blob: 009c08fe5d69289153e6719ba89dc2d4e3963cbc [file] [log] [blame]
Alan Cox0d88a102006-01-18 17:44:10 -08001/*
2 * Intel D82875P Memory Controller kernel module
3 * (C) 2003 Linux Networx (http://lnxi.com)
4 * This file may be distributed under the terms of the
5 * GNU General Public License.
6 *
7 * Written by Thayne Harbaugh
8 * Contributors:
9 * Wang Zhenyu at intel.com
10 *
11 * $Id: edac_i82875p.c,v 1.5.2.11 2005/10/05 00:43:44 dsp_llnl Exp $
12 *
13 * Note: E7210 appears same as D82875P - zhenyu.z.wang at intel.com
14 */
15
16
17#include <linux/config.h>
18#include <linux/module.h>
19#include <linux/init.h>
20
21#include <linux/pci.h>
22#include <linux/pci_ids.h>
23
24#include <linux/slab.h>
25
26#include "edac_mc.h"
27
28
29#ifndef PCI_DEVICE_ID_INTEL_82875_0
30#define PCI_DEVICE_ID_INTEL_82875_0 0x2578
31#endif /* PCI_DEVICE_ID_INTEL_82875_0 */
32
33#ifndef PCI_DEVICE_ID_INTEL_82875_6
34#define PCI_DEVICE_ID_INTEL_82875_6 0x257e
35#endif /* PCI_DEVICE_ID_INTEL_82875_6 */
36
37
38/* four csrows in dual channel, eight in single channel */
39#define I82875P_NR_CSROWS(nr_chans) (8/(nr_chans))
40
41
42/* Intel 82875p register addresses - device 0 function 0 - DRAM Controller */
43#define I82875P_EAP 0x58 /* Error Address Pointer (32b)
44 *
45 * 31:12 block address
46 * 11:0 reserved
47 */
48
49#define I82875P_DERRSYN 0x5c /* DRAM Error Syndrome (8b)
50 *
51 * 7:0 DRAM ECC Syndrome
52 */
53
54#define I82875P_DES 0x5d /* DRAM Error Status (8b)
55 *
56 * 7:1 reserved
57 * 0 Error channel 0/1
58 */
59
60#define I82875P_ERRSTS 0xc8 /* Error Status Register (16b)
61 *
62 * 15:10 reserved
63 * 9 non-DRAM lock error (ndlock)
64 * 8 Sftwr Generated SMI
65 * 7 ECC UE
66 * 6 reserved
67 * 5 MCH detects unimplemented cycle
68 * 4 AGP access outside GA
69 * 3 Invalid AGP access
70 * 2 Invalid GA translation table
71 * 1 Unsupported AGP command
72 * 0 ECC CE
73 */
74
75#define I82875P_ERRCMD 0xca /* Error Command (16b)
76 *
77 * 15:10 reserved
78 * 9 SERR on non-DRAM lock
79 * 8 SERR on ECC UE
80 * 7 SERR on ECC CE
81 * 6 target abort on high exception
82 * 5 detect unimplemented cyc
83 * 4 AGP access outside of GA
84 * 3 SERR on invalid AGP access
85 * 2 invalid translation table
86 * 1 SERR on unsupported AGP command
87 * 0 reserved
88 */
89
90
91/* Intel 82875p register addresses - device 6 function 0 - DRAM Controller */
92#define I82875P_PCICMD6 0x04 /* PCI Command Register (16b)
93 *
94 * 15:10 reserved
95 * 9 fast back-to-back - ro 0
96 * 8 SERR enable - ro 0
97 * 7 addr/data stepping - ro 0
98 * 6 parity err enable - ro 0
99 * 5 VGA palette snoop - ro 0
100 * 4 mem wr & invalidate - ro 0
101 * 3 special cycle - ro 0
102 * 2 bus master - ro 0
103 * 1 mem access dev6 - 0(dis),1(en)
104 * 0 IO access dev3 - 0(dis),1(en)
105 */
106
107#define I82875P_BAR6 0x10 /* Mem Delays Base ADDR Reg (32b)
108 *
109 * 31:12 mem base addr [31:12]
110 * 11:4 address mask - ro 0
111 * 3 prefetchable - ro 0(non),1(pre)
112 * 2:1 mem type - ro 0
113 * 0 mem space - ro 0
114 */
115
116/* Intel 82875p MMIO register space - device 0 function 0 - MMR space */
117
118#define I82875P_DRB_SHIFT 26 /* 64MiB grain */
119#define I82875P_DRB 0x00 /* DRAM Row Boundary (8b x 8)
120 *
121 * 7 reserved
122 * 6:0 64MiB row boundary addr
123 */
124
125#define I82875P_DRA 0x10 /* DRAM Row Attribute (4b x 8)
126 *
127 * 7 reserved
128 * 6:4 row attr row 1
129 * 3 reserved
130 * 2:0 row attr row 0
131 *
132 * 000 = 4KiB
133 * 001 = 8KiB
134 * 010 = 16KiB
135 * 011 = 32KiB
136 */
137
138#define I82875P_DRC 0x68 /* DRAM Controller Mode (32b)
139 *
140 * 31:30 reserved
141 * 29 init complete
142 * 28:23 reserved
143 * 22:21 nr chan 00=1,01=2
144 * 20 reserved
145 * 19:18 Data Integ Mode 00=none,01=ecc
146 * 17:11 reserved
147 * 10:8 refresh mode
148 * 7 reserved
149 * 6:4 mode select
150 * 3:2 reserved
151 * 1:0 DRAM type 01=DDR
152 */
153
154
155enum i82875p_chips {
156 I82875P = 0,
157};
158
159
160struct i82875p_pvt {
161 struct pci_dev *ovrfl_pdev;
162 void *ovrfl_window;
163};
164
165
166struct i82875p_dev_info {
167 const char *ctl_name;
168};
169
170
171struct i82875p_error_info {
172 u16 errsts;
173 u32 eap;
174 u8 des;
175 u8 derrsyn;
176 u16 errsts2;
177};
178
179
180static const struct i82875p_dev_info i82875p_devs[] = {
181 [I82875P] = {
182 .ctl_name = "i82875p"},
183};
184
185static struct pci_dev *mci_pdev = NULL; /* init dev: in case that AGP code
186 has already registered driver */
187static int i82875p_registered = 1;
188
189static void i82875p_get_error_info (struct mem_ctl_info *mci,
190 struct i82875p_error_info *info)
191{
192 /*
193 * This is a mess because there is no atomic way to read all the
194 * registers at once and the registers can transition from CE being
195 * overwritten by UE.
196 */
197 pci_read_config_word(mci->pdev, I82875P_ERRSTS, &info->errsts);
198 pci_read_config_dword(mci->pdev, I82875P_EAP, &info->eap);
199 pci_read_config_byte(mci->pdev, I82875P_DES, &info->des);
200 pci_read_config_byte(mci->pdev, I82875P_DERRSYN, &info->derrsyn);
201 pci_read_config_word(mci->pdev, I82875P_ERRSTS, &info->errsts2);
202
203 pci_write_bits16(mci->pdev, I82875P_ERRSTS, 0x0081, 0x0081);
204
205 /*
206 * If the error is the same then we can for both reads then
207 * the first set of reads is valid. If there is a change then
208 * there is a CE no info and the second set of reads is valid
209 * and should be UE info.
210 */
211 if (!(info->errsts2 & 0x0081))
212 return;
213 if ((info->errsts ^ info->errsts2) & 0x0081) {
214 pci_read_config_dword(mci->pdev, I82875P_EAP, &info->eap);
215 pci_read_config_byte(mci->pdev, I82875P_DES, &info->des);
216 pci_read_config_byte(mci->pdev, I82875P_DERRSYN,
217 &info->derrsyn);
218 }
219}
220
221static int i82875p_process_error_info (struct mem_ctl_info *mci,
222 struct i82875p_error_info *info, int handle_errors)
223{
224 int row, multi_chan;
225
226 multi_chan = mci->csrows[0].nr_channels - 1;
227
228 if (!(info->errsts2 & 0x0081))
229 return 0;
230
231 if (!handle_errors)
232 return 1;
233
234 if ((info->errsts ^ info->errsts2) & 0x0081) {
235 edac_mc_handle_ce_no_info(mci, "UE overwrote CE");
236 info->errsts = info->errsts2;
237 }
238
239 info->eap >>= PAGE_SHIFT;
240 row = edac_mc_find_csrow_by_page(mci, info->eap);
241
242 if (info->errsts & 0x0080)
243 edac_mc_handle_ue(mci, info->eap, 0, row, "i82875p UE");
244 else
245 edac_mc_handle_ce(mci, info->eap, 0, info->derrsyn, row,
246 multi_chan ? (info->des & 0x1) : 0,
247 "i82875p CE");
248
249 return 1;
250}
251
252
253static void i82875p_check(struct mem_ctl_info *mci)
254{
255 struct i82875p_error_info info;
256
257 debugf1("MC%d: " __FILE__ ": %s()\n", mci->mc_idx, __func__);
258 i82875p_get_error_info(mci, &info);
259 i82875p_process_error_info(mci, &info, 1);
260}
261
262
263#ifdef CONFIG_PROC_FS
264extern int pci_proc_attach_device(struct pci_dev *);
265#endif
266
267static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
268{
269 int rc = -ENODEV;
270 int index;
271 struct mem_ctl_info *mci = NULL;
272 struct i82875p_pvt *pvt = NULL;
273 unsigned long last_cumul_size;
274 struct pci_dev *ovrfl_pdev;
275 void __iomem *ovrfl_window = NULL;
276
277 u32 drc;
278 u32 drc_chan; /* Number of channels 0=1chan,1=2chan */
279 u32 nr_chans;
280 u32 drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */
281
282 debugf0("MC: " __FILE__ ": %s()\n", __func__);
283
284 ovrfl_pdev = pci_find_device(PCI_VEND_DEV(INTEL, 82875_6), NULL);
285
286 if (!ovrfl_pdev) {
287 /*
288 * Intel tells BIOS developers to hide device 6 which
289 * configures the overflow device access containing
290 * the DRBs - this is where we expose device 6.
291 * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm
292 */
293 pci_write_bits8(pdev, 0xf4, 0x2, 0x2);
294 ovrfl_pdev =
295 pci_scan_single_device(pdev->bus, PCI_DEVFN(6, 0));
296 if (!ovrfl_pdev)
297 goto fail;
298 }
299#ifdef CONFIG_PROC_FS
300 if (!ovrfl_pdev->procent && pci_proc_attach_device(ovrfl_pdev)) {
301 printk(KERN_ERR "MC: " __FILE__
302 ": %s(): Failed to attach overflow device\n",
303 __func__);
304 goto fail;
305 }
306#endif /* CONFIG_PROC_FS */
307 if (pci_enable_device(ovrfl_pdev)) {
308 printk(KERN_ERR "MC: " __FILE__
309 ": %s(): Failed to enable overflow device\n",
310 __func__);
311 goto fail;
312 }
313
314 if (pci_request_regions(ovrfl_pdev, pci_name(ovrfl_pdev))) {
315#ifdef CORRECT_BIOS
316 goto fail;
317#endif
318 }
319 /* cache is irrelevant for PCI bus reads/writes */
320 ovrfl_window = ioremap_nocache(pci_resource_start(ovrfl_pdev, 0),
321 pci_resource_len(ovrfl_pdev, 0));
322
323 if (!ovrfl_window) {
324 printk(KERN_ERR "MC: " __FILE__
325 ": %s(): Failed to ioremap bar6\n", __func__);
326 goto fail;
327 }
328
329 /* need to find out the number of channels */
330 drc = readl(ovrfl_window + I82875P_DRC);
331 drc_chan = ((drc >> 21) & 0x1);
332 nr_chans = drc_chan + 1;
333 drc_ddim = (drc >> 18) & 0x1;
334
335 mci = edac_mc_alloc(sizeof(*pvt), I82875P_NR_CSROWS(nr_chans),
336 nr_chans);
337
338 if (!mci) {
339 rc = -ENOMEM;
340 goto fail;
341 }
342
343 debugf3("MC: " __FILE__ ": %s(): init mci\n", __func__);
344
345 mci->pdev = pdev;
346 mci->mtype_cap = MEM_FLAG_DDR;
347
348 mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
349 mci->edac_cap = EDAC_FLAG_UNKNOWN;
350 /* adjust FLAGS */
351
352 mci->mod_name = BS_MOD_STR;
353 mci->mod_ver = "$Revision: 1.5.2.11 $";
354 mci->ctl_name = i82875p_devs[dev_idx].ctl_name;
355 mci->edac_check = i82875p_check;
356 mci->ctl_page_to_phys = NULL;
357
358 debugf3("MC: " __FILE__ ": %s(): init pvt\n", __func__);
359
360 pvt = (struct i82875p_pvt *) mci->pvt_info;
361 pvt->ovrfl_pdev = ovrfl_pdev;
362 pvt->ovrfl_window = ovrfl_window;
363
364 /*
365 * The dram row boundary (DRB) reg values are boundary address
366 * for each DRAM row with a granularity of 32 or 64MB (single/dual
367 * channel operation). DRB regs are cumulative; therefore DRB7 will
368 * contain the total memory contained in all eight rows.
369 */
370 for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) {
371 u8 value;
372 u32 cumul_size;
373 struct csrow_info *csrow = &mci->csrows[index];
374
375 value = readb(ovrfl_window + I82875P_DRB + index);
376 cumul_size = value << (I82875P_DRB_SHIFT - PAGE_SHIFT);
377 debugf3("MC: " __FILE__ ": %s(): (%d) cumul_size 0x%x\n",
378 __func__, index, cumul_size);
379 if (cumul_size == last_cumul_size)
380 continue; /* not populated */
381
382 csrow->first_page = last_cumul_size;
383 csrow->last_page = cumul_size - 1;
384 csrow->nr_pages = cumul_size - last_cumul_size;
385 last_cumul_size = cumul_size;
386 csrow->grain = 1 << 12; /* I82875P_EAP has 4KiB reolution */
387 csrow->mtype = MEM_DDR;
388 csrow->dtype = DEV_UNKNOWN;
389 csrow->edac_mode = drc_ddim ? EDAC_SECDED : EDAC_NONE;
390 }
391
392 /* clear counters */
393 pci_write_bits16(mci->pdev, I82875P_ERRSTS, 0x0081, 0x0081);
394
395 if (edac_mc_add_mc(mci)) {
396 debugf3("MC: " __FILE__
397 ": %s(): failed edac_mc_add_mc()\n", __func__);
398 goto fail;
399 }
400
401 /* get this far and it's successful */
402 debugf3("MC: " __FILE__ ": %s(): success\n", __func__);
403 return 0;
404
405 fail:
406 if (mci)
407 edac_mc_free(mci);
408
409 if (ovrfl_window)
410 iounmap(ovrfl_window);
411
412 if (ovrfl_pdev) {
413 pci_release_regions(ovrfl_pdev);
414 pci_disable_device(ovrfl_pdev);
415 }
416
417 /* NOTE: the ovrfl proc entry and pci_dev are intentionally left */
418 return rc;
419}
420
421
422/* returns count (>= 0), or negative on error */
423static int __devinit i82875p_init_one(struct pci_dev *pdev,
424 const struct pci_device_id *ent)
425{
426 int rc;
427
428 debugf0("MC: " __FILE__ ": %s()\n", __func__);
429
430 printk(KERN_INFO "i82875p init one\n");
431 if(pci_enable_device(pdev) < 0)
432 return -EIO;
433 rc = i82875p_probe1(pdev, ent->driver_data);
434 if (mci_pdev == NULL)
435 mci_pdev = pci_dev_get(pdev);
436 return rc;
437}
438
439
440static void __devexit i82875p_remove_one(struct pci_dev *pdev)
441{
442 struct mem_ctl_info *mci;
443 struct i82875p_pvt *pvt = NULL;
444
445 debugf0(__FILE__ ": %s()\n", __func__);
446
447 if ((mci = edac_mc_find_mci_by_pdev(pdev)) == NULL)
448 return;
449
450 pvt = (struct i82875p_pvt *) mci->pvt_info;
451 if (pvt->ovrfl_window)
452 iounmap(pvt->ovrfl_window);
453
454 if (pvt->ovrfl_pdev) {
455#ifdef CORRECT_BIOS
456 pci_release_regions(pvt->ovrfl_pdev);
457#endif /*CORRECT_BIOS */
458 pci_disable_device(pvt->ovrfl_pdev);
459 pci_dev_put(pvt->ovrfl_pdev);
460 }
461
462 if (edac_mc_del_mc(mci))
463 return;
464
465 edac_mc_free(mci);
466}
467
468
469static const struct pci_device_id i82875p_pci_tbl[] __devinitdata = {
470 {PCI_VEND_DEV(INTEL, 82875_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
471 I82875P},
472 {0,} /* 0 terminated list. */
473};
474
475MODULE_DEVICE_TABLE(pci, i82875p_pci_tbl);
476
477
478static struct pci_driver i82875p_driver = {
479 .name = BS_MOD_STR,
480 .probe = i82875p_init_one,
481 .remove = __devexit_p(i82875p_remove_one),
482 .id_table = i82875p_pci_tbl,
483};
484
485
Alan Coxda9bb1d2006-01-18 17:44:13 -0800486static int __init i82875p_init(void)
Alan Cox0d88a102006-01-18 17:44:10 -0800487{
488 int pci_rc;
489
490 debugf3("MC: " __FILE__ ": %s()\n", __func__);
491 pci_rc = pci_register_driver(&i82875p_driver);
492 if (pci_rc < 0)
493 return pci_rc;
494 if (mci_pdev == NULL) {
495 i82875p_registered = 0;
496 mci_pdev =
497 pci_get_device(PCI_VENDOR_ID_INTEL,
498 PCI_DEVICE_ID_INTEL_82875_0, NULL);
499 if (!mci_pdev) {
500 debugf0("875p pci_get_device fail\n");
501 return -ENODEV;
502 }
503 pci_rc = i82875p_init_one(mci_pdev, i82875p_pci_tbl);
504 if (pci_rc < 0) {
505 debugf0("875p init fail\n");
506 pci_dev_put(mci_pdev);
507 return -ENODEV;
508 }
509 }
510 return 0;
511}
512
513
514static void __exit i82875p_exit(void)
515{
516 debugf3("MC: " __FILE__ ": %s()\n", __func__);
517
518 pci_unregister_driver(&i82875p_driver);
519 if (!i82875p_registered) {
520 i82875p_remove_one(mci_pdev);
521 pci_dev_put(mci_pdev);
522 }
523}
524
525
526module_init(i82875p_init);
527module_exit(i82875p_exit);
528
529
530MODULE_LICENSE("GPL");
531MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh");
532MODULE_DESCRIPTION("MC support for Intel 82875 memory hub controllers");