blob: 0c62fe31a40e20ead5c0709757f177c738376574 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*======================================================================
2
3 Device driver for the PCMCIA control functionality of StrongARM
4 SA-1100 microprocessors.
5
6 The contents of this file are subject to the Mozilla Public
7 License Version 1.1 (the "License"); you may not use this file
8 except in compliance with the License. You may obtain a copy of
9 the License at http://www.mozilla.org/MPL/
10
11 Software distributed under the License is distributed on an "AS
12 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
13 implied. See the License for the specific language governing
14 rights and limitations under the License.
15
16 The initial developer of the original code is John G. Dorsey
17 <john+@cs.cmu.edu>. Portions created by John G. Dorsey are
18 Copyright (C) 1999 John G. Dorsey. All Rights Reserved.
19
20 Alternatively, the contents of this file may be used under the
21 terms of the GNU Public License version 2 (the "GPL"), in which
22 case the provisions of the GPL are applicable instead of the
23 above. If you wish to allow the use of your version of this file
24 only under the terms of the GPL and not to allow others to use
25 your version of this file under the MPL, indicate your decision
26 by deleting the provisions above and replace them with the notice
27 and other provisions required by the GPL. If you do not delete
28 the provisions above, a recipient may use your version of this
29 file under either the MPL or the GPL.
30
31======================================================================*/
32
33#include <linux/module.h>
34#include <linux/init.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070035#include <linux/cpufreq.h>
36#include <linux/ioport.h>
37#include <linux/kernel.h>
38#include <linux/spinlock.h>
Russell King99730222009-03-25 10:21:35 +000039#include <linux/io.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090040#include <linux/slab.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070041
Russell Kinga09e64f2008-08-05 16:14:15 +010042#include <mach/hardware.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070043#include <asm/irq.h>
44#include <asm/system.h>
45
46#include "soc_common.h"
47#include "sa11xx_base.h"
48
49
50/*
51 * sa1100_pcmcia_default_mecr_timing
52 * ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
53 *
54 * Calculate MECR clock wait states for given CPU clock
55 * speed and command wait state. This function can be over-
56 * written by a board specific version.
57 *
58 * The default is to simply calculate the BS values as specified in
59 * the INTEL SA1100 development manual
60 * "Expansion Memory (PCMCIA) Configuration Register (MECR)"
61 * that's section 10.2.5 in _my_ version of the manual ;)
62 */
63static unsigned int
64sa1100_pcmcia_default_mecr_timing(struct soc_pcmcia_socket *skt,
65 unsigned int cpu_speed,
66 unsigned int cmd_time)
67{
68 return sa1100_pcmcia_mecr_bs(cmd_time, cpu_speed);
69}
70
71/* sa1100_pcmcia_set_mecr()
72 * ^^^^^^^^^^^^^^^^^^^^^^^^
73 *
74 * set MECR value for socket <sock> based on this sockets
75 * io, mem and attribute space access speed.
76 * Call board specific BS value calculation to allow boards
77 * to tweak the BS values.
78 */
79static int
80sa1100_pcmcia_set_mecr(struct soc_pcmcia_socket *skt, unsigned int cpu_clock)
81{
82 struct soc_pcmcia_timing timing;
83 u32 mecr, old_mecr;
84 unsigned long flags;
85 unsigned int bs_io, bs_mem, bs_attr;
86
87 soc_common_pcmcia_get_timing(skt, &timing);
88
89 bs_io = skt->ops->get_timing(skt, cpu_clock, timing.io);
90 bs_mem = skt->ops->get_timing(skt, cpu_clock, timing.mem);
91 bs_attr = skt->ops->get_timing(skt, cpu_clock, timing.attr);
92
93 local_irq_save(flags);
94
95 old_mecr = mecr = MECR;
96 MECR_FAST_SET(mecr, skt->nr, 0);
97 MECR_BSIO_SET(mecr, skt->nr, bs_io);
98 MECR_BSA_SET(mecr, skt->nr, bs_attr);
99 MECR_BSM_SET(mecr, skt->nr, bs_mem);
100 if (old_mecr != mecr)
101 MECR = mecr;
102
103 local_irq_restore(flags);
104
105 debug(skt, 2, "FAST %X BSM %X BSA %X BSIO %X\n",
106 MECR_FAST_GET(mecr, skt->nr),
107 MECR_BSM_GET(mecr, skt->nr), MECR_BSA_GET(mecr, skt->nr),
108 MECR_BSIO_GET(mecr, skt->nr));
109
110 return 0;
111}
112
113#ifdef CONFIG_CPU_FREQ
114static int
115sa1100_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
116 unsigned long val,
117 struct cpufreq_freqs *freqs)
118{
119 switch (val) {
120 case CPUFREQ_PRECHANGE:
121 if (freqs->new > freqs->old)
122 sa1100_pcmcia_set_mecr(skt, freqs->new);
123 break;
124
125 case CPUFREQ_POSTCHANGE:
126 if (freqs->new < freqs->old)
127 sa1100_pcmcia_set_mecr(skt, freqs->new);
128 break;
129 case CPUFREQ_RESUMECHANGE:
130 sa1100_pcmcia_set_mecr(skt, freqs->new);
131 break;
132 }
133
134 return 0;
135}
136
137#endif
138
139static int
140sa1100_pcmcia_set_timing(struct soc_pcmcia_socket *skt)
141{
142 return sa1100_pcmcia_set_mecr(skt, cpufreq_get(0));
143}
144
145static int
146sa1100_pcmcia_show_timing(struct soc_pcmcia_socket *skt, char *buf)
147{
148 struct soc_pcmcia_timing timing;
149 unsigned int clock = cpufreq_get(0);
150 unsigned long mecr = MECR;
151 char *p = buf;
152
153 soc_common_pcmcia_get_timing(skt, &timing);
154
155 p+=sprintf(p, "I/O : %u (%u)\n", timing.io,
156 sa1100_pcmcia_cmd_time(clock, MECR_BSIO_GET(mecr, skt->nr)));
157
158 p+=sprintf(p, "attribute: %u (%u)\n", timing.attr,
159 sa1100_pcmcia_cmd_time(clock, MECR_BSA_GET(mecr, skt->nr)));
160
161 p+=sprintf(p, "common : %u (%u)\n", timing.mem,
162 sa1100_pcmcia_cmd_time(clock, MECR_BSM_GET(mecr, skt->nr)));
163
164 return p - buf;
165}
166
Eric Miaob393c692009-01-19 17:34:27 +0800167static const char *skt_names[] = {
168 "PCMCIA socket 0",
169 "PCMCIA socket 1",
170};
171
172#define SKT_DEV_INFO_SIZE(n) \
173 (sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket))
174
Russell King - ARM Linux701a5dc2009-03-29 19:42:44 +0100175int sa11xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt)
Russell King - ARM Linuxda4f0072009-03-29 19:23:42 +0100176{
177 skt->res_skt.start = _PCMCIA(skt->nr);
178 skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1;
179 skt->res_skt.name = skt_names[skt->nr];
180 skt->res_skt.flags = IORESOURCE_MEM;
181
182 skt->res_io.start = _PCMCIAIO(skt->nr);
183 skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1;
184 skt->res_io.name = "io";
185 skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
186
187 skt->res_mem.start = _PCMCIAMem(skt->nr);
188 skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1;
189 skt->res_mem.name = "memory";
190 skt->res_mem.flags = IORESOURCE_MEM;
191
192 skt->res_attr.start = _PCMCIAAttr(skt->nr);
193 skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1;
194 skt->res_attr.name = "attribute";
195 skt->res_attr.flags = IORESOURCE_MEM;
196
197 return soc_pcmcia_add_one(skt);
198}
Russell King - ARM Linux701a5dc2009-03-29 19:42:44 +0100199EXPORT_SYMBOL(sa11xx_drv_pcmcia_add_one);
Russell King - ARM Linuxda4f0072009-03-29 19:23:42 +0100200
Russell King - ARM Linux701a5dc2009-03-29 19:42:44 +0100201void sa11xx_drv_pcmcia_ops(struct pcmcia_low_level *ops)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700202{
203 /*
204 * set default MECR calculation if the board specific
205 * code did not specify one...
206 */
207 if (!ops->get_timing)
208 ops->get_timing = sa1100_pcmcia_default_mecr_timing;
209
210 /* Provide our SA11x0 specific timing routines. */
211 ops->set_timing = sa1100_pcmcia_set_timing;
212 ops->show_timing = sa1100_pcmcia_show_timing;
213#ifdef CONFIG_CPU_FREQ
214 ops->frequency_change = sa1100_pcmcia_frequency_change;
215#endif
Russell King - ARM Linux701a5dc2009-03-29 19:42:44 +0100216}
217EXPORT_SYMBOL(sa11xx_drv_pcmcia_ops);
218
219int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
220 int first, int nr)
221{
222 struct skt_dev_info *sinfo;
223 struct soc_pcmcia_socket *skt;
224 int i, ret = 0;
225
226 sa11xx_drv_pcmcia_ops(ops);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700227
Russell King - ARM Linuxda4f0072009-03-29 19:23:42 +0100228 sinfo = kzalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL);
229 if (!sinfo)
230 return -ENOMEM;
231
232 sinfo->nskt = nr;
233
Uwe Kleine-König421f91d2010-06-11 12:17:00 +0200234 /* Initialize processor specific parameters */
Russell King - ARM Linuxda4f0072009-03-29 19:23:42 +0100235 for (i = 0; i < nr; i++) {
236 skt = &sinfo->skt[i];
237
238 skt->nr = first + i;
Russell King - ARM Linuxda4f0072009-03-29 19:23:42 +0100239 skt->ops = ops;
240 skt->socket.owner = ops->owner;
241 skt->socket.dev.parent = dev;
Russell King - ARM Linux66024db2009-03-29 22:45:26 +0100242 skt->socket.pci_irq = NO_IRQ;
Russell King - ARM Linuxda4f0072009-03-29 19:23:42 +0100243
244 ret = sa11xx_drv_pcmcia_add_one(skt);
245 if (ret)
246 break;
247 }
248
249 if (ret) {
250 while (--i >= 0)
251 soc_pcmcia_remove_one(&sinfo->skt[i]);
252 kfree(sinfo);
253 } else {
254 dev_set_drvdata(dev, sinfo);
255 }
256
257 return ret;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700258}
259EXPORT_SYMBOL(sa11xx_drv_pcmcia_probe);
260
261static int __init sa11xx_pcmcia_init(void)
262{
263 return 0;
264}
Richard Purdief36598a2005-09-03 19:39:25 +0100265fs_initcall(sa11xx_pcmcia_init);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700266
267static void __exit sa11xx_pcmcia_exit(void) {}
268
269module_exit(sa11xx_pcmcia_exit);
270
271MODULE_AUTHOR("John Dorsey <john+@cs.cmu.edu>");
272MODULE_DESCRIPTION("Linux PCMCIA Card Services: SA-11xx core socket driver");
273MODULE_LICENSE("Dual MPL/GPL");