blob: ae403597fd319e63327f0733eb1a779e4b208587 [file] [log] [blame]
Cliff Cai579e8ea2008-09-05 18:21:42 +08001config SND_BF5XX_I2S
2 tristate "SoC I2S Audio for the ADI BF5xx chip"
Takashi Iwai2caf6a12008-12-01 17:56:06 +01003 depends on BLACKFIN
Barry Song91056ac2011-01-11 20:04:28 -05004 select SND_BF5XX_SOC_SPORT
Cliff Cai579e8ea2008-09-05 18:21:42 +08005 help
6 Say Y or M if you want to add support for codecs attached to
7 the Blackfin SPORT (synchronous serial ports) interface in I2S
8 mode (supports single stereo In/Out).
9 You will also need to select the audio interfaces to support below.
10
11config SND_BF5XX_SOC_SSM2602
12 tristate "SoC SSM2602 Audio support for BF52x ezkit"
13 depends on SND_BF5XX_I2S
14 select SND_BF5XX_SOC_I2S
15 select SND_SOC_SSM2602
16 select I2C
Cliff Cai579e8ea2008-09-05 18:21:42 +080017 help
18 Say Y if you want to add support for SoC audio on BF527-EZKIT.
19
Cliff Cai5564b142008-09-27 22:31:21 +080020config SND_BF5XX_SOC_AD73311
21 tristate "SoC AD73311 Audio support for Blackfin"
22 depends on SND_BF5XX_I2S
23 select SND_BF5XX_SOC_I2S
24 select SND_SOC_AD73311
25 help
26 Say Y if you want to add support for AD73311 codec on Blackfin.
27
28config SND_BFIN_AD73311_SE
29 int "PF pin for AD73311L Chip Select"
30 depends on SND_BF5XX_SOC_AD73311
31 default 4
32 help
33 Enter the GPIO used to control AD73311's SE pin. Acceptable
34 values are 0 to 7
35
Barry Songdf1246d2009-10-01 01:33:30 -040036config SND_BF5XX_TDM
37 tristate "SoC I2S(TDM mode) Audio for the ADI BF5xx chip"
38 depends on (BLACKFIN && SND_SOC)
Barry Song91056ac2011-01-11 20:04:28 -050039 select SND_BF5XX_SOC_SPORT
Barry Songdf1246d2009-10-01 01:33:30 -040040 help
41 Say Y or M if you want to add support for codecs attached to
42 the Blackfin SPORT (synchronous serial ports) interface in TDM
43 mode.
44 You will also need to select the audio interfaces to support below.
45
46config SND_BF5XX_SOC_AD1836
47 tristate "SoC AD1836 Audio support for BF5xx"
48 depends on SND_BF5XX_TDM
49 select SND_BF5XX_SOC_TDM
50 select SND_SOC_AD1836
51 help
52 Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
53
Barry Song698c3752010-03-19 11:18:40 +080054config SND_BF5XX_SOC_AD193X
55 tristate "SoC AD193X Audio support for Blackfin"
Barry Songdf1246d2009-10-01 01:33:30 -040056 depends on SND_BF5XX_TDM
57 select SND_BF5XX_SOC_TDM
Barry Song698c3752010-03-19 11:18:40 +080058 select SND_SOC_AD193X
Barry Songdf1246d2009-10-01 01:33:30 -040059 help
Barry Song698c3752010-03-19 11:18:40 +080060 Say Y if you want to add support for AD193X codec on Blackfin.
61 This driver supports AD1936, AD1937, AD1938 and AD1939.
Barry Songdf1246d2009-10-01 01:33:30 -040062
Cliff Cai579e8ea2008-09-05 18:21:42 +080063config SND_BF5XX_AC97
64 tristate "SoC AC97 Audio for the ADI BF5xx chip"
Takashi Iwai2caf6a12008-12-01 17:56:06 +010065 depends on BLACKFIN
Barry Song91056ac2011-01-11 20:04:28 -050066 select AC97_BUS
67 select SND_SOC_AC97_BUS
68 select SND_BF5XX_SOC_SPORT
69 select SND_BF5XX_SOC_AC97
Cliff Cai579e8ea2008-09-05 18:21:42 +080070 help
71 Say Y or M if you want to add support for codecs attached to
72 the Blackfin SPORT (synchronous serial ports) interface in slot 16
73 mode (pseudo AC97 interface).
74 You will also need to select the audio interfaces to support below.
75
76 Note:
Matt LaPlante692105b2009-01-26 11:12:25 +010077 AC97 codecs which do not implement the slot-16 mode will not function
Cliff Cai579e8ea2008-09-05 18:21:42 +080078 properly with this driver. This driver is known to work with the
79 Analog Devices line of AC97 codecs.
80
Cliff Cai67f854b2008-11-18 16:18:17 +080081config SND_BF5XX_MMAP_SUPPORT
Cliff Cai579e8ea2008-09-05 18:21:42 +080082 bool "Enable MMAP Support"
83 depends on SND_BF5XX_AC97
84 default y
85 help
86 Say y if you want AC97 driver to support mmap mode.
87 We introduce an intermediate buffer to simulate mmap.
88
Cliff Cai67f854b2008-11-18 16:18:17 +080089config SND_BF5XX_MULTICHAN_SUPPORT
90 bool "Enable Multichannel Support"
91 depends on SND_BF5XX_AC97
92 default n
93 help
94 Say y if you want AC97 driver to support up to 5.1 channel audio.
95 this mode will consume much more memory for DMA.
96
Barry Songdf1246d2009-10-01 01:33:30 -040097config SND_BF5XX_HAVE_COLD_RESET
98 bool "BOARD has COLD Reset GPIO"
99 depends on SND_BF5XX_AC97
100 default y if BFIN548_EZKIT
101 default n if !BFIN548_EZKIT
102
103config SND_BF5XX_RESET_GPIO_NUM
104 int "Set a GPIO for cold reset"
105 depends on SND_BF5XX_HAVE_COLD_RESET
106 range 0 159
107 default 19 if BFIN548_EZKIT
108 default 5 if BFIN537_STAMP
109 default 0
110 help
111 Set the correct GPIO for RESET the sound chip.
112
113config SND_BF5XX_SOC_AD1980
Sonic Zhang2e2211a2010-08-07 12:06:07 -0400114 tristate "SoC AD1980/1 Audio support for BF5xx (Obsolete)"
Barry Songdf1246d2009-10-01 01:33:30 -0400115 depends on SND_BF5XX_AC97
116 select SND_BF5XX_SOC_AC97
117 select SND_SOC_AD1980
118 help
119 Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
120
Sonic Zhang2e2211a2010-08-07 12:06:07 -0400121 Warning:
122 Because Analog Devices Inc. discontinued the ad1980 sound chip since
123 Sep. 2009, this ad1980 driver is not maintained, tested and supported
124 by ADI now.
125
Cliff Cai579e8ea2008-09-05 18:21:42 +0800126config SND_BF5XX_SOC_SPORT
127 tristate
Cliff Cai67f854b2008-11-18 16:18:17 +0800128
Cliff Cai579e8ea2008-09-05 18:21:42 +0800129config SND_BF5XX_SOC_I2S
130 tristate
Cliff Cai579e8ea2008-09-05 18:21:42 +0800131
Barry Song01e2ab22009-07-27 18:06:39 +0800132config SND_BF5XX_SOC_TDM
133 tristate
Barry Song01e2ab22009-07-27 18:06:39 +0800134
Cliff Cai579e8ea2008-09-05 18:21:42 +0800135config SND_BF5XX_SOC_AC97
136 tristate
Cliff Cai579e8ea2008-09-05 18:21:42 +0800137
Cliff Cai579e8ea2008-09-05 18:21:42 +0800138config SND_BF5XX_SPORT_NUM
139 int "Set a SPORT for Sound chip"
Barry Song01e2ab22009-07-27 18:06:39 +0800140 depends on (SND_BF5XX_I2S || SND_BF5XX_AC97 || SND_BF5XX_TDM)
Cliff Cai579e8ea2008-09-05 18:21:42 +0800141 range 0 3 if BF54x
Mike Frysingera11311d2008-11-18 16:18:15 +0800142 range 0 1 if !BF54x
Cliff Cai579e8ea2008-09-05 18:21:42 +0800143 default 0
144 help
145 Set the correct SPORT for sound chip.