +0100 | [diff] [blame^] | 3524 | static void b43_op_stop(struct ieee80211_hw *hw) |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 3525 | { |
| 3526 | struct b43_wl *wl = hw_to_b43_wl(hw); |
| 3527 | struct b43_wldev *dev = wl->current_dev; |
| 3528 | |
Larry Finger | 1a8d122 | 2007-12-14 13:59:11 +0100 | [diff] [blame] | 3529 | b43_rfkill_exit(dev); |
| 3530 | |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 3531 | mutex_lock(&wl->mutex); |
| 3532 | if (b43_status(dev) >= B43_STAT_STARTED) |
| 3533 | b43_wireless_core_stop(dev); |
| 3534 | b43_wireless_core_exit(dev); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3535 | mutex_unlock(&wl->mutex); |
| 3536 | } |
| 3537 | |
Michael Buesch | 74cfdba | 2007-10-28 16:19:44 +0100 | [diff] [blame] | 3538 | static int b43_op_set_retry_limit(struct ieee80211_hw *hw, |
| 3539 | u32 short_retry_limit, u32 long_retry_limit) |
| 3540 | { |
| 3541 | struct b43_wl *wl = hw_to_b43_wl(hw); |
| 3542 | struct b43_wldev *dev; |
| 3543 | int err = 0; |
| 3544 | |
| 3545 | mutex_lock(&wl->mutex); |
| 3546 | dev = wl->current_dev; |
| 3547 | if (unlikely(!dev || (b43_status(dev) < B43_STAT_INITIALIZED))) { |
| 3548 | err = -ENODEV; |
| 3549 | goto out_unlock; |
| 3550 | } |
| 3551 | b43_set_retry_limits(dev, short_retry_limit, long_retry_limit); |
| 3552 | out_unlock: |
| 3553 | mutex_unlock(&wl->mutex); |
| 3554 | |
| 3555 | return err; |
| 3556 | } |
| 3557 | |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3558 | static const struct ieee80211_ops b43_hw_ops = { |
Michael Buesch | 40faacc | 2007-10-28 16:29:32 +0100 | [diff] [blame^] | 3559 | .tx = b43_op_tx, |
| 3560 | .conf_tx = b43_op_conf_tx, |
| 3561 | .add_interface = b43_op_add_interface, |
| 3562 | .remove_interface = b43_op_remove_interface, |
| 3563 | .config = b43_op_config, |
| 3564 | .config_interface = b43_op_config_interface, |
| 3565 | .configure_filter = b43_op_configure_filter, |
| 3566 | .set_key = b43_op_set_key, |
| 3567 | .get_stats = b43_op_get_stats, |
| 3568 | .get_tx_stats = b43_op_get_tx_stats, |
| 3569 | .start = b43_op_start, |
| 3570 | .stop = b43_op_stop, |
Michael Buesch | 74cfdba | 2007-10-28 16:19:44 +0100 | [diff] [blame] | 3571 | .set_retry_limit = b43_op_set_retry_limit, |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3572 | }; |
| 3573 | |
| 3574 | /* Hard-reset the chip. Do not call this directly. |
| 3575 | * Use b43_controller_restart() |
| 3576 | */ |
| 3577 | static void b43_chip_reset(struct work_struct *work) |
| 3578 | { |
| 3579 | struct b43_wldev *dev = |
| 3580 | container_of(work, struct b43_wldev, restart_work); |
| 3581 | struct b43_wl *wl = dev->wl; |
| 3582 | int err = 0; |
| 3583 | int prev_status; |
| 3584 | |
| 3585 | mutex_lock(&wl->mutex); |
| 3586 | |
| 3587 | prev_status = b43_status(dev); |
| 3588 | /* Bring the device down... */ |
| 3589 | if (prev_status >= B43_STAT_STARTED) |
| 3590 | b43_wireless_core_stop(dev); |
| 3591 | if (prev_status >= B43_STAT_INITIALIZED) |
| 3592 | b43_wireless_core_exit(dev); |
| 3593 | |
| 3594 | /* ...and up again. */ |
| 3595 | if (prev_status >= B43_STAT_INITIALIZED) { |
| 3596 | err = b43_wireless_core_init(dev); |
| 3597 | if (err) |
| 3598 | goto out; |
| 3599 | } |
| 3600 | if (prev_status >= B43_STAT_STARTED) { |
| 3601 | err = b43_wireless_core_start(dev); |
| 3602 | if (err) { |
| 3603 | b43_wireless_core_exit(dev); |
| 3604 | goto out; |
| 3605 | } |
| 3606 | } |
| 3607 | out: |
| 3608 | mutex_unlock(&wl->mutex); |
| 3609 | if (err) |
| 3610 | b43err(wl, "Controller restart FAILED\n"); |
| 3611 | else |
| 3612 | b43info(wl, "Controller restarted\n"); |
| 3613 | } |
| 3614 | |
| 3615 | static int b43_setup_modes(struct b43_wldev *dev, |
| 3616 | int have_aphy, int have_bphy, int have_gphy) |
| 3617 | { |
| 3618 | struct ieee80211_hw *hw = dev->wl->hw; |
| 3619 | struct ieee80211_hw_mode *mode; |
| 3620 | struct b43_phy *phy = &dev->phy; |
| 3621 | int cnt = 0; |
| 3622 | int err; |
| 3623 | |
| 3624 | /*FIXME: Don't tell ieee80211 about an A-PHY, because we currently don't support A-PHY. */ |
| 3625 | have_aphy = 0; |
| 3626 | |
| 3627 | phy->possible_phymodes = 0; |
| 3628 | for (; 1; cnt++) { |
| 3629 | if (have_aphy) { |
| 3630 | B43_WARN_ON(cnt >= B43_MAX_PHYHWMODES); |
| 3631 | mode = &phy->hwmodes[cnt]; |
| 3632 | |
| 3633 | mode->mode = MODE_IEEE80211A; |
| 3634 | mode->num_channels = b43_a_chantable_size; |
| 3635 | mode->channels = b43_a_chantable; |
| 3636 | mode->num_rates = b43_a_ratetable_size; |
| 3637 | mode->rates = b43_a_ratetable; |
| 3638 | err = ieee80211_register_hwmode(hw, mode); |
| 3639 | if (err) |
| 3640 | return err; |
| 3641 | |
| 3642 | phy->possible_phymodes |= B43_PHYMODE_A; |
| 3643 | have_aphy = 0; |
| 3644 | continue; |
| 3645 | } |
| 3646 | if (have_bphy) { |
| 3647 | B43_WARN_ON(cnt >= B43_MAX_PHYHWMODES); |
| 3648 | mode = &phy->hwmodes[cnt]; |
| 3649 | |
| 3650 | mode->mode = MODE_IEEE80211B; |
| 3651 | mode->num_channels = b43_bg_chantable_size; |
| 3652 | mode->channels = b43_bg_chantable; |
| 3653 | mode->num_rates = b43_b_ratetable_size; |
| 3654 | mode->rates = b43_b_ratetable; |
| 3655 | err = ieee80211_register_hwmode(hw, mode); |
| 3656 | if (err) |
| 3657 | return err; |
| 3658 | |
| 3659 | phy->possible_phymodes |= B43_PHYMODE_B; |
| 3660 | have_bphy = 0; |
| 3661 | continue; |
| 3662 | } |
| 3663 | if (have_gphy) { |
| 3664 | B43_WARN_ON(cnt >= B43_MAX_PHYHWMODES); |
| 3665 | mode = &phy->hwmodes[cnt]; |
| 3666 | |
| 3667 | mode->mode = MODE_IEEE80211G; |
| 3668 | mode->num_channels = b43_bg_chantable_size; |
| 3669 | mode->channels = b43_bg_chantable; |
| 3670 | mode->num_rates = b43_g_ratetable_size; |
| 3671 | mode->rates = b43_g_ratetable; |
| 3672 | err = ieee80211_register_hwmode(hw, mode); |
| 3673 | if (err) |
| 3674 | return err; |
| 3675 | |
| 3676 | phy->possible_phymodes |= B43_PHYMODE_G; |
| 3677 | have_gphy = 0; |
| 3678 | continue; |
| 3679 | } |
| 3680 | break; |
| 3681 | } |
| 3682 | |
| 3683 | return 0; |
| 3684 | } |
| 3685 | |
| 3686 | static void b43_wireless_core_detach(struct b43_wldev *dev) |
| 3687 | { |
| 3688 | /* We release firmware that late to not be required to re-request |
| 3689 | * is all the time when we reinit the core. */ |
| 3690 | b43_release_firmware(dev); |
| 3691 | } |
| 3692 | |
| 3693 | static int b43_wireless_core_attach(struct b43_wldev *dev) |
| 3694 | { |
| 3695 | struct b43_wl *wl = dev->wl; |
| 3696 | struct ssb_bus *bus = dev->dev->bus; |
| 3697 | struct pci_dev *pdev = bus->host_pci; |
| 3698 | int err; |
| 3699 | int have_aphy = 0, have_bphy = 0, have_gphy = 0; |
| 3700 | u32 tmp; |
| 3701 | |
| 3702 | /* Do NOT do any device initialization here. |
| 3703 | * Do it in wireless_core_init() instead. |
| 3704 | * This function is for gathering basic information about the HW, only. |
| 3705 | * Also some structs may be set up here. But most likely you want to have |
| 3706 | * that in core_init(), too. |
| 3707 | */ |
| 3708 | |
| 3709 | err = ssb_bus_powerup(bus, 0); |
| 3710 | if (err) { |
| 3711 | b43err(wl, "Bus powerup failed\n"); |
| 3712 | goto out; |
| 3713 | } |
| 3714 | /* Get the PHY type. */ |
| 3715 | if (dev->dev->id.revision >= 5) { |
| 3716 | u32 tmshigh; |
| 3717 | |
| 3718 | tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH); |
| 3719 | have_aphy = !!(tmshigh & B43_TMSHIGH_APHY); |
| 3720 | have_gphy = !!(tmshigh & B43_TMSHIGH_GPHY); |
| 3721 | if (!have_aphy && !have_gphy) |
| 3722 | have_bphy = 1; |
| 3723 | } else if (dev->dev->id.revision == 4) { |
| 3724 | have_gphy = 1; |
| 3725 | have_aphy = 1; |
| 3726 | } else |
| 3727 | have_bphy = 1; |
| 3728 | |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3729 | dev->phy.gmode = (have_gphy || have_bphy); |
| 3730 | tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0; |
| 3731 | b43_wireless_core_reset(dev, tmp); |
| 3732 | |
| 3733 | err = b43_phy_versioning(dev); |
| 3734 | if (err) |
Michael Buesch | 21954c3 | 2007-09-27 15:31:40 +0200 | [diff] [blame] | 3735 | goto err_powerdown; |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3736 | /* Check if this device supports multiband. */ |
| 3737 | if (!pdev || |
| 3738 | (pdev->device != 0x4312 && |
| 3739 | pdev->device != 0x4319 && pdev->device != 0x4324)) { |
| 3740 | /* No multiband support. */ |
| 3741 | have_aphy = 0; |
| 3742 | have_bphy = 0; |
| 3743 | have_gphy = 0; |
| 3744 | switch (dev->phy.type) { |
| 3745 | case B43_PHYTYPE_A: |
| 3746 | have_aphy = 1; |
| 3747 | break; |
| 3748 | case B43_PHYTYPE_B: |
| 3749 | have_bphy = 1; |
| 3750 | break; |
| 3751 | case B43_PHYTYPE_G: |
| 3752 | have_gphy = 1; |
| 3753 | break; |
| 3754 | default: |
| 3755 | B43_WARN_ON(1); |
| 3756 | } |
| 3757 | } |
| 3758 | dev->phy.gmode = (have_gphy || have_bphy); |
| 3759 | tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0; |
| 3760 | b43_wireless_core_reset(dev, tmp); |
| 3761 | |
| 3762 | err = b43_validate_chipaccess(dev); |
| 3763 | if (err) |
Michael Buesch | 21954c3 | 2007-09-27 15:31:40 +0200 | [diff] [blame] | 3764 | goto err_powerdown; |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3765 | err = b43_setup_modes(dev, have_aphy, have_bphy, have_gphy); |
| 3766 | if (err) |
Michael Buesch | 21954c3 | 2007-09-27 15:31:40 +0200 | [diff] [blame] | 3767 | goto err_powerdown; |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3768 | |
| 3769 | /* Now set some default "current_dev" */ |
| 3770 | if (!wl->current_dev) |
| 3771 | wl->current_dev = dev; |
| 3772 | INIT_WORK(&dev->restart_work, b43_chip_reset); |
| 3773 | |
Michael Buesch | 8e9f752 | 2007-09-27 21:35:34 +0200 | [diff] [blame] | 3774 | b43_radio_turn_off(dev, 1); |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3775 | b43_switch_analog(dev, 0); |
| 3776 | ssb_device_disable(dev->dev, 0); |
| 3777 | ssb_bus_may_powerdown(bus); |
| 3778 | |
| 3779 | out: |
| 3780 | return err; |
| 3781 | |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3782 | err_powerdown: |
| 3783 | ssb_bus_may_powerdown(bus); |
| 3784 | return err; |
| 3785 | } |
| 3786 | |
| 3787 | static void b43_one_core_detach(struct ssb_device *dev) |
| 3788 | { |
| 3789 | struct b43_wldev *wldev; |
| 3790 | struct b43_wl *wl; |
| 3791 | |
| 3792 | wldev = ssb_get_drvdata(dev); |
| 3793 | wl = wldev->wl; |
| 3794 | cancel_work_sync(&wldev->restart_work); |
| 3795 | b43_debugfs_remove_device(wldev); |
| 3796 | b43_wireless_core_detach(wldev); |
| 3797 | list_del(&wldev->list); |
| 3798 | wl->nr_devs--; |
| 3799 | ssb_set_drvdata(dev, NULL); |
| 3800 | kfree(wldev); |
| 3801 | } |
| 3802 | |
| 3803 | static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl) |
| 3804 | { |
| 3805 | struct b43_wldev *wldev; |
| 3806 | struct pci_dev *pdev; |
| 3807 | int err = -ENOMEM; |
| 3808 | |
| 3809 | if (!list_empty(&wl->devlist)) { |
| 3810 | /* We are not the first core on this chip. */ |
| 3811 | pdev = dev->bus->host_pci; |
| 3812 | /* Only special chips support more than one wireless |
| 3813 | * core, although some of the other chips have more than |
| 3814 | * one wireless core as well. Check for this and |
| 3815 | * bail out early. |
| 3816 | */ |
| 3817 | if (!pdev || |
| 3818 | ((pdev->device != 0x4321) && |
| 3819 | (pdev->device != 0x4313) && (pdev->device != 0x431A))) { |
| 3820 | b43dbg(wl, "Ignoring unconnected 802.11 core\n"); |
| 3821 | return -ENODEV; |
| 3822 | } |
| 3823 | } |
| 3824 | |
| 3825 | wldev = kzalloc(sizeof(*wldev), GFP_KERNEL); |
| 3826 | if (!wldev) |
| 3827 | goto out; |
| 3828 | |
| 3829 | wldev->dev = dev; |
| 3830 | wldev->wl = wl; |
| 3831 | b43_set_status(wldev, B43_STAT_UNINIT); |
| 3832 | wldev->bad_frames_preempt = modparam_bad_frames_preempt; |
| 3833 | tasklet_init(&wldev->isr_tasklet, |
| 3834 | (void (*)(unsigned long))b43_interrupt_tasklet, |
| 3835 | (unsigned long)wldev); |
| 3836 | if (modparam_pio) |
| 3837 | wldev->__using_pio = 1; |
| 3838 | INIT_LIST_HEAD(&wldev->list); |
| 3839 | |
| 3840 | err = b43_wireless_core_attach(wldev); |
| 3841 | if (err) |
| 3842 | goto err_kfree_wldev; |
| 3843 | |
| 3844 | list_add(&wldev->list, &wl->devlist); |
| 3845 | wl->nr_devs++; |
| 3846 | ssb_set_drvdata(dev, wldev); |
| 3847 | b43_debugfs_add_device(wldev); |
| 3848 | |
| 3849 | out: |
| 3850 | return err; |
| 3851 | |
| 3852 | err_kfree_wldev: |
| 3853 | kfree(wldev); |
| 3854 | return err; |
| 3855 | } |
| 3856 | |
| 3857 | static void b43_sprom_fixup(struct ssb_bus *bus) |
| 3858 | { |
| 3859 | /* boardflags workarounds */ |
| 3860 | if (bus->boardinfo.vendor == SSB_BOARDVENDOR_DELL && |
| 3861 | bus->chip_id == 0x4301 && bus->boardinfo.rev == 0x74) |
| 3862 | bus->sprom.r1.boardflags_lo |= B43_BFL_BTCOEXIST; |
| 3863 | if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE && |
| 3864 | bus->boardinfo.type == 0x4E && bus->boardinfo.rev > 0x40) |
| 3865 | bus->sprom.r1.boardflags_lo |= B43_BFL_PACTRL; |
| 3866 | |
| 3867 | /* Handle case when gain is not set in sprom */ |
| 3868 | if (bus->sprom.r1.antenna_gain_a == 0xFF) |
| 3869 | bus->sprom.r1.antenna_gain_a = 2; |
| 3870 | if (bus->sprom.r1.antenna_gain_bg == 0xFF) |
| 3871 | bus->sprom.r1.antenna_gain_bg = 2; |
| 3872 | |
| 3873 | /* Convert Antennagain values to Q5.2 */ |
| 3874 | bus->sprom.r1.antenna_gain_a <<= 2; |
| 3875 | bus->sprom.r1.antenna_gain_bg <<= 2; |
| 3876 | } |
| 3877 | |
| 3878 | static void b43_wireless_exit(struct ssb_device *dev, struct b43_wl *wl) |
| 3879 | { |
| 3880 | struct ieee80211_hw *hw = wl->hw; |
| 3881 | |
| 3882 | ssb_set_devtypedata(dev, NULL); |
| 3883 | ieee80211_free_hw(hw); |
| 3884 | } |
| 3885 | |
| 3886 | static int b43_wireless_init(struct ssb_device *dev) |
| 3887 | { |
| 3888 | struct ssb_sprom *sprom = &dev->bus->sprom; |
| 3889 | struct ieee80211_hw *hw; |
| 3890 | struct b43_wl *wl; |
| 3891 | int err = -ENOMEM; |
| 3892 | |
| 3893 | b43_sprom_fixup(dev->bus); |
| 3894 | |
| 3895 | hw = ieee80211_alloc_hw(sizeof(*wl), &b43_hw_ops); |
| 3896 | if (!hw) { |
| 3897 | b43err(NULL, "Could not allocate ieee80211 device\n"); |
| 3898 | goto out; |
| 3899 | } |
| 3900 | |
| 3901 | /* fill hw info */ |
Johannes Berg | 4150c57 | 2007-09-17 01:29:23 -0400 | [diff] [blame] | 3902 | hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE; |
Michael Buesch | e4d6b79 | 2007-09-18 15:39:42 -0400 | [diff] [blame] | 3903 | hw->max_signal = 100; |
| 3904 | hw->max_rssi = -110; |
| 3905 | hw->max_noise = -110; |
| 3906 | hw->queues = 1; /* FIXME: hardware has more queues */ |
| 3907 | SET_IEEE80211_DEV(hw, dev->dev); |
| 3908 | if (is_valid_ether_addr(sprom->r1.et1mac)) |
| 3909 | SET_IEEE80211_PERM_ADDR(hw, sprom->r1.et1mac); |
| 3910 | else |
| 3911 | SET_IEEE80211_PERM_ADDR(hw, sprom->r1.il0mac); |
| 3912 | |
| 3913 | /* Get and initialize struct b43_wl */ |
| 3914 | wl = hw_to_b43_wl(hw); |
| 3915 | memset(wl, 0, sizeof(*wl)); |
| 3916 | wl->hw = hw; |
| 3917 | spin_lock_init(&wl->irq_lock); |
| 3918 | spin_lock_init(&wl->leds_lock); |
| 3919 | mutex_init(&wl->mutex); |
| 3920 | INIT_LIST_HEAD(&wl->devlist); |
| 3921 | |
| 3922 | ssb_set_devtypedata(dev, wl); |
| 3923 | b43info(wl, "Broadcom %04X WLAN found\n", dev->bus->chip_id); |
| 3924 | err = 0; |
| 3925 | out: |
| 3926 | return err; |
| 3927 | } |
| 3928 | |
| 3929 | static int b43_probe(struct ssb_device *dev, const struct ssb_device_id *id) |
| 3930 | { |
| 3931 | struct b43_wl *wl; |
| 3932 | int err; |
| 3933 | int first = 0; |
| 3934 | |
| 3935 | wl = ssb_get_devtypedata(dev); |
| 3936 | if (!wl) { |
| 3937 | /* Probing the first core. Must setup common struct b43_wl */ |
| 3938 | first = 1; |
| 3939 | err = b43_wireless_init(dev); |
| 3940 | if (err) |
| 3941 | goto out; |
| 3942 | wl = ssb_get_devtypedata(dev); |
| 3943 | B43_WARN_ON(!wl); |
| 3944 | } |
| 3945 | err = b43_one_core_attach(dev, wl); |
| 3946 | if (err) |
| 3947 | goto err_wireless_exit; |
| 3948 | |
| 3949 | if (first) { |
| 3950 | err = ieee80211_register_hw(wl->hw); |
| 3951 | if (err) |
| 3952 | goto err_one_core_detach; |
| 3953 | } |
| 3954 | |
| 3955 | out: |
| 3956 | return err; |
| 3957 | |
| 3958 | err_one_core_detach: |
| 3959 | b43_one_core_detach(dev); |
| 3960 | err_wireless_exit: |
| 3961 | if (first) |
| 3962 | b43_wireless_exit(dev, wl); |
| 3963 | return err; |
| 3964 | } |
| 3965 | |
| 3966 | static void b43_remove(struct ssb_device *dev) |
| 3967 | { |
| 3968 | struct b43_wl *wl = ssb_get_devtypedata(dev); |
| 3969 | struct b43_wldev *wldev = ssb_get_drvdata(dev); |
| 3970 | |
| 3971 | B43_WARN_ON(!wl); |
| 3972 | if (wl->current_dev == wldev) |
| 3973 | ieee80211_unregister_hw(wl->hw); |
| 3974 | |
| 3975 | b43_one_core_detach(dev); |
| 3976 | |
| 3977 | if (list_empty(&wl->devlist)) { |
| 3978 | /* Last core on the chip unregistered. |
| 3979 | * We can destroy common struct b43_wl. |
| 3980 | */ |
| 3981 | b43_wireless_exit(dev, wl); |
| 3982 | } |
| 3983 | } |
| 3984 | |
| 3985 | /* Perform a hardware reset. This can be called from any context. */ |
| 3986 | void b43_controller_restart(struct b43_wldev *dev, const char *reason) |
| 3987 | { |
| 3988 | /* Must avoid requeueing, if we are in shutdown. */ |
| 3989 | if (b43_status(dev) < B43_STAT_INITIALIZED) |
| 3990 | return; |
| 3991 | b43info(dev->wl, "Controller RESET (%s) ...\n", reason); |
| 3992 | queue_work(dev->wl->hw->workqueue, &dev->restart_work); |
| 3993 | } |
| 3994 | |
| 3995 | #ifdef CONFIG_PM |
| 3996 | |
| 3997 | static int b43_suspend(struct ssb_device *dev, pm_message_t state) |
| 3998 | { |
| 3999 | struct b43_wldev *wldev = ssb_get_drvdata(dev); |
| 4000 | struct b43_wl *wl = wldev->wl; |
| 4001 | |
| 4002 | b43dbg(wl, "Suspending...\n"); |
| 4003 | |
| 4004 | mutex_lock(&wl->mutex); |
| 4005 | wldev->suspend_init_status = b43_status(wldev); |
| 4006 | if (wldev->suspend_init_status >= B43_STAT_STARTED) |
| 4007 | b43_wireless_core_stop(wldev); |
| 4008 | if (wldev->suspend_init_status >= B43_STAT_INITIALIZED) |
| 4009 | b43_wireless_core_exit(wldev); |
| 4010 | mutex_unlock(&wl->mutex); |
| 4011 | |
| 4012 | b43dbg(wl, "Device suspended.\n"); |
| 4013 | |
| 4014 | return 0; |
| 4015 | } |
| 4016 | |
| 4017 | static int b43_resume(struct ssb_device *dev) |
| 4018 | { |
| 4019 | struct b43_wldev *wldev = ssb_get_drvdata(dev); |
| 4020 | struct b43_wl *wl = wldev->wl; |
| 4021 | int err = 0; |
| 4022 | |
| 4023 | b43dbg(wl, "Resuming...\n"); |
| 4024 | |
| 4025 | mutex_lock(&wl->mutex); |
| 4026 | if (wldev->suspend_init_status >= B43_STAT_INITIALIZED) { |
| 4027 | err = b43_wireless_core_init(wldev); |
| 4028 | if (err) { |
| 4029 | b43err(wl, "Resume failed at core init\n"); |
| 4030 | goto out; |
| 4031 | } |
| 4032 | } |
| 4033 | if (wldev->suspend_init_status >= B43_STAT_STARTED) { |
| 4034 | err = b43_wireless_core_start(wldev); |
| 4035 | if (err) { |
| 4036 | b43_wireless_core_exit(wldev); |
| 4037 | b43err(wl, "Resume failed at core start\n"); |
| 4038 | goto out; |
| 4039 | } |
| 4040 | } |
| 4041 | mutex_unlock(&wl->mutex); |
| 4042 | |
| 4043 | b43dbg(wl, "Device resumed.\n"); |
| 4044 | out: |
| 4045 | return err; |
| 4046 | } |
| 4047 | |
| 4048 | #else /* CONFIG_PM */ |
| 4049 | # define b43_suspend NULL |
| 4050 | # define b43_resume NULL |
| 4051 | #endif /* CONFIG_PM */ |
| 4052 | |
| 4053 | static struct ssb_driver b43_ssb_driver = { |
| 4054 | .name = KBUILD_MODNAME, |
| 4055 | .id_table = b43_ssb_tbl, |
| 4056 | .probe = b43_probe, |
| 4057 | .remove = b43_remove, |
| 4058 | .suspend = b43_suspend, |
| 4059 | .resume = b43_resume, |
| 4060 | }; |
| 4061 | |
| 4062 | static int __init b43_init(void) |
| 4063 | { |
| 4064 | int err; |
| 4065 | |
| 4066 | b43_debugfs_init(); |
| 4067 | err = b43_pcmcia_init(); |
| 4068 | if (err) |
| 4069 | goto err_dfs_exit; |
| 4070 | err = ssb_driver_register(&b43_ssb_driver); |
| 4071 | if (err) |
| 4072 | goto err_pcmcia_exit; |
| 4073 | |
| 4074 | return err; |
| 4075 | |
| 4076 | err_pcmcia_exit: |
| 4077 | b43_pcmcia_exit(); |
| 4078 | err_dfs_exit: |
| 4079 | b43_debugfs_exit(); |
| 4080 | return err; |
| 4081 | } |
| 4082 | |
| 4083 | static void __exit b43_exit(void) |
| 4084 | { |
| 4085 | ssb_driver_unregister(&b43_ssb_driver); |
| 4086 | b43_pcmcia_exit(); |
| 4087 | b43_debugfs_exit(); |
| 4088 | } |
| 4089 | |
| 4090 | module_init(b43_init) |
| 4091 | module_exit(b43_exit) |